1 files changed, 26 insertions, 2 deletions

diff --git a/arch/powerpc/boot/dts/lite5200.dts b/arch/powerpc/boot/dts/lite5200.dts
index 82ff2b13bc37..179a1785d645 100644
--- a/arch/powerpc/boot/dts/lite5200.dts
+++ b/arch/powerpc/boot/dts/lite5200.dts
@@ -134,12 +134,16 @@
                         compatible = "fsl,mpc5200-gpio";
                         reg = <0xb00 0x40>;
                         interrupts = <1 7 0>;
+                        gpio-controller;
+                        #gpio-cells = <2>;
                 };
 
                 gpio@c00 {
                         compatible = "fsl,mpc5200-gpio-wkup";
                         reg = <0xc00 0x40>;
                         interrupts = <1 8 0 0 3 0>;
+                        gpio-controller;
+                        #gpio-cells = <2>;
                 };
 
                 spi@f00 {
@@ -230,8 +234,8 @@
                         reg = <0x3000 0x400>;   // fec range, since we need to setup fec interrupts
                         interrupts = <2 5 0>;   // these are for "mii command finished", not link changes & co.
 
-                        phy0: ethernet-phy@1 {
-                                reg = <1>;
+                        phy0: ethernet-phy@0 {
+                                reg = <0>;
                         };
                 };
 
@@ -255,7 +259,13 @@
                         compatible = "fsl,mpc5200-i2c","fsl-i2c";
                         reg = <0x3d40 0x40>;
                         interrupts = <2 16 0>;
+
+                        eeprom@50 {
+                                compatible = "atmel,24c02";
+                                reg = <0x50>;
+                        };
                 };
+
                 sram@8000 {
                         compatible = "fsl,mpc5200-sram";
                         reg = <0x8000 0x4000>;
@@ -281,4 +291,18 @@
                           0x02000000 0 0xa0000000 0xa0000000 0 0x10000000
                           0x01000000 0 0x00000000 0xb0000000 0 0x01000000>;
         };
+
+        localbus {
+                compatible = "fsl,mpc5200-lpb","simple-bus";
+                #address-cells = <2>;
+                #size-cells = <1>;
+
+                ranges = <0 0 0xff000000 0x01000000>;
+
+                flash@0,0 {
+                        compatible = "amd,am29lv652d", "cfi-flash";
+                        reg = <0 0 0x01000000>;
+                        bank-width = <1>;
+                };
+        };
 };