1 files changed, 224 insertions, 0 deletions

diff --git a/arch/mips/pci/pci-bcm1480ht.c b/arch/mips/pci/pci-bcm1480ht.c
new file mode 100644
index 000000000000..aca4a2e7a1c6
--- /dev/null
+++ b/arch/mips/pci/pci-bcm1480ht.c
@@ -0,0 +1,224 @@
+/*
+ * Copyright (C) 2001,2002,2005 Broadcom Corporation
+ * Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+
+/*
+ * BCM1480/1455-specific HT support (looking like PCI)
+ *
+ * This module provides the glue between Linux's PCI subsystem
+ * and the hardware.  We basically provide glue for accessing
+ * configuration space, and set up the translation for I/O
+ * space accesses.
+ *
+ * To access configuration space, we use ioremap.  In the 32-bit
+ * kernel, this consumes either 4 or 8 page table pages, and 16MB of
+ * kernel mapped memory.  Hopefully neither of these should be a huge
+ * problem.
+ *
+ */
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/console.h>
+#include <linux/tty.h>
+
+#include <asm/sibyte/bcm1480_regs.h>
+#include <asm/sibyte/bcm1480_scd.h>
+#include <asm/sibyte/board.h>
+#include <asm/io.h>
+
+/*
+ * Macros for calculating offsets into config space given a device
+ * structure or dev/fun/reg
+ */
+#define CFGOFFSET(bus,devfn,where) (((bus)<<16)+((devfn)<<8)+(where))
+#define CFGADDR(bus,devfn,where)   CFGOFFSET((bus)->number,(devfn),where)
+
+static void *ht_cfg_space;
+
+#define PCI_BUS_ENABLED 1
+#define PCI_DEVICE_MODE 2
+
+static int bcm1480ht_bus_status = 0;
+
+#define PCI_BRIDGE_DEVICE  0
+#define HT_BRIDGE_DEVICE   1
+
+/*
+ * HT's level-sensitive interrupts require EOI, which is generated
+ * through a 4MB memory-mapped region
+ */
+unsigned long ht_eoi_space;
+
+/*
+ * Read/write 32-bit values in config space.
+ */
+static inline u32 READCFG32(u32 addr)
+{
+        return *(u32 *)(ht_cfg_space + (addr&~3));
+}
+
+static inline void WRITECFG32(u32 addr, u32 data)
+{
+        *(u32 *)(ht_cfg_space + (addr & ~3)) = data;
+}
+
+/*
+ * Some checks before doing config cycles:
+ * In PCI Device Mode, hide everything on bus 0 except the LDT host
+ * bridge.  Otherwise, access is controlled by bridge MasterEn bits.
+ */
+static int bcm1480ht_can_access(struct pci_bus *bus, int devfn)
+{
+        u32 devno;
+
+        if (!(bcm1480ht_bus_status & (PCI_BUS_ENABLED | PCI_DEVICE_MODE)))
+                return 0;
+
+        if (bus->number == 0) {
+                devno = PCI_SLOT(devfn);
+                if (bcm1480ht_bus_status & PCI_DEVICE_MODE)
+                        return 0;
+        }
+        return 1;
+}
+
+/*
+ * Read/write access functions for various sizes of values
+ * in config space.  Return all 1's for disallowed accesses
+ * for a kludgy but adequate simulation of master aborts.
+ */
+
+static int bcm1480ht_pcibios_read(struct pci_bus *bus, unsigned int devfn,
+                                  int where, int size, u32 * val)
+{
+        u32 data = 0;
+
+        if ((size == 2) && (where & 1))
+                return PCIBIOS_BAD_REGISTER_NUMBER;
+        else if ((size == 4) && (where & 3))
+                return PCIBIOS_BAD_REGISTER_NUMBER;
+
+        if (bcm1480ht_can_access(bus, devfn))
+                data = READCFG32(CFGADDR(bus, devfn, where));
+        else
+                data = 0xFFFFFFFF;
+
+        if (size == 1)
+                *val = (data >> ((where & 3) << 3)) & 0xff;
+        else if (size == 2)
+                *val = (data >> ((where & 3) << 3)) & 0xffff;
+        else
+                *val = data;
+
+        return PCIBIOS_SUCCESSFUL;
+}
+
+static int bcm1480ht_pcibios_write(struct pci_bus *bus, unsigned int devfn,
+                                   int where, int size, u32 val)
+{
+        u32 cfgaddr = CFGADDR(bus, devfn, where);
+        u32 data = 0;
+
+        if ((size == 2) && (where & 1))
+                return PCIBIOS_BAD_REGISTER_NUMBER;
+        else if ((size == 4) && (where & 3))
+                return PCIBIOS_BAD_REGISTER_NUMBER;
+
+        if (!bcm1480ht_can_access(bus, devfn))
+                return PCIBIOS_BAD_REGISTER_NUMBER;
+
+        data = READCFG32(cfgaddr);
+
+        if (size == 1)
+                data = (data & ~(0xff << ((where & 3) << 3))) |
+                    (val << ((where & 3) << 3));
+        else if (size == 2)
+                data = (data & ~(0xffff << ((where & 3) << 3))) |
+                    (val << ((where & 3) << 3));
+        else
+                data = val;
+
+        WRITECFG32(cfgaddr, data);
+
+        return PCIBIOS_SUCCESSFUL;
+}
+
+static int bcm1480ht_pcibios_get_busno(void)
+{
+        return 0;
+}
+
+struct pci_ops bcm1480ht_pci_ops = {
+        .read   = bcm1480ht_pcibios_read,
+        .write  = bcm1480ht_pcibios_write,
+};
+
+static struct resource bcm1480ht_mem_resource = {
+        .name   = "BCM1480 HT MEM",
+        .start  = 0x40000000UL,
+        .end    = 0x5fffffffUL,
+        .flags  = IORESOURCE_MEM,
+};
+
+static struct resource bcm1480ht_io_resource = {
+        .name   = "BCM1480 HT I/O",
+        .start  = 0x00000000UL,
+        .end    = 0x01ffffffUL,
+        .flags  = IORESOURCE_IO,
+};
+
+struct pci_controller bcm1480ht_controller = {
+        .pci_ops        = &bcm1480ht_pci_ops,
+        .mem_resource   = &bcm1480ht_mem_resource,
+        .io_resource    = &bcm1480ht_io_resource,
+        .index          = 1,
+        .get_busno      = bcm1480ht_pcibios_get_busno,
+};
+
+static int __init bcm1480ht_pcibios_init(void)
+{
+        uint32_t cmdreg;
+
+        ht_cfg_space = ioremap(A_BCM1480_PHYS_HT_CFG_MATCH_BITS, 16*1024*1024);
+
+        /*
+         * See if the PCI bus has been configured by the firmware.
+         */
+        cmdreg = READCFG32(CFGOFFSET(0, PCI_DEVFN(PCI_BRIDGE_DEVICE, 0),
+                                     PCI_COMMAND));
+        if (!(cmdreg & PCI_COMMAND_MASTER)) {
+                printk("HT: Skipping HT probe. Bus is not initialized.\n");
+                iounmap(ht_cfg_space);
+                return 1; /* XXX */
+        }
+        bcm1480ht_bus_status |= PCI_BUS_ENABLED;
+
+        ht_eoi_space = (unsigned long)
+                ioremap(A_BCM1480_PHYS_HT_SPECIAL_MATCH_BYTES,
+                        4 * 1024 * 1024);
+
+        register_pci_controller(&bcm1480ht_controller);
+
+        return 0;
+}
+
+arch_initcall(bcm1480ht_pcibios_init);