diff options
Diffstat (limited to 'arch/powerpc/boot/dts/mpc8315erdb.dts')
-rw-r--r-- | arch/powerpc/boot/dts/mpc8315erdb.dts | 287 |
1 files changed, 287 insertions, 0 deletions
diff --git a/arch/powerpc/boot/dts/mpc8315erdb.dts b/arch/powerpc/boot/dts/mpc8315erdb.dts new file mode 100644 index 000000000000..e157f2342ea0 --- /dev/null +++ b/arch/powerpc/boot/dts/mpc8315erdb.dts | |||
@@ -0,0 +1,287 @@ | |||
1 | /* | ||
2 | * MPC8315E RDB Device Tree Source | ||
3 | * | ||
4 | * Copyright 2007 Freescale Semiconductor Inc. | ||
5 | * | ||
6 | * This program is free software; you can redistribute it and/or modify it | ||
7 | * under the terms of the GNU General Public License as published by the | ||
8 | * Free Software Foundation; either version 2 of the License, or (at your | ||
9 | * option) any later version. | ||
10 | */ | ||
11 | |||
12 | /dts-v1/; | ||
13 | |||
14 | / { | ||
15 | compatible = "fsl,mpc8315erdb"; | ||
16 | #address-cells = <1>; | ||
17 | #size-cells = <1>; | ||
18 | |||
19 | aliases { | ||
20 | ethernet0 = &enet0; | ||
21 | ethernet1 = &enet1; | ||
22 | serial0 = &serial0; | ||
23 | serial1 = &serial1; | ||
24 | pci0 = &pci0; | ||
25 | }; | ||
26 | |||
27 | cpus { | ||
28 | #address-cells = <1>; | ||
29 | #size-cells = <0>; | ||
30 | |||
31 | PowerPC,8315@0 { | ||
32 | device_type = "cpu"; | ||
33 | reg = <0>; | ||
34 | d-cache-line-size = <32>; | ||
35 | i-cache-line-size = <32>; | ||
36 | d-cache-size = <16384>; | ||
37 | i-cache-size = <16384>; | ||
38 | timebase-frequency = <0>; // from bootloader | ||
39 | bus-frequency = <0>; // from bootloader | ||
40 | clock-frequency = <0>; // from bootloader | ||
41 | }; | ||
42 | }; | ||
43 | |||
44 | memory { | ||
45 | device_type = "memory"; | ||
46 | reg = <0x00000000 0x08000000>; // 128MB at 0 | ||
47 | }; | ||
48 | |||
49 | localbus@e0005000 { | ||
50 | #address-cells = <2>; | ||
51 | #size-cells = <1>; | ||
52 | compatible = "fsl,mpc8315-elbc", "fsl,elbc", "simple-bus"; | ||
53 | reg = <0xe0005000 0x1000>; | ||
54 | interrupts = <77 8>; | ||
55 | interrupt-parent = <&ipic>; | ||
56 | |||
57 | // CS0 and CS1 are swapped when | ||
58 | // booting from nand, but the | ||
59 | // addresses are the same. | ||
60 | ranges = <0 0 0xfe000000 0x00800000 | ||
61 | 1 0 0xe0600000 0x00002000 | ||
62 | 2 0 0xf0000000 0x00020000 | ||
63 | 3 0 0xfa000000 0x00008000>; | ||
64 | |||
65 | flash@0,0 { | ||
66 | #address-cells = <1>; | ||
67 | #size-cells = <1>; | ||
68 | compatible = "cfi-flash"; | ||
69 | reg = <0 0 0x800000>; | ||
70 | bank-width = <2>; | ||
71 | device-width = <1>; | ||
72 | }; | ||
73 | |||
74 | nand@1,0 { | ||
75 | #address-cells = <1>; | ||
76 | #size-cells = <1>; | ||
77 | compatible = "fsl,mpc8315-fcm-nand", | ||
78 | "fsl,elbc-fcm-nand"; | ||
79 | reg = <1 0 0x2000>; | ||
80 | |||
81 | u-boot@0 { | ||
82 | reg = <0x0 0x100000>; | ||
83 | read-only; | ||
84 | }; | ||
85 | |||
86 | kernel@100000 { | ||
87 | reg = <0x100000 0x300000>; | ||
88 | }; | ||
89 | fs@400000 { | ||
90 | reg = <0x400000 0x1c00000>; | ||
91 | }; | ||
92 | }; | ||
93 | }; | ||
94 | |||
95 | immr@e0000000 { | ||
96 | #address-cells = <1>; | ||
97 | #size-cells = <1>; | ||
98 | device_type = "soc"; | ||
99 | compatible = "simple-bus"; | ||
100 | ranges = <0 0xe0000000 0x00100000>; | ||
101 | reg = <0xe0000000 0x00000200>; | ||
102 | bus-frequency = <0>; | ||
103 | |||
104 | wdt@200 { | ||
105 | device_type = "watchdog"; | ||
106 | compatible = "mpc83xx_wdt"; | ||
107 | reg = <0x200 0x100>; | ||
108 | }; | ||
109 | |||
110 | i2c@3000 { | ||
111 | #address-cells = <1>; | ||
112 | #size-cells = <0>; | ||
113 | cell-index = <0>; | ||
114 | compatible = "fsl-i2c"; | ||
115 | reg = <0x3000 0x100>; | ||
116 | interrupts = <14 8>; | ||
117 | interrupt-parent = < &ipic >; | ||
118 | dfsrr; | ||
119 | rtc@68 { | ||
120 | device_type = "rtc"; | ||
121 | compatible = "dallas,ds1339"; | ||
122 | reg = <0x68>; | ||
123 | }; | ||
124 | }; | ||
125 | |||
126 | spi@7000 { | ||
127 | cell-index = <0>; | ||
128 | compatible = "fsl,spi"; | ||
129 | reg = <0x7000 0x1000>; | ||
130 | interrupts = <16 8>; | ||
131 | interrupt-parent = < &ipic >; | ||
132 | mode = "cpu"; | ||
133 | }; | ||
134 | |||
135 | usb@23000 { | ||
136 | compatible = "fsl-usb2-dr"; | ||
137 | reg = <0x23000 0x1000>; | ||
138 | #address-cells = <1>; | ||
139 | #size-cells = <0>; | ||
140 | interrupt-parent = < &ipic >; | ||
141 | interrupts = <38 8>; | ||
142 | phy_type = "utmi"; | ||
143 | }; | ||
144 | |||
145 | mdio@24520 { | ||
146 | #address-cells = <1>; | ||
147 | #size-cells = <0>; | ||
148 | compatible = "fsl,gianfar-mdio"; | ||
149 | reg = <0x24520 0x20>; | ||
150 | phy0: ethernet-phy@0 { | ||
151 | interrupt-parent = < &ipic >; | ||
152 | interrupts = <20 8>; | ||
153 | reg = <0>; | ||
154 | device_type = "ethernet-phy"; | ||
155 | }; | ||
156 | phy1: ethernet-phy@1 { | ||
157 | interrupt-parent = < &ipic >; | ||
158 | interrupts = <19 8>; | ||
159 | reg = <1>; | ||
160 | device_type = "ethernet-phy"; | ||
161 | }; | ||
162 | }; | ||
163 | |||
164 | enet0: ethernet@24000 { | ||
165 | cell-index = <0>; | ||
166 | device_type = "network"; | ||
167 | model = "eTSEC"; | ||
168 | compatible = "gianfar"; | ||
169 | reg = <0x24000 0x1000>; | ||
170 | local-mac-address = [ 00 00 00 00 00 00 ]; | ||
171 | interrupts = <32 8 33 8 34 8>; | ||
172 | interrupt-parent = < &ipic >; | ||
173 | phy-handle = < &phy0 >; | ||
174 | }; | ||
175 | |||
176 | enet1: ethernet@25000 { | ||
177 | cell-index = <1>; | ||
178 | device_type = "network"; | ||
179 | model = "eTSEC"; | ||
180 | compatible = "gianfar"; | ||
181 | reg = <0x25000 0x1000>; | ||
182 | local-mac-address = [ 00 00 00 00 00 00 ]; | ||
183 | interrupts = <35 8 36 8 37 8>; | ||
184 | interrupt-parent = < &ipic >; | ||
185 | phy-handle = < &phy1 >; | ||
186 | }; | ||
187 | |||
188 | serial0: serial@4500 { | ||
189 | cell-index = <0>; | ||
190 | device_type = "serial"; | ||
191 | compatible = "ns16550"; | ||
192 | reg = <0x4500 0x100>; | ||
193 | clock-frequency = <0>; | ||
194 | interrupts = <9 8>; | ||
195 | interrupt-parent = < &ipic >; | ||
196 | }; | ||
197 | |||
198 | serial1: serial@4600 { | ||
199 | cell-index = <1>; | ||
200 | device_type = "serial"; | ||
201 | compatible = "ns16550"; | ||
202 | reg = <0x4600 0x100>; | ||
203 | clock-frequency = <0>; | ||
204 | interrupts = <10 8>; | ||
205 | interrupt-parent = < &ipic >; | ||
206 | }; | ||
207 | |||
208 | crypto@30000 { | ||
209 | model = "SEC3"; | ||
210 | device_type = "crypto"; | ||
211 | compatible = "talitos"; | ||
212 | reg = <0x30000 0x10000>; | ||
213 | interrupts = <11 8>; | ||
214 | interrupt-parent = < &ipic >; | ||
215 | /* Rev. 3.0 geometry */ | ||
216 | num-channels = <4>; | ||
217 | channel-fifo-len = <24>; | ||
218 | exec-units-mask = <0x000001fe>; | ||
219 | descriptor-types-mask = <0x03ab0ebf>; | ||
220 | }; | ||
221 | |||
222 | sata@18000 { | ||
223 | compatible = "fsl,mpc8315-sata", "fsl,pq-sata"; | ||
224 | reg = <0x18000 0x1000>; | ||
225 | cell-index = <1>; | ||
226 | interrupts = <44 8>; | ||
227 | interrupt-parent = < &ipic >; | ||
228 | }; | ||
229 | |||
230 | sata@19000 { | ||
231 | compatible = "fsl,mpc8315-sata", "fsl,pq-sata"; | ||
232 | reg = <0x19000 0x1000>; | ||
233 | cell-index = <2>; | ||
234 | interrupts = <45 8>; | ||
235 | interrupt-parent = < &ipic >; | ||
236 | }; | ||
237 | |||
238 | /* IPIC | ||
239 | * interrupts cell = <intr #, sense> | ||
240 | * sense values match linux IORESOURCE_IRQ_* defines: | ||
241 | * sense == 8: Level, low assertion | ||
242 | * sense == 2: Edge, high-to-low change | ||
243 | */ | ||
244 | ipic: interrupt-controller@700 { | ||
245 | interrupt-controller; | ||
246 | #address-cells = <0>; | ||
247 | #interrupt-cells = <2>; | ||
248 | reg = <0x700 0x100>; | ||
249 | device_type = "ipic"; | ||
250 | }; | ||
251 | }; | ||
252 | |||
253 | pci0: pci@e0008500 { | ||
254 | interrupt-map-mask = <0xf800 0 0 7>; | ||
255 | interrupt-map = < | ||
256 | /* IDSEL 0x0E -mini PCI */ | ||
257 | 0x7000 0 0 1 &ipic 18 8 | ||
258 | 0x7000 0 0 2 &ipic 18 8 | ||
259 | 0x7000 0 0 3 &ipic 18 8 | ||
260 | 0x7000 0 0 4 &ipic 18 8 | ||
261 | |||
262 | /* IDSEL 0x0F -mini PCI */ | ||
263 | 0x7800 0 0 1 &ipic 17 8 | ||
264 | 0x7800 0 0 2 &ipic 17 8 | ||
265 | 0x7800 0 0 3 &ipic 17 8 | ||
266 | 0x7800 0 0 4 &ipic 17 8 | ||
267 | |||
268 | /* IDSEL 0x10 - PCI slot */ | ||
269 | 0x8000 0 0 1 &ipic 48 8 | ||
270 | 0x8000 0 0 2 &ipic 17 8 | ||
271 | 0x8000 0 0 3 &ipic 48 8 | ||
272 | 0x8000 0 0 4 &ipic 17 8>; | ||
273 | interrupt-parent = < &ipic >; | ||
274 | interrupts = <66 8>; | ||
275 | bus-range = <0 0>; | ||
276 | ranges = <0x02000000 0 0x90000000 0x90000000 0 0x10000000 | ||
277 | 0x42000000 0 0x80000000 0x80000000 0 0x10000000 | ||
278 | 0x01000000 0 0x00000000 0xe0300000 0 0x00100000>; | ||
279 | clock-frequency = <66666666>; | ||
280 | #interrupt-cells = <1>; | ||
281 | #size-cells = <2>; | ||
282 | #address-cells = <3>; | ||
283 | reg = <0xe0008500 0x100>; | ||
284 | compatible = "fsl,mpc8349-pci"; | ||
285 | device_type = "pci"; | ||
286 | }; | ||
287 | }; | ||