diff options
Diffstat (limited to 'arch/powerpc/boot/dts/mpc8360emds.dts')
-rw-r--r-- | arch/powerpc/boot/dts/mpc8360emds.dts | 375 |
1 files changed, 375 insertions, 0 deletions
diff --git a/arch/powerpc/boot/dts/mpc8360emds.dts b/arch/powerpc/boot/dts/mpc8360emds.dts new file mode 100644 index 000000000000..9022192155b9 --- /dev/null +++ b/arch/powerpc/boot/dts/mpc8360emds.dts | |||
@@ -0,0 +1,375 @@ | |||
1 | /* | ||
2 | * MPC8360E EMDS Device Tree Source | ||
3 | * | ||
4 | * Copyright 2006 Freescale Semiconductor Inc. | ||
5 | * | ||
6 | * This program is free software; you can redistribute it and/or modify it | ||
7 | * under the terms of the GNU General Public License as published by the | ||
8 | * Free Software Foundation; either version 2 of the License, or (at your | ||
9 | * option) any later version. | ||
10 | */ | ||
11 | |||
12 | |||
13 | /* | ||
14 | /memreserve/ 00000000 1000000; | ||
15 | */ | ||
16 | |||
17 | / { | ||
18 | model = "MPC8360EPB"; | ||
19 | compatible = "MPC83xx"; | ||
20 | #address-cells = <1>; | ||
21 | #size-cells = <1>; | ||
22 | linux,phandle = <100>; | ||
23 | |||
24 | cpus { | ||
25 | #cpus = <1>; | ||
26 | #address-cells = <1>; | ||
27 | #size-cells = <0>; | ||
28 | linux,phandle = <200>; | ||
29 | |||
30 | PowerPC,8360@0 { | ||
31 | device_type = "cpu"; | ||
32 | reg = <0>; | ||
33 | d-cache-line-size = <20>; // 32 bytes | ||
34 | i-cache-line-size = <20>; // 32 bytes | ||
35 | d-cache-size = <8000>; // L1, 32K | ||
36 | i-cache-size = <8000>; // L1, 32K | ||
37 | timebase-frequency = <3EF1480>; | ||
38 | bus-frequency = <FBC5200>; | ||
39 | clock-frequency = <1F78A400>; | ||
40 | 32-bit; | ||
41 | linux,phandle = <201>; | ||
42 | linux,boot-cpu; | ||
43 | }; | ||
44 | }; | ||
45 | |||
46 | memory { | ||
47 | device_type = "memory"; | ||
48 | linux,phandle = <300>; | ||
49 | reg = <00000000 10000000>; | ||
50 | }; | ||
51 | |||
52 | bcsr@f8000000 { | ||
53 | device_type = "board-control"; | ||
54 | reg = <f8000000 8000>; | ||
55 | }; | ||
56 | |||
57 | soc8360@e0000000 { | ||
58 | #address-cells = <1>; | ||
59 | #size-cells = <1>; | ||
60 | #interrupt-cells = <2>; | ||
61 | device_type = "soc"; | ||
62 | ranges = <0 e0000000 00100000>; | ||
63 | reg = <e0000000 00000200>; | ||
64 | bus-frequency = <FBC5200>; | ||
65 | |||
66 | wdt@200 { | ||
67 | device_type = "watchdog"; | ||
68 | compatible = "mpc83xx_wdt"; | ||
69 | reg = <200 100>; | ||
70 | }; | ||
71 | |||
72 | i2c@3000 { | ||
73 | device_type = "i2c"; | ||
74 | compatible = "fsl-i2c"; | ||
75 | reg = <3000 100>; | ||
76 | interrupts = <e 8>; | ||
77 | interrupt-parent = <700>; | ||
78 | dfsrr; | ||
79 | }; | ||
80 | |||
81 | i2c@3100 { | ||
82 | device_type = "i2c"; | ||
83 | compatible = "fsl-i2c"; | ||
84 | reg = <3100 100>; | ||
85 | interrupts = <f 8>; | ||
86 | interrupt-parent = <700>; | ||
87 | dfsrr; | ||
88 | }; | ||
89 | |||
90 | serial@4500 { | ||
91 | device_type = "serial"; | ||
92 | compatible = "ns16550"; | ||
93 | reg = <4500 100>; | ||
94 | clock-frequency = <FBC5200>; | ||
95 | interrupts = <9 8>; | ||
96 | interrupt-parent = <700>; | ||
97 | }; | ||
98 | |||
99 | serial@4600 { | ||
100 | device_type = "serial"; | ||
101 | compatible = "ns16550"; | ||
102 | reg = <4600 100>; | ||
103 | clock-frequency = <FBC5200>; | ||
104 | interrupts = <a 8>; | ||
105 | interrupt-parent = <700>; | ||
106 | }; | ||
107 | |||
108 | crypto@30000 { | ||
109 | device_type = "crypto"; | ||
110 | model = "SEC2"; | ||
111 | compatible = "talitos"; | ||
112 | reg = <30000 10000>; | ||
113 | interrupts = <b 8>; | ||
114 | interrupt-parent = <700>; | ||
115 | num-channels = <4>; | ||
116 | channel-fifo-len = <18>; | ||
117 | exec-units-mask = <0000007e>; | ||
118 | /* desc mask is for rev1.x, we need runtime fixup for >=2.x */ | ||
119 | descriptor-types-mask = <01010ebf>; | ||
120 | }; | ||
121 | |||
122 | pci@8500 { | ||
123 | linux,phandle = <8500>; | ||
124 | interrupt-map-mask = <f800 0 0 7>; | ||
125 | interrupt-map = < | ||
126 | |||
127 | /* IDSEL 0x11 AD17 */ | ||
128 | 8800 0 0 1 700 14 8 | ||
129 | 8800 0 0 2 700 15 8 | ||
130 | 8800 0 0 3 700 16 8 | ||
131 | 8800 0 0 4 700 17 8 | ||
132 | |||
133 | /* IDSEL 0x12 AD18 */ | ||
134 | 9000 0 0 1 700 16 8 | ||
135 | 9000 0 0 2 700 17 8 | ||
136 | 9000 0 0 3 700 14 8 | ||
137 | 9000 0 0 4 700 15 8 | ||
138 | |||
139 | /* IDSEL 0x13 AD19 */ | ||
140 | 9800 0 0 1 700 17 8 | ||
141 | 9800 0 0 2 700 14 8 | ||
142 | 9800 0 0 3 700 15 8 | ||
143 | 9800 0 0 4 700 16 8 | ||
144 | |||
145 | /* IDSEL 0x15 AD21*/ | ||
146 | a800 0 0 1 700 14 8 | ||
147 | a800 0 0 2 700 15 8 | ||
148 | a800 0 0 3 700 16 8 | ||
149 | a800 0 0 4 700 17 8 | ||
150 | |||
151 | /* IDSEL 0x16 AD22*/ | ||
152 | b000 0 0 1 700 17 8 | ||
153 | b000 0 0 2 700 14 8 | ||
154 | b000 0 0 3 700 15 8 | ||
155 | b000 0 0 4 700 16 8 | ||
156 | |||
157 | /* IDSEL 0x17 AD23*/ | ||
158 | b800 0 0 1 700 16 8 | ||
159 | b800 0 0 2 700 17 8 | ||
160 | b800 0 0 3 700 14 8 | ||
161 | b800 0 0 4 700 15 8 | ||
162 | |||
163 | /* IDSEL 0x18 AD24*/ | ||
164 | c000 0 0 1 700 15 8 | ||
165 | c000 0 0 2 700 16 8 | ||
166 | c000 0 0 3 700 17 8 | ||
167 | c000 0 0 4 700 14 8>; | ||
168 | interrupt-parent = <700>; | ||
169 | interrupts = <42 8>; | ||
170 | bus-range = <0 0>; | ||
171 | ranges = <02000000 0 a0000000 a0000000 0 10000000 | ||
172 | 42000000 0 80000000 80000000 0 10000000 | ||
173 | 01000000 0 00000000 e2000000 0 00100000>; | ||
174 | clock-frequency = <3f940aa>; | ||
175 | #interrupt-cells = <1>; | ||
176 | #size-cells = <2>; | ||
177 | #address-cells = <3>; | ||
178 | reg = <8500 100>; | ||
179 | compatible = "83xx"; | ||
180 | device_type = "pci"; | ||
181 | }; | ||
182 | |||
183 | pic@700 { | ||
184 | linux,phandle = <700>; | ||
185 | interrupt-controller; | ||
186 | #address-cells = <0>; | ||
187 | #interrupt-cells = <2>; | ||
188 | reg = <700 100>; | ||
189 | built-in; | ||
190 | device_type = "ipic"; | ||
191 | }; | ||
192 | |||
193 | par_io@1400 { | ||
194 | reg = <1400 100>; | ||
195 | device_type = "par_io"; | ||
196 | num-ports = <7>; | ||
197 | |||
198 | ucc_pin@01 { | ||
199 | linux,phandle = <140001>; | ||
200 | pio-map = < | ||
201 | /* port pin dir open_drain assignment has_irq */ | ||
202 | 0 3 1 0 1 0 /* TxD0 */ | ||
203 | 0 4 1 0 1 0 /* TxD1 */ | ||
204 | 0 5 1 0 1 0 /* TxD2 */ | ||
205 | 0 6 1 0 1 0 /* TxD3 */ | ||
206 | 1 6 1 0 3 0 /* TxD4 */ | ||
207 | 1 7 1 0 1 0 /* TxD5 */ | ||
208 | 1 9 1 0 2 0 /* TxD6 */ | ||
209 | 1 a 1 0 2 0 /* TxD7 */ | ||
210 | 0 9 2 0 1 0 /* RxD0 */ | ||
211 | 0 a 2 0 1 0 /* RxD1 */ | ||
212 | 0 b 2 0 1 0 /* RxD2 */ | ||
213 | 0 c 2 0 1 0 /* RxD3 */ | ||
214 | 0 d 2 0 1 0 /* RxD4 */ | ||
215 | 1 1 2 0 2 0 /* RxD5 */ | ||
216 | 1 0 2 0 2 0 /* RxD6 */ | ||
217 | 1 4 2 0 2 0 /* RxD7 */ | ||
218 | 0 7 1 0 1 0 /* TX_EN */ | ||
219 | 0 8 1 0 1 0 /* TX_ER */ | ||
220 | 0 f 2 0 1 0 /* RX_DV */ | ||
221 | 0 10 2 0 1 0 /* RX_ER */ | ||
222 | 0 0 2 0 1 0 /* RX_CLK */ | ||
223 | 2 9 1 0 3 0 /* GTX_CLK - CLK10 */ | ||
224 | 2 8 2 0 1 0>; /* GTX125 - CLK9 */ | ||
225 | }; | ||
226 | ucc_pin@02 { | ||
227 | linux,phandle = <140002>; | ||
228 | pio-map = < | ||
229 | /* port pin dir open_drain assignment has_irq */ | ||
230 | 0 11 1 0 1 0 /* TxD0 */ | ||
231 | 0 12 1 0 1 0 /* TxD1 */ | ||
232 | 0 13 1 0 1 0 /* TxD2 */ | ||
233 | 0 14 1 0 1 0 /* TxD3 */ | ||
234 | 1 2 1 0 1 0 /* TxD4 */ | ||
235 | 1 3 1 0 2 0 /* TxD5 */ | ||
236 | 1 5 1 0 3 0 /* TxD6 */ | ||
237 | 1 8 1 0 3 0 /* TxD7 */ | ||
238 | 0 17 2 0 1 0 /* RxD0 */ | ||
239 | 0 18 2 0 1 0 /* RxD1 */ | ||
240 | 0 19 2 0 1 0 /* RxD2 */ | ||
241 | 0 1a 2 0 1 0 /* RxD3 */ | ||
242 | 0 1b 2 0 1 0 /* RxD4 */ | ||
243 | 1 c 2 0 2 0 /* RxD5 */ | ||
244 | 1 d 2 0 3 0 /* RxD6 */ | ||
245 | 1 b 2 0 2 0 /* RxD7 */ | ||
246 | 0 15 1 0 1 0 /* TX_EN */ | ||
247 | 0 16 1 0 1 0 /* TX_ER */ | ||
248 | 0 1d 2 0 1 0 /* RX_DV */ | ||
249 | 0 1e 2 0 1 0 /* RX_ER */ | ||
250 | 0 1f 2 0 1 0 /* RX_CLK */ | ||
251 | 2 2 1 0 2 0 /* GTX_CLK - CLK10 */ | ||
252 | 2 3 2 0 1 0 /* GTX125 - CLK4 */ | ||
253 | 0 1 3 0 2 0 /* MDIO */ | ||
254 | 0 2 1 0 1 0>; /* MDC */ | ||
255 | }; | ||
256 | |||
257 | }; | ||
258 | }; | ||
259 | |||
260 | qe@e0100000 { | ||
261 | #address-cells = <1>; | ||
262 | #size-cells = <1>; | ||
263 | device_type = "qe"; | ||
264 | model = "QE"; | ||
265 | ranges = <0 e0100000 00100000>; | ||
266 | reg = <e0100000 480>; | ||
267 | brg-frequency = <0>; | ||
268 | bus-frequency = <179A7B00>; | ||
269 | |||
270 | muram@10000 { | ||
271 | device_type = "muram"; | ||
272 | ranges = <0 00010000 0000c000>; | ||
273 | |||
274 | data-only@0{ | ||
275 | reg = <0 c000>; | ||
276 | }; | ||
277 | }; | ||
278 | |||
279 | spi@4c0 { | ||
280 | device_type = "spi"; | ||
281 | compatible = "fsl_spi"; | ||
282 | reg = <4c0 40>; | ||
283 | interrupts = <2>; | ||
284 | interrupt-parent = <80>; | ||
285 | mode = "cpu"; | ||
286 | }; | ||
287 | |||
288 | spi@500 { | ||
289 | device_type = "spi"; | ||
290 | compatible = "fsl_spi"; | ||
291 | reg = <500 40>; | ||
292 | interrupts = <1>; | ||
293 | interrupt-parent = <80>; | ||
294 | mode = "cpu"; | ||
295 | }; | ||
296 | |||
297 | usb@6c0 { | ||
298 | device_type = "usb"; | ||
299 | compatible = "qe_udc"; | ||
300 | reg = <6c0 40 8B00 100>; | ||
301 | interrupts = <b>; | ||
302 | interrupt-parent = <80>; | ||
303 | mode = "slave"; | ||
304 | }; | ||
305 | |||
306 | ucc@2000 { | ||
307 | device_type = "network"; | ||
308 | compatible = "ucc_geth"; | ||
309 | model = "UCC"; | ||
310 | device-id = <1>; | ||
311 | reg = <2000 200>; | ||
312 | interrupts = <20>; | ||
313 | interrupt-parent = <80>; | ||
314 | mac-address = [ 00 04 9f 00 23 23 ]; | ||
315 | rx-clock = <0>; | ||
316 | tx-clock = <19>; | ||
317 | phy-handle = <212000>; | ||
318 | pio-handle = <140001>; | ||
319 | }; | ||
320 | |||
321 | ucc@3000 { | ||
322 | device_type = "network"; | ||
323 | compatible = "ucc_geth"; | ||
324 | model = "UCC"; | ||
325 | device-id = <2>; | ||
326 | reg = <3000 200>; | ||
327 | interrupts = <21>; | ||
328 | interrupt-parent = <80>; | ||
329 | mac-address = [ 00 11 22 33 44 55 ]; | ||
330 | rx-clock = <0>; | ||
331 | tx-clock = <14>; | ||
332 | phy-handle = <212001>; | ||
333 | pio-handle = <140002>; | ||
334 | }; | ||
335 | |||
336 | mdio@2120 { | ||
337 | #address-cells = <1>; | ||
338 | #size-cells = <0>; | ||
339 | reg = <2120 18>; | ||
340 | device_type = "mdio"; | ||
341 | compatible = "ucc_geth_phy"; | ||
342 | |||
343 | ethernet-phy@00 { | ||
344 | linux,phandle = <212000>; | ||
345 | interrupt-parent = <700>; | ||
346 | interrupts = <11 2>; | ||
347 | reg = <0>; | ||
348 | device_type = "ethernet-phy"; | ||
349 | interface = <6>; //ENET_1000_GMII | ||
350 | }; | ||
351 | ethernet-phy@01 { | ||
352 | linux,phandle = <212001>; | ||
353 | interrupt-parent = <700>; | ||
354 | interrupts = <12 2>; | ||
355 | reg = <1>; | ||
356 | device_type = "ethernet-phy"; | ||
357 | interface = <6>; | ||
358 | }; | ||
359 | }; | ||
360 | |||
361 | qeic@80 { | ||
362 | linux,phandle = <80>; | ||
363 | interrupt-controller; | ||
364 | device_type = "qeic"; | ||
365 | #address-cells = <0>; | ||
366 | #interrupt-cells = <1>; | ||
367 | reg = <80 80>; | ||
368 | built-in; | ||
369 | big-endian; | ||
370 | interrupts = <20 8 21 8>; //high:32 low:33 | ||
371 | interrupt-parent = <700>; | ||
372 | }; | ||
373 | |||
374 | }; | ||
375 | }; | ||