1 files changed, 390 insertions, 135 deletions

diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
index e594559c8dba..0a94d9c9cde1 100644
--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@@ -4,21 +4,116 @@
 
 mainmenu "Linux/SPARC Kernel Configuration"
 
+config SPARC
+        bool
+        default y
+        select HAVE_IDE
+        select HAVE_OPROFILE
+        select HAVE_ARCH_KGDB if !SMP || SPARC64
+        select HAVE_ARCH_TRACEHOOK
+        select ARCH_WANT_OPTIONAL_GPIOLIB
+        select RTC_CLASS
+        select RTC_DRV_M48T59
+
+# Identify this as a Sparc32 build
+config SPARC32
+        bool
+        default y if ARCH = "sparc"
+        help
+          SPARC is a family of RISC microprocessors designed and marketed by
+          Sun Microsystems, incorporated.  They are very widely found in Sun
+          workstations and clones. This port covers the original 32-bit SPARC;
+          it is old and stable and usually considered one of the "big three"
+          along with the Intel and Alpha ports.  The UltraLinux project
+          maintains both the SPARC32 and SPARC64 ports; its web page is
+          available at <http://www.ultralinux.org/>.
+
+config SPARC64
+        bool
+        default y if ARCH = "sparc64"
+        select ARCH_SUPPORTS_MSI
+        select HAVE_FUNCTION_TRACER
+        select HAVE_KRETPROBES
+        select HAVE_KPROBES
+        select HAVE_LMB
+        select USE_GENERIC_SMP_HELPERS if SMP
+        select RTC_DRV_CMOS
+        select RTC_DRV_BQ4802
+        select RTC_DRV_SUN4V
+        select RTC_DRV_STARFIRE
+
+config ARCH_DEFCONFIG
+        string
+        default "arch/sparc/configs/sparc32_defconfig" if SPARC32
+        default "arch/sparc/configs/sparc64_defconfig" if SPARC64
+
+# CONFIG_BITS can be used at source level to get 32/64 bits
+config BITS
+        int
+        default 32 if SPARC32
+        default 64 if SPARC64
+
+config 64BIT
+        def_bool y if SPARC64
+
+config GENERIC_TIME
+        bool
+        default y if SPARC64
+
+config GENERIC_CMOS_UPDATE
+        bool
+        default y if SPARC64
+
+config GENERIC_CLOCKEVENTS
+        bool
+        default y if SPARC64
+
+config IOMMU_HELPER
+        bool
+        default y if SPARC64
+
+config QUICKLIST
+        bool
+        default y if SPARC64
+
+config STACKTRACE_SUPPORT
+        bool
+        default y if SPARC64
+
+config LOCKDEP_SUPPORT
+        bool
+        default y if SPARC64
+
+config HAVE_LATENCYTOP_SUPPORT
+        bool
+        default y if SPARC64
+
+config AUDIT_ARCH
+        bool
+        default y
+
+config HAVE_SETUP_PER_CPU_AREA
+        def_bool y if SPARC64
+
+config GENERIC_HARDIRQS_NO__DO_IRQ
+        bool
+        def_bool y if SPARC64
+
 config MMU
         bool
         default y
 
 config HIGHMEM
         bool
-        default y
+        default y if SPARC32
 
 config ZONE_DMA
         bool
-        default y
+        default y if SPARC32
 
 config GENERIC_ISA_DMA
         bool
-        default y
+        default y if SPARC32
 
 config GENERIC_GPIO
         bool
@@ -31,15 +126,11 @@ config ARCH_NO_VIRT_TO_BUS
 config OF
         def_bool y
 
-config HZ
-        int
-        default 100
-
 source "init/Kconfig"
 
 source "kernel/Kconfig.freezer"
 
-menu "General machine setup"
+menu "Processor type and features"
 
 config SMP
         bool "Symmetric multi-processing support (does not work on sun4/sun4c)"
@@ -64,82 +155,269 @@ config SMP
           If you don't know what to do here, say N.
 
 config NR_CPUS
-        int "Maximum number of CPUs (2-32)"
-        range 2 32
+        int "Maximum number of CPUs"
         depends on SMP
-        default "32"
+        range 2 32 if SPARC32
+        range 2 1024 if SPARC64
+        default 32 if SPARC32
+        default 64 if SPARC64
 
-config SPARC
+source kernel/Kconfig.hz
+
+config RWSEM_GENERIC_SPINLOCK
+        bool
+        default y if SPARC32
+
+config RWSEM_XCHGADD_ALGORITHM
+        bool
+        default y if SPARC64
+
+config GENERIC_FIND_NEXT_BIT
         bool
         default y
-        select HAVE_IDE
-        select HAVE_OPROFILE
-        select HAVE_ARCH_KGDB if !SMP
-        select HAVE_ARCH_TRACEHOOK
-        select ARCH_WANT_OPTIONAL_GPIOLIB
-        select RTC_CLASS
-        select RTC_DRV_M48T59
 
-# Identify this as a Sparc32 build
-config SPARC32
+config GENERIC_HWEIGHT
+        bool
+        default y if !ULTRA_HAS_POPULATION_COUNT
+
+config GENERIC_CALIBRATE_DELAY
         bool
         default y
-        help
-          SPARC is a family of RISC microprocessors designed and marketed by
-          Sun Microsystems, incorporated.  They are very widely found in Sun
-          workstations and clones. This port covers the original 32-bit SPARC;
-          it is old and stable and usually considered one of the "big three"
-          along with the Intel and Alpha ports.  The UltraLinux project
-          maintains both the SPARC32 and SPARC64 ports; its web page is
-          available at <http://www.ultralinux.org/>.
 
-# Global things across all Sun machines.
-config ISA
+config ARCH_MAY_HAVE_PC_FDC
         bool
-        help
-          ISA is found on Espresso only and is not supported currently.
-          Say N
+        default y
 
-config EISA
+config ARCH_HAS_ILOG2_U32
         bool
+        default n
+
+config ARCH_HAS_ILOG2_U64
+        bool
+        default n
+
+config EMULATED_CMPXCHG
+        bool
+        default y if SPARC32
         help
-          EISA is not supported.
-          Say N
+          Sparc32 does not have a CAS instruction like sparc64. cmpxchg()
+          is emulated, and therefore it is not completely atomic.
 
-config MCA
+# Makefile helpers
+config SPARC32_SMP
+        bool
+        default y
+        depends on SPARC32 && SMP
+
+config SPARC64_SMP
         bool
+        default y
+        depends on SPARC64 && SMP
+
+choice
+        prompt "Kernel page size" if SPARC64
+        default SPARC64_PAGE_SIZE_8KB
+
+config SPARC64_PAGE_SIZE_8KB
+        bool "8KB"
         help
-          MCA is not supported.
-          Say N
+          This lets you select the page size of the kernel.
 
-config PCMCIA
-        tristate
-        ---help---
-          Say Y here if you want to attach PCMCIA- or PC-cards to your Linux
-          computer.  These are credit-card size devices such as network cards,
-          modems or hard drives often used with laptops computers.  There are
-          actually two varieties of these cards: the older 16 bit PCMCIA cards
-          and the newer 32 bit CardBus cards.  If you want to use CardBus
-          cards, you need to say Y here and also to "CardBus support" below.
+          8KB and 64KB work quite well, since SPARC ELF sections
+          provide for up to 64KB alignment.
 
-          To use your PC-cards, you will need supporting software from David
-          Hinds' pcmcia-cs package (see the file <file:Documentation/Changes>
-          for location).  Please also read the PCMCIA-HOWTO, available from
-          <http://www.tldp.org/docs.html#howto>.
+          If you don't know what to do, choose 8KB.
 
-          To compile this driver as modules, choose M here: the
-          modules will be called pcmcia_core and ds.
+config SPARC64_PAGE_SIZE_64KB
+        bool "64KB"
 
-config SBUS
+endchoice
+
+config SECCOMP
+        bool "Enable seccomp to safely compute untrusted bytecode"
+        depends on SPARC64 && PROC_FS
+        default y
+        help
+          This kernel feature is useful for number crunching applications
+          that may need to compute untrusted bytecode during their
+          execution. By using pipes or other transports made available to
+          the process as file descriptors supporting the read/write
+          syscalls, it's possible to isolate those applications in
+          their own address space using seccomp. Once seccomp is
+          enabled via /proc/<pid>/seccomp, it cannot be disabled
+          and the task is only allowed to execute a few safe syscalls
+          defined by each seccomp mode.
+
+          If unsure, say Y. Only embedded should say N here.
+
+config HOTPLUG_CPU
+        bool "Support for hot-pluggable CPUs"
+        depends on SPARC64 && SMP
+        select HOTPLUG
+        help
+          Say Y here to experiment with turning CPUs off and on.  CPUs
+          can be controlled through /sys/devices/system/cpu/cpu#.
+          Say N if you want to disable CPU hotplug.
+
+config GENERIC_HARDIRQS
         bool
+        default y if SPARC64
+
+source "kernel/time/Kconfig"
+
+if SPARC64
+source "drivers/cpufreq/Kconfig"
+
+config US3_FREQ
+        tristate "UltraSPARC-III CPU Frequency driver"
+        depends on CPU_FREQ
+        select CPU_FREQ_TABLE
+        help
+          This adds the CPUFreq driver for UltraSPARC-III processors.
+
+          For details, take a look at <file:Documentation/cpu-freq>.
+
+          If in doubt, say N.
+
+config US2E_FREQ
+        tristate "UltraSPARC-IIe CPU Frequency driver"
+        depends on CPU_FREQ
+        select CPU_FREQ_TABLE
+        help
+          This adds the CPUFreq driver for UltraSPARC-IIe processors.
+
+          For details, take a look at <file:Documentation/cpu-freq>.
+
+          If in doubt, say N.
+
+endif
+
+config US3_MC
+        tristate "UltraSPARC-III Memory Controller driver"
+        depends on SPARC64
         default y
+        help
+          This adds a driver for the UltraSPARC-III memory controller.
+          Loading this driver allows exact mnemonic strings to be
+          printed in the event of a memory error, so that the faulty DIMM
+          on the motherboard can be matched to the error.
 
-config SBUSCHAR
+          If in doubt, say Y, as this information can be very useful.
+
+# Global things across all Sun machines.
+config GENERIC_LOCKBREAK
         bool
         default y
+        depends on SPARC64 && SMP && PREEMPT
+
+choice
+        prompt "SPARC64 Huge TLB Page Size"
+        depends on SPARC64 && HUGETLB_PAGE
+        default HUGETLB_PAGE_SIZE_4MB
+
+config HUGETLB_PAGE_SIZE_4MB
+        bool "4MB"
+
+config HUGETLB_PAGE_SIZE_512K
+        bool "512K"
+
+config HUGETLB_PAGE_SIZE_64K
+        depends on !SPARC64_PAGE_SIZE_64KB
+        bool "64K"
+
+endchoice
+
+config NUMA
+        bool "NUMA support"
+        depends on SPARC64 && SMP
+
+config NODES_SHIFT
+        int
+        default "4"
+        depends on NEED_MULTIPLE_NODES
+
+# Some NUMA nodes have memory ranges that span
+# other nodes.  Even though a pfn is valid and
+# between a node's start and end pfns, it may not
+# reside on that node.  See memmap_init_zone()
+# for details.
+config NODES_SPAN_OTHER_NODES
+        def_bool y
+        depends on NEED_MULTIPLE_NODES
+
+config ARCH_POPULATES_NODE_MAP
+        def_bool y if SPARC64
+
+config ARCH_SELECT_MEMORY_MODEL
+        def_bool y if SPARC64
+
+config ARCH_SPARSEMEM_ENABLE
+        def_bool y if SPARC64
+        select SPARSEMEM_VMEMMAP_ENABLE
+
+config ARCH_SPARSEMEM_DEFAULT
+        def_bool y if SPARC64
+
+source "mm/Kconfig"
+
+config SCHED_SMT
+        bool "SMT (Hyperthreading) scheduler support"
+        depends on SPARC64 && SMP
+        default y
+        help
+          SMT scheduler support improves the CPU scheduler's decision making
+          when dealing with SPARC cpus at a cost of slightly increased overhead
+          in some places. If unsure say N here.
+
+config SCHED_MC
+        bool "Multi-core scheduler support"
+        depends on SPARC64 && SMP
+        default y
+        help
+          Multi-core scheduler support improves the CPU scheduler's decision
+          making when dealing with multi-core CPU chips at a cost of slightly
+          increased overhead in some places. If unsure say N here.
+
+if SPARC64
+source "kernel/Kconfig.preempt"
+endif
+
+config CMDLINE_BOOL
+        bool "Default bootloader kernel arguments"
+        depends on SPARC64
+
+config CMDLINE
+        string "Initial kernel command string"
+        depends on CMDLINE_BOOL
+        default "console=ttyS0,9600 root=/dev/sda1"
+        help
+          Say Y here if you want to be able to pass default arguments to
+          the kernel. This will be overridden by the bootloader, if you
+          use one (such as SILO). This is most useful if you want to boot
+          a kernel from TFTP, and want default options to be available
+          with having them passed on the command line.
+
+          NOTE: This option WILL override the PROM bootargs setting!
+
+config SUN_PM
+        bool
+        default y if SPARC32
+        help
+          Enable power management and CPU standby features on supported
+          SPARC platforms.
+
+config SPARC_LED
+        tristate "Sun4m LED driver"
+        depends on SPARC32
+        help
+          This driver toggles the front-panel LED on sun4m systems
+          in a user-specifiable manner.  Its state can be probed
+          by reading /proc/led and its blinking mode can be changed
+          via writes to /proc/led
 
 config SERIAL_CONSOLE
         bool
+        depends on SPARC32
         default y
         ---help---
           If you say Y here, it will be possible to use a serial port as the
@@ -161,71 +439,66 @@ config SERIAL_CONSOLE
 
           If unsure, say N.
 
-config SUN_AUXIO
-        bool
-        default y
-
-config SUN_IO
-        bool
-        default y
-
-config RWSEM_GENERIC_SPINLOCK
-        bool
-        default y
+endmenu
 
-config RWSEM_XCHGADD_ALGORITHM
+menu "Bus options (PCI etc.)"
+config ISA
         bool
+        help
+          ISA is found on Espresso only and is not supported currently.
 
-config GENERIC_FIND_NEXT_BIT
+config ISAPNP
         bool
-        default y
+        help
+          ISAPNP is not supported
 
-config GENERIC_HWEIGHT
+config EISA
         bool
-        default y
+        help
+          EISA is not supported.
 
-config GENERIC_CALIBRATE_DELAY
+config MCA
         bool
-        default y
+        help
+          MCA is not supported.
 
-config ARCH_MAY_HAVE_PC_FDC
+config SBUS
         bool
         default y
 
-config ARCH_HAS_ILOG2_U32
-        bool
-        default n
-
-config ARCH_HAS_ILOG2_U64
-        bool
-        default n
-
-config EMULATED_CMPXCHG
+config SBUSCHAR
         bool
         default y
-        help
-          Sparc32 does not have a CAS instruction like sparc64. cmpxchg()
-          is emulated, and therefore it is not completely atomic.
 
-config SUN_PM
-        bool
-        default y
+config SUN_LDOMS
+        bool "Sun Logical Domains support"
+        depends on SPARC64
         help
-          Enable power management and CPU standby features on supported
-          SPARC platforms.
+          Say Y here is you want to support virtual devices via
+          Logical Domains.
 
 config PCI
         bool "Support for PCI and PS/2 keyboard/mouse"
         help
+          Find out whether your system includes a PCI bus. PCI is the name of
+          a bus system, i.e. the way the CPU talks to the other stuff inside
+          your box.  If you say Y here, the kernel will include drivers and
+          infrastructure code to support PCI bus devices.
+
           CONFIG_PCI is needed for all JavaStation's (including MrCoffee),
           CP-1200, JavaEngine-1, Corona, Red October, and Serengeti SGSC.
           All of these platforms are extremely obscure, so say N if unsure.
 
+config PCI_DOMAINS
+        def_bool PCI if SPARC64
+
 config PCI_SYSCALL
         def_bool PCI
 
 source "drivers/pci/Kconfig"
 
+source "drivers/pcmcia/Kconfig"
+
 config SUN_OPENPROMFS
         tristate "Openprom tree appears in /proc/openprom"
         help
@@ -239,17 +512,33 @@ config SUN_OPENPROMFS
           Only choose N if you know in advance that you will not need to modify
           OpenPROM settings on the running system.
 
-config SPARC_LED
-        tristate "Sun4m LED driver"
-        help
-          This driver toggles the front-panel LED on sun4m systems
-          in a user-specifiable manner.  Its state can be probed
-          by reading /proc/led and its blinking mode can be changed
-          via writes to /proc/led
+# Makefile helpers
+config SPARC32_PCI
+        bool
+        default y
+        depends on SPARC32 && PCI
+
+config SPARC64_PCI
+        bool
+        default y
+        depends on SPARC64 && PCI
+
+endmenu
+
+menu "Executable file formats"
 
 source "fs/Kconfig.binfmt"
 
-source "mm/Kconfig"
+config COMPAT
+        bool
+        depends on SPARC64
+        default y
+        select COMPAT_BINFMT_ELF
+
+config SYSVIPC_COMPAT
+        bool
+        depends on COMPAT && SYSVIPC
+        default y
 
 endmenu
 
@@ -259,40 +548,6 @@ source "drivers/Kconfig"
 
 source "drivers/sbus/char/Kconfig"
 
-# This one must be before the filesystem configs. -DaveM
-
-menu "Unix98 PTY support"
-
-config UNIX98_PTYS
-        bool "Unix98 PTY support"
-        ---help---
-          A pseudo terminal (PTY) is a software device consisting of two
-          halves: a master and a slave. The slave device behaves identical to
-          a physical terminal; the master device is used by a process to
-          read data from and write data to the slave, thereby emulating a
-          terminal. Typical programs for the master side are telnet servers
-          and xterms.
-
-          Linux has traditionally used the BSD-like names /dev/ptyxx for
-          masters and /dev/ttyxx for slaves of pseudo terminals. This scheme
-          has a number of problems. The GNU C library glibc 2.1 and later,
-          however, supports the Unix98 naming standard: in order to acquire a
-          pseudo terminal, a process opens /dev/ptmx; the number of the pseudo
-          terminal is then made available to the process and the pseudo
-          terminal slave can be accessed as /dev/pts/<number>. What was
-          traditionally /dev/ttyp2 will then be /dev/pts/2, for example.
-
-          The entries in /dev/pts/ are created on the fly by a virtual
-          file system; therefore, if you say Y here you should say Y to
-          "/dev/pts file system for Unix98 PTYs" as well.
-
-          If you want to say Y here, you need to have the C library glibc 2.1
-          or later (equal to libc-6.1, check with "ls -l /lib/libc.so.*").
-          Read the instructions in <file:Documentation/Changes> pertaining to
-          pseudo terminals. It's safe to say N.
-
-endmenu
-
 source "fs/Kconfig"
 
 source "arch/sparc/Kconfig.debug"