7 files changed, 318 insertions, 4 deletions

diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
index ccc25eddbcb8..8a5bc1cfc6aa 100644
--- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile
@@ -389,7 +389,12 @@ $(obj)/zImage:		$(addprefix $(obj)/, $(image-y))
 $(obj)/zImage.initrd:   $(addprefix $(obj)/, $(initrd-y))
         @rm -f $@; ln $< $@
 
+# Only install the vmlinux
 install: $(CONFIGURE) $(addprefix $(obj)/, $(image-y))
+        sh -x $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" vmlinux System.map "$(INSTALL_PATH)"
+
+# Install the vmlinux and other built boot targets.
+zInstall: $(CONFIGURE) $(addprefix $(obj)/, $(image-y))
         sh -x $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" vmlinux System.map "$(INSTALL_PATH)" $^
 
 # anything not in $(targets)
diff --git a/arch/powerpc/boot/dts/fsl/t2081si-post.dtsi b/arch/powerpc/boot/dts/fsl/t2081si-post.dtsi
index 97479f0ce630..aecee9690a88 100644
--- a/arch/powerpc/boot/dts/fsl/t2081si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/t2081si-post.dtsi
@@ -410,7 +410,7 @@
 /include/ "qoriq-gpio-3.dtsi"
 /include/ "qoriq-usb2-mph-0.dtsi"
         usb0: usb@210000 {
-                compatible = "fsl-usb2-mph-v2.4", "fsl-usb2-mph";
+                compatible = "fsl-usb2-mph-v2.5", "fsl-usb2-mph";
                 fsl,iommu-parent = <&pamu1>;
                 fsl,liodn-reg = <&guts 0x520>; /* USB1LIODNR */
                 phy_type = "utmi";
@@ -418,7 +418,7 @@
         };
 /include/ "qoriq-usb2-dr-0.dtsi"
         usb1: usb@211000 {
-                compatible = "fsl-usb2-dr-v2.4", "fsl-usb2-dr";
+                compatible = "fsl-usb2-dr-v2.5", "fsl-usb2-dr";
                 fsl,iommu-parent = <&pamu1>;
                 fsl,liodn-reg = <&guts 0x524>; /* USB1LIODNR */
                 dr_mode = "host";
diff --git a/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi b/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi
index a3d582e0361a..7e2fc7cdce48 100644
--- a/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/t4240si-post.dtsi
@@ -498,13 +498,13 @@
 /include/ "qoriq-gpio-3.dtsi"
 /include/ "qoriq-usb2-mph-0.dtsi"
                 usb0: usb@210000 {
-                        compatible = "fsl-usb2-mph-v2.4", "fsl-usb2-mph";
+                        compatible = "fsl-usb2-mph-v2.5", "fsl-usb2-mph";
                         phy_type = "utmi";
                         port0;
                 };
 /include/ "qoriq-usb2-dr-0.dtsi"
                 usb1: usb@211000 {
-                        compatible = "fsl-usb2-dr-v2.4", "fsl-usb2-dr";
+                        compatible = "fsl-usb2-dr-v2.5", "fsl-usb2-dr";
                         dr_mode = "host";
                         phy_type = "utmi";
                 };
diff --git a/arch/powerpc/boot/dts/t1040rdb.dts b/arch/powerpc/boot/dts/t1040rdb.dts
new file mode 100644
index 000000000000..79a0bed04c1a
--- /dev/null
+++ b/arch/powerpc/boot/dts/t1040rdb.dts
@@ -0,0 +1,48 @@
+/*
+ * T1040RDB Device Tree Source
+ *
+ * Copyright 2014 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "fsl/t104xsi-pre.dtsi"
+/include/ "t104xrdb.dtsi"
+
+/ {
+        model = "fsl,T1040RDB";
+        compatible = "fsl,T1040RDB";
+        ifc: localbus@ffe124000 {
+                cpld@3,0 {
+                        compatible = "fsl,t1040rdb-cpld";
+                };
+        };
+};
+
+/include/ "fsl/t1040si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/t1042rdb.dts b/arch/powerpc/boot/dts/t1042rdb.dts
new file mode 100644
index 000000000000..738c23790e94
--- /dev/null
+++ b/arch/powerpc/boot/dts/t1042rdb.dts
@@ -0,0 +1,48 @@
+/*
+ * T1042RDB Device Tree Source
+ *
+ * Copyright 2014 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "fsl/t104xsi-pre.dtsi"
+/include/ "t104xrdb.dtsi"
+
+/ {
+        model = "fsl,T1042RDB";
+        compatible = "fsl,T1042RDB";
+        ifc: localbus@ffe124000 {
+                cpld@3,0 {
+                        compatible = "fsl,t1042rdb-cpld";
+                };
+        };
+};
+
+/include/ "fsl/t1042si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/t1042rdb_pi.dts b/arch/powerpc/boot/dts/t1042rdb_pi.dts
new file mode 100644
index 000000000000..634f751fa6d3
--- /dev/null
+++ b/arch/powerpc/boot/dts/t1042rdb_pi.dts
@@ -0,0 +1,57 @@
+/*
+ * T1042RDB_PI Device Tree Source
+ *
+ * Copyright 2014 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "fsl/t104xsi-pre.dtsi"
+/include/ "t104xrdb.dtsi"
+
+/ {
+        model = "fsl,T1042RDB_PI";
+        compatible = "fsl,T1042RDB_PI";
+        ifc: localbus@ffe124000 {
+                cpld@3,0 {
+                        compatible = "fsl,t1042rdb_pi-cpld";
+                };
+        };
+        soc: soc@ffe000000 {
+                i2c@118000 {
+                        rtc@68 {
+                                compatible = "dallas,ds1337";
+                                reg = <0x68>;
+                                interrupts = <0x2 0x1 0 0>;
+                        };
+                };
+        };
+};
+
+/include/ "fsl/t1042si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/t104xrdb.dtsi b/arch/powerpc/boot/dts/t104xrdb.dtsi
new file mode 100644
index 000000000000..1cf0f3c5f7e5
--- /dev/null
+++ b/arch/powerpc/boot/dts/t104xrdb.dtsi
@@ -0,0 +1,156 @@
+/*
+ * T1040RDB/T1042RDB Device Tree Source
+ *
+ * Copyright 2014 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/ {
+
+        ifc: localbus@ffe124000 {
+                reg = <0xf 0xfe124000 0 0x2000>;
+                ranges = <0 0 0xf 0xe8000000 0x08000000
+                          2 0 0xf 0xff800000 0x00010000
+                          3 0 0xf 0xffdf0000 0x00008000>;
+
+                nor@0,0 {
+                        #address-cells = <1>;
+                        #size-cells = <1>;
+                        compatible = "cfi-flash";
+                        reg = <0x0 0x0 0x8000000>;
+                        bank-width = <2>;
+                        device-width = <1>;
+                };
+
+                nand@2,0 {
+                        #address-cells = <1>;
+                        #size-cells = <1>;
+                        compatible = "fsl,ifc-nand";
+                        reg = <0x2 0x0 0x10000>;
+                };
+
+                cpld@3,0 {
+                        reg = <3 0 0x300>;
+                };
+        };
+
+        memory {
+                device_type = "memory";
+        };
+
+        dcsr: dcsr@f00000000 {
+                ranges = <0x00000000 0xf 0x00000000 0x01072000>;
+        };
+
+        soc: soc@ffe000000 {
+                ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
+                reg = <0xf 0xfe000000 0 0x00001000>;
+
+                spi@110000 {
+                        flash@0 {
+                                #address-cells = <1>;
+                                #size-cells = <1>;
+                                compatible = "micron,n25q512a";
+                                reg = <0>;
+                                spi-max-frequency = <10000000>; /* input clock */
+                        };
+                };
+
+                i2c@118100 {
+                        pca9546@77 {
+                                compatible = "nxp,pca9546";
+                                reg = <0x77>;
+                                #address-cells = <1>;
+                                #size-cells = <0>;
+                        };
+                };
+
+        };
+
+        pci0: pcie@ffe240000 {
+                reg = <0xf 0xfe240000 0 0x10000>;
+                ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x10000000
+                          0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
+                pcie@0 {
+                        ranges = <0x02000000 0 0xe0000000
+                                  0x02000000 0 0xe0000000
+                                  0 0x10000000
+
+                                  0x01000000 0 0x00000000
+                                  0x01000000 0 0x00000000
+                                  0 0x00010000>;
+                };
+        };
+
+        pci1: pcie@ffe250000 {
+                reg = <0xf 0xfe250000 0 0x10000>;
+                ranges = <0x02000000 0x0 0xe0000000 0xc 0x10000000 0x0 0x10000000
+                          0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
+                pcie@0 {
+                        ranges = <0x02000000 0 0xe0000000
+                                  0x02000000 0 0xe0000000
+                                  0 0x10000000
+
+                                  0x01000000 0 0x00000000
+                                  0x01000000 0 0x00000000
+                                  0 0x00010000>;
+                };
+        };
+
+        pci2: pcie@ffe260000 {
+                reg = <0xf 0xfe260000 0 0x10000>;
+                ranges = <0x02000000 0 0xe0000000 0xc 0x20000000 0 0x10000000
+                          0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
+                pcie@0 {
+                        ranges = <0x02000000 0 0xe0000000
+                                  0x02000000 0 0xe0000000
+                                  0 0x10000000
+
+                                  0x01000000 0 0x00000000
+                                  0x01000000 0 0x00000000
+                                  0 0x00010000>;
+                };
+        };
+
+        pci3: pcie@ffe270000 {
+                reg = <0xf 0xfe270000 0 0x10000>;
+                ranges = <0x02000000 0 0xe0000000 0xc 0x30000000 0 0x10000000
+                          0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>;
+                pcie@0 {
+                        ranges = <0x02000000 0 0xe0000000
+                                  0x02000000 0 0xe0000000
+                                  0 0x10000000
+
+                                  0x01000000 0 0x00000000
+                                  0x01000000 0 0x00000000
+                                  0 0x00010000>;
+                };
+        };
+};