1 files changed, 447 insertions, 554 deletions

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 7f826da6e59f..bafd7755380d 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -4,230 +4,120 @@ config MIPS
         # Horrible source of confusion.  Die, die, die ...
         select EMBEDDED
 
-# shouldn't it be per-subarchitecture?
-config ARCH_MAY_HAVE_PC_FDC
-        bool
-        default y
-
 mainmenu "Linux/MIPS Kernel Configuration"
 
 source "init/Kconfig"
 
-#
-# These two indicate any levelof the MIPS32 and MIPS64 architecture
-#
-config CPU_MIPS32
-        bool
-        default y if CPU_MIPS32_R1 || CPU_MIPS32_R2
-
-config CPU_MIPS64
-        bool
-        default y if CPU_MIPS64_R1 || CPU_MIPS64_R2
-
-#
-# These two indicate the revision of the architecture, either 32 bot 64 bit.
-#
-config CPU_MIPSR1
-        bool
-        default y if CPU_MIPS32_R1 || CPU_MIPS64_R1
-
-config CPU_MIPSR2
-        bool
-        default y if CPU_MIPS32_R2 || CPU_MIPS64_R2
-
-config SYS_SUPPORTS_32BIT_KERNEL
-        bool
-config SYS_SUPPORTS_64BIT_KERNEL
-        bool
-config CPU_SUPPORTS_32BIT_KERNEL
-        bool
-config CPU_SUPPORTS_64BIT_KERNEL
-        bool
-
-menu "Kernel type"
-
-choice
-
-        prompt "Kernel code model"
-        help
-          You should only select this option if you have a workload that
-          actually benefits from 64-bit processing or if your machine has
-          large memory.  You will only be presented a single option in this
-          menu if your system does not support both 32-bit and 64-bit kernels.
-
-config 32BIT
-        bool "32-bit kernel"
-        depends on CPU_SUPPORTS_32BIT_KERNEL && SYS_SUPPORTS_32BIT_KERNEL
-        select TRAD_SIGNALS
-        help
-          Select this option if you want to build a 32-bit kernel.
-
-config 64BIT
-        bool "64-bit kernel"
-        depends on CPU_SUPPORTS_64BIT_KERNEL && SYS_SUPPORTS_64BIT_KERNEL
-        help
-          Select this option if you want to build a 64-bit kernel.
-
-endchoice
-
-endmenu
-
 menu "Machine selection"
 
-config MACH_JAZZ
-        bool "Support for the Jazz family of machines"
-        select ARC
-        select ARC32
-        select ARCH_MAY_HAVE_PC_FDC
-        select GENERIC_ISA_DMA
-        select I8259
-        select ISA
-        select SYS_SUPPORTS_32BIT_KERNEL
-        select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
-        help
-         This a family of machines based on the MIPS R4030 chipset which was
-         used by several vendors to build RISC/os and Windows NT workstations.
-         Members include the Acer PICA, MIPS Magnum 4000, MIPS Millenium and
-         Olivetti M700-10 workstations.
+choice
+        prompt "System type"
+        default SGI_IP22
 
-config ACER_PICA_61
-        bool "Support for Acer PICA 1 chipset (EXPERIMENTAL)"
-        depends on MACH_JAZZ && EXPERIMENTAL
+config MIPS_MTX1
+        bool "Support for 4G Systems MTX-1 board"
         select DMA_NONCOHERENT
-        help
-          This is a machine with a R4400 133/150 MHz CPU. To compile a Linux
-          kernel that runs on these, say Y here. For details about Linux on
-          the MIPS architecture, check out the Linux/MIPS FAQ on the WWW at
-          <http://www.linux-mips.org/>.
+        select HW_HAS_PCI
+        select SOC_AU1500
+        select SYS_SUPPORTS_LITTLE_ENDIAN
 
-config MIPS_MAGNUM_4000
-        bool "Support for MIPS Magnum 4000"
-        depends on MACH_JAZZ
+config MIPS_BOSPORUS
+        bool "AMD Alchemy Bosporus board"
+        select SOC_AU1500
         select DMA_NONCOHERENT
-        help
-          This is a machine with a R4000 100 MHz CPU. To compile a Linux
-          kernel that runs on these, say Y here. For details about Linux on
-          the MIPS architecture, check out the Linux/MIPS FAQ on the WWW at
-          <http://www.linux-mips.org/>.
+        select SYS_SUPPORTS_LITTLE_ENDIAN
 
-config OLIVETTI_M700
-        bool "Support for Olivetti M700-10"
-        depends on MACH_JAZZ
+config MIPS_PB1000
+        bool "AMD Alchemy PB1000 board"
+        select SOC_AU1000
         select DMA_NONCOHERENT
-        help
-          This is a machine with a R4000 100 MHz CPU. To compile a Linux
-          kernel that runs on these, say Y here. For details about Linux on
-          the MIPS architecture, check out the Linux/MIPS FAQ on the WWW at
-          <http://www.linux-mips.org/>.
-
-config MACH_VR41XX
-        bool "Support for NEC VR4100 series based machines"
-        select SYS_SUPPORTS_32BIT_KERNEL
-        select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
+        select HW_HAS_PCI
+        select SWAP_IO_SPACE
+        select SYS_SUPPORTS_LITTLE_ENDIAN
 
-config NEC_CMBVR4133
-        bool "Support for NEC CMB-VR4133"
-        depends on MACH_VR41XX
-        select CPU_VR41XX
+config MIPS_PB1100
+        bool "AMD Alchemy PB1100 board"
+        select SOC_AU1100
         select DMA_NONCOHERENT
-        select IRQ_CPU
         select HW_HAS_PCI
+        select SWAP_IO_SPACE
+        select SYS_SUPPORTS_LITTLE_ENDIAN
 
-config ROCKHOPPER
-        bool "Support for Rockhopper baseboard"
-        depends on NEC_CMBVR4133
-        select I8259
-        select HAVE_STD_PC_SERIAL_PORT
+config MIPS_PB1500
+        bool "AMD Alchemy PB1500 board"
+        select SOC_AU1500
+        select DMA_NONCOHERENT
+        select HW_HAS_PCI
+        select SYS_SUPPORTS_LITTLE_ENDIAN
 
-config CASIO_E55
-        bool "Support for CASIO CASSIOPEIA E-10/15/55/65"
-        depends on MACH_VR41XX
-        select CPU_LITTLE_ENDIAN
+config MIPS_PB1550
+        bool "AMD Alchemy PB1550 board"
+        select SOC_AU1550
         select DMA_NONCOHERENT
-        select IRQ_CPU
-        select ISA
+        select HW_HAS_PCI
+        select MIPS_DISABLE_OBSOLETE_IDE
+        select SYS_SUPPORTS_LITTLE_ENDIAN
 
-config IBM_WORKPAD
-        bool "Support for IBM WorkPad z50"
-        depends on MACH_VR41XX
-        select CPU_LITTLE_ENDIAN
+config MIPS_PB1200
+        bool "AMD Alchemy PB1200 board"
+        select SOC_AU1200
         select DMA_NONCOHERENT
-        select IRQ_CPU
-        select ISA
+        select MIPS_DISABLE_OBSOLETE_IDE
+        select SYS_SUPPORTS_LITTLE_ENDIAN
 
-config TANBAC_TB022X
-        bool "Support for TANBAC VR4131 multichip module and TANBAC VR4131DIMM"
-        depends on MACH_VR41XX
-        select CPU_LITTLE_ENDIAN
+config MIPS_DB1000
+        bool "AMD Alchemy DB1000 board"
+        select SOC_AU1000
         select DMA_NONCOHERENT
-        select IRQ_CPU
         select HW_HAS_PCI
-        help
-          The TANBAC VR4131 multichip module(TB0225) and
-          the TANBAC VR4131DIMM(TB0229) are MIPS-based platforms
-          manufactured by TANBAC.
-          Please refer to <http://www.tanbac.co.jp/>
-          about VR4131 multichip module and VR4131DIMM.
-
-config TANBAC_TB0226
-        bool "Support for TANBAC Mbase(TB0226)"
-        depends on TANBAC_TB022X
-        select GPIO_VR41XX
-        help
-          The TANBAC Mbase(TB0226) is a MIPS-based platform manufactured by TANBAC.
-          Please refer to <http://www.tanbac.co.jp/> about Mbase.
-
-config TANBAC_TB0287
-        bool "Support for TANBAC Mini-ITX DIMM base(TB0287)"
-        depends on TANBAC_TB022X
-        help
-          The TANBAC Mini-ITX DIMM base(TB0287) is a MIPS-based platform manufactured by TANBAC.
-          Please refer to <http://www.tanbac.co.jp/> about Mini-ITX DIMM base.
+        select SYS_SUPPORTS_LITTLE_ENDIAN
 
-config VICTOR_MPC30X
-        bool "Support for Victor MP-C303/304"
-        depends on MACH_VR41XX
-        select CPU_LITTLE_ENDIAN
+config MIPS_DB1100
+        bool "AMD Alchemy DB1100 board"
+        select SOC_AU1100
         select DMA_NONCOHERENT
-        select IRQ_CPU
-        select HW_HAS_PCI
+        select SYS_SUPPORTS_LITTLE_ENDIAN
 
-config ZAO_CAPCELLA
-        bool "Support for ZAO Networks Capcella"
-        depends on MACH_VR41XX
-        select CPU_LITTLE_ENDIAN
+config MIPS_DB1500
+        bool "AMD Alchemy DB1500 board"
+        select SOC_AU1500
         select DMA_NONCOHERENT
-        select IRQ_CPU
         select HW_HAS_PCI
+        select MIPS_DISABLE_OBSOLETE_IDE
+        select SYS_SUPPORTS_BIG_ENDIAN
+        select SYS_SUPPORTS_LITTLE_ENDIAN
 
-config PCI_VR41XX
-        bool "Add PCI control unit support of NEC VR4100 series"
-        depends on MACH_VR41XX && HW_HAS_PCI
-        default y
-        select PCI
+config MIPS_DB1550
+        bool "AMD Alchemy DB1550 board"
+        select SOC_AU1550
+        select HW_HAS_PCI
+        select DMA_NONCOHERENT
+        select MIPS_DISABLE_OBSOLETE_IDE
+        select SYS_SUPPORTS_LITTLE_ENDIAN
 
-config VRC4173
-        tristate "Add NEC VRC4173 companion chip support"
-        depends on MACH_VR41XX && PCI_VR41XX
-        ---help---
-          The NEC VRC4173 is a companion chip for NEC VR4122/VR4131.
+config MIPS_DB1200
+        bool "AMD Alchemy DB1200 board"
+        select SOC_AU1200
+        select DMA_COHERENT
+        select MIPS_DISABLE_OBSOLETE_IDE
+        select SYS_SUPPORTS_LITTLE_ENDIAN
 
-config TOSHIBA_JMR3927
-        bool "Support for Toshiba JMR-TX3927 board"
+config MIPS_MIRAGE
+        bool "AMD Alchemy Mirage board"
         select DMA_NONCOHERENT
-        select HW_HAS_PCI
-        select SWAP_IO_SPACE
-        select SYS_SUPPORTS_32BIT_KERNEL
+        select SOC_AU1500
+        select SYS_SUPPORTS_LITTLE_ENDIAN
 
 config MIPS_COBALT
         bool "Support for Cobalt Server"
-        depends on EXPERIMENTAL
         select DMA_NONCOHERENT
         select HW_HAS_PCI
         select I8259
         select IRQ_CPU
+        select MIPS_GT64111
         select SYS_SUPPORTS_32BIT_KERNEL
         select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
+        select SYS_SUPPORTS_LITTLE_ENDIAN
 
 config MACH_DECSTATION
         bool "Support for DECstations"
@@ -237,7 +127,8 @@ config MACH_DECSTATION
         select IRQ_CPU
         select SYS_SUPPORTS_32BIT_KERNEL
         select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
-        ---help---
+        select SYS_SUPPORTS_LITTLE_ENDIAN
+        help
           This enables support for DEC's MIPS based workstations.  For details
           see the Linux/MIPS FAQ on <http://www.linux-mips.org/> and the
           DECstation porting pages on <http://decstation.unix-ag.org/>.
@@ -256,11 +147,11 @@ config MIPS_EV64120
         bool "Support for Galileo EV64120 Evaluation board (EXPERIMENTAL)"
         depends on EXPERIMENTAL
         select DMA_NONCOHERENT
-        select IRQ_CPU
         select HW_HAS_PCI
         select MIPS_GT64120
         select SYS_SUPPORTS_32BIT_KERNEL
         select SYS_SUPPORTS_64BIT_KERNEL
+        select SYS_SUPPORTS_BIG_ENDIAN
         help
           This is an evaluation board based on the Galileo GT-64120
           single-chip system controller that contains a MIPS R5000 compatible
@@ -268,10 +159,6 @@ config MIPS_EV64120
           <http://www.marvell.com/>.  Say Y here if you wish to build a
           kernel for this platform.
 
-config EVB_PCI1
-        bool "Enable Second PCI (PCI1)"
-        depends on MIPS_EV64120
-
 config MIPS_EV96100
         bool "Support for Galileo EV96100 Evaluation board (EXPERIMENTAL)"
         depends on EXPERIMENTAL
@@ -282,7 +169,8 @@ config MIPS_EV96100
         select RM7000_CPU_SCACHE
         select SWAP_IO_SPACE
         select SYS_SUPPORTS_32BIT_KERNEL
-        select SYS_SUPPORTS_64BIT_KERNEL
+        select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
+        select SYS_SUPPORTS_BIG_ENDIAN
         help
           This is an evaluation board based on the Galileo GT-96100 LAN/WAN
           communications controllers containing a MIPS R5000 compatible core
@@ -293,8 +181,10 @@ config MIPS_IVR
         bool "Support for Globespan IVR board"
         select DMA_NONCOHERENT
         select HW_HAS_PCI
+        select ITE_BOARD_GEN
         select SYS_SUPPORTS_32BIT_KERNEL
         select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
+        select SYS_SUPPORTS_LITTLE_ENDIAN
         help
           This is an evaluation board built by Globespan to showcase thir
           iVR (Internet Video Recorder) design. It utilizes a QED RM5231
@@ -302,37 +192,14 @@ config MIPS_IVR
           located at <http://www.globespan.net/>. Say Y here if you wish to
           build a kernel for this platform.
 
-config LASAT
-        bool "Support for LASAT Networks platforms"
-        select DMA_NONCOHERENT
-        select HW_HAS_PCI
-        select MIPS_GT64120
-        select R5000_CPU_SCACHE
-        select SYS_SUPPORTS_32BIT_KERNEL
-        select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
-
-config PICVUE
-        tristate "PICVUE LCD display driver"
-        depends on LASAT
-
-config PICVUE_PROC
-        tristate "PICVUE LCD display driver /proc interface"
-        depends on PICVUE
-
-config DS1603
-        bool "DS1603 RTC driver"
-        depends on LASAT
-
-config LASAT_SYSCTL
-        bool "LASAT sysctl interface"
-        depends on LASAT
-
 config MIPS_ITE8172
         bool "Support for ITE 8172G board"
         select DMA_NONCOHERENT
         select HW_HAS_PCI
+        select ITE_BOARD_GEN
         select SYS_SUPPORTS_32BIT_KERNEL
         select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
+        select SYS_SUPPORTS_LITTLE_ENDIAN
         help
           Ths is an evaluation board made by ITE <http://www.ite.com.tw/>
           with ATX form factor that utilizes a MIPS R5000 to work with its
@@ -340,25 +207,49 @@ config MIPS_ITE8172
           either a NEC Vr5432 or QED RM5231. Say Y here if you wish to build
           a kernel for this platform.
 
-config IT8172_REVC
-        bool "Support for older IT8172 (Rev C)"
-        depends on MIPS_ITE8172
+config MACH_JAZZ
+        bool "Support for the Jazz family of machines"
+        select ARC
+        select ARC32
+        select ARCH_MAY_HAVE_PC_FDC
+        select GENERIC_ISA_DMA
+        select I8259
+        select ISA
+        select SYS_SUPPORTS_32BIT_KERNEL
+        select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
         help
-          Say Y here to support the older, Revision C version of the Integrated
-          Technology Express, Inc. ITE8172 SBC.  Vendor page at
-          <http://www.ite.com.tw/ia/brief_it8172bsp.htm>; picture of the
-          board at <http://www.mvista.com/partners/semiconductor/ite.html>.
+         This a family of machines based on the MIPS R4030 chipset which was
+         used by several vendors to build RISC/os and Windows NT workstations.
+         Members include the Acer PICA, MIPS Magnum 4000, MIPS Millenium and
+         Olivetti M700-10 workstations.
+
+config LASAT
+        bool "Support for LASAT Networks platforms"
+        select DMA_NONCOHERENT
+        select HW_HAS_PCI
+        select MIPS_GT64120
+        select MIPS_NILE4
+        select R5000_CPU_SCACHE
+        select SYS_SUPPORTS_32BIT_KERNEL
+        select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
+        select SYS_SUPPORTS_LITTLE_ENDIAN
 
 config MIPS_ATLAS
         bool "Support for MIPS Atlas board"
         select BOOT_ELF32
         select DMA_NONCOHERENT
+        select IRQ_CPU
         select HW_HAS_PCI
+        select MIPS_BOARDS_GEN
+        select MIPS_BONITO64
         select MIPS_GT64120
+        select MIPS_MSC
         select RM7000_CPU_SCACHE
         select SWAP_IO_SPACE
         select SYS_SUPPORTS_32BIT_KERNEL
         select SYS_SUPPORTS_64BIT_KERNEL
+        select SYS_SUPPORTS_BIG_ENDIAN
+        select SYS_SUPPORTS_LITTLE_ENDIAN
         help
           This enables support for the MIPS Technologies Atlas evaluation
           board.
@@ -373,10 +264,15 @@ config MIPS_MALTA
         select GENERIC_ISA_DMA
         select HW_HAS_PCI
         select I8259
+        select MIPS_BOARDS_GEN
+        select MIPS_BONITO64
         select MIPS_GT64120
+        select MIPS_MSC
         select SWAP_IO_SPACE
         select SYS_SUPPORTS_32BIT_KERNEL
         select SYS_SUPPORTS_64BIT_KERNEL
+        select SYS_SUPPORTS_BIG_ENDIAN
+        select SYS_SUPPORTS_LITTLE_ENDIAN
         help
           This enables support for the MIPS Technologies Malta evaluation
           board.
@@ -386,53 +282,57 @@ config MIPS_SEAD
         depends on EXPERIMENTAL
         select IRQ_CPU
         select DMA_NONCOHERENT
+        select MIPS_BOARDS_GEN
         select SYS_SUPPORTS_32BIT_KERNEL
-        select SYS_SUPPORTS_64BIT_KERNEL
+        select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
+        select SYS_SUPPORTS_BIG_ENDIAN
+        select SYS_SUPPORTS_LITTLE_ENDIAN
         help
           This enables support for the MIPS Technologies SEAD evaluation
           board.
 
-config MOMENCO_OCELOT
-        bool "Support for Momentum Ocelot board"
+config MIPS_SIM
+        bool 'Support for MIPS simulator (MIPSsim)'
         select DMA_NONCOHERENT
-        select HW_HAS_PCI
         select IRQ_CPU
-        select IRQ_CPU_RM7K
-        select MIPS_GT64120
-        select RM7000_CPU_SCACHE
-        select SWAP_IO_SPACE
         select SYS_SUPPORTS_32BIT_KERNEL
-        select SYS_SUPPORTS_64BIT_KERNEL
+        select SYS_SUPPORTS_BIG_ENDIAN
+        select SYS_SUPPORTS_LITTLE_ENDIAN
         help
-          The Ocelot is a MIPS-based Single Board Computer (SBC) made by
-          Momentum Computer <http://www.momenco.com/>.
+          This option enables support for MIPS Technologies MIPSsim software
+          emulator.
 
-config MOMENCO_OCELOT_G
-        bool "Support for Momentum Ocelot-G board"
+config MOMENCO_JAGUAR_ATX
+        bool "Support for Momentum Jaguar board"
+        select BOOT_ELF32
         select DMA_NONCOHERENT
         select HW_HAS_PCI
         select IRQ_CPU
         select IRQ_CPU_RM7K
+        select IRQ_MV64340
+        select LIMITED_DMA
         select PCI_MARVELL
         select RM7000_CPU_SCACHE
         select SWAP_IO_SPACE
         select SYS_SUPPORTS_32BIT_KERNEL
         select SYS_SUPPORTS_64BIT_KERNEL
+        select SYS_SUPPORTS_BIG_ENDIAN
         help
-          The Ocelot is a MIPS-based Single Board Computer (SBC) made by
+          The Jaguar ATX is a MIPS-based Single Board Computer (SBC) made by
           Momentum Computer <http://www.momenco.com/>.
 
-config MOMENCO_OCELOT_C
-        bool "Support for Momentum Ocelot-C board"
+config MOMENCO_OCELOT
+        bool "Support for Momentum Ocelot board"
         select DMA_NONCOHERENT
         select HW_HAS_PCI
         select IRQ_CPU
-        select IRQ_MV64340
-        select PCI_MARVELL
+        select IRQ_CPU_RM7K
+        select MIPS_GT64120
         select RM7000_CPU_SCACHE
         select SWAP_IO_SPACE
         select SYS_SUPPORTS_32BIT_KERNEL
         select SYS_SUPPORTS_64BIT_KERNEL
+        select SYS_SUPPORTS_BIG_ENDIAN
         help
           The Ocelot is a MIPS-based Single Board Computer (SBC) made by
           Momentum Computer <http://www.momenco.com/>.
@@ -450,63 +350,48 @@ config MOMENCO_OCELOT_3
         select SWAP_IO_SPACE
         select SYS_SUPPORTS_32BIT_KERNEL
         select SYS_SUPPORTS_64BIT_KERNEL
+        select SYS_SUPPORTS_BIG_ENDIAN
         help
           The Ocelot-3 is based off Discovery III System Controller and
           PMC-Sierra Rm79000 core.
 
-config MIPS_SIM
-        bool 'Support for MIPS simulator (MIPSsim)'
-        select DMA_NONCOHERENT
-        select IRQ_CPU
-        select SYS_SUPPORTS_32BIT_KERNEL
-        select SYS_SUPPORTS_BIG_ENDIAN
-        select SYS_SUPPORTS_LITTLE_ENDIAN
-        help
-          This option enables support for MIPS Technologies MIPSsim software
-          emulator.
-
-config MOMENCO_JAGUAR_ATX
-        bool "Support for Momentum Jaguar board"
-        select BOOT_ELF32
+config MOMENCO_OCELOT_C
+        bool "Support for Momentum Ocelot-C board"
         select DMA_NONCOHERENT
         select HW_HAS_PCI
         select IRQ_CPU
-        select IRQ_CPU_RM7K
         select IRQ_MV64340
-        select LIMITED_DMA
         select PCI_MARVELL
         select RM7000_CPU_SCACHE
         select SWAP_IO_SPACE
         select SYS_SUPPORTS_32BIT_KERNEL
         select SYS_SUPPORTS_64BIT_KERNEL
+        select SYS_SUPPORTS_BIG_ENDIAN
         help
-          The Jaguar ATX is a MIPS-based Single Board Computer (SBC) made by
+          The Ocelot is a MIPS-based Single Board Computer (SBC) made by
           Momentum Computer <http://www.momenco.com/>.
 
-config JAGUAR_DMALOW
-        bool "Low DMA Mode"
-        depends on MOMENCO_JAGUAR_ATX
-        help
-          Select to Y if jump JP5 is set on your board, N otherwise.  Normally
-          the jumper is set, so if you feel unsafe, just say Y.
-
-config PMC_YOSEMITE
-        bool "Support for PMC-Sierra Yosemite eval board"
-        select DMA_COHERENT
+config MOMENCO_OCELOT_G
+        bool "Support for Momentum Ocelot-G board"
+        select DMA_NONCOHERENT
         select HW_HAS_PCI
         select IRQ_CPU
         select IRQ_CPU_RM7K
-        select IRQ_CPU_RM9K
+        select PCI_MARVELL
+        select RM7000_CPU_SCACHE
         select SWAP_IO_SPACE
         select SYS_SUPPORTS_32BIT_KERNEL
         select SYS_SUPPORTS_64BIT_KERNEL
+        select SYS_SUPPORTS_BIG_ENDIAN
         help
-          Yosemite is an evaluation board for the RM9000x2 processor
-          manufactured by PMC-Sierra
+          The Ocelot is a MIPS-based Single Board Computer (SBC) made by
+          Momentum Computer <http://www.momenco.com/>.
 
-config HYPERTRANSPORT
-        bool "Hypertransport Support for PMC-Sierra Yosemite"
-        depends on PMC_YOSEMITE
+config MIPS_XXS1500
+        bool "Support for MyCable XXS1500 board"
+        select DMA_NONCOHERENT
+        select SOC_AU1500
+        select SYS_SUPPORTS_LITTLE_ENDIAN
 
 config PNX8550_V2PCI
         bool "Support for Philips PNX8550 based Viper2-PCI board"
@@ -521,6 +406,7 @@ config PNX8550_JBS
 config DDB5074
         bool "Support for NEC DDB Vrc-5074 (EXPERIMENTAL)"
         depends on EXPERIMENTAL
+        select DDB5XXX_COMMON
         select DMA_NONCOHERENT
         select HAVE_STD_PC_SERIAL_PORT
         select HW_HAS_PCI
@@ -528,13 +414,15 @@ config DDB5074
         select I8259
         select ISA
         select SYS_SUPPORTS_32BIT_KERNEL
-        select SYS_SUPPORTS_64BIT_KERNEL
+        select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
+        select SYS_SUPPORTS_LITTLE_ENDIAN
         help
           This enables support for the VR5000-based NEC DDB Vrc-5074
           evaluation board.
 
 config DDB5476
         bool "Support for NEC DDB Vrc-5476"
+        select DDB5XXX_COMMON
         select DMA_NONCOHERENT
         select HAVE_STD_PC_SERIAL_PORT
         select HW_HAS_PCI
@@ -543,6 +431,7 @@ config DDB5476
         select ISA
         select SYS_SUPPORTS_32BIT_KERNEL
         select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
+        select SYS_SUPPORTS_LITTLE_ENDIAN
         help
           This enables support for the R5432-based NEC DDB Vrc-5476
           evaluation board.
@@ -553,12 +442,14 @@ config DDB5476
 
 config DDB5477
         bool "Support for NEC DDB Vrc-5477"
+        select DDB5XXX_COMMON
         select DMA_NONCOHERENT
         select HW_HAS_PCI
         select I8259
         select IRQ_CPU
         select SYS_SUPPORTS_32BIT_KERNEL
         select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
+        select SYS_SUPPORTS_LITTLE_ENDIAN
         help
           This enables support for the R5432-based NEC DDB Vrc-5477,
           or Rockhopper/SolutionGear boards with R5432/R5500 CPUs.
@@ -566,10 +457,26 @@ config DDB5477
           Features : kernel debugging, serial terminal, NFS root fs, on-board
           ether port USB, AC97, PCI, etc.
 
-config DDB5477_BUS_FREQUENCY
-        int "bus frequency (in kHZ, 0 for auto-detect)"
-        depends on DDB5477
-        default 0
+config MACH_VR41XX
+        bool "Support for NEC VR4100 series based machines"
+        select SYS_SUPPORTS_32BIT_KERNEL
+        select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
+
+config PMC_YOSEMITE
+        bool "Support for PMC-Sierra Yosemite eval board"
+        select DMA_COHERENT
+        select HW_HAS_PCI
+        select IRQ_CPU
+        select IRQ_CPU_RM7K
+        select IRQ_CPU_RM9K
+        select SWAP_IO_SPACE
+        select SYS_SUPPORTS_32BIT_KERNEL
+        select SYS_SUPPORTS_64BIT_KERNEL
+        select SYS_SUPPORTS_BIG_ENDIAN
+        select SYS_SUPPORTS_HIGHMEM
+        help
+          Yosemite is an evaluation board for the RM9000x2 processor
+          manufactured by PMC-Sierra.
 
 config QEMU
         bool "Support for Qemu"
@@ -581,14 +488,13 @@ config QEMU
         select SWAP_IO_SPACE
         select SYS_SUPPORTS_32BIT_KERNEL
         select SYS_SUPPORTS_BIG_ENDIAN
-        select SYS_SUPPORTS_HIGHMEM
         help
-         Qemu is a software emulator which among other architectures also
-         can simulate a MIPS32 4Kc system.  This patch adds support for the
-         system architecture that currently is being simulated by Qemu.  It
-         will eventually be removed again when Qemu has the capability to
-         simulate actual MIPS hardware platforms.  More information on Qemu
-         can be found at http://www.linux-mips.org/wiki/Qemu.
+          Qemu is a software emulator which among other architectures also
+          can simulate a MIPS32 4Kc system.  This patch adds support for the
+          system architecture that currently is being simulated by Qemu.  It
+          will eventually be removed again when Qemu has the capability to
+          simulate actual MIPS hardware platforms.  More information on Qemu
+          can be found at http://www.linux-mips.org/wiki/Qemu.
 
 config SGI_IP22
         bool "Support for SGI IP22 (Indy/Indigo2)"
@@ -596,11 +502,13 @@ config SGI_IP22
         select ARC32
         select BOOT_ELF32
         select DMA_NONCOHERENT
+        select HW_HAS_EISA
         select IP22_CPU_SCACHE
         select IRQ_CPU
         select SWAP_IO_SPACE
         select SYS_SUPPORTS_32BIT_KERNEL
         select SYS_SUPPORTS_64BIT_KERNEL
+        select SYS_SUPPORTS_BIG_ENDIAN
         help
           This are the SGI Indy, Challenge S and Indigo2, as well as certain
           OEM variants like the Tandem CMN B006S. To compile a Linux kernel
@@ -610,70 +518,17 @@ config SGI_IP27
         bool "Support for SGI IP27 (Origin200/2000)"
         select ARC
         select ARC64
+        select BOOT_ELF64
         select DMA_IP27
         select HW_HAS_PCI
         select PCI_DOMAINS
         select SYS_SUPPORTS_64BIT_KERNEL
+        select SYS_SUPPORTS_BIG_ENDIAN
         help
           This are the SGI Origin 200, Origin 2000 and Onyx 2 Graphics
           workstations.  To compile a Linux kernel that runs on these, say Y
           here.
 
-#config SGI_SN0_XXL
-#       bool "IP27 XXL"
-#       depends on SGI_IP27
-#         This options adds support for userspace processes upto 16TB size.
-#         Normally the limit is just .5TB.
-
-config SGI_SN0_N_MODE
-        bool "IP27 N-Mode"
-        depends on SGI_IP27
-        help
-          The nodes of Origin 200, Origin 2000 and Onyx 2 systems can be
-          configured in either N-Modes which allows for more nodes or M-Mode
-          which allows for more memory.  Your system is most probably
-          running in M-Mode, so you should say N here.
-
-config ARCH_DISCONTIGMEM_ENABLE
-        bool
-        default y if SGI_IP27
-        help
-          Say Y to upport efficient handling of discontiguous physical memory,
-          for architectures which are either NUMA (Non-Uniform Memory Access)
-          or have huge holes in the physical address space for other reasons.
-          See <file:Documentation/vm/numa> for more.
-
-config NUMA
-        bool "NUMA Support"
-        depends on SGI_IP27
-        help
-          Say Y to compile the kernel to support NUMA (Non-Uniform Memory
-          Access).  This option is for configuring high-end multiprocessor
-          server machines.  If in doubt, say N.
-
-config MAPPED_KERNEL
-        bool "Mapped kernel support"
-        depends on SGI_IP27
-        help
-          Change the way a Linux kernel is loaded into memory on a MIPS64
-          machine.  This is required in order to support text replication and
-          NUMA.  If you need to understand it, read the source code.
-
-config REPLICATE_KTEXT
-        bool "Kernel text replication support"
-        depends on SGI_IP27
-        help
-          Say Y here to enable replicating the kernel text across multiple
-          nodes in a NUMA cluster.  This trades memory for speed.
-
-config REPLICATE_EXHANDLERS
-        bool "Exception handler replication support"
-        depends on SGI_IP27
-        help
-          Say Y here to enable replicating the kernel exception handlers
-          across multiple nodes in a NUMA cluster. This trades memory for
-          speed.
-
 config SGI_IP32
         bool "Support for SGI IP32 (O2) (EXPERIMENTAL)"
         depends on EXPERIMENTAL
@@ -683,162 +538,96 @@ config SGI_IP32
         select OWN_DMA
         select DMA_IP32
         select DMA_NONCOHERENT
-        select HAS_TXX9_SERIAL
         select HW_HAS_PCI
         select R5000_CPU_SCACHE
         select RM7000_CPU_SCACHE
         select SYS_SUPPORTS_64BIT_KERNEL
+        select SYS_SUPPORTS_BIG_ENDIAN
         help
           If you want this kernel to run on SGI O2 workstation, say Y here.
 
-config SOC_AU1200
-        bool
-        select SOC_AU1X00
-
-config SOC_AU1X00
-        bool "Support for AMD/Alchemy Au1X00 SOCs"
-        select SYS_SUPPORTS_32BIT_KERNEL
-
-choice
-        prompt "Au1X00 SOC Type"
-        depends on SOC_AU1X00
-        help
-          Say Y here to enable support for one of three AMD/Alchemy
-          SOCs. For additional documentation see www.amd.com.
-
-config SOC_AU1000
-        bool "SOC_AU1000"
-config SOC_AU1100
-        bool "SOC_AU1100"
-config SOC_AU1500
-        bool "SOC_AU1500"
-config SOC_AU1550
-        bool "SOC_AU1550"
-
-config TOSHIBA_RBTX4938
-        bool "Support for Toshiba RBTX4938 board"
-        select HAVE_STD_PC_SERIAL_PORT
-        select DMA_NONCOHERENT
-        select GENERIC_ISA_DMA
-        select HAS_TXX9_SERIAL
-        select HW_HAS_PCI
-        select I8259
-        select ISA
+config SIBYTE_SWARM
+        bool "Support for Sibyte BCM91250A-SWARM"
+        select BOOT_ELF32
+        select DMA_COHERENT
+        select SIBYTE_SB1250
         select SWAP_IO_SPACE
-        select SYS_SUPPORTS_32BIT_KERNEL
-        select SYS_SUPPORTS_LITTLE_ENDIAN
         select SYS_SUPPORTS_BIG_ENDIAN
-        select TOSHIBA_BOARDS
-        help
-          This Toshiba board is based on the TX4938 processor. Say Y here to
-          support this machine type
-
-endchoice
-
-choice
-        prompt "AMD/Alchemy Au1x00 board support"
-        depends on SOC_AU1X00
-        help
-          These are evaluation boards built by AMD/Alchemy to
-          showcase their Au1X00 Internet Edge Processors. The SOC design
-          is based on the MIPS32 architecture running at 266/400/500MHz
-          with many integrated peripherals. Further information can be
-          found at their website, <http://www.amd.com/>. Say Y here if you
-          wish to build a kernel for this platform.
+        select SYS_SUPPORTS_HIGHMEM
+        select SYS_SUPPORTS_LITTLE_ENDIAN
 
-config MIPS_PB1000
-        bool "PB1000 board"
-        depends on SOC_AU1000
-        select DMA_NONCOHERENT
-        select HW_HAS_PCI
+config SIBYTE_SENTOSA
+        bool "Support for Sibyte BCM91250E-Sentosa"
+        depends on EXPERIMENTAL
+        select BOOT_ELF32
+        select DMA_COHERENT
+        select SIBYTE_SB1250
         select SWAP_IO_SPACE
+        select SYS_SUPPORTS_BIG_ENDIAN
+        select SYS_SUPPORTS_LITTLE_ENDIAN
 
-config MIPS_PB1100
-        bool "PB1100 board"
-        depends on SOC_AU1100
-        select DMA_NONCOHERENT
-        select HW_HAS_PCI
+config SIBYTE_RHONE
+        bool "Support for Sibyte BCM91125E-Rhone"
+        depends on EXPERIMENTAL
+        select BOOT_ELF32
+        select DMA_COHERENT
+        select SIBYTE_BCM1125H
         select SWAP_IO_SPACE
+        select SYS_SUPPORTS_BIG_ENDIAN
+        select SYS_SUPPORTS_LITTLE_ENDIAN
 
-config MIPS_PB1500
-        bool "PB1500 board"
-        depends on SOC_AU1500
-        select DMA_NONCOHERENT
-        select HW_HAS_PCI
-
-config MIPS_PB1550
-        bool "PB1550 board"
-        depends on SOC_AU1550
+config SIBYTE_CARMEL
+        bool "Support for Sibyte BCM91120x-Carmel"
+        depends on EXPERIMENTAL
+        select BOOT_ELF32
         select DMA_COHERENT
-        select HW_HAS_PCI
-        select MIPS_DISABLE_OBSOLETE_IDE
+        select SIBYTE_BCM1120
+        select SWAP_IO_SPACE
+        select SYS_SUPPORTS_BIG_ENDIAN
+        select SYS_SUPPORTS_LITTLE_ENDIAN
 
-config MIPS_PB1200
-        bool "AMD Alchemy PB1200 board"
-        select SOC_AU1200
-        select DMA_NONCOHERENT
-        select MIPS_DISABLE_OBSOLETE_IDE
+config SIBYTE_PTSWARM
+        bool "Support for Sibyte BCM91250PT-PTSWARM"
+        depends on EXPERIMENTAL
+        select BOOT_ELF32
+        select DMA_COHERENT
+        select SIBYTE_SB1250
+        select SWAP_IO_SPACE
         select SYS_SUPPORTS_BIG_ENDIAN
         select SYS_SUPPORTS_HIGHMEM
-        select SYS_SUPPORTS_HIGHMEM
-        select SYS_SUPPORTS_HIGHMEM
-        select SYS_SUPPORTS_HIGHMEM
         select SYS_SUPPORTS_LITTLE_ENDIAN
 
-config MIPS_DB1000
-        bool "DB1000 board"
-        depends on SOC_AU1000
-        select DMA_NONCOHERENT
-        select HW_HAS_PCI
-
-config MIPS_DB1100
-        bool "DB1100 board"
-        depends on SOC_AU1100
-        select DMA_NONCOHERENT
-
-config MIPS_DB1500
-        bool "DB1500 board"
-        depends on SOC_AU1500
-        select DMA_NONCOHERENT
-        select HW_HAS_PCI
-        select MIPS_DISABLE_OBSOLETE_IDE
-
-config MIPS_DB1550
-        bool "DB1550 board"
-        depends on SOC_AU1550
-        select HW_HAS_PCI
-        select DMA_NONCOHERENT
-        select MIPS_DISABLE_OBSOLETE_IDE
-
-config MIPS_BOSPORUS
-        bool "Bosporus board"
-        depends on SOC_AU1500
-        select DMA_NONCOHERENT
-
-config MIPS_DB1200
-        bool "AMD Alchemy DB1200 board"
-        select SOC_AU1200
+config SIBYTE_LITTLESUR
+        bool "Support for Sibyte BCM91250C2-LittleSur"
+        depends on EXPERIMENTAL
+        select BOOT_ELF32
         select DMA_COHERENT
-        select MIPS_DISABLE_OBSOLETE_IDE
+        select SIBYTE_SB1250
+        select SWAP_IO_SPACE
+        select SYS_SUPPORTS_BIG_ENDIAN
+        select SYS_SUPPORTS_HIGHMEM
         select SYS_SUPPORTS_LITTLE_ENDIAN
 
-config MIPS_MIRAGE
-        bool "Mirage board"
-        depends on SOC_AU1500
-        select DMA_NONCOHERENT
-
-config MIPS_XXS1500
-        bool "MyCable XXS1500 board"
-        depends on SOC_AU1500
-        select DMA_NONCOHERENT
-
-config MIPS_MTX1
-        bool "4G Systems MTX-1 board"
-        depends on SOC_AU1500
-        select HW_HAS_PCI
-        select DMA_NONCOHERENT
+config SIBYTE_CRHINE
+        bool "Support for Sibyte BCM91120C-CRhine"
+        depends on EXPERIMENTAL
+        select BOOT_ELF32
+        select DMA_COHERENT
+        select SIBYTE_BCM1120
+        select SWAP_IO_SPACE
+        select SYS_SUPPORTS_BIG_ENDIAN
+        select SYS_SUPPORTS_LITTLE_ENDIAN
 
-endchoice
+config SIBYTE_CRHONE
+        bool "Support for Sibyte BCM91125C-CRhone"
+        depends on EXPERIMENTAL
+        select BOOT_ELF32
+        select DMA_COHERENT
+        select SIBYTE_BCM1125
+        select SWAP_IO_SPACE
+        select SYS_SUPPORTS_BIG_ENDIAN
+        select SYS_SUPPORTS_HIGHMEM
+        select SYS_SUPPORTS_LITTLE_ENDIAN
 
 config SNI_RM200_PCI
         bool "Support for SNI RM200 PCI"
@@ -849,18 +638,31 @@ config SNI_RM200_PCI
         select DMA_NONCOHERENT
         select GENERIC_ISA_DMA
         select HAVE_STD_PC_SERIAL_PORT
+        select HW_HAS_EISA
         select HW_HAS_PCI
         select I8259
         select ISA
         select SYS_SUPPORTS_32BIT_KERNEL
         select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
+        select SYS_SUPPORTS_BIG_ENDIAN if EXPERIMENTAL
         select SYS_SUPPORTS_HIGHMEM
+        select SYS_SUPPORTS_LITTLE_ENDIAN
         help
           The SNI RM200 PCI was a MIPS-based platform manufactured by Siemens
           Nixdorf Informationssysteme (SNI), parent company of Pyramid
           Technology and now in turn merged with Fujitsu.  Say Y here to
           support this machine type.
 
+config TOSHIBA_JMR3927
+        bool "Support for Toshiba JMR-TX3927 board"
+        select DMA_NONCOHERENT
+        select HW_HAS_PCI
+        select MIPS_TX3927
+        select SWAP_IO_SPACE
+        select SYS_SUPPORTS_32BIT_KERNEL
+        select SYS_SUPPORTS_BIG_ENDIAN
+        select TOSHIBA_BOARDS
+
 config TOSHIBA_RBTX4927
         bool "Support for Toshiba TBTX49[23]7 board"
         select DMA_NONCOHERENT
@@ -871,26 +673,54 @@ config TOSHIBA_RBTX4927
         select SWAP_IO_SPACE
         select SYS_SUPPORTS_32BIT_KERNEL
         select SYS_SUPPORTS_64BIT_KERNEL
+        select SYS_SUPPORTS_BIG_ENDIAN
+        select TOSHIBA_BOARDS
         help
           This Toshiba board is based on the TX4927 processor. Say Y here to
           support this machine type
 
-config TOSHIBA_FPCIB0
-        bool "FPCIB0 Backplane Support"
-        depends on TOSHIBA_RBTX4927
+config TOSHIBA_RBTX4938
+        bool "Support for Toshiba RBTX4938 board"
+        select HAVE_STD_PC_SERIAL_PORT
+        select DMA_NONCOHERENT
+        select GENERIC_ISA_DMA
+        select HAS_TXX9_SERIAL
+        select HW_HAS_PCI
+        select I8259
+        select ISA
+        select SWAP_IO_SPACE
+        select SYS_SUPPORTS_32BIT_KERNEL
+        select SYS_SUPPORTS_LITTLE_ENDIAN
+        select SYS_SUPPORTS_BIG_ENDIAN
+        select TOSHIBA_BOARDS
+        help
+          This Toshiba board is based on the TX4938 processor. Say Y here to
+          support this machine type
 
+endchoice
+
+source "arch/mips/ddb5xxx/Kconfig"
+source "arch/mips/gt64120/ev64120/Kconfig"
+source "arch/mips/jazz/Kconfig"
+source "arch/mips/ite-boards/Kconfig"
+source "arch/mips/lasat/Kconfig"
+source "arch/mips/momentum/Kconfig"
+source "arch/mips/pmc-sierra/Kconfig"
 source "arch/mips/sgi-ip27/Kconfig"
 source "arch/mips/sibyte/Kconfig"
+source "arch/mips/tx4927/Kconfig"
 source "arch/mips/tx4938/Kconfig"
+source "arch/mips/vr41xx/Kconfig"
 source "arch/mips/philips/pnx8550/common/Kconfig"
 
+endmenu
+
 config RWSEM_GENERIC_SPINLOCK
         bool
         default y
 
 config RWSEM_XCHGADD_ALGORITHM
         bool
-        select HAS_TXX9_SERIAL
 
 config GENERIC_CALIBRATE_DELAY
         bool
@@ -901,8 +731,6 @@ config GENERIC_CALIBRATE_DELAY
 #
 config ARC
         bool
-        depends on SNI_RM200_PCI || SGI_IP32 || SGI_IP27 || SGI_IP22 || MIPS_MAGNUM_4000 || OLIVETTI_M700 || ACER_PICA_61
-        default y
 
 config ARCH_MAY_HAVE_PC_FDC
         bool
@@ -924,20 +752,17 @@ config DMA_NONCOHERENT
 config DMA_NEED_PCI_MAP_STATE
         bool
 
+config OWN_DMA
+        bool
+
 config EARLY_PRINTK
         bool
-        depends on MACH_DECSTATION
-        default y
 
 config GENERIC_ISA_DMA
         bool
-        depends on SNI_RM200_PCI || MIPS_MAGNUM_4000 || OLIVETTI_M700 || ACER_PICA_61 || MIPS_MALTA
-        default y
 
 config I8259
         bool
-        depends on SNI_RM200_PCI || DDB5477 || DDB5476 || DDB5074 || MACH_JAZZ || MIPS_MALTA || MIPS_COBALT
-        default y
 
 config LIMITED_DMA
         bool
@@ -946,30 +771,46 @@ config LIMITED_DMA
 
 config MIPS_BONITO64
         bool
-        depends on MIPS_ATLAS || MIPS_MALTA
-        default y
 
 config MIPS_MSC
         bool
-        depends on MIPS_ATLAS || MIPS_MALTA
-        default y
 
 config MIPS_NILE4
         bool
-        depends on LASAT
-        default y
 
 config MIPS_DISABLE_OBSOLETE_IDE
         bool
 
-config CPU_LITTLE_ENDIAN
-        bool "Generate little endian code"
-        default y if ACER_PICA_61 || CASIO_E55 || DDB5074 || DDB5476 || DDB5477 || MACH_DECSTATION || IBM_WORKPAD || LASAT || MIPS_COBALT || MIPS_ITE8172 || MIPS_IVR || SOC_AU1X00 || OLIVETTI_M700 || SNI_RM200_PCI || VICTOR_MPC30X || ZAO_CAPCELLA
-        default n if MIPS_EV64120 || MIPS_EV96100 || MOMENCO_OCELOT || MOMENCO_OCELOT_G || SGI_IP22 || SGI_IP27 || SGI_IP32 || TOSHIBA_JMR3927
+#
+# Endianess selection.  Suffiently obscure so many users don't know what to
+# answer,so we try hard to limit the available choices.  Also the use of a
+# choice statement should be more obvious to the user.
+#
+choice
+        prompt "Endianess selection"
         help
           Some MIPS machines can be configured for either little or big endian
-          byte order. These modes require different kernels. Say Y if your
-          machine is little endian, N if it's a big endian machine.
+          byte order. These modes require different kernels and a different
+          Linux distribution.  In general there is one prefered byteorder for a
+          particular system but some systems are just as commonly used in the
+          one or the other endianess.
+
+config CPU_BIG_ENDIAN
+        bool "Big endian"
+        depends on SYS_SUPPORTS_BIG_ENDIAN
+
+config CPU_LITTLE_ENDIAN
+        bool "Little endian"
+        depends on SYS_SUPPORTS_LITTLE_ENDIAN
+        help
+
+endchoice
+
+config SYS_SUPPORTS_BIG_ENDIAN
+        bool
+
+config SYS_SUPPORTS_LITTLE_ENDIAN
+        bool
 
 config IRQ_CPU
         bool
@@ -977,42 +818,57 @@ config IRQ_CPU
 config IRQ_CPU_RM7K
         bool
 
+config IRQ_CPU_RM9K
+        bool
+
 config IRQ_MV64340
         bool
 
 config DDB5XXX_COMMON
         bool
-        depends on DDB5074 || DDB5476 || DDB5477
-        default y
 
 config MIPS_BOARDS_GEN
         bool
-        depends on MIPS_ATLAS || MIPS_MALTA || MIPS_SEAD
-        default y
 
 config MIPS_GT64111
         bool
-        depends on MIPS_COBALT
-        default y
 
 config MIPS_GT64120
         bool
-        depends on MIPS_EV64120 || MIPS_EV96100 || LASAT || MIPS_ATLAS || MIPS_MALTA || MOMENCO_OCELOT
-        default y
 
 config MIPS_TX3927
         bool
-        depends on TOSHIBA_JMR3927
         select HAS_TXX9_SERIAL
-        default y
 
 config PCI_MARVELL
         bool
 
 config ITE_BOARD_GEN
         bool
-        depends on MIPS_IVR || MIPS_ITE8172
-        default y
+
+config SOC_AU1000
+        bool
+        select SOC_AU1X00
+
+config SOC_AU1100
+        bool
+        select SOC_AU1X00
+
+config SOC_AU1500
+        bool
+        select SOC_AU1X00
+
+config SOC_AU1550
+        bool
+        select SOC_AU1X00
+
+config SOC_AU1200
+        bool
+        select SOC_AU1X00
+
+config SOC_AU1X00
+        bool
+        select SYS_SUPPORTS_32BIT_KERNEL
 
 config PNX8550
         bool
@@ -1049,6 +905,9 @@ config SYSCLK_100
 
 endchoice
 
+config ARC32
+        bool
+
 config AU1X00_USB_DEVICE
         bool
         depends on MIPS_PB1500 || MIPS_PB1100 || MIPS_PB1000
@@ -1056,11 +915,7 @@ config AU1X00_USB_DEVICE
 
 config MIPS_GT96100
         bool
-        depends on MIPS_EV96100
-        default y
-        help
-          Say Y here to support the Galileo Technology GT96100 communications
-          controller card.  There is a web page at <http://www.galileot.com/>.
+        select MIPS_GT64120
 
 config IT8172_CIR
         bool
@@ -1074,8 +929,6 @@ config IT8712
 
 config BOOT_ELF32
         bool
-        depends on MACH_DECSTATION || MIPS_ATLAS || MIPS_MALTA || MOMENCO_JAGUAR_ATX || MOMENCO_OCELOT_3 || SIBYTE_SB1xxx_SOC || SGI_IP32 || SGI_IP22 || SNI_RM200_PCI
-        default y
 
 config MIPS_L1_CACHE_SHIFT
         int
@@ -1083,11 +936,6 @@ config MIPS_L1_CACHE_SHIFT
         default "7" if SGI_IP27
         default "5"
 
-config ARC32
-        bool
-        depends on MACH_JAZZ || SNI_RM200_PCI || SGI_IP22 || SGI_IP32
-        default y
-
 config HAVE_STD_PC_SERIAL_PORT
         bool
 
@@ -1107,25 +955,12 @@ config ARC_PROMLIB
 
 config ARC64
         bool
-        depends on SGI_IP27
-        default y
 
 config BOOT_ELF64
         bool
-        depends on SGI_IP27
-        default y
-
-#config MAPPED_PCI_IO y
-#       bool
-#       depends on SGI_IP27
-#       default y
 
 config TOSHIBA_BOARDS
         bool
-        depends on TOSHIBA_JMR3927 || TOSHIBA_RBTX4927
-        default y
-
-endmenu
 
 menu "CPU selection"
 
@@ -1138,7 +973,7 @@ config CPU_MIPS32_R1
         select CPU_HAS_PREFETCH
         select CPU_SUPPORTS_32BIT_KERNEL
         help
-          Choose this option to build a kernel for release 2 or later of the
+          Choose this option to build a kernel for release 1 or later of the
           MIPS32 architecture.  Most modern embedded systems with a 32-bit
           MIPS processor are based on a MIPS32 processor.  If you know the
           specific type of processor in your system, choose those that one
@@ -1153,7 +988,7 @@ config CPU_MIPS32_R2
         select CPU_HAS_PREFETCH
         select CPU_SUPPORTS_32BIT_KERNEL
         help
-          Choose this option to build a kernel for release 1 or later of the
+          Choose this option to build a kernel for release 2 or later of the
           MIPS32 architecture.  Most modern embedded systems with a 32-bit
           MIPS processor are based on a MIPS32 processor.  If you know the
           specific type of processor in your system, choose those that one
@@ -1208,7 +1043,7 @@ config CPU_VR41XX
         select CPU_SUPPORTS_32BIT_KERNEL
         select CPU_SUPPORTS_64BIT_KERNEL
         help
-          The options selects support for the NEC VR41xx series of processors.
+          The options selects support for the NEC VR4100 series of processors.
           Only choose this option if you have one of these processors as a
           kernel built with this option will not run on any other type of
           processor or vice versa.
@@ -1242,6 +1077,8 @@ config CPU_R5000
 
 config CPU_R5432
         bool "R5432"
+        select CPU_SUPPORTS_32BIT_KERNEL
+        select CPU_SUPPORTS_64BIT_KERNEL
 
 config CPU_R6000
         bool "R6000"
@@ -1261,6 +1098,7 @@ config CPU_NEVADA
 config CPU_R8000
         bool "R8000"
         depends on EXPERIMENTAL
+        select CPU_HAS_PREFETCH
         select CPU_SUPPORTS_64BIT_KERNEL
         help
           MIPS Technologies R8000 processors.  Note these processors are
@@ -1268,6 +1106,7 @@ config CPU_R8000
 
 config CPU_R10000
         bool "R10000"
+        select CPU_HAS_PREFETCH
         select CPU_SUPPORTS_32BIT_KERNEL
         select CPU_SUPPORTS_64BIT_KERNEL
         select CPU_SUPPORTS_HIGHMEM
@@ -1276,12 +1115,14 @@ config CPU_R10000
 
 config CPU_RM7000
         bool "RM7000"
+        select CPU_HAS_PREFETCH
         select CPU_SUPPORTS_32BIT_KERNEL
         select CPU_SUPPORTS_64BIT_KERNEL
         select CPU_SUPPORTS_HIGHMEM
 
 config CPU_RM9000
         bool "RM9000"
+        select CPU_HAS_PREFETCH
         select CPU_SUPPORTS_32BIT_KERNEL
         select CPU_SUPPORTS_64BIT_KERNEL
         select CPU_SUPPORTS_HIGHMEM
@@ -1294,6 +1135,64 @@ config CPU_SB1
 
 endchoice
 
+endmenu
+
+#
+# These two indicate any levelof the MIPS32 and MIPS64 architecture
+#
+config CPU_MIPS32
+        bool
+        default y if CPU_MIPS32_R1 || CPU_MIPS32_R2
+
+config CPU_MIPS64
+        bool
+        default y if CPU_MIPS64_R1 || CPU_MIPS64_R2
+
+#
+# These two indicate the revision of the architecture, either 32 bot 64 bit.
+#
+config CPU_MIPSR1
+        bool
+        default y if CPU_MIPS32_R1 || CPU_MIPS64_R1
+
+config CPU_MIPSR2
+        bool
+        default y if CPU_MIPS32_R2 || CPU_MIPS64_R2
+
+config SYS_SUPPORTS_32BIT_KERNEL
+        bool
+config SYS_SUPPORTS_64BIT_KERNEL
+        bool
+config CPU_SUPPORTS_32BIT_KERNEL
+        bool
+config CPU_SUPPORTS_64BIT_KERNEL
+        bool
+
+menu "Kernel type"
+
+choice
+
+        prompt "Kernel code model"
+        help
+          You should only select this option if you have a workload that
+          actually benefits from 64-bit processing or if your machine has
+          large memory.  You will only be presented a single option in this
+          menu if your system does not support both 32-bit and 64-bit kernels.
+
+config 32BIT
+        bool "32-bit kernel"
+        depends on CPU_SUPPORTS_32BIT_KERNEL && SYS_SUPPORTS_32BIT_KERNEL
+        select TRAD_SIGNALS
+        help
+          Select this option if you want to build a 32-bit kernel.
+config 64BIT
+        bool "64-bit kernel"
+        depends on CPU_SUPPORTS_64BIT_KERNEL && SYS_SUPPORTS_64BIT_KERNEL
+        help
+          Select this option if you want to build a 64-bit kernel.
+
+endchoice
+
 choice
         prompt "Kernel page size"
         default PAGE_SIZE_4KB
@@ -1396,8 +1295,9 @@ config MIPS_VPE_LOADER_TOM
 
 # this should possibly be in drivers/char, but it is rather cpu related. Hmmm
 config MIPS_VPE_APSP_API
-      bool "Enable support for AP/SP API (RTLX)"
-      depends on MIPS_VPE_LOADER
+        bool "Enable support for AP/SP API (RTLX)"
+        depends on MIPS_VPE_LOADER
+        help
 
 config SB1_PASS_1_WORKAROUNDS
         bool
@@ -1580,14 +1480,16 @@ config MIPS_INSANE_LARGE
           This will result in additional memory usage, so it is not
           recommended for normal users.
 
+endmenu
+
 config RWSEM_GENERIC_SPINLOCK
         bool
         default y
 
-endmenu
-
 menu "Bus options (PCI, PCMCIA, EISA, ISA, TC)"
 
+config HW_HAS_EISA
+        bool
 config HW_HAS_PCI
         bool
 
@@ -1621,7 +1523,7 @@ config ISA
 
 config EISA
         bool "EISA support"
-        depends on SGI_IP22 || SNI_RM200_PCI
+        depends on HW_HAS_EISA
         select ISA
         ---help---
           The Extended Industry Standard Architecture (EISA) bus was
@@ -1655,12 +1557,6 @@ config MMU
         bool
         default y
 
-config MCA
-        bool
-
-config SBUS
-        bool
-
 source "drivers/pcmcia/Kconfig"
 
 source "drivers/pci/hotplug/Kconfig"
@@ -1673,7 +1569,6 @@ source "fs/Kconfig.binfmt"
 
 config TRAD_SIGNALS
         bool
-        default y if 32BIT
 
 config BUILD_ELF64
         bool "Use 64-bit ELF format for building"
@@ -1692,7 +1587,7 @@ config BUILD_ELF64
 
 config BINFMT_IRIX
         bool "Include IRIX binary compatibility"
-        depends on !CPU_LITTLE_ENDIAN && 32BIT && BROKEN
+        depends on CPU_BIG_ENDIAN && 32BIT && BROKEN
 
 config MIPS32_COMPAT
         bool "Kernel support for Linux/MIPS 32-bit binary compatibility"
@@ -1751,7 +1646,7 @@ config SECCOMP
 
 config PM
         bool "Power Management support (EXPERIMENTAL)"
-        depends on EXPERIMENTAL && MACH_AU1X00
+        depends on EXPERIMENTAL && SOC_AU1X00
 
 endmenu
 
@@ -1761,6 +1656,8 @@ source "drivers/Kconfig"
 
 source "fs/Kconfig"
 
+source "arch/mips/oprofile/Kconfig"
+
 source "arch/mips/Kconfig.debug"
 
 source "security/Kconfig"
@@ -1768,7 +1665,3 @@ source "security/Kconfig"
 source "crypto/Kconfig"
 
 source "lib/Kconfig"
-
-config ISA_DMA_API
-        bool
-        default y