2 files changed, 9 insertions, 9 deletions

diff --git a/arch/mips/pmc-sierra/yosemite/atmel_read_eeprom.c b/arch/mips/pmc-sierra/yosemite/atmel_read_eeprom.c
index b067988614c3..97862f45496d 100644
--- a/arch/mips/pmc-sierra/yosemite/atmel_read_eeprom.c
+++ b/arch/mips/pmc-sierra/yosemite/atmel_read_eeprom.c
@@ -30,7 +30,7 @@
  *
  * This code reads the ATMEL 24CXX EEPROM. The PMC-Sierra Yosemite board uses the ATMEL
  * 24C32/24C64 which uses two byte addressing as compared to 24C16. Note that this program
- * uses the serial port like /dev/ttyS0, to communicate with the EEPROM. Hence, you are 
+ * uses the serial port like /dev/ttyS0, to communicate with the EEPROM. Hence, you are
  * expected to have a connectivity from the EEPROM to the serial port. This program does
  * __not__ communicate using the I2C protocol
  */
@@ -64,14 +64,14 @@ static void send_ack(void)
 static void send_byte(unsigned char byte)
 {
         int     i = 0;
-        
-        for (i = 7; i >= 0; i--) 
+
+        for (i = 7; i >= 0; i--)
                 send_bit((byte >> i) & 0x01);
 }
-        
+
 static void send_start(void)
 {
-        sda_hi; 
+        sda_hi;
         delay(TXX);
         scl_hi;
         delay(TXX);
@@ -114,9 +114,9 @@ static unsigned char recv_byte(void) {
         int i;
         unsigned char byte=0;
 
-        for (i=7;i>=0;i--)                             
+        for (i=7;i>=0;i--)
                 byte |= (recv_bit() << i);
- 
+
         return byte;
 }
 
diff --git a/arch/mips/pmc-sierra/yosemite/atmel_read_eeprom.h b/arch/mips/pmc-sierra/yosemite/atmel_read_eeprom.h
index d27566d99ffc..c19f01a32045 100644
--- a/arch/mips/pmc-sierra/yosemite/atmel_read_eeprom.h
+++ b/arch/mips/pmc-sierra/yosemite/atmel_read_eeprom.h
@@ -27,7 +27,7 @@
  */
 
 /*
- * Header file for atmel_read_eeprom.c 
+ * Header file for atmel_read_eeprom.c
  */
 
 #include <linux/types.h>
@@ -46,7 +46,7 @@
 #define DEFAULT_PORT    "/dev/ttyS0"    /* Port to open */
 #define TXX             0               /* Dummy loop for spinning */
 
-#define BLOCK_SEL       0x00            
+#define BLOCK_SEL       0x00
 #define SLAVE_ADDR      0xa0
 #define READ_BIT        0x01
 #define WRITE_BIT       0x00