diff options
Diffstat (limited to 'arch/powerpc/boot/dts/mpc8568mds.dts')
-rw-r--r-- | arch/powerpc/boot/dts/mpc8568mds.dts | 380 |
1 files changed, 380 insertions, 0 deletions
diff --git a/arch/powerpc/boot/dts/mpc8568mds.dts b/arch/powerpc/boot/dts/mpc8568mds.dts new file mode 100644 index 000000000000..06d24653e422 --- /dev/null +++ b/arch/powerpc/boot/dts/mpc8568mds.dts | |||
@@ -0,0 +1,380 @@ | |||
1 | /* | ||
2 | * MPC8568E MDS Device Tree Source | ||
3 | * | ||
4 | * Copyright 2007 Freescale Semiconductor Inc. | ||
5 | * | ||
6 | * This program is free software; you can redistribute it and/or modify it | ||
7 | * under the terms of the GNU General Public License as published by the | ||
8 | * Free Software Foundation; either version 2 of the License, or (at your | ||
9 | * option) any later version. | ||
10 | */ | ||
11 | |||
12 | |||
13 | /* | ||
14 | /memreserve/ 00000000 1000000; | ||
15 | */ | ||
16 | |||
17 | / { | ||
18 | model = "MPC8568EMDS"; | ||
19 | compatible = "MPC85xxMDS"; | ||
20 | #address-cells = <1>; | ||
21 | #size-cells = <1>; | ||
22 | linux,phandle = <100>; | ||
23 | |||
24 | cpus { | ||
25 | #cpus = <1>; | ||
26 | #address-cells = <1>; | ||
27 | #size-cells = <0>; | ||
28 | linux,phandle = <200>; | ||
29 | |||
30 | PowerPC,8568@0 { | ||
31 | device_type = "cpu"; | ||
32 | reg = <0>; | ||
33 | d-cache-line-size = <20>; // 32 bytes | ||
34 | i-cache-line-size = <20>; // 32 bytes | ||
35 | d-cache-size = <8000>; // L1, 32K | ||
36 | i-cache-size = <8000>; // L1, 32K | ||
37 | timebase-frequency = <0>; | ||
38 | bus-frequency = <0>; | ||
39 | clock-frequency = <0>; | ||
40 | 32-bit; | ||
41 | linux,phandle = <201>; | ||
42 | }; | ||
43 | }; | ||
44 | |||
45 | memory { | ||
46 | device_type = "memory"; | ||
47 | linux,phandle = <300>; | ||
48 | reg = <00000000 10000000>; | ||
49 | }; | ||
50 | |||
51 | bcsr@f8000000 { | ||
52 | device_type = "board-control"; | ||
53 | reg = <f8000000 8000>; | ||
54 | }; | ||
55 | |||
56 | soc8568@e0000000 { | ||
57 | #address-cells = <1>; | ||
58 | #size-cells = <1>; | ||
59 | #interrupt-cells = <2>; | ||
60 | device_type = "soc"; | ||
61 | ranges = <0 e0000000 00100000>; | ||
62 | reg = <e0000000 00100000>; | ||
63 | bus-frequency = <0>; | ||
64 | |||
65 | i2c@3000 { | ||
66 | device_type = "i2c"; | ||
67 | compatible = "fsl-i2c"; | ||
68 | reg = <3000 100>; | ||
69 | interrupts = <1b 2>; | ||
70 | interrupt-parent = <40000>; | ||
71 | dfsrr; | ||
72 | }; | ||
73 | |||
74 | i2c@3100 { | ||
75 | device_type = "i2c"; | ||
76 | compatible = "fsl-i2c"; | ||
77 | reg = <3100 100>; | ||
78 | interrupts = <1b 2>; | ||
79 | interrupt-parent = <40000>; | ||
80 | dfsrr; | ||
81 | }; | ||
82 | |||
83 | mdio@24520 { | ||
84 | #address-cells = <1>; | ||
85 | #size-cells = <0>; | ||
86 | device_type = "mdio"; | ||
87 | compatible = "gianfar"; | ||
88 | reg = <24520 20>; | ||
89 | linux,phandle = <24520>; | ||
90 | ethernet-phy@0 { | ||
91 | linux,phandle = <2452000>; | ||
92 | interrupt-parent = <40000>; | ||
93 | interrupts = <31 1>; | ||
94 | reg = <0>; | ||
95 | device_type = "ethernet-phy"; | ||
96 | }; | ||
97 | ethernet-phy@1 { | ||
98 | linux,phandle = <2452001>; | ||
99 | interrupt-parent = <40000>; | ||
100 | interrupts = <32 1>; | ||
101 | reg = <1>; | ||
102 | device_type = "ethernet-phy"; | ||
103 | }; | ||
104 | |||
105 | ethernet-phy@2 { | ||
106 | linux,phandle = <2452002>; | ||
107 | interrupt-parent = <40000>; | ||
108 | interrupts = <31 1>; | ||
109 | reg = <2>; | ||
110 | device_type = "ethernet-phy"; | ||
111 | }; | ||
112 | ethernet-phy@3 { | ||
113 | linux,phandle = <2452003>; | ||
114 | interrupt-parent = <40000>; | ||
115 | interrupts = <32 1>; | ||
116 | reg = <3>; | ||
117 | device_type = "ethernet-phy"; | ||
118 | }; | ||
119 | }; | ||
120 | |||
121 | ethernet@24000 { | ||
122 | #address-cells = <1>; | ||
123 | #size-cells = <0>; | ||
124 | device_type = "network"; | ||
125 | model = "eTSEC"; | ||
126 | compatible = "gianfar"; | ||
127 | reg = <24000 1000>; | ||
128 | mac-address = [ 00 00 00 00 00 00 ]; | ||
129 | interrupts = <d 2 e 2 12 2>; | ||
130 | interrupt-parent = <40000>; | ||
131 | phy-handle = <2452002>; | ||
132 | }; | ||
133 | |||
134 | ethernet@25000 { | ||
135 | #address-cells = <1>; | ||
136 | #size-cells = <0>; | ||
137 | device_type = "network"; | ||
138 | model = "eTSEC"; | ||
139 | compatible = "gianfar"; | ||
140 | reg = <25000 1000>; | ||
141 | mac-address = [ 00 00 00 00 00 00]; | ||
142 | interrupts = <13 2 14 2 18 2>; | ||
143 | interrupt-parent = <40000>; | ||
144 | phy-handle = <2452003>; | ||
145 | }; | ||
146 | |||
147 | serial@4500 { | ||
148 | device_type = "serial"; | ||
149 | compatible = "ns16550"; | ||
150 | reg = <4500 100>; | ||
151 | clock-frequency = <0>; | ||
152 | interrupts = <1a 2>; | ||
153 | interrupt-parent = <40000>; | ||
154 | }; | ||
155 | |||
156 | serial@4600 { | ||
157 | device_type = "serial"; | ||
158 | compatible = "ns16550"; | ||
159 | reg = <4600 100>; | ||
160 | clock-frequency = <0>; | ||
161 | interrupts = <1a 2>; | ||
162 | interrupt-parent = <40000>; | ||
163 | }; | ||
164 | |||
165 | crypto@30000 { | ||
166 | device_type = "crypto"; | ||
167 | model = "SEC2"; | ||
168 | compatible = "talitos"; | ||
169 | reg = <30000 f000>; | ||
170 | interrupts = <1d 2>; | ||
171 | interrupt-parent = <40000>; | ||
172 | num-channels = <4>; | ||
173 | channel-fifo-len = <18>; | ||
174 | exec-units-mask = <000000fe>; | ||
175 | descriptor-types-mask = <012b0ebf>; | ||
176 | }; | ||
177 | |||
178 | pic@40000 { | ||
179 | linux,phandle = <40000>; | ||
180 | clock-frequency = <0>; | ||
181 | interrupt-controller; | ||
182 | #address-cells = <0>; | ||
183 | #interrupt-cells = <2>; | ||
184 | reg = <40000 40000>; | ||
185 | built-in; | ||
186 | compatible = "chrp,open-pic"; | ||
187 | device_type = "open-pic"; | ||
188 | big-endian; | ||
189 | }; | ||
190 | par_io@e0100 { | ||
191 | reg = <e0100 100>; | ||
192 | device_type = "par_io"; | ||
193 | num-ports = <7>; | ||
194 | |||
195 | ucc_pin@01 { | ||
196 | linux,phandle = <e010001>; | ||
197 | pio-map = < | ||
198 | /* port pin dir open_drain assignment has_irq */ | ||
199 | 4 0a 1 0 2 0 /* TxD0 */ | ||
200 | 4 09 1 0 2 0 /* TxD1 */ | ||
201 | 4 08 1 0 2 0 /* TxD2 */ | ||
202 | 4 07 1 0 2 0 /* TxD3 */ | ||
203 | 4 17 1 0 2 0 /* TxD4 */ | ||
204 | 4 16 1 0 2 0 /* TxD5 */ | ||
205 | 4 15 1 0 2 0 /* TxD6 */ | ||
206 | 4 14 1 0 2 0 /* TxD7 */ | ||
207 | 4 0f 2 0 2 0 /* RxD0 */ | ||
208 | 4 0e 2 0 2 0 /* RxD1 */ | ||
209 | 4 0d 2 0 2 0 /* RxD2 */ | ||
210 | 4 0c 2 0 2 0 /* RxD3 */ | ||
211 | 4 1d 2 0 2 0 /* RxD4 */ | ||
212 | 4 1c 2 0 2 0 /* RxD5 */ | ||
213 | 4 1b 2 0 2 0 /* RxD6 */ | ||
214 | 4 1a 2 0 2 0 /* RxD7 */ | ||
215 | 4 0b 1 0 2 0 /* TX_EN */ | ||
216 | 4 18 1 0 2 0 /* TX_ER */ | ||
217 | 4 0f 2 0 2 0 /* RX_DV */ | ||
218 | 4 1e 2 0 2 0 /* RX_ER */ | ||
219 | 4 11 2 0 2 0 /* RX_CLK */ | ||
220 | 4 13 1 0 2 0 /* GTX_CLK */ | ||
221 | 1 1f 2 0 3 0>; /* GTX125 */ | ||
222 | }; | ||
223 | ucc_pin@02 { | ||
224 | linux,phandle = <e010002>; | ||
225 | pio-map = < | ||
226 | /* port pin dir open_drain assignment has_irq */ | ||
227 | 5 0a 1 0 2 0 /* TxD0 */ | ||
228 | 5 09 1 0 2 0 /* TxD1 */ | ||
229 | 5 08 1 0 2 0 /* TxD2 */ | ||
230 | 5 07 1 0 2 0 /* TxD3 */ | ||
231 | 5 17 1 0 2 0 /* TxD4 */ | ||
232 | 5 16 1 0 2 0 /* TxD5 */ | ||
233 | 5 15 1 0 2 0 /* TxD6 */ | ||
234 | 5 14 1 0 2 0 /* TxD7 */ | ||
235 | 5 0f 2 0 2 0 /* RxD0 */ | ||
236 | 5 0e 2 0 2 0 /* RxD1 */ | ||
237 | 5 0d 2 0 2 0 /* RxD2 */ | ||
238 | 5 0c 2 0 2 0 /* RxD3 */ | ||
239 | 5 1d 2 0 2 0 /* RxD4 */ | ||
240 | 5 1c 2 0 2 0 /* RxD5 */ | ||
241 | 5 1b 2 0 2 0 /* RxD6 */ | ||
242 | 5 1a 2 0 2 0 /* RxD7 */ | ||
243 | 5 0b 1 0 2 0 /* TX_EN */ | ||
244 | 5 18 1 0 2 0 /* TX_ER */ | ||
245 | 5 10 2 0 2 0 /* RX_DV */ | ||
246 | 5 1e 2 0 2 0 /* RX_ER */ | ||
247 | 5 11 2 0 2 0 /* RX_CLK */ | ||
248 | 5 13 1 0 2 0 /* GTX_CLK */ | ||
249 | 1 1f 2 0 3 0 /* GTX125 */ | ||
250 | 4 06 3 0 2 0 /* MDIO */ | ||
251 | 4 05 1 0 2 0>; /* MDC */ | ||
252 | }; | ||
253 | }; | ||
254 | }; | ||
255 | |||
256 | qe@e0080000 { | ||
257 | #address-cells = <1>; | ||
258 | #size-cells = <1>; | ||
259 | device_type = "qe"; | ||
260 | model = "QE"; | ||
261 | ranges = <0 e0080000 00040000>; | ||
262 | reg = <e0080000 480>; | ||
263 | brg-frequency = <0>; | ||
264 | bus-frequency = <179A7B00>; | ||
265 | |||
266 | muram@10000 { | ||
267 | device_type = "muram"; | ||
268 | ranges = <0 00010000 0000c000>; | ||
269 | |||
270 | data-only@0{ | ||
271 | reg = <0 c000>; | ||
272 | }; | ||
273 | }; | ||
274 | |||
275 | spi@4c0 { | ||
276 | device_type = "spi"; | ||
277 | compatible = "fsl_spi"; | ||
278 | reg = <4c0 40>; | ||
279 | interrupts = <2>; | ||
280 | interrupt-parent = <80>; | ||
281 | mode = "cpu"; | ||
282 | }; | ||
283 | |||
284 | spi@500 { | ||
285 | device_type = "spi"; | ||
286 | compatible = "fsl_spi"; | ||
287 | reg = <500 40>; | ||
288 | interrupts = <1>; | ||
289 | interrupt-parent = <80>; | ||
290 | mode = "cpu"; | ||
291 | }; | ||
292 | |||
293 | ucc@2000 { | ||
294 | device_type = "network"; | ||
295 | compatible = "ucc_geth"; | ||
296 | model = "UCC"; | ||
297 | device-id = <1>; | ||
298 | reg = <2000 200>; | ||
299 | interrupts = <20>; | ||
300 | interrupt-parent = <80>; | ||
301 | mac-address = [ 00 04 9f 00 23 23 ]; | ||
302 | rx-clock = <0>; | ||
303 | tx-clock = <19>; | ||
304 | phy-handle = <212000>; | ||
305 | pio-handle = <e010001>; | ||
306 | }; | ||
307 | |||
308 | ucc@3000 { | ||
309 | device_type = "network"; | ||
310 | compatible = "ucc_geth"; | ||
311 | model = "UCC"; | ||
312 | device-id = <2>; | ||
313 | reg = <3000 200>; | ||
314 | interrupts = <21>; | ||
315 | interrupt-parent = <80>; | ||
316 | mac-address = [ 00 11 22 33 44 55 ]; | ||
317 | rx-clock = <0>; | ||
318 | tx-clock = <14>; | ||
319 | phy-handle = <212001>; | ||
320 | pio-handle = <e010002>; | ||
321 | }; | ||
322 | |||
323 | mdio@2120 { | ||
324 | #address-cells = <1>; | ||
325 | #size-cells = <0>; | ||
326 | reg = <2120 18>; | ||
327 | device_type = "mdio"; | ||
328 | compatible = "ucc_geth_phy"; | ||
329 | |||
330 | /* These are the same PHYs as on | ||
331 | * gianfar's MDIO bus */ | ||
332 | ethernet-phy@00 { | ||
333 | linux,phandle = <212000>; | ||
334 | interrupt-parent = <40000>; | ||
335 | interrupts = <31 1>; | ||
336 | reg = <0>; | ||
337 | device_type = "ethernet-phy"; | ||
338 | interface = <6>; //ENET_1000_GMII | ||
339 | }; | ||
340 | ethernet-phy@01 { | ||
341 | linux,phandle = <212001>; | ||
342 | interrupt-parent = <40000>; | ||
343 | interrupts = <32 1>; | ||
344 | reg = <1>; | ||
345 | device_type = "ethernet-phy"; | ||
346 | interface = <6>; | ||
347 | }; | ||
348 | ethernet-phy@02 { | ||
349 | linux,phandle = <212002>; | ||
350 | interrupt-parent = <40000>; | ||
351 | interrupts = <31 1>; | ||
352 | reg = <2>; | ||
353 | device_type = "ethernet-phy"; | ||
354 | interface = <6>; //ENET_1000_GMII | ||
355 | }; | ||
356 | ethernet-phy@03 { | ||
357 | linux,phandle = <212003>; | ||
358 | interrupt-parent = <40000>; | ||
359 | interrupts = <32 1>; | ||
360 | reg = <3>; | ||
361 | device_type = "ethernet-phy"; | ||
362 | interface = <6>; //ENET_1000_GMII | ||
363 | }; | ||
364 | }; | ||
365 | |||
366 | qeic@80 { | ||
367 | linux,phandle = <80>; | ||
368 | interrupt-controller; | ||
369 | device_type = "qeic"; | ||
370 | #address-cells = <0>; | ||
371 | #interrupt-cells = <1>; | ||
372 | reg = <80 80>; | ||
373 | built-in; | ||
374 | big-endian; | ||
375 | interrupts = <1e 2 1e 2>; //high:30 low:30 | ||
376 | interrupt-parent = <40000>; | ||
377 | }; | ||
378 | |||
379 | }; | ||
380 | }; | ||