1 files changed, 108 insertions, 0 deletions

diff --git a/arch/mips/alchemy/db1x00/board_setup.c b/arch/mips/alchemy/db1x00/board_setup.c
new file mode 100644
index 000000000000..9e5ccbbfcedd
--- /dev/null
+++ b/arch/mips/alchemy/db1x00/board_setup.c
@@ -0,0 +1,108 @@
+/*
+ *
+ * BRIEF MODULE DESCRIPTION
+ *      Alchemy Db1x00 board setup.
+ *
+ * Copyright 2000, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/init.h>
+
+#include <asm/mach-au1x00/au1000.h>
+#include <asm/mach-db1x00/db1x00.h>
+
+static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR;
+
+void board_reset(void)
+{
+        /* Hit BCSR.SW_RESET[RESET] */
+        bcsr->swreset = 0x0000;
+}
+
+void __init board_setup(void)
+{
+        u32 pin_func = 0;
+
+        /* Not valid for Au1550 */
+#if defined(CONFIG_IRDA) && \
+   (defined(CONFIG_SOC_AU1000) || defined(CONFIG_SOC_AU1100))
+        /* Set IRFIRSEL instead of GPIO15 */
+        pin_func = au_readl(SYS_PINFUNC) | SYS_PF_IRF;
+        au_writel(pin_func, SYS_PINFUNC);
+        /* Power off until the driver is in use */
+        bcsr->resets &= ~BCSR_RESETS_IRDA_MODE_MASK;
+        bcsr->resets |=  BCSR_RESETS_IRDA_MODE_OFF;
+        au_sync();
+#endif
+        bcsr->pcmcia = 0x0000; /* turn off PCMCIA power */
+
+#ifdef CONFIG_MIPS_MIRAGE
+        /* Enable GPIO[31:0] inputs */
+        au_writel(0, SYS_PININPUTEN);
+
+        /* GPIO[20] is output, tristate the other input primary GPIOs */
+        au_writel(~(1 << 20), SYS_TRIOUTCLR);
+
+        /* Set GPIO[210:208] instead of SSI_0 */
+        pin_func = au_readl(SYS_PINFUNC) | SYS_PF_S0;
+
+        /* Set GPIO[215:211] for LEDs */
+        pin_func |= 5 << 2;
+
+        /* Set GPIO[214:213] for more LEDs */
+        pin_func |= 5 << 12;
+
+        /* Set GPIO[207:200] instead of PCMCIA/LCD */
+        pin_func |= SYS_PF_LCD | SYS_PF_PC;
+        au_writel(pin_func, SYS_PINFUNC);
+
+        /*
+         * Enable speaker amplifier.  This should
+         * be part of the audio driver.
+         */
+        au_writel(au_readl(GPIO2_DIR) | 0x200, GPIO2_DIR);
+        au_writel(0x02000200, GPIO2_OUTPUT);
+#endif
+
+        au_sync();
+
+#ifdef CONFIG_MIPS_DB1000
+        printk(KERN_INFO "AMD Alchemy Au1000/Db1000 Board\n");
+#endif
+#ifdef CONFIG_MIPS_DB1500
+        printk(KERN_INFO "AMD Alchemy Au1500/Db1500 Board\n");
+#endif
+#ifdef CONFIG_MIPS_DB1100
+        printk(KERN_INFO "AMD Alchemy Au1100/Db1100 Board\n");
+#endif
+#ifdef CONFIG_MIPS_BOSPORUS
+        printk(KERN_INFO "AMD Alchemy Bosporus Board\n");
+#endif
+#ifdef CONFIG_MIPS_MIRAGE
+        printk(KERN_INFO "AMD Alchemy Mirage Board\n");
+#endif
+#ifdef CONFIG_MIPS_DB1550
+        printk(KERN_INFO "AMD Alchemy Au1550/Db1550 Board\n");
+#endif
+}