1 files changed, 39 insertions, 41 deletions

diff --git a/arch/x86/Kconfig.cpu b/arch/x86/Kconfig.cpu
index c98d52e82966..a95eaf0e582a 100644
--- a/arch/x86/Kconfig.cpu
+++ b/arch/x86/Kconfig.cpu
@@ -50,7 +50,7 @@ config M386
 config M486
         bool "486"
         depends on X86_32
-        help
+        ---help---
           Select this for a 486 series processor, either Intel or one of the
           compatible processors from AMD, Cyrix, IBM, or Intel.  Includes DX,
           DX2, and DX4 variants; also SL/SLC/SLC2/SLC3/SX/SX2 and UMC U5D or
@@ -59,7 +59,7 @@ config M486
 config M586
         bool "586/K5/5x86/6x86/6x86MX"
         depends on X86_32
-        help
+        ---help---
           Select this for an 586 or 686 series processor such as the AMD K5,
           the Cyrix 5x86, 6x86 and 6x86MX.  This choice does not
           assume the RDTSC (Read Time Stamp Counter) instruction.
@@ -67,21 +67,21 @@ config M586
 config M586TSC
         bool "Pentium-Classic"
         depends on X86_32
-        help
+        ---help---
           Select this for a Pentium Classic processor with the RDTSC (Read
           Time Stamp Counter) instruction for benchmarking.
 
 config M586MMX
         bool "Pentium-MMX"
         depends on X86_32
-        help
+        ---help---
           Select this for a Pentium with the MMX graphics/multimedia
           extended instructions.
 
 config M686
         bool "Pentium-Pro"
         depends on X86_32
-        help
+        ---help---
           Select this for Intel Pentium Pro chips.  This enables the use of
           Pentium Pro extended instructions, and disables the init-time guard
           against the f00f bug found in earlier Pentiums.
@@ -89,7 +89,7 @@ config M686
 config MPENTIUMII
         bool "Pentium-II/Celeron(pre-Coppermine)"
         depends on X86_32
-        help
+        ---help---
           Select this for Intel chips based on the Pentium-II and
           pre-Coppermine Celeron core.  This option enables an unaligned
           copy optimization, compiles the kernel with optimization flags
@@ -99,7 +99,7 @@ config MPENTIUMII
 config MPENTIUMIII
         bool "Pentium-III/Celeron(Coppermine)/Pentium-III Xeon"
         depends on X86_32
-        help
+        ---help---
           Select this for Intel chips based on the Pentium-III and
           Celeron-Coppermine core.  This option enables use of some
           extended prefetch instructions in addition to the Pentium II
@@ -108,14 +108,14 @@ config MPENTIUMIII
 config MPENTIUMM
         bool "Pentium M"
         depends on X86_32
-        help
+        ---help---
           Select this for Intel Pentium M (not Pentium-4 M)
           notebook chips.
 
 config MPENTIUM4
         bool "Pentium-4/Celeron(P4-based)/Pentium-4 M/older Xeon"
         depends on X86_32
-        help
+        ---help---
           Select this for Intel Pentium 4 chips.  This includes the
           Pentium 4, Pentium D, P4-based Celeron and Xeon, and
           Pentium-4 M (not Pentium M) chips.  This option enables compile
@@ -151,7 +151,7 @@ config MPENTIUM4
 config MK6
         bool "K6/K6-II/K6-III"
         depends on X86_32
-        help
+        ---help---
           Select this for an AMD K6-family processor.  Enables use of
           some extended instructions, and passes appropriate optimization
           flags to GCC.
@@ -159,14 +159,14 @@ config MK6
 config MK7
         bool "Athlon/Duron/K7"
         depends on X86_32
-        help
+        ---help---
           Select this for an AMD Athlon K7-family processor.  Enables use of
           some extended instructions, and passes appropriate optimization
           flags to GCC.
 
 config MK8
         bool "Opteron/Athlon64/Hammer/K8"
-        help
+        ---help---
           Select this for an AMD Opteron or Athlon64 Hammer-family processor.
           Enables use of some extended instructions, and passes appropriate
           optimization flags to GCC.
@@ -174,7 +174,7 @@ config MK8
 config MCRUSOE
         bool "Crusoe"
         depends on X86_32
-        help
+        ---help---
           Select this for a Transmeta Crusoe processor.  Treats the processor
           like a 586 with TSC, and sets some GCC optimization flags (like a
           Pentium Pro with no alignment requirements).
@@ -182,13 +182,13 @@ config MCRUSOE
 config MEFFICEON
         bool "Efficeon"
         depends on X86_32
-        help
+        ---help---
           Select this for a Transmeta Efficeon processor.
 
 config MWINCHIPC6
         bool "Winchip-C6"
         depends on X86_32
-        help
+        ---help---
           Select this for an IDT Winchip C6 chip.  Linux and GCC
           treat this chip as a 586TSC with some extended instructions
           and alignment requirements.
@@ -196,7 +196,7 @@ config MWINCHIPC6
 config MWINCHIP3D
         bool "Winchip-2/Winchip-2A/Winchip-3"
         depends on X86_32
-        help
+        ---help---
           Select this for an IDT Winchip-2, 2A or 3.  Linux and GCC
           treat this chip as a 586TSC with some extended instructions
           and alignment requirements.  Also enable out of order memory
@@ -206,19 +206,19 @@ config MWINCHIP3D
 config MGEODEGX1
         bool "GeodeGX1"
         depends on X86_32
-        help
+        ---help---
           Select this for a Geode GX1 (Cyrix MediaGX) chip.
 
 config MGEODE_LX
         bool "Geode GX/LX"
         depends on X86_32
-        help
+        ---help---
           Select this for AMD Geode GX and LX processors.
 
 config MCYRIXIII
         bool "CyrixIII/VIA-C3"
         depends on X86_32
-        help
+        ---help---
           Select this for a Cyrix III or C3 chip.  Presently Linux and GCC
           treat this chip as a generic 586. Whilst the CPU is 686 class,
           it lacks the cmov extension which gcc assumes is present when
@@ -230,7 +230,7 @@ config MCYRIXIII
 config MVIAC3_2
         bool "VIA C3-2 (Nehemiah)"
         depends on X86_32
-        help
+        ---help---
           Select this for a VIA C3 "Nehemiah". Selecting this enables usage
           of SSE and tells gcc to treat the CPU as a 686.
           Note, this kernel will not boot on older (pre model 9) C3s.
@@ -238,14 +238,14 @@ config MVIAC3_2
 config MVIAC7
         bool "VIA C7"
         depends on X86_32
-        help
+        ---help---
           Select this for a VIA C7.  Selecting this uses the correct cache
           shift and tells gcc to treat the CPU as a 686.
 
 config MPSC
         bool "Intel P4 / older Netburst based Xeon"
         depends on X86_64
-        help
+        ---help---
           Optimize for Intel Pentium 4, Pentium D and older Nocona/Dempsey
           Xeon CPUs with Intel 64bit which is compatible with x86-64.
           Note that the latest Xeons (Xeon 51xx and 53xx) are not based on the
@@ -255,7 +255,7 @@ config MPSC
 
 config MCORE2
         bool "Core 2/newer Xeon"
-        help
+        ---help---
 
           Select this for Intel Core 2 and newer Core 2 Xeons (Xeon 51xx and
           53xx) CPUs. You can distinguish newer from older Xeons by the CPU
@@ -265,7 +265,7 @@ config MCORE2
 config GENERIC_CPU
         bool "Generic-x86-64"
         depends on X86_64
-        help
+        ---help---
           Generic x86-64 CPU.
           Run equally well on all x86-64 CPUs.
 
@@ -274,7 +274,7 @@ endchoice
 config X86_GENERIC
         bool "Generic x86 support"
         depends on X86_32
-        help
+        ---help---
           Instead of just including optimizations for the selected
           x86 variant (e.g. PII, Crusoe or Athlon), include some more
           generic optimizations as well. This will make the kernel
@@ -294,25 +294,23 @@ config X86_CPU
 # Define implied options from the CPU selection here
 config X86_L1_CACHE_BYTES
         int
-        default "128" if GENERIC_CPU || MPSC
-        default "64" if MK8 || MCORE2
-        depends on X86_64
+        default "128" if MPSC
+        default "64" if GENERIC_CPU || MK8 || MCORE2 || X86_32
 
 config X86_INTERNODE_CACHE_BYTES
         int
         default "4096" if X86_VSMP
         default X86_L1_CACHE_BYTES if !X86_VSMP
-        depends on X86_64
 
 config X86_CMPXCHG
         def_bool X86_64 || (X86_32 && !M386)
 
 config X86_L1_CACHE_SHIFT
         int
-        default "7" if MPENTIUM4 || X86_GENERIC || GENERIC_CPU || MPSC
+        default "7" if MPENTIUM4 || MPSC
         default "4" if X86_ELAN || M486 || M386 || MGEODEGX1
         default "5" if MWINCHIP3D || MWINCHIPC6 || MCRUSOE || MEFFICEON || MCYRIXIII || MK6 || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || M586 || MVIAC3_2 || MGEODE_LX
-        default "6" if MK7 || MK8 || MPENTIUMM || MCORE2 || MVIAC7
+        default "6" if MK7 || MK8 || MPENTIUMM || MCORE2 || MVIAC7 || X86_GENERIC || GENERIC_CPU
 
 config X86_XADD
         def_bool y
@@ -321,7 +319,7 @@ config X86_XADD
 config X86_PPRO_FENCE
         bool "PentiumPro memory ordering errata workaround"
         depends on M686 || M586MMX || M586TSC || M586 || M486 || M386 || MGEODEGX1
-        help
+        ---help---
           Old PentiumPro multiprocessor systems had errata that could cause
           memory operations to violate the x86 ordering standard in rare cases.
           Enabling this option will attempt to work around some (but not all)
@@ -414,14 +412,14 @@ config X86_DEBUGCTLMSR
 
 menuconfig PROCESSOR_SELECT
         bool "Supported processor vendors" if EMBEDDED
-        help
+        ---help---
           This lets you choose what x86 vendor support code your kernel
           will include.
 
 config CPU_SUP_INTEL
         default y
         bool "Support Intel processors" if PROCESSOR_SELECT
-        help
+        ---help---
           This enables detection, tunings and quirks for Intel processors
 
           You need this enabled if you want your kernel to run on an
@@ -435,7 +433,7 @@ config CPU_SUP_CYRIX_32
         default y
         bool "Support Cyrix processors" if PROCESSOR_SELECT
         depends on !64BIT
-        help
+        ---help---
           This enables detection, tunings and quirks for Cyrix processors
 
           You need this enabled if you want your kernel to run on a
@@ -448,7 +446,7 @@ config CPU_SUP_CYRIX_32
 config CPU_SUP_AMD
         default y
         bool "Support AMD processors" if PROCESSOR_SELECT
-        help
+        ---help---
           This enables detection, tunings and quirks for AMD processors
 
           You need this enabled if you want your kernel to run on an
@@ -462,7 +460,7 @@ config CPU_SUP_CENTAUR_32
         default y
         bool "Support Centaur processors" if PROCESSOR_SELECT
         depends on !64BIT
-        help
+        ---help---
           This enables detection, tunings and quirks for Centaur processors
 
           You need this enabled if you want your kernel to run on a
@@ -476,7 +474,7 @@ config CPU_SUP_CENTAUR_64
         default y
         bool "Support Centaur processors" if PROCESSOR_SELECT
         depends on 64BIT
-        help
+        ---help---
           This enables detection, tunings and quirks for Centaur processors
 
           You need this enabled if you want your kernel to run on a
@@ -490,7 +488,7 @@ config CPU_SUP_TRANSMETA_32
         default y
         bool "Support Transmeta processors" if PROCESSOR_SELECT
         depends on !64BIT
-        help
+        ---help---
           This enables detection, tunings and quirks for Transmeta processors
 
           You need this enabled if you want your kernel to run on a
@@ -504,7 +502,7 @@ config CPU_SUP_UMC_32
         default y
         bool "Support UMC processors" if PROCESSOR_SELECT
         depends on !64BIT
-        help
+        ---help---
           This enables detection, tunings and quirks for UMC processors
 
           You need this enabled if you want your kernel to run on a
@@ -523,7 +521,7 @@ config X86_PTRACE_BTS
         bool "Branch Trace Store"
         default y
         depends on X86_DEBUGCTLMSR
-        help
+        ---help---
           This adds a ptrace interface to the hardware's branch trace store.
 
           Debuggers may use it to collect an execution trace of the debugged