aboutsummaryrefslogtreecommitdiffstats
path: root/arch/powerpc
diff options
context:
space:
mode:
Diffstat (limited to 'arch/powerpc')
-rw-r--r--arch/powerpc/boot/dts/mpc8540ads.dts257
-rw-r--r--arch/powerpc/boot/dts/mpc8541cds.dts244
-rw-r--r--arch/powerpc/boot/dts/mpc8548cds.dts287
-rw-r--r--arch/powerpc/boot/dts/mpc8555cds.dts244
-rw-r--r--arch/powerpc/kernel/legacy_serial.c8
-rw-r--r--arch/powerpc/kernel/prom_parse.c13
-rw-r--r--arch/powerpc/kernel/time.c25
-rw-r--r--arch/powerpc/kernel/traps.c8
-rw-r--r--arch/powerpc/mm/hugetlbpage.c2
-rw-r--r--arch/powerpc/platforms/85xx/Kconfig1
-rw-r--r--arch/powerpc/platforms/85xx/mpc85xx_ads.c162
-rw-r--r--arch/powerpc/platforms/85xx/mpc85xx_cds.c210
-rw-r--r--arch/powerpc/platforms/86xx/mpc8641_hpcn.h32
-rw-r--r--arch/powerpc/platforms/86xx/mpc86xx_hpcn.c324
-rw-r--r--arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c73
-rw-r--r--arch/powerpc/platforms/powermac/bootx_init.c15
-rw-r--r--arch/powerpc/sysdev/fsl_soc.c30
-rw-r--r--arch/powerpc/sysdev/tsi108_dev.c10
-rw-r--r--arch/powerpc/sysdev/tsi108_pci.c21
19 files changed, 1451 insertions, 515 deletions
diff --git a/arch/powerpc/boot/dts/mpc8540ads.dts b/arch/powerpc/boot/dts/mpc8540ads.dts
new file mode 100644
index 000000000000..5f41c1f7a5f3
--- /dev/null
+++ b/arch/powerpc/boot/dts/mpc8540ads.dts
@@ -0,0 +1,257 @@
1/*
2 * MPC8540 ADS Device Tree Source
3 *
4 * Copyright 2006 Freescale Semiconductor Inc.
5 *
6 * This program is free software; you can redistribute it and/or modify it
7 * under the terms of the GNU General Public License as published by the
8 * Free Software Foundation; either version 2 of the License, or (at your
9 * option) any later version.
10 */
11
12
13/ {
14 model = "MPC8540ADS";
15 compatible = "MPC85xxADS";
16 #address-cells = <1>;
17 #size-cells = <1>;
18 linux,phandle = <100>;
19
20 cpus {
21 #cpus = <1>;
22 #address-cells = <1>;
23 #size-cells = <0>;
24 linux,phandle = <200>;
25
26 PowerPC,8540@0 {
27 device_type = "cpu";
28 reg = <0>;
29 d-cache-line-size = <20>; // 32 bytes
30 i-cache-line-size = <20>; // 32 bytes
31 d-cache-size = <8000>; // L1, 32K
32 i-cache-size = <8000>; // L1, 32K
33 timebase-frequency = <0>; // 33 MHz, from uboot
34 bus-frequency = <0>; // 166 MHz
35 clock-frequency = <0>; // 825 MHz, from uboot
36 32-bit;
37 linux,phandle = <201>;
38 };
39 };
40
41 memory {
42 device_type = "memory";
43 linux,phandle = <300>;
44 reg = <00000000 08000000>; // 128M at 0x0
45 };
46
47 soc8540@e0000000 {
48 #address-cells = <1>;
49 #size-cells = <1>;
50 #interrupt-cells = <2>;
51 device_type = "soc";
52 ranges = <0 e0000000 00100000>;
53 reg = <e0000000 00100000>; // CCSRBAR 1M
54 bus-frequency = <0>;
55
56 i2c@3000 {
57 device_type = "i2c";
58 compatible = "fsl-i2c";
59 reg = <3000 100>;
60 interrupts = <1b 2>;
61 interrupt-parent = <40000>;
62 dfsrr;
63 };
64
65 mdio@24520 {
66 #address-cells = <1>;
67 #size-cells = <0>;
68 device_type = "mdio";
69 compatible = "gianfar";
70 reg = <24520 20>;
71 linux,phandle = <24520>;
72 ethernet-phy@0 {
73 linux,phandle = <2452000>;
74 interrupt-parent = <40000>;
75 interrupts = <35 1>;
76 reg = <0>;
77 device_type = "ethernet-phy";
78 };
79 ethernet-phy@1 {
80 linux,phandle = <2452001>;
81 interrupt-parent = <40000>;
82 interrupts = <35 1>;
83 reg = <1>;
84 device_type = "ethernet-phy";
85 };
86 ethernet-phy@3 {
87 linux,phandle = <2452003>;
88 interrupt-parent = <40000>;
89 interrupts = <37 1>;
90 reg = <3>;
91 device_type = "ethernet-phy";
92 };
93 };
94
95 ethernet@24000 {
96 #address-cells = <1>;
97 #size-cells = <0>;
98 device_type = "network";
99 model = "TSEC";
100 compatible = "gianfar";
101 reg = <24000 1000>;
102 address = [ 00 E0 0C 00 73 00 ];
103 local-mac-address = [ 00 E0 0C 00 73 00 ];
104 interrupts = <d 2 e 2 12 2>;
105 interrupt-parent = <40000>;
106 phy-handle = <2452000>;
107 };
108
109 ethernet@25000 {
110 #address-cells = <1>;
111 #size-cells = <0>;
112 device_type = "network";
113 model = "TSEC";
114 compatible = "gianfar";
115 reg = <25000 1000>;
116 address = [ 00 E0 0C 00 73 01 ];
117 local-mac-address = [ 00 E0 0C 00 73 01 ];
118 interrupts = <13 2 14 2 18 2>;
119 interrupt-parent = <40000>;
120 phy-handle = <2452001>;
121 };
122
123 ethernet@26000 {
124 #address-cells = <1>;
125 #size-cells = <0>;
126 device_type = "network";
127 model = "FEC";
128 compatible = "gianfar";
129 reg = <26000 1000>;
130 address = [ 00 E0 0C 00 73 02 ];
131 local-mac-address = [ 00 E0 0C 00 73 02 ];
132 interrupts = <19 2>;
133 interrupt-parent = <40000>;
134 phy-handle = <2452003>;
135 };
136
137 serial@4500 {
138 device_type = "serial";
139 compatible = "ns16550";
140 reg = <4500 100>; // reg base, size
141 clock-frequency = <0>; // should we fill in in uboot?
142 interrupts = <1a 2>;
143 interrupt-parent = <40000>;
144 };
145
146 serial@4600 {
147 device_type = "serial";
148 compatible = "ns16550";
149 reg = <4600 100>; // reg base, size
150 clock-frequency = <0>; // should we fill in in uboot?
151 interrupts = <1a 2>;
152 interrupt-parent = <40000>;
153 };
154 pci@8000 {
155 linux,phandle = <8000>;
156 interrupt-map-mask = <f800 0 0 7>;
157 interrupt-map = <
158
159 /* IDSEL 0x02 */
160 1000 0 0 1 40000 31 1
161 1000 0 0 2 40000 32 1
162 1000 0 0 3 40000 33 1
163 1000 0 0 4 40000 34 1
164
165 /* IDSEL 0x03 */
166 1800 0 0 1 40000 34 1
167 1800 0 0 2 40000 31 1
168 1800 0 0 3 40000 32 1
169 1800 0 0 4 40000 33 1
170
171 /* IDSEL 0x04 */
172 2000 0 0 1 40000 33 1
173 2000 0 0 2 40000 34 1
174 2000 0 0 3 40000 31 1
175 2000 0 0 4 40000 32 1
176
177 /* IDSEL 0x05 */
178 2800 0 0 1 40000 32 1
179 2800 0 0 2 40000 33 1
180 2800 0 0 3 40000 34 1
181 2800 0 0 4 40000 31 1
182
183 /* IDSEL 0x0c */
184 6000 0 0 1 40000 31 1
185 6000 0 0 2 40000 32 1
186 6000 0 0 3 40000 33 1
187 6000 0 0 4 40000 34 1
188
189 /* IDSEL 0x0d */
190 6800 0 0 1 40000 34 1
191 6800 0 0 2 40000 31 1
192 6800 0 0 3 40000 32 1
193 6800 0 0 4 40000 33 1
194
195 /* IDSEL 0x0e */
196 7000 0 0 1 40000 33 1
197 7000 0 0 2 40000 34 1
198 7000 0 0 3 40000 31 1
199 7000 0 0 4 40000 32 1
200
201 /* IDSEL 0x0f */
202 7800 0 0 1 40000 32 1
203 7800 0 0 2 40000 33 1
204 7800 0 0 3 40000 34 1
205 7800 0 0 4 40000 31 1
206
207 /* IDSEL 0x12 */
208 9000 0 0 1 40000 31 1
209 9000 0 0 2 40000 32 1
210 9000 0 0 3 40000 33 1
211 9000 0 0 4 40000 34 1
212
213 /* IDSEL 0x13 */
214 9800 0 0 1 40000 34 1
215 9800 0 0 2 40000 31 1
216 9800 0 0 3 40000 32 1
217 9800 0 0 4 40000 33 1
218
219 /* IDSEL 0x14 */
220 a000 0 0 1 40000 33 1
221 a000 0 0 2 40000 34 1
222 a000 0 0 3 40000 31 1
223 a000 0 0 4 40000 32 1
224
225 /* IDSEL 0x15 */
226 a800 0 0 1 40000 32 1
227 a800 0 0 2 40000 33 1
228 a800 0 0 3 40000 34 1
229 a800 0 0 4 40000 31 1>;
230 interrupt-parent = <40000>;
231 interrupts = <08 2>;
232 bus-range = <0 0>;
233 ranges = <02000000 0 80000000 80000000 0 20000000
234 01000000 0 00000000 e2000000 0 00100000>;
235 clock-frequency = <3f940aa>;
236 #interrupt-cells = <1>;
237 #size-cells = <2>;
238 #address-cells = <3>;
239 reg = <8000 1000>;
240 compatible = "85xx";
241 device_type = "pci";
242 };
243
244 pic@40000 {
245 linux,phandle = <40000>;
246 clock-frequency = <0>;
247 interrupt-controller;
248 #address-cells = <0>;
249 #interrupt-cells = <2>;
250 reg = <40000 40000>;
251 built-in;
252 compatible = "chrp,open-pic";
253 device_type = "open-pic";
254 big-endian;
255 };
256 };
257};
diff --git a/arch/powerpc/boot/dts/mpc8541cds.dts b/arch/powerpc/boot/dts/mpc8541cds.dts
new file mode 100644
index 000000000000..7be0bc659e1c
--- /dev/null
+++ b/arch/powerpc/boot/dts/mpc8541cds.dts
@@ -0,0 +1,244 @@
1/*
2 * MPC8541 CDS Device Tree Source
3 *
4 * Copyright 2006 Freescale Semiconductor Inc.
5 *
6 * This program is free software; you can redistribute it and/or modify it
7 * under the terms of the GNU General Public License as published by the
8 * Free Software Foundation; either version 2 of the License, or (at your
9 * option) any later version.
10 */
11
12
13/ {
14 model = "MPC8541CDS";
15 compatible = "MPC85xxCDS";
16 #address-cells = <1>;
17 #size-cells = <1>;
18 linux,phandle = <100>;
19
20 cpus {
21 #cpus = <1>;
22 #address-cells = <1>;
23 #size-cells = <0>;
24 linux,phandle = <200>;
25
26 PowerPC,8541@0 {
27 device_type = "cpu";
28 reg = <0>;
29 d-cache-line-size = <20>; // 32 bytes
30 i-cache-line-size = <20>; // 32 bytes
31 d-cache-size = <8000>; // L1, 32K
32 i-cache-size = <8000>; // L1, 32K
33 timebase-frequency = <0>; // 33 MHz, from uboot
34 bus-frequency = <0>; // 166 MHz
35 clock-frequency = <0>; // 825 MHz, from uboot
36 32-bit;
37 linux,phandle = <201>;
38 };
39 };
40
41 memory {
42 device_type = "memory";
43 linux,phandle = <300>;
44 reg = <00000000 08000000>; // 128M at 0x0
45 };
46
47 soc8541@e0000000 {
48 #address-cells = <1>;
49 #size-cells = <1>;
50 #interrupt-cells = <2>;
51 device_type = "soc";
52 ranges = <0 e0000000 00100000>;
53 reg = <e0000000 00100000>; // CCSRBAR 1M
54 bus-frequency = <0>;
55
56 i2c@3000 {
57 device_type = "i2c";
58 compatible = "fsl-i2c";
59 reg = <3000 100>;
60 interrupts = <1b 2>;
61 interrupt-parent = <40000>;
62 dfsrr;
63 };
64
65 mdio@24520 {
66 #address-cells = <1>;
67 #size-cells = <0>;
68 device_type = "mdio";
69 compatible = "gianfar";
70 reg = <24520 20>;
71 linux,phandle = <24520>;
72 ethernet-phy@0 {
73 linux,phandle = <2452000>;
74 interrupt-parent = <40000>;
75 interrupts = <35 0>;
76 reg = <0>;
77 device_type = "ethernet-phy";
78 };
79 ethernet-phy@1 {
80 linux,phandle = <2452001>;
81 interrupt-parent = <40000>;
82 interrupts = <35 0>;
83 reg = <1>;
84 device_type = "ethernet-phy";
85 };
86 };
87
88 ethernet@24000 {
89 #address-cells = <1>;
90 #size-cells = <0>;
91 device_type = "network";
92 model = "TSEC";
93 compatible = "gianfar";
94 reg = <24000 1000>;
95 local-mac-address = [ 00 E0 0C 00 73 00 ];
96 interrupts = <d 2 e 2 12 2>;
97 interrupt-parent = <40000>;
98 phy-handle = <2452000>;
99 };
100
101 ethernet@25000 {
102 #address-cells = <1>;
103 #size-cells = <0>;
104 device_type = "network";
105 model = "TSEC";
106 compatible = "gianfar";
107 reg = <25000 1000>;
108 local-mac-address = [ 00 E0 0C 00 73 01 ];
109 interrupts = <13 2 14 2 18 2>;
110 interrupt-parent = <40000>;
111 phy-handle = <2452001>;
112 };
113
114 serial@4500 {
115 device_type = "serial";
116 compatible = "ns16550";
117 reg = <4500 100>; // reg base, size
118 clock-frequency = <0>; // should we fill in in uboot?
119 interrupts = <1a 2>;
120 interrupt-parent = <40000>;
121 };
122
123 serial@4600 {
124 device_type = "serial";
125 compatible = "ns16550";
126 reg = <4600 100>; // reg base, size
127 clock-frequency = <0>; // should we fill in in uboot?
128 interrupts = <1a 2>;
129 interrupt-parent = <40000>;
130 };
131
132 pci@8000 {
133 linux,phandle = <8000>;
134 interrupt-map-mask = <1f800 0 0 7>;
135 interrupt-map = <
136
137 /* IDSEL 0x10 */
138 08000 0 0 1 40000 30 1
139 08000 0 0 2 40000 31 1
140 08000 0 0 3 40000 32 1
141 08000 0 0 4 40000 33 1
142
143 /* IDSEL 0x11 */
144 08800 0 0 1 40000 30 1
145 08800 0 0 2 40000 31 1
146 08800 0 0 3 40000 32 1
147 08800 0 0 4 40000 33 1
148
149 /* IDSEL 0x12 (Slot 1) */
150 09000 0 0 1 40000 30 1
151 09000 0 0 2 40000 31 1
152 09000 0 0 3 40000 32 1
153 09000 0 0 4 40000 33 1
154
155 /* IDSEL 0x13 (Slot 2) */
156 09800 0 0 1 40000 31 1
157 09800 0 0 2 40000 32 1
158 09800 0 0 3 40000 33 1
159 09800 0 0 4 40000 30 1
160
161 /* IDSEL 0x14 (Slot 3) */
162 0a000 0 0 1 40000 32 1
163 0a000 0 0 2 40000 33 1
164 0a000 0 0 3 40000 30 1
165 0a000 0 0 4 40000 31 1
166
167 /* IDSEL 0x15 (Slot 4) */
168 0a800 0 0 1 40000 33 1
169 0a800 0 0 2 40000 30 1
170 0a800 0 0 3 40000 31 1
171 0a800 0 0 4 40000 32 1
172
173 /* Bus 1 (Tundra Bridge) */
174 /* IDSEL 0x12 (ISA bridge) */
175 19000 0 0 1 40000 30 1
176 19000 0 0 2 40000 31 1
177 19000 0 0 3 40000 32 1
178 19000 0 0 4 40000 33 1>;
179 interrupt-parent = <40000>;
180 interrupts = <08 2>;
181 bus-range = <0 0>;
182 ranges = <02000000 0 80000000 80000000 0 20000000
183 01000000 0 00000000 e2000000 0 00100000>;
184 clock-frequency = <3f940aa>;
185 #interrupt-cells = <1>;
186 #size-cells = <2>;
187 #address-cells = <3>;
188 reg = <8000 1000>;
189 compatible = "85xx";
190 device_type = "pci";
191
192 i8259@19000 {
193 clock-frequency = <0>;
194 interrupt-controller;
195 device_type = "interrupt-controller";
196 reg = <19000 0 0 0 1>;
197 #address-cells = <0>;
198 #interrupt-cells = <2>;
199 built-in;
200 compatible = "chrp,iic";
201 big-endian;
202 interrupts = <1>;
203 interrupt-parent = <8000>;
204 };
205 };
206
207 pci@9000 {
208 linux,phandle = <9000>;
209 interrupt-map-mask = <f800 0 0 7>;
210 interrupt-map = <
211
212 /* IDSEL 0x15 */
213 a800 0 0 1 40000 3b 1
214 a800 0 0 2 40000 3b 1
215 a800 0 0 3 40000 3b 1
216 a800 0 0 4 40000 3b 1>;
217 interrupt-parent = <40000>;
218 interrupts = <09 2>;
219 bus-range = <0 0>;
220 ranges = <02000000 0 a0000000 a0000000 0 20000000
221 01000000 0 00000000 e3000000 0 00100000>;
222 clock-frequency = <3f940aa>;
223 #interrupt-cells = <1>;
224 #size-cells = <2>;
225 #address-cells = <3>;
226 reg = <9000 1000>;
227 compatible = "85xx";
228 device_type = "pci";
229 };
230
231 pic@40000 {
232 linux,phandle = <40000>;
233 clock-frequency = <0>;
234 interrupt-controller;
235 #address-cells = <0>;
236 #interrupt-cells = <2>;
237 reg = <40000 40000>;
238 built-in;
239 compatible = "chrp,open-pic";
240 device_type = "open-pic";
241 big-endian;
242 };
243 };
244};
diff --git a/arch/powerpc/boot/dts/mpc8548cds.dts b/arch/powerpc/boot/dts/mpc8548cds.dts
new file mode 100644
index 000000000000..893d7957c174
--- /dev/null
+++ b/arch/powerpc/boot/dts/mpc8548cds.dts
@@ -0,0 +1,287 @@
1/*
2 * MPC8555 CDS Device Tree Source
3 *
4 * Copyright 2006 Freescale Semiconductor Inc.
5 *
6 * This program is free software; you can redistribute it and/or modify it
7 * under the terms of the GNU General Public License as published by the
8 * Free Software Foundation; either version 2 of the License, or (at your
9 * option) any later version.
10 */
11
12
13/ {
14 model = "MPC8548CDS";
15 compatible = "MPC85xxCDS";
16 #address-cells = <1>;
17 #size-cells = <1>;
18 linux,phandle = <100>;
19
20 cpus {
21 #cpus = <1>;
22 #address-cells = <1>;
23 #size-cells = <0>;
24 linux,phandle = <200>;
25
26 PowerPC,8548@0 {
27 device_type = "cpu";
28 reg = <0>;
29 d-cache-line-size = <20>; // 32 bytes
30 i-cache-line-size = <20>; // 32 bytes
31 d-cache-size = <8000>; // L1, 32K
32 i-cache-size = <8000>; // L1, 32K
33 timebase-frequency = <0>; // 33 MHz, from uboot
34 bus-frequency = <0>; // 166 MHz
35 clock-frequency = <0>; // 825 MHz, from uboot
36 32-bit;
37 linux,phandle = <201>;
38 };
39 };
40
41 memory {
42 device_type = "memory";
43 linux,phandle = <300>;
44 reg = <00000000 08000000>; // 128M at 0x0
45 };
46
47 soc8548@e0000000 {
48 #address-cells = <1>;
49 #size-cells = <1>;
50 #interrupt-cells = <2>;
51 device_type = "soc";
52 ranges = <0 e0000000 00100000>;
53 reg = <e0000000 00100000>; // CCSRBAR 1M
54 bus-frequency = <0>;
55
56 i2c@3000 {
57 device_type = "i2c";
58 compatible = "fsl-i2c";
59 reg = <3000 100>;
60 interrupts = <1b 2>;
61 interrupt-parent = <40000>;
62 dfsrr;
63 };
64
65 mdio@24520 {
66 #address-cells = <1>;
67 #size-cells = <0>;
68 device_type = "mdio";
69 compatible = "gianfar";
70 reg = <24520 20>;
71 linux,phandle = <24520>;
72 ethernet-phy@0 {
73 linux,phandle = <2452000>;
74 interrupt-parent = <40000>;
75 interrupts = <35 0>;
76 reg = <0>;
77 device_type = "ethernet-phy";
78 };
79 ethernet-phy@1 {
80 linux,phandle = <2452001>;
81 interrupt-parent = <40000>;
82 interrupts = <35 0>;
83 reg = <1>;
84 device_type = "ethernet-phy";
85 };
86
87 ethernet-phy@2 {
88 linux,phandle = <2452002>;
89 interrupt-parent = <40000>;
90 interrupts = <35 0>;
91 reg = <2>;
92 device_type = "ethernet-phy";
93 };
94 ethernet-phy@3 {
95 linux,phandle = <2452003>;
96 interrupt-parent = <40000>;
97 interrupts = <35 0>;
98 reg = <3>;
99 device_type = "ethernet-phy";
100 };
101 };
102
103 ethernet@24000 {
104 #address-cells = <1>;
105 #size-cells = <0>;
106 device_type = "network";
107 model = "eTSEC";
108 compatible = "gianfar";
109 reg = <24000 1000>;
110 local-mac-address = [ 00 E0 0C 00 73 00 ];
111 interrupts = <d 2 e 2 12 2>;
112 interrupt-parent = <40000>;
113 phy-handle = <2452000>;
114 };
115
116 ethernet@25000 {
117 #address-cells = <1>;
118 #size-cells = <0>;
119 device_type = "network";
120 model = "eTSEC";
121 compatible = "gianfar";
122 reg = <25000 1000>;
123 local-mac-address = [ 00 E0 0C 00 73 01 ];
124 interrupts = <13 2 14 2 18 2>;
125 interrupt-parent = <40000>;
126 phy-handle = <2452001>;
127 };
128
129 ethernet@26000 {
130 #address-cells = <1>;
131 #size-cells = <0>;
132 device_type = "network";
133 model = "eTSEC";
134 compatible = "gianfar";
135 reg = <26000 1000>;
136 local-mac-address = [ 00 E0 0C 00 73 02 ];
137 interrupts = <f 2 10 2 11 2>;
138 interrupt-parent = <40000>;
139 phy-handle = <2452001>;
140 };
141
142/* eTSEC 4 is currently broken
143 ethernet@27000 {
144 #address-cells = <1>;
145 #size-cells = <0>;
146 device_type = "network";
147 model = "eTSEC";
148 compatible = "gianfar";
149 reg = <27000 1000>;
150 local-mac-address = [ 00 E0 0C 00 73 03 ];
151 interrupts = <15 2 16 2 17 2>;
152 interrupt-parent = <40000>;
153 phy-handle = <2452001>;
154 };
155 */
156
157 serial@4500 {
158 device_type = "serial";
159 compatible = "ns16550";
160 reg = <4500 100>; // reg base, size
161 clock-frequency = <0>; // should we fill in in uboot?
162 interrupts = <1a 2>;
163 interrupt-parent = <40000>;
164 };
165
166 serial@4600 {
167 device_type = "serial";
168 compatible = "ns16550";
169 reg = <4600 100>; // reg base, size
170 clock-frequency = <0>; // should we fill in in uboot?
171 interrupts = <1a 2>;
172 interrupt-parent = <40000>;
173 };
174
175 pci@8000 {
176 linux,phandle = <8000>;
177 interrupt-map-mask = <1f800 0 0 7>;
178 interrupt-map = <
179
180 /* IDSEL 0x10 */
181 08000 0 0 1 40000 30 1
182 08000 0 0 2 40000 31 1
183 08000 0 0 3 40000 32 1
184 08000 0 0 4 40000 33 1
185
186 /* IDSEL 0x11 */
187 08800 0 0 1 40000 30 1
188 08800 0 0 2 40000 31 1
189 08800 0 0 3 40000 32 1
190 08800 0 0 4 40000 33 1
191
192 /* IDSEL 0x12 (Slot 1) */
193 09000 0 0 1 40000 30 1
194 09000 0 0 2 40000 31 1
195 09000 0 0 3 40000 32 1
196 09000 0 0 4 40000 33 1
197
198 /* IDSEL 0x13 (Slot 2) */
199 09800 0 0 1 40000 31 1
200 09800 0 0 2 40000 32 1
201 09800 0 0 3 40000 33 1
202 09800 0 0 4 40000 30 1
203
204 /* IDSEL 0x14 (Slot 3) */
205 0a000 0 0 1 40000 32 1
206 0a000 0 0 2 40000 33 1
207 0a000 0 0 3 40000 30 1
208 0a000 0 0 4 40000 31 1
209
210 /* IDSEL 0x15 (Slot 4) */
211 0a800 0 0 1 40000 33 1
212 0a800 0 0 2 40000 30 1
213 0a800 0 0 3 40000 31 1
214 0a800 0 0 4 40000 32 1
215
216 /* Bus 1 (Tundra Bridge) */
217 /* IDSEL 0x12 (ISA bridge) */
218 19000 0 0 1 40000 30 1
219 19000 0 0 2 40000 31 1
220 19000 0 0 3 40000 32 1
221 19000 0 0 4 40000 33 1>;
222 interrupt-parent = <40000>;
223 interrupts = <08 2>;
224 bus-range = <0 0>;
225 ranges = <02000000 0 80000000 80000000 0 20000000
226 01000000 0 00000000 e2000000 0 00100000>;
227 clock-frequency = <3f940aa>;
228 #interrupt-cells = <1>;
229 #size-cells = <2>;
230 #address-cells = <3>;
231 reg = <8000 1000>;
232 compatible = "85xx";
233 device_type = "pci";
234
235 i8259@19000 {
236 clock-frequency = <0>;
237 interrupt-controller;
238 device_type = "interrupt-controller";
239 reg = <19000 0 0 0 1>;
240 #address-cells = <0>;
241 #interrupt-cells = <2>;
242 built-in;
243 compatible = "chrp,iic";
244 big-endian;
245 interrupts = <1>;
246 interrupt-parent = <8000>;
247 };
248 };
249
250 pci@9000 {
251 linux,phandle = <9000>;
252 interrupt-map-mask = <f800 0 0 7>;
253 interrupt-map = <
254
255 /* IDSEL 0x15 */
256 a800 0 0 1 40000 3b 1
257 a800 0 0 2 40000 3b 1
258 a800 0 0 3 40000 3b 1
259 a800 0 0 4 40000 3b 1>;
260 interrupt-parent = <40000>;
261 interrupts = <09 2>;
262 bus-range = <0 0>;
263 ranges = <02000000 0 a0000000 a0000000 0 20000000
264 01000000 0 00000000 e3000000 0 00100000>;
265 clock-frequency = <3f940aa>;
266 #interrupt-cells = <1>;
267 #size-cells = <2>;
268 #address-cells = <3>;
269 reg = <9000 1000>;
270 compatible = "85xx";
271 device_type = "pci";
272 };
273
274 pic@40000 {
275 linux,phandle = <40000>;
276 clock-frequency = <0>;
277 interrupt-controller;
278 #address-cells = <0>;
279 #interrupt-cells = <2>;
280 reg = <40000 40000>;
281 built-in;
282 compatible = "chrp,open-pic";
283 device_type = "open-pic";
284 big-endian;
285 };
286 };
287};
diff --git a/arch/powerpc/boot/dts/mpc8555cds.dts b/arch/powerpc/boot/dts/mpc8555cds.dts
new file mode 100644
index 000000000000..118f5a887651
--- /dev/null
+++ b/arch/powerpc/boot/dts/mpc8555cds.dts
@@ -0,0 +1,244 @@
1/*
2 * MPC8555 CDS Device Tree Source
3 *
4 * Copyright 2006 Freescale Semiconductor Inc.
5 *
6 * This program is free software; you can redistribute it and/or modify it
7 * under the terms of the GNU General Public License as published by the
8 * Free Software Foundation; either version 2 of the License, or (at your
9 * option) any later version.
10 */
11
12
13/ {
14 model = "MPC8555CDS";
15 compatible = "MPC85xxCDS";
16 #address-cells = <1>;
17 #size-cells = <1>;
18 linux,phandle = <100>;
19
20 cpus {
21 #cpus = <1>;
22 #address-cells = <1>;
23 #size-cells = <0>;
24 linux,phandle = <200>;
25
26 PowerPC,8555@0 {
27 device_type = "cpu";
28 reg = <0>;
29 d-cache-line-size = <20>; // 32 bytes
30 i-cache-line-size = <20>; // 32 bytes
31 d-cache-size = <8000>; // L1, 32K
32 i-cache-size = <8000>; // L1, 32K
33 timebase-frequency = <0>; // 33 MHz, from uboot
34 bus-frequency = <0>; // 166 MHz
35 clock-frequency = <0>; // 825 MHz, from uboot
36 32-bit;
37 linux,phandle = <201>;
38 };
39 };
40
41 memory {
42 device_type = "memory";
43 linux,phandle = <300>;
44 reg = <00000000 08000000>; // 128M at 0x0
45 };
46
47 soc8555@e0000000 {
48 #address-cells = <1>;
49 #size-cells = <1>;
50 #interrupt-cells = <2>;
51 device_type = "soc";
52 ranges = <0 e0000000 00100000>;
53 reg = <e0000000 00100000>; // CCSRBAR 1M
54 bus-frequency = <0>;
55
56 i2c@3000 {
57 device_type = "i2c";
58 compatible = "fsl-i2c";
59 reg = <3000 100>;
60 interrupts = <1b 2>;
61 interrupt-parent = <40000>;
62 dfsrr;
63 };
64
65 mdio@24520 {
66 #address-cells = <1>;
67 #size-cells = <0>;
68 device_type = "mdio";
69 compatible = "gianfar";
70 reg = <24520 20>;
71 linux,phandle = <24520>;
72 ethernet-phy@0 {
73 linux,phandle = <2452000>;
74 interrupt-parent = <40000>;
75 interrupts = <35 0>;
76 reg = <0>;
77 device_type = "ethernet-phy";
78 };
79 ethernet-phy@1 {
80 linux,phandle = <2452001>;
81 interrupt-parent = <40000>;
82 interrupts = <35 0>;
83 reg = <1>;
84 device_type = "ethernet-phy";
85 };
86 };
87
88 ethernet@24000 {
89 #address-cells = <1>;
90 #size-cells = <0>;
91 device_type = "network";
92 model = "TSEC";
93 compatible = "gianfar";
94 reg = <24000 1000>;
95 local-mac-address = [ 00 E0 0C 00 73 00 ];
96 interrupts = <0d 2 0e 2 12 2>;
97 interrupt-parent = <40000>;
98 phy-handle = <2452000>;
99 };
100
101 ethernet@25000 {
102 #address-cells = <1>;
103 #size-cells = <0>;
104 device_type = "network";
105 model = "TSEC";
106 compatible = "gianfar";
107 reg = <25000 1000>;
108 local-mac-address = [ 00 E0 0C 00 73 01 ];
109 interrupts = <13 2 14 2 18 2>;
110 interrupt-parent = <40000>;
111 phy-handle = <2452001>;
112 };
113
114 serial@4500 {
115 device_type = "serial";
116 compatible = "ns16550";
117 reg = <4500 100>; // reg base, size
118 clock-frequency = <0>; // should we fill in in uboot?
119 interrupts = <1a 2>;
120 interrupt-parent = <40000>;
121 };
122
123 serial@4600 {
124 device_type = "serial";
125 compatible = "ns16550";
126 reg = <4600 100>; // reg base, size
127 clock-frequency = <0>; // should we fill in in uboot?
128 interrupts = <1a 2>;
129 interrupt-parent = <40000>;
130 };
131
132 pci@8000 {
133 linux,phandle = <8000>;
134 interrupt-map-mask = <1f800 0 0 7>;
135 interrupt-map = <
136
137 /* IDSEL 0x10 */
138 08000 0 0 1 40000 30 1
139 08000 0 0 2 40000 31 1
140 08000 0 0 3 40000 32 1
141 08000 0 0 4 40000 33 1
142
143 /* IDSEL 0x11 */
144 08800 0 0 1 40000 30 1
145 08800 0 0 2 40000 31 1
146 08800 0 0 3 40000 32 1
147 08800 0 0 4 40000 33 1
148
149 /* IDSEL 0x12 (Slot 1) */
150 09000 0 0 1 40000 30 1
151 09000 0 0 2 40000 31 1
152 09000 0 0 3 40000 32 1
153 09000 0 0 4 40000 33 1
154
155 /* IDSEL 0x13 (Slot 2) */
156 09800 0 0 1 40000 31 1
157 09800 0 0 2 40000 32 1
158 09800 0 0 3 40000 33 1
159 09800 0 0 4 40000 30 1
160
161 /* IDSEL 0x14 (Slot 3) */
162 0a000 0 0 1 40000 32 1
163 0a000 0 0 2 40000 33 1
164 0a000 0 0 3 40000 30 1
165 0a000 0 0 4 40000 31 1
166
167 /* IDSEL 0x15 (Slot 4) */
168 0a800 0 0 1 40000 33 1
169 0a800 0 0 2 40000 30 1
170 0a800 0 0 3 40000 31 1
171 0a800 0 0 4 40000 32 1
172
173 /* Bus 1 (Tundra Bridge) */
174 /* IDSEL 0x12 (ISA bridge) */
175 19000 0 0 1 40000 30 1
176 19000 0 0 2 40000 31 1
177 19000 0 0 3 40000 32 1
178 19000 0 0 4 40000 33 1>;
179 interrupt-parent = <40000>;
180 interrupts = <08 2>;
181 bus-range = <0 0>;
182 ranges = <02000000 0 80000000 80000000 0 20000000
183 01000000 0 00000000 e2000000 0 00100000>;
184 clock-frequency = <3f940aa>;
185 #interrupt-cells = <1>;
186 #size-cells = <2>;
187 #address-cells = <3>;
188 reg = <8000 1000>;
189 compatible = "85xx";
190 device_type = "pci";
191
192 i8259@19000 {
193 clock-frequency = <0>;
194 interrupt-controller;
195 device_type = "interrupt-controller";
196 reg = <19000 0 0 0 1>;
197 #address-cells = <0>;
198 #interrupt-cells = <2>;
199 built-in;
200 compatible = "chrp,iic";
201 big-endian;
202 interrupts = <1>;
203 interrupt-parent = <8000>;
204 };
205 };
206
207 pci@9000 {
208 linux,phandle = <9000>;
209 interrupt-map-mask = <f800 0 0 7>;
210 interrupt-map = <
211
212 /* IDSEL 0x15 */
213 a800 0 0 1 40000 3b 1
214 a800 0 0 2 40000 3b 1
215 a800 0 0 3 40000 3b 1
216 a800 0 0 4 40000 3b 1>;
217 interrupt-parent = <40000>;
218 interrupts = <09 2>;
219 bus-range = <0 0>;
220 ranges = <02000000 0 a0000000 a0000000 0 20000000
221 01000000 0 00000000 e3000000 0 00100000>;
222 clock-frequency = <3f940aa>;
223 #interrupt-cells = <1>;
224 #size-cells = <2>;
225 #address-cells = <3>;
226 reg = <9000 1000>;
227 compatible = "85xx";
228 device_type = "pci";
229 };
230
231 pic@40000 {
232 linux,phandle = <40000>;
233 clock-frequency = <0>;
234 interrupt-controller;
235 #address-cells = <0>;
236 #interrupt-cells = <2>;
237 reg = <40000 40000>;
238 built-in;
239 compatible = "chrp,open-pic";
240 device_type = "open-pic";
241 big-endian;
242 };
243 };
244};
diff --git a/arch/powerpc/kernel/legacy_serial.c b/arch/powerpc/kernel/legacy_serial.c
index 359ab89748e0..40a39291861f 100644
--- a/arch/powerpc/kernel/legacy_serial.c
+++ b/arch/powerpc/kernel/legacy_serial.c
@@ -115,6 +115,7 @@ static int __init add_legacy_soc_port(struct device_node *np,
115 u64 addr; 115 u64 addr;
116 u32 *addrp; 116 u32 *addrp;
117 upf_t flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_SHARE_IRQ; 117 upf_t flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_SHARE_IRQ;
118 struct device_node *tsi = of_get_parent(np);
118 119
119 /* We only support ports that have a clock frequency properly 120 /* We only support ports that have a clock frequency properly
120 * encoded in the device-tree. 121 * encoded in the device-tree.
@@ -134,7 +135,10 @@ static int __init add_legacy_soc_port(struct device_node *np,
134 /* Add port, irq will be dealt with later. We passed a translated 135 /* Add port, irq will be dealt with later. We passed a translated
135 * IO port value. It will be fixed up later along with the irq 136 * IO port value. It will be fixed up later along with the irq
136 */ 137 */
137 return add_legacy_port(np, -1, UPIO_MEM, addr, addr, NO_IRQ, flags, 0); 138 if (tsi && !strcmp(tsi->type, "tsi-bridge"))
139 return add_legacy_port(np, -1, UPIO_TSI, addr, addr, NO_IRQ, flags, 0);
140 else
141 return add_legacy_port(np, -1, UPIO_MEM, addr, addr, NO_IRQ, flags, 0);
138} 142}
139 143
140static int __init add_legacy_isa_port(struct device_node *np, 144static int __init add_legacy_isa_port(struct device_node *np,
@@ -464,7 +468,7 @@ static int __init serial_dev_init(void)
464 fixup_port_irq(i, np, port); 468 fixup_port_irq(i, np, port);
465 if (port->iotype == UPIO_PORT) 469 if (port->iotype == UPIO_PORT)
466 fixup_port_pio(i, np, port); 470 fixup_port_pio(i, np, port);
467 if (port->iotype == UPIO_MEM) 471 if ((port->iotype == UPIO_MEM) || (port->iotype == UPIO_TSI))
468 fixup_port_mmio(i, np, port); 472 fixup_port_mmio(i, np, port);
469 } 473 }
470 474
diff --git a/arch/powerpc/kernel/prom_parse.c b/arch/powerpc/kernel/prom_parse.c
index 6a7e997c401d..11052c212ad5 100644
--- a/arch/powerpc/kernel/prom_parse.c
+++ b/arch/powerpc/kernel/prom_parse.c
@@ -598,11 +598,6 @@ static struct device_node *of_irq_find_parent(struct device_node *child)
598 return p; 598 return p;
599} 599}
600 600
601static u8 of_irq_pci_swizzle(u8 slot, u8 pin)
602{
603 return (((pin - 1) + slot) % 4) + 1;
604}
605
606/* This doesn't need to be called if you don't have any special workaround 601/* This doesn't need to be called if you don't have any special workaround
607 * flags to pass 602 * flags to pass
608 */ 603 */
@@ -891,6 +886,12 @@ int of_irq_map_one(struct device_node *device, int index, struct of_irq *out_irq
891} 886}
892EXPORT_SYMBOL_GPL(of_irq_map_one); 887EXPORT_SYMBOL_GPL(of_irq_map_one);
893 888
889#ifdef CONFIG_PCI
890static u8 of_irq_pci_swizzle(u8 slot, u8 pin)
891{
892 return (((pin - 1) + slot) % 4) + 1;
893}
894
894int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq) 895int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq)
895{ 896{
896 struct device_node *dn, *ppnode; 897 struct device_node *dn, *ppnode;
@@ -967,4 +968,4 @@ int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq)
967 return of_irq_map_raw(ppnode, &lspec, laddr, out_irq); 968 return of_irq_map_raw(ppnode, &lspec, laddr, out_irq);
968} 969}
969EXPORT_SYMBOL_GPL(of_irq_map_pci); 970EXPORT_SYMBOL_GPL(of_irq_map_pci);
970 971#endif /* CONFIG_PCI */
diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c
index 774c0a3c5019..18e59e43d2b3 100644
--- a/arch/powerpc/kernel/time.c
+++ b/arch/powerpc/kernel/time.c
@@ -417,7 +417,7 @@ static __inline__ void timer_check_rtc(void)
417/* 417/*
418 * This version of gettimeofday has microsecond resolution. 418 * This version of gettimeofday has microsecond resolution.
419 */ 419 */
420static inline void __do_gettimeofday(struct timeval *tv, u64 tb_val) 420static inline void __do_gettimeofday(struct timeval *tv)
421{ 421{
422 unsigned long sec, usec; 422 unsigned long sec, usec;
423 u64 tb_ticks, xsec; 423 u64 tb_ticks, xsec;
@@ -431,7 +431,12 @@ static inline void __do_gettimeofday(struct timeval *tv, u64 tb_val)
431 * without a divide (and in fact, without a multiply) 431 * without a divide (and in fact, without a multiply)
432 */ 432 */
433 temp_varp = do_gtod.varp; 433 temp_varp = do_gtod.varp;
434 tb_ticks = tb_val - temp_varp->tb_orig_stamp; 434
435 /* Sampling the time base must be done after loading
436 * do_gtod.varp in order to avoid racing with update_gtod.
437 */
438 data_barrier(temp_varp);
439 tb_ticks = get_tb() - temp_varp->tb_orig_stamp;
435 temp_tb_to_xs = temp_varp->tb_to_xs; 440 temp_tb_to_xs = temp_varp->tb_to_xs;
436 temp_stamp_xsec = temp_varp->stamp_xsec; 441 temp_stamp_xsec = temp_varp->stamp_xsec;
437 xsec = temp_stamp_xsec + mulhdu(tb_ticks, temp_tb_to_xs); 442 xsec = temp_stamp_xsec + mulhdu(tb_ticks, temp_tb_to_xs);
@@ -464,7 +469,7 @@ void do_gettimeofday(struct timeval *tv)
464 tv->tv_usec = usec; 469 tv->tv_usec = usec;
465 return; 470 return;
466 } 471 }
467 __do_gettimeofday(tv, get_tb()); 472 __do_gettimeofday(tv);
468} 473}
469 474
470EXPORT_SYMBOL(do_gettimeofday); 475EXPORT_SYMBOL(do_gettimeofday);
@@ -650,6 +655,7 @@ void timer_interrupt(struct pt_regs * regs)
650 int next_dec; 655 int next_dec;
651 int cpu = smp_processor_id(); 656 int cpu = smp_processor_id();
652 unsigned long ticks; 657 unsigned long ticks;
658 u64 tb_next_jiffy;
653 659
654#ifdef CONFIG_PPC32 660#ifdef CONFIG_PPC32
655 if (atomic_read(&ppc_n_lost_interrupts) != 0) 661 if (atomic_read(&ppc_n_lost_interrupts) != 0)
@@ -691,11 +697,14 @@ void timer_interrupt(struct pt_regs * regs)
691 continue; 697 continue;
692 698
693 write_seqlock(&xtime_lock); 699 write_seqlock(&xtime_lock);
694 tb_last_jiffy += tb_ticks_per_jiffy; 700 tb_next_jiffy = tb_last_jiffy + tb_ticks_per_jiffy;
695 tb_last_stamp = per_cpu(last_jiffy, cpu); 701 if (per_cpu(last_jiffy, cpu) >= tb_next_jiffy) {
696 do_timer(regs); 702 tb_last_jiffy = tb_next_jiffy;
697 timer_recalc_offset(tb_last_jiffy); 703 tb_last_stamp = per_cpu(last_jiffy, cpu);
698 timer_check_rtc(); 704 do_timer(regs);
705 timer_recalc_offset(tb_last_jiffy);
706 timer_check_rtc();
707 }
699 write_sequnlock(&xtime_lock); 708 write_sequnlock(&xtime_lock);
700 } 709 }
701 710
diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c
index e4d1713e8aea..9b352bd0a460 100644
--- a/arch/powerpc/kernel/traps.c
+++ b/arch/powerpc/kernel/traps.c
@@ -585,14 +585,14 @@ static void parse_fpe(struct pt_regs *regs)
585#define INST_MFSPR_PVR_MASK 0xfc1fffff 585#define INST_MFSPR_PVR_MASK 0xfc1fffff
586 586
587#define INST_DCBA 0x7c0005ec 587#define INST_DCBA 0x7c0005ec
588#define INST_DCBA_MASK 0x7c0007fe 588#define INST_DCBA_MASK 0xfc0007fe
589 589
590#define INST_MCRXR 0x7c000400 590#define INST_MCRXR 0x7c000400
591#define INST_MCRXR_MASK 0x7c0007fe 591#define INST_MCRXR_MASK 0xfc0007fe
592 592
593#define INST_STRING 0x7c00042a 593#define INST_STRING 0x7c00042a
594#define INST_STRING_MASK 0x7c0007fe 594#define INST_STRING_MASK 0xfc0007fe
595#define INST_STRING_GEN_MASK 0x7c00067e 595#define INST_STRING_GEN_MASK 0xfc00067e
596#define INST_LSWI 0x7c0004aa 596#define INST_LSWI 0x7c0004aa
597#define INST_LSWX 0x7c00042a 597#define INST_LSWX 0x7c00042a
598#define INST_STSWI 0x7c0005aa 598#define INST_STSWI 0x7c0005aa
diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c
index 266b8b2ceac9..5615acc29527 100644
--- a/arch/powerpc/mm/hugetlbpage.c
+++ b/arch/powerpc/mm/hugetlbpage.c
@@ -153,7 +153,7 @@ static void free_hugepte_range(struct mmu_gather *tlb, hugepd_t *hpdp)
153 hpdp->pd = 0; 153 hpdp->pd = 0;
154 tlb->need_flush = 1; 154 tlb->need_flush = 1;
155 pgtable_free_tlb(tlb, pgtable_free_cache(hugepte, HUGEPTE_CACHE_NUM, 155 pgtable_free_tlb(tlb, pgtable_free_cache(hugepte, HUGEPTE_CACHE_NUM,
156 HUGEPTE_TABLE_SIZE-1)); 156 PGF_CACHENUM_MASK));
157} 157}
158 158
159#ifdef CONFIG_PPC_64K_PAGES 159#ifdef CONFIG_PPC_64K_PAGES
diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig
index 454fc53289ab..c3268d9877e4 100644
--- a/arch/powerpc/platforms/85xx/Kconfig
+++ b/arch/powerpc/platforms/85xx/Kconfig
@@ -14,7 +14,6 @@ config MPC8540_ADS
14config MPC85xx_CDS 14config MPC85xx_CDS
15 bool "Freescale MPC85xx CDS" 15 bool "Freescale MPC85xx CDS"
16 select DEFAULT_UIMAGE 16 select DEFAULT_UIMAGE
17 select PPC_I8259 if PCI
18 help 17 help
19 This option enables support for the MPC85xx CDS board 18 This option enables support for the MPC85xx CDS board
20 19
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ads.c b/arch/powerpc/platforms/85xx/mpc85xx_ads.c
index 06a497676c99..9d2acfbbeccd 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_ads.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_ads.c
@@ -37,79 +37,7 @@ unsigned long isa_io_base = 0;
37unsigned long isa_mem_base = 0; 37unsigned long isa_mem_base = 0;
38#endif 38#endif
39 39
40/*
41 * Internal interrupts are all Level Sensitive, and Positive Polarity
42 *
43 * Note: Likely, this table and the following function should be
44 * obtained and derived from the OF Device Tree.
45 */
46static u_char mpc85xx_ads_openpic_initsenses[] __initdata = {
47 MPC85XX_INTERNAL_IRQ_SENSES,
48 0x0, /* External 0: */
49#if defined(CONFIG_PCI)
50 (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext 1: PCI slot 0 */
51 (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext 2: PCI slot 1 */
52 (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext 3: PCI slot 2 */
53 (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext 4: PCI slot 3 */
54#else
55 0x0, /* External 1: */
56 0x0, /* External 2: */
57 0x0, /* External 3: */
58 0x0, /* External 4: */
59#endif
60 (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 5: PHY */
61 0x0, /* External 6: */
62 (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 7: PHY */
63 0x0, /* External 8: */
64 0x0, /* External 9: */
65 0x0, /* External 10: */
66 0x0, /* External 11: */
67};
68
69#ifdef CONFIG_PCI 40#ifdef CONFIG_PCI
70/*
71 * interrupt routing
72 */
73
74int
75mpc85xx_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
76{
77 static char pci_irq_table[][4] =
78 /*
79 * This is little evil, but works around the fact
80 * that revA boards have IDSEL starting at 18
81 * and others boards (older) start at 12
82 *
83 * PCI IDSEL/INTPIN->INTLINE
84 * A B C D
85 */
86 {
87 {PIRQA, PIRQB, PIRQC, PIRQD}, /* IDSEL 2 */
88 {PIRQD, PIRQA, PIRQB, PIRQC},
89 {PIRQC, PIRQD, PIRQA, PIRQB},
90 {PIRQB, PIRQC, PIRQD, PIRQA}, /* IDSEL 5 */
91 {0, 0, 0, 0}, /* -- */
92 {0, 0, 0, 0}, /* -- */
93 {0, 0, 0, 0}, /* -- */
94 {0, 0, 0, 0}, /* -- */
95 {0, 0, 0, 0}, /* -- */
96 {0, 0, 0, 0}, /* -- */
97 {PIRQA, PIRQB, PIRQC, PIRQD}, /* IDSEL 12 */
98 {PIRQD, PIRQA, PIRQB, PIRQC},
99 {PIRQC, PIRQD, PIRQA, PIRQB},
100 {PIRQB, PIRQC, PIRQD, PIRQA}, /* IDSEL 15 */
101 {0, 0, 0, 0}, /* -- */
102 {0, 0, 0, 0}, /* -- */
103 {PIRQA, PIRQB, PIRQC, PIRQD}, /* IDSEL 18 */
104 {PIRQD, PIRQA, PIRQB, PIRQC},
105 {PIRQC, PIRQD, PIRQA, PIRQB},
106 {PIRQB, PIRQC, PIRQD, PIRQA}, /* IDSEL 21 */
107 };
108
109 const long min_idsel = 2, max_idsel = 21, irqs_per_slot = 4;
110 return PCI_IRQ_TABLE_LOOKUP;
111}
112
113int 41int
114mpc85xx_exclude_device(u_char bus, u_char devfn) 42mpc85xx_exclude_device(u_char bus, u_char devfn)
115{ 43{
@@ -119,44 +47,63 @@ mpc85xx_exclude_device(u_char bus, u_char devfn)
119 return PCIBIOS_SUCCESSFUL; 47 return PCIBIOS_SUCCESSFUL;
120} 48}
121 49
50void __init
51mpc85xx_pcibios_fixup(void)
52{
53 struct pci_dev *dev = NULL;
54
55 for_each_pci_dev(dev)
56 pci_read_irq_line(dev);
57}
122#endif /* CONFIG_PCI */ 58#endif /* CONFIG_PCI */
123 59
124 60
125void __init mpc85xx_ads_pic_init(void) 61void __init mpc85xx_ads_pic_init(void)
126{ 62{
127 struct mpic *mpic1; 63 struct mpic *mpic;
128 phys_addr_t OpenPIC_PAddr; 64 struct resource r;
129 65 struct device_node *np = NULL;
130 /* Determine the Physical Address of the OpenPIC regs */ 66
131 OpenPIC_PAddr = get_immrbase() + MPC85xx_OPENPIC_OFFSET; 67 np = of_find_node_by_type(np, "open-pic");
132 68
133 mpic1 = mpic_alloc(OpenPIC_PAddr, 69 if (np == NULL) {
134 MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN, 70 printk(KERN_ERR "Could not find open-pic node\n");
135 4, MPC85xx_OPENPIC_IRQ_OFFSET, 0, 250, 71 return;
136 mpc85xx_ads_openpic_initsenses, 72 }
137 sizeof(mpc85xx_ads_openpic_initsenses), 73
138 " OpenPIC "); 74 if(of_address_to_resource(np, 0, &r)) {
139 BUG_ON(mpic1 == NULL); 75 printk(KERN_ERR "Could not map mpic register space\n");
140 mpic_assign_isu(mpic1, 0, OpenPIC_PAddr + 0x10200); 76 of_node_put(np);
141 mpic_assign_isu(mpic1, 1, OpenPIC_PAddr + 0x10280); 77 return;
142 mpic_assign_isu(mpic1, 2, OpenPIC_PAddr + 0x10300); 78 }
143 mpic_assign_isu(mpic1, 3, OpenPIC_PAddr + 0x10380); 79
144 mpic_assign_isu(mpic1, 4, OpenPIC_PAddr + 0x10400); 80 mpic = mpic_alloc(np, r.start,
145 mpic_assign_isu(mpic1, 5, OpenPIC_PAddr + 0x10480); 81 MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
146 mpic_assign_isu(mpic1, 6, OpenPIC_PAddr + 0x10500); 82 4, 0, " OpenPIC ");
147 mpic_assign_isu(mpic1, 7, OpenPIC_PAddr + 0x10580); 83 BUG_ON(mpic == NULL);
148 84 of_node_put(np);
149 /* dummy mappings to get to 48 */ 85
150 mpic_assign_isu(mpic1, 8, OpenPIC_PAddr + 0x10600); 86 mpic_assign_isu(mpic, 0, r.start + 0x10200);
151 mpic_assign_isu(mpic1, 9, OpenPIC_PAddr + 0x10680); 87 mpic_assign_isu(mpic, 1, r.start + 0x10280);
152 mpic_assign_isu(mpic1, 10, OpenPIC_PAddr + 0x10700); 88 mpic_assign_isu(mpic, 2, r.start + 0x10300);
153 mpic_assign_isu(mpic1, 11, OpenPIC_PAddr + 0x10780); 89 mpic_assign_isu(mpic, 3, r.start + 0x10380);
154 90 mpic_assign_isu(mpic, 4, r.start + 0x10400);
155 /* External ints */ 91 mpic_assign_isu(mpic, 5, r.start + 0x10480);
156 mpic_assign_isu(mpic1, 12, OpenPIC_PAddr + 0x10000); 92 mpic_assign_isu(mpic, 6, r.start + 0x10500);
157 mpic_assign_isu(mpic1, 13, OpenPIC_PAddr + 0x10080); 93 mpic_assign_isu(mpic, 7, r.start + 0x10580);
158 mpic_assign_isu(mpic1, 14, OpenPIC_PAddr + 0x10100); 94
159 mpic_init(mpic1); 95 /* Unused on this platform (leave room for 8548) */
96 mpic_assign_isu(mpic, 8, r.start + 0x10600);
97 mpic_assign_isu(mpic, 9, r.start + 0x10680);
98 mpic_assign_isu(mpic, 10, r.start + 0x10700);
99 mpic_assign_isu(mpic, 11, r.start + 0x10780);
100
101 /* External Interrupts */
102 mpic_assign_isu(mpic, 12, r.start + 0x10000);
103 mpic_assign_isu(mpic, 13, r.start + 0x10080);
104 mpic_assign_isu(mpic, 14, r.start + 0x10100);
105
106 mpic_init(mpic);
160} 107}
161 108
162/* 109/*
@@ -165,7 +112,9 @@ void __init mpc85xx_ads_pic_init(void)
165static void __init mpc85xx_ads_setup_arch(void) 112static void __init mpc85xx_ads_setup_arch(void)
166{ 113{
167 struct device_node *cpu; 114 struct device_node *cpu;
115#ifdef CONFIG_PCI
168 struct device_node *np; 116 struct device_node *np;
117#endif
169 118
170 if (ppc_md.progress) 119 if (ppc_md.progress)
171 ppc_md.progress("mpc85xx_ads_setup_arch()", 0); 120 ppc_md.progress("mpc85xx_ads_setup_arch()", 0);
@@ -186,8 +135,7 @@ static void __init mpc85xx_ads_setup_arch(void)
186 for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;) 135 for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;)
187 add_bridge(np); 136 add_bridge(np);
188 137
189 ppc_md.pci_swizzle = common_swizzle; 138 ppc_md.pcibios_fixup = mpc85xx_pcibios_fixup;
190 ppc_md.pci_map_irq = mpc85xx_map_irq;
191 ppc_md.pci_exclude_device = mpc85xx_exclude_device; 139 ppc_md.pci_exclude_device = mpc85xx_exclude_device;
192#endif 140#endif
193 141
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_cds.c b/arch/powerpc/platforms/85xx/mpc85xx_cds.c
index 18e6e11f7020..1d357d32a29f 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_cds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_cds.c
@@ -57,94 +57,8 @@ unsigned long isa_mem_base = 0;
57static int cds_pci_slot = 2; 57static int cds_pci_slot = 2;
58static volatile u8 *cadmus; 58static volatile u8 *cadmus;
59 59
60/*
61 * Internal interrupts are all Level Sensitive, and Positive Polarity
62 *
63 * Note: Likely, this table and the following function should be
64 * obtained and derived from the OF Device Tree.
65 */
66static u_char mpc85xx_cds_openpic_initsenses[] __initdata = {
67 MPC85XX_INTERNAL_IRQ_SENSES,
68#if defined(CONFIG_PCI)
69 (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Ext 0: PCI slot 0 */
70 (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext 1: PCI slot 1 */
71 (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext 2: PCI slot 2 */
72 (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext 3: PCI slot 3 */
73#else
74 0x0, /* External 0: */
75 0x0, /* External 1: */
76 0x0, /* External 2: */
77 0x0, /* External 3: */
78#endif
79 (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 5: PHY */
80 0x0, /* External 6: */
81 0x0, /* External 7: */
82 0x0, /* External 8: */
83 0x0, /* External 9: */
84 0x0, /* External 10: */
85#ifdef CONFIG_PCI
86 (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext 11: PCI2 slot 0 */
87#else
88 0x0, /* External 11: */
89#endif
90};
91
92 60
93#ifdef CONFIG_PCI 61#ifdef CONFIG_PCI
94/*
95 * interrupt routing
96 */
97int
98mpc85xx_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
99{
100 struct pci_controller *hose = pci_bus_to_hose(dev->bus->number);
101
102 if (!hose->index)
103 {
104 /* Handle PCI1 interrupts */
105 char pci_irq_table[][4] =
106 /*
107 * PCI IDSEL/INTPIN->INTLINE
108 * A B C D
109 */
110
111 /* Note IRQ assignment for slots is based on which slot the elysium is
112 * in -- in this setup elysium is in slot #2 (this PIRQA as first
113 * interrupt on slot */
114 {
115 { 0, 1, 2, 3 }, /* 16 - PMC */
116 { 0, 1, 2, 3 }, /* 17 P2P (Tsi320) */
117 { 0, 1, 2, 3 }, /* 18 - Slot 1 */
118 { 1, 2, 3, 0 }, /* 19 - Slot 2 */
119 { 2, 3, 0, 1 }, /* 20 - Slot 3 */
120 { 3, 0, 1, 2 }, /* 21 - Slot 4 */
121 };
122
123 const long min_idsel = 16, max_idsel = 21, irqs_per_slot = 4;
124 int i, j;
125
126 for (i = 0; i < 6; i++)
127 for (j = 0; j < 4; j++)
128 pci_irq_table[i][j] =
129 ((pci_irq_table[i][j] + 5 -
130 cds_pci_slot) & 0x3) + PIRQ0A;
131
132 return PCI_IRQ_TABLE_LOOKUP;
133 } else {
134 /* Handle PCI2 interrupts (if we have one) */
135 char pci_irq_table[][4] =
136 {
137 /*
138 * We only have one slot and one interrupt
139 * going to PIRQA - PIRQD */
140 { PIRQ1A, PIRQ1A, PIRQ1A, PIRQ1A }, /* 21 - slot 0 */
141 };
142
143 const long min_idsel = 21, max_idsel = 21, irqs_per_slot = 4;
144
145 return PCI_IRQ_TABLE_LOOKUP;
146 }
147}
148 62
149#define ARCADIA_HOST_BRIDGE_IDSEL 17 63#define ARCADIA_HOST_BRIDGE_IDSEL 17
150#define ARCADIA_2ND_BRIDGE_IDSEL 3 64#define ARCADIA_2ND_BRIDGE_IDSEL 3
@@ -210,50 +124,104 @@ mpc85xx_cds_pcibios_fixup(void)
210 pci_write_config_byte(dev, PCI_INTERRUPT_LINE, 11); 124 pci_write_config_byte(dev, PCI_INTERRUPT_LINE, 11);
211 pci_dev_put(dev); 125 pci_dev_put(dev);
212 } 126 }
127
128 /* Now map all the PCI irqs */
129 dev = NULL;
130 for_each_pci_dev(dev)
131 pci_read_irq_line(dev);
132}
133
134#ifdef CONFIG_PPC_I8259
135#warning The i8259 PIC support is currently broken
136static void mpc85xx_8259_cascade(unsigned int irq, struct
137 irq_desc *desc, struct pt_regs *regs)
138{
139 unsigned int cascade_irq = i8259_irq(regs);
140
141 if (cascade_irq != NO_IRQ)
142 generic_handle_irq(cascade_irq, regs);
143
144 desc->chip->eoi(irq);
213} 145}
146#endif /* PPC_I8259 */
214#endif /* CONFIG_PCI */ 147#endif /* CONFIG_PCI */
215 148
216void __init mpc85xx_cds_pic_init(void) 149void __init mpc85xx_cds_pic_init(void)
217{ 150{
218 struct mpic *mpic1; 151 struct mpic *mpic;
219 phys_addr_t OpenPIC_PAddr; 152 struct resource r;
153 struct device_node *np = NULL;
154 struct device_node *cascade_node = NULL;
155 int cascade_irq;
220 156
221 /* Determine the Physical Address of the OpenPIC regs */ 157 np = of_find_node_by_type(np, "open-pic");
222 OpenPIC_PAddr = get_immrbase() + MPC85xx_OPENPIC_OFFSET; 158
159 if (np == NULL) {
160 printk(KERN_ERR "Could not find open-pic node\n");
161 return;
162 }
223 163
224 mpic1 = mpic_alloc(OpenPIC_PAddr, 164 if (of_address_to_resource(np, 0, &r)) {
165 printk(KERN_ERR "Failed to map mpic register space\n");
166 of_node_put(np);
167 return;
168 }
169
170 mpic = mpic_alloc(np, r.start,
225 MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN, 171 MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
226 4, MPC85xx_OPENPIC_IRQ_OFFSET, 0, 250, 172 4, 0, " OpenPIC ");
227 mpc85xx_cds_openpic_initsenses, 173 BUG_ON(mpic == NULL);
228 sizeof(mpc85xx_cds_openpic_initsenses), " OpenPIC "); 174
229 BUG_ON(mpic1 == NULL); 175 /* Return the mpic node */
230 mpic_assign_isu(mpic1, 0, OpenPIC_PAddr + 0x10200); 176 of_node_put(np);
231 mpic_assign_isu(mpic1, 1, OpenPIC_PAddr + 0x10280); 177
232 mpic_assign_isu(mpic1, 2, OpenPIC_PAddr + 0x10300); 178 mpic_assign_isu(mpic, 0, r.start + 0x10200);
233 mpic_assign_isu(mpic1, 3, OpenPIC_PAddr + 0x10380); 179 mpic_assign_isu(mpic, 1, r.start + 0x10280);
234 mpic_assign_isu(mpic1, 4, OpenPIC_PAddr + 0x10400); 180 mpic_assign_isu(mpic, 2, r.start + 0x10300);
235 mpic_assign_isu(mpic1, 5, OpenPIC_PAddr + 0x10480); 181 mpic_assign_isu(mpic, 3, r.start + 0x10380);
236 mpic_assign_isu(mpic1, 6, OpenPIC_PAddr + 0x10500); 182 mpic_assign_isu(mpic, 4, r.start + 0x10400);
237 mpic_assign_isu(mpic1, 7, OpenPIC_PAddr + 0x10580); 183 mpic_assign_isu(mpic, 5, r.start + 0x10480);
238 184 mpic_assign_isu(mpic, 6, r.start + 0x10500);
239 /* dummy mappings to get to 48 */ 185 mpic_assign_isu(mpic, 7, r.start + 0x10580);
240 mpic_assign_isu(mpic1, 8, OpenPIC_PAddr + 0x10600); 186
241 mpic_assign_isu(mpic1, 9, OpenPIC_PAddr + 0x10680); 187 /* Used only for 8548 so far, but no harm in
242 mpic_assign_isu(mpic1, 10, OpenPIC_PAddr + 0x10700); 188 * allocating them for everyone */
243 mpic_assign_isu(mpic1, 11, OpenPIC_PAddr + 0x10780); 189 mpic_assign_isu(mpic, 8, r.start + 0x10600);
244 190 mpic_assign_isu(mpic, 9, r.start + 0x10680);
245 /* External ints */ 191 mpic_assign_isu(mpic, 10, r.start + 0x10700);
246 mpic_assign_isu(mpic1, 12, OpenPIC_PAddr + 0x10000); 192 mpic_assign_isu(mpic, 11, r.start + 0x10780);
247 mpic_assign_isu(mpic1, 13, OpenPIC_PAddr + 0x10080); 193
248 mpic_assign_isu(mpic1, 14, OpenPIC_PAddr + 0x10100); 194 /* External Interrupts */
249 195 mpic_assign_isu(mpic, 12, r.start + 0x10000);
250 mpic_init(mpic1); 196 mpic_assign_isu(mpic, 13, r.start + 0x10080);
197 mpic_assign_isu(mpic, 14, r.start + 0x10100);
198
199 mpic_init(mpic);
200
201#ifdef CONFIG_PPC_I8259
202 /* Initialize the i8259 controller */
203 for_each_node_by_type(np, "interrupt-controller")
204 if (device_is_compatible(np, "chrp,iic")) {
205 cascade_node = np;
206 break;
207 }
208
209 if (cascade_node == NULL) {
210 printk(KERN_DEBUG "Could not find i8259 PIC\n");
211 return;
212 }
251 213
252#ifdef CONFIG_PCI 214 cascade_irq = irq_of_parse_and_map(cascade_node, 0);
253 mpic_setup_cascade(PIRQ0A, i8259_irq_cascade, NULL); 215 if (cascade_irq == NO_IRQ) {
216 printk(KERN_ERR "Failed to map cascade interrupt\n");
217 return;
218 }
254 219
255 i8259_init(0,0); 220 i8259_init(cascade_node, 0);
256#endif 221 of_node_put(cascade_node);
222
223 set_irq_chained_handler(cascade_irq, mpc85xx_8259_cascade);
224#endif /* CONFIG_PPC_I8259 */
257} 225}
258 226
259 227
@@ -298,8 +266,6 @@ mpc85xx_cds_setup_arch(void)
298 add_bridge(np); 266 add_bridge(np);
299 267
300 ppc_md.pcibios_fixup = mpc85xx_cds_pcibios_fixup; 268 ppc_md.pcibios_fixup = mpc85xx_cds_pcibios_fixup;
301 ppc_md.pci_swizzle = common_swizzle;
302 ppc_md.pci_map_irq = mpc85xx_map_irq;
303 ppc_md.pci_exclude_device = mpc85xx_exclude_device; 269 ppc_md.pci_exclude_device = mpc85xx_exclude_device;
304#endif 270#endif
305 271
diff --git a/arch/powerpc/platforms/86xx/mpc8641_hpcn.h b/arch/powerpc/platforms/86xx/mpc8641_hpcn.h
index 5d2bcf78cef7..41e554c4af94 100644
--- a/arch/powerpc/platforms/86xx/mpc8641_hpcn.h
+++ b/arch/powerpc/platforms/86xx/mpc8641_hpcn.h
@@ -16,38 +16,6 @@
16 16
17#include <linux/init.h> 17#include <linux/init.h>
18 18
19/* PCI interrupt controller */
20#define PIRQA 3
21#define PIRQB 4
22#define PIRQC 5
23#define PIRQD 6
24#define PIRQ7 7
25#define PIRQE 9
26#define PIRQF 10
27#define PIRQG 11
28#define PIRQH 12
29
30/* PCI-Express memory map */
31#define MPC86XX_PCIE_LOWER_IO 0x00000000
32#define MPC86XX_PCIE_UPPER_IO 0x00ffffff
33
34#define MPC86XX_PCIE_LOWER_MEM 0x80000000
35#define MPC86XX_PCIE_UPPER_MEM 0x9fffffff
36
37#define MPC86XX_PCIE_IO_BASE 0xe2000000
38#define MPC86XX_PCIE_MEM_OFFSET 0x00000000
39
40#define MPC86XX_PCIE_IO_SIZE 0x01000000
41
42#define PCIE1_CFG_ADDR_OFFSET (0x8000)
43#define PCIE1_CFG_DATA_OFFSET (0x8004)
44
45#define PCIE2_CFG_ADDR_OFFSET (0x9000)
46#define PCIE2_CFG_DATA_OFFSET (0x9004)
47
48#define MPC86xx_PCIE_OFFSET PCIE1_CFG_ADDR_OFFSET
49#define MPC86xx_PCIE_SIZE (0x1000)
50
51#define MPC86XX_RSTCR_OFFSET (0xe00b0) /* Reset Control Register */ 19#define MPC86XX_RSTCR_OFFSET (0xe00b0) /* Reset Control Register */
52 20
53#endif /* __MPC8641_HPCN_H__ */ 21#endif /* __MPC8641_HPCN_H__ */
diff --git a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
index ebae73eb0063..146da3001c67 100644
--- a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
+++ b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
@@ -37,6 +37,14 @@
37#include "mpc86xx.h" 37#include "mpc86xx.h"
38#include "mpc8641_hpcn.h" 38#include "mpc8641_hpcn.h"
39 39
40#undef DEBUG
41
42#ifdef DEBUG
43#define DBG(fmt...) do { printk(KERN_ERR fmt); } while(0)
44#else
45#define DBG(fmt...) do { } while(0)
46#endif
47
40#ifndef CONFIG_PCI 48#ifndef CONFIG_PCI
41unsigned long isa_io_base = 0; 49unsigned long isa_io_base = 0;
42unsigned long isa_mem_base = 0; 50unsigned long isa_mem_base = 0;
@@ -44,205 +52,215 @@ unsigned long pci_dram_offset = 0;
44#endif 52#endif
45 53
46 54
47/* 55static void mpc86xx_8259_cascade(unsigned int irq, struct irq_desc *desc,
48 * Internal interrupts are all Level Sensitive, and Positive Polarity 56 struct pt_regs *regs)
49 */ 57{
50 58 unsigned int cascade_irq = i8259_irq(regs);
51static u_char mpc86xx_hpcn_openpic_initsenses[] __initdata = { 59 if (cascade_irq != NO_IRQ)
52 (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 0: Reserved */ 60 generic_handle_irq(cascade_irq, regs);
53 (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 1: MCM */ 61 desc->chip->eoi(irq);
54 (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 2: DDR DRAM */ 62}
55 (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 3: LBIU */
56 (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 4: DMA 0 */
57 (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 5: DMA 1 */
58 (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 6: DMA 2 */
59 (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 7: DMA 3 */
60 (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 8: PCIE1 */
61 (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 9: PCIE2 */
62 (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 10: Reserved */
63 (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 11: Reserved */
64 (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 12: DUART2 */
65 (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 13: TSEC 1 Transmit */
66 (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 14: TSEC 1 Receive */
67 (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 15: TSEC 3 transmit */
68 (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 16: TSEC 3 receive */
69 (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 17: TSEC 3 error */
70 (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 18: TSEC 1 Receive/Transmit Error */
71 (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 19: TSEC 2 Transmit */
72 (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 20: TSEC 2 Receive */
73 (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 21: TSEC 4 transmit */
74 (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 22: TSEC 4 receive */
75 (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 23: TSEC 4 error */
76 (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 24: TSEC 2 Receive/Transmit Error */
77 (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 25: Unused */
78 (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 26: DUART1 */
79 (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 27: I2C */
80 (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 28: Performance Monitor */
81 (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 29: Unused */
82 (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 30: Unused */
83 (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 31: Unused */
84 (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 32: SRIO error/write-port unit */
85 (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 33: SRIO outbound doorbell */
86 (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 34: SRIO inbound doorbell */
87 (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 35: Unused */
88 (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 36: Unused */
89 (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 37: SRIO outbound message unit 1 */
90 (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 38: SRIO inbound message unit 1 */
91 (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 39: SRIO outbound message unit 2 */
92 (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 40: SRIO inbound message unit 2 */
93 (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 41: Unused */
94 (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 42: Unused */
95 (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 43: Unused */
96 (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 44: Unused */
97 (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 45: Unused */
98 (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 46: Unused */
99 (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 47: Unused */
100 0x0, /* External 0: */
101 0x0, /* External 1: */
102 0x0, /* External 2: */
103 0x0, /* External 3: */
104 0x0, /* External 4: */
105 0x0, /* External 5: */
106 0x0, /* External 6: */
107 0x0, /* External 7: */
108 (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 8: Pixis FPGA */
109 (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* External 9: ULI 8259 INTR Cascade */
110 (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 10: Quad ETH PHY */
111 0x0, /* External 11: */
112 0x0,
113 0x0,
114 0x0,
115 0x0,
116};
117
118 63
119void __init 64void __init
120mpc86xx_hpcn_init_irq(void) 65mpc86xx_hpcn_init_irq(void)
121{ 66{
122 struct mpic *mpic1; 67 struct mpic *mpic1;
68 struct device_node *np, *cascade_node = NULL;
69 int cascade_irq;
123 phys_addr_t openpic_paddr; 70 phys_addr_t openpic_paddr;
124 71
72 np = of_find_node_by_type(NULL, "open-pic");
73 if (np == NULL)
74 return;
75
125 /* Determine the Physical Address of the OpenPIC regs */ 76 /* Determine the Physical Address of the OpenPIC regs */
126 openpic_paddr = get_immrbase() + MPC86xx_OPENPIC_OFFSET; 77 openpic_paddr = get_immrbase() + MPC86xx_OPENPIC_OFFSET;
127 78
128 /* Alloc mpic structure and per isu has 16 INT entries. */ 79 /* Alloc mpic structure and per isu has 16 INT entries. */
129 mpic1 = mpic_alloc(openpic_paddr, 80 mpic1 = mpic_alloc(np, openpic_paddr,
130 MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN, 81 MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
131 16, MPC86xx_OPENPIC_IRQ_OFFSET, 0, 250, 82 16, NR_IRQS - 4,
132 mpc86xx_hpcn_openpic_initsenses,
133 sizeof(mpc86xx_hpcn_openpic_initsenses),
134 " MPIC "); 83 " MPIC ");
135 BUG_ON(mpic1 == NULL); 84 BUG_ON(mpic1 == NULL);
136 85
86 mpic_assign_isu(mpic1, 0, openpic_paddr + 0x10000);
87
137 /* 48 Internal Interrupts */ 88 /* 48 Internal Interrupts */
138 mpic_assign_isu(mpic1, 0, openpic_paddr + 0x10200); 89 mpic_assign_isu(mpic1, 1, openpic_paddr + 0x10200);
139 mpic_assign_isu(mpic1, 1, openpic_paddr + 0x10400); 90 mpic_assign_isu(mpic1, 2, openpic_paddr + 0x10400);
140 mpic_assign_isu(mpic1, 2, openpic_paddr + 0x10600); 91 mpic_assign_isu(mpic1, 3, openpic_paddr + 0x10600);
141 92
142 /* 16 External interrupts */ 93 /* 16 External interrupts
143 mpic_assign_isu(mpic1, 3, openpic_paddr + 0x10000); 94 * Moving them from [0 - 15] to [64 - 79]
95 */
96 mpic_assign_isu(mpic1, 4, openpic_paddr + 0x10000);
144 97
145 mpic_init(mpic1); 98 mpic_init(mpic1);
146 99
147#ifdef CONFIG_PCI 100#ifdef CONFIG_PCI
148 mpic_setup_cascade(MPC86xx_IRQ_EXT9, i8259_irq_cascade, NULL); 101 /* Initialize i8259 controller */
149 i8259_init(0, I8259_OFFSET); 102 for_each_node_by_type(np, "interrupt-controller")
150#endif 103 if (device_is_compatible(np, "chrp,iic")) {
151} 104 cascade_node = np;
105 break;
106 }
107 if (cascade_node == NULL) {
108 printk(KERN_DEBUG "mpc86xxhpcn: no ISA interrupt controller\n");
109 return;
110 }
152 111
112 cascade_irq = irq_of_parse_and_map(cascade_node, 0);
113 if (cascade_irq == NO_IRQ) {
114 printk(KERN_ERR "mpc86xxhpcn: failed to map cascade interrupt");
115 return;
116 }
117 DBG("mpc86xxhpcn: cascade mapped to irq %d\n", cascade_irq);
153 118
119 i8259_init(cascade_node, 0);
120 set_irq_chained_handler(cascade_irq, mpc86xx_8259_cascade);
121#endif
122}
154 123
155#ifdef CONFIG_PCI 124#ifdef CONFIG_PCI
156/*
157 * interrupt routing
158 */
159 125
160int 126enum pirq{PIRQA = 8, PIRQB, PIRQC, PIRQD, PIRQE, PIRQF, PIRQG, PIRQH};
161mpc86xx_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin) 127const unsigned char uli1575_irq_route_table[16] = {
128 0, /* 0: Reserved */
129 0x8, /* 1: 0b1000 */
130 0, /* 2: Reserved */
131 0x2, /* 3: 0b0010 */
132 0x4, /* 4: 0b0100 */
133 0x5, /* 5: 0b0101 */
134 0x7, /* 6: 0b0111 */
135 0x6, /* 7: 0b0110 */
136 0, /* 8: Reserved */
137 0x1, /* 9: 0b0001 */
138 0x3, /* 10: 0b0011 */
139 0x9, /* 11: 0b1001 */
140 0xb, /* 12: 0b1011 */
141 0, /* 13: Reserved */
142 0xd, /* 14, 0b1101 */
143 0xf, /* 15, 0b1111 */
144};
145
146static int __devinit
147get_pci_irq_from_of(struct pci_controller *hose, int slot, int pin)
162{ 148{
163 static char pci_irq_table[][4] = { 149 struct of_irq oirq;
164 /* 150 u32 laddr[3];
165 * PCI IDSEL/INTPIN->INTLINE 151 struct device_node *hosenode = hose ? hose->arch_data : NULL;
166 * A B C D 152
167 */ 153 if (!hosenode) return -EINVAL;
168 {PIRQA, PIRQB, PIRQC, PIRQD}, /* IDSEL 17 -- PCI Slot 1 */ 154
169 {PIRQB, PIRQC, PIRQD, PIRQA}, /* IDSEL 18 -- PCI Slot 2 */ 155 laddr[0] = (hose->first_busno << 16) | (PCI_DEVFN(slot, 0) << 8);
170 {0, 0, 0, 0}, /* IDSEL 19 */ 156 laddr[1] = laddr[2] = 0;
171 {0, 0, 0, 0}, /* IDSEL 20 */ 157 of_irq_map_raw(hosenode, &pin, laddr, &oirq);
172 {0, 0, 0, 0}, /* IDSEL 21 */ 158 DBG("mpc86xx_hpcn: pci irq addr %x, slot %d, pin %d, irq %d\n",
173 {0, 0, 0, 0}, /* IDSEL 22 */ 159 laddr[0], slot, pin, oirq.specifier[0]);
174 {0, 0, 0, 0}, /* IDSEL 23 */ 160 return oirq.specifier[0];
175 {0, 0, 0, 0}, /* IDSEL 24 */
176 {0, 0, 0, 0}, /* IDSEL 25 */
177 {PIRQD, PIRQA, PIRQB, PIRQC}, /* IDSEL 26 -- PCI Bridge*/
178 {PIRQC, 0, 0, 0}, /* IDSEL 27 -- LAN */
179 {PIRQE, PIRQF, PIRQH, PIRQ7}, /* IDSEL 28 -- USB 1.1 */
180 {PIRQE, PIRQF, PIRQG, 0}, /* IDSEL 29 -- Audio & Modem */
181 {PIRQH, 0, 0, 0}, /* IDSEL 30 -- LPC & PMU*/
182 {PIRQD, 0, 0, 0}, /* IDSEL 31 -- ATA */
183 };
184
185 const long min_idsel = 17, max_idsel = 31, irqs_per_slot = 4;
186 return PCI_IRQ_TABLE_LOOKUP + I8259_OFFSET;
187} 161}
188 162
189static void __devinit quirk_ali1575(struct pci_dev *dev) 163static void __devinit quirk_uli1575(struct pci_dev *dev)
190{ 164{
191 unsigned short temp; 165 unsigned short temp;
166 struct pci_controller *hose = pci_bus_to_host(dev->bus);
167 unsigned char irq2pin[16];
168 unsigned long pirq_map_word = 0;
169 u32 irq;
170 int i;
192 171
193 /* 172 /*
194 * ALI1575 interrupts route table setup: 173 * ULI1575 interrupts route setup
174 */
175 memset(irq2pin, 0, 16); /* Initialize default value 0 */
176
177 /*
178 * PIRQA -> PIRQD mapping read from OF-tree
179 *
180 * interrupts for PCI slot0 -- PIRQA / PIRQB / PIRQC / PIRQD
181 * PCI slot1 -- PIRQB / PIRQC / PIRQD / PIRQA
182 */
183 for (i = 0; i < 4; i++){
184 irq = get_pci_irq_from_of(hose, 17, i + 1);
185 if (irq > 0 && irq < 16)
186 irq2pin[irq] = PIRQA + i;
187 else
188 printk(KERN_WARNING "ULI1575 device"
189 "(slot %d, pin %d) irq %d is invalid.\n",
190 17, i, irq);
191 }
192
193 /*
194 * PIRQE -> PIRQF mapping set manually
195 * 195 *
196 * IRQ pin IRQ# 196 * IRQ pin IRQ#
197 * PIRQA ---- 3
198 * PIRQB ---- 4
199 * PIRQC ---- 5
200 * PIRQD ---- 6
201 * PIRQE ---- 9 197 * PIRQE ---- 9
202 * PIRQF ---- 10 198 * PIRQF ---- 10
203 * PIRQG ---- 11 199 * PIRQG ---- 11
204 * PIRQH ---- 12 200 * PIRQH ---- 12
205 *
206 * interrupts for PCI slot0 -- PIRQA / PIRQB / PIRQC / PIRQD
207 * PCI slot1 -- PIRQB / PIRQC / PIRQD / PIRQA
208 */ 201 */
209 pci_write_config_dword(dev, 0x48, 0xb9317542); 202 for (i = 0; i < 4; i++) irq2pin[i + 9] = PIRQE + i;
203
204 /* Set IRQ-PIRQ Mapping to ULI1575 */
205 for (i = 0; i < 16; i++)
206 if (irq2pin[i])
207 pirq_map_word |= (uli1575_irq_route_table[i] & 0xf)
208 << ((irq2pin[i] - PIRQA) * 4);
210 209
211 /* USB 1.1 OHCI controller 1, interrupt: PIRQE */ 210 /* ULI1575 IRQ mapping conf register default value is 0xb9317542 */
212 pci_write_config_byte(dev, 0x86, 0x0c); 211 DBG("Setup ULI1575 IRQ mapping configuration register value = 0x%x\n",
212 pirq_map_word);
213 pci_write_config_dword(dev, 0x48, pirq_map_word);
213 214
214 /* USB 1.1 OHCI controller 2, interrupt: PIRQF */ 215#define ULI1575_SET_DEV_IRQ(slot, pin, reg) \
215 pci_write_config_byte(dev, 0x87, 0x0d); 216 do { \
217 int irq; \
218 irq = get_pci_irq_from_of(hose, slot, pin); \
219 if (irq > 0 && irq < 16) \
220 pci_write_config_byte(dev, reg, irq2pin[irq]); \
221 else \
222 printk(KERN_WARNING "ULI1575 device" \
223 "(slot %d, pin %d) irq %d is invalid.\n", \
224 slot, pin, irq); \
225 } while(0)
216 226
217 /* USB 1.1 OHCI controller 3, interrupt: PIRQH */ 227 /* USB 1.1 OHCI controller 1, slot 28, pin 1 */
218 pci_write_config_byte(dev, 0x88, 0x0f); 228 ULI1575_SET_DEV_IRQ(28, 1, 0x86);
219 229
220 /* USB 2.0 controller, interrupt: PIRQ7 */ 230 /* USB 1.1 OHCI controller 2, slot 28, pin 2 */
221 pci_write_config_byte(dev, 0x74, 0x06); 231 ULI1575_SET_DEV_IRQ(28, 2, 0x87);
222 232
223 /* Audio controller, interrupt: PIRQE */ 233 /* USB 1.1 OHCI controller 3, slot 28, pin 3 */
224 pci_write_config_byte(dev, 0x8a, 0x0c); 234 ULI1575_SET_DEV_IRQ(28, 3, 0x88);
225 235
226 /* Modem controller, interrupt: PIRQF */ 236 /* USB 2.0 controller, slot 28, pin 4 */
227 pci_write_config_byte(dev, 0x8b, 0x0d); 237 irq = get_pci_irq_from_of(hose, 28, 4);
238 if (irq >= 0 && irq <=15)
239 pci_write_config_dword(dev, 0x74, uli1575_irq_route_table[irq]);
228 240
229 /* HD audio controller, interrupt: PIRQG */ 241 /* Audio controller, slot 29, pin 1 */
230 pci_write_config_byte(dev, 0x8c, 0x0e); 242 ULI1575_SET_DEV_IRQ(29, 1, 0x8a);
231 243
232 /* Serial ATA interrupt: PIRQD */ 244 /* Modem controller, slot 29, pin 2 */
233 pci_write_config_byte(dev, 0x8d, 0x0b); 245 ULI1575_SET_DEV_IRQ(29, 2, 0x8b);
234 246
235 /* SMB interrupt: PIRQH */ 247 /* HD audio controller, slot 29, pin 3 */
236 pci_write_config_byte(dev, 0x8e, 0x0f); 248 ULI1575_SET_DEV_IRQ(29, 3, 0x8c);
237 249
238 /* PMU ACPI SCI interrupt: PIRQH */ 250 /* SMB interrupt: slot 30, pin 1 */
239 pci_write_config_byte(dev, 0x8f, 0x0f); 251 ULI1575_SET_DEV_IRQ(30, 1, 0x8e);
252
253 /* PMU ACPI SCI interrupt: slot 30, pin 2 */
254 ULI1575_SET_DEV_IRQ(30, 2, 0x8f);
255
256 /* Serial ATA interrupt: slot 31, pin 1 */
257 ULI1575_SET_DEV_IRQ(31, 1, 0x8d);
240 258
241 /* Primary PATA IDE IRQ: 14 259 /* Primary PATA IDE IRQ: 14
242 * Secondary PATA IDE IRQ: 15 260 * Secondary PATA IDE IRQ: 15
243 */ 261 */
244 pci_write_config_byte(dev, 0x44, 0x3d); 262 pci_write_config_byte(dev, 0x44, 0x30 | uli1575_irq_route_table[14]);
245 pci_write_config_byte(dev, 0x75, 0x0f); 263 pci_write_config_byte(dev, 0x75, uli1575_irq_route_table[15]);
246 264
247 /* Set IRQ14 and IRQ15 to legacy IRQs */ 265 /* Set IRQ14 and IRQ15 to legacy IRQs */
248 pci_read_config_word(dev, 0x46, &temp); 266 pci_read_config_word(dev, 0x46, &temp);
@@ -264,6 +282,8 @@ static void __devinit quirk_ali1575(struct pci_dev *dev)
264 */ 282 */
265 outb(0xfa, 0x4d0); 283 outb(0xfa, 0x4d0);
266 outb(0x1e, 0x4d1); 284 outb(0x1e, 0x4d1);
285
286#undef ULI1575_SET_DEV_IRQ
267} 287}
268 288
269static void __devinit quirk_uli5288(struct pci_dev *dev) 289static void __devinit quirk_uli5288(struct pci_dev *dev)
@@ -306,7 +326,7 @@ static void __devinit early_uli5249(struct pci_dev *dev)
306 dev->class |= 0x1; 326 dev->class |= 0x1;
307} 327}
308 328
309DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x1575, quirk_ali1575); 329DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x1575, quirk_uli1575);
310DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5288, quirk_uli5288); 330DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5288, quirk_uli5288);
311DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5229, quirk_uli5229); 331DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5229, quirk_uli5229);
312DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_AL, 0x5249, early_uli5249); 332DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_AL, 0x5249, early_uli5249);
@@ -337,8 +357,6 @@ mpc86xx_hpcn_setup_arch(void)
337 for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;) 357 for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;)
338 add_bridge(np); 358 add_bridge(np);
339 359
340 ppc_md.pci_swizzle = common_swizzle;
341 ppc_md.pci_map_irq = mpc86xx_map_irq;
342 ppc_md.pci_exclude_device = mpc86xx_exclude_device; 360 ppc_md.pci_exclude_device = mpc86xx_exclude_device;
343#endif 361#endif
344 362
@@ -377,6 +395,15 @@ mpc86xx_hpcn_show_cpuinfo(struct seq_file *m)
377} 395}
378 396
379 397
398void __init mpc86xx_hpcn_pcibios_fixup(void)
399{
400 struct pci_dev *dev = NULL;
401
402 for_each_pci_dev(dev)
403 pci_read_irq_line(dev);
404}
405
406
380/* 407/*
381 * Called very early, device-tree isn't unflattened 408 * Called very early, device-tree isn't unflattened
382 */ 409 */
@@ -431,6 +458,7 @@ define_machine(mpc86xx_hpcn) {
431 .setup_arch = mpc86xx_hpcn_setup_arch, 458 .setup_arch = mpc86xx_hpcn_setup_arch,
432 .init_IRQ = mpc86xx_hpcn_init_irq, 459 .init_IRQ = mpc86xx_hpcn_init_irq,
433 .show_cpuinfo = mpc86xx_hpcn_show_cpuinfo, 460 .show_cpuinfo = mpc86xx_hpcn_show_cpuinfo,
461 .pcibios_fixup = mpc86xx_hpcn_pcibios_fixup,
434 .get_irq = mpic_get_irq, 462 .get_irq = mpic_get_irq,
435 .restart = mpc86xx_restart, 463 .restart = mpc86xx_restart,
436 .time_init = mpc86xx_time_init, 464 .time_init = mpc86xx_time_init,
diff --git a/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c b/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c
index d7a4fc7ca238..ed00ed2455dd 100644
--- a/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c
+++ b/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c
@@ -1,7 +1,7 @@
1/* 1/*
2 * mpc7448_hpc2.c 2 * mpc7448_hpc2.c
3 * 3 *
4 * Board setup routines for the Freescale Taiga platform 4 * Board setup routines for the Freescale mpc7448hpc2(taiga) platform
5 * 5 *
6 * Author: Jacob Pan 6 * Author: Jacob Pan
7 * jacob.pan@freescale.com 7 * jacob.pan@freescale.com
@@ -12,10 +12,10 @@
12 * 12 *
13 * Copyright 2004-2006 Freescale Semiconductor, Inc. 13 * Copyright 2004-2006 Freescale Semiconductor, Inc.
14 * 14 *
15 * This file is licensed under 15 * This program is free software; you can redistribute it and/or
16 * the terms of the GNU General Public License version 2. This program 16 * modify it under the terms of the GNU General Public License
17 * is licensed "as is" without any warranty of any kind, whether express 17 * as published by the Free Software Foundation; either version
18 * or implied. 18 * 2 of the License, or (at your option) any later version.
19 */ 19 */
20 20
21#include <linux/config.h> 21#include <linux/config.h>
@@ -62,43 +62,8 @@ pci_dram_offset = MPC7448_HPC2_PCI_MEM_OFFSET;
62extern int tsi108_setup_pci(struct device_node *dev); 62extern int tsi108_setup_pci(struct device_node *dev);
63extern void _nmask_and_or_msr(unsigned long nmask, unsigned long or_val); 63extern void _nmask_and_or_msr(unsigned long nmask, unsigned long or_val);
64extern void tsi108_pci_int_init(void); 64extern void tsi108_pci_int_init(void);
65extern int tsi108_irq_cascade(struct pt_regs *regs, void *unused); 65extern void tsi108_irq_cascade(unsigned int irq, struct irq_desc *desc,
66 66 struct pt_regs *regs);
67/*
68 * Define all of the IRQ senses and polarities. Taken from the
69 * mpc7448hpc manual.
70 * Note: Likely, this table and the following function should be
71 * obtained and derived from the OF Device Tree.
72 */
73
74static u_char mpc7448_hpc2_pic_initsenses[] __initdata = {
75 /* External on-board sources */
76 (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* INT[0] XINT0 from FPGA */
77 (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* INT[1] XINT1 from FPGA */
78 (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* INT[2] PHY_INT from both GIGE */
79 (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* INT[3] RESERVED */
80 /* Internal Tsi108/109 interrupt sources */
81 (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* Reserved IRQ */
82 (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* Reserved IRQ */
83 (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* Reserved IRQ */
84 (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* Reserved IRQ */
85 (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* DMA0 */
86 (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* DMA1 */
87 (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* DMA2 */
88 (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* DMA3 */
89 (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* UART0 */
90 (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* UART1 */
91 (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* I2C */
92 (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* GPIO */
93 (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* GIGE0 */
94 (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* GIGE1 */
95 (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* Reserved IRQ */
96 (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* HLP */
97 (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* SDC */
98 (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* Processor IF */
99 (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* Reserved IRQ */
100 (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* PCI/X block */
101};
102 67
103int mpc7448_hpc2_exclude_device(u_char bus, u_char devfn) 68int mpc7448_hpc2_exclude_device(u_char bus, u_char devfn)
104{ 69{
@@ -229,6 +194,8 @@ static void __init mpc7448_hpc2_init_IRQ(void)
229{ 194{
230 struct mpic *mpic; 195 struct mpic *mpic;
231 phys_addr_t mpic_paddr = 0; 196 phys_addr_t mpic_paddr = 0;
197 unsigned int cascade_pci_irq;
198 struct device_node *tsi_pci;
232 struct device_node *tsi_pic; 199 struct device_node *tsi_pic;
233 200
234 tsi_pic = of_find_node_by_type(NULL, "open-pic"); 201 tsi_pic = of_find_node_by_type(NULL, "open-pic");
@@ -246,24 +213,31 @@ static void __init mpc7448_hpc2_init_IRQ(void)
246 DBG("%s: tsi108pic phys_addr = 0x%x\n", __FUNCTION__, 213 DBG("%s: tsi108pic phys_addr = 0x%x\n", __FUNCTION__,
247 (u32) mpic_paddr); 214 (u32) mpic_paddr);
248 215
249 mpic = mpic_alloc(mpic_paddr, 216 mpic = mpic_alloc(tsi_pic, mpic_paddr,
250 MPIC_PRIMARY | MPIC_BIG_ENDIAN | MPIC_WANTS_RESET | 217 MPIC_PRIMARY | MPIC_BIG_ENDIAN | MPIC_WANTS_RESET |
251 MPIC_SPV_EOI | MPIC_MOD_ID(MPIC_ID_TSI108), 218 MPIC_SPV_EOI | MPIC_MOD_ID(MPIC_ID_TSI108),
252 0, /* num_sources used */ 219 0, /* num_sources used */
253 TSI108_IRQ_BASE,
254 0, /* num_sources used */ 220 0, /* num_sources used */
255 NR_IRQS - 4 /* XXXX */, 221 "Tsi108_PIC");
256 mpc7448_hpc2_pic_initsenses,
257 sizeof(mpc7448_hpc2_pic_initsenses), "Tsi108_PIC");
258 222
259 BUG_ON(mpic == NULL); /* XXXX */ 223 BUG_ON(mpic == NULL); /* XXXX */
260
261 mpic_init(mpic); 224 mpic_init(mpic);
262 mpic_setup_cascade(IRQ_TSI108_PCI, tsi108_irq_cascade, mpic); 225
226 tsi_pci = of_find_node_by_type(NULL, "pci");
227 if (tsi_pci == 0) {
228 printk("%s: No tsi108 pci node found !\n", __FUNCTION__);
229 return;
230 }
231
232 cascade_pci_irq = irq_of_parse_and_map(tsi_pci, 0);
233 set_irq_data(cascade_pci_irq, mpic);
234 set_irq_chained_handler(cascade_pci_irq, tsi108_irq_cascade);
235
263 tsi108_pci_int_init(); 236 tsi108_pci_int_init();
264 237
265 /* Configure MPIC outputs to CPU0 */ 238 /* Configure MPIC outputs to CPU0 */
266 tsi108_write_reg(TSI108_MPIC_OFFSET + 0x30c, 0); 239 tsi108_write_reg(TSI108_MPIC_OFFSET + 0x30c, 0);
240 of_node_put(tsi_pic);
267} 241}
268 242
269void mpc7448_hpc2_show_cpuinfo(struct seq_file *m) 243void mpc7448_hpc2_show_cpuinfo(struct seq_file *m)
@@ -320,6 +294,7 @@ static int mpc7448_machine_check_exception(struct pt_regs *regs)
320 return 0; 294 return 0;
321 295
322} 296}
297
323define_machine(mpc7448_hpc2){ 298define_machine(mpc7448_hpc2){
324 .name = "MPC7448 HPC2", 299 .name = "MPC7448 HPC2",
325 .probe = mpc7448_hpc2_probe, 300 .probe = mpc7448_hpc2_probe,
diff --git a/arch/powerpc/platforms/powermac/bootx_init.c b/arch/powerpc/platforms/powermac/bootx_init.c
index 6a026c733f6a..9d73d0234c5d 100644
--- a/arch/powerpc/platforms/powermac/bootx_init.c
+++ b/arch/powerpc/platforms/powermac/bootx_init.c
@@ -411,8 +411,15 @@ static unsigned long __init bootx_flatten_dt(unsigned long start)
411 DBG("End of boot params: %x\n", mem_end); 411 DBG("End of boot params: %x\n", mem_end);
412 rsvmap[0] = mem_start; 412 rsvmap[0] = mem_start;
413 rsvmap[1] = mem_end; 413 rsvmap[1] = mem_end;
414 rsvmap[2] = 0; 414 if (bootx_info->ramDisk) {
415 rsvmap[3] = 0; 415 rsvmap[2] = ((unsigned long)bootx_info) + bootx_info->ramDisk;
416 rsvmap[3] = rsvmap[2] + bootx_info->ramDiskSize;
417 rsvmap[4] = 0;
418 rsvmap[5] = 0;
419 } else {
420 rsvmap[2] = 0;
421 rsvmap[3] = 0;
422 }
416 423
417 return (unsigned long)hdr; 424 return (unsigned long)hdr;
418} 425}
@@ -543,12 +550,12 @@ void __init bootx_init(unsigned long r3, unsigned long r4)
543 */ 550 */
544 if (bi->version < 5) { 551 if (bi->version < 5) {
545 space = bi->deviceTreeOffset + bi->deviceTreeSize; 552 space = bi->deviceTreeOffset + bi->deviceTreeSize;
546 if (bi->ramDisk) 553 if (bi->ramDisk >= space)
547 space = bi->ramDisk + bi->ramDiskSize; 554 space = bi->ramDisk + bi->ramDiskSize;
548 } else 555 } else
549 space = bi->totalParamsSize; 556 space = bi->totalParamsSize;
550 557
551 bootx_printf("Total space used by parameters & ramdisk: %x \n", space); 558 bootx_printf("Total space used by parameters & ramdisk: 0x%x \n", space);
552 559
553 /* New BootX will have flushed all TLBs and enters kernel with 560 /* New BootX will have flushed all TLBs and enters kernel with
554 * MMU switched OFF, so this should not be useful anymore. 561 * MMU switched OFF, so this should not be useful anymore.
diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c
index 12b65609c072..ef10bcf2d943 100644
--- a/arch/powerpc/sysdev/fsl_soc.c
+++ b/arch/powerpc/sysdev/fsl_soc.c
@@ -85,11 +85,8 @@ static int __init gfar_mdio_of_init(void)
85 mdio_data.irq[k] = -1; 85 mdio_data.irq[k] = -1;
86 86
87 while ((child = of_get_next_child(np, child)) != NULL) { 87 while ((child = of_get_next_child(np, child)) != NULL) {
88 if (child->n_intrs) { 88 u32 *id = get_property(child, "reg", NULL);
89 u32 *id = 89 mdio_data.irq[*id] = irq_of_parse_and_map(child, 0);
90 (u32 *) get_property(child, "reg", NULL);
91 mdio_data.irq[*id] = child->intrs[0].line;
92 }
93 } 90 }
94 91
95 ret = 92 ret =
@@ -131,6 +128,7 @@ static int __init gfar_of_init(void)
131 char *model; 128 char *model;
132 void *mac_addr; 129 void *mac_addr;
133 phandle *ph; 130 phandle *ph;
131 int n_res = 1;
134 132
135 memset(r, 0, sizeof(r)); 133 memset(r, 0, sizeof(r));
136 memset(&gfar_data, 0, sizeof(gfar_data)); 134 memset(&gfar_data, 0, sizeof(gfar_data));
@@ -139,8 +137,7 @@ static int __init gfar_of_init(void)
139 if (ret) 137 if (ret)
140 goto err; 138 goto err;
141 139
142 r[1].start = np->intrs[0].line; 140 r[1].start = r[1].end = irq_of_parse_and_map(np, 0);
143 r[1].end = np->intrs[0].line;
144 r[1].flags = IORESOURCE_IRQ; 141 r[1].flags = IORESOURCE_IRQ;
145 142
146 model = get_property(np, "model", NULL); 143 model = get_property(np, "model", NULL);
@@ -150,19 +147,19 @@ static int __init gfar_of_init(void)
150 r[1].name = gfar_tx_intr; 147 r[1].name = gfar_tx_intr;
151 148
152 r[2].name = gfar_rx_intr; 149 r[2].name = gfar_rx_intr;
153 r[2].start = np->intrs[1].line; 150 r[2].start = r[2].end = irq_of_parse_and_map(np, 1);
154 r[2].end = np->intrs[1].line;
155 r[2].flags = IORESOURCE_IRQ; 151 r[2].flags = IORESOURCE_IRQ;
156 152
157 r[3].name = gfar_err_intr; 153 r[3].name = gfar_err_intr;
158 r[3].start = np->intrs[2].line; 154 r[3].start = r[3].end = irq_of_parse_and_map(np, 2);
159 r[3].end = np->intrs[2].line;
160 r[3].flags = IORESOURCE_IRQ; 155 r[3].flags = IORESOURCE_IRQ;
156
157 n_res += 2;
161 } 158 }
162 159
163 gfar_dev = 160 gfar_dev =
164 platform_device_register_simple("fsl-gianfar", i, &r[0], 161 platform_device_register_simple("fsl-gianfar", i, &r[0],
165 np->n_intrs + 1); 162 n_res + 1);
166 163
167 if (IS_ERR(gfar_dev)) { 164 if (IS_ERR(gfar_dev)) {
168 ret = PTR_ERR(gfar_dev); 165 ret = PTR_ERR(gfar_dev);
@@ -259,8 +256,7 @@ static int __init fsl_i2c_of_init(void)
259 if (ret) 256 if (ret)
260 goto err; 257 goto err;
261 258
262 r[1].start = np->intrs[0].line; 259 r[1].start = r[1].end = irq_of_parse_and_map(np, 0);
263 r[1].end = np->intrs[0].line;
264 r[1].flags = IORESOURCE_IRQ; 260 r[1].flags = IORESOURCE_IRQ;
265 261
266 i2c_dev = platform_device_register_simple("fsl-i2c", i, r, 2); 262 i2c_dev = platform_device_register_simple("fsl-i2c", i, r, 2);
@@ -396,8 +392,7 @@ static int __init fsl_usb_of_init(void)
396 if (ret) 392 if (ret)
397 goto err; 393 goto err;
398 394
399 r[1].start = np->intrs[0].line; 395 r[1].start = r[1].end = irq_of_parse_and_map(np, 0);
400 r[1].end = np->intrs[0].line;
401 r[1].flags = IORESOURCE_IRQ; 396 r[1].flags = IORESOURCE_IRQ;
402 397
403 usb_dev_mph = 398 usb_dev_mph =
@@ -445,8 +440,7 @@ static int __init fsl_usb_of_init(void)
445 if (ret) 440 if (ret)
446 goto unreg_mph; 441 goto unreg_mph;
447 442
448 r[1].start = np->intrs[0].line; 443 r[1].start = r[1].end = irq_of_parse_and_map(np, 0);
449 r[1].end = np->intrs[0].line;
450 r[1].flags = IORESOURCE_IRQ; 444 r[1].flags = IORESOURCE_IRQ;
451 445
452 usb_dev_dr = 446 usb_dev_dr =
diff --git a/arch/powerpc/sysdev/tsi108_dev.c b/arch/powerpc/sysdev/tsi108_dev.c
index 26a0cc820cde..f3038461d4c0 100644
--- a/arch/powerpc/sysdev/tsi108_dev.c
+++ b/arch/powerpc/sysdev/tsi108_dev.c
@@ -93,13 +93,15 @@ static int __init tsi108_eth_of_init(void)
93 goto err; 93 goto err;
94 94
95 r[1].name = "tx"; 95 r[1].name = "tx";
96 r[1].start = np->intrs[0].line; 96 r[1].start = irq_of_parse_and_map(np, 0);
97 r[1].end = np->intrs[0].line; 97 r[1].end = irq_of_parse_and_map(np, 0);
98 r[1].flags = IORESOURCE_IRQ; 98 r[1].flags = IORESOURCE_IRQ;
99 DBG("%s: name:start->end = %s:0x%lx-> 0x%lx\n",
100 __FUNCTION__,r[1].name, r[1].start, r[1].end);
99 101
100 tsi_eth_dev = 102 tsi_eth_dev =
101 platform_device_register_simple("tsi-ethernet", i, &r[0], 103 platform_device_register_simple("tsi-ethernet", i, &r[0],
102 np->n_intrs + 1); 104 1);
103 105
104 if (IS_ERR(tsi_eth_dev)) { 106 if (IS_ERR(tsi_eth_dev)) {
105 ret = PTR_ERR(tsi_eth_dev); 107 ret = PTR_ERR(tsi_eth_dev);
@@ -127,7 +129,7 @@ static int __init tsi108_eth_of_init(void)
127 tsi_eth_data.regs = r[0].start; 129 tsi_eth_data.regs = r[0].start;
128 tsi_eth_data.phyregs = res.start; 130 tsi_eth_data.phyregs = res.start;
129 tsi_eth_data.phy = *phy_id; 131 tsi_eth_data.phy = *phy_id;
130 tsi_eth_data.irq_num = np->intrs[0].line; 132 tsi_eth_data.irq_num = irq_of_parse_and_map(np, 0);
131 of_node_put(phy); 133 of_node_put(phy);
132 ret = 134 ret =
133 platform_device_add_data(tsi_eth_dev, &tsi_eth_data, 135 platform_device_add_data(tsi_eth_dev, &tsi_eth_data,
diff --git a/arch/powerpc/sysdev/tsi108_pci.c b/arch/powerpc/sysdev/tsi108_pci.c
index 3265d54c82ed..2ab06ed3ae73 100644
--- a/arch/powerpc/sysdev/tsi108_pci.c
+++ b/arch/powerpc/sysdev/tsi108_pci.c
@@ -26,7 +26,6 @@
26#include <linux/irq.h> 26#include <linux/irq.h>
27#include <linux/interrupt.h> 27#include <linux/interrupt.h>
28 28
29
30#include <asm/byteorder.h> 29#include <asm/byteorder.h>
31#include <asm/io.h> 30#include <asm/io.h>
32#include <asm/irq.h> 31#include <asm/irq.h>
@@ -228,7 +227,7 @@ int __init tsi108_setup_pci(struct device_node *dev)
228 227
229 (hose)->ops = &tsi108_direct_pci_ops; 228 (hose)->ops = &tsi108_direct_pci_ops;
230 229
231 printk(KERN_INFO "Found tsi108 PCI host bridge at 0x%08lx. " 230 printk(KERN_INFO "Found tsi108 PCI host bridge at 0x%08x. "
232 "Firmware bus number: %d->%d\n", 231 "Firmware bus number: %d->%d\n",
233 rsrc.start, hose->first_busno, hose->last_busno); 232 rsrc.start, hose->first_busno, hose->last_busno);
234 233
@@ -278,7 +277,7 @@ static void init_pci_source(void)
278 mb(); 277 mb();
279} 278}
280 279
281static inline int get_pci_source(void) 280static inline unsigned int get_pci_source(void)
282{ 281{
283 u_int temp = 0; 282 u_int temp = 0;
284 int irq = -1; 283 int irq = -1;
@@ -371,12 +370,12 @@ static void tsi108_pci_irq_end(u_int irq)
371 * Interrupt controller descriptor for cascaded PCI interrupt controller. 370 * Interrupt controller descriptor for cascaded PCI interrupt controller.
372 */ 371 */
373 372
374struct hw_interrupt_type tsi108_pci_irq = { 373static struct irq_chip tsi108_pci_irq = {
375 .typename = "tsi108_PCI_int", 374 .typename = "tsi108_PCI_int",
376 .enable = tsi108_pci_irq_enable, 375 .mask = tsi108_pci_irq_disable,
377 .disable = tsi108_pci_irq_disable,
378 .ack = tsi108_pci_irq_ack, 376 .ack = tsi108_pci_irq_ack,
379 .end = tsi108_pci_irq_end, 377 .end = tsi108_pci_irq_end,
378 .unmask = tsi108_pci_irq_enable,
380}; 379};
381 380
382/* 381/*
@@ -399,14 +398,18 @@ void __init tsi108_pci_int_init(void)
399 DBG("Tsi108_pci_int_init: initializing PCI interrupts\n"); 398 DBG("Tsi108_pci_int_init: initializing PCI interrupts\n");
400 399
401 for (i = 0; i < NUM_PCI_IRQS; i++) { 400 for (i = 0; i < NUM_PCI_IRQS; i++) {
402 irq_desc[i + IRQ_PCI_INTAD_BASE].handler = &tsi108_pci_irq; 401 irq_desc[i + IRQ_PCI_INTAD_BASE].chip = &tsi108_pci_irq;
403 irq_desc[i + IRQ_PCI_INTAD_BASE].status |= IRQ_LEVEL; 402 irq_desc[i + IRQ_PCI_INTAD_BASE].status |= IRQ_LEVEL;
404 } 403 }
405 404
406 init_pci_source(); 405 init_pci_source();
407} 406}
408 407
409int tsi108_irq_cascade(struct pt_regs *regs, void *unused) 408void tsi108_irq_cascade(unsigned int irq, struct irq_desc *desc,
409 struct pt_regs *regs)
410{ 410{
411 return get_pci_source(); 411 unsigned int cascade_irq = get_pci_source();
412 if (cascade_irq != NO_IRQ)
413 generic_handle_irq(cascade_irq, regs);
414 desc->chip->eoi(irq);
412} 415}
generated by cgit v1.2.2 (git 2.25.0) at 2024-12-28 23:55:24 -0500