3 files changed, 116 insertions, 63 deletions

diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c
index afe8dbc964aa..5c64ccd402e2 100644
--- a/arch/powerpc/sysdev/fsl_soc.c
+++ b/arch/powerpc/sysdev/fsl_soc.c
@@ -208,52 +208,6 @@ static int __init of_add_fixed_phys(void)
 arch_initcall(of_add_fixed_phys);
 #endif /* CONFIG_FIXED_PHY */
 
-#ifdef CONFIG_PPC_83xx
-static int __init mpc83xx_wdt_init(void)
-{
-        struct resource r;
-        struct device_node *np;
-        struct platform_device *dev;
-        u32 freq = fsl_get_sys_freq();
-        int ret;
-
-        np = of_find_compatible_node(NULL, "watchdog", "mpc83xx_wdt");
-
-        if (!np) {
-                ret = -ENODEV;
-                goto nodev;
-        }
-
-        memset(&r, 0, sizeof(r));
-
-        ret = of_address_to_resource(np, 0, &r);
-        if (ret)
-                goto err;
-
-        dev = platform_device_register_simple("mpc83xx_wdt", 0, &r, 1);
-        if (IS_ERR(dev)) {
-                ret = PTR_ERR(dev);
-                goto err;
-        }
-
-        ret = platform_device_add_data(dev, &freq, sizeof(freq));
-        if (ret)
-                goto unreg;
-
-        of_node_put(np);
-        return 0;
-
-unreg:
-        platform_device_unregister(dev);
-err:
-        of_node_put(np);
-nodev:
-        return ret;
-}
-
-arch_initcall(mpc83xx_wdt_init);
-#endif
-
 static enum fsl_usb2_phy_modes determine_usb_phy(const char *phy_type)
 {
         if (!phy_type)
diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c
index 21b956701596..0efc12d1a3d7 100644
--- a/arch/powerpc/sysdev/mpic.c
+++ b/arch/powerpc/sysdev/mpic.c
@@ -1057,13 +1057,6 @@ struct mpic * __init mpic_alloc(struct device_node *node,
         memset(mpic, 0, sizeof(struct mpic));
         mpic->name = name;
 
-        mpic->irqhost = irq_alloc_host(node, IRQ_HOST_MAP_LINEAR,
-                                       isu_size, &mpic_host_ops,
-                                       flags & MPIC_LARGE_VECTORS ? 2048 : 256);
-        if (mpic->irqhost == NULL)
-                return NULL;
-
-        mpic->irqhost->host_data = mpic;
         mpic->hc_irq = mpic_irq_chip;
         mpic->hc_irq.typename = name;
         if (flags & MPIC_PRIMARY)
@@ -1213,6 +1206,15 @@ struct mpic * __init mpic_alloc(struct device_node *node,
         mpic->isu_shift = 1 + __ilog2(mpic->isu_size - 1);
         mpic->isu_mask = (1 << mpic->isu_shift) - 1;
 
+        mpic->irqhost = irq_alloc_host(node, IRQ_HOST_MAP_LINEAR,
+                                       isu_size ? isu_size : mpic->num_sources,
+                                       &mpic_host_ops,
+                                       flags & MPIC_LARGE_VECTORS ? 2048 : 256);
+        if (mpic->irqhost == NULL)
+                return NULL;
+
+        mpic->irqhost->host_data = mpic;
+
         /* Display version */
         switch (greg_feature & MPIC_GREG_FEATURE_VERSION_MASK) {
         case 1:
diff --git a/arch/powerpc/sysdev/xilinx_intc.c b/arch/powerpc/sysdev/xilinx_intc.c
index a22e1a2df1af..c658b413c9b4 100644
--- a/arch/powerpc/sysdev/xilinx_intc.c
+++ b/arch/powerpc/sysdev/xilinx_intc.c
@@ -41,8 +41,32 @@
 
 static struct irq_host *master_irqhost;
 
+#define XILINX_INTC_MAXIRQS     (32)
+
+/* The following table allows the interrupt type, edge or level,
+ * to be cached after being read from the device tree until the interrupt
+ * is mapped
+ */
+static int xilinx_intc_typetable[XILINX_INTC_MAXIRQS];
+
+/* Map the interrupt type from the device tree to the interrupt types
+ * used by the interrupt subsystem
+ */
+static unsigned char xilinx_intc_map_senses[] = {
+        IRQ_TYPE_EDGE_RISING,
+        IRQ_TYPE_EDGE_FALLING,
+        IRQ_TYPE_LEVEL_HIGH,
+        IRQ_TYPE_LEVEL_LOW,
+};
+
 /*
- * IRQ Chip operations
+ * The interrupt controller is setup such that it doesn't work well with
+ * the level interrupt handler in the kernel because the handler acks the
+ * interrupt before calling the application interrupt handler. To deal with
+ * that, we use 2 different irq chips so that different functions can be
+ * used for level and edge type interrupts.
+ *
+ * IRQ Chip common (across level and edge) operations
  */
 static void xilinx_intc_mask(unsigned int virq)
 {
@@ -52,15 +76,54 @@ static void xilinx_intc_mask(unsigned int virq)
         out_be32(regs + XINTC_CIE, 1 << irq);
 }
 
-static void xilinx_intc_unmask(unsigned int virq)
+static int xilinx_intc_set_type(unsigned int virq, unsigned int flow_type)
+{
+        struct irq_desc *desc = get_irq_desc(virq);
+
+        desc->status &= ~(IRQ_TYPE_SENSE_MASK | IRQ_LEVEL);
+        desc->status |= flow_type & IRQ_TYPE_SENSE_MASK;
+        if (flow_type & (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW))
+                desc->status |= IRQ_LEVEL;
+        return 0;
+}
+
+/*
+ * IRQ Chip level operations
+ */
+static void xilinx_intc_level_unmask(unsigned int virq)
 {
         int irq = virq_to_hw(virq);
         void * regs = get_irq_chip_data(virq);
         pr_debug("unmask: %d\n", irq);
         out_be32(regs + XINTC_SIE, 1 << irq);
+
+        /* ack level irqs because they can't be acked during
+         * ack function since the handle_level_irq function
+         * acks the irq before calling the inerrupt handler
+         */
+        out_be32(regs + XINTC_IAR, 1 << irq);
 }
 
-static void xilinx_intc_ack(unsigned int virq)
+static struct irq_chip xilinx_intc_level_irqchip = {
+        .typename = "Xilinx Level INTC",
+        .mask = xilinx_intc_mask,
+        .mask_ack = xilinx_intc_mask,
+        .unmask = xilinx_intc_level_unmask,
+        .set_type = xilinx_intc_set_type,
+};
+
+/*
+ * IRQ Chip edge operations
+ */
+static void xilinx_intc_edge_unmask(unsigned int virq)
+{
+        int irq = virq_to_hw(virq);
+        void *regs = get_irq_chip_data(virq);
+        pr_debug("unmask: %d\n", irq);
+        out_be32(regs + XINTC_SIE, 1 << irq);
+}
+
+static void xilinx_intc_edge_ack(unsigned int virq)
 {
         int irq = virq_to_hw(virq);
         void * regs = get_irq_chip_data(virq);
@@ -68,27 +131,60 @@ static void xilinx_intc_ack(unsigned int virq)
         out_be32(regs + XINTC_IAR, 1 << irq);
 }
 
-static struct irq_chip xilinx_intc_irqchip = {
-        .typename = "Xilinx INTC",
+static struct irq_chip xilinx_intc_edge_irqchip = {
+        .typename = "Xilinx Edge  INTC",
         .mask = xilinx_intc_mask,
-        .unmask = xilinx_intc_unmask,
-        .ack = xilinx_intc_ack,
+        .unmask = xilinx_intc_edge_unmask,
+        .ack = xilinx_intc_edge_ack,
+        .set_type = xilinx_intc_set_type,
 };
 
 /*
  * IRQ Host operations
  */
+
+/**
+ * xilinx_intc_xlate - translate virq# from device tree interrupts property
+ */
+static int xilinx_intc_xlate(struct irq_host *h, struct device_node *ct,
+                                u32 *intspec, unsigned int intsize,
+                                irq_hw_number_t *out_hwirq,
+                                unsigned int *out_flags)
+{
+        if ((intsize < 2) || (intspec[0] >= XILINX_INTC_MAXIRQS))
+                return -EINVAL;
+
+        /* keep a copy of the interrupt type til the interrupt is mapped
+         */
+        xilinx_intc_typetable[intspec[0]] = xilinx_intc_map_senses[intspec[1]];
+
+        /* Xilinx uses 2 interrupt entries, the 1st being the h/w
+         * interrupt number, the 2nd being the interrupt type, edge or level
+         */
+        *out_hwirq = intspec[0];
+        *out_flags = xilinx_intc_map_senses[intspec[1]];
+
+        return 0;
+}
 static int xilinx_intc_map(struct irq_host *h, unsigned int virq,
                                   irq_hw_number_t irq)
 {
         set_irq_chip_data(virq, h->host_data);
-        set_irq_chip_and_handler(virq, &xilinx_intc_irqchip, handle_level_irq);
-        set_irq_type(virq, IRQ_TYPE_NONE);
+
+        if (xilinx_intc_typetable[irq] == IRQ_TYPE_LEVEL_HIGH ||
+            xilinx_intc_typetable[irq] == IRQ_TYPE_LEVEL_LOW) {
+                set_irq_chip_and_handler(virq, &xilinx_intc_level_irqchip,
+                        handle_level_irq);
+        } else {
+                set_irq_chip_and_handler(virq, &xilinx_intc_edge_irqchip,
+                        handle_edge_irq);
+        }
         return 0;
 }
 
 static struct irq_host_ops xilinx_intc_ops = {
         .map = xilinx_intc_map,
+        .xlate = xilinx_intc_xlate,
 };
 
 struct irq_host * __init
@@ -116,7 +212,8 @@ xilinx_intc_init(struct device_node *np)
         out_be32(regs + XINTC_MER, 0x3UL); /* Turn on the Master Enable. */
 
         /* Allocate and initialize an irq_host structure. */
-        irq = irq_alloc_host(np, IRQ_HOST_MAP_LINEAR, 32, &xilinx_intc_ops, -1);
+        irq = irq_alloc_host(np, IRQ_HOST_MAP_LINEAR, XILINX_INTC_MAXIRQS,
+                             &xilinx_intc_ops, -1);
         if (!irq)
                 panic(__FILE__ ": Cannot allocate IRQ host\n");
         irq->host_data = regs;