1 files changed, 313 insertions, 0 deletions

diff --git a/arch/powerpc/platforms/embedded6xx/Kconfig b/arch/powerpc/platforms/embedded6xx/Kconfig
new file mode 100644
index 000000000000..4f3551430596
--- /dev/null
+++ b/arch/powerpc/platforms/embedded6xx/Kconfig
@@ -0,0 +1,313 @@
+choice
+        prompt "Machine Type"
+        depends on EMBEDDED6xx
+
+config APUS
+        bool "Amiga-APUS"
+        depends on BROKEN
+        help
+          Select APUS if configuring for a PowerUP Amiga.
+          More information is available at:
+          <http://linux-apus.sourceforge.net/>.
+
+config KATANA
+        bool "Artesyn-Katana"
+        help
+          Select KATANA if configuring an Artesyn KATANA 750i or 3750
+          cPCI board.
+
+config WILLOW
+        bool "Cogent-Willow"
+
+config CPCI690
+        bool "Force-CPCI690"
+        help
+          Select CPCI690 if configuring a Force CPCI690 cPCI board.
+
+config POWERPMC250
+        bool "Force-PowerPMC250"
+
+config CHESTNUT
+        bool "IBM 750FX Eval board or 750GX Eval board"
+        help
+          Select CHESTNUT if configuring an IBM 750FX Eval Board or a
+          IBM 750GX Eval board.
+
+config SPRUCE
+        bool "IBM-Spruce"
+
+config HDPU
+        bool "Sky-HDPU"
+        help
+          Select HDPU if configuring a Sky Computers Compute Blade.
+
+config HDPU_FEATURES
+        depends HDPU
+        tristate "HDPU-Features"
+        help
+          Select to enable HDPU enhanced features.
+
+config EV64260
+        bool "Marvell-EV64260BP"
+        help
+          Select EV64260 if configuring a Marvell (formerly Galileo)
+          EV64260BP Evaluation platform.
+
+config LOPEC
+        bool "Motorola-LoPEC"
+
+config MVME5100
+        bool "Motorola-MVME5100"
+
+config PPLUS
+        bool "Motorola-PowerPlus"
+
+config PRPMC750
+        bool "Motorola-PrPMC750"
+
+config PRPMC800
+        bool "Motorola-PrPMC800"
+
+config SANDPOINT
+        bool "Motorola-Sandpoint"
+        help
+          Select SANDPOINT if configuring for a Motorola Sandpoint X3
+          (any flavor).
+
+config RADSTONE_PPC7D
+        bool "Radstone Technology PPC7D board"
+
+config PAL4
+        bool "SBS-Palomar4"
+
+config GEMINI
+        bool "Synergy-Gemini"
+        depends on BROKEN
+        help
+          Select Gemini if configuring for a Synergy Microsystems' Gemini
+          series Single Board Computer.  More information is available at:
+          <http://www.synergymicro.com/PressRel/97_10_15.html>.
+
+config EST8260
+        bool "EST8260"
+        ---help---
+          The EST8260 is a single-board computer manufactured by Wind River
+          Systems, Inc. (formerly Embedded Support Tools Corp.) and based on
+          the MPC8260.  Wind River Systems has a website at
+          <http://www.windriver.com/>, but the EST8260 cannot be found on it
+          and has probably been discontinued or rebadged.
+
+config SBC82xx
+        bool "SBC82xx"
+        ---help---
+          SBC PowerQUICC II, single-board computer with MPC82xx CPU
+          Manufacturer: Wind River Systems, Inc.
+          Date of Release: May 2003
+          End of Life: -
+          URL: <http://www.windriver.com/>
+
+config SBS8260
+        bool "SBS8260"
+
+config RPX8260
+        bool "RPXSUPER"
+
+config TQM8260
+        bool "TQM8260"
+        ---help---
+          MPC8260 based module, little larger than credit card,
+          up to 128 MB global + 64 MB local RAM, 32 MB Flash,
+          32 kB EEPROM, 256 kB L@ Cache, 10baseT + 100baseT Ethernet,
+          2 x serial ports, ...
+          Manufacturer: TQ Components, www.tq-group.de
+          Date of Release: June 2001
+          End of Life: not yet :-)
+          URL: <http://www.denx.de/PDF/TQM82xx_SPEC_Rev005.pdf>
+
+config ADS8272
+        bool "ADS8272"
+
+config PQ2FADS
+        bool "Freescale-PQ2FADS"
+        help
+          Select PQ2FADS if you wish to configure for a Freescale
+          PQ2FADS board (-VR or -ZU).
+
+config LITE5200
+        bool "Freescale LITE5200 / (IceCube)"
+        select PPC_MPC52xx
+        help
+          Support for the LITE5200 dev board for the MPC5200 from Freescale.
+          This is for the LITE5200 version 2.0 board. Don't know if it changes
+          much but it's only been tested on this board version. I think this
+          board is also known as IceCube.
+
+config MPC834x_SYS
+        bool "Freescale MPC834x SYS"
+        help
+          This option enables support for the MPC 834x SYS evaluation board.
+
+          Be aware that PCI buses can only function when SYS board is plugged
+          into the PIB (Platform IO Board) board from Freescale which provide
+          3 PCI slots.  The PIBs PCI initialization is the bootloader's
+          responsiblilty.
+
+config EV64360
+        bool "Marvell-EV64360BP"
+        help
+          Select EV64360 if configuring a Marvell EV64360BP Evaluation
+          platform.
+endchoice
+
+config PQ2ADS
+        bool
+        depends on ADS8272
+        default y
+
+config TQM8xxL
+        bool
+        depends on 8xx && (TQM823L || TQM850L || FPS850L || TQM855L || TQM860L)
+        default y
+
+config PPC_MPC52xx
+        bool
+
+config 8260
+        bool "CPM2 Support" if WILLOW
+        depends on 6xx
+        default y if TQM8260 || RPX8260 || EST8260 || SBS8260 || SBC82xx || PQ2FADS
+        help
+          The MPC8260 is a typical embedded CPU made by Motorola.  Selecting
+          this option means that you wish to build a kernel for a machine with
+          an 8260 class CPU.
+
+config 8272
+        bool
+        depends on 6xx
+        default y if ADS8272
+        select 8260
+        help
+          The MPC8272 CPM has a different internal dpram setup than other CPM2
+          devices
+
+config 83xx
+        bool
+        default y if MPC834x_SYS
+
+config MPC834x
+        bool
+        default y if MPC834x_SYS
+
+config CPM2
+        bool
+        depends on 8260 || MPC8560 || MPC8555
+        default y
+        help
+          The CPM2 (Communications Processor Module) is a coprocessor on
+          embedded CPUs made by Motorola.  Selecting this option means that
+          you wish to build a kernel for a machine with a CPM2 coprocessor
+          on it (826x, 827x, 8560).
+
+config PPC_GEN550
+        bool
+        depends on SANDPOINT || SPRUCE || PPLUS || \
+                PRPMC750 || PRPMC800 || LOPEC || \
+                (EV64260 && !SERIAL_MPSC) || CHESTNUT || RADSTONE_PPC7D || \
+                83xx
+        default y
+
+config FORCE
+        bool
+        depends on 6xx && POWERPMC250
+        default y
+
+config GT64260
+        bool
+        depends on EV64260 || CPCI690
+        default y
+
+config MV64360          # Really MV64360 & MV64460
+        bool
+        depends on CHESTNUT || KATANA || RADSTONE_PPC7D || HDPU || EV64360
+        default y
+
+config MV64X60
+        bool
+        depends on (GT64260 || MV64360)
+        default y
+
+menu "Set bridge options"
+        depends on MV64X60
+
+config NOT_COHERENT_CACHE
+        bool "Turn off Cache Coherency"
+        default n
+        help
+          Some 64x60 bridges lock up when trying to enforce cache coherency.
+          When this option is selected, cache coherency will be turned off.
+          Note that this can cause other problems (e.g., stale data being
+          speculatively loaded via a cached mapping).  Use at your own risk.
+
+config MV64X60_BASE
+        hex "Set bridge base used by firmware"
+        default "0xf1000000"
+        help
+          A firmware can leave the base address of the bridge's registers at
+          a non-standard location.  If so, set this value to reflect the
+          address of that non-standard location.
+
+config MV64X60_NEW_BASE
+        hex "Set bridge base used by kernel"
+        default "0xf1000000"
+        help
+          If the current base address of the bridge's registers is not where
+          you want it, set this value to the address that you want it moved to.
+
+endmenu
+
+config NONMONARCH_SUPPORT
+        bool "Enable Non-Monarch Support"
+        depends on PRPMC800
+
+config HARRIER
+        bool
+        depends on PRPMC800
+        default y
+
+config EPIC_SERIAL_MODE
+        bool
+        depends on 6xx && (LOPEC || SANDPOINT)
+        default y
+
+config MPC10X_BRIDGE
+        bool
+        depends on POWERPMC250 || LOPEC || SANDPOINT
+        default y
+
+config MPC10X_OPENPIC
+        bool
+        depends on POWERPMC250 || LOPEC || SANDPOINT
+        default y
+
+config MPC10X_STORE_GATHERING
+        bool "Enable MPC10x store gathering"
+        depends on MPC10X_BRIDGE
+
+config SANDPOINT_ENABLE_UART1
+        bool "Enable DUART mode on Sandpoint"
+        depends on SANDPOINT
+        help
+          If this option is enabled then the MPC824x processor will run
+          in DUART mode instead of UART mode.
+
+config HARRIER_STORE_GATHERING
+        bool "Enable Harrier store gathering"
+        depends on HARRIER
+
+config MVME5100_IPMC761_PRESENT
+        bool "MVME5100 configured with an IPMC761"
+        depends on MVME5100
+
+config SPRUCE_BAUD_33M
+        bool "Spruce baud clock support"
+        depends on SPRUCE