diff options
Diffstat (limited to 'arch/powerpc')
-rw-r--r-- | arch/powerpc/boot/dts/pcm030.dts | 363 | ||||
-rw-r--r-- | arch/powerpc/configs/52xx/pcm030_defconfig | 1109 | ||||
-rw-r--r-- | arch/powerpc/platforms/52xx/mpc5200_simple.c | 1 |
3 files changed, 1473 insertions, 0 deletions
diff --git a/arch/powerpc/boot/dts/pcm030.dts b/arch/powerpc/boot/dts/pcm030.dts new file mode 100644 index 000000000000..7c1bb952360c --- /dev/null +++ b/arch/powerpc/boot/dts/pcm030.dts | |||
@@ -0,0 +1,363 @@ | |||
1 | /* | ||
2 | * phyCORE-MPC5200B-tiny (pcm030) board Device Tree Source | ||
3 | * | ||
4 | * Copyright 2006 Pengutronix | ||
5 | * Sascha Hauer <s.hauer@pengutronix.de> | ||
6 | * Copyright 2007 Pengutronix | ||
7 | * Juergen Beisert <j.beisert@pengutronix.de> | ||
8 | * | ||
9 | * This program is free software; you can redistribute it and/or modify it | ||
10 | * under the terms of the GNU General Public License as published by the | ||
11 | * Free Software Foundation; either version 2 of the License, or (at your | ||
12 | * option) any later version. | ||
13 | */ | ||
14 | |||
15 | /dts-v1/; | ||
16 | |||
17 | / { | ||
18 | model = "phytec,pcm030"; | ||
19 | compatible = "phytec,pcm030"; | ||
20 | #address-cells = <1>; | ||
21 | #size-cells = <1>; | ||
22 | |||
23 | cpus { | ||
24 | #address-cells = <1>; | ||
25 | #size-cells = <0>; | ||
26 | |||
27 | PowerPC,5200@0 { | ||
28 | device_type = "cpu"; | ||
29 | reg = <0>; | ||
30 | d-cache-line-size = <32>; | ||
31 | i-cache-line-size = <32>; | ||
32 | d-cache-size = <0x4000>; /* L1, 16K */ | ||
33 | i-cache-size = <0x4000>; /* L1, 16K */ | ||
34 | timebase-frequency = <0>; /* From Bootloader */ | ||
35 | bus-frequency = <0>; /* From Bootloader */ | ||
36 | clock-frequency = <0>; /* From Bootloader */ | ||
37 | }; | ||
38 | }; | ||
39 | |||
40 | memory { | ||
41 | device_type = "memory"; | ||
42 | reg = <0x00000000 0x04000000>; /* 64MB */ | ||
43 | }; | ||
44 | |||
45 | soc5200@f0000000 { | ||
46 | #address-cells = <1>; | ||
47 | #size-cells = <1>; | ||
48 | compatible = "fsl,mpc5200b-immr"; | ||
49 | ranges = <0x0 0xf0000000 0x0000c000>; | ||
50 | bus-frequency = <0>; /* From bootloader */ | ||
51 | system-frequency = <0>; /* From bootloader */ | ||
52 | |||
53 | cdm@200 { | ||
54 | compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm"; | ||
55 | reg = <0x200 0x38>; | ||
56 | }; | ||
57 | |||
58 | mpc5200_pic: interrupt-controller@500 { | ||
59 | /* 5200 interrupts are encoded into two levels; */ | ||
60 | interrupt-controller; | ||
61 | #interrupt-cells = <3>; | ||
62 | device_type = "interrupt-controller"; | ||
63 | compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic"; | ||
64 | reg = <0x500 0x80>; | ||
65 | }; | ||
66 | |||
67 | timer@600 { /* General Purpose Timer */ | ||
68 | compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; | ||
69 | cell-index = <0>; | ||
70 | reg = <0x600 0x10>; | ||
71 | interrupts = <0x1 0x9 0x0>; | ||
72 | interrupt-parent = <&mpc5200_pic>; | ||
73 | fsl,has-wdt; | ||
74 | }; | ||
75 | |||
76 | timer@610 { /* General Purpose Timer */ | ||
77 | compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; | ||
78 | cell-index = <1>; | ||
79 | reg = <0x610 0x10>; | ||
80 | interrupts = <0x1 0xa 0x0>; | ||
81 | interrupt-parent = <&mpc5200_pic>; | ||
82 | }; | ||
83 | |||
84 | gpt2: timer@620 { /* General Purpose Timer in GPIO mode */ | ||
85 | compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio"; | ||
86 | cell-index = <2>; | ||
87 | reg = <0x620 0x10>; | ||
88 | interrupts = <0x1 0xb 0x0>; | ||
89 | interrupt-parent = <&mpc5200_pic>; | ||
90 | gpio-controller; | ||
91 | #gpio-cells = <2>; | ||
92 | }; | ||
93 | |||
94 | gpt3: timer@630 { /* General Purpose Timer in GPIO mode */ | ||
95 | compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio"; | ||
96 | cell-index = <3>; | ||
97 | reg = <0x630 0x10>; | ||
98 | interrupts = <0x1 0xc 0x0>; | ||
99 | interrupt-parent = <&mpc5200_pic>; | ||
100 | gpio-controller; | ||
101 | #gpio-cells = <2>; | ||
102 | }; | ||
103 | |||
104 | gpt4: timer@640 { /* General Purpose Timer in GPIO mode */ | ||
105 | compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio"; | ||
106 | cell-index = <4>; | ||
107 | reg = <0x640 0x10>; | ||
108 | interrupts = <0x1 0xd 0x0>; | ||
109 | interrupt-parent = <&mpc5200_pic>; | ||
110 | gpio-controller; | ||
111 | #gpio-cells = <2>; | ||
112 | }; | ||
113 | |||
114 | gpt5: timer@650 { /* General Purpose Timer in GPIO mode */ | ||
115 | compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio"; | ||
116 | cell-index = <5>; | ||
117 | reg = <0x650 0x10>; | ||
118 | interrupts = <0x1 0xe 0x0>; | ||
119 | interrupt-parent = <&mpc5200_pic>; | ||
120 | gpio-controller; | ||
121 | #gpio-cells = <2>; | ||
122 | }; | ||
123 | |||
124 | gpt6: timer@660 { /* General Purpose Timer in GPIO mode */ | ||
125 | compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio"; | ||
126 | cell-index = <6>; | ||
127 | reg = <0x660 0x10>; | ||
128 | interrupts = <0x1 0xf 0x0>; | ||
129 | interrupt-parent = <&mpc5200_pic>; | ||
130 | gpio-controller; | ||
131 | #gpio-cells = <2>; | ||
132 | }; | ||
133 | |||
134 | gpt7: timer@670 { /* General Purpose Timer in GPIO mode */ | ||
135 | compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio"; | ||
136 | cell-index = <7>; | ||
137 | reg = <0x670 0x10>; | ||
138 | interrupts = <0x1 0x10 0x0>; | ||
139 | interrupt-parent = <&mpc5200_pic>; | ||
140 | gpio-controller; | ||
141 | #gpio-cells = <2>; | ||
142 | }; | ||
143 | |||
144 | rtc@800 { // Real time clock | ||
145 | compatible = "fsl,mpc5200b-rtc","fsl,mpc5200-rtc"; | ||
146 | device_type = "rtc"; | ||
147 | reg = <0x800 0x100>; | ||
148 | interrupts = <0x1 0x5 0x0 0x1 0x6 0x0>; | ||
149 | interrupt-parent = <&mpc5200_pic>; | ||
150 | }; | ||
151 | |||
152 | can@900 { | ||
153 | compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan"; | ||
154 | cell-index = <0>; | ||
155 | interrupts = <0x2 0x11 0x0>; | ||
156 | interrupt-parent = <&mpc5200_pic>; | ||
157 | reg = <0x900 0x80>; | ||
158 | }; | ||
159 | |||
160 | can@980 { | ||
161 | compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan"; | ||
162 | cell-index = <1>; | ||
163 | interrupts = <0x2 0x12 0x0>; | ||
164 | interrupt-parent = <&mpc5200_pic>; | ||
165 | reg = <0x980 0x80>; | ||
166 | }; | ||
167 | |||
168 | gpio_simple: gpio@b00 { | ||
169 | compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio"; | ||
170 | reg = <0xb00 0x40>; | ||
171 | interrupts = <0x1 0x7 0x0>; | ||
172 | interrupt-parent = <&mpc5200_pic>; | ||
173 | gpio-controller; | ||
174 | #gpio-cells = <2>; | ||
175 | }; | ||
176 | |||
177 | gpio_wkup: gpio-wkup@c00 { | ||
178 | compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup"; | ||
179 | reg = <0xc00 0x40>; | ||
180 | interrupts = <0x1 0x8 0x0 0x0 0x3 0x0>; | ||
181 | interrupt-parent = <&mpc5200_pic>; | ||
182 | gpio-controller; | ||
183 | #gpio-cells = <2>; | ||
184 | }; | ||
185 | |||
186 | spi@f00 { | ||
187 | compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi"; | ||
188 | reg = <0xf00 0x20>; | ||
189 | interrupts = <0x2 0xd 0x0 0x2 0xe 0x0>; | ||
190 | interrupt-parent = <&mpc5200_pic>; | ||
191 | }; | ||
192 | |||
193 | usb@1000 { | ||
194 | compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be"; | ||
195 | reg = <0x1000 0xff>; | ||
196 | interrupts = <0x2 0x6 0x0>; | ||
197 | interrupt-parent = <&mpc5200_pic>; | ||
198 | }; | ||
199 | |||
200 | dma-controller@1200 { | ||
201 | device_type = "dma-controller"; | ||
202 | compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm"; | ||
203 | reg = <0x1200 0x80>; | ||
204 | interrupts = <0x3 0x0 0x0 0x3 0x1 0x0 0x3 0x2 0x0 0x3 0x3 0x0 | ||
205 | 0x3 0x4 0x0 0x3 0x5 0x0 0x3 0x6 0x0 0x3 0x7 0x0 | ||
206 | 0x3 0x8 0x0 0x3 0x9 0x0 0x3 0xa 0x0 0x3 0xb 0x0 | ||
207 | 0x3 0xc 0x0 0x3 0xd 0x0 0x3 0xe 0x0 0x3 0xf 0x0>; | ||
208 | interrupt-parent = <&mpc5200_pic>; | ||
209 | }; | ||
210 | |||
211 | xlb@1f00 { | ||
212 | compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb"; | ||
213 | reg = <0x1f00 0x100>; | ||
214 | }; | ||
215 | |||
216 | ac97@2000 { /* PSC1 in ac97 mode */ | ||
217 | device_type = "sound"; | ||
218 | compatible = "mpc5200b-psc-ac97","fsl,mpc5200b-psc-ac97"; | ||
219 | cell-index = <0>; | ||
220 | reg = <0x2000 0x100>; | ||
221 | interrupts = <0x2 0x2 0x0>; | ||
222 | interrupt-parent = <&mpc5200_pic>; | ||
223 | }; | ||
224 | |||
225 | /* PSC2 port is used by CAN1/2 */ | ||
226 | |||
227 | serial@2400 { /* PSC3 in UART mode */ | ||
228 | device_type = "serial"; | ||
229 | compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; | ||
230 | port-number = <0>; | ||
231 | cell-index = <2>; | ||
232 | reg = <0x2400 0x100>; | ||
233 | interrupts = <0x2 0x3 0x0>; | ||
234 | interrupt-parent = <&mpc5200_pic>; | ||
235 | }; | ||
236 | |||
237 | /* PSC4 is ??? */ | ||
238 | |||
239 | /* PSC5 is ??? */ | ||
240 | |||
241 | serial@2c00 { /* PSC6 in UART mode */ | ||
242 | device_type = "serial"; | ||
243 | compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; | ||
244 | port-number = <1>; | ||
245 | cell-index = <5>; | ||
246 | reg = <0x2c00 0x100>; | ||
247 | interrupts = <0x2 0x4 0x0>; | ||
248 | interrupt-parent = <&mpc5200_pic>; | ||
249 | }; | ||
250 | |||
251 | ethernet@3000 { | ||
252 | device_type = "network"; | ||
253 | compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec"; | ||
254 | reg = <0x3000 0x400>; | ||
255 | local-mac-address = [00 00 00 00 00 00]; | ||
256 | interrupts = <0x2 0x5 0x0>; | ||
257 | interrupt-parent = <&mpc5200_pic>; | ||
258 | phy-handle = <&phy0>; | ||
259 | }; | ||
260 | |||
261 | mdio@3000 { | ||
262 | #address-cells = <1>; | ||
263 | #size-cells = <0>; | ||
264 | compatible = "fsl,mpc5200b-mdio", "fsl,mpc5200-mdio"; | ||
265 | reg = <0x3000 0x400>; /* fec range, since we need to setup fec interrupts */ | ||
266 | interrupts = <0x2 0x5 0x0>; /* these are for "mii command finished", not link changes & co. */ | ||
267 | interrupt-parent = <&mpc5200_pic>; | ||
268 | |||
269 | phy0:ethernet-phy@0 { | ||
270 | device_type = "ethernet-phy"; | ||
271 | reg = <0x0>; | ||
272 | }; | ||
273 | }; | ||
274 | |||
275 | ata@3a00 { | ||
276 | device_type = "ata"; | ||
277 | compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata"; | ||
278 | reg = <0x3a00 0x100>; | ||
279 | interrupts = <0x2 0x7 0x0>; | ||
280 | interrupt-parent = <&mpc5200_pic>; | ||
281 | }; | ||
282 | |||
283 | i2c@3d00 { | ||
284 | #address-cells = <1>; | ||
285 | #size-cells = <0>; | ||
286 | compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c"; | ||
287 | cell-index = <0>; | ||
288 | reg = <0x3d00 0x40>; | ||
289 | interrupts = <0x2 0xf 0x0>; | ||
290 | interrupt-parent = <&mpc5200_pic>; | ||
291 | fsl5200-clocking; | ||
292 | }; | ||
293 | |||
294 | i2c@3d40 { | ||
295 | #address-cells = <1>; | ||
296 | #size-cells = <0>; | ||
297 | compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c"; | ||
298 | cell-index = <1>; | ||
299 | reg = <0x3d40 0x40>; | ||
300 | interrupts = <0x2 0x10 0x0>; | ||
301 | interrupt-parent = <&mpc5200_pic>; | ||
302 | fsl5200-clocking; | ||
303 | rtc@51 { | ||
304 | device_type = "rtc"; | ||
305 | compatible = "nxp,pcf8563"; | ||
306 | reg = <0x51>; | ||
307 | }; | ||
308 | /* FIXME: EEPROM */ | ||
309 | }; | ||
310 | |||
311 | sram@8000 { | ||
312 | compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram","sram"; | ||
313 | reg = <0x8000 0x4000>; | ||
314 | }; | ||
315 | |||
316 | /* This is only an example device to show the usage of gpios. It maps all available | ||
317 | * gpios to the "gpio-provider" device. | ||
318 | */ | ||
319 | gpio { | ||
320 | compatible = "gpio-provider"; | ||
321 | |||
322 | /* mpc52xx exp.con patchfield */ | ||
323 | gpios = <&gpio_wkup 0 0 /* GPIO_WKUP_7 11d jp13-3 */ | ||
324 | &gpio_wkup 1 0 /* GPIO_WKUP_6 14c */ | ||
325 | &gpio_wkup 6 0 /* PSC2_4 43c x5-11 */ | ||
326 | &gpio_simple 2 0 /* IRDA_1 24c x7-6 set GPS_PORT_CONFIG[IRDA] = 0 */ | ||
327 | &gpio_simple 3 0 /* IRDA_0 x8-5 set GPS_PORT_CONFIG[IRDA] = 0 */ | ||
328 | &gpt2 0 0 /* timer2 12d x4-4 */ | ||
329 | &gpt3 0 0 /* timer3 13d x6-4 */ | ||
330 | &gpt4 0 0 /* timer4 61c x2-16 */ | ||
331 | &gpt5 0 0 /* timer5 44c x7-11 */ | ||
332 | &gpt6 0 0 /* timer6 60c x8-15 */ | ||
333 | &gpt7 0 0 /* timer7 36a x17-9 */ | ||
334 | >; | ||
335 | }; | ||
336 | }; | ||
337 | |||
338 | pci@f0000d00 { | ||
339 | #interrupt-cells = <1>; | ||
340 | #size-cells = <2>; | ||
341 | #address-cells = <3>; | ||
342 | device_type = "pci"; | ||
343 | compatible = "fsl,mpc5200b-pci","fsl,mpc5200-pci"; | ||
344 | reg = <0xf0000d00 0x100>; | ||
345 | interrupt-map-mask = <0xf800 0x0 0x0 0x7>; | ||
346 | interrupt-map = <0xc000 0x0 0x0 0x1 &mpc5200_pic 0x0 0x0 0x3 /* 1st slot */ | ||
347 | 0xc000 0x0 0x0 0x2 &mpc5200_pic 0x1 0x1 0x3 | ||
348 | 0xc000 0x0 0x0 0x3 &mpc5200_pic 0x1 0x2 0x3 | ||
349 | 0xc000 0x0 0x0 0x4 &mpc5200_pic 0x1 0x3 0x3 | ||
350 | |||
351 | 0xc800 0x0 0x0 0x1 &mpc5200_pic 0x1 0x1 0x3 /* 2nd slot */ | ||
352 | 0xc800 0x0 0x0 0x2 &mpc5200_pic 0x1 0x2 0x3 | ||
353 | 0xc800 0x0 0x0 0x3 &mpc5200_pic 0x1 0x3 0x3 | ||
354 | 0xc800 0x0 0x0 0x4 &mpc5200_pic 0x0 0x0 0x3>; | ||
355 | clock-frequency = <0>; // From boot loader | ||
356 | interrupts = <0x2 0x8 0x0 0x2 0x9 0x0 0x2 0xa 0x0>; | ||
357 | interrupt-parent = <&mpc5200_pic>; | ||
358 | bus-range = <0 0>; | ||
359 | ranges = <0x42000000 0x0 0x80000000 0x80000000 0x0 0x20000000 | ||
360 | 0x02000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000 | ||
361 | 0x01000000 0x0 0x00000000 0xb0000000 0x0 0x01000000>; | ||
362 | }; | ||
363 | }; | ||
diff --git a/arch/powerpc/configs/52xx/pcm030_defconfig b/arch/powerpc/configs/52xx/pcm030_defconfig new file mode 100644 index 000000000000..2c2c2bfeae77 --- /dev/null +++ b/arch/powerpc/configs/52xx/pcm030_defconfig | |||
@@ -0,0 +1,1109 @@ | |||
1 | # | ||
2 | # Automatically generated make config: don't edit | ||
3 | # Linux kernel version: 2.6.25 | ||
4 | # Fri Apr 25 14:46:54 2008 | ||
5 | # | ||
6 | # CONFIG_PPC64 is not set | ||
7 | |||
8 | # | ||
9 | # Processor support | ||
10 | # | ||
11 | CONFIG_6xx=y | ||
12 | # CONFIG_PPC_85xx is not set | ||
13 | # CONFIG_PPC_8xx is not set | ||
14 | # CONFIG_40x is not set | ||
15 | # CONFIG_44x is not set | ||
16 | # CONFIG_E200 is not set | ||
17 | CONFIG_PPC_FPU=y | ||
18 | # CONFIG_ALTIVEC is not set | ||
19 | CONFIG_PPC_STD_MMU=y | ||
20 | CONFIG_PPC_STD_MMU_32=y | ||
21 | # CONFIG_PPC_MM_SLICES is not set | ||
22 | # CONFIG_SMP is not set | ||
23 | CONFIG_PPC32=y | ||
24 | CONFIG_WORD_SIZE=32 | ||
25 | CONFIG_PPC_MERGE=y | ||
26 | CONFIG_MMU=y | ||
27 | CONFIG_GENERIC_CMOS_UPDATE=y | ||
28 | CONFIG_GENERIC_TIME=y | ||
29 | CONFIG_GENERIC_TIME_VSYSCALL=y | ||
30 | CONFIG_GENERIC_CLOCKEVENTS=y | ||
31 | CONFIG_GENERIC_HARDIRQS=y | ||
32 | # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set | ||
33 | CONFIG_IRQ_PER_CPU=y | ||
34 | CONFIG_STACKTRACE_SUPPORT=y | ||
35 | CONFIG_LOCKDEP_SUPPORT=y | ||
36 | CONFIG_RWSEM_XCHGADD_ALGORITHM=y | ||
37 | CONFIG_ARCH_HAS_ILOG2_U32=y | ||
38 | CONFIG_GENERIC_HWEIGHT=y | ||
39 | CONFIG_GENERIC_CALIBRATE_DELAY=y | ||
40 | CONFIG_GENERIC_FIND_NEXT_BIT=y | ||
41 | # CONFIG_ARCH_NO_VIRT_TO_BUS is not set | ||
42 | CONFIG_PPC=y | ||
43 | CONFIG_EARLY_PRINTK=y | ||
44 | CONFIG_GENERIC_NVRAM=y | ||
45 | CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y | ||
46 | CONFIG_ARCH_MAY_HAVE_PC_FDC=y | ||
47 | CONFIG_PPC_OF=y | ||
48 | CONFIG_OF=y | ||
49 | # CONFIG_PPC_UDBG_16550 is not set | ||
50 | # CONFIG_GENERIC_TBSYNC is not set | ||
51 | CONFIG_AUDIT_ARCH=y | ||
52 | CONFIG_GENERIC_BUG=y | ||
53 | CONFIG_DEFAULT_UIMAGE=y | ||
54 | # CONFIG_PPC_DCR_NATIVE is not set | ||
55 | # CONFIG_PPC_DCR_MMIO is not set | ||
56 | CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" | ||
57 | |||
58 | # | ||
59 | # General setup | ||
60 | # | ||
61 | CONFIG_EXPERIMENTAL=y | ||
62 | CONFIG_BROKEN_ON_SMP=y | ||
63 | CONFIG_LOCK_KERNEL=y | ||
64 | CONFIG_INIT_ENV_ARG_LIMIT=32 | ||
65 | CONFIG_LOCALVERSION="trunk" | ||
66 | # CONFIG_LOCALVERSION_AUTO is not set | ||
67 | # CONFIG_SWAP is not set | ||
68 | CONFIG_SYSVIPC=y | ||
69 | CONFIG_SYSVIPC_SYSCTL=y | ||
70 | CONFIG_POSIX_MQUEUE=y | ||
71 | # CONFIG_BSD_PROCESS_ACCT is not set | ||
72 | # CONFIG_TASKSTATS is not set | ||
73 | # CONFIG_AUDIT is not set | ||
74 | CONFIG_IKCONFIG=y | ||
75 | CONFIG_IKCONFIG_PROC=y | ||
76 | CONFIG_LOG_BUF_SHIFT=14 | ||
77 | # CONFIG_CGROUPS is not set | ||
78 | CONFIG_GROUP_SCHED=y | ||
79 | CONFIG_FAIR_GROUP_SCHED=y | ||
80 | # CONFIG_RT_GROUP_SCHED is not set | ||
81 | CONFIG_USER_SCHED=y | ||
82 | # CONFIG_CGROUP_SCHED is not set | ||
83 | CONFIG_SYSFS_DEPRECATED=y | ||
84 | CONFIG_SYSFS_DEPRECATED_V2=y | ||
85 | # CONFIG_RELAY is not set | ||
86 | # CONFIG_NAMESPACES is not set | ||
87 | # CONFIG_BLK_DEV_INITRD is not set | ||
88 | # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set | ||
89 | CONFIG_SYSCTL=y | ||
90 | CONFIG_EMBEDDED=y | ||
91 | # CONFIG_SYSCTL_SYSCALL is not set | ||
92 | CONFIG_KALLSYMS=y | ||
93 | # CONFIG_KALLSYMS_EXTRA_PASS is not set | ||
94 | CONFIG_HOTPLUG=y | ||
95 | CONFIG_PRINTK=y | ||
96 | CONFIG_BUG=y | ||
97 | CONFIG_ELF_CORE=y | ||
98 | CONFIG_COMPAT_BRK=y | ||
99 | CONFIG_BASE_FULL=y | ||
100 | CONFIG_FUTEX=y | ||
101 | CONFIG_ANON_INODES=y | ||
102 | CONFIG_EPOLL=y | ||
103 | CONFIG_SIGNALFD=y | ||
104 | CONFIG_TIMERFD=y | ||
105 | CONFIG_EVENTFD=y | ||
106 | CONFIG_SHMEM=y | ||
107 | # CONFIG_VM_EVENT_COUNTERS is not set | ||
108 | CONFIG_SLAB=y | ||
109 | # CONFIG_SLUB is not set | ||
110 | # CONFIG_SLOB is not set | ||
111 | # CONFIG_PROFILING is not set | ||
112 | # CONFIG_MARKERS is not set | ||
113 | CONFIG_HAVE_OPROFILE=y | ||
114 | # CONFIG_KPROBES is not set | ||
115 | CONFIG_HAVE_KPROBES=y | ||
116 | CONFIG_HAVE_KRETPROBES=y | ||
117 | CONFIG_PROC_PAGE_MONITOR=y | ||
118 | CONFIG_SLABINFO=y | ||
119 | CONFIG_RT_MUTEXES=y | ||
120 | # CONFIG_TINY_SHMEM is not set | ||
121 | CONFIG_BASE_SMALL=0 | ||
122 | CONFIG_MODULES=y | ||
123 | CONFIG_MODULE_UNLOAD=y | ||
124 | # CONFIG_MODULE_FORCE_UNLOAD is not set | ||
125 | # CONFIG_MODVERSIONS is not set | ||
126 | # CONFIG_MODULE_SRCVERSION_ALL is not set | ||
127 | # CONFIG_KMOD is not set | ||
128 | CONFIG_BLOCK=y | ||
129 | # CONFIG_LBD is not set | ||
130 | # CONFIG_BLK_DEV_IO_TRACE is not set | ||
131 | # CONFIG_LSF is not set | ||
132 | # CONFIG_BLK_DEV_BSG is not set | ||
133 | |||
134 | # | ||
135 | # IO Schedulers | ||
136 | # | ||
137 | CONFIG_IOSCHED_NOOP=y | ||
138 | # CONFIG_IOSCHED_AS is not set | ||
139 | # CONFIG_IOSCHED_DEADLINE is not set | ||
140 | # CONFIG_IOSCHED_CFQ is not set | ||
141 | # CONFIG_DEFAULT_AS is not set | ||
142 | # CONFIG_DEFAULT_DEADLINE is not set | ||
143 | # CONFIG_DEFAULT_CFQ is not set | ||
144 | CONFIG_DEFAULT_NOOP=y | ||
145 | CONFIG_DEFAULT_IOSCHED="noop" | ||
146 | CONFIG_CLASSIC_RCU=y | ||
147 | |||
148 | # | ||
149 | # Platform support | ||
150 | # | ||
151 | CONFIG_PPC_MULTIPLATFORM=y | ||
152 | # CONFIG_PPC_82xx is not set | ||
153 | # CONFIG_PPC_83xx is not set | ||
154 | # CONFIG_PPC_86xx is not set | ||
155 | CONFIG_CLASSIC32=y | ||
156 | # CONFIG_PPC_CHRP is not set | ||
157 | # CONFIG_PPC_MPC512x is not set | ||
158 | # CONFIG_PPC_MPC5121 is not set | ||
159 | # CONFIG_MPC5121_ADS is not set | ||
160 | CONFIG_PPC_MPC52xx=y | ||
161 | CONFIG_PPC_MPC5200_SIMPLE=y | ||
162 | # CONFIG_PPC_EFIKA is not set | ||
163 | # CONFIG_PPC_LITE5200 is not set | ||
164 | # CONFIG_PPC_MPC5200_BUGFIX is not set | ||
165 | # CONFIG_PPC_PMAC is not set | ||
166 | # CONFIG_PPC_CELL is not set | ||
167 | # CONFIG_PPC_CELL_NATIVE is not set | ||
168 | # CONFIG_PQ2ADS is not set | ||
169 | # CONFIG_EMBEDDED6xx is not set | ||
170 | # CONFIG_IPIC is not set | ||
171 | # CONFIG_MPIC is not set | ||
172 | # CONFIG_MPIC_WEIRD is not set | ||
173 | # CONFIG_PPC_I8259 is not set | ||
174 | # CONFIG_PPC_RTAS is not set | ||
175 | # CONFIG_MMIO_NVRAM is not set | ||
176 | # CONFIG_PPC_MPC106 is not set | ||
177 | # CONFIG_PPC_970_NAP is not set | ||
178 | # CONFIG_PPC_INDIRECT_IO is not set | ||
179 | # CONFIG_GENERIC_IOMAP is not set | ||
180 | # CONFIG_CPU_FREQ is not set | ||
181 | # CONFIG_TAU is not set | ||
182 | # CONFIG_FSL_ULI1575 is not set | ||
183 | CONFIG_PPC_BESTCOMM=y | ||
184 | CONFIG_PPC_BESTCOMM_ATA=y | ||
185 | CONFIG_PPC_BESTCOMM_FEC=y | ||
186 | CONFIG_PPC_BESTCOMM_GEN_BD=y | ||
187 | |||
188 | # | ||
189 | # Kernel options | ||
190 | # | ||
191 | # CONFIG_HIGHMEM is not set | ||
192 | CONFIG_TICK_ONESHOT=y | ||
193 | CONFIG_NO_HZ=y | ||
194 | CONFIG_HIGH_RES_TIMERS=y | ||
195 | CONFIG_GENERIC_CLOCKEVENTS_BUILD=y | ||
196 | CONFIG_HZ_100=y | ||
197 | # CONFIG_HZ_250 is not set | ||
198 | # CONFIG_HZ_300 is not set | ||
199 | # CONFIG_HZ_1000 is not set | ||
200 | CONFIG_HZ=100 | ||
201 | # CONFIG_SCHED_HRTICK is not set | ||
202 | # CONFIG_PREEMPT_NONE is not set | ||
203 | # CONFIG_PREEMPT_VOLUNTARY is not set | ||
204 | CONFIG_PREEMPT=y | ||
205 | # CONFIG_PREEMPT_RCU is not set | ||
206 | CONFIG_BINFMT_ELF=y | ||
207 | # CONFIG_BINFMT_MISC is not set | ||
208 | # CONFIG_IOMMU_HELPER is not set | ||
209 | CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y | ||
210 | CONFIG_ARCH_HAS_WALK_MEMORY=y | ||
211 | CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y | ||
212 | # CONFIG_KEXEC is not set | ||
213 | CONFIG_ARCH_FLATMEM_ENABLE=y | ||
214 | CONFIG_ARCH_POPULATES_NODE_MAP=y | ||
215 | CONFIG_SELECT_MEMORY_MODEL=y | ||
216 | CONFIG_FLATMEM_MANUAL=y | ||
217 | # CONFIG_DISCONTIGMEM_MANUAL is not set | ||
218 | # CONFIG_SPARSEMEM_MANUAL is not set | ||
219 | CONFIG_FLATMEM=y | ||
220 | CONFIG_FLAT_NODE_MEM_MAP=y | ||
221 | # CONFIG_SPARSEMEM_STATIC is not set | ||
222 | # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set | ||
223 | CONFIG_SPLIT_PTLOCK_CPUS=4 | ||
224 | # CONFIG_RESOURCES_64BIT is not set | ||
225 | CONFIG_ZONE_DMA_FLAG=1 | ||
226 | CONFIG_BOUNCE=y | ||
227 | CONFIG_VIRT_TO_BUS=y | ||
228 | CONFIG_FORCE_MAX_ZONEORDER=11 | ||
229 | CONFIG_PROC_DEVICETREE=y | ||
230 | # CONFIG_CMDLINE_BOOL is not set | ||
231 | # CONFIG_PM is not set | ||
232 | # CONFIG_SECCOMP is not set | ||
233 | CONFIG_ISA_DMA_API=y | ||
234 | |||
235 | # | ||
236 | # Bus options | ||
237 | # | ||
238 | CONFIG_ZONE_DMA=y | ||
239 | CONFIG_GENERIC_ISA_DMA=y | ||
240 | # CONFIG_PPC_INDIRECT_PCI is not set | ||
241 | CONFIG_FSL_SOC=y | ||
242 | CONFIG_PCI=y | ||
243 | CONFIG_PCI_DOMAINS=y | ||
244 | CONFIG_PCI_SYSCALL=y | ||
245 | # CONFIG_PCIEPORTBUS is not set | ||
246 | CONFIG_ARCH_SUPPORTS_MSI=y | ||
247 | # CONFIG_PCI_MSI is not set | ||
248 | CONFIG_PCI_LEGACY=y | ||
249 | # CONFIG_PCCARD is not set | ||
250 | # CONFIG_HOTPLUG_PCI is not set | ||
251 | |||
252 | # | ||
253 | # Advanced setup | ||
254 | # | ||
255 | # CONFIG_ADVANCED_OPTIONS is not set | ||
256 | |||
257 | # | ||
258 | # Default settings for advanced configuration options are used | ||
259 | # | ||
260 | CONFIG_HIGHMEM_START=0xfe000000 | ||
261 | CONFIG_LOWMEM_SIZE=0x30000000 | ||
262 | CONFIG_KERNEL_START=0xc0000000 | ||
263 | CONFIG_TASK_SIZE=0xc0000000 | ||
264 | |||
265 | # | ||
266 | # Networking | ||
267 | # | ||
268 | CONFIG_NET=y | ||
269 | |||
270 | # | ||
271 | # Networking options | ||
272 | # | ||
273 | CONFIG_PACKET=y | ||
274 | # CONFIG_PACKET_MMAP is not set | ||
275 | CONFIG_UNIX=y | ||
276 | # CONFIG_NET_KEY is not set | ||
277 | CONFIG_INET=y | ||
278 | CONFIG_IP_MULTICAST=y | ||
279 | # CONFIG_IP_ADVANCED_ROUTER is not set | ||
280 | CONFIG_IP_FIB_HASH=y | ||
281 | CONFIG_IP_PNP=y | ||
282 | CONFIG_IP_PNP_DHCP=y | ||
283 | CONFIG_IP_PNP_BOOTP=y | ||
284 | # CONFIG_IP_PNP_RARP is not set | ||
285 | # CONFIG_NET_IPIP is not set | ||
286 | # CONFIG_NET_IPGRE is not set | ||
287 | # CONFIG_IP_MROUTE is not set | ||
288 | # CONFIG_ARPD is not set | ||
289 | # CONFIG_SYN_COOKIES is not set | ||
290 | # CONFIG_INET_AH is not set | ||
291 | # CONFIG_INET_ESP is not set | ||
292 | # CONFIG_INET_IPCOMP is not set | ||
293 | # CONFIG_INET_XFRM_TUNNEL is not set | ||
294 | # CONFIG_INET_TUNNEL is not set | ||
295 | # CONFIG_INET_XFRM_MODE_TRANSPORT is not set | ||
296 | # CONFIG_INET_XFRM_MODE_TUNNEL is not set | ||
297 | # CONFIG_INET_XFRM_MODE_BEET is not set | ||
298 | # CONFIG_INET_LRO is not set | ||
299 | # CONFIG_INET_DIAG is not set | ||
300 | # CONFIG_TCP_CONG_ADVANCED is not set | ||
301 | CONFIG_TCP_CONG_CUBIC=y | ||
302 | CONFIG_DEFAULT_TCP_CONG="cubic" | ||
303 | # CONFIG_TCP_MD5SIG is not set | ||
304 | # CONFIG_IPV6 is not set | ||
305 | # CONFIG_NETWORK_SECMARK is not set | ||
306 | # CONFIG_NETFILTER is not set | ||
307 | # CONFIG_IP_DCCP is not set | ||
308 | # CONFIG_IP_SCTP is not set | ||
309 | # CONFIG_TIPC is not set | ||
310 | # CONFIG_ATM is not set | ||
311 | # CONFIG_BRIDGE is not set | ||
312 | # CONFIG_VLAN_8021Q is not set | ||
313 | # CONFIG_DECNET is not set | ||
314 | # CONFIG_LLC2 is not set | ||
315 | # CONFIG_IPX is not set | ||
316 | # CONFIG_ATALK is not set | ||
317 | # CONFIG_X25 is not set | ||
318 | # CONFIG_LAPB is not set | ||
319 | # CONFIG_ECONET is not set | ||
320 | # CONFIG_WAN_ROUTER is not set | ||
321 | # CONFIG_NET_SCHED is not set | ||
322 | |||
323 | # | ||
324 | # Network testing | ||
325 | # | ||
326 | # CONFIG_NET_PKTGEN is not set | ||
327 | # CONFIG_HAMRADIO is not set | ||
328 | # CONFIG_CAN is not set | ||
329 | # CONFIG_IRDA is not set | ||
330 | # CONFIG_BT is not set | ||
331 | # CONFIG_AF_RXRPC is not set | ||
332 | |||
333 | # | ||
334 | # Wireless | ||
335 | # | ||
336 | # CONFIG_CFG80211 is not set | ||
337 | # CONFIG_WIRELESS_EXT is not set | ||
338 | # CONFIG_MAC80211 is not set | ||
339 | # CONFIG_IEEE80211 is not set | ||
340 | # CONFIG_RFKILL is not set | ||
341 | # CONFIG_NET_9P is not set | ||
342 | |||
343 | # | ||
344 | # Device Drivers | ||
345 | # | ||
346 | |||
347 | # | ||
348 | # Generic Driver Options | ||
349 | # | ||
350 | CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" | ||
351 | CONFIG_STANDALONE=y | ||
352 | CONFIG_PREVENT_FIRMWARE_BUILD=y | ||
353 | # CONFIG_FW_LOADER is not set | ||
354 | # CONFIG_SYS_HYPERVISOR is not set | ||
355 | # CONFIG_CONNECTOR is not set | ||
356 | CONFIG_MTD=y | ||
357 | # CONFIG_MTD_DEBUG is not set | ||
358 | # CONFIG_MTD_CONCAT is not set | ||
359 | CONFIG_MTD_PARTITIONS=y | ||
360 | # CONFIG_MTD_REDBOOT_PARTS is not set | ||
361 | CONFIG_MTD_CMDLINE_PARTS=y | ||
362 | # CONFIG_MTD_OF_PARTS is not set | ||
363 | |||
364 | # | ||
365 | # User Modules And Translation Layers | ||
366 | # | ||
367 | CONFIG_MTD_CHAR=y | ||
368 | CONFIG_MTD_BLKDEVS=y | ||
369 | CONFIG_MTD_BLOCK=y | ||
370 | # CONFIG_FTL is not set | ||
371 | # CONFIG_NFTL is not set | ||
372 | # CONFIG_INFTL is not set | ||
373 | # CONFIG_RFD_FTL is not set | ||
374 | # CONFIG_SSFDC is not set | ||
375 | # CONFIG_MTD_OOPS is not set | ||
376 | |||
377 | # | ||
378 | # RAM/ROM/Flash chip drivers | ||
379 | # | ||
380 | CONFIG_MTD_CFI=y | ||
381 | # CONFIG_MTD_JEDECPROBE is not set | ||
382 | CONFIG_MTD_GEN_PROBE=y | ||
383 | # CONFIG_MTD_CFI_ADV_OPTIONS is not set | ||
384 | CONFIG_MTD_MAP_BANK_WIDTH_1=y | ||
385 | CONFIG_MTD_MAP_BANK_WIDTH_2=y | ||
386 | CONFIG_MTD_MAP_BANK_WIDTH_4=y | ||
387 | # CONFIG_MTD_MAP_BANK_WIDTH_8 is not set | ||
388 | # CONFIG_MTD_MAP_BANK_WIDTH_16 is not set | ||
389 | # CONFIG_MTD_MAP_BANK_WIDTH_32 is not set | ||
390 | CONFIG_MTD_CFI_I1=y | ||
391 | CONFIG_MTD_CFI_I2=y | ||
392 | # CONFIG_MTD_CFI_I4 is not set | ||
393 | # CONFIG_MTD_CFI_I8 is not set | ||
394 | CONFIG_MTD_CFI_INTELEXT=y | ||
395 | # CONFIG_MTD_CFI_AMDSTD is not set | ||
396 | # CONFIG_MTD_CFI_STAA is not set | ||
397 | CONFIG_MTD_CFI_UTIL=y | ||
398 | # CONFIG_MTD_RAM is not set | ||
399 | # CONFIG_MTD_ROM is not set | ||
400 | # CONFIG_MTD_ABSENT is not set | ||
401 | |||
402 | # | ||
403 | # Mapping drivers for chip access | ||
404 | # | ||
405 | # CONFIG_MTD_COMPLEX_MAPPINGS is not set | ||
406 | CONFIG_MTD_PHYSMAP=y | ||
407 | CONFIG_MTD_PHYSMAP_START=0x0 | ||
408 | CONFIG_MTD_PHYSMAP_LEN=0x0 | ||
409 | CONFIG_MTD_PHYSMAP_BANKWIDTH=1 | ||
410 | # CONFIG_MTD_PHYSMAP_OF is not set | ||
411 | # CONFIG_MTD_INTEL_VR_NOR is not set | ||
412 | # CONFIG_MTD_PLATRAM is not set | ||
413 | |||
414 | # | ||
415 | # Self-contained MTD device drivers | ||
416 | # | ||
417 | # CONFIG_MTD_PMC551 is not set | ||
418 | # CONFIG_MTD_SLRAM is not set | ||
419 | # CONFIG_MTD_PHRAM is not set | ||
420 | # CONFIG_MTD_MTDRAM is not set | ||
421 | # CONFIG_MTD_BLOCK2MTD is not set | ||
422 | |||
423 | # | ||
424 | # Disk-On-Chip Device Drivers | ||
425 | # | ||
426 | # CONFIG_MTD_DOC2000 is not set | ||
427 | # CONFIG_MTD_DOC2001 is not set | ||
428 | # CONFIG_MTD_DOC2001PLUS is not set | ||
429 | # CONFIG_MTD_NAND is not set | ||
430 | # CONFIG_MTD_ONENAND is not set | ||
431 | |||
432 | # | ||
433 | # UBI - Unsorted block images | ||
434 | # | ||
435 | # CONFIG_MTD_UBI is not set | ||
436 | CONFIG_OF_DEVICE=y | ||
437 | CONFIG_OF_I2C=y | ||
438 | # CONFIG_PARPORT is not set | ||
439 | # CONFIG_BLK_DEV is not set | ||
440 | # CONFIG_MISC_DEVICES is not set | ||
441 | CONFIG_HAVE_IDE=y | ||
442 | # CONFIG_IDE is not set | ||
443 | |||
444 | # | ||
445 | # SCSI device support | ||
446 | # | ||
447 | # CONFIG_RAID_ATTRS is not set | ||
448 | CONFIG_SCSI=m | ||
449 | CONFIG_SCSI_DMA=y | ||
450 | # CONFIG_SCSI_TGT is not set | ||
451 | # CONFIG_SCSI_NETLINK is not set | ||
452 | # CONFIG_SCSI_PROC_FS is not set | ||
453 | |||
454 | # | ||
455 | # SCSI support type (disk, tape, CD-ROM) | ||
456 | # | ||
457 | CONFIG_BLK_DEV_SD=m | ||
458 | # CONFIG_CHR_DEV_ST is not set | ||
459 | # CONFIG_CHR_DEV_OSST is not set | ||
460 | # CONFIG_BLK_DEV_SR is not set | ||
461 | # CONFIG_CHR_DEV_SG is not set | ||
462 | # CONFIG_CHR_DEV_SCH is not set | ||
463 | |||
464 | # | ||
465 | # Some SCSI devices (e.g. CD jukebox) support multiple LUNs | ||
466 | # | ||
467 | # CONFIG_SCSI_MULTI_LUN is not set | ||
468 | # CONFIG_SCSI_CONSTANTS is not set | ||
469 | # CONFIG_SCSI_LOGGING is not set | ||
470 | # CONFIG_SCSI_SCAN_ASYNC is not set | ||
471 | CONFIG_SCSI_WAIT_SCAN=m | ||
472 | |||
473 | # | ||
474 | # SCSI Transports | ||
475 | # | ||
476 | # CONFIG_SCSI_SPI_ATTRS is not set | ||
477 | # CONFIG_SCSI_FC_ATTRS is not set | ||
478 | # CONFIG_SCSI_ISCSI_ATTRS is not set | ||
479 | # CONFIG_SCSI_SAS_LIBSAS is not set | ||
480 | # CONFIG_SCSI_SRP_ATTRS is not set | ||
481 | # CONFIG_SCSI_LOWLEVEL is not set | ||
482 | CONFIG_ATA=m | ||
483 | # CONFIG_ATA_NONSTANDARD is not set | ||
484 | CONFIG_SATA_PMP=y | ||
485 | # CONFIG_SATA_AHCI is not set | ||
486 | # CONFIG_SATA_SIL24 is not set | ||
487 | # CONFIG_SATA_FSL is not set | ||
488 | CONFIG_ATA_SFF=y | ||
489 | # CONFIG_SATA_SVW is not set | ||
490 | # CONFIG_ATA_PIIX is not set | ||
491 | # CONFIG_SATA_MV is not set | ||
492 | # CONFIG_SATA_NV is not set | ||
493 | # CONFIG_PDC_ADMA is not set | ||
494 | # CONFIG_SATA_QSTOR is not set | ||
495 | # CONFIG_SATA_PROMISE is not set | ||
496 | # CONFIG_SATA_SX4 is not set | ||
497 | # CONFIG_SATA_SIL is not set | ||
498 | # CONFIG_SATA_SIS is not set | ||
499 | # CONFIG_SATA_ULI is not set | ||
500 | # CONFIG_SATA_VIA is not set | ||
501 | # CONFIG_SATA_VITESSE is not set | ||
502 | # CONFIG_SATA_INIC162X is not set | ||
503 | # CONFIG_PATA_ALI is not set | ||
504 | # CONFIG_PATA_AMD is not set | ||
505 | # CONFIG_PATA_ARTOP is not set | ||
506 | # CONFIG_PATA_ATIIXP is not set | ||
507 | # CONFIG_PATA_CMD640_PCI is not set | ||
508 | # CONFIG_PATA_CMD64X is not set | ||
509 | # CONFIG_PATA_CS5520 is not set | ||
510 | # CONFIG_PATA_CS5530 is not set | ||
511 | # CONFIG_PATA_CYPRESS is not set | ||
512 | # CONFIG_PATA_EFAR is not set | ||
513 | # CONFIG_ATA_GENERIC is not set | ||
514 | # CONFIG_PATA_HPT366 is not set | ||
515 | # CONFIG_PATA_HPT37X is not set | ||
516 | # CONFIG_PATA_HPT3X2N is not set | ||
517 | # CONFIG_PATA_HPT3X3 is not set | ||
518 | # CONFIG_PATA_IT821X is not set | ||
519 | # CONFIG_PATA_IT8213 is not set | ||
520 | # CONFIG_PATA_JMICRON is not set | ||
521 | # CONFIG_PATA_TRIFLEX is not set | ||
522 | # CONFIG_PATA_MARVELL is not set | ||
523 | CONFIG_PATA_MPC52xx=m | ||
524 | # CONFIG_PATA_MPIIX is not set | ||
525 | # CONFIG_PATA_OLDPIIX is not set | ||
526 | # CONFIG_PATA_NETCELL is not set | ||
527 | # CONFIG_PATA_NINJA32 is not set | ||
528 | # CONFIG_PATA_NS87410 is not set | ||
529 | # CONFIG_PATA_NS87415 is not set | ||
530 | # CONFIG_PATA_OPTI is not set | ||
531 | # CONFIG_PATA_OPTIDMA is not set | ||
532 | # CONFIG_PATA_PDC_OLD is not set | ||
533 | # CONFIG_PATA_RADISYS is not set | ||
534 | # CONFIG_PATA_RZ1000 is not set | ||
535 | # CONFIG_PATA_SC1200 is not set | ||
536 | # CONFIG_PATA_SERVERWORKS is not set | ||
537 | # CONFIG_PATA_PDC2027X is not set | ||
538 | # CONFIG_PATA_SIL680 is not set | ||
539 | # CONFIG_PATA_SIS is not set | ||
540 | # CONFIG_PATA_VIA is not set | ||
541 | # CONFIG_PATA_WINBOND is not set | ||
542 | # CONFIG_PATA_PLATFORM is not set | ||
543 | # CONFIG_MD is not set | ||
544 | # CONFIG_FUSION is not set | ||
545 | |||
546 | # | ||
547 | # IEEE 1394 (FireWire) support | ||
548 | # | ||
549 | # CONFIG_FIREWIRE is not set | ||
550 | # CONFIG_IEEE1394 is not set | ||
551 | # CONFIG_I2O is not set | ||
552 | # CONFIG_MACINTOSH_DRIVERS is not set | ||
553 | CONFIG_NETDEVICES=y | ||
554 | # CONFIG_NETDEVICES_MULTIQUEUE is not set | ||
555 | # CONFIG_DUMMY is not set | ||
556 | # CONFIG_BONDING is not set | ||
557 | # CONFIG_MACVLAN is not set | ||
558 | # CONFIG_EQUALIZER is not set | ||
559 | # CONFIG_TUN is not set | ||
560 | # CONFIG_VETH is not set | ||
561 | # CONFIG_ARCNET is not set | ||
562 | CONFIG_PHYLIB=y | ||
563 | |||
564 | # | ||
565 | # MII PHY device drivers | ||
566 | # | ||
567 | # CONFIG_MARVELL_PHY is not set | ||
568 | # CONFIG_DAVICOM_PHY is not set | ||
569 | # CONFIG_QSEMI_PHY is not set | ||
570 | # CONFIG_LXT_PHY is not set | ||
571 | # CONFIG_CICADA_PHY is not set | ||
572 | # CONFIG_VITESSE_PHY is not set | ||
573 | # CONFIG_SMSC_PHY is not set | ||
574 | # CONFIG_BROADCOM_PHY is not set | ||
575 | # CONFIG_ICPLUS_PHY is not set | ||
576 | # CONFIG_REALTEK_PHY is not set | ||
577 | # CONFIG_FIXED_PHY is not set | ||
578 | # CONFIG_MDIO_BITBANG is not set | ||
579 | CONFIG_NET_ETHERNET=y | ||
580 | CONFIG_MII=y | ||
581 | # CONFIG_HAPPYMEAL is not set | ||
582 | # CONFIG_SUNGEM is not set | ||
583 | # CONFIG_CASSINI is not set | ||
584 | # CONFIG_NET_VENDOR_3COM is not set | ||
585 | # CONFIG_NET_TULIP is not set | ||
586 | # CONFIG_HP100 is not set | ||
587 | # CONFIG_IBM_NEW_EMAC_ZMII is not set | ||
588 | # CONFIG_IBM_NEW_EMAC_RGMII is not set | ||
589 | # CONFIG_IBM_NEW_EMAC_TAH is not set | ||
590 | # CONFIG_IBM_NEW_EMAC_EMAC4 is not set | ||
591 | # CONFIG_NET_PCI is not set | ||
592 | # CONFIG_B44 is not set | ||
593 | CONFIG_FEC_MPC52xx=y | ||
594 | CONFIG_FEC_MPC52xx_MDIO=y | ||
595 | # CONFIG_NETDEV_1000 is not set | ||
596 | # CONFIG_NETDEV_10000 is not set | ||
597 | # CONFIG_TR is not set | ||
598 | |||
599 | # | ||
600 | # Wireless LAN | ||
601 | # | ||
602 | # CONFIG_WLAN_PRE80211 is not set | ||
603 | # CONFIG_WLAN_80211 is not set | ||
604 | # CONFIG_IWLWIFI_LEDS is not set | ||
605 | |||
606 | # | ||
607 | # USB Network Adapters | ||
608 | # | ||
609 | # CONFIG_USB_CATC is not set | ||
610 | # CONFIG_USB_KAWETH is not set | ||
611 | # CONFIG_USB_PEGASUS is not set | ||
612 | # CONFIG_USB_RTL8150 is not set | ||
613 | # CONFIG_USB_USBNET is not set | ||
614 | # CONFIG_WAN is not set | ||
615 | # CONFIG_FDDI is not set | ||
616 | # CONFIG_HIPPI is not set | ||
617 | # CONFIG_PPP is not set | ||
618 | # CONFIG_SLIP is not set | ||
619 | # CONFIG_NET_FC is not set | ||
620 | # CONFIG_NETCONSOLE is not set | ||
621 | # CONFIG_NETPOLL is not set | ||
622 | # CONFIG_NET_POLL_CONTROLLER is not set | ||
623 | # CONFIG_ISDN is not set | ||
624 | # CONFIG_PHONE is not set | ||
625 | |||
626 | # | ||
627 | # Input device support | ||
628 | # | ||
629 | # CONFIG_INPUT is not set | ||
630 | |||
631 | # | ||
632 | # Hardware I/O ports | ||
633 | # | ||
634 | # CONFIG_SERIO is not set | ||
635 | # CONFIG_GAMEPORT is not set | ||
636 | |||
637 | # | ||
638 | # Character devices | ||
639 | # | ||
640 | # CONFIG_VT is not set | ||
641 | # CONFIG_SERIAL_NONSTANDARD is not set | ||
642 | # CONFIG_NOZOMI is not set | ||
643 | |||
644 | # | ||
645 | # Serial drivers | ||
646 | # | ||
647 | # CONFIG_SERIAL_8250 is not set | ||
648 | |||
649 | # | ||
650 | # Non-8250 serial port support | ||
651 | # | ||
652 | # CONFIG_SERIAL_UARTLITE is not set | ||
653 | CONFIG_SERIAL_CORE=y | ||
654 | CONFIG_SERIAL_CORE_CONSOLE=y | ||
655 | CONFIG_SERIAL_MPC52xx=y | ||
656 | CONFIG_SERIAL_MPC52xx_CONSOLE=y | ||
657 | CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=9600 | ||
658 | # CONFIG_SERIAL_JSM is not set | ||
659 | CONFIG_UNIX98_PTYS=y | ||
660 | # CONFIG_LEGACY_PTYS is not set | ||
661 | # CONFIG_IPMI_HANDLER is not set | ||
662 | CONFIG_HW_RANDOM=y | ||
663 | # CONFIG_NVRAM is not set | ||
664 | # CONFIG_GEN_RTC is not set | ||
665 | # CONFIG_R3964 is not set | ||
666 | # CONFIG_APPLICOM is not set | ||
667 | # CONFIG_RAW_DRIVER is not set | ||
668 | # CONFIG_TCG_TPM is not set | ||
669 | CONFIG_DEVPORT=y | ||
670 | CONFIG_I2C=y | ||
671 | CONFIG_I2C_BOARDINFO=y | ||
672 | CONFIG_I2C_CHARDEV=y | ||
673 | |||
674 | # | ||
675 | # I2C Hardware Bus support | ||
676 | # | ||
677 | # CONFIG_I2C_ALI1535 is not set | ||
678 | # CONFIG_I2C_ALI1563 is not set | ||
679 | # CONFIG_I2C_ALI15X3 is not set | ||
680 | # CONFIG_I2C_AMD756 is not set | ||
681 | # CONFIG_I2C_AMD8111 is not set | ||
682 | # CONFIG_I2C_I801 is not set | ||
683 | # CONFIG_I2C_I810 is not set | ||
684 | # CONFIG_I2C_PIIX4 is not set | ||
685 | CONFIG_I2C_MPC=y | ||
686 | # CONFIG_I2C_NFORCE2 is not set | ||
687 | # CONFIG_I2C_OCORES is not set | ||
688 | # CONFIG_I2C_PARPORT_LIGHT is not set | ||
689 | # CONFIG_I2C_PROSAVAGE is not set | ||
690 | # CONFIG_I2C_SAVAGE4 is not set | ||
691 | # CONFIG_I2C_SIMTEC is not set | ||
692 | # CONFIG_I2C_SIS5595 is not set | ||
693 | # CONFIG_I2C_SIS630 is not set | ||
694 | # CONFIG_I2C_SIS96X is not set | ||
695 | # CONFIG_I2C_TAOS_EVM is not set | ||
696 | # CONFIG_I2C_STUB is not set | ||
697 | # CONFIG_I2C_TINY_USB is not set | ||
698 | # CONFIG_I2C_VIA is not set | ||
699 | # CONFIG_I2C_VIAPRO is not set | ||
700 | # CONFIG_I2C_VOODOO3 is not set | ||
701 | # CONFIG_I2C_PCA_PLATFORM is not set | ||
702 | |||
703 | # | ||
704 | # Miscellaneous I2C Chip support | ||
705 | # | ||
706 | # CONFIG_DS1682 is not set | ||
707 | CONFIG_SENSORS_EEPROM=m | ||
708 | # CONFIG_SENSORS_PCF8574 is not set | ||
709 | # CONFIG_PCF8575 is not set | ||
710 | # CONFIG_SENSORS_PCF8591 is not set | ||
711 | # CONFIG_SENSORS_MAX6875 is not set | ||
712 | # CONFIG_SENSORS_TSL2550 is not set | ||
713 | # CONFIG_I2C_DEBUG_CORE is not set | ||
714 | # CONFIG_I2C_DEBUG_ALGO is not set | ||
715 | # CONFIG_I2C_DEBUG_BUS is not set | ||
716 | # CONFIG_I2C_DEBUG_CHIP is not set | ||
717 | |||
718 | # | ||
719 | # SPI support | ||
720 | # | ||
721 | # CONFIG_SPI is not set | ||
722 | # CONFIG_SPI_MASTER is not set | ||
723 | # CONFIG_W1 is not set | ||
724 | # CONFIG_POWER_SUPPLY is not set | ||
725 | # CONFIG_HWMON is not set | ||
726 | # CONFIG_THERMAL is not set | ||
727 | # CONFIG_WATCHDOG is not set | ||
728 | |||
729 | # | ||
730 | # Sonics Silicon Backplane | ||
731 | # | ||
732 | CONFIG_SSB_POSSIBLE=y | ||
733 | # CONFIG_SSB is not set | ||
734 | |||
735 | # | ||
736 | # Multifunction device drivers | ||
737 | # | ||
738 | # CONFIG_MFD_SM501 is not set | ||
739 | # CONFIG_HTC_PASIC3 is not set | ||
740 | |||
741 | # | ||
742 | # Multimedia devices | ||
743 | # | ||
744 | # CONFIG_VIDEO_DEV is not set | ||
745 | # CONFIG_DVB_CORE is not set | ||
746 | # CONFIG_DAB is not set | ||
747 | |||
748 | # | ||
749 | # Graphics support | ||
750 | # | ||
751 | # CONFIG_AGP is not set | ||
752 | # CONFIG_DRM is not set | ||
753 | # CONFIG_VGASTATE is not set | ||
754 | # CONFIG_VIDEO_OUTPUT_CONTROL is not set | ||
755 | # CONFIG_FB is not set | ||
756 | # CONFIG_BACKLIGHT_LCD_SUPPORT is not set | ||
757 | |||
758 | # | ||
759 | # Display device support | ||
760 | # | ||
761 | # CONFIG_DISPLAY_SUPPORT is not set | ||
762 | |||
763 | # | ||
764 | # Sound | ||
765 | # | ||
766 | # CONFIG_SOUND is not set | ||
767 | CONFIG_USB_SUPPORT=y | ||
768 | CONFIG_USB_ARCH_HAS_HCD=y | ||
769 | CONFIG_USB_ARCH_HAS_OHCI=y | ||
770 | CONFIG_USB_ARCH_HAS_EHCI=y | ||
771 | CONFIG_USB=y | ||
772 | # CONFIG_USB_DEBUG is not set | ||
773 | # CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set | ||
774 | |||
775 | # | ||
776 | # Miscellaneous USB options | ||
777 | # | ||
778 | CONFIG_USB_DEVICEFS=y | ||
779 | # CONFIG_USB_DEVICE_CLASS is not set | ||
780 | # CONFIG_USB_DYNAMIC_MINORS is not set | ||
781 | # CONFIG_USB_OTG is not set | ||
782 | |||
783 | # | ||
784 | # USB Host Controller Drivers | ||
785 | # | ||
786 | # CONFIG_USB_EHCI_HCD is not set | ||
787 | # CONFIG_USB_ISP116X_HCD is not set | ||
788 | CONFIG_USB_OHCI_HCD=m | ||
789 | # CONFIG_USB_OHCI_HCD_PPC_SOC is not set | ||
790 | CONFIG_USB_OHCI_HCD_PPC_OF=y | ||
791 | CONFIG_USB_OHCI_HCD_PPC_OF_BE=y | ||
792 | # CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set | ||
793 | # CONFIG_USB_OHCI_HCD_PCI is not set | ||
794 | CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y | ||
795 | CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y | ||
796 | # CONFIG_USB_OHCI_LITTLE_ENDIAN is not set | ||
797 | # CONFIG_USB_UHCI_HCD is not set | ||
798 | # CONFIG_USB_SL811_HCD is not set | ||
799 | # CONFIG_USB_R8A66597_HCD is not set | ||
800 | |||
801 | # | ||
802 | # USB Device Class drivers | ||
803 | # | ||
804 | # CONFIG_USB_ACM is not set | ||
805 | # CONFIG_USB_PRINTER is not set | ||
806 | |||
807 | # | ||
808 | # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' | ||
809 | # | ||
810 | |||
811 | # | ||
812 | # may also be needed; see USB_STORAGE Help for more information | ||
813 | # | ||
814 | CONFIG_USB_STORAGE=m | ||
815 | # CONFIG_USB_STORAGE_DEBUG is not set | ||
816 | # CONFIG_USB_STORAGE_DATAFAB is not set | ||
817 | # CONFIG_USB_STORAGE_FREECOM is not set | ||
818 | # CONFIG_USB_STORAGE_ISD200 is not set | ||
819 | # CONFIG_USB_STORAGE_DPCM is not set | ||
820 | # CONFIG_USB_STORAGE_USBAT is not set | ||
821 | # CONFIG_USB_STORAGE_SDDR09 is not set | ||
822 | # CONFIG_USB_STORAGE_SDDR55 is not set | ||
823 | # CONFIG_USB_STORAGE_JUMPSHOT is not set | ||
824 | # CONFIG_USB_STORAGE_ALAUDA is not set | ||
825 | # CONFIG_USB_STORAGE_KARMA is not set | ||
826 | # CONFIG_USB_LIBUSUAL is not set | ||
827 | |||
828 | # | ||
829 | # USB Imaging devices | ||
830 | # | ||
831 | # CONFIG_USB_MDC800 is not set | ||
832 | # CONFIG_USB_MICROTEK is not set | ||
833 | # CONFIG_USB_MON is not set | ||
834 | |||
835 | # | ||
836 | # USB port drivers | ||
837 | # | ||
838 | # CONFIG_USB_SERIAL is not set | ||
839 | |||
840 | # | ||
841 | # USB Miscellaneous drivers | ||
842 | # | ||
843 | # CONFIG_USB_EMI62 is not set | ||
844 | # CONFIG_USB_EMI26 is not set | ||
845 | # CONFIG_USB_ADUTUX is not set | ||
846 | # CONFIG_USB_AUERSWALD is not set | ||
847 | # CONFIG_USB_RIO500 is not set | ||
848 | # CONFIG_USB_LEGOTOWER is not set | ||
849 | # CONFIG_USB_LCD is not set | ||
850 | # CONFIG_USB_BERRY_CHARGE is not set | ||
851 | # CONFIG_USB_LED is not set | ||
852 | # CONFIG_USB_CYPRESS_CY7C63 is not set | ||
853 | # CONFIG_USB_CYTHERM is not set | ||
854 | # CONFIG_USB_PHIDGET is not set | ||
855 | # CONFIG_USB_IDMOUSE is not set | ||
856 | # CONFIG_USB_FTDI_ELAN is not set | ||
857 | # CONFIG_USB_APPLEDISPLAY is not set | ||
858 | # CONFIG_USB_LD is not set | ||
859 | # CONFIG_USB_TRANCEVIBRATOR is not set | ||
860 | # CONFIG_USB_IOWARRIOR is not set | ||
861 | # CONFIG_USB_TEST is not set | ||
862 | # CONFIG_USB_GADGET is not set | ||
863 | # CONFIG_MMC is not set | ||
864 | # CONFIG_MEMSTICK is not set | ||
865 | # CONFIG_NEW_LEDS is not set | ||
866 | # CONFIG_INFINIBAND is not set | ||
867 | # CONFIG_EDAC is not set | ||
868 | CONFIG_RTC_LIB=m | ||
869 | CONFIG_RTC_CLASS=m | ||
870 | |||
871 | # | ||
872 | # RTC interfaces | ||
873 | # | ||
874 | CONFIG_RTC_INTF_SYSFS=y | ||
875 | CONFIG_RTC_INTF_PROC=y | ||
876 | CONFIG_RTC_INTF_DEV=y | ||
877 | # CONFIG_RTC_INTF_DEV_UIE_EMUL is not set | ||
878 | # CONFIG_RTC_DRV_TEST is not set | ||
879 | |||
880 | # | ||
881 | # I2C RTC drivers | ||
882 | # | ||
883 | # CONFIG_RTC_DRV_DS1307 is not set | ||
884 | # CONFIG_RTC_DRV_DS1374 is not set | ||
885 | # CONFIG_RTC_DRV_DS1672 is not set | ||
886 | # CONFIG_RTC_DRV_MAX6900 is not set | ||
887 | # CONFIG_RTC_DRV_RS5C372 is not set | ||
888 | # CONFIG_RTC_DRV_ISL1208 is not set | ||
889 | # CONFIG_RTC_DRV_X1205 is not set | ||
890 | CONFIG_RTC_DRV_PCF8563=m | ||
891 | # CONFIG_RTC_DRV_PCF8583 is not set | ||
892 | # CONFIG_RTC_DRV_M41T80 is not set | ||
893 | # CONFIG_RTC_DRV_S35390A is not set | ||
894 | |||
895 | # | ||
896 | # SPI RTC drivers | ||
897 | # | ||
898 | |||
899 | # | ||
900 | # Platform RTC drivers | ||
901 | # | ||
902 | # CONFIG_RTC_DRV_CMOS is not set | ||
903 | # CONFIG_RTC_DRV_DS1511 is not set | ||
904 | # CONFIG_RTC_DRV_DS1553 is not set | ||
905 | # CONFIG_RTC_DRV_DS1742 is not set | ||
906 | # CONFIG_RTC_DRV_STK17TA8 is not set | ||
907 | # CONFIG_RTC_DRV_M48T86 is not set | ||
908 | # CONFIG_RTC_DRV_M48T59 is not set | ||
909 | # CONFIG_RTC_DRV_V3020 is not set | ||
910 | |||
911 | # | ||
912 | # on-CPU RTC drivers | ||
913 | # | ||
914 | # CONFIG_DMADEVICES is not set | ||
915 | # CONFIG_UIO is not set | ||
916 | |||
917 | # | ||
918 | # File systems | ||
919 | # | ||
920 | CONFIG_EXT2_FS=m | ||
921 | # CONFIG_EXT2_FS_XATTR is not set | ||
922 | # CONFIG_EXT2_FS_XIP is not set | ||
923 | CONFIG_EXT3_FS=m | ||
924 | CONFIG_EXT3_FS_XATTR=y | ||
925 | # CONFIG_EXT3_FS_POSIX_ACL is not set | ||
926 | # CONFIG_EXT3_FS_SECURITY is not set | ||
927 | # CONFIG_EXT4DEV_FS is not set | ||
928 | CONFIG_JBD=m | ||
929 | CONFIG_FS_MBCACHE=m | ||
930 | # CONFIG_REISERFS_FS is not set | ||
931 | # CONFIG_JFS_FS is not set | ||
932 | # CONFIG_FS_POSIX_ACL is not set | ||
933 | # CONFIG_XFS_FS is not set | ||
934 | # CONFIG_OCFS2_FS is not set | ||
935 | # CONFIG_DNOTIFY is not set | ||
936 | # CONFIG_INOTIFY is not set | ||
937 | # CONFIG_QUOTA is not set | ||
938 | # CONFIG_AUTOFS_FS is not set | ||
939 | # CONFIG_AUTOFS4_FS is not set | ||
940 | # CONFIG_FUSE_FS is not set | ||
941 | |||
942 | # | ||
943 | # CD-ROM/DVD Filesystems | ||
944 | # | ||
945 | # CONFIG_ISO9660_FS is not set | ||
946 | # CONFIG_UDF_FS is not set | ||
947 | |||
948 | # | ||
949 | # DOS/FAT/NT Filesystems | ||
950 | # | ||
951 | CONFIG_FAT_FS=m | ||
952 | # CONFIG_MSDOS_FS is not set | ||
953 | CONFIG_VFAT_FS=m | ||
954 | CONFIG_FAT_DEFAULT_CODEPAGE=850 | ||
955 | CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" | ||
956 | # CONFIG_NTFS_FS is not set | ||
957 | |||
958 | # | ||
959 | # Pseudo filesystems | ||
960 | # | ||
961 | CONFIG_PROC_FS=y | ||
962 | # CONFIG_PROC_KCORE is not set | ||
963 | CONFIG_PROC_SYSCTL=y | ||
964 | CONFIG_SYSFS=y | ||
965 | CONFIG_TMPFS=y | ||
966 | # CONFIG_TMPFS_POSIX_ACL is not set | ||
967 | # CONFIG_HUGETLB_PAGE is not set | ||
968 | # CONFIG_CONFIGFS_FS is not set | ||
969 | |||
970 | # | ||
971 | # Miscellaneous filesystems | ||
972 | # | ||
973 | # CONFIG_ADFS_FS is not set | ||
974 | # CONFIG_AFFS_FS is not set | ||
975 | # CONFIG_HFS_FS is not set | ||
976 | # CONFIG_HFSPLUS_FS is not set | ||
977 | # CONFIG_BEFS_FS is not set | ||
978 | # CONFIG_BFS_FS is not set | ||
979 | # CONFIG_EFS_FS is not set | ||
980 | CONFIG_JFFS2_FS=y | ||
981 | CONFIG_JFFS2_FS_DEBUG=0 | ||
982 | CONFIG_JFFS2_FS_WRITEBUFFER=y | ||
983 | # CONFIG_JFFS2_FS_WBUF_VERIFY is not set | ||
984 | # CONFIG_JFFS2_SUMMARY is not set | ||
985 | # CONFIG_JFFS2_FS_XATTR is not set | ||
986 | # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set | ||
987 | CONFIG_JFFS2_ZLIB=y | ||
988 | # CONFIG_JFFS2_LZO is not set | ||
989 | CONFIG_JFFS2_RTIME=y | ||
990 | # CONFIG_JFFS2_RUBIN is not set | ||
991 | # CONFIG_CRAMFS is not set | ||
992 | # CONFIG_VXFS_FS is not set | ||
993 | # CONFIG_MINIX_FS is not set | ||
994 | # CONFIG_HPFS_FS is not set | ||
995 | # CONFIG_QNX4FS_FS is not set | ||
996 | # CONFIG_ROMFS_FS is not set | ||
997 | # CONFIG_SYSV_FS is not set | ||
998 | # CONFIG_UFS_FS is not set | ||
999 | CONFIG_NETWORK_FILESYSTEMS=y | ||
1000 | CONFIG_NFS_FS=y | ||
1001 | CONFIG_NFS_V3=y | ||
1002 | # CONFIG_NFS_V3_ACL is not set | ||
1003 | # CONFIG_NFS_V4 is not set | ||
1004 | # CONFIG_NFS_DIRECTIO is not set | ||
1005 | # CONFIG_NFSD is not set | ||
1006 | CONFIG_ROOT_NFS=y | ||
1007 | CONFIG_LOCKD=y | ||
1008 | CONFIG_LOCKD_V4=y | ||
1009 | CONFIG_NFS_COMMON=y | ||
1010 | CONFIG_SUNRPC=y | ||
1011 | # CONFIG_SUNRPC_BIND34 is not set | ||
1012 | # CONFIG_RPCSEC_GSS_KRB5 is not set | ||
1013 | # CONFIG_RPCSEC_GSS_SPKM3 is not set | ||
1014 | # CONFIG_SMB_FS is not set | ||
1015 | # CONFIG_CIFS is not set | ||
1016 | # CONFIG_NCP_FS is not set | ||
1017 | # CONFIG_CODA_FS is not set | ||
1018 | # CONFIG_AFS_FS is not set | ||
1019 | |||
1020 | # | ||
1021 | # Partition Types | ||
1022 | # | ||
1023 | # CONFIG_PARTITION_ADVANCED is not set | ||
1024 | CONFIG_MSDOS_PARTITION=y | ||
1025 | CONFIG_NLS=y | ||
1026 | CONFIG_NLS_DEFAULT="iso8859-1" | ||
1027 | # CONFIG_NLS_CODEPAGE_437 is not set | ||
1028 | # CONFIG_NLS_CODEPAGE_737 is not set | ||
1029 | # CONFIG_NLS_CODEPAGE_775 is not set | ||
1030 | CONFIG_NLS_CODEPAGE_850=y | ||
1031 | # CONFIG_NLS_CODEPAGE_852 is not set | ||
1032 | # CONFIG_NLS_CODEPAGE_855 is not set | ||
1033 | # CONFIG_NLS_CODEPAGE_857 is not set | ||
1034 | # CONFIG_NLS_CODEPAGE_860 is not set | ||
1035 | # CONFIG_NLS_CODEPAGE_861 is not set | ||
1036 | # CONFIG_NLS_CODEPAGE_862 is not set | ||
1037 | # CONFIG_NLS_CODEPAGE_863 is not set | ||
1038 | # CONFIG_NLS_CODEPAGE_864 is not set | ||
1039 | # CONFIG_NLS_CODEPAGE_865 is not set | ||
1040 | # CONFIG_NLS_CODEPAGE_866 is not set | ||
1041 | # CONFIG_NLS_CODEPAGE_869 is not set | ||
1042 | # CONFIG_NLS_CODEPAGE_936 is not set | ||
1043 | # CONFIG_NLS_CODEPAGE_950 is not set | ||
1044 | # CONFIG_NLS_CODEPAGE_932 is not set | ||
1045 | # CONFIG_NLS_CODEPAGE_949 is not set | ||
1046 | # CONFIG_NLS_CODEPAGE_874 is not set | ||
1047 | # CONFIG_NLS_ISO8859_8 is not set | ||
1048 | # CONFIG_NLS_CODEPAGE_1250 is not set | ||
1049 | # CONFIG_NLS_CODEPAGE_1251 is not set | ||
1050 | # CONFIG_NLS_ASCII is not set | ||
1051 | CONFIG_NLS_ISO8859_1=y | ||
1052 | # CONFIG_NLS_ISO8859_2 is not set | ||
1053 | # CONFIG_NLS_ISO8859_3 is not set | ||
1054 | # CONFIG_NLS_ISO8859_4 is not set | ||
1055 | # CONFIG_NLS_ISO8859_5 is not set | ||
1056 | # CONFIG_NLS_ISO8859_6 is not set | ||
1057 | # CONFIG_NLS_ISO8859_7 is not set | ||
1058 | # CONFIG_NLS_ISO8859_9 is not set | ||
1059 | # CONFIG_NLS_ISO8859_13 is not set | ||
1060 | # CONFIG_NLS_ISO8859_14 is not set | ||
1061 | # CONFIG_NLS_ISO8859_15 is not set | ||
1062 | # CONFIG_NLS_KOI8_R is not set | ||
1063 | # CONFIG_NLS_KOI8_U is not set | ||
1064 | # CONFIG_NLS_UTF8 is not set | ||
1065 | # CONFIG_DLM is not set | ||
1066 | |||
1067 | # | ||
1068 | # Library routines | ||
1069 | # | ||
1070 | CONFIG_BITREVERSE=y | ||
1071 | # CONFIG_CRC_CCITT is not set | ||
1072 | # CONFIG_CRC16 is not set | ||
1073 | # CONFIG_CRC_ITU_T is not set | ||
1074 | CONFIG_CRC32=y | ||
1075 | # CONFIG_CRC7 is not set | ||
1076 | # CONFIG_LIBCRC32C is not set | ||
1077 | CONFIG_ZLIB_INFLATE=y | ||
1078 | CONFIG_ZLIB_DEFLATE=y | ||
1079 | CONFIG_PLIST=y | ||
1080 | CONFIG_HAS_IOMEM=y | ||
1081 | CONFIG_HAS_IOPORT=y | ||
1082 | CONFIG_HAS_DMA=y | ||
1083 | CONFIG_HAVE_LMB=y | ||
1084 | |||
1085 | # | ||
1086 | # Kernel hacking | ||
1087 | # | ||
1088 | # CONFIG_PRINTK_TIME is not set | ||
1089 | CONFIG_ENABLE_WARN_DEPRECATED=y | ||
1090 | CONFIG_ENABLE_MUST_CHECK=y | ||
1091 | # CONFIG_MAGIC_SYSRQ is not set | ||
1092 | # CONFIG_UNUSED_SYMBOLS is not set | ||
1093 | # CONFIG_DEBUG_FS is not set | ||
1094 | # CONFIG_HEADERS_CHECK is not set | ||
1095 | # CONFIG_DEBUG_KERNEL is not set | ||
1096 | # CONFIG_DEBUG_BUGVERBOSE is not set | ||
1097 | # CONFIG_SAMPLES is not set | ||
1098 | # CONFIG_BOOTX_TEXT is not set | ||
1099 | # CONFIG_PPC_EARLY_DEBUG is not set | ||
1100 | |||
1101 | # | ||
1102 | # Security options | ||
1103 | # | ||
1104 | # CONFIG_KEYS is not set | ||
1105 | # CONFIG_SECURITY is not set | ||
1106 | # CONFIG_SECURITY_FILE_CAPABILITIES is not set | ||
1107 | # CONFIG_CRYPTO is not set | ||
1108 | CONFIG_PPC_CLOCK=y | ||
1109 | CONFIG_PPC_LIB_RHEAP=y | ||
diff --git a/arch/powerpc/platforms/52xx/mpc5200_simple.c b/arch/powerpc/platforms/52xx/mpc5200_simple.c index c48b82bc2aad..a3bda0b9f1ff 100644 --- a/arch/powerpc/platforms/52xx/mpc5200_simple.c +++ b/arch/powerpc/platforms/52xx/mpc5200_simple.c | |||
@@ -51,6 +51,7 @@ static void __init mpc5200_simple_setup_arch(void) | |||
51 | /* list of the supported boards */ | 51 | /* list of the supported boards */ |
52 | static char *board[] __initdata = { | 52 | static char *board[] __initdata = { |
53 | "promess,motionpro", | 53 | "promess,motionpro", |
54 | "phytec,pcm030", | ||
54 | "schindler,cm5200", | 55 | "schindler,cm5200", |
55 | "tqc,tqm5200", | 56 | "tqc,tqm5200", |
56 | NULL | 57 | NULL |