aboutsummaryrefslogtreecommitdiffstats
path: root/arch/powerpc
diff options
context:
space:
mode:
Diffstat (limited to 'arch/powerpc')
-rw-r--r--arch/powerpc/boot/Makefile1
-rw-r--r--arch/powerpc/boot/dts/sbc8560.dts406
-rw-r--r--arch/powerpc/configs/85xx/sbc8560_defconfig65
-rw-r--r--arch/powerpc/platforms/85xx/Kconfig6
-rw-r--r--arch/powerpc/platforms/85xx/Makefile1
-rw-r--r--arch/powerpc/platforms/85xx/sbc8560.c254
6 files changed, 0 insertions, 733 deletions
diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
index c802a90ae2d7..b7d833382be4 100644
--- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile
@@ -276,7 +276,6 @@ image-$(CONFIG_TQM8548) += cuImage.tqm8548
276image-$(CONFIG_TQM8555) += cuImage.tqm8555 276image-$(CONFIG_TQM8555) += cuImage.tqm8555
277image-$(CONFIG_TQM8560) += cuImage.tqm8560 277image-$(CONFIG_TQM8560) += cuImage.tqm8560
278image-$(CONFIG_SBC8548) += cuImage.sbc8548 278image-$(CONFIG_SBC8548) += cuImage.sbc8548
279image-$(CONFIG_SBC8560) += cuImage.sbc8560
280image-$(CONFIG_KSI8560) += cuImage.ksi8560 279image-$(CONFIG_KSI8560) += cuImage.ksi8560
281 280
282# Board ports in arch/powerpc/platform/embedded6xx/Kconfig 281# Board ports in arch/powerpc/platform/embedded6xx/Kconfig
diff --git a/arch/powerpc/boot/dts/sbc8560.dts b/arch/powerpc/boot/dts/sbc8560.dts
deleted file mode 100644
index 72078eb15616..000000000000
--- a/arch/powerpc/boot/dts/sbc8560.dts
+++ /dev/null
@@ -1,406 +0,0 @@
1/*
2 * SBC8560 Device Tree Source
3 *
4 * Copyright 2007 Wind River Systems Inc.
5 *
6 * Paul Gortmaker (see MAINTAINERS for contact information)
7 *
8 * This program is free software; you can redistribute it and/or modify it
9 * under the terms of the GNU General Public License as published by the
10 * Free Software Foundation; either version 2 of the License, or (at your
11 * option) any later version.
12 */
13
14/dts-v1/;
15
16/ {
17 model = "SBC8560";
18 compatible = "SBC8560";
19 #address-cells = <1>;
20 #size-cells = <1>;
21
22 aliases {
23 ethernet0 = &enet0;
24 ethernet1 = &enet1;
25 ethernet2 = &enet2;
26 ethernet3 = &enet3;
27 serial0 = &serial0;
28 serial1 = &serial1;
29 pci0 = &pci0;
30 };
31
32 cpus {
33 #address-cells = <1>;
34 #size-cells = <0>;
35
36 PowerPC,8560@0 {
37 device_type = "cpu";
38 reg = <0>;
39 d-cache-line-size = <0x20>; // 32 bytes
40 i-cache-line-size = <0x20>; // 32 bytes
41 d-cache-size = <0x8000>; // L1, 32K
42 i-cache-size = <0x8000>; // L1, 32K
43 timebase-frequency = <0>; // From uboot
44 bus-frequency = <0>;
45 clock-frequency = <0>;
46 next-level-cache = <&L2>;
47 };
48 };
49
50 memory {
51 device_type = "memory";
52 reg = <0x00000000 0x20000000>;
53 };
54
55 soc@ff700000 {
56 #address-cells = <1>;
57 #size-cells = <1>;
58 device_type = "soc";
59 ranges = <0x0 0xff700000 0x00100000>;
60 clock-frequency = <0>;
61
62 ecm-law@0 {
63 compatible = "fsl,ecm-law";
64 reg = <0x0 0x1000>;
65 fsl,num-laws = <8>;
66 };
67
68 ecm@1000 {
69 compatible = "fsl,mpc8560-ecm", "fsl,ecm";
70 reg = <0x1000 0x1000>;
71 interrupts = <17 2>;
72 interrupt-parent = <&mpic>;
73 };
74
75 memory-controller@2000 {
76 compatible = "fsl,mpc8560-memory-controller";
77 reg = <0x2000 0x1000>;
78 interrupt-parent = <&mpic>;
79 interrupts = <0x12 0x2>;
80 };
81
82 L2: l2-cache-controller@20000 {
83 compatible = "fsl,mpc8560-l2-cache-controller";
84 reg = <0x20000 0x1000>;
85 cache-line-size = <0x20>; // 32 bytes
86 cache-size = <0x40000>; // L2, 256K
87 interrupt-parent = <&mpic>;
88 interrupts = <0x10 0x2>;
89 };
90
91 i2c@3000 {
92 #address-cells = <1>;
93 #size-cells = <0>;
94 cell-index = <0>;
95 compatible = "fsl-i2c";
96 reg = <0x3000 0x100>;
97 interrupts = <0x2b 0x2>;
98 interrupt-parent = <&mpic>;
99 dfsrr;
100 };
101
102 i2c@3100 {
103 #address-cells = <1>;
104 #size-cells = <0>;
105 cell-index = <1>;
106 compatible = "fsl-i2c";
107 reg = <0x3100 0x100>;
108 interrupts = <0x2b 0x2>;
109 interrupt-parent = <&mpic>;
110 dfsrr;
111 };
112
113 dma@21300 {
114 #address-cells = <1>;
115 #size-cells = <1>;
116 compatible = "fsl,mpc8560-dma", "fsl,eloplus-dma";
117 reg = <0x21300 0x4>;
118 ranges = <0x0 0x21100 0x200>;
119 cell-index = <0>;
120 dma-channel@0 {
121 compatible = "fsl,mpc8560-dma-channel",
122 "fsl,eloplus-dma-channel";
123 reg = <0x0 0x80>;
124 cell-index = <0>;
125 interrupt-parent = <&mpic>;
126 interrupts = <20 2>;
127 };
128 dma-channel@80 {
129 compatible = "fsl,mpc8560-dma-channel",
130 "fsl,eloplus-dma-channel";
131 reg = <0x80 0x80>;
132 cell-index = <1>;
133 interrupt-parent = <&mpic>;
134 interrupts = <21 2>;
135 };
136 dma-channel@100 {
137 compatible = "fsl,mpc8560-dma-channel",
138 "fsl,eloplus-dma-channel";
139 reg = <0x100 0x80>;
140 cell-index = <2>;
141 interrupt-parent = <&mpic>;
142 interrupts = <22 2>;
143 };
144 dma-channel@180 {
145 compatible = "fsl,mpc8560-dma-channel",
146 "fsl,eloplus-dma-channel";
147 reg = <0x180 0x80>;
148 cell-index = <3>;
149 interrupt-parent = <&mpic>;
150 interrupts = <23 2>;
151 };
152 };
153
154 enet0: ethernet@24000 {
155 #address-cells = <1>;
156 #size-cells = <1>;
157 cell-index = <0>;
158 device_type = "network";
159 model = "TSEC";
160 compatible = "gianfar";
161 reg = <0x24000 0x1000>;
162 ranges = <0x0 0x24000 0x1000>;
163 local-mac-address = [ 00 00 00 00 00 00 ];
164 interrupts = <0x1d 0x2 0x1e 0x2 0x22 0x2>;
165 interrupt-parent = <&mpic>;
166 tbi-handle = <&tbi0>;
167 phy-handle = <&phy0>;
168
169 mdio@520 {
170 #address-cells = <1>;
171 #size-cells = <0>;
172 compatible = "fsl,gianfar-mdio";
173 reg = <0x520 0x20>;
174 phy0: ethernet-phy@19 {
175 interrupt-parent = <&mpic>;
176 interrupts = <0x6 0x1>;
177 reg = <0x19>;
178 device_type = "ethernet-phy";
179 };
180 phy1: ethernet-phy@1a {
181 interrupt-parent = <&mpic>;
182 interrupts = <0x7 0x1>;
183 reg = <0x1a>;
184 device_type = "ethernet-phy";
185 };
186 phy2: ethernet-phy@1b {
187 interrupt-parent = <&mpic>;
188 interrupts = <0x8 0x1>;
189 reg = <0x1b>;
190 device_type = "ethernet-phy";
191 };
192 phy3: ethernet-phy@1c {
193 interrupt-parent = <&mpic>;
194 interrupts = <0x8 0x1>;
195 reg = <0x1c>;
196 device_type = "ethernet-phy";
197 };
198 tbi0: tbi-phy@11 {
199 reg = <0x11>;
200 device_type = "tbi-phy";
201 };
202 };
203 };
204
205 enet1: ethernet@25000 {
206 #address-cells = <1>;
207 #size-cells = <1>;
208 cell-index = <1>;
209 device_type = "network";
210 model = "TSEC";
211 compatible = "gianfar";
212 reg = <0x25000 0x1000>;
213 ranges = <0x0 0x25000 0x1000>;
214 local-mac-address = [ 00 00 00 00 00 00 ];
215 interrupts = <0x23 0x2 0x24 0x2 0x28 0x2>;
216 interrupt-parent = <&mpic>;
217 tbi-handle = <&tbi1>;
218 phy-handle = <&phy1>;
219
220 mdio@520 {
221 #address-cells = <1>;
222 #size-cells = <0>;
223 compatible = "fsl,gianfar-tbi";
224 reg = <0x520 0x20>;
225
226 tbi1: tbi-phy@11 {
227 reg = <0x11>;
228 device_type = "tbi-phy";
229 };
230 };
231 };
232
233 mpic: pic@40000 {
234 interrupt-controller;
235 #address-cells = <0>;
236 #interrupt-cells = <2>;
237 compatible = "chrp,open-pic";
238 reg = <0x40000 0x40000>;
239 device_type = "open-pic";
240 };
241
242 cpm@919c0 {
243 #address-cells = <1>;
244 #size-cells = <1>;
245 compatible = "fsl,mpc8560-cpm", "fsl,cpm2";
246 reg = <0x919c0 0x30>;
247 ranges;
248
249 muram@80000 {
250 #address-cells = <1>;
251 #size-cells = <1>;
252 ranges = <0x0 0x80000 0x10000>;
253
254 data@0 {
255 compatible = "fsl,cpm-muram-data";
256 reg = <0x0 0x4000 0x9000 0x2000>;
257 };
258 };
259
260 brg@919f0 {
261 compatible = "fsl,mpc8560-brg",
262 "fsl,cpm2-brg",
263 "fsl,cpm-brg";
264 reg = <0x919f0 0x10 0x915f0 0x10>;
265 clock-frequency = <165000000>;
266 };
267
268 cpmpic: pic@90c00 {
269 interrupt-controller;
270 #address-cells = <0>;
271 #interrupt-cells = <2>;
272 interrupts = <0x2e 0x2>;
273 interrupt-parent = <&mpic>;
274 reg = <0x90c00 0x80>;
275 compatible = "fsl,mpc8560-cpm-pic", "fsl,cpm2-pic";
276 };
277
278 enet2: ethernet@91320 {
279 device_type = "network";
280 compatible = "fsl,mpc8560-fcc-enet",
281 "fsl,cpm2-fcc-enet";
282 reg = <0x91320 0x20 0x88500 0x100 0x913b0 0x1>;
283 local-mac-address = [ 00 00 00 00 00 00 ];
284 fsl,cpm-command = <0x16200300>;
285 interrupts = <0x21 0x8>;
286 interrupt-parent = <&cpmpic>;
287 phy-handle = <&phy2>;
288 };
289
290 enet3: ethernet@91340 {
291 device_type = "network";
292 compatible = "fsl,mpc8560-fcc-enet",
293 "fsl,cpm2-fcc-enet";
294 reg = <0x91340 0x20 0x88600 0x100 0x913d0 0x1>;
295 local-mac-address = [ 00 00 00 00 00 00 ];
296 fsl,cpm-command = <0x1a400300>;
297 interrupts = <0x22 0x8>;
298 interrupt-parent = <&cpmpic>;
299 phy-handle = <&phy3>;
300 };
301 };
302
303 global-utilities@e0000 {
304 compatible = "fsl,mpc8560-guts";
305 reg = <0xe0000 0x1000>;
306 };
307 };
308
309 pci0: pci@ff708000 {
310 #interrupt-cells = <1>;
311 #size-cells = <2>;
312 #address-cells = <3>;
313 compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
314 device_type = "pci";
315 reg = <0xff708000 0x1000>;
316 clock-frequency = <66666666>;
317 interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
318 interrupt-map = <
319
320 /* IDSEL 0x02 */
321 0x1000 0x0 0x0 0x1 &mpic 0x2 0x1
322 0x1000 0x0 0x0 0x2 &mpic 0x3 0x1
323 0x1000 0x0 0x0 0x3 &mpic 0x4 0x1
324 0x1000 0x0 0x0 0x4 &mpic 0x5 0x1>;
325
326 interrupt-parent = <&mpic>;
327 interrupts = <0x18 0x2>;
328 bus-range = <0x0 0x0>;
329 ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x20000000
330 0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>;
331 };
332
333 localbus@ff705000 {
334 compatible = "fsl,mpc8560-localbus", "simple-bus";
335 #address-cells = <2>;
336 #size-cells = <1>;
337 reg = <0xff705000 0x100>; // BRx, ORx, etc.
338
339 ranges = <
340 0x0 0x0 0xff800000 0x0800000 // 8MB boot flash
341 0x1 0x0 0xe4000000 0x4000000 // 64MB flash
342 0x3 0x0 0x20000000 0x4000000 // 64MB SDRAM
343 0x4 0x0 0x24000000 0x4000000 // 64MB SDRAM
344 0x5 0x0 0xfc000000 0x0c00000 // EPLD
345 0x6 0x0 0xe0000000 0x4000000 // 64MB flash
346 0x7 0x0 0x80000000 0x0200000 // ATM1,2
347 >;
348
349 epld@5,0 {
350 compatible = "wrs,epld-localbus";
351 #address-cells = <2>;
352 #size-cells = <1>;
353 reg = <0x5 0x0 0xc00000>;
354 ranges = <
355 0x0 0x0 0x5 0x000000 0x1fff // LED disp.
356 0x1 0x0 0x5 0x100000 0x1fff // switches
357 0x2 0x0 0x5 0x200000 0x1fff // ID reg.
358 0x3 0x0 0x5 0x300000 0x1fff // status reg.
359 0x4 0x0 0x5 0x400000 0x1fff // reset reg.
360 0x5 0x0 0x5 0x500000 0x1fff // Wind port
361 0x7 0x0 0x5 0x700000 0x1fff // UART #1
362 0x8 0x0 0x5 0x800000 0x1fff // UART #2
363 0x9 0x0 0x5 0x900000 0x1fff // RTC
364 0xb 0x0 0x5 0xb00000 0x1fff // EEPROM
365 >;
366
367 bidr@2,0 {
368 compatible = "wrs,sbc8560-bidr";
369 reg = <0x2 0x0 0x10>;
370 };
371
372 bcsr@3,0 {
373 compatible = "wrs,sbc8560-bcsr";
374 reg = <0x3 0x0 0x10>;
375 };
376
377 brstcr@4,0 {
378 compatible = "wrs,sbc8560-brstcr";
379 reg = <0x4 0x0 0x10>;
380 };
381
382 serial0: serial@7,0 {
383 device_type = "serial";
384 compatible = "ns16550";
385 reg = <0x7 0x0 0x100>;
386 clock-frequency = <1843200>;
387 interrupts = <0x9 0x2>;
388 interrupt-parent = <&mpic>;
389 };
390
391 serial1: serial@8,0 {
392 device_type = "serial";
393 compatible = "ns16550";
394 reg = <0x8 0x0 0x100>;
395 clock-frequency = <1843200>;
396 interrupts = <0xa 0x2>;
397 interrupt-parent = <&mpic>;
398 };
399
400 rtc@9,0 {
401 compatible = "m48t59";
402 reg = <0x9 0x0 0x1fff>;
403 };
404 };
405 };
406};
diff --git a/arch/powerpc/configs/85xx/sbc8560_defconfig b/arch/powerpc/configs/85xx/sbc8560_defconfig
deleted file mode 100644
index f7fdb0318e4c..000000000000
--- a/arch/powerpc/configs/85xx/sbc8560_defconfig
+++ /dev/null
@@ -1,65 +0,0 @@
1CONFIG_PPC_85xx=y
2CONFIG_EXPERIMENTAL=y
3CONFIG_SYSVIPC=y
4CONFIG_LOG_BUF_SHIFT=14
5CONFIG_BLK_DEV_INITRD=y
6# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
7CONFIG_EXPERT=y
8CONFIG_SLAB=y
9# CONFIG_BLK_DEV_BSG is not set
10CONFIG_SBC8560=y
11CONFIG_BINFMT_MISC=y
12CONFIG_SPARSE_IRQ=y
13# CONFIG_SECCOMP is not set
14CONFIG_NET=y
15CONFIG_PACKET=y
16CONFIG_UNIX=y
17CONFIG_XFRM_USER=y
18CONFIG_INET=y
19CONFIG_IP_MULTICAST=y
20CONFIG_IP_PNP=y
21CONFIG_IP_PNP_DHCP=y
22CONFIG_IP_PNP_BOOTP=y
23CONFIG_SYN_COOKIES=y
24# CONFIG_INET_LRO is not set
25# CONFIG_IPV6 is not set
26CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
27# CONFIG_FW_LOADER is not set
28CONFIG_PROC_DEVICETREE=y
29CONFIG_BLK_DEV_LOOP=y
30CONFIG_BLK_DEV_RAM=y
31CONFIG_BLK_DEV_RAM_SIZE=32768
32CONFIG_NETDEVICES=y
33CONFIG_BROADCOM_PHY=y
34CONFIG_NET_ETHERNET=y
35CONFIG_MII=y
36CONFIG_GIANFAR=y
37# CONFIG_INPUT_MOUSEDEV is not set
38# CONFIG_INPUT_KEYBOARD is not set
39# CONFIG_INPUT_MOUSE is not set
40# CONFIG_SERIO is not set
41# CONFIG_VT is not set
42CONFIG_SERIAL_8250=y
43CONFIG_SERIAL_8250_CONSOLE=y
44CONFIG_SERIAL_8250_NR_UARTS=2
45CONFIG_SERIAL_8250_RUNTIME_UARTS=2
46# CONFIG_HW_RANDOM is not set
47CONFIG_VIDEO_OUTPUT_CONTROL=y
48CONFIG_RTC_CLASS=y
49CONFIG_RTC_DRV_M48T59=y
50CONFIG_INOTIFY=y
51CONFIG_PROC_KCORE=y
52CONFIG_TMPFS=y
53CONFIG_NFS_FS=y
54CONFIG_ROOT_NFS=y
55CONFIG_PARTITION_ADVANCED=y
56# CONFIG_MSDOS_PARTITION is not set
57CONFIG_MAGIC_SYSRQ=y
58CONFIG_DEBUG_KERNEL=y
59CONFIG_DETECT_HUNG_TASK=y
60CONFIG_DEBUG_MUTEXES=y
61# CONFIG_DEBUG_BUGVERBOSE is not set
62# CONFIG_RCU_CPU_STALL_DETECTOR is not set
63CONFIG_SYSCTL_SYSCALL_CHECK=y
64CONFIG_PPC_EARLY_DEBUG=y
65# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig
index f000d81c4e31..b3370be4a0c9 100644
--- a/arch/powerpc/platforms/85xx/Kconfig
+++ b/arch/powerpc/platforms/85xx/Kconfig
@@ -175,12 +175,6 @@ config SBC8548
175 help 175 help
176 This option enables support for the Wind River SBC8548 board 176 This option enables support for the Wind River SBC8548 board
177 177
178config SBC8560
179 bool "Wind River SBC8560"
180 select DEFAULT_UIMAGE
181 help
182 This option enables support for the Wind River SBC8560 board
183
184config GE_IMP3A 178config GE_IMP3A
185 bool "GE Intelligent Platforms IMP3A" 179 bool "GE Intelligent Platforms IMP3A"
186 select DEFAULT_UIMAGE 180 select DEFAULT_UIMAGE
diff --git a/arch/powerpc/platforms/85xx/Makefile b/arch/powerpc/platforms/85xx/Makefile
index 2125d4ca068a..50280cc524d2 100644
--- a/arch/powerpc/platforms/85xx/Makefile
+++ b/arch/powerpc/platforms/85xx/Makefile
@@ -22,7 +22,6 @@ obj-$(CONFIG_P4080_DS) += p4080_ds.o corenet_ds.o
22obj-$(CONFIG_P5020_DS) += p5020_ds.o corenet_ds.o 22obj-$(CONFIG_P5020_DS) += p5020_ds.o corenet_ds.o
23obj-$(CONFIG_STX_GP3) += stx_gp3.o 23obj-$(CONFIG_STX_GP3) += stx_gp3.o
24obj-$(CONFIG_TQM85xx) += tqm85xx.o 24obj-$(CONFIG_TQM85xx) += tqm85xx.o
25obj-$(CONFIG_SBC8560) += sbc8560.o
26obj-$(CONFIG_SBC8548) += sbc8548.o 25obj-$(CONFIG_SBC8548) += sbc8548.o
27obj-$(CONFIG_SOCRATES) += socrates.o socrates_fpga_pic.o 26obj-$(CONFIG_SOCRATES) += socrates.o socrates_fpga_pic.o
28obj-$(CONFIG_KSI8560) += ksi8560.o 27obj-$(CONFIG_KSI8560) += ksi8560.o
diff --git a/arch/powerpc/platforms/85xx/sbc8560.c b/arch/powerpc/platforms/85xx/sbc8560.c
deleted file mode 100644
index b1be632ede43..000000000000
--- a/arch/powerpc/platforms/85xx/sbc8560.c
+++ /dev/null
@@ -1,254 +0,0 @@
1/*
2 * Wind River SBC8560 setup and early boot code.
3 *
4 * Copyright 2007 Wind River Systems Inc.
5 *
6 * By Paul Gortmaker (see MAINTAINERS for contact information)
7 *
8 * Based largely on the MPC8560ADS support - Copyright 2005 Freescale Inc.
9 *
10 * This program is free software; you can redistribute it and/or modify it
11 * under the terms of the GNU General Public License as published by the
12 * Free Software Foundation; either version 2 of the License, or (at your
13 * option) any later version.
14 */
15
16#include <linux/stddef.h>
17#include <linux/kernel.h>
18#include <linux/pci.h>
19#include <linux/kdev_t.h>
20#include <linux/delay.h>
21#include <linux/seq_file.h>
22#include <linux/of_platform.h>
23
24#include <asm/time.h>
25#include <asm/machdep.h>
26#include <asm/pci-bridge.h>
27#include <asm/mpic.h>
28#include <mm/mmu_decl.h>
29#include <asm/udbg.h>
30
31#include <sysdev/fsl_soc.h>
32#include <sysdev/fsl_pci.h>
33
34#include "mpc85xx.h"
35
36#ifdef CONFIG_CPM2
37#include <asm/cpm2.h>
38#include <sysdev/cpm2_pic.h>
39#endif
40
41static void __init sbc8560_pic_init(void)
42{
43 struct mpic *mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN,
44 0, 256, " OpenPIC ");
45 BUG_ON(mpic == NULL);
46 mpic_init(mpic);
47
48 mpc85xx_cpm2_pic_init();
49}
50
51/*
52 * Setup the architecture
53 */
54#ifdef CONFIG_CPM2
55struct cpm_pin {
56 int port, pin, flags;
57};
58
59static const struct cpm_pin sbc8560_pins[] = {
60 /* SCC1 */
61 {3, 29, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
62 {3, 30, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
63 {3, 31, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
64
65 /* SCC2 */
66 {3, 26, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
67 {3, 27, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
68 {3, 28, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
69
70 /* FCC2 */
71 {1, 18, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
72 {1, 19, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
73 {1, 20, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
74 {1, 21, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
75 {1, 22, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
76 {1, 23, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
77 {1, 24, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
78 {1, 25, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
79 {1, 26, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
80 {1, 27, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
81 {1, 28, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
82 {1, 29, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
83 {1, 30, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
84 {1, 31, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
85 {2, 18, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, /* CLK14 */
86 {2, 19, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, /* CLK13 */
87
88 /* FCC3 */
89 {1, 4, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
90 {1, 5, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
91 {1, 6, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
92 {1, 7, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
93 {1, 8, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
94 {1, 9, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
95 {1, 10, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
96 {1, 11, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
97 {1, 12, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
98 {1, 13, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
99 {1, 14, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
100 {1, 15, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
101 {1, 16, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
102 {1, 17, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
103 {2, 16, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* CLK16 */
104 {2, 17, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* CLK15 */
105};
106
107static void __init init_ioports(void)
108{
109 int i;
110
111 for (i = 0; i < ARRAY_SIZE(sbc8560_pins); i++) {
112 const struct cpm_pin *pin = &sbc8560_pins[i];
113 cpm2_set_pin(pin->port, pin->pin, pin->flags);
114 }
115
116 cpm2_clk_setup(CPM_CLK_SCC1, CPM_BRG1, CPM_CLK_RX);
117 cpm2_clk_setup(CPM_CLK_SCC1, CPM_BRG1, CPM_CLK_TX);
118 cpm2_clk_setup(CPM_CLK_SCC2, CPM_BRG2, CPM_CLK_RX);
119 cpm2_clk_setup(CPM_CLK_SCC2, CPM_BRG2, CPM_CLK_TX);
120 cpm2_clk_setup(CPM_CLK_FCC2, CPM_CLK13, CPM_CLK_RX);
121 cpm2_clk_setup(CPM_CLK_FCC2, CPM_CLK14, CPM_CLK_TX);
122 cpm2_clk_setup(CPM_CLK_FCC3, CPM_CLK15, CPM_CLK_RX);
123 cpm2_clk_setup(CPM_CLK_FCC3, CPM_CLK16, CPM_CLK_TX);
124}
125#endif
126
127static void __init sbc8560_setup_arch(void)
128{
129#ifdef CONFIG_PCI
130 struct device_node *np;
131#endif
132
133 if (ppc_md.progress)
134 ppc_md.progress("sbc8560_setup_arch()", 0);
135
136#ifdef CONFIG_CPM2
137 cpm2_reset();
138 init_ioports();
139#endif
140
141#ifdef CONFIG_PCI
142 for_each_compatible_node(np, "pci", "fsl,mpc8540-pci")
143 fsl_add_bridge(np, 1);
144#endif
145}
146
147static void sbc8560_show_cpuinfo(struct seq_file *m)
148{
149 uint pvid, svid, phid1;
150
151 pvid = mfspr(SPRN_PVR);
152 svid = mfspr(SPRN_SVR);
153
154 seq_printf(m, "Vendor\t\t: Wind River\n");
155 seq_printf(m, "PVR\t\t: 0x%x\n", pvid);
156 seq_printf(m, "SVR\t\t: 0x%x\n", svid);
157
158 /* Display cpu Pll setting */
159 phid1 = mfspr(SPRN_HID1);
160 seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f));
161}
162
163machine_device_initcall(sbc8560, mpc85xx_common_publish_devices);
164
165/*
166 * Called very early, device-tree isn't unflattened
167 */
168static int __init sbc8560_probe(void)
169{
170 unsigned long root = of_get_flat_dt_root();
171
172 return of_flat_dt_is_compatible(root, "SBC8560");
173}
174
175#ifdef CONFIG_RTC_DRV_M48T59
176static int __init sbc8560_rtc_init(void)
177{
178 struct device_node *np;
179 struct resource res;
180 struct platform_device *rtc_dev;
181
182 np = of_find_compatible_node(NULL, NULL, "m48t59");
183 if (np == NULL) {
184 printk("No RTC in DTB. Has it been eaten by wild dogs?\n");
185 return -ENODEV;
186 }
187
188 of_address_to_resource(np, 0, &res);
189 of_node_put(np);
190
191 printk("Found RTC (m48t59) at i/o 0x%x\n", res.start);
192
193 rtc_dev = platform_device_register_simple("rtc-m48t59", 0, &res, 1);
194
195 if (IS_ERR(rtc_dev)) {
196 printk("Registering sbc8560 RTC device failed\n");
197 return PTR_ERR(rtc_dev);
198 }
199
200 return 0;
201}
202
203arch_initcall(sbc8560_rtc_init);
204
205#endif /* M48T59 */
206
207static __u8 __iomem *brstcr;
208
209static int __init sbc8560_bdrstcr_init(void)
210{
211 struct device_node *np;
212 struct resource res;
213
214 np = of_find_compatible_node(NULL, NULL, "wrs,sbc8560-brstcr");
215 if (np == NULL) {
216 printk(KERN_WARNING "sbc8560: No board specific RSTCR in DTB.\n");
217 return -ENODEV;
218 }
219
220 of_address_to_resource(np, 0, &res);
221
222 printk(KERN_INFO "sbc8560: Found BRSTCR at %pR\n", &res);
223
224 brstcr = ioremap(res.start, resource_size(&res));
225 if(!brstcr)
226 printk(KERN_WARNING "sbc8560: ioremap of brstcr failed.\n");
227
228 of_node_put(np);
229
230 return 0;
231}
232
233arch_initcall(sbc8560_bdrstcr_init);
234
235void sbc8560_rstcr_restart(char * cmd)
236{
237 local_irq_disable();
238 if(brstcr)
239 clrbits8(brstcr, 0x80);
240
241 while(1);
242}
243
244define_machine(sbc8560) {
245 .name = "SBC8560",
246 .probe = sbc8560_probe,
247 .setup_arch = sbc8560_setup_arch,
248 .init_IRQ = sbc8560_pic_init,
249 .show_cpuinfo = sbc8560_show_cpuinfo,
250 .get_irq = mpic_get_irq,
251 .restart = sbc8560_rstcr_restart,
252 .calibrate_decr = generic_calibrate_decr,
253 .progress = udbg_progress,
254};
generated by cgit v1.2.2 (git 2.25.0) at 2025-01-28 16:41:15 -0500