1 files changed, 200 insertions, 0 deletions

diff --git a/arch/powerpc/sysdev/ppc4xx_soc.c b/arch/powerpc/sysdev/ppc4xx_soc.c
new file mode 100644
index 000000000000..5b32adc9a9b2
--- /dev/null
+++ b/arch/powerpc/sysdev/ppc4xx_soc.c
@@ -0,0 +1,200 @@
+/*
+ * IBM/AMCC PPC4xx SoC setup code
+ *
+ * Copyright 2008 DENX Software Engineering, Stefan Roese <sr@denx.de>
+ *
+ * L2 cache routines cloned from arch/ppc/syslib/ibm440gx_common.c which is:
+ *   Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
+ *   Copyright (c) 2003 - 2006 Zultys Technologies
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/of_platform.h>
+
+#include <asm/dcr.h>
+#include <asm/dcr-regs.h>
+#include <asm/reg.h>
+
+static u32 dcrbase_l2c;
+
+/*
+ * L2-cache
+ */
+
+/* Issue L2C diagnostic command */
+static inline u32 l2c_diag(u32 addr)
+{
+        mtdcr(dcrbase_l2c + DCRN_L2C0_ADDR, addr);
+        mtdcr(dcrbase_l2c + DCRN_L2C0_CMD, L2C_CMD_DIAG);
+        while (!(mfdcr(dcrbase_l2c + DCRN_L2C0_SR) & L2C_SR_CC))
+                ;
+
+        return mfdcr(dcrbase_l2c + DCRN_L2C0_DATA);
+}
+
+static irqreturn_t l2c_error_handler(int irq, void *dev)
+{
+        u32 sr = mfdcr(dcrbase_l2c + DCRN_L2C0_SR);
+
+        if (sr & L2C_SR_CPE) {
+                /* Read cache trapped address */
+                u32 addr = l2c_diag(0x42000000);
+                printk(KERN_EMERG "L2C: Cache Parity Error, addr[16:26] = 0x%08x\n",
+                       addr);
+        }
+        if (sr & L2C_SR_TPE) {
+                /* Read tag trapped address */
+                u32 addr = l2c_diag(0x82000000) >> 16;
+                printk(KERN_EMERG "L2C: Tag Parity Error, addr[16:26] = 0x%08x\n",
+                       addr);
+        }
+
+        /* Clear parity errors */
+        if (sr & (L2C_SR_CPE | L2C_SR_TPE)){
+                mtdcr(dcrbase_l2c + DCRN_L2C0_ADDR, 0);
+                mtdcr(dcrbase_l2c + DCRN_L2C0_CMD, L2C_CMD_CCP | L2C_CMD_CTE);
+        } else {
+                printk(KERN_EMERG "L2C: LRU error\n");
+        }
+
+        return IRQ_HANDLED;
+}
+
+static int __init ppc4xx_l2c_probe(void)
+{
+        struct device_node *np;
+        u32 r;
+        unsigned long flags;
+        int irq;
+        const u32 *dcrreg;
+        u32 dcrbase_isram;
+        int len;
+        const u32 *prop;
+        u32 l2_size;
+
+        np = of_find_compatible_node(NULL, NULL, "ibm,l2-cache");
+        if (!np)
+                return 0;
+
+        /* Get l2 cache size */
+        prop = of_get_property(np, "cache-size", NULL);
+        if (prop == NULL) {
+                printk(KERN_ERR "%s: Can't get cache-size!\n", np->full_name);
+                of_node_put(np);
+                return -ENODEV;
+        }
+        l2_size = prop[0];
+
+        /* Map DCRs */
+        dcrreg = of_get_property(np, "dcr-reg", &len);
+        if (!dcrreg || (len != 4 * sizeof(u32))) {
+                printk(KERN_ERR "%s: Can't get DCR register base !",
+                       np->full_name);
+                of_node_put(np);
+                return -ENODEV;
+        }
+        dcrbase_isram = dcrreg[0];
+        dcrbase_l2c = dcrreg[2];
+
+        /* Get and map irq number from device tree */
+        irq = irq_of_parse_and_map(np, 0);
+        if (irq == NO_IRQ) {
+                printk(KERN_ERR "irq_of_parse_and_map failed\n");
+                of_node_put(np);
+                return -ENODEV;
+        }
+
+        /* Install error handler */
+        if (request_irq(irq, l2c_error_handler, IRQF_DISABLED, "L2C", 0) < 0) {
+                printk(KERN_ERR "Cannot install L2C error handler"
+                       ", cache is not enabled\n");
+                of_node_put(np);
+                return -ENODEV;
+        }
+
+        local_irq_save(flags);
+        asm volatile ("sync" ::: "memory");
+
+        /* Disable SRAM */
+        mtdcr(dcrbase_isram + DCRN_SRAM0_DPC,
+              mfdcr(dcrbase_isram + DCRN_SRAM0_DPC) & ~SRAM_DPC_ENABLE);
+        mtdcr(dcrbase_isram + DCRN_SRAM0_SB0CR,
+              mfdcr(dcrbase_isram + DCRN_SRAM0_SB0CR) & ~SRAM_SBCR_BU_MASK);
+        mtdcr(dcrbase_isram + DCRN_SRAM0_SB1CR,
+              mfdcr(dcrbase_isram + DCRN_SRAM0_SB1CR) & ~SRAM_SBCR_BU_MASK);
+        mtdcr(dcrbase_isram + DCRN_SRAM0_SB2CR,
+              mfdcr(dcrbase_isram + DCRN_SRAM0_SB2CR) & ~SRAM_SBCR_BU_MASK);
+        mtdcr(dcrbase_isram + DCRN_SRAM0_SB3CR,
+              mfdcr(dcrbase_isram + DCRN_SRAM0_SB3CR) & ~SRAM_SBCR_BU_MASK);
+
+        /* Enable L2_MODE without ICU/DCU */
+        r = mfdcr(dcrbase_l2c + DCRN_L2C0_CFG) &
+                ~(L2C_CFG_ICU | L2C_CFG_DCU | L2C_CFG_SS_MASK);
+        r |= L2C_CFG_L2M | L2C_CFG_SS_256;
+        mtdcr(dcrbase_l2c + DCRN_L2C0_CFG, r);
+
+        mtdcr(dcrbase_l2c + DCRN_L2C0_ADDR, 0);
+
+        /* Hardware Clear Command */
+        mtdcr(dcrbase_l2c + DCRN_L2C0_CMD, L2C_CMD_HCC);
+        while (!(mfdcr(dcrbase_l2c + DCRN_L2C0_SR) & L2C_SR_CC))
+                ;
+
+        /* Clear Cache Parity and Tag Errors */
+        mtdcr(dcrbase_l2c + DCRN_L2C0_CMD, L2C_CMD_CCP | L2C_CMD_CTE);
+
+        /* Enable 64G snoop region starting at 0 */
+        r = mfdcr(dcrbase_l2c + DCRN_L2C0_SNP0) &
+                ~(L2C_SNP_BA_MASK | L2C_SNP_SSR_MASK);
+        r |= L2C_SNP_SSR_32G | L2C_SNP_ESR;
+        mtdcr(dcrbase_l2c + DCRN_L2C0_SNP0, r);
+
+        r = mfdcr(dcrbase_l2c + DCRN_L2C0_SNP1) &
+                ~(L2C_SNP_BA_MASK | L2C_SNP_SSR_MASK);
+        r |= 0x80000000 | L2C_SNP_SSR_32G | L2C_SNP_ESR;
+        mtdcr(dcrbase_l2c + DCRN_L2C0_SNP1, r);
+
+        asm volatile ("sync" ::: "memory");
+
+        /* Enable ICU/DCU ports */
+        r = mfdcr(dcrbase_l2c + DCRN_L2C0_CFG);
+        r &= ~(L2C_CFG_DCW_MASK | L2C_CFG_PMUX_MASK | L2C_CFG_PMIM
+               | L2C_CFG_TPEI | L2C_CFG_CPEI | L2C_CFG_NAM | L2C_CFG_NBRM);
+        r |= L2C_CFG_ICU | L2C_CFG_DCU | L2C_CFG_TPC | L2C_CFG_CPC | L2C_CFG_FRAN
+                | L2C_CFG_CPIM | L2C_CFG_TPIM | L2C_CFG_LIM | L2C_CFG_SMCM;
+
+        /* Check for 460EX/GT special handling */
+        if (of_device_is_compatible(np, "ibm,l2-cache-460ex"))
+                r |= L2C_CFG_RDBW;
+
+        mtdcr(dcrbase_l2c + DCRN_L2C0_CFG, r);
+
+        asm volatile ("sync; isync" ::: "memory");
+        local_irq_restore(flags);
+
+        printk(KERN_INFO "%dk L2-cache enabled\n", l2_size >> 10);
+
+        of_node_put(np);
+        return 0;
+}
+arch_initcall(ppc4xx_l2c_probe);
+
+/*
+ * At present, this routine just applies a system reset.
+ */
+void ppc4xx_reset_system(char *cmd)
+{
+        mtspr(SPRN_DBCR0, mfspr(SPRN_DBCR0) | DBCR0_RST_SYSTEM);
+        while (1)
+                ;       /* Just in case the reset doesn't work */
+}