1 files changed, 102 insertions, 0 deletions

diff --git a/arch/tile/lib/cacheflush.c b/arch/tile/lib/cacheflush.c
index 11b6164c2097..35c1d8ca5f38 100644
--- a/arch/tile/lib/cacheflush.c
+++ b/arch/tile/lib/cacheflush.c
@@ -21,3 +21,105 @@ void __flush_icache_range(unsigned long start, unsigned long end)
 {
         invalidate_icache((const void *)start, end - start, PAGE_SIZE);
 }
+
+
+/* Force a load instruction to issue. */
+static inline void force_load(char *p)
+{
+        *(volatile char *)p;
+}
+
+/*
+ * Flush and invalidate a VA range that is homed remotely on a single
+ * core (if "!hfh") or homed via hash-for-home (if "hfh"), waiting
+ * until the memory controller holds the flushed values.
+ */
+void finv_buffer_remote(void *buffer, size_t size, int hfh)
+{
+        char *p, *base;
+        size_t step_size, load_count;
+        const unsigned long STRIPE_WIDTH = 8192;
+
+        /*
+         * Flush and invalidate the buffer out of the local L1/L2
+         * and request the home cache to flush and invalidate as well.
+         */
+        __finv_buffer(buffer, size);
+
+        /*
+         * Wait for the home cache to acknowledge that it has processed
+         * all the flush-and-invalidate requests.  This does not mean
+         * that the flushed data has reached the memory controller yet,
+         * but it does mean the home cache is processing the flushes.
+         */
+        __insn_mf();
+
+        /*
+         * Issue a load to the last cache line, which can't complete
+         * until all the previously-issued flushes to the same memory
+         * controller have also completed.  If we weren't striping
+         * memory, that one load would be sufficient, but since we may
+         * be, we also need to back up to the last load issued to
+         * another memory controller, which would be the point where
+         * we crossed an 8KB boundary (the granularity of striping
+         * across memory controllers).  Keep backing up and doing this
+         * until we are before the beginning of the buffer, or have
+         * hit all the controllers.
+         *
+         * If we are flushing a hash-for-home buffer, it's even worse.
+         * Each line may be homed on a different tile, and each tile
+         * may have up to four lines that are on different
+         * controllers.  So as we walk backwards, we have to touch
+         * enough cache lines to satisfy these constraints.  In
+         * practice this ends up being close enough to "load from
+         * every cache line on a full memory stripe on each
+         * controller" that we simply do that, to simplify the logic.
+         *
+         * FIXME: See bug 9535 for some issues with this code.
+         */
+        if (hfh) {
+                step_size = L2_CACHE_BYTES;
+                load_count = (STRIPE_WIDTH / L2_CACHE_BYTES) *
+                              (1 << CHIP_LOG_NUM_MSHIMS());
+        } else {
+                step_size = STRIPE_WIDTH;
+                load_count = (1 << CHIP_LOG_NUM_MSHIMS());
+        }
+
+        /* Load the last byte of the buffer. */
+        p = (char *)buffer + size - 1;
+        force_load(p);
+
+        /* Bump down to the end of the previous stripe or cache line. */
+        p -= step_size;
+        p = (char *)((unsigned long)p | (step_size - 1));
+
+        /* Figure out how far back we need to go. */
+        base = p - (step_size * (load_count - 2));
+        if ((long)base < (long)buffer)
+                base = buffer;
+
+        /*
+         * Fire all the loads we need.  The MAF only has eight entries
+         * so we can have at most eight outstanding loads, so we
+         * unroll by that amount.
+         */
+#pragma unroll 8
+        for (; p >= base; p -= step_size)
+                force_load(p);
+
+        /*
+         * Repeat, but with inv's instead of loads, to get rid of the
+         * data we just loaded into our own cache and the old home L3.
+         * No need to unroll since inv's don't target a register.
+         */
+        p = (char *)buffer + size - 1;
+        __insn_inv(p);
+        p -= step_size;
+        p = (char *)((unsigned long)p | (step_size - 1));
+        for (; p >= base; p -= step_size)
+                __insn_inv(p);
+
+        /* Wait for the load+inv's (and thus finvs) to have completed. */
+        __insn_mf();
+}