1 files changed, 188 insertions, 0 deletions

diff --git a/arch/mips/loongson/lemote-2f/ec_kb3310b.h b/arch/mips/loongson/lemote-2f/ec_kb3310b.h
new file mode 100644
index 000000000000..1595a21b315b
--- /dev/null
+++ b/arch/mips/loongson/lemote-2f/ec_kb3310b.h
@@ -0,0 +1,188 @@
+/*
+ * KB3310B Embedded Controller
+ *
+ *  Copyright (C) 2008 Lemote Inc.
+ *  Author: liujl <liujl@lemote.com>, 2008-03-14
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef _EC_KB3310B_H
+#define _EC_KB3310B_H
+
+extern unsigned char ec_read(unsigned short addr);
+extern void ec_write(unsigned short addr, unsigned char val);
+extern int ec_query_seq(unsigned char cmd);
+extern int ec_query_event_num(void);
+extern int ec_get_event_num(void);
+
+typedef int (*sci_handler) (int status);
+extern sci_handler yeeloong_report_lid_status;
+
+#define SCI_IRQ_NUM 0x0A
+
+/*
+ * The following registers are determined by the EC index configuration.
+ * 1, fill the PORT_HIGH as EC register high part.
+ * 2, fill the PORT_LOW as EC register low part.
+ * 3, fill the PORT_DATA as EC register write data or get the data from it.
+ */
+#define EC_IO_PORT_HIGH 0x0381
+#define EC_IO_PORT_LOW  0x0382
+#define EC_IO_PORT_DATA 0x0383
+
+/*
+ * EC delay time is 500us for register and status access
+ */
+#define EC_REG_DELAY    500     /* unit : us */
+#define EC_CMD_TIMEOUT  0x1000
+
+/*
+ * EC access port for SCI communication
+ */
+#define EC_CMD_PORT             0x66
+#define EC_STS_PORT             0x66
+#define EC_DAT_PORT             0x62
+#define CMD_INIT_IDLE_MODE      0xdd
+#define CMD_EXIT_IDLE_MODE      0xdf
+#define CMD_INIT_RESET_MODE     0xd8
+#define CMD_REBOOT_SYSTEM       0x8c
+#define CMD_GET_EVENT_NUM       0x84
+#define CMD_PROGRAM_PIECE       0xda
+
+/* temperature & fan registers */
+#define REG_TEMPERATURE_VALUE   0xF458
+#define REG_FAN_AUTO_MAN_SWITCH 0xF459
+#define BIT_FAN_AUTO            0
+#define BIT_FAN_MANUAL          1
+#define REG_FAN_CONTROL         0xF4D2
+#define BIT_FAN_CONTROL_ON      (1 << 0)
+#define BIT_FAN_CONTROL_OFF     (0 << 0)
+#define REG_FAN_STATUS          0xF4DA
+#define BIT_FAN_STATUS_ON       (1 << 0)
+#define BIT_FAN_STATUS_OFF      (0 << 0)
+#define REG_FAN_SPEED_HIGH      0xFE22
+#define REG_FAN_SPEED_LOW       0xFE23
+#define REG_FAN_SPEED_LEVEL     0xF4CC
+/* fan speed divider */
+#define FAN_SPEED_DIVIDER       480000  /* (60*1000*1000/62.5/2)*/
+
+/* battery registers */
+#define REG_BAT_DESIGN_CAP_HIGH         0xF77D
+#define REG_BAT_DESIGN_CAP_LOW          0xF77E
+#define REG_BAT_FULLCHG_CAP_HIGH        0xF780
+#define REG_BAT_FULLCHG_CAP_LOW         0xF781
+#define REG_BAT_DESIGN_VOL_HIGH         0xF782
+#define REG_BAT_DESIGN_VOL_LOW          0xF783
+#define REG_BAT_CURRENT_HIGH            0xF784
+#define REG_BAT_CURRENT_LOW             0xF785
+#define REG_BAT_VOLTAGE_HIGH            0xF786
+#define REG_BAT_VOLTAGE_LOW             0xF787
+#define REG_BAT_TEMPERATURE_HIGH        0xF788
+#define REG_BAT_TEMPERATURE_LOW         0xF789
+#define REG_BAT_RELATIVE_CAP_HIGH       0xF492
+#define REG_BAT_RELATIVE_CAP_LOW        0xF493
+#define REG_BAT_VENDOR                  0xF4C4
+#define FLAG_BAT_VENDOR_SANYO           0x01
+#define FLAG_BAT_VENDOR_SIMPLO          0x02
+#define REG_BAT_CELL_COUNT              0xF4C6
+#define FLAG_BAT_CELL_3S1P              0x03
+#define FLAG_BAT_CELL_3S2P              0x06
+#define REG_BAT_CHARGE                  0xF4A2
+#define FLAG_BAT_CHARGE_DISCHARGE       0x01
+#define FLAG_BAT_CHARGE_CHARGE          0x02
+#define FLAG_BAT_CHARGE_ACPOWER         0x00
+#define REG_BAT_STATUS                  0xF4B0
+#define BIT_BAT_STATUS_LOW              (1 << 5)
+#define BIT_BAT_STATUS_DESTROY          (1 << 2)
+#define BIT_BAT_STATUS_FULL             (1 << 1)
+#define BIT_BAT_STATUS_IN               (1 << 0)
+#define REG_BAT_CHARGE_STATUS           0xF4B1
+#define BIT_BAT_CHARGE_STATUS_OVERTEMP  (1 << 2)
+#define BIT_BAT_CHARGE_STATUS_PRECHG    (1 << 1)
+#define REG_BAT_STATE                   0xF482
+#define BIT_BAT_STATE_CHARGING          (1 << 1)
+#define BIT_BAT_STATE_DISCHARGING       (1 << 0)
+#define REG_BAT_POWER                   0xF440
+#define BIT_BAT_POWER_S3                (1 << 2)
+#define BIT_BAT_POWER_ON                (1 << 1)
+#define BIT_BAT_POWER_ACIN              (1 << 0)
+
+/* other registers */
+/* Audio: rd/wr */
+#define REG_AUDIO_VOLUME        0xF46C
+#define REG_AUDIO_MUTE          0xF4E7
+#define REG_AUDIO_BEEP          0xF4D0
+/* USB port power or not: rd/wr */
+#define REG_USB0_FLAG           0xF461
+#define REG_USB1_FLAG           0xF462
+#define REG_USB2_FLAG           0xF463
+#define BIT_USB_FLAG_ON         1
+#define BIT_USB_FLAG_OFF        0
+/* LID */
+#define REG_LID_DETECT          0xF4BD
+#define BIT_LID_DETECT_ON       1
+#define BIT_LID_DETECT_OFF      0
+/* CRT */
+#define REG_CRT_DETECT          0xF4AD
+#define BIT_CRT_DETECT_PLUG     1
+#define BIT_CRT_DETECT_UNPLUG   0
+/* LCD backlight brightness adjust: 9 levels */
+#define REG_DISPLAY_BRIGHTNESS  0xF4F5
+/* Black screen Status */
+#define BIT_DISPLAY_LCD_ON      1
+#define BIT_DISPLAY_LCD_OFF     0
+/* LCD backlight control: off/restore */
+#define REG_BACKLIGHT_CTRL      0xF7BD
+#define BIT_BACKLIGHT_ON        1
+#define BIT_BACKLIGHT_OFF       0
+/* Reset the machine auto-clear: rd/wr */
+#define REG_RESET               0xF4EC
+#define BIT_RESET_ON            1
+/* Light the led: rd/wr */
+#define REG_LED                 0xF4C8
+#define BIT_LED_RED_POWER       (1 << 0)
+#define BIT_LED_ORANGE_POWER    (1 << 1)
+#define BIT_LED_GREEN_CHARGE    (1 << 2)
+#define BIT_LED_RED_CHARGE      (1 << 3)
+#define BIT_LED_NUMLOCK         (1 << 4)
+/* Test led mode, all led on/off */
+#define REG_LED_TEST            0xF4C2
+#define BIT_LED_TEST_IN         1
+#define BIT_LED_TEST_OUT        0
+/* Camera on/off */
+#define REG_CAMERA_STATUS       0xF46A
+#define BIT_CAMERA_STATUS_ON    1
+#define BIT_CAMERA_STATUS_OFF   0
+#define REG_CAMERA_CONTROL      0xF7B7
+#define BIT_CAMERA_CONTROL_OFF  0
+#define BIT_CAMERA_CONTROL_ON   1
+/* Wlan Status */
+#define REG_WLAN                0xF4FA
+#define BIT_WLAN_ON             1
+#define BIT_WLAN_OFF            0
+#define REG_DISPLAY_LCD         0xF79F
+
+/* SCI Event Number from EC */
+enum {
+        EVENT_LID = 0x23,       /*  LID open/close */
+        EVENT_DISPLAY_TOGGLE,   /*  Fn+F3 for display switch */
+        EVENT_SLEEP,            /*  Fn+F1 for entering sleep mode */
+        EVENT_OVERTEMP,         /*  Over-temperature happened */
+        EVENT_CRT_DETECT,       /*  CRT is connected */
+        EVENT_CAMERA,           /*  Camera on/off */
+        EVENT_USB_OC2,          /*  USB2 Over Current occurred */
+        EVENT_USB_OC0,          /*  USB0 Over Current occurred */
+        EVENT_BLACK_SCREEN,     /*  Turn on/off backlight */
+        EVENT_AUDIO_MUTE,       /*  Mute on/off */
+        EVENT_DISPLAY_BRIGHTNESS,/* LCD backlight brightness adjust */
+        EVENT_AC_BAT,           /*  AC & Battery relative issue */
+        EVENT_AUDIO_VOLUME,     /*  Volume adjust */
+        EVENT_WLAN,             /*  Wlan on/off */
+        EVENT_END
+};
+
+#endif /* !_EC_KB3310B_H */