1 files changed, 205 insertions, 0 deletions

diff --git a/arch/sparc/include/asm/dma_64.h b/arch/sparc/include/asm/dma_64.h
new file mode 100644
index 000000000000..46a8aecffc02
--- /dev/null
+++ b/arch/sparc/include/asm/dma_64.h
@@ -0,0 +1,205 @@
+/*
+ * include/asm/dma.h
+ *
+ * Copyright 1996 (C) David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _ASM_SPARC64_DMA_H
+#define _ASM_SPARC64_DMA_H
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/spinlock.h>
+
+#include <asm/sbus.h>
+#include <asm/delay.h>
+#include <asm/oplib.h>
+
+/* These are irrelevant for Sparc DMA, but we leave it in so that
+ * things can compile.
+ */
+#define MAX_DMA_CHANNELS 8
+#define DMA_MODE_READ    1
+#define DMA_MODE_WRITE   2
+#define MAX_DMA_ADDRESS  (~0UL)
+
+/* Useful constants */
+#define SIZE_16MB      (16*1024*1024)
+#define SIZE_64K       (64*1024)
+
+/* SBUS DMA controller reg offsets */
+#define DMA_CSR         0x00UL          /* rw  DMA control/status register    0x00   */
+#define DMA_ADDR        0x04UL          /* rw  DMA transfer address register  0x04   */
+#define DMA_COUNT       0x08UL          /* rw  DMA transfer count register    0x08   */
+#define DMA_TEST        0x0cUL          /* rw  DMA test/debug register        0x0c   */
+
+/* DVMA chip revisions */
+enum dvma_rev {
+        dvmarev0,
+        dvmaesc1,
+        dvmarev1,
+        dvmarev2,
+        dvmarev3,
+        dvmarevplus,
+        dvmahme
+};
+
+#define DMA_HASCOUNT(rev)  ((rev)==dvmaesc1)
+
+/* Linux DMA information structure, filled during probe. */
+struct sbus_dma {
+        struct sbus_dma *next;
+        struct sbus_dev *sdev;
+        void __iomem *regs;
+
+        /* Status, misc info */
+        int node;                /* Prom node for this DMA device */
+        int running;             /* Are we doing DMA now? */
+        int allocated;           /* Are we "owned" by anyone yet? */
+
+        /* Transfer information. */
+        u32 addr;                /* Start address of current transfer */
+        int nbytes;              /* Size of current transfer */
+        int realbytes;           /* For splitting up large transfers, etc. */
+
+        /* DMA revision */
+        enum dvma_rev revision;
+};
+
+extern struct sbus_dma *dma_chain;
+
+/* Broken hardware... */
+#define DMA_ISBROKEN(dma)    ((dma)->revision == dvmarev1)
+#define DMA_ISESC1(dma)      ((dma)->revision == dvmaesc1)
+
+/* Main routines in dma.c */
+extern void dvma_init(struct sbus_bus *);
+
+/* Fields in the cond_reg register */
+/* First, the version identification bits */
+#define DMA_DEVICE_ID    0xf0000000        /* Device identification bits */
+#define DMA_VERS0        0x00000000        /* Sunray DMA version */
+#define DMA_ESCV1        0x40000000        /* DMA ESC Version 1 */
+#define DMA_VERS1        0x80000000        /* DMA rev 1 */
+#define DMA_VERS2        0xa0000000        /* DMA rev 2 */
+#define DMA_VERHME       0xb0000000        /* DMA hme gate array */
+#define DMA_VERSPLUS     0x90000000        /* DMA rev 1 PLUS */
+
+#define DMA_HNDL_INTR    0x00000001        /* An IRQ needs to be handled */
+#define DMA_HNDL_ERROR   0x00000002        /* We need to take an error */
+#define DMA_FIFO_ISDRAIN 0x0000000c        /* The DMA FIFO is draining */
+#define DMA_INT_ENAB     0x00000010        /* Turn on interrupts */
+#define DMA_FIFO_INV     0x00000020        /* Invalidate the FIFO */
+#define DMA_ACC_SZ_ERR   0x00000040        /* The access size was bad */
+#define DMA_FIFO_STDRAIN 0x00000040        /* DMA_VERS1 Drain the FIFO */
+#define DMA_RST_SCSI     0x00000080        /* Reset the SCSI controller */
+#define DMA_RST_ENET     DMA_RST_SCSI      /* Reset the ENET controller */
+#define DMA_ST_WRITE     0x00000100        /* write from device to memory */
+#define DMA_ENABLE       0x00000200        /* Fire up DMA, handle requests */
+#define DMA_PEND_READ    0x00000400        /* DMA_VERS1/0/PLUS Pending Read */
+#define DMA_ESC_BURST    0x00000800        /* 1=16byte 0=32byte */
+#define DMA_READ_AHEAD   0x00001800        /* DMA read ahead partial longword */
+#define DMA_DSBL_RD_DRN  0x00001000        /* No EC drain on slave reads */
+#define DMA_BCNT_ENAB    0x00002000        /* If on, use the byte counter */
+#define DMA_TERM_CNTR    0x00004000        /* Terminal counter */
+#define DMA_SCSI_SBUS64  0x00008000        /* HME: Enable 64-bit SBUS mode. */
+#define DMA_CSR_DISAB    0x00010000        /* No FIFO drains during csr */
+#define DMA_SCSI_DISAB   0x00020000        /* No FIFO drains during reg */
+#define DMA_DSBL_WR_INV  0x00020000        /* No EC inval. on slave writes */
+#define DMA_ADD_ENABLE   0x00040000        /* Special ESC DVMA optimization */
+#define DMA_E_BURSTS     0x000c0000        /* ENET: SBUS r/w burst mask */
+#define DMA_E_BURST32    0x00040000        /* ENET: SBUS 32 byte r/w burst */
+#define DMA_E_BURST16    0x00000000        /* ENET: SBUS 16 byte r/w burst */
+#define DMA_BRST_SZ      0x000c0000        /* SCSI: SBUS r/w burst size */
+#define DMA_BRST64       0x000c0000        /* SCSI: 64byte bursts (HME on UltraSparc only) */
+#define DMA_BRST32       0x00040000        /* SCSI: 32byte bursts */
+#define DMA_BRST16       0x00000000        /* SCSI: 16byte bursts */
+#define DMA_BRST0        0x00080000        /* SCSI: no bursts (non-HME gate arrays) */
+#define DMA_ADDR_DISAB   0x00100000        /* No FIFO drains during addr */
+#define DMA_2CLKS        0x00200000        /* Each transfer = 2 clock ticks */
+#define DMA_3CLKS        0x00400000        /* Each transfer = 3 clock ticks */
+#define DMA_EN_ENETAUI   DMA_3CLKS         /* Put lance into AUI-cable mode */
+#define DMA_CNTR_DISAB   0x00800000        /* No IRQ when DMA_TERM_CNTR set */
+#define DMA_AUTO_NADDR   0x01000000        /* Use "auto nxt addr" feature */
+#define DMA_SCSI_ON      0x02000000        /* Enable SCSI dma */
+#define DMA_PARITY_OFF   0x02000000        /* HME: disable parity checking */
+#define DMA_LOADED_ADDR  0x04000000        /* Address has been loaded */
+#define DMA_LOADED_NADDR 0x08000000        /* Next address has been loaded */
+#define DMA_RESET_FAS366 0x08000000        /* HME: Assert RESET to FAS366 */
+
+/* Values describing the burst-size property from the PROM */
+#define DMA_BURST1       0x01
+#define DMA_BURST2       0x02
+#define DMA_BURST4       0x04
+#define DMA_BURST8       0x08
+#define DMA_BURST16      0x10
+#define DMA_BURST32      0x20
+#define DMA_BURST64      0x40
+#define DMA_BURSTBITS    0x7f
+
+/* Determine highest possible final transfer address given a base */
+#define DMA_MAXEND(addr) (0x01000000UL-(((unsigned long)(addr))&0x00ffffffUL))
+
+/* Yes, I hack a lot of elisp in my spare time... */
+#define DMA_ERROR_P(regs)  ((sbus_readl((regs) + DMA_CSR) & DMA_HNDL_ERROR))
+#define DMA_IRQ_P(regs)    ((sbus_readl((regs) + DMA_CSR)) & (DMA_HNDL_INTR | DMA_HNDL_ERROR))
+#define DMA_WRITE_P(regs)  ((sbus_readl((regs) + DMA_CSR) & DMA_ST_WRITE))
+#define DMA_OFF(__regs)         \
+do {    u32 tmp = sbus_readl((__regs) + DMA_CSR); \
+        tmp &= ~DMA_ENABLE; \
+        sbus_writel(tmp, (__regs) + DMA_CSR); \
+} while(0)
+#define DMA_INTSOFF(__regs)     \
+do {    u32 tmp = sbus_readl((__regs) + DMA_CSR); \
+        tmp &= ~DMA_INT_ENAB; \
+        sbus_writel(tmp, (__regs) + DMA_CSR); \
+} while(0)
+#define DMA_INTSON(__regs)      \
+do {    u32 tmp = sbus_readl((__regs) + DMA_CSR); \
+        tmp |= DMA_INT_ENAB; \
+        sbus_writel(tmp, (__regs) + DMA_CSR); \
+} while(0)
+#define DMA_PUNTFIFO(__regs)    \
+do {    u32 tmp = sbus_readl((__regs) + DMA_CSR); \
+        tmp |= DMA_FIFO_INV; \
+        sbus_writel(tmp, (__regs) + DMA_CSR); \
+} while(0)
+#define DMA_SETSTART(__regs, __addr)    \
+        sbus_writel((u32)(__addr), (__regs) + DMA_ADDR);
+#define DMA_BEGINDMA_W(__regs)  \
+do {    u32 tmp = sbus_readl((__regs) + DMA_CSR); \
+        tmp |= (DMA_ST_WRITE|DMA_ENABLE|DMA_INT_ENAB); \
+        sbus_writel(tmp, (__regs) + DMA_CSR); \
+} while(0)
+#define DMA_BEGINDMA_R(__regs)  \
+do {    u32 tmp = sbus_readl((__regs) + DMA_CSR); \
+        tmp |= (DMA_ENABLE|DMA_INT_ENAB); \
+        tmp &= ~DMA_ST_WRITE; \
+        sbus_writel(tmp, (__regs) + DMA_CSR); \
+} while(0)
+
+/* For certain DMA chips, we need to disable ints upon irq entry
+ * and turn them back on when we are done.  So in any ESP interrupt
+ * handler you *must* call DMA_IRQ_ENTRY upon entry and DMA_IRQ_EXIT
+ * when leaving the handler.  You have been warned...
+ */
+#define DMA_IRQ_ENTRY(dma, dregs) do { \
+        if(DMA_ISBROKEN(dma)) DMA_INTSOFF(dregs); \
+   } while (0)
+
+#define DMA_IRQ_EXIT(dma, dregs) do { \
+        if(DMA_ISBROKEN(dma)) DMA_INTSON(dregs); \
+   } while(0)
+
+#define for_each_dvma(dma) \
+        for((dma) = dma_chain; (dma); (dma) = (dma)->next)
+
+/* From PCI */
+
+#ifdef CONFIG_PCI
+extern int isa_dma_bridge_buggy;
+#else
+#define isa_dma_bridge_buggy    (0)
+#endif
+
+#endif /* !(_ASM_SPARC64_DMA_H) */