1 files changed, 390 insertions, 0 deletions

diff --git a/arch/mips/sni/pcimt.c b/arch/mips/sni/pcimt.c
new file mode 100644
index 000000000000..6c0dad7cbf4e
--- /dev/null
+++ b/arch/mips/sni/pcimt.c
@@ -0,0 +1,390 @@
+/*
+ * PCIMT specific code
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1996, 97, 98, 2000, 03, 04, 06 Ralf Baechle (ralf@linux-mips.org)
+ * Copyright (C) 2006 Thomas Bogendoerfer (tsbogend@alpha.franken.de)
+ */
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/serial_8250.h>
+
+#include <asm/mc146818-time.h>
+#include <asm/sni.h>
+#include <asm/time.h>
+#include <asm/i8259.h>
+#include <asm/irq_cpu.h>
+
+#define cacheconf (*(volatile unsigned int *)PCIMT_CACHECONF)
+#define invspace (*(volatile unsigned int *)PCIMT_INVSPACE)
+
+static void __init sni_pcimt_sc_init(void)
+{
+        unsigned int scsiz, sc_size;
+
+        scsiz = cacheconf & 7;
+        if (scsiz == 0) {
+                printk("Second level cache is deactived.\n");
+                return;
+        }
+        if (scsiz >= 6) {
+                printk("Invalid second level cache size configured, "
+                       "deactivating second level cache.\n");
+                cacheconf = 0;
+                return;
+        }
+
+        sc_size = 128 << scsiz;
+        printk("%dkb second level cache detected, deactivating.\n", sc_size);
+        cacheconf = 0;
+}
+
+
+/*
+ * A bit more gossip about the iron we're running on ...
+ */
+static inline void sni_pcimt_detect(void)
+{
+        char boardtype[80];
+        unsigned char csmsr;
+        char *p = boardtype;
+        unsigned int asic;
+
+        csmsr = *(volatile unsigned char *)PCIMT_CSMSR;
+
+        p += sprintf(p, "%s PCI", (csmsr & 0x80) ? "RM200" : "RM300");
+        if ((csmsr & 0x80) == 0)
+                p += sprintf(p, ", board revision %s",
+                             (csmsr & 0x20) ? "D" : "C");
+        asic = csmsr & 0x80;
+        asic = (csmsr & 0x08) ? asic : !asic;
+        p += sprintf(p, ", ASIC PCI Rev %s", asic ? "1.0" : "1.1");
+        printk("%s.\n", boardtype);
+}
+
+#define PORT(_base,_irq)                                \
+        {                                               \
+                .iobase         = _base,                \
+                .irq            = _irq,                 \
+                .uartclk        = 1843200,              \
+                .iotype         = UPIO_PORT,            \
+                .flags          = UPF_BOOT_AUTOCONF,    \
+        }
+
+static struct plat_serial8250_port pcimt_data[] = {
+        PORT(0x3f8, 4),
+        PORT(0x2f8, 3),
+        { },
+};
+
+static struct platform_device pcimt_serial8250_device = {
+        .name                   = "serial8250",
+        .id                     = PLAT8250_DEV_PLATFORM,
+        .dev                    = {
+                .platform_data  = pcimt_data,
+        },
+};
+
+static struct resource sni_io_resource = {
+        .start  = 0x00001000UL,
+        .end    = 0x03bfffffUL,
+        .name   = "PCIMT IO MEM",
+        .flags  = IORESOURCE_IO,
+};
+
+static struct resource pcimt_io_resources[] = {
+        {
+                .start  = 0x00,
+                .end    = 0x1f,
+                .name   = "dma1",
+                .flags  = IORESOURCE_BUSY
+        }, {
+                .start  =  0x40,
+                .end    = 0x5f,
+                .name   = "timer",
+                .flags  = IORESOURCE_BUSY
+        }, {
+                .start  =  0x60,
+                .end    = 0x6f,
+                .name   = "keyboard",
+                .flags  = IORESOURCE_BUSY
+        }, {
+                .start  =  0x80,
+                .end    = 0x8f,
+                .name   = "dma page reg",
+                .flags  = IORESOURCE_BUSY
+        }, {
+                .start  =  0xc0,
+                .end    = 0xdf,
+                .name   = "dma2",
+                .flags  = IORESOURCE_BUSY
+        }, {
+                .start  =  0xcfc,
+                .end    = 0xcff,
+                .name   = "PCI config data",
+                .flags  = IORESOURCE_BUSY
+        }
+};
+
+static struct resource sni_mem_resource = {
+        .start  = 0x10000000UL,
+        .end    = 0xffffffffUL,
+        .name   = "PCIMT PCI MEM",
+        .flags  = IORESOURCE_MEM
+};
+
+/*
+ * The RM200/RM300 has a few holes in it's PCI/EISA memory address space used
+ * for other purposes.  Be paranoid and allocate all of the before the PCI
+ * code gets a chance to to map anything else there ...
+ *
+ * This leaves the following areas available:
+ *
+ * 0x10000000 - 0x1009ffff (640kB) PCI/EISA/ISA Bus Memory
+ * 0x10100000 - 0x13ffffff ( 15MB) PCI/EISA/ISA Bus Memory
+ * 0x18000000 - 0x1fbfffff (124MB) PCI/EISA Bus Memory
+ * 0x1ff08000 - 0x1ffeffff (816kB) PCI/EISA Bus Memory
+ * 0xa0000000 - 0xffffffff (1.5GB) PCI/EISA Bus Memory
+ */
+static struct resource pcimt_mem_resources[] = {
+        {
+                .start  = 0x100a0000,
+                .end    = 0x100bffff,
+                .name   = "Video RAM area",
+                .flags  = IORESOURCE_BUSY
+        }, {
+                .start  = 0x100c0000,
+                .end    = 0x100fffff,
+                .name   = "ISA Reserved",
+                .flags  = IORESOURCE_BUSY
+        }, {
+                .start  = 0x14000000,
+                .end    = 0x17bfffff,
+                .name   = "PCI IO",
+                .flags  = IORESOURCE_BUSY
+        }, {
+                .start  = 0x17c00000,
+                .end    = 0x17ffffff,
+                .name   = "Cache Replacement Area",
+                .flags  = IORESOURCE_BUSY
+        }, {
+                .start  = 0x1a000000,
+                .end    = 0x1a000003,
+                .name   = "PCI INT Acknowledge",
+                .flags  = IORESOURCE_BUSY
+        }, {
+                .start  = 0x1fc00000,
+                .end    = 0x1fc7ffff,
+                .name   = "Boot PROM",
+                .flags  = IORESOURCE_BUSY
+        }, {
+                .start  = 0x1fc80000,
+                .end    = 0x1fcfffff,
+                .name   = "Diag PROM",
+                .flags  = IORESOURCE_BUSY
+        }, {
+                .start  = 0x1fd00000,
+                .end    = 0x1fdfffff,
+                .name   = "X-Bus",
+                .flags  = IORESOURCE_BUSY
+        }, {
+                .start  = 0x1fe00000,
+                .end    = 0x1fefffff,
+                .name   = "BIOS map",
+                .flags  = IORESOURCE_BUSY
+        }, {
+                .start  = 0x1ff00000,
+                .end    = 0x1ff7ffff,
+                .name   = "NVRAM / EEPROM",
+                .flags  = IORESOURCE_BUSY
+        }, {
+                .start  = 0x1fff0000,
+                .end    = 0x1fffefff,
+                .name   = "ASIC PCI",
+                .flags  = IORESOURCE_BUSY
+        }, {
+                .start  = 0x1ffff000,
+                .end    = 0x1fffffff,
+                .name   = "MP Agent",
+                .flags  = IORESOURCE_BUSY
+        }, {
+                .start  = 0x20000000,
+                .end    = 0x9fffffff,
+                .name   = "Main Memory",
+                .flags  = IORESOURCE_BUSY
+        }
+};
+
+static void __init sni_pcimt_resource_init(void)
+{
+        int i;
+
+        /* request I/O space for devices used on all i[345]86 PCs */
+        for (i = 0; i < ARRAY_SIZE(pcimt_io_resources); i++)
+                request_resource(&ioport_resource, pcimt_io_resources + i);
+
+        /* request mem space for pcimt-specific devices */
+        for (i = 0; i < ARRAY_SIZE(pcimt_mem_resources); i++)
+                request_resource(&sni_mem_resource, pcimt_mem_resources + i);
+
+        ioport_resource.end = sni_io_resource.end;
+}
+
+extern struct pci_ops sni_pcimt_ops;
+
+static struct pci_controller sni_controller = {
+        .pci_ops        = &sni_pcimt_ops,
+        .mem_resource   = &sni_mem_resource,
+        .mem_offset     = 0x10000000UL,
+        .io_resource    = &sni_io_resource,
+        .io_offset      = 0x00000000UL
+};
+
+static void enable_pcimt_irq(unsigned int irq)
+{
+        unsigned int mask = 1 << (irq - PCIMT_IRQ_INT2);
+
+        *(volatile u8 *) PCIMT_IRQSEL |= mask;
+}
+
+void disable_pcimt_irq(unsigned int irq)
+{
+        unsigned int mask = ~(1 << (irq - PCIMT_IRQ_INT2));
+
+        *(volatile u8 *) PCIMT_IRQSEL &= mask;
+}
+
+static void end_pcimt_irq(unsigned int irq)
+{
+        if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
+                enable_pcimt_irq(irq);
+}
+
+static struct irq_chip pcimt_irq_type = {
+        .typename = "PCIMT",
+        .ack = disable_pcimt_irq,
+        .mask = disable_pcimt_irq,
+        .mask_ack = disable_pcimt_irq,
+        .unmask = enable_pcimt_irq,
+        .end = end_pcimt_irq,
+};
+
+/*
+ * hwint0 should deal with MP agent, ASIC PCI, EISA NMI and debug
+ * button interrupts.  Later ...
+ */
+static void pcimt_hwint0(void)
+{
+        panic("Received int0 but no handler yet ...");
+}
+
+/*
+ * hwint 1 deals with EISA and SCSI interrupts,
+ *
+ * The EISA_INT bit in CSITPEND is high active, all others are low active.
+ */
+static void pcimt_hwint1(void)
+{
+        u8 pend = *(volatile char *)PCIMT_CSITPEND;
+        unsigned long flags;
+
+        if (pend & IT_EISA) {
+                int irq;
+                /*
+                 * Note: ASIC PCI's builtin interrupt achknowledge feature is
+                 * broken.  Using it may result in loss of some or all i8259
+                 * interupts, so don't use PCIMT_INT_ACKNOWLEDGE ...
+                 */
+                irq = i8259_irq();
+                if (unlikely(irq < 0))
+                        return;
+
+                do_IRQ(irq);
+        }
+
+        if (!(pend & IT_SCSI)) {
+                flags = read_c0_status();
+                clear_c0_status(ST0_IM);
+                do_IRQ(PCIMT_IRQ_SCSI);
+                write_c0_status(flags);
+        }
+}
+
+/*
+ * hwint 3 should deal with the PCI A - D interrupts,
+ */
+static void pcimt_hwint3(void)
+{
+        u8 pend = *(volatile char *)PCIMT_CSITPEND;
+        int irq;
+
+        pend &= (IT_INTA | IT_INTB | IT_INTC | IT_INTD);
+        pend ^= (IT_INTA | IT_INTB | IT_INTC | IT_INTD);
+        clear_c0_status(IE_IRQ3);
+        irq = PCIMT_IRQ_INT2 + ffs(pend) - 1;
+        do_IRQ(irq);
+        set_c0_status(IE_IRQ3);
+}
+
+static void sni_pcimt_hwint(void)
+{
+        u32 pending = (read_c0_cause() & read_c0_status());
+
+        if (pending & C_IRQ5)
+                do_IRQ (SNI_MIPS_IRQ_CPU_BASE + 7);
+        else if (pending & C_IRQ4)
+                do_IRQ (SNI_MIPS_IRQ_CPU_BASE + 6);
+        else if (pending & C_IRQ3)
+                pcimt_hwint3();
+        else if (pending & C_IRQ1)
+                pcimt_hwint1();
+        else if (pending & C_IRQ0) {
+                pcimt_hwint0();
+        }
+}
+
+void __init sni_pcimt_irq_init(void)
+{
+        int i;
+
+        *(volatile u8 *) PCIMT_IRQSEL = IT_ETH | IT_EISA;
+        mips_cpu_irq_init();
+        /* Actually we've got more interrupts to handle ...  */
+        for (i = PCIMT_IRQ_INT2; i <= PCIMT_IRQ_SCSI; i++)
+                set_irq_chip(i, &pcimt_irq_type);
+        sni_hwint = sni_pcimt_hwint;
+        change_c0_status(ST0_IM, IE_IRQ1|IE_IRQ3);
+}
+
+void sni_pcimt_init(void)
+{
+        sni_pcimt_resource_init();
+        sni_pcimt_detect();
+        sni_pcimt_sc_init();
+        rtc_mips_get_time = mc146818_get_cmos_time;
+        rtc_mips_set_time = mc146818_set_rtc_mmss;
+        board_time_init = sni_cpu_time_init;
+#ifdef CONFIG_PCI
+        register_pci_controller(&sni_controller);
+#endif
+}
+
+static int __init snirm_pcimt_setup_devinit(void)
+{
+        switch (sni_brd_type) {
+        case SNI_BRD_PCI_MTOWER:
+        case SNI_BRD_PCI_DESKTOP:
+        case SNI_BRD_PCI_MTOWER_CPLUS:
+                platform_device_register(&pcimt_serial8250_device);
+                break;
+        }
+
+        return 0;
+}
+
+device_initcall(snirm_pcimt_setup_devinit);