1 files changed, 79 insertions, 0 deletions

diff --git a/arch/mips/rb532/setup.c b/arch/mips/rb532/setup.c
new file mode 100644
index 000000000000..7aafa95ac20b
--- /dev/null
+++ b/arch/mips/rb532/setup.c
@@ -0,0 +1,79 @@
+/*
+ * setup.c - boot time setup code
+ */
+
+#include <linux/init.h>
+
+#include <asm/bootinfo.h>
+#include <asm/reboot.h>
+#include <asm/time.h>
+#include <linux/ioport.h>
+
+#include <asm/mach-rc32434/rc32434.h>
+#include <asm/mach-rc32434/pci.h>
+
+struct pci_reg __iomem *pci_reg;
+EXPORT_SYMBOL(pci_reg);
+
+static struct resource pci0_res[] = {
+        {
+                .name = "pci_reg0",
+                .start = PCI0_BASE_ADDR,
+                .end = PCI0_BASE_ADDR + sizeof(struct pci_reg),
+                .flags = IORESOURCE_MEM,
+        }
+};
+
+static void rb_machine_restart(char *command)
+{
+        /* just jump to the reset vector */
+        writel(0x80000001, (void *)KSEG1ADDR(RC32434_REG_BASE + RC32434_RST));
+        ((void (*)(void)) KSEG1ADDR(0x1FC00000u))();
+}
+
+static void rb_machine_halt(void)
+{
+        for (;;)
+                continue;
+}
+
+void __init plat_mem_setup(void)
+{
+        u32 val;
+
+        _machine_restart = rb_machine_restart;
+        _machine_halt = rb_machine_halt;
+        pm_power_off = rb_machine_halt;
+
+        set_io_port_base(KSEG1);
+
+        pci_reg = ioremap_nocache(pci0_res[0].start,
+                                pci0_res[0].end - pci0_res[0].start);
+        if (!pci_reg) {
+                printk(KERN_ERR "Could not remap PCI registers\n");
+                return;
+        }
+
+        val = __raw_readl(&pci_reg->pcic);
+        val &= 0xFFFFFF7;
+        __raw_writel(val, (void *)&pci_reg->pcic);
+
+#ifdef CONFIG_PCI
+        /* Enable PCI interrupts in EPLD Mask register */
+        *epld_mask = 0x0;
+        *(epld_mask + 1) = 0x0;
+#endif
+        write_c0_wired(0);
+}
+
+const char *get_system_type(void)
+{
+        switch (mips_machtype) {
+        case MACH_MIKROTIK_RB532A:
+                return "Mikrotik RB532A";
+                break;
+        default:
+                return "Mikrotik RB532";
+                break;
+        }
+}