1 files changed, 2 insertions, 324 deletions

diff --git a/arch/x86/Kconfig.i386 b/arch/x86/Kconfig.i386
index b6f2fd0e443b..9fe63f10e57f 100644
--- a/arch/x86/Kconfig.i386
+++ b/arch/x86/Kconfig.i386
@@ -517,8 +517,6 @@ config X86_CPUID
           with major 203 and minors 0 to 31 for /dev/cpu/0/cpuid to
           /dev/cpu/31/cpuid.
 
-source "drivers/firmware/Kconfig"
-
 choice
         prompt "High Memory Support"
         default HIGHMEM4G if !X86_NUMAQ
@@ -957,328 +955,6 @@ config ARCH_ENABLE_MEMORY_HOTPLUG
         def_bool y
         depends on HIGHMEM
 
-menu "Power management options (ACPI, APM)"
-        depends on !X86_VOYAGER
-
-source kernel/power/Kconfig
-
-source "drivers/acpi/Kconfig"
-
-menuconfig APM
-        tristate "APM (Advanced Power Management) BIOS support"
-        depends on PM_SLEEP && !X86_VISWS
-        ---help---
-          APM is a BIOS specification for saving power using several different
-          techniques. This is mostly useful for battery powered laptops with
-          APM compliant BIOSes. If you say Y here, the system time will be
-          reset after a RESUME operation, the /proc/apm device will provide
-          battery status information, and user-space programs will receive
-          notification of APM "events" (e.g. battery status change).
-
-          If you select "Y" here, you can disable actual use of the APM
-          BIOS by passing the "apm=off" option to the kernel at boot time.
-
-          Note that the APM support is almost completely disabled for
-          machines with more than one CPU.
-
-          In order to use APM, you will need supporting software. For location
-          and more information, read <file:Documentation/pm.txt> and the
-          Battery Powered Linux mini-HOWTO, available from
-          <http://www.tldp.org/docs.html#howto>.
-
-          This driver does not spin down disk drives (see the hdparm(8)
-          manpage ("man 8 hdparm") for that), and it doesn't turn off
-          VESA-compliant "green" monitors.
-
-          This driver does not support the TI 4000M TravelMate and the ACER
-          486/DX4/75 because they don't have compliant BIOSes. Many "green"
-          desktop machines also don't have compliant BIOSes, and this driver
-          may cause those machines to panic during the boot phase.
-
-          Generally, if you don't have a battery in your machine, there isn't
-          much point in using this driver and you should say N. If you get
-          random kernel OOPSes or reboots that don't seem to be related to
-          anything, try disabling/enabling this option (or disabling/enabling
-          APM in your BIOS).
-
-          Some other things you should try when experiencing seemingly random,
-          "weird" problems:
-
-          1) make sure that you have enough swap space and that it is
-          enabled.
-          2) pass the "no-hlt" option to the kernel
-          3) switch on floating point emulation in the kernel and pass
-          the "no387" option to the kernel
-          4) pass the "floppy=nodma" option to the kernel
-          5) pass the "mem=4M" option to the kernel (thereby disabling
-          all but the first 4 MB of RAM)
-          6) make sure that the CPU is not over clocked.
-          7) read the sig11 FAQ at <http://www.bitwizard.nl/sig11/>
-          8) disable the cache from your BIOS settings
-          9) install a fan for the video card or exchange video RAM
-          10) install a better fan for the CPU
-          11) exchange RAM chips
-          12) exchange the motherboard.
-
-          To compile this driver as a module, choose M here: the
-          module will be called apm.
-
-if APM
-
-config APM_IGNORE_USER_SUSPEND
-        bool "Ignore USER SUSPEND"
-        help
-          This option will ignore USER SUSPEND requests. On machines with a
-          compliant APM BIOS, you want to say N. However, on the NEC Versa M
-          series notebooks, it is necessary to say Y because of a BIOS bug.
-
-config APM_DO_ENABLE
-        bool "Enable PM at boot time"
-        ---help---
-          Enable APM features at boot time. From page 36 of the APM BIOS
-          specification: "When disabled, the APM BIOS does not automatically
-          power manage devices, enter the Standby State, enter the Suspend
-          State, or take power saving steps in response to CPU Idle calls."
-          This driver will make CPU Idle calls when Linux is idle (unless this
-          feature is turned off -- see "Do CPU IDLE calls", below). This
-          should always save battery power, but more complicated APM features
-          will be dependent on your BIOS implementation. You may need to turn
-          this option off if your computer hangs at boot time when using APM
-          support, or if it beeps continuously instead of suspending. Turn
-          this off if you have a NEC UltraLite Versa 33/C or a Toshiba
-          T400CDT. This is off by default since most machines do fine without
-          this feature.
-
-config APM_CPU_IDLE
-        bool "Make CPU Idle calls when idle"
-        help
-          Enable calls to APM CPU Idle/CPU Busy inside the kernel's idle loop.
-          On some machines, this can activate improved power savings, such as
-          a slowed CPU clock rate, when the machine is idle. These idle calls
-          are made after the idle loop has run for some length of time (e.g.,
-          333 mS). On some machines, this will cause a hang at boot time or
-          whenever the CPU becomes idle. (On machines with more than one CPU,
-          this option does nothing.)
-
-config APM_DISPLAY_BLANK
-        bool "Enable console blanking using APM"
-        help
-          Enable console blanking using the APM. Some laptops can use this to
-          turn off the LCD backlight when the screen blanker of the Linux
-          virtual console blanks the screen. Note that this is only used by
-          the virtual console screen blanker, and won't turn off the backlight
-          when using the X Window system. This also doesn't have anything to
-          do with your VESA-compliant power-saving monitor. Further, this
-          option doesn't work for all laptops -- it might not turn off your
-          backlight at all, or it might print a lot of errors to the console,
-          especially if you are using gpm.
-
-config APM_ALLOW_INTS
-        bool "Allow interrupts during APM BIOS calls"
-        help
-          Normally we disable external interrupts while we are making calls to
-          the APM BIOS as a measure to lessen the effects of a badly behaving
-          BIOS implementation.  The BIOS should reenable interrupts if it
-          needs to.  Unfortunately, some BIOSes do not -- especially those in
-          many of the newer IBM Thinkpads.  If you experience hangs when you
-          suspend, try setting this to Y.  Otherwise, say N.
-
-config APM_REAL_MODE_POWER_OFF
-        bool "Use real mode APM BIOS call to power off"
-        help
-          Use real mode APM BIOS calls to switch off the computer. This is
-          a work-around for a number of buggy BIOSes. Switch this option on if
-          your computer crashes instead of powering off properly.
-
-endif # APM
-
-source "arch/x86/kernel/cpu/cpufreq/Kconfig"
-
-source "drivers/cpuidle/Kconfig"
-
-endmenu
-
-menu "Bus options (PCI, PCMCIA, EISA, MCA, ISA)"
-
-config PCI
-        bool "PCI support" if !X86_VISWS
-        depends on !X86_VOYAGER
-        default y if X86_VISWS
-        select ARCH_SUPPORTS_MSI if (X86_LOCAL_APIC && X86_IO_APIC)
-        help
-          Find out whether you have a PCI motherboard. PCI is the name of a
-          bus system, i.e. the way the CPU talks to the other stuff inside
-          your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
-          VESA. If you have PCI, say Y, otherwise N.
-
-          The PCI-HOWTO, available from
-          <http://www.tldp.org/docs.html#howto>, contains valuable
-          information about which PCI hardware does work under Linux and which
-          doesn't.
-
-choice
-        prompt "PCI access mode"
-        depends on PCI && !X86_VISWS
-        default PCI_GOANY
-        ---help---
-          On PCI systems, the BIOS can be used to detect the PCI devices and
-          determine their configuration. However, some old PCI motherboards
-          have BIOS bugs and may crash if this is done. Also, some embedded
-          PCI-based systems don't have any BIOS at all. Linux can also try to
-          detect the PCI hardware directly without using the BIOS.
-
-          With this option, you can specify how Linux should detect the
-          PCI devices. If you choose "BIOS", the BIOS will be used,
-          if you choose "Direct", the BIOS won't be used, and if you
-          choose "MMConfig", then PCI Express MMCONFIG will be used.
-          If you choose "Any", the kernel will try MMCONFIG, then the
-          direct access method and falls back to the BIOS if that doesn't
-          work. If unsure, go with the default, which is "Any".
-
-config PCI_GOBIOS
-        bool "BIOS"
-
-config PCI_GOMMCONFIG
-        bool "MMConfig"
-
-config PCI_GODIRECT
-        bool "Direct"
-
-config PCI_GOANY
-        bool "Any"
-
-endchoice
-
-config PCI_BIOS
-        bool
-        depends on !X86_VISWS && PCI && (PCI_GOBIOS || PCI_GOANY)
-        default y
-
-config PCI_DIRECT
-        bool
-        depends on PCI && ((PCI_GODIRECT || PCI_GOANY) || X86_VISWS)
-        default y
-
-config PCI_MMCONFIG
-        bool
-        depends on PCI && ACPI && (PCI_GOMMCONFIG || PCI_GOANY)
-        default y
-
-config PCI_DOMAINS
-        bool
-        depends on PCI
-        default y
-
-source "drivers/pci/pcie/Kconfig"
-
-source "drivers/pci/Kconfig"
-
-config ISA_DMA_API
-        bool
-        default y
-
-config ISA
-        bool "ISA support"
-        depends on !(X86_VOYAGER || X86_VISWS)
-        help
-          Find out whether you have ISA slots on your motherboard.  ISA is the
-          name of a bus system, i.e. the way the CPU talks to the other stuff
-          inside your box.  Other bus systems are PCI, EISA, MicroChannel
-          (MCA) or VESA.  ISA is an older system, now being displaced by PCI;
-          newer boards don't support it.  If you have ISA, say Y, otherwise N.
-
-config EISA
-        bool "EISA support"
-        depends on ISA
-        ---help---
-          The Extended Industry Standard Architecture (EISA) bus was
-          developed as an open alternative to the IBM MicroChannel bus.
-
-          The EISA bus provided some of the features of the IBM MicroChannel
-          bus while maintaining backward compatibility with cards made for
-          the older ISA bus.  The EISA bus saw limited use between 1988 and
-          1995 when it was made obsolete by the PCI bus.
-
-          Say Y here if you are building a kernel for an EISA-based machine.
-
-          Otherwise, say N.
-
-source "drivers/eisa/Kconfig"
-
-config MCA
-        bool "MCA support" if !(X86_VISWS || X86_VOYAGER)
-        default y if X86_VOYAGER
-        help
-          MicroChannel Architecture is found in some IBM PS/2 machines and
-          laptops.  It is a bus system similar to PCI or ISA. See
-          <file:Documentation/mca.txt> (and especially the web page given
-          there) before attempting to build an MCA bus kernel.
-
-source "drivers/mca/Kconfig"
-
-config SCx200
-        tristate "NatSemi SCx200 support"
-        depends on !X86_VOYAGER
-        help
-          This provides basic support for National Semiconductor's
-          (now AMD's) Geode processors.  The driver probes for the
-          PCI-IDs of several on-chip devices, so its a good dependency
-          for other scx200_* drivers.
-
-          If compiled as a module, the driver is named scx200.
-
-config SCx200HR_TIMER
-        tristate "NatSemi SCx200 27MHz High-Resolution Timer Support"
-        depends on SCx200 && GENERIC_TIME
-        default y
-        help
-          This driver provides a clocksource built upon the on-chip
-          27MHz high-resolution timer.  Its also a workaround for
-          NSC Geode SC-1100's buggy TSC, which loses time when the
-          processor goes idle (as is done by the scheduler).  The
-          other workaround is idle=poll boot option.
-
-config GEODE_MFGPT_TIMER
-        bool "Geode Multi-Function General Purpose Timer (MFGPT) events"
-        depends on MGEODE_LX && GENERIC_TIME && GENERIC_CLOCKEVENTS
-        default y
-        help
-          This driver provides a clock event source based on the MFGPT
-          timer(s) in the CS5535 and CS5536 companion chip for the geode.
-          MFGPTs have a better resolution and max interval than the
-          generic PIT, and are suitable for use as high-res timers.
-
-config K8_NB
-        def_bool y
-        depends on AGP_AMD64
-
-source "drivers/pcmcia/Kconfig"
-
-source "drivers/pci/hotplug/Kconfig"
-
-endmenu
-
-menu "Executable file formats"
-
-source "fs/Kconfig.binfmt"
-
-endmenu
-
-source "net/Kconfig"
-
-source "drivers/Kconfig"
-
-source "fs/Kconfig"
-
-source "kernel/Kconfig.instrumentation"
-
-source "arch/x86/Kconfig.debug"
-
-source "security/Kconfig"
-
-source "crypto/Kconfig"
-
-source "lib/Kconfig"
 
 #
 # Use the generic interrupt handling code in kernel/irq/:
@@ -1319,3 +995,5 @@ config X86_TRAMPOLINE
 config KTIME_SCALAR
         bool
         default y
+
+source "arch/x86/Kconfig"