4 files changed, 105 insertions, 120 deletions

diff --git a/arch/mips/au1000/pb1200/Makefile b/arch/mips/au1000/pb1200/Makefile
index 4fe02ea65a60..d678adf7ce85 100644
--- a/arch/mips/au1000/pb1200/Makefile
+++ b/arch/mips/au1000/pb1200/Makefile
@@ -1,5 +1,5 @@
 #
-# Makefile for the Alchemy Semiconductor PB1200 board.
+# Makefile for the Alchemy Semiconductor Pb1200/DBAu1200 boards.
 #
 
 lib-y := init.o board_setup.o irqmap.o
diff --git a/arch/mips/au1000/pb1200/board_setup.c b/arch/mips/au1000/pb1200/board_setup.c
index 4493a792cc4c..6cb2115059ad 100644
--- a/arch/mips/au1000/pb1200/board_setup.c
+++ b/arch/mips/au1000/pb1200/board_setup.c
@@ -27,16 +27,8 @@
 #include <linux/init.h>
 #include <linux/sched.h>
 
-#include <au1000.h>
 #include <prom.h>
-
-#ifdef CONFIG_MIPS_PB1200
-#include <asm/mach-pb1x00/pb1200.h>
-#endif
-
-#ifdef CONFIG_MIPS_DB1200
-#include <asm/mach-db1x00/db1200.h>
-#endif
+#include <au1xxx.h>
 
 extern void _board_init_irq(void);
 extern void (*board_init_irq)(void);
@@ -53,56 +45,57 @@ void __init board_setup(void)
 
 #if 0
         {
-        u32 pin_func;
-
-        /* Enable PSC1 SYNC for AC97.  Normaly done in audio driver,
-         * but it is board specific code, so put it here.
-         */
-        pin_func = au_readl(SYS_PINFUNC);
-        au_sync();
-        pin_func |= SYS_PF_MUST_BE_SET | SYS_PF_PSC1_S1;
-        au_writel(pin_func, SYS_PINFUNC);
-
-        au_writel(0, (u32)bcsr|0x10); /* turn off pcmcia power */
-        au_sync();
+                u32 pin_func;
+
+                /*
+                 * Enable PSC1 SYNC for AC97.  Normaly done in audio driver,
+                 * but it is board specific code, so put it here.
+                 */
+                pin_func = au_readl(SYS_PINFUNC);
+                au_sync();
+                pin_func |= SYS_PF_MUST_BE_SET | SYS_PF_PSC1_S1;
+                au_writel(pin_func, SYS_PINFUNC);
+
+                au_writel(0, (u32)bcsr | 0x10); /* turn off PCMCIA power */
+                au_sync();
         }
 #endif
 
 #if defined(CONFIG_I2C_AU1550)
         {
-        u32 freq0, clksrc;
-        u32 pin_func;
-
-        /* Select SMBUS in CPLD */
-        bcsr->resets &= ~(BCSR_RESETS_PCS0MUX);
-
-        pin_func = au_readl(SYS_PINFUNC);
-        au_sync();
-        pin_func &= ~(3<<17 | 1<<4);
-        /* Set GPIOs correctly */
-        pin_func |= 2<<17;
-        au_writel(pin_func, SYS_PINFUNC);
-        au_sync();
-
-        /* The i2c driver depends on 50Mhz clock */
-        freq0 = au_readl(SYS_FREQCTRL0);
-        au_sync();
-        freq0 &= ~(SYS_FC_FRDIV1_MASK | SYS_FC_FS1 | SYS_FC_FE1);
-        freq0 |= (3<<SYS_FC_FRDIV1_BIT);
-        /* 396Mhz / (3+1)*2 == 49.5Mhz */
-        au_writel(freq0, SYS_FREQCTRL0);
-        au_sync();
-        freq0 |= SYS_FC_FE1;
-        au_writel(freq0, SYS_FREQCTRL0);
-        au_sync();
-
-        clksrc = au_readl(SYS_CLKSRC);
-        au_sync();
-        clksrc &= ~0x01f00000;
-        /* bit 22 is EXTCLK0 for PSC0 */
-        clksrc |= (0x3 << 22);
-        au_writel(clksrc, SYS_CLKSRC);
-        au_sync();
+                u32 freq0, clksrc;
+                u32 pin_func;
+
+                /* Select SMBus in CPLD */
+                bcsr->resets &= ~BCSR_RESETS_PCS0MUX;
+
+                pin_func = au_readl(SYS_PINFUNC);
+                au_sync();
+                pin_func &= ~(SYS_PINFUNC_P0A | SYS_PINFUNC_P0B);
+                /* Set GPIOs correctly */
+                pin_func |= 2 << 17;
+                au_writel(pin_func, SYS_PINFUNC);
+                au_sync();
+
+                /* The I2C driver depends on 50 MHz clock */
+                freq0 = au_readl(SYS_FREQCTRL0);
+                au_sync();
+                freq0 &= ~(SYS_FC_FRDIV1_MASK | SYS_FC_FS1 | SYS_FC_FE1);
+                freq0 |= 3 << SYS_FC_FRDIV1_BIT;
+                /* 396 MHz / (3 + 1) * 2 == 49.5 MHz */
+                au_writel(freq0, SYS_FREQCTRL0);
+                au_sync();
+                freq0 |= SYS_FC_FE1;
+                au_writel(freq0, SYS_FREQCTRL0);
+                au_sync();
+
+                clksrc = au_readl(SYS_CLKSRC);
+                au_sync();
+                clksrc &= ~(SYS_CS_CE0 | SYS_CS_DE0 | SYS_CS_ME0_MASK);
+                /* Bit 22 is EXTCLK0 for PSC0 */
+                clksrc |= SYS_CS_MUX_FQ1 << SYS_CS_ME0_BIT;
+                au_writel(clksrc, SYS_CLKSRC);
+                au_sync();
         }
 #endif
 
@@ -116,27 +109,27 @@ void __init board_setup(void)
 #endif
 #endif
 
-        /* The Pb1200 development board uses external MUX for PSC0 to
-        support SMB/SPI. bcsr->resets bit 12: 0=SMB 1=SPI
-        */
+        /*
+         * The Pb1200 development board uses external MUX for PSC0 to
+         * support SMB/SPI. bcsr->resets bit 12: 0=SMB 1=SPI
+         */
 #ifdef CONFIG_I2C_AU1550
-        bcsr->resets &= (~BCSR_RESETS_PCS0MUX);
+        bcsr->resets &= ~BCSR_RESETS_PCS0MUX;
 #endif
         au_sync();
 
 #ifdef CONFIG_MIPS_PB1200
-        printk("AMD Alchemy Pb1200 Board\n");
+        printk(KERN_INFO "AMD Alchemy Pb1200 Board\n");
 #endif
 #ifdef CONFIG_MIPS_DB1200
-        printk("AMD Alchemy Db1200 Board\n");
+        printk(KERN_INFO "AMD Alchemy Db1200 Board\n");
 #endif
 
         /* Setup Pb1200 External Interrupt Controller */
         board_init_irq = _board_init_irq;
 }
 
-int
-board_au1200fb_panel(void)
+int board_au1200fb_panel(void)
 {
         BCSR *bcsr = (BCSR *)BCSR_KSEG1_ADDR;
         int p;
@@ -147,23 +140,23 @@ board_au1200fb_panel(void)
         return p;
 }
 
-int
-board_au1200fb_panel_init(void)
+int board_au1200fb_panel_init(void)
 {
         /* Apply power */
-    BCSR *bcsr = (BCSR *)BCSR_KSEG1_ADDR;
-        bcsr->board |= (BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD | BCSR_BOARD_LCDBL);
-        /*printk("board_au1200fb_panel_init()\n"); */
+        BCSR *bcsr = (BCSR *)BCSR_KSEG1_ADDR;
+
+        bcsr->board |= BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD | BCSR_BOARD_LCDBL;
+        /* printk(KERN_DEBUG "board_au1200fb_panel_init()\n"); */
         return 0;
 }
 
-int
-board_au1200fb_panel_shutdown(void)
+int board_au1200fb_panel_shutdown(void)
 {
         /* Remove power */
-    BCSR *bcsr = (BCSR *)BCSR_KSEG1_ADDR;
-        bcsr->board &= ~(BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD | BCSR_BOARD_LCDBL);
-        /*printk("board_au1200fb_panel_shutdown()\n"); */
+        BCSR *bcsr = (BCSR *)BCSR_KSEG1_ADDR;
+
+        bcsr->board &= ~(BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD |
+                         BCSR_BOARD_LCDBL);
+        /* printk(KERN_DEBUG "board_au1200fb_panel_shutdown()\n"); */
         return 0;
 }
-
diff --git a/arch/mips/au1000/pb1200/init.c b/arch/mips/au1000/pb1200/init.c
index 72af5500660b..09fd63b86062 100644
--- a/arch/mips/au1000/pb1200/init.c
+++ b/arch/mips/au1000/pb1200/init.c
@@ -3,9 +3,8 @@
  * BRIEF MODULE DESCRIPTION
  *      PB1200 board setup
  *
- * Copyright 2001 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- *              ppopov@mvista.com or source@mvista.com
+ * Copyright 2001, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
  *
  *  This program is free software; you can redistribute  it and/or modify it
  *  under  the terms of  the GNU General  Public License as published by the
@@ -45,16 +44,15 @@ void __init prom_init(void)
         unsigned char *memsize_str;
         unsigned long memsize;
 
-        prom_argc = (int) fw_arg0;
-        prom_argv = (char **) fw_arg1;
-        prom_envp = (char **) fw_arg2;
+        prom_argc = (int)fw_arg0;
+        prom_argv = (char **)fw_arg1;
+        prom_envp = (char **)fw_arg2;
 
         prom_init_cmdline();
         memsize_str = prom_getenv("memsize");
-        if (!memsize_str) {
+        if (!memsize_str)
                 memsize = 0x08000000;
-        } else {
-                memsize = simple_strtol(memsize_str, NULL, 0);
-        }
+        else
+                memsize = strict_strtol(memsize_str, 0, NULL);
         add_memory_region(0, memsize, BOOT_MEM_RAM);
 }
diff --git a/arch/mips/au1000/pb1200/irqmap.c b/arch/mips/au1000/pb1200/irqmap.c
index e61eb8e0b76b..2a505ad8715b 100644
--- a/arch/mips/au1000/pb1200/irqmap.c
+++ b/arch/mips/au1000/pb1200/irqmap.c
@@ -39,25 +39,25 @@
 #endif
 
 struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
-        { AU1000_GPIO_7, INTC_INT_LOW_LEVEL, 0 }, // This is exteranl interrupt cascade
+        /* This is external interrupt cascade */
+        { AU1000_GPIO_7, INTC_INT_LOW_LEVEL, 0 },
 };
 
 int __initdata au1xxx_nr_irqs = ARRAY_SIZE(au1xxx_irq_map);
 
 /*
- *      Support for External interrupts on the PbAu1200 Development platform.
+ * Support for External interrupts on the Pb1200 Development platform.
  */
-static volatile int pb1200_cascade_en=0;
+static volatile int pb1200_cascade_en;
 
-irqreturn_t pb1200_cascade_handler( int irq, void *dev_id)
+irqreturn_t pb1200_cascade_handler(int irq, void *dev_id)
 {
         unsigned short bisr = bcsr->int_status;
         int extirq_nr = 0;
 
-        /* Clear all the edge interrupts. This has no effect on level */
+        /* Clear all the edge interrupts. This has no effect on level. */
         bcsr->int_status = bisr;
-        for( ; bisr; bisr &= (bisr-1) )
-        {
+        for ( ; bisr; bisr &= bisr - 1) {
                 extirq_nr = PB1200_INT_BEGIN + __ffs(bisr);
                 /* Ack and dispatch IRQ */
                 do_IRQ(extirq_nr);
@@ -68,26 +68,20 @@ irqreturn_t pb1200_cascade_handler( int irq, void *dev_id)
 
 inline void pb1200_enable_irq(unsigned int irq_nr)
 {
-        bcsr->intset_mask = 1<<(irq_nr - PB1200_INT_BEGIN);
-        bcsr->intset = 1<<(irq_nr - PB1200_INT_BEGIN);
+        bcsr->intset_mask = 1 << (irq_nr - PB1200_INT_BEGIN);
+        bcsr->intset = 1 << (irq_nr - PB1200_INT_BEGIN);
 }
 
 inline void pb1200_disable_irq(unsigned int irq_nr)
 {
-        bcsr->intclr_mask = 1<<(irq_nr - PB1200_INT_BEGIN);
-        bcsr->intclr = 1<<(irq_nr - PB1200_INT_BEGIN);
+        bcsr->intclr_mask = 1 << (irq_nr - PB1200_INT_BEGIN);
+        bcsr->intclr = 1 << (irq_nr - PB1200_INT_BEGIN);
 }
 
 static unsigned int pb1200_setup_cascade(void)
 {
-        int err;
-
-        err = request_irq(AU1000_GPIO_7, &pb1200_cascade_handler,
-                          0, "Pb1200 Cascade", &pb1200_cascade_handler);
-        if (err)
-                return err;
-
-        return 0;
+        return request_irq(AU1000_GPIO_7, &pb1200_cascade_handler,
+                           0, "Pb1200 Cascade", &pb1200_cascade_handler);
 }
 
 static unsigned int pb1200_startup_irq(unsigned int irq)
@@ -132,23 +126,23 @@ void _board_init_irq(void)
         unsigned int irq;
 
 #ifdef CONFIG_MIPS_PB1200
-        /* We have a problem with CPLD rev3. Enable a workaround */
+        /* We have a problem with CPLD rev 3. */
         if (((bcsr->whoami & BCSR_WHOAMI_CPLD) >> 4) <= 3) {
-                printk("\nWARNING!!!\n");
-                printk("\nWARNING!!!\n");
-                printk("\nWARNING!!!\n");
-                printk("\nWARNING!!!\n");
-                printk("\nWARNING!!!\n");
-                printk("\nWARNING!!!\n");
-                printk("Pb1200 must be at CPLD rev4. Please have Pb1200\n");
-                printk("updated to latest revision. This software will not\n");
-                printk("work on anything less than CPLD rev4\n");
-                printk("\nWARNING!!!\n");
-                printk("\nWARNING!!!\n");
-                printk("\nWARNING!!!\n");
-                printk("\nWARNING!!!\n");
-                printk("\nWARNING!!!\n");
-                printk("\nWARNING!!!\n");
+                printk(KERN_ERR "WARNING!!!\n");
+                printk(KERN_ERR "WARNING!!!\n");
+                printk(KERN_ERR "WARNING!!!\n");
+                printk(KERN_ERR "WARNING!!!\n");
+                printk(KERN_ERR "WARNING!!!\n");
+                printk(KERN_ERR "WARNING!!!\n");
+                printk(KERN_ERR "Pb1200 must be at CPLD rev 4. Please have Pb1200\n");
+                printk(KERN_ERR "updated to latest revision. This software will\n");
+                printk(KERN_ERR "not work on anything less than CPLD rev 4.\n");
+                printk(KERN_ERR "WARNING!!!\n");
+                printk(KERN_ERR "WARNING!!!\n");
+                printk(KERN_ERR "WARNING!!!\n");
+                printk(KERN_ERR "WARNING!!!\n");
+                printk(KERN_ERR "WARNING!!!\n");
+                printk(KERN_ERR "WARNING!!!\n");
                 panic("Game over.  Your score is 0.");
         }
 #endif
@@ -161,6 +155,6 @@ void _board_init_irq(void)
 
         /*
          * GPIO_7 can not be hooked here, so it is hooked upon first
-         * request of any source attached to the cascade
+         * request of any source attached to the cascade.
          */
 }