1 files changed, 0 insertions, 69 deletions

diff --git a/arch/v850/kernel/ma.c b/arch/v850/kernel/ma.c
deleted file mode 100644
index 143774de75e1..000000000000
--- a/arch/v850/kernel/ma.c
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- * arch/v850/kernel/ma.c -- V850E/MA series of cpu chips
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/swap.h>
-#include <linux/bootmem.h>
-#include <linux/irq.h>
-
-#include <asm/atomic.h>
-#include <asm/page.h>
-#include <asm/machdep.h>
-#include <asm/v850e_timer_d.h>
-
-#include "mach.h"
-
-void __init mach_sched_init (struct irqaction *timer_action)
-{
-        /* Start hardware timer.  */
-        v850e_timer_d_configure (0, HZ);
-        /* Install timer interrupt handler.  */
-        setup_irq (IRQ_INTCMD(0), timer_action);
-}
-
-static struct v850e_intc_irq_init irq_inits[] = {
-        { "IRQ", 0,             NUM_MACH_IRQS,  1, 7 },
-        { "CMD", IRQ_INTCMD(0), IRQ_INTCMD_NUM, 1, 5 },
-        { "DMA", IRQ_INTDMA(0), IRQ_INTDMA_NUM, 1, 2 },
-        { "CSI", IRQ_INTCSI(0), IRQ_INTCSI_NUM, 4, 4 },
-        { "SER", IRQ_INTSER(0), IRQ_INTSER_NUM, 4, 3 },
-        { "SR",  IRQ_INTSR(0),  IRQ_INTSR_NUM,  4, 4 },
-        { "ST",  IRQ_INTST(0),  IRQ_INTST_NUM,  4, 5 },
-        { 0 }
-};
-#define NUM_IRQ_INITS (ARRAY_SIZE(irq_inits) - 1)
-
-static struct hw_interrupt_type hw_itypes[NUM_IRQ_INITS];
-
-/* Initialize MA chip interrupts.  */
-void __init ma_init_irqs (void)
-{
-        v850e_intc_init_irq_types (irq_inits, hw_itypes);
-}
-
-/* Called before configuring an on-chip UART.  */
-void ma_uart_pre_configure (unsigned chan, unsigned cflags, unsigned baud)
-{
-        /* We only know about the first two UART channels (though
-           specific chips may have more).  */
-        if (chan < 2) {
-                unsigned bits = 0x3 << (chan * 3);
-                /* Specify that the relevant pins on the chip should do
-                   serial I/O, not direct I/O.  */
-                MA_PORT4_PMC |= bits;
-                /* Specify that we're using the UART, not the CSI device.  */
-                MA_PORT4_PFC |= bits;
-        }
-}