diff options
Diffstat (limited to 'arch/sh')
-rw-r--r-- | arch/sh/cchips/Kconfig | 33 | ||||
-rw-r--r-- | arch/sh/cchips/hd6446x/Makefile | 1 | ||||
-rw-r--r-- | arch/sh/cchips/hd6446x/hd64465/Makefile | 6 | ||||
-rw-r--r-- | arch/sh/cchips/hd6446x/hd64465/gpio.c | 196 | ||||
-rw-r--r-- | arch/sh/cchips/hd6446x/hd64465/io.c | 211 | ||||
-rw-r--r-- | arch/sh/cchips/hd6446x/hd64465/setup.c | 181 | ||||
-rw-r--r-- | arch/sh/include/asm/hd64465/gpio.h | 46 | ||||
-rw-r--r-- | arch/sh/include/asm/hd64465/hd64465.h | 256 | ||||
-rw-r--r-- | arch/sh/include/asm/hd64465/io.h | 44 | ||||
-rw-r--r-- | arch/sh/include/asm/serial.h | 17 | ||||
-rw-r--r-- | arch/sh/tools/mach-types | 1 |
11 files changed, 0 insertions, 992 deletions
diff --git a/arch/sh/cchips/Kconfig b/arch/sh/cchips/Kconfig index 7892361eedc8..f43d18373f22 100644 --- a/arch/sh/cchips/Kconfig +++ b/arch/sh/cchips/Kconfig | |||
@@ -22,20 +22,6 @@ config HD64461 | |||
22 | Say Y if you want support for the HD64461. | 22 | Say Y if you want support for the HD64461. |
23 | Otherwise, say N. | 23 | Otherwise, say N. |
24 | 24 | ||
25 | config HD64465 | ||
26 | bool "Hitachi HD64465 companion chip support" | ||
27 | ---help--- | ||
28 | The Hitachi HD64465 provides an interface for | ||
29 | the SH7750 CPU, supporting a LCD controller, | ||
30 | CRT color controller, IrDA, USB, PCMCIA, | ||
31 | keyboard controller, and a printer interface. | ||
32 | |||
33 | More information is available at | ||
34 | <http://global.hitachi.com/New/cnews/E/1998/981019B.html>. | ||
35 | |||
36 | Say Y if you want support for the HD64465. | ||
37 | Otherwise, say N. | ||
38 | |||
39 | endchoice | 25 | endchoice |
40 | 26 | ||
41 | # These will also be split into the Kconfig's below | 27 | # These will also be split into the Kconfig's below |
@@ -61,23 +47,4 @@ config HD64461_ENABLER | |||
61 | via the HD64461 companion chip. | 47 | via the HD64461 companion chip. |
62 | Otherwise, say N. | 48 | Otherwise, say N. |
63 | 49 | ||
64 | config HD64465_IOBASE | ||
65 | hex "HD64465 start address" | ||
66 | depends on HD64465 | ||
67 | default "0xb0000000" | ||
68 | help | ||
69 | The default setting of the HD64465 IO base address is 0xb0000000. | ||
70 | |||
71 | Do not change this unless you know what you are doing. | ||
72 | |||
73 | config HD64465_IRQ | ||
74 | int "HD64465 IRQ" | ||
75 | depends on HD64465 | ||
76 | default "5" | ||
77 | help | ||
78 | The default setting of the HD64465 IRQ is 5. | ||
79 | |||
80 | Do not change this unless you know what you are doing. | ||
81 | |||
82 | endmenu | 50 | endmenu |
83 | |||
diff --git a/arch/sh/cchips/hd6446x/Makefile b/arch/sh/cchips/hd6446x/Makefile index f7de4076e242..9682e3ab668f 100644 --- a/arch/sh/cchips/hd6446x/Makefile +++ b/arch/sh/cchips/hd6446x/Makefile | |||
@@ -1,4 +1,3 @@ | |||
1 | obj-$(CONFIG_HD64461) += hd64461.o | 1 | obj-$(CONFIG_HD64461) += hd64461.o |
2 | obj-$(CONFIG_HD64465) += hd64465/ | ||
3 | 2 | ||
4 | EXTRA_CFLAGS += -Werror | 3 | EXTRA_CFLAGS += -Werror |
diff --git a/arch/sh/cchips/hd6446x/hd64465/Makefile b/arch/sh/cchips/hd6446x/hd64465/Makefile deleted file mode 100644 index f66edcb52c5b..000000000000 --- a/arch/sh/cchips/hd6446x/hd64465/Makefile +++ /dev/null | |||
@@ -1,6 +0,0 @@ | |||
1 | # | ||
2 | # Makefile for the HD64465 | ||
3 | # | ||
4 | |||
5 | obj-y := setup.o io.o gpio.o | ||
6 | |||
diff --git a/arch/sh/cchips/hd6446x/hd64465/gpio.c b/arch/sh/cchips/hd6446x/hd64465/gpio.c deleted file mode 100644 index 43431855ec86..000000000000 --- a/arch/sh/cchips/hd6446x/hd64465/gpio.c +++ /dev/null | |||
@@ -1,196 +0,0 @@ | |||
1 | /* | ||
2 | * $Id: gpio.c,v 1.4 2003/05/19 22:24:18 lethal Exp $ | ||
3 | * by Greg Banks <gbanks@pocketpenguins.com> | ||
4 | * (c) 2000 PocketPenguins Inc | ||
5 | * | ||
6 | * GPIO pin support for HD64465 companion chip. | ||
7 | */ | ||
8 | |||
9 | #include <linux/kernel.h> | ||
10 | #include <linux/init.h> | ||
11 | #include <linux/module.h> | ||
12 | #include <linux/sched.h> | ||
13 | #include <linux/ioport.h> | ||
14 | #include <asm/io.h> | ||
15 | #include <asm/hd64465/gpio.h> | ||
16 | |||
17 | #define _PORTOF(portpin) (((portpin)>>3)&0x7) | ||
18 | #define _PINOF(portpin) ((portpin)&0x7) | ||
19 | |||
20 | /* Register addresses parametrised on port */ | ||
21 | #define GPIO_CR(port) (HD64465_REG_GPACR+((port)<<1)) | ||
22 | #define GPIO_DR(port) (HD64465_REG_GPADR+((port)<<1)) | ||
23 | #define GPIO_ICR(port) (HD64465_REG_GPAICR+((port)<<1)) | ||
24 | #define GPIO_ISR(port) (HD64465_REG_GPAISR+((port)<<1)) | ||
25 | |||
26 | #define GPIO_NPORTS 5 | ||
27 | |||
28 | #define MODNAME "hd64465_gpio" | ||
29 | |||
30 | EXPORT_SYMBOL(hd64465_gpio_configure); | ||
31 | EXPORT_SYMBOL(hd64465_gpio_get_pin); | ||
32 | EXPORT_SYMBOL(hd64465_gpio_get_port); | ||
33 | EXPORT_SYMBOL(hd64465_gpio_register_irq); | ||
34 | EXPORT_SYMBOL(hd64465_gpio_set_pin); | ||
35 | EXPORT_SYMBOL(hd64465_gpio_set_port); | ||
36 | EXPORT_SYMBOL(hd64465_gpio_unregister_irq); | ||
37 | |||
38 | /* TODO: each port should be protected with a spinlock */ | ||
39 | |||
40 | |||
41 | void hd64465_gpio_configure(int portpin, int direction) | ||
42 | { | ||
43 | unsigned short cr; | ||
44 | unsigned int shift = (_PINOF(portpin)<<1); | ||
45 | |||
46 | cr = inw(GPIO_CR(_PORTOF(portpin))); | ||
47 | cr &= ~(3<<shift); | ||
48 | cr |= direction<<shift; | ||
49 | outw(cr, GPIO_CR(_PORTOF(portpin))); | ||
50 | } | ||
51 | |||
52 | void hd64465_gpio_set_pin(int portpin, unsigned int value) | ||
53 | { | ||
54 | unsigned short d; | ||
55 | unsigned short mask = 1<<(_PINOF(portpin)); | ||
56 | |||
57 | d = inw(GPIO_DR(_PORTOF(portpin))); | ||
58 | if (value) | ||
59 | d |= mask; | ||
60 | else | ||
61 | d &= ~mask; | ||
62 | outw(d, GPIO_DR(_PORTOF(portpin))); | ||
63 | } | ||
64 | |||
65 | unsigned int hd64465_gpio_get_pin(int portpin) | ||
66 | { | ||
67 | return inw(GPIO_DR(_PORTOF(portpin))) & (1<<(_PINOF(portpin))); | ||
68 | } | ||
69 | |||
70 | /* TODO: for cleaner atomicity semantics, add a mask to this routine */ | ||
71 | |||
72 | void hd64465_gpio_set_port(int port, unsigned int value) | ||
73 | { | ||
74 | outw(value, GPIO_DR(port)); | ||
75 | } | ||
76 | |||
77 | unsigned int hd64465_gpio_get_port(int port) | ||
78 | { | ||
79 | return inw(GPIO_DR(port)); | ||
80 | } | ||
81 | |||
82 | |||
83 | static struct { | ||
84 | void (*func)(int portpin, void *dev); | ||
85 | void *dev; | ||
86 | } handlers[GPIO_NPORTS * 8]; | ||
87 | |||
88 | static irqreturn_t hd64465_gpio_interrupt(int irq, void *dev) | ||
89 | { | ||
90 | unsigned short port, pin, isr, mask, portpin; | ||
91 | |||
92 | for (port=0 ; port<GPIO_NPORTS ; port++) { | ||
93 | isr = inw(GPIO_ISR(port)); | ||
94 | |||
95 | for (pin=0 ; pin<8 ; pin++) { | ||
96 | mask = 1<<pin; | ||
97 | if (isr & mask) { | ||
98 | portpin = (port<<3)|pin; | ||
99 | if (handlers[portpin].func != 0) | ||
100 | handlers[portpin].func(portpin, handlers[portpin].dev); | ||
101 | else | ||
102 | printk(KERN_NOTICE "unexpected GPIO interrupt, pin %c%d\n", | ||
103 | port+'A', (int)pin); | ||
104 | } | ||
105 | } | ||
106 | |||
107 | /* Write 1s back to ISR to clear it? That's what the manual says.. */ | ||
108 | outw(isr, GPIO_ISR(port)); | ||
109 | } | ||
110 | |||
111 | return IRQ_HANDLED; | ||
112 | } | ||
113 | |||
114 | void hd64465_gpio_register_irq(int portpin, int mode, | ||
115 | void (*handler)(int portpin, void *dev), void *dev) | ||
116 | { | ||
117 | unsigned long flags; | ||
118 | unsigned short icr, mask; | ||
119 | |||
120 | if (handler == 0) | ||
121 | return; | ||
122 | |||
123 | local_irq_save(flags); | ||
124 | |||
125 | handlers[portpin].func = handler; | ||
126 | handlers[portpin].dev = dev; | ||
127 | |||
128 | /* | ||
129 | * Configure Interrupt Control Register | ||
130 | */ | ||
131 | icr = inw(GPIO_ICR(_PORTOF(portpin))); | ||
132 | mask = (1<<_PINOF(portpin)); | ||
133 | |||
134 | /* unmask interrupt */ | ||
135 | icr &= ~mask; | ||
136 | |||
137 | /* set TS bit */ | ||
138 | mask <<= 8; | ||
139 | icr &= ~mask; | ||
140 | if (mode == HD64465_GPIO_RISING) | ||
141 | icr |= mask; | ||
142 | |||
143 | outw(icr, GPIO_ICR(_PORTOF(portpin))); | ||
144 | |||
145 | local_irq_restore(flags); | ||
146 | } | ||
147 | |||
148 | void hd64465_gpio_unregister_irq(int portpin) | ||
149 | { | ||
150 | unsigned long flags; | ||
151 | unsigned short icr; | ||
152 | |||
153 | local_irq_save(flags); | ||
154 | |||
155 | /* | ||
156 | * Configure Interrupt Control Register | ||
157 | */ | ||
158 | icr = inw(GPIO_ICR(_PORTOF(portpin))); | ||
159 | icr |= (1<<_PINOF(portpin)); /* mask interrupt */ | ||
160 | outw(icr, GPIO_ICR(_PORTOF(portpin))); | ||
161 | |||
162 | handlers[portpin].func = 0; | ||
163 | handlers[portpin].dev = 0; | ||
164 | |||
165 | local_irq_restore(flags); | ||
166 | } | ||
167 | |||
168 | static int __init hd64465_gpio_init(void) | ||
169 | { | ||
170 | if (!request_region(HD64465_REG_GPACR, 0x1000, MODNAME)) | ||
171 | return -EBUSY; | ||
172 | if (request_irq(HD64465_IRQ_GPIO, hd64465_gpio_interrupt, | ||
173 | IRQF_DISABLED, MODNAME, 0)) | ||
174 | goto out_irqfailed; | ||
175 | |||
176 | printk("HD64465 GPIO layer on irq %d\n", HD64465_IRQ_GPIO); | ||
177 | |||
178 | return 0; | ||
179 | |||
180 | out_irqfailed: | ||
181 | release_region(HD64465_REG_GPACR, 0x1000); | ||
182 | |||
183 | return -EINVAL; | ||
184 | } | ||
185 | |||
186 | static void __exit hd64465_gpio_exit(void) | ||
187 | { | ||
188 | release_region(HD64465_REG_GPACR, 0x1000); | ||
189 | free_irq(HD64465_IRQ_GPIO, 0); | ||
190 | } | ||
191 | |||
192 | module_init(hd64465_gpio_init); | ||
193 | module_exit(hd64465_gpio_exit); | ||
194 | |||
195 | MODULE_LICENSE("GPL"); | ||
196 | |||
diff --git a/arch/sh/cchips/hd6446x/hd64465/io.c b/arch/sh/cchips/hd6446x/hd64465/io.c deleted file mode 100644 index 58704d066ae2..000000000000 --- a/arch/sh/cchips/hd6446x/hd64465/io.c +++ /dev/null | |||
@@ -1,211 +0,0 @@ | |||
1 | /* | ||
2 | * $Id: io.c,v 1.4 2003/08/03 03:05:10 lethal Exp $ | ||
3 | * by Greg Banks <gbanks@pocketpenguins.com> | ||
4 | * (c) 2000 PocketPenguins Inc | ||
5 | * | ||
6 | * Derived from io_hd64461.c, which bore the message: | ||
7 | * Copyright (C) 2000 YAEGASHI Takeshi | ||
8 | * | ||
9 | * Typical I/O routines for HD64465 system. | ||
10 | */ | ||
11 | |||
12 | #include <linux/kernel.h> | ||
13 | #include <linux/module.h> | ||
14 | #include <asm/io.h> | ||
15 | #include <asm/hd64465/hd64465.h> | ||
16 | |||
17 | |||
18 | #define HD64465_DEBUG 0 | ||
19 | |||
20 | #if HD64465_DEBUG | ||
21 | #define DPRINTK(args...) printk(args) | ||
22 | #define DIPRINTK(n, args...) if (hd64465_io_debug>(n)) printk(args) | ||
23 | #else | ||
24 | #define DPRINTK(args...) | ||
25 | #define DIPRINTK(n, args...) | ||
26 | #endif | ||
27 | |||
28 | |||
29 | |||
30 | /* This is a hack suitable only for debugging IO port problems */ | ||
31 | int hd64465_io_debug; | ||
32 | EXPORT_SYMBOL(hd64465_io_debug); | ||
33 | |||
34 | /* Low iomap maps port 0-1K to addresses in 8byte chunks */ | ||
35 | #define HD64465_IOMAP_LO_THRESH 0x400 | ||
36 | #define HD64465_IOMAP_LO_SHIFT 3 | ||
37 | #define HD64465_IOMAP_LO_MASK ((1<<HD64465_IOMAP_LO_SHIFT)-1) | ||
38 | #define HD64465_IOMAP_LO_NMAP (HD64465_IOMAP_LO_THRESH>>HD64465_IOMAP_LO_SHIFT) | ||
39 | static unsigned long hd64465_iomap_lo[HD64465_IOMAP_LO_NMAP]; | ||
40 | static unsigned char hd64465_iomap_lo_shift[HD64465_IOMAP_LO_NMAP]; | ||
41 | |||
42 | /* High iomap maps port 1K-64K to addresses in 1K chunks */ | ||
43 | #define HD64465_IOMAP_HI_THRESH 0x10000 | ||
44 | #define HD64465_IOMAP_HI_SHIFT 10 | ||
45 | #define HD64465_IOMAP_HI_MASK ((1<<HD64465_IOMAP_HI_SHIFT)-1) | ||
46 | #define HD64465_IOMAP_HI_NMAP (HD64465_IOMAP_HI_THRESH>>HD64465_IOMAP_HI_SHIFT) | ||
47 | static unsigned long hd64465_iomap_hi[HD64465_IOMAP_HI_NMAP]; | ||
48 | static unsigned char hd64465_iomap_hi_shift[HD64465_IOMAP_HI_NMAP]; | ||
49 | |||
50 | #define PORT2ADDR(x) (sh_mv.mv_isa_port2addr(x)) | ||
51 | |||
52 | void hd64465_port_map(unsigned short baseport, unsigned int nports, | ||
53 | unsigned long addr, unsigned char shift) | ||
54 | { | ||
55 | unsigned int port, endport = baseport + nports; | ||
56 | |||
57 | DPRINTK("hd64465_port_map(base=0x%04hx, n=0x%04hx, addr=0x%08lx,endport=0x%04x)\n", | ||
58 | baseport, nports, addr,endport); | ||
59 | |||
60 | for (port = baseport ; | ||
61 | port < endport && port < HD64465_IOMAP_LO_THRESH ; | ||
62 | port += (1<<HD64465_IOMAP_LO_SHIFT)) { | ||
63 | DPRINTK(" maplo[0x%x] = 0x%08lx\n", port, addr); | ||
64 | hd64465_iomap_lo[port>>HD64465_IOMAP_LO_SHIFT] = addr; | ||
65 | hd64465_iomap_lo_shift[port>>HD64465_IOMAP_LO_SHIFT] = shift; | ||
66 | addr += (1<<(HD64465_IOMAP_LO_SHIFT)); | ||
67 | } | ||
68 | |||
69 | for (port = max_t(unsigned int, baseport, HD64465_IOMAP_LO_THRESH); | ||
70 | port < endport && port < HD64465_IOMAP_HI_THRESH ; | ||
71 | port += (1<<HD64465_IOMAP_HI_SHIFT)) { | ||
72 | DPRINTK(" maphi[0x%x] = 0x%08lx\n", port, addr); | ||
73 | hd64465_iomap_hi[port>>HD64465_IOMAP_HI_SHIFT] = addr; | ||
74 | hd64465_iomap_hi_shift[port>>HD64465_IOMAP_HI_SHIFT] = shift; | ||
75 | addr += (1<<(HD64465_IOMAP_HI_SHIFT)); | ||
76 | } | ||
77 | } | ||
78 | EXPORT_SYMBOL(hd64465_port_map); | ||
79 | |||
80 | void hd64465_port_unmap(unsigned short baseport, unsigned int nports) | ||
81 | { | ||
82 | unsigned int port, endport = baseport + nports; | ||
83 | |||
84 | DPRINTK("hd64465_port_unmap(base=0x%04hx, n=0x%04hx)\n", | ||
85 | baseport, nports); | ||
86 | |||
87 | for (port = baseport ; | ||
88 | port < endport && port < HD64465_IOMAP_LO_THRESH ; | ||
89 | port += (1<<HD64465_IOMAP_LO_SHIFT)) { | ||
90 | hd64465_iomap_lo[port>>HD64465_IOMAP_LO_SHIFT] = 0; | ||
91 | } | ||
92 | |||
93 | for (port = max_t(unsigned int, baseport, HD64465_IOMAP_LO_THRESH); | ||
94 | port < endport && port < HD64465_IOMAP_HI_THRESH ; | ||
95 | port += (1<<HD64465_IOMAP_HI_SHIFT)) { | ||
96 | hd64465_iomap_hi[port>>HD64465_IOMAP_HI_SHIFT] = 0; | ||
97 | } | ||
98 | } | ||
99 | EXPORT_SYMBOL(hd64465_port_unmap); | ||
100 | |||
101 | unsigned long hd64465_isa_port2addr(unsigned long port) | ||
102 | { | ||
103 | unsigned long addr = 0; | ||
104 | unsigned char shift; | ||
105 | |||
106 | /* handle remapping of low IO ports */ | ||
107 | if (port < HD64465_IOMAP_LO_THRESH) { | ||
108 | addr = hd64465_iomap_lo[port >> HD64465_IOMAP_LO_SHIFT]; | ||
109 | shift = hd64465_iomap_lo_shift[port >> HD64465_IOMAP_LO_SHIFT]; | ||
110 | if (addr != 0) | ||
111 | addr += (port & HD64465_IOMAP_LO_MASK) << shift; | ||
112 | else | ||
113 | printk(KERN_NOTICE "io_hd64465: access to un-mapped port %lx\n", port); | ||
114 | } else if (port < HD64465_IOMAP_HI_THRESH) { | ||
115 | addr = hd64465_iomap_hi[port >> HD64465_IOMAP_HI_SHIFT]; | ||
116 | shift = hd64465_iomap_hi_shift[port >> HD64465_IOMAP_HI_SHIFT]; | ||
117 | if (addr != 0) | ||
118 | addr += (port & HD64465_IOMAP_HI_MASK) << shift; | ||
119 | else | ||
120 | printk(KERN_NOTICE "io_hd64465: access to un-mapped port %lx\n", port); | ||
121 | } | ||
122 | |||
123 | /* HD64465 internal devices (0xb0000000) */ | ||
124 | else if (port < 0x20000) | ||
125 | addr = CONFIG_HD64465_IOBASE + port - 0x10000; | ||
126 | |||
127 | /* Whole physical address space (0xa0000000) */ | ||
128 | else | ||
129 | addr = P2SEGADDR(port); | ||
130 | |||
131 | DIPRINTK(2, "PORT2ADDR(0x%08lx) = 0x%08lx\n", port, addr); | ||
132 | |||
133 | return addr; | ||
134 | } | ||
135 | |||
136 | static inline void delay(void) | ||
137 | { | ||
138 | ctrl_inw(0xa0000000); | ||
139 | } | ||
140 | |||
141 | unsigned char hd64465_inb(unsigned long port) | ||
142 | { | ||
143 | unsigned long addr = PORT2ADDR(port); | ||
144 | unsigned long b = (addr == 0 ? 0 : *(volatile unsigned char*)addr); | ||
145 | |||
146 | DIPRINTK(0, "inb(%08lx) = %02x\n", addr, (unsigned)b); | ||
147 | return b; | ||
148 | } | ||
149 | |||
150 | unsigned char hd64465_inb_p(unsigned long port) | ||
151 | { | ||
152 | unsigned long v; | ||
153 | unsigned long addr = PORT2ADDR(port); | ||
154 | |||
155 | v = (addr == 0 ? 0 : *(volatile unsigned char*)addr); | ||
156 | delay(); | ||
157 | DIPRINTK(0, "inb_p(%08lx) = %02x\n", addr, (unsigned)v); | ||
158 | return v; | ||
159 | } | ||
160 | |||
161 | unsigned short hd64465_inw(unsigned long port) | ||
162 | { | ||
163 | unsigned long addr = PORT2ADDR(port); | ||
164 | unsigned long b = (addr == 0 ? 0 : *(volatile unsigned short*)addr); | ||
165 | DIPRINTK(0, "inw(%08lx) = %04lx\n", addr, b); | ||
166 | return b; | ||
167 | } | ||
168 | |||
169 | unsigned int hd64465_inl(unsigned long port) | ||
170 | { | ||
171 | unsigned long addr = PORT2ADDR(port); | ||
172 | unsigned int b = (addr == 0 ? 0 : *(volatile unsigned long*)addr); | ||
173 | DIPRINTK(0, "inl(%08lx) = %08x\n", addr, b); | ||
174 | return b; | ||
175 | } | ||
176 | |||
177 | void hd64465_outb(unsigned char b, unsigned long port) | ||
178 | { | ||
179 | unsigned long addr = PORT2ADDR(port); | ||
180 | |||
181 | DIPRINTK(0, "outb(%02x, %08lx)\n", (unsigned)b, addr); | ||
182 | if (addr != 0) | ||
183 | *(volatile unsigned char*)addr = b; | ||
184 | } | ||
185 | |||
186 | void hd64465_outb_p(unsigned char b, unsigned long port) | ||
187 | { | ||
188 | unsigned long addr = PORT2ADDR(port); | ||
189 | |||
190 | DIPRINTK(0, "outb_p(%02x, %08lx)\n", (unsigned)b, addr); | ||
191 | if (addr != 0) | ||
192 | *(volatile unsigned char*)addr = b; | ||
193 | delay(); | ||
194 | } | ||
195 | |||
196 | void hd64465_outw(unsigned short b, unsigned long port) | ||
197 | { | ||
198 | unsigned long addr = PORT2ADDR(port); | ||
199 | DIPRINTK(0, "outw(%04x, %08lx)\n", (unsigned)b, addr); | ||
200 | if (addr != 0) | ||
201 | *(volatile unsigned short*)addr = b; | ||
202 | } | ||
203 | |||
204 | void hd64465_outl(unsigned int b, unsigned long port) | ||
205 | { | ||
206 | unsigned long addr = PORT2ADDR(port); | ||
207 | DIPRINTK(0, "outl(%08x, %08lx)\n", b, addr); | ||
208 | if (addr != 0) | ||
209 | *(volatile unsigned long*)addr = b; | ||
210 | } | ||
211 | |||
diff --git a/arch/sh/cchips/hd6446x/hd64465/setup.c b/arch/sh/cchips/hd6446x/hd64465/setup.c deleted file mode 100644 index 9b8820c36701..000000000000 --- a/arch/sh/cchips/hd6446x/hd64465/setup.c +++ /dev/null | |||
@@ -1,181 +0,0 @@ | |||
1 | /* | ||
2 | * $Id: setup.c,v 1.4 2003/08/03 03:05:10 lethal Exp $ | ||
3 | * | ||
4 | * Setup and IRQ handling code for the HD64465 companion chip. | ||
5 | * by Greg Banks <gbanks@pocketpenguins.com> | ||
6 | * Copyright (c) 2000 PocketPenguins Inc | ||
7 | * | ||
8 | * Derived from setup_hd64461.c which bore the message: | ||
9 | * Copyright (C) 2000 YAEGASHI Takeshi | ||
10 | */ | ||
11 | |||
12 | #include <linux/sched.h> | ||
13 | #include <linux/module.h> | ||
14 | #include <linux/kernel.h> | ||
15 | #include <linux/param.h> | ||
16 | #include <linux/ioport.h> | ||
17 | #include <linux/interrupt.h> | ||
18 | #include <linux/init.h> | ||
19 | #include <linux/irq.h> | ||
20 | #include <asm/io.h> | ||
21 | #include <asm/irq.h> | ||
22 | #include <asm/hd64465/hd64465.h> | ||
23 | |||
24 | static void disable_hd64465_irq(unsigned int irq) | ||
25 | { | ||
26 | unsigned short nimr; | ||
27 | unsigned short mask = 1 << (irq - HD64465_IRQ_BASE); | ||
28 | |||
29 | pr_debug("disable_hd64465_irq(%d): mask=%x\n", irq, mask); | ||
30 | nimr = inw(HD64465_REG_NIMR); | ||
31 | nimr |= mask; | ||
32 | outw(nimr, HD64465_REG_NIMR); | ||
33 | } | ||
34 | |||
35 | static void enable_hd64465_irq(unsigned int irq) | ||
36 | { | ||
37 | unsigned short nimr; | ||
38 | unsigned short mask = 1 << (irq - HD64465_IRQ_BASE); | ||
39 | |||
40 | pr_debug("enable_hd64465_irq(%d): mask=%x\n", irq, mask); | ||
41 | nimr = inw(HD64465_REG_NIMR); | ||
42 | nimr &= ~mask; | ||
43 | outw(nimr, HD64465_REG_NIMR); | ||
44 | } | ||
45 | |||
46 | static void mask_and_ack_hd64465(unsigned int irq) | ||
47 | { | ||
48 | disable_hd64465_irq(irq); | ||
49 | } | ||
50 | |||
51 | static void end_hd64465_irq(unsigned int irq) | ||
52 | { | ||
53 | if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) | ||
54 | enable_hd64465_irq(irq); | ||
55 | } | ||
56 | |||
57 | static unsigned int startup_hd64465_irq(unsigned int irq) | ||
58 | { | ||
59 | enable_hd64465_irq(irq); | ||
60 | return 0; | ||
61 | } | ||
62 | |||
63 | static void shutdown_hd64465_irq(unsigned int irq) | ||
64 | { | ||
65 | disable_hd64465_irq(irq); | ||
66 | } | ||
67 | |||
68 | static struct hw_interrupt_type hd64465_irq_type = { | ||
69 | .typename = "HD64465-IRQ", | ||
70 | .startup = startup_hd64465_irq, | ||
71 | .shutdown = shutdown_hd64465_irq, | ||
72 | .enable = enable_hd64465_irq, | ||
73 | .disable = disable_hd64465_irq, | ||
74 | .ack = mask_and_ack_hd64465, | ||
75 | .end = end_hd64465_irq, | ||
76 | }; | ||
77 | |||
78 | static irqreturn_t hd64465_interrupt(int irq, void *dev_id) | ||
79 | { | ||
80 | printk(KERN_INFO | ||
81 | "HD64465: spurious interrupt, nirr: 0x%x nimr: 0x%x\n", | ||
82 | inw(HD64465_REG_NIRR), inw(HD64465_REG_NIMR)); | ||
83 | |||
84 | return IRQ_NONE; | ||
85 | } | ||
86 | |||
87 | /* | ||
88 | * Support for a secondary IRQ demux step. This is necessary | ||
89 | * because the HD64465 presents a very thin interface to the | ||
90 | * PCMCIA bus; a lot of features (such as remapping interrupts) | ||
91 | * normally done in hardware by other PCMCIA host bridges is | ||
92 | * instead done in software. | ||
93 | */ | ||
94 | static struct { | ||
95 | int (*func)(int, void *); | ||
96 | void *dev; | ||
97 | } hd64465_demux[HD64465_IRQ_NUM]; | ||
98 | |||
99 | void hd64465_register_irq_demux(int irq, | ||
100 | int (*demux)(int irq, void *dev), void *dev) | ||
101 | { | ||
102 | hd64465_demux[irq - HD64465_IRQ_BASE].func = demux; | ||
103 | hd64465_demux[irq - HD64465_IRQ_BASE].dev = dev; | ||
104 | } | ||
105 | EXPORT_SYMBOL(hd64465_register_irq_demux); | ||
106 | |||
107 | void hd64465_unregister_irq_demux(int irq) | ||
108 | { | ||
109 | hd64465_demux[irq - HD64465_IRQ_BASE].func = 0; | ||
110 | } | ||
111 | EXPORT_SYMBOL(hd64465_unregister_irq_demux); | ||
112 | |||
113 | int hd64465_irq_demux(int irq) | ||
114 | { | ||
115 | if (irq == CONFIG_HD64465_IRQ) { | ||
116 | unsigned short i, bit; | ||
117 | unsigned short nirr = inw(HD64465_REG_NIRR); | ||
118 | unsigned short nimr = inw(HD64465_REG_NIMR); | ||
119 | |||
120 | pr_debug("hd64465_irq_demux, nirr=%04x, nimr=%04x\n", nirr, nimr); | ||
121 | nirr &= ~nimr; | ||
122 | for (bit = 1, i = 0 ; i < HD64465_IRQ_NUM ; bit <<= 1, i++) | ||
123 | if (nirr & bit) | ||
124 | break; | ||
125 | |||
126 | if (i < HD64465_IRQ_NUM) { | ||
127 | irq = HD64465_IRQ_BASE + i; | ||
128 | if (hd64465_demux[i].func != 0) | ||
129 | irq = hd64465_demux[i].func(irq, hd64465_demux[i].dev); | ||
130 | } | ||
131 | } | ||
132 | return irq; | ||
133 | } | ||
134 | |||
135 | static struct irqaction irq0 = { | ||
136 | .handler = hd64465_interrupt, | ||
137 | .flags = IRQF_DISABLED, | ||
138 | .mask = CPU_MASK_NONE, | ||
139 | .name = "HD64465", | ||
140 | }; | ||
141 | |||
142 | static int __init setup_hd64465(void) | ||
143 | { | ||
144 | int i; | ||
145 | unsigned short rev; | ||
146 | unsigned short smscr; | ||
147 | |||
148 | if (!MACH_HD64465) | ||
149 | return 0; | ||
150 | |||
151 | printk(KERN_INFO "HD64465 configured at 0x%x on irq %d(mapped into %d to %d)\n", | ||
152 | CONFIG_HD64465_IOBASE, | ||
153 | CONFIG_HD64465_IRQ, | ||
154 | HD64465_IRQ_BASE, | ||
155 | HD64465_IRQ_BASE+HD64465_IRQ_NUM-1); | ||
156 | |||
157 | if (inw(HD64465_REG_SDID) != HD64465_SDID) { | ||
158 | printk(KERN_ERR "HD64465 device ID not found, check base address\n"); | ||
159 | } | ||
160 | |||
161 | rev = inw(HD64465_REG_SRR); | ||
162 | printk(KERN_INFO "HD64465 hardware revision %d.%d\n", (rev >> 8) & 0xff, rev & 0xff); | ||
163 | |||
164 | outw(0xffff, HD64465_REG_NIMR); /* mask all interrupts */ | ||
165 | |||
166 | for (i = 0; i < HD64465_IRQ_NUM ; i++) { | ||
167 | irq_desc[HD64465_IRQ_BASE + i].chip = &hd64465_irq_type; | ||
168 | } | ||
169 | |||
170 | setup_irq(CONFIG_HD64465_IRQ, &irq0); | ||
171 | |||
172 | /* wake up the UART from STANDBY at this point */ | ||
173 | smscr = inw(HD64465_REG_SMSCR); | ||
174 | outw(smscr & (~HD64465_SMSCR_UARTST), HD64465_REG_SMSCR); | ||
175 | |||
176 | /* remap IO ports for first ISA serial port to HD64465 UART */ | ||
177 | hd64465_port_map(0x3f8, 8, CONFIG_HD64465_IOBASE + 0x8000, 1); | ||
178 | |||
179 | return 0; | ||
180 | } | ||
181 | module_init(setup_hd64465); | ||
diff --git a/arch/sh/include/asm/hd64465/gpio.h b/arch/sh/include/asm/hd64465/gpio.h deleted file mode 100644 index a3cdca2713dd..000000000000 --- a/arch/sh/include/asm/hd64465/gpio.h +++ /dev/null | |||
@@ -1,46 +0,0 @@ | |||
1 | #ifndef _ASM_SH_HD64465_GPIO_ | ||
2 | #define _ASM_SH_HD64465_GPIO_ 1 | ||
3 | /* | ||
4 | * $Id: gpio.h,v 1.3 2003/05/04 19:30:14 lethal Exp $ | ||
5 | * | ||
6 | * Hitachi HD64465 companion chip: General Purpose IO pins support. | ||
7 | * This layer enables other device drivers to configure GPIO | ||
8 | * pins, get and set their values, and register an interrupt | ||
9 | * routine for when input pins change in hardware. | ||
10 | * | ||
11 | * by Greg Banks <gbanks@pocketpenguins.com> | ||
12 | * (c) 2000 PocketPenguins Inc. | ||
13 | */ | ||
14 | #include <asm/hd64465.h> | ||
15 | |||
16 | /* Macro to construct a portpin number (used in all | ||
17 | * subsequent functions) from a port letter and a pin | ||
18 | * number, e.g. HD64465_GPIO_PORTPIN('A', 5). | ||
19 | */ | ||
20 | #define HD64465_GPIO_PORTPIN(port,pin) (((port)-'A')<<3|(pin)) | ||
21 | |||
22 | /* Pin configuration constants for _configure() */ | ||
23 | #define HD64465_GPIO_FUNCTION2 0 /* use the pin's *other* function */ | ||
24 | #define HD64465_GPIO_OUT 1 /* output */ | ||
25 | #define HD64465_GPIO_IN_PULLUP 2 /* input, pull-up MOS on */ | ||
26 | #define HD64465_GPIO_IN 3 /* input */ | ||
27 | |||
28 | /* Configure a pin's direction */ | ||
29 | extern void hd64465_gpio_configure(int portpin, int direction); | ||
30 | |||
31 | /* Get, set value */ | ||
32 | extern void hd64465_gpio_set_pin(int portpin, unsigned int value); | ||
33 | extern unsigned int hd64465_gpio_get_pin(int portpin); | ||
34 | extern void hd64465_gpio_set_port(int port, unsigned int value); | ||
35 | extern unsigned int hd64465_gpio_get_port(int port); | ||
36 | |||
37 | /* mode constants for _register_irq() */ | ||
38 | #define HD64465_GPIO_FALLING 0 | ||
39 | #define HD64465_GPIO_RISING 1 | ||
40 | |||
41 | /* Interrupt on external value change */ | ||
42 | extern void hd64465_gpio_register_irq(int portpin, int mode, | ||
43 | void (*handler)(int portpin, void *dev), void *dev); | ||
44 | extern void hd64465_gpio_unregister_irq(int portpin); | ||
45 | |||
46 | #endif /* _ASM_SH_HD64465_GPIO_ */ | ||
diff --git a/arch/sh/include/asm/hd64465/hd64465.h b/arch/sh/include/asm/hd64465/hd64465.h deleted file mode 100644 index cfd0e803d2a2..000000000000 --- a/arch/sh/include/asm/hd64465/hd64465.h +++ /dev/null | |||
@@ -1,256 +0,0 @@ | |||
1 | #ifndef _ASM_SH_HD64465_ | ||
2 | #define _ASM_SH_HD64465_ 1 | ||
3 | /* | ||
4 | * $Id: hd64465.h,v 1.3 2003/05/04 19:30:15 lethal Exp $ | ||
5 | * | ||
6 | * Hitachi HD64465 companion chip support | ||
7 | * | ||
8 | * by Greg Banks <gbanks@pocketpenguins.com> | ||
9 | * (c) 2000 PocketPenguins Inc. | ||
10 | * | ||
11 | * Derived from <asm/hd64461.h> which bore the message: | ||
12 | * Copyright (C) 2000 YAEGASHI Takeshi | ||
13 | */ | ||
14 | #include <asm/io.h> | ||
15 | #include <asm/irq.h> | ||
16 | |||
17 | /* | ||
18 | * Note that registers are defined here as virtual port numbers, | ||
19 | * which have no meaning except to get translated by hd64465_isa_port2addr() | ||
20 | * to an address in the range 0xb0000000-0xb3ffffff. Note that | ||
21 | * this translation happens to consist of adding the lower 16 bits | ||
22 | * of the virtual port number to 0xb0000000. Note also that the manual | ||
23 | * shows addresses as absolute physical addresses starting at 0x10000000, | ||
24 | * so e.g. the NIRR register is listed as 0x15000 here, 0x10005000 in the | ||
25 | * manual, and accessed using address 0xb0005000 - Greg. | ||
26 | */ | ||
27 | |||
28 | /* System registers */ | ||
29 | #define HD64465_REG_SRR 0x1000c /* System Revision Register */ | ||
30 | #define HD64465_REG_SDID 0x10010 /* System Device ID Reg */ | ||
31 | #define HD64465_SDID 0x8122 /* 64465 device ID */ | ||
32 | |||
33 | /* Power Management registers */ | ||
34 | #define HD64465_REG_SMSCR 0x10000 /* System Module Standby Control Reg */ | ||
35 | #define HD64465_SMSCR_PS2ST 0x4000 /* PS/2 Standby */ | ||
36 | #define HD64465_SMSCR_ADCST 0x1000 /* ADC Standby */ | ||
37 | #define HD64465_SMSCR_UARTST 0x0800 /* UART Standby */ | ||
38 | #define HD64465_SMSCR_SCDIST 0x0200 /* Serial Codec Standby */ | ||
39 | #define HD64465_SMSCR_PPST 0x0100 /* Parallel Port Standby */ | ||
40 | #define HD64465_SMSCR_PC0ST 0x0040 /* PCMCIA0 Standby */ | ||
41 | #define HD64465_SMSCR_PC1ST 0x0020 /* PCMCIA1 Standby */ | ||
42 | #define HD64465_SMSCR_AFEST 0x0010 /* AFE Standby */ | ||
43 | #define HD64465_SMSCR_TM0ST 0x0008 /* Timer0 Standby */ | ||
44 | #define HD64465_SMSCR_TM1ST 0x0004 /* Timer1 Standby */ | ||
45 | #define HD64465_SMSCR_IRDAST 0x0002 /* IRDA Standby */ | ||
46 | #define HD64465_SMSCR_KBCST 0x0001 /* Keyboard Controller Standby */ | ||
47 | |||
48 | /* Interrupt Controller registers */ | ||
49 | #define HD64465_REG_NIRR 0x15000 /* Interrupt Request Register */ | ||
50 | #define HD64465_REG_NIMR 0x15002 /* Interrupt Mask Register */ | ||
51 | #define HD64465_REG_NITR 0x15004 /* Interrupt Trigger Mode Register */ | ||
52 | |||
53 | /* Timer registers */ | ||
54 | #define HD64465_REG_TCVR1 0x16000 /* Timer 1 constant value register */ | ||
55 | #define HD64465_REG_TCVR0 0x16002 /* Timer 0 constant value register */ | ||
56 | #define HD64465_REG_TRVR1 0x16004 /* Timer 1 read value register */ | ||
57 | #define HD64465_REG_TRVR0 0x16006 /* Timer 0 read value register */ | ||
58 | #define HD64465_REG_TCR1 0x16008 /* Timer 1 control register */ | ||
59 | #define HD64465_REG_TCR0 0x1600A /* Timer 0 control register */ | ||
60 | #define HD64465_TCR_EADT 0x10 /* Enable ADTRIG# signal */ | ||
61 | #define HD64465_TCR_ETMO 0x08 /* Enable TMO signal */ | ||
62 | #define HD64465_TCR_PST_MASK 0x06 /* Clock Prescale */ | ||
63 | #define HD64465_TCR_PST_1 0x06 /* 1:1 */ | ||
64 | #define HD64465_TCR_PST_4 0x04 /* 1:4 */ | ||
65 | #define HD64465_TCR_PST_8 0x02 /* 1:8 */ | ||
66 | #define HD64465_TCR_PST_16 0x00 /* 1:16 */ | ||
67 | #define HD64465_TCR_TSTP 0x01 /* Start/Stop timer */ | ||
68 | #define HD64465_REG_TIRR 0x1600C /* Timer interrupt request register */ | ||
69 | #define HD64465_REG_TIDR 0x1600E /* Timer interrupt disable register */ | ||
70 | #define HD64465_REG_PWM1CS 0x16010 /* PWM 1 clock scale register */ | ||
71 | #define HD64465_REG_PWM1LPC 0x16012 /* PWM 1 low pulse width counter register */ | ||
72 | #define HD64465_REG_PWM1HPC 0x16014 /* PWM 1 high pulse width counter register */ | ||
73 | #define HD64465_REG_PWM0CS 0x16018 /* PWM 0 clock scale register */ | ||
74 | #define HD64465_REG_PWM0LPC 0x1601A /* PWM 0 low pulse width counter register */ | ||
75 | #define HD64465_REG_PWM0HPC 0x1601C /* PWM 0 high pulse width counter register */ | ||
76 | |||
77 | /* Analog/Digital Converter registers */ | ||
78 | #define HD64465_REG_ADDRA 0x1E000 /* A/D data register A */ | ||
79 | #define HD64465_REG_ADDRB 0x1E002 /* A/D data register B */ | ||
80 | #define HD64465_REG_ADDRC 0x1E004 /* A/D data register C */ | ||
81 | #define HD64465_REG_ADDRD 0x1E006 /* A/D data register D */ | ||
82 | #define HD64465_REG_ADCSR 0x1E008 /* A/D control/status register */ | ||
83 | #define HD64465_ADCSR_ADF 0x80 /* A/D End Flag */ | ||
84 | #define HD64465_ADCSR_ADST 0x40 /* A/D Start Flag */ | ||
85 | #define HD64465_ADCSR_ADIS 0x20 /* A/D Interrupt Status */ | ||
86 | #define HD64465_ADCSR_TRGE 0x10 /* A/D Trigger Enable */ | ||
87 | #define HD64465_ADCSR_ADIE 0x08 /* A/D Interrupt Enable */ | ||
88 | #define HD64465_ADCSR_SCAN 0x04 /* A/D Scan Mode */ | ||
89 | #define HD64465_ADCSR_CH_MASK 0x03 /* A/D Channel */ | ||
90 | #define HD64465_REG_ADCALCR 0x1E00A /* A/D calibration sample control */ | ||
91 | #define HD64465_REG_ADCAL 0x1E00C /* A/D calibration data register */ | ||
92 | |||
93 | |||
94 | /* General Purpose I/O ports registers */ | ||
95 | #define HD64465_REG_GPACR 0x14000 /* Port A Control Register */ | ||
96 | #define HD64465_REG_GPBCR 0x14002 /* Port B Control Register */ | ||
97 | #define HD64465_REG_GPCCR 0x14004 /* Port C Control Register */ | ||
98 | #define HD64465_REG_GPDCR 0x14006 /* Port D Control Register */ | ||
99 | #define HD64465_REG_GPECR 0x14008 /* Port E Control Register */ | ||
100 | #define HD64465_REG_GPADR 0x14010 /* Port A Data Register */ | ||
101 | #define HD64465_REG_GPBDR 0x14012 /* Port B Data Register */ | ||
102 | #define HD64465_REG_GPCDR 0x14014 /* Port C Data Register */ | ||
103 | #define HD64465_REG_GPDDR 0x14016 /* Port D Data Register */ | ||
104 | #define HD64465_REG_GPEDR 0x14018 /* Port E Data Register */ | ||
105 | #define HD64465_REG_GPAICR 0x14020 /* Port A Interrupt Control Register */ | ||
106 | #define HD64465_REG_GPBICR 0x14022 /* Port B Interrupt Control Register */ | ||
107 | #define HD64465_REG_GPCICR 0x14024 /* Port C Interrupt Control Register */ | ||
108 | #define HD64465_REG_GPDICR 0x14026 /* Port D Interrupt Control Register */ | ||
109 | #define HD64465_REG_GPEICR 0x14028 /* Port E Interrupt Control Register */ | ||
110 | #define HD64465_REG_GPAISR 0x14040 /* Port A Interrupt Status Register */ | ||
111 | #define HD64465_REG_GPBISR 0x14042 /* Port B Interrupt Status Register */ | ||
112 | #define HD64465_REG_GPCISR 0x14044 /* Port C Interrupt Status Register */ | ||
113 | #define HD64465_REG_GPDISR 0x14046 /* Port D Interrupt Status Register */ | ||
114 | #define HD64465_REG_GPEISR 0x14048 /* Port E Interrupt Status Register */ | ||
115 | |||
116 | /* PCMCIA bridge interface */ | ||
117 | #define HD64465_REG_PCC0ISR 0x12000 /* socket 0 interface status */ | ||
118 | #define HD64465_PCCISR_PREADY 0x80 /* mem card ready / io card IREQ */ | ||
119 | #define HD64465_PCCISR_PIREQ 0x80 | ||
120 | #define HD64465_PCCISR_PMWP 0x40 /* mem card write-protected */ | ||
121 | #define HD64465_PCCISR_PVS2 0x20 /* voltage select pin 2 */ | ||
122 | #define HD64465_PCCISR_PVS1 0x10 /* voltage select pin 1 */ | ||
123 | #define HD64465_PCCISR_PCD_MASK 0x0c /* card detect */ | ||
124 | #define HD64465_PCCISR_PBVD_MASK 0x03 /* battery voltage */ | ||
125 | #define HD64465_PCCISR_PBVD_BATGOOD 0x03 /* battery good */ | ||
126 | #define HD64465_PCCISR_PBVD_BATWARN 0x01 /* battery low warning */ | ||
127 | #define HD64465_PCCISR_PBVD_BATDEAD1 0x02 /* battery dead */ | ||
128 | #define HD64465_PCCISR_PBVD_BATDEAD2 0x00 /* battery dead */ | ||
129 | #define HD64465_REG_PCC0GCR 0x12002 /* socket 0 general control */ | ||
130 | #define HD64465_PCCGCR_PDRV 0x80 /* output drive */ | ||
131 | #define HD64465_PCCGCR_PCCR 0x40 /* PC card reset */ | ||
132 | #define HD64465_PCCGCR_PCCT 0x20 /* PC card type, 1=IO&mem, 0=mem */ | ||
133 | #define HD64465_PCCGCR_PVCC0 0x10 /* voltage control pin VCC0SEL0 */ | ||
134 | #define HD64465_PCCGCR_PMMOD 0x08 /* memory mode */ | ||
135 | #define HD64465_PCCGCR_PPA25 0x04 /* pin A25 */ | ||
136 | #define HD64465_PCCGCR_PPA24 0x02 /* pin A24 */ | ||
137 | #define HD64465_PCCGCR_PREG 0x01 /* ping PCC0REG# */ | ||
138 | #define HD64465_REG_PCC0CSCR 0x12004 /* socket 0 card status change */ | ||
139 | #define HD64465_PCCCSCR_PSCDI 0x80 /* sw card detect intr */ | ||
140 | #define HD64465_PCCCSCR_PSWSEL 0x40 /* power select */ | ||
141 | #define HD64465_PCCCSCR_PIREQ 0x20 /* IREQ intr req */ | ||
142 | #define HD64465_PCCCSCR_PSC 0x10 /* STSCHG (status change) pin */ | ||
143 | #define HD64465_PCCCSCR_PCDC 0x08 /* CD (card detect) change */ | ||
144 | #define HD64465_PCCCSCR_PRC 0x04 /* ready change */ | ||
145 | #define HD64465_PCCCSCR_PBW 0x02 /* battery warning change */ | ||
146 | #define HD64465_PCCCSCR_PBD 0x01 /* battery dead change */ | ||
147 | #define HD64465_REG_PCC0CSCIER 0x12006 /* socket 0 card status change interrupt enable */ | ||
148 | #define HD64465_PCCCSCIER_PCRE 0x80 /* change reset enable */ | ||
149 | #define HD64465_PCCCSCIER_PIREQE_MASK 0x60 /* IREQ enable */ | ||
150 | #define HD64465_PCCCSCIER_PIREQE_DISABLED 0x00 /* IREQ disabled */ | ||
151 | #define HD64465_PCCCSCIER_PIREQE_LEVEL 0x20 /* IREQ level-triggered */ | ||
152 | #define HD64465_PCCCSCIER_PIREQE_FALLING 0x40 /* IREQ falling-edge-trig */ | ||
153 | #define HD64465_PCCCSCIER_PIREQE_RISING 0x60 /* IREQ rising-edge-trig */ | ||
154 | #define HD64465_PCCCSCIER_PSCE 0x10 /* status change enable */ | ||
155 | #define HD64465_PCCCSCIER_PCDE 0x08 /* card detect change enable */ | ||
156 | #define HD64465_PCCCSCIER_PRE 0x04 /* ready change enable */ | ||
157 | #define HD64465_PCCCSCIER_PBWE 0x02 /* battery warn change enable */ | ||
158 | #define HD64465_PCCCSCIER_PBDE 0x01 /* battery dead change enable*/ | ||
159 | #define HD64465_REG_PCC0SCR 0x12008 /* socket 0 software control */ | ||
160 | #define HD64465_PCCSCR_SHDN 0x10 /* TPS2206 SHutDowN pin */ | ||
161 | #define HD64465_PCCSCR_SWP 0x01 /* write protect */ | ||
162 | #define HD64465_REG_PCCPSR 0x1200A /* serial power switch control */ | ||
163 | #define HD64465_REG_PCC1ISR 0x12010 /* socket 1 interface status */ | ||
164 | #define HD64465_REG_PCC1GCR 0x12012 /* socket 1 general control */ | ||
165 | #define HD64465_REG_PCC1CSCR 0x12014 /* socket 1 card status change */ | ||
166 | #define HD64465_REG_PCC1CSCIER 0x12016 /* socket 1 card status change interrupt enable */ | ||
167 | #define HD64465_REG_PCC1SCR 0x12018 /* socket 1 software control */ | ||
168 | |||
169 | |||
170 | /* PS/2 Keyboard and mouse controller -- *not* register compatible */ | ||
171 | #define HD64465_REG_KBCSR 0x1dc00 /* Keyboard Control/Status reg */ | ||
172 | #define HD64465_KBCSR_KBCIE 0x8000 /* KBCK Input Enable */ | ||
173 | #define HD64465_KBCSR_KBCOE 0x4000 /* KBCK Output Enable */ | ||
174 | #define HD64465_KBCSR_KBDOE 0x2000 /* KB DATA Output Enable */ | ||
175 | #define HD64465_KBCSR_KBCD 0x1000 /* KBCK Driven */ | ||
176 | #define HD64465_KBCSR_KBDD 0x0800 /* KB DATA Driven */ | ||
177 | #define HD64465_KBCSR_KBCS 0x0400 /* KBCK pin Status */ | ||
178 | #define HD64465_KBCSR_KBDS 0x0200 /* KB DATA pin Status */ | ||
179 | #define HD64465_KBCSR_KBDP 0x0100 /* KB DATA Parity bit */ | ||
180 | #define HD64465_KBCSR_KBD_MASK 0x00ff /* KD DATA shift reg */ | ||
181 | #define HD64465_REG_KBISR 0x1dc04 /* Keyboard Interrupt Status reg */ | ||
182 | #define HD64465_KBISR_KBRDF 0x0001 /* KB Received Data Full */ | ||
183 | #define HD64465_REG_MSCSR 0x1dc10 /* Mouse Control/Status reg */ | ||
184 | #define HD64465_REG_MSISR 0x1dc14 /* Mouse Interrupt Status reg */ | ||
185 | |||
186 | |||
187 | /* | ||
188 | * Logical address at which the HD64465 is mapped. Note that this | ||
189 | * should always be in the P2 segment (uncached and untranslated). | ||
190 | */ | ||
191 | #ifndef CONFIG_HD64465_IOBASE | ||
192 | #define CONFIG_HD64465_IOBASE 0xb0000000 | ||
193 | #endif | ||
194 | /* | ||
195 | * The HD64465 multiplexes all its modules' interrupts onto | ||
196 | * this single interrupt. | ||
197 | */ | ||
198 | #ifndef CONFIG_HD64465_IRQ | ||
199 | #define CONFIG_HD64465_IRQ 5 | ||
200 | #endif | ||
201 | |||
202 | |||
203 | #define _HD64465_IO_MASK 0xf8000000 | ||
204 | #define is_hd64465_addr(addr) \ | ||
205 | ((addr & _HD64465_IO_MASK) == (CONFIG_HD64465_IOBASE & _HD64465_IO_MASK)) | ||
206 | |||
207 | /* | ||
208 | * A range of 16 virtual interrupts generated by | ||
209 | * demuxing the HD64465 muxed interrupt. | ||
210 | */ | ||
211 | #define HD64465_IRQ_BASE OFFCHIP_IRQ_BASE | ||
212 | #define HD64465_IRQ_NUM 16 | ||
213 | #define HD64465_IRQ_ADC (HD64465_IRQ_BASE+0) | ||
214 | #define HD64465_IRQ_USB (HD64465_IRQ_BASE+1) | ||
215 | #define HD64465_IRQ_SCDI (HD64465_IRQ_BASE+2) | ||
216 | #define HD64465_IRQ_PARALLEL (HD64465_IRQ_BASE+3) | ||
217 | /* bit 4 is reserved */ | ||
218 | #define HD64465_IRQ_UART (HD64465_IRQ_BASE+5) | ||
219 | #define HD64465_IRQ_IRDA (HD64465_IRQ_BASE+6) | ||
220 | #define HD64465_IRQ_PS2MOUSE (HD64465_IRQ_BASE+7) | ||
221 | #define HD64465_IRQ_KBC (HD64465_IRQ_BASE+8) | ||
222 | #define HD64465_IRQ_TIMER1 (HD64465_IRQ_BASE+9) | ||
223 | #define HD64465_IRQ_TIMER0 (HD64465_IRQ_BASE+10) | ||
224 | #define HD64465_IRQ_GPIO (HD64465_IRQ_BASE+11) | ||
225 | #define HD64465_IRQ_AFE (HD64465_IRQ_BASE+12) | ||
226 | #define HD64465_IRQ_PCMCIA1 (HD64465_IRQ_BASE+13) | ||
227 | #define HD64465_IRQ_PCMCIA0 (HD64465_IRQ_BASE+14) | ||
228 | #define HD64465_IRQ_PS2KBD (HD64465_IRQ_BASE+15) | ||
229 | |||
230 | /* Constants for PCMCIA mappings */ | ||
231 | #define HD64465_PCC_WINDOW 0x01000000 | ||
232 | |||
233 | #define HD64465_PCC0_BASE 0xb8000000 /* area 6 */ | ||
234 | #define HD64465_PCC0_ATTR (HD64465_PCC0_BASE) | ||
235 | #define HD64465_PCC0_COMM (HD64465_PCC0_BASE+HD64465_PCC_WINDOW) | ||
236 | #define HD64465_PCC0_IO (HD64465_PCC0_BASE+2*HD64465_PCC_WINDOW) | ||
237 | |||
238 | #define HD64465_PCC1_BASE 0xb4000000 /* area 5 */ | ||
239 | #define HD64465_PCC1_ATTR (HD64465_PCC1_BASE) | ||
240 | #define HD64465_PCC1_COMM (HD64465_PCC1_BASE+HD64465_PCC_WINDOW) | ||
241 | #define HD64465_PCC1_IO (HD64465_PCC1_BASE+2*HD64465_PCC_WINDOW) | ||
242 | |||
243 | /* | ||
244 | * Base of USB controller interface (as memory) | ||
245 | */ | ||
246 | #define HD64465_USB_BASE (CONFIG_HD64465_IOBASE+0xb000) | ||
247 | #define HD64465_USB_LEN 0x1000 | ||
248 | /* | ||
249 | * Base of embedded SRAM, used for USB controller. | ||
250 | */ | ||
251 | #define HD64465_SRAM_BASE (CONFIG_HD64465_IOBASE+0x9000) | ||
252 | #define HD64465_SRAM_LEN 0x1000 | ||
253 | |||
254 | |||
255 | |||
256 | #endif /* _ASM_SH_HD64465_ */ | ||
diff --git a/arch/sh/include/asm/hd64465/io.h b/arch/sh/include/asm/hd64465/io.h deleted file mode 100644 index 139f1472e5bb..000000000000 --- a/arch/sh/include/asm/hd64465/io.h +++ /dev/null | |||
@@ -1,44 +0,0 @@ | |||
1 | /* | ||
2 | * include/asm-sh/hd64465/io.h | ||
3 | * | ||
4 | * By Greg Banks <gbanks@pocketpenguins.com> | ||
5 | * (c) 2000 PocketPenguins Inc. | ||
6 | * | ||
7 | * Derived from io_hd64461.h, which bore the message: | ||
8 | * Copyright 2000 Stuart Menefy (stuart.menefy@st.com) | ||
9 | * | ||
10 | * May be copied or modified under the terms of the GNU General Public | ||
11 | * License. See linux/COPYING for more information. | ||
12 | * | ||
13 | * IO functions for an HD64465 "Windows CE Intelligent Peripheral Controller". | ||
14 | */ | ||
15 | |||
16 | #ifndef _ASM_SH_IO_HD64465_H | ||
17 | #define _ASM_SH_IO_HD64465_H | ||
18 | |||
19 | extern unsigned char hd64465_inb(unsigned long port); | ||
20 | extern unsigned short hd64465_inw(unsigned long port); | ||
21 | extern unsigned int hd64465_inl(unsigned long port); | ||
22 | |||
23 | extern void hd64465_outb(unsigned char value, unsigned long port); | ||
24 | extern void hd64465_outw(unsigned short value, unsigned long port); | ||
25 | extern void hd64465_outl(unsigned int value, unsigned long port); | ||
26 | |||
27 | extern unsigned char hd64465_inb_p(unsigned long port); | ||
28 | extern void hd64465_outb_p(unsigned char value, unsigned long port); | ||
29 | |||
30 | extern unsigned long hd64465_isa_port2addr(unsigned long offset); | ||
31 | extern int hd64465_irq_demux(int irq); | ||
32 | /* Provision for generic secondary demux step -- used by PCMCIA code */ | ||
33 | extern void hd64465_register_irq_demux(int irq, | ||
34 | int (*demux)(int irq, void *dev), void *dev); | ||
35 | extern void hd64465_unregister_irq_demux(int irq); | ||
36 | /* Set this variable to 1 to see port traffic */ | ||
37 | extern int hd64465_io_debug; | ||
38 | /* Map a range of ports to a range of kernel virtual memory. | ||
39 | */ | ||
40 | extern void hd64465_port_map(unsigned short baseport, unsigned int nports, | ||
41 | unsigned long addr, unsigned char shift); | ||
42 | extern void hd64465_port_unmap(unsigned short baseport, unsigned int nports); | ||
43 | |||
44 | #endif /* _ASM_SH_IO_HD64465_H */ | ||
diff --git a/arch/sh/include/asm/serial.h b/arch/sh/include/asm/serial.h index e13cc948ee60..11f854dd1363 100644 --- a/arch/sh/include/asm/serial.h +++ b/arch/sh/include/asm/serial.h | |||
@@ -7,8 +7,6 @@ | |||
7 | #ifndef _ASM_SERIAL_H | 7 | #ifndef _ASM_SERIAL_H |
8 | #define _ASM_SERIAL_H | 8 | #define _ASM_SERIAL_H |
9 | 9 | ||
10 | #include <linux/kernel.h> | ||
11 | |||
12 | /* | 10 | /* |
13 | * This assumes you have a 1.8432 MHz clock for your UART. | 11 | * This assumes you have a 1.8432 MHz clock for your UART. |
14 | * | 12 | * |
@@ -18,19 +16,4 @@ | |||
18 | */ | 16 | */ |
19 | #define BASE_BAUD ( 1843200 / 16 ) | 17 | #define BASE_BAUD ( 1843200 / 16 ) |
20 | 18 | ||
21 | #define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST) | ||
22 | |||
23 | #ifdef CONFIG_HD64465 | ||
24 | #include <asm/hd64465/hd64465.h> | ||
25 | |||
26 | #define SERIAL_PORT_DFNS \ | ||
27 | /* UART CLK PORT IRQ FLAGS */ \ | ||
28 | { 0, BASE_BAUD, 0x3F8, HD64465_IRQ_UART, STD_COM_FLAGS } /* ttyS0 */ | ||
29 | |||
30 | #else | ||
31 | |||
32 | #define SERIAL_PORT_DFNS | ||
33 | |||
34 | #endif | ||
35 | |||
36 | #endif /* _ASM_SERIAL_H */ | 19 | #endif /* _ASM_SERIAL_H */ |
diff --git a/arch/sh/tools/mach-types b/arch/sh/tools/mach-types index d4fb11f7e2ee..d0c2928d1066 100644 --- a/arch/sh/tools/mach-types +++ b/arch/sh/tools/mach-types | |||
@@ -13,7 +13,6 @@ RTS7751R2D SH_RTS7751R2D | |||
13 | # List of companion chips / MFDs. | 13 | # List of companion chips / MFDs. |
14 | # | 14 | # |
15 | HD64461 HD64461 | 15 | HD64461 HD64461 |
16 | HD64465 HD64465 | ||
17 | 16 | ||
18 | # | 17 | # |
19 | # List of boards. | 18 | # List of boards. |