1 files changed, 888 insertions, 0 deletions

diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
new file mode 100644
index 000000000000..7cfd17230224
--- /dev/null
+++ b/arch/sh/Kconfig
@@ -0,0 +1,888 @@
+#
+# For a description of the syntax of this configuration file,
+# see Documentation/kbuild/kconfig-language.txt.
+#
+
+mainmenu "Linux/SuperH Kernel Configuration"
+
+config SUPERH
+        def_bool y
+        select EMBEDDED
+        help
+          The SuperH is a RISC processor targeted for use in embedded systems
+          and consumer electronics; it was also used in the Sega Dreamcast
+          gaming console.  The SuperH port has a home page at
+          <http://www.linux-sh.org/>.
+
+config SUPERH32
+        def_bool !SUPERH64
+
+config SUPERH64
+        def_bool y if CPU_SH5
+
+config RWSEM_GENERIC_SPINLOCK
+        bool
+        default y
+
+config SUPERH64
+        def_bool y if CPU_SH5
+
+config RWSEM_XCHGADD_ALGORITHM
+        bool
+
+config GENERIC_BUG
+        def_bool y
+        depends on BUG
+
+config GENERIC_FIND_NEXT_BIT
+        bool
+        default y
+
+config GENERIC_HWEIGHT
+        bool
+        default y
+
+config GENERIC_HARDIRQS
+        bool
+        default y
+
+config GENERIC_IRQ_PROBE
+        bool
+        default y
+
+config GENERIC_CALIBRATE_DELAY
+        bool
+        default y
+
+config GENERIC_IOMAP
+        bool
+
+config GENERIC_TIME
+        def_bool n
+
+config GENERIC_CLOCKEVENTS
+        def_bool n
+
+config SYS_SUPPORTS_PM
+        bool
+
+config SYS_SUPPORTS_APM_EMULATION
+        bool
+        select SYS_SUPPORTS_PM
+
+config SYS_SUPPORTS_SMP
+        bool
+
+config SYS_SUPPORTS_NUMA
+        bool
+
+config SYS_SUPPORTS_PCI
+        bool
+
+config ARCH_MAY_HAVE_PC_FDC
+        bool
+
+config STACKTRACE_SUPPORT
+        bool
+        default y
+
+config LOCKDEP_SUPPORT
+        bool
+        default y
+
+config ARCH_HAS_ILOG2_U32
+        bool
+        default n
+
+config ARCH_HAS_ILOG2_U64
+        bool
+        default n
+
+config ARCH_NO_VIRT_TO_BUS
+        def_bool y
+
+source "init/Kconfig"
+
+menu "System type"
+
+#
+# Processor families
+#
+config CPU_SH2
+        bool
+
+config CPU_SH2A
+        bool
+        select CPU_SH2
+
+config CPU_SH3
+        bool
+        select CPU_HAS_INTEVT
+        select CPU_HAS_SR_RB
+
+config CPU_SH4
+        bool
+        select CPU_HAS_INTEVT
+        select CPU_HAS_SR_RB
+        select CPU_HAS_PTEA if !CPU_SH4A || CPU_SHX2
+        select CPU_HAS_FPU if !CPU_SH4AL_DSP
+
+config CPU_SH4A
+        bool
+        select CPU_SH4
+
+config CPU_SH4AL_DSP
+        bool
+        select CPU_SH4A
+        select CPU_HAS_DSP
+
+config CPU_SH5
+        bool
+        select CPU_HAS_FPU
+
+config CPU_SHX2
+        bool
+
+config CPU_SHX3
+        bool
+
+choice
+        prompt "Processor sub-type selection"
+
+#
+# Processor subtypes
+#
+
+# SH-2 Processor Support
+
+config CPU_SUBTYPE_SH7619
+        bool "Support SH7619 processor"
+        select CPU_SH2
+
+# SH-2A Processor Support
+
+config CPU_SUBTYPE_SH7206
+        bool "Support SH7206 processor"
+        select CPU_SH2A
+
+# SH-3 Processor Support
+
+config CPU_SUBTYPE_SH7705
+        bool "Support SH7705 processor"
+        select CPU_SH3
+
+config CPU_SUBTYPE_SH7706
+        bool "Support SH7706 processor"
+        select CPU_SH3
+        help
+          Select SH7706 if you have a 133 Mhz SH-3 HD6417706 CPU.
+
+config CPU_SUBTYPE_SH7707
+        bool "Support SH7707 processor"
+        select CPU_SH3
+        help
+          Select SH7707 if you have a  60 Mhz SH-3 HD6417707 CPU.
+
+config CPU_SUBTYPE_SH7708
+        bool "Support SH7708 processor"
+        select CPU_SH3
+        help
+          Select SH7708 if you have a  60 Mhz SH-3 HD6417708S or
+          if you have a 100 Mhz SH-3 HD6417708R CPU.
+
+config CPU_SUBTYPE_SH7709
+        bool "Support SH7709 processor"
+        select CPU_SH3
+        help
+          Select SH7709 if you have a  80 Mhz SH-3 HD6417709 CPU.
+
+config CPU_SUBTYPE_SH7710
+        bool "Support SH7710 processor"
+        select CPU_SH3
+        select CPU_HAS_DSP
+        help
+          Select SH7710 if you have a SH3-DSP SH7710 CPU.
+
+config CPU_SUBTYPE_SH7712
+        bool "Support SH7712 processor"
+        select CPU_SH3
+        select CPU_HAS_DSP
+        help
+          Select SH7712 if you have a SH3-DSP SH7712 CPU.
+
+config CPU_SUBTYPE_SH7720
+        bool "Support SH7720 processor"
+        select CPU_SH3
+        select CPU_HAS_DSP
+        help
+          Select SH7720 if you have a SH3-DSP SH7720 CPU.
+
+# SH-4 Processor Support
+
+config CPU_SUBTYPE_SH7750
+        bool "Support SH7750 processor"
+        select CPU_SH4
+        help
+          Select SH7750 if you have a 200 Mhz SH-4 HD6417750 CPU.
+
+config CPU_SUBTYPE_SH7091
+        bool "Support SH7091 processor"
+        select CPU_SH4
+        help
+          Select SH7091 if you have an SH-4 based Sega device (such as
+          the Dreamcast, Naomi, and Naomi 2).
+
+config CPU_SUBTYPE_SH7750R
+        bool "Support SH7750R processor"
+        select CPU_SH4
+
+config CPU_SUBTYPE_SH7750S
+        bool "Support SH7750S processor"
+        select CPU_SH4
+
+config CPU_SUBTYPE_SH7751
+        bool "Support SH7751 processor"
+        select CPU_SH4
+        help
+          Select SH7751 if you have a 166 Mhz SH-4 HD6417751 CPU,
+          or if you have a HD6417751R CPU.
+
+config CPU_SUBTYPE_SH7751R
+        bool "Support SH7751R processor"
+        select CPU_SH4
+
+config CPU_SUBTYPE_SH7760
+        bool "Support SH7760 processor"
+        select CPU_SH4
+
+config CPU_SUBTYPE_SH4_202
+        bool "Support SH4-202 processor"
+        select CPU_SH4
+
+# SH-4A Processor Support
+
+config CPU_SUBTYPE_SH7770
+        bool "Support SH7770 processor"
+        select CPU_SH4A
+
+config CPU_SUBTYPE_SH7780
+        bool "Support SH7780 processor"
+        select CPU_SH4A
+
+config CPU_SUBTYPE_SH7785
+        bool "Support SH7785 processor"
+        select CPU_SH4A
+        select CPU_SHX2
+        select ARCH_SPARSEMEM_ENABLE
+        select SYS_SUPPORTS_NUMA
+
+config CPU_SUBTYPE_SHX3
+        bool "Support SH-X3 processor"
+        select CPU_SH4A
+        select CPU_SHX3
+        select ARCH_SPARSEMEM_ENABLE
+        select SYS_SUPPORTS_NUMA
+        select SYS_SUPPORTS_SMP
+
+# SH4AL-DSP Processor Support
+
+config CPU_SUBTYPE_SH7343
+        bool "Support SH7343 processor"
+        select CPU_SH4AL_DSP
+
+config CPU_SUBTYPE_SH7722
+        bool "Support SH7722 processor"
+        select CPU_SH4AL_DSP
+        select CPU_SHX2
+        select ARCH_SPARSEMEM_ENABLE
+        select SYS_SUPPORTS_NUMA
+
+# SH-5 Processor Support
+
+config CPU_SUBTYPE_SH5_101
+        bool "Support SH5-101 processor"
+        select CPU_SH5
+
+config CPU_SUBTYPE_SH5_103
+        bool "Support SH5-103 processor"
+
+endchoice
+
+source "arch/sh/mm/Kconfig"
+source "arch/sh/Kconfig.cpu"
+
+menu "Board support"
+
+config SOLUTION_ENGINE
+        bool
+
+config SH_SOLUTION_ENGINE
+        bool "SolutionEngine"
+        select SOLUTION_ENGINE
+        select CPU_HAS_IPR_IRQ
+        depends on CPU_SUBTYPE_SH7705 || CPU_SUBTYPE_SH7709 || CPU_SUBTYPE_SH7710 || \
+          CPU_SUBTYPE_SH7712 || CPU_SUBTYPE_SH7750 || CPU_SUBTYPE_SH7750S || \
+          CPU_SUBTYPE_SH7750R 
+        help
+          Select SolutionEngine if configuring for a Hitachi SH7705, SH7709,
+          SH7710, SH7712, SH7750, SH7750S or SH7750R evaluation board.
+
+config SH_7206_SOLUTION_ENGINE
+        bool "SolutionEngine7206"
+        select SOLUTION_ENGINE
+        depends on CPU_SUBTYPE_SH7206
+        help
+          Select 7206 SolutionEngine if configuring for a Hitachi SH7206
+          evaluation board.
+
+config SH_7619_SOLUTION_ENGINE
+        bool "SolutionEngine7619"
+        select SOLUTION_ENGINE
+        depends on CPU_SUBTYPE_SH7619
+        help
+          Select 7619 SolutionEngine if configuring for a Hitachi SH7619
+          evaluation board.
+        
+config SH_7722_SOLUTION_ENGINE
+        bool "SolutionEngine7722"
+        select SOLUTION_ENGINE
+        depends on CPU_SUBTYPE_SH7722
+        help
+          Select 7722 SolutionEngine if configuring for a Hitachi SH772
+          evaluation board.
+
+config SH_7751_SOLUTION_ENGINE
+        bool "SolutionEngine7751"
+        select SOLUTION_ENGINE
+        select CPU_HAS_IPR_IRQ
+        depends on CPU_SUBTYPE_SH7751
+        help
+          Select 7751 SolutionEngine if configuring for a Hitachi SH7751
+          evaluation board.
+          
+config SH_7780_SOLUTION_ENGINE
+        bool "SolutionEngine7780"
+        select SOLUTION_ENGINE
+        select SYS_SUPPORTS_PCI
+        depends on CPU_SUBTYPE_SH7780
+        help
+          Select 7780 SolutionEngine if configuring for a Renesas SH7780
+          evaluation board.
+
+config SH_7343_SOLUTION_ENGINE
+        bool "SolutionEngine7343"
+        select SOLUTION_ENGINE
+        depends on CPU_SUBTYPE_SH7343
+        help
+          Select 7343 SolutionEngine if configuring for a Hitachi
+          SH7343 (SH-Mobile 3AS) evaluation board.
+
+config SH_7751_SYSTEMH
+        bool "SystemH7751R"
+        depends on CPU_SUBTYPE_SH7751R
+        help
+          Select SystemH if you are configuring for a Renesas SystemH
+          7751R evaluation board.
+
+config SH_HP6XX
+        bool "HP6XX"
+        select SYS_SUPPORTS_APM_EMULATION
+        select HD6446X_SERIES
+        depends on CPU_SUBTYPE_SH7709
+        help
+          Select HP6XX if configuring for a HP jornada HP6xx.
+          More information (hardware only) at
+          <http://www.hp.com/jornada/>.
+
+config SH_DREAMCAST
+        bool "Dreamcast"
+        select SYS_SUPPORTS_PCI
+        depends on CPU_SUBTYPE_SH7091
+        help
+          Select Dreamcast if configuring for a SEGA Dreamcast.
+          More information at <http://www.linux-sh.org>
+
+config SH_MPC1211
+        bool "Interface MPC1211"
+        depends on CPU_SUBTYPE_SH7751 && BROKEN
+        help
+          CTP/PCI-SH02 is a CPU module computer that is produced
+          by Interface Corporation.
+          More information at <http://www.interface.co.jp>
+
+config SH_SH03
+        bool "Interface CTP/PCI-SH03"
+        depends on CPU_SUBTYPE_SH7751
+        select CPU_HAS_IPR_IRQ
+        select SYS_SUPPORTS_PCI
+        help
+          CTP/PCI-SH03 is a CPU module computer that is produced
+          by Interface Corporation.
+          More information at <http://www.interface.co.jp>
+
+config SH_SECUREEDGE5410
+        bool "SecureEdge5410"
+        depends on CPU_SUBTYPE_SH7751R
+        select CPU_HAS_IPR_IRQ
+        select SYS_SUPPORTS_PCI
+        help
+          Select SecureEdge5410 if configuring for a SnapGear SH board.
+          This includes both the OEM SecureEdge products as well as the
+          SME product line.
+
+config SH_HS7751RVOIP
+        bool "HS7751RVOIP"
+        depends on CPU_SUBTYPE_SH7751R
+        help
+          Select HS7751RVOIP if configuring for a Renesas Technology
+          Sales VoIP board.
+
+config SH_7710VOIPGW
+        bool "SH7710-VOIP-GW"
+        depends on CPU_SUBTYPE_SH7710
+        help
+          Select this option to build a kernel for the SH7710 based
+          VOIP GW.
+
+config SH_RTS7751R2D
+        bool "RTS7751R2D"
+        depends on CPU_SUBTYPE_SH7751R
+        select SYS_SUPPORTS_PCI
+        help
+          Select RTS7751R2D if configuring for a Renesas Technology
+          Sales SH-Graphics board.
+
+config SH_HIGHLANDER
+        bool "Highlander"
+        depends on CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785
+        select SYS_SUPPORTS_PCI
+
+config SH_EDOSK7705
+        bool "EDOSK7705"
+        depends on CPU_SUBTYPE_SH7705
+
+config SH_SH4202_MICRODEV
+        bool "SH4-202 MicroDev"
+        depends on CPU_SUBTYPE_SH4_202
+        help
+          Select SH4-202 MicroDev if configuring for a SuperH MicroDev board
+          with an SH4-202 CPU.
+
+config SH_LANDISK
+        bool "LANDISK"
+        depends on CPU_SUBTYPE_SH7751R
+        select SYS_SUPPORTS_PCI
+        help
+          I-O DATA DEVICE, INC. "LANDISK Series" support.
+
+config SH_TITAN
+        bool "TITAN"
+        depends on CPU_SUBTYPE_SH7751R
+        select CPU_HAS_IPR_IRQ
+        select SYS_SUPPORTS_PCI
+        help
+          Select Titan if you are configuring for a Nimble Microsystems
+          NetEngine NP51R.
+
+config SH_SHMIN
+        bool "SHMIN"
+        depends on CPU_SUBTYPE_SH7706
+        select CPU_HAS_IPR_IRQ
+        help
+          Select SHMIN if configuring for the SHMIN board.
+
+config SH_LBOX_RE2
+        bool "L-BOX RE2"
+        depends on CPU_SUBTYPE_SH7751R
+        select SYS_SUPPORTS_PCI
+        help
+          Select L-BOX RE2 if configuring for the NTT COMWARE L-BOX RE2.
+
+config SH_X3PROTO
+        bool "SH-X3 Prototype board"
+        depends on CPU_SUBTYPE_SHX3
+
+config SH_MAGIC_PANEL_R2
+        bool "Magic Panel R2"
+        depends on CPU_SUBTYPE_SH7720
+        help
+          Select Magic Panel R2 if configuring for Magic Panel R2.
+
+config SH_SIMULATOR
+        bool "Simulator"
+        depends on SUPERH64
+
+config SH_CAYMAN
+        bool "Hitachi Cayman"
+        depends on CPU_SUBTYPE_SH5_101 || CPU_SUBTYPE_SH5_103
+
+config SH_HARP
+        bool "ST50 Harp"
+        depends on CPU_SH5
+
+endmenu
+
+source "arch/sh/boards/renesas/hs7751rvoip/Kconfig"
+source "arch/sh/boards/renesas/rts7751r2d/Kconfig"
+source "arch/sh/boards/renesas/r7780rp/Kconfig"
+source "arch/sh/boards/magicpanelr2/Kconfig"
+
+menu "Timer and clock configuration"
+
+config SH_TMU
+        bool "TMU timer support"
+        depends on CPU_SH3 || CPU_SH4
+        select GENERIC_TIME
+        select GENERIC_CLOCKEVENTS
+        default y
+        help
+          This enables the use of the TMU as the system timer.
+
+config SH_CMT
+        bool "CMT timer support"
+        depends on CPU_SH2
+        default y
+        help
+          This enables the use of the CMT as the system timer.
+
+config SH_MTU2
+        bool "MTU2 timer support"
+        depends on CPU_SH2A
+        default n
+        help
+          This enables the use of the MTU2 as the system timer.
+
+config SH_TIMER_IRQ
+        int
+        default "28" if CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785
+        default "86" if CPU_SUBTYPE_SH7619
+        default "140" if CPU_SUBTYPE_SH7206
+        default "16"
+
+config SH_PCLK_FREQ
+        int "Peripheral clock frequency (in Hz)"
+        default "27000000" if CPU_SUBTYPE_SH7343
+        default "31250000" if CPU_SUBTYPE_SH7619
+        default "32000000" if CPU_SUBTYPE_SH7722
+        default "33333333" if CPU_SUBTYPE_SH7770 || \
+                              CPU_SUBTYPE_SH7760 || CPU_SUBTYPE_SH7705 || \
+                              CPU_SUBTYPE_SH7206
+        default "60000000" if CPU_SUBTYPE_SH7751 || CPU_SUBTYPE_SH7751R
+        default "66000000" if CPU_SUBTYPE_SH4_202
+        default "50000000"
+        help
+          This option is used to specify the peripheral clock frequency.
+          This is necessary for determining the reference clock value on
+          platforms lacking an RTC.
+
+config SH_CLK_MD
+        int "CPU Mode Pin Setting"
+        depends on CPU_SUBTYPE_SH7619 || CPU_SUBTYPE_SH7206
+        default 6 if CPU_SUBTYPE_SH7206
+        default 5 if CPU_SUBTYPE_SH7619
+        default 0
+        help
+          MD2 - MD0 pin setting.
+
+source "kernel/time/Kconfig"
+
+endmenu
+
+menu "CPU Frequency scaling"
+
+source "drivers/cpufreq/Kconfig"
+
+config SH_CPU_FREQ
+        tristate "SuperH CPU Frequency driver"
+        depends on CPU_FREQ
+        select CPU_FREQ_TABLE
+        help
+          This adds the cpufreq driver for SuperH. At present, only
+          the SH-4 is supported.
+
+          For details, take a look at <file:Documentation/cpu-freq>.
+
+          If unsure, say N.
+
+endmenu
+
+source "arch/sh/drivers/Kconfig"
+
+endmenu
+
+config ISA_DMA_API
+        bool
+        depends on SH_MPC1211
+        default y
+
+menu "Kernel features"
+
+source kernel/Kconfig.hz
+
+config KEXEC
+        bool "kexec system call (EXPERIMENTAL)"
+        depends on EXPERIMENTAL
+        help
+          kexec is a system call that implements the ability to shutdown your
+          current kernel, and to start another kernel.  It is like a reboot
+          but it is independent of the system firmware.  And like a reboot
+          you can start any kernel with it, not just Linux.
+
+          The name comes from the similarity to the exec system call.
+
+          It is an ongoing process to be certain the hardware in a machine
+          is properly shutdown, so do not be surprised if this code does not
+          initially work for you.  It may help to enable device hotplugging
+          support.  As of this writing the exact hardware interface is
+          strongly in flux, so no good recommendation can be made.
+
+config CRASH_DUMP
+        bool "kernel crash dumps (EXPERIMENTAL)"
+        depends on EXPERIMENTAL
+        help
+          Generate crash dump after being started by kexec.
+          This should be normally only set in special crash dump kernels
+          which are loaded in the main kernel with kexec-tools into
+          a specially reserved region and then later executed after
+          a crash by kdump/kexec. The crash dump kernel must be compiled
+          to a memory address not used by the main kernel using
+          MEMORY_START.
+
+          For more details see Documentation/kdump/kdump.txt
+
+config SMP
+        bool "Symmetric multi-processing support"
+        depends on SYS_SUPPORTS_SMP
+        ---help---
+          This enables support for systems with more than one CPU. If you have
+          a system with only one CPU, like most personal computers, say N. If
+          you have a system with more than one CPU, say Y.
+
+          If you say N here, the kernel will run on single and multiprocessor
+          machines, but will use only one CPU of a multiprocessor machine. If
+          you say Y here, the kernel will run on many, but not all,
+          singleprocessor machines. On a singleprocessor machine, the kernel
+          will run faster if you say N here.
+
+          People using multiprocessor machines who say Y here should also say
+          Y to "Enhanced Real Time Clock Support", below.
+
+          See also the <file:Documentation/smp.txt>,
+          <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available
+          at <http://www.tldp.org/docs.html#howto>.
+
+          If you don't know what to do here, say N.
+
+config NR_CPUS
+        int "Maximum number of CPUs (2-32)"
+        range 2 32
+        depends on SMP
+        default "4" if CPU_SHX3
+        default "2"
+        help
+          This allows you to specify the maximum number of CPUs which this
+          kernel will support.  The maximum supported value is 32 and the
+          minimum value which makes sense is 2.
+
+          This is purely to save memory - each supported CPU adds
+          approximately eight kilobytes to the kernel image.
+
+source "kernel/Kconfig.preempt"
+
+config GUSA
+        def_bool y
+        depends on !SMP
+        help
+          This enables support for gUSA (general UserSpace Atomicity).
+          This is the default implementation for both UP and non-ll/sc
+          CPUs, and is used by the libc, amongst others.
+
+          For additional information, design information can be found 
+          in <http://lc.linux.or.jp/lc2002/papers/niibe0919p.pdf>.
+
+          This should only be disabled for special cases where alternate
+          atomicity implementations exist.
+
+endmenu
+
+menu "Boot options"
+
+config ZERO_PAGE_OFFSET
+        hex "Zero page offset"
+        default "0x00004000" if SH_MPC1211 || SH_SH03
+        default "0x00010000" if PAGE_SIZE_64KB
+        default "0x00002000" if PAGE_SIZE_8KB
+        default "0x00001000"
+        help
+          This sets the default offset of zero page.
+
+config BOOT_LINK_OFFSET
+        hex "Link address offset for booting"
+        default "0x00800000"
+        help
+          This option allows you to set the link address offset of the zImage.
+          This can be useful if you are on a board which has a small amount of
+          memory.
+
+config UBC_WAKEUP
+        bool "Wakeup UBC on startup"
+        depends on CPU_SH4 && !CPU_SH4A
+        help
+          Selecting this option will wakeup the User Break Controller (UBC) on
+          startup. Although the UBC is left in an awake state when the processor
+          comes up, some boot loaders misbehave by putting the UBC to sleep in a
+          power saving state, which causes issues with things like ptrace().
+
+          If unsure, say N.
+
+config CMDLINE_BOOL
+        bool "Default bootloader kernel arguments"
+
+config CMDLINE
+        string "Initial kernel command string"
+        depends on CMDLINE_BOOL
+        default "console=ttySC1,115200"
+
+endmenu
+
+menu "Bus options"
+
+# Even on SuperH devices which don't have an ISA bus,
+# this variable helps the PCMCIA modules handle
+# IRQ requesting properly -- Greg Banks.
+#
+# Though we're generally not interested in it when
+# we're not using PCMCIA, so we make it dependent on
+# PCMCIA outright. -- PFM.
+config ISA
+        def_bool y
+        depends on PCMCIA && HD6446X_SERIES
+        help
+          Find out whether you have ISA slots on your motherboard.  ISA is the
+          name of a bus system, i.e. the way the CPU talks to the other stuff
+          inside your box.  Other bus systems are PCI, EISA, MicroChannel
+          (MCA) or VESA.  ISA is an older system, now being displaced by PCI;
+          newer boards don't support it.  If you have ISA, say Y, otherwise N.
+
+config EISA
+        bool
+        ---help---
+          The Extended Industry Standard Architecture (EISA) bus was
+          developed as an open alternative to the IBM MicroChannel bus.
+
+          The EISA bus provided some of the features of the IBM MicroChannel
+          bus while maintaining backward compatibility with cards made for
+          the older ISA bus.  The EISA bus saw limited use between 1988 and
+          1995 when it was made obsolete by the PCI bus.
+
+          Say Y here if you are building a kernel for an EISA-based machine.
+
+          Otherwise, say N.
+
+config MCA
+        bool
+        help
+          MicroChannel Architecture is found in some IBM PS/2 machines and
+          laptops.  It is a bus system similar to PCI or ISA. See
+          <file:Documentation/mca.txt> (and especially the web page given
+          there) before attempting to build an MCA bus kernel.
+
+config SBUS
+        bool
+
+config SUPERHYWAY
+        tristate "SuperHyway Bus support"
+        depends on CPU_SUBTYPE_SH4_202
+
+config MAPLE
+       bool "Maple Bus support"
+       depends on SH_DREAMCAST
+       help
+         The Maple Bus is SEGA's serial communication bus for peripherals
+         on the Dreamcast. Without this bus support you won't be able to
+         get your Dreamcast keyboard etc to work, so most users
+         probably want to say 'Y' here, unless you are only using the
+         Dreamcast with a serial line terminal or a remote network
+         connection.
+
+config CF_ENABLER
+        bool "Compact Flash Enabler support"
+        depends on SOLUTION_ENGINE || SH_SH03
+        ---help---
+          Compact Flash is a small, removable mass storage device introduced
+          in 1994 originally as a PCMCIA device.  If you say `Y' here, you
+          compile in support for Compact Flash devices directly connected to
+          a SuperH processor.  A Compact Flash FAQ is available at
+          <http://www.compactflash.org/faqs/faq.htm>.
+
+          If your board has "Directly Connected" CompactFlash at area 5 or 6,
+          you may want to enable this option.  Then, you can use CF as
+          primary IDE drive (only tested for SanDisk).
+
+          If in doubt, select 'N'.
+
+choice
+        prompt "Compact Flash Connection Area"
+        depends on CF_ENABLER
+        default CF_AREA6
+
+config CF_AREA5
+        bool "Area5"
+        help
+          If your board has "Directly Connected" CompactFlash, You should
+          select the area where your CF is connected to.
+
+          - "Area5" if CompactFlash is connected to Area 5 (0x14000000)
+          - "Area6" if it is connected to Area 6 (0x18000000)
+
+          "Area6" will work for most boards.
+
+config CF_AREA6
+        bool "Area6"
+
+endchoice
+
+config CF_BASE_ADDR
+        hex
+        depends on CF_ENABLER
+        default "0xb8000000" if CF_AREA6
+        default "0xb4000000" if CF_AREA5
+
+source "arch/sh/drivers/pci/Kconfig"
+
+source "drivers/pci/Kconfig"
+
+source "drivers/pcmcia/Kconfig"
+
+source "drivers/pci/hotplug/Kconfig"
+
+endmenu
+
+menu "Executable file formats"
+
+source "fs/Kconfig.binfmt"
+
+endmenu
+
+menu "Power management options (EXPERIMENTAL)"
+depends on EXPERIMENTAL && SYS_SUPPORTS_PM
+
+source kernel/power/Kconfig
+
+endmenu
+
+source "net/Kconfig"
+
+source "drivers/Kconfig"
+
+source "fs/Kconfig"
+
+source "kernel/Kconfig.instrumentation"
+
+source "arch/sh/Kconfig.debug"
+
+source "security/Kconfig"
+
+source "crypto/Kconfig"
+
+source "lib/Kconfig"