7 files changed, 1025 insertions, 31 deletions

diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
index 5c5d2b5f3ca2..b347ac320252 100644
--- a/arch/powerpc/kernel/Makefile
+++ b/arch/powerpc/kernel/Makefile
@@ -29,7 +29,7 @@ extra-$(CONFIG_PPC64)		+= entry_64.o
 extra-$(CONFIG_PPC_FPU)         += fpu.o
 extra-y                         += vmlinux.lds
 
-obj-y                           += process.o init_task.o \
+obj-y                           += process.o init_task.o time.o \
                                    prom.o systbl.o traps.o
 obj-$(CONFIG_PPC32)             += entry_32.o idle_6xx.o setup_32.o misc_32.o
 obj-$(CONFIG_PPC64)             += setup_64.o misc_64.o
@@ -44,7 +44,7 @@ endif
 
 else
 # stuff used from here for ARCH=ppc or ARCH=ppc64
-obj-$(CONFIG_PPC64)             += traps.o process.o init_task.o
+obj-$(CONFIG_PPC64)             += traps.o process.o init_task.o time.o
 
 fpux-$(CONFIG_PPC32)            += fpu.o
 extra-$(CONFIG_PPC_FPU)         += $(fpux-y)
diff --git a/arch/powerpc/kernel/misc_32.S b/arch/powerpc/kernel/misc_32.S
index 0b0e908b5065..303229b090b8 100644
--- a/arch/powerpc/kernel/misc_32.S
+++ b/arch/powerpc/kernel/misc_32.S
@@ -36,6 +36,33 @@ _GLOBAL(__delay)
         blr
 
 /*
+ * This returns the high 64 bits of the product of two 64-bit numbers.
+ */
+_GLOBAL(mulhdu)
+        cmpwi   r6,0
+        cmpwi   cr1,r3,0
+        mr      r10,r4
+        mulhwu  r4,r4,r5
+        beq     1f
+        mulhwu  r0,r10,r6
+        mullw   r7,r10,r5
+        addc    r7,r0,r7
+        addze   r4,r4
+1:      beqlr   cr1             /* all done if high part of A is 0 */
+        mr      r10,r3
+        mullw   r9,r3,r5
+        mulhwu  r3,r3,r5
+        beq     2f
+        mullw   r0,r10,r6
+        mulhwu  r8,r10,r6
+        addc    r7,r0,r7
+        adde    r4,r4,r8
+        addze   r3,r3
+2:      addc    r4,r4,r9
+        addze   r3,r3
+        blr
+
+/*
  * Returns (address we're running at) - (address we were linked at)
  * for use before the text and data are mapped to KERNELBASE.
  */
diff --git a/arch/powerpc/kernel/ppc_ksyms.c b/arch/powerpc/kernel/ppc_ksyms.c
index 010554e5fe48..40c9e67e1b28 100644
--- a/arch/powerpc/kernel/ppc_ksyms.c
+++ b/arch/powerpc/kernel/ppc_ksyms.c
@@ -260,7 +260,6 @@ EXPORT_SYMBOL(__res);
 #ifdef CONFIG_PPC32
 EXPORT_SYMBOL(next_mmu_context);
 EXPORT_SYMBOL(set_context);
-EXPORT_SYMBOL(disarm_decr);
 #endif
 
 #ifdef CONFIG_PPC_STD_MMU_32
diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index 4fcf67575cbb..6f29614c3581 100644
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -1083,15 +1083,6 @@ void ppc64_terminate_msg(unsigned int src, const char *msg)
         printk("[terminate]%04x %s\n", src, msg);
 }
 
-/* This should only be called on processor 0 during calibrate decr */
-void __init setup_default_decr(void)
-{
-        struct paca_struct *lpaca = get_paca();
-
-        lpaca->default_decr = tb_ticks_per_jiffy;
-        lpaca->next_jiffy_update_tb = get_tb() + tb_ticks_per_jiffy;
-}
-
 #ifndef CONFIG_PPC_ISERIES
 /*
  * This function can be used by platforms to "find" legacy serial ports.
diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c
new file mode 100644
index 000000000000..d1608473075f
--- /dev/null
+++ b/arch/powerpc/kernel/time.c
@@ -0,0 +1,978 @@
+/*
+ * Common time routines among all ppc machines.
+ *
+ * Written by Cort Dougan (cort@cs.nmt.edu) to merge
+ * Paul Mackerras' version and mine for PReP and Pmac.
+ * MPC8xx/MBX changes by Dan Malek (dmalek@jlc.net).
+ * Converted for 64-bit by Mike Corrigan (mikejc@us.ibm.com)
+ *
+ * First round of bugfixes by Gabriel Paubert (paubert@iram.es)
+ * to make clock more stable (2.4.0-test5). The only thing
+ * that this code assumes is that the timebases have been synchronized
+ * by firmware on SMP and are never stopped (never do sleep
+ * on SMP then, nap and doze are OK).
+ * 
+ * Speeded up do_gettimeofday by getting rid of references to
+ * xtime (which required locks for consistency). (mikejc@us.ibm.com)
+ *
+ * TODO (not necessarily in this file):
+ * - improve precision and reproducibility of timebase frequency
+ * measurement at boot time. (for iSeries, we calibrate the timebase
+ * against the Titan chip's clock.)
+ * - for astronomical applications: add a new function to get
+ * non ambiguous timestamps even around leap seconds. This needs
+ * a new timestamp format and a good name.
+ *
+ * 1997-09-10  Updated NTP code according to technical memorandum Jan '96
+ *             "A Kernel Model for Precision Timekeeping" by Dave Mills
+ *
+ *      This program is free software; you can redistribute it and/or
+ *      modify it under the terms of the GNU General Public License
+ *      as published by the Free Software Foundation; either version
+ *      2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/config.h>
+#include <linux/errno.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/interrupt.h>
+#include <linux/timex.h>
+#include <linux/kernel_stat.h>
+#include <linux/time.h>
+#include <linux/init.h>
+#include <linux/profile.h>
+#include <linux/cpu.h>
+#include <linux/security.h>
+#include <linux/percpu.h>
+#include <linux/rtc.h>
+
+#include <asm/io.h>
+#include <asm/processor.h>
+#include <asm/nvram.h>
+#include <asm/cache.h>
+#include <asm/machdep.h>
+#include <asm/uaccess.h>
+#include <asm/time.h>
+#include <asm/prom.h>
+#include <asm/irq.h>
+#include <asm/div64.h>
+#ifdef CONFIG_PPC64
+#include <asm/systemcfg.h>
+#include <asm/firmware.h>
+#endif
+#ifdef CONFIG_PPC_ISERIES
+#include <asm/iSeries/ItLpQueue.h>
+#include <asm/iSeries/HvCallXm.h>
+#endif
+
+u64 jiffies_64 __cacheline_aligned_in_smp = INITIAL_JIFFIES;
+
+EXPORT_SYMBOL(jiffies_64);
+
+/* keep track of when we need to update the rtc */
+time_t last_rtc_update;
+extern int piranha_simulator;
+#ifdef CONFIG_PPC_ISERIES
+unsigned long iSeries_recal_titan = 0;
+unsigned long iSeries_recal_tb = 0; 
+static unsigned long first_settimeofday = 1;
+#endif
+
+/* The decrementer counts down by 128 every 128ns on a 601. */
+#define DECREMENTER_COUNT_601   (1000000000 / HZ)
+
+#define XSEC_PER_SEC (1024*1024)
+
+#ifdef CONFIG_PPC64
+#define SCALE_XSEC(xsec, max)   (((xsec) * max) / XSEC_PER_SEC)
+#else
+/* compute ((xsec << 12) * max) >> 32 */
+#define SCALE_XSEC(xsec, max)   mulhwu((xsec) << 12, max)
+#endif
+
+unsigned long tb_ticks_per_jiffy;
+unsigned long tb_ticks_per_usec = 100; /* sane default */
+EXPORT_SYMBOL(tb_ticks_per_usec);
+unsigned long tb_ticks_per_sec;
+u64 tb_to_xs;
+unsigned tb_to_us;
+unsigned long processor_freq;
+DEFINE_SPINLOCK(rtc_lock);
+EXPORT_SYMBOL_GPL(rtc_lock);
+
+u64 tb_to_ns_scale;
+unsigned tb_to_ns_shift;
+
+struct gettimeofday_struct do_gtod;
+
+extern unsigned long wall_jiffies;
+
+extern struct timezone sys_tz;
+static long timezone_offset;
+
+void ppc_adjtimex(void);
+
+static unsigned adjusting_time = 0;
+
+unsigned long ppc_proc_freq;
+unsigned long ppc_tb_freq;
+
+#ifdef CONFIG_PPC32     /* XXX for now */
+#define boot_cpuid      0
+#endif
+
+static __inline__ void timer_check_rtc(void)
+{
+        /*
+         * update the rtc when needed, this should be performed on the
+         * right fraction of a second. Half or full second ?
+         * Full second works on mk48t59 clocks, others need testing.
+         * Note that this update is basically only used through 
+         * the adjtimex system calls. Setting the HW clock in
+         * any other way is a /dev/rtc and userland business.
+         * This is still wrong by -0.5/+1.5 jiffies because of the
+         * timer interrupt resolution and possible delay, but here we 
+         * hit a quantization limit which can only be solved by higher
+         * resolution timers and decoupling time management from timer
+         * interrupts. This is also wrong on the clocks
+         * which require being written at the half second boundary.
+         * We should have an rtc call that only sets the minutes and
+         * seconds like on Intel to avoid problems with non UTC clocks.
+         */
+        if (ntp_synced() &&
+            xtime.tv_sec - last_rtc_update >= 659 &&
+            abs((xtime.tv_nsec/1000) - (1000000-1000000/HZ)) < 500000/HZ &&
+            jiffies - wall_jiffies == 1) {
+                struct rtc_time tm;
+                to_tm(xtime.tv_sec + 1 + timezone_offset, &tm);
+                tm.tm_year -= 1900;
+                tm.tm_mon -= 1;
+                if (ppc_md.set_rtc_time(&tm) == 0)
+                        last_rtc_update = xtime.tv_sec + 1;
+                else
+                        /* Try again one minute later */
+                        last_rtc_update += 60;
+        }
+}
+
+/*
+ * This version of gettimeofday has microsecond resolution.
+ */
+static inline void __do_gettimeofday(struct timeval *tv, u64 tb_val)
+{
+        unsigned long sec, usec;
+        u64 tb_ticks, xsec;
+        struct gettimeofday_vars *temp_varp;
+        u64 temp_tb_to_xs, temp_stamp_xsec;
+
+        /*
+         * These calculations are faster (gets rid of divides)
+         * if done in units of 1/2^20 rather than microseconds.
+         * The conversion to microseconds at the end is done
+         * without a divide (and in fact, without a multiply)
+         */
+        temp_varp = do_gtod.varp;
+        tb_ticks = tb_val - temp_varp->tb_orig_stamp;
+        temp_tb_to_xs = temp_varp->tb_to_xs;
+        temp_stamp_xsec = temp_varp->stamp_xsec;
+        xsec = temp_stamp_xsec + mulhdu(tb_ticks, temp_tb_to_xs);
+        sec = xsec / XSEC_PER_SEC;
+        usec = (unsigned long)xsec & (XSEC_PER_SEC - 1);
+        usec = SCALE_XSEC(usec, 1000000);
+
+        tv->tv_sec = sec;
+        tv->tv_usec = usec;
+}
+
+void do_gettimeofday(struct timeval *tv)
+{
+        __do_gettimeofday(tv, get_tb());
+}
+
+EXPORT_SYMBOL(do_gettimeofday);
+
+/* Synchronize xtime with do_gettimeofday */ 
+
+static inline void timer_sync_xtime(unsigned long cur_tb)
+{
+#ifdef CONFIG_PPC64
+        /* why do we do this? */
+        struct timeval my_tv;
+
+        __do_gettimeofday(&my_tv, cur_tb);
+
+        if (xtime.tv_sec <= my_tv.tv_sec) {
+                xtime.tv_sec = my_tv.tv_sec;
+                xtime.tv_nsec = my_tv.tv_usec * 1000;
+        }
+#endif
+}
+
+/*
+ * There are two copies of tb_to_xs and stamp_xsec so that no
+ * lock is needed to access and use these values in
+ * do_gettimeofday.  We alternate the copies and as long as a
+ * reasonable time elapses between changes, there will never
+ * be inconsistent values.  ntpd has a minimum of one minute
+ * between updates.
+ */
+static inline void update_gtod(u64 new_tb_stamp, u64 new_stamp_xsec,
+                               unsigned int new_tb_to_xs)
+{
+        unsigned temp_idx;
+        struct gettimeofday_vars *temp_varp;
+
+        temp_idx = (do_gtod.var_idx == 0);
+        temp_varp = &do_gtod.vars[temp_idx];
+
+        temp_varp->tb_to_xs = new_tb_to_xs;
+        temp_varp->tb_orig_stamp = new_tb_stamp;
+        temp_varp->stamp_xsec = new_stamp_xsec;
+        smp_mb();
+        do_gtod.varp = temp_varp;
+        do_gtod.var_idx = temp_idx;
+
+#ifdef CONFIG_PPC64
+        /*
+         * tb_update_count is used to allow the userspace gettimeofday code
+         * to assure itself that it sees a consistent view of the tb_to_xs and
+         * stamp_xsec variables.  It reads the tb_update_count, then reads
+         * tb_to_xs and stamp_xsec and then reads tb_update_count again.  If
+         * the two values of tb_update_count match and are even then the
+         * tb_to_xs and stamp_xsec values are consistent.  If not, then it
+         * loops back and reads them again until this criteria is met.
+         */
+        ++(systemcfg->tb_update_count);
+        smp_wmb();
+        systemcfg->tb_orig_stamp = new_tb_stamp;
+        systemcfg->stamp_xsec = new_stamp_xsec;
+        systemcfg->tb_to_xs = new_tb_to_xs;
+        smp_wmb();
+        ++(systemcfg->tb_update_count);
+#endif
+}
+
+/*
+ * When the timebase - tb_orig_stamp gets too big, we do a manipulation
+ * between tb_orig_stamp and stamp_xsec. The goal here is to keep the
+ * difference tb - tb_orig_stamp small enough to always fit inside a
+ * 32 bits number. This is a requirement of our fast 32 bits userland
+ * implementation in the vdso. If we "miss" a call to this function
+ * (interrupt latency, CPU locked in a spinlock, ...) and we end up
+ * with a too big difference, then the vdso will fallback to calling
+ * the syscall
+ */
+static __inline__ void timer_recalc_offset(u64 cur_tb)
+{
+        unsigned long offset;
+        u64 new_stamp_xsec;
+
+        offset = cur_tb - do_gtod.varp->tb_orig_stamp;
+        if ((offset & 0x80000000u) == 0)
+                return;
+        new_stamp_xsec = do_gtod.varp->stamp_xsec
+                + mulhdu(offset, do_gtod.varp->tb_to_xs);
+        update_gtod(cur_tb, new_stamp_xsec, do_gtod.varp->tb_to_xs);
+}
+
+#ifdef CONFIG_SMP
+unsigned long profile_pc(struct pt_regs *regs)
+{
+        unsigned long pc = instruction_pointer(regs);
+
+        if (in_lock_functions(pc))
+                return regs->link;
+
+        return pc;
+}
+EXPORT_SYMBOL(profile_pc);
+#endif
+
+#ifdef CONFIG_PPC_ISERIES
+
+/* 
+ * This function recalibrates the timebase based on the 49-bit time-of-day
+ * value in the Titan chip.  The Titan is much more accurate than the value
+ * returned by the service processor for the timebase frequency.  
+ */
+
+static void iSeries_tb_recal(void)
+{
+        struct div_result divres;
+        unsigned long titan, tb;
+        tb = get_tb();
+        titan = HvCallXm_loadTod();
+        if ( iSeries_recal_titan ) {
+                unsigned long tb_ticks = tb - iSeries_recal_tb;
+                unsigned long titan_usec = (titan - iSeries_recal_titan) >> 12;
+                unsigned long new_tb_ticks_per_sec   = (tb_ticks * USEC_PER_SEC)/titan_usec;
+                unsigned long new_tb_ticks_per_jiffy = (new_tb_ticks_per_sec+(HZ/2))/HZ;
+                long tick_diff = new_tb_ticks_per_jiffy - tb_ticks_per_jiffy;
+                char sign = '+';                
+                /* make sure tb_ticks_per_sec and tb_ticks_per_jiffy are consistent */
+                new_tb_ticks_per_sec = new_tb_ticks_per_jiffy * HZ;
+
+                if ( tick_diff < 0 ) {
+                        tick_diff = -tick_diff;
+                        sign = '-';
+                }
+                if ( tick_diff ) {
+                        if ( tick_diff < tb_ticks_per_jiffy/25 ) {
+                                printk( "Titan recalibrate: new tb_ticks_per_jiffy = %lu (%c%ld)\n",
+                                                new_tb_ticks_per_jiffy, sign, tick_diff );
+                                tb_ticks_per_jiffy = new_tb_ticks_per_jiffy;
+                                tb_ticks_per_sec   = new_tb_ticks_per_sec;
+                                div128_by_32( XSEC_PER_SEC, 0, tb_ticks_per_sec, &divres );
+                                do_gtod.tb_ticks_per_sec = tb_ticks_per_sec;
+                                tb_to_xs = divres.result_low;
+                                do_gtod.varp->tb_to_xs = tb_to_xs;
+                                systemcfg->tb_ticks_per_sec = tb_ticks_per_sec;
+                                systemcfg->tb_to_xs = tb_to_xs;
+                        }
+                        else {
+                                printk( "Titan recalibrate: FAILED (difference > 4 percent)\n"
+                                        "                   new tb_ticks_per_jiffy = %lu\n"
+                                        "                   old tb_ticks_per_jiffy = %lu\n",
+                                        new_tb_ticks_per_jiffy, tb_ticks_per_jiffy );
+                        }
+                }
+        }
+        iSeries_recal_titan = titan;
+        iSeries_recal_tb = tb;
+}
+#endif
+
+/*
+ * For iSeries shared processors, we have to let the hypervisor
+ * set the hardware decrementer.  We set a virtual decrementer
+ * in the lppaca and call the hypervisor if the virtual
+ * decrementer is less than the current value in the hardware
+ * decrementer. (almost always the new decrementer value will
+ * be greater than the current hardware decementer so the hypervisor
+ * call will not be needed)
+ */
+
+u64 tb_last_stamp __cacheline_aligned_in_smp;
+
+/*
+ * Note that on ppc32 this only stores the bottom 32 bits of
+ * the timebase value, but that's enough to tell when a jiffy
+ * has passed.
+ */
+DEFINE_PER_CPU(unsigned long, last_jiffy);
+
+/*
+ * timer_interrupt - gets called when the decrementer overflows,
+ * with interrupts disabled.
+ */
+void timer_interrupt(struct pt_regs * regs)
+{
+        int next_dec;
+        int cpu = smp_processor_id();
+        unsigned long ticks;
+
+#ifdef CONFIG_PPC32
+        if (atomic_read(&ppc_n_lost_interrupts) != 0)
+                do_IRQ(regs);
+#endif
+
+        irq_enter();
+
+        profile_tick(CPU_PROFILING, regs);
+
+#ifdef CONFIG_PPC_ISERIES
+        get_paca()->lppaca.int_dword.fields.decr_int = 0;
+#endif
+
+        while ((ticks = tb_ticks_since(per_cpu(last_jiffy, cpu)))
+               >= tb_ticks_per_jiffy) {
+                /* Update last_jiffy */
+                per_cpu(last_jiffy, cpu) += tb_ticks_per_jiffy;
+                /* Handle RTCL overflow on 601 */
+                if (__USE_RTC() && per_cpu(last_jiffy, cpu) >= 1000000000)
+                        per_cpu(last_jiffy, cpu) -= 1000000000;
+
+                /*
+                 * We cannot disable the decrementer, so in the period
+                 * between this cpu's being marked offline in cpu_online_map
+                 * and calling stop-self, it is taking timer interrupts.
+                 * Avoid calling into the scheduler rebalancing code if this
+                 * is the case.
+                 */
+                if (!cpu_is_offline(cpu))
+                        update_process_times(user_mode(regs));
+
+                /*
+                 * No need to check whether cpu is offline here; boot_cpuid
+                 * should have been fixed up by now.
+                 */
+                if (cpu != boot_cpuid)
+                        continue;
+
+                write_seqlock(&xtime_lock);
+                tb_last_stamp += tb_ticks_per_jiffy;
+                timer_recalc_offset(tb_last_stamp);
+                do_timer(regs);
+                timer_sync_xtime(tb_last_stamp);
+                timer_check_rtc();
+                write_sequnlock(&xtime_lock);
+                if (adjusting_time && (time_adjust == 0))
+                        ppc_adjtimex();
+        }
+        
+        next_dec = tb_ticks_per_jiffy - ticks;
+        set_dec(next_dec);
+
+#ifdef CONFIG_PPC_ISERIES
+        if (hvlpevent_is_pending())
+                process_hvlpevents(regs);
+#endif
+
+#ifdef CONFIG_PPC64
+        /* collect purr register values often, for accurate calculations */
+        if (firmware_has_feature(FW_FEATURE_SPLPAR)) {
+                struct cpu_usage *cu = &__get_cpu_var(cpu_usage_array);
+                cu->current_tb = mfspr(SPRN_PURR);
+        }
+#endif
+
+        irq_exit();
+}
+
+void wakeup_decrementer(void)
+{
+        int i;
+
+        set_dec(tb_ticks_per_jiffy);
+        /*
+         * We don't expect this to be called on a machine with a 601,
+         * so using get_tbl is fine.
+         */
+        tb_last_stamp = get_tb();
+        for_each_cpu(i)
+                per_cpu(last_jiffy, i) = tb_last_stamp;
+}
+
+#ifdef CONFIG_SMPxxx
+void __init smp_space_timers(unsigned int max_cpus)
+{
+        int i;
+        unsigned long offset = tb_ticks_per_jiffy / max_cpus;
+        unsigned long previous_tb = per_cpu(last_jiffy, boot_cpuid);
+
+        for_each_cpu(i) {
+                if (i != boot_cpuid) {
+                        previous_tb += offset;
+                        per_cpu(last_jiffy, i) = previous_tb;
+                }
+        }
+}
+#endif
+
+/*
+ * Scheduler clock - returns current time in nanosec units.
+ *
+ * Note: mulhdu(a, b) (multiply high double unsigned) returns
+ * the high 64 bits of a * b, i.e. (a * b) >> 64, where a and b
+ * are 64-bit unsigned numbers.
+ */
+unsigned long long sched_clock(void)
+{
+        return mulhdu(get_tb(), tb_to_ns_scale) << tb_to_ns_shift;
+}
+
+int do_settimeofday(struct timespec *tv)
+{
+        time_t wtm_sec, new_sec = tv->tv_sec;
+        long wtm_nsec, new_nsec = tv->tv_nsec;
+        unsigned long flags;
+        long int tb_delta;
+        u64 new_xsec;
+
+        if ((unsigned long)tv->tv_nsec >= NSEC_PER_SEC)
+                return -EINVAL;
+
+        write_seqlock_irqsave(&xtime_lock, flags);
+
+        /*
+         * Updating the RTC is not the job of this code. If the time is
+         * stepped under NTP, the RTC will be updated after STA_UNSYNC
+         * is cleared.  Tools like clock/hwclock either copy the RTC
+         * to the system time, in which case there is no point in writing
+         * to the RTC again, or write to the RTC but then they don't call
+         * settimeofday to perform this operation.
+         */
+#ifdef CONFIG_PPC_ISERIES
+        if (first_settimeofday) {
+                iSeries_tb_recal();
+                first_settimeofday = 0;
+        }
+#endif
+        tb_delta = tb_ticks_since(tb_last_stamp);
+        tb_delta += (jiffies - wall_jiffies) * tb_ticks_per_jiffy;
+
+        new_nsec -= 1000 * mulhwu(tb_to_us, tb_delta);
+
+        wtm_sec  = wall_to_monotonic.tv_sec + (xtime.tv_sec - new_sec);
+        wtm_nsec = wall_to_monotonic.tv_nsec + (xtime.tv_nsec - new_nsec);
+
+        set_normalized_timespec(&xtime, new_sec, new_nsec);
+        set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec);
+
+        /* In case of a large backwards jump in time with NTP, we want the 
+         * clock to be updated as soon as the PLL is again in lock.
+         */
+        last_rtc_update = new_sec - 658;
+
+        ntp_clear();
+
+        new_xsec = (u64)new_nsec * XSEC_PER_SEC;
+        do_div(new_xsec, NSEC_PER_SEC);
+        new_xsec += (u64)new_sec * XSEC_PER_SEC;
+        update_gtod(tb_last_stamp, new_xsec, do_gtod.varp->tb_to_xs);
+
+#ifdef CONFIG_PPC64
+        systemcfg->tz_minuteswest = sys_tz.tz_minuteswest;
+        systemcfg->tz_dsttime = sys_tz.tz_dsttime;
+#endif
+
+        write_sequnlock_irqrestore(&xtime_lock, flags);
+        clock_was_set();
+        return 0;
+}
+
+EXPORT_SYMBOL(do_settimeofday);
+
+#if defined(CONFIG_PPC_PSERIES) || defined(CONFIG_PPC_MAPLE) || defined(CONFIG_PPC_BPA) || defined(CONFIG_PPC_ISERIES)
+void __init generic_calibrate_decr(void)
+{
+        struct device_node *cpu;
+        struct div_result divres;
+        unsigned int *fp;
+        int node_found;
+
+        /*
+         * The cpu node should have a timebase-frequency property
+         * to tell us the rate at which the decrementer counts.
+         */
+        cpu = of_find_node_by_type(NULL, "cpu");
+
+        ppc_tb_freq = DEFAULT_TB_FREQ;          /* hardcoded default */
+        node_found = 0;
+        if (cpu != 0) {
+                fp = (unsigned int *)get_property(cpu, "timebase-frequency",
+                                                  NULL);
+                if (fp != 0) {
+                        node_found = 1;
+                        ppc_tb_freq = *fp;
+                }
+        }
+        if (!node_found)
+                printk(KERN_ERR "WARNING: Estimating decrementer frequency "
+                                "(not found)\n");
+
+        ppc_proc_freq = DEFAULT_PROC_FREQ;
+        node_found = 0;
+        if (cpu != 0) {
+                fp = (unsigned int *)get_property(cpu, "clock-frequency",
+                                                  NULL);
+                if (fp != 0) {
+                        node_found = 1;
+                        ppc_proc_freq = *fp;
+                }
+        }
+        if (!node_found)
+                printk(KERN_ERR "WARNING: Estimating processor frequency "
+                                "(not found)\n");
+
+        of_node_put(cpu);
+
+        printk(KERN_INFO "time_init: decrementer frequency = %lu.%.6lu MHz\n",
+               ppc_tb_freq/1000000, ppc_tb_freq%1000000);
+        printk(KERN_INFO "time_init: processor frequency   = %lu.%.6lu MHz\n",
+               ppc_proc_freq/1000000, ppc_proc_freq%1000000);
+
+        tb_ticks_per_jiffy = ppc_tb_freq / HZ;
+        tb_ticks_per_sec = tb_ticks_per_jiffy * HZ;
+        tb_ticks_per_usec = ppc_tb_freq / 1000000;
+        tb_to_us = mulhwu_scale_factor(ppc_tb_freq, 1000000);
+        div128_by_32(1024*1024, 0, tb_ticks_per_sec, &divres);
+        tb_to_xs = divres.result_low;
+}
+#endif
+
+unsigned long get_boot_time(void)
+{
+        struct rtc_time tm;
+
+        if (ppc_md.get_boot_time)
+                return ppc_md.get_boot_time();
+        if (!ppc_md.get_rtc_time)
+                return 0;
+        ppc_md.get_rtc_time(&tm);
+        return mktime(tm.tm_year+1900, tm.tm_mon+1, tm.tm_mday,
+                      tm.tm_hour, tm.tm_min, tm.tm_sec);
+}
+
+/* This function is only called on the boot processor */
+void __init time_init(void)
+{
+        unsigned long flags;
+        unsigned long tm = 0;
+        struct div_result res;
+        u64 scale;
+        unsigned shift;
+
+        if (ppc_md.time_init != NULL)
+                timezone_offset = ppc_md.time_init();
+
+        ppc_md.calibrate_decr();
+
+#ifdef CONFIG_PPC64
+        get_paca()->default_decr = tb_ticks_per_jiffy;
+#endif
+
+        /*
+         * Compute scale factor for sched_clock.
+         * The calibrate_decr() function has set tb_ticks_per_sec,
+         * which is the timebase frequency.
+         * We compute 1e9 * 2^64 / tb_ticks_per_sec and interpret
+         * the 128-bit result as a 64.64 fixed-point number.
+         * We then shift that number right until it is less than 1.0,
+         * giving us the scale factor and shift count to use in
+         * sched_clock().
+         */
+        div128_by_32(1000000000, 0, tb_ticks_per_sec, &res);
+        scale = res.result_low;
+        for (shift = 0; res.result_high != 0; ++shift) {
+                scale = (scale >> 1) | (res.result_high << 63);
+                res.result_high >>= 1;
+        }
+        tb_to_ns_scale = scale;
+        tb_to_ns_shift = shift;
+
+#ifdef CONFIG_PPC_ISERIES
+        if (!piranha_simulator)
+#endif
+                tm = get_boot_time();
+
+        write_seqlock_irqsave(&xtime_lock, flags);
+        xtime.tv_sec = tm;
+        xtime.tv_nsec = 0;
+        tb_last_stamp = get_tb();
+        do_gtod.varp = &do_gtod.vars[0];
+        do_gtod.var_idx = 0;
+        do_gtod.varp->tb_orig_stamp = tb_last_stamp;
+        __get_cpu_var(last_jiffy) = tb_last_stamp;
+        do_gtod.varp->stamp_xsec = (u64) xtime.tv_sec * XSEC_PER_SEC;
+        do_gtod.tb_ticks_per_sec = tb_ticks_per_sec;
+        do_gtod.varp->tb_to_xs = tb_to_xs;
+        do_gtod.tb_to_us = tb_to_us;
+#ifdef CONFIG_PPC64
+        systemcfg->tb_orig_stamp = tb_last_stamp;
+        systemcfg->tb_update_count = 0;
+        systemcfg->tb_ticks_per_sec = tb_ticks_per_sec;
+        systemcfg->stamp_xsec = xtime.tv_sec * XSEC_PER_SEC;
+        systemcfg->tb_to_xs = tb_to_xs;
+#endif
+
+        time_freq = 0;
+
+        /* If platform provided a timezone (pmac), we correct the time */
+        if (timezone_offset) {
+                sys_tz.tz_minuteswest = -timezone_offset / 60;
+                sys_tz.tz_dsttime = 0;
+                xtime.tv_sec -= timezone_offset;
+        }
+
+        last_rtc_update = xtime.tv_sec;
+        set_normalized_timespec(&wall_to_monotonic,
+                                -xtime.tv_sec, -xtime.tv_nsec);
+        write_sequnlock_irqrestore(&xtime_lock, flags);
+
+        /* Not exact, but the timer interrupt takes care of this */
+        set_dec(tb_ticks_per_jiffy);
+}
+
+/* 
+ * After adjtimex is called, adjust the conversion of tb ticks
+ * to microseconds to keep do_gettimeofday synchronized 
+ * with ntpd.
+ *
+ * Use the time_adjust, time_freq and time_offset computed by adjtimex to 
+ * adjust the frequency.
+ */
+
+/* #define DEBUG_PPC_ADJTIMEX 1 */
+
+void ppc_adjtimex(void)
+{
+#ifdef CONFIG_PPC64
+        unsigned long den, new_tb_ticks_per_sec, tb_ticks, old_xsec,
+                new_tb_to_xs, new_xsec, new_stamp_xsec;
+        unsigned long tb_ticks_per_sec_delta;
+        long delta_freq, ltemp;
+        struct div_result divres; 
+        unsigned long flags;
+        long singleshot_ppm = 0;
+
+        /*
+         * Compute parts per million frequency adjustment to
+         * accomplish the time adjustment implied by time_offset to be
+         * applied over the elapsed time indicated by time_constant.
+         * Use SHIFT_USEC to get it into the same units as
+         * time_freq.
+         */
+        if ( time_offset < 0 ) {
+                ltemp = -time_offset;
+                ltemp <<= SHIFT_USEC - SHIFT_UPDATE;
+                ltemp >>= SHIFT_KG + time_constant;
+                ltemp = -ltemp;
+        } else {
+                ltemp = time_offset;
+                ltemp <<= SHIFT_USEC - SHIFT_UPDATE;
+                ltemp >>= SHIFT_KG + time_constant;
+        }
+        
+        /* If there is a single shot time adjustment in progress */
+        if ( time_adjust ) {
+#ifdef DEBUG_PPC_ADJTIMEX
+                printk("ppc_adjtimex: ");
+                if ( adjusting_time == 0 )
+                        printk("starting ");
+                printk("single shot time_adjust = %ld\n", time_adjust);
+#endif  
+        
+                adjusting_time = 1;
+                
+                /*
+                 * Compute parts per million frequency adjustment
+                 * to match time_adjust
+                 */
+                singleshot_ppm = tickadj * HZ;  
+                /*
+                 * The adjustment should be tickadj*HZ to match the code in
+                 * linux/kernel/timer.c, but experiments show that this is too
+                 * large. 3/4 of tickadj*HZ seems about right
+                 */
+                singleshot_ppm -= singleshot_ppm / 4;
+                /* Use SHIFT_USEC to get it into the same units as time_freq */
+                singleshot_ppm <<= SHIFT_USEC;
+                if ( time_adjust < 0 )
+                        singleshot_ppm = -singleshot_ppm;
+        }
+        else {
+#ifdef DEBUG_PPC_ADJTIMEX
+                if ( adjusting_time )
+                        printk("ppc_adjtimex: ending single shot time_adjust\n");
+#endif
+                adjusting_time = 0;
+        }
+        
+        /* Add up all of the frequency adjustments */
+        delta_freq = time_freq + ltemp + singleshot_ppm;
+        
+        /*
+         * Compute a new value for tb_ticks_per_sec based on
+         * the frequency adjustment
+         */
+        den = 1000000 * (1 << (SHIFT_USEC - 8));
+        if ( delta_freq < 0 ) {
+                tb_ticks_per_sec_delta = ( tb_ticks_per_sec * ( (-delta_freq) >> (SHIFT_USEC - 8))) / den;
+                new_tb_ticks_per_sec = tb_ticks_per_sec + tb_ticks_per_sec_delta;
+        }
+        else {
+                tb_ticks_per_sec_delta = ( tb_ticks_per_sec * ( delta_freq >> (SHIFT_USEC - 8))) / den;
+                new_tb_ticks_per_sec = tb_ticks_per_sec - tb_ticks_per_sec_delta;
+        }
+        
+#ifdef DEBUG_PPC_ADJTIMEX
+        printk("ppc_adjtimex: ltemp = %ld, time_freq = %ld, singleshot_ppm = %ld\n", ltemp, time_freq, singleshot_ppm);
+        printk("ppc_adjtimex: tb_ticks_per_sec - base = %ld  new = %ld\n", tb_ticks_per_sec, new_tb_ticks_per_sec);
+#endif
+
+        /*
+         * Compute a new value of tb_to_xs (used to convert tb to
+         * microseconds) and a new value of stamp_xsec which is the
+         * time (in 1/2^20 second units) corresponding to
+         * tb_orig_stamp.  This new value of stamp_xsec compensates
+         * for the change in frequency (implied by the new tb_to_xs)
+         * which guarantees that the current time remains the same.
+         */
+        write_seqlock_irqsave( &xtime_lock, flags );
+        tb_ticks = get_tb() - do_gtod.varp->tb_orig_stamp;
+        div128_by_32(1024*1024, 0, new_tb_ticks_per_sec, &divres);
+        new_tb_to_xs = divres.result_low;
+        new_xsec = mulhdu(tb_ticks, new_tb_to_xs);
+
+        old_xsec = mulhdu(tb_ticks, do_gtod.varp->tb_to_xs);
+        new_stamp_xsec = do_gtod.varp->stamp_xsec + old_xsec - new_xsec;
+
+        update_gtod(do_gtod.varp->tb_orig_stamp, new_stamp_xsec, new_tb_to_xs);
+
+        write_sequnlock_irqrestore( &xtime_lock, flags );
+#endif /* CONFIG_PPC64 */
+}
+
+
+#define FEBRUARY        2
+#define STARTOFTIME     1970
+#define SECDAY          86400L
+#define SECYR           (SECDAY * 365)
+#define leapyear(year)          ((year) % 4 == 0 && \
+                                 ((year) % 100 != 0 || (year) % 400 == 0))
+#define days_in_year(a)         (leapyear(a) ? 366 : 365)
+#define days_in_month(a)        (month_days[(a) - 1])
+
+static int month_days[12] = {
+        31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31
+};
+
+/*
+ * This only works for the Gregorian calendar - i.e. after 1752 (in the UK)
+ */
+void GregorianDay(struct rtc_time * tm)
+{
+        int leapsToDate;
+        int lastYear;
+        int day;
+        int MonthOffset[] = { 0, 31, 59, 90, 120, 151, 181, 212, 243, 273, 304, 334 };
+
+        lastYear = tm->tm_year - 1;
+
+        /*
+         * Number of leap corrections to apply up to end of last year
+         */
+        leapsToDate = lastYear / 4 - lastYear / 100 + lastYear / 400;
+
+        /*
+         * This year is a leap year if it is divisible by 4 except when it is
+         * divisible by 100 unless it is divisible by 400
+         *
+         * e.g. 1904 was a leap year, 1900 was not, 1996 is, and 2000 was
+         */
+        day = tm->tm_mon > 2 && leapyear(tm->tm_year);
+
+        day += lastYear*365 + leapsToDate + MonthOffset[tm->tm_mon-1] +
+                   tm->tm_mday;
+
+        tm->tm_wday = day % 7;
+}
+
+void to_tm(int tim, struct rtc_time * tm)
+{
+        register int    i;
+        register long   hms, day;
+
+        day = tim / SECDAY;
+        hms = tim % SECDAY;
+
+        /* Hours, minutes, seconds are easy */
+        tm->tm_hour = hms / 3600;
+        tm->tm_min = (hms % 3600) / 60;
+        tm->tm_sec = (hms % 3600) % 60;
+
+        /* Number of years in days */
+        for (i = STARTOFTIME; day >= days_in_year(i); i++)
+                day -= days_in_year(i);
+        tm->tm_year = i;
+
+        /* Number of months in days left */
+        if (leapyear(tm->tm_year))
+                days_in_month(FEBRUARY) = 29;
+        for (i = 1; day >= days_in_month(i); i++)
+                day -= days_in_month(i);
+        days_in_month(FEBRUARY) = 28;
+        tm->tm_mon = i;
+
+        /* Days are what is left over (+1) from all that. */
+        tm->tm_mday = day + 1;
+
+        /*
+         * Determine the day of week
+         */
+        GregorianDay(tm);
+}
+
+/* Auxiliary function to compute scaling factors */
+/* Actually the choice of a timebase running at 1/4 the of the bus
+ * frequency giving resolution of a few tens of nanoseconds is quite nice.
+ * It makes this computation very precise (27-28 bits typically) which
+ * is optimistic considering the stability of most processor clock
+ * oscillators and the precision with which the timebase frequency
+ * is measured but does not harm.
+ */
+unsigned mulhwu_scale_factor(unsigned inscale, unsigned outscale)
+{
+        unsigned mlt=0, tmp, err;
+        /* No concern for performance, it's done once: use a stupid
+         * but safe and compact method to find the multiplier.
+         */
+  
+        for (tmp = 1U<<31; tmp != 0; tmp >>= 1) {
+                if (mulhwu(inscale, mlt|tmp) < outscale)
+                        mlt |= tmp;
+        }
+  
+        /* We might still be off by 1 for the best approximation.
+         * A side effect of this is that if outscale is too large
+         * the returned value will be zero.
+         * Many corner cases have been checked and seem to work,
+         * some might have been forgotten in the test however.
+         */
+  
+        err = inscale * (mlt+1);
+        if (err <= inscale/2)
+                mlt++;
+        return mlt;
+}
+
+/*
+ * Divide a 128-bit dividend by a 32-bit divisor, leaving a 128 bit
+ * result.
+ */
+void div128_by_32(u64 dividend_high, u64 dividend_low,
+                  unsigned divisor, struct div_result *dr)
+{
+        unsigned long a, b, c, d;
+        unsigned long w, x, y, z;
+        u64 ra, rb, rc;
+
+        a = dividend_high >> 32;
+        b = dividend_high & 0xffffffff;
+        c = dividend_low >> 32;
+        d = dividend_low & 0xffffffff;
+
+        w = a / divisor;
+        ra = ((u64)(a - (w * divisor)) << 32) + b;
+
+#ifdef CONFIG_PPC64
+        x = ra / divisor;
+        rb = ((ra - (x * divisor)) << 32) + c;
+
+        y = rb / divisor;
+        rc = ((rb - (y * divisor)) << 32) + d;
+
+        z = rc / divisor;
+#else
+        /* for 32-bit, use do_div from div64.h */
+        rb = ((u64) do_div(ra, divisor) << 32) + c;
+        x = ra;
+
+        rc = ((u64) do_div(rb, divisor) << 32) + d;
+        y = rb;
+
+        do_div(rc, divisor);
+        z = rc;
+#endif
+
+        dr->result_high = ((u64)w << 32) + x;
+        dr->result_low  = ((u64)y << 32) + z;
+
+}
+
diff --git a/arch/powerpc/platforms/powermac/cpufreq.c b/arch/powerpc/platforms/powermac/cpufreq.c
index bcd9224f3f90..c47f8b69725c 100644
--- a/arch/powerpc/platforms/powermac/cpufreq.c
+++ b/arch/powerpc/platforms/powermac/cpufreq.c
@@ -110,15 +110,6 @@ static inline void local_delay(unsigned long ms)
                 msleep(ms);
 }
 
-static inline void wakeup_decrementer(void)
-{
-        set_dec(tb_ticks_per_jiffy);
-        /* No currently-supported powerbook has a 601,
-         * so use get_tbl, not native
-         */
-        last_jiffy_stamp(0) = tb_last_stamp = get_tbl();
-}
-
 #ifdef DEBUG_FREQ
 static inline void debug_calc_bogomips(void)
 {
diff --git a/arch/powerpc/platforms/powermac/time.c b/arch/powerpc/platforms/powermac/time.c
index 3ee6d8aa14c4..eb9969b52f96 100644
--- a/arch/powerpc/platforms/powermac/time.c
+++ b/arch/powerpc/platforms/powermac/time.c
@@ -6,6 +6,8 @@
  *
  * Paul Mackerras       August 1996.
  * Copyright (C) 1996 Paul Mackerras.
+ * Copyright (C) 2003-2005 Benjamin Herrenschmidt.
+ *
  */
 #include <linux/config.h>
 #include <linux/errno.h>
@@ -19,7 +21,9 @@
 #include <linux/adb.h>
 #include <linux/cuda.h>
 #include <linux/pmu.h>
+#include <linux/interrupt.h>
 #include <linux/hardirq.h>
+#include <linux/rtc.h>
 
 #include <asm/sections.h>
 #include <asm/prom.h>
@@ -30,6 +34,14 @@
 #include <asm/time.h>
 #include <asm/nvram.h>
 
+#undef DEBUG
+
+#ifdef DEBUG
+#define DBG(x...) printk(x)
+#else
+#define DBG(x...)
+#endif
+
 /* Apparently the RTC stores seconds since 1 Jan 1904 */
 #define RTC_OFFSET      2082844800
 
@@ -54,10 +66,7 @@
 /* Bits in IFR and IER */
 #define T1_INT          0x40            /* Timer 1 interrupt */
 
-extern struct timezone sys_tz;
-
-long __init
-pmac_time_init(void)
+long __init pmac_time_init(void)
 {
 #ifdef CONFIG_NVRAM
         s32 delta = 0;
@@ -210,7 +219,7 @@ via_calibrate_decr(void)
         tb_ticks_per_jiffy = (dstart - dend) / ((6 * HZ)/100);
         tb_to_us = mulhwu_scale_factor(dstart - dend, 60000);
 
-        printk(KERN_INFO "via_calibrate_decr: ticks per jiffy = %u (%u ticks)\n",
+        printk(KERN_INFO "via_calibrate_decr: ticks per jiffy = %lu (%u ticks)\n",
                tb_ticks_per_jiffy, dstart - dend);
 
         iounmap(via);
@@ -228,6 +237,7 @@ time_sleep_notify(struct pmu_sleep_notifier *self, int when)
         static unsigned long time_diff;
         unsigned long flags;
         unsigned long seq;
+        struct timespec tv;
 
         switch (when) {
         case PBOOK_SLEEP_NOW:
@@ -237,11 +247,9 @@ time_sleep_notify(struct pmu_sleep_notifier *self, int when)
                 } while (read_seqretry_irqrestore(&xtime_lock, seq, flags));
                 break;
         case PBOOK_WAKE:
-                write_seqlock_irqsave(&xtime_lock, flags);
-                xtime.tv_sec = pmac_get_rtc_time() + time_diff;
-                xtime.tv_nsec = 0;
-                last_rtc_update = xtime.tv_sec;
-                write_sequnlock_irqrestore(&xtime_lock, flags);
+                tv.tv_sec = pmac_get_boot_time() + time_diff;
+                tv.tv_nsec = 0;
+                do_settimeofday(&tv);
                 break;
         }
         return PBOOK_SLEEP_OK;