diff options
Diffstat (limited to 'arch/m68knommu')
139 files changed, 0 insertions, 15835 deletions
diff --git a/arch/m68knommu/include/asm/Kbuild b/arch/m68knommu/include/asm/Kbuild deleted file mode 100644 index c68e1680da01..000000000000 --- a/arch/m68knommu/include/asm/Kbuild +++ /dev/null | |||
| @@ -1 +0,0 @@ | |||
| 1 | include include/asm-generic/Kbuild.asm | ||
diff --git a/arch/m68knommu/include/asm/MC68328.h b/arch/m68knommu/include/asm/MC68328.h deleted file mode 100644 index a337e56d09bf..000000000000 --- a/arch/m68knommu/include/asm/MC68328.h +++ /dev/null | |||
| @@ -1,1266 +0,0 @@ | |||
| 1 | |||
| 2 | /* include/asm-m68knommu/MC68328.h: '328 control registers | ||
| 3 | * | ||
| 4 | * Copyright (C) 1999 Vladimir Gurevich <vgurevic@cisco.com> | ||
| 5 | * Bear & Hare Software, Inc. | ||
| 6 | * | ||
| 7 | * Based on include/asm-m68knommu/MC68332.h | ||
| 8 | * Copyright (C) 1998 Kenneth Albanowski <kjahds@kjahds.com>, | ||
| 9 | * | ||
| 10 | */ | ||
| 11 | |||
| 12 | #ifndef _MC68328_H_ | ||
| 13 | #define _MC68328_H_ | ||
| 14 | |||
| 15 | #define BYTE_REF(addr) (*((volatile unsigned char*)addr)) | ||
| 16 | #define WORD_REF(addr) (*((volatile unsigned short*)addr)) | ||
| 17 | #define LONG_REF(addr) (*((volatile unsigned long*)addr)) | ||
| 18 | |||
| 19 | #define PUT_FIELD(field, val) (((val) << field##_SHIFT) & field##_MASK) | ||
| 20 | #define GET_FIELD(reg, field) (((reg) & field##_MASK) >> field##_SHIFT) | ||
| 21 | |||
| 22 | /********** | ||
| 23 | * | ||
| 24 | * 0xFFFFF0xx -- System Control | ||
| 25 | * | ||
| 26 | **********/ | ||
| 27 | |||
| 28 | /* | ||
| 29 | * System Control Register (SCR) | ||
| 30 | */ | ||
| 31 | #define SCR_ADDR 0xfffff000 | ||
| 32 | #define SCR BYTE_REF(SCR_ADDR) | ||
| 33 | |||
| 34 | #define SCR_WDTH8 0x01 /* 8-Bit Width Select */ | ||
| 35 | #define SCR_DMAP 0x04 /* Double Map */ | ||
| 36 | #define SCR_SO 0x08 /* Supervisor Only */ | ||
| 37 | #define SCR_BETEN 0x10 /* Bus-Error Time-Out Enable */ | ||
| 38 | #define SCR_PRV 0x20 /* Privilege Violation */ | ||
| 39 | #define SCR_WPV 0x40 /* Write Protect Violation */ | ||
| 40 | #define SCR_BETO 0x80 /* Bus-Error TimeOut */ | ||
| 41 | |||
| 42 | /* | ||
| 43 | * Mask Revision Register | ||
| 44 | */ | ||
| 45 | #define MRR_ADDR 0xfffff004 | ||
| 46 | #define MRR LONG_REF(MRR_ADDR) | ||
| 47 | |||
| 48 | /********** | ||
| 49 | * | ||
| 50 | * 0xFFFFF1xx -- Chip-Select logic | ||
| 51 | * | ||
| 52 | **********/ | ||
| 53 | |||
| 54 | /********** | ||
| 55 | * | ||
| 56 | * 0xFFFFF2xx -- Phase Locked Loop (PLL) & Power Control | ||
| 57 | * | ||
| 58 | **********/ | ||
| 59 | |||
| 60 | /* | ||
| 61 | * Group Base Address Registers | ||
| 62 | */ | ||
| 63 | #define GRPBASEA_ADDR 0xfffff100 | ||
| 64 | #define GRPBASEB_ADDR 0xfffff102 | ||
| 65 | #define GRPBASEC_ADDR 0xfffff104 | ||
| 66 | #define GRPBASED_ADDR 0xfffff106 | ||
| 67 | |||
| 68 | #define GRPBASEA WORD_REF(GRPBASEA_ADDR) | ||
| 69 | #define GRPBASEB WORD_REF(GRPBASEB_ADDR) | ||
| 70 | #define GRPBASEC WORD_REF(GRPBASEC_ADDR) | ||
| 71 | #define GRPBASED WORD_REF(GRPBASED_ADDR) | ||
| 72 | |||
| 73 | #define GRPBASE_V 0x0001 /* Valid */ | ||
| 74 | #define GRPBASE_GBA_MASK 0xfff0 /* Group Base Address (bits 31-20) */ | ||
| 75 | |||
| 76 | /* | ||
| 77 | * Group Base Address Mask Registers | ||
| 78 | */ | ||
| 79 | #define GRPMASKA_ADDR 0xfffff108 | ||
| 80 | #define GRPMASKB_ADDR 0xfffff10a | ||
| 81 | #define GRPMASKC_ADDR 0xfffff10c | ||
| 82 | #define GRPMASKD_ADDR 0xfffff10e | ||
| 83 | |||
| 84 | #define GRPMASKA WORD_REF(GRPMASKA_ADDR) | ||
| 85 | #define GRPMASKB WORD_REF(GRPMASKB_ADDR) | ||
| 86 | #define GRPMASKC WORD_REF(GRPMASKC_ADDR) | ||
| 87 | #define GRPMASKD WORD_REF(GRPMASKD_ADDR) | ||
| 88 | |||
| 89 | #define GRMMASK_GMA_MASK 0xfffff0 /* Group Base Mask (bits 31-20) */ | ||
| 90 | |||
| 91 | /* | ||
| 92 | * Chip-Select Option Registers (group A) | ||
| 93 | */ | ||
| 94 | #define CSA0_ADDR 0xfffff110 | ||
| 95 | #define CSA1_ADDR 0xfffff114 | ||
| 96 | #define CSA2_ADDR 0xfffff118 | ||
| 97 | #define CSA3_ADDR 0xfffff11c | ||
| 98 | |||
| 99 | #define CSA0 LONG_REF(CSA0_ADDR) | ||
| 100 | #define CSA1 LONG_REF(CSA1_ADDR) | ||
| 101 | #define CSA2 LONG_REF(CSA2_ADDR) | ||
| 102 | #define CSA3 LONG_REF(CSA3_ADDR) | ||
| 103 | |||
| 104 | #define CSA_WAIT_MASK 0x00000007 /* Wait State Selection */ | ||
| 105 | #define CSA_WAIT_SHIFT 0 | ||
| 106 | #define CSA_RO 0x00000008 /* Read-Only */ | ||
| 107 | #define CSA_AM_MASK 0x0000ff00 /* Address Mask (bits 23-16) */ | ||
| 108 | #define CSA_AM_SHIFT 8 | ||
| 109 | #define CSA_BUSW 0x00010000 /* Bus Width Select */ | ||
| 110 | #define CSA_AC_MASK 0xff000000 /* Address Compare (bits 23-16) */ | ||
| 111 | #define CSA_AC_SHIFT 24 | ||
| 112 | |||
| 113 | /* | ||
| 114 | * Chip-Select Option Registers (group B) | ||
| 115 | */ | ||
| 116 | #define CSB0_ADDR 0xfffff120 | ||
| 117 | #define CSB1_ADDR 0xfffff124 | ||
| 118 | #define CSB2_ADDR 0xfffff128 | ||
| 119 | #define CSB3_ADDR 0xfffff12c | ||
| 120 | |||
| 121 | #define CSB0 LONG_REF(CSB0_ADDR) | ||
| 122 | #define CSB1 LONG_REF(CSB1_ADDR) | ||
| 123 | #define CSB2 LONG_REF(CSB2_ADDR) | ||
| 124 | #define CSB3 LONG_REF(CSB3_ADDR) | ||
| 125 | |||
| 126 | #define CSB_WAIT_MASK 0x00000007 /* Wait State Selection */ | ||
| 127 | #define CSB_WAIT_SHIFT 0 | ||
| 128 | #define CSB_RO 0x00000008 /* Read-Only */ | ||
| 129 | #define CSB_AM_MASK 0x0000ff00 /* Address Mask (bits 23-16) */ | ||
| 130 | #define CSB_AM_SHIFT 8 | ||
| 131 | #define CSB_BUSW 0x00010000 /* Bus Width Select */ | ||
| 132 | #define CSB_AC_MASK 0xff000000 /* Address Compare (bits 23-16) */ | ||
| 133 | #define CSB_AC_SHIFT 24 | ||
| 134 | |||
| 135 | /* | ||
| 136 | * Chip-Select Option Registers (group C) | ||
| 137 | */ | ||
| 138 | #define CSC0_ADDR 0xfffff130 | ||
| 139 | #define CSC1_ADDR 0xfffff134 | ||
| 140 | #define CSC2_ADDR 0xfffff138 | ||
| 141 | #define CSC3_ADDR 0xfffff13c | ||
| 142 | |||
| 143 | #define CSC0 LONG_REF(CSC0_ADDR) | ||
| 144 | #define CSC1 LONG_REF(CSC1_ADDR) | ||
| 145 | #define CSC2 LONG_REF(CSC2_ADDR) | ||
| 146 | #define CSC3 LONG_REF(CSC3_ADDR) | ||
| 147 | |||
| 148 | #define CSC_WAIT_MASK 0x00000007 /* Wait State Selection */ | ||
| 149 | #define CSC_WAIT_SHIFT 0 | ||
| 150 | #define CSC_RO 0x00000008 /* Read-Only */ | ||
| 151 | #define CSC_AM_MASK 0x0000fff0 /* Address Mask (bits 23-12) */ | ||
| 152 | #define CSC_AM_SHIFT 4 | ||
| 153 | #define CSC_BUSW 0x00010000 /* Bus Width Select */ | ||
| 154 | #define CSC_AC_MASK 0xfff00000 /* Address Compare (bits 23-12) */ | ||
| 155 | #define CSC_AC_SHIFT 20 | ||
| 156 | |||
| 157 | /* | ||
| 158 | * Chip-Select Option Registers (group D) | ||
| 159 | */ | ||
| 160 | #define CSD0_ADDR 0xfffff140 | ||
| 161 | #define CSD1_ADDR 0xfffff144 | ||
| 162 | #define CSD2_ADDR 0xfffff148 | ||
| 163 | #define CSD3_ADDR 0xfffff14c | ||
| 164 | |||
| 165 | #define CSD0 LONG_REF(CSD0_ADDR) | ||
| 166 | #define CSD1 LONG_REF(CSD1_ADDR) | ||
| 167 | #define CSD2 LONG_REF(CSD2_ADDR) | ||
| 168 | #define CSD3 LONG_REF(CSD3_ADDR) | ||
| 169 | |||
| 170 | #define CSD_WAIT_MASK 0x00000007 /* Wait State Selection */ | ||
| 171 | #define CSD_WAIT_SHIFT 0 | ||
| 172 | #define CSD_RO 0x00000008 /* Read-Only */ | ||
| 173 | #define CSD_AM_MASK 0x0000fff0 /* Address Mask (bits 23-12) */ | ||
| 174 | #define CSD_AM_SHIFT 4 | ||
| 175 | #define CSD_BUSW 0x00010000 /* Bus Width Select */ | ||
| 176 | #define CSD_AC_MASK 0xfff00000 /* Address Compare (bits 23-12) */ | ||
| 177 | #define CSD_AC_SHIFT 20 | ||
| 178 | |||
| 179 | /********** | ||
| 180 | * | ||
| 181 | * 0xFFFFF2xx -- Phase Locked Loop (PLL) & Power Control | ||
| 182 | * | ||
| 183 | **********/ | ||
| 184 | |||
| 185 | /* | ||
| 186 | * PLL Control Register | ||
| 187 | */ | ||
| 188 | #define PLLCR_ADDR 0xfffff200 | ||
| 189 | #define PLLCR WORD_REF(PLLCR_ADDR) | ||
| 190 | |||
| 191 | #define PLLCR_DISPLL 0x0008 /* Disable PLL */ | ||
| 192 | #define PLLCR_CLKEN 0x0010 /* Clock (CLKO pin) enable */ | ||
| 193 | #define PLLCR_SYSCLK_SEL_MASK 0x0700 /* System Clock Selection */ | ||
| 194 | #define PLLCR_SYSCLK_SEL_SHIFT 8 | ||
| 195 | #define PLLCR_PIXCLK_SEL_MASK 0x3800 /* LCD Clock Selection */ | ||
| 196 | #define PLLCR_PIXCLK_SEL_SHIFT 11 | ||
| 197 | |||
| 198 | /* 'EZ328-compatible definitions */ | ||
| 199 | #define PLLCR_LCDCLK_SEL_MASK PLLCR_PIXCLK_SEL_MASK | ||
| 200 | #define PLLCR_LCDCLK_SEL_SHIFT PLLCR_PIXCLK_SEL_SHIFT | ||
| 201 | |||
| 202 | /* | ||
| 203 | * PLL Frequency Select Register | ||
| 204 | */ | ||
| 205 | #define PLLFSR_ADDR 0xfffff202 | ||
| 206 | #define PLLFSR WORD_REF(PLLFSR_ADDR) | ||
| 207 | |||
| 208 | #define PLLFSR_PC_MASK 0x00ff /* P Count */ | ||
| 209 | #define PLLFSR_PC_SHIFT 0 | ||
| 210 | #define PLLFSR_QC_MASK 0x0f00 /* Q Count */ | ||
| 211 | #define PLLFSR_QC_SHIFT 8 | ||
| 212 | #define PLLFSR_PROT 0x4000 /* Protect P & Q */ | ||
| 213 | #define PLLFSR_CLK32 0x8000 /* Clock 32 (kHz) */ | ||
| 214 | |||
| 215 | /* | ||
| 216 | * Power Control Register | ||
| 217 | */ | ||
| 218 | #define PCTRL_ADDR 0xfffff207 | ||
| 219 | #define PCTRL BYTE_REF(PCTRL_ADDR) | ||
| 220 | |||
| 221 | #define PCTRL_WIDTH_MASK 0x1f /* CPU Clock bursts width */ | ||
| 222 | #define PCTRL_WIDTH_SHIFT 0 | ||
| 223 | #define PCTRL_STOP 0x40 /* Enter power-save mode immediately */ | ||
| 224 | #define PCTRL_PCEN 0x80 /* Power Control Enable */ | ||
| 225 | |||
| 226 | /********** | ||
| 227 | * | ||
| 228 | * 0xFFFFF3xx -- Interrupt Controller | ||
| 229 | * | ||
| 230 | **********/ | ||
| 231 | |||
| 232 | /* | ||
| 233 | * Interrupt Vector Register | ||
| 234 | */ | ||
| 235 | #define IVR_ADDR 0xfffff300 | ||
| 236 | #define IVR BYTE_REF(IVR_ADDR) | ||
| 237 | |||
| 238 | #define IVR_VECTOR_MASK 0xF8 | ||
| 239 | |||
| 240 | /* | ||
| 241 | * Interrupt control Register | ||
| 242 | */ | ||
| 243 | #define ICR_ADRR 0xfffff302 | ||
| 244 | #define ICR WORD_REF(ICR_ADDR) | ||
| 245 | |||
| 246 | #define ICR_ET6 0x0100 /* Edge Trigger Select for IRQ6 */ | ||
| 247 | #define ICR_ET3 0x0200 /* Edge Trigger Select for IRQ3 */ | ||
| 248 | #define ICR_ET2 0x0400 /* Edge Trigger Select for IRQ2 */ | ||
| 249 | #define ICR_ET1 0x0800 /* Edge Trigger Select for IRQ1 */ | ||
| 250 | #define ICR_POL6 0x1000 /* Polarity Control for IRQ6 */ | ||
| 251 | #define ICR_POL3 0x2000 /* Polarity Control for IRQ3 */ | ||
| 252 | #define ICR_POL2 0x4000 /* Polarity Control for IRQ2 */ | ||
| 253 | #define ICR_POL1 0x8000 /* Polarity Control for IRQ1 */ | ||
| 254 | |||
| 255 | /* | ||
| 256 | * Interrupt Mask Register | ||
| 257 | */ | ||
| 258 | #define IMR_ADDR 0xfffff304 | ||
| 259 | #define IMR LONG_REF(IMR_ADDR) | ||
| 260 | |||
| 261 | /* | ||
| 262 | * Define the names for bit positions first. This is useful for | ||
| 263 | * request_irq | ||
| 264 | */ | ||
| 265 | #define SPIM_IRQ_NUM 0 /* SPI Master interrupt */ | ||
| 266 | #define TMR2_IRQ_NUM 1 /* Timer 2 interrupt */ | ||
| 267 | #define UART_IRQ_NUM 2 /* UART interrupt */ | ||
| 268 | #define WDT_IRQ_NUM 3 /* Watchdog Timer interrupt */ | ||
| 269 | #define RTC_IRQ_NUM 4 /* RTC interrupt */ | ||
| 270 | #define KB_IRQ_NUM 6 /* Keyboard Interrupt */ | ||
| 271 | #define PWM_IRQ_NUM 7 /* Pulse-Width Modulator int. */ | ||
| 272 | #define INT0_IRQ_NUM 8 /* External INT0 */ | ||
| 273 | #define INT1_IRQ_NUM 9 /* External INT1 */ | ||
| 274 | #define INT2_IRQ_NUM 10 /* External INT2 */ | ||
| 275 | #define INT3_IRQ_NUM 11 /* External INT3 */ | ||
| 276 | #define INT4_IRQ_NUM 12 /* External INT4 */ | ||
| 277 | #define INT5_IRQ_NUM 13 /* External INT5 */ | ||
| 278 | #define INT6_IRQ_NUM 14 /* External INT6 */ | ||
| 279 | #define INT7_IRQ_NUM 15 /* External INT7 */ | ||
| 280 | #define IRQ1_IRQ_NUM 16 /* IRQ1 */ | ||
| 281 | #define IRQ2_IRQ_NUM 17 /* IRQ2 */ | ||
| 282 | #define IRQ3_IRQ_NUM 18 /* IRQ3 */ | ||
| 283 | #define IRQ6_IRQ_NUM 19 /* IRQ6 */ | ||
| 284 | #define PEN_IRQ_NUM 20 /* Pen Interrupt */ | ||
| 285 | #define SPIS_IRQ_NUM 21 /* SPI Slave Interrupt */ | ||
| 286 | #define TMR1_IRQ_NUM 22 /* Timer 1 interrupt */ | ||
| 287 | #define IRQ7_IRQ_NUM 23 /* IRQ7 */ | ||
| 288 | |||
| 289 | /* '328-compatible definitions */ | ||
| 290 | #define SPI_IRQ_NUM SPIM_IRQ_NUM | ||
| 291 | #define TMR_IRQ_NUM TMR1_IRQ_NUM | ||
| 292 | |||
| 293 | /* | ||
| 294 | * Here go the bitmasks themselves | ||
| 295 | */ | ||
| 296 | #define IMR_MSPIM (1 << SPIM _IRQ_NUM) /* Mask SPI Master interrupt */ | ||
| 297 | #define IMR_MTMR2 (1 << TMR2_IRQ_NUM) /* Mask Timer 2 interrupt */ | ||
| 298 | #define IMR_MUART (1 << UART_IRQ_NUM) /* Mask UART interrupt */ | ||
| 299 | #define IMR_MWDT (1 << WDT_IRQ_NUM) /* Mask Watchdog Timer interrupt */ | ||
| 300 | #define IMR_MRTC (1 << RTC_IRQ_NUM) /* Mask RTC interrupt */ | ||
| 301 | #define IMR_MKB (1 << KB_IRQ_NUM) /* Mask Keyboard Interrupt */ | ||
| 302 | #define IMR_MPWM (1 << PWM_IRQ_NUM) /* Mask Pulse-Width Modulator int. */ | ||
| 303 | #define IMR_MINT0 (1 << INT0_IRQ_NUM) /* Mask External INT0 */ | ||
| 304 | #define IMR_MINT1 (1 << INT1_IRQ_NUM) /* Mask External INT1 */ | ||
| 305 | #define IMR_MINT2 (1 << INT2_IRQ_NUM) /* Mask External INT2 */ | ||
| 306 | #define IMR_MINT3 (1 << INT3_IRQ_NUM) /* Mask External INT3 */ | ||
| 307 | #define IMR_MINT4 (1 << INT4_IRQ_NUM) /* Mask External INT4 */ | ||
| 308 | #define IMR_MINT5 (1 << INT5_IRQ_NUM) /* Mask External INT5 */ | ||
| 309 | #define IMR_MINT6 (1 << INT6_IRQ_NUM) /* Mask External INT6 */ | ||
| 310 | #define IMR_MINT7 (1 << INT7_IRQ_NUM) /* Mask External INT7 */ | ||
| 311 | #define IMR_MIRQ1 (1 << IRQ1_IRQ_NUM) /* Mask IRQ1 */ | ||
| 312 | #define IMR_MIRQ2 (1 << IRQ2_IRQ_NUM) /* Mask IRQ2 */ | ||
| 313 | #define IMR_MIRQ3 (1 << IRQ3_IRQ_NUM) /* Mask IRQ3 */ | ||
| 314 | #define IMR_MIRQ6 (1 << IRQ6_IRQ_NUM) /* Mask IRQ6 */ | ||
| 315 | #define IMR_MPEN (1 << PEN_IRQ_NUM) /* Mask Pen Interrupt */ | ||
| 316 | #define IMR_MSPIS (1 << SPIS_IRQ_NUM) /* Mask SPI Slave Interrupt */ | ||
| 317 | #define IMR_MTMR1 (1 << TMR1_IRQ_NUM) /* Mask Timer 1 interrupt */ | ||
| 318 | #define IMR_MIRQ7 (1 << IRQ7_IRQ_NUM) /* Mask IRQ7 */ | ||
| 319 | |||
| 320 | /* 'EZ328-compatible definitions */ | ||
| 321 | #define IMR_MSPI IMR_MSPIM | ||
| 322 | #define IMR_MTMR IMR_MTMR1 | ||
| 323 | |||
| 324 | /* | ||
| 325 | * Interrupt Wake-Up Enable Register | ||
| 326 | */ | ||
| 327 | #define IWR_ADDR 0xfffff308 | ||
| 328 | #define IWR LONG_REF(IWR_ADDR) | ||
| 329 | |||
| 330 | #define IWR_SPIM (1 << SPIM _IRQ_NUM) /* SPI Master interrupt */ | ||
| 331 | #define IWR_TMR2 (1 << TMR2_IRQ_NUM) /* Timer 2 interrupt */ | ||
| 332 | #define IWR_UART (1 << UART_IRQ_NUM) /* UART interrupt */ | ||
| 333 | #define IWR_WDT (1 << WDT_IRQ_NUM) /* Watchdog Timer interrupt */ | ||
| 334 | #define IWR_RTC (1 << RTC_IRQ_NUM) /* RTC interrupt */ | ||
| 335 | #define IWR_KB (1 << KB_IRQ_NUM) /* Keyboard Interrupt */ | ||
| 336 | #define IWR_PWM (1 << PWM_IRQ_NUM) /* Pulse-Width Modulator int. */ | ||
| 337 | #define IWR_INT0 (1 << INT0_IRQ_NUM) /* External INT0 */ | ||
| 338 | #define IWR_INT1 (1 << INT1_IRQ_NUM) /* External INT1 */ | ||
| 339 | #define IWR_INT2 (1 << INT2_IRQ_NUM) /* External INT2 */ | ||
| 340 | #define IWR_INT3 (1 << INT3_IRQ_NUM) /* External INT3 */ | ||
| 341 | #define IWR_INT4 (1 << INT4_IRQ_NUM) /* External INT4 */ | ||
| 342 | #define IWR_INT5 (1 << INT5_IRQ_NUM) /* External INT5 */ | ||
| 343 | #define IWR_INT6 (1 << INT6_IRQ_NUM) /* External INT6 */ | ||
| 344 | #define IWR_INT7 (1 << INT7_IRQ_NUM) /* External INT7 */ | ||
| 345 | #define IWR_IRQ1 (1 << IRQ1_IRQ_NUM) /* IRQ1 */ | ||
| 346 | #define IWR_IRQ2 (1 << IRQ2_IRQ_NUM) /* IRQ2 */ | ||
| 347 | #define IWR_IRQ3 (1 << IRQ3_IRQ_NUM) /* IRQ3 */ | ||
| 348 | #define IWR_IRQ6 (1 << IRQ6_IRQ_NUM) /* IRQ6 */ | ||
| 349 | #define IWR_PEN (1 << PEN_IRQ_NUM) /* Pen Interrupt */ | ||
| 350 | #define IWR_SPIS (1 << SPIS_IRQ_NUM) /* SPI Slave Interrupt */ | ||
| 351 | #define IWR_TMR1 (1 << TMR1_IRQ_NUM) /* Timer 1 interrupt */ | ||
| 352 | #define IWR_IRQ7 (1 << IRQ7_IRQ_NUM) /* IRQ7 */ | ||
| 353 | |||
| 354 | /* | ||
| 355 | * Interrupt Status Register | ||
| 356 | */ | ||
| 357 | #define ISR_ADDR 0xfffff30c | ||
| 358 | #define ISR LONG_REF(ISR_ADDR) | ||
| 359 | |||
| 360 | #define ISR_SPIM (1 << SPIM _IRQ_NUM) /* SPI Master interrupt */ | ||
| 361 | #define ISR_TMR2 (1 << TMR2_IRQ_NUM) /* Timer 2 interrupt */ | ||
| 362 | #define ISR_UART (1 << UART_IRQ_NUM) /* UART interrupt */ | ||
| 363 | #define ISR_WDT (1 << WDT_IRQ_NUM) /* Watchdog Timer interrupt */ | ||
| 364 | #define ISR_RTC (1 << RTC_IRQ_NUM) /* RTC interrupt */ | ||
| 365 | #define ISR_KB (1 << KB_IRQ_NUM) /* Keyboard Interrupt */ | ||
| 366 | #define ISR_PWM (1 << PWM_IRQ_NUM) /* Pulse-Width Modulator int. */ | ||
| 367 | #define ISR_INT0 (1 << INT0_IRQ_NUM) /* External INT0 */ | ||
| 368 | #define ISR_INT1 (1 << INT1_IRQ_NUM) /* External INT1 */ | ||
| 369 | #define ISR_INT2 (1 << INT2_IRQ_NUM) /* External INT2 */ | ||
| 370 | #define ISR_INT3 (1 << INT3_IRQ_NUM) /* External INT3 */ | ||
| 371 | #define ISR_INT4 (1 << INT4_IRQ_NUM) /* External INT4 */ | ||
| 372 | #define ISR_INT5 (1 << INT5_IRQ_NUM) /* External INT5 */ | ||
| 373 | #define ISR_INT6 (1 << INT6_IRQ_NUM) /* External INT6 */ | ||
| 374 | #define ISR_INT7 (1 << INT7_IRQ_NUM) /* External INT7 */ | ||
| 375 | #define ISR_IRQ1 (1 << IRQ1_IRQ_NUM) /* IRQ1 */ | ||
| 376 | #define ISR_IRQ2 (1 << IRQ2_IRQ_NUM) /* IRQ2 */ | ||
| 377 | #define ISR_IRQ3 (1 << IRQ3_IRQ_NUM) /* IRQ3 */ | ||
| 378 | #define ISR_IRQ6 (1 << IRQ6_IRQ_NUM) /* IRQ6 */ | ||
| 379 | #define ISR_PEN (1 << PEN_IRQ_NUM) /* Pen Interrupt */ | ||
| 380 | #define ISR_SPIS (1 << SPIS_IRQ_NUM) /* SPI Slave Interrupt */ | ||
| 381 | #define ISR_TMR1 (1 << TMR1_IRQ_NUM) /* Timer 1 interrupt */ | ||
| 382 | #define ISR_IRQ7 (1 << IRQ7_IRQ_NUM) /* IRQ7 */ | ||
| 383 | |||
| 384 | /* 'EZ328-compatible definitions */ | ||
| 385 | #define ISR_SPI ISR_SPIM | ||
| 386 | #define ISR_TMR ISR_TMR1 | ||
| 387 | |||
| 388 | /* | ||
| 389 | * Interrupt Pending Register | ||
| 390 | */ | ||
| 391 | #define IPR_ADDR 0xfffff310 | ||
| 392 | #define IPR LONG_REF(IPR_ADDR) | ||
| 393 | |||
| 394 | #define IPR_SPIM (1 << SPIM _IRQ_NUM) /* SPI Master interrupt */ | ||
| 395 | #define IPR_TMR2 (1 << TMR2_IRQ_NUM) /* Timer 2 interrupt */ | ||
| 396 | #define IPR_UART (1 << UART_IRQ_NUM) /* UART interrupt */ | ||
| 397 | #define IPR_WDT (1 << WDT_IRQ_NUM) /* Watchdog Timer interrupt */ | ||
| 398 | #define IPR_RTC (1 << RTC_IRQ_NUM) /* RTC interrupt */ | ||
| 399 | #define IPR_KB (1 << KB_IRQ_NUM) /* Keyboard Interrupt */ | ||
| 400 | #define IPR_PWM (1 << PWM_IRQ_NUM) /* Pulse-Width Modulator int. */ | ||
| 401 | #define IPR_INT0 (1 << INT0_IRQ_NUM) /* External INT0 */ | ||
| 402 | #define IPR_INT1 (1 << INT1_IRQ_NUM) /* External INT1 */ | ||
| 403 | #define IPR_INT2 (1 << INT2_IRQ_NUM) /* External INT2 */ | ||
| 404 | #define IPR_INT3 (1 << INT3_IRQ_NUM) /* External INT3 */ | ||
| 405 | #define IPR_INT4 (1 << INT4_IRQ_NUM) /* External INT4 */ | ||
| 406 | #define IPR_INT5 (1 << INT5_IRQ_NUM) /* External INT5 */ | ||
| 407 | #define IPR_INT6 (1 << INT6_IRQ_NUM) /* External INT6 */ | ||
| 408 | #define IPR_INT7 (1 << INT7_IRQ_NUM) /* External INT7 */ | ||
| 409 | #define IPR_IRQ1 (1 << IRQ1_IRQ_NUM) /* IRQ1 */ | ||
| 410 | #define IPR_IRQ2 (1 << IRQ2_IRQ_NUM) /* IRQ2 */ | ||
| 411 | #define IPR_IRQ3 (1 << IRQ3_IRQ_NUM) /* IRQ3 */ | ||
| 412 | #define IPR_IRQ6 (1 << IRQ6_IRQ_NUM) /* IRQ6 */ | ||
| 413 | #define IPR_PEN (1 << PEN_IRQ_NUM) /* Pen Interrupt */ | ||
| 414 | #define IPR_SPIS (1 << SPIS_IRQ_NUM) /* SPI Slave Interrupt */ | ||
| 415 | #define IPR_TMR1 (1 << TMR1_IRQ_NUM) /* Timer 1 interrupt */ | ||
| 416 | #define IPR_IRQ7 (1 << IRQ7_IRQ_NUM) /* IRQ7 */ | ||
| 417 | |||
| 418 | /* 'EZ328-compatible definitions */ | ||
| 419 | #define IPR_SPI IPR_SPIM | ||
| 420 | #define IPR_TMR IPR_TMR1 | ||
| 421 | |||
| 422 | /********** | ||
| 423 | * | ||
| 424 | * 0xFFFFF4xx -- Parallel Ports | ||
| 425 | * | ||
| 426 | **********/ | ||
| 427 | |||
| 428 | /* | ||
| 429 | * Port A | ||
| 430 | */ | ||
| 431 | #define PADIR_ADDR 0xfffff400 /* Port A direction reg */ | ||
| 432 | #define PADATA_ADDR 0xfffff401 /* Port A data register */ | ||
| 433 | #define PASEL_ADDR 0xfffff403 /* Port A Select register */ | ||
| 434 | |||
| 435 | #define PADIR BYTE_REF(PADIR_ADDR) | ||
| 436 | #define PADATA BYTE_REF(PADATA_ADDR) | ||
| 437 | #define PASEL BYTE_REF(PASEL_ADDR) | ||
| 438 | |||
| 439 | #define PA(x) (1 << (x)) | ||
| 440 | #define PA_A(x) PA((x) - 16) /* This is specific to PA only! */ | ||
| 441 | |||
| 442 | #define PA_A16 PA(0) /* Use A16 as PA(0) */ | ||
| 443 | #define PA_A17 PA(1) /* Use A17 as PA(1) */ | ||
| 444 | #define PA_A18 PA(2) /* Use A18 as PA(2) */ | ||
| 445 | #define PA_A19 PA(3) /* Use A19 as PA(3) */ | ||
| 446 | #define PA_A20 PA(4) /* Use A20 as PA(4) */ | ||
| 447 | #define PA_A21 PA(5) /* Use A21 as PA(5) */ | ||
| 448 | #define PA_A22 PA(6) /* Use A22 as PA(6) */ | ||
| 449 | #define PA_A23 PA(7) /* Use A23 as PA(7) */ | ||
| 450 | |||
| 451 | /* | ||
| 452 | * Port B | ||
| 453 | */ | ||
| 454 | #define PBDIR_ADDR 0xfffff408 /* Port B direction reg */ | ||
| 455 | #define PBDATA_ADDR 0xfffff409 /* Port B data register */ | ||
| 456 | #define PBSEL_ADDR 0xfffff40b /* Port B Select Register */ | ||
| 457 | |||
| 458 | #define PBDIR BYTE_REF(PBDIR_ADDR) | ||
| 459 | #define PBDATA BYTE_REF(PBDATA_ADDR) | ||
| 460 | #define PBSEL BYTE_REF(PBSEL_ADDR) | ||
| 461 | |||
| 462 | #define PB(x) (1 << (x)) | ||
| 463 | #define PB_D(x) PB(x) /* This is specific to port B only */ | ||
| 464 | |||
| 465 | #define PB_D0 PB(0) /* Use D0 as PB(0) */ | ||
| 466 | #define PB_D1 PB(1) /* Use D1 as PB(1) */ | ||
| 467 | #define PB_D2 PB(2) /* Use D2 as PB(2) */ | ||
| 468 | #define PB_D3 PB(3) /* Use D3 as PB(3) */ | ||
| 469 | #define PB_D4 PB(4) /* Use D4 as PB(4) */ | ||
| 470 | #define PB_D5 PB(5) /* Use D5 as PB(5) */ | ||
| 471 | #define PB_D6 PB(6) /* Use D6 as PB(6) */ | ||
| 472 | #define PB_D7 PB(7) /* Use D7 as PB(7) */ | ||
| 473 | |||
| 474 | /* | ||
| 475 | * Port C | ||
| 476 | */ | ||
| 477 | #define PCDIR_ADDR 0xfffff410 /* Port C direction reg */ | ||
| 478 | #define PCDATA_ADDR 0xfffff411 /* Port C data register */ | ||
| 479 | #define PCSEL_ADDR 0xfffff413 /* Port C Select Register */ | ||
| 480 | |||
| 481 | #define PCDIR BYTE_REF(PCDIR_ADDR) | ||
| 482 | #define PCDATA BYTE_REF(PCDATA_ADDR) | ||
| 483 | #define PCSEL BYTE_REF(PCSEL_ADDR) | ||
| 484 | |||
| 485 | #define PC(x) (1 << (x)) | ||
| 486 | |||
| 487 | #define PC_WE PC(6) /* Use WE as PC(6) */ | ||
| 488 | #define PC_DTACK PC(5) /* Use DTACK as PC(5) */ | ||
| 489 | #define PC_IRQ7 PC(4) /* Use IRQ7 as PC(4) */ | ||
| 490 | #define PC_LDS PC(2) /* Use LDS as PC(2) */ | ||
| 491 | #define PC_UDS PC(1) /* Use UDS as PC(1) */ | ||
| 492 | #define PC_MOCLK PC(0) /* Use MOCLK as PC(0) */ | ||
| 493 | |||
| 494 | /* | ||
| 495 | * Port D | ||
| 496 | */ | ||
| 497 | #define PDDIR_ADDR 0xfffff418 /* Port D direction reg */ | ||
| 498 | #define PDDATA_ADDR 0xfffff419 /* Port D data register */ | ||
| 499 | #define PDPUEN_ADDR 0xfffff41a /* Port D Pull-Up enable reg */ | ||
| 500 | #define PDPOL_ADDR 0xfffff41c /* Port D Polarity Register */ | ||
| 501 | #define PDIRQEN_ADDR 0xfffff41d /* Port D IRQ enable register */ | ||
| 502 | #define PDIQEG_ADDR 0xfffff41f /* Port D IRQ Edge Register */ | ||
| 503 | |||
| 504 | #define PDDIR BYTE_REF(PDDIR_ADDR) | ||
| 505 | #define PDDATA BYTE_REF(PDDATA_ADDR) | ||
| 506 | #define PDPUEN BYTE_REF(PDPUEN_ADDR) | ||
| 507 | #define PDPOL BYTE_REF(PDPOL_ADDR) | ||
| 508 | #define PDIRQEN BYTE_REF(PDIRQEN_ADDR) | ||
| 509 | #define PDIQEG BYTE_REF(PDIQEG_ADDR) | ||
| 510 | |||
| 511 | #define PD(x) (1 << (x)) | ||
| 512 | #define PD_KB(x) PD(x) /* This is specific for Port D only */ | ||
| 513 | |||
| 514 | #define PD_KB0 PD(0) /* Use KB0 as PD(0) */ | ||
| 515 | #define PD_KB1 PD(1) /* Use KB1 as PD(1) */ | ||
| 516 | #define PD_KB2 PD(2) /* Use KB2 as PD(2) */ | ||
| 517 | #define PD_KB3 PD(3) /* Use KB3 as PD(3) */ | ||
| 518 | #define PD_KB4 PD(4) /* Use KB4 as PD(4) */ | ||
| 519 | #define PD_KB5 PD(5) /* Use KB5 as PD(5) */ | ||
| 520 | #define PD_KB6 PD(6) /* Use KB6 as PD(6) */ | ||
| 521 | #define PD_KB7 PD(7) /* Use KB7 as PD(7) */ | ||
| 522 | |||
| 523 | /* | ||
| 524 | * Port E | ||
| 525 | */ | ||
| 526 | #define PEDIR_ADDR 0xfffff420 /* Port E direction reg */ | ||
| 527 | #define PEDATA_ADDR 0xfffff421 /* Port E data register */ | ||
| 528 | #define PEPUEN_ADDR 0xfffff422 /* Port E Pull-Up enable reg */ | ||
| 529 | #define PESEL_ADDR 0xfffff423 /* Port E Select Register */ | ||
| 530 | |||
| 531 | #define PEDIR BYTE_REF(PEDIR_ADDR) | ||
| 532 | #define PEDATA BYTE_REF(PEDATA_ADDR) | ||
| 533 | #define PEPUEN BYTE_REF(PEPUEN_ADDR) | ||
| 534 | #define PESEL BYTE_REF(PESEL_ADDR) | ||
| 535 | |||
| 536 | #define PE(x) (1 << (x)) | ||
| 537 | |||
| 538 | #define PE_CSA1 PE(1) /* Use CSA1 as PE(1) */ | ||
| 539 | #define PE_CSA2 PE(2) /* Use CSA2 as PE(2) */ | ||
| 540 | #define PE_CSA3 PE(3) /* Use CSA3 as PE(3) */ | ||
| 541 | #define PE_CSB0 PE(4) /* Use CSB0 as PE(4) */ | ||
| 542 | #define PE_CSB1 PE(5) /* Use CSB1 as PE(5) */ | ||
| 543 | #define PE_CSB2 PE(6) /* Use CSB2 as PE(6) */ | ||
| 544 | #define PE_CSB3 PE(7) /* Use CSB3 as PE(7) */ | ||
| 545 | |||
| 546 | /* | ||
| 547 | * Port F | ||
| 548 | */ | ||
| 549 | #define PFDIR_ADDR 0xfffff428 /* Port F direction reg */ | ||
| 550 | #define PFDATA_ADDR 0xfffff429 /* Port F data register */ | ||
| 551 | #define PFPUEN_ADDR 0xfffff42a /* Port F Pull-Up enable reg */ | ||
| 552 | #define PFSEL_ADDR 0xfffff42b /* Port F Select Register */ | ||
| 553 | |||
| 554 | #define PFDIR BYTE_REF(PFDIR_ADDR) | ||
| 555 | #define PFDATA BYTE_REF(PFDATA_ADDR) | ||
| 556 | #define PFPUEN BYTE_REF(PFPUEN_ADDR) | ||
| 557 | #define PFSEL BYTE_REF(PFSEL_ADDR) | ||
| 558 | |||
| 559 | #define PF(x) (1 << (x)) | ||
| 560 | #define PF_A(x) PF((x) - 24) /* This is Port F specific only */ | ||
| 561 | |||
| 562 | #define PF_A24 PF(0) /* Use A24 as PF(0) */ | ||
| 563 | #define PF_A25 PF(1) /* Use A25 as PF(1) */ | ||
| 564 | #define PF_A26 PF(2) /* Use A26 as PF(2) */ | ||
| 565 | #define PF_A27 PF(3) /* Use A27 as PF(3) */ | ||
| 566 | #define PF_A28 PF(4) /* Use A28 as PF(4) */ | ||
| 567 | #define PF_A29 PF(5) /* Use A29 as PF(5) */ | ||
| 568 | #define PF_A30 PF(6) /* Use A30 as PF(6) */ | ||
| 569 | #define PF_A31 PF(7) /* Use A31 as PF(7) */ | ||
| 570 | |||
| 571 | /* | ||
| 572 | * Port G | ||
| 573 | */ | ||
| 574 | #define PGDIR_ADDR 0xfffff430 /* Port G direction reg */ | ||
| 575 | #define PGDATA_ADDR 0xfffff431 /* Port G data register */ | ||
| 576 | #define PGPUEN_ADDR 0xfffff432 /* Port G Pull-Up enable reg */ | ||
| 577 | #define PGSEL_ADDR 0xfffff433 /* Port G Select Register */ | ||
| 578 | |||
| 579 | #define PGDIR BYTE_REF(PGDIR_ADDR) | ||
| 580 | #define PGDATA BYTE_REF(PGDATA_ADDR) | ||
| 581 | #define PGPUEN BYTE_REF(PGPUEN_ADDR) | ||
| 582 | #define PGSEL BYTE_REF(PGSEL_ADDR) | ||
| 583 | |||
| 584 | #define PG(x) (1 << (x)) | ||
| 585 | |||
| 586 | #define PG_UART_TXD PG(0) /* Use UART_TXD as PG(0) */ | ||
| 587 | #define PG_UART_RXD PG(1) /* Use UART_RXD as PG(1) */ | ||
| 588 | #define PG_PWMOUT PG(2) /* Use PWMOUT as PG(2) */ | ||
| 589 | #define PG_TOUT2 PG(3) /* Use TOUT2 as PG(3) */ | ||
| 590 | #define PG_TIN2 PG(4) /* Use TIN2 as PG(4) */ | ||
| 591 | #define PG_TOUT1 PG(5) /* Use TOUT1 as PG(5) */ | ||
| 592 | #define PG_TIN1 PG(6) /* Use TIN1 as PG(6) */ | ||
| 593 | #define PG_RTCOUT PG(7) /* Use RTCOUT as PG(7) */ | ||
| 594 | |||
| 595 | /* | ||
| 596 | * Port J | ||
| 597 | */ | ||
| 598 | #define PJDIR_ADDR 0xfffff438 /* Port J direction reg */ | ||
| 599 | #define PJDATA_ADDR 0xfffff439 /* Port J data register */ | ||
| 600 | #define PJSEL_ADDR 0xfffff43b /* Port J Select Register */ | ||
| 601 | |||
| 602 | #define PJDIR BYTE_REF(PJDIR_ADDR) | ||
| 603 | #define PJDATA BYTE_REF(PJDATA_ADDR) | ||
| 604 | #define PJSEL BYTE_REF(PJSEL_ADDR) | ||
| 605 | |||
| 606 | #define PJ(x) (1 << (x)) | ||
| 607 | |||
| 608 | #define PJ_CSD3 PJ(7) /* Use CSD3 as PJ(7) */ | ||
| 609 | |||
| 610 | /* | ||
| 611 | * Port K | ||
| 612 | */ | ||
| 613 | #define PKDIR_ADDR 0xfffff440 /* Port K direction reg */ | ||
| 614 | #define PKDATA_ADDR 0xfffff441 /* Port K data register */ | ||
| 615 | #define PKPUEN_ADDR 0xfffff442 /* Port K Pull-Up enable reg */ | ||
| 616 | #define PKSEL_ADDR 0xfffff443 /* Port K Select Register */ | ||
| 617 | |||
| 618 | #define PKDIR BYTE_REF(PKDIR_ADDR) | ||
| 619 | #define PKDATA BYTE_REF(PKDATA_ADDR) | ||
| 620 | #define PKPUEN BYTE_REF(PKPUEN_ADDR) | ||
| 621 | #define PKSEL BYTE_REF(PKSEL_ADDR) | ||
| 622 | |||
| 623 | #define PK(x) (1 << (x)) | ||
| 624 | |||
| 625 | /* | ||
| 626 | * Port M | ||
| 627 | */ | ||
| 628 | #define PMDIR_ADDR 0xfffff438 /* Port M direction reg */ | ||
| 629 | #define PMDATA_ADDR 0xfffff439 /* Port M data register */ | ||
| 630 | #define PMPUEN_ADDR 0xfffff43a /* Port M Pull-Up enable reg */ | ||
| 631 | #define PMSEL_ADDR 0xfffff43b /* Port M Select Register */ | ||
| 632 | |||
| 633 | #define PMDIR BYTE_REF(PMDIR_ADDR) | ||
| 634 | #define PMDATA BYTE_REF(PMDATA_ADDR) | ||
| 635 | #define PMPUEN BYTE_REF(PMPUEN_ADDR) | ||
| 636 | #define PMSEL BYTE_REF(PMSEL_ADDR) | ||
| 637 | |||
| 638 | #define PM(x) (1 << (x)) | ||
| 639 | |||
| 640 | /********** | ||
| 641 | * | ||
| 642 | * 0xFFFFF5xx -- Pulse-Width Modulator (PWM) | ||
| 643 | * | ||
| 644 | **********/ | ||
| 645 | |||
| 646 | /* | ||
| 647 | * PWM Control Register | ||
| 648 | */ | ||
| 649 | #define PWMC_ADDR 0xfffff500 | ||
| 650 | #define PWMC WORD_REF(PWMC_ADDR) | ||
| 651 | |||
| 652 | #define PWMC_CLKSEL_MASK 0x0007 /* Clock Selection */ | ||
| 653 | #define PWMC_CLKSEL_SHIFT 0 | ||
| 654 | #define PWMC_PWMEN 0x0010 /* Enable PWM */ | ||
| 655 | #define PMNC_POL 0x0020 /* PWM Output Bit Polarity */ | ||
| 656 | #define PWMC_PIN 0x0080 /* Current PWM output pin status */ | ||
| 657 | #define PWMC_LOAD 0x0100 /* Force a new period */ | ||
| 658 | #define PWMC_IRQEN 0x4000 /* Interrupt Request Enable */ | ||
| 659 | #define PWMC_CLKSRC 0x8000 /* Clock Source Select */ | ||
| 660 | |||
| 661 | /* 'EZ328-compatible definitions */ | ||
| 662 | #define PWMC_EN PWMC_PWMEN | ||
| 663 | |||
| 664 | /* | ||
| 665 | * PWM Period Register | ||
| 666 | */ | ||
| 667 | #define PWMP_ADDR 0xfffff502 | ||
| 668 | #define PWMP WORD_REF(PWMP_ADDR) | ||
| 669 | |||
| 670 | /* | ||
| 671 | * PWM Width Register | ||
| 672 | */ | ||
| 673 | #define PWMW_ADDR 0xfffff504 | ||
| 674 | #define PWMW WORD_REF(PWMW_ADDR) | ||
| 675 | |||
| 676 | /* | ||
| 677 | * PWM Counter Register | ||
| 678 | */ | ||
| 679 | #define PWMCNT_ADDR 0xfffff506 | ||
| 680 | #define PWMCNT WORD_REF(PWMCNT_ADDR) | ||
| 681 | |||
| 682 | /********** | ||
| 683 | * | ||
| 684 | * 0xFFFFF6xx -- General-Purpose Timers | ||
| 685 | * | ||
| 686 | **********/ | ||
| 687 | |||
| 688 | /* | ||
| 689 | * Timer Unit 1 and 2 Control Registers | ||
| 690 | */ | ||
| 691 | #define TCTL1_ADDR 0xfffff600 | ||
| 692 | #define TCTL1 WORD_REF(TCTL1_ADDR) | ||
| 693 | #define TCTL2_ADDR 0xfffff60c | ||
| 694 | #define TCTL2 WORD_REF(TCTL2_ADDR) | ||
| 695 | |||
| 696 | #define TCTL_TEN 0x0001 /* Timer Enable */ | ||
| 697 | #define TCTL_CLKSOURCE_MASK 0x000e /* Clock Source: */ | ||
| 698 | #define TCTL_CLKSOURCE_STOP 0x0000 /* Stop count (disabled) */ | ||
| 699 | #define TCTL_CLKSOURCE_SYSCLK 0x0002 /* SYSCLK to prescaler */ | ||
| 700 | #define TCTL_CLKSOURCE_SYSCLK_16 0x0004 /* SYSCLK/16 to prescaler */ | ||
| 701 | #define TCTL_CLKSOURCE_TIN 0x0006 /* TIN to prescaler */ | ||
| 702 | #define TCTL_CLKSOURCE_32KHZ 0x0008 /* 32kHz clock to prescaler */ | ||
| 703 | #define TCTL_IRQEN 0x0010 /* IRQ Enable */ | ||
| 704 | #define TCTL_OM 0x0020 /* Output Mode */ | ||
| 705 | #define TCTL_CAP_MASK 0x00c0 /* Capture Edge: */ | ||
| 706 | #define TCTL_CAP_RE 0x0040 /* Capture on rizing edge */ | ||
| 707 | #define TCTL_CAP_FE 0x0080 /* Capture on falling edge */ | ||
| 708 | #define TCTL_FRR 0x0010 /* Free-Run Mode */ | ||
| 709 | |||
| 710 | /* 'EZ328-compatible definitions */ | ||
| 711 | #define TCTL_ADDR TCTL1_ADDR | ||
| 712 | #define TCTL TCTL1 | ||
| 713 | |||
| 714 | /* | ||
| 715 | * Timer Unit 1 and 2 Prescaler Registers | ||
| 716 | */ | ||
| 717 | #define TPRER1_ADDR 0xfffff602 | ||
| 718 | #define TPRER1 WORD_REF(TPRER1_ADDR) | ||
| 719 | #define TPRER2_ADDR 0xfffff60e | ||
| 720 | #define TPRER2 WORD_REF(TPRER2_ADDR) | ||
| 721 | |||
| 722 | /* 'EZ328-compatible definitions */ | ||
| 723 | #define TPRER_ADDR TPRER1_ADDR | ||
| 724 | #define TPRER TPRER1 | ||
| 725 | |||
| 726 | /* | ||
| 727 | * Timer Unit 1 and 2 Compare Registers | ||
| 728 | */ | ||
| 729 | #define TCMP1_ADDR 0xfffff604 | ||
| 730 | #define TCMP1 WORD_REF(TCMP1_ADDR) | ||
| 731 | #define TCMP2_ADDR 0xfffff610 | ||
| 732 | #define TCMP2 WORD_REF(TCMP2_ADDR) | ||
| 733 | |||
| 734 | /* 'EZ328-compatible definitions */ | ||
| 735 | #define TCMP_ADDR TCMP1_ADDR | ||
| 736 | #define TCMP TCMP1 | ||
| 737 | |||
| 738 | /* | ||
| 739 | * Timer Unit 1 and 2 Capture Registers | ||
| 740 | */ | ||
| 741 | #define TCR1_ADDR 0xfffff606 | ||
| 742 | #define TCR1 WORD_REF(TCR1_ADDR) | ||
| 743 | #define TCR2_ADDR 0xfffff612 | ||
| 744 | #define TCR2 WORD_REF(TCR2_ADDR) | ||
| 745 | |||
| 746 | /* 'EZ328-compatible definitions */ | ||
| 747 | #define TCR_ADDR TCR1_ADDR | ||
| 748 | #define TCR TCR1 | ||
| 749 | |||
| 750 | /* | ||
| 751 | * Timer Unit 1 and 2 Counter Registers | ||
| 752 | */ | ||
| 753 | #define TCN1_ADDR 0xfffff608 | ||
| 754 | #define TCN1 WORD_REF(TCN1_ADDR) | ||
| 755 | #define TCN2_ADDR 0xfffff614 | ||
| 756 | #define TCN2 WORD_REF(TCN2_ADDR) | ||
| 757 | |||
| 758 | /* 'EZ328-compatible definitions */ | ||
| 759 | #define TCN_ADDR TCN1_ADDR | ||
| 760 | #define TCN TCN | ||
| 761 | |||
| 762 | /* | ||
| 763 | * Timer Unit 1 and 2 Status Registers | ||
| 764 | */ | ||
| 765 | #define TSTAT1_ADDR 0xfffff60a | ||
| 766 | #define TSTAT1 WORD_REF(TSTAT1_ADDR) | ||
| 767 | #define TSTAT2_ADDR 0xfffff616 | ||
| 768 | #define TSTAT2 WORD_REF(TSTAT2_ADDR) | ||
| 769 | |||
| 770 | #define TSTAT_COMP 0x0001 /* Compare Event occurred */ | ||
| 771 | #define TSTAT_CAPT 0x0001 /* Capture Event occurred */ | ||
| 772 | |||
| 773 | /* 'EZ328-compatible definitions */ | ||
| 774 | #define TSTAT_ADDR TSTAT1_ADDR | ||
| 775 | #define TSTAT TSTAT1 | ||
| 776 | |||
| 777 | /* | ||
| 778 | * Watchdog Compare Register | ||
| 779 | */ | ||
| 780 | #define WRR_ADDR 0xfffff61a | ||
| 781 | #define WRR WORD_REF(WRR_ADDR) | ||
| 782 | |||
| 783 | /* | ||
| 784 | * Watchdog Counter Register | ||
| 785 | */ | ||
| 786 | #define WCN_ADDR 0xfffff61c | ||
| 787 | #define WCN WORD_REF(WCN_ADDR) | ||
| 788 | |||
| 789 | /* | ||
| 790 | * Watchdog Control and Status Register | ||
| 791 | */ | ||
| 792 | #define WCSR_ADDR 0xfffff618 | ||
| 793 | #define WCSR WORD_REF(WCSR_ADDR) | ||
| 794 | |||
| 795 | #define WCSR_WDEN 0x0001 /* Watchdog Enable */ | ||
| 796 | #define WCSR_FI 0x0002 /* Forced Interrupt (instead of SW reset)*/ | ||
| 797 | #define WCSR_WRST 0x0004 /* Watchdog Reset */ | ||
| 798 | |||
| 799 | /********** | ||
| 800 | * | ||
| 801 | * 0xFFFFF7xx -- Serial Periferial Interface Slave (SPIS) | ||
| 802 | * | ||
| 803 | **********/ | ||
| 804 | |||
| 805 | /* | ||
| 806 | * SPI Slave Register | ||
| 807 | */ | ||
| 808 | #define SPISR_ADDR 0xfffff700 | ||
| 809 | #define SPISR WORD_REF(SPISR_ADDR) | ||
| 810 | |||
| 811 | #define SPISR_DATA_ADDR 0xfffff701 | ||
| 812 | #define SPISR_DATA BYTE_REF(SPISR_DATA_ADDR) | ||
| 813 | |||
| 814 | #define SPISR_DATA_MASK 0x00ff /* Shifted data from the external device */ | ||
| 815 | #define SPISR_DATA_SHIFT 0 | ||
| 816 | #define SPISR_SPISEN 0x0100 /* SPIS module enable */ | ||
| 817 | #define SPISR_POL 0x0200 /* SPSCLK polarity control */ | ||
| 818 | #define SPISR_PHA 0x0400 /* Phase relationship between SPSCLK & SPSRxD */ | ||
| 819 | #define SPISR_OVWR 0x0800 /* Data buffer has been overwritten */ | ||
| 820 | #define SPISR_DATARDY 0x1000 /* Data ready */ | ||
| 821 | #define SPISR_ENPOL 0x2000 /* Enable Polarity */ | ||
| 822 | #define SPISR_IRQEN 0x4000 /* SPIS IRQ Enable */ | ||
| 823 | #define SPISR_SPISIRQ 0x8000 /* SPIS IRQ posted */ | ||
| 824 | |||
| 825 | /********** | ||
| 826 | * | ||
| 827 | * 0xFFFFF8xx -- Serial Periferial Interface Master (SPIM) | ||
| 828 | * | ||
| 829 | **********/ | ||
| 830 | |||
| 831 | /* | ||
| 832 | * SPIM Data Register | ||
| 833 | */ | ||
| 834 | #define SPIMDATA_ADDR 0xfffff800 | ||
| 835 | #define SPIMDATA WORD_REF(SPIMDATA_ADDR) | ||
| 836 | |||
| 837 | /* | ||
| 838 | * SPIM Control/Status Register | ||
| 839 | */ | ||
| 840 | #define SPIMCONT_ADDR 0xfffff802 | ||
| 841 | #define SPIMCONT WORD_REF(SPIMCONT_ADDR) | ||
| 842 | |||
| 843 | #define SPIMCONT_BIT_COUNT_MASK 0x000f /* Transfer Length in Bytes */ | ||
| 844 | #define SPIMCONT_BIT_COUNT_SHIFT 0 | ||
| 845 | #define SPIMCONT_POL 0x0010 /* SPMCLK Signel Polarity */ | ||
| 846 | #define SPIMCONT_PHA 0x0020 /* Clock/Data phase relationship */ | ||
| 847 | #define SPIMCONT_IRQEN 0x0040 /* IRQ Enable */ | ||
| 848 | #define SPIMCONT_SPIMIRQ 0x0080 /* Interrupt Request */ | ||
| 849 | #define SPIMCONT_XCH 0x0100 /* Exchange */ | ||
| 850 | #define SPIMCONT_RSPIMEN 0x0200 /* Enable SPIM */ | ||
| 851 | #define SPIMCONT_DATA_RATE_MASK 0xe000 /* SPIM Data Rate */ | ||
| 852 | #define SPIMCONT_DATA_RATE_SHIFT 13 | ||
| 853 | |||
| 854 | /* 'EZ328-compatible definitions */ | ||
| 855 | #define SPIMCONT_IRQ SPIMCONT_SPIMIRQ | ||
| 856 | #define SPIMCONT_ENABLE SPIMCONT_SPIMEN | ||
| 857 | /********** | ||
| 858 | * | ||
| 859 | * 0xFFFFF9xx -- UART | ||
| 860 | * | ||
| 861 | **********/ | ||
| 862 | |||
| 863 | /* | ||
| 864 | * UART Status/Control Register | ||
| 865 | */ | ||
| 866 | #define USTCNT_ADDR 0xfffff900 | ||
| 867 | #define USTCNT WORD_REF(USTCNT_ADDR) | ||
| 868 | |||
| 869 | #define USTCNT_TXAVAILEN 0x0001 /* Transmitter Available Int Enable */ | ||
| 870 | #define USTCNT_TXHALFEN 0x0002 /* Transmitter Half Empty Int Enable */ | ||
| 871 | #define USTCNT_TXEMPTYEN 0x0004 /* Transmitter Empty Int Enable */ | ||
| 872 | #define USTCNT_RXREADYEN 0x0008 /* Receiver Ready Interrupt Enable */ | ||
| 873 | #define USTCNT_RXHALFEN 0x0010 /* Receiver Half-Full Int Enable */ | ||
| 874 | #define USTCNT_RXFULLEN 0x0020 /* Receiver Full Interrupt Enable */ | ||
| 875 | #define USTCNT_CTSDELTAEN 0x0040 /* CTS Delta Interrupt Enable */ | ||
| 876 | #define USTCNT_GPIODELTAEN 0x0080 /* Old Data Interrupt Enable */ | ||
| 877 | #define USTCNT_8_7 0x0100 /* Eight or seven-bit transmission */ | ||
| 878 | #define USTCNT_STOP 0x0200 /* Stop bit transmission */ | ||
| 879 | #define USTCNT_ODD_EVEN 0x0400 /* Odd Parity */ | ||
| 880 | #define USTCNT_PARITYEN 0x0800 /* Parity Enable */ | ||
| 881 | #define USTCNT_CLKMODE 0x1000 /* Clock Mode Select */ | ||
| 882 | #define USTCNT_TXEN 0x2000 /* Transmitter Enable */ | ||
| 883 | #define USTCNT_RXEN 0x4000 /* Receiver Enable */ | ||
| 884 | #define USTCNT_UARTEN 0x8000 /* UART Enable */ | ||
| 885 | |||
| 886 | /* 'EZ328-compatible definitions */ | ||
| 887 | #define USTCNT_TXAE USTCNT_TXAVAILEN | ||
| 888 | #define USTCNT_TXHE USTCNT_TXHALFEN | ||
| 889 | #define USTCNT_TXEE USTCNT_TXEMPTYEN | ||
| 890 | #define USTCNT_RXRE USTCNT_RXREADYEN | ||
| 891 | #define USTCNT_RXHE USTCNT_RXHALFEN | ||
| 892 | #define USTCNT_RXFE USTCNT_RXFULLEN | ||
| 893 | #define USTCNT_CTSD USTCNT_CTSDELTAEN | ||
| 894 | #define USTCNT_ODD USTCNT_ODD_EVEN | ||
| 895 | #define USTCNT_PEN USTCNT_PARITYEN | ||
| 896 | #define USTCNT_CLKM USTCNT_CLKMODE | ||
| 897 | #define USTCNT_UEN USTCNT_UARTEN | ||
| 898 | |||
| 899 | /* | ||
| 900 | * UART Baud Control Register | ||
| 901 | */ | ||
| 902 | #define UBAUD_ADDR 0xfffff902 | ||
| 903 | #define UBAUD WORD_REF(UBAUD_ADDR) | ||
| 904 | |||
| 905 | #define UBAUD_PRESCALER_MASK 0x003f /* Actual divisor is 65 - PRESCALER */ | ||
| 906 | #define UBAUD_PRESCALER_SHIFT 0 | ||
| 907 | #define UBAUD_DIVIDE_MASK 0x0700 /* Baud Rate freq. divizor */ | ||
| 908 | #define UBAUD_DIVIDE_SHIFT 8 | ||
| 909 | #define UBAUD_BAUD_SRC 0x0800 /* Baud Rate Source */ | ||
| 910 | #define UBAUD_GPIOSRC 0x1000 /* GPIO source */ | ||
| 911 | #define UBAUD_GPIODIR 0x2000 /* GPIO Direction */ | ||
| 912 | #define UBAUD_GPIO 0x4000 /* Current GPIO pin status */ | ||
| 913 | #define UBAUD_GPIODELTA 0x8000 /* GPIO pin value changed */ | ||
| 914 | |||
| 915 | /* | ||
| 916 | * UART Receiver Register | ||
| 917 | */ | ||
| 918 | #define URX_ADDR 0xfffff904 | ||
| 919 | #define URX WORD_REF(URX_ADDR) | ||
| 920 | |||
| 921 | #define URX_RXDATA_ADDR 0xfffff905 | ||
| 922 | #define URX_RXDATA BYTE_REF(URX_RXDATA_ADDR) | ||
| 923 | |||
| 924 | #define URX_RXDATA_MASK 0x00ff /* Received data */ | ||
| 925 | #define URX_RXDATA_SHIFT 0 | ||
| 926 | #define URX_PARITY_ERROR 0x0100 /* Parity Error */ | ||
| 927 | #define URX_BREAK 0x0200 /* Break Detected */ | ||
| 928 | #define URX_FRAME_ERROR 0x0400 /* Framing Error */ | ||
| 929 | #define URX_OVRUN 0x0800 /* Serial Overrun */ | ||
| 930 | #define URX_DATA_READY 0x2000 /* Data Ready (FIFO not empty) */ | ||
| 931 | #define URX_FIFO_HALF 0x4000 /* FIFO is Half-Full */ | ||
| 932 | #define URX_FIFO_FULL 0x8000 /* FIFO is Full */ | ||
| 933 | |||
| 934 | /* | ||
| 935 | * UART Transmitter Register | ||
| 936 | */ | ||
| 937 | #define UTX_ADDR 0xfffff906 | ||
| 938 | #define UTX WORD_REF(UTX_ADDR) | ||
| 939 | |||
| 940 | #define UTX_TXDATA_ADDR 0xfffff907 | ||
| 941 | #define UTX_TXDATA BYTE_REF(UTX_TXDATA_ADDR) | ||
| 942 | |||
| 943 | #define UTX_TXDATA_MASK 0x00ff /* Data to be transmitted */ | ||
| 944 | #define UTX_TXDATA_SHIFT 0 | ||
| 945 | #define UTX_CTS_DELTA 0x0100 /* CTS changed */ | ||
| 946 | #define UTX_CTS_STATUS 0x0200 /* CTS State */ | ||
| 947 | #define UTX_IGNORE_CTS 0x0800 /* Ignore CTS */ | ||
| 948 | #define UTX_SEND_BREAK 0x1000 /* Send a BREAK */ | ||
| 949 | #define UTX_TX_AVAIL 0x2000 /* Transmit FIFO has a slot available */ | ||
| 950 | #define UTX_FIFO_HALF 0x4000 /* Transmit FIFO is half empty */ | ||
| 951 | #define UTX_FIFO_EMPTY 0x8000 /* Transmit FIFO is empty */ | ||
| 952 | |||
| 953 | /* 'EZ328-compatible definitions */ | ||
| 954 | #define UTX_CTS_STAT UTX_CTS_STATUS | ||
| 955 | #define UTX_NOCTS UTX_IGNORE_CTS | ||
| 956 | |||
| 957 | /* | ||
| 958 | * UART Miscellaneous Register | ||
| 959 | */ | ||
| 960 | #define UMISC_ADDR 0xfffff908 | ||
| 961 | #define UMISC WORD_REF(UMISC_ADDR) | ||
| 962 | |||
| 963 | #define UMISC_TX_POL 0x0004 /* Transmit Polarity */ | ||
| 964 | #define UMISC_RX_POL 0x0008 /* Receive Polarity */ | ||
| 965 | #define UMISC_IRDA_LOOP 0x0010 /* IrDA Loopback Enable */ | ||
| 966 | #define UMISC_IRDA_EN 0x0020 /* Infra-Red Enable */ | ||
| 967 | #define UMISC_RTS 0x0040 /* Set RTS status */ | ||
| 968 | #define UMISC_RTSCONT 0x0080 /* Choose RTS control */ | ||
| 969 | #define UMISC_LOOP 0x1000 /* Serial Loopback Enable */ | ||
| 970 | #define UMISC_FORCE_PERR 0x2000 /* Force Parity Error */ | ||
| 971 | #define UMISC_CLKSRC 0x4000 /* Clock Source */ | ||
| 972 | |||
| 973 | |||
| 974 | /* generalization of uart control registers to support multiple ports: */ | ||
| 975 | typedef volatile struct { | ||
| 976 | volatile unsigned short int ustcnt; | ||
| 977 | volatile unsigned short int ubaud; | ||
| 978 | union { | ||
| 979 | volatile unsigned short int w; | ||
| 980 | struct { | ||
| 981 | volatile unsigned char status; | ||
| 982 | volatile unsigned char rxdata; | ||
| 983 | } b; | ||
| 984 | } urx; | ||
| 985 | union { | ||
| 986 | volatile unsigned short int w; | ||
| 987 | struct { | ||
| 988 | volatile unsigned char status; | ||
| 989 | volatile unsigned char txdata; | ||
| 990 | } b; | ||
| 991 | } utx; | ||
| 992 | volatile unsigned short int umisc; | ||
| 993 | volatile unsigned short int pad1; | ||
| 994 | volatile unsigned short int pad2; | ||
| 995 | volatile unsigned short int pad3; | ||
| 996 | } __attribute__((packed)) m68328_uart; | ||
| 997 | |||
| 998 | |||
| 999 | /********** | ||
| 1000 | * | ||
| 1001 | * 0xFFFFFAxx -- LCD Controller | ||
| 1002 | * | ||
| 1003 | **********/ | ||
| 1004 | |||
| 1005 | /* | ||
| 1006 | * LCD Screen Starting Address Register | ||
| 1007 | */ | ||
| 1008 | #define LSSA_ADDR 0xfffffa00 | ||
| 1009 | #define LSSA LONG_REF(LSSA_ADDR) | ||
| 1010 | |||
| 1011 | #define LSSA_SSA_MASK 0xfffffffe /* Bit 0 is reserved */ | ||
| 1012 | |||
| 1013 | /* | ||
| 1014 | * LCD Virtual Page Width Register | ||
| 1015 | */ | ||
| 1016 | #define LVPW_ADDR 0xfffffa05 | ||
| 1017 | #define LVPW BYTE_REF(LVPW_ADDR) | ||
| 1018 | |||
| 1019 | /* | ||
| 1020 | * LCD Screen Width Register (not compatible with 'EZ328 !!!) | ||
| 1021 | */ | ||
| 1022 | #define LXMAX_ADDR 0xfffffa08 | ||
| 1023 | #define LXMAX WORD_REF(LXMAX_ADDR) | ||
| 1024 | |||
| 1025 | #define LXMAX_XM_MASK 0x02ff /* Bits 0-3 are reserved */ | ||
| 1026 | |||
| 1027 | /* | ||
| 1028 | * LCD Screen Height Register | ||
| 1029 | */ | ||
| 1030 | #define LYMAX_ADDR 0xfffffa0a | ||
| 1031 | #define LYMAX WORD_REF(LYMAX_ADDR) | ||
| 1032 | |||
| 1033 | #define LYMAX_YM_MASK 0x02ff /* Bits 10-15 are reserved */ | ||
| 1034 | |||
| 1035 | /* | ||
| 1036 | * LCD Cursor X Position Register | ||
| 1037 | */ | ||
| 1038 | #define LCXP_ADDR 0xfffffa18 | ||
| 1039 | #define LCXP WORD_REF(LCXP_ADDR) | ||
| 1040 | |||
| 1041 | #define LCXP_CC_MASK 0xc000 /* Cursor Control */ | ||
| 1042 | #define LCXP_CC_TRAMSPARENT 0x0000 | ||
| 1043 | #define LCXP_CC_BLACK 0x4000 | ||
| 1044 | #define LCXP_CC_REVERSED 0x8000 | ||
| 1045 | #define LCXP_CC_WHITE 0xc000 | ||
| 1046 | #define LCXP_CXP_MASK 0x02ff /* Cursor X position */ | ||
| 1047 | |||
| 1048 | /* | ||
| 1049 | * LCD Cursor Y Position Register | ||
| 1050 | */ | ||
| 1051 | #define LCYP_ADDR 0xfffffa1a | ||
| 1052 | #define LCYP WORD_REF(LCYP_ADDR) | ||
| 1053 | |||
| 1054 | #define LCYP_CYP_MASK 0x01ff /* Cursor Y Position */ | ||
| 1055 | |||
| 1056 | /* | ||
| 1057 | * LCD Cursor Width and Heigth Register | ||
| 1058 | */ | ||
| 1059 | #define LCWCH_ADDR 0xfffffa1c | ||
| 1060 | #define LCWCH WORD_REF(LCWCH_ADDR) | ||
| 1061 | |||
| 1062 | #define LCWCH_CH_MASK 0x001f /* Cursor Height */ | ||
| 1063 | #define LCWCH_CH_SHIFT 0 | ||
| 1064 | #define LCWCH_CW_MASK 0x1f00 /* Cursor Width */ | ||
| 1065 | #define LCWCH_CW_SHIFT 8 | ||
| 1066 | |||
| 1067 | /* | ||
| 1068 | * LCD Blink Control Register | ||
| 1069 | */ | ||
| 1070 | #define LBLKC_ADDR 0xfffffa1f | ||
| 1071 | #define LBLKC BYTE_REF(LBLKC_ADDR) | ||
| 1072 | |||
| 1073 | #define LBLKC_BD_MASK 0x7f /* Blink Divisor */ | ||
| 1074 | #define LBLKC_BD_SHIFT 0 | ||
| 1075 | #define LBLKC_BKEN 0x80 /* Blink Enabled */ | ||
| 1076 | |||
| 1077 | /* | ||
| 1078 | * LCD Panel Interface Configuration Register | ||
| 1079 | */ | ||
| 1080 | #define LPICF_ADDR 0xfffffa20 | ||
| 1081 | #define LPICF BYTE_REF(LPICF_ADDR) | ||
| 1082 | |||
| 1083 | #define LPICF_GS_MASK 0x01 /* Gray-Scale Mode */ | ||
| 1084 | #define LPICF_GS_BW 0x00 | ||
| 1085 | #define LPICF_GS_GRAY_4 0x01 | ||
| 1086 | #define LPICF_PBSIZ_MASK 0x06 /* Panel Bus Width */ | ||
| 1087 | #define LPICF_PBSIZ_1 0x00 | ||
| 1088 | #define LPICF_PBSIZ_2 0x02 | ||
| 1089 | #define LPICF_PBSIZ_4 0x04 | ||
| 1090 | |||
| 1091 | /* | ||
| 1092 | * LCD Polarity Configuration Register | ||
| 1093 | */ | ||
| 1094 | #define LPOLCF_ADDR 0xfffffa21 | ||
| 1095 | #define LPOLCF BYTE_REF(LPOLCF_ADDR) | ||
| 1096 | |||
| 1097 | #define LPOLCF_PIXPOL 0x01 /* Pixel Polarity */ | ||
| 1098 | #define LPOLCF_LPPOL 0x02 /* Line Pulse Polarity */ | ||
| 1099 | #define LPOLCF_FLMPOL 0x04 /* Frame Marker Polarity */ | ||
| 1100 | #define LPOLCF_LCKPOL 0x08 /* LCD Shift Lock Polarity */ | ||
| 1101 | |||
| 1102 | /* | ||
| 1103 | * LACD (LCD Alternate Crystal Direction) Rate Control Register | ||
| 1104 | */ | ||
| 1105 | #define LACDRC_ADDR 0xfffffa23 | ||
| 1106 | #define LACDRC BYTE_REF(LACDRC_ADDR) | ||
| 1107 | |||
| 1108 | #define LACDRC_ACD_MASK 0x0f /* Alternate Crystal Direction Control */ | ||
| 1109 | #define LACDRC_ACD_SHIFT 0 | ||
| 1110 | |||
| 1111 | /* | ||
| 1112 | * LCD Pixel Clock Divider Register | ||
| 1113 | */ | ||
| 1114 | #define LPXCD_ADDR 0xfffffa25 | ||
| 1115 | #define LPXCD BYTE_REF(LPXCD_ADDR) | ||
| 1116 | |||
| 1117 | #define LPXCD_PCD_MASK 0x3f /* Pixel Clock Divider */ | ||
| 1118 | #define LPXCD_PCD_SHIFT 0 | ||
| 1119 | |||
| 1120 | /* | ||
| 1121 | * LCD Clocking Control Register | ||
| 1122 | */ | ||
| 1123 | #define LCKCON_ADDR 0xfffffa27 | ||
| 1124 | #define LCKCON BYTE_REF(LCKCON_ADDR) | ||
| 1125 | |||
| 1126 | #define LCKCON_PCDS 0x01 /* Pixel Clock Divider Source Select */ | ||
| 1127 | #define LCKCON_DWIDTH 0x02 /* Display Memory Width */ | ||
| 1128 | #define LCKCON_DWS_MASK 0x3c /* Display Wait-State */ | ||
| 1129 | #define LCKCON_DWS_SHIFT 2 | ||
| 1130 | #define LCKCON_DMA16 0x40 /* DMA burst length */ | ||
| 1131 | #define LCKCON_LCDON 0x80 /* Enable LCD Controller */ | ||
| 1132 | |||
| 1133 | /* 'EZ328-compatible definitions */ | ||
| 1134 | #define LCKCON_DW_MASK LCKCON_DWS_MASK | ||
| 1135 | #define LCKCON_DW_SHIFT LCKCON_DWS_SHIFT | ||
| 1136 | |||
| 1137 | /* | ||
| 1138 | * LCD Last Buffer Address Register | ||
| 1139 | */ | ||
| 1140 | #define LLBAR_ADDR 0xfffffa29 | ||
| 1141 | #define LLBAR BYTE_REF(LLBAR_ADDR) | ||
| 1142 | |||
| 1143 | #define LLBAR_LBAR_MASK 0x7f /* Number of memory words to fill 1 line */ | ||
| 1144 | #define LLBAR_LBAR_SHIFT 0 | ||
| 1145 | |||
| 1146 | /* | ||
| 1147 | * LCD Octet Terminal Count Register | ||
| 1148 | */ | ||
| 1149 | #define LOTCR_ADDR 0xfffffa2b | ||
| 1150 | #define LOTCR BYTE_REF(LOTCR_ADDR) | ||
| 1151 | |||
| 1152 | /* | ||
| 1153 | * LCD Panning Offset Register | ||
| 1154 | */ | ||
| 1155 | #define LPOSR_ADDR 0xfffffa2d | ||
| 1156 | #define LPOSR BYTE_REF(LPOSR_ADDR) | ||
| 1157 | |||
| 1158 | #define LPOSR_BOS 0x08 /* Byte offset (for B/W mode only */ | ||
| 1159 | #define LPOSR_POS_MASK 0x07 /* Pixel Offset Code */ | ||
| 1160 | #define LPOSR_POS_SHIFT 0 | ||
| 1161 | |||
| 1162 | /* | ||
| 1163 | * LCD Frame Rate Control Modulation Register | ||
| 1164 | */ | ||
| 1165 | #define LFRCM_ADDR 0xfffffa31 | ||
| 1166 | #define LFRCM BYTE_REF(LFRCM_ADDR) | ||
| 1167 | |||
| 1168 | #define LFRCM_YMOD_MASK 0x0f /* Vertical Modulation */ | ||
| 1169 | #define LFRCM_YMOD_SHIFT 0 | ||
| 1170 | #define LFRCM_XMOD_MASK 0xf0 /* Horizontal Modulation */ | ||
| 1171 | #define LFRCM_XMOD_SHIFT 4 | ||
| 1172 | |||
| 1173 | /* | ||
| 1174 | * LCD Gray Palette Mapping Register | ||
| 1175 | */ | ||
| 1176 | #define LGPMR_ADDR 0xfffffa32 | ||
| 1177 | #define LGPMR WORD_REF(LGPMR_ADDR) | ||
| 1178 | |||
| 1179 | #define LGPMR_GLEVEL3_MASK 0x000f | ||
| 1180 | #define LGPMR_GLEVEL3_SHIFT 0 | ||
| 1181 | #define LGPMR_GLEVEL2_MASK 0x00f0 | ||
| 1182 | #define LGPMR_GLEVEL2_SHIFT 4 | ||
| 1183 | #define LGPMR_GLEVEL0_MASK 0x0f00 | ||
| 1184 | #define LGPMR_GLEVEL0_SHIFT 8 | ||
| 1185 | #define LGPMR_GLEVEL1_MASK 0xf000 | ||
| 1186 | #define LGPMR_GLEVEL1_SHIFT 12 | ||
| 1187 | |||
| 1188 | /********** | ||
| 1189 | * | ||
| 1190 | * 0xFFFFFBxx -- Real-Time Clock (RTC) | ||
| 1191 | * | ||
| 1192 | **********/ | ||
| 1193 | |||
| 1194 | /* | ||
| 1195 | * RTC Hours Minutes and Seconds Register | ||
| 1196 | */ | ||
| 1197 | #define RTCTIME_ADDR 0xfffffb00 | ||
| 1198 | #define RTCTIME LONG_REF(RTCTIME_ADDR) | ||
| 1199 | |||
| 1200 | #define RTCTIME_SECONDS_MASK 0x0000003f /* Seconds */ | ||
| 1201 | #define RTCTIME_SECONDS_SHIFT 0 | ||
| 1202 | #define RTCTIME_MINUTES_MASK 0x003f0000 /* Minutes */ | ||
| 1203 | #define RTCTIME_MINUTES_SHIFT 16 | ||
| 1204 | #define RTCTIME_HOURS_MASK 0x1f000000 /* Hours */ | ||
| 1205 | #define RTCTIME_HOURS_SHIFT 24 | ||
| 1206 | |||
| 1207 | /* | ||
| 1208 | * RTC Alarm Register | ||
| 1209 | */ | ||
| 1210 | #define RTCALRM_ADDR 0xfffffb04 | ||
| 1211 | #define RTCALRM LONG_REF(RTCALRM_ADDR) | ||
| 1212 | |||
| 1213 | #define RTCALRM_SECONDS_MASK 0x0000003f /* Seconds */ | ||
| 1214 | #define RTCALRM_SECONDS_SHIFT 0 | ||
| 1215 | #define RTCALRM_MINUTES_MASK 0x003f0000 /* Minutes */ | ||
| 1216 | #define RTCALRM_MINUTES_SHIFT 16 | ||
| 1217 | #define RTCALRM_HOURS_MASK 0x1f000000 /* Hours */ | ||
| 1218 | #define RTCALRM_HOURS_SHIFT 24 | ||
| 1219 | |||
| 1220 | /* | ||
| 1221 | * RTC Control Register | ||
| 1222 | */ | ||
| 1223 | #define RTCCTL_ADDR 0xfffffb0c | ||
| 1224 | #define RTCCTL WORD_REF(RTCCTL_ADDR) | ||
| 1225 | |||
| 1226 | #define RTCCTL_384 0x0020 /* Crystal Selection */ | ||
| 1227 | #define RTCCTL_ENABLE 0x0080 /* RTC Enable */ | ||
| 1228 | |||
| 1229 | /* 'EZ328-compatible definitions */ | ||
| 1230 | #define RTCCTL_XTL RTCCTL_384 | ||
| 1231 | #define RTCCTL_EN RTCCTL_ENABLE | ||
| 1232 | |||
| 1233 | /* | ||
| 1234 | * RTC Interrupt Status Register | ||
| 1235 | */ | ||
| 1236 | #define RTCISR_ADDR 0xfffffb0e | ||
| 1237 | #define RTCISR WORD_REF(RTCISR_ADDR) | ||
| 1238 | |||
| 1239 | #define RTCISR_SW 0x0001 /* Stopwatch timed out */ | ||
| 1240 | #define RTCISR_MIN 0x0002 /* 1-minute interrupt has occurred */ | ||
| 1241 | #define RTCISR_ALM 0x0004 /* Alarm interrupt has occurred */ | ||
| 1242 | #define RTCISR_DAY 0x0008 /* 24-hour rollover interrupt has occurred */ | ||
| 1243 | #define RTCISR_1HZ 0x0010 /* 1Hz interrupt has occurred */ | ||
| 1244 | |||
| 1245 | /* | ||
| 1246 | * RTC Interrupt Enable Register | ||
| 1247 | */ | ||
| 1248 | #define RTCIENR_ADDR 0xfffffb10 | ||
| 1249 | #define RTCIENR WORD_REF(RTCIENR_ADDR) | ||
| 1250 | |||
| 1251 | #define RTCIENR_SW 0x0001 /* Stopwatch interrupt enable */ | ||
| 1252 | #define RTCIENR_MIN 0x0002 /* 1-minute interrupt enable */ | ||
| 1253 | #define RTCIENR_ALM 0x0004 /* Alarm interrupt enable */ | ||
| 1254 | #define RTCIENR_DAY 0x0008 /* 24-hour rollover interrupt enable */ | ||
| 1255 | #define RTCIENR_1HZ 0x0010 /* 1Hz interrupt enable */ | ||
| 1256 | |||
| 1257 | /* | ||
| 1258 | * Stopwatch Minutes Register | ||
| 1259 | */ | ||
| 1260 | #define STPWCH_ADDR 0xfffffb12 | ||
| 1261 | #define STPWCH WORD_REF(STPWCH) | ||
| 1262 | |||
| 1263 | #define STPWCH_CNT_MASK 0x00ff /* Stopwatch countdown value */ | ||
| 1264 | #define SPTWCH_CNT_SHIFT 0 | ||
| 1265 | |||
| 1266 | #endif /* _MC68328_H_ */ | ||
diff --git a/arch/m68knommu/include/asm/MC68332.h b/arch/m68knommu/include/asm/MC68332.h deleted file mode 100644 index 6bb8f02685a2..000000000000 --- a/arch/m68knommu/include/asm/MC68332.h +++ /dev/null | |||
| @@ -1,152 +0,0 @@ | |||
| 1 | |||
| 2 | /* include/asm-m68knommu/MC68332.h: '332 control registers | ||
| 3 | * | ||
| 4 | * Copyright (C) 1998 Kenneth Albanowski <kjahds@kjahds.com>, | ||
| 5 | * | ||
| 6 | */ | ||
| 7 | |||
| 8 | #ifndef _MC68332_H_ | ||
| 9 | #define _MC68332_H_ | ||
| 10 | |||
| 11 | #define BYTE_REF(addr) (*((volatile unsigned char*)addr)) | ||
| 12 | #define WORD_REF(addr) (*((volatile unsigned short*)addr)) | ||
| 13 | |||
| 14 | #define PORTE_ADDR 0xfffa11 | ||
| 15 | #define PORTE BYTE_REF(PORTE_ADDR) | ||
| 16 | #define DDRE_ADDR 0xfffa15 | ||
| 17 | #define DDRE BYTE_REF(DDRE_ADDR) | ||
| 18 | #define PEPAR_ADDR 0xfffa17 | ||
| 19 | #define PEPAR BYTE_REF(PEPAR_ADDR) | ||
| 20 | |||
| 21 | #define PORTF_ADDR 0xfffa19 | ||
| 22 | #define PORTF BYTE_REF(PORTF_ADDR) | ||
| 23 | #define DDRF_ADDR 0xfffa1d | ||
| 24 | #define DDRF BYTE_REF(DDRF_ADDR) | ||
| 25 | #define PFPAR_ADDR 0xfffa1f | ||
| 26 | #define PFPAR BYTE_REF(PFPAR_ADDR) | ||
| 27 | |||
| 28 | #define PORTQS_ADDR 0xfffc15 | ||
| 29 | #define PORTQS BYTE_REF(PORTQS_ADDR) | ||
| 30 | #define DDRQS_ADDR 0xfffc17 | ||
| 31 | #define DDRQS BYTE_REF(DDRQS_ADDR) | ||
| 32 | #define PQSPAR_ADDR 0xfffc16 | ||
| 33 | #define PQSPAR BYTE_REF(PQSPAR_ADDR) | ||
| 34 | |||
| 35 | #define CSPAR0_ADDR 0xFFFA44 | ||
| 36 | #define CSPAR0 WORD_REF(CSPAR0_ADDR) | ||
| 37 | #define CSPAR1_ADDR 0xFFFA46 | ||
| 38 | #define CSPAR1 WORD_REF(CSPAR1_ADDR) | ||
| 39 | #define CSARBT_ADDR 0xFFFA48 | ||
| 40 | #define CSARBT WORD_REF(CSARBT_ADDR) | ||
| 41 | #define CSOPBT_ADDR 0xFFFA4A | ||
| 42 | #define CSOPBT WORD_REF(CSOPBT_ADDR) | ||
| 43 | #define CSBAR0_ADDR 0xFFFA4C | ||
| 44 | #define CSBAR0 WORD_REF(CSBAR0_ADDR) | ||
| 45 | #define CSOR0_ADDR 0xFFFA4E | ||
| 46 | #define CSOR0 WORD_REF(CSOR0_ADDR) | ||
| 47 | #define CSBAR1_ADDR 0xFFFA50 | ||
| 48 | #define CSBAR1 WORD_REF(CSBAR1_ADDR) | ||
| 49 | #define CSOR1_ADDR 0xFFFA52 | ||
| 50 | #define CSOR1 WORD_REF(CSOR1_ADDR) | ||
| 51 | #define CSBAR2_ADDR 0xFFFA54 | ||
| 52 | #define CSBAR2 WORD_REF(CSBAR2_ADDR) | ||
| 53 | #define CSOR2_ADDR 0xFFFA56 | ||
| 54 | #define CSOR2 WORD_REF(CSOR2_ADDR) | ||
| 55 | #define CSBAR3_ADDR 0xFFFA58 | ||
| 56 | #define CSBAR3 WORD_REF(CSBAR3_ADDR) | ||
| 57 | #define CSOR3_ADDR 0xFFFA5A | ||
| 58 | #define CSOR3 WORD_REF(CSOR3_ADDR) | ||
| 59 | #define CSBAR4_ADDR 0xFFFA5C | ||
| 60 | #define CSBAR4 WORD_REF(CSBAR4_ADDR) | ||
| 61 | #define CSOR4_ADDR 0xFFFA5E | ||
| 62 | #define CSOR4 WORD_REF(CSOR4_ADDR) | ||
| 63 | #define CSBAR5_ADDR 0xFFFA60 | ||
| 64 | #define CSBAR5 WORD_REF(CSBAR5_ADDR) | ||
| 65 | #define CSOR5_ADDR 0xFFFA62 | ||
| 66 | #define CSOR5 WORD_REF(CSOR5_ADDR) | ||
| 67 | #define CSBAR6_ADDR 0xFFFA64 | ||
| 68 | #define CSBAR6 WORD_REF(CSBAR6_ADDR) | ||
| 69 | #define CSOR6_ADDR 0xFFFA66 | ||
| 70 | #define CSOR6 WORD_REF(CSOR6_ADDR) | ||
| 71 | #define CSBAR7_ADDR 0xFFFA68 | ||
| 72 | #define CSBAR7 WORD_REF(CSBAR7_ADDR) | ||
| 73 | #define CSOR7_ADDR 0xFFFA6A | ||
| 74 | #define CSOR7 WORD_REF(CSOR7_ADDR) | ||
| 75 | #define CSBAR8_ADDR 0xFFFA6C | ||
| 76 | #define CSBAR8 WORD_REF(CSBAR8_ADDR) | ||
| 77 | #define CSOR8_ADDR 0xFFFA6E | ||
| 78 | #define CSOR8 WORD_REF(CSOR8_ADDR) | ||
| 79 | #define CSBAR9_ADDR 0xFFFA70 | ||
| 80 | #define CSBAR9 WORD_REF(CSBAR9_ADDR) | ||
| 81 | #define CSOR9_ADDR 0xFFFA72 | ||
| 82 | #define CSOR9 WORD_REF(CSOR9_ADDR) | ||
| 83 | #define CSBAR10_ADDR 0xFFFA74 | ||
| 84 | #define CSBAR10 WORD_REF(CSBAR10_ADDR) | ||
| 85 | #define CSOR10_ADDR 0xFFFA76 | ||
| 86 | #define CSOR10 WORD_REF(CSOR10_ADDR) | ||
| 87 | |||
| 88 | #define CSOR_MODE_ASYNC 0x0000 | ||
| 89 | #define CSOR_MODE_SYNC 0x8000 | ||
| 90 | #define CSOR_MODE_MASK 0x8000 | ||
| 91 | #define CSOR_BYTE_DISABLE 0x0000 | ||
| 92 | #define CSOR_BYTE_UPPER 0x4000 | ||
| 93 | #define CSOR_BYTE_LOWER 0x2000 | ||
| 94 | #define CSOR_BYTE_BOTH 0x6000 | ||
| 95 | #define CSOR_BYTE_MASK 0x6000 | ||
| 96 | #define CSOR_RW_RSVD 0x0000 | ||
| 97 | #define CSOR_RW_READ 0x0800 | ||
| 98 | #define CSOR_RW_WRITE 0x1000 | ||
| 99 | #define CSOR_RW_BOTH 0x1800 | ||
| 100 | #define CSOR_RW_MASK 0x1800 | ||
| 101 | #define CSOR_STROBE_DS 0x0400 | ||
| 102 | #define CSOR_STROBE_AS 0x0000 | ||
| 103 | #define CSOR_STROBE_MASK 0x0400 | ||
| 104 | #define CSOR_DSACK_WAIT(x) (wait << 6) | ||
| 105 | #define CSOR_DSACK_FTERM (14 << 6) | ||
| 106 | #define CSOR_DSACK_EXTERNAL (15 << 6) | ||
| 107 | #define CSOR_DSACK_MASK 0x03c0 | ||
| 108 | #define CSOR_SPACE_CPU 0x0000 | ||
| 109 | #define CSOR_SPACE_USER 0x0010 | ||
| 110 | #define CSOR_SPACE_SU 0x0020 | ||
| 111 | #define CSOR_SPACE_BOTH 0x0030 | ||
| 112 | #define CSOR_SPACE_MASK 0x0030 | ||
| 113 | #define CSOR_IPL_ALL 0x0000 | ||
| 114 | #define CSOR_IPL_PRIORITY(x) (x << 1) | ||
| 115 | #define CSOR_IPL_MASK 0x000e | ||
| 116 | #define CSOR_AVEC_ON 0x0001 | ||
| 117 | #define CSOR_AVEC_OFF 0x0000 | ||
| 118 | #define CSOR_AVEC_MASK 0x0001 | ||
| 119 | |||
| 120 | #define CSBAR_ADDR(x) ((addr >> 11) << 3) | ||
| 121 | #define CSBAR_ADDR_MASK 0xfff8 | ||
| 122 | #define CSBAR_BLKSIZE_2K 0x0000 | ||
| 123 | #define CSBAR_BLKSIZE_8K 0x0001 | ||
| 124 | #define CSBAR_BLKSIZE_16K 0x0002 | ||
| 125 | #define CSBAR_BLKSIZE_64K 0x0003 | ||
| 126 | #define CSBAR_BLKSIZE_128K 0x0004 | ||
| 127 | #define CSBAR_BLKSIZE_256K 0x0005 | ||
| 128 | #define CSBAR_BLKSIZE_512K 0x0006 | ||
| 129 | #define CSBAR_BLKSIZE_1M 0x0007 | ||
| 130 | #define CSBAR_BLKSIZE_MASK 0x0007 | ||
| 131 | |||
| 132 | #define CSPAR_DISC 0 | ||
| 133 | #define CSPAR_ALT 1 | ||
| 134 | #define CSPAR_CS8 2 | ||
| 135 | #define CSPAR_CS16 3 | ||
| 136 | #define CSPAR_MASK 3 | ||
| 137 | |||
| 138 | #define CSPAR0_CSBOOT(x) (x << 0) | ||
| 139 | #define CSPAR0_CS0(x) (x << 2) | ||
| 140 | #define CSPAR0_CS1(x) (x << 4) | ||
| 141 | #define CSPAR0_CS2(x) (x << 6) | ||
| 142 | #define CSPAR0_CS3(x) (x << 8) | ||
| 143 | #define CSPAR0_CS4(x) (x << 10) | ||
| 144 | #define CSPAR0_CS5(x) (x << 12) | ||
| 145 | |||
| 146 | #define CSPAR1_CS6(x) (x << 0) | ||
| 147 | #define CSPAR1_CS7(x) (x << 2) | ||
| 148 | #define CSPAR1_CS8(x) (x << 4) | ||
| 149 | #define CSPAR1_CS9(x) (x << 6) | ||
| 150 | #define CSPAR1_CS10(x) (x << 8) | ||
| 151 | |||
| 152 | #endif | ||
diff --git a/arch/m68knommu/include/asm/MC68EZ328.h b/arch/m68knommu/include/asm/MC68EZ328.h deleted file mode 100644 index 69b7f9139e5e..000000000000 --- a/arch/m68knommu/include/asm/MC68EZ328.h +++ /dev/null | |||
| @@ -1,1253 +0,0 @@ | |||
| 1 | |||
| 2 | /* include/asm-m68knommu/MC68EZ328.h: 'EZ328 control registers | ||
| 3 | * | ||
| 4 | * Copyright (C) 1999 Vladimir Gurevich <vgurevic@cisco.com> | ||
| 5 | * Bear & Hare Software, Inc. | ||
| 6 | * | ||
| 7 | * Based on include/asm-m68knommu/MC68332.h | ||
| 8 | * Copyright (C) 1998 Kenneth Albanowski <kjahds@kjahds.com>, | ||
| 9 | * The Silver Hammer Group, Ltd. | ||
| 10 | * | ||
| 11 | */ | ||
| 12 | |||
| 13 | #ifndef _MC68EZ328_H_ | ||
| 14 | #define _MC68EZ328_H_ | ||
| 15 | |||
| 16 | #define BYTE_REF(addr) (*((volatile unsigned char*)addr)) | ||
| 17 | #define WORD_REF(addr) (*((volatile unsigned short*)addr)) | ||
| 18 | #define LONG_REF(addr) (*((volatile unsigned long*)addr)) | ||
| 19 | |||
| 20 | #define PUT_FIELD(field, val) (((val) << field##_SHIFT) & field##_MASK) | ||
| 21 | #define GET_FIELD(reg, field) (((reg) & field##_MASK) >> field##_SHIFT) | ||
| 22 | |||
| 23 | /********** | ||
| 24 | * | ||
| 25 | * 0xFFFFF0xx -- System Control | ||
| 26 | * | ||
| 27 | **********/ | ||
| 28 | |||
| 29 | /* | ||
| 30 | * System Control Register (SCR) | ||
| 31 | */ | ||
| 32 | #define SCR_ADDR 0xfffff000 | ||
| 33 | #define SCR BYTE_REF(SCR_ADDR) | ||
| 34 | |||
| 35 | #define SCR_WDTH8 0x01 /* 8-Bit Width Select */ | ||
| 36 | #define SCR_DMAP 0x04 /* Double Map */ | ||
| 37 | #define SCR_SO 0x08 /* Supervisor Only */ | ||
| 38 | #define SCR_BETEN 0x10 /* Bus-Error Time-Out Enable */ | ||
| 39 | #define SCR_PRV 0x20 /* Privilege Violation */ | ||
| 40 | #define SCR_WPV 0x40 /* Write Protect Violation */ | ||
| 41 | #define SCR_BETO 0x80 /* Bus-Error TimeOut */ | ||
| 42 | |||
| 43 | /* | ||
| 44 | * Silicon ID Register (Mask Revision Register (MRR) for '328 Compatibility) | ||
| 45 | */ | ||
| 46 | #define MRR_ADDR 0xfffff004 | ||
| 47 | #define MRR LONG_REF(MRR_ADDR) | ||
| 48 | |||
| 49 | /********** | ||
| 50 | * | ||
| 51 | * 0xFFFFF1xx -- Chip-Select logic | ||
| 52 | * | ||
| 53 | **********/ | ||
| 54 | |||
| 55 | /* | ||
| 56 | * Chip Select Group Base Registers | ||
| 57 | */ | ||
| 58 | #define CSGBA_ADDR 0xfffff100 | ||
| 59 | #define CSGBB_ADDR 0xfffff102 | ||
| 60 | |||
| 61 | #define CSGBC_ADDR 0xfffff104 | ||
| 62 | #define CSGBD_ADDR 0xfffff106 | ||
| 63 | |||
| 64 | #define CSGBA WORD_REF(CSGBA_ADDR) | ||
| 65 | #define CSGBB WORD_REF(CSGBB_ADDR) | ||
| 66 | #define CSGBC WORD_REF(CSGBC_ADDR) | ||
| 67 | #define CSGBD WORD_REF(CSGBD_ADDR) | ||
| 68 | |||
| 69 | /* | ||
| 70 | * Chip Select Registers | ||
| 71 | */ | ||
| 72 | #define CSA_ADDR 0xfffff110 | ||
| 73 | #define CSB_ADDR 0xfffff112 | ||
| 74 | #define CSC_ADDR 0xfffff114 | ||
| 75 | #define CSD_ADDR 0xfffff116 | ||
| 76 | |||
| 77 | #define CSA WORD_REF(CSA_ADDR) | ||
| 78 | #define CSB WORD_REF(CSB_ADDR) | ||
| 79 | #define CSC WORD_REF(CSC_ADDR) | ||
| 80 | #define CSD WORD_REF(CSD_ADDR) | ||
| 81 | |||
| 82 | #define CSA_EN 0x0001 /* Chip-Select Enable */ | ||
| 83 | #define CSA_SIZ_MASK 0x000e /* Chip-Select Size */ | ||
| 84 | #define CSA_SIZ_SHIFT 1 | ||
| 85 | #define CSA_WS_MASK 0x0070 /* Wait State */ | ||
| 86 | #define CSA_WS_SHIFT 4 | ||
| 87 | #define CSA_BSW 0x0080 /* Data Bus Width */ | ||
| 88 | #define CSA_FLASH 0x0100 /* FLASH Memory Support */ | ||
| 89 | #define CSA_RO 0x8000 /* Read-Only */ | ||
| 90 | |||
| 91 | #define CSB_EN 0x0001 /* Chip-Select Enable */ | ||
| 92 | #define CSB_SIZ_MASK 0x000e /* Chip-Select Size */ | ||
| 93 | #define CSB_SIZ_SHIFT 1 | ||
| 94 | #define CSB_WS_MASK 0x0070 /* Wait State */ | ||
| 95 | #define CSB_WS_SHIFT 4 | ||
| 96 | #define CSB_BSW 0x0080 /* Data Bus Width */ | ||
| 97 | #define CSB_FLASH 0x0100 /* FLASH Memory Support */ | ||
| 98 | #define CSB_UPSIZ_MASK 0x1800 /* Unprotected memory block size */ | ||
| 99 | #define CSB_UPSIZ_SHIFT 11 | ||
| 100 | #define CSB_ROP 0x2000 /* Readonly if protected */ | ||
| 101 | #define CSB_SOP 0x4000 /* Supervisor only if protected */ | ||
| 102 | #define CSB_RO 0x8000 /* Read-Only */ | ||
| 103 | |||
| 104 | #define CSC_EN 0x0001 /* Chip-Select Enable */ | ||
| 105 | #define CSC_SIZ_MASK 0x000e /* Chip-Select Size */ | ||
| 106 | #define CSC_SIZ_SHIFT 1 | ||
| 107 | #define CSC_WS_MASK 0x0070 /* Wait State */ | ||
| 108 | #define CSC_WS_SHIFT 4 | ||
| 109 | #define CSC_BSW 0x0080 /* Data Bus Width */ | ||
| 110 | #define CSC_FLASH 0x0100 /* FLASH Memory Support */ | ||
| 111 | #define CSC_UPSIZ_MASK 0x1800 /* Unprotected memory block size */ | ||
| 112 | #define CSC_UPSIZ_SHIFT 11 | ||
| 113 | #define CSC_ROP 0x2000 /* Readonly if protected */ | ||
| 114 | #define CSC_SOP 0x4000 /* Supervisor only if protected */ | ||
| 115 | #define CSC_RO 0x8000 /* Read-Only */ | ||
| 116 | |||
| 117 | #define CSD_EN 0x0001 /* Chip-Select Enable */ | ||
| 118 | #define CSD_SIZ_MASK 0x000e /* Chip-Select Size */ | ||
| 119 | #define CSD_SIZ_SHIFT 1 | ||
| 120 | #define CSD_WS_MASK 0x0070 /* Wait State */ | ||
| 121 | #define CSD_WS_SHIFT 4 | ||
| 122 | #define CSD_BSW 0x0080 /* Data Bus Width */ | ||
| 123 | #define CSD_FLASH 0x0100 /* FLASH Memory Support */ | ||
| 124 | #define CSD_DRAM 0x0200 /* Dram Selection */ | ||
| 125 | #define CSD_COMB 0x0400 /* Combining */ | ||
| 126 | #define CSD_UPSIZ_MASK 0x1800 /* Unprotected memory block size */ | ||
| 127 | #define CSD_UPSIZ_SHIFT 11 | ||
| 128 | #define CSD_ROP 0x2000 /* Readonly if protected */ | ||
| 129 | #define CSD_SOP 0x4000 /* Supervisor only if protected */ | ||
| 130 | #define CSD_RO 0x8000 /* Read-Only */ | ||
| 131 | |||
| 132 | /* | ||
| 133 | * Emulation Chip-Select Register | ||
| 134 | */ | ||
| 135 | #define EMUCS_ADDR 0xfffff118 | ||
| 136 | #define EMUCS WORD_REF(EMUCS_ADDR) | ||
| 137 | |||
| 138 | #define EMUCS_WS_MASK 0x0070 | ||
| 139 | #define EMUCS_WS_SHIFT 4 | ||
| 140 | |||
| 141 | /********** | ||
| 142 | * | ||
| 143 | * 0xFFFFF2xx -- Phase Locked Loop (PLL) & Power Control | ||
| 144 | * | ||
| 145 | **********/ | ||
| 146 | |||
| 147 | /* | ||
| 148 | * PLL Control Register | ||
| 149 | */ | ||
| 150 | #define PLLCR_ADDR 0xfffff200 | ||
| 151 | #define PLLCR WORD_REF(PLLCR_ADDR) | ||
| 152 | |||
| 153 | #define PLLCR_DISPLL 0x0008 /* Disable PLL */ | ||
| 154 | #define PLLCR_CLKEN 0x0010 /* Clock (CLKO pin) enable */ | ||
| 155 | #define PLLCR_PRESC 0x0020 /* VCO prescaler */ | ||
| 156 | #define PLLCR_SYSCLK_SEL_MASK 0x0700 /* System Clock Selection */ | ||
| 157 | #define PLLCR_SYSCLK_SEL_SHIFT 8 | ||
| 158 | #define PLLCR_LCDCLK_SEL_MASK 0x3800 /* LCD Clock Selection */ | ||
| 159 | #define PLLCR_LCDCLK_SEL_SHIFT 11 | ||
| 160 | |||
| 161 | /* '328-compatible definitions */ | ||
| 162 | #define PLLCR_PIXCLK_SEL_MASK PLLCR_LCDCLK_SEL_MASK | ||
| 163 | #define PLLCR_PIXCLK_SEL_SHIFT PLLCR_LCDCLK_SEL_SHIFT | ||
| 164 | |||
| 165 | /* | ||
| 166 | * PLL Frequency Select Register | ||
| 167 | */ | ||
| 168 | #define PLLFSR_ADDR 0xfffff202 | ||
| 169 | #define PLLFSR WORD_REF(PLLFSR_ADDR) | ||
| 170 | |||
| 171 | #define PLLFSR_PC_MASK 0x00ff /* P Count */ | ||
| 172 | #define PLLFSR_PC_SHIFT 0 | ||
| 173 | #define PLLFSR_QC_MASK 0x0f00 /* Q Count */ | ||
| 174 | #define PLLFSR_QC_SHIFT 8 | ||
| 175 | #define PLLFSR_PROT 0x4000 /* Protect P & Q */ | ||
| 176 | #define PLLFSR_CLK32 0x8000 /* Clock 32 (kHz) */ | ||
| 177 | |||
| 178 | /* | ||
| 179 | * Power Control Register | ||
| 180 | */ | ||
| 181 | #define PCTRL_ADDR 0xfffff207 | ||
| 182 | #define PCTRL BYTE_REF(PCTRL_ADDR) | ||
| 183 | |||
| 184 | #define PCTRL_WIDTH_MASK 0x1f /* CPU Clock bursts width */ | ||
| 185 | #define PCTRL_WIDTH_SHIFT 0 | ||
| 186 | #define PCTRL_PCEN 0x80 /* Power Control Enable */ | ||
| 187 | |||
| 188 | /********** | ||
| 189 | * | ||
| 190 | * 0xFFFFF3xx -- Interrupt Controller | ||
| 191 | * | ||
| 192 | **********/ | ||
| 193 | |||
| 194 | /* | ||
| 195 | * Interrupt Vector Register | ||
| 196 | */ | ||
| 197 | #define IVR_ADDR 0xfffff300 | ||
| 198 | #define IVR BYTE_REF(IVR_ADDR) | ||
| 199 | |||
| 200 | #define IVR_VECTOR_MASK 0xF8 | ||
| 201 | |||
| 202 | /* | ||
| 203 | * Interrupt control Register | ||
| 204 | */ | ||
| 205 | #define ICR_ADDR 0xfffff302 | ||
| 206 | #define ICR WORD_REF(ICR_ADDR) | ||
| 207 | |||
| 208 | #define ICR_POL5 0x0080 /* Polarity Control for IRQ5 */ | ||
| 209 | #define ICR_ET6 0x0100 /* Edge Trigger Select for IRQ6 */ | ||
| 210 | #define ICR_ET3 0x0200 /* Edge Trigger Select for IRQ3 */ | ||
| 211 | #define ICR_ET2 0x0400 /* Edge Trigger Select for IRQ2 */ | ||
| 212 | #define ICR_ET1 0x0800 /* Edge Trigger Select for IRQ1 */ | ||
| 213 | #define ICR_POL6 0x1000 /* Polarity Control for IRQ6 */ | ||
| 214 | #define ICR_POL3 0x2000 /* Polarity Control for IRQ3 */ | ||
| 215 | #define ICR_POL2 0x4000 /* Polarity Control for IRQ2 */ | ||
| 216 | #define ICR_POL1 0x8000 /* Polarity Control for IRQ1 */ | ||
| 217 | |||
| 218 | /* | ||
| 219 | * Interrupt Mask Register | ||
| 220 | */ | ||
| 221 | #define IMR_ADDR 0xfffff304 | ||
| 222 | #define IMR LONG_REF(IMR_ADDR) | ||
| 223 | |||
| 224 | /* | ||
| 225 | * Define the names for bit positions first. This is useful for | ||
| 226 | * request_irq | ||
| 227 | */ | ||
| 228 | #define SPI_IRQ_NUM 0 /* SPI interrupt */ | ||
| 229 | #define TMR_IRQ_NUM 1 /* Timer interrupt */ | ||
| 230 | #define UART_IRQ_NUM 2 /* UART interrupt */ | ||
| 231 | #define WDT_IRQ_NUM 3 /* Watchdog Timer interrupt */ | ||
| 232 | #define RTC_IRQ_NUM 4 /* RTC interrupt */ | ||
| 233 | #define KB_IRQ_NUM 6 /* Keyboard Interrupt */ | ||
| 234 | #define PWM_IRQ_NUM 7 /* Pulse-Width Modulator int. */ | ||
| 235 | #define INT0_IRQ_NUM 8 /* External INT0 */ | ||
| 236 | #define INT1_IRQ_NUM 9 /* External INT1 */ | ||
| 237 | #define INT2_IRQ_NUM 10 /* External INT2 */ | ||
| 238 | #define INT3_IRQ_NUM 11 /* External INT3 */ | ||
| 239 | #define IRQ1_IRQ_NUM 16 /* IRQ1 */ | ||
| 240 | #define IRQ2_IRQ_NUM 17 /* IRQ2 */ | ||
| 241 | #define IRQ3_IRQ_NUM 18 /* IRQ3 */ | ||
| 242 | #define IRQ6_IRQ_NUM 19 /* IRQ6 */ | ||
| 243 | #define IRQ5_IRQ_NUM 20 /* IRQ5 */ | ||
| 244 | #define SAM_IRQ_NUM 22 /* Sampling Timer for RTC */ | ||
| 245 | #define EMIQ_IRQ_NUM 23 /* Emulator Interrupt */ | ||
| 246 | |||
| 247 | /* '328-compatible definitions */ | ||
| 248 | #define SPIM_IRQ_NUM SPI_IRQ_NUM | ||
| 249 | #define TMR1_IRQ_NUM TMR_IRQ_NUM | ||
| 250 | |||
| 251 | /* | ||
| 252 | * Here go the bitmasks themselves | ||
| 253 | */ | ||
| 254 | #define IMR_MSPI (1 << SPI_IRQ_NUM) /* Mask SPI interrupt */ | ||
| 255 | #define IMR_MTMR (1 << TMR_IRQ_NUM) /* Mask Timer interrupt */ | ||
| 256 | #define IMR_MUART (1 << UART_IRQ_NUM) /* Mask UART interrupt */ | ||
| 257 | #define IMR_MWDT (1 << WDT_IRQ_NUM) /* Mask Watchdog Timer interrupt */ | ||
| 258 | #define IMR_MRTC (1 << RTC_IRQ_NUM) /* Mask RTC interrupt */ | ||
| 259 | #define IMR_MKB (1 << KB_IRQ_NUM) /* Mask Keyboard Interrupt */ | ||
| 260 | #define IMR_MPWM (1 << PWM_IRQ_NUM) /* Mask Pulse-Width Modulator int. */ | ||
| 261 | #define IMR_MINT0 (1 << INT0_IRQ_NUM) /* Mask External INT0 */ | ||
| 262 | #define IMR_MINT1 (1 << INT1_IRQ_NUM) /* Mask External INT1 */ | ||
| 263 | #define IMR_MINT2 (1 << INT2_IRQ_NUM) /* Mask External INT2 */ | ||
| 264 | #define IMR_MINT3 (1 << INT3_IRQ_NUM) /* Mask External INT3 */ | ||
| 265 | #define IMR_MIRQ1 (1 << IRQ1_IRQ_NUM) /* Mask IRQ1 */ | ||
| 266 | #define IMR_MIRQ2 (1 << IRQ2_IRQ_NUM) /* Mask IRQ2 */ | ||
| 267 | #define IMR_MIRQ3 (1 << IRQ3_IRQ_NUM) /* Mask IRQ3 */ | ||
| 268 | #define IMR_MIRQ6 (1 << IRQ6_IRQ_NUM) /* Mask IRQ6 */ | ||
| 269 | #define IMR_MIRQ5 (1 << IRQ5_IRQ_NUM) /* Mask IRQ5 */ | ||
| 270 | #define IMR_MSAM (1 << SAM_IRQ_NUM) /* Mask Sampling Timer for RTC */ | ||
| 271 | #define IMR_MEMIQ (1 << EMIQ_IRQ_NUM) /* Mask Emulator Interrupt */ | ||
| 272 | |||
| 273 | /* '328-compatible definitions */ | ||
| 274 | #define IMR_MSPIM IMR_MSPI | ||
| 275 | #define IMR_MTMR1 IMR_MTMR | ||
| 276 | |||
| 277 | /* | ||
| 278 | * Interrupt Status Register | ||
| 279 | */ | ||
| 280 | #define ISR_ADDR 0xfffff30c | ||
| 281 | #define ISR LONG_REF(ISR_ADDR) | ||
| 282 | |||
| 283 | #define ISR_SPI (1 << SPI_IRQ_NUM) /* SPI interrupt */ | ||
| 284 | #define ISR_TMR (1 << TMR_IRQ_NUM) /* Timer interrupt */ | ||
| 285 | #define ISR_UART (1 << UART_IRQ_NUM) /* UART interrupt */ | ||
| 286 | #define ISR_WDT (1 << WDT_IRQ_NUM) /* Watchdog Timer interrupt */ | ||
| 287 | #define ISR_RTC (1 << RTC_IRQ_NUM) /* RTC interrupt */ | ||
| 288 | #define ISR_KB (1 << KB_IRQ_NUM) /* Keyboard Interrupt */ | ||
| 289 | #define ISR_PWM (1 << PWM_IRQ_NUM) /* Pulse-Width Modulator interrupt */ | ||
| 290 | #define ISR_INT0 (1 << INT0_IRQ_NUM) /* External INT0 */ | ||
| 291 | #define ISR_INT1 (1 << INT1_IRQ_NUM) /* External INT1 */ | ||
| 292 | #define ISR_INT2 (1 << INT2_IRQ_NUM) /* External INT2 */ | ||
| 293 | #define ISR_INT3 (1 << INT3_IRQ_NUM) /* External INT3 */ | ||
| 294 | #define ISR_IRQ1 (1 << IRQ1_IRQ_NUM) /* IRQ1 */ | ||
| 295 | #define ISR_IRQ2 (1 << IRQ2_IRQ_NUM) /* IRQ2 */ | ||
| 296 | #define ISR_IRQ3 (1 << IRQ3_IRQ_NUM) /* IRQ3 */ | ||
| 297 | #define ISR_IRQ6 (1 << IRQ6_IRQ_NUM) /* IRQ6 */ | ||
| 298 | #define ISR_IRQ5 (1 << IRQ5_IRQ_NUM) /* IRQ5 */ | ||
| 299 | #define ISR_SAM (1 << SAM_IRQ_NUM) /* Sampling Timer for RTC */ | ||
| 300 | #define ISR_EMIQ (1 << EMIQ_IRQ_NUM) /* Emulator Interrupt */ | ||
| 301 | |||
| 302 | /* '328-compatible definitions */ | ||
| 303 | #define ISR_SPIM ISR_SPI | ||
| 304 | #define ISR_TMR1 ISR_TMR | ||
| 305 | |||
| 306 | /* | ||
| 307 | * Interrupt Pending Register | ||
| 308 | */ | ||
| 309 | #define IPR_ADDR 0xfffff30c | ||
| 310 | #define IPR LONG_REF(IPR_ADDR) | ||
| 311 | |||
| 312 | #define IPR_SPI (1 << SPI_IRQ_NUM) /* SPI interrupt */ | ||
| 313 | #define IPR_TMR (1 << TMR_IRQ_NUM) /* Timer interrupt */ | ||
| 314 | #define IPR_UART (1 << UART_IRQ_NUM) /* UART interrupt */ | ||
| 315 | #define IPR_WDT (1 << WDT_IRQ_NUM) /* Watchdog Timer interrupt */ | ||
| 316 | #define IPR_RTC (1 << RTC_IRQ_NUM) /* RTC interrupt */ | ||
| 317 | #define IPR_KB (1 << KB_IRQ_NUM) /* Keyboard Interrupt */ | ||
| 318 | #define IPR_PWM (1 << PWM_IRQ_NUM) /* Pulse-Width Modulator interrupt */ | ||
| 319 | #define IPR_INT0 (1 << INT0_IRQ_NUM) /* External INT0 */ | ||
| 320 | #define IPR_INT1 (1 << INT1_IRQ_NUM) /* External INT1 */ | ||
| 321 | #define IPR_INT2 (1 << INT2_IRQ_NUM) /* External INT2 */ | ||
| 322 | #define IPR_INT3 (1 << INT3_IRQ_NUM) /* External INT3 */ | ||
| 323 | #define IPR_IRQ1 (1 << IRQ1_IRQ_NUM) /* IRQ1 */ | ||
| 324 | #define IPR_IRQ2 (1 << IRQ2_IRQ_NUM) /* IRQ2 */ | ||
| 325 | #define IPR_IRQ3 (1 << IRQ3_IRQ_NUM) /* IRQ3 */ | ||
| 326 | #define IPR_IRQ6 (1 << IRQ6_IRQ_NUM) /* IRQ6 */ | ||
| 327 | #define IPR_IRQ5 (1 << IRQ5_IRQ_NUM) /* IRQ5 */ | ||
| 328 | #define IPR_SAM (1 << SAM_IRQ_NUM) /* Sampling Timer for RTC */ | ||
| 329 | #define IPR_EMIQ (1 << EMIQ_IRQ_NUM) /* Emulator Interrupt */ | ||
| 330 | |||
| 331 | /* '328-compatible definitions */ | ||
| 332 | #define IPR_SPIM IPR_SPI | ||
| 333 | #define IPR_TMR1 IPR_TMR | ||
| 334 | |||
| 335 | /********** | ||
| 336 | * | ||
| 337 | * 0xFFFFF4xx -- Parallel Ports | ||
| 338 | * | ||
| 339 | **********/ | ||
| 340 | |||
| 341 | /* | ||
| 342 | * Port A | ||
| 343 | */ | ||
| 344 | #define PADIR_ADDR 0xfffff400 /* Port A direction reg */ | ||
| 345 | #define PADATA_ADDR 0xfffff401 /* Port A data register */ | ||
| 346 | #define PAPUEN_ADDR 0xfffff402 /* Port A Pull-Up enable reg */ | ||
| 347 | |||
| 348 | #define PADIR BYTE_REF(PADIR_ADDR) | ||
| 349 | #define PADATA BYTE_REF(PADATA_ADDR) | ||
| 350 | #define PAPUEN BYTE_REF(PAPUEN_ADDR) | ||
| 351 | |||
| 352 | #define PA(x) (1 << (x)) | ||
| 353 | |||
| 354 | /* | ||
| 355 | * Port B | ||
| 356 | */ | ||
| 357 | #define PBDIR_ADDR 0xfffff408 /* Port B direction reg */ | ||
| 358 | #define PBDATA_ADDR 0xfffff409 /* Port B data register */ | ||
| 359 | #define PBPUEN_ADDR 0xfffff40a /* Port B Pull-Up enable reg */ | ||
| 360 | #define PBSEL_ADDR 0xfffff40b /* Port B Select Register */ | ||
| 361 | |||
| 362 | #define PBDIR BYTE_REF(PBDIR_ADDR) | ||
| 363 | #define PBDATA BYTE_REF(PBDATA_ADDR) | ||
| 364 | #define PBPUEN BYTE_REF(PBPUEN_ADDR) | ||
| 365 | #define PBSEL BYTE_REF(PBSEL_ADDR) | ||
| 366 | |||
| 367 | #define PB(x) (1 << (x)) | ||
| 368 | |||
| 369 | #define PB_CSB0 0x01 /* Use CSB0 as PB[0] */ | ||
| 370 | #define PB_CSB1 0x02 /* Use CSB1 as PB[1] */ | ||
| 371 | #define PB_CSC0_RAS0 0x04 /* Use CSC0/RAS0 as PB[2] */ | ||
| 372 | #define PB_CSC1_RAS1 0x08 /* Use CSC1/RAS1 as PB[3] */ | ||
| 373 | #define PB_CSD0_CAS0 0x10 /* Use CSD0/CAS0 as PB[4] */ | ||
| 374 | #define PB_CSD1_CAS1 0x20 /* Use CSD1/CAS1 as PB[5] */ | ||
| 375 | #define PB_TIN_TOUT 0x40 /* Use TIN/TOUT as PB[6] */ | ||
| 376 | #define PB_PWMO 0x80 /* Use PWMO as PB[7] */ | ||
| 377 | |||
| 378 | /* | ||
| 379 | * Port C | ||
| 380 | */ | ||
| 381 | #define PCDIR_ADDR 0xfffff410 /* Port C direction reg */ | ||
| 382 | #define PCDATA_ADDR 0xfffff411 /* Port C data register */ | ||
| 383 | #define PCPDEN_ADDR 0xfffff412 /* Port C Pull-Down enb. reg */ | ||
| 384 | #define PCSEL_ADDR 0xfffff413 /* Port C Select Register */ | ||
| 385 | |||
| 386 | #define PCDIR BYTE_REF(PCDIR_ADDR) | ||
| 387 | #define PCDATA BYTE_REF(PCDATA_ADDR) | ||
| 388 | #define PCPDEN BYTE_REF(PCPDEN_ADDR) | ||
| 389 | #define PCSEL BYTE_REF(PCSEL_ADDR) | ||
| 390 | |||
| 391 | #define PC(x) (1 << (x)) | ||
| 392 | |||
| 393 | #define PC_LD0 0x01 /* Use LD0 as PC[0] */ | ||
| 394 | #define PC_LD1 0x02 /* Use LD1 as PC[1] */ | ||
| 395 | #define PC_LD2 0x04 /* Use LD2 as PC[2] */ | ||
| 396 | #define PC_LD3 0x08 /* Use LD3 as PC[3] */ | ||
| 397 | #define PC_LFLM 0x10 /* Use LFLM as PC[4] */ | ||
| 398 | #define PC_LLP 0x20 /* Use LLP as PC[5] */ | ||
| 399 | #define PC_LCLK 0x40 /* Use LCLK as PC[6] */ | ||
| 400 | #define PC_LACD 0x80 /* Use LACD as PC[7] */ | ||
| 401 | |||
| 402 | /* | ||
| 403 | * Port D | ||
| 404 | */ | ||
| 405 | #define PDDIR_ADDR 0xfffff418 /* Port D direction reg */ | ||
| 406 | #define PDDATA_ADDR 0xfffff419 /* Port D data register */ | ||
| 407 | #define PDPUEN_ADDR 0xfffff41a /* Port D Pull-Up enable reg */ | ||
| 408 | #define PDSEL_ADDR 0xfffff41b /* Port D Select Register */ | ||
| 409 | #define PDPOL_ADDR 0xfffff41c /* Port D Polarity Register */ | ||
| 410 | #define PDIRQEN_ADDR 0xfffff41d /* Port D IRQ enable register */ | ||
| 411 | #define PDKBEN_ADDR 0xfffff41e /* Port D Keyboard Enable reg */ | ||
| 412 | #define PDIQEG_ADDR 0xfffff41f /* Port D IRQ Edge Register */ | ||
| 413 | |||
| 414 | #define PDDIR BYTE_REF(PDDIR_ADDR) | ||
| 415 | #define PDDATA BYTE_REF(PDDATA_ADDR) | ||
| 416 | #define PDPUEN BYTE_REF(PDPUEN_ADDR) | ||
| 417 | #define PDSEL BYTE_REF(PDSEL_ADDR) | ||
| 418 | #define PDPOL BYTE_REF(PDPOL_ADDR) | ||
| 419 | #define PDIRQEN BYTE_REF(PDIRQEN_ADDR) | ||
| 420 | #define PDKBEN BYTE_REF(PDKBEN_ADDR) | ||
| 421 | #define PDIQEG BYTE_REF(PDIQEG_ADDR) | ||
| 422 | |||
| 423 | #define PD(x) (1 << (x)) | ||
| 424 | |||
| 425 | #define PD_INT0 0x01 /* Use INT0 as PD[0] */ | ||
| 426 | #define PD_INT1 0x02 /* Use INT1 as PD[1] */ | ||
| 427 | #define PD_INT2 0x04 /* Use INT2 as PD[2] */ | ||
| 428 | #define PD_INT3 0x08 /* Use INT3 as PD[3] */ | ||
| 429 | #define PD_IRQ1 0x10 /* Use IRQ1 as PD[4] */ | ||
| 430 | #define PD_IRQ2 0x20 /* Use IRQ2 as PD[5] */ | ||
| 431 | #define PD_IRQ3 0x40 /* Use IRQ3 as PD[6] */ | ||
| 432 | #define PD_IRQ6 0x80 /* Use IRQ6 as PD[7] */ | ||
| 433 | |||
| 434 | /* | ||
| 435 | * Port E | ||
| 436 | */ | ||
| 437 | #define PEDIR_ADDR 0xfffff420 /* Port E direction reg */ | ||
| 438 | #define PEDATA_ADDR 0xfffff421 /* Port E data register */ | ||
| 439 | #define PEPUEN_ADDR 0xfffff422 /* Port E Pull-Up enable reg */ | ||
| 440 | #define PESEL_ADDR 0xfffff423 /* Port E Select Register */ | ||
| 441 | |||
| 442 | #define PEDIR BYTE_REF(PEDIR_ADDR) | ||
| 443 | #define PEDATA BYTE_REF(PEDATA_ADDR) | ||
| 444 | #define PEPUEN BYTE_REF(PEPUEN_ADDR) | ||
| 445 | #define PESEL BYTE_REF(PESEL_ADDR) | ||
| 446 | |||
| 447 | #define PE(x) (1 << (x)) | ||
| 448 | |||
| 449 | #define PE_SPMTXD 0x01 /* Use SPMTXD as PE[0] */ | ||
| 450 | #define PE_SPMRXD 0x02 /* Use SPMRXD as PE[1] */ | ||
| 451 | #define PE_SPMCLK 0x04 /* Use SPMCLK as PE[2] */ | ||
| 452 | #define PE_DWE 0x08 /* Use DWE as PE[3] */ | ||
| 453 | #define PE_RXD 0x10 /* Use RXD as PE[4] */ | ||
| 454 | #define PE_TXD 0x20 /* Use TXD as PE[5] */ | ||
| 455 | #define PE_RTS 0x40 /* Use RTS as PE[6] */ | ||
| 456 | #define PE_CTS 0x80 /* Use CTS as PE[7] */ | ||
| 457 | |||
| 458 | /* | ||
| 459 | * Port F | ||
| 460 | */ | ||
| 461 | #define PFDIR_ADDR 0xfffff428 /* Port F direction reg */ | ||
| 462 | #define PFDATA_ADDR 0xfffff429 /* Port F data register */ | ||
| 463 | #define PFPUEN_ADDR 0xfffff42a /* Port F Pull-Up enable reg */ | ||
| 464 | #define PFSEL_ADDR 0xfffff42b /* Port F Select Register */ | ||
| 465 | |||
| 466 | #define PFDIR BYTE_REF(PFDIR_ADDR) | ||
| 467 | #define PFDATA BYTE_REF(PFDATA_ADDR) | ||
| 468 | #define PFPUEN BYTE_REF(PFPUEN_ADDR) | ||
| 469 | #define PFSEL BYTE_REF(PFSEL_ADDR) | ||
| 470 | |||
| 471 | #define PF(x) (1 << (x)) | ||
| 472 | |||
| 473 | #define PF_LCONTRAST 0x01 /* Use LCONTRAST as PF[0] */ | ||
| 474 | #define PF_IRQ5 0x02 /* Use IRQ5 as PF[1] */ | ||
| 475 | #define PF_CLKO 0x04 /* Use CLKO as PF[2] */ | ||
| 476 | #define PF_A20 0x08 /* Use A20 as PF[3] */ | ||
| 477 | #define PF_A21 0x10 /* Use A21 as PF[4] */ | ||
| 478 | #define PF_A22 0x20 /* Use A22 as PF[5] */ | ||
| 479 | #define PF_A23 0x40 /* Use A23 as PF[6] */ | ||
| 480 | #define PF_CSA1 0x80 /* Use CSA1 as PF[7] */ | ||
| 481 | |||
| 482 | /* | ||
| 483 | * Port G | ||
| 484 | */ | ||
| 485 | #define PGDIR_ADDR 0xfffff430 /* Port G direction reg */ | ||
| 486 | #define PGDATA_ADDR 0xfffff431 /* Port G data register */ | ||
| 487 | #define PGPUEN_ADDR 0xfffff432 /* Port G Pull-Up enable reg */ | ||
| 488 | #define PGSEL_ADDR 0xfffff433 /* Port G Select Register */ | ||
| 489 | |||
| 490 | #define PGDIR BYTE_REF(PGDIR_ADDR) | ||
| 491 | #define PGDATA BYTE_REF(PGDATA_ADDR) | ||
| 492 | #define PGPUEN BYTE_REF(PGPUEN_ADDR) | ||
| 493 | #define PGSEL BYTE_REF(PGSEL_ADDR) | ||
| 494 | |||
| 495 | #define PG(x) (1 << (x)) | ||
| 496 | |||
| 497 | #define PG_BUSW_DTACK 0x01 /* Use BUSW/DTACK as PG[0] */ | ||
| 498 | #define PG_A0 0x02 /* Use A0 as PG[1] */ | ||
| 499 | #define PG_EMUIRQ 0x04 /* Use EMUIRQ as PG[2] */ | ||
| 500 | #define PG_HIZ_P_D 0x08 /* Use HIZ/P/D as PG[3] */ | ||
| 501 | #define PG_EMUCS 0x10 /* Use EMUCS as PG[4] */ | ||
| 502 | #define PG_EMUBRK 0x20 /* Use EMUBRK as PG[5] */ | ||
| 503 | |||
| 504 | /********** | ||
| 505 | * | ||
| 506 | * 0xFFFFF5xx -- Pulse-Width Modulator (PWM) | ||
| 507 | * | ||
| 508 | **********/ | ||
| 509 | |||
| 510 | /* | ||
| 511 | * PWM Control Register | ||
| 512 | */ | ||
| 513 | #define PWMC_ADDR 0xfffff500 | ||
| 514 | #define PWMC WORD_REF(PWMC_ADDR) | ||
| 515 | |||
| 516 | #define PWMC_CLKSEL_MASK 0x0003 /* Clock Selection */ | ||
| 517 | #define PWMC_CLKSEL_SHIFT 0 | ||
| 518 | #define PWMC_REPEAT_MASK 0x000c /* Sample Repeats */ | ||
| 519 | #define PWMC_REPEAT_SHIFT 2 | ||
| 520 | #define PWMC_EN 0x0010 /* Enable PWM */ | ||
| 521 | #define PMNC_FIFOAV 0x0020 /* FIFO Available */ | ||
| 522 | #define PWMC_IRQEN 0x0040 /* Interrupt Request Enable */ | ||
| 523 | #define PWMC_IRQ 0x0080 /* Interrupt Request (FIFO empty) */ | ||
| 524 | #define PWMC_PRESCALER_MASK 0x7f00 /* Incoming Clock prescaler */ | ||
| 525 | #define PWMC_PRESCALER_SHIFT 8 | ||
| 526 | #define PWMC_CLKSRC 0x8000 /* Clock Source Select */ | ||
| 527 | |||
| 528 | /* '328-compatible definitions */ | ||
| 529 | #define PWMC_PWMEN PWMC_EN | ||
| 530 | |||
| 531 | /* | ||
| 532 | * PWM Sample Register | ||
| 533 | */ | ||
| 534 | #define PWMS_ADDR 0xfffff502 | ||
| 535 | #define PWMS WORD_REF(PWMS_ADDR) | ||
| 536 | |||
| 537 | /* | ||
| 538 | * PWM Period Register | ||
| 539 | */ | ||
| 540 | #define PWMP_ADDR 0xfffff504 | ||
| 541 | #define PWMP BYTE_REF(PWMP_ADDR) | ||
| 542 | |||
| 543 | /* | ||
| 544 | * PWM Counter Register | ||
| 545 | */ | ||
| 546 | #define PWMCNT_ADDR 0xfffff505 | ||
| 547 | #define PWMCNT BYTE_REF(PWMCNT_ADDR) | ||
| 548 | |||
| 549 | /********** | ||
| 550 | * | ||
| 551 | * 0xFFFFF6xx -- General-Purpose Timer | ||
| 552 | * | ||
| 553 | **********/ | ||
| 554 | |||
| 555 | /* | ||
| 556 | * Timer Control register | ||
| 557 | */ | ||
| 558 | #define TCTL_ADDR 0xfffff600 | ||
| 559 | #define TCTL WORD_REF(TCTL_ADDR) | ||
| 560 | |||
| 561 | #define TCTL_TEN 0x0001 /* Timer Enable */ | ||
| 562 | #define TCTL_CLKSOURCE_MASK 0x000e /* Clock Source: */ | ||
| 563 | #define TCTL_CLKSOURCE_STOP 0x0000 /* Stop count (disabled) */ | ||
| 564 | #define TCTL_CLKSOURCE_SYSCLK 0x0002 /* SYSCLK to prescaler */ | ||
| 565 | #define TCTL_CLKSOURCE_SYSCLK_16 0x0004 /* SYSCLK/16 to prescaler */ | ||
| 566 | #define TCTL_CLKSOURCE_TIN 0x0006 /* TIN to prescaler */ | ||
| 567 | #define TCTL_CLKSOURCE_32KHZ 0x0008 /* 32kHz clock to prescaler */ | ||
| 568 | #define TCTL_IRQEN 0x0010 /* IRQ Enable */ | ||
| 569 | #define TCTL_OM 0x0020 /* Output Mode */ | ||
| 570 | #define TCTL_CAP_MASK 0x00c0 /* Capture Edge: */ | ||
| 571 | #define TCTL_CAP_RE 0x0040 /* Capture on rizing edge */ | ||
| 572 | #define TCTL_CAP_FE 0x0080 /* Capture on falling edge */ | ||
| 573 | #define TCTL_FRR 0x0010 /* Free-Run Mode */ | ||
| 574 | |||
| 575 | /* '328-compatible definitions */ | ||
| 576 | #define TCTL1_ADDR TCTL_ADDR | ||
| 577 | #define TCTL1 TCTL | ||
| 578 | |||
| 579 | /* | ||
| 580 | * Timer Prescaler Register | ||
| 581 | */ | ||
| 582 | #define TPRER_ADDR 0xfffff602 | ||
| 583 | #define TPRER WORD_REF(TPRER_ADDR) | ||
| 584 | |||
| 585 | /* '328-compatible definitions */ | ||
| 586 | #define TPRER1_ADDR TPRER_ADDR | ||
| 587 | #define TPRER1 TPRER | ||
| 588 | |||
| 589 | /* | ||
| 590 | * Timer Compare Register | ||
| 591 | */ | ||
| 592 | #define TCMP_ADDR 0xfffff604 | ||
| 593 | #define TCMP WORD_REF(TCMP_ADDR) | ||
| 594 | |||
| 595 | /* '328-compatible definitions */ | ||
| 596 | #define TCMP1_ADDR TCMP_ADDR | ||
| 597 | #define TCMP1 TCMP | ||
| 598 | |||
| 599 | /* | ||
| 600 | * Timer Capture register | ||
| 601 | */ | ||
| 602 | #define TCR_ADDR 0xfffff606 | ||
| 603 | #define TCR WORD_REF(TCR_ADDR) | ||
| 604 | |||
| 605 | /* '328-compatible definitions */ | ||
| 606 | #define TCR1_ADDR TCR_ADDR | ||
| 607 | #define TCR1 TCR | ||
| 608 | |||
| 609 | /* | ||
| 610 | * Timer Counter Register | ||
| 611 | */ | ||
| 612 | #define TCN_ADDR 0xfffff608 | ||
| 613 | #define TCN WORD_REF(TCN_ADDR) | ||
| 614 | |||
| 615 | /* '328-compatible definitions */ | ||
| 616 | #define TCN1_ADDR TCN_ADDR | ||
| 617 | #define TCN1 TCN | ||
| 618 | |||
| 619 | /* | ||
| 620 | * Timer Status Register | ||
| 621 | */ | ||
| 622 | #define TSTAT_ADDR 0xfffff60a | ||
| 623 | #define TSTAT WORD_REF(TSTAT_ADDR) | ||
| 624 | |||
| 625 | #define TSTAT_COMP 0x0001 /* Compare Event occurred */ | ||
| 626 | #define TSTAT_CAPT 0x0001 /* Capture Event occurred */ | ||
| 627 | |||
| 628 | /* '328-compatible definitions */ | ||
| 629 | #define TSTAT1_ADDR TSTAT_ADDR | ||
| 630 | #define TSTAT1 TSTAT | ||
| 631 | |||
| 632 | /********** | ||
| 633 | * | ||
| 634 | * 0xFFFFF8xx -- Serial Periferial Interface Master (SPIM) | ||
| 635 | * | ||
| 636 | **********/ | ||
| 637 | |||
| 638 | /* | ||
| 639 | * SPIM Data Register | ||
| 640 | */ | ||
| 641 | #define SPIMDATA_ADDR 0xfffff800 | ||
| 642 | #define SPIMDATA WORD_REF(SPIMDATA_ADDR) | ||
| 643 | |||
| 644 | /* | ||
| 645 | * SPIM Control/Status Register | ||
| 646 | */ | ||
| 647 | #define SPIMCONT_ADDR 0xfffff802 | ||
| 648 | #define SPIMCONT WORD_REF(SPIMCONT_ADDR) | ||
| 649 | |||
| 650 | #define SPIMCONT_BIT_COUNT_MASK 0x000f /* Transfer Length in Bytes */ | ||
| 651 | #define SPIMCONT_BIT_COUNT_SHIFT 0 | ||
| 652 | #define SPIMCONT_POL 0x0010 /* SPMCLK Signel Polarity */ | ||
| 653 | #define SPIMCONT_PHA 0x0020 /* Clock/Data phase relationship */ | ||
| 654 | #define SPIMCONT_IRQEN 0x0040 /* IRQ Enable */ | ||
| 655 | #define SPIMCONT_IRQ 0x0080 /* Interrupt Request */ | ||
| 656 | #define SPIMCONT_XCH 0x0100 /* Exchange */ | ||
| 657 | #define SPIMCONT_ENABLE 0x0200 /* Enable SPIM */ | ||
| 658 | #define SPIMCONT_DATA_RATE_MASK 0xe000 /* SPIM Data Rate */ | ||
| 659 | #define SPIMCONT_DATA_RATE_SHIFT 13 | ||
| 660 | |||
| 661 | /* '328-compatible definitions */ | ||
| 662 | #define SPIMCONT_SPIMIRQ SPIMCONT_IRQ | ||
| 663 | #define SPIMCONT_SPIMEN SPIMCONT_ENABLE | ||
| 664 | |||
| 665 | /********** | ||
| 666 | * | ||
| 667 | * 0xFFFFF9xx -- UART | ||
| 668 | * | ||
| 669 | **********/ | ||
| 670 | |||
| 671 | /* | ||
| 672 | * UART Status/Control Register | ||
| 673 | */ | ||
| 674 | #define USTCNT_ADDR 0xfffff900 | ||
| 675 | #define USTCNT WORD_REF(USTCNT_ADDR) | ||
| 676 | |||
| 677 | #define USTCNT_TXAE 0x0001 /* Transmitter Available Interrupt Enable */ | ||
| 678 | #define USTCNT_TXHE 0x0002 /* Transmitter Half Empty Enable */ | ||
| 679 | #define USTCNT_TXEE 0x0004 /* Transmitter Empty Interrupt Enable */ | ||
| 680 | #define USTCNT_RXRE 0x0008 /* Receiver Ready Interrupt Enable */ | ||
| 681 | #define USTCNT_RXHE 0x0010 /* Receiver Half-Full Interrupt Enable */ | ||
| 682 | #define USTCNT_RXFE 0x0020 /* Receiver Full Interrupt Enable */ | ||
| 683 | #define USTCNT_CTSD 0x0040 /* CTS Delta Interrupt Enable */ | ||
| 684 | #define USTCNT_ODEN 0x0080 /* Old Data Interrupt Enable */ | ||
| 685 | #define USTCNT_8_7 0x0100 /* Eight or seven-bit transmission */ | ||
| 686 | #define USTCNT_STOP 0x0200 /* Stop bit transmission */ | ||
| 687 | #define USTCNT_ODD 0x0400 /* Odd Parity */ | ||
| 688 | #define USTCNT_PEN 0x0800 /* Parity Enable */ | ||
| 689 | #define USTCNT_CLKM 0x1000 /* Clock Mode Select */ | ||
| 690 | #define USTCNT_TXEN 0x2000 /* Transmitter Enable */ | ||
| 691 | #define USTCNT_RXEN 0x4000 /* Receiver Enable */ | ||
| 692 | #define USTCNT_UEN 0x8000 /* UART Enable */ | ||
| 693 | |||
| 694 | /* '328-compatible definitions */ | ||
| 695 | #define USTCNT_TXAVAILEN USTCNT_TXAE | ||
| 696 | #define USTCNT_TXHALFEN USTCNT_TXHE | ||
| 697 | #define USTCNT_TXEMPTYEN USTCNT_TXEE | ||
| 698 | #define USTCNT_RXREADYEN USTCNT_RXRE | ||
| 699 | #define USTCNT_RXHALFEN USTCNT_RXHE | ||
| 700 | #define USTCNT_RXFULLEN USTCNT_RXFE | ||
| 701 | #define USTCNT_CTSDELTAEN USTCNT_CTSD | ||
| 702 | #define USTCNT_ODD_EVEN USTCNT_ODD | ||
| 703 | #define USTCNT_PARITYEN USTCNT_PEN | ||
| 704 | #define USTCNT_CLKMODE USTCNT_CLKM | ||
| 705 | #define USTCNT_UARTEN USTCNT_UEN | ||
| 706 | |||
| 707 | /* | ||
| 708 | * UART Baud Control Register | ||
| 709 | */ | ||
| 710 | #define UBAUD_ADDR 0xfffff902 | ||
| 711 | #define UBAUD WORD_REF(UBAUD_ADDR) | ||
| 712 | |||
| 713 | #define UBAUD_PRESCALER_MASK 0x003f /* Actual divisor is 65 - PRESCALER */ | ||
| 714 | #define UBAUD_PRESCALER_SHIFT 0 | ||
| 715 | #define UBAUD_DIVIDE_MASK 0x0700 /* Baud Rate freq. divizor */ | ||
| 716 | #define UBAUD_DIVIDE_SHIFT 8 | ||
| 717 | #define UBAUD_BAUD_SRC 0x0800 /* Baud Rate Source */ | ||
| 718 | #define UBAUD_UCLKDIR 0x2000 /* UCLK Direction */ | ||
| 719 | |||
| 720 | /* | ||
| 721 | * UART Receiver Register | ||
| 722 | */ | ||
| 723 | #define URX_ADDR 0xfffff904 | ||
| 724 | #define URX WORD_REF(URX_ADDR) | ||
| 725 | |||
| 726 | #define URX_RXDATA_ADDR 0xfffff905 | ||
| 727 | #define URX_RXDATA BYTE_REF(URX_RXDATA_ADDR) | ||
| 728 | |||
| 729 | #define URX_RXDATA_MASK 0x00ff /* Received data */ | ||
| 730 | #define URX_RXDATA_SHIFT 0 | ||
| 731 | #define URX_PARITY_ERROR 0x0100 /* Parity Error */ | ||
| 732 | #define URX_BREAK 0x0200 /* Break Detected */ | ||
| 733 | #define URX_FRAME_ERROR 0x0400 /* Framing Error */ | ||
| 734 | #define URX_OVRUN 0x0800 /* Serial Overrun */ | ||
| 735 | #define URX_OLD_DATA 0x1000 /* Old data in FIFO */ | ||
| 736 | #define URX_DATA_READY 0x2000 /* Data Ready (FIFO not empty) */ | ||
| 737 | #define URX_FIFO_HALF 0x4000 /* FIFO is Half-Full */ | ||
| 738 | #define URX_FIFO_FULL 0x8000 /* FIFO is Full */ | ||
| 739 | |||
| 740 | /* | ||
| 741 | * UART Transmitter Register | ||
| 742 | */ | ||
| 743 | #define UTX_ADDR 0xfffff906 | ||
| 744 | #define UTX WORD_REF(UTX_ADDR) | ||
| 745 | |||
| 746 | #define UTX_TXDATA_ADDR 0xfffff907 | ||
| 747 | #define UTX_TXDATA BYTE_REF(UTX_TXDATA_ADDR) | ||
| 748 | |||
| 749 | #define UTX_TXDATA_MASK 0x00ff /* Data to be transmitted */ | ||
| 750 | #define UTX_TXDATA_SHIFT 0 | ||
| 751 | #define UTX_CTS_DELTA 0x0100 /* CTS changed */ | ||
| 752 | #define UTX_CTS_STAT 0x0200 /* CTS State */ | ||
| 753 | #define UTX_BUSY 0x0400 /* FIFO is busy, sending a character */ | ||
| 754 | #define UTX_NOCTS 0x0800 /* Ignore CTS */ | ||
| 755 | #define UTX_SEND_BREAK 0x1000 /* Send a BREAK */ | ||
| 756 | #define UTX_TX_AVAIL 0x2000 /* Transmit FIFO has a slot available */ | ||
| 757 | #define UTX_FIFO_HALF 0x4000 /* Transmit FIFO is half empty */ | ||
| 758 | #define UTX_FIFO_EMPTY 0x8000 /* Transmit FIFO is empty */ | ||
| 759 | |||
| 760 | /* '328-compatible definitions */ | ||
| 761 | #define UTX_CTS_STATUS UTX_CTS_STAT | ||
| 762 | #define UTX_IGNORE_CTS UTX_NOCTS | ||
| 763 | |||
| 764 | /* | ||
| 765 | * UART Miscellaneous Register | ||
| 766 | */ | ||
| 767 | #define UMISC_ADDR 0xfffff908 | ||
| 768 | #define UMISC WORD_REF(UMISC_ADDR) | ||
| 769 | |||
| 770 | #define UMISC_TX_POL 0x0004 /* Transmit Polarity */ | ||
| 771 | #define UMISC_RX_POL 0x0008 /* Receive Polarity */ | ||
| 772 | #define UMISC_IRDA_LOOP 0x0010 /* IrDA Loopback Enable */ | ||
| 773 | #define UMISC_IRDA_EN 0x0020 /* Infra-Red Enable */ | ||
| 774 | #define UMISC_RTS 0x0040 /* Set RTS status */ | ||
| 775 | #define UMISC_RTSCONT 0x0080 /* Choose RTS control */ | ||
| 776 | #define UMISC_IR_TEST 0x0400 /* IRDA Test Enable */ | ||
| 777 | #define UMISC_BAUD_RESET 0x0800 /* Reset Baud Rate Generation Counters */ | ||
| 778 | #define UMISC_LOOP 0x1000 /* Serial Loopback Enable */ | ||
| 779 | #define UMISC_FORCE_PERR 0x2000 /* Force Parity Error */ | ||
| 780 | #define UMISC_CLKSRC 0x4000 /* Clock Source */ | ||
| 781 | #define UMISC_BAUD_TEST 0x8000 /* Enable Baud Test Mode */ | ||
| 782 | |||
| 783 | /* | ||
| 784 | * UART Non-integer Prescaler Register | ||
| 785 | */ | ||
| 786 | #define NIPR_ADDR 0xfffff90a | ||
| 787 | #define NIPR WORD_REF(NIPR_ADDR) | ||
| 788 | |||
| 789 | #define NIPR_STEP_VALUE_MASK 0x00ff /* NI prescaler step value */ | ||
| 790 | #define NIPR_STEP_VALUE_SHIFT 0 | ||
| 791 | #define NIPR_SELECT_MASK 0x0700 /* Tap Selection */ | ||
| 792 | #define NIPR_SELECT_SHIFT 8 | ||
| 793 | #define NIPR_PRE_SEL 0x8000 /* Non-integer prescaler select */ | ||
| 794 | |||
| 795 | |||
| 796 | /* generalization of uart control registers to support multiple ports: */ | ||
| 797 | typedef volatile struct { | ||
| 798 | volatile unsigned short int ustcnt; | ||
| 799 | volatile unsigned short int ubaud; | ||
| 800 | union { | ||
| 801 | volatile unsigned short int w; | ||
| 802 | struct { | ||
| 803 | volatile unsigned char status; | ||
| 804 | volatile unsigned char rxdata; | ||
| 805 | } b; | ||
| 806 | } urx; | ||
| 807 | union { | ||
| 808 | volatile unsigned short int w; | ||
| 809 | struct { | ||
| 810 | volatile unsigned char status; | ||
| 811 | volatile unsigned char txdata; | ||
| 812 | } b; | ||
| 813 | } utx; | ||
| 814 | volatile unsigned short int umisc; | ||
| 815 | volatile unsigned short int nipr; | ||
| 816 | volatile unsigned short int pad1; | ||
| 817 | volatile unsigned short int pad2; | ||
| 818 | } __attribute__((packed)) m68328_uart; | ||
| 819 | |||
| 820 | |||
| 821 | /********** | ||
| 822 | * | ||
| 823 | * 0xFFFFFAxx -- LCD Controller | ||
| 824 | * | ||
| 825 | **********/ | ||
| 826 | |||
| 827 | /* | ||
| 828 | * LCD Screen Starting Address Register | ||
| 829 | */ | ||
| 830 | #define LSSA_ADDR 0xfffffa00 | ||
| 831 | #define LSSA LONG_REF(LSSA_ADDR) | ||
| 832 | |||
| 833 | #define LSSA_SSA_MASK 0x1ffffffe /* Bits 0 and 29-31 are reserved */ | ||
| 834 | |||
| 835 | /* | ||
| 836 | * LCD Virtual Page Width Register | ||
| 837 | */ | ||
| 838 | #define LVPW_ADDR 0xfffffa05 | ||
| 839 | #define LVPW BYTE_REF(LVPW_ADDR) | ||
| 840 | |||
| 841 | /* | ||
| 842 | * LCD Screen Width Register (not compatible with '328 !!!) | ||
| 843 | */ | ||
| 844 | #define LXMAX_ADDR 0xfffffa08 | ||
| 845 | #define LXMAX WORD_REF(LXMAX_ADDR) | ||
| 846 | |||
| 847 | #define LXMAX_XM_MASK 0x02f0 /* Bits 0-3 and 10-15 are reserved */ | ||
| 848 | |||
| 849 | /* | ||
| 850 | * LCD Screen Height Register | ||
| 851 | */ | ||
| 852 | #define LYMAX_ADDR 0xfffffa0a | ||
| 853 | #define LYMAX WORD_REF(LYMAX_ADDR) | ||
| 854 | |||
| 855 | #define LYMAX_YM_MASK 0x01ff /* Bits 9-15 are reserved */ | ||
| 856 | |||
| 857 | /* | ||
| 858 | * LCD Cursor X Position Register | ||
| 859 | */ | ||
| 860 | #define LCXP_ADDR 0xfffffa18 | ||
| 861 | #define LCXP WORD_REF(LCXP_ADDR) | ||
| 862 | |||
| 863 | #define LCXP_CC_MASK 0xc000 /* Cursor Control */ | ||
| 864 | #define LCXP_CC_TRAMSPARENT 0x0000 | ||
| 865 | #define LCXP_CC_BLACK 0x4000 | ||
| 866 | #define LCXP_CC_REVERSED 0x8000 | ||
| 867 | #define LCXP_CC_WHITE 0xc000 | ||
| 868 | #define LCXP_CXP_MASK 0x02ff /* Cursor X position */ | ||
| 869 | |||
| 870 | /* | ||
| 871 | * LCD Cursor Y Position Register | ||
| 872 | */ | ||
| 873 | #define LCYP_ADDR 0xfffffa1a | ||
| 874 | #define LCYP WORD_REF(LCYP_ADDR) | ||
| 875 | |||
| 876 | #define LCYP_CYP_MASK 0x01ff /* Cursor Y Position */ | ||
| 877 | |||
| 878 | /* | ||
| 879 | * LCD Cursor Width and Heigth Register | ||
| 880 | */ | ||
| 881 | #define LCWCH_ADDR 0xfffffa1c | ||
| 882 | #define LCWCH WORD_REF(LCWCH_ADDR) | ||
| 883 | |||
| 884 | #define LCWCH_CH_MASK 0x001f /* Cursor Height */ | ||
| 885 | #define LCWCH_CH_SHIFT 0 | ||
| 886 | #define LCWCH_CW_MASK 0x1f00 /* Cursor Width */ | ||
| 887 | #define LCWCH_CW_SHIFT 8 | ||
| 888 | |||
| 889 | /* | ||
| 890 | * LCD Blink Control Register | ||
| 891 | */ | ||
| 892 | #define LBLKC_ADDR 0xfffffa1f | ||
| 893 | #define LBLKC BYTE_REF(LBLKC_ADDR) | ||
| 894 | |||
| 895 | #define LBLKC_BD_MASK 0x7f /* Blink Divisor */ | ||
| 896 | #define LBLKC_BD_SHIFT 0 | ||
| 897 | #define LBLKC_BKEN 0x80 /* Blink Enabled */ | ||
| 898 | |||
| 899 | /* | ||
| 900 | * LCD Panel Interface Configuration Register | ||
| 901 | */ | ||
| 902 | #define LPICF_ADDR 0xfffffa20 | ||
| 903 | #define LPICF BYTE_REF(LPICF_ADDR) | ||
| 904 | |||
| 905 | #define LPICF_GS_MASK 0x03 /* Gray-Scale Mode */ | ||
| 906 | #define LPICF_GS_BW 0x00 | ||
| 907 | #define LPICF_GS_GRAY_4 0x01 | ||
| 908 | #define LPICF_GS_GRAY_16 0x02 | ||
| 909 | #define LPICF_PBSIZ_MASK 0x0c /* Panel Bus Width */ | ||
| 910 | #define LPICF_PBSIZ_1 0x00 | ||
| 911 | #define LPICF_PBSIZ_2 0x04 | ||
| 912 | #define LPICF_PBSIZ_4 0x08 | ||
| 913 | |||
| 914 | /* | ||
| 915 | * LCD Polarity Configuration Register | ||
| 916 | */ | ||
| 917 | #define LPOLCF_ADDR 0xfffffa21 | ||
| 918 | #define LPOLCF BYTE_REF(LPOLCF_ADDR) | ||
| 919 | |||
| 920 | #define LPOLCF_PIXPOL 0x01 /* Pixel Polarity */ | ||
| 921 | #define LPOLCF_LPPOL 0x02 /* Line Pulse Polarity */ | ||
| 922 | #define LPOLCF_FLMPOL 0x04 /* Frame Marker Polarity */ | ||
| 923 | #define LPOLCF_LCKPOL 0x08 /* LCD Shift Lock Polarity */ | ||
| 924 | |||
| 925 | /* | ||
| 926 | * LACD (LCD Alternate Crystal Direction) Rate Control Register | ||
| 927 | */ | ||
| 928 | #define LACDRC_ADDR 0xfffffa23 | ||
| 929 | #define LACDRC BYTE_REF(LACDRC_ADDR) | ||
| 930 | |||
| 931 | #define LACDRC_ACDSLT 0x80 /* Signal Source Select */ | ||
| 932 | #define LACDRC_ACD_MASK 0x0f /* Alternate Crystal Direction Control */ | ||
| 933 | #define LACDRC_ACD_SHIFT 0 | ||
| 934 | |||
| 935 | /* | ||
| 936 | * LCD Pixel Clock Divider Register | ||
| 937 | */ | ||
| 938 | #define LPXCD_ADDR 0xfffffa25 | ||
| 939 | #define LPXCD BYTE_REF(LPXCD_ADDR) | ||
| 940 | |||
| 941 | #define LPXCD_PCD_MASK 0x3f /* Pixel Clock Divider */ | ||
| 942 | #define LPXCD_PCD_SHIFT 0 | ||
| 943 | |||
| 944 | /* | ||
| 945 | * LCD Clocking Control Register | ||
| 946 | */ | ||
| 947 | #define LCKCON_ADDR 0xfffffa27 | ||
| 948 | #define LCKCON BYTE_REF(LCKCON_ADDR) | ||
| 949 | |||
| 950 | #define LCKCON_DWS_MASK 0x0f /* Display Wait-State */ | ||
| 951 | #define LCKCON_DWS_SHIFT 0 | ||
| 952 | #define LCKCON_DWIDTH 0x40 /* Display Memory Width */ | ||
| 953 | #define LCKCON_LCDON 0x80 /* Enable LCD Controller */ | ||
| 954 | |||
| 955 | /* '328-compatible definitions */ | ||
| 956 | #define LCKCON_DW_MASK LCKCON_DWS_MASK | ||
| 957 | #define LCKCON_DW_SHIFT LCKCON_DWS_SHIFT | ||
| 958 | |||
| 959 | /* | ||
| 960 | * LCD Refresh Rate Adjustment Register | ||
| 961 | */ | ||
| 962 | #define LRRA_ADDR 0xfffffa29 | ||
| 963 | #define LRRA BYTE_REF(LRRA_ADDR) | ||
| 964 | |||
| 965 | /* | ||
| 966 | * LCD Panning Offset Register | ||
| 967 | */ | ||
| 968 | #define LPOSR_ADDR 0xfffffa2d | ||
| 969 | #define LPOSR BYTE_REF(LPOSR_ADDR) | ||
| 970 | |||
| 971 | #define LPOSR_POS_MASK 0x0f /* Pixel Offset Code */ | ||
| 972 | #define LPOSR_POS_SHIFT 0 | ||
| 973 | |||
| 974 | /* | ||
| 975 | * LCD Frame Rate Control Modulation Register | ||
| 976 | */ | ||
| 977 | #define LFRCM_ADDR 0xfffffa31 | ||
| 978 | #define LFRCM BYTE_REF(LFRCM_ADDR) | ||
| 979 | |||
| 980 | #define LFRCM_YMOD_MASK 0x0f /* Vertical Modulation */ | ||
| 981 | #define LFRCM_YMOD_SHIFT 0 | ||
| 982 | #define LFRCM_XMOD_MASK 0xf0 /* Horizontal Modulation */ | ||
| 983 | #define LFRCM_XMOD_SHIFT 4 | ||
| 984 | |||
| 985 | /* | ||
| 986 | * LCD Gray Palette Mapping Register | ||
| 987 | */ | ||
| 988 | #define LGPMR_ADDR 0xfffffa33 | ||
| 989 | #define LGPMR BYTE_REF(LGPMR_ADDR) | ||
| 990 | |||
| 991 | #define LGPMR_G1_MASK 0x0f | ||
| 992 | #define LGPMR_G1_SHIFT 0 | ||
| 993 | #define LGPMR_G2_MASK 0xf0 | ||
| 994 | #define LGPMR_G2_SHIFT 4 | ||
| 995 | |||
| 996 | /* | ||
| 997 | * PWM Contrast Control Register | ||
| 998 | */ | ||
| 999 | #define PWMR_ADDR 0xfffffa36 | ||
| 1000 | #define PWMR WORD_REF(PWMR_ADDR) | ||
| 1001 | |||
| 1002 | #define PWMR_PW_MASK 0x00ff /* Pulse Width */ | ||
| 1003 | #define PWMR_PW_SHIFT 0 | ||
| 1004 | #define PWMR_CCPEN 0x0100 /* Contrast Control Enable */ | ||
| 1005 | #define PWMR_SRC_MASK 0x0600 /* Input Clock Source */ | ||
| 1006 | #define PWMR_SRC_LINE 0x0000 /* Line Pulse */ | ||
| 1007 | #define PWMR_SRC_PIXEL 0x0200 /* Pixel Clock */ | ||
| 1008 | #define PWMR_SRC_LCD 0x4000 /* LCD clock */ | ||
| 1009 | |||
| 1010 | /********** | ||
| 1011 | * | ||
| 1012 | * 0xFFFFFBxx -- Real-Time Clock (RTC) | ||
| 1013 | * | ||
| 1014 | **********/ | ||
| 1015 | |||
| 1016 | /* | ||
| 1017 | * RTC Hours Minutes and Seconds Register | ||
| 1018 | */ | ||
| 1019 | #define RTCTIME_ADDR 0xfffffb00 | ||
| 1020 | #define RTCTIME LONG_REF(RTCTIME_ADDR) | ||
| 1021 | |||
| 1022 | #define RTCTIME_SECONDS_MASK 0x0000003f /* Seconds */ | ||
| 1023 | #define RTCTIME_SECONDS_SHIFT 0 | ||
| 1024 | #define RTCTIME_MINUTES_MASK 0x003f0000 /* Minutes */ | ||
| 1025 | #define RTCTIME_MINUTES_SHIFT 16 | ||
| 1026 | #define RTCTIME_HOURS_MASK 0x1f000000 /* Hours */ | ||
| 1027 | #define RTCTIME_HOURS_SHIFT 24 | ||
| 1028 | |||
| 1029 | /* | ||
| 1030 | * RTC Alarm Register | ||
| 1031 | */ | ||
| 1032 | #define RTCALRM_ADDR 0xfffffb04 | ||
| 1033 | #define RTCALRM LONG_REF(RTCALRM_ADDR) | ||
| 1034 | |||
| 1035 | #define RTCALRM_SECONDS_MASK 0x0000003f /* Seconds */ | ||
| 1036 | #define RTCALRM_SECONDS_SHIFT 0 | ||
| 1037 | #define RTCALRM_MINUTES_MASK 0x003f0000 /* Minutes */ | ||
| 1038 | #define RTCALRM_MINUTES_SHIFT 16 | ||
| 1039 | #define RTCALRM_HOURS_MASK 0x1f000000 /* Hours */ | ||
| 1040 | #define RTCALRM_HOURS_SHIFT 24 | ||
| 1041 | |||
| 1042 | /* | ||
| 1043 | * Watchdog Timer Register | ||
| 1044 | */ | ||
| 1045 | #define WATCHDOG_ADDR 0xfffffb0a | ||
| 1046 | #define WATCHDOG WORD_REF(WATCHDOG_ADDR) | ||
| 1047 | |||
| 1048 | #define WATCHDOG_EN 0x0001 /* Watchdog Enabled */ | ||
| 1049 | #define WATCHDOG_ISEL 0x0002 /* Select the watchdog interrupt */ | ||
| 1050 | #define WATCHDOG_INTF 0x0080 /* Watchdog interrupt occcured */ | ||
| 1051 | #define WATCHDOG_CNT_MASK 0x0300 /* Watchdog Counter */ | ||
| 1052 | #define WATCHDOG_CNT_SHIFT 8 | ||
| 1053 | |||
| 1054 | /* | ||
| 1055 | * RTC Control Register | ||
| 1056 | */ | ||
| 1057 | #define RTCCTL_ADDR 0xfffffb0c | ||
| 1058 | #define RTCCTL WORD_REF(RTCCTL_ADDR) | ||
| 1059 | |||
| 1060 | #define RTCCTL_XTL 0x0020 /* Crystal Selection */ | ||
| 1061 | #define RTCCTL_EN 0x0080 /* RTC Enable */ | ||
| 1062 | |||
| 1063 | /* '328-compatible definitions */ | ||
| 1064 | #define RTCCTL_384 RTCCTL_XTL | ||
| 1065 | #define RTCCTL_ENABLE RTCCTL_EN | ||
| 1066 | |||
| 1067 | /* | ||
| 1068 | * RTC Interrupt Status Register | ||
| 1069 | */ | ||
| 1070 | #define RTCISR_ADDR 0xfffffb0e | ||
| 1071 | #define RTCISR WORD_REF(RTCISR_ADDR) | ||
| 1072 | |||
| 1073 | #define RTCISR_SW 0x0001 /* Stopwatch timed out */ | ||
| 1074 | #define RTCISR_MIN 0x0002 /* 1-minute interrupt has occurred */ | ||
| 1075 | #define RTCISR_ALM 0x0004 /* Alarm interrupt has occurred */ | ||
| 1076 | #define RTCISR_DAY 0x0008 /* 24-hour rollover interrupt has occurred */ | ||
| 1077 | #define RTCISR_1HZ 0x0010 /* 1Hz interrupt has occurred */ | ||
| 1078 | #define RTCISR_HR 0x0020 /* 1-hour interrupt has occurred */ | ||
| 1079 | #define RTCISR_SAM0 0x0100 /* 4Hz / 4.6875Hz interrupt has occurred */ | ||
| 1080 | #define RTCISR_SAM1 0x0200 /* 8Hz / 9.3750Hz interrupt has occurred */ | ||
| 1081 | #define RTCISR_SAM2 0x0400 /* 16Hz / 18.7500Hz interrupt has occurred */ | ||
| 1082 | #define RTCISR_SAM3 0x0800 /* 32Hz / 37.5000Hz interrupt has occurred */ | ||
| 1083 | #define RTCISR_SAM4 0x1000 /* 64Hz / 75.0000Hz interrupt has occurred */ | ||
| 1084 | #define RTCISR_SAM5 0x2000 /* 128Hz / 150.0000Hz interrupt has occurred */ | ||
| 1085 | #define RTCISR_SAM6 0x4000 /* 256Hz / 300.0000Hz interrupt has occurred */ | ||
| 1086 | #define RTCISR_SAM7 0x8000 /* 512Hz / 600.0000Hz interrupt has occurred */ | ||
| 1087 | |||
| 1088 | /* | ||
| 1089 | * RTC Interrupt Enable Register | ||
| 1090 | */ | ||
| 1091 | #define RTCIENR_ADDR 0xfffffb10 | ||
| 1092 | #define RTCIENR WORD_REF(RTCIENR_ADDR) | ||
| 1093 | |||
| 1094 | #define RTCIENR_SW 0x0001 /* Stopwatch interrupt enable */ | ||
| 1095 | #define RTCIENR_MIN 0x0002 /* 1-minute interrupt enable */ | ||
| 1096 | #define RTCIENR_ALM 0x0004 /* Alarm interrupt enable */ | ||
| 1097 | #define RTCIENR_DAY 0x0008 /* 24-hour rollover interrupt enable */ | ||
| 1098 | #define RTCIENR_1HZ 0x0010 /* 1Hz interrupt enable */ | ||
| 1099 | #define RTCIENR_HR 0x0020 /* 1-hour interrupt enable */ | ||
| 1100 | #define RTCIENR_SAM0 0x0100 /* 4Hz / 4.6875Hz interrupt enable */ | ||
| 1101 | #define RTCIENR_SAM1 0x0200 /* 8Hz / 9.3750Hz interrupt enable */ | ||
| 1102 | #define RTCIENR_SAM2 0x0400 /* 16Hz / 18.7500Hz interrupt enable */ | ||
| 1103 | #define RTCIENR_SAM3 0x0800 /* 32Hz / 37.5000Hz interrupt enable */ | ||
| 1104 | #define RTCIENR_SAM4 0x1000 /* 64Hz / 75.0000Hz interrupt enable */ | ||
| 1105 | #define RTCIENR_SAM5 0x2000 /* 128Hz / 150.0000Hz interrupt enable */ | ||
| 1106 | #define RTCIENR_SAM6 0x4000 /* 256Hz / 300.0000Hz interrupt enable */ | ||
| 1107 | #define RTCIENR_SAM7 0x8000 /* 512Hz / 600.0000Hz interrupt enable */ | ||
| 1108 | |||
| 1109 | /* | ||
| 1110 | * Stopwatch Minutes Register | ||
| 1111 | */ | ||
| 1112 | #define STPWCH_ADDR 0xfffffb12 | ||
| 1113 | #define STPWCH WORD_REF(STPWCH) | ||
| 1114 | |||
| 1115 | #define STPWCH_CNT_MASK 0x003f /* Stopwatch countdown value */ | ||
| 1116 | #define SPTWCH_CNT_SHIFT 0 | ||
| 1117 | |||
| 1118 | /* | ||
| 1119 | * RTC Day Count Register | ||
| 1120 | */ | ||
| 1121 | #define DAYR_ADDR 0xfffffb1a | ||
| 1122 | #define DAYR WORD_REF(DAYR_ADDR) | ||
| 1123 | |||
| 1124 | #define DAYR_DAYS_MASK 0x1ff /* Day Setting */ | ||
| 1125 | #define DAYR_DAYS_SHIFT 0 | ||
| 1126 | |||
| 1127 | /* | ||
| 1128 | * RTC Day Alarm Register | ||
| 1129 | */ | ||
| 1130 | #define DAYALARM_ADDR 0xfffffb1c | ||
| 1131 | #define DAYALARM WORD_REF(DAYALARM_ADDR) | ||
| 1132 | |||
| 1133 | #define DAYALARM_DAYSAL_MASK 0x01ff /* Day Setting of the Alarm */ | ||
| 1134 | #define DAYALARM_DAYSAL_SHIFT 0 | ||
| 1135 | |||
| 1136 | /********** | ||
| 1137 | * | ||
| 1138 | * 0xFFFFFCxx -- DRAM Controller | ||
| 1139 | * | ||
| 1140 | **********/ | ||
| 1141 | |||
| 1142 | /* | ||
| 1143 | * DRAM Memory Configuration Register | ||
| 1144 | */ | ||
| 1145 | #define DRAMMC_ADDR 0xfffffc00 | ||
| 1146 | #define DRAMMC WORD_REF(DRAMMC_ADDR) | ||
| 1147 | |||
| 1148 | #define DRAMMC_ROW12_MASK 0xc000 /* Row address bit for MD12 */ | ||
| 1149 | #define DRAMMC_ROW12_PA10 0x0000 | ||
| 1150 | #define DRAMMC_ROW12_PA21 0x4000 | ||
| 1151 | #define DRAMMC_ROW12_PA23 0x8000 | ||
| 1152 | #define DRAMMC_ROW0_MASK 0x3000 /* Row address bit for MD0 */ | ||
| 1153 | #define DRAMMC_ROW0_PA11 0x0000 | ||
| 1154 | #define DRAMMC_ROW0_PA22 0x1000 | ||
| 1155 | #define DRAMMC_ROW0_PA23 0x2000 | ||
| 1156 | #define DRAMMC_ROW11 0x0800 /* Row address bit for MD11 PA20/PA22 */ | ||
| 1157 | #define DRAMMC_ROW10 0x0400 /* Row address bit for MD10 PA19/PA21 */ | ||
| 1158 | #define DRAMMC_ROW9 0x0200 /* Row address bit for MD9 PA9/PA19 */ | ||
| 1159 | #define DRAMMC_ROW8 0x0100 /* Row address bit for MD8 PA10/PA20 */ | ||
| 1160 | #define DRAMMC_COL10 0x0080 /* Col address bit for MD10 PA11/PA0 */ | ||
| 1161 | #define DRAMMC_COL9 0x0040 /* Col address bit for MD9 PA10/PA0 */ | ||
| 1162 | #define DRAMMC_COL8 0x0020 /* Col address bit for MD8 PA9/PA0 */ | ||
| 1163 | #define DRAMMC_REF_MASK 0x001f /* Reresh Cycle */ | ||
| 1164 | #define DRAMMC_REF_SHIFT 0 | ||
| 1165 | |||
| 1166 | /* | ||
| 1167 | * DRAM Control Register | ||
| 1168 | */ | ||
| 1169 | #define DRAMC_ADDR 0xfffffc02 | ||
| 1170 | #define DRAMC WORD_REF(DRAMC_ADDR) | ||
| 1171 | |||
| 1172 | #define DRAMC_DWE 0x0001 /* DRAM Write Enable */ | ||
| 1173 | #define DRAMC_RST 0x0002 /* Reset Burst Refresh Enable */ | ||
| 1174 | #define DRAMC_LPR 0x0004 /* Low-Power Refresh Enable */ | ||
| 1175 | #define DRAMC_SLW 0x0008 /* Slow RAM */ | ||
| 1176 | #define DRAMC_LSP 0x0010 /* Light Sleep */ | ||
| 1177 | #define DRAMC_MSW 0x0020 /* Slow Multiplexing */ | ||
| 1178 | #define DRAMC_WS_MASK 0x00c0 /* Wait-states */ | ||
| 1179 | #define DRAMC_WS_SHIFT 6 | ||
| 1180 | #define DRAMC_PGSZ_MASK 0x0300 /* Page Size for fast page mode */ | ||
| 1181 | #define DRAMC_PGSZ_SHIFT 8 | ||
| 1182 | #define DRAMC_PGSZ_256K 0x0000 | ||
| 1183 | #define DRAMC_PGSZ_512K 0x0100 | ||
| 1184 | #define DRAMC_PGSZ_1024K 0x0200 | ||
| 1185 | #define DRAMC_PGSZ_2048K 0x0300 | ||
| 1186 | #define DRAMC_EDO 0x0400 /* EDO DRAM */ | ||
| 1187 | #define DRAMC_CLK 0x0800 /* Refresh Timer Clock source select */ | ||
| 1188 | #define DRAMC_BC_MASK 0x3000 /* Page Access Clock Cycle (FP mode) */ | ||
| 1189 | #define DRAMC_BC_SHIFT 12 | ||
| 1190 | #define DRAMC_RM 0x4000 /* Refresh Mode */ | ||
| 1191 | #define DRAMC_EN 0x8000 /* DRAM Controller enable */ | ||
| 1192 | |||
| 1193 | |||
| 1194 | /********** | ||
| 1195 | * | ||
| 1196 | * 0xFFFFFDxx -- In-Circuit Emulation (ICE) | ||
| 1197 | * | ||
| 1198 | **********/ | ||
| 1199 | |||
| 1200 | /* | ||
| 1201 | * ICE Module Address Compare Register | ||
| 1202 | */ | ||
| 1203 | #define ICEMACR_ADDR 0xfffffd00 | ||
| 1204 | #define ICEMACR LONG_REF(ICEMACR_ADDR) | ||
| 1205 | |||
| 1206 | /* | ||
| 1207 | * ICE Module Address Mask Register | ||
| 1208 | */ | ||
| 1209 | #define ICEMAMR_ADDR 0xfffffd04 | ||
| 1210 | #define ICEMAMR LONG_REF(ICEMAMR_ADDR) | ||
| 1211 | |||
| 1212 | /* | ||
| 1213 | * ICE Module Control Compare Register | ||
| 1214 | */ | ||
| 1215 | #define ICEMCCR_ADDR 0xfffffd08 | ||
| 1216 | #define ICEMCCR WORD_REF(ICEMCCR_ADDR) | ||
| 1217 | |||
| 1218 | #define ICEMCCR_PD 0x0001 /* Program/Data Cycle Selection */ | ||
| 1219 | #define ICEMCCR_RW 0x0002 /* Read/Write Cycle Selection */ | ||
| 1220 | |||
| 1221 | /* | ||
| 1222 | * ICE Module Control Mask Register | ||
| 1223 | */ | ||
| 1224 | #define ICEMCMR_ADDR 0xfffffd0a | ||
| 1225 | #define ICEMCMR WORD_REF(ICEMCMR_ADDR) | ||
| 1226 | |||
| 1227 | #define ICEMCMR_PDM 0x0001 /* Program/Data Cycle Mask */ | ||
| 1228 | #define ICEMCMR_RWM 0x0002 /* Read/Write Cycle Mask */ | ||
| 1229 | |||
| 1230 | /* | ||
| 1231 | * ICE Module Control Register | ||
| 1232 | */ | ||
| 1233 | #define ICEMCR_ADDR 0xfffffd0c | ||
| 1234 | #define ICEMCR WORD_REF(ICEMCR_ADDR) | ||
| 1235 | |||
| 1236 | #define ICEMCR_CEN 0x0001 /* Compare Enable */ | ||
| 1237 | #define ICEMCR_PBEN 0x0002 /* Program Break Enable */ | ||
| 1238 | #define ICEMCR_SB 0x0004 /* Single Breakpoint */ | ||
| 1239 | #define ICEMCR_HMDIS 0x0008 /* HardMap disable */ | ||
| 1240 | #define ICEMCR_BBIEN 0x0010 /* Bus Break Interrupt Enable */ | ||
| 1241 | |||
| 1242 | /* | ||
| 1243 | * ICE Module Status Register | ||
| 1244 | */ | ||
| 1245 | #define ICEMSR_ADDR 0xfffffd0e | ||
| 1246 | #define ICEMSR WORD_REF(ICEMSR_ADDR) | ||
| 1247 | |||
| 1248 | #define ICEMSR_EMUEN 0x0001 /* Emulation Enable */ | ||
| 1249 | #define ICEMSR_BRKIRQ 0x0002 /* A-Line Vector Fetch Detected */ | ||
| 1250 | #define ICEMSR_BBIRQ 0x0004 /* Bus Break Interrupt Detected */ | ||
| 1251 | #define ICEMSR_EMIRQ 0x0008 /* EMUIRQ Falling Edge Detected */ | ||
| 1252 | |||
| 1253 | #endif /* _MC68EZ328_H_ */ | ||
diff --git a/arch/m68knommu/include/asm/MC68VZ328.h b/arch/m68knommu/include/asm/MC68VZ328.h deleted file mode 100644 index 2b9bf626a0a5..000000000000 --- a/arch/m68knommu/include/asm/MC68VZ328.h +++ /dev/null | |||
| @@ -1,1349 +0,0 @@ | |||
| 1 | |||
| 2 | /* include/asm-m68knommu/MC68VZ328.h: 'VZ328 control registers | ||
| 3 | * | ||
| 4 | * Copyright (c) 2000-2001 Lineo Inc. <www.lineo.com> | ||
| 5 | * Copyright (c) 2000-2001 Lineo Canada Corp. <www.lineo.ca> | ||
| 6 | * Copyright (C) 1999 Vladimir Gurevich <vgurevic@cisco.com> | ||
| 7 | * Bare & Hare Software, Inc. | ||
| 8 | * Based on include/asm-m68knommu/MC68332.h | ||
| 9 | * Copyright (C) 1998 Kenneth Albanowski <kjahds@kjahds.com>, | ||
| 10 | * The Silver Hammer Group, Ltd. | ||
| 11 | * | ||
| 12 | * M68VZ328 fixes by Evan Stawnyczy <evan@lineo.com> | ||
| 13 | * vz multiport fixes by Michael Leslie <mleslie@lineo.com> | ||
| 14 | */ | ||
| 15 | |||
| 16 | #ifndef _MC68VZ328_H_ | ||
| 17 | #define _MC68VZ328_H_ | ||
| 18 | |||
| 19 | #define BYTE_REF(addr) (*((volatile unsigned char*)addr)) | ||
| 20 | #define WORD_REF(addr) (*((volatile unsigned short*)addr)) | ||
| 21 | #define LONG_REF(addr) (*((volatile unsigned long*)addr)) | ||
| 22 | |||
| 23 | #define PUT_FIELD(field, val) (((val) << field##_SHIFT) & field##_MASK) | ||
| 24 | #define GET_FIELD(reg, field) (((reg) & field##_MASK) >> field##_SHIFT) | ||
| 25 | |||
| 26 | /********** | ||
| 27 | * | ||
| 28 | * 0xFFFFF0xx -- System Control | ||
| 29 | * | ||
| 30 | **********/ | ||
| 31 | |||
| 32 | /* | ||
| 33 | * System Control Register (SCR) | ||
| 34 | */ | ||
| 35 | #define SCR_ADDR 0xfffff000 | ||
| 36 | #define SCR BYTE_REF(SCR_ADDR) | ||
| 37 | |||
| 38 | #define SCR_WDTH8 0x01 /* 8-Bit Width Select */ | ||
| 39 | #define SCR_DMAP 0x04 /* Double Map */ | ||
| 40 | #define SCR_SO 0x08 /* Supervisor Only */ | ||
| 41 | #define SCR_BETEN 0x10 /* Bus-Error Time-Out Enable */ | ||
| 42 | #define SCR_PRV 0x20 /* Privilege Violation */ | ||
| 43 | #define SCR_WPV 0x40 /* Write Protect Violation */ | ||
| 44 | #define SCR_BETO 0x80 /* Bus-Error TimeOut */ | ||
| 45 | |||
| 46 | /* | ||
| 47 | * Silicon ID Register (Mask Revision Register (MRR) for '328 Compatibility) | ||
| 48 | */ | ||
| 49 | #define MRR_ADDR 0xfffff004 | ||
| 50 | #define MRR LONG_REF(MRR_ADDR) | ||
| 51 | |||
| 52 | /********** | ||
| 53 | * | ||
| 54 | * 0xFFFFF1xx -- Chip-Select logic | ||
| 55 | * | ||
| 56 | **********/ | ||
| 57 | |||
| 58 | /* | ||
| 59 | * Chip Select Group Base Registers | ||
| 60 | */ | ||
| 61 | #define CSGBA_ADDR 0xfffff100 | ||
| 62 | #define CSGBB_ADDR 0xfffff102 | ||
| 63 | |||
| 64 | #define CSGBC_ADDR 0xfffff104 | ||
| 65 | #define CSGBD_ADDR 0xfffff106 | ||
| 66 | |||
| 67 | #define CSGBA WORD_REF(CSGBA_ADDR) | ||
| 68 | #define CSGBB WORD_REF(CSGBB_ADDR) | ||
| 69 | #define CSGBC WORD_REF(CSGBC_ADDR) | ||
| 70 | #define CSGBD WORD_REF(CSGBD_ADDR) | ||
| 71 | |||
| 72 | /* | ||
| 73 | * Chip Select Registers | ||
| 74 | */ | ||
| 75 | #define CSA_ADDR 0xfffff110 | ||
| 76 | #define CSB_ADDR 0xfffff112 | ||
| 77 | #define CSC_ADDR 0xfffff114 | ||
| 78 | #define CSD_ADDR 0xfffff116 | ||
| 79 | |||
| 80 | #define CSA WORD_REF(CSA_ADDR) | ||
| 81 | #define CSB WORD_REF(CSB_ADDR) | ||
| 82 | #define CSC WORD_REF(CSC_ADDR) | ||
| 83 | #define CSD WORD_REF(CSD_ADDR) | ||
| 84 | |||
| 85 | #define CSA_EN 0x0001 /* Chip-Select Enable */ | ||
| 86 | #define CSA_SIZ_MASK 0x000e /* Chip-Select Size */ | ||
| 87 | #define CSA_SIZ_SHIFT 1 | ||
| 88 | #define CSA_WS_MASK 0x0070 /* Wait State */ | ||
| 89 | #define CSA_WS_SHIFT 4 | ||
| 90 | #define CSA_BSW 0x0080 /* Data Bus Width */ | ||
| 91 | #define CSA_FLASH 0x0100 /* FLASH Memory Support */ | ||
| 92 | #define CSA_RO 0x8000 /* Read-Only */ | ||
| 93 | |||
| 94 | #define CSB_EN 0x0001 /* Chip-Select Enable */ | ||
| 95 | #define CSB_SIZ_MASK 0x000e /* Chip-Select Size */ | ||
| 96 | #define CSB_SIZ_SHIFT 1 | ||
| 97 | #define CSB_WS_MASK 0x0070 /* Wait State */ | ||
| 98 | #define CSB_WS_SHIFT 4 | ||
| 99 | #define CSB_BSW 0x0080 /* Data Bus Width */ | ||
| 100 | #define CSB_FLASH 0x0100 /* FLASH Memory Support */ | ||
| 101 | #define CSB_UPSIZ_MASK 0x1800 /* Unprotected memory block size */ | ||
| 102 | #define CSB_UPSIZ_SHIFT 11 | ||
| 103 | #define CSB_ROP 0x2000 /* Readonly if protected */ | ||
| 104 | #define CSB_SOP 0x4000 /* Supervisor only if protected */ | ||
| 105 | #define CSB_RO 0x8000 /* Read-Only */ | ||
| 106 | |||
| 107 | #define CSC_EN 0x0001 /* Chip-Select Enable */ | ||
| 108 | #define CSC_SIZ_MASK 0x000e /* Chip-Select Size */ | ||
| 109 | #define CSC_SIZ_SHIFT 1 | ||
| 110 | #define CSC_WS_MASK 0x0070 /* Wait State */ | ||
| 111 | #define CSC_WS_SHIFT 4 | ||
| 112 | #define CSC_BSW 0x0080 /* Data Bus Width */ | ||
| 113 | #define CSC_FLASH 0x0100 /* FLASH Memory Support */ | ||
| 114 | #define CSC_UPSIZ_MASK 0x1800 /* Unprotected memory block size */ | ||
| 115 | #define CSC_UPSIZ_SHIFT 11 | ||
| 116 | #define CSC_ROP 0x2000 /* Readonly if protected */ | ||
| 117 | #define CSC_SOP 0x4000 /* Supervisor only if protected */ | ||
| 118 | #define CSC_RO 0x8000 /* Read-Only */ | ||
| 119 | |||
| 120 | #define CSD_EN 0x0001 /* Chip-Select Enable */ | ||
| 121 | #define CSD_SIZ_MASK 0x000e /* Chip-Select Size */ | ||
| 122 | #define CSD_SIZ_SHIFT 1 | ||
| 123 | #define CSD_WS_MASK 0x0070 /* Wait State */ | ||
| 124 | #define CSD_WS_SHIFT 4 | ||
| 125 | #define CSD_BSW 0x0080 /* Data Bus Width */ | ||
| 126 | #define CSD_FLASH 0x0100 /* FLASH Memory Support */ | ||
| 127 | #define CSD_DRAM 0x0200 /* Dram Selection */ | ||
| 128 | #define CSD_COMB 0x0400 /* Combining */ | ||
| 129 | #define CSD_UPSIZ_MASK 0x1800 /* Unprotected memory block size */ | ||
| 130 | #define CSD_UPSIZ_SHIFT 11 | ||
| 131 | #define CSD_ROP 0x2000 /* Readonly if protected */ | ||
| 132 | #define CSD_SOP 0x4000 /* Supervisor only if protected */ | ||
| 133 | #define CSD_RO 0x8000 /* Read-Only */ | ||
| 134 | |||
| 135 | /* | ||
| 136 | * Emulation Chip-Select Register | ||
| 137 | */ | ||
| 138 | #define EMUCS_ADDR 0xfffff118 | ||
| 139 | #define EMUCS WORD_REF(EMUCS_ADDR) | ||
| 140 | |||
| 141 | #define EMUCS_WS_MASK 0x0070 | ||
| 142 | #define EMUCS_WS_SHIFT 4 | ||
| 143 | |||
| 144 | /********** | ||
| 145 | * | ||
| 146 | * 0xFFFFF2xx -- Phase Locked Loop (PLL) & Power Control | ||
| 147 | * | ||
| 148 | **********/ | ||
| 149 | |||
| 150 | /* | ||
| 151 | * PLL Control Register | ||
| 152 | */ | ||
| 153 | #define PLLCR_ADDR 0xfffff200 | ||
| 154 | #define PLLCR WORD_REF(PLLCR_ADDR) | ||
| 155 | |||
| 156 | #define PLLCR_DISPLL 0x0008 /* Disable PLL */ | ||
| 157 | #define PLLCR_CLKEN 0x0010 /* Clock (CLKO pin) enable */ | ||
| 158 | #define PLLCR_PRESC 0x0020 /* VCO prescaler */ | ||
| 159 | #define PLLCR_SYSCLK_SEL_MASK 0x0700 /* System Clock Selection */ | ||
| 160 | #define PLLCR_SYSCLK_SEL_SHIFT 8 | ||
| 161 | #define PLLCR_LCDCLK_SEL_MASK 0x3800 /* LCD Clock Selection */ | ||
| 162 | #define PLLCR_LCDCLK_SEL_SHIFT 11 | ||
| 163 | |||
| 164 | /* '328-compatible definitions */ | ||
| 165 | #define PLLCR_PIXCLK_SEL_MASK PLLCR_LCDCLK_SEL_MASK | ||
| 166 | #define PLLCR_PIXCLK_SEL_SHIFT PLLCR_LCDCLK_SEL_SHIFT | ||
| 167 | |||
| 168 | /* | ||
| 169 | * PLL Frequency Select Register | ||
| 170 | */ | ||
| 171 | #define PLLFSR_ADDR 0xfffff202 | ||
| 172 | #define PLLFSR WORD_REF(PLLFSR_ADDR) | ||
| 173 | |||
| 174 | #define PLLFSR_PC_MASK 0x00ff /* P Count */ | ||
| 175 | #define PLLFSR_PC_SHIFT 0 | ||
| 176 | #define PLLFSR_QC_MASK 0x0f00 /* Q Count */ | ||
| 177 | #define PLLFSR_QC_SHIFT 8 | ||
| 178 | #define PLLFSR_PROT 0x4000 /* Protect P & Q */ | ||
| 179 | #define PLLFSR_CLK32 0x8000 /* Clock 32 (kHz) */ | ||
| 180 | |||
| 181 | /* | ||
| 182 | * Power Control Register | ||
| 183 | */ | ||
| 184 | #define PCTRL_ADDR 0xfffff207 | ||
| 185 | #define PCTRL BYTE_REF(PCTRL_ADDR) | ||
| 186 | |||
| 187 | #define PCTRL_WIDTH_MASK 0x1f /* CPU Clock bursts width */ | ||
| 188 | #define PCTRL_WIDTH_SHIFT 0 | ||
| 189 | #define PCTRL_PCEN 0x80 /* Power Control Enable */ | ||
| 190 | |||
| 191 | /********** | ||
| 192 | * | ||
| 193 | * 0xFFFFF3xx -- Interrupt Controller | ||
| 194 | * | ||
| 195 | **********/ | ||
| 196 | |||
| 197 | /* | ||
| 198 | * Interrupt Vector Register | ||
| 199 | */ | ||
| 200 | #define IVR_ADDR 0xfffff300 | ||
| 201 | #define IVR BYTE_REF(IVR_ADDR) | ||
| 202 | |||
| 203 | #define IVR_VECTOR_MASK 0xF8 | ||
| 204 | |||
| 205 | /* | ||
| 206 | * Interrupt control Register | ||
| 207 | */ | ||
| 208 | #define ICR_ADDR 0xfffff302 | ||
| 209 | #define ICR WORD_REF(ICR_ADDR) | ||
| 210 | |||
| 211 | #define ICR_POL5 0x0080 /* Polarity Control for IRQ5 */ | ||
| 212 | #define ICR_ET6 0x0100 /* Edge Trigger Select for IRQ6 */ | ||
| 213 | #define ICR_ET3 0x0200 /* Edge Trigger Select for IRQ3 */ | ||
| 214 | #define ICR_ET2 0x0400 /* Edge Trigger Select for IRQ2 */ | ||
| 215 | #define ICR_ET1 0x0800 /* Edge Trigger Select for IRQ1 */ | ||
| 216 | #define ICR_POL6 0x1000 /* Polarity Control for IRQ6 */ | ||
| 217 | #define ICR_POL3 0x2000 /* Polarity Control for IRQ3 */ | ||
| 218 | #define ICR_POL2 0x4000 /* Polarity Control for IRQ2 */ | ||
| 219 | #define ICR_POL1 0x8000 /* Polarity Control for IRQ1 */ | ||
| 220 | |||
| 221 | /* | ||
| 222 | * Interrupt Mask Register | ||
| 223 | */ | ||
| 224 | #define IMR_ADDR 0xfffff304 | ||
| 225 | #define IMR LONG_REF(IMR_ADDR) | ||
| 226 | |||
| 227 | /* | ||
| 228 | * Define the names for bit positions first. This is useful for | ||
| 229 | * request_irq | ||
| 230 | */ | ||
| 231 | #define SPI2_IRQ_NUM 0 /* SPI 2 interrupt */ | ||
| 232 | #define TMR_IRQ_NUM 1 /* Timer 1 interrupt */ | ||
| 233 | #define UART1_IRQ_NUM 2 /* UART 1 interrupt */ | ||
| 234 | #define WDT_IRQ_NUM 3 /* Watchdog Timer interrupt */ | ||
| 235 | #define RTC_IRQ_NUM 4 /* RTC interrupt */ | ||
| 236 | #define TMR2_IRQ_NUM 5 /* Timer 2 interrupt */ | ||
| 237 | #define KB_IRQ_NUM 6 /* Keyboard Interrupt */ | ||
| 238 | #define PWM1_IRQ_NUM 7 /* Pulse-Width Modulator 1 int. */ | ||
| 239 | #define INT0_IRQ_NUM 8 /* External INT0 */ | ||
| 240 | #define INT1_IRQ_NUM 9 /* External INT1 */ | ||
| 241 | #define INT2_IRQ_NUM 10 /* External INT2 */ | ||
| 242 | #define INT3_IRQ_NUM 11 /* External INT3 */ | ||
| 243 | #define UART2_IRQ_NUM 12 /* UART 2 interrupt */ | ||
| 244 | #define PWM2_IRQ_NUM 13 /* Pulse-Width Modulator 1 int. */ | ||
| 245 | #define IRQ1_IRQ_NUM 16 /* IRQ1 */ | ||
| 246 | #define IRQ2_IRQ_NUM 17 /* IRQ2 */ | ||
| 247 | #define IRQ3_IRQ_NUM 18 /* IRQ3 */ | ||
| 248 | #define IRQ6_IRQ_NUM 19 /* IRQ6 */ | ||
| 249 | #define IRQ5_IRQ_NUM 20 /* IRQ5 */ | ||
| 250 | #define SPI1_IRQ_NUM 21 /* SPI 1 interrupt */ | ||
| 251 | #define SAM_IRQ_NUM 22 /* Sampling Timer for RTC */ | ||
| 252 | #define EMIQ_IRQ_NUM 23 /* Emulator Interrupt */ | ||
| 253 | |||
| 254 | #define SPI_IRQ_NUM SPI2_IRQ_NUM | ||
| 255 | |||
| 256 | /* '328-compatible definitions */ | ||
| 257 | #define SPIM_IRQ_NUM SPI_IRQ_NUM | ||
| 258 | #define TMR1_IRQ_NUM TMR_IRQ_NUM | ||
| 259 | #define UART_IRQ_NUM UART1_IRQ_NUM | ||
| 260 | |||
| 261 | /* | ||
| 262 | * Here go the bitmasks themselves | ||
| 263 | */ | ||
| 264 | #define IMR_MSPI (1 << SPI_IRQ_NUM) /* Mask SPI interrupt */ | ||
| 265 | #define IMR_MTMR (1 << TMR_IRQ_NUM) /* Mask Timer interrupt */ | ||
| 266 | #define IMR_MUART (1 << UART_IRQ_NUM) /* Mask UART interrupt */ | ||
| 267 | #define IMR_MWDT (1 << WDT_IRQ_NUM) /* Mask Watchdog Timer interrupt */ | ||
| 268 | #define IMR_MRTC (1 << RTC_IRQ_NUM) /* Mask RTC interrupt */ | ||
| 269 | #define IMR_MKB (1 << KB_IRQ_NUM) /* Mask Keyboard Interrupt */ | ||
| 270 | #define IMR_MPWM (1 << PWM_IRQ_NUM) /* Mask Pulse-Width Modulator int. */ | ||
| 271 | #define IMR_MINT0 (1 << INT0_IRQ_NUM) /* Mask External INT0 */ | ||
| 272 | #define IMR_MINT1 (1 << INT1_IRQ_NUM) /* Mask External INT1 */ | ||
| 273 | #define IMR_MINT2 (1 << INT2_IRQ_NUM) /* Mask External INT2 */ | ||
| 274 | #define IMR_MINT3 (1 << INT3_IRQ_NUM) /* Mask External INT3 */ | ||
| 275 | #define IMR_MIRQ1 (1 << IRQ1_IRQ_NUM) /* Mask IRQ1 */ | ||
| 276 | #define IMR_MIRQ2 (1 << IRQ2_IRQ_NUM) /* Mask IRQ2 */ | ||
| 277 | #define IMR_MIRQ3 (1 << IRQ3_IRQ_NUM) /* Mask IRQ3 */ | ||
| 278 | #define IMR_MIRQ6 (1 << IRQ6_IRQ_NUM) /* Mask IRQ6 */ | ||
| 279 | #define IMR_MIRQ5 (1 << IRQ5_IRQ_NUM) /* Mask IRQ5 */ | ||
| 280 | #define IMR_MSAM (1 << SAM_IRQ_NUM) /* Mask Sampling Timer for RTC */ | ||
| 281 | #define IMR_MEMIQ (1 << EMIQ_IRQ_NUM) /* Mask Emulator Interrupt */ | ||
| 282 | |||
| 283 | /* '328-compatible definitions */ | ||
| 284 | #define IMR_MSPIM IMR_MSPI | ||
| 285 | #define IMR_MTMR1 IMR_MTMR | ||
| 286 | |||
| 287 | /* | ||
| 288 | * Interrupt Status Register | ||
| 289 | */ | ||
| 290 | #define ISR_ADDR 0xfffff30c | ||
| 291 | #define ISR LONG_REF(ISR_ADDR) | ||
| 292 | |||
| 293 | #define ISR_SPI (1 << SPI_IRQ_NUM) /* SPI interrupt */ | ||
| 294 | #define ISR_TMR (1 << TMR_IRQ_NUM) /* Timer interrupt */ | ||
| 295 | #define ISR_UART (1 << UART_IRQ_NUM) /* UART interrupt */ | ||
| 296 | #define ISR_WDT (1 << WDT_IRQ_NUM) /* Watchdog Timer interrupt */ | ||
| 297 | #define ISR_RTC (1 << RTC_IRQ_NUM) /* RTC interrupt */ | ||
| 298 | #define ISR_KB (1 << KB_IRQ_NUM) /* Keyboard Interrupt */ | ||
| 299 | #define ISR_PWM (1 << PWM_IRQ_NUM) /* Pulse-Width Modulator interrupt */ | ||
| 300 | #define ISR_INT0 (1 << INT0_IRQ_NUM) /* External INT0 */ | ||
| 301 | #define ISR_INT1 (1 << INT1_IRQ_NUM) /* External INT1 */ | ||
| 302 | #define ISR_INT2 (1 << INT2_IRQ_NUM) /* External INT2 */ | ||
| 303 | #define ISR_INT3 (1 << INT3_IRQ_NUM) /* External INT3 */ | ||
| 304 | #define ISR_IRQ1 (1 << IRQ1_IRQ_NUM) /* IRQ1 */ | ||
| 305 | #define ISR_IRQ2 (1 << IRQ2_IRQ_NUM) /* IRQ2 */ | ||
| 306 | #define ISR_IRQ3 (1 << IRQ3_IRQ_NUM) /* IRQ3 */ | ||
| 307 | #define ISR_IRQ6 (1 << IRQ6_IRQ_NUM) /* IRQ6 */ | ||
| 308 | #define ISR_IRQ5 (1 << IRQ5_IRQ_NUM) /* IRQ5 */ | ||
| 309 | #define ISR_SAM (1 << SAM_IRQ_NUM) /* Sampling Timer for RTC */ | ||
| 310 | #define ISR_EMIQ (1 << EMIQ_IRQ_NUM) /* Emulator Interrupt */ | ||
| 311 | |||
| 312 | /* '328-compatible definitions */ | ||
| 313 | #define ISR_SPIM ISR_SPI | ||
| 314 | #define ISR_TMR1 ISR_TMR | ||
| 315 | |||
| 316 | /* | ||
| 317 | * Interrupt Pending Register | ||
| 318 | */ | ||
| 319 | #define IPR_ADDR 0xfffff30c | ||
| 320 | #define IPR LONG_REF(IPR_ADDR) | ||
| 321 | |||
| 322 | #define IPR_SPI (1 << SPI_IRQ_NUM) /* SPI interrupt */ | ||
| 323 | #define IPR_TMR (1 << TMR_IRQ_NUM) /* Timer interrupt */ | ||
| 324 | #define IPR_UART (1 << UART_IRQ_NUM) /* UART interrupt */ | ||
| 325 | #define IPR_WDT (1 << WDT_IRQ_NUM) /* Watchdog Timer interrupt */ | ||
| 326 | #define IPR_RTC (1 << RTC_IRQ_NUM) /* RTC interrupt */ | ||
| 327 | #define IPR_KB (1 << KB_IRQ_NUM) /* Keyboard Interrupt */ | ||
| 328 | #define IPR_PWM (1 << PWM_IRQ_NUM) /* Pulse-Width Modulator interrupt */ | ||
| 329 | #define IPR_INT0 (1 << INT0_IRQ_NUM) /* External INT0 */ | ||
| 330 | #define IPR_INT1 (1 << INT1_IRQ_NUM) /* External INT1 */ | ||
| 331 | #define IPR_INT2 (1 << INT2_IRQ_NUM) /* External INT2 */ | ||
| 332 | #define IPR_INT3 (1 << INT3_IRQ_NUM) /* External INT3 */ | ||
| 333 | #define IPR_IRQ1 (1 << IRQ1_IRQ_NUM) /* IRQ1 */ | ||
| 334 | #define IPR_IRQ2 (1 << IRQ2_IRQ_NUM) /* IRQ2 */ | ||
| 335 | #define IPR_IRQ3 (1 << IRQ3_IRQ_NUM) /* IRQ3 */ | ||
| 336 | #define IPR_IRQ6 (1 << IRQ6_IRQ_NUM) /* IRQ6 */ | ||
| 337 | #define IPR_IRQ5 (1 << IRQ5_IRQ_NUM) /* IRQ5 */ | ||
| 338 | #define IPR_SAM (1 << SAM_IRQ_NUM) /* Sampling Timer for RTC */ | ||
| 339 | #define IPR_EMIQ (1 << EMIQ_IRQ_NUM) /* Emulator Interrupt */ | ||
| 340 | |||
| 341 | /* '328-compatible definitions */ | ||
| 342 | #define IPR_SPIM IPR_SPI | ||
| 343 | #define IPR_TMR1 IPR_TMR | ||
| 344 | |||
| 345 | /********** | ||
| 346 | * | ||
| 347 | * 0xFFFFF4xx -- Parallel Ports | ||
| 348 | * | ||
| 349 | **********/ | ||
| 350 | |||
| 351 | /* | ||
| 352 | * Port A | ||
| 353 | */ | ||
| 354 | #define PADIR_ADDR 0xfffff400 /* Port A direction reg */ | ||
| 355 | #define PADATA_ADDR 0xfffff401 /* Port A data register */ | ||
| 356 | #define PAPUEN_ADDR 0xfffff402 /* Port A Pull-Up enable reg */ | ||
| 357 | |||
| 358 | #define PADIR BYTE_REF(PADIR_ADDR) | ||
| 359 | #define PADATA BYTE_REF(PADATA_ADDR) | ||
| 360 | #define PAPUEN BYTE_REF(PAPUEN_ADDR) | ||
| 361 | |||
| 362 | #define PA(x) (1 << (x)) | ||
| 363 | |||
| 364 | /* | ||
| 365 | * Port B | ||
| 366 | */ | ||
| 367 | #define PBDIR_ADDR 0xfffff408 /* Port B direction reg */ | ||
| 368 | #define PBDATA_ADDR 0xfffff409 /* Port B data register */ | ||
| 369 | #define PBPUEN_ADDR 0xfffff40a /* Port B Pull-Up enable reg */ | ||
| 370 | #define PBSEL_ADDR 0xfffff40b /* Port B Select Register */ | ||
| 371 | |||
| 372 | #define PBDIR BYTE_REF(PBDIR_ADDR) | ||
| 373 | #define PBDATA BYTE_REF(PBDATA_ADDR) | ||
| 374 | #define PBPUEN BYTE_REF(PBPUEN_ADDR) | ||
| 375 | #define PBSEL BYTE_REF(PBSEL_ADDR) | ||
| 376 | |||
| 377 | #define PB(x) (1 << (x)) | ||
| 378 | |||
| 379 | #define PB_CSB0 0x01 /* Use CSB0 as PB[0] */ | ||
| 380 | #define PB_CSB1 0x02 /* Use CSB1 as PB[1] */ | ||
| 381 | #define PB_CSC0_RAS0 0x04 /* Use CSC0/RAS0 as PB[2] */ | ||
| 382 | #define PB_CSC1_RAS1 0x08 /* Use CSC1/RAS1 as PB[3] */ | ||
| 383 | #define PB_CSD0_CAS0 0x10 /* Use CSD0/CAS0 as PB[4] */ | ||
| 384 | #define PB_CSD1_CAS1 0x20 /* Use CSD1/CAS1 as PB[5] */ | ||
| 385 | #define PB_TIN_TOUT 0x40 /* Use TIN/TOUT as PB[6] */ | ||
| 386 | #define PB_PWMO 0x80 /* Use PWMO as PB[7] */ | ||
| 387 | |||
| 388 | /* | ||
| 389 | * Port C | ||
| 390 | */ | ||
| 391 | #define PCDIR_ADDR 0xfffff410 /* Port C direction reg */ | ||
| 392 | #define PCDATA_ADDR 0xfffff411 /* Port C data register */ | ||
| 393 | #define PCPDEN_ADDR 0xfffff412 /* Port C Pull-Down enb. reg */ | ||
| 394 | #define PCSEL_ADDR 0xfffff413 /* Port C Select Register */ | ||
| 395 | |||
| 396 | #define PCDIR BYTE_REF(PCDIR_ADDR) | ||
| 397 | #define PCDATA BYTE_REF(PCDATA_ADDR) | ||
| 398 | #define PCPDEN BYTE_REF(PCPDEN_ADDR) | ||
| 399 | #define PCSEL BYTE_REF(PCSEL_ADDR) | ||
| 400 | |||
| 401 | #define PC(x) (1 << (x)) | ||
| 402 | |||
| 403 | #define PC_LD0 0x01 /* Use LD0 as PC[0] */ | ||
| 404 | #define PC_LD1 0x02 /* Use LD1 as PC[1] */ | ||
| 405 | #define PC_LD2 0x04 /* Use LD2 as PC[2] */ | ||
| 406 | #define PC_LD3 0x08 /* Use LD3 as PC[3] */ | ||
| 407 | #define PC_LFLM 0x10 /* Use LFLM as PC[4] */ | ||
| 408 | #define PC_LLP 0x20 /* Use LLP as PC[5] */ | ||
| 409 | #define PC_LCLK 0x40 /* Use LCLK as PC[6] */ | ||
| 410 | #define PC_LACD 0x80 /* Use LACD as PC[7] */ | ||
| 411 | |||
| 412 | /* | ||
| 413 | * Port D | ||
| 414 | */ | ||
| 415 | #define PDDIR_ADDR 0xfffff418 /* Port D direction reg */ | ||
| 416 | #define PDDATA_ADDR 0xfffff419 /* Port D data register */ | ||
| 417 | #define PDPUEN_ADDR 0xfffff41a /* Port D Pull-Up enable reg */ | ||
| 418 | #define PDSEL_ADDR 0xfffff41b /* Port D Select Register */ | ||
| 419 | #define PDPOL_ADDR 0xfffff41c /* Port D Polarity Register */ | ||
| 420 | #define PDIRQEN_ADDR 0xfffff41d /* Port D IRQ enable register */ | ||
| 421 | #define PDKBEN_ADDR 0xfffff41e /* Port D Keyboard Enable reg */ | ||
| 422 | #define PDIQEG_ADDR 0xfffff41f /* Port D IRQ Edge Register */ | ||
| 423 | |||
| 424 | #define PDDIR BYTE_REF(PDDIR_ADDR) | ||
| 425 | #define PDDATA BYTE_REF(PDDATA_ADDR) | ||
| 426 | #define PDPUEN BYTE_REF(PDPUEN_ADDR) | ||
| 427 | #define PDSEL BYTE_REF(PDSEL_ADDR) | ||
| 428 | #define PDPOL BYTE_REF(PDPOL_ADDR) | ||
| 429 | #define PDIRQEN BYTE_REF(PDIRQEN_ADDR) | ||
| 430 | #define PDKBEN BYTE_REF(PDKBEN_ADDR) | ||
| 431 | #define PDIQEG BYTE_REF(PDIQEG_ADDR) | ||
| 432 | |||
| 433 | #define PD(x) (1 << (x)) | ||
| 434 | |||
| 435 | #define PD_INT0 0x01 /* Use INT0 as PD[0] */ | ||
| 436 | #define PD_INT1 0x02 /* Use INT1 as PD[1] */ | ||
| 437 | #define PD_INT2 0x04 /* Use INT2 as PD[2] */ | ||
| 438 | #define PD_INT3 0x08 /* Use INT3 as PD[3] */ | ||
| 439 | #define PD_IRQ1 0x10 /* Use IRQ1 as PD[4] */ | ||
| 440 | #define PD_IRQ2 0x20 /* Use IRQ2 as PD[5] */ | ||
| 441 | #define PD_IRQ3 0x40 /* Use IRQ3 as PD[6] */ | ||
| 442 | #define PD_IRQ6 0x80 /* Use IRQ6 as PD[7] */ | ||
| 443 | |||
| 444 | /* | ||
| 445 | * Port E | ||
| 446 | */ | ||
| 447 | #define PEDIR_ADDR 0xfffff420 /* Port E direction reg */ | ||
| 448 | #define PEDATA_ADDR 0xfffff421 /* Port E data register */ | ||
| 449 | #define PEPUEN_ADDR 0xfffff422 /* Port E Pull-Up enable reg */ | ||
| 450 | #define PESEL_ADDR 0xfffff423 /* Port E Select Register */ | ||
| 451 | |||
| 452 | #define PEDIR BYTE_REF(PEDIR_ADDR) | ||
| 453 | #define PEDATA BYTE_REF(PEDATA_ADDR) | ||
| 454 | #define PEPUEN BYTE_REF(PEPUEN_ADDR) | ||
| 455 | #define PESEL BYTE_REF(PESEL_ADDR) | ||
| 456 | |||
| 457 | #define PE(x) (1 << (x)) | ||
| 458 | |||
| 459 | #define PE_SPMTXD 0x01 /* Use SPMTXD as PE[0] */ | ||
| 460 | #define PE_SPMRXD 0x02 /* Use SPMRXD as PE[1] */ | ||
| 461 | #define PE_SPMCLK 0x04 /* Use SPMCLK as PE[2] */ | ||
| 462 | #define PE_DWE 0x08 /* Use DWE as PE[3] */ | ||
| 463 | #define PE_RXD 0x10 /* Use RXD as PE[4] */ | ||
| 464 | #define PE_TXD 0x20 /* Use TXD as PE[5] */ | ||
| 465 | #define PE_RTS 0x40 /* Use RTS as PE[6] */ | ||
| 466 | #define PE_CTS 0x80 /* Use CTS as PE[7] */ | ||
| 467 | |||
| 468 | /* | ||
| 469 | * Port F | ||
| 470 | */ | ||
| 471 | #define PFDIR_ADDR 0xfffff428 /* Port F direction reg */ | ||
| 472 | #define PFDATA_ADDR 0xfffff429 /* Port F data register */ | ||
| 473 | #define PFPUEN_ADDR 0xfffff42a /* Port F Pull-Up enable reg */ | ||
| 474 | #define PFSEL_ADDR 0xfffff42b /* Port F Select Register */ | ||
| 475 | |||
| 476 | #define PFDIR BYTE_REF(PFDIR_ADDR) | ||
| 477 | #define PFDATA BYTE_REF(PFDATA_ADDR) | ||
| 478 | #define PFPUEN BYTE_REF(PFPUEN_ADDR) | ||
| 479 | #define PFSEL BYTE_REF(PFSEL_ADDR) | ||
| 480 | |||
| 481 | #define PF(x) (1 << (x)) | ||
| 482 | |||
| 483 | #define PF_LCONTRAST 0x01 /* Use LCONTRAST as PF[0] */ | ||
| 484 | #define PF_IRQ5 0x02 /* Use IRQ5 as PF[1] */ | ||
| 485 | #define PF_CLKO 0x04 /* Use CLKO as PF[2] */ | ||
| 486 | #define PF_A20 0x08 /* Use A20 as PF[3] */ | ||
| 487 | #define PF_A21 0x10 /* Use A21 as PF[4] */ | ||
| 488 | #define PF_A22 0x20 /* Use A22 as PF[5] */ | ||
| 489 | #define PF_A23 0x40 /* Use A23 as PF[6] */ | ||
| 490 | #define PF_CSA1 0x80 /* Use CSA1 as PF[7] */ | ||
| 491 | |||
| 492 | /* | ||
| 493 | * Port G | ||
| 494 | */ | ||
| 495 | #define PGDIR_ADDR 0xfffff430 /* Port G direction reg */ | ||
| 496 | #define PGDATA_ADDR 0xfffff431 /* Port G data register */ | ||
| 497 | #define PGPUEN_ADDR 0xfffff432 /* Port G Pull-Up enable reg */ | ||
| 498 | #define PGSEL_ADDR 0xfffff433 /* Port G Select Register */ | ||
| 499 | |||
| 500 | #define PGDIR BYTE_REF(PGDIR_ADDR) | ||
| 501 | #define PGDATA BYTE_REF(PGDATA_ADDR) | ||
| 502 | #define PGPUEN BYTE_REF(PGPUEN_ADDR) | ||
| 503 | #define PGSEL BYTE_REF(PGSEL_ADDR) | ||
| 504 | |||
| 505 | #define PG(x) (1 << (x)) | ||
| 506 | |||
| 507 | #define PG_BUSW_DTACK 0x01 /* Use BUSW/DTACK as PG[0] */ | ||
| 508 | #define PG_A0 0x02 /* Use A0 as PG[1] */ | ||
| 509 | #define PG_EMUIRQ 0x04 /* Use EMUIRQ as PG[2] */ | ||
| 510 | #define PG_HIZ_P_D 0x08 /* Use HIZ/P/D as PG[3] */ | ||
| 511 | #define PG_EMUCS 0x10 /* Use EMUCS as PG[4] */ | ||
| 512 | #define PG_EMUBRK 0x20 /* Use EMUBRK as PG[5] */ | ||
| 513 | |||
| 514 | /* | ||
| 515 | * Port J | ||
| 516 | */ | ||
| 517 | #define PJDIR_ADDR 0xfffff438 /* Port J direction reg */ | ||
| 518 | #define PJDATA_ADDR 0xfffff439 /* Port J data register */ | ||
| 519 | #define PJPUEN_ADDR 0xfffff43A /* Port J Pull-Up enb. reg */ | ||
| 520 | #define PJSEL_ADDR 0xfffff43B /* Port J Select Register */ | ||
| 521 | |||
| 522 | #define PJDIR BYTE_REF(PJDIR_ADDR) | ||
| 523 | #define PJDATA BYTE_REF(PJDATA_ADDR) | ||
| 524 | #define PJPUEN BYTE_REF(PJPUEN_ADDR) | ||
| 525 | #define PJSEL BYTE_REF(PJSEL_ADDR) | ||
| 526 | |||
| 527 | #define PJ(x) (1 << (x)) | ||
| 528 | |||
| 529 | /* | ||
| 530 | * Port K | ||
| 531 | */ | ||
| 532 | #define PKDIR_ADDR 0xfffff440 /* Port K direction reg */ | ||
| 533 | #define PKDATA_ADDR 0xfffff441 /* Port K data register */ | ||
| 534 | #define PKPUEN_ADDR 0xfffff442 /* Port K Pull-Up enb. reg */ | ||
| 535 | #define PKSEL_ADDR 0xfffff443 /* Port K Select Register */ | ||
| 536 | |||
| 537 | #define PKDIR BYTE_REF(PKDIR_ADDR) | ||
| 538 | #define PKDATA BYTE_REF(PKDATA_ADDR) | ||
| 539 | #define PKPUEN BYTE_REF(PKPUEN_ADDR) | ||
| 540 | #define PKSEL BYTE_REF(PKSEL_ADDR) | ||
| 541 | |||
| 542 | #define PK(x) (1 << (x)) | ||
| 543 | |||
| 544 | #define PK_DATAREADY 0x01 /* Use ~DATA_READY as PK[0] */ | ||
| 545 | #define PK_PWM2 0x01 /* Use PWM2 as PK[0] */ | ||
| 546 | #define PK_R_W 0x02 /* Use R/W as PK[1] */ | ||
| 547 | #define PK_LDS 0x04 /* Use /LDS as PK[2] */ | ||
| 548 | #define PK_UDS 0x08 /* Use /UDS as PK[3] */ | ||
| 549 | #define PK_LD4 0x10 /* Use LD4 as PK[4] */ | ||
| 550 | #define PK_LD5 0x20 /* Use LD5 as PK[5] */ | ||
| 551 | #define PK_LD6 0x40 /* Use LD6 as PK[6] */ | ||
| 552 | #define PK_LD7 0x80 /* Use LD7 as PK[7] */ | ||
| 553 | |||
| 554 | #define PJDIR_ADDR 0xfffff438 /* Port J direction reg */ | ||
| 555 | #define PJDATA_ADDR 0xfffff439 /* Port J data register */ | ||
| 556 | #define PJPUEN_ADDR 0xfffff43A /* Port J Pull-Up enable reg */ | ||
| 557 | #define PJSEL_ADDR 0xfffff43B /* Port J Select Register */ | ||
| 558 | |||
| 559 | #define PJDIR BYTE_REF(PJDIR_ADDR) | ||
| 560 | #define PJDATA BYTE_REF(PJDATA_ADDR) | ||
| 561 | #define PJPUEN BYTE_REF(PJPUEN_ADDR) | ||
| 562 | #define PJSEL BYTE_REF(PJSEL_ADDR) | ||
| 563 | |||
| 564 | #define PJ(x) (1 << (x)) | ||
| 565 | |||
| 566 | #define PJ_MOSI 0x01 /* Use MOSI as PJ[0] */ | ||
| 567 | #define PJ_MISO 0x02 /* Use MISO as PJ[1] */ | ||
| 568 | #define PJ_SPICLK1 0x04 /* Use SPICLK1 as PJ[2] */ | ||
| 569 | #define PJ_SS 0x08 /* Use SS as PJ[3] */ | ||
| 570 | #define PJ_RXD2 0x10 /* Use RXD2 as PJ[4] */ | ||
| 571 | #define PJ_TXD2 0x20 /* Use TXD2 as PJ[5] */ | ||
| 572 | #define PJ_RTS2 0x40 /* Use RTS2 as PJ[5] */ | ||
| 573 | #define PJ_CTS2 0x80 /* Use CTS2 as PJ[5] */ | ||
| 574 | |||
| 575 | /* | ||
| 576 | * Port M | ||
| 577 | */ | ||
| 578 | #define PMDIR_ADDR 0xfffff448 /* Port M direction reg */ | ||
| 579 | #define PMDATA_ADDR 0xfffff449 /* Port M data register */ | ||
| 580 | #define PMPUEN_ADDR 0xfffff44a /* Port M Pull-Up enable reg */ | ||
| 581 | #define PMSEL_ADDR 0xfffff44b /* Port M Select Register */ | ||
| 582 | |||
| 583 | #define PMDIR BYTE_REF(PMDIR_ADDR) | ||
| 584 | #define PMDATA BYTE_REF(PMDATA_ADDR) | ||
| 585 | #define PMPUEN BYTE_REF(PMPUEN_ADDR) | ||
| 586 | #define PMSEL BYTE_REF(PMSEL_ADDR) | ||
| 587 | |||
| 588 | #define PM(x) (1 << (x)) | ||
| 589 | |||
| 590 | #define PM_SDCLK 0x01 /* Use SDCLK as PM[0] */ | ||
| 591 | #define PM_SDCE 0x02 /* Use SDCE as PM[1] */ | ||
| 592 | #define PM_DQMH 0x04 /* Use DQMH as PM[2] */ | ||
| 593 | #define PM_DQML 0x08 /* Use DQML as PM[3] */ | ||
| 594 | #define PM_SDA10 0x10 /* Use SDA10 as PM[4] */ | ||
| 595 | #define PM_DMOE 0x20 /* Use DMOE as PM[5] */ | ||
| 596 | |||
| 597 | /********** | ||
| 598 | * | ||
| 599 | * 0xFFFFF5xx -- Pulse-Width Modulator (PWM) | ||
| 600 | * | ||
| 601 | **********/ | ||
| 602 | |||
| 603 | /* | ||
| 604 | * PWM Control Register | ||
| 605 | */ | ||
| 606 | #define PWMC_ADDR 0xfffff500 | ||
| 607 | #define PWMC WORD_REF(PWMC_ADDR) | ||
| 608 | |||
| 609 | #define PWMC_CLKSEL_MASK 0x0003 /* Clock Selection */ | ||
| 610 | #define PWMC_CLKSEL_SHIFT 0 | ||
| 611 | #define PWMC_REPEAT_MASK 0x000c /* Sample Repeats */ | ||
| 612 | #define PWMC_REPEAT_SHIFT 2 | ||
| 613 | #define PWMC_EN 0x0010 /* Enable PWM */ | ||
| 614 | #define PMNC_FIFOAV 0x0020 /* FIFO Available */ | ||
| 615 | #define PWMC_IRQEN 0x0040 /* Interrupt Request Enable */ | ||
| 616 | #define PWMC_IRQ 0x0080 /* Interrupt Request (FIFO empty) */ | ||
| 617 | #define PWMC_PRESCALER_MASK 0x7f00 /* Incoming Clock prescaler */ | ||
| 618 | #define PWMC_PRESCALER_SHIFT 8 | ||
| 619 | #define PWMC_CLKSRC 0x8000 /* Clock Source Select */ | ||
| 620 | |||
| 621 | /* '328-compatible definitions */ | ||
| 622 | #define PWMC_PWMEN PWMC_EN | ||
| 623 | |||
| 624 | /* | ||
| 625 | * PWM Sample Register | ||
| 626 | */ | ||
| 627 | #define PWMS_ADDR 0xfffff502 | ||
| 628 | #define PWMS WORD_REF(PWMS_ADDR) | ||
| 629 | |||
| 630 | /* | ||
| 631 | * PWM Period Register | ||
| 632 | */ | ||
| 633 | #define PWMP_ADDR 0xfffff504 | ||
| 634 | #define PWMP BYTE_REF(PWMP_ADDR) | ||
| 635 | |||
| 636 | /* | ||
| 637 | * PWM Counter Register | ||
| 638 | */ | ||
| 639 | #define PWMCNT_ADDR 0xfffff505 | ||
| 640 | #define PWMCNT BYTE_REF(PWMCNT_ADDR) | ||
| 641 | |||
| 642 | /********** | ||
| 643 | * | ||
| 644 | * 0xFFFFF6xx -- General-Purpose Timer | ||
| 645 | * | ||
| 646 | **********/ | ||
| 647 | |||
| 648 | /* | ||
| 649 | * Timer Control register | ||
| 650 | */ | ||
| 651 | #define TCTL_ADDR 0xfffff600 | ||
| 652 | #define TCTL WORD_REF(TCTL_ADDR) | ||
| 653 | |||
| 654 | #define TCTL_TEN 0x0001 /* Timer Enable */ | ||
| 655 | #define TCTL_CLKSOURCE_MASK 0x000e /* Clock Source: */ | ||
| 656 | #define TCTL_CLKSOURCE_STOP 0x0000 /* Stop count (disabled) */ | ||
| 657 | #define TCTL_CLKSOURCE_SYSCLK 0x0002 /* SYSCLK to prescaler */ | ||
| 658 | #define TCTL_CLKSOURCE_SYSCLK_16 0x0004 /* SYSCLK/16 to prescaler */ | ||
| 659 | #define TCTL_CLKSOURCE_TIN 0x0006 /* TIN to prescaler */ | ||
| 660 | #define TCTL_CLKSOURCE_32KHZ 0x0008 /* 32kHz clock to prescaler */ | ||
| 661 | #define TCTL_IRQEN 0x0010 /* IRQ Enable */ | ||
| 662 | #define TCTL_OM 0x0020 /* Output Mode */ | ||
| 663 | #define TCTL_CAP_MASK 0x00c0 /* Capture Edge: */ | ||
| 664 | #define TCTL_CAP_RE 0x0040 /* Capture on rizing edge */ | ||
| 665 | #define TCTL_CAP_FE 0x0080 /* Capture on falling edge */ | ||
| 666 | #define TCTL_FRR 0x0010 /* Free-Run Mode */ | ||
| 667 | |||
| 668 | /* '328-compatible definitions */ | ||
| 669 | #define TCTL1_ADDR TCTL_ADDR | ||
| 670 | #define TCTL1 TCTL | ||
| 671 | |||
| 672 | /* | ||
| 673 | * Timer Prescaler Register | ||
| 674 | */ | ||
| 675 | #define TPRER_ADDR 0xfffff602 | ||
| 676 | #define TPRER WORD_REF(TPRER_ADDR) | ||
| 677 | |||
| 678 | /* '328-compatible definitions */ | ||
| 679 | #define TPRER1_ADDR TPRER_ADDR | ||
| 680 | #define TPRER1 TPRER | ||
| 681 | |||
| 682 | /* | ||
| 683 | * Timer Compare Register | ||
| 684 | */ | ||
| 685 | #define TCMP_ADDR 0xfffff604 | ||
| 686 | #define TCMP WORD_REF(TCMP_ADDR) | ||
| 687 | |||
| 688 | /* '328-compatible definitions */ | ||
| 689 | #define TCMP1_ADDR TCMP_ADDR | ||
| 690 | #define TCMP1 TCMP | ||
| 691 | |||
| 692 | /* | ||
| 693 | * Timer Capture register | ||
| 694 | */ | ||
| 695 | #define TCR_ADDR 0xfffff606 | ||
| 696 | #define TCR WORD_REF(TCR_ADDR) | ||
| 697 | |||
| 698 | /* '328-compatible definitions */ | ||
| 699 | #define TCR1_ADDR TCR_ADDR | ||
| 700 | #define TCR1 TCR | ||
| 701 | |||
| 702 | /* | ||
| 703 | * Timer Counter Register | ||
| 704 | */ | ||
| 705 | #define TCN_ADDR 0xfffff608 | ||
| 706 | #define TCN WORD_REF(TCN_ADDR) | ||
| 707 | |||
| 708 | /* '328-compatible definitions */ | ||
| 709 | #define TCN1_ADDR TCN_ADDR | ||
| 710 | #define TCN1 TCN | ||
| 711 | |||
| 712 | /* | ||
| 713 | * Timer Status Register | ||
| 714 | */ | ||
| 715 | #define TSTAT_ADDR 0xfffff60a | ||
| 716 | #define TSTAT WORD_REF(TSTAT_ADDR) | ||
| 717 | |||
| 718 | #define TSTAT_COMP 0x0001 /* Compare Event occurred */ | ||
| 719 | #define TSTAT_CAPT 0x0001 /* Capture Event occurred */ | ||
| 720 | |||
| 721 | /* '328-compatible definitions */ | ||
| 722 | #define TSTAT1_ADDR TSTAT_ADDR | ||
| 723 | #define TSTAT1 TSTAT | ||
| 724 | |||
| 725 | /********** | ||
| 726 | * | ||
| 727 | * 0xFFFFF8xx -- Serial Periferial Interface Master (SPIM) | ||
| 728 | * | ||
| 729 | **********/ | ||
| 730 | |||
| 731 | /* | ||
| 732 | * SPIM Data Register | ||
| 733 | */ | ||
| 734 | #define SPIMDATA_ADDR 0xfffff800 | ||
| 735 | #define SPIMDATA WORD_REF(SPIMDATA_ADDR) | ||
| 736 | |||
| 737 | /* | ||
| 738 | * SPIM Control/Status Register | ||
| 739 | */ | ||
| 740 | #define SPIMCONT_ADDR 0xfffff802 | ||
| 741 | #define SPIMCONT WORD_REF(SPIMCONT_ADDR) | ||
| 742 | |||
| 743 | #define SPIMCONT_BIT_COUNT_MASK 0x000f /* Transfer Length in Bytes */ | ||
| 744 | #define SPIMCONT_BIT_COUNT_SHIFT 0 | ||
| 745 | #define SPIMCONT_POL 0x0010 /* SPMCLK Signel Polarity */ | ||
| 746 | #define SPIMCONT_PHA 0x0020 /* Clock/Data phase relationship */ | ||
| 747 | #define SPIMCONT_IRQEN 0x0040 /* IRQ Enable */ | ||
| 748 | #define SPIMCONT_IRQ 0x0080 /* Interrupt Request */ | ||
| 749 | #define SPIMCONT_XCH 0x0100 /* Exchange */ | ||
| 750 | #define SPIMCONT_ENABLE 0x0200 /* Enable SPIM */ | ||
| 751 | #define SPIMCONT_DATA_RATE_MASK 0xe000 /* SPIM Data Rate */ | ||
| 752 | #define SPIMCONT_DATA_RATE_SHIFT 13 | ||
| 753 | |||
| 754 | /* '328-compatible definitions */ | ||
| 755 | #define SPIMCONT_SPIMIRQ SPIMCONT_IRQ | ||
| 756 | #define SPIMCONT_SPIMEN SPIMCONT_ENABLE | ||
| 757 | |||
| 758 | /********** | ||
| 759 | * | ||
| 760 | * 0xFFFFF9xx -- UART | ||
| 761 | * | ||
| 762 | **********/ | ||
| 763 | |||
| 764 | /* | ||
| 765 | * UART Status/Control Register | ||
| 766 | */ | ||
| 767 | |||
| 768 | #define USTCNT_ADDR 0xfffff900 | ||
| 769 | #define USTCNT WORD_REF(USTCNT_ADDR) | ||
| 770 | |||
| 771 | #define USTCNT_TXAE 0x0001 /* Transmitter Available Interrupt Enable */ | ||
| 772 | #define USTCNT_TXHE 0x0002 /* Transmitter Half Empty Enable */ | ||
| 773 | #define USTCNT_TXEE 0x0004 /* Transmitter Empty Interrupt Enable */ | ||
| 774 | #define USTCNT_RXRE 0x0008 /* Receiver Ready Interrupt Enable */ | ||
| 775 | #define USTCNT_RXHE 0x0010 /* Receiver Half-Full Interrupt Enable */ | ||
| 776 | #define USTCNT_RXFE 0x0020 /* Receiver Full Interrupt Enable */ | ||
| 777 | #define USTCNT_CTSD 0x0040 /* CTS Delta Interrupt Enable */ | ||
| 778 | #define USTCNT_ODEN 0x0080 /* Old Data Interrupt Enable */ | ||
| 779 | #define USTCNT_8_7 0x0100 /* Eight or seven-bit transmission */ | ||
| 780 | #define USTCNT_STOP 0x0200 /* Stop bit transmission */ | ||
| 781 | #define USTCNT_ODD 0x0400 /* Odd Parity */ | ||
| 782 | #define USTCNT_PEN 0x0800 /* Parity Enable */ | ||
| 783 | #define USTCNT_CLKM 0x1000 /* Clock Mode Select */ | ||
| 784 | #define USTCNT_TXEN 0x2000 /* Transmitter Enable */ | ||
| 785 | #define USTCNT_RXEN 0x4000 /* Receiver Enable */ | ||
| 786 | #define USTCNT_UEN 0x8000 /* UART Enable */ | ||
| 787 | |||
| 788 | /* '328-compatible definitions */ | ||
| 789 | #define USTCNT_TXAVAILEN USTCNT_TXAE | ||
| 790 | #define USTCNT_TXHALFEN USTCNT_TXHE | ||
| 791 | #define USTCNT_TXEMPTYEN USTCNT_TXEE | ||
| 792 | #define USTCNT_RXREADYEN USTCNT_RXRE | ||
| 793 | #define USTCNT_RXHALFEN USTCNT_RXHE | ||
| 794 | #define USTCNT_RXFULLEN USTCNT_RXFE | ||
| 795 | #define USTCNT_CTSDELTAEN USTCNT_CTSD | ||
| 796 | #define USTCNT_ODD_EVEN USTCNT_ODD | ||
| 797 | #define USTCNT_PARITYEN USTCNT_PEN | ||
| 798 | #define USTCNT_CLKMODE USTCNT_CLKM | ||
| 799 | #define USTCNT_UARTEN USTCNT_UEN | ||
| 800 | |||
| 801 | /* | ||
| 802 | * UART Baud Control Register | ||
| 803 | */ | ||
| 804 | #define UBAUD_ADDR 0xfffff902 | ||
| 805 | #define UBAUD WORD_REF(UBAUD_ADDR) | ||
| 806 | |||
| 807 | #define UBAUD_PRESCALER_MASK 0x003f /* Actual divisor is 65 - PRESCALER */ | ||
| 808 | #define UBAUD_PRESCALER_SHIFT 0 | ||
| 809 | #define UBAUD_DIVIDE_MASK 0x0700 /* Baud Rate freq. divizor */ | ||
| 810 | #define UBAUD_DIVIDE_SHIFT 8 | ||
| 811 | #define UBAUD_BAUD_SRC 0x0800 /* Baud Rate Source */ | ||
| 812 | #define UBAUD_UCLKDIR 0x2000 /* UCLK Direction */ | ||
| 813 | |||
| 814 | /* | ||
| 815 | * UART Receiver Register | ||
| 816 | */ | ||
| 817 | #define URX_ADDR 0xfffff904 | ||
| 818 | #define URX WORD_REF(URX_ADDR) | ||
| 819 | |||
| 820 | #define URX_RXDATA_ADDR 0xfffff905 | ||
| 821 | #define URX_RXDATA BYTE_REF(URX_RXDATA_ADDR) | ||
| 822 | |||
| 823 | #define URX_RXDATA_MASK 0x00ff /* Received data */ | ||
| 824 | #define URX_RXDATA_SHIFT 0 | ||
| 825 | #define URX_PARITY_ERROR 0x0100 /* Parity Error */ | ||
| 826 | #define URX_BREAK 0x0200 /* Break Detected */ | ||
| 827 | #define URX_FRAME_ERROR 0x0400 /* Framing Error */ | ||
| 828 | #define URX_OVRUN 0x0800 /* Serial Overrun */ | ||
| 829 | #define URX_OLD_DATA 0x1000 /* Old data in FIFO */ | ||
| 830 | #define URX_DATA_READY 0x2000 /* Data Ready (FIFO not empty) */ | ||
| 831 | #define URX_FIFO_HALF 0x4000 /* FIFO is Half-Full */ | ||
| 832 | #define URX_FIFO_FULL 0x8000 /* FIFO is Full */ | ||
| 833 | |||
| 834 | /* | ||
| 835 | * UART Transmitter Register | ||
| 836 | */ | ||
| 837 | #define UTX_ADDR 0xfffff906 | ||
| 838 | #define UTX WORD_REF(UTX_ADDR) | ||
| 839 | |||
| 840 | #define UTX_TXDATA_ADDR 0xfffff907 | ||
| 841 | #define UTX_TXDATA BYTE_REF(UTX_TXDATA_ADDR) | ||
| 842 | |||
| 843 | #define UTX_TXDATA_MASK 0x00ff /* Data to be transmitted */ | ||
| 844 | #define UTX_TXDATA_SHIFT 0 | ||
| 845 | #define UTX_CTS_DELTA 0x0100 /* CTS changed */ | ||
| 846 | #define UTX_CTS_STAT 0x0200 /* CTS State */ | ||
| 847 | #define UTX_BUSY 0x0400 /* FIFO is busy, sending a character */ | ||
| 848 | #define UTX_NOCTS 0x0800 /* Ignore CTS */ | ||
| 849 | #define UTX_SEND_BREAK 0x1000 /* Send a BREAK */ | ||
| 850 | #define UTX_TX_AVAIL 0x2000 /* Transmit FIFO has a slot available */ | ||
| 851 | #define UTX_FIFO_HALF 0x4000 /* Transmit FIFO is half empty */ | ||
| 852 | #define UTX_FIFO_EMPTY 0x8000 /* Transmit FIFO is empty */ | ||
| 853 | |||
| 854 | /* '328-compatible definitions */ | ||
| 855 | #define UTX_CTS_STATUS UTX_CTS_STAT | ||
| 856 | #define UTX_IGNORE_CTS UTX_NOCTS | ||
| 857 | |||
| 858 | /* | ||
| 859 | * UART Miscellaneous Register | ||
| 860 | */ | ||
| 861 | #define UMISC_ADDR 0xfffff908 | ||
| 862 | #define UMISC WORD_REF(UMISC_ADDR) | ||
| 863 | |||
| 864 | #define UMISC_TX_POL 0x0004 /* Transmit Polarity */ | ||
| 865 | #define UMISC_RX_POL 0x0008 /* Receive Polarity */ | ||
| 866 | #define UMISC_IRDA_LOOP 0x0010 /* IrDA Loopback Enable */ | ||
| 867 | #define UMISC_IRDA_EN 0x0020 /* Infra-Red Enable */ | ||
| 868 | #define UMISC_RTS 0x0040 /* Set RTS status */ | ||
| 869 | #define UMISC_RTSCONT 0x0080 /* Choose RTS control */ | ||
| 870 | #define UMISC_IR_TEST 0x0400 /* IRDA Test Enable */ | ||
| 871 | #define UMISC_BAUD_RESET 0x0800 /* Reset Baud Rate Generation Counters */ | ||
| 872 | #define UMISC_LOOP 0x1000 /* Serial Loopback Enable */ | ||
| 873 | #define UMISC_FORCE_PERR 0x2000 /* Force Parity Error */ | ||
| 874 | #define UMISC_CLKSRC 0x4000 /* Clock Source */ | ||
| 875 | #define UMISC_BAUD_TEST 0x8000 /* Enable Baud Test Mode */ | ||
| 876 | |||
| 877 | /* | ||
| 878 | * UART Non-integer Prescaler Register | ||
| 879 | */ | ||
| 880 | #define NIPR_ADDR 0xfffff90a | ||
| 881 | #define NIPR WORD_REF(NIPR_ADDR) | ||
| 882 | |||
| 883 | #define NIPR_STEP_VALUE_MASK 0x00ff /* NI prescaler step value */ | ||
| 884 | #define NIPR_STEP_VALUE_SHIFT 0 | ||
| 885 | #define NIPR_SELECT_MASK 0x0700 /* Tap Selection */ | ||
| 886 | #define NIPR_SELECT_SHIFT 8 | ||
| 887 | #define NIPR_PRE_SEL 0x8000 /* Non-integer prescaler select */ | ||
| 888 | |||
| 889 | |||
| 890 | /* generalization of uart control registers to support multiple ports: */ | ||
| 891 | typedef struct { | ||
| 892 | volatile unsigned short int ustcnt; | ||
| 893 | volatile unsigned short int ubaud; | ||
| 894 | union { | ||
| 895 | volatile unsigned short int w; | ||
| 896 | struct { | ||
| 897 | volatile unsigned char status; | ||
| 898 | volatile unsigned char rxdata; | ||
| 899 | } b; | ||
| 900 | } urx; | ||
| 901 | union { | ||
| 902 | volatile unsigned short int w; | ||
| 903 | struct { | ||
| 904 | volatile unsigned char status; | ||
| 905 | volatile unsigned char txdata; | ||
| 906 | } b; | ||
| 907 | } utx; | ||
| 908 | volatile unsigned short int umisc; | ||
| 909 | volatile unsigned short int nipr; | ||
| 910 | volatile unsigned short int hmark; | ||
| 911 | volatile unsigned short int unused; | ||
| 912 | } __attribute__((packed)) m68328_uart; | ||
| 913 | |||
| 914 | |||
| 915 | |||
| 916 | |||
| 917 | /********** | ||
| 918 | * | ||
| 919 | * 0xFFFFFAxx -- LCD Controller | ||
| 920 | * | ||
| 921 | **********/ | ||
| 922 | |||
| 923 | /* | ||
| 924 | * LCD Screen Starting Address Register | ||
| 925 | */ | ||
| 926 | #define LSSA_ADDR 0xfffffa00 | ||
| 927 | #define LSSA LONG_REF(LSSA_ADDR) | ||
| 928 | |||
| 929 | #define LSSA_SSA_MASK 0x1ffffffe /* Bits 0 and 29-31 are reserved */ | ||
| 930 | |||
| 931 | /* | ||
| 932 | * LCD Virtual Page Width Register | ||
| 933 | */ | ||
| 934 | #define LVPW_ADDR 0xfffffa05 | ||
| 935 | #define LVPW BYTE_REF(LVPW_ADDR) | ||
| 936 | |||
| 937 | /* | ||
| 938 | * LCD Screen Width Register (not compatible with '328 !!!) | ||
| 939 | */ | ||
| 940 | #define LXMAX_ADDR 0xfffffa08 | ||
| 941 | #define LXMAX WORD_REF(LXMAX_ADDR) | ||
| 942 | |||
| 943 | #define LXMAX_XM_MASK 0x02f0 /* Bits 0-3 and 10-15 are reserved */ | ||
| 944 | |||
| 945 | /* | ||
| 946 | * LCD Screen Height Register | ||
| 947 | */ | ||
| 948 | #define LYMAX_ADDR 0xfffffa0a | ||
| 949 | #define LYMAX WORD_REF(LYMAX_ADDR) | ||
| 950 | |||
| 951 | #define LYMAX_YM_MASK 0x01ff /* Bits 9-15 are reserved */ | ||
| 952 | |||
| 953 | /* | ||
| 954 | * LCD Cursor X Position Register | ||
| 955 | */ | ||
| 956 | #define LCXP_ADDR 0xfffffa18 | ||
| 957 | #define LCXP WORD_REF(LCXP_ADDR) | ||
| 958 | |||
| 959 | #define LCXP_CC_MASK 0xc000 /* Cursor Control */ | ||
| 960 | #define LCXP_CC_TRAMSPARENT 0x0000 | ||
| 961 | #define LCXP_CC_BLACK 0x4000 | ||
| 962 | #define LCXP_CC_REVERSED 0x8000 | ||
| 963 | #define LCXP_CC_WHITE 0xc000 | ||
| 964 | #define LCXP_CXP_MASK 0x02ff /* Cursor X position */ | ||
| 965 | |||
| 966 | /* | ||
| 967 | * LCD Cursor Y Position Register | ||
| 968 | */ | ||
| 969 | #define LCYP_ADDR 0xfffffa1a | ||
| 970 | #define LCYP WORD_REF(LCYP_ADDR) | ||
| 971 | |||
| 972 | #define LCYP_CYP_MASK 0x01ff /* Cursor Y Position */ | ||
| 973 | |||
| 974 | /* | ||
| 975 | * LCD Cursor Width and Heigth Register | ||
| 976 | */ | ||
| 977 | #define LCWCH_ADDR 0xfffffa1c | ||
| 978 | #define LCWCH WORD_REF(LCWCH_ADDR) | ||
| 979 | |||
| 980 | #define LCWCH_CH_MASK 0x001f /* Cursor Height */ | ||
| 981 | #define LCWCH_CH_SHIFT 0 | ||
| 982 | #define LCWCH_CW_MASK 0x1f00 /* Cursor Width */ | ||
| 983 | #define LCWCH_CW_SHIFT 8 | ||
| 984 | |||
| 985 | /* | ||
| 986 | * LCD Blink Control Register | ||
| 987 | */ | ||
| 988 | #define LBLKC_ADDR 0xfffffa1f | ||
| 989 | #define LBLKC BYTE_REF(LBLKC_ADDR) | ||
| 990 | |||
| 991 | #define LBLKC_BD_MASK 0x7f /* Blink Divisor */ | ||
| 992 | #define LBLKC_BD_SHIFT 0 | ||
| 993 | #define LBLKC_BKEN 0x80 /* Blink Enabled */ | ||
| 994 | |||
| 995 | /* | ||
| 996 | * LCD Panel Interface Configuration Register | ||
| 997 | */ | ||
| 998 | #define LPICF_ADDR 0xfffffa20 | ||
| 999 | #define LPICF BYTE_REF(LPICF_ADDR) | ||
| 1000 | |||
| 1001 | #define LPICF_GS_MASK 0x03 /* Gray-Scale Mode */ | ||
| 1002 | #define LPICF_GS_BW 0x00 | ||
| 1003 | #define LPICF_GS_GRAY_4 0x01 | ||
| 1004 | #define LPICF_GS_GRAY_16 0x02 | ||
| 1005 | #define LPICF_PBSIZ_MASK 0x0c /* Panel Bus Width */ | ||
| 1006 | #define LPICF_PBSIZ_1 0x00 | ||
| 1007 | #define LPICF_PBSIZ_2 0x04 | ||
| 1008 | #define LPICF_PBSIZ_4 0x08 | ||
| 1009 | |||
| 1010 | /* | ||
| 1011 | * LCD Polarity Configuration Register | ||
| 1012 | */ | ||
| 1013 | #define LPOLCF_ADDR 0xfffffa21 | ||
| 1014 | #define LPOLCF BYTE_REF(LPOLCF_ADDR) | ||
| 1015 | |||
| 1016 | #define LPOLCF_PIXPOL 0x01 /* Pixel Polarity */ | ||
| 1017 | #define LPOLCF_LPPOL 0x02 /* Line Pulse Polarity */ | ||
| 1018 | #define LPOLCF_FLMPOL 0x04 /* Frame Marker Polarity */ | ||
| 1019 | #define LPOLCF_LCKPOL 0x08 /* LCD Shift Lock Polarity */ | ||
| 1020 | |||
| 1021 | /* | ||
| 1022 | * LACD (LCD Alternate Crystal Direction) Rate Control Register | ||
| 1023 | */ | ||
| 1024 | #define LACDRC_ADDR 0xfffffa23 | ||
| 1025 | #define LACDRC BYTE_REF(LACDRC_ADDR) | ||
| 1026 | |||
| 1027 | #define LACDRC_ACDSLT 0x80 /* Signal Source Select */ | ||
| 1028 | #define LACDRC_ACD_MASK 0x0f /* Alternate Crystal Direction Control */ | ||
| 1029 | #define LACDRC_ACD_SHIFT 0 | ||
| 1030 | |||
| 1031 | /* | ||
| 1032 | * LCD Pixel Clock Divider Register | ||
| 1033 | */ | ||
| 1034 | #define LPXCD_ADDR 0xfffffa25 | ||
| 1035 | #define LPXCD BYTE_REF(LPXCD_ADDR) | ||
| 1036 | |||
| 1037 | #define LPXCD_PCD_MASK 0x3f /* Pixel Clock Divider */ | ||
| 1038 | #define LPXCD_PCD_SHIFT 0 | ||
| 1039 | |||
| 1040 | /* | ||
| 1041 | * LCD Clocking Control Register | ||
| 1042 | */ | ||
| 1043 | #define LCKCON_ADDR 0xfffffa27 | ||
| 1044 | #define LCKCON BYTE_REF(LCKCON_ADDR) | ||
| 1045 | |||
| 1046 | #define LCKCON_DWS_MASK 0x0f /* Display Wait-State */ | ||
| 1047 | #define LCKCON_DWS_SHIFT 0 | ||
| 1048 | #define LCKCON_DWIDTH 0x40 /* Display Memory Width */ | ||
| 1049 | #define LCKCON_LCDON 0x80 /* Enable LCD Controller */ | ||
| 1050 | |||
| 1051 | /* '328-compatible definitions */ | ||
| 1052 | #define LCKCON_DW_MASK LCKCON_DWS_MASK | ||
| 1053 | #define LCKCON_DW_SHIFT LCKCON_DWS_SHIFT | ||
| 1054 | |||
| 1055 | /* | ||
| 1056 | * LCD Refresh Rate Adjustment Register | ||
| 1057 | */ | ||
| 1058 | #define LRRA_ADDR 0xfffffa29 | ||
| 1059 | #define LRRA BYTE_REF(LRRA_ADDR) | ||
| 1060 | |||
| 1061 | /* | ||
| 1062 | * LCD Panning Offset Register | ||
| 1063 | */ | ||
| 1064 | #define LPOSR_ADDR 0xfffffa2d | ||
| 1065 | #define LPOSR BYTE_REF(LPOSR_ADDR) | ||
| 1066 | |||
| 1067 | #define LPOSR_POS_MASK 0x0f /* Pixel Offset Code */ | ||
| 1068 | #define LPOSR_POS_SHIFT 0 | ||
| 1069 | |||
| 1070 | /* | ||
| 1071 | * LCD Frame Rate Control Modulation Register | ||
| 1072 | */ | ||
| 1073 | #define LFRCM_ADDR 0xfffffa31 | ||
| 1074 | #define LFRCM BYTE_REF(LFRCM_ADDR) | ||
| 1075 | |||
| 1076 | #define LFRCM_YMOD_MASK 0x0f /* Vertical Modulation */ | ||
| 1077 | #define LFRCM_YMOD_SHIFT 0 | ||
| 1078 | #define LFRCM_XMOD_MASK 0xf0 /* Horizontal Modulation */ | ||
| 1079 | #define LFRCM_XMOD_SHIFT 4 | ||
| 1080 | |||
| 1081 | /* | ||
| 1082 | * LCD Gray Palette Mapping Register | ||
| 1083 | */ | ||
| 1084 | #define LGPMR_ADDR 0xfffffa33 | ||
| 1085 | #define LGPMR BYTE_REF(LGPMR_ADDR) | ||
| 1086 | |||
| 1087 | #define LGPMR_G1_MASK 0x0f | ||
| 1088 | #define LGPMR_G1_SHIFT 0 | ||
| 1089 | #define LGPMR_G2_MASK 0xf0 | ||
| 1090 | #define LGPMR_G2_SHIFT 4 | ||
| 1091 | |||
| 1092 | /* | ||
| 1093 | * PWM Contrast Control Register | ||
| 1094 | */ | ||
| 1095 | #define PWMR_ADDR 0xfffffa36 | ||
| 1096 | #define PWMR WORD_REF(PWMR_ADDR) | ||
| 1097 | |||
| 1098 | #define PWMR_PW_MASK 0x00ff /* Pulse Width */ | ||
| 1099 | #define PWMR_PW_SHIFT 0 | ||
| 1100 | #define PWMR_CCPEN 0x0100 /* Contrast Control Enable */ | ||
| 1101 | #define PWMR_SRC_MASK 0x0600 /* Input Clock Source */ | ||
| 1102 | #define PWMR_SRC_LINE 0x0000 /* Line Pulse */ | ||
| 1103 | #define PWMR_SRC_PIXEL 0x0200 /* Pixel Clock */ | ||
| 1104 | #define PWMR_SRC_LCD 0x4000 /* LCD clock */ | ||
| 1105 | |||
| 1106 | /********** | ||
| 1107 | * | ||
| 1108 | * 0xFFFFFBxx -- Real-Time Clock (RTC) | ||
| 1109 | * | ||
| 1110 | **********/ | ||
| 1111 | |||
| 1112 | /* | ||
| 1113 | * RTC Hours Minutes and Seconds Register | ||
| 1114 | */ | ||
| 1115 | #define RTCTIME_ADDR 0xfffffb00 | ||
| 1116 | #define RTCTIME LONG_REF(RTCTIME_ADDR) | ||
| 1117 | |||
| 1118 | #define RTCTIME_SECONDS_MASK 0x0000003f /* Seconds */ | ||
| 1119 | #define RTCTIME_SECONDS_SHIFT 0 | ||
| 1120 | #define RTCTIME_MINUTES_MASK 0x003f0000 /* Minutes */ | ||
| 1121 | #define RTCTIME_MINUTES_SHIFT 16 | ||
| 1122 | #define RTCTIME_HOURS_MASK 0x1f000000 /* Hours */ | ||
| 1123 | #define RTCTIME_HOURS_SHIFT 24 | ||
| 1124 | |||
| 1125 | /* | ||
| 1126 | * RTC Alarm Register | ||
| 1127 | */ | ||
| 1128 | #define RTCALRM_ADDR 0xfffffb04 | ||
| 1129 | #define RTCALRM LONG_REF(RTCALRM_ADDR) | ||
| 1130 | |||
| 1131 | #define RTCALRM_SECONDS_MASK 0x0000003f /* Seconds */ | ||
| 1132 | #define RTCALRM_SECONDS_SHIFT 0 | ||
| 1133 | #define RTCALRM_MINUTES_MASK 0x003f0000 /* Minutes */ | ||
| 1134 | #define RTCALRM_MINUTES_SHIFT 16 | ||
| 1135 | #define RTCALRM_HOURS_MASK 0x1f000000 /* Hours */ | ||
| 1136 | #define RTCALRM_HOURS_SHIFT 24 | ||
| 1137 | |||
| 1138 | /* | ||
| 1139 | * Watchdog Timer Register | ||
| 1140 | */ | ||
| 1141 | #define WATCHDOG_ADDR 0xfffffb0a | ||
| 1142 | #define WATCHDOG WORD_REF(WATCHDOG_ADDR) | ||
| 1143 | |||
| 1144 | #define WATCHDOG_EN 0x0001 /* Watchdog Enabled */ | ||
| 1145 | #define WATCHDOG_ISEL 0x0002 /* Select the watchdog interrupt */ | ||
| 1146 | #define WATCHDOG_INTF 0x0080 /* Watchdog interrupt occcured */ | ||
| 1147 | #define WATCHDOG_CNT_MASK 0x0300 /* Watchdog Counter */ | ||
| 1148 | #define WATCHDOG_CNT_SHIFT 8 | ||
| 1149 | |||
| 1150 | /* | ||
| 1151 | * RTC Control Register | ||
| 1152 | */ | ||
| 1153 | #define RTCCTL_ADDR 0xfffffb0c | ||
| 1154 | #define RTCCTL WORD_REF(RTCCTL_ADDR) | ||
| 1155 | |||
| 1156 | #define RTCCTL_XTL 0x0020 /* Crystal Selection */ | ||
| 1157 | #define RTCCTL_EN 0x0080 /* RTC Enable */ | ||
| 1158 | |||
| 1159 | /* '328-compatible definitions */ | ||
| 1160 | #define RTCCTL_384 RTCCTL_XTL | ||
| 1161 | #define RTCCTL_ENABLE RTCCTL_EN | ||
| 1162 | |||
| 1163 | /* | ||
| 1164 | * RTC Interrupt Status Register | ||
| 1165 | */ | ||
| 1166 | #define RTCISR_ADDR 0xfffffb0e | ||
| 1167 | #define RTCISR WORD_REF(RTCISR_ADDR) | ||
| 1168 | |||
| 1169 | #define RTCISR_SW 0x0001 /* Stopwatch timed out */ | ||
| 1170 | #define RTCISR_MIN 0x0002 /* 1-minute interrupt has occurred */ | ||
| 1171 | #define RTCISR_ALM 0x0004 /* Alarm interrupt has occurred */ | ||
| 1172 | #define RTCISR_DAY 0x0008 /* 24-hour rollover interrupt has occurred */ | ||
| 1173 | #define RTCISR_1HZ 0x0010 /* 1Hz interrupt has occurred */ | ||
| 1174 | #define RTCISR_HR 0x0020 /* 1-hour interrupt has occurred */ | ||
| 1175 | #define RTCISR_SAM0 0x0100 /* 4Hz / 4.6875Hz interrupt has occurred */ | ||
| 1176 | #define RTCISR_SAM1 0x0200 /* 8Hz / 9.3750Hz interrupt has occurred */ | ||
| 1177 | #define RTCISR_SAM2 0x0400 /* 16Hz / 18.7500Hz interrupt has occurred */ | ||
| 1178 | #define RTCISR_SAM3 0x0800 /* 32Hz / 37.5000Hz interrupt has occurred */ | ||
| 1179 | #define RTCISR_SAM4 0x1000 /* 64Hz / 75.0000Hz interrupt has occurred */ | ||
| 1180 | #define RTCISR_SAM5 0x2000 /* 128Hz / 150.0000Hz interrupt has occurred */ | ||
| 1181 | #define RTCISR_SAM6 0x4000 /* 256Hz / 300.0000Hz interrupt has occurred */ | ||
| 1182 | #define RTCISR_SAM7 0x8000 /* 512Hz / 600.0000Hz interrupt has occurred */ | ||
| 1183 | |||
| 1184 | /* | ||
| 1185 | * RTC Interrupt Enable Register | ||
| 1186 | */ | ||
| 1187 | #define RTCIENR_ADDR 0xfffffb10 | ||
| 1188 | #define RTCIENR WORD_REF(RTCIENR_ADDR) | ||
| 1189 | |||
| 1190 | #define RTCIENR_SW 0x0001 /* Stopwatch interrupt enable */ | ||
| 1191 | #define RTCIENR_MIN 0x0002 /* 1-minute interrupt enable */ | ||
| 1192 | #define RTCIENR_ALM 0x0004 /* Alarm interrupt enable */ | ||
| 1193 | #define RTCIENR_DAY 0x0008 /* 24-hour rollover interrupt enable */ | ||
| 1194 | #define RTCIENR_1HZ 0x0010 /* 1Hz interrupt enable */ | ||
| 1195 | #define RTCIENR_HR 0x0020 /* 1-hour interrupt enable */ | ||
| 1196 | #define RTCIENR_SAM0 0x0100 /* 4Hz / 4.6875Hz interrupt enable */ | ||
| 1197 | #define RTCIENR_SAM1 0x0200 /* 8Hz / 9.3750Hz interrupt enable */ | ||
| 1198 | #define RTCIENR_SAM2 0x0400 /* 16Hz / 18.7500Hz interrupt enable */ | ||
| 1199 | #define RTCIENR_SAM3 0x0800 /* 32Hz / 37.5000Hz interrupt enable */ | ||
| 1200 | #define RTCIENR_SAM4 0x1000 /* 64Hz / 75.0000Hz interrupt enable */ | ||
| 1201 | #define RTCIENR_SAM5 0x2000 /* 128Hz / 150.0000Hz interrupt enable */ | ||
| 1202 | #define RTCIENR_SAM6 0x4000 /* 256Hz / 300.0000Hz interrupt enable */ | ||
| 1203 | #define RTCIENR_SAM7 0x8000 /* 512Hz / 600.0000Hz interrupt enable */ | ||
| 1204 | |||
| 1205 | /* | ||
| 1206 | * Stopwatch Minutes Register | ||
| 1207 | */ | ||
| 1208 | #define STPWCH_ADDR 0xfffffb12 | ||
| 1209 | #define STPWCH WORD_REF(STPWCH_ADDR) | ||
| 1210 | |||
| 1211 | #define STPWCH_CNT_MASK 0x003f /* Stopwatch countdown value */ | ||
| 1212 | #define SPTWCH_CNT_SHIFT 0 | ||
| 1213 | |||
| 1214 | /* | ||
| 1215 | * RTC Day Count Register | ||
| 1216 | */ | ||
| 1217 | #define DAYR_ADDR 0xfffffb1a | ||
| 1218 | #define DAYR WORD_REF(DAYR_ADDR) | ||
| 1219 | |||
| 1220 | #define DAYR_DAYS_MASK 0x1ff /* Day Setting */ | ||
| 1221 | #define DAYR_DAYS_SHIFT 0 | ||
| 1222 | |||
| 1223 | /* | ||
| 1224 | * RTC Day Alarm Register | ||
| 1225 | */ | ||
| 1226 | #define DAYALARM_ADDR 0xfffffb1c | ||
| 1227 | #define DAYALARM WORD_REF(DAYALARM_ADDR) | ||
| 1228 | |||
| 1229 | #define DAYALARM_DAYSAL_MASK 0x01ff /* Day Setting of the Alarm */ | ||
| 1230 | #define DAYALARM_DAYSAL_SHIFT 0 | ||
| 1231 | |||
| 1232 | /********** | ||
| 1233 | * | ||
| 1234 | * 0xFFFFFCxx -- DRAM Controller | ||
| 1235 | * | ||
| 1236 | **********/ | ||
| 1237 | |||
| 1238 | /* | ||
| 1239 | * DRAM Memory Configuration Register | ||
| 1240 | */ | ||
| 1241 | #define DRAMMC_ADDR 0xfffffc00 | ||
| 1242 | #define DRAMMC WORD_REF(DRAMMC_ADDR) | ||
| 1243 | |||
| 1244 | #define DRAMMC_ROW12_MASK 0xc000 /* Row address bit for MD12 */ | ||
| 1245 | #define DRAMMC_ROW12_PA10 0x0000 | ||
| 1246 | #define DRAMMC_ROW12_PA21 0x4000 | ||
| 1247 | #define DRAMMC_ROW12_PA23 0x8000 | ||
| 1248 | #define DRAMMC_ROW0_MASK 0x3000 /* Row address bit for MD0 */ | ||
| 1249 | #define DRAMMC_ROW0_PA11 0x0000 | ||
| 1250 | #define DRAMMC_ROW0_PA22 0x1000 | ||
| 1251 | #define DRAMMC_ROW0_PA23 0x2000 | ||
| 1252 | #define DRAMMC_ROW11 0x0800 /* Row address bit for MD11 PA20/PA22 */ | ||
| 1253 | #define DRAMMC_ROW10 0x0400 /* Row address bit for MD10 PA19/PA21 */ | ||
| 1254 | #define DRAMMC_ROW9 0x0200 /* Row address bit for MD9 PA9/PA19 */ | ||
| 1255 | #define DRAMMC_ROW8 0x0100 /* Row address bit for MD8 PA10/PA20 */ | ||
| 1256 | #define DRAMMC_COL10 0x0080 /* Col address bit for MD10 PA11/PA0 */ | ||
| 1257 | #define DRAMMC_COL9 0x0040 /* Col address bit for MD9 PA10/PA0 */ | ||
| 1258 | #define DRAMMC_COL8 0x0020 /* Col address bit for MD8 PA9/PA0 */ | ||
| 1259 | #define DRAMMC_REF_MASK 0x001f /* Reresh Cycle */ | ||
| 1260 | #define DRAMMC_REF_SHIFT 0 | ||
| 1261 | |||
| 1262 | /* | ||
| 1263 | * DRAM Control Register | ||
| 1264 | */ | ||
| 1265 | #define DRAMC_ADDR 0xfffffc02 | ||
| 1266 | #define DRAMC WORD_REF(DRAMC_ADDR) | ||
| 1267 | |||
| 1268 | #define DRAMC_DWE 0x0001 /* DRAM Write Enable */ | ||
| 1269 | #define DRAMC_RST 0x0002 /* Reset Burst Refresh Enable */ | ||
| 1270 | #define DRAMC_LPR 0x0004 /* Low-Power Refresh Enable */ | ||
| 1271 | #define DRAMC_SLW 0x0008 /* Slow RAM */ | ||
| 1272 | #define DRAMC_LSP 0x0010 /* Light Sleep */ | ||
| 1273 | #define DRAMC_MSW 0x0020 /* Slow Multiplexing */ | ||
| 1274 | #define DRAMC_WS_MASK 0x00c0 /* Wait-states */ | ||
| 1275 | #define DRAMC_WS_SHIFT 6 | ||
| 1276 | #define DRAMC_PGSZ_MASK 0x0300 /* Page Size for fast page mode */ | ||
| 1277 | #define DRAMC_PGSZ_SHIFT 8 | ||
| 1278 | #define DRAMC_PGSZ_256K 0x0000 | ||
| 1279 | #define DRAMC_PGSZ_512K 0x0100 | ||
| 1280 | #define DRAMC_PGSZ_1024K 0x0200 | ||
| 1281 | #define DRAMC_PGSZ_2048K 0x0300 | ||
| 1282 | #define DRAMC_EDO 0x0400 /* EDO DRAM */ | ||
| 1283 | #define DRAMC_CLK 0x0800 /* Refresh Timer Clock source select */ | ||
| 1284 | #define DRAMC_BC_MASK 0x3000 /* Page Access Clock Cycle (FP mode) */ | ||
| 1285 | #define DRAMC_BC_SHIFT 12 | ||
| 1286 | #define DRAMC_RM 0x4000 /* Refresh Mode */ | ||
| 1287 | #define DRAMC_EN 0x8000 /* DRAM Controller enable */ | ||
| 1288 | |||
| 1289 | |||
| 1290 | /********** | ||
| 1291 | * | ||
| 1292 | * 0xFFFFFDxx -- In-Circuit Emulation (ICE) | ||
| 1293 | * | ||
| 1294 | **********/ | ||
| 1295 | |||
| 1296 | /* | ||
| 1297 | * ICE Module Address Compare Register | ||
| 1298 | */ | ||
| 1299 | #define ICEMACR_ADDR 0xfffffd00 | ||
| 1300 | #define ICEMACR LONG_REF(ICEMACR_ADDR) | ||
| 1301 | |||
| 1302 | /* | ||
| 1303 | * ICE Module Address Mask Register | ||
| 1304 | */ | ||
| 1305 | #define ICEMAMR_ADDR 0xfffffd04 | ||
| 1306 | #define ICEMAMR LONG_REF(ICEMAMR_ADDR) | ||
| 1307 | |||
| 1308 | /* | ||
| 1309 | * ICE Module Control Compare Register | ||
| 1310 | */ | ||
| 1311 | #define ICEMCCR_ADDR 0xfffffd08 | ||
| 1312 | #define ICEMCCR WORD_REF(ICEMCCR_ADDR) | ||
| 1313 | |||
| 1314 | #define ICEMCCR_PD 0x0001 /* Program/Data Cycle Selection */ | ||
| 1315 | #define ICEMCCR_RW 0x0002 /* Read/Write Cycle Selection */ | ||
| 1316 | |||
| 1317 | /* | ||
| 1318 | * ICE Module Control Mask Register | ||
| 1319 | */ | ||
| 1320 | #define ICEMCMR_ADDR 0xfffffd0a | ||
| 1321 | #define ICEMCMR WORD_REF(ICEMCMR_ADDR) | ||
| 1322 | |||
| 1323 | #define ICEMCMR_PDM 0x0001 /* Program/Data Cycle Mask */ | ||
| 1324 | #define ICEMCMR_RWM 0x0002 /* Read/Write Cycle Mask */ | ||
| 1325 | |||
| 1326 | /* | ||
| 1327 | * ICE Module Control Register | ||
| 1328 | */ | ||
| 1329 | #define ICEMCR_ADDR 0xfffffd0c | ||
| 1330 | #define ICEMCR WORD_REF(ICEMCR_ADDR) | ||
| 1331 | |||
| 1332 | #define ICEMCR_CEN 0x0001 /* Compare Enable */ | ||
| 1333 | #define ICEMCR_PBEN 0x0002 /* Program Break Enable */ | ||
| 1334 | #define ICEMCR_SB 0x0004 /* Single Breakpoint */ | ||
| 1335 | #define ICEMCR_HMDIS 0x0008 /* HardMap disable */ | ||
| 1336 | #define ICEMCR_BBIEN 0x0010 /* Bus Break Interrupt Enable */ | ||
| 1337 | |||
| 1338 | /* | ||
| 1339 | * ICE Module Status Register | ||
| 1340 | */ | ||
| 1341 | #define ICEMSR_ADDR 0xfffffd0e | ||
| 1342 | #define ICEMSR WORD_REF(ICEMSR_ADDR) | ||
| 1343 | |||
| 1344 | #define ICEMSR_EMUEN 0x0001 /* Emulation Enable */ | ||
| 1345 | #define ICEMSR_BRKIRQ 0x0002 /* A-Line Vector Fetch Detected */ | ||
| 1346 | #define ICEMSR_BBIRQ 0x0004 /* Bus Break Interrupt Detected */ | ||
| 1347 | #define ICEMSR_EMIRQ 0x0008 /* EMUIRQ Falling Edge Detected */ | ||
| 1348 | |||
| 1349 | #endif /* _MC68VZ328_H_ */ | ||
diff --git a/arch/m68knommu/include/asm/anchor.h b/arch/m68knommu/include/asm/anchor.h deleted file mode 100644 index 871c0d5cfc3d..000000000000 --- a/arch/m68knommu/include/asm/anchor.h +++ /dev/null | |||
| @@ -1,112 +0,0 @@ | |||
| 1 | /****************************************************************************/ | ||
| 2 | |||
| 3 | /* | ||
| 4 | * anchor.h -- Anchor CO-MEM Lite PCI host bridge part. | ||
| 5 | * | ||
| 6 | * (C) Copyright 2000, Moreton Bay (www.moreton.com.au) | ||
| 7 | */ | ||
| 8 | |||
| 9 | /****************************************************************************/ | ||
| 10 | #ifndef anchor_h | ||
| 11 | #define anchor_h | ||
| 12 | /****************************************************************************/ | ||
| 13 | |||
| 14 | /* | ||
| 15 | * Define basic addressing info. | ||
| 16 | */ | ||
| 17 | #if defined(CONFIG_M5407C3) | ||
| 18 | #define COMEM_BASE 0xFFFF0000 /* Base of CO-MEM address space */ | ||
| 19 | #define COMEM_IRQ 25 /* IRQ of anchor part */ | ||
| 20 | #else | ||
| 21 | #define COMEM_BASE 0x80000000 /* Base of CO-MEM address space */ | ||
| 22 | #define COMEM_IRQ 25 /* IRQ of anchor part */ | ||
| 23 | #endif | ||
| 24 | |||
| 25 | /****************************************************************************/ | ||
| 26 | |||
| 27 | /* | ||
| 28 | * 4-byte registers of CO-MEM, so adjust register addresses for | ||
| 29 | * easy access. Handy macro for word access too. | ||
| 30 | */ | ||
| 31 | #define LREG(a) ((a) >> 2) | ||
| 32 | #define WREG(a) ((a) >> 1) | ||
| 33 | |||
| 34 | |||
| 35 | /* | ||
| 36 | * Define base addresses within CO-MEM Lite register address space. | ||
| 37 | */ | ||
| 38 | #define COMEM_I2O 0x0000 /* I2O registers */ | ||
| 39 | #define COMEM_OPREGS 0x0400 /* Operation registers */ | ||
| 40 | #define COMEM_PCIBUS 0x2000 /* Direct access to PCI bus */ | ||
| 41 | #define COMEM_SHMEM 0x4000 /* Shared memory region */ | ||
| 42 | |||
| 43 | #define COMEM_SHMEMSIZE 0x4000 /* Size of shared memory */ | ||
| 44 | |||
| 45 | |||
| 46 | /* | ||
| 47 | * Define CO-MEM Registers. | ||
| 48 | */ | ||
| 49 | #define COMEM_I2OHISR 0x0030 /* I2O host interrupt status */ | ||
| 50 | #define COMEM_I2OHIMR 0x0034 /* I2O host interrupt mask */ | ||
| 51 | #define COMEM_I2OLISR 0x0038 /* I2O local interrupt status */ | ||
| 52 | #define COMEM_I2OLIMR 0x003c /* I2O local interrupt mask */ | ||
| 53 | #define COMEM_IBFPFIFO 0x0040 /* I2O inbound free/post FIFO */ | ||
| 54 | #define COMEM_OBPFFIFO 0x0044 /* I2O outbound post/free FIFO */ | ||
| 55 | #define COMEM_IBPFFIFO 0x0048 /* I2O inbound post/free FIFO */ | ||
| 56 | #define COMEM_OBFPFIFO 0x004c /* I2O outbound free/post FIFO */ | ||
| 57 | |||
| 58 | #define COMEM_DAHBASE 0x0460 /* Direct access base address */ | ||
| 59 | |||
| 60 | #define COMEM_NVCMD 0x04a0 /* I2C serial command */ | ||
| 61 | #define COMEM_NVREAD 0x04a4 /* I2C serial read */ | ||
| 62 | #define COMEM_NVSTAT 0x04a8 /* I2C status */ | ||
| 63 | |||
| 64 | #define COMEM_DMALBASE 0x04b0 /* DMA local base address */ | ||
| 65 | #define COMEM_DMAHBASE 0x04b4 /* DMA host base address */ | ||
| 66 | #define COMEM_DMASIZE 0x04b8 /* DMA size */ | ||
| 67 | #define COMEM_DMACTL 0x04bc /* DMA control */ | ||
| 68 | |||
| 69 | #define COMEM_HCTL 0x04e0 /* Host control */ | ||
| 70 | #define COMEM_HINT 0x04e4 /* Host interrupt control/status */ | ||
| 71 | #define COMEM_HLDATA 0x04e8 /* Host to local data mailbox */ | ||
| 72 | #define COMEM_LINT 0x04f4 /* Local interrupt contole status */ | ||
| 73 | #define COMEM_LHDATA 0x04f8 /* Local to host data mailbox */ | ||
| 74 | |||
| 75 | #define COMEM_LBUSCFG 0x04fc /* Local bus configuration */ | ||
| 76 | |||
| 77 | |||
| 78 | /* | ||
| 79 | * Commands and flags for use with Direct Access Register. | ||
| 80 | */ | ||
| 81 | #define COMEM_DA_IACK 0x00000000 /* Interrupt acknowledge (read) */ | ||
| 82 | #define COMEM_DA_SPCL 0x00000010 /* Special cycle (write) */ | ||
| 83 | #define COMEM_DA_MEMRD 0x00000004 /* Memory read cycle */ | ||
| 84 | #define COMEM_DA_MEMWR 0x00000004 /* Memory write cycle */ | ||
| 85 | #define COMEM_DA_IORD 0x00000002 /* I/O read cycle */ | ||
| 86 | #define COMEM_DA_IOWR 0x00000002 /* I/O write cycle */ | ||
| 87 | #define COMEM_DA_CFGRD 0x00000006 /* Configuration read cycle */ | ||
| 88 | #define COMEM_DA_CFGWR 0x00000006 /* Configuration write cycle */ | ||
| 89 | |||
| 90 | #define COMEM_DA_ADDR(a) ((a) & 0xffffe000) | ||
| 91 | |||
| 92 | #define COMEM_DA_OFFSET(a) ((a) & 0x00001fff) | ||
| 93 | |||
| 94 | |||
| 95 | /* | ||
| 96 | * The PCI bus will be limited in what slots will actually be used. | ||
| 97 | * Define valid device numbers for different boards. | ||
| 98 | */ | ||
| 99 | #if defined(CONFIG_M5407C3) | ||
| 100 | #define COMEM_MINDEV 14 /* Minimum valid DEVICE */ | ||
| 101 | #define COMEM_MAXDEV 14 /* Maximum valid DEVICE */ | ||
| 102 | #define COMEM_BRIDGEDEV 15 /* Slot bridge is in */ | ||
| 103 | #else | ||
| 104 | #define COMEM_MINDEV 0 /* Minimum valid DEVICE */ | ||
| 105 | #define COMEM_MAXDEV 3 /* Maximum valid DEVICE */ | ||
| 106 | #endif | ||
| 107 | |||
| 108 | #define COMEM_MAXPCI (COMEM_MAXDEV+1) /* Maximum PCI devices */ | ||
| 109 | |||
| 110 | |||
| 111 | /****************************************************************************/ | ||
| 112 | #endif /* anchor_h */ | ||
diff --git a/arch/m68knommu/include/asm/atomic.h b/arch/m68knommu/include/asm/atomic.h deleted file mode 100644 index 6bb674855a3f..000000000000 --- a/arch/m68knommu/include/asm/atomic.h +++ /dev/null | |||
| @@ -1,155 +0,0 @@ | |||
| 1 | #ifndef __ARCH_M68KNOMMU_ATOMIC__ | ||
| 2 | #define __ARCH_M68KNOMMU_ATOMIC__ | ||
| 3 | |||
| 4 | #include <linux/types.h> | ||
| 5 | #include <asm/system.h> | ||
| 6 | |||
| 7 | /* | ||
| 8 | * Atomic operations that C can't guarantee us. Useful for | ||
| 9 | * resource counting etc.. | ||
| 10 | */ | ||
| 11 | |||
| 12 | /* | ||
| 13 | * We do not have SMP m68k systems, so we don't have to deal with that. | ||
| 14 | */ | ||
| 15 | |||
| 16 | #define ATOMIC_INIT(i) { (i) } | ||
| 17 | |||
| 18 | #define atomic_read(v) ((v)->counter) | ||
| 19 | #define atomic_set(v, i) (((v)->counter) = i) | ||
| 20 | |||
| 21 | static __inline__ void atomic_add(int i, atomic_t *v) | ||
| 22 | { | ||
| 23 | #ifdef CONFIG_COLDFIRE | ||
| 24 | __asm__ __volatile__("addl %1,%0" : "+m" (*v) : "d" (i)); | ||
| 25 | #else | ||
| 26 | __asm__ __volatile__("addl %1,%0" : "+m" (*v) : "di" (i)); | ||
| 27 | #endif | ||
| 28 | } | ||
| 29 | |||
| 30 | static __inline__ void atomic_sub(int i, atomic_t *v) | ||
| 31 | { | ||
| 32 | #ifdef CONFIG_COLDFIRE | ||
| 33 | __asm__ __volatile__("subl %1,%0" : "+m" (*v) : "d" (i)); | ||
| 34 | #else | ||
| 35 | __asm__ __volatile__("subl %1,%0" : "+m" (*v) : "di" (i)); | ||
| 36 | #endif | ||
| 37 | } | ||
| 38 | |||
| 39 | static __inline__ int atomic_sub_and_test(int i, atomic_t * v) | ||
| 40 | { | ||
| 41 | char c; | ||
| 42 | #ifdef CONFIG_COLDFIRE | ||
| 43 | __asm__ __volatile__("subl %2,%1; seq %0" | ||
| 44 | : "=d" (c), "+m" (*v) | ||
| 45 | : "d" (i)); | ||
| 46 | #else | ||
| 47 | __asm__ __volatile__("subl %2,%1; seq %0" | ||
| 48 | : "=d" (c), "+m" (*v) | ||
| 49 | : "di" (i)); | ||
| 50 | #endif | ||
| 51 | return c != 0; | ||
| 52 | } | ||
| 53 | |||
| 54 | static __inline__ void atomic_inc(volatile atomic_t *v) | ||
| 55 | { | ||
| 56 | __asm__ __volatile__("addql #1,%0" : "+m" (*v)); | ||
| 57 | } | ||
| 58 | |||
| 59 | /* | ||
| 60 | * atomic_inc_and_test - increment and test | ||
| 61 | * @v: pointer of type atomic_t | ||
| 62 | * | ||
| 63 | * Atomically increments @v by 1 | ||
| 64 | * and returns true if the result is zero, or false for all | ||
| 65 | * other cases. | ||
| 66 | */ | ||
| 67 | |||
| 68 | static __inline__ int atomic_inc_and_test(volatile atomic_t *v) | ||
| 69 | { | ||
| 70 | char c; | ||
| 71 | __asm__ __volatile__("addql #1,%1; seq %0" : "=d" (c), "+m" (*v)); | ||
| 72 | return c != 0; | ||
| 73 | } | ||
| 74 | |||
| 75 | static __inline__ void atomic_dec(volatile atomic_t *v) | ||
| 76 | { | ||
| 77 | __asm__ __volatile__("subql #1,%0" : "+m" (*v)); | ||
| 78 | } | ||
| 79 | |||
| 80 | static __inline__ int atomic_dec_and_test(volatile atomic_t *v) | ||
| 81 | { | ||
| 82 | char c; | ||
| 83 | __asm__ __volatile__("subql #1,%1; seq %0" : "=d" (c), "+m" (*v)); | ||
| 84 | return c != 0; | ||
| 85 | } | ||
| 86 | |||
| 87 | static __inline__ void atomic_clear_mask(unsigned long mask, unsigned long *v) | ||
| 88 | { | ||
| 89 | __asm__ __volatile__("andl %1,%0" : "+m" (*v) : "id" (~(mask))); | ||
| 90 | } | ||
| 91 | |||
| 92 | static __inline__ void atomic_set_mask(unsigned long mask, unsigned long *v) | ||
| 93 | { | ||
| 94 | __asm__ __volatile__("orl %1,%0" : "+m" (*v) : "id" (mask)); | ||
| 95 | } | ||
| 96 | |||
| 97 | /* Atomic operations are already serializing */ | ||
| 98 | #define smp_mb__before_atomic_dec() barrier() | ||
| 99 | #define smp_mb__after_atomic_dec() barrier() | ||
| 100 | #define smp_mb__before_atomic_inc() barrier() | ||
| 101 | #define smp_mb__after_atomic_inc() barrier() | ||
| 102 | |||
| 103 | static inline int atomic_add_return(int i, atomic_t * v) | ||
| 104 | { | ||
| 105 | unsigned long temp, flags; | ||
| 106 | |||
| 107 | local_irq_save(flags); | ||
| 108 | temp = *(long *)v; | ||
| 109 | temp += i; | ||
| 110 | *(long *)v = temp; | ||
| 111 | local_irq_restore(flags); | ||
| 112 | |||
| 113 | return temp; | ||
| 114 | } | ||
| 115 | |||
| 116 | #define atomic_add_negative(a, v) (atomic_add_return((a), (v)) < 0) | ||
| 117 | |||
| 118 | static inline int atomic_sub_return(int i, atomic_t * v) | ||
| 119 | { | ||
| 120 | unsigned long temp, flags; | ||
| 121 | |||
| 122 | local_irq_save(flags); | ||
| 123 | temp = *(long *)v; | ||
| 124 | temp -= i; | ||
| 125 | *(long *)v = temp; | ||
| 126 | local_irq_restore(flags); | ||
| 127 | |||
| 128 | return temp; | ||
| 129 | } | ||
| 130 | |||
| 131 | #define atomic_cmpxchg(v, o, n) ((int)cmpxchg(&((v)->counter), (o), (n))) | ||
| 132 | #define atomic_xchg(v, new) (xchg(&((v)->counter), new)) | ||
| 133 | |||
| 134 | static __inline__ int atomic_add_unless(atomic_t *v, int a, int u) | ||
| 135 | { | ||
| 136 | int c, old; | ||
| 137 | c = atomic_read(v); | ||
| 138 | for (;;) { | ||
| 139 | if (unlikely(c == (u))) | ||
| 140 | break; | ||
| 141 | old = atomic_cmpxchg((v), c, c + (a)); | ||
| 142 | if (likely(old == c)) | ||
| 143 | break; | ||
| 144 | c = old; | ||
| 145 | } | ||
| 146 | return c != (u); | ||
| 147 | } | ||
| 148 | |||
| 149 | #define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0) | ||
| 150 | |||
| 151 | #define atomic_dec_return(v) atomic_sub_return(1,(v)) | ||
| 152 | #define atomic_inc_return(v) atomic_add_return(1,(v)) | ||
| 153 | |||
| 154 | #include <asm-generic/atomic.h> | ||
| 155 | #endif /* __ARCH_M68KNOMMU_ATOMIC __ */ | ||
diff --git a/arch/m68knommu/include/asm/auxvec.h b/arch/m68knommu/include/asm/auxvec.h deleted file mode 100644 index 844d6d52204b..000000000000 --- a/arch/m68knommu/include/asm/auxvec.h +++ /dev/null | |||
| @@ -1,4 +0,0 @@ | |||
| 1 | #ifndef __ASMm68k_AUXVEC_H | ||
| 2 | #define __ASMm68k_AUXVEC_H | ||
| 3 | |||
| 4 | #endif | ||
diff --git a/arch/m68knommu/include/asm/bitops.h b/arch/m68knommu/include/asm/bitops.h deleted file mode 100644 index 9d3cbe5fad1e..000000000000 --- a/arch/m68knommu/include/asm/bitops.h +++ /dev/null | |||
| @@ -1,337 +0,0 @@ | |||
| 1 | #ifndef _M68KNOMMU_BITOPS_H | ||
| 2 | #define _M68KNOMMU_BITOPS_H | ||
| 3 | |||
| 4 | /* | ||
| 5 | * Copyright 1992, Linus Torvalds. | ||
| 6 | */ | ||
| 7 | |||
| 8 | #include <linux/compiler.h> | ||
| 9 | #include <asm/byteorder.h> /* swab32 */ | ||
| 10 | |||
| 11 | #ifdef __KERNEL__ | ||
| 12 | |||
| 13 | #ifndef _LINUX_BITOPS_H | ||
| 14 | #error only <linux/bitops.h> can be included directly | ||
| 15 | #endif | ||
| 16 | |||
| 17 | #if defined (__mcfisaaplus__) || defined (__mcfisac__) | ||
| 18 | static inline int ffs(unsigned int val) | ||
| 19 | { | ||
| 20 | if (!val) | ||
| 21 | return 0; | ||
| 22 | |||
| 23 | asm volatile( | ||
| 24 | "bitrev %0\n\t" | ||
| 25 | "ff1 %0\n\t" | ||
| 26 | : "=d" (val) | ||
| 27 | : "0" (val) | ||
| 28 | ); | ||
| 29 | val++; | ||
| 30 | return val; | ||
| 31 | } | ||
| 32 | |||
| 33 | static inline int __ffs(unsigned int val) | ||
| 34 | { | ||
| 35 | asm volatile( | ||
| 36 | "bitrev %0\n\t" | ||
| 37 | "ff1 %0\n\t" | ||
| 38 | : "=d" (val) | ||
| 39 | : "0" (val) | ||
| 40 | ); | ||
| 41 | return val; | ||
| 42 | } | ||
| 43 | |||
| 44 | #else | ||
| 45 | #include <asm-generic/bitops/ffs.h> | ||
| 46 | #include <asm-generic/bitops/__ffs.h> | ||
| 47 | #endif | ||
| 48 | |||
| 49 | #include <asm-generic/bitops/sched.h> | ||
| 50 | #include <asm-generic/bitops/ffz.h> | ||
| 51 | |||
| 52 | static __inline__ void set_bit(int nr, volatile unsigned long * addr) | ||
| 53 | { | ||
| 54 | #ifdef CONFIG_COLDFIRE | ||
| 55 | __asm__ __volatile__ ("lea %0,%%a0; bset %1,(%%a0)" | ||
| 56 | : "+m" (((volatile char *)addr)[(nr^31) >> 3]) | ||
| 57 | : "d" (nr) | ||
| 58 | : "%a0", "cc"); | ||
| 59 | #else | ||
| 60 | __asm__ __volatile__ ("bset %1,%0" | ||
| 61 | : "+m" (((volatile char *)addr)[(nr^31) >> 3]) | ||
| 62 | : "di" (nr) | ||
| 63 | : "cc"); | ||
| 64 | #endif | ||
| 65 | } | ||
| 66 | |||
| 67 | #define __set_bit(nr, addr) set_bit(nr, addr) | ||
| 68 | |||
| 69 | /* | ||
| 70 | * clear_bit() doesn't provide any barrier for the compiler. | ||
| 71 | */ | ||
| 72 | #define smp_mb__before_clear_bit() barrier() | ||
| 73 | #define smp_mb__after_clear_bit() barrier() | ||
| 74 | |||
| 75 | static __inline__ void clear_bit(int nr, volatile unsigned long * addr) | ||
| 76 | { | ||
| 77 | #ifdef CONFIG_COLDFIRE | ||
| 78 | __asm__ __volatile__ ("lea %0,%%a0; bclr %1,(%%a0)" | ||
| 79 | : "+m" (((volatile char *)addr)[(nr^31) >> 3]) | ||
| 80 | : "d" (nr) | ||
| 81 | : "%a0", "cc"); | ||
| 82 | #else | ||
| 83 | __asm__ __volatile__ ("bclr %1,%0" | ||
| 84 | : "+m" (((volatile char *)addr)[(nr^31) >> 3]) | ||
| 85 | : "di" (nr) | ||
| 86 | : "cc"); | ||
| 87 | #endif | ||
| 88 | } | ||
| 89 | |||
| 90 | #define __clear_bit(nr, addr) clear_bit(nr, addr) | ||
| 91 | |||
| 92 | static __inline__ void change_bit(int nr, volatile unsigned long * addr) | ||
| 93 | { | ||
| 94 | #ifdef CONFIG_COLDFIRE | ||
| 95 | __asm__ __volatile__ ("lea %0,%%a0; bchg %1,(%%a0)" | ||
| 96 | : "+m" (((volatile char *)addr)[(nr^31) >> 3]) | ||
| 97 | : "d" (nr) | ||
| 98 | : "%a0", "cc"); | ||
| 99 | #else | ||
| 100 | __asm__ __volatile__ ("bchg %1,%0" | ||
| 101 | : "+m" (((volatile char *)addr)[(nr^31) >> 3]) | ||
| 102 | : "di" (nr) | ||
| 103 | : "cc"); | ||
| 104 | #endif | ||
| 105 | } | ||
| 106 | |||
| 107 | #define __change_bit(nr, addr) change_bit(nr, addr) | ||
| 108 | |||
| 109 | static __inline__ int test_and_set_bit(int nr, volatile unsigned long * addr) | ||
| 110 | { | ||
| 111 | char retval; | ||
| 112 | |||
| 113 | #ifdef CONFIG_COLDFIRE | ||
| 114 | __asm__ __volatile__ ("lea %1,%%a0; bset %2,(%%a0); sne %0" | ||
| 115 | : "=d" (retval), "+m" (((volatile char *)addr)[(nr^31) >> 3]) | ||
| 116 | : "d" (nr) | ||
| 117 | : "%a0"); | ||
| 118 | #else | ||
| 119 | __asm__ __volatile__ ("bset %2,%1; sne %0" | ||
| 120 | : "=d" (retval), "+m" (((volatile char *)addr)[(nr^31) >> 3]) | ||
| 121 | : "di" (nr) | ||
| 122 | /* No clobber */); | ||
| 123 | #endif | ||
| 124 | |||
| 125 | return retval; | ||
| 126 | } | ||
| 127 | |||
| 128 | #define __test_and_set_bit(nr, addr) test_and_set_bit(nr, addr) | ||
| 129 | |||
| 130 | static __inline__ int test_and_clear_bit(int nr, volatile unsigned long * addr) | ||
| 131 | { | ||
| 132 | char retval; | ||
| 133 | |||
| 134 | #ifdef CONFIG_COLDFIRE | ||
| 135 | __asm__ __volatile__ ("lea %1,%%a0; bclr %2,(%%a0); sne %0" | ||
| 136 | : "=d" (retval), "+m" (((volatile char *)addr)[(nr^31) >> 3]) | ||
| 137 | : "d" (nr) | ||
| 138 | : "%a0"); | ||
| 139 | #else | ||
| 140 | __asm__ __volatile__ ("bclr %2,%1; sne %0" | ||
| 141 | : "=d" (retval), "+m" (((volatile char *)addr)[(nr^31) >> 3]) | ||
| 142 | : "di" (nr) | ||
| 143 | /* No clobber */); | ||
| 144 | #endif | ||
| 145 | |||
| 146 | return retval; | ||
| 147 | } | ||
| 148 | |||
| 149 | #define __test_and_clear_bit(nr, addr) test_and_clear_bit(nr, addr) | ||
| 150 | |||
| 151 | static __inline__ int test_and_change_bit(int nr, volatile unsigned long * addr) | ||
| 152 | { | ||
| 153 | char retval; | ||
| 154 | |||
| 155 | #ifdef CONFIG_COLDFIRE | ||
| 156 | __asm__ __volatile__ ("lea %1,%%a0\n\tbchg %2,(%%a0)\n\tsne %0" | ||
| 157 | : "=d" (retval), "+m" (((volatile char *)addr)[(nr^31) >> 3]) | ||
| 158 | : "d" (nr) | ||
| 159 | : "%a0"); | ||
| 160 | #else | ||
| 161 | __asm__ __volatile__ ("bchg %2,%1; sne %0" | ||
| 162 | : "=d" (retval), "+m" (((volatile char *)addr)[(nr^31) >> 3]) | ||
| 163 | : "di" (nr) | ||
| 164 | /* No clobber */); | ||
| 165 | #endif | ||
| 166 | |||
| 167 | return retval; | ||
| 168 | } | ||
| 169 | |||
| 170 | #define __test_and_change_bit(nr, addr) test_and_change_bit(nr, addr) | ||
| 171 | |||
| 172 | /* | ||
| 173 | * This routine doesn't need to be atomic. | ||
| 174 | */ | ||
| 175 | static __inline__ int __constant_test_bit(int nr, const volatile unsigned long * addr) | ||
| 176 | { | ||
| 177 | return ((1UL << (nr & 31)) & (((const volatile unsigned int *) addr)[nr >> 5])) != 0; | ||
| 178 | } | ||
| 179 | |||
| 180 | static __inline__ int __test_bit(int nr, const volatile unsigned long * addr) | ||
| 181 | { | ||
| 182 | int * a = (int *) addr; | ||
| 183 | int mask; | ||
| 184 | |||
| 185 | a += nr >> 5; | ||
| 186 | mask = 1 << (nr & 0x1f); | ||
| 187 | return ((mask & *a) != 0); | ||
| 188 | } | ||
| 189 | |||
| 190 | #define test_bit(nr,addr) \ | ||
| 191 | (__builtin_constant_p(nr) ? \ | ||
| 192 | __constant_test_bit((nr),(addr)) : \ | ||
| 193 | __test_bit((nr),(addr))) | ||
| 194 | |||
| 195 | #include <asm-generic/bitops/find.h> | ||
| 196 | #include <asm-generic/bitops/hweight.h> | ||
| 197 | #include <asm-generic/bitops/lock.h> | ||
| 198 | |||
| 199 | static __inline__ int ext2_set_bit(int nr, volatile void * addr) | ||
| 200 | { | ||
| 201 | char retval; | ||
| 202 | |||
| 203 | #ifdef CONFIG_COLDFIRE | ||
| 204 | __asm__ __volatile__ ("lea %1,%%a0; bset %2,(%%a0); sne %0" | ||
| 205 | : "=d" (retval), "+m" (((volatile char *)addr)[nr >> 3]) | ||
| 206 | : "d" (nr) | ||
| 207 | : "%a0"); | ||
| 208 | #else | ||
| 209 | __asm__ __volatile__ ("bset %2,%1; sne %0" | ||
| 210 | : "=d" (retval), "+m" (((volatile char *)addr)[nr >> 3]) | ||
| 211 | : "di" (nr) | ||
| 212 | /* No clobber */); | ||
| 213 | #endif | ||
| 214 | |||
| 215 | return retval; | ||
| 216 | } | ||
| 217 | |||
| 218 | static __inline__ int ext2_clear_bit(int nr, volatile void * addr) | ||
| 219 | { | ||
| 220 | char retval; | ||
| 221 | |||
| 222 | #ifdef CONFIG_COLDFIRE | ||
| 223 | __asm__ __volatile__ ("lea %1,%%a0; bclr %2,(%%a0); sne %0" | ||
| 224 | : "=d" (retval), "+m" (((volatile char *)addr)[nr >> 3]) | ||
| 225 | : "d" (nr) | ||
| 226 | : "%a0"); | ||
| 227 | #else | ||
| 228 | __asm__ __volatile__ ("bclr %2,%1; sne %0" | ||
| 229 | : "=d" (retval), "+m" (((volatile char *)addr)[nr >> 3]) | ||
| 230 | : "di" (nr) | ||
| 231 | /* No clobber */); | ||
| 232 | #endif | ||
| 233 | |||
| 234 | return retval; | ||
| 235 | } | ||
| 236 | |||
| 237 | #define ext2_set_bit_atomic(lock, nr, addr) \ | ||
| 238 | ({ \ | ||
| 239 | int ret; \ | ||
| 240 | spin_lock(lock); \ | ||
| 241 | ret = ext2_set_bit((nr), (addr)); \ | ||
| 242 | spin_unlock(lock); \ | ||
| 243 | ret; \ | ||
| 244 | }) | ||
| 245 | |||
| 246 | #define ext2_clear_bit_atomic(lock, nr, addr) \ | ||
| 247 | ({ \ | ||
| 248 | int ret; \ | ||
| 249 | spin_lock(lock); \ | ||
| 250 | ret = ext2_clear_bit((nr), (addr)); \ | ||
| 251 | spin_unlock(lock); \ | ||
| 252 | ret; \ | ||
| 253 | }) | ||
| 254 | |||
| 255 | static __inline__ int ext2_test_bit(int nr, const volatile void * addr) | ||
| 256 | { | ||
| 257 | char retval; | ||
| 258 | |||
| 259 | #ifdef CONFIG_COLDFIRE | ||
| 260 | __asm__ __volatile__ ("lea %1,%%a0; btst %2,(%%a0); sne %0" | ||
| 261 | : "=d" (retval) | ||
| 262 | : "m" (((const volatile char *)addr)[nr >> 3]), "d" (nr) | ||
| 263 | : "%a0"); | ||
| 264 | #else | ||
| 265 | __asm__ __volatile__ ("btst %2,%1; sne %0" | ||
| 266 | : "=d" (retval) | ||
| 267 | : "m" (((const volatile char *)addr)[nr >> 3]), "di" (nr) | ||
| 268 | /* No clobber */); | ||
| 269 | #endif | ||
| 270 | |||
| 271 | return retval; | ||
| 272 | } | ||
| 273 | |||
| 274 | #define ext2_find_first_zero_bit(addr, size) \ | ||
| 275 | ext2_find_next_zero_bit((addr), (size), 0) | ||
| 276 | |||
| 277 | static __inline__ unsigned long ext2_find_next_zero_bit(void *addr, unsigned long size, unsigned long offset) | ||
| 278 | { | ||
| 279 | unsigned long *p = ((unsigned long *) addr) + (offset >> 5); | ||
| 280 | unsigned long result = offset & ~31UL; | ||
| 281 | unsigned long tmp; | ||
| 282 | |||
| 283 | if (offset >= size) | ||
| 284 | return size; | ||
| 285 | size -= result; | ||
| 286 | offset &= 31UL; | ||
| 287 | if(offset) { | ||
| 288 | /* We hold the little endian value in tmp, but then the | ||
| 289 | * shift is illegal. So we could keep a big endian value | ||
| 290 | * in tmp, like this: | ||
| 291 | * | ||
| 292 | * tmp = __swab32(*(p++)); | ||
| 293 | * tmp |= ~0UL >> (32-offset); | ||
| 294 | * | ||
| 295 | * but this would decrease performance, so we change the | ||
| 296 | * shift: | ||
| 297 | */ | ||
| 298 | tmp = *(p++); | ||
| 299 | tmp |= __swab32(~0UL >> (32-offset)); | ||
| 300 | if(size < 32) | ||
| 301 | goto found_first; | ||
| 302 | if(~tmp) | ||
| 303 | goto found_middle; | ||
| 304 | size -= 32; | ||
| 305 | result += 32; | ||
| 306 | } | ||
| 307 | while(size & ~31UL) { | ||
| 308 | if(~(tmp = *(p++))) | ||
| 309 | goto found_middle; | ||
| 310 | result += 32; | ||
| 311 | size -= 32; | ||
| 312 | } | ||
| 313 | if(!size) | ||
| 314 | return result; | ||
| 315 | tmp = *p; | ||
| 316 | |||
| 317 | found_first: | ||
| 318 | /* tmp is little endian, so we would have to swab the shift, | ||
| 319 | * see above. But then we have to swab tmp below for ffz, so | ||
| 320 | * we might as well do this here. | ||
| 321 | */ | ||
| 322 | return result + ffz(__swab32(tmp) | (~0UL << size)); | ||
| 323 | found_middle: | ||
| 324 | return result + ffz(__swab32(tmp)); | ||
| 325 | } | ||
| 326 | |||
| 327 | #define ext2_find_next_bit(addr, size, off) \ | ||
| 328 | generic_find_next_le_bit((unsigned long *)(addr), (size), (off)) | ||
| 329 | #include <asm-generic/bitops/minix.h> | ||
| 330 | |||
| 331 | #endif /* __KERNEL__ */ | ||
| 332 | |||
| 333 | #include <asm-generic/bitops/fls.h> | ||
| 334 | #include <asm-generic/bitops/__fls.h> | ||
| 335 | #include <asm-generic/bitops/fls64.h> | ||
| 336 | |||
| 337 | #endif /* _M68KNOMMU_BITOPS_H */ | ||
diff --git a/arch/m68knommu/include/asm/bootinfo.h b/arch/m68knommu/include/asm/bootinfo.h deleted file mode 100644 index c12e526f5189..000000000000 --- a/arch/m68knommu/include/asm/bootinfo.h +++ /dev/null | |||
| @@ -1,2 +0,0 @@ | |||
| 1 | |||
| 2 | /* Nothing for m68knommu */ | ||
diff --git a/arch/m68knommu/include/asm/bootstd.h b/arch/m68knommu/include/asm/bootstd.h deleted file mode 100644 index bdc1a4ac4fe9..000000000000 --- a/arch/m68knommu/include/asm/bootstd.h +++ /dev/null | |||
| @@ -1,132 +0,0 @@ | |||
| 1 | /* bootstd.h: Bootloader system call interface | ||
| 2 | * | ||
| 3 | * (c) 1999, Rt-Control, Inc. | ||
| 4 | */ | ||
| 5 | |||
| 6 | #ifndef __BOOTSTD_H__ | ||
| 7 | #define __BOOTSTD_H__ | ||
| 8 | |||
| 9 | #define NR_BSC 21 /* last used bootloader system call */ | ||
| 10 | |||
| 11 | #define __BN_reset 0 /* reset and start the bootloader */ | ||
| 12 | #define __BN_test 1 /* tests the system call interface */ | ||
| 13 | #define __BN_exec 2 /* executes a bootloader image */ | ||
| 14 | #define __BN_exit 3 /* terminates a bootloader image */ | ||
| 15 | #define __BN_program 4 /* program FLASH from a chain */ | ||
| 16 | #define __BN_erase 5 /* erase sector(s) of FLASH */ | ||
| 17 | #define __BN_open 6 | ||
| 18 | #define __BN_write 7 | ||
| 19 | #define __BN_read 8 | ||
| 20 | #define __BN_close 9 | ||
| 21 | #define __BN_mmap 10 /* map a file descriptor into memory */ | ||
| 22 | #define __BN_munmap 11 /* remove a file to memory mapping */ | ||
| 23 | #define __BN_gethwaddr 12 /* get the hardware address of my interfaces */ | ||
| 24 | #define __BN_getserialnum 13 /* get the serial number of this board */ | ||
| 25 | #define __BN_getbenv 14 /* get a bootloader envvar */ | ||
| 26 | #define __BN_setbenv 15 /* get a bootloader envvar */ | ||
| 27 | #define __BN_setpmask 16 /* set the protection mask */ | ||
| 28 | #define __BN_readenv 17 /* read environment variables */ | ||
| 29 | #define __BN_flash_chattr_range 18 | ||
| 30 | #define __BN_flash_erase_range 19 | ||
| 31 | #define __BN_flash_write_range 20 | ||
| 32 | |||
| 33 | /* Calling conventions compatible to (uC)linux/68k | ||
| 34 | * We use simmilar macros to call into the bootloader as for uClinux | ||
| 35 | */ | ||
| 36 | |||
| 37 | #define __bsc_return(type, res) \ | ||
| 38 | do { \ | ||
| 39 | if ((unsigned long)(res) >= (unsigned long)(-64)) { \ | ||
| 40 | /* let errno be a function, preserve res in %d0 */ \ | ||
| 41 | int __err = -(res); \ | ||
| 42 | errno = __err; \ | ||
| 43 | res = -1; \ | ||
| 44 | } \ | ||
| 45 | return (type)(res); \ | ||
| 46 | } while (0) | ||
| 47 | |||
| 48 | #define _bsc0(type,name) \ | ||
| 49 | type name(void) \ | ||
| 50 | { \ | ||
| 51 | register long __res __asm__ ("%d0") = __BN_##name; \ | ||
| 52 | __asm__ __volatile__ ("trap #2" \ | ||
| 53 | : "=g" (__res) \ | ||
| 54 | : "0" (__res) \ | ||
| 55 | ); \ | ||
| 56 | __bsc_return(type,__res); \ | ||
| 57 | } | ||
| 58 | |||
| 59 | #define _bsc1(type,name,atype,a) \ | ||
| 60 | type name(atype a) \ | ||
| 61 | { \ | ||
| 62 | register long __res __asm__ ("%d0") = __BN_##name; \ | ||
| 63 | register long __a __asm__ ("%d1") = (long)a; \ | ||
| 64 | __asm__ __volatile__ ("trap #2" \ | ||
| 65 | : "=g" (__res) \ | ||
| 66 | : "0" (__res), "d" (__a) \ | ||
| 67 | ); \ | ||
| 68 | __bsc_return(type,__res); \ | ||
| 69 | } | ||
| 70 | |||
| 71 | #define _bsc2(type,name,atype,a,btype,b) \ | ||
| 72 | type name(atype a, btype b) \ | ||
| 73 | { \ | ||
| 74 | register long __res __asm__ ("%d0") = __BN_##name; \ | ||
| 75 | register long __a __asm__ ("%d1") = (long)a; \ | ||
| 76 | register long __b __asm__ ("%d2") = (long)b; \ | ||
| 77 | __asm__ __volatile__ ("trap #2" \ | ||
| 78 | : "=g" (__res) \ | ||
| 79 | : "0" (__res), "d" (__a), "d" (__b) \ | ||
| 80 | ); \ | ||
| 81 | __bsc_return(type,__res); \ | ||
| 82 | } | ||
| 83 | |||
| 84 | #define _bsc3(type,name,atype,a,btype,b,ctype,c) \ | ||
| 85 | type name(atype a, btype b, ctype c) \ | ||
| 86 | { \ | ||
| 87 | register long __res __asm__ ("%d0") = __BN_##name; \ | ||
| 88 | register long __a __asm__ ("%d1") = (long)a; \ | ||
| 89 | register long __b __asm__ ("%d2") = (long)b; \ | ||
| 90 | register long __c __asm__ ("%d3") = (long)c; \ | ||
| 91 | __asm__ __volatile__ ("trap #2" \ | ||
| 92 | : "=g" (__res) \ | ||
| 93 | : "0" (__res), "d" (__a), "d" (__b), \ | ||
| 94 | "d" (__c) \ | ||
| 95 | ); \ | ||
| 96 | __bsc_return(type,__res); \ | ||
| 97 | } | ||
| 98 | |||
| 99 | #define _bsc4(type,name,atype,a,btype,b,ctype,c,dtype,d) \ | ||
| 100 | type name(atype a, btype b, ctype c, dtype d) \ | ||
| 101 | { \ | ||
| 102 | register long __res __asm__ ("%d0") = __BN_##name; \ | ||
| 103 | register long __a __asm__ ("%d1") = (long)a; \ | ||
| 104 | register long __b __asm__ ("%d2") = (long)b; \ | ||
| 105 | register long __c __asm__ ("%d3") = (long)c; \ | ||
| 106 | register long __d __asm__ ("%d4") = (long)d; \ | ||
| 107 | __asm__ __volatile__ ("trap #2" \ | ||
| 108 | : "=g" (__res) \ | ||
| 109 | : "0" (__res), "d" (__a), "d" (__b), \ | ||
| 110 | "d" (__c), "d" (__d) \ | ||
| 111 | ); \ | ||
| 112 | __bsc_return(type,__res); \ | ||
| 113 | } | ||
| 114 | |||
| 115 | #define _bsc5(type,name,atype,a,btype,b,ctype,c,dtype,d,etype,e) \ | ||
| 116 | type name(atype a, btype b, ctype c, dtype d, etype e) \ | ||
| 117 | { \ | ||
| 118 | register long __res __asm__ ("%d0") = __BN_##name; \ | ||
| 119 | register long __a __asm__ ("%d1") = (long)a; \ | ||
| 120 | register long __b __asm__ ("%d2") = (long)b; \ | ||
| 121 | register long __c __asm__ ("%d3") = (long)c; \ | ||
| 122 | register long __d __asm__ ("%d4") = (long)d; \ | ||
| 123 | register long __e __asm__ ("%d5") = (long)e; \ | ||
| 124 | __asm__ __volatile__ ("trap #2" \ | ||
| 125 | : "=g" (__res) \ | ||
| 126 | : "0" (__res), "d" (__a), "d" (__b), \ | ||
| 127 | "d" (__c), "d" (__d), "d" (__e) \ | ||
| 128 | ); \ | ||
| 129 | __bsc_return(type,__res); \ | ||
| 130 | } | ||
| 131 | |||
| 132 | #endif /* __BOOTSTD_H__ */ | ||
diff --git a/arch/m68knommu/include/asm/bug.h b/arch/m68knommu/include/asm/bug.h deleted file mode 100644 index 70e7dc0af21a..000000000000 --- a/arch/m68knommu/include/asm/bug.h +++ /dev/null | |||
| @@ -1,4 +0,0 @@ | |||
| 1 | #ifndef _M68KNOMMU_BUG_H | ||
| 2 | #define _M68KNOMMU_BUG_H | ||
| 3 | #include <asm-generic/bug.h> | ||
| 4 | #endif | ||
diff --git a/arch/m68knommu/include/asm/bugs.h b/arch/m68knommu/include/asm/bugs.h deleted file mode 100644 index 5f382dac3a60..000000000000 --- a/arch/m68knommu/include/asm/bugs.h +++ /dev/null | |||
| @@ -1,16 +0,0 @@ | |||
| 1 | /* | ||
| 2 | * include/asm-m68k/bugs.h | ||
| 3 | * | ||
| 4 | * Copyright (C) 1994 Linus Torvalds | ||
| 5 | */ | ||
| 6 | |||
| 7 | /* | ||
| 8 | * This is included by init/main.c to check for architecture-dependent bugs. | ||
| 9 | * | ||
| 10 | * Needs: | ||
| 11 | * void check_bugs(void); | ||
| 12 | */ | ||
| 13 | |||
| 14 | static void check_bugs(void) | ||
| 15 | { | ||
| 16 | } | ||
diff --git a/arch/m68knommu/include/asm/byteorder.h b/arch/m68knommu/include/asm/byteorder.h deleted file mode 100644 index 9c6c76a15041..000000000000 --- a/arch/m68knommu/include/asm/byteorder.h +++ /dev/null | |||
| @@ -1,6 +0,0 @@ | |||
| 1 | #ifndef _M68KNOMMU_BYTEORDER_H | ||
| 2 | #define _M68KNOMMU_BYTEORDER_H | ||
| 3 | |||
| 4 | #include <linux/byteorder/big_endian.h> | ||
| 5 | |||
| 6 | #endif /* _M68KNOMMU_BYTEORDER_H */ | ||
diff --git a/arch/m68knommu/include/asm/cache.h b/arch/m68knommu/include/asm/cache.h deleted file mode 100644 index 24e9eace5f8c..000000000000 --- a/arch/m68knommu/include/asm/cache.h +++ /dev/null | |||
| @@ -1,12 +0,0 @@ | |||
| 1 | #ifndef __ARCH_M68KNOMMU_CACHE_H | ||
| 2 | #define __ARCH_M68KNOMMU_CACHE_H | ||
| 3 | |||
| 4 | /* bytes per L1 cache line */ | ||
| 5 | #define L1_CACHE_BYTES 16 /* this need to be at least 1 */ | ||
| 6 | |||
| 7 | /* m68k-elf-gcc 2.95.2 doesn't like these */ | ||
| 8 | |||
| 9 | #define __cacheline_aligned | ||
| 10 | #define ____cacheline_aligned | ||
| 11 | |||
| 12 | #endif | ||
diff --git a/arch/m68knommu/include/asm/cachectl.h b/arch/m68knommu/include/asm/cachectl.h deleted file mode 100644 index bcf5a6a9dd52..000000000000 --- a/arch/m68knommu/include/asm/cachectl.h +++ /dev/null | |||
| @@ -1 +0,0 @@ | |||
| 1 | #include <asm-m68k/cachectl.h> | ||
diff --git a/arch/m68knommu/include/asm/cacheflush.h b/arch/m68knommu/include/asm/cacheflush.h deleted file mode 100644 index 87e5dc0413b4..000000000000 --- a/arch/m68knommu/include/asm/cacheflush.h +++ /dev/null | |||
| @@ -1,84 +0,0 @@ | |||
| 1 | #ifndef _M68KNOMMU_CACHEFLUSH_H | ||
| 2 | #define _M68KNOMMU_CACHEFLUSH_H | ||
| 3 | |||
| 4 | /* | ||
| 5 | * (C) Copyright 2000-2004, Greg Ungerer <gerg@snapgear.com> | ||
| 6 | */ | ||
| 7 | #include <linux/mm.h> | ||
| 8 | |||
| 9 | #define flush_cache_all() __flush_cache_all() | ||
| 10 | #define flush_cache_mm(mm) do { } while (0) | ||
| 11 | #define flush_cache_dup_mm(mm) do { } while (0) | ||
| 12 | #define flush_cache_range(vma, start, end) __flush_cache_all() | ||
| 13 | #define flush_cache_page(vma, vmaddr) do { } while (0) | ||
| 14 | #define flush_dcache_range(start,len) __flush_cache_all() | ||
| 15 | #define flush_dcache_page(page) do { } while (0) | ||
| 16 | #define flush_dcache_mmap_lock(mapping) do { } while (0) | ||
| 17 | #define flush_dcache_mmap_unlock(mapping) do { } while (0) | ||
| 18 | #define flush_icache_range(start,len) __flush_cache_all() | ||
| 19 | #define flush_icache_page(vma,pg) do { } while (0) | ||
| 20 | #define flush_icache_user_range(vma,pg,adr,len) do { } while (0) | ||
| 21 | #define flush_cache_vmap(start, end) do { } while (0) | ||
| 22 | #define flush_cache_vunmap(start, end) do { } while (0) | ||
| 23 | |||
| 24 | #define copy_to_user_page(vma, page, vaddr, dst, src, len) \ | ||
| 25 | memcpy(dst, src, len) | ||
| 26 | #define copy_from_user_page(vma, page, vaddr, dst, src, len) \ | ||
| 27 | memcpy(dst, src, len) | ||
| 28 | |||
| 29 | static inline void __flush_cache_all(void) | ||
| 30 | { | ||
| 31 | #ifdef CONFIG_M5407 | ||
| 32 | /* | ||
| 33 | * Use cpushl to push and invalidate all cache lines. | ||
| 34 | * Gas doesn't seem to know how to generate the ColdFire | ||
| 35 | * cpushl instruction... Oh well, bit stuff it for now. | ||
| 36 | */ | ||
| 37 | __asm__ __volatile__ ( | ||
| 38 | "nop\n\t" | ||
| 39 | "clrl %%d0\n\t" | ||
| 40 | "1:\n\t" | ||
| 41 | "movel %%d0,%%a0\n\t" | ||
| 42 | "2:\n\t" | ||
| 43 | ".word 0xf468\n\t" | ||
| 44 | "addl #0x10,%%a0\n\t" | ||
| 45 | "cmpl #0x00000800,%%a0\n\t" | ||
| 46 | "blt 2b\n\t" | ||
| 47 | "addql #1,%%d0\n\t" | ||
| 48 | "cmpil #4,%%d0\n\t" | ||
| 49 | "bne 1b\n\t" | ||
| 50 | "movel #0xb6088500,%%d0\n\t" | ||
| 51 | "movec %%d0,%%CACR\n\t" | ||
| 52 | : : : "d0", "a0" ); | ||
| 53 | #endif /* CONFIG_M5407 */ | ||
| 54 | #if defined(CONFIG_M527x) || defined(CONFIG_M528x) | ||
| 55 | __asm__ __volatile__ ( | ||
| 56 | "movel #0x81000200, %%d0\n\t" | ||
| 57 | "movec %%d0, %%CACR\n\t" | ||
| 58 | "nop\n\t" | ||
| 59 | : : : "d0" ); | ||
| 60 | #endif /* CONFIG_M527x || CONFIG_M528x */ | ||
| 61 | #if defined(CONFIG_M5206) || defined(CONFIG_M5206e) || defined(CONFIG_M5272) | ||
| 62 | __asm__ __volatile__ ( | ||
| 63 | "movel #0x81000100, %%d0\n\t" | ||
| 64 | "movec %%d0, %%CACR\n\t" | ||
| 65 | "nop\n\t" | ||
| 66 | : : : "d0" ); | ||
| 67 | #endif /* CONFIG_M5206 || CONFIG_M5206e || CONFIG_M5272 */ | ||
| 68 | #ifdef CONFIG_M5249 | ||
| 69 | __asm__ __volatile__ ( | ||
| 70 | "movel #0xa1000200, %%d0\n\t" | ||
| 71 | "movec %%d0, %%CACR\n\t" | ||
| 72 | "nop\n\t" | ||
| 73 | : : : "d0" ); | ||
| 74 | #endif /* CONFIG_M5249 */ | ||
| 75 | #ifdef CONFIG_M532x | ||
| 76 | __asm__ __volatile__ ( | ||
| 77 | "movel #0x81000200, %%d0\n\t" | ||
| 78 | "movec %%d0, %%CACR\n\t" | ||
| 79 | "nop\n\t" | ||
| 80 | : : : "d0" ); | ||
| 81 | #endif /* CONFIG_M532x */ | ||
| 82 | } | ||
| 83 | |||
| 84 | #endif /* _M68KNOMMU_CACHEFLUSH_H */ | ||
diff --git a/arch/m68knommu/include/asm/checksum.h b/arch/m68knommu/include/asm/checksum.h deleted file mode 100644 index 81883482ffb1..000000000000 --- a/arch/m68knommu/include/asm/checksum.h +++ /dev/null | |||
| @@ -1,132 +0,0 @@ | |||
| 1 | #ifndef _M68K_CHECKSUM_H | ||
| 2 | #define _M68K_CHECKSUM_H | ||
| 3 | |||
| 4 | #include <linux/in6.h> | ||
| 5 | |||
| 6 | /* | ||
| 7 | * computes the checksum of a memory block at buff, length len, | ||
| 8 | * and adds in "sum" (32-bit) | ||
| 9 | * | ||
| 10 | * returns a 32-bit number suitable for feeding into itself | ||
| 11 | * or csum_tcpudp_magic | ||
| 12 | * | ||
| 13 | * this function must be called with even lengths, except | ||
| 14 | * for the last fragment, which may be odd | ||
| 15 | * | ||
| 16 | * it's best to have buff aligned on a 32-bit boundary | ||
| 17 | */ | ||
| 18 | __wsum csum_partial(const void *buff, int len, __wsum sum); | ||
| 19 | |||
| 20 | /* | ||
| 21 | * the same as csum_partial, but copies from src while it | ||
| 22 | * checksums | ||
| 23 | * | ||
| 24 | * here even more important to align src and dst on a 32-bit (or even | ||
| 25 | * better 64-bit) boundary | ||
| 26 | */ | ||
| 27 | |||
| 28 | __wsum csum_partial_copy_nocheck(const void *src, void *dst, | ||
| 29 | int len, __wsum sum); | ||
| 30 | |||
| 31 | |||
| 32 | /* | ||
| 33 | * the same as csum_partial_copy, but copies from user space. | ||
| 34 | * | ||
| 35 | * here even more important to align src and dst on a 32-bit (or even | ||
| 36 | * better 64-bit) boundary | ||
| 37 | */ | ||
| 38 | |||
| 39 | extern __wsum csum_partial_copy_from_user(const void __user *src, | ||
| 40 | void *dst, int len, __wsum sum, int *csum_err); | ||
| 41 | |||
| 42 | __sum16 ip_fast_csum(const void *iph, unsigned int ihl); | ||
| 43 | |||
| 44 | /* | ||
| 45 | * Fold a partial checksum | ||
| 46 | */ | ||
| 47 | |||
| 48 | static inline __sum16 csum_fold(__wsum sum) | ||
| 49 | { | ||
| 50 | unsigned int tmp = (__force u32)sum; | ||
| 51 | #ifdef CONFIG_COLDFIRE | ||
| 52 | tmp = (tmp & 0xffff) + (tmp >> 16); | ||
| 53 | tmp = (tmp & 0xffff) + (tmp >> 16); | ||
| 54 | return (__force __sum16)~tmp; | ||
| 55 | #else | ||
| 56 | __asm__("swap %1\n\t" | ||
| 57 | "addw %1, %0\n\t" | ||
| 58 | "clrw %1\n\t" | ||
| 59 | "addxw %1, %0" | ||
| 60 | : "=&d" (sum), "=&d" (tmp) | ||
| 61 | : "0" (sum), "1" (sum)); | ||
| 62 | return (__force __sum16)~sum; | ||
| 63 | #endif | ||
| 64 | } | ||
| 65 | |||
| 66 | |||
| 67 | /* | ||
| 68 | * computes the checksum of the TCP/UDP pseudo-header | ||
| 69 | * returns a 16-bit checksum, already complemented | ||
| 70 | */ | ||
| 71 | |||
| 72 | static inline __wsum | ||
| 73 | csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len, | ||
| 74 | unsigned short proto, __wsum sum) | ||
| 75 | { | ||
| 76 | __asm__ ("addl %1,%0\n\t" | ||
| 77 | "addxl %4,%0\n\t" | ||
| 78 | "addxl %5,%0\n\t" | ||
| 79 | "clrl %1\n\t" | ||
| 80 | "addxl %1,%0" | ||
| 81 | : "=&d" (sum), "=&d" (saddr) | ||
| 82 | : "0" (daddr), "1" (saddr), "d" (len + proto), | ||
| 83 | "d"(sum)); | ||
| 84 | return sum; | ||
| 85 | } | ||
| 86 | |||
| 87 | static inline __sum16 | ||
| 88 | csum_tcpudp_magic(__be32 saddr, __be32 daddr, unsigned short len, | ||
| 89 | unsigned short proto, __wsum sum) | ||
| 90 | { | ||
| 91 | return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum)); | ||
| 92 | } | ||
| 93 | |||
| 94 | /* | ||
| 95 | * this routine is used for miscellaneous IP-like checksums, mainly | ||
| 96 | * in icmp.c | ||
| 97 | */ | ||
| 98 | |||
| 99 | extern __sum16 ip_compute_csum(const void *buff, int len); | ||
| 100 | |||
| 101 | #define _HAVE_ARCH_IPV6_CSUM | ||
| 102 | static __inline__ __sum16 | ||
| 103 | csum_ipv6_magic(const struct in6_addr *saddr, const struct in6_addr *daddr, | ||
| 104 | __u32 len, unsigned short proto, __wsum sum) | ||
| 105 | { | ||
| 106 | register unsigned long tmp; | ||
| 107 | __asm__("addl %2@,%0\n\t" | ||
| 108 | "movel %2@(4),%1\n\t" | ||
| 109 | "addxl %1,%0\n\t" | ||
| 110 | "movel %2@(8),%1\n\t" | ||
| 111 | "addxl %1,%0\n\t" | ||
| 112 | "movel %2@(12),%1\n\t" | ||
| 113 | "addxl %1,%0\n\t" | ||
| 114 | "movel %3@,%1\n\t" | ||
| 115 | "addxl %1,%0\n\t" | ||
| 116 | "movel %3@(4),%1\n\t" | ||
| 117 | "addxl %1,%0\n\t" | ||
| 118 | "movel %3@(8),%1\n\t" | ||
| 119 | "addxl %1,%0\n\t" | ||
| 120 | "movel %3@(12),%1\n\t" | ||
| 121 | "addxl %1,%0\n\t" | ||
| 122 | "addxl %4,%0\n\t" | ||
| 123 | "clrl %1\n\t" | ||
| 124 | "addxl %1,%0" | ||
| 125 | : "=&d" (sum), "=&d" (tmp) | ||
| 126 | : "a" (saddr), "a" (daddr), "d" (len + proto), | ||
| 127 | "0" (sum)); | ||
| 128 | |||
| 129 | return csum_fold(sum); | ||
| 130 | } | ||
| 131 | |||
| 132 | #endif /* _M68K_CHECKSUM_H */ | ||
diff --git a/arch/m68knommu/include/asm/coldfire.h b/arch/m68knommu/include/asm/coldfire.h deleted file mode 100644 index 83a9fa4e618a..000000000000 --- a/arch/m68knommu/include/asm/coldfire.h +++ /dev/null | |||
| @@ -1,51 +0,0 @@ | |||
| 1 | /****************************************************************************/ | ||
| 2 | |||
| 3 | /* | ||
| 4 | * coldfire.h -- Motorola ColdFire CPU sepecific defines | ||
| 5 | * | ||
| 6 | * (C) Copyright 1999-2006, Greg Ungerer (gerg@snapgear.com) | ||
| 7 | * (C) Copyright 2000, Lineo (www.lineo.com) | ||
| 8 | */ | ||
| 9 | |||
| 10 | /****************************************************************************/ | ||
| 11 | #ifndef coldfire_h | ||
| 12 | #define coldfire_h | ||
| 13 | /****************************************************************************/ | ||
| 14 | |||
| 15 | |||
| 16 | /* | ||
| 17 | * Define master clock frequency. This is essentially done at config | ||
| 18 | * time now. No point enumerating dozens of possible clock options | ||
| 19 | * here. Also the peripheral clock (bus clock) divide ratio is set | ||
| 20 | * at config time too. | ||
| 21 | */ | ||
| 22 | #ifdef CONFIG_CLOCK_SET | ||
| 23 | #define MCF_CLK CONFIG_CLOCK_FREQ | ||
| 24 | #define MCF_BUSCLK (CONFIG_CLOCK_FREQ / CONFIG_CLOCK_DIV) | ||
| 25 | #else | ||
| 26 | #error "Don't know what your ColdFire CPU clock frequency is??" | ||
| 27 | #endif | ||
| 28 | |||
| 29 | /* | ||
| 30 | * Define the processor support peripherals base address. | ||
| 31 | * This is generally setup by the boards start up code. | ||
| 32 | */ | ||
| 33 | #define MCF_MBAR 0x10000000 | ||
| 34 | #define MCF_MBAR2 0x80000000 | ||
| 35 | #if defined(CONFIG_M520x) | ||
| 36 | #define MCF_IPSBAR 0xFC000000 | ||
| 37 | #else | ||
| 38 | #define MCF_IPSBAR 0x40000000 | ||
| 39 | #endif | ||
| 40 | |||
| 41 | #if defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x) || \ | ||
| 42 | defined(CONFIG_M520x) | ||
| 43 | #undef MCF_MBAR | ||
| 44 | #define MCF_MBAR MCF_IPSBAR | ||
| 45 | #elif defined(CONFIG_M532x) | ||
| 46 | #undef MCF_MBAR | ||
| 47 | #define MCF_MBAR 0x00000000 | ||
| 48 | #endif | ||
| 49 | |||
| 50 | /****************************************************************************/ | ||
| 51 | #endif /* coldfire_h */ | ||
diff --git a/arch/m68knommu/include/asm/commproc.h b/arch/m68knommu/include/asm/commproc.h deleted file mode 100644 index edf5eb6c08d2..000000000000 --- a/arch/m68knommu/include/asm/commproc.h +++ /dev/null | |||
| @@ -1,703 +0,0 @@ | |||
| 1 | |||
| 2 | /* | ||
| 3 | * 68360 Communication Processor Module. | ||
| 4 | * Copyright (c) 2000 Michael Leslie <mleslie@lineo.com> (mc68360) after: | ||
| 5 | * Copyright (c) 1997 Dan Malek <dmalek@jlc.net> (mpc8xx) | ||
| 6 | * | ||
| 7 | * This file contains structures and information for the communication | ||
| 8 | * processor channels. Some CPM control and status is available | ||
| 9 | * through the 68360 internal memory map. See include/asm/360_immap.h for details. | ||
| 10 | * This file is not a complete map of all of the 360 QUICC's capabilities | ||
| 11 | * | ||
| 12 | * On the MBX board, EPPC-Bug loads CPM microcode into the first 512 | ||
| 13 | * bytes of the DP RAM and relocates the I2C parameter area to the | ||
| 14 | * IDMA1 space. The remaining DP RAM is available for buffer descriptors | ||
| 15 | * or other use. | ||
| 16 | */ | ||
| 17 | #ifndef __CPM_360__ | ||
| 18 | #define __CPM_360__ | ||
| 19 | |||
| 20 | |||
| 21 | /* CPM Command register masks: */ | ||
| 22 | #define CPM_CR_RST ((ushort)0x8000) | ||
| 23 | #define CPM_CR_OPCODE ((ushort)0x0f00) | ||
| 24 | #define CPM_CR_CHAN ((ushort)0x00f0) | ||
| 25 | #define CPM_CR_FLG ((ushort)0x0001) | ||
| 26 | |||
| 27 | /* CPM Command set (opcodes): */ | ||
| 28 | #define CPM_CR_INIT_TRX ((ushort)0x0000) | ||
| 29 | #define CPM_CR_INIT_RX ((ushort)0x0001) | ||
| 30 | #define CPM_CR_INIT_TX ((ushort)0x0002) | ||
| 31 | #define CPM_CR_HUNT_MODE ((ushort)0x0003) | ||
| 32 | #define CPM_CR_STOP_TX ((ushort)0x0004) | ||
| 33 | #define CPM_CR_GRSTOP_TX ((ushort)0x0005) | ||
| 34 | #define CPM_CR_RESTART_TX ((ushort)0x0006) | ||
| 35 | #define CPM_CR_CLOSE_RXBD ((ushort)0x0007) | ||
| 36 | #define CPM_CR_SET_GADDR ((ushort)0x0008) | ||
| 37 | #define CPM_CR_GCI_TIMEOUT ((ushort)0x0009) | ||
| 38 | #define CPM_CR_GCI_ABORT ((ushort)0x000a) | ||
| 39 | #define CPM_CR_RESET_BCS ((ushort)0x000a) | ||
| 40 | |||
| 41 | /* CPM Channel numbers. */ | ||
| 42 | #define CPM_CR_CH_SCC1 ((ushort)0x0000) | ||
| 43 | #define CPM_CR_CH_SCC2 ((ushort)0x0004) | ||
| 44 | #define CPM_CR_CH_SPI ((ushort)0x0005) /* SPI / Timers */ | ||
| 45 | #define CPM_CR_CH_TMR ((ushort)0x0005) | ||
| 46 | #define CPM_CR_CH_SCC3 ((ushort)0x0008) | ||
| 47 | #define CPM_CR_CH_SMC1 ((ushort)0x0009) /* SMC1 / IDMA1 */ | ||
| 48 | #define CPM_CR_CH_IDMA1 ((ushort)0x0009) | ||
| 49 | #define CPM_CR_CH_SCC4 ((ushort)0x000c) | ||
| 50 | #define CPM_CR_CH_SMC2 ((ushort)0x000d) /* SMC2 / IDMA2 */ | ||
| 51 | #define CPM_CR_CH_IDMA2 ((ushort)0x000d) | ||
| 52 | |||
| 53 | |||
| 54 | #define mk_cr_cmd(CH, CMD) ((CMD << 8) | (CH << 4)) | ||
| 55 | |||
| 56 | #if 1 /* mleslie: I dinna think we have any such restrictions on | ||
| 57 | * DP RAM aboard the 360 board - see the MC68360UM p.3-3 */ | ||
| 58 | |||
| 59 | /* The dual ported RAM is multi-functional. Some areas can be (and are | ||
| 60 | * being) used for microcode. There is an area that can only be used | ||
| 61 | * as data ram for buffer descriptors, which is all we use right now. | ||
| 62 | * Currently the first 512 and last 256 bytes are used for microcode. | ||
| 63 | */ | ||
| 64 | /* mleslie: The uCquicc board is using no extra microcode in DPRAM */ | ||
| 65 | #define CPM_DATAONLY_BASE ((uint)0x0000) | ||
| 66 | #define CPM_DATAONLY_SIZE ((uint)0x0800) | ||
| 67 | #define CPM_DP_NOSPACE ((uint)0x7fffffff) | ||
| 68 | |||
| 69 | #endif | ||
| 70 | |||
| 71 | |||
| 72 | /* Export the base address of the communication processor registers | ||
| 73 | * and dual port ram. */ | ||
| 74 | /* extern cpm360_t *cpmp; */ /* Pointer to comm processor */ | ||
| 75 | extern QUICC *pquicc; | ||
| 76 | uint m360_cpm_dpalloc(uint size); | ||
| 77 | /* void *m360_cpm_hostalloc(uint size); */ | ||
| 78 | void m360_cpm_setbrg(uint brg, uint rate); | ||
| 79 | |||
| 80 | #if 0 /* use QUICC_BD declared in include/asm/m68360_quicc.h */ | ||
| 81 | /* Buffer descriptors used by many of the CPM protocols. */ | ||
| 82 | typedef struct cpm_buf_desc { | ||
| 83 | ushort cbd_sc; /* Status and Control */ | ||
| 84 | ushort cbd_datlen; /* Data length in buffer */ | ||
| 85 | uint cbd_bufaddr; /* Buffer address in host memory */ | ||
| 86 | } cbd_t; | ||
| 87 | #endif | ||
| 88 | |||
| 89 | |||
| 90 | /* rx bd status/control bits */ | ||
| 91 | #define BD_SC_EMPTY ((ushort)0x8000) /* Recieve is empty */ | ||
| 92 | #define BD_SC_WRAP ((ushort)0x2000) /* Last buffer descriptor in table */ | ||
| 93 | #define BD_SC_INTRPT ((ushort)0x1000) /* Interrupt on change */ | ||
| 94 | #define BD_SC_LAST ((ushort)0x0800) /* Last buffer in frame OR control char */ | ||
| 95 | |||
| 96 | #define BD_SC_FIRST ((ushort)0x0400) /* 1st buffer in an HDLC frame */ | ||
| 97 | #define BD_SC_ADDR ((ushort)0x0400) /* 1st byte is a multidrop address */ | ||
| 98 | |||
| 99 | #define BD_SC_CM ((ushort)0x0200) /* Continous mode */ | ||
| 100 | #define BD_SC_ID ((ushort)0x0100) /* Received too many idles */ | ||
| 101 | |||
| 102 | #define BD_SC_AM ((ushort)0x0080) /* Multidrop address match */ | ||
| 103 | #define BD_SC_DE ((ushort)0x0080) /* DPLL Error (HDLC) */ | ||
| 104 | |||
| 105 | #define BD_SC_BR ((ushort)0x0020) /* Break received */ | ||
| 106 | #define BD_SC_LG ((ushort)0x0020) /* Frame length violation (HDLC) */ | ||
| 107 | |||
| 108 | #define BD_SC_FR ((ushort)0x0010) /* Framing error */ | ||
| 109 | #define BD_SC_NO ((ushort)0x0010) /* Nonoctet aligned frame (HDLC) */ | ||
| 110 | |||
| 111 | #define BD_SC_PR ((ushort)0x0008) /* Parity error */ | ||
| 112 | #define BD_SC_AB ((ushort)0x0008) /* Received abort Sequence (HDLC) */ | ||
| 113 | |||
| 114 | #define BD_SC_OV ((ushort)0x0002) /* Overrun */ | ||
| 115 | #define BD_SC_CD ((ushort)0x0001) /* Carrier Detect lost */ | ||
| 116 | |||
| 117 | /* tx bd status/control bits (as differ from rx bd) */ | ||
| 118 | #define BD_SC_READY ((ushort)0x8000) /* Transmit is ready */ | ||
| 119 | #define BD_SC_TC ((ushort)0x0400) /* Transmit CRC */ | ||
| 120 | #define BD_SC_P ((ushort)0x0100) /* xmt preamble */ | ||
| 121 | #define BD_SC_UN ((ushort)0x0002) /* Underrun */ | ||
| 122 | |||
| 123 | |||
| 124 | |||
| 125 | |||
| 126 | /* Parameter RAM offsets. */ | ||
| 127 | |||
| 128 | |||
| 129 | |||
| 130 | /* In 2.4 ppc, the PROFF_S?C? are used as byte offsets into DPRAM. | ||
| 131 | * In 2.0, we use a more structured C struct map of DPRAM, and so | ||
| 132 | * instead, we need only a parameter ram `slot' */ | ||
| 133 | |||
| 134 | #define PRSLOT_SCC1 0 | ||
| 135 | #define PRSLOT_SCC2 1 | ||
| 136 | #define PRSLOT_SCC3 2 | ||
| 137 | #define PRSLOT_SMC1 2 | ||
| 138 | #define PRSLOT_SCC4 3 | ||
| 139 | #define PRSLOT_SMC2 3 | ||
| 140 | |||
| 141 | |||
| 142 | /* #define PROFF_SCC1 ((uint)0x0000) */ | ||
| 143 | /* #define PROFF_SCC2 ((uint)0x0100) */ | ||
| 144 | /* #define PROFF_SCC3 ((uint)0x0200) */ | ||
| 145 | /* #define PROFF_SMC1 ((uint)0x0280) */ | ||
| 146 | /* #define PROFF_SCC4 ((uint)0x0300) */ | ||
| 147 | /* #define PROFF_SMC2 ((uint)0x0380) */ | ||
| 148 | |||
| 149 | |||
| 150 | /* Define enough so I can at least use the serial port as a UART. | ||
| 151 | * The MBX uses SMC1 as the host serial port. | ||
| 152 | */ | ||
| 153 | typedef struct smc_uart { | ||
| 154 | ushort smc_rbase; /* Rx Buffer descriptor base address */ | ||
| 155 | ushort smc_tbase; /* Tx Buffer descriptor base address */ | ||
| 156 | u_char smc_rfcr; /* Rx function code */ | ||
| 157 | u_char smc_tfcr; /* Tx function code */ | ||
| 158 | ushort smc_mrblr; /* Max receive buffer length */ | ||
| 159 | uint smc_rstate; /* Internal */ | ||
| 160 | uint smc_idp; /* Internal */ | ||
| 161 | ushort smc_rbptr; /* Internal */ | ||
| 162 | ushort smc_ibc; /* Internal */ | ||
| 163 | uint smc_rxtmp; /* Internal */ | ||
| 164 | uint smc_tstate; /* Internal */ | ||
| 165 | uint smc_tdp; /* Internal */ | ||
| 166 | ushort smc_tbptr; /* Internal */ | ||
| 167 | ushort smc_tbc; /* Internal */ | ||
| 168 | uint smc_txtmp; /* Internal */ | ||
| 169 | ushort smc_maxidl; /* Maximum idle characters */ | ||
| 170 | ushort smc_tmpidl; /* Temporary idle counter */ | ||
| 171 | ushort smc_brklen; /* Last received break length */ | ||
| 172 | ushort smc_brkec; /* rcv'd break condition counter */ | ||
| 173 | ushort smc_brkcr; /* xmt break count register */ | ||
| 174 | ushort smc_rmask; /* Temporary bit mask */ | ||
| 175 | } smc_uart_t; | ||
| 176 | |||
| 177 | /* Function code bits. | ||
| 178 | */ | ||
| 179 | #define SMC_EB ((u_char)0x10) /* Set big endian byte order */ | ||
| 180 | |||
| 181 | /* SMC uart mode register. | ||
| 182 | */ | ||
| 183 | #define SMCMR_REN ((ushort)0x0001) | ||
| 184 | #define SMCMR_TEN ((ushort)0x0002) | ||
| 185 | #define SMCMR_DM ((ushort)0x000c) | ||
| 186 | #define SMCMR_SM_GCI ((ushort)0x0000) | ||
| 187 | #define SMCMR_SM_UART ((ushort)0x0020) | ||
| 188 | #define SMCMR_SM_TRANS ((ushort)0x0030) | ||
| 189 | #define SMCMR_SM_MASK ((ushort)0x0030) | ||
| 190 | #define SMCMR_PM_EVEN ((ushort)0x0100) /* Even parity, else odd */ | ||
| 191 | #define SMCMR_REVD SMCMR_PM_EVEN | ||
| 192 | #define SMCMR_PEN ((ushort)0x0200) /* Parity enable */ | ||
| 193 | #define SMCMR_BS SMCMR_PEN | ||
| 194 | #define SMCMR_SL ((ushort)0x0400) /* Two stops, else one */ | ||
| 195 | #define SMCR_CLEN_MASK ((ushort)0x7800) /* Character length */ | ||
| 196 | #define smcr_mk_clen(C) (((C) << 11) & SMCR_CLEN_MASK) | ||
| 197 | |||
| 198 | /* SMC2 as Centronics parallel printer. It is half duplex, in that | ||
| 199 | * it can only receive or transmit. The parameter ram values for | ||
| 200 | * each direction are either unique or properly overlap, so we can | ||
| 201 | * include them in one structure. | ||
| 202 | */ | ||
| 203 | typedef struct smc_centronics { | ||
| 204 | ushort scent_rbase; | ||
| 205 | ushort scent_tbase; | ||
| 206 | u_char scent_cfcr; | ||
| 207 | u_char scent_smask; | ||
| 208 | ushort scent_mrblr; | ||
| 209 | uint scent_rstate; | ||
| 210 | uint scent_r_ptr; | ||
| 211 | ushort scent_rbptr; | ||
| 212 | ushort scent_r_cnt; | ||
| 213 | uint scent_rtemp; | ||
| 214 | uint scent_tstate; | ||
| 215 | uint scent_t_ptr; | ||
| 216 | ushort scent_tbptr; | ||
| 217 | ushort scent_t_cnt; | ||
| 218 | uint scent_ttemp; | ||
| 219 | ushort scent_max_sl; | ||
| 220 | ushort scent_sl_cnt; | ||
| 221 | ushort scent_character1; | ||
| 222 | ushort scent_character2; | ||
| 223 | ushort scent_character3; | ||
| 224 | ushort scent_character4; | ||
| 225 | ushort scent_character5; | ||
| 226 | ushort scent_character6; | ||
| 227 | ushort scent_character7; | ||
| 228 | ushort scent_character8; | ||
| 229 | ushort scent_rccm; | ||
| 230 | ushort scent_rccr; | ||
| 231 | } smc_cent_t; | ||
| 232 | |||
| 233 | /* Centronics Status Mask Register. | ||
| 234 | */ | ||
| 235 | #define SMC_CENT_F ((u_char)0x08) | ||
| 236 | #define SMC_CENT_PE ((u_char)0x04) | ||
| 237 | #define SMC_CENT_S ((u_char)0x02) | ||
| 238 | |||
| 239 | /* SMC Event and Mask register. | ||
| 240 | */ | ||
| 241 | #define SMCM_BRKE ((unsigned char)0x40) /* When in UART Mode */ | ||
| 242 | #define SMCM_BRK ((unsigned char)0x10) /* When in UART Mode */ | ||
| 243 | #define SMCM_TXE ((unsigned char)0x10) /* When in Transparent Mode */ | ||
| 244 | #define SMCM_BSY ((unsigned char)0x04) | ||
| 245 | #define SMCM_TX ((unsigned char)0x02) | ||
| 246 | #define SMCM_RX ((unsigned char)0x01) | ||
| 247 | |||
| 248 | /* Baud rate generators. | ||
| 249 | */ | ||
| 250 | #define CPM_BRG_RST ((uint)0x00020000) | ||
| 251 | #define CPM_BRG_EN ((uint)0x00010000) | ||
| 252 | #define CPM_BRG_EXTC_INT ((uint)0x00000000) | ||
| 253 | #define CPM_BRG_EXTC_CLK2 ((uint)0x00004000) | ||
| 254 | #define CPM_BRG_EXTC_CLK6 ((uint)0x00008000) | ||
| 255 | #define CPM_BRG_ATB ((uint)0x00002000) | ||
| 256 | #define CPM_BRG_CD_MASK ((uint)0x00001ffe) | ||
| 257 | #define CPM_BRG_DIV16 ((uint)0x00000001) | ||
| 258 | |||
| 259 | /* SCCs. | ||
| 260 | */ | ||
| 261 | #define SCC_GSMRH_IRP ((uint)0x00040000) | ||
| 262 | #define SCC_GSMRH_GDE ((uint)0x00010000) | ||
| 263 | #define SCC_GSMRH_TCRC_CCITT ((uint)0x00008000) | ||
| 264 | #define SCC_GSMRH_TCRC_BISYNC ((uint)0x00004000) | ||
| 265 | #define SCC_GSMRH_TCRC_HDLC ((uint)0x00000000) | ||
| 266 | #define SCC_GSMRH_REVD ((uint)0x00002000) | ||
| 267 | #define SCC_GSMRH_TRX ((uint)0x00001000) | ||
| 268 | #define SCC_GSMRH_TTX ((uint)0x00000800) | ||
| 269 | #define SCC_GSMRH_CDP ((uint)0x00000400) | ||
| 270 | #define SCC_GSMRH_CTSP ((uint)0x00000200) | ||
| 271 | #define SCC_GSMRH_CDS ((uint)0x00000100) | ||
| 272 | #define SCC_GSMRH_CTSS ((uint)0x00000080) | ||
| 273 | #define SCC_GSMRH_TFL ((uint)0x00000040) | ||
| 274 | #define SCC_GSMRH_RFW ((uint)0x00000020) | ||
| 275 | #define SCC_GSMRH_TXSY ((uint)0x00000010) | ||
| 276 | #define SCC_GSMRH_SYNL16 ((uint)0x0000000c) | ||
| 277 | #define SCC_GSMRH_SYNL8 ((uint)0x00000008) | ||
| 278 | #define SCC_GSMRH_SYNL4 ((uint)0x00000004) | ||
| 279 | #define SCC_GSMRH_RTSM ((uint)0x00000002) | ||
| 280 | #define SCC_GSMRH_RSYN ((uint)0x00000001) | ||
| 281 | |||
| 282 | #define SCC_GSMRL_SIR ((uint)0x80000000) /* SCC2 only */ | ||
| 283 | #define SCC_GSMRL_EDGE_NONE ((uint)0x60000000) | ||
| 284 | #define SCC_GSMRL_EDGE_NEG ((uint)0x40000000) | ||
| 285 | #define SCC_GSMRL_EDGE_POS ((uint)0x20000000) | ||
| 286 | #define SCC_GSMRL_EDGE_BOTH ((uint)0x00000000) | ||
| 287 | #define SCC_GSMRL_TCI ((uint)0x10000000) | ||
| 288 | #define SCC_GSMRL_TSNC_3 ((uint)0x0c000000) | ||
| 289 | #define SCC_GSMRL_TSNC_4 ((uint)0x08000000) | ||
| 290 | #define SCC_GSMRL_TSNC_14 ((uint)0x04000000) | ||
| 291 | #define SCC_GSMRL_TSNC_INF ((uint)0x00000000) | ||
| 292 | #define SCC_GSMRL_RINV ((uint)0x02000000) | ||
| 293 | #define SCC_GSMRL_TINV ((uint)0x01000000) | ||
| 294 | #define SCC_GSMRL_TPL_128 ((uint)0x00c00000) | ||
| 295 | #define SCC_GSMRL_TPL_64 ((uint)0x00a00000) | ||
| 296 | #define SCC_GSMRL_TPL_48 ((uint)0x00800000) | ||
| 297 | #define SCC_GSMRL_TPL_32 ((uint)0x00600000) | ||
| 298 | #define SCC_GSMRL_TPL_16 ((uint)0x00400000) | ||
| 299 | #define SCC_GSMRL_TPL_8 ((uint)0x00200000) | ||
| 300 | #define SCC_GSMRL_TPL_NONE ((uint)0x00000000) | ||
| 301 | #define SCC_GSMRL_TPP_ALL1 ((uint)0x00180000) | ||
| 302 | #define SCC_GSMRL_TPP_01 ((uint)0x00100000) | ||
| 303 | #define SCC_GSMRL_TPP_10 ((uint)0x00080000) | ||
| 304 | #define SCC_GSMRL_TPP_ZEROS ((uint)0x00000000) | ||
| 305 | #define SCC_GSMRL_TEND ((uint)0x00040000) | ||
| 306 | #define SCC_GSMRL_TDCR_32 ((uint)0x00030000) | ||
| 307 | #define SCC_GSMRL_TDCR_16 ((uint)0x00020000) | ||
| 308 | #define SCC_GSMRL_TDCR_8 ((uint)0x00010000) | ||
| 309 | #define SCC_GSMRL_TDCR_1 ((uint)0x00000000) | ||
| 310 | #define SCC_GSMRL_RDCR_32 ((uint)0x0000c000) | ||
| 311 | #define SCC_GSMRL_RDCR_16 ((uint)0x00008000) | ||
| 312 | #define SCC_GSMRL_RDCR_8 ((uint)0x00004000) | ||
| 313 | #define SCC_GSMRL_RDCR_1 ((uint)0x00000000) | ||
| 314 | #define SCC_GSMRL_RENC_DFMAN ((uint)0x00003000) | ||
| 315 | #define SCC_GSMRL_RENC_MANCH ((uint)0x00002000) | ||
| 316 | #define SCC_GSMRL_RENC_FM0 ((uint)0x00001000) | ||
| 317 | #define SCC_GSMRL_RENC_NRZI ((uint)0x00000800) | ||
| 318 | #define SCC_GSMRL_RENC_NRZ ((uint)0x00000000) | ||
| 319 | #define SCC_GSMRL_TENC_DFMAN ((uint)0x00000600) | ||
| 320 | #define SCC_GSMRL_TENC_MANCH ((uint)0x00000400) | ||
| 321 | #define SCC_GSMRL_TENC_FM0 ((uint)0x00000200) | ||
| 322 | #define SCC_GSMRL_TENC_NRZI ((uint)0x00000100) | ||
| 323 | #define SCC_GSMRL_TENC_NRZ ((uint)0x00000000) | ||
| 324 | #define SCC_GSMRL_DIAG_LE ((uint)0x000000c0) /* Loop and echo */ | ||
| 325 | #define SCC_GSMRL_DIAG_ECHO ((uint)0x00000080) | ||
| 326 | #define SCC_GSMRL_DIAG_LOOP ((uint)0x00000040) | ||
| 327 | #define SCC_GSMRL_DIAG_NORM ((uint)0x00000000) | ||
| 328 | #define SCC_GSMRL_ENR ((uint)0x00000020) | ||
| 329 | #define SCC_GSMRL_ENT ((uint)0x00000010) | ||
| 330 | #define SCC_GSMRL_MODE_ENET ((uint)0x0000000c) | ||
| 331 | #define SCC_GSMRL_MODE_DDCMP ((uint)0x00000009) | ||
| 332 | #define SCC_GSMRL_MODE_BISYNC ((uint)0x00000008) | ||
| 333 | #define SCC_GSMRL_MODE_V14 ((uint)0x00000007) | ||
| 334 | #define SCC_GSMRL_MODE_AHDLC ((uint)0x00000006) | ||
| 335 | #define SCC_GSMRL_MODE_PROFIBUS ((uint)0x00000005) | ||
| 336 | #define SCC_GSMRL_MODE_UART ((uint)0x00000004) | ||
| 337 | #define SCC_GSMRL_MODE_SS7 ((uint)0x00000003) | ||
| 338 | #define SCC_GSMRL_MODE_ATALK ((uint)0x00000002) | ||
| 339 | #define SCC_GSMRL_MODE_HDLC ((uint)0x00000000) | ||
| 340 | |||
| 341 | #define SCC_TODR_TOD ((ushort)0x8000) | ||
| 342 | |||
| 343 | /* SCC Event and Mask register. | ||
| 344 | */ | ||
| 345 | #define SCCM_TXE ((unsigned char)0x10) | ||
| 346 | #define SCCM_BSY ((unsigned char)0x04) | ||
| 347 | #define SCCM_TX ((unsigned char)0x02) | ||
| 348 | #define SCCM_RX ((unsigned char)0x01) | ||
| 349 | |||
| 350 | typedef struct scc_param { | ||
| 351 | ushort scc_rbase; /* Rx Buffer descriptor base address */ | ||
| 352 | ushort scc_tbase; /* Tx Buffer descriptor base address */ | ||
| 353 | u_char scc_rfcr; /* Rx function code */ | ||
| 354 | u_char scc_tfcr; /* Tx function code */ | ||
| 355 | ushort scc_mrblr; /* Max receive buffer length */ | ||
| 356 | uint scc_rstate; /* Internal */ | ||
| 357 | uint scc_idp; /* Internal */ | ||
| 358 | ushort scc_rbptr; /* Internal */ | ||
| 359 | ushort scc_ibc; /* Internal */ | ||
| 360 | uint scc_rxtmp; /* Internal */ | ||
| 361 | uint scc_tstate; /* Internal */ | ||
| 362 | uint scc_tdp; /* Internal */ | ||
| 363 | ushort scc_tbptr; /* Internal */ | ||
| 364 | ushort scc_tbc; /* Internal */ | ||
| 365 | uint scc_txtmp; /* Internal */ | ||
| 366 | uint scc_rcrc; /* Internal */ | ||
| 367 | uint scc_tcrc; /* Internal */ | ||
| 368 | } sccp_t; | ||
| 369 | |||
| 370 | |||
| 371 | /* Function code bits. | ||
| 372 | */ | ||
| 373 | #define SCC_EB ((u_char)0x10) /* Set big endian byte order */ | ||
| 374 | #define SCC_FC_DMA ((u_char)0x08) /* Set SDMA */ | ||
| 375 | |||
| 376 | /* CPM Ethernet through SCC1. | ||
| 377 | */ | ||
| 378 | typedef struct scc_enet { | ||
| 379 | sccp_t sen_genscc; | ||
| 380 | uint sen_cpres; /* Preset CRC */ | ||
| 381 | uint sen_cmask; /* Constant mask for CRC */ | ||
| 382 | uint sen_crcec; /* CRC Error counter */ | ||
| 383 | uint sen_alec; /* alignment error counter */ | ||
| 384 | uint sen_disfc; /* discard frame counter */ | ||
| 385 | ushort sen_pads; /* Tx short frame pad character */ | ||
| 386 | ushort sen_retlim; /* Retry limit threshold */ | ||
| 387 | ushort sen_retcnt; /* Retry limit counter */ | ||
| 388 | ushort sen_maxflr; /* maximum frame length register */ | ||
| 389 | ushort sen_minflr; /* minimum frame length register */ | ||
| 390 | ushort sen_maxd1; /* maximum DMA1 length */ | ||
| 391 | ushort sen_maxd2; /* maximum DMA2 length */ | ||
| 392 | ushort sen_maxd; /* Rx max DMA */ | ||
| 393 | ushort sen_dmacnt; /* Rx DMA counter */ | ||
| 394 | ushort sen_maxb; /* Max BD byte count */ | ||
| 395 | ushort sen_gaddr1; /* Group address filter */ | ||
| 396 | ushort sen_gaddr2; | ||
| 397 | ushort sen_gaddr3; | ||
| 398 | ushort sen_gaddr4; | ||
| 399 | uint sen_tbuf0data0; /* Save area 0 - current frame */ | ||
| 400 | uint sen_tbuf0data1; /* Save area 1 - current frame */ | ||
| 401 | uint sen_tbuf0rba; /* Internal */ | ||
| 402 | uint sen_tbuf0crc; /* Internal */ | ||
| 403 | ushort sen_tbuf0bcnt; /* Internal */ | ||
| 404 | ushort sen_paddrh; /* physical address (MSB) */ | ||
| 405 | ushort sen_paddrm; | ||
| 406 | ushort sen_paddrl; /* physical address (LSB) */ | ||
| 407 | ushort sen_pper; /* persistence */ | ||
| 408 | ushort sen_rfbdptr; /* Rx first BD pointer */ | ||
| 409 | ushort sen_tfbdptr; /* Tx first BD pointer */ | ||
| 410 | ushort sen_tlbdptr; /* Tx last BD pointer */ | ||
| 411 | uint sen_tbuf1data0; /* Save area 0 - current frame */ | ||
| 412 | uint sen_tbuf1data1; /* Save area 1 - current frame */ | ||
| 413 | uint sen_tbuf1rba; /* Internal */ | ||
| 414 | uint sen_tbuf1crc; /* Internal */ | ||
| 415 | ushort sen_tbuf1bcnt; /* Internal */ | ||
| 416 | ushort sen_txlen; /* Tx Frame length counter */ | ||
| 417 | ushort sen_iaddr1; /* Individual address filter */ | ||
| 418 | ushort sen_iaddr2; | ||
| 419 | ushort sen_iaddr3; | ||
| 420 | ushort sen_iaddr4; | ||
| 421 | ushort sen_boffcnt; /* Backoff counter */ | ||
| 422 | |||
| 423 | /* NOTE: Some versions of the manual have the following items | ||
| 424 | * incorrectly documented. Below is the proper order. | ||
| 425 | */ | ||
| 426 | ushort sen_taddrh; /* temp address (MSB) */ | ||
| 427 | ushort sen_taddrm; | ||
| 428 | ushort sen_taddrl; /* temp address (LSB) */ | ||
| 429 | } scc_enet_t; | ||
| 430 | |||
| 431 | |||
| 432 | |||
| 433 | #if defined (CONFIG_UCQUICC) | ||
| 434 | /* uCquicc has the following signals connected to Ethernet: | ||
| 435 | * 68360 - lxt905 | ||
| 436 | * PA0/RXD1 - rxd | ||
| 437 | * PA1/TXD1 - txd | ||
| 438 | * PA8/CLK1 - tclk | ||
| 439 | * PA9/CLK2 - rclk | ||
| 440 | * PC0/!RTS1 - t_en | ||
| 441 | * PC1/!CTS1 - col | ||
| 442 | * PC5/!CD1 - cd | ||
| 443 | */ | ||
| 444 | #define PA_ENET_RXD PA_RXD1 | ||
| 445 | #define PA_ENET_TXD PA_TXD1 | ||
| 446 | #define PA_ENET_TCLK PA_CLK1 | ||
| 447 | #define PA_ENET_RCLK PA_CLK2 | ||
| 448 | #define PC_ENET_TENA PC_RTS1 | ||
| 449 | #define PC_ENET_CLSN PC_CTS1 | ||
| 450 | #define PC_ENET_RENA PC_CD1 | ||
| 451 | |||
| 452 | /* Control bits in the SICR to route TCLK (CLK1) and RCLK (CLK2) to | ||
| 453 | * SCC1. | ||
| 454 | */ | ||
| 455 | #define SICR_ENET_MASK ((uint)0x000000ff) | ||
| 456 | #define SICR_ENET_CLKRT ((uint)0x0000002c) | ||
| 457 | |||
| 458 | #endif /* config_ucquicc */ | ||
| 459 | |||
| 460 | |||
| 461 | #ifdef MBX | ||
| 462 | /* Bits in parallel I/O port registers that have to be set/cleared | ||
| 463 | * to configure the pins for SCC1 use. The TCLK and RCLK seem unique | ||
| 464 | * to the MBX860 board. Any two of the four available clocks could be | ||
| 465 | * used, and the MPC860 cookbook manual has an example using different | ||
| 466 | * clock pins. | ||
| 467 | */ | ||
| 468 | #define PA_ENET_RXD ((ushort)0x0001) | ||
| 469 | #define PA_ENET_TXD ((ushort)0x0002) | ||
| 470 | #define PA_ENET_TCLK ((ushort)0x0200) | ||
| 471 | #define PA_ENET_RCLK ((ushort)0x0800) | ||
| 472 | #define PC_ENET_TENA ((ushort)0x0001) | ||
| 473 | #define PC_ENET_CLSN ((ushort)0x0010) | ||
| 474 | #define PC_ENET_RENA ((ushort)0x0020) | ||
| 475 | |||
| 476 | /* Control bits in the SICR to route TCLK (CLK2) and RCLK (CLK4) to | ||
| 477 | * SCC1. Also, make sure GR1 (bit 24) and SC1 (bit 25) are zero. | ||
| 478 | */ | ||
| 479 | #define SICR_ENET_MASK ((uint)0x000000ff) | ||
| 480 | #define SICR_ENET_CLKRT ((uint)0x0000003d) | ||
| 481 | #endif | ||
| 482 | |||
| 483 | #ifdef CONFIG_RPXLITE | ||
| 484 | /* This ENET stuff is for the MPC850 with ethernet on SCC2. Some of | ||
| 485 | * this may be unique to the RPX-Lite configuration. | ||
| 486 | * Note TENA is on Port B. | ||
| 487 | */ | ||
| 488 | #define PA_ENET_RXD ((ushort)0x0004) | ||
| 489 | #define PA_ENET_TXD ((ushort)0x0008) | ||
| 490 | #define PA_ENET_TCLK ((ushort)0x0200) | ||
| 491 | #define PA_ENET_RCLK ((ushort)0x0800) | ||
| 492 | #define PB_ENET_TENA ((uint)0x00002000) | ||
| 493 | #define PC_ENET_CLSN ((ushort)0x0040) | ||
| 494 | #define PC_ENET_RENA ((ushort)0x0080) | ||
| 495 | |||
| 496 | #define SICR_ENET_MASK ((uint)0x0000ff00) | ||
| 497 | #define SICR_ENET_CLKRT ((uint)0x00003d00) | ||
| 498 | #endif | ||
| 499 | |||
| 500 | #ifdef CONFIG_BSEIP | ||
| 501 | /* This ENET stuff is for the MPC823 with ethernet on SCC2. | ||
| 502 | * This is unique to the BSE ip-Engine board. | ||
| 503 | */ | ||
| 504 | #define PA_ENET_RXD ((ushort)0x0004) | ||
| 505 | #define PA_ENET_TXD ((ushort)0x0008) | ||
| 506 | #define PA_ENET_TCLK ((ushort)0x0100) | ||
| 507 | #define PA_ENET_RCLK ((ushort)0x0200) | ||
| 508 | #define PB_ENET_TENA ((uint)0x00002000) | ||
| 509 | #define PC_ENET_CLSN ((ushort)0x0040) | ||
| 510 | #define PC_ENET_RENA ((ushort)0x0080) | ||
| 511 | |||
| 512 | /* BSE uses port B and C bits for PHY control also. | ||
| 513 | */ | ||
| 514 | #define PB_BSE_POWERUP ((uint)0x00000004) | ||
| 515 | #define PB_BSE_FDXDIS ((uint)0x00008000) | ||
| 516 | #define PC_BSE_LOOPBACK ((ushort)0x0800) | ||
| 517 | |||
| 518 | #define SICR_ENET_MASK ((uint)0x0000ff00) | ||
| 519 | #define SICR_ENET_CLKRT ((uint)0x00002c00) | ||
| 520 | #endif | ||
| 521 | |||
| 522 | /* SCC Event register as used by Ethernet. | ||
| 523 | */ | ||
| 524 | #define SCCE_ENET_GRA ((ushort)0x0080) /* Graceful stop complete */ | ||
| 525 | #define SCCE_ENET_TXE ((ushort)0x0010) /* Transmit Error */ | ||
| 526 | #define SCCE_ENET_RXF ((ushort)0x0008) /* Full frame received */ | ||
| 527 | #define SCCE_ENET_BSY ((ushort)0x0004) /* All incoming buffers full */ | ||
| 528 | #define SCCE_ENET_TXB ((ushort)0x0002) /* A buffer was transmitted */ | ||
| 529 | #define SCCE_ENET_RXB ((ushort)0x0001) /* A buffer was received */ | ||
| 530 | |||
| 531 | /* SCC Mode Register (PMSR) as used by Ethernet. | ||
| 532 | */ | ||
| 533 | #define SCC_PMSR_HBC ((ushort)0x8000) /* Enable heartbeat */ | ||
| 534 | #define SCC_PMSR_FC ((ushort)0x4000) /* Force collision */ | ||
| 535 | #define SCC_PMSR_RSH ((ushort)0x2000) /* Receive short frames */ | ||
| 536 | #define SCC_PMSR_IAM ((ushort)0x1000) /* Check individual hash */ | ||
| 537 | #define SCC_PMSR_ENCRC ((ushort)0x0800) /* Ethernet CRC mode */ | ||
| 538 | #define SCC_PMSR_PRO ((ushort)0x0200) /* Promiscuous mode */ | ||
| 539 | #define SCC_PMSR_BRO ((ushort)0x0100) /* Catch broadcast pkts */ | ||
| 540 | #define SCC_PMSR_SBT ((ushort)0x0080) /* Special backoff timer */ | ||
| 541 | #define SCC_PMSR_LPB ((ushort)0x0040) /* Set Loopback mode */ | ||
| 542 | #define SCC_PMSR_SIP ((ushort)0x0020) /* Sample Input Pins */ | ||
| 543 | #define SCC_PMSR_LCW ((ushort)0x0010) /* Late collision window */ | ||
| 544 | #define SCC_PMSR_NIB22 ((ushort)0x000a) /* Start frame search */ | ||
| 545 | #define SCC_PMSR_FDE ((ushort)0x0001) /* Full duplex enable */ | ||
| 546 | |||
| 547 | /* Buffer descriptor control/status used by Ethernet receive. | ||
| 548 | */ | ||
| 549 | #define BD_ENET_RX_EMPTY ((ushort)0x8000) | ||
| 550 | #define BD_ENET_RX_WRAP ((ushort)0x2000) | ||
| 551 | #define BD_ENET_RX_INTR ((ushort)0x1000) | ||
| 552 | #define BD_ENET_RX_LAST ((ushort)0x0800) | ||
| 553 | #define BD_ENET_RX_FIRST ((ushort)0x0400) | ||
| 554 | #define BD_ENET_RX_MISS ((ushort)0x0100) | ||
| 555 | #define BD_ENET_RX_LG ((ushort)0x0020) | ||
| 556 | #define BD_ENET_RX_NO ((ushort)0x0010) | ||
| 557 | #define BD_ENET_RX_SH ((ushort)0x0008) | ||
| 558 | #define BD_ENET_RX_CR ((ushort)0x0004) | ||
| 559 | #define BD_ENET_RX_OV ((ushort)0x0002) | ||
| 560 | #define BD_ENET_RX_CL ((ushort)0x0001) | ||
| 561 | #define BD_ENET_RX_STATS ((ushort)0x013f) /* All status bits */ | ||
| 562 | |||
| 563 | /* Buffer descriptor control/status used by Ethernet transmit. | ||
| 564 | */ | ||
| 565 | #define BD_ENET_TX_READY ((ushort)0x8000) | ||
| 566 | #define BD_ENET_TX_PAD ((ushort)0x4000) | ||
| 567 | #define BD_ENET_TX_WRAP ((ushort)0x2000) | ||
| 568 | #define BD_ENET_TX_INTR ((ushort)0x1000) | ||
| 569 | #define BD_ENET_TX_LAST ((ushort)0x0800) | ||
| 570 | #define BD_ENET_TX_TC ((ushort)0x0400) | ||
| 571 | #define BD_ENET_TX_DEF ((ushort)0x0200) | ||
| 572 | #define BD_ENET_TX_HB ((ushort)0x0100) | ||
| 573 | #define BD_ENET_TX_LC ((ushort)0x0080) | ||
| 574 | #define BD_ENET_TX_RL ((ushort)0x0040) | ||
| 575 | #define BD_ENET_TX_RCMASK ((ushort)0x003c) | ||
| 576 | #define BD_ENET_TX_UN ((ushort)0x0002) | ||
| 577 | #define BD_ENET_TX_CSL ((ushort)0x0001) | ||
| 578 | #define BD_ENET_TX_STATS ((ushort)0x03ff) /* All status bits */ | ||
| 579 | |||
| 580 | /* SCC as UART | ||
| 581 | */ | ||
| 582 | typedef struct scc_uart { | ||
| 583 | sccp_t scc_genscc; | ||
| 584 | uint scc_res1; /* Reserved */ | ||
| 585 | uint scc_res2; /* Reserved */ | ||
| 586 | ushort scc_maxidl; /* Maximum idle chars */ | ||
| 587 | ushort scc_idlc; /* temp idle counter */ | ||
| 588 | ushort scc_brkcr; /* Break count register */ | ||
| 589 | ushort scc_parec; /* receive parity error counter */ | ||
| 590 | ushort scc_frmec; /* receive framing error counter */ | ||
| 591 | ushort scc_nosec; /* receive noise counter */ | ||
| 592 | ushort scc_brkec; /* receive break condition counter */ | ||
| 593 | ushort scc_brkln; /* last received break length */ | ||
| 594 | ushort scc_uaddr1; /* UART address character 1 */ | ||
| 595 | ushort scc_uaddr2; /* UART address character 2 */ | ||
| 596 | ushort scc_rtemp; /* Temp storage */ | ||
| 597 | ushort scc_toseq; /* Transmit out of sequence char */ | ||
| 598 | ushort scc_char1; /* control character 1 */ | ||
| 599 | ushort scc_char2; /* control character 2 */ | ||
| 600 | ushort scc_char3; /* control character 3 */ | ||
| 601 | ushort scc_char4; /* control character 4 */ | ||
| 602 | ushort scc_char5; /* control character 5 */ | ||
| 603 | ushort scc_char6; /* control character 6 */ | ||
| 604 | ushort scc_char7; /* control character 7 */ | ||
| 605 | ushort scc_char8; /* control character 8 */ | ||
| 606 | ushort scc_rccm; /* receive control character mask */ | ||
| 607 | ushort scc_rccr; /* receive control character register */ | ||
| 608 | ushort scc_rlbc; /* receive last break character */ | ||
| 609 | } scc_uart_t; | ||
| 610 | |||
| 611 | /* SCC Event and Mask registers when it is used as a UART. | ||
| 612 | */ | ||
| 613 | #define UART_SCCM_GLR ((ushort)0x1000) | ||
| 614 | #define UART_SCCM_GLT ((ushort)0x0800) | ||
| 615 | #define UART_SCCM_AB ((ushort)0x0200) | ||
| 616 | #define UART_SCCM_IDL ((ushort)0x0100) | ||
| 617 | #define UART_SCCM_GRA ((ushort)0x0080) | ||
| 618 | #define UART_SCCM_BRKE ((ushort)0x0040) | ||
| 619 | #define UART_SCCM_BRKS ((ushort)0x0020) | ||
| 620 | #define UART_SCCM_CCR ((ushort)0x0008) | ||
| 621 | #define UART_SCCM_BSY ((ushort)0x0004) | ||
| 622 | #define UART_SCCM_TX ((ushort)0x0002) | ||
| 623 | #define UART_SCCM_RX ((ushort)0x0001) | ||
| 624 | |||
| 625 | /* The SCC PMSR when used as a UART. | ||
| 626 | */ | ||
| 627 | #define SCU_PMSR_FLC ((ushort)0x8000) | ||
| 628 | #define SCU_PMSR_SL ((ushort)0x4000) | ||
| 629 | #define SCU_PMSR_CL ((ushort)0x3000) | ||
| 630 | #define SCU_PMSR_UM ((ushort)0x0c00) | ||
| 631 | #define SCU_PMSR_FRZ ((ushort)0x0200) | ||
| 632 | #define SCU_PMSR_RZS ((ushort)0x0100) | ||
| 633 | #define SCU_PMSR_SYN ((ushort)0x0080) | ||
| 634 | #define SCU_PMSR_DRT ((ushort)0x0040) | ||
| 635 | #define SCU_PMSR_PEN ((ushort)0x0010) | ||
| 636 | #define SCU_PMSR_RPM ((ushort)0x000c) | ||
| 637 | #define SCU_PMSR_REVP ((ushort)0x0008) | ||
| 638 | #define SCU_PMSR_TPM ((ushort)0x0003) | ||
| 639 | #define SCU_PMSR_TEVP ((ushort)0x0003) | ||
| 640 | |||
| 641 | /* CPM Transparent mode SCC. | ||
| 642 | */ | ||
| 643 | typedef struct scc_trans { | ||
| 644 | sccp_t st_genscc; | ||
| 645 | uint st_cpres; /* Preset CRC */ | ||
| 646 | uint st_cmask; /* Constant mask for CRC */ | ||
| 647 | } scc_trans_t; | ||
| 648 | |||
| 649 | #define BD_SCC_TX_LAST ((ushort)0x0800) | ||
| 650 | |||
| 651 | |||
| 652 | |||
| 653 | /* CPM interrupts. There are nearly 32 interrupts generated by CPM | ||
| 654 | * channels or devices. All of these are presented to the PPC core | ||
| 655 | * as a single interrupt. The CPM interrupt handler dispatches its | ||
| 656 | * own handlers, in a similar fashion to the PPC core handler. We | ||
| 657 | * use the table as defined in the manuals (i.e. no special high | ||
| 658 | * priority and SCC1 == SCCa, etc...). | ||
| 659 | */ | ||
| 660 | /* #define CPMVEC_NR 32 */ | ||
| 661 | /* #define CPMVEC_PIO_PC15 ((ushort)0x1f) */ | ||
| 662 | /* #define CPMVEC_SCC1 ((ushort)0x1e) */ | ||
| 663 | /* #define CPMVEC_SCC2 ((ushort)0x1d) */ | ||
| 664 | /* #define CPMVEC_SCC3 ((ushort)0x1c) */ | ||
| 665 | /* #define CPMVEC_SCC4 ((ushort)0x1b) */ | ||
| 666 | /* #define CPMVEC_PIO_PC14 ((ushort)0x1a) */ | ||
| 667 | /* #define CPMVEC_TIMER1 ((ushort)0x19) */ | ||
| 668 | /* #define CPMVEC_PIO_PC13 ((ushort)0x18) */ | ||
| 669 | /* #define CPMVEC_PIO_PC12 ((ushort)0x17) */ | ||
| 670 | /* #define CPMVEC_SDMA_CB_ERR ((ushort)0x16) */ | ||
| 671 | /* #define CPMVEC_IDMA1 ((ushort)0x15) */ | ||
| 672 | /* #define CPMVEC_IDMA2 ((ushort)0x14) */ | ||
| 673 | /* #define CPMVEC_TIMER2 ((ushort)0x12) */ | ||
| 674 | /* #define CPMVEC_RISCTIMER ((ushort)0x11) */ | ||
| 675 | /* #define CPMVEC_I2C ((ushort)0x10) */ | ||
| 676 | /* #define CPMVEC_PIO_PC11 ((ushort)0x0f) */ | ||
| 677 | /* #define CPMVEC_PIO_PC10 ((ushort)0x0e) */ | ||
| 678 | /* #define CPMVEC_TIMER3 ((ushort)0x0c) */ | ||
| 679 | /* #define CPMVEC_PIO_PC9 ((ushort)0x0b) */ | ||
| 680 | /* #define CPMVEC_PIO_PC8 ((ushort)0x0a) */ | ||
| 681 | /* #define CPMVEC_PIO_PC7 ((ushort)0x09) */ | ||
| 682 | /* #define CPMVEC_TIMER4 ((ushort)0x07) */ | ||
| 683 | /* #define CPMVEC_PIO_PC6 ((ushort)0x06) */ | ||
| 684 | /* #define CPMVEC_SPI ((ushort)0x05) */ | ||
| 685 | /* #define CPMVEC_SMC1 ((ushort)0x04) */ | ||
| 686 | /* #define CPMVEC_SMC2 ((ushort)0x03) */ | ||
| 687 | /* #define CPMVEC_PIO_PC5 ((ushort)0x02) */ | ||
| 688 | /* #define CPMVEC_PIO_PC4 ((ushort)0x01) */ | ||
| 689 | /* #define CPMVEC_ERROR ((ushort)0x00) */ | ||
| 690 | |||
| 691 | extern void cpm_install_handler(int vec, void (*handler)(void *), void *dev_id); | ||
| 692 | |||
| 693 | /* CPM interrupt configuration vector. | ||
| 694 | */ | ||
| 695 | #define CICR_SCD_SCC4 ((uint)0x00c00000) /* SCC4 @ SCCd */ | ||
| 696 | #define CICR_SCC_SCC3 ((uint)0x00200000) /* SCC3 @ SCCc */ | ||
| 697 | #define CICR_SCB_SCC2 ((uint)0x00040000) /* SCC2 @ SCCb */ | ||
| 698 | #define CICR_SCA_SCC1 ((uint)0x00000000) /* SCC1 @ SCCa */ | ||
| 699 | #define CICR_IRL_MASK ((uint)0x0000e000) /* Core interrupt */ | ||
| 700 | #define CICR_HP_MASK ((uint)0x00001f00) /* Hi-pri int. */ | ||
| 701 | #define CICR_IEN ((uint)0x00000080) /* Int. enable */ | ||
| 702 | #define CICR_SPS ((uint)0x00000001) /* SCC Spread */ | ||
| 703 | #endif /* __CPM_360__ */ | ||
diff --git a/arch/m68knommu/include/asm/cputime.h b/arch/m68knommu/include/asm/cputime.h deleted file mode 100644 index a0c4a660878d..000000000000 --- a/arch/m68knommu/include/asm/cputime.h +++ /dev/null | |||
| @@ -1,6 +0,0 @@ | |||
| 1 | #ifndef __M68KNOMMU_CPUTIME_H | ||
| 2 | #define __M68KNOMMU_CPUTIME_H | ||
| 3 | |||
| 4 | #include <asm-generic/cputime.h> | ||
| 5 | |||
| 6 | #endif /* __M68KNOMMU_CPUTIME_H */ | ||
diff --git a/arch/m68knommu/include/asm/current.h b/arch/m68knommu/include/asm/current.h deleted file mode 100644 index 53ee0f9f7cef..000000000000 --- a/arch/m68knommu/include/asm/current.h +++ /dev/null | |||
| @@ -1,24 +0,0 @@ | |||
| 1 | #ifndef _M68KNOMMU_CURRENT_H | ||
| 2 | #define _M68KNOMMU_CURRENT_H | ||
| 3 | /* | ||
| 4 | * current.h | ||
| 5 | * (C) Copyright 2000, Lineo, David McCullough <davidm@uclinux.org> | ||
| 6 | * (C) Copyright 2002, Greg Ungerer (gerg@snapgear.com) | ||
| 7 | * | ||
| 8 | * rather than dedicate a register (as the m68k source does), we | ||
| 9 | * just keep a global, we should probably just change it all to be | ||
| 10 | * current and lose _current_task. | ||
| 11 | */ | ||
| 12 | |||
| 13 | #include <linux/thread_info.h> | ||
| 14 | |||
| 15 | struct task_struct; | ||
| 16 | |||
| 17 | static inline struct task_struct *get_current(void) | ||
| 18 | { | ||
| 19 | return(current_thread_info()->task); | ||
| 20 | } | ||
| 21 | |||
| 22 | #define current get_current() | ||
| 23 | |||
| 24 | #endif /* _M68KNOMMU_CURRENT_H */ | ||
diff --git a/arch/m68knommu/include/asm/dbg.h b/arch/m68knommu/include/asm/dbg.h deleted file mode 100644 index 27af3270f671..000000000000 --- a/arch/m68knommu/include/asm/dbg.h +++ /dev/null | |||
| @@ -1,6 +0,0 @@ | |||
| 1 | #define DEBUG 1 | ||
| 2 | #ifdef CONFIG_COLDFIRE | ||
| 3 | #define BREAK asm volatile ("halt") | ||
| 4 | #else | ||
| 5 | #define BREAK *(volatile unsigned char *)0xdeadbee0 = 0 | ||
| 6 | #endif | ||
diff --git a/arch/m68knommu/include/asm/delay.h b/arch/m68knommu/include/asm/delay.h deleted file mode 100644 index 55cbd6294ab6..000000000000 --- a/arch/m68knommu/include/asm/delay.h +++ /dev/null | |||
| @@ -1,76 +0,0 @@ | |||
| 1 | #ifndef _M68KNOMMU_DELAY_H | ||
| 2 | #define _M68KNOMMU_DELAY_H | ||
| 3 | |||
| 4 | /* | ||
| 5 | * Copyright (C) 1994 Hamish Macdonald | ||
| 6 | * Copyright (C) 2004 Greg Ungerer <gerg@snapgear.com> | ||
| 7 | */ | ||
| 8 | |||
| 9 | #include <asm/param.h> | ||
| 10 | |||
| 11 | static inline void __delay(unsigned long loops) | ||
| 12 | { | ||
| 13 | #if defined(CONFIG_COLDFIRE) | ||
| 14 | /* The coldfire runs this loop at significantly different speeds | ||
| 15 | * depending upon long word alignment or not. We'll pad it to | ||
| 16 | * long word alignment which is the faster version. | ||
| 17 | * The 0x4a8e is of course a 'tstl %fp' instruction. This is better | ||
| 18 | * than using a NOP (0x4e71) instruction because it executes in one | ||
| 19 | * cycle not three and doesn't allow for an arbitary delay waiting | ||
| 20 | * for bus cycles to finish. Also fp/a6 isn't likely to cause a | ||
| 21 | * stall waiting for the register to become valid if such is added | ||
| 22 | * to the coldfire at some stage. | ||
| 23 | */ | ||
| 24 | __asm__ __volatile__ ( ".balignw 4, 0x4a8e\n\t" | ||
| 25 | "1: subql #1, %0\n\t" | ||
| 26 | "jcc 1b" | ||
| 27 | : "=d" (loops) : "0" (loops)); | ||
| 28 | #else | ||
| 29 | __asm__ __volatile__ ( "1: subql #1, %0\n\t" | ||
| 30 | "jcc 1b" | ||
| 31 | : "=d" (loops) : "0" (loops)); | ||
| 32 | #endif | ||
| 33 | } | ||
| 34 | |||
| 35 | /* | ||
| 36 | * Ideally we use a 32*32->64 multiply to calculate the number of | ||
| 37 | * loop iterations, but the older standard 68k and ColdFire do not | ||
| 38 | * have this instruction. So for them we have a clsoe approximation | ||
| 39 | * loop using 32*32->32 multiplies only. This calculation based on | ||
| 40 | * the ARM version of delay. | ||
| 41 | * | ||
| 42 | * We want to implement: | ||
| 43 | * | ||
| 44 | * loops = (usecs * 0x10c6 * HZ * loops_per_jiffy) / 2^32 | ||
| 45 | */ | ||
| 46 | |||
| 47 | #define HZSCALE (268435456 / (1000000/HZ)) | ||
| 48 | |||
| 49 | extern unsigned long loops_per_jiffy; | ||
| 50 | |||
| 51 | static inline void _udelay(unsigned long usecs) | ||
| 52 | { | ||
| 53 | #if defined(CONFIG_M68328) || defined(CONFIG_M68EZ328) || \ | ||
| 54 | defined(CONFIG_M68VZ328) || defined(CONFIG_M68360) || \ | ||
| 55 | defined(CONFIG_COLDFIRE) | ||
| 56 | __delay((((usecs * HZSCALE) >> 11) * (loops_per_jiffy >> 11)) >> 6); | ||
| 57 | #else | ||
| 58 | unsigned long tmp; | ||
| 59 | |||
| 60 | usecs *= 4295; /* 2**32 / 1000000 */ | ||
| 61 | __asm__ ("mulul %2,%0:%1" | ||
| 62 | : "=d" (usecs), "=d" (tmp) | ||
| 63 | : "d" (usecs), "1" (loops_per_jiffy*HZ)); | ||
| 64 | __delay(usecs); | ||
| 65 | #endif | ||
| 66 | } | ||
| 67 | |||
| 68 | /* | ||
| 69 | * Moved the udelay() function into library code, no longer inlined. | ||
| 70 | * I had to change the algorithm because we are overflowing now on | ||
| 71 | * the faster ColdFire parts. The code is a little bigger, so it makes | ||
| 72 | * sense to library it. | ||
| 73 | */ | ||
| 74 | extern void udelay(unsigned long usecs); | ||
| 75 | |||
| 76 | #endif /* defined(_M68KNOMMU_DELAY_H) */ | ||
diff --git a/arch/m68knommu/include/asm/device.h b/arch/m68knommu/include/asm/device.h deleted file mode 100644 index d8f9872b0e2d..000000000000 --- a/arch/m68knommu/include/asm/device.h +++ /dev/null | |||
| @@ -1,7 +0,0 @@ | |||
| 1 | /* | ||
| 2 | * Arch specific extensions to struct device | ||
| 3 | * | ||
| 4 | * This file is released under the GPLv2 | ||
| 5 | */ | ||
| 6 | #include <asm-generic/device.h> | ||
| 7 | |||
diff --git a/arch/m68knommu/include/asm/div64.h b/arch/m68knommu/include/asm/div64.h deleted file mode 100644 index 6cd978cefb28..000000000000 --- a/arch/m68knommu/include/asm/div64.h +++ /dev/null | |||
| @@ -1 +0,0 @@ | |||
| 1 | #include <asm-generic/div64.h> | ||
diff --git a/arch/m68knommu/include/asm/dma-mapping.h b/arch/m68knommu/include/asm/dma-mapping.h deleted file mode 100644 index 6aeab18e58bd..000000000000 --- a/arch/m68knommu/include/asm/dma-mapping.h +++ /dev/null | |||
| @@ -1,10 +0,0 @@ | |||
| 1 | #ifndef _M68KNOMMU_DMA_MAPPING_H | ||
| 2 | #define _M68KNOMMU_DMA_MAPPING_H | ||
| 3 | |||
| 4 | #ifdef CONFIG_PCI | ||
| 5 | #include <asm-generic/dma-mapping.h> | ||
| 6 | #else | ||
| 7 | #include <asm-generic/dma-mapping-broken.h> | ||
| 8 | #endif | ||
| 9 | |||
| 10 | #endif /* _M68KNOMMU_DMA_MAPPING_H */ | ||
diff --git a/arch/m68knommu/include/asm/dma.h b/arch/m68knommu/include/asm/dma.h deleted file mode 100644 index 939a02056217..000000000000 --- a/arch/m68knommu/include/asm/dma.h +++ /dev/null | |||
| @@ -1,494 +0,0 @@ | |||
| 1 | #ifndef _M68K_DMA_H | ||
| 2 | #define _M68K_DMA_H 1 | ||
| 3 | |||
| 4 | //#define DMA_DEBUG 1 | ||
| 5 | |||
| 6 | |||
| 7 | #ifdef CONFIG_COLDFIRE | ||
| 8 | /* | ||
| 9 | * ColdFire DMA Model: | ||
| 10 | * ColdFire DMA supports two forms of DMA: Single and Dual address. Single | ||
| 11 | * address mode emits a source address, and expects that the device will either | ||
| 12 | * pick up the data (DMA READ) or source data (DMA WRITE). This implies that | ||
| 13 | * the device will place data on the correct byte(s) of the data bus, as the | ||
| 14 | * memory transactions are always 32 bits. This implies that only 32 bit | ||
| 15 | * devices will find single mode transfers useful. Dual address DMA mode | ||
| 16 | * performs two cycles: source read and destination write. ColdFire will | ||
| 17 | * align the data so that the device will always get the correct bytes, thus | ||
| 18 | * is useful for 8 and 16 bit devices. This is the mode that is supported | ||
| 19 | * below. | ||
| 20 | * | ||
| 21 | * AUG/22/2000 : added support for 32-bit Dual-Address-Mode (K) 2000 | ||
| 22 | * Oliver Kamphenkel (O.Kamphenkel@tu-bs.de) | ||
| 23 | * | ||
| 24 | * AUG/25/2000 : addad support for 8, 16 and 32-bit Single-Address-Mode (K)2000 | ||
| 25 | * Oliver Kamphenkel (O.Kamphenkel@tu-bs.de) | ||
| 26 | * | ||
| 27 | * APR/18/2002 : added proper support for MCF5272 DMA controller. | ||
| 28 | * Arthur Shipkowski (art@videon-central.com) | ||
| 29 | */ | ||
| 30 | |||
| 31 | #include <asm/coldfire.h> | ||
| 32 | #include <asm/mcfsim.h> | ||
| 33 | #include <asm/mcfdma.h> | ||
| 34 | |||
| 35 | /* | ||
| 36 | * Set number of channels of DMA on ColdFire for different implementations. | ||
| 37 | */ | ||
| 38 | #if defined(CONFIG_M5249) || defined(CONFIG_M5307) || defined(CONFIG_M5407) || \ | ||
| 39 | defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x) | ||
| 40 | #define MAX_M68K_DMA_CHANNELS 4 | ||
| 41 | #elif defined(CONFIG_M5272) | ||
| 42 | #define MAX_M68K_DMA_CHANNELS 1 | ||
| 43 | #elif defined(CONFIG_M532x) | ||
| 44 | #define MAX_M68K_DMA_CHANNELS 0 | ||
| 45 | #else | ||
| 46 | #define MAX_M68K_DMA_CHANNELS 2 | ||
| 47 | #endif | ||
| 48 | |||
| 49 | extern unsigned int dma_base_addr[MAX_M68K_DMA_CHANNELS]; | ||
| 50 | extern unsigned int dma_device_address[MAX_M68K_DMA_CHANNELS]; | ||
| 51 | |||
| 52 | #if !defined(CONFIG_M5272) | ||
| 53 | #define DMA_MODE_WRITE_BIT 0x01 /* Memory/IO to IO/Memory select */ | ||
| 54 | #define DMA_MODE_WORD_BIT 0x02 /* 8 or 16 bit transfers */ | ||
| 55 | #define DMA_MODE_LONG_BIT 0x04 /* or 32 bit transfers */ | ||
| 56 | #define DMA_MODE_SINGLE_BIT 0x08 /* single-address-mode */ | ||
| 57 | |||
| 58 | /* I/O to memory, 8 bits, mode */ | ||
| 59 | #define DMA_MODE_READ 0 | ||
| 60 | /* memory to I/O, 8 bits, mode */ | ||
| 61 | #define DMA_MODE_WRITE 1 | ||
| 62 | /* I/O to memory, 16 bits, mode */ | ||
| 63 | #define DMA_MODE_READ_WORD 2 | ||
| 64 | /* memory to I/O, 16 bits, mode */ | ||
| 65 | #define DMA_MODE_WRITE_WORD 3 | ||
| 66 | /* I/O to memory, 32 bits, mode */ | ||
| 67 | #define DMA_MODE_READ_LONG 4 | ||
| 68 | /* memory to I/O, 32 bits, mode */ | ||
| 69 | #define DMA_MODE_WRITE_LONG 5 | ||
| 70 | /* I/O to memory, 8 bits, single-address-mode */ | ||
| 71 | #define DMA_MODE_READ_SINGLE 8 | ||
| 72 | /* memory to I/O, 8 bits, single-address-mode */ | ||
| 73 | #define DMA_MODE_WRITE_SINGLE 9 | ||
| 74 | /* I/O to memory, 16 bits, single-address-mode */ | ||
| 75 | #define DMA_MODE_READ_WORD_SINGLE 10 | ||
| 76 | /* memory to I/O, 16 bits, single-address-mode */ | ||
| 77 | #define DMA_MODE_WRITE_WORD_SINGLE 11 | ||
| 78 | /* I/O to memory, 32 bits, single-address-mode */ | ||
| 79 | #define DMA_MODE_READ_LONG_SINGLE 12 | ||
| 80 | /* memory to I/O, 32 bits, single-address-mode */ | ||
| 81 | #define DMA_MODE_WRITE_LONG_SINGLE 13 | ||
| 82 | |||
| 83 | #else /* CONFIG_M5272 is defined */ | ||
| 84 | |||
| 85 | /* Source static-address mode */ | ||
| 86 | #define DMA_MODE_SRC_SA_BIT 0x01 | ||
| 87 | /* Two bits to select between all four modes */ | ||
| 88 | #define DMA_MODE_SSIZE_MASK 0x06 | ||
| 89 | /* Offset to shift bits in */ | ||
| 90 | #define DMA_MODE_SSIZE_OFF 0x01 | ||
| 91 | /* Destination static-address mode */ | ||
| 92 | #define DMA_MODE_DES_SA_BIT 0x10 | ||
| 93 | /* Two bits to select between all four modes */ | ||
| 94 | #define DMA_MODE_DSIZE_MASK 0x60 | ||
| 95 | /* Offset to shift bits in */ | ||
| 96 | #define DMA_MODE_DSIZE_OFF 0x05 | ||
| 97 | /* Size modifiers */ | ||
| 98 | #define DMA_MODE_SIZE_LONG 0x00 | ||
| 99 | #define DMA_MODE_SIZE_BYTE 0x01 | ||
| 100 | #define DMA_MODE_SIZE_WORD 0x02 | ||
| 101 | #define DMA_MODE_SIZE_LINE 0x03 | ||
| 102 | |||
| 103 | /* | ||
| 104 | * Aliases to help speed quick ports; these may be suboptimal, however. They | ||
| 105 | * do not include the SINGLE mode modifiers since the MCF5272 does not have a | ||
| 106 | * mode where the device is in control of its addressing. | ||
| 107 | */ | ||
| 108 | |||
| 109 | /* I/O to memory, 8 bits, mode */ | ||
| 110 | #define DMA_MODE_READ ((DMA_MODE_SIZE_BYTE << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_BYTE << DMA_MODE_SSIZE_OFF) | DMA_SRC_SA_BIT) | ||
| 111 | /* memory to I/O, 8 bits, mode */ | ||
| 112 | #define DMA_MODE_WRITE ((DMA_MODE_SIZE_BYTE << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_BYTE << DMA_MODE_SSIZE_OFF) | DMA_DES_SA_BIT) | ||
| 113 | /* I/O to memory, 16 bits, mode */ | ||
| 114 | #define DMA_MODE_READ_WORD ((DMA_MODE_SIZE_WORD << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_WORD << DMA_MODE_SSIZE_OFF) | DMA_SRC_SA_BIT) | ||
| 115 | /* memory to I/O, 16 bits, mode */ | ||
| 116 | #define DMA_MODE_WRITE_WORD ((DMA_MODE_SIZE_WORD << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_WORD << DMA_MODE_SSIZE_OFF) | DMA_DES_SA_BIT) | ||
| 117 | /* I/O to memory, 32 bits, mode */ | ||
| 118 | #define DMA_MODE_READ_LONG ((DMA_MODE_SIZE_LONG << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_LONG << DMA_MODE_SSIZE_OFF) | DMA_SRC_SA_BIT) | ||
| 119 | /* memory to I/O, 32 bits, mode */ | ||
| 120 | #define DMA_MODE_WRITE_LONG ((DMA_MODE_SIZE_LONG << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_LONG << DMA_MODE_SSIZE_OFF) | DMA_DES_SA_BIT) | ||
| 121 | |||
| 122 | #endif /* !defined(CONFIG_M5272) */ | ||
| 123 | |||
| 124 | #if !defined(CONFIG_M5272) | ||
| 125 | /* enable/disable a specific DMA channel */ | ||
| 126 | static __inline__ void enable_dma(unsigned int dmanr) | ||
| 127 | { | ||
| 128 | volatile unsigned short *dmawp; | ||
| 129 | |||
| 130 | #ifdef DMA_DEBUG | ||
| 131 | printk("enable_dma(dmanr=%d)\n", dmanr); | ||
| 132 | #endif | ||
| 133 | |||
| 134 | dmawp = (unsigned short *) dma_base_addr[dmanr]; | ||
| 135 | dmawp[MCFDMA_DCR] |= MCFDMA_DCR_EEXT; | ||
| 136 | } | ||
| 137 | |||
| 138 | static __inline__ void disable_dma(unsigned int dmanr) | ||
| 139 | { | ||
| 140 | volatile unsigned short *dmawp; | ||
| 141 | volatile unsigned char *dmapb; | ||
| 142 | |||
| 143 | #ifdef DMA_DEBUG | ||
| 144 | printk("disable_dma(dmanr=%d)\n", dmanr); | ||
| 145 | #endif | ||
| 146 | |||
| 147 | dmawp = (unsigned short *) dma_base_addr[dmanr]; | ||
| 148 | dmapb = (unsigned char *) dma_base_addr[dmanr]; | ||
| 149 | |||
| 150 | /* Turn off external requests, and stop any DMA in progress */ | ||
| 151 | dmawp[MCFDMA_DCR] &= ~MCFDMA_DCR_EEXT; | ||
| 152 | dmapb[MCFDMA_DSR] = MCFDMA_DSR_DONE; | ||
| 153 | } | ||
| 154 | |||
| 155 | /* | ||
| 156 | * Clear the 'DMA Pointer Flip Flop'. | ||
| 157 | * Write 0 for LSB/MSB, 1 for MSB/LSB access. | ||
| 158 | * Use this once to initialize the FF to a known state. | ||
| 159 | * After that, keep track of it. :-) | ||
| 160 | * --- In order to do that, the DMA routines below should --- | ||
| 161 | * --- only be used while interrupts are disabled! --- | ||
| 162 | * | ||
| 163 | * This is a NOP for ColdFire. Provide a stub for compatibility. | ||
| 164 | */ | ||
| 165 | static __inline__ void clear_dma_ff(unsigned int dmanr) | ||
| 166 | { | ||
| 167 | } | ||
| 168 | |||
| 169 | /* set mode (above) for a specific DMA channel */ | ||
| 170 | static __inline__ void set_dma_mode(unsigned int dmanr, char mode) | ||
| 171 | { | ||
| 172 | |||
| 173 | volatile unsigned char *dmabp; | ||
| 174 | volatile unsigned short *dmawp; | ||
| 175 | |||
| 176 | #ifdef DMA_DEBUG | ||
| 177 | printk("set_dma_mode(dmanr=%d,mode=%d)\n", dmanr, mode); | ||
| 178 | #endif | ||
| 179 | |||
| 180 | dmabp = (unsigned char *) dma_base_addr[dmanr]; | ||
| 181 | dmawp = (unsigned short *) dma_base_addr[dmanr]; | ||
| 182 | |||
| 183 | // Clear config errors | ||
| 184 | dmabp[MCFDMA_DSR] = MCFDMA_DSR_DONE; | ||
| 185 | |||
| 186 | // Set command register | ||
| 187 | dmawp[MCFDMA_DCR] = | ||
| 188 | MCFDMA_DCR_INT | // Enable completion irq | ||
| 189 | MCFDMA_DCR_CS | // Force one xfer per request | ||
| 190 | MCFDMA_DCR_AA | // Enable auto alignment | ||
| 191 | // single-address-mode | ||
| 192 | ((mode & DMA_MODE_SINGLE_BIT) ? MCFDMA_DCR_SAA : 0) | | ||
| 193 | // sets s_rw (-> r/w) high if Memory to I/0 | ||
| 194 | ((mode & DMA_MODE_WRITE_BIT) ? MCFDMA_DCR_S_RW : 0) | | ||
| 195 | // Memory to I/O or I/O to Memory | ||
| 196 | ((mode & DMA_MODE_WRITE_BIT) ? MCFDMA_DCR_SINC : MCFDMA_DCR_DINC) | | ||
| 197 | // 32 bit, 16 bit or 8 bit transfers | ||
| 198 | ((mode & DMA_MODE_WORD_BIT) ? MCFDMA_DCR_SSIZE_WORD : | ||
| 199 | ((mode & DMA_MODE_LONG_BIT) ? MCFDMA_DCR_SSIZE_LONG : | ||
| 200 | MCFDMA_DCR_SSIZE_BYTE)) | | ||
| 201 | ((mode & DMA_MODE_WORD_BIT) ? MCFDMA_DCR_DSIZE_WORD : | ||
| 202 | ((mode & DMA_MODE_LONG_BIT) ? MCFDMA_DCR_DSIZE_LONG : | ||
| 203 | MCFDMA_DCR_DSIZE_BYTE)); | ||
| 204 | |||
| 205 | #ifdef DEBUG_DMA | ||
| 206 | printk("%s(%d): dmanr=%d DSR[%x]=%x DCR[%x]=%x\n", __FILE__, __LINE__, | ||
| 207 | dmanr, (int) &dmabp[MCFDMA_DSR], dmabp[MCFDMA_DSR], | ||
| 208 | (int) &dmawp[MCFDMA_DCR], dmawp[MCFDMA_DCR]); | ||
| 209 | #endif | ||
| 210 | } | ||
| 211 | |||
| 212 | /* Set transfer address for specific DMA channel */ | ||
| 213 | static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int a) | ||
| 214 | { | ||
| 215 | volatile unsigned short *dmawp; | ||
| 216 | volatile unsigned int *dmalp; | ||
| 217 | |||
| 218 | #ifdef DMA_DEBUG | ||
| 219 | printk("set_dma_addr(dmanr=%d,a=%x)\n", dmanr, a); | ||
| 220 | #endif | ||
| 221 | |||
| 222 | dmawp = (unsigned short *) dma_base_addr[dmanr]; | ||
| 223 | dmalp = (unsigned int *) dma_base_addr[dmanr]; | ||
| 224 | |||
| 225 | // Determine which address registers are used for memory/device accesses | ||
| 226 | if (dmawp[MCFDMA_DCR] & MCFDMA_DCR_SINC) { | ||
| 227 | // Source incrementing, must be memory | ||
| 228 | dmalp[MCFDMA_SAR] = a; | ||
| 229 | // Set dest address, must be device | ||
| 230 | dmalp[MCFDMA_DAR] = dma_device_address[dmanr]; | ||
| 231 | } else { | ||
| 232 | // Destination incrementing, must be memory | ||
| 233 | dmalp[MCFDMA_DAR] = a; | ||
| 234 | // Set source address, must be device | ||
| 235 | dmalp[MCFDMA_SAR] = dma_device_address[dmanr]; | ||
| 236 | } | ||
| 237 | |||
| 238 | #ifdef DEBUG_DMA | ||
| 239 | printk("%s(%d): dmanr=%d DCR[%x]=%x SAR[%x]=%08x DAR[%x]=%08x\n", | ||
| 240 | __FILE__, __LINE__, dmanr, (int) &dmawp[MCFDMA_DCR], dmawp[MCFDMA_DCR], | ||
| 241 | (int) &dmalp[MCFDMA_SAR], dmalp[MCFDMA_SAR], | ||
| 242 | (int) &dmalp[MCFDMA_DAR], dmalp[MCFDMA_DAR]); | ||
| 243 | #endif | ||
| 244 | } | ||
| 245 | |||
| 246 | /* | ||
| 247 | * Specific for Coldfire - sets device address. | ||
| 248 | * Should be called after the mode set call, and before set DMA address. | ||
| 249 | */ | ||
| 250 | static __inline__ void set_dma_device_addr(unsigned int dmanr, unsigned int a) | ||
| 251 | { | ||
| 252 | #ifdef DMA_DEBUG | ||
| 253 | printk("set_dma_device_addr(dmanr=%d,a=%x)\n", dmanr, a); | ||
| 254 | #endif | ||
| 255 | |||
| 256 | dma_device_address[dmanr] = a; | ||
| 257 | } | ||
| 258 | |||
| 259 | /* | ||
| 260 | * NOTE 2: "count" represents _bytes_. | ||
| 261 | */ | ||
| 262 | static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count) | ||
| 263 | { | ||
| 264 | volatile unsigned short *dmawp; | ||
| 265 | |||
| 266 | #ifdef DMA_DEBUG | ||
| 267 | printk("set_dma_count(dmanr=%d,count=%d)\n", dmanr, count); | ||
| 268 | #endif | ||
| 269 | |||
| 270 | dmawp = (unsigned short *) dma_base_addr[dmanr]; | ||
| 271 | dmawp[MCFDMA_BCR] = (unsigned short)count; | ||
| 272 | } | ||
| 273 | |||
| 274 | /* | ||
| 275 | * Get DMA residue count. After a DMA transfer, this | ||
| 276 | * should return zero. Reading this while a DMA transfer is | ||
| 277 | * still in progress will return unpredictable results. | ||
| 278 | * Otherwise, it returns the number of _bytes_ left to transfer. | ||
| 279 | */ | ||
| 280 | static __inline__ int get_dma_residue(unsigned int dmanr) | ||
| 281 | { | ||
| 282 | volatile unsigned short *dmawp; | ||
| 283 | unsigned short count; | ||
| 284 | |||
| 285 | #ifdef DMA_DEBUG | ||
| 286 | printk("get_dma_residue(dmanr=%d)\n", dmanr); | ||
| 287 | #endif | ||
| 288 | |||
| 289 | dmawp = (unsigned short *) dma_base_addr[dmanr]; | ||
| 290 | count = dmawp[MCFDMA_BCR]; | ||
| 291 | return((int) count); | ||
| 292 | } | ||
| 293 | #else /* CONFIG_M5272 is defined */ | ||
| 294 | |||
| 295 | /* | ||
| 296 | * The MCF5272 DMA controller is very different than the controller defined above | ||
| 297 | * in terms of register mapping. For instance, with the exception of the 16-bit | ||
| 298 | * interrupt register (IRQ#85, for reference), all of the registers are 32-bit. | ||
| 299 | * | ||
| 300 | * The big difference, however, is the lack of device-requested DMA. All modes | ||
| 301 | * are dual address transfer, and there is no 'device' setup or direction bit. | ||
| 302 | * You can DMA between a device and memory, between memory and memory, or even between | ||
| 303 | * two devices directly, with any combination of incrementing and non-incrementing | ||
| 304 | * addresses you choose. This puts a crimp in distinguishing between the 'device | ||
| 305 | * address' set up by set_dma_device_addr. | ||
| 306 | * | ||
| 307 | * Therefore, there are two options. One is to use set_dma_addr and set_dma_device_addr, | ||
| 308 | * which will act exactly as above in -- it will look to see if the source is set to | ||
| 309 | * autoincrement, and if so it will make the source use the set_dma_addr value and the | ||
| 310 | * destination the set_dma_device_addr value. Otherwise the source will be set to the | ||
| 311 | * set_dma_device_addr value and the destination will get the set_dma_addr value. | ||
| 312 | * | ||
| 313 | * The other is to use the provided set_dma_src_addr and set_dma_dest_addr functions | ||
| 314 | * and make it explicit. Depending on what you're doing, one of these two should work | ||
| 315 | * for you, but don't mix them in the same transfer setup. | ||
| 316 | */ | ||
| 317 | |||
| 318 | /* enable/disable a specific DMA channel */ | ||
| 319 | static __inline__ void enable_dma(unsigned int dmanr) | ||
| 320 | { | ||
| 321 | volatile unsigned int *dmalp; | ||
| 322 | |||
| 323 | #ifdef DMA_DEBUG | ||
| 324 | printk("enable_dma(dmanr=%d)\n", dmanr); | ||
| 325 | #endif | ||
| 326 | |||
| 327 | dmalp = (unsigned int *) dma_base_addr[dmanr]; | ||
| 328 | dmalp[MCFDMA_DMR] |= MCFDMA_DMR_EN; | ||
| 329 | } | ||
| 330 | |||
| 331 | static __inline__ void disable_dma(unsigned int dmanr) | ||
| 332 | { | ||
| 333 | volatile unsigned int *dmalp; | ||
| 334 | |||
| 335 | #ifdef DMA_DEBUG | ||
| 336 | printk("disable_dma(dmanr=%d)\n", dmanr); | ||
| 337 | #endif | ||
| 338 | |||
| 339 | dmalp = (unsigned int *) dma_base_addr[dmanr]; | ||
| 340 | |||
| 341 | /* Turn off external requests, and stop any DMA in progress */ | ||
| 342 | dmalp[MCFDMA_DMR] &= ~MCFDMA_DMR_EN; | ||
| 343 | dmalp[MCFDMA_DMR] |= MCFDMA_DMR_RESET; | ||
| 344 | } | ||
| 345 | |||
| 346 | /* | ||
| 347 | * Clear the 'DMA Pointer Flip Flop'. | ||
| 348 | * Write 0 for LSB/MSB, 1 for MSB/LSB access. | ||
| 349 | * Use this once to initialize the FF to a known state. | ||
| 350 | * After that, keep track of it. :-) | ||
| 351 | * --- In order to do that, the DMA routines below should --- | ||
| 352 | * --- only be used while interrupts are disabled! --- | ||
| 353 | * | ||
| 354 | * This is a NOP for ColdFire. Provide a stub for compatibility. | ||
| 355 | */ | ||
| 356 | static __inline__ void clear_dma_ff(unsigned int dmanr) | ||
| 357 | { | ||
| 358 | } | ||
| 359 | |||
| 360 | /* set mode (above) for a specific DMA channel */ | ||
| 361 | static __inline__ void set_dma_mode(unsigned int dmanr, char mode) | ||
| 362 | { | ||
| 363 | |||
| 364 | volatile unsigned int *dmalp; | ||
| 365 | volatile unsigned short *dmawp; | ||
| 366 | |||
| 367 | #ifdef DMA_DEBUG | ||
| 368 | printk("set_dma_mode(dmanr=%d,mode=%d)\n", dmanr, mode); | ||
| 369 | #endif | ||
| 370 | dmalp = (unsigned int *) dma_base_addr[dmanr]; | ||
| 371 | dmawp = (unsigned short *) dma_base_addr[dmanr]; | ||
| 372 | |||
| 373 | // Clear config errors | ||
| 374 | dmalp[MCFDMA_DMR] |= MCFDMA_DMR_RESET; | ||
| 375 | |||
| 376 | // Set command register | ||
| 377 | dmalp[MCFDMA_DMR] = | ||
| 378 | MCFDMA_DMR_RQM_DUAL | // Mandatory Request Mode setting | ||
| 379 | MCFDMA_DMR_DSTT_SD | // Set up addressing types; set to supervisor-data. | ||
| 380 | MCFDMA_DMR_SRCT_SD | // Set up addressing types; set to supervisor-data. | ||
| 381 | // source static-address-mode | ||
| 382 | ((mode & DMA_MODE_SRC_SA_BIT) ? MCFDMA_DMR_SRCM_SA : MCFDMA_DMR_SRCM_IA) | | ||
| 383 | // dest static-address-mode | ||
| 384 | ((mode & DMA_MODE_DES_SA_BIT) ? MCFDMA_DMR_DSTM_SA : MCFDMA_DMR_DSTM_IA) | | ||
| 385 | // burst, 32 bit, 16 bit or 8 bit transfers are separately configurable on the MCF5272 | ||
| 386 | (((mode & DMA_MODE_SSIZE_MASK) >> DMA_MODE_SSIZE_OFF) << MCFDMA_DMR_DSTS_OFF) | | ||
| 387 | (((mode & DMA_MODE_SSIZE_MASK) >> DMA_MODE_SSIZE_OFF) << MCFDMA_DMR_SRCS_OFF); | ||
| 388 | |||
| 389 | dmawp[MCFDMA_DIR] |= MCFDMA_DIR_ASCEN; /* Enable completion interrupts */ | ||
| 390 | |||
| 391 | #ifdef DEBUG_DMA | ||
| 392 | printk("%s(%d): dmanr=%d DMR[%x]=%x DIR[%x]=%x\n", __FILE__, __LINE__, | ||
| 393 | dmanr, (int) &dmalp[MCFDMA_DMR], dmabp[MCFDMA_DMR], | ||
| 394 | (int) &dmawp[MCFDMA_DIR], dmawp[MCFDMA_DIR]); | ||
| 395 | #endif | ||
| 396 | } | ||
| 397 | |||
| 398 | /* Set transfer address for specific DMA channel */ | ||
| 399 | static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int a) | ||
| 400 | { | ||
| 401 | volatile unsigned int *dmalp; | ||
| 402 | |||
| 403 | #ifdef DMA_DEBUG | ||
| 404 | printk("set_dma_addr(dmanr=%d,a=%x)\n", dmanr, a); | ||
| 405 | #endif | ||
| 406 | |||
| 407 | dmalp = (unsigned int *) dma_base_addr[dmanr]; | ||
| 408 | |||
| 409 | // Determine which address registers are used for memory/device accesses | ||
| 410 | if (dmalp[MCFDMA_DMR] & MCFDMA_DMR_SRCM) { | ||
| 411 | // Source incrementing, must be memory | ||
| 412 | dmalp[MCFDMA_DSAR] = a; | ||
| 413 | // Set dest address, must be device | ||
| 414 | dmalp[MCFDMA_DDAR] = dma_device_address[dmanr]; | ||
| 415 | } else { | ||
| 416 | // Destination incrementing, must be memory | ||
| 417 | dmalp[MCFDMA_DDAR] = a; | ||
| 418 | // Set source address, must be device | ||
| 419 | dmalp[MCFDMA_DSAR] = dma_device_address[dmanr]; | ||
| 420 | } | ||
| 421 | |||
| 422 | #ifdef DEBUG_DMA | ||
| 423 | printk("%s(%d): dmanr=%d DMR[%x]=%x SAR[%x]=%08x DAR[%x]=%08x\n", | ||
| 424 | __FILE__, __LINE__, dmanr, (int) &dmawp[MCFDMA_DMR], dmawp[MCFDMA_DMR], | ||
| 425 | (int) &dmalp[MCFDMA_DSAR], dmalp[MCFDMA_DSAR], | ||
| 426 | (int) &dmalp[MCFDMA_DDAR], dmalp[MCFDMA_DDAR]); | ||
| 427 | #endif | ||
| 428 | } | ||
| 429 | |||
| 430 | /* | ||
| 431 | * Specific for Coldfire - sets device address. | ||
| 432 | * Should be called after the mode set call, and before set DMA address. | ||
| 433 | */ | ||
| 434 | static __inline__ void set_dma_device_addr(unsigned int dmanr, unsigned int a) | ||
| 435 | { | ||
| 436 | #ifdef DMA_DEBUG | ||
| 437 | printk("set_dma_device_addr(dmanr=%d,a=%x)\n", dmanr, a); | ||
| 438 | #endif | ||
| 439 | |||
| 440 | dma_device_address[dmanr] = a; | ||
| 441 | } | ||
| 442 | |||
| 443 | /* | ||
| 444 | * NOTE 2: "count" represents _bytes_. | ||
| 445 | * | ||
| 446 | * NOTE 3: While a 32-bit register, "count" is only a maximum 24-bit value. | ||
| 447 | */ | ||
| 448 | static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count) | ||
| 449 | { | ||
| 450 | volatile unsigned int *dmalp; | ||
| 451 | |||
| 452 | #ifdef DMA_DEBUG | ||
| 453 | printk("set_dma_count(dmanr=%d,count=%d)\n", dmanr, count); | ||
| 454 | #endif | ||
| 455 | |||
| 456 | dmalp = (unsigned int *) dma_base_addr[dmanr]; | ||
| 457 | dmalp[MCFDMA_DBCR] = count; | ||
| 458 | } | ||
| 459 | |||
| 460 | /* | ||
| 461 | * Get DMA residue count. After a DMA transfer, this | ||
| 462 | * should return zero. Reading this while a DMA transfer is | ||
| 463 | * still in progress will return unpredictable results. | ||
| 464 | * Otherwise, it returns the number of _bytes_ left to transfer. | ||
| 465 | */ | ||
| 466 | static __inline__ int get_dma_residue(unsigned int dmanr) | ||
| 467 | { | ||
| 468 | volatile unsigned int *dmalp; | ||
| 469 | unsigned int count; | ||
| 470 | |||
| 471 | #ifdef DMA_DEBUG | ||
| 472 | printk("get_dma_residue(dmanr=%d)\n", dmanr); | ||
| 473 | #endif | ||
| 474 | |||
| 475 | dmalp = (unsigned int *) dma_base_addr[dmanr]; | ||
| 476 | count = dmalp[MCFDMA_DBCR]; | ||
| 477 | return(count); | ||
| 478 | } | ||
| 479 | |||
| 480 | #endif /* !defined(CONFIG_M5272) */ | ||
| 481 | #endif /* CONFIG_COLDFIRE */ | ||
| 482 | |||
| 483 | #define MAX_DMA_CHANNELS 8 | ||
| 484 | |||
| 485 | /* Don't define MAX_DMA_ADDRESS; it's useless on the m68k/coldfire and any | ||
| 486 | occurrence should be flagged as an error. */ | ||
| 487 | /* under 2.4 it is actually needed by the new bootmem allocator */ | ||
| 488 | #define MAX_DMA_ADDRESS PAGE_OFFSET | ||
| 489 | |||
| 490 | /* These are in kernel/dma.c: */ | ||
| 491 | extern int request_dma(unsigned int dmanr, const char *device_id); /* reserve a DMA channel */ | ||
| 492 | extern void free_dma(unsigned int dmanr); /* release it again */ | ||
| 493 | |||
| 494 | #endif /* _M68K_DMA_H */ | ||
diff --git a/arch/m68knommu/include/asm/elf.h b/arch/m68knommu/include/asm/elf.h deleted file mode 100644 index b8046837f384..000000000000 --- a/arch/m68knommu/include/asm/elf.h +++ /dev/null | |||
| @@ -1,110 +0,0 @@ | |||
| 1 | #ifndef __ASMm68k_ELF_H | ||
| 2 | #define __ASMm68k_ELF_H | ||
| 3 | |||
| 4 | /* | ||
| 5 | * ELF register definitions.. | ||
| 6 | */ | ||
| 7 | |||
| 8 | #include <asm/ptrace.h> | ||
| 9 | #include <asm/user.h> | ||
| 10 | |||
| 11 | /* | ||
| 12 | * 68k ELF relocation types | ||
| 13 | */ | ||
| 14 | #define R_68K_NONE 0 | ||
| 15 | #define R_68K_32 1 | ||
| 16 | #define R_68K_16 2 | ||
| 17 | #define R_68K_8 3 | ||
| 18 | #define R_68K_PC32 4 | ||
| 19 | #define R_68K_PC16 5 | ||
| 20 | #define R_68K_PC8 6 | ||
| 21 | #define R_68K_GOT32 7 | ||
| 22 | #define R_68K_GOT16 8 | ||
| 23 | #define R_68K_GOT8 9 | ||
| 24 | #define R_68K_GOT32O 10 | ||
| 25 | #define R_68K_GOT16O 11 | ||
| 26 | #define R_68K_GOT8O 12 | ||
| 27 | #define R_68K_PLT32 13 | ||
| 28 | #define R_68K_PLT16 14 | ||
| 29 | #define R_68K_PLT8 15 | ||
| 30 | #define R_68K_PLT32O 16 | ||
| 31 | #define R_68K_PLT16O 17 | ||
| 32 | #define R_68K_PLT8O 18 | ||
| 33 | #define R_68K_COPY 19 | ||
| 34 | #define R_68K_GLOB_DAT 20 | ||
| 35 | #define R_68K_JMP_SLOT 21 | ||
| 36 | #define R_68K_RELATIVE 22 | ||
| 37 | |||
| 38 | typedef unsigned long elf_greg_t; | ||
| 39 | |||
| 40 | #define ELF_NGREG (sizeof(struct user_regs_struct) / sizeof(elf_greg_t)) | ||
| 41 | typedef elf_greg_t elf_gregset_t[ELF_NGREG]; | ||
| 42 | |||
| 43 | typedef struct user_m68kfp_struct elf_fpregset_t; | ||
| 44 | |||
| 45 | /* | ||
| 46 | * This is used to ensure we don't load something for the wrong architecture. | ||
| 47 | */ | ||
| 48 | #define elf_check_arch(x) ((x)->e_machine == EM_68K) | ||
| 49 | |||
| 50 | /* | ||
| 51 | * These are used to set parameters in the core dumps. | ||
| 52 | */ | ||
| 53 | #define ELF_CLASS ELFCLASS32 | ||
| 54 | #define ELF_DATA ELFDATA2MSB | ||
| 55 | #define ELF_ARCH EM_68K | ||
| 56 | |||
| 57 | /* For SVR4/m68k the function pointer to be registered with `atexit' is | ||
| 58 | passed in %a1. Although my copy of the ABI has no such statement, it | ||
| 59 | is actually used on ASV. */ | ||
| 60 | #define ELF_PLAT_INIT(_r, load_addr) _r->a1 = 0 | ||
| 61 | |||
| 62 | #define USE_ELF_CORE_DUMP | ||
| 63 | #define ELF_EXEC_PAGESIZE 4096 | ||
| 64 | |||
| 65 | /* This is the location that an ET_DYN program is loaded if exec'ed. Typical | ||
| 66 | use of this is to invoke "./ld.so someprog" to test out a new version of | ||
| 67 | the loader. We need to make sure that it is out of the way of the program | ||
| 68 | that it will "exec", and that there is sufficient room for the brk. */ | ||
| 69 | |||
| 70 | #define ELF_ET_DYN_BASE 0xD0000000UL | ||
| 71 | |||
| 72 | #define ELF_CORE_COPY_REGS(pr_reg, regs) \ | ||
| 73 | /* Bleech. */ \ | ||
| 74 | pr_reg[0] = regs->d1; \ | ||
| 75 | pr_reg[1] = regs->d2; \ | ||
| 76 | pr_reg[2] = regs->d3; \ | ||
| 77 | pr_reg[3] = regs->d4; \ | ||
| 78 | pr_reg[4] = regs->d5; \ | ||
| 79 | pr_reg[7] = regs->a0; \ | ||
| 80 | pr_reg[8] = regs->a1; \ | ||
| 81 | pr_reg[14] = regs->d0; \ | ||
| 82 | pr_reg[15] = rdusp(); \ | ||
| 83 | pr_reg[16] = 0 /* regs->orig_d0 */; \ | ||
| 84 | pr_reg[17] = regs->sr; \ | ||
| 85 | pr_reg[18] = regs->pc; \ | ||
| 86 | /* pr_reg[19] = (regs->format << 12) | regs->vector; */ \ | ||
| 87 | { \ | ||
| 88 | struct switch_stack *sw = ((struct switch_stack *)regs) - 1; \ | ||
| 89 | pr_reg[5] = sw->d6; \ | ||
| 90 | pr_reg[6] = sw->d7; \ | ||
| 91 | pr_reg[10] = sw->a3; \ | ||
| 92 | pr_reg[11] = sw->a4; \ | ||
| 93 | pr_reg[12] = sw->a5; \ | ||
| 94 | pr_reg[13] = sw->a6; \ | ||
| 95 | } | ||
| 96 | |||
| 97 | /* This yields a mask that user programs can use to figure out what | ||
| 98 | instruction set this cpu supports. */ | ||
| 99 | |||
| 100 | #define ELF_HWCAP (0) | ||
| 101 | |||
| 102 | /* This yields a string that ld.so will use to load implementation | ||
| 103 | specific libraries for optimization. This is more specific in | ||
| 104 | intent than poking at uname or /proc/cpuinfo. */ | ||
| 105 | |||
| 106 | #define ELF_PLATFORM (NULL) | ||
| 107 | |||
| 108 | #define SET_PERSONALITY(ex) set_personality(PER_LINUX) | ||
| 109 | |||
| 110 | #endif | ||
diff --git a/arch/m68knommu/include/asm/elia.h b/arch/m68knommu/include/asm/elia.h deleted file mode 100644 index e037d4e2de33..000000000000 --- a/arch/m68knommu/include/asm/elia.h +++ /dev/null | |||
| @@ -1,41 +0,0 @@ | |||
| 1 | /****************************************************************************/ | ||
| 2 | |||
| 3 | /* | ||
| 4 | * elia.h -- Lineo (formerly Moreton Bay) eLIA platform support. | ||
| 5 | * | ||
| 6 | * (C) Copyright 1999-2000, Moreton Bay (www.moreton.com.au) | ||
| 7 | * (C) Copyright 1999-2000, Lineo (www.lineo.com) | ||
| 8 | */ | ||
| 9 | |||
| 10 | /****************************************************************************/ | ||
| 11 | #ifndef elia_h | ||
| 12 | #define elia_h | ||
| 13 | /****************************************************************************/ | ||
| 14 | |||
| 15 | #include <asm/coldfire.h> | ||
| 16 | |||
| 17 | #ifdef CONFIG_eLIA | ||
| 18 | |||
| 19 | /* | ||
| 20 | * The serial port DTR and DCD lines are also on the Parallel I/O | ||
| 21 | * as well, so define those too. | ||
| 22 | */ | ||
| 23 | |||
| 24 | #define eLIA_DCD1 0x0001 | ||
| 25 | #define eLIA_DCD0 0x0002 | ||
| 26 | #define eLIA_DTR1 0x0004 | ||
| 27 | #define eLIA_DTR0 0x0008 | ||
| 28 | |||
| 29 | #define eLIA_PCIRESET 0x0020 | ||
| 30 | |||
| 31 | /* | ||
| 32 | * Kernel macros to set and unset the LEDs. | ||
| 33 | */ | ||
| 34 | #ifndef __ASSEMBLY__ | ||
| 35 | extern unsigned short ppdata; | ||
| 36 | #endif /* __ASSEMBLY__ */ | ||
| 37 | |||
| 38 | #endif /* CONFIG_eLIA */ | ||
| 39 | |||
| 40 | /****************************************************************************/ | ||
| 41 | #endif /* elia_h */ | ||
diff --git a/arch/m68knommu/include/asm/emergency-restart.h b/arch/m68knommu/include/asm/emergency-restart.h deleted file mode 100644 index 108d8c48e42e..000000000000 --- a/arch/m68knommu/include/asm/emergency-restart.h +++ /dev/null | |||
| @@ -1,6 +0,0 @@ | |||
| 1 | #ifndef _ASM_EMERGENCY_RESTART_H | ||
| 2 | #define _ASM_EMERGENCY_RESTART_H | ||
| 3 | |||
| 4 | #include <asm-generic/emergency-restart.h> | ||
| 5 | |||
| 6 | #endif /* _ASM_EMERGENCY_RESTART_H */ | ||
diff --git a/arch/m68knommu/include/asm/entry.h b/arch/m68knommu/include/asm/entry.h deleted file mode 100644 index c2553d26273d..000000000000 --- a/arch/m68knommu/include/asm/entry.h +++ /dev/null | |||
| @@ -1,182 +0,0 @@ | |||
| 1 | #ifndef __M68KNOMMU_ENTRY_H | ||
| 2 | #define __M68KNOMMU_ENTRY_H | ||
| 3 | |||
| 4 | #include <asm/setup.h> | ||
| 5 | #include <asm/page.h> | ||
| 6 | |||
| 7 | /* | ||
| 8 | * Stack layout in 'ret_from_exception': | ||
| 9 | * | ||
| 10 | * This allows access to the syscall arguments in registers d1-d5 | ||
| 11 | * | ||
| 12 | * 0(sp) - d1 | ||
| 13 | * 4(sp) - d2 | ||
| 14 | * 8(sp) - d3 | ||
| 15 | * C(sp) - d4 | ||
| 16 | * 10(sp) - d5 | ||
| 17 | * 14(sp) - a0 | ||
| 18 | * 18(sp) - a1 | ||
| 19 | * 1C(sp) - a2 | ||
| 20 | * 20(sp) - d0 | ||
| 21 | * 24(sp) - orig_d0 | ||
| 22 | * 28(sp) - stack adjustment | ||
| 23 | * 2C(sp) - [ sr ] [ format & vector ] | ||
| 24 | * 2E(sp) - [ pc-hiword ] [ sr ] | ||
| 25 | * 30(sp) - [ pc-loword ] [ pc-hiword ] | ||
| 26 | * 32(sp) - [ format & vector ] [ pc-loword ] | ||
| 27 | * ^^^^^^^^^^^^^^^^^ ^^^^^^^^^^^^^^^^^ | ||
| 28 | * M68K COLDFIRE | ||
| 29 | */ | ||
| 30 | |||
| 31 | #define ALLOWINT 0xf8ff | ||
| 32 | |||
| 33 | #ifdef __ASSEMBLY__ | ||
| 34 | |||
| 35 | /* process bits for task_struct.flags */ | ||
| 36 | PF_TRACESYS_OFF = 3 | ||
| 37 | PF_TRACESYS_BIT = 5 | ||
| 38 | PF_PTRACED_OFF = 3 | ||
| 39 | PF_PTRACED_BIT = 4 | ||
| 40 | PF_DTRACE_OFF = 1 | ||
| 41 | PF_DTRACE_BIT = 5 | ||
| 42 | |||
| 43 | LENOSYS = 38 | ||
| 44 | |||
| 45 | #define SWITCH_STACK_SIZE (6*4+4) /* Includes return address */ | ||
| 46 | |||
| 47 | /* | ||
| 48 | * This defines the normal kernel pt-regs layout. | ||
| 49 | * | ||
| 50 | * regs are a2-a6 and d6-d7 preserved by C code | ||
| 51 | * the kernel doesn't mess with usp unless it needs to | ||
| 52 | */ | ||
| 53 | |||
| 54 | #ifdef CONFIG_COLDFIRE | ||
| 55 | /* | ||
| 56 | * This is made a little more tricky on the ColdFire. There is no | ||
| 57 | * separate kernel and user stack pointers. Need to artificially | ||
| 58 | * construct a usp in software... When doing this we need to disable | ||
| 59 | * interrupts, otherwise bad things could happen. | ||
| 60 | */ | ||
| 61 | .macro SAVE_ALL | ||
| 62 | move #0x2700,%sr /* disable intrs */ | ||
| 63 | btst #5,%sp@(2) /* from user? */ | ||
| 64 | bnes 6f /* no, skip */ | ||
| 65 | movel %sp,sw_usp /* save user sp */ | ||
| 66 | addql #8,sw_usp /* remove exception */ | ||
| 67 | movel sw_ksp,%sp /* kernel sp */ | ||
| 68 | subql #8,%sp /* room for exception */ | ||
| 69 | clrl %sp@- /* stkadj */ | ||
| 70 | movel %d0,%sp@- /* orig d0 */ | ||
| 71 | movel %d0,%sp@- /* d0 */ | ||
| 72 | lea %sp@(-32),%sp /* space for 8 regs */ | ||
| 73 | moveml %d1-%d5/%a0-%a2,%sp@ | ||
| 74 | movel sw_usp,%a0 /* get usp */ | ||
| 75 | movel %a0@-,%sp@(PT_PC) /* copy exception program counter */ | ||
| 76 | movel %a0@-,%sp@(PT_FORMATVEC)/* copy exception format/vector/sr */ | ||
| 77 | bra 7f | ||
| 78 | 6: | ||
| 79 | clrl %sp@- /* stkadj */ | ||
| 80 | movel %d0,%sp@- /* orig d0 */ | ||
| 81 | movel %d0,%sp@- /* d0 */ | ||
| 82 | lea %sp@(-32),%sp /* space for 8 regs */ | ||
| 83 | moveml %d1-%d5/%a0-%a2,%sp@ | ||
| 84 | 7: | ||
| 85 | .endm | ||
| 86 | |||
| 87 | .macro RESTORE_ALL | ||
| 88 | btst #5,%sp@(PT_SR) /* going user? */ | ||
| 89 | bnes 8f /* no, skip */ | ||
| 90 | move #0x2700,%sr /* disable intrs */ | ||
| 91 | movel sw_usp,%a0 /* get usp */ | ||
| 92 | movel %sp@(PT_PC),%a0@- /* copy exception program counter */ | ||
| 93 | movel %sp@(PT_FORMATVEC),%a0@-/* copy exception format/vector/sr */ | ||
| 94 | moveml %sp@,%d1-%d5/%a0-%a2 | ||
| 95 | lea %sp@(32),%sp /* space for 8 regs */ | ||
| 96 | movel %sp@+,%d0 | ||
| 97 | addql #4,%sp /* orig d0 */ | ||
| 98 | addl %sp@+,%sp /* stkadj */ | ||
| 99 | addql #8,%sp /* remove exception */ | ||
| 100 | movel %sp,sw_ksp /* save ksp */ | ||
| 101 | subql #8,sw_usp /* set exception */ | ||
| 102 | movel sw_usp,%sp /* restore usp */ | ||
| 103 | rte | ||
| 104 | 8: | ||
| 105 | moveml %sp@,%d1-%d5/%a0-%a2 | ||
| 106 | lea %sp@(32),%sp /* space for 8 regs */ | ||
| 107 | movel %sp@+,%d0 | ||
| 108 | addql #4,%sp /* orig d0 */ | ||
| 109 | addl %sp@+,%sp /* stkadj */ | ||
| 110 | rte | ||
| 111 | .endm | ||
| 112 | |||
| 113 | /* | ||
| 114 | * Quick exception save, use current stack only. | ||
| 115 | */ | ||
| 116 | .macro SAVE_LOCAL | ||
| 117 | move #0x2700,%sr /* disable intrs */ | ||
| 118 | clrl %sp@- /* stkadj */ | ||
| 119 | movel %d0,%sp@- /* orig d0 */ | ||
| 120 | movel %d0,%sp@- /* d0 */ | ||
| 121 | lea %sp@(-32),%sp /* space for 8 regs */ | ||
| 122 | moveml %d1-%d5/%a0-%a2,%sp@ | ||
| 123 | .endm | ||
| 124 | |||
| 125 | .macro RESTORE_LOCAL | ||
| 126 | moveml %sp@,%d1-%d5/%a0-%a2 | ||
| 127 | lea %sp@(32),%sp /* space for 8 regs */ | ||
| 128 | movel %sp@+,%d0 | ||
| 129 | addql #4,%sp /* orig d0 */ | ||
| 130 | addl %sp@+,%sp /* stkadj */ | ||
| 131 | rte | ||
| 132 | .endm | ||
| 133 | |||
| 134 | .macro SAVE_SWITCH_STACK | ||
| 135 | lea %sp@(-24),%sp /* 6 regs */ | ||
| 136 | moveml %a3-%a6/%d6-%d7,%sp@ | ||
| 137 | .endm | ||
| 138 | |||
| 139 | .macro RESTORE_SWITCH_STACK | ||
| 140 | moveml %sp@,%a3-%a6/%d6-%d7 | ||
| 141 | lea %sp@(24),%sp /* 6 regs */ | ||
| 142 | .endm | ||
| 143 | |||
| 144 | /* | ||
| 145 | * Software copy of the user and kernel stack pointers... Ugh... | ||
| 146 | * Need these to get around ColdFire not having separate kernel | ||
| 147 | * and user stack pointers. | ||
| 148 | */ | ||
| 149 | .globl sw_usp | ||
| 150 | .globl sw_ksp | ||
| 151 | |||
| 152 | #else /* !CONFIG_COLDFIRE */ | ||
| 153 | |||
| 154 | /* | ||
| 155 | * Standard 68k interrupt entry and exit macros. | ||
| 156 | */ | ||
| 157 | .macro SAVE_ALL | ||
| 158 | clrl %sp@- /* stkadj */ | ||
| 159 | movel %d0,%sp@- /* orig d0 */ | ||
| 160 | movel %d0,%sp@- /* d0 */ | ||
| 161 | moveml %d1-%d5/%a0-%a2,%sp@- | ||
| 162 | .endm | ||
| 163 | |||
| 164 | .macro RESTORE_ALL | ||
| 165 | moveml %sp@+,%a0-%a2/%d1-%d5 | ||
| 166 | movel %sp@+,%d0 | ||
| 167 | addql #4,%sp /* orig d0 */ | ||
| 168 | addl %sp@+,%sp /* stkadj */ | ||
| 169 | rte | ||
| 170 | .endm | ||
| 171 | |||
| 172 | .macro SAVE_SWITCH_STACK | ||
| 173 | moveml %a3-%a6/%d6-%d7,%sp@- | ||
| 174 | .endm | ||
| 175 | |||
| 176 | .macro RESTORE_SWITCH_STACK | ||
| 177 | moveml %sp@+,%a3-%a6/%d6-%d7 | ||
| 178 | .endm | ||
| 179 | |||
| 180 | #endif /* !CONFIG_COLDFIRE */ | ||
| 181 | #endif /* __ASSEMBLY__ */ | ||
| 182 | #endif /* __M68KNOMMU_ENTRY_H */ | ||
diff --git a/arch/m68knommu/include/asm/errno.h b/arch/m68knommu/include/asm/errno.h deleted file mode 100644 index 7e8c22b9a5e6..000000000000 --- a/arch/m68knommu/include/asm/errno.h +++ /dev/null | |||
| @@ -1 +0,0 @@ | |||
| 1 | #include <asm-m68k/errno.h> | ||
diff --git a/arch/m68knommu/include/asm/fb.h b/arch/m68knommu/include/asm/fb.h deleted file mode 100644 index c7df38030992..000000000000 --- a/arch/m68knommu/include/asm/fb.h +++ /dev/null | |||
| @@ -1,12 +0,0 @@ | |||
| 1 | #ifndef _ASM_FB_H_ | ||
| 2 | #define _ASM_FB_H_ | ||
| 3 | #include <linux/fb.h> | ||
| 4 | |||
| 5 | #define fb_pgprotect(...) do {} while (0) | ||
| 6 | |||
| 7 | static inline int fb_is_primary_device(struct fb_info *info) | ||
| 8 | { | ||
| 9 | return 0; | ||
| 10 | } | ||
| 11 | |||
| 12 | #endif /* _ASM_FB_H_ */ | ||
diff --git a/arch/m68knommu/include/asm/fcntl.h b/arch/m68knommu/include/asm/fcntl.h deleted file mode 100644 index f6a552cda4cd..000000000000 --- a/arch/m68knommu/include/asm/fcntl.h +++ /dev/null | |||
| @@ -1 +0,0 @@ | |||
| 1 | #include <asm-m68k/fcntl.h> | ||
diff --git a/arch/m68knommu/include/asm/flat.h b/arch/m68knommu/include/asm/flat.h deleted file mode 100644 index 814b5174a8e0..000000000000 --- a/arch/m68knommu/include/asm/flat.h +++ /dev/null | |||
| @@ -1,17 +0,0 @@ | |||
| 1 | /* | ||
| 2 | * include/asm-m68knommu/flat.h -- uClinux flat-format executables | ||
| 3 | */ | ||
| 4 | |||
| 5 | #ifndef __M68KNOMMU_FLAT_H__ | ||
| 6 | #define __M68KNOMMU_FLAT_H__ | ||
| 7 | |||
| 8 | #define flat_stack_align(sp) /* nothing needed */ | ||
| 9 | #define flat_argvp_envp_on_stack() 1 | ||
| 10 | #define flat_old_ram_flag(flags) (flags) | ||
| 11 | #define flat_reloc_valid(reloc, size) ((reloc) <= (size)) | ||
| 12 | #define flat_get_addr_from_rp(rp, relval, flags, p) get_unaligned(rp) | ||
| 13 | #define flat_put_addr_at_rp(rp, val, relval) put_unaligned(val,rp) | ||
| 14 | #define flat_get_relocate_addr(rel) (rel) | ||
| 15 | #define flat_set_persistent(relval, p) 0 | ||
| 16 | |||
| 17 | #endif /* __M68KNOMMU_FLAT_H__ */ | ||
diff --git a/arch/m68knommu/include/asm/fpu.h b/arch/m68knommu/include/asm/fpu.h deleted file mode 100644 index b16b2e4fca2a..000000000000 --- a/arch/m68knommu/include/asm/fpu.h +++ /dev/null | |||
| @@ -1,21 +0,0 @@ | |||
| 1 | #ifndef __M68KNOMMU_FPU_H | ||
| 2 | #define __M68KNOMMU_FPU_H | ||
| 3 | |||
| 4 | |||
| 5 | /* | ||
| 6 | * MAX floating point unit state size (FSAVE/FRESTORE) | ||
| 7 | */ | ||
| 8 | #if defined(CONFIG_M68020) || defined(CONFIG_M68030) | ||
| 9 | #define FPSTATESIZE (216/sizeof(unsigned char)) | ||
| 10 | #elif defined(CONFIG_M68040) | ||
| 11 | #define FPSTATESIZE (96/sizeof(unsigned char)) | ||
| 12 | #elif defined(CONFIG_M68KFPU_EMU) | ||
| 13 | #define FPSTATESIZE (28/sizeof(unsigned char)) | ||
| 14 | #elif defined(CONFIG_M68060) | ||
| 15 | #define FPSTATESIZE (12/sizeof(unsigned char)) | ||
| 16 | #else | ||
| 17 | /* Assume no FP unit present then... */ | ||
| 18 | #define FPSTATESIZE (2) /* dummy size */ | ||
| 19 | #endif | ||
| 20 | |||
| 21 | #endif /* __M68K_FPU_H */ | ||
diff --git a/arch/m68knommu/include/asm/futex.h b/arch/m68knommu/include/asm/futex.h deleted file mode 100644 index 6a332a9f099c..000000000000 --- a/arch/m68knommu/include/asm/futex.h +++ /dev/null | |||
| @@ -1,6 +0,0 @@ | |||
| 1 | #ifndef _ASM_FUTEX_H | ||
| 2 | #define _ASM_FUTEX_H | ||
| 3 | |||
| 4 | #include <asm-generic/futex.h> | ||
| 5 | |||
| 6 | #endif | ||
diff --git a/arch/m68knommu/include/asm/hardirq.h b/arch/m68knommu/include/asm/hardirq.h deleted file mode 100644 index bfad28149a49..000000000000 --- a/arch/m68knommu/include/asm/hardirq.h +++ /dev/null | |||
| @@ -1,27 +0,0 @@ | |||
| 1 | #ifndef __M68K_HARDIRQ_H | ||
| 2 | #define __M68K_HARDIRQ_H | ||
| 3 | |||
| 4 | #include <linux/cache.h> | ||
| 5 | #include <linux/threads.h> | ||
| 6 | #include <asm/irq.h> | ||
| 7 | |||
| 8 | typedef struct { | ||
| 9 | unsigned int __softirq_pending; | ||
| 10 | } ____cacheline_aligned irq_cpustat_t; | ||
| 11 | |||
| 12 | #include <linux/irq_cpustat.h> /* Standard mappings for irq_cpustat_t above */ | ||
| 13 | |||
| 14 | #define HARDIRQ_BITS 8 | ||
| 15 | |||
| 16 | /* | ||
| 17 | * The hardirq mask has to be large enough to have | ||
| 18 | * space for potentially all IRQ sources in the system | ||
| 19 | * nesting on a single CPU: | ||
| 20 | */ | ||
| 21 | #if (1 << HARDIRQ_BITS) < NR_IRQS | ||
| 22 | # error HARDIRQ_BITS is too low! | ||
| 23 | #endif | ||
| 24 | |||
| 25 | void ack_bad_irq(unsigned int irq); | ||
| 26 | |||
| 27 | #endif /* __M68K_HARDIRQ_H */ | ||
diff --git a/arch/m68knommu/include/asm/hw_irq.h b/arch/m68knommu/include/asm/hw_irq.h deleted file mode 100644 index f3ec9e5ae049..000000000000 --- a/arch/m68knommu/include/asm/hw_irq.h +++ /dev/null | |||
| @@ -1,4 +0,0 @@ | |||
| 1 | #ifndef __M68KNOMMU_HW_IRQ_H__ | ||
| 2 | #define __M68KNOMMU_HW_IRQ_H__ | ||
| 3 | |||
| 4 | #endif /* __M68KNOMMU_HW_IRQ_H__ */ | ||
diff --git a/arch/m68knommu/include/asm/hwtest.h b/arch/m68knommu/include/asm/hwtest.h deleted file mode 100644 index 700626a1b1bf..000000000000 --- a/arch/m68knommu/include/asm/hwtest.h +++ /dev/null | |||
| @@ -1 +0,0 @@ | |||
| 1 | #include <asm-m68k/hwtest.h> | ||
diff --git a/arch/m68knommu/include/asm/io.h b/arch/m68knommu/include/asm/io.h deleted file mode 100644 index 6adef1ee2082..000000000000 --- a/arch/m68knommu/include/asm/io.h +++ /dev/null | |||
| @@ -1,194 +0,0 @@ | |||
| 1 | #ifndef _M68KNOMMU_IO_H | ||
| 2 | #define _M68KNOMMU_IO_H | ||
| 3 | |||
| 4 | #ifdef __KERNEL__ | ||
| 5 | |||
| 6 | |||
| 7 | /* | ||
| 8 | * These are for ISA/PCI shared memory _only_ and should never be used | ||
| 9 | * on any other type of memory, including Zorro memory. They are meant to | ||
| 10 | * access the bus in the bus byte order which is little-endian!. | ||
| 11 | * | ||
| 12 | * readX/writeX() are used to access memory mapped devices. On some | ||
| 13 | * architectures the memory mapped IO stuff needs to be accessed | ||
| 14 | * differently. On the m68k architecture, we just read/write the | ||
| 15 | * memory location directly. | ||
| 16 | */ | ||
| 17 | /* ++roman: The assignments to temp. vars avoid that gcc sometimes generates | ||
| 18 | * two accesses to memory, which may be undesireable for some devices. | ||
| 19 | */ | ||
| 20 | |||
| 21 | /* | ||
| 22 | * swap functions are sometimes needed to interface little-endian hardware | ||
| 23 | */ | ||
| 24 | static inline unsigned short _swapw(volatile unsigned short v) | ||
| 25 | { | ||
| 26 | return ((v << 8) | (v >> 8)); | ||
| 27 | } | ||
| 28 | |||
| 29 | static inline unsigned int _swapl(volatile unsigned long v) | ||
| 30 | { | ||
| 31 | return ((v << 24) | ((v & 0xff00) << 8) | ((v & 0xff0000) >> 8) | (v >> 24)); | ||
| 32 | } | ||
| 33 | |||
| 34 | #define readb(addr) \ | ||
| 35 | ({ unsigned char __v = (*(volatile unsigned char *) (addr)); __v; }) | ||
| 36 | #define readw(addr) \ | ||
| 37 | ({ unsigned short __v = (*(volatile unsigned short *) (addr)); __v; }) | ||
| 38 | #define readl(addr) \ | ||
| 39 | ({ unsigned int __v = (*(volatile unsigned int *) (addr)); __v; }) | ||
| 40 | |||
| 41 | #define readb_relaxed(addr) readb(addr) | ||
| 42 | #define readw_relaxed(addr) readw(addr) | ||
| 43 | #define readl_relaxed(addr) readl(addr) | ||
| 44 | |||
| 45 | #define writeb(b,addr) (void)((*(volatile unsigned char *) (addr)) = (b)) | ||
| 46 | #define writew(b,addr) (void)((*(volatile unsigned short *) (addr)) = (b)) | ||
| 47 | #define writel(b,addr) (void)((*(volatile unsigned int *) (addr)) = (b)) | ||
| 48 | |||
| 49 | #define __raw_readb readb | ||
| 50 | #define __raw_readw readw | ||
| 51 | #define __raw_readl readl | ||
| 52 | #define __raw_writeb writeb | ||
| 53 | #define __raw_writew writew | ||
| 54 | #define __raw_writel writel | ||
| 55 | |||
| 56 | static inline void io_outsb(unsigned int addr, void *buf, int len) | ||
| 57 | { | ||
| 58 | volatile unsigned char *ap = (volatile unsigned char *) addr; | ||
| 59 | unsigned char *bp = (unsigned char *) buf; | ||
| 60 | while (len--) | ||
| 61 | *ap = *bp++; | ||
| 62 | } | ||
| 63 | |||
| 64 | static inline void io_outsw(unsigned int addr, void *buf, int len) | ||
| 65 | { | ||
| 66 | volatile unsigned short *ap = (volatile unsigned short *) addr; | ||
| 67 | unsigned short *bp = (unsigned short *) buf; | ||
| 68 | while (len--) | ||
| 69 | *ap = _swapw(*bp++); | ||
| 70 | } | ||
| 71 | |||
| 72 | static inline void io_outsl(unsigned int addr, void *buf, int len) | ||
| 73 | { | ||
| 74 | volatile unsigned int *ap = (volatile unsigned int *) addr; | ||
| 75 | unsigned int *bp = (unsigned int *) buf; | ||
| 76 | while (len--) | ||
| 77 | *ap = _swapl(*bp++); | ||
| 78 | } | ||
| 79 | |||
| 80 | static inline void io_insb(unsigned int addr, void *buf, int len) | ||
| 81 | { | ||
| 82 | volatile unsigned char *ap = (volatile unsigned char *) addr; | ||
| 83 | unsigned char *bp = (unsigned char *) buf; | ||
| 84 | while (len--) | ||
| 85 | *bp++ = *ap; | ||
| 86 | } | ||
| 87 | |||
| 88 | static inline void io_insw(unsigned int addr, void *buf, int len) | ||
| 89 | { | ||
| 90 | volatile unsigned short *ap = (volatile unsigned short *) addr; | ||
| 91 | unsigned short *bp = (unsigned short *) buf; | ||
| 92 | while (len--) | ||
| 93 | *bp++ = _swapw(*ap); | ||
| 94 | } | ||
| 95 | |||
| 96 | static inline void io_insl(unsigned int addr, void *buf, int len) | ||
| 97 | { | ||
| 98 | volatile unsigned int *ap = (volatile unsigned int *) addr; | ||
| 99 | unsigned int *bp = (unsigned int *) buf; | ||
| 100 | while (len--) | ||
| 101 | *bp++ = _swapl(*ap); | ||
| 102 | } | ||
| 103 | |||
| 104 | #define mmiowb() | ||
| 105 | |||
| 106 | /* | ||
| 107 | * make the short names macros so specific devices | ||
| 108 | * can override them as required | ||
| 109 | */ | ||
| 110 | |||
| 111 | #define memset_io(a,b,c) memset((void *)(a),(b),(c)) | ||
| 112 | #define memcpy_fromio(a,b,c) memcpy((a),(void *)(b),(c)) | ||
| 113 | #define memcpy_toio(a,b,c) memcpy((void *)(a),(b),(c)) | ||
| 114 | |||
| 115 | #define inb(addr) readb(addr) | ||
| 116 | #define inw(addr) readw(addr) | ||
| 117 | #define inl(addr) readl(addr) | ||
| 118 | #define outb(x,addr) ((void) writeb(x,addr)) | ||
| 119 | #define outw(x,addr) ((void) writew(x,addr)) | ||
| 120 | #define outl(x,addr) ((void) writel(x,addr)) | ||
| 121 | |||
| 122 | #define inb_p(addr) inb(addr) | ||
| 123 | #define inw_p(addr) inw(addr) | ||
| 124 | #define inl_p(addr) inl(addr) | ||
| 125 | #define outb_p(x,addr) outb(x,addr) | ||
| 126 | #define outw_p(x,addr) outw(x,addr) | ||
| 127 | #define outl_p(x,addr) outl(x,addr) | ||
| 128 | |||
| 129 | #define outsb(a,b,l) io_outsb(a,b,l) | ||
| 130 | #define outsw(a,b,l) io_outsw(a,b,l) | ||
| 131 | #define outsl(a,b,l) io_outsl(a,b,l) | ||
| 132 | |||
| 133 | #define insb(a,b,l) io_insb(a,b,l) | ||
| 134 | #define insw(a,b,l) io_insw(a,b,l) | ||
| 135 | #define insl(a,b,l) io_insl(a,b,l) | ||
| 136 | |||
| 137 | #define IO_SPACE_LIMIT 0xffff | ||
| 138 | |||
| 139 | |||
| 140 | /* Values for nocacheflag and cmode */ | ||
| 141 | #define IOMAP_FULL_CACHING 0 | ||
| 142 | #define IOMAP_NOCACHE_SER 1 | ||
| 143 | #define IOMAP_NOCACHE_NONSER 2 | ||
| 144 | #define IOMAP_WRITETHROUGH 3 | ||
| 145 | |||
| 146 | extern void *__ioremap(unsigned long physaddr, unsigned long size, int cacheflag); | ||
| 147 | extern void __iounmap(void *addr, unsigned long size); | ||
| 148 | |||
| 149 | static inline void *ioremap(unsigned long physaddr, unsigned long size) | ||
| 150 | { | ||
| 151 | return __ioremap(physaddr, size, IOMAP_NOCACHE_SER); | ||
| 152 | } | ||
| 153 | static inline void *ioremap_nocache(unsigned long physaddr, unsigned long size) | ||
| 154 | { | ||
| 155 | return __ioremap(physaddr, size, IOMAP_NOCACHE_SER); | ||
| 156 | } | ||
| 157 | static inline void *ioremap_writethrough(unsigned long physaddr, unsigned long size) | ||
| 158 | { | ||
| 159 | return __ioremap(physaddr, size, IOMAP_WRITETHROUGH); | ||
| 160 | } | ||
| 161 | static inline void *ioremap_fullcache(unsigned long physaddr, unsigned long size) | ||
| 162 | { | ||
| 163 | return __ioremap(physaddr, size, IOMAP_FULL_CACHING); | ||
| 164 | } | ||
| 165 | |||
| 166 | extern void iounmap(void *addr); | ||
| 167 | |||
| 168 | /* Pages to physical address... */ | ||
| 169 | #define page_to_phys(page) ((page - mem_map) << PAGE_SHIFT) | ||
| 170 | #define page_to_bus(page) ((page - mem_map) << PAGE_SHIFT) | ||
| 171 | |||
| 172 | /* | ||
| 173 | * Macros used for converting between virtual and physical mappings. | ||
| 174 | */ | ||
| 175 | #define phys_to_virt(vaddr) ((void *) (vaddr)) | ||
| 176 | #define virt_to_phys(vaddr) ((unsigned long) (vaddr)) | ||
| 177 | |||
| 178 | #define virt_to_bus virt_to_phys | ||
| 179 | #define bus_to_virt phys_to_virt | ||
| 180 | |||
| 181 | /* | ||
| 182 | * Convert a physical pointer to a virtual kernel pointer for /dev/mem | ||
| 183 | * access | ||
| 184 | */ | ||
| 185 | #define xlate_dev_mem_ptr(p) __va(p) | ||
| 186 | |||
| 187 | /* | ||
| 188 | * Convert a virtual cached pointer to an uncached pointer | ||
| 189 | */ | ||
| 190 | #define xlate_dev_kmem_ptr(p) p | ||
| 191 | |||
| 192 | #endif /* __KERNEL__ */ | ||
| 193 | |||
| 194 | #endif /* _M68KNOMMU_IO_H */ | ||
diff --git a/arch/m68knommu/include/asm/ioctl.h b/arch/m68knommu/include/asm/ioctl.h deleted file mode 100644 index b279fe06dfe5..000000000000 --- a/arch/m68knommu/include/asm/ioctl.h +++ /dev/null | |||
| @@ -1 +0,0 @@ | |||
| 1 | #include <asm-generic/ioctl.h> | ||
diff --git a/arch/m68knommu/include/asm/ioctls.h b/arch/m68knommu/include/asm/ioctls.h deleted file mode 100644 index 0b1eb4d85059..000000000000 --- a/arch/m68knommu/include/asm/ioctls.h +++ /dev/null | |||
| @@ -1 +0,0 @@ | |||
| 1 | #include <asm-m68k/ioctls.h> | ||
diff --git a/arch/m68knommu/include/asm/ipcbuf.h b/arch/m68knommu/include/asm/ipcbuf.h deleted file mode 100644 index e4a7be6dd706..000000000000 --- a/arch/m68knommu/include/asm/ipcbuf.h +++ /dev/null | |||
| @@ -1 +0,0 @@ | |||
| 1 | #include <asm-m68k/ipcbuf.h> | ||
diff --git a/arch/m68knommu/include/asm/irq.h b/arch/m68knommu/include/asm/irq.h deleted file mode 100644 index 9373c31ac87d..000000000000 --- a/arch/m68knommu/include/asm/irq.h +++ /dev/null | |||
| @@ -1,26 +0,0 @@ | |||
| 1 | #ifndef _M68KNOMMU_IRQ_H_ | ||
| 2 | #define _M68KNOMMU_IRQ_H_ | ||
| 3 | |||
| 4 | #ifdef CONFIG_COLDFIRE | ||
| 5 | /* | ||
| 6 | * On the ColdFire we keep track of all vectors. That way drivers | ||
| 7 | * can register whatever vector number they wish, and we can deal | ||
| 8 | * with it. | ||
| 9 | */ | ||
| 10 | #define SYS_IRQS 256 | ||
| 11 | #define NR_IRQS SYS_IRQS | ||
| 12 | |||
| 13 | #else | ||
| 14 | |||
| 15 | /* | ||
| 16 | * # of m68k interrupts | ||
| 17 | */ | ||
| 18 | #define SYS_IRQS 8 | ||
| 19 | #define NR_IRQS (24 + SYS_IRQS) | ||
| 20 | |||
| 21 | #endif /* CONFIG_COLDFIRE */ | ||
| 22 | |||
| 23 | |||
| 24 | #define irq_canonicalize(irq) (irq) | ||
| 25 | |||
| 26 | #endif /* _M68KNOMMU_IRQ_H_ */ | ||
diff --git a/arch/m68knommu/include/asm/irq_regs.h b/arch/m68knommu/include/asm/irq_regs.h deleted file mode 100644 index 3dd9c0b70270..000000000000 --- a/arch/m68knommu/include/asm/irq_regs.h +++ /dev/null | |||
| @@ -1 +0,0 @@ | |||
| 1 | #include <asm-generic/irq_regs.h> | ||
diff --git a/arch/m68knommu/include/asm/kdebug.h b/arch/m68knommu/include/asm/kdebug.h deleted file mode 100644 index 6ece1b037665..000000000000 --- a/arch/m68knommu/include/asm/kdebug.h +++ /dev/null | |||
| @@ -1 +0,0 @@ | |||
| 1 | #include <asm-generic/kdebug.h> | ||
diff --git a/arch/m68knommu/include/asm/kmap_types.h b/arch/m68knommu/include/asm/kmap_types.h deleted file mode 100644 index bfb6707575d1..000000000000 --- a/arch/m68knommu/include/asm/kmap_types.h +++ /dev/null | |||
| @@ -1,21 +0,0 @@ | |||
| 1 | #ifndef __ASM_M68K_KMAP_TYPES_H | ||
| 2 | #define __ASM_M68K_KMAP_TYPES_H | ||
| 3 | |||
| 4 | enum km_type { | ||
| 5 | KM_BOUNCE_READ, | ||
| 6 | KM_SKB_SUNRPC_DATA, | ||
| 7 | KM_SKB_DATA_SOFTIRQ, | ||
| 8 | KM_USER0, | ||
| 9 | KM_USER1, | ||
| 10 | KM_BIO_SRC_IRQ, | ||
| 11 | KM_BIO_DST_IRQ, | ||
| 12 | KM_PTE0, | ||
| 13 | KM_PTE1, | ||
| 14 | KM_IRQ0, | ||
| 15 | KM_IRQ1, | ||
| 16 | KM_SOFTIRQ0, | ||
| 17 | KM_SOFTIRQ1, | ||
| 18 | KM_TYPE_NR | ||
| 19 | }; | ||
| 20 | |||
| 21 | #endif | ||
diff --git a/arch/m68knommu/include/asm/linkage.h b/arch/m68knommu/include/asm/linkage.h deleted file mode 100644 index c288a19ff489..000000000000 --- a/arch/m68knommu/include/asm/linkage.h +++ /dev/null | |||
| @@ -1 +0,0 @@ | |||
| 1 | #include <asm-m68k/linkage.h> | ||
diff --git a/arch/m68knommu/include/asm/local.h b/arch/m68knommu/include/asm/local.h deleted file mode 100644 index 84a39c1b86f8..000000000000 --- a/arch/m68knommu/include/asm/local.h +++ /dev/null | |||
| @@ -1,6 +0,0 @@ | |||
| 1 | #ifndef __M68KNOMMU_LOCAL_H | ||
| 2 | #define __M68KNOMMU_LOCAL_H | ||
| 3 | |||
| 4 | #include <asm-generic/local.h> | ||
| 5 | |||
| 6 | #endif /* __M68KNOMMU_LOCAL_H */ | ||
diff --git a/arch/m68knommu/include/asm/m5206sim.h b/arch/m68knommu/include/asm/m5206sim.h deleted file mode 100644 index 7e3594dea88b..000000000000 --- a/arch/m68knommu/include/asm/m5206sim.h +++ /dev/null | |||
| @@ -1,131 +0,0 @@ | |||
| 1 | /****************************************************************************/ | ||
| 2 | |||
| 3 | /* | ||
| 4 | * m5206sim.h -- ColdFire 5206 System Integration Module support. | ||
| 5 | * | ||
| 6 | * (C) Copyright 1999, Greg Ungerer (gerg@snapgear.com) | ||
| 7 | * (C) Copyright 2000, Lineo Inc. (www.lineo.com) | ||
| 8 | */ | ||
| 9 | |||
| 10 | /****************************************************************************/ | ||
| 11 | #ifndef m5206sim_h | ||
| 12 | #define m5206sim_h | ||
| 13 | /****************************************************************************/ | ||
| 14 | |||
| 15 | |||
| 16 | /* | ||
| 17 | * Define the 5206 SIM register set addresses. | ||
| 18 | */ | ||
| 19 | #define MCFSIM_SIMR 0x03 /* SIM Config reg (r/w) */ | ||
| 20 | #define MCFSIM_ICR1 0x14 /* Intr Ctrl reg 1 (r/w) */ | ||
| 21 | #define MCFSIM_ICR2 0x15 /* Intr Ctrl reg 2 (r/w) */ | ||
| 22 | #define MCFSIM_ICR3 0x16 /* Intr Ctrl reg 3 (r/w) */ | ||
| 23 | #define MCFSIM_ICR4 0x17 /* Intr Ctrl reg 4 (r/w) */ | ||
| 24 | #define MCFSIM_ICR5 0x18 /* Intr Ctrl reg 5 (r/w) */ | ||
| 25 | #define MCFSIM_ICR6 0x19 /* Intr Ctrl reg 6 (r/w) */ | ||
| 26 | #define MCFSIM_ICR7 0x1a /* Intr Ctrl reg 7 (r/w) */ | ||
| 27 | #define MCFSIM_ICR8 0x1b /* Intr Ctrl reg 8 (r/w) */ | ||
| 28 | #define MCFSIM_ICR9 0x1c /* Intr Ctrl reg 9 (r/w) */ | ||
| 29 | #define MCFSIM_ICR10 0x1d /* Intr Ctrl reg 10 (r/w) */ | ||
| 30 | #define MCFSIM_ICR11 0x1e /* Intr Ctrl reg 11 (r/w) */ | ||
| 31 | #define MCFSIM_ICR12 0x1f /* Intr Ctrl reg 12 (r/w) */ | ||
| 32 | #define MCFSIM_ICR13 0x20 /* Intr Ctrl reg 13 (r/w) */ | ||
| 33 | #ifdef CONFIG_M5206e | ||
| 34 | #define MCFSIM_ICR14 0x21 /* Intr Ctrl reg 14 (r/w) */ | ||
| 35 | #define MCFSIM_ICR15 0x22 /* Intr Ctrl reg 15 (r/w) */ | ||
| 36 | #endif | ||
| 37 | |||
| 38 | #define MCFSIM_IMR 0x36 /* Interrupt Mask reg (r/w) */ | ||
| 39 | #define MCFSIM_IPR 0x3a /* Interrupt Pend reg (r/w) */ | ||
| 40 | |||
| 41 | #define MCFSIM_RSR 0x40 /* Reset Status reg (r/w) */ | ||
| 42 | #define MCFSIM_SYPCR 0x41 /* System Protection reg (r/w)*/ | ||
| 43 | |||
| 44 | #define MCFSIM_SWIVR 0x42 /* SW Watchdog intr reg (r/w) */ | ||
| 45 | #define MCFSIM_SWSR 0x43 /* SW Watchdog service (r/w) */ | ||
| 46 | |||
| 47 | #define MCFSIM_DCRR 0x46 /* DRAM Refresh reg (r/w) */ | ||
| 48 | #define MCFSIM_DCTR 0x4a /* DRAM Timing reg (r/w) */ | ||
| 49 | #define MCFSIM_DAR0 0x4c /* DRAM 0 Address reg(r/w) */ | ||
| 50 | #define MCFSIM_DMR0 0x50 /* DRAM 0 Mask reg (r/w) */ | ||
| 51 | #define MCFSIM_DCR0 0x57 /* DRAM 0 Control reg (r/w) */ | ||
| 52 | #define MCFSIM_DAR1 0x58 /* DRAM 1 Address reg (r/w) */ | ||
| 53 | #define MCFSIM_DMR1 0x5c /* DRAM 1 Mask reg (r/w) */ | ||
| 54 | #define MCFSIM_DCR1 0x63 /* DRAM 1 Control reg (r/w) */ | ||
| 55 | |||
| 56 | #define MCFSIM_CSAR0 0x64 /* CS 0 Address 0 reg (r/w) */ | ||
| 57 | #define MCFSIM_CSMR0 0x68 /* CS 0 Mask 0 reg (r/w) */ | ||
| 58 | #define MCFSIM_CSCR0 0x6e /* CS 0 Control reg (r/w) */ | ||
| 59 | #define MCFSIM_CSAR1 0x70 /* CS 1 Address reg (r/w) */ | ||
| 60 | #define MCFSIM_CSMR1 0x74 /* CS 1 Mask reg (r/w) */ | ||
| 61 | #define MCFSIM_CSCR1 0x7a /* CS 1 Control reg (r/w) */ | ||
| 62 | #define MCFSIM_CSAR2 0x7c /* CS 2 Address reg (r/w) */ | ||
| 63 | #define MCFSIM_CSMR2 0x80 /* CS 2 Mask reg (r/w) */ | ||
| 64 | #define MCFSIM_CSCR2 0x86 /* CS 2 Control reg (r/w) */ | ||
| 65 | #define MCFSIM_CSAR3 0x88 /* CS 3 Address reg (r/w) */ | ||
| 66 | #define MCFSIM_CSMR3 0x8c /* CS 3 Mask reg (r/w) */ | ||
| 67 | #define MCFSIM_CSCR3 0x92 /* CS 3 Control reg (r/w) */ | ||
| 68 | #define MCFSIM_CSAR4 0x94 /* CS 4 Address reg (r/w) */ | ||
| 69 | #define MCFSIM_CSMR4 0x98 /* CS 4 Mask reg (r/w) */ | ||
| 70 | #define MCFSIM_CSCR4 0x9e /* CS 4 Control reg (r/w) */ | ||
| 71 | #define MCFSIM_CSAR5 0xa0 /* CS 5 Address reg (r/w) */ | ||
| 72 | #define MCFSIM_CSMR5 0xa4 /* CS 5 Mask reg (r/w) */ | ||
| 73 | #define MCFSIM_CSCR5 0xaa /* CS 5 Control reg (r/w) */ | ||
| 74 | #define MCFSIM_CSAR6 0xac /* CS 6 Address reg (r/w) */ | ||
| 75 | #define MCFSIM_CSMR6 0xb0 /* CS 6 Mask reg (r/w) */ | ||
| 76 | #define MCFSIM_CSCR6 0xb6 /* CS 6 Control reg (r/w) */ | ||
| 77 | #define MCFSIM_CSAR7 0xb8 /* CS 7 Address reg (r/w) */ | ||
| 78 | #define MCFSIM_CSMR7 0xbc /* CS 7 Mask reg (r/w) */ | ||
| 79 | #define MCFSIM_CSCR7 0xc2 /* CS 7 Control reg (r/w) */ | ||
| 80 | #define MCFSIM_DMCR 0xc6 /* Default control */ | ||
| 81 | |||
| 82 | #ifdef CONFIG_M5206e | ||
| 83 | #define MCFSIM_PAR 0xca /* Pin Assignment reg (r/w) */ | ||
| 84 | #else | ||
| 85 | #define MCFSIM_PAR 0xcb /* Pin Assignment reg (r/w) */ | ||
| 86 | #endif | ||
| 87 | |||
| 88 | #define MCFSIM_PADDR 0x1c5 /* Parallel Direction (r/w) */ | ||
| 89 | #define MCFSIM_PADAT 0x1c9 /* Parallel Port Value (r/w) */ | ||
| 90 | |||
| 91 | /* | ||
| 92 | * Some symbol defines for the Parallel Port Pin Assignment Register | ||
| 93 | */ | ||
| 94 | #ifdef CONFIG_M5206e | ||
| 95 | #define MCFSIM_PAR_DREQ0 0x100 /* Set to select DREQ0 input */ | ||
| 96 | /* Clear to select T0 input */ | ||
| 97 | #define MCFSIM_PAR_DREQ1 0x200 /* Select DREQ1 input */ | ||
| 98 | /* Clear to select T0 output */ | ||
| 99 | #endif | ||
| 100 | |||
| 101 | /* | ||
| 102 | * Some symbol defines for the Interrupt Control Register | ||
| 103 | */ | ||
| 104 | #define MCFSIM_SWDICR MCFSIM_ICR8 /* Watchdog timer ICR */ | ||
| 105 | #define MCFSIM_TIMER1ICR MCFSIM_ICR9 /* Timer 1 ICR */ | ||
| 106 | #define MCFSIM_TIMER2ICR MCFSIM_ICR10 /* Timer 2 ICR */ | ||
| 107 | #define MCFSIM_UART1ICR MCFSIM_ICR12 /* UART 1 ICR */ | ||
| 108 | #define MCFSIM_UART2ICR MCFSIM_ICR13 /* UART 2 ICR */ | ||
| 109 | #ifdef CONFIG_M5206e | ||
| 110 | #define MCFSIM_DMA1ICR MCFSIM_ICR14 /* DMA 1 ICR */ | ||
| 111 | #define MCFSIM_DMA2ICR MCFSIM_ICR15 /* DMA 2 ICR */ | ||
| 112 | #endif | ||
| 113 | |||
| 114 | #if defined(CONFIG_M5206e) | ||
| 115 | #define MCFSIM_IMR_MASKALL 0xfffe /* All SIM intr sources */ | ||
| 116 | #endif | ||
| 117 | |||
| 118 | /* | ||
| 119 | * Macro to get and set IMR register. It is 16 bits on the 5206. | ||
| 120 | */ | ||
| 121 | #define mcf_getimr() \ | ||
| 122 | *((volatile unsigned short *) (MCF_MBAR + MCFSIM_IMR)) | ||
| 123 | |||
| 124 | #define mcf_setimr(imr) \ | ||
| 125 | *((volatile unsigned short *) (MCF_MBAR + MCFSIM_IMR)) = (imr) | ||
| 126 | |||
| 127 | #define mcf_getipr() \ | ||
| 128 | *((volatile unsigned short *) (MCF_MBAR + MCFSIM_IPR)) | ||
| 129 | |||
| 130 | /****************************************************************************/ | ||
| 131 | #endif /* m5206sim_h */ | ||
diff --git a/arch/m68knommu/include/asm/m520xsim.h b/arch/m68knommu/include/asm/m520xsim.h deleted file mode 100644 index 49d016e6391a..000000000000 --- a/arch/m68knommu/include/asm/m520xsim.h +++ /dev/null | |||
| @@ -1,63 +0,0 @@ | |||
| 1 | /****************************************************************************/ | ||
| 2 | |||
| 3 | /* | ||
| 4 | * m520xsim.h -- ColdFire 5207/5208 System Integration Module support. | ||
| 5 | * | ||
| 6 | * (C) Copyright 2005, Intec Automation (mike@steroidmicros.com) | ||
| 7 | */ | ||
| 8 | |||
| 9 | /****************************************************************************/ | ||
| 10 | #ifndef m520xsim_h | ||
| 11 | #define m520xsim_h | ||
| 12 | /****************************************************************************/ | ||
| 13 | |||
| 14 | |||
| 15 | /* | ||
| 16 | * Define the 5282 SIM register set addresses. | ||
| 17 | */ | ||
| 18 | #define MCFICM_INTC0 0x48000 /* Base for Interrupt Ctrl 0 */ | ||
| 19 | #define MCFINTC_IPRH 0x00 /* Interrupt pending 32-63 */ | ||
| 20 | #define MCFINTC_IPRL 0x04 /* Interrupt pending 1-31 */ | ||
| 21 | #define MCFINTC_IMRH 0x08 /* Interrupt mask 32-63 */ | ||
| 22 | #define MCFINTC_IMRL 0x0c /* Interrupt mask 1-31 */ | ||
| 23 | #define MCFINTC_INTFRCH 0x10 /* Interrupt force 32-63 */ | ||
| 24 | #define MCFINTC_INTFRCL 0x14 /* Interrupt force 1-31 */ | ||
| 25 | #define MCFINTC_ICR0 0x40 /* Base ICR register */ | ||
| 26 | |||
| 27 | #define MCFINT_VECBASE 64 | ||
| 28 | #define MCFINT_UART0 26 /* Interrupt number for UART0 */ | ||
| 29 | #define MCFINT_UART1 27 /* Interrupt number for UART1 */ | ||
| 30 | #define MCFINT_UART2 28 /* Interrupt number for UART2 */ | ||
| 31 | #define MCFINT_QSPI 31 /* Interrupt number for QSPI */ | ||
| 32 | #define MCFINT_PIT1 4 /* Interrupt number for PIT1 (PIT0 in processor) */ | ||
| 33 | |||
| 34 | /* | ||
| 35 | * SDRAM configuration registers. | ||
| 36 | */ | ||
| 37 | #define MCFSIM_SDMR 0x000a8000 /* SDRAM Mode/Extended Mode Register */ | ||
| 38 | #define MCFSIM_SDCR 0x000a8004 /* SDRAM Control Register */ | ||
| 39 | #define MCFSIM_SDCFG1 0x000a8008 /* SDRAM Configuration Register 1 */ | ||
| 40 | #define MCFSIM_SDCFG2 0x000a800c /* SDRAM Configuration Register 2 */ | ||
| 41 | #define MCFSIM_SDCS0 0x000a8110 /* SDRAM Chip Select 0 Configuration */ | ||
| 42 | #define MCFSIM_SDCS1 0x000a8114 /* SDRAM Chip Select 1 Configuration */ | ||
| 43 | |||
| 44 | |||
| 45 | #define MCF_GPIO_PAR_UART (0xA4036) | ||
| 46 | #define MCF_GPIO_PAR_FECI2C (0xA4033) | ||
| 47 | #define MCF_GPIO_PAR_FEC (0xA4038) | ||
| 48 | |||
| 49 | #define MCF_GPIO_PAR_UART_PAR_URXD0 (0x0001) | ||
| 50 | #define MCF_GPIO_PAR_UART_PAR_UTXD0 (0x0002) | ||
| 51 | |||
| 52 | #define MCF_GPIO_PAR_UART_PAR_URXD1 (0x0040) | ||
| 53 | #define MCF_GPIO_PAR_UART_PAR_UTXD1 (0x0080) | ||
| 54 | |||
| 55 | #define MCF_GPIO_PAR_FECI2C_PAR_SDA_URXD2 (0x02) | ||
| 56 | #define MCF_GPIO_PAR_FECI2C_PAR_SCL_UTXD2 (0x04) | ||
| 57 | |||
| 58 | #define ICR_INTRCONF 0x05 | ||
| 59 | #define MCFPIT_IMR MCFINTC_IMRL | ||
| 60 | #define MCFPIT_IMR_IBIT (1 << MCFINT_PIT1) | ||
| 61 | |||
| 62 | /****************************************************************************/ | ||
| 63 | #endif /* m520xsim_h */ | ||
diff --git a/arch/m68knommu/include/asm/m523xsim.h b/arch/m68knommu/include/asm/m523xsim.h deleted file mode 100644 index bf397313e93f..000000000000 --- a/arch/m68knommu/include/asm/m523xsim.h +++ /dev/null | |||
| @@ -1,45 +0,0 @@ | |||
| 1 | /****************************************************************************/ | ||
| 2 | |||
| 3 | /* | ||
| 4 | * m523xsim.h -- ColdFire 523x System Integration Module support. | ||
| 5 | * | ||
| 6 | * (C) Copyright 2003-2005, Greg Ungerer <gerg@snapgear.com> | ||
| 7 | */ | ||
| 8 | |||
| 9 | /****************************************************************************/ | ||
| 10 | #ifndef m523xsim_h | ||
| 11 | #define m523xsim_h | ||
| 12 | /****************************************************************************/ | ||
| 13 | |||
| 14 | |||
| 15 | /* | ||
| 16 | * Define the 523x SIM register set addresses. | ||
| 17 | */ | ||
| 18 | #define MCFICM_INTC0 0x0c00 /* Base for Interrupt Ctrl 0 */ | ||
| 19 | #define MCFICM_INTC1 0x0d00 /* Base for Interrupt Ctrl 0 */ | ||
| 20 | #define MCFINTC_IPRH 0x00 /* Interrupt pending 32-63 */ | ||
| 21 | #define MCFINTC_IPRL 0x04 /* Interrupt pending 1-31 */ | ||
| 22 | #define MCFINTC_IMRH 0x08 /* Interrupt mask 32-63 */ | ||
| 23 | #define MCFINTC_IMRL 0x0c /* Interrupt mask 1-31 */ | ||
| 24 | #define MCFINTC_INTFRCH 0x10 /* Interrupt force 32-63 */ | ||
| 25 | #define MCFINTC_INTFRCL 0x14 /* Interrupt force 1-31 */ | ||
| 26 | #define MCFINTC_IRLR 0x18 /* */ | ||
| 27 | #define MCFINTC_IACKL 0x19 /* */ | ||
| 28 | #define MCFINTC_ICR0 0x40 /* Base ICR register */ | ||
| 29 | |||
| 30 | #define MCFINT_VECBASE 64 /* Vector base number */ | ||
| 31 | #define MCFINT_UART0 13 /* Interrupt number for UART0 */ | ||
| 32 | #define MCFINT_PIT1 36 /* Interrupt number for PIT1 */ | ||
| 33 | #define MCFINT_QSPI 18 /* Interrupt number for QSPI */ | ||
| 34 | |||
| 35 | /* | ||
| 36 | * SDRAM configuration registers. | ||
| 37 | */ | ||
| 38 | #define MCFSIM_DCR 0x44 /* SDRAM control */ | ||
| 39 | #define MCFSIM_DACR0 0x48 /* SDRAM base address 0 */ | ||
| 40 | #define MCFSIM_DMR0 0x4c /* SDRAM address mask 0 */ | ||
| 41 | #define MCFSIM_DACR1 0x50 /* SDRAM base address 1 */ | ||
| 42 | #define MCFSIM_DMR1 0x54 /* SDRAM address mask 1 */ | ||
| 43 | |||
| 44 | /****************************************************************************/ | ||
| 45 | #endif /* m523xsim_h */ | ||
diff --git a/arch/m68knommu/include/asm/m5249sim.h b/arch/m68knommu/include/asm/m5249sim.h deleted file mode 100644 index 366eb8602d2f..000000000000 --- a/arch/m68knommu/include/asm/m5249sim.h +++ /dev/null | |||
| @@ -1,209 +0,0 @@ | |||
| 1 | /****************************************************************************/ | ||
| 2 | |||
| 3 | /* | ||
| 4 | * m5249sim.h -- ColdFire 5249 System Integration Module support. | ||
| 5 | * | ||
| 6 | * (C) Copyright 2002, Greg Ungerer (gerg@snapgear.com) | ||
| 7 | */ | ||
| 8 | |||
| 9 | /****************************************************************************/ | ||
| 10 | #ifndef m5249sim_h | ||
| 11 | #define m5249sim_h | ||
| 12 | /****************************************************************************/ | ||
| 13 | |||
| 14 | /* | ||
| 15 | * Define the 5249 SIM register set addresses. | ||
| 16 | */ | ||
| 17 | #define MCFSIM_RSR 0x00 /* Reset Status reg (r/w) */ | ||
| 18 | #define MCFSIM_SYPCR 0x01 /* System Protection reg (r/w)*/ | ||
| 19 | #define MCFSIM_SWIVR 0x02 /* SW Watchdog intr reg (r/w) */ | ||
| 20 | #define MCFSIM_SWSR 0x03 /* SW Watchdog service (r/w) */ | ||
| 21 | #define MCFSIM_PAR 0x04 /* Pin Assignment reg (r/w) */ | ||
| 22 | #define MCFSIM_IRQPAR 0x06 /* Interrupt Assignment reg (r/w) */ | ||
| 23 | #define MCFSIM_MPARK 0x0C /* BUS Master Control Reg*/ | ||
| 24 | #define MCFSIM_IPR 0x40 /* Interrupt Pend reg (r/w) */ | ||
| 25 | #define MCFSIM_IMR 0x44 /* Interrupt Mask reg (r/w) */ | ||
| 26 | #define MCFSIM_AVR 0x4b /* Autovector Ctrl reg (r/w) */ | ||
| 27 | #define MCFSIM_ICR0 0x4c /* Intr Ctrl reg 0 (r/w) */ | ||
| 28 | #define MCFSIM_ICR1 0x4d /* Intr Ctrl reg 1 (r/w) */ | ||
| 29 | #define MCFSIM_ICR2 0x4e /* Intr Ctrl reg 2 (r/w) */ | ||
| 30 | #define MCFSIM_ICR3 0x4f /* Intr Ctrl reg 3 (r/w) */ | ||
| 31 | #define MCFSIM_ICR4 0x50 /* Intr Ctrl reg 4 (r/w) */ | ||
| 32 | #define MCFSIM_ICR5 0x51 /* Intr Ctrl reg 5 (r/w) */ | ||
| 33 | #define MCFSIM_ICR6 0x52 /* Intr Ctrl reg 6 (r/w) */ | ||
| 34 | #define MCFSIM_ICR7 0x53 /* Intr Ctrl reg 7 (r/w) */ | ||
| 35 | #define MCFSIM_ICR8 0x54 /* Intr Ctrl reg 8 (r/w) */ | ||
| 36 | #define MCFSIM_ICR9 0x55 /* Intr Ctrl reg 9 (r/w) */ | ||
| 37 | #define MCFSIM_ICR10 0x56 /* Intr Ctrl reg 10 (r/w) */ | ||
| 38 | #define MCFSIM_ICR11 0x57 /* Intr Ctrl reg 11 (r/w) */ | ||
| 39 | |||
| 40 | #define MCFSIM_CSAR0 0x80 /* CS 0 Address 0 reg (r/w) */ | ||
| 41 | #define MCFSIM_CSMR0 0x84 /* CS 0 Mask 0 reg (r/w) */ | ||
| 42 | #define MCFSIM_CSCR0 0x8a /* CS 0 Control reg (r/w) */ | ||
| 43 | #define MCFSIM_CSAR1 0x8c /* CS 1 Address reg (r/w) */ | ||
| 44 | #define MCFSIM_CSMR1 0x90 /* CS 1 Mask reg (r/w) */ | ||
| 45 | #define MCFSIM_CSCR1 0x96 /* CS 1 Control reg (r/w) */ | ||
| 46 | #define MCFSIM_CSAR2 0x98 /* CS 2 Address reg (r/w) */ | ||
| 47 | #define MCFSIM_CSMR2 0x9c /* CS 2 Mask reg (r/w) */ | ||
| 48 | #define MCFSIM_CSCR2 0xa2 /* CS 2 Control reg (r/w) */ | ||
| 49 | #define MCFSIM_CSAR3 0xa4 /* CS 3 Address reg (r/w) */ | ||
| 50 | #define MCFSIM_CSMR3 0xa8 /* CS 3 Mask reg (r/w) */ | ||
| 51 | #define MCFSIM_CSCR3 0xae /* CS 3 Control reg (r/w) */ | ||
| 52 | |||
| 53 | #define MCFSIM_DCR 0x100 /* DRAM Control reg (r/w) */ | ||
| 54 | #define MCFSIM_DACR0 0x108 /* DRAM 0 Addr and Ctrl (r/w) */ | ||
| 55 | #define MCFSIM_DMR0 0x10c /* DRAM 0 Mask reg (r/w) */ | ||
| 56 | #define MCFSIM_DACR1 0x110 /* DRAM 1 Addr and Ctrl (r/w) */ | ||
| 57 | #define MCFSIM_DMR1 0x114 /* DRAM 1 Mask reg (r/w) */ | ||
| 58 | |||
| 59 | |||
| 60 | /* | ||
| 61 | * Some symbol defines for the above... | ||
| 62 | */ | ||
| 63 | #define MCFSIM_SWDICR MCFSIM_ICR0 /* Watchdog timer ICR */ | ||
| 64 | #define MCFSIM_TIMER1ICR MCFSIM_ICR1 /* Timer 1 ICR */ | ||
| 65 | #define MCFSIM_TIMER2ICR MCFSIM_ICR2 /* Timer 2 ICR */ | ||
| 66 | #define MCFSIM_UART1ICR MCFSIM_ICR4 /* UART 1 ICR */ | ||
| 67 | #define MCFSIM_UART2ICR MCFSIM_ICR5 /* UART 2 ICR */ | ||
| 68 | #define MCFSIM_DMA0ICR MCFSIM_ICR6 /* DMA 0 ICR */ | ||
| 69 | #define MCFSIM_DMA1ICR MCFSIM_ICR7 /* DMA 1 ICR */ | ||
| 70 | #define MCFSIM_DMA2ICR MCFSIM_ICR8 /* DMA 2 ICR */ | ||
| 71 | #define MCFSIM_DMA3ICR MCFSIM_ICR9 /* DMA 3 ICR */ | ||
| 72 | |||
| 73 | /* | ||
| 74 | * General purpose IO registers (in MBAR2). | ||
| 75 | */ | ||
| 76 | #define MCFSIM2_GPIOREAD 0x0 /* GPIO read values */ | ||
| 77 | #define MCFSIM2_GPIOWRITE 0x4 /* GPIO write values */ | ||
| 78 | #define MCFSIM2_GPIOENABLE 0x8 /* GPIO enabled */ | ||
| 79 | #define MCFSIM2_GPIOFUNC 0xc /* GPIO function */ | ||
| 80 | #define MCFSIM2_GPIO1READ 0xb0 /* GPIO1 read values */ | ||
| 81 | #define MCFSIM2_GPIO1WRITE 0xb4 /* GPIO1 write values */ | ||
| 82 | #define MCFSIM2_GPIO1ENABLE 0xb8 /* GPIO1 enabled */ | ||
| 83 | #define MCFSIM2_GPIO1FUNC 0xbc /* GPIO1 function */ | ||
| 84 | |||
| 85 | #define MCFSIM2_GPIOINTSTAT 0xc0 /* GPIO interrupt status */ | ||
| 86 | #define MCFSIM2_GPIOINTCLEAR 0xc0 /* GPIO interrupt clear */ | ||
| 87 | #define MCFSIM2_GPIOINTENABLE 0xc4 /* GPIO interrupt enable */ | ||
| 88 | |||
| 89 | #define MCFSIM2_INTLEVEL1 0x140 /* Interrupt level reg 1 */ | ||
| 90 | #define MCFSIM2_INTLEVEL2 0x144 /* Interrupt level reg 2 */ | ||
| 91 | #define MCFSIM2_INTLEVEL3 0x148 /* Interrupt level reg 3 */ | ||
| 92 | #define MCFSIM2_INTLEVEL4 0x14c /* Interrupt level reg 4 */ | ||
| 93 | #define MCFSIM2_INTLEVEL5 0x150 /* Interrupt level reg 5 */ | ||
| 94 | #define MCFSIM2_INTLEVEL6 0x154 /* Interrupt level reg 6 */ | ||
| 95 | #define MCFSIM2_INTLEVEL7 0x158 /* Interrupt level reg 7 */ | ||
| 96 | #define MCFSIM2_INTLEVEL8 0x15c /* Interrupt level reg 8 */ | ||
| 97 | |||
| 98 | #define MCFSIM2_DMAROUTE 0x188 /* DMA routing */ | ||
| 99 | |||
| 100 | #define MCFSIM2_IDECONFIG1 0x18c /* IDEconfig1 */ | ||
| 101 | #define MCFSIM2_IDECONFIG2 0x190 /* IDEconfig2 */ | ||
| 102 | |||
| 103 | |||
| 104 | /* | ||
| 105 | * Macro to set IMR register. It is 32 bits on the 5249. | ||
| 106 | */ | ||
| 107 | #define MCFSIM_IMR_MASKALL 0x7fffe /* All SIM intr sources */ | ||
| 108 | |||
| 109 | #define mcf_getimr() \ | ||
| 110 | *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR)) | ||
| 111 | |||
| 112 | #define mcf_setimr(imr) \ | ||
| 113 | *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR)) = (imr); | ||
| 114 | |||
| 115 | #define mcf_getipr() \ | ||
| 116 | *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IPR)) | ||
| 117 | |||
| 118 | /****************************************************************************/ | ||
| 119 | |||
| 120 | #ifdef __ASSEMBLER__ | ||
| 121 | |||
| 122 | /* | ||
| 123 | * The M5249C3 board needs a little help getting all its SIM devices | ||
| 124 | * initialized at kernel start time. dBUG doesn't set much up, so | ||
| 125 | * we need to do it manually. | ||
| 126 | */ | ||
| 127 | .macro m5249c3_setup | ||
| 128 | /* | ||
| 129 | * Set MBAR1 and MBAR2, just incase they are not set. | ||
| 130 | */ | ||
| 131 | movel #0x10000001,%a0 | ||
| 132 | movec %a0,%MBAR /* map MBAR region */ | ||
| 133 | subql #1,%a0 /* get MBAR address in a0 */ | ||
| 134 | |||
| 135 | movel #0x80000001,%a1 | ||
| 136 | movec %a1,#3086 /* map MBAR2 region */ | ||
| 137 | subql #1,%a1 /* get MBAR2 address in a1 */ | ||
| 138 | |||
| 139 | /* | ||
| 140 | * Move secondary interrupts to base at 128. | ||
| 141 | */ | ||
| 142 | moveb #0x80,%d0 | ||
| 143 | moveb %d0,0x16b(%a1) /* interrupt base register */ | ||
| 144 | |||
| 145 | /* | ||
| 146 | * Work around broken CSMR0/DRAM vector problem. | ||
| 147 | */ | ||
| 148 | movel #0x001F0021,%d0 /* disable C/I bit */ | ||
| 149 | movel %d0,0x84(%a0) /* set CSMR0 */ | ||
| 150 | |||
| 151 | /* | ||
| 152 | * Disable the PLL firstly. (Who knows what state it is | ||
| 153 | * in here!). | ||
| 154 | */ | ||
| 155 | movel 0x180(%a1),%d0 /* get current PLL value */ | ||
| 156 | andl #0xfffffffe,%d0 /* PLL bypass first */ | ||
| 157 | movel %d0,0x180(%a1) /* set PLL register */ | ||
| 158 | nop | ||
| 159 | |||
| 160 | #if CONFIG_CLOCK_FREQ == 140000000 | ||
| 161 | /* | ||
| 162 | * Set initial clock frequency. This assumes M5249C3 board | ||
| 163 | * is fitted with 11.2896MHz crystal. It will program the | ||
| 164 | * PLL for 140MHz. Lets go fast :-) | ||
| 165 | */ | ||
| 166 | movel #0x125a40f0,%d0 /* set for 140MHz */ | ||
| 167 | movel %d0,0x180(%a1) /* set PLL register */ | ||
| 168 | orl #0x1,%d0 | ||
| 169 | movel %d0,0x180(%a1) /* set PLL register */ | ||
| 170 | #endif | ||
| 171 | |||
| 172 | /* | ||
| 173 | * Setup CS1 for ethernet controller. | ||
| 174 | * (Setup as per M5249C3 doco). | ||
| 175 | */ | ||
| 176 | movel #0xe0000000,%d0 /* CS1 mapped at 0xe0000000 */ | ||
| 177 | movel %d0,0x8c(%a0) | ||
| 178 | movel #0x001f0021,%d0 /* CS1 size of 1Mb */ | ||
| 179 | movel %d0,0x90(%a0) | ||
| 180 | movew #0x0080,%d0 /* CS1 = 16bit port, AA */ | ||
| 181 | movew %d0,0x96(%a0) | ||
| 182 | |||
| 183 | /* | ||
| 184 | * Setup CS2 for IDE interface. | ||
| 185 | */ | ||
| 186 | movel #0x50000000,%d0 /* CS2 mapped at 0x50000000 */ | ||
| 187 | movel %d0,0x98(%a0) | ||
| 188 | movel #0x001f0001,%d0 /* CS2 size of 1MB */ | ||
| 189 | movel %d0,0x9c(%a0) | ||
| 190 | movew #0x0080,%d0 /* CS2 = 16bit, TA */ | ||
| 191 | movew %d0,0xa2(%a0) | ||
| 192 | |||
| 193 | movel #0x00107000,%d0 /* IDEconfig1 */ | ||
| 194 | movel %d0,0x18c(%a1) | ||
| 195 | movel #0x000c0400,%d0 /* IDEconfig2 */ | ||
| 196 | movel %d0,0x190(%a1) | ||
| 197 | |||
| 198 | movel #0x00080000,%d0 /* GPIO19, IDE reset bit */ | ||
| 199 | orl %d0,0xc(%a1) /* function GPIO19 */ | ||
| 200 | orl %d0,0x8(%a1) /* enable GPIO19 as output */ | ||
| 201 | orl %d0,0x4(%a1) /* de-assert IDE reset */ | ||
| 202 | .endm | ||
| 203 | |||
| 204 | #define PLATFORM_SETUP m5249c3_setup | ||
| 205 | |||
| 206 | #endif /* __ASSEMBLER__ */ | ||
| 207 | |||
| 208 | /****************************************************************************/ | ||
| 209 | #endif /* m5249sim_h */ | ||
diff --git a/arch/m68knommu/include/asm/m5272sim.h b/arch/m68knommu/include/asm/m5272sim.h deleted file mode 100644 index 6217edc21139..000000000000 --- a/arch/m68knommu/include/asm/m5272sim.h +++ /dev/null | |||
| @@ -1,78 +0,0 @@ | |||
| 1 | /****************************************************************************/ | ||
| 2 | |||
| 3 | /* | ||
| 4 | * m5272sim.h -- ColdFire 5272 System Integration Module support. | ||
| 5 | * | ||
| 6 | * (C) Copyright 1999, Greg Ungerer (gerg@snapgear.com) | ||
| 7 | * (C) Copyright 2000, Lineo Inc. (www.lineo.com) | ||
| 8 | */ | ||
| 9 | |||
| 10 | /****************************************************************************/ | ||
| 11 | #ifndef m5272sim_h | ||
| 12 | #define m5272sim_h | ||
| 13 | /****************************************************************************/ | ||
| 14 | |||
| 15 | |||
| 16 | /* | ||
| 17 | * Define the 5272 SIM register set addresses. | ||
| 18 | */ | ||
| 19 | #define MCFSIM_SCR 0x04 /* SIM Config reg (r/w) */ | ||
| 20 | #define MCFSIM_SPR 0x06 /* System Protection reg (r/w)*/ | ||
| 21 | #define MCFSIM_PMR 0x08 /* Power Management reg (r/w) */ | ||
| 22 | #define MCFSIM_APMR 0x0e /* Active Low Power reg (r/w) */ | ||
| 23 | #define MCFSIM_DIR 0x10 /* Device Identity reg (r/w) */ | ||
| 24 | |||
| 25 | #define MCFSIM_ICR1 0x20 /* Intr Ctrl reg 1 (r/w) */ | ||
| 26 | #define MCFSIM_ICR2 0x24 /* Intr Ctrl reg 2 (r/w) */ | ||
| 27 | #define MCFSIM_ICR3 0x28 /* Intr Ctrl reg 3 (r/w) */ | ||
| 28 | #define MCFSIM_ICR4 0x2c /* Intr Ctrl reg 4 (r/w) */ | ||
| 29 | |||
| 30 | #define MCFSIM_ISR 0x30 /* Interrupt Source reg (r/w) */ | ||
| 31 | #define MCFSIM_PITR 0x34 /* Interrupt Transition (r/w) */ | ||
| 32 | #define MCFSIM_PIWR 0x38 /* Interrupt Wakeup reg (r/w) */ | ||
| 33 | #define MCFSIM_PIVR 0x3f /* Interrupt Vector reg (r/w( */ | ||
| 34 | |||
| 35 | #define MCFSIM_WRRR 0x280 /* Watchdog reference (r/w) */ | ||
| 36 | #define MCFSIM_WIRR 0x284 /* Watchdog interrupt (r/w) */ | ||
| 37 | #define MCFSIM_WCR 0x288 /* Watchdog counter (r/w) */ | ||
| 38 | #define MCFSIM_WER 0x28c /* Watchdog event (r/w) */ | ||
| 39 | |||
| 40 | #define MCFSIM_CSBR0 0x40 /* CS0 Base Address (r/w) */ | ||
| 41 | #define MCFSIM_CSOR0 0x44 /* CS0 Option (r/w) */ | ||
| 42 | #define MCFSIM_CSBR1 0x48 /* CS1 Base Address (r/w) */ | ||
| 43 | #define MCFSIM_CSOR1 0x4c /* CS1 Option (r/w) */ | ||
| 44 | #define MCFSIM_CSBR2 0x50 /* CS2 Base Address (r/w) */ | ||
| 45 | #define MCFSIM_CSOR2 0x54 /* CS2 Option (r/w) */ | ||
| 46 | #define MCFSIM_CSBR3 0x58 /* CS3 Base Address (r/w) */ | ||
| 47 | #define MCFSIM_CSOR3 0x5c /* CS3 Option (r/w) */ | ||
| 48 | #define MCFSIM_CSBR4 0x60 /* CS4 Base Address (r/w) */ | ||
| 49 | #define MCFSIM_CSOR4 0x64 /* CS4 Option (r/w) */ | ||
| 50 | #define MCFSIM_CSBR5 0x68 /* CS5 Base Address (r/w) */ | ||
| 51 | #define MCFSIM_CSOR5 0x6c /* CS5 Option (r/w) */ | ||
| 52 | #define MCFSIM_CSBR6 0x70 /* CS6 Base Address (r/w) */ | ||
| 53 | #define MCFSIM_CSOR6 0x74 /* CS6 Option (r/w) */ | ||
| 54 | #define MCFSIM_CSBR7 0x78 /* CS7 Base Address (r/w) */ | ||
| 55 | #define MCFSIM_CSOR7 0x7c /* CS7 Option (r/w) */ | ||
| 56 | |||
| 57 | #define MCFSIM_SDCR 0x180 /* SDRAM Configuration (r/w) */ | ||
| 58 | #define MCFSIM_SDTR 0x184 /* SDRAM Timing (r/w) */ | ||
| 59 | #define MCFSIM_DCAR0 0x4c /* DRAM 0 Address reg(r/w) */ | ||
| 60 | #define MCFSIM_DCMR0 0x50 /* DRAM 0 Mask reg (r/w) */ | ||
| 61 | #define MCFSIM_DCCR0 0x57 /* DRAM 0 Control reg (r/w) */ | ||
| 62 | #define MCFSIM_DCAR1 0x58 /* DRAM 1 Address reg (r/w) */ | ||
| 63 | #define MCFSIM_DCMR1 0x5c /* DRAM 1 Mask reg (r/w) */ | ||
| 64 | #define MCFSIM_DCCR1 0x63 /* DRAM 1 Control reg (r/w) */ | ||
| 65 | |||
| 66 | #define MCFSIM_PACNT 0x80 /* Port A Control (r/w) */ | ||
| 67 | #define MCFSIM_PADDR 0x84 /* Port A Direction (r/w) */ | ||
| 68 | #define MCFSIM_PADAT 0x86 /* Port A Data (r/w) */ | ||
| 69 | #define MCFSIM_PBCNT 0x88 /* Port B Control (r/w) */ | ||
| 70 | #define MCFSIM_PBDDR 0x8c /* Port B Direction (r/w) */ | ||
| 71 | #define MCFSIM_PBDAT 0x8e /* Port B Data (r/w) */ | ||
| 72 | #define MCFSIM_PCDDR 0x94 /* Port C Direction (r/w) */ | ||
| 73 | #define MCFSIM_PCDAT 0x96 /* Port C Data (r/w) */ | ||
| 74 | #define MCFSIM_PDCNT 0x98 /* Port D Control (r/w) */ | ||
| 75 | |||
| 76 | |||
| 77 | /****************************************************************************/ | ||
| 78 | #endif /* m5272sim_h */ | ||
diff --git a/arch/m68knommu/include/asm/m527xsim.h b/arch/m68knommu/include/asm/m527xsim.h deleted file mode 100644 index 1f63ab3fb3e6..000000000000 --- a/arch/m68knommu/include/asm/m527xsim.h +++ /dev/null | |||
| @@ -1,74 +0,0 @@ | |||
| 1 | /****************************************************************************/ | ||
| 2 | |||
| 3 | /* | ||
| 4 | * m527xsim.h -- ColdFire 5270/5271 System Integration Module support. | ||
| 5 | * | ||
| 6 | * (C) Copyright 2004, Greg Ungerer (gerg@snapgear.com) | ||
| 7 | */ | ||
| 8 | |||
| 9 | /****************************************************************************/ | ||
| 10 | #ifndef m527xsim_h | ||
| 11 | #define m527xsim_h | ||
| 12 | /****************************************************************************/ | ||
| 13 | |||
| 14 | |||
| 15 | /* | ||
| 16 | * Define the 5270/5271 SIM register set addresses. | ||
| 17 | */ | ||
| 18 | #define MCFICM_INTC0 0x0c00 /* Base for Interrupt Ctrl 0 */ | ||
| 19 | #define MCFICM_INTC1 0x0d00 /* Base for Interrupt Ctrl 1 */ | ||
| 20 | #define MCFINTC_IPRH 0x00 /* Interrupt pending 32-63 */ | ||
| 21 | #define MCFINTC_IPRL 0x04 /* Interrupt pending 1-31 */ | ||
| 22 | #define MCFINTC_IMRH 0x08 /* Interrupt mask 32-63 */ | ||
| 23 | #define MCFINTC_IMRL 0x0c /* Interrupt mask 1-31 */ | ||
| 24 | #define MCFINTC_INTFRCH 0x10 /* Interrupt force 32-63 */ | ||
| 25 | #define MCFINTC_INTFRCL 0x14 /* Interrupt force 1-31 */ | ||
| 26 | #define MCFINTC_IRLR 0x18 /* */ | ||
| 27 | #define MCFINTC_IACKL 0x19 /* */ | ||
| 28 | #define MCFINTC_ICR0 0x40 /* Base ICR register */ | ||
| 29 | |||
| 30 | #define MCFINT_VECBASE 64 /* Vector base number */ | ||
| 31 | #define MCFINT_UART0 13 /* Interrupt number for UART0 */ | ||
| 32 | #define MCFINT_UART1 14 /* Interrupt number for UART1 */ | ||
| 33 | #define MCFINT_UART2 15 /* Interrupt number for UART2 */ | ||
| 34 | #define MCFINT_PIT1 36 /* Interrupt number for PIT1 */ | ||
| 35 | |||
| 36 | /* | ||
| 37 | * SDRAM configuration registers. | ||
| 38 | */ | ||
| 39 | #ifdef CONFIG_M5271 | ||
| 40 | #define MCFSIM_DCR 0x40 /* SDRAM control */ | ||
| 41 | #define MCFSIM_DACR0 0x48 /* SDRAM base address 0 */ | ||
| 42 | #define MCFSIM_DMR0 0x4c /* SDRAM address mask 0 */ | ||
| 43 | #define MCFSIM_DACR1 0x50 /* SDRAM base address 1 */ | ||
| 44 | #define MCFSIM_DMR1 0x54 /* SDRAM address mask 1 */ | ||
| 45 | #endif | ||
| 46 | #ifdef CONFIG_M5275 | ||
| 47 | #define MCFSIM_DMR 0x40 /* SDRAM mode */ | ||
| 48 | #define MCFSIM_DCR 0x44 /* SDRAM control */ | ||
| 49 | #define MCFSIM_DCFG1 0x48 /* SDRAM configuration 1 */ | ||
| 50 | #define MCFSIM_DCFG2 0x4c /* SDRAM configuration 2 */ | ||
| 51 | #define MCFSIM_DBAR0 0x50 /* SDRAM base address 0 */ | ||
| 52 | #define MCFSIM_DMR0 0x54 /* SDRAM address mask 0 */ | ||
| 53 | #define MCFSIM_DBAR1 0x58 /* SDRAM base address 1 */ | ||
| 54 | #define MCFSIM_DMR1 0x5c /* SDRAM address mask 1 */ | ||
| 55 | #endif | ||
| 56 | |||
| 57 | /* | ||
| 58 | * GPIO pins setups to enable the UARTs. | ||
| 59 | */ | ||
| 60 | #ifdef CONFIG_M5271 | ||
| 61 | #define MCF_GPIO_PAR_UART 0x100048 /* PAR UART address */ | ||
| 62 | #define UART0_ENABLE_MASK 0x000f | ||
| 63 | #define UART1_ENABLE_MASK 0x0ff0 | ||
| 64 | #define UART2_ENABLE_MASK 0x3000 | ||
| 65 | #endif | ||
| 66 | #ifdef CONFIG_M5275 | ||
| 67 | #define MCF_GPIO_PAR_UART 0x10007c /* PAR UART address */ | ||
| 68 | #define UART0_ENABLE_MASK 0x000f | ||
| 69 | #define UART1_ENABLE_MASK 0x00f0 | ||
| 70 | #define UART2_ENABLE_MASK 0x3f00 | ||
| 71 | #endif | ||
| 72 | |||
| 73 | /****************************************************************************/ | ||
| 74 | #endif /* m527xsim_h */ | ||
diff --git a/arch/m68knommu/include/asm/m528xsim.h b/arch/m68knommu/include/asm/m528xsim.h deleted file mode 100644 index 28bf783a5d6d..000000000000 --- a/arch/m68knommu/include/asm/m528xsim.h +++ /dev/null | |||
| @@ -1,159 +0,0 @@ | |||
| 1 | /****************************************************************************/ | ||
| 2 | |||
| 3 | /* | ||
| 4 | * m528xsim.h -- ColdFire 5280/5282 System Integration Module support. | ||
| 5 | * | ||
| 6 | * (C) Copyright 2003, Greg Ungerer (gerg@snapgear.com) | ||
| 7 | */ | ||
| 8 | |||
| 9 | /****************************************************************************/ | ||
| 10 | #ifndef m528xsim_h | ||
| 11 | #define m528xsim_h | ||
| 12 | /****************************************************************************/ | ||
| 13 | |||
| 14 | |||
| 15 | /* | ||
| 16 | * Define the 5280/5282 SIM register set addresses. | ||
| 17 | */ | ||
| 18 | #define MCFICM_INTC0 0x0c00 /* Base for Interrupt Ctrl 0 */ | ||
| 19 | #define MCFICM_INTC1 0x0d00 /* Base for Interrupt Ctrl 0 */ | ||
| 20 | #define MCFINTC_IPRH 0x00 /* Interrupt pending 32-63 */ | ||
| 21 | #define MCFINTC_IPRL 0x04 /* Interrupt pending 1-31 */ | ||
| 22 | #define MCFINTC_IMRH 0x08 /* Interrupt mask 32-63 */ | ||
| 23 | #define MCFINTC_IMRL 0x0c /* Interrupt mask 1-31 */ | ||
| 24 | #define MCFINTC_INTFRCH 0x10 /* Interrupt force 32-63 */ | ||
| 25 | #define MCFINTC_INTFRCL 0x14 /* Interrupt force 1-31 */ | ||
| 26 | #define MCFINTC_IRLR 0x18 /* */ | ||
| 27 | #define MCFINTC_IACKL 0x19 /* */ | ||
| 28 | #define MCFINTC_ICR0 0x40 /* Base ICR register */ | ||
| 29 | |||
| 30 | #define MCFINT_VECBASE 64 /* Vector base number */ | ||
| 31 | #define MCFINT_UART0 13 /* Interrupt number for UART0 */ | ||
| 32 | #define MCFINT_PIT1 55 /* Interrupt number for PIT1 */ | ||
| 33 | |||
| 34 | /* | ||
| 35 | * SDRAM configuration registers. | ||
| 36 | */ | ||
| 37 | #define MCFSIM_DCR 0x44 /* SDRAM control */ | ||
| 38 | #define MCFSIM_DACR0 0x48 /* SDRAM base address 0 */ | ||
| 39 | #define MCFSIM_DMR0 0x4c /* SDRAM address mask 0 */ | ||
| 40 | #define MCFSIM_DACR1 0x50 /* SDRAM base address 1 */ | ||
| 41 | #define MCFSIM_DMR1 0x54 /* SDRAM address mask 1 */ | ||
| 42 | |||
| 43 | /* | ||
| 44 | * Derek Cheung - 6 Feb 2005 | ||
| 45 | * add I2C and QSPI register definition using Freescale's MCF5282 | ||
| 46 | */ | ||
| 47 | /* set Port AS pin for I2C or UART */ | ||
| 48 | #define MCF5282_GPIO_PASPAR (volatile u16 *) (MCF_IPSBAR + 0x00100056) | ||
| 49 | |||
| 50 | /* Port UA Pin Assignment Register (8 Bit) */ | ||
| 51 | #define MCF5282_GPIO_PUAPAR 0x10005C | ||
| 52 | |||
| 53 | /* Interrupt Mask Register Register Low */ | ||
| 54 | #define MCF5282_INTC0_IMRL (volatile u32 *) (MCF_IPSBAR + 0x0C0C) | ||
| 55 | /* Interrupt Control Register 7 */ | ||
| 56 | #define MCF5282_INTC0_ICR17 (volatile u8 *) (MCF_IPSBAR + 0x0C51) | ||
| 57 | |||
| 58 | |||
| 59 | |||
| 60 | /********************************************************************* | ||
| 61 | * | ||
| 62 | * Inter-IC (I2C) Module | ||
| 63 | * | ||
| 64 | *********************************************************************/ | ||
| 65 | /* Read/Write access macros for general use */ | ||
| 66 | #define MCF5282_I2C_I2ADR (volatile u8 *) (MCF_IPSBAR + 0x0300) // Address | ||
| 67 | #define MCF5282_I2C_I2FDR (volatile u8 *) (MCF_IPSBAR + 0x0304) // Freq Divider | ||
| 68 | #define MCF5282_I2C_I2CR (volatile u8 *) (MCF_IPSBAR + 0x0308) // Control | ||
| 69 | #define MCF5282_I2C_I2SR (volatile u8 *) (MCF_IPSBAR + 0x030C) // Status | ||
| 70 | #define MCF5282_I2C_I2DR (volatile u8 *) (MCF_IPSBAR + 0x0310) // Data I/O | ||
| 71 | |||
| 72 | /* Bit level definitions and macros */ | ||
| 73 | #define MCF5282_I2C_I2ADR_ADDR(x) (((x)&0x7F)<<0x01) | ||
| 74 | |||
| 75 | #define MCF5282_I2C_I2FDR_IC(x) (((x)&0x3F)) | ||
| 76 | |||
| 77 | #define MCF5282_I2C_I2CR_IEN (0x80) // I2C enable | ||
| 78 | #define MCF5282_I2C_I2CR_IIEN (0x40) // interrupt enable | ||
| 79 | #define MCF5282_I2C_I2CR_MSTA (0x20) // master/slave mode | ||
| 80 | #define MCF5282_I2C_I2CR_MTX (0x10) // transmit/receive mode | ||
| 81 | #define MCF5282_I2C_I2CR_TXAK (0x08) // transmit acknowledge enable | ||
| 82 | #define MCF5282_I2C_I2CR_RSTA (0x04) // repeat start | ||
| 83 | |||
| 84 | #define MCF5282_I2C_I2SR_ICF (0x80) // data transfer bit | ||
| 85 | #define MCF5282_I2C_I2SR_IAAS (0x40) // I2C addressed as a slave | ||
| 86 | #define MCF5282_I2C_I2SR_IBB (0x20) // I2C bus busy | ||
| 87 | #define MCF5282_I2C_I2SR_IAL (0x10) // aribitration lost | ||
| 88 | #define MCF5282_I2C_I2SR_SRW (0x04) // slave read/write | ||
| 89 | #define MCF5282_I2C_I2SR_IIF (0x02) // I2C interrupt | ||
| 90 | #define MCF5282_I2C_I2SR_RXAK (0x01) // received acknowledge | ||
| 91 | |||
| 92 | |||
| 93 | |||
| 94 | /********************************************************************* | ||
| 95 | * | ||
| 96 | * Queued Serial Peripheral Interface (QSPI) Module | ||
| 97 | * | ||
| 98 | *********************************************************************/ | ||
| 99 | /* Derek - 21 Feb 2005 */ | ||
| 100 | /* change to the format used in I2C */ | ||
| 101 | /* Read/Write access macros for general use */ | ||
| 102 | #define MCF5282_QSPI_QMR MCF_IPSBAR + 0x0340 | ||
| 103 | #define MCF5282_QSPI_QDLYR MCF_IPSBAR + 0x0344 | ||
| 104 | #define MCF5282_QSPI_QWR MCF_IPSBAR + 0x0348 | ||
| 105 | #define MCF5282_QSPI_QIR MCF_IPSBAR + 0x034C | ||
| 106 | #define MCF5282_QSPI_QAR MCF_IPSBAR + 0x0350 | ||
| 107 | #define MCF5282_QSPI_QDR MCF_IPSBAR + 0x0354 | ||
| 108 | #define MCF5282_QSPI_QCR MCF_IPSBAR + 0x0354 | ||
| 109 | |||
| 110 | /* Bit level definitions and macros */ | ||
| 111 | #define MCF5282_QSPI_QMR_MSTR (0x8000) | ||
| 112 | #define MCF5282_QSPI_QMR_DOHIE (0x4000) | ||
| 113 | #define MCF5282_QSPI_QMR_BITS_16 (0x0000) | ||
| 114 | #define MCF5282_QSPI_QMR_BITS_8 (0x2000) | ||
| 115 | #define MCF5282_QSPI_QMR_BITS_9 (0x2400) | ||
| 116 | #define MCF5282_QSPI_QMR_BITS_10 (0x2800) | ||
| 117 | #define MCF5282_QSPI_QMR_BITS_11 (0x2C00) | ||
| 118 | #define MCF5282_QSPI_QMR_BITS_12 (0x3000) | ||
| 119 | #define MCF5282_QSPI_QMR_BITS_13 (0x3400) | ||
| 120 | #define MCF5282_QSPI_QMR_BITS_14 (0x3800) | ||
| 121 | #define MCF5282_QSPI_QMR_BITS_15 (0x3C00) | ||
| 122 | #define MCF5282_QSPI_QMR_CPOL (0x0200) | ||
| 123 | #define MCF5282_QSPI_QMR_CPHA (0x0100) | ||
| 124 | #define MCF5282_QSPI_QMR_BAUD(x) (((x)&0x00FF)) | ||
| 125 | |||
| 126 | #define MCF5282_QSPI_QDLYR_SPE (0x80) | ||
| 127 | #define MCF5282_QSPI_QDLYR_QCD(x) (((x)&0x007F)<<8) | ||
| 128 | #define MCF5282_QSPI_QDLYR_DTL(x) (((x)&0x00FF)) | ||
| 129 | |||
| 130 | #define MCF5282_QSPI_QWR_HALT (0x8000) | ||
| 131 | #define MCF5282_QSPI_QWR_WREN (0x4000) | ||
| 132 | #define MCF5282_QSPI_QWR_WRTO (0x2000) | ||
| 133 | #define MCF5282_QSPI_QWR_CSIV (0x1000) | ||
| 134 | #define MCF5282_QSPI_QWR_ENDQP(x) (((x)&0x000F)<<8) | ||
| 135 | #define MCF5282_QSPI_QWR_CPTQP(x) (((x)&0x000F)<<4) | ||
| 136 | #define MCF5282_QSPI_QWR_NEWQP(x) (((x)&0x000F)) | ||
| 137 | |||
| 138 | #define MCF5282_QSPI_QIR_WCEFB (0x8000) | ||
| 139 | #define MCF5282_QSPI_QIR_ABRTB (0x4000) | ||
| 140 | #define MCF5282_QSPI_QIR_ABRTL (0x1000) | ||
| 141 | #define MCF5282_QSPI_QIR_WCEFE (0x0800) | ||
| 142 | #define MCF5282_QSPI_QIR_ABRTE (0x0400) | ||
| 143 | #define MCF5282_QSPI_QIR_SPIFE (0x0100) | ||
| 144 | #define MCF5282_QSPI_QIR_WCEF (0x0008) | ||
| 145 | #define MCF5282_QSPI_QIR_ABRT (0x0004) | ||
| 146 | #define MCF5282_QSPI_QIR_SPIF (0x0001) | ||
| 147 | |||
| 148 | #define MCF5282_QSPI_QAR_ADDR(x) (((x)&0x003F)) | ||
| 149 | |||
| 150 | #define MCF5282_QSPI_QDR_COMMAND(x) (((x)&0xFF00)) | ||
| 151 | #define MCF5282_QSPI_QCR_DATA(x) (((x)&0x00FF)<<8) | ||
| 152 | #define MCF5282_QSPI_QCR_CONT (0x8000) | ||
| 153 | #define MCF5282_QSPI_QCR_BITSE (0x4000) | ||
| 154 | #define MCF5282_QSPI_QCR_DT (0x2000) | ||
| 155 | #define MCF5282_QSPI_QCR_DSCK (0x1000) | ||
| 156 | #define MCF5282_QSPI_QCR_CS (((x)&0x000F)<<8) | ||
| 157 | |||
| 158 | /****************************************************************************/ | ||
| 159 | #endif /* m528xsim_h */ | ||
diff --git a/arch/m68knommu/include/asm/m5307sim.h b/arch/m68knommu/include/asm/m5307sim.h deleted file mode 100644 index 5886728409c0..000000000000 --- a/arch/m68knommu/include/asm/m5307sim.h +++ /dev/null | |||
| @@ -1,181 +0,0 @@ | |||
| 1 | /****************************************************************************/ | ||
| 2 | |||
| 3 | /* | ||
| 4 | * m5307sim.h -- ColdFire 5307 System Integration Module support. | ||
| 5 | * | ||
| 6 | * (C) Copyright 1999, Moreton Bay Ventures Pty Ltd. | ||
| 7 | * (C) Copyright 1999, Lineo (www.lineo.com) | ||
| 8 | * | ||
| 9 | * Modified by David W. Miller for the MCF5307 Eval Board. | ||
| 10 | */ | ||
| 11 | |||
| 12 | /****************************************************************************/ | ||
| 13 | #ifndef m5307sim_h | ||
| 14 | #define m5307sim_h | ||
| 15 | /****************************************************************************/ | ||
| 16 | |||
| 17 | /* | ||
| 18 | * Define the 5307 SIM register set addresses. | ||
| 19 | */ | ||
| 20 | #define MCFSIM_RSR 0x00 /* Reset Status reg (r/w) */ | ||
| 21 | #define MCFSIM_SYPCR 0x01 /* System Protection reg (r/w)*/ | ||
| 22 | #define MCFSIM_SWIVR 0x02 /* SW Watchdog intr reg (r/w) */ | ||
| 23 | #define MCFSIM_SWSR 0x03 /* SW Watchdog service (r/w) */ | ||
| 24 | #define MCFSIM_PAR 0x04 /* Pin Assignment reg (r/w) */ | ||
| 25 | #define MCFSIM_IRQPAR 0x06 /* Interrupt Assignment reg (r/w) */ | ||
| 26 | #define MCFSIM_PLLCR 0x08 /* PLL Controll Reg*/ | ||
| 27 | #define MCFSIM_MPARK 0x0C /* BUS Master Control Reg*/ | ||
| 28 | #define MCFSIM_IPR 0x40 /* Interrupt Pend reg (r/w) */ | ||
| 29 | #define MCFSIM_IMR 0x44 /* Interrupt Mask reg (r/w) */ | ||
| 30 | #define MCFSIM_AVR 0x4b /* Autovector Ctrl reg (r/w) */ | ||
| 31 | #define MCFSIM_ICR0 0x4c /* Intr Ctrl reg 0 (r/w) */ | ||
| 32 | #define MCFSIM_ICR1 0x4d /* Intr Ctrl reg 1 (r/w) */ | ||
| 33 | #define MCFSIM_ICR2 0x4e /* Intr Ctrl reg 2 (r/w) */ | ||
| 34 | #define MCFSIM_ICR3 0x4f /* Intr Ctrl reg 3 (r/w) */ | ||
| 35 | #define MCFSIM_ICR4 0x50 /* Intr Ctrl reg 4 (r/w) */ | ||
| 36 | #define MCFSIM_ICR5 0x51 /* Intr Ctrl reg 5 (r/w) */ | ||
| 37 | #define MCFSIM_ICR6 0x52 /* Intr Ctrl reg 6 (r/w) */ | ||
| 38 | #define MCFSIM_ICR7 0x53 /* Intr Ctrl reg 7 (r/w) */ | ||
| 39 | #define MCFSIM_ICR8 0x54 /* Intr Ctrl reg 8 (r/w) */ | ||
| 40 | #define MCFSIM_ICR9 0x55 /* Intr Ctrl reg 9 (r/w) */ | ||
| 41 | #define MCFSIM_ICR10 0x56 /* Intr Ctrl reg 10 (r/w) */ | ||
| 42 | #define MCFSIM_ICR11 0x57 /* Intr Ctrl reg 11 (r/w) */ | ||
| 43 | |||
| 44 | #define MCFSIM_CSAR0 0x80 /* CS 0 Address 0 reg (r/w) */ | ||
| 45 | #define MCFSIM_CSMR0 0x84 /* CS 0 Mask 0 reg (r/w) */ | ||
| 46 | #define MCFSIM_CSCR0 0x8a /* CS 0 Control reg (r/w) */ | ||
| 47 | #define MCFSIM_CSAR1 0x8c /* CS 1 Address reg (r/w) */ | ||
| 48 | #define MCFSIM_CSMR1 0x90 /* CS 1 Mask reg (r/w) */ | ||
| 49 | #define MCFSIM_CSCR1 0x96 /* CS 1 Control reg (r/w) */ | ||
| 50 | |||
| 51 | #ifdef CONFIG_OLDMASK | ||
| 52 | #define MCFSIM_CSBAR 0x98 /* CS Base Address reg (r/w) */ | ||
| 53 | #define MCFSIM_CSBAMR 0x9c /* CS Base Mask reg (r/w) */ | ||
| 54 | #define MCFSIM_CSMR2 0x9e /* CS 2 Mask reg (r/w) */ | ||
| 55 | #define MCFSIM_CSCR2 0xa2 /* CS 2 Control reg (r/w) */ | ||
| 56 | #define MCFSIM_CSMR3 0xaa /* CS 3 Mask reg (r/w) */ | ||
| 57 | #define MCFSIM_CSCR3 0xae /* CS 3 Control reg (r/w) */ | ||
| 58 | #define MCFSIM_CSMR4 0xb6 /* CS 4 Mask reg (r/w) */ | ||
| 59 | #define MCFSIM_CSCR4 0xba /* CS 4 Control reg (r/w) */ | ||
| 60 | #define MCFSIM_CSMR5 0xc2 /* CS 5 Mask reg (r/w) */ | ||
| 61 | #define MCFSIM_CSCR5 0xc6 /* CS 5 Control reg (r/w) */ | ||
| 62 | #define MCFSIM_CSMR6 0xce /* CS 6 Mask reg (r/w) */ | ||
| 63 | #define MCFSIM_CSCR6 0xd2 /* CS 6 Control reg (r/w) */ | ||
| 64 | #define MCFSIM_CSMR7 0xda /* CS 7 Mask reg (r/w) */ | ||
| 65 | #define MCFSIM_CSCR7 0xde /* CS 7 Control reg (r/w) */ | ||
| 66 | #else | ||
| 67 | #define MCFSIM_CSAR2 0x98 /* CS 2 Address reg (r/w) */ | ||
| 68 | #define MCFSIM_CSMR2 0x9c /* CS 2 Mask reg (r/w) */ | ||
| 69 | #define MCFSIM_CSCR2 0xa2 /* CS 2 Control reg (r/w) */ | ||
| 70 | #define MCFSIM_CSAR3 0xa4 /* CS 3 Address reg (r/w) */ | ||
| 71 | #define MCFSIM_CSMR3 0xa8 /* CS 3 Mask reg (r/w) */ | ||
| 72 | #define MCFSIM_CSCR3 0xae /* CS 3 Control reg (r/w) */ | ||
| 73 | #define MCFSIM_CSAR4 0xb0 /* CS 4 Address reg (r/w) */ | ||
| 74 | #define MCFSIM_CSMR4 0xb4 /* CS 4 Mask reg (r/w) */ | ||
| 75 | #define MCFSIM_CSCR4 0xba /* CS 4 Control reg (r/w) */ | ||
| 76 | #define MCFSIM_CSAR5 0xbc /* CS 5 Address reg (r/w) */ | ||
| 77 | #define MCFSIM_CSMR5 0xc0 /* CS 5 Mask reg (r/w) */ | ||
| 78 | #define MCFSIM_CSCR5 0xc6 /* CS 5 Control reg (r/w) */ | ||
| 79 | #define MCFSIM_CSAR6 0xc8 /* CS 6 Address reg (r/w) */ | ||
| 80 | #define MCFSIM_CSMR6 0xcc /* CS 6 Mask reg (r/w) */ | ||
| 81 | #define MCFSIM_CSCR6 0xd2 /* CS 6 Control reg (r/w) */ | ||
| 82 | #define MCFSIM_CSAR7 0xd4 /* CS 7 Address reg (r/w) */ | ||
| 83 | #define MCFSIM_CSMR7 0xd8 /* CS 7 Mask reg (r/w) */ | ||
| 84 | #define MCFSIM_CSCR7 0xde /* CS 7 Control reg (r/w) */ | ||
| 85 | #endif /* CONFIG_OLDMASK */ | ||
| 86 | |||
| 87 | #define MCFSIM_DCR 0x100 /* DRAM Control reg (r/w) */ | ||
| 88 | #define MCFSIM_DACR0 0x108 /* DRAM 0 Addr and Ctrl (r/w) */ | ||
| 89 | #define MCFSIM_DMR0 0x10c /* DRAM 0 Mask reg (r/w) */ | ||
| 90 | #define MCFSIM_DACR1 0x110 /* DRAM 1 Addr and Ctrl (r/w) */ | ||
| 91 | #define MCFSIM_DMR1 0x114 /* DRAM 1 Mask reg (r/w) */ | ||
| 92 | |||
| 93 | #define MCFSIM_PADDR 0x244 /* Parallel Direction (r/w) */ | ||
| 94 | #define MCFSIM_PADAT 0x248 /* Parallel Data (r/w) */ | ||
| 95 | |||
| 96 | |||
| 97 | /* Definition offset address for CS2-7 -- old mask 5307 */ | ||
| 98 | |||
| 99 | #define MCF5307_CS2 (0x400000) | ||
| 100 | #define MCF5307_CS3 (0x600000) | ||
| 101 | #define MCF5307_CS4 (0x800000) | ||
| 102 | #define MCF5307_CS5 (0xA00000) | ||
| 103 | #define MCF5307_CS6 (0xC00000) | ||
| 104 | #define MCF5307_CS7 (0xE00000) | ||
| 105 | |||
| 106 | |||
| 107 | /* | ||
| 108 | * Some symbol defines for the above... | ||
| 109 | */ | ||
| 110 | #define MCFSIM_SWDICR MCFSIM_ICR0 /* Watchdog timer ICR */ | ||
| 111 | #define MCFSIM_TIMER1ICR MCFSIM_ICR1 /* Timer 1 ICR */ | ||
| 112 | #define MCFSIM_TIMER2ICR MCFSIM_ICR2 /* Timer 2 ICR */ | ||
| 113 | #define MCFSIM_UART1ICR MCFSIM_ICR4 /* UART 1 ICR */ | ||
| 114 | #define MCFSIM_UART2ICR MCFSIM_ICR5 /* UART 2 ICR */ | ||
| 115 | #define MCFSIM_DMA0ICR MCFSIM_ICR6 /* DMA 0 ICR */ | ||
| 116 | #define MCFSIM_DMA1ICR MCFSIM_ICR7 /* DMA 1 ICR */ | ||
| 117 | #define MCFSIM_DMA2ICR MCFSIM_ICR8 /* DMA 2 ICR */ | ||
| 118 | #define MCFSIM_DMA3ICR MCFSIM_ICR9 /* DMA 3 ICR */ | ||
| 119 | |||
| 120 | #if defined(CONFIG_M5307) | ||
| 121 | #define MCFSIM_IMR_MASKALL 0x3fffe /* All SIM intr sources */ | ||
| 122 | #endif | ||
| 123 | |||
| 124 | /* | ||
| 125 | * Macro to set IMR register. It is 32 bits on the 5307. | ||
| 126 | */ | ||
| 127 | #define mcf_getimr() \ | ||
| 128 | *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR)) | ||
| 129 | |||
| 130 | #define mcf_setimr(imr) \ | ||
| 131 | *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR)) = (imr); | ||
| 132 | |||
| 133 | #define mcf_getipr() \ | ||
| 134 | *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IPR)) | ||
| 135 | |||
| 136 | |||
| 137 | /* | ||
| 138 | * Some symbol defines for the Parallel Port Pin Assignment Register | ||
| 139 | */ | ||
| 140 | #define MCFSIM_PAR_DREQ0 0x40 /* Set to select DREQ0 input */ | ||
| 141 | /* Clear to select par I/O */ | ||
| 142 | #define MCFSIM_PAR_DREQ1 0x20 /* Select DREQ1 input */ | ||
| 143 | /* Clear to select par I/O */ | ||
| 144 | |||
| 145 | /* | ||
| 146 | * Defines for the IRQPAR Register | ||
| 147 | */ | ||
| 148 | #define IRQ5_LEVEL4 0x80 | ||
| 149 | #define IRQ3_LEVEL6 0x40 | ||
| 150 | #define IRQ1_LEVEL2 0x20 | ||
| 151 | |||
| 152 | |||
| 153 | /* | ||
| 154 | * Define the Cache register flags. | ||
| 155 | */ | ||
| 156 | #define CACR_EC (1<<31) | ||
| 157 | #define CACR_ESB (1<<29) | ||
| 158 | #define CACR_DPI (1<<28) | ||
| 159 | #define CACR_HLCK (1<<27) | ||
| 160 | #define CACR_CINVA (1<<24) | ||
| 161 | #define CACR_DNFB (1<<10) | ||
| 162 | #define CACR_DCM_WTHRU (0<<8) | ||
| 163 | #define CACR_DCM_WBACK (1<<8) | ||
| 164 | #define CACR_DCM_OFF_PRE (2<<8) | ||
| 165 | #define CACR_DCM_OFF_IMP (3<<8) | ||
| 166 | #define CACR_DW (1<<5) | ||
| 167 | |||
| 168 | #define ACR_BASE_POS 24 | ||
| 169 | #define ACR_MASK_POS 16 | ||
| 170 | #define ACR_ENABLE (1<<15) | ||
| 171 | #define ACR_USER (0<<13) | ||
| 172 | #define ACR_SUPER (1<<13) | ||
| 173 | #define ACR_ANY (2<<13) | ||
| 174 | #define ACR_CM_WTHRU (0<<5) | ||
| 175 | #define ACR_CM_WBACK (1<<5) | ||
| 176 | #define ACR_CM_OFF_PRE (2<<5) | ||
| 177 | #define ACR_CM_OFF_IMP (3<<5) | ||
| 178 | #define ACR_WPROTECT (1<<2) | ||
| 179 | |||
| 180 | /****************************************************************************/ | ||
| 181 | #endif /* m5307sim_h */ | ||
diff --git a/arch/m68knommu/include/asm/m532xsim.h b/arch/m68knommu/include/asm/m532xsim.h deleted file mode 100644 index 1835fd20a82c..000000000000 --- a/arch/m68knommu/include/asm/m532xsim.h +++ /dev/null | |||
| @@ -1,2238 +0,0 @@ | |||
| 1 | /****************************************************************************/ | ||
| 2 | |||
| 3 | /* | ||
| 4 | * m532xsim.h -- ColdFire 5329 registers | ||
| 5 | */ | ||
| 6 | |||
| 7 | /****************************************************************************/ | ||
| 8 | #ifndef m532xsim_h | ||
| 9 | #define m532xsim_h | ||
| 10 | /****************************************************************************/ | ||
| 11 | |||
| 12 | #define MCF_REG32(x) (*(volatile unsigned long *)(x)) | ||
| 13 | #define MCF_REG16(x) (*(volatile unsigned short *)(x)) | ||
| 14 | #define MCF_REG08(x) (*(volatile unsigned char *)(x)) | ||
| 15 | |||
| 16 | #define MCFINT_VECBASE 64 | ||
| 17 | #define MCFINT_UART0 26 /* Interrupt number for UART0 */ | ||
| 18 | #define MCFINT_UART1 27 /* Interrupt number for UART1 */ | ||
| 19 | |||
| 20 | #define MCF_WTM_WCR MCF_REG16(0xFC098000) | ||
| 21 | |||
| 22 | /* | ||
| 23 | * Define the 532x SIM register set addresses. | ||
| 24 | */ | ||
| 25 | #define MCFSIM_IPRL 0xFC048004 | ||
| 26 | #define MCFSIM_IPRH 0xFC048000 | ||
| 27 | #define MCFSIM_IPR MCFSIM_IPRL | ||
| 28 | #define MCFSIM_IMRL 0xFC04800C | ||
| 29 | #define MCFSIM_IMRH 0xFC048008 | ||
| 30 | #define MCFSIM_IMR MCFSIM_IMRL | ||
| 31 | #define MCFSIM_ICR0 0xFC048040 | ||
| 32 | #define MCFSIM_ICR1 0xFC048041 | ||
| 33 | #define MCFSIM_ICR2 0xFC048042 | ||
| 34 | #define MCFSIM_ICR3 0xFC048043 | ||
| 35 | #define MCFSIM_ICR4 0xFC048044 | ||
| 36 | #define MCFSIM_ICR5 0xFC048045 | ||
| 37 | #define MCFSIM_ICR6 0xFC048046 | ||
| 38 | #define MCFSIM_ICR7 0xFC048047 | ||
| 39 | #define MCFSIM_ICR8 0xFC048048 | ||
| 40 | #define MCFSIM_ICR9 0xFC048049 | ||
| 41 | #define MCFSIM_ICR10 0xFC04804A | ||
| 42 | #define MCFSIM_ICR11 0xFC04804B | ||
| 43 | |||
| 44 | /* | ||
| 45 | * Some symbol defines for the above... | ||
| 46 | */ | ||
| 47 | #define MCFSIM_SWDICR MCFSIM_ICR0 /* Watchdog timer ICR */ | ||
| 48 | #define MCFSIM_TIMER1ICR MCFSIM_ICR1 /* Timer 1 ICR */ | ||
| 49 | #define MCFSIM_TIMER2ICR MCFSIM_ICR2 /* Timer 2 ICR */ | ||
| 50 | #define MCFSIM_UART1ICR MCFSIM_ICR4 /* UART 1 ICR */ | ||
| 51 | #define MCFSIM_UART2ICR MCFSIM_ICR5 /* UART 2 ICR */ | ||
| 52 | #define MCFSIM_DMA0ICR MCFSIM_ICR6 /* DMA 0 ICR */ | ||
| 53 | #define MCFSIM_DMA1ICR MCFSIM_ICR7 /* DMA 1 ICR */ | ||
| 54 | #define MCFSIM_DMA2ICR MCFSIM_ICR8 /* DMA 2 ICR */ | ||
| 55 | #define MCFSIM_DMA3ICR MCFSIM_ICR9 /* DMA 3 ICR */ | ||
| 56 | |||
| 57 | |||
| 58 | #define MCFSIM_IMR_MASKALL 0xFFFFFFFF /* All SIM intr sources */ | ||
| 59 | |||
| 60 | #define MCFSIM_IMR_SIMR0 0xFC04801C | ||
| 61 | #define MCFSIM_IMR_SIMR1 0xFC04C01C | ||
| 62 | #define MCFSIM_IMR_CIMR0 0xFC04801D | ||
| 63 | #define MCFSIM_IMR_CIMR1 0xFC04C01D | ||
| 64 | |||
| 65 | #define MCFSIM_ICR_TIMER1 (0xFC048040+32) | ||
| 66 | #define MCFSIM_ICR_TIMER2 (0xFC048040+33) | ||
| 67 | |||
| 68 | |||
| 69 | /* | ||
| 70 | * Macro to set IMR register. It is 32 bits on the 5307. | ||
| 71 | */ | ||
| 72 | #define mcf_getimr() \ | ||
| 73 | *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR)) | ||
| 74 | |||
| 75 | #define mcf_setimr(imr) \ | ||
| 76 | *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR)) = (imr); | ||
| 77 | |||
| 78 | #define mcf_getipr() \ | ||
| 79 | *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IPR)) | ||
| 80 | |||
| 81 | #define mcf_getiprl() \ | ||
| 82 | *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IPRL)) | ||
| 83 | |||
| 84 | #define mcf_getiprh() \ | ||
| 85 | *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IPRH)) | ||
| 86 | |||
| 87 | |||
| 88 | #define mcf_enable_irq0(irq) \ | ||
| 89 | *((volatile unsigned char*) (MCFSIM_IMR_CIMR0)) = (irq); | ||
| 90 | |||
| 91 | #define mcf_enable_irq1(irq) \ | ||
| 92 | *((volatile unsigned char*) (MCFSIM_IMR_CIMR1)) = (irq); | ||
| 93 | |||
| 94 | #define mcf_disable_irq0(irq) \ | ||
| 95 | *((volatile unsigned char*) (MCFSIM_IMR_SIMR0)) = (irq); | ||
| 96 | |||
| 97 | #define mcf_disable_irq1(irq) \ | ||
| 98 | *((volatile unsigned char*) (MCFSIM_IMR_SIMR1)) = (irq); | ||
| 99 | |||
| 100 | /* | ||
| 101 | * Define the Cache register flags. | ||
| 102 | */ | ||
| 103 | #define CACR_EC (1<<31) | ||
| 104 | #define CACR_ESB (1<<29) | ||
| 105 | #define CACR_DPI (1<<28) | ||
| 106 | #define CACR_HLCK (1<<27) | ||
| 107 | #define CACR_CINVA (1<<24) | ||
| 108 | #define CACR_DNFB (1<<10) | ||
| 109 | #define CACR_DCM_WTHRU (0<<8) | ||
| 110 | #define CACR_DCM_WBACK (1<<8) | ||
| 111 | #define CACR_DCM_OFF_PRE (2<<8) | ||
| 112 | #define CACR_DCM_OFF_IMP (3<<8) | ||
| 113 | #define CACR_DW (1<<5) | ||
| 114 | |||
| 115 | #define ACR_BASE_POS 24 | ||
| 116 | #define ACR_MASK_POS 16 | ||
| 117 | #define ACR_ENABLE (1<<15) | ||
| 118 | #define ACR_USER (0<<13) | ||
| 119 | #define ACR_SUPER (1<<13) | ||
| 120 | #define ACR_ANY (2<<13) | ||
| 121 | #define ACR_CM_WTHRU (0<<5) | ||
| 122 | #define ACR_CM_WBACK (1<<5) | ||
| 123 | #define ACR_CM_OFF_PRE (2<<5) | ||
| 124 | #define ACR_CM_OFF_IMP (3<<5) | ||
| 125 | #define ACR_WPROTECT (1<<2) | ||
| 126 | |||
| 127 | /********************************************************************* | ||
| 128 | * | ||
| 129 | * Inter-IC (I2C) Module | ||
| 130 | * | ||
| 131 | *********************************************************************/ | ||
| 132 | |||
| 133 | /* Read/Write access macros for general use */ | ||
| 134 | #define MCF532x_I2C_I2ADR (volatile u8 *) (0xFC058000) // Address | ||
| 135 | #define MCF532x_I2C_I2FDR (volatile u8 *) (0xFC058004) // Freq Divider | ||
| 136 | #define MCF532x_I2C_I2CR (volatile u8 *) (0xFC058008) // Control | ||
| 137 | #define MCF532x_I2C_I2SR (volatile u8 *) (0xFC05800C) // Status | ||
| 138 | #define MCF532x_I2C_I2DR (volatile u8 *) (0xFC058010) // Data I/O | ||
| 139 | |||
| 140 | /* Bit level definitions and macros */ | ||
| 141 | #define MCF532x_I2C_I2ADR_ADDR(x) (((x)&0x7F)<<0x01) | ||
| 142 | |||
| 143 | #define MCF532x_I2C_I2FDR_IC(x) (((x)&0x3F)) | ||
| 144 | |||
| 145 | #define MCF532x_I2C_I2CR_IEN (0x80) // I2C enable | ||
| 146 | #define MCF532x_I2C_I2CR_IIEN (0x40) // interrupt enable | ||
| 147 | #define MCF532x_I2C_I2CR_MSTA (0x20) // master/slave mode | ||
| 148 | #define MCF532x_I2C_I2CR_MTX (0x10) // transmit/receive mode | ||
| 149 | #define MCF532x_I2C_I2CR_TXAK (0x08) // transmit acknowledge enable | ||
| 150 | #define MCF532x_I2C_I2CR_RSTA (0x04) // repeat start | ||
| 151 | |||
| 152 | #define MCF532x_I2C_I2SR_ICF (0x80) // data transfer bit | ||
| 153 | #define MCF532x_I2C_I2SR_IAAS (0x40) // I2C addressed as a slave | ||
| 154 | #define MCF532x_I2C_I2SR_IBB (0x20) // I2C bus busy | ||
| 155 | #define MCF532x_I2C_I2SR_IAL (0x10) // aribitration lost | ||
| 156 | #define MCF532x_I2C_I2SR_SRW (0x04) // slave read/write | ||
| 157 | #define MCF532x_I2C_I2SR_IIF (0x02) // I2C interrupt | ||
| 158 | #define MCF532x_I2C_I2SR_RXAK (0x01) // received acknowledge | ||
| 159 | |||
| 160 | #define MCF532x_PAR_FECI2C (volatile u8 *) (0xFC0A4053) | ||
| 161 | |||
| 162 | |||
| 163 | /* | ||
| 164 | * The M5329EVB board needs a help getting its devices initialized | ||
| 165 | * at kernel start time if dBUG doesn't set it up (for example | ||
| 166 | * it is not used), so we need to do it manually. | ||
| 167 | */ | ||
| 168 | #ifdef __ASSEMBLER__ | ||
| 169 | .macro m5329EVB_setup | ||
| 170 | movel #0xFC098000, %a7 | ||
| 171 | movel #0x0, (%a7) | ||
| 172 | #define CORE_SRAM 0x80000000 | ||
| 173 | #define CORE_SRAM_SIZE 0x8000 | ||
| 174 | movel #CORE_SRAM, %d0 | ||
| 175 | addl #0x221, %d0 | ||
| 176 | movec %d0,%RAMBAR1 | ||
| 177 | movel #CORE_SRAM, %sp | ||
| 178 | addl #CORE_SRAM_SIZE, %sp | ||
| 179 | jsr sysinit | ||
| 180 | .endm | ||
| 181 | #define PLATFORM_SETUP m5329EVB_setup | ||
| 182 | |||
| 183 | #endif /* __ASSEMBLER__ */ | ||
| 184 | |||
| 185 | /********************************************************************* | ||
| 186 | * | ||
| 187 | * Chip Configuration Module (CCM) | ||
| 188 | * | ||
| 189 | *********************************************************************/ | ||
| 190 | |||
| 191 | /* Register read/write macros */ | ||
| 192 | #define MCF_CCM_CCR MCF_REG16(0xFC0A0004) | ||
| 193 | #define MCF_CCM_RCON MCF_REG16(0xFC0A0008) | ||
| 194 | #define MCF_CCM_CIR MCF_REG16(0xFC0A000A) | ||
| 195 | #define MCF_CCM_MISCCR MCF_REG16(0xFC0A0010) | ||
| 196 | #define MCF_CCM_CDR MCF_REG16(0xFC0A0012) | ||
| 197 | #define MCF_CCM_UHCSR MCF_REG16(0xFC0A0014) | ||
| 198 | #define MCF_CCM_UOCSR MCF_REG16(0xFC0A0016) | ||
| 199 | |||
| 200 | /* Bit definitions and macros for MCF_CCM_CCR */ | ||
| 201 | #define MCF_CCM_CCR_RESERVED (0x0001) | ||
| 202 | #define MCF_CCM_CCR_PLL_MODE (0x0003) | ||
| 203 | #define MCF_CCM_CCR_OSC_MODE (0x0005) | ||
| 204 | #define MCF_CCM_CCR_BOOTPS(x) (((x)&0x0003)<<3|0x0001) | ||
| 205 | #define MCF_CCM_CCR_LOAD (0x0021) | ||
| 206 | #define MCF_CCM_CCR_LIMP (0x0041) | ||
| 207 | #define MCF_CCM_CCR_CSC(x) (((x)&0x0003)<<8|0x0001) | ||
| 208 | |||
| 209 | /* Bit definitions and macros for MCF_CCM_RCON */ | ||
| 210 | #define MCF_CCM_RCON_RESERVED (0x0001) | ||
| 211 | #define MCF_CCM_RCON_PLL_MODE (0x0003) | ||
| 212 | #define MCF_CCM_RCON_OSC_MODE (0x0005) | ||
| 213 | #define MCF_CCM_RCON_BOOTPS(x) (((x)&0x0003)<<3|0x0001) | ||
| 214 | #define MCF_CCM_RCON_LOAD (0x0021) | ||
| 215 | #define MCF_CCM_RCON_LIMP (0x0041) | ||
| 216 | #define MCF_CCM_RCON_CSC(x) (((x)&0x0003)<<8|0x0001) | ||
| 217 | |||
| 218 | /* Bit definitions and macros for MCF_CCM_CIR */ | ||
| 219 | #define MCF_CCM_CIR_PRN(x) (((x)&0x003F)<<0) | ||
| 220 | #define MCF_CCM_CIR_PIN(x) (((x)&0x03FF)<<6) | ||
| 221 | |||
| 222 | /* Bit definitions and macros for MCF_CCM_MISCCR */ | ||
| 223 | #define MCF_CCM_MISCCR_USBSRC (0x0001) | ||
| 224 | #define MCF_CCM_MISCCR_USBDIV (0x0002) | ||
| 225 | #define MCF_CCM_MISCCR_SSI_SRC (0x0010) | ||
| 226 | #define MCF_CCM_MISCCR_TIM_DMA (0x0020) | ||
| 227 | #define MCF_CCM_MISCCR_SSI_PUS (0x0040) | ||
| 228 | #define MCF_CCM_MISCCR_SSI_PUE (0x0080) | ||
| 229 | #define MCF_CCM_MISCCR_LCD_CHEN (0x0100) | ||
| 230 | #define MCF_CCM_MISCCR_LIMP (0x1000) | ||
| 231 | #define MCF_CCM_MISCCR_PLL_LOCK (0x2000) | ||
| 232 | |||
| 233 | /* Bit definitions and macros for MCF_CCM_CDR */ | ||
| 234 | #define MCF_CCM_CDR_SSIDIV(x) (((x)&0x000F)<<0) | ||
| 235 | #define MCF_CCM_CDR_LPDIV(x) (((x)&0x000F)<<8) | ||
| 236 | |||
| 237 | /* Bit definitions and macros for MCF_CCM_UHCSR */ | ||
| 238 | #define MCF_CCM_UHCSR_XPDE (0x0001) | ||
| 239 | #define MCF_CCM_UHCSR_UHMIE (0x0002) | ||
| 240 | #define MCF_CCM_UHCSR_WKUP (0x0004) | ||
| 241 | #define MCF_CCM_UHCSR_PORTIND(x) (((x)&0x0003)<<14) | ||
| 242 | |||
| 243 | /* Bit definitions and macros for MCF_CCM_UOCSR */ | ||
| 244 | #define MCF_CCM_UOCSR_XPDE (0x0001) | ||
| 245 | #define MCF_CCM_UOCSR_UOMIE (0x0002) | ||
| 246 | #define MCF_CCM_UOCSR_WKUP (0x0004) | ||
| 247 | #define MCF_CCM_UOCSR_PWRFLT (0x0008) | ||
| 248 | #define MCF_CCM_UOCSR_SEND (0x0010) | ||
| 249 | #define MCF_CCM_UOCSR_VVLD (0x0020) | ||
| 250 | #define MCF_CCM_UOCSR_BVLD (0x0040) | ||
| 251 | #define MCF_CCM_UOCSR_AVLD (0x0080) | ||
| 252 | #define MCF_CCM_UOCSR_DPPU (0x0100) | ||
| 253 | #define MCF_CCM_UOCSR_DCR_VBUS (0x0200) | ||
| 254 | #define MCF_CCM_UOCSR_CRG_VBUS (0x0400) | ||
| 255 | #define MCF_CCM_UOCSR_DRV_VBUS (0x0800) | ||
| 256 | #define MCF_CCM_UOCSR_DMPD (0x1000) | ||
| 257 | #define MCF_CCM_UOCSR_DPPD (0x2000) | ||
| 258 | #define MCF_CCM_UOCSR_PORTIND(x) (((x)&0x0003)<<14) | ||
| 259 | |||
| 260 | /********************************************************************* | ||
| 261 | * | ||
| 262 | * DMA Timers (DTIM) | ||
| 263 | * | ||
| 264 | *********************************************************************/ | ||
| 265 | |||
| 266 | /* Register read/write macros */ | ||
| 267 | #define MCF_DTIM0_DTMR MCF_REG16(0xFC070000) | ||
| 268 | #define MCF_DTIM0_DTXMR MCF_REG08(0xFC070002) | ||
| 269 | #define MCF_DTIM0_DTER MCF_REG08(0xFC070003) | ||
| 270 | #define MCF_DTIM0_DTRR MCF_REG32(0xFC070004) | ||
| 271 | #define MCF_DTIM0_DTCR MCF_REG32(0xFC070008) | ||
| 272 | #define MCF_DTIM0_DTCN MCF_REG32(0xFC07000C) | ||
| 273 | #define MCF_DTIM1_DTMR MCF_REG16(0xFC074000) | ||
| 274 | #define MCF_DTIM1_DTXMR MCF_REG08(0xFC074002) | ||
| 275 | #define MCF_DTIM1_DTER MCF_REG08(0xFC074003) | ||
| 276 | #define MCF_DTIM1_DTRR MCF_REG32(0xFC074004) | ||
| 277 | #define MCF_DTIM1_DTCR MCF_REG32(0xFC074008) | ||
| 278 | #define MCF_DTIM1_DTCN MCF_REG32(0xFC07400C) | ||
| 279 | #define MCF_DTIM2_DTMR MCF_REG16(0xFC078000) | ||
| 280 | #define MCF_DTIM2_DTXMR MCF_REG08(0xFC078002) | ||
| 281 | #define MCF_DTIM2_DTER MCF_REG08(0xFC078003) | ||
| 282 | #define MCF_DTIM2_DTRR MCF_REG32(0xFC078004) | ||
| 283 | #define MCF_DTIM2_DTCR MCF_REG32(0xFC078008) | ||
| 284 | #define MCF_DTIM2_DTCN MCF_REG32(0xFC07800C) | ||
| 285 | #define MCF_DTIM3_DTMR MCF_REG16(0xFC07C000) | ||
| 286 | #define MCF_DTIM3_DTXMR MCF_REG08(0xFC07C002) | ||
| 287 | #define MCF_DTIM3_DTER MCF_REG08(0xFC07C003) | ||
| 288 | #define MCF_DTIM3_DTRR MCF_REG32(0xFC07C004) | ||
| 289 | #define MCF_DTIM3_DTCR MCF_REG32(0xFC07C008) | ||
| 290 | #define MCF_DTIM3_DTCN MCF_REG32(0xFC07C00C) | ||
| 291 | #define MCF_DTIM_DTMR(x) MCF_REG16(0xFC070000+((x)*0x4000)) | ||
| 292 | #define MCF_DTIM_DTXMR(x) MCF_REG08(0xFC070002+((x)*0x4000)) | ||
| 293 | #define MCF_DTIM_DTER(x) MCF_REG08(0xFC070003+((x)*0x4000)) | ||
| 294 | #define MCF_DTIM_DTRR(x) MCF_REG32(0xFC070004+((x)*0x4000)) | ||
| 295 | #define MCF_DTIM_DTCR(x) MCF_REG32(0xFC070008+((x)*0x4000)) | ||
| 296 | #define MCF_DTIM_DTCN(x) MCF_REG32(0xFC07000C+((x)*0x4000)) | ||
| 297 | |||
| 298 | /* Bit definitions and macros for MCF_DTIM_DTMR */ | ||
| 299 | #define MCF_DTIM_DTMR_RST (0x0001) | ||
| 300 | #define MCF_DTIM_DTMR_CLK(x) (((x)&0x0003)<<1) | ||
| 301 | #define MCF_DTIM_DTMR_FRR (0x0008) | ||
| 302 | #define MCF_DTIM_DTMR_ORRI (0x0010) | ||
| 303 | #define MCF_DTIM_DTMR_OM (0x0020) | ||
| 304 | #define MCF_DTIM_DTMR_CE(x) (((x)&0x0003)<<6) | ||
| 305 | #define MCF_DTIM_DTMR_PS(x) (((x)&0x00FF)<<8) | ||
| 306 | #define MCF_DTIM_DTMR_CE_ANY (0x00C0) | ||
| 307 | #define MCF_DTIM_DTMR_CE_FALL (0x0080) | ||
| 308 | #define MCF_DTIM_DTMR_CE_RISE (0x0040) | ||
| 309 | #define MCF_DTIM_DTMR_CE_NONE (0x0000) | ||
| 310 | #define MCF_DTIM_DTMR_CLK_DTIN (0x0006) | ||
| 311 | #define MCF_DTIM_DTMR_CLK_DIV16 (0x0004) | ||
| 312 | #define MCF_DTIM_DTMR_CLK_DIV1 (0x0002) | ||
| 313 | #define MCF_DTIM_DTMR_CLK_STOP (0x0000) | ||
| 314 | |||
| 315 | /* Bit definitions and macros for MCF_DTIM_DTXMR */ | ||
| 316 | #define MCF_DTIM_DTXMR_MODE16 (0x01) | ||
| 317 | #define MCF_DTIM_DTXMR_DMAEN (0x80) | ||
| 318 | |||
| 319 | /* Bit definitions and macros for MCF_DTIM_DTER */ | ||
| 320 | #define MCF_DTIM_DTER_CAP (0x01) | ||
| 321 | #define MCF_DTIM_DTER_REF (0x02) | ||
| 322 | |||
| 323 | /* Bit definitions and macros for MCF_DTIM_DTRR */ | ||
| 324 | #define MCF_DTIM_DTRR_REF(x) (((x)&0xFFFFFFFF)<<0) | ||
| 325 | |||
| 326 | /* Bit definitions and macros for MCF_DTIM_DTCR */ | ||
| 327 | #define MCF_DTIM_DTCR_CAP(x) (((x)&0xFFFFFFFF)<<0) | ||
| 328 | |||
| 329 | /* Bit definitions and macros for MCF_DTIM_DTCN */ | ||
| 330 | #define MCF_DTIM_DTCN_CNT(x) (((x)&0xFFFFFFFF)<<0) | ||
| 331 | |||
| 332 | /********************************************************************* | ||
| 333 | * | ||
| 334 | * FlexBus Chip Selects (FBCS) | ||
| 335 | * | ||
| 336 | *********************************************************************/ | ||
| 337 | |||
| 338 | /* Register read/write macros */ | ||
| 339 | #define MCF_FBCS0_CSAR MCF_REG32(0xFC008000) | ||
| 340 | #define MCF_FBCS0_CSMR MCF_REG32(0xFC008004) | ||
| 341 | #define MCF_FBCS0_CSCR MCF_REG32(0xFC008008) | ||
| 342 | #define MCF_FBCS1_CSAR MCF_REG32(0xFC00800C) | ||
| 343 | #define MCF_FBCS1_CSMR MCF_REG32(0xFC008010) | ||
| 344 | #define MCF_FBCS1_CSCR MCF_REG32(0xFC008014) | ||
| 345 | #define MCF_FBCS2_CSAR MCF_REG32(0xFC008018) | ||
| 346 | #define MCF_FBCS2_CSMR MCF_REG32(0xFC00801C) | ||
| 347 | #define MCF_FBCS2_CSCR MCF_REG32(0xFC008020) | ||
| 348 | #define MCF_FBCS3_CSAR MCF_REG32(0xFC008024) | ||
| 349 | #define MCF_FBCS3_CSMR MCF_REG32(0xFC008028) | ||
| 350 | #define MCF_FBCS3_CSCR MCF_REG32(0xFC00802C) | ||
| 351 | #define MCF_FBCS4_CSAR MCF_REG32(0xFC008030) | ||
| 352 | #define MCF_FBCS4_CSMR MCF_REG32(0xFC008034) | ||
| 353 | #define MCF_FBCS4_CSCR MCF_REG32(0xFC008038) | ||
| 354 | #define MCF_FBCS5_CSAR MCF_REG32(0xFC00803C) | ||
| 355 | #define MCF_FBCS5_CSMR MCF_REG32(0xFC008040) | ||
| 356 | #define MCF_FBCS5_CSCR MCF_REG32(0xFC008044) | ||
| 357 | #define MCF_FBCS_CSAR(x) MCF_REG32(0xFC008000+((x)*0x00C)) | ||
| 358 | #define MCF_FBCS_CSMR(x) MCF_REG32(0xFC008004+((x)*0x00C)) | ||
| 359 | #define MCF_FBCS_CSCR(x) MCF_REG32(0xFC008008+((x)*0x00C)) | ||
| 360 | |||
| 361 | /* Bit definitions and macros for MCF_FBCS_CSAR */ | ||
| 362 | #define MCF_FBCS_CSAR_BA(x) ((x)&0xFFFF0000) | ||
| 363 | |||
| 364 | /* Bit definitions and macros for MCF_FBCS_CSMR */ | ||
| 365 | #define MCF_FBCS_CSMR_V (0x00000001) | ||
| 366 | #define MCF_FBCS_CSMR_WP (0x00000100) | ||
| 367 | #define MCF_FBCS_CSMR_BAM(x) (((x)&0x0000FFFF)<<16) | ||
| 368 | #define MCF_FBCS_CSMR_BAM_4G (0xFFFF0000) | ||
| 369 | #define MCF_FBCS_CSMR_BAM_2G (0x7FFF0000) | ||
| 370 | #define MCF_FBCS_CSMR_BAM_1G (0x3FFF0000) | ||
| 371 | #define MCF_FBCS_CSMR_BAM_1024M (0x3FFF0000) | ||
| 372 | #define MCF_FBCS_CSMR_BAM_512M (0x1FFF0000) | ||
| 373 | #define MCF_FBCS_CSMR_BAM_256M (0x0FFF0000) | ||
| 374 | #define MCF_FBCS_CSMR_BAM_128M (0x07FF0000) | ||
| 375 | #define MCF_FBCS_CSMR_BAM_64M (0x03FF0000) | ||
| 376 | #define MCF_FBCS_CSMR_BAM_32M (0x01FF0000) | ||
| 377 | #define MCF_FBCS_CSMR_BAM_16M (0x00FF0000) | ||
| 378 | #define MCF_FBCS_CSMR_BAM_8M (0x007F0000) | ||
| 379 | #define MCF_FBCS_CSMR_BAM_4M (0x003F0000) | ||
| 380 | #define MCF_FBCS_CSMR_BAM_2M (0x001F0000) | ||
| 381 | #define MCF_FBCS_CSMR_BAM_1M (0x000F0000) | ||
| 382 | #define MCF_FBCS_CSMR_BAM_1024K (0x000F0000) | ||
| 383 | #define MCF_FBCS_CSMR_BAM_512K (0x00070000) | ||
| 384 | #define MCF_FBCS_CSMR_BAM_256K (0x00030000) | ||
| 385 | #define MCF_FBCS_CSMR_BAM_128K (0x00010000) | ||
| 386 | #define MCF_FBCS_CSMR_BAM_64K (0x00000000) | ||
| 387 | |||
| 388 | /* Bit definitions and macros for MCF_FBCS_CSCR */ | ||
| 389 | #define MCF_FBCS_CSCR_BSTW (0x00000008) | ||
| 390 | #define MCF_FBCS_CSCR_BSTR (0x00000010) | ||
| 391 | #define MCF_FBCS_CSCR_BEM (0x00000020) | ||
| 392 | #define MCF_FBCS_CSCR_PS(x) (((x)&0x00000003)<<6) | ||
| 393 | #define MCF_FBCS_CSCR_AA (0x00000100) | ||
| 394 | #define MCF_FBCS_CSCR_SBM (0x00000200) | ||
| 395 | #define MCF_FBCS_CSCR_WS(x) (((x)&0x0000003F)<<10) | ||
| 396 | #define MCF_FBCS_CSCR_WRAH(x) (((x)&0x00000003)<<16) | ||
| 397 | #define MCF_FBCS_CSCR_RDAH(x) (((x)&0x00000003)<<18) | ||
| 398 | #define MCF_FBCS_CSCR_ASET(x) (((x)&0x00000003)<<20) | ||
| 399 | #define MCF_FBCS_CSCR_SWSEN (0x00800000) | ||
| 400 | #define MCF_FBCS_CSCR_SWS(x) (((x)&0x0000003F)<<26) | ||
| 401 | #define MCF_FBCS_CSCR_PS_8 (0x0040) | ||
| 402 | #define MCF_FBCS_CSCR_PS_16 (0x0080) | ||
| 403 | #define MCF_FBCS_CSCR_PS_32 (0x0000) | ||
| 404 | |||
| 405 | /********************************************************************* | ||
| 406 | * | ||
| 407 | * General Purpose I/O (GPIO) | ||
| 408 | * | ||
| 409 | *********************************************************************/ | ||
| 410 | |||
| 411 | /* Register read/write macros */ | ||
| 412 | #define MCF_GPIO_PODR_FECH MCF_REG08(0xFC0A4000) | ||
| 413 | #define MCF_GPIO_PODR_FECL MCF_REG08(0xFC0A4001) | ||
| 414 | #define MCF_GPIO_PODR_SSI MCF_REG08(0xFC0A4002) | ||
| 415 | #define MCF_GPIO_PODR_BUSCTL MCF_REG08(0xFC0A4003) | ||
| 416 | #define MCF_GPIO_PODR_BE MCF_REG08(0xFC0A4004) | ||
| 417 | #define MCF_GPIO_PODR_CS MCF_REG08(0xFC0A4005) | ||
| 418 | #define MCF_GPIO_PODR_PWM MCF_REG08(0xFC0A4006) | ||
| 419 | #define MCF_GPIO_PODR_FECI2C MCF_REG08(0xFC0A4007) | ||
| 420 | #define MCF_GPIO_PODR_UART MCF_REG08(0xFC0A4009) | ||
| 421 | #define MCF_GPIO_PODR_QSPI MCF_REG08(0xFC0A400A) | ||
| 422 | #define MCF_GPIO_PODR_TIMER MCF_REG08(0xFC0A400B) | ||
| 423 | #define MCF_GPIO_PODR_LCDDATAH MCF_REG08(0xFC0A400D) | ||
| 424 | #define MCF_GPIO_PODR_LCDDATAM MCF_REG08(0xFC0A400E) | ||
| 425 | #define MCF_GPIO_PODR_LCDDATAL MCF_REG08(0xFC0A400F) | ||
| 426 | #define MCF_GPIO_PODR_LCDCTLH MCF_REG08(0xFC0A4010) | ||
| 427 | #define MCF_GPIO_PODR_LCDCTLL MCF_REG08(0xFC0A4011) | ||
| 428 | #define MCF_GPIO_PDDR_FECH MCF_REG08(0xFC0A4014) | ||
| 429 | #define MCF_GPIO_PDDR_FECL MCF_REG08(0xFC0A4015) | ||
| 430 | #define MCF_GPIO_PDDR_SSI MCF_REG08(0xFC0A4016) | ||
| 431 | #define MCF_GPIO_PDDR_BUSCTL MCF_REG08(0xFC0A4017) | ||
| 432 | #define MCF_GPIO_PDDR_BE MCF_REG08(0xFC0A4018) | ||
| 433 | #define MCF_GPIO_PDDR_CS MCF_REG08(0xFC0A4019) | ||
| 434 | #define MCF_GPIO_PDDR_PWM MCF_REG08(0xFC0A401A) | ||
| 435 | #define MCF_GPIO_PDDR_FECI2C MCF_REG08(0xFC0A401B) | ||
| 436 | #define MCF_GPIO_PDDR_UART MCF_REG08(0xFC0A401C) | ||
| 437 | #define MCF_GPIO_PDDR_QSPI MCF_REG08(0xFC0A401E) | ||
| 438 | #define MCF_GPIO_PDDR_TIMER MCF_REG08(0xFC0A401F) | ||
| 439 | #define MCF_GPIO_PDDR_LCDDATAH MCF_REG08(0xFC0A4021) | ||
| 440 | #define MCF_GPIO_PDDR_LCDDATAM MCF_REG08(0xFC0A4022) | ||
| 441 | #define MCF_GPIO_PDDR_LCDDATAL MCF_REG08(0xFC0A4023) | ||
| 442 | #define MCF_GPIO_PDDR_LCDCTLH MCF_REG08(0xFC0A4024) | ||
| 443 | #define MCF_GPIO_PDDR_LCDCTLL MCF_REG08(0xFC0A4025) | ||
| 444 | #define MCF_GPIO_PPDSDR_FECH MCF_REG08(0xFC0A4028) | ||
| 445 | #define MCF_GPIO_PPDSDR_FECL MCF_REG08(0xFC0A4029) | ||
| 446 | #define MCF_GPIO_PPDSDR_SSI MCF_REG08(0xFC0A402A) | ||
| 447 | #define MCF_GPIO_PPDSDR_BUSCTL MCF_REG08(0xFC0A402B) | ||
| 448 | #define MCF_GPIO_PPDSDR_BE MCF_REG08(0xFC0A402C) | ||
| 449 | #define MCF_GPIO_PPDSDR_CS MCF_REG08(0xFC0A402D) | ||
| 450 | #define MCF_GPIO_PPDSDR_PWM MCF_REG08(0xFC0A402E) | ||
| 451 | #define MCF_GPIO_PPDSDR_FECI2C MCF_REG08(0xFC0A402F) | ||
| 452 | #define MCF_GPIO_PPDSDR_UART MCF_REG08(0xFC0A4031) | ||
| 453 | #define MCF_GPIO_PPDSDR_QSPI MCF_REG08(0xFC0A4032) | ||
| 454 | #define MCF_GPIO_PPDSDR_TIMER MCF_REG08(0xFC0A4033) | ||
| 455 | #define MCF_GPIO_PPDSDR_LCDDATAH MCF_REG08(0xFC0A4035) | ||
| 456 | #define MCF_GPIO_PPDSDR_LCDDATAM MCF_REG08(0xFC0A4036) | ||
| 457 | #define MCF_GPIO_PPDSDR_LCDDATAL MCF_REG08(0xFC0A4037) | ||
| 458 | #define MCF_GPIO_PPDSDR_LCDCTLH MCF_REG08(0xFC0A4038) | ||
| 459 | #define MCF_GPIO_PPDSDR_LCDCTLL MCF_REG08(0xFC0A4039) | ||
| 460 | #define MCF_GPIO_PCLRR_FECH MCF_REG08(0xFC0A403C) | ||
| 461 | #define MCF_GPIO_PCLRR_FECL MCF_REG08(0xFC0A403D) | ||
| 462 | #define MCF_GPIO_PCLRR_SSI MCF_REG08(0xFC0A403E) | ||
| 463 | #define MCF_GPIO_PCLRR_BUSCTL MCF_REG08(0xFC0A403F) | ||
| 464 | #define MCF_GPIO_PCLRR_BE MCF_REG08(0xFC0A4040) | ||
| 465 | #define MCF_GPIO_PCLRR_CS MCF_REG08(0xFC0A4041) | ||
| 466 | #define MCF_GPIO_PCLRR_PWM MCF_REG08(0xFC0A4042) | ||
| 467 | #define MCF_GPIO_PCLRR_FECI2C MCF_REG08(0xFC0A4043) | ||
| 468 | #define MCF_GPIO_PCLRR_UART MCF_REG08(0xFC0A4045) | ||
| 469 | #define MCF_GPIO_PCLRR_QSPI MCF_REG08(0xFC0A4046) | ||
| 470 | #define MCF_GPIO_PCLRR_TIMER MCF_REG08(0xFC0A4047) | ||
| 471 | #define MCF_GPIO_PCLRR_LCDDATAH MCF_REG08(0xFC0A4049) | ||
| 472 | #define MCF_GPIO_PCLRR_LCDDATAM MCF_REG08(0xFC0A404A) | ||
| 473 | #define MCF_GPIO_PCLRR_LCDDATAL MCF_REG08(0xFC0A404B) | ||
| 474 | #define MCF_GPIO_PCLRR_LCDCTLH MCF_REG08(0xFC0A404C) | ||
| 475 | #define MCF_GPIO_PCLRR_LCDCTLL MCF_REG08(0xFC0A404D) | ||
| 476 | #define MCF_GPIO_PAR_FEC MCF_REG08(0xFC0A4050) | ||
| 477 | #define MCF_GPIO_PAR_PWM MCF_REG08(0xFC0A4051) | ||
| 478 | #define MCF_GPIO_PAR_BUSCTL MCF_REG08(0xFC0A4052) | ||
| 479 | #define MCF_GPIO_PAR_FECI2C MCF_REG08(0xFC0A4053) | ||
| 480 | #define MCF_GPIO_PAR_BE MCF_REG08(0xFC0A4054) | ||
| 481 | #define MCF_GPIO_PAR_CS MCF_REG08(0xFC0A4055) | ||
| 482 | #define MCF_GPIO_PAR_SSI MCF_REG16(0xFC0A4056) | ||
| 483 | #define MCF_GPIO_PAR_UART MCF_REG16(0xFC0A4058) | ||
| 484 | #define MCF_GPIO_PAR_QSPI MCF_REG16(0xFC0A405A) | ||
| 485 | #define MCF_GPIO_PAR_TIMER MCF_REG08(0xFC0A405C) | ||
| 486 | #define MCF_GPIO_PAR_LCDDATA MCF_REG08(0xFC0A405D) | ||
| 487 | #define MCF_GPIO_PAR_LCDCTL MCF_REG16(0xFC0A405E) | ||
| 488 | #define MCF_GPIO_PAR_IRQ MCF_REG16(0xFC0A4060) | ||
| 489 | #define MCF_GPIO_MSCR_FLEXBUS MCF_REG08(0xFC0A4064) | ||
| 490 | #define MCF_GPIO_MSCR_SDRAM MCF_REG08(0xFC0A4065) | ||
| 491 | #define MCF_GPIO_DSCR_I2C MCF_REG08(0xFC0A4068) | ||
| 492 | #define MCF_GPIO_DSCR_PWM MCF_REG08(0xFC0A4069) | ||
| 493 | #define MCF_GPIO_DSCR_FEC MCF_REG08(0xFC0A406A) | ||
| 494 | #define MCF_GPIO_DSCR_UART MCF_REG08(0xFC0A406B) | ||
| 495 | #define MCF_GPIO_DSCR_QSPI MCF_REG08(0xFC0A406C) | ||
| 496 | #define MCF_GPIO_DSCR_TIMER MCF_REG08(0xFC0A406D) | ||
| 497 | #define MCF_GPIO_DSCR_SSI MCF_REG08(0xFC0A406E) | ||
| 498 | #define MCF_GPIO_DSCR_LCD MCF_REG08(0xFC0A406F) | ||
| 499 | #define MCF_GPIO_DSCR_DEBUG MCF_REG08(0xFC0A4070) | ||
| 500 | #define MCF_GPIO_DSCR_CLKRST MCF_REG08(0xFC0A4071) | ||
| 501 | #define MCF_GPIO_DSCR_IRQ MCF_REG08(0xFC0A4072) | ||
| 502 | |||
| 503 | /* Bit definitions and macros for MCF_GPIO_PODR_FECH */ | ||
| 504 | #define MCF_GPIO_PODR_FECH_PODR_FECH0 (0x01) | ||
| 505 | #define MCF_GPIO_PODR_FECH_PODR_FECH1 (0x02) | ||
| 506 | #define MCF_GPIO_PODR_FECH_PODR_FECH2 (0x04) | ||
| 507 | #define MCF_GPIO_PODR_FECH_PODR_FECH3 (0x08) | ||
| 508 | #define MCF_GPIO_PODR_FECH_PODR_FECH4 (0x10) | ||
| 509 | #define MCF_GPIO_PODR_FECH_PODR_FECH5 (0x20) | ||
| 510 | #define MCF_GPIO_PODR_FECH_PODR_FECH6 (0x40) | ||
| 511 | #define MCF_GPIO_PODR_FECH_PODR_FECH7 (0x80) | ||
| 512 | |||
| 513 | /* Bit definitions and macros for MCF_GPIO_PODR_FECL */ | ||
| 514 | #define MCF_GPIO_PODR_FECL_PODR_FECL0 (0x01) | ||
| 515 | #define MCF_GPIO_PODR_FECL_PODR_FECL1 (0x02) | ||
| 516 | #define MCF_GPIO_PODR_FECL_PODR_FECL2 (0x04) | ||
| 517 | #define MCF_GPIO_PODR_FECL_PODR_FECL3 (0x08) | ||
| 518 | #define MCF_GPIO_PODR_FECL_PODR_FECL4 (0x10) | ||
| 519 | #define MCF_GPIO_PODR_FECL_PODR_FECL5 (0x20) | ||
| 520 | #define MCF_GPIO_PODR_FECL_PODR_FECL6 (0x40) | ||
| 521 | #define MCF_GPIO_PODR_FECL_PODR_FECL7 (0x80) | ||
| 522 | |||
| 523 | /* Bit definitions and macros for MCF_GPIO_PODR_SSI */ | ||
| 524 | #define MCF_GPIO_PODR_SSI_PODR_SSI0 (0x01) | ||
| 525 | #define MCF_GPIO_PODR_SSI_PODR_SSI1 (0x02) | ||
| 526 | #define MCF_GPIO_PODR_SSI_PODR_SSI2 (0x04) | ||
| 527 | #define MCF_GPIO_PODR_SSI_PODR_SSI3 (0x08) | ||
| 528 | #define MCF_GPIO_PODR_SSI_PODR_SSI4 (0x10) | ||
| 529 | |||
| 530 | /* Bit definitions and macros for MCF_GPIO_PODR_BUSCTL */ | ||
| 531 | #define MCF_GPIO_PODR_BUSCTL_POSDR_BUSCTL0 (0x01) | ||
| 532 | #define MCF_GPIO_PODR_BUSCTL_PODR_BUSCTL1 (0x02) | ||
| 533 | #define MCF_GPIO_PODR_BUSCTL_PODR_BUSCTL2 (0x04) | ||
| 534 | #define MCF_GPIO_PODR_BUSCTL_PODR_BUSCTL3 (0x08) | ||
| 535 | |||
| 536 | /* Bit definitions and macros for MCF_GPIO_PODR_BE */ | ||
| 537 | #define MCF_GPIO_PODR_BE_PODR_BE0 (0x01) | ||
| 538 | #define MCF_GPIO_PODR_BE_PODR_BE1 (0x02) | ||
| 539 | #define MCF_GPIO_PODR_BE_PODR_BE2 (0x04) | ||
| 540 | #define MCF_GPIO_PODR_BE_PODR_BE3 (0x08) | ||
| 541 | |||
| 542 | /* Bit definitions and macros for MCF_GPIO_PODR_CS */ | ||
| 543 | #define MCF_GPIO_PODR_CS_PODR_CS1 (0x02) | ||
| 544 | #define MCF_GPIO_PODR_CS_PODR_CS2 (0x04) | ||
| 545 | #define MCF_GPIO_PODR_CS_PODR_CS3 (0x08) | ||
| 546 | #define MCF_GPIO_PODR_CS_PODR_CS4 (0x10) | ||
| 547 | #define MCF_GPIO_PODR_CS_PODR_CS5 (0x20) | ||
| 548 | |||
| 549 | /* Bit definitions and macros for MCF_GPIO_PODR_PWM */ | ||
| 550 | #define MCF_GPIO_PODR_PWM_PODR_PWM2 (0x04) | ||
| 551 | #define MCF_GPIO_PODR_PWM_PODR_PWM3 (0x08) | ||
| 552 | #define MCF_GPIO_PODR_PWM_PODR_PWM4 (0x10) | ||
| 553 | #define MCF_GPIO_PODR_PWM_PODR_PWM5 (0x20) | ||
| 554 | |||
| 555 | /* Bit definitions and macros for MCF_GPIO_PODR_FECI2C */ | ||
| 556 | #define MCF_GPIO_PODR_FECI2C_PODR_FECI2C0 (0x01) | ||
| 557 | #define MCF_GPIO_PODR_FECI2C_PODR_FECI2C1 (0x02) | ||
| 558 | #define MCF_GPIO_PODR_FECI2C_PODR_FECI2C2 (0x04) | ||
| 559 | #define MCF_GPIO_PODR_FECI2C_PODR_FECI2C3 (0x08) | ||
| 560 | |||
| 561 | /* Bit definitions and macros for MCF_GPIO_PODR_UART */ | ||
| 562 | #define MCF_GPIO_PODR_UART_PODR_UART0 (0x01) | ||
| 563 | #define MCF_GPIO_PODR_UART_PODR_UART1 (0x02) | ||
| 564 | #define MCF_GPIO_PODR_UART_PODR_UART2 (0x04) | ||
| 565 | #define MCF_GPIO_PODR_UART_PODR_UART3 (0x08) | ||
| 566 | #define MCF_GPIO_PODR_UART_PODR_UART4 (0x10) | ||
| 567 | #define MCF_GPIO_PODR_UART_PODR_UART5 (0x20) | ||
| 568 | #define MCF_GPIO_PODR_UART_PODR_UART6 (0x40) | ||
| 569 | #define MCF_GPIO_PODR_UART_PODR_UART7 (0x80) | ||
| 570 | |||
| 571 | /* Bit definitions and macros for MCF_GPIO_PODR_QSPI */ | ||
| 572 | #define MCF_GPIO_PODR_QSPI_PODR_QSPI0 (0x01) | ||
| 573 | #define MCF_GPIO_PODR_QSPI_PODR_QSPI1 (0x02) | ||
| 574 | #define MCF_GPIO_PODR_QSPI_PODR_QSPI2 (0x04) | ||
| 575 | #define MCF_GPIO_PODR_QSPI_PODR_QSPI3 (0x08) | ||
| 576 | #define MCF_GPIO_PODR_QSPI_PODR_QSPI4 (0x10) | ||
| 577 | #define MCF_GPIO_PODR_QSPI_PODR_QSPI5 (0x20) | ||
| 578 | |||
| 579 | /* Bit definitions and macros for MCF_GPIO_PODR_TIMER */ | ||
| 580 | #define MCF_GPIO_PODR_TIMER_PODR_TIMER0 (0x01) | ||
| 581 | #define MCF_GPIO_PODR_TIMER_PODR_TIMER1 (0x02) | ||
| 582 | #define MCF_GPIO_PODR_TIMER_PODR_TIMER2 (0x04) | ||
| 583 | #define MCF_GPIO_PODR_TIMER_PODR_TIMER3 (0x08) | ||
| 584 | |||
| 585 | /* Bit definitions and macros for MCF_GPIO_PODR_LCDDATAH */ | ||
| 586 | #define MCF_GPIO_PODR_LCDDATAH_PODR_LCDDATAH0 (0x01) | ||
| 587 | #define MCF_GPIO_PODR_LCDDATAH_PODR_LCDDATAH1 (0x02) | ||
| 588 | |||
| 589 | /* Bit definitions and macros for MCF_GPIO_PODR_LCDDATAM */ | ||
| 590 | #define MCF_GPIO_PODR_LCDDATAM_PODR_LCDDATAM0 (0x01) | ||
| 591 | #define MCF_GPIO_PODR_LCDDATAM_PODR_LCDDATAM1 (0x02) | ||
| 592 | #define MCF_GPIO_PODR_LCDDATAM_PODR_LCDDATAM2 (0x04) | ||
| 593 | #define MCF_GPIO_PODR_LCDDATAM_PODR_LCDDATAM3 (0x08) | ||
| 594 | #define MCF_GPIO_PODR_LCDDATAM_PODR_LCDDATAM4 (0x10) | ||
| 595 | #define MCF_GPIO_PODR_LCDDATAM_PODR_LCDDATAM5 (0x20) | ||
| 596 | #define MCF_GPIO_PODR_LCDDATAM_PODR_LCDDATAM6 (0x40) | ||
| 597 | #define MCF_GPIO_PODR_LCDDATAM_PODR_LCDDATAM7 (0x80) | ||
| 598 | |||
| 599 | /* Bit definitions and macros for MCF_GPIO_PODR_LCDDATAL */ | ||
| 600 | #define MCF_GPIO_PODR_LCDDATAL_PODR_LCDDATAL0 (0x01) | ||
| 601 | #define MCF_GPIO_PODR_LCDDATAL_PODR_LCDDATAL1 (0x02) | ||
| 602 | #define MCF_GPIO_PODR_LCDDATAL_PODR_LCDDATAL2 (0x04) | ||
| 603 | #define MCF_GPIO_PODR_LCDDATAL_PODR_LCDDATAL3 (0x08) | ||
| 604 | #define MCF_GPIO_PODR_LCDDATAL_PODR_LCDDATAL4 (0x10) | ||
| 605 | #define MCF_GPIO_PODR_LCDDATAL_PODR_LCDDATAL5 (0x20) | ||
| 606 | #define MCF_GPIO_PODR_LCDDATAL_PODR_LCDDATAL6 (0x40) | ||
| 607 | #define MCF_GPIO_PODR_LCDDATAL_PODR_LCDDATAL7 (0x80) | ||
| 608 | |||
| 609 | /* Bit definitions and macros for MCF_GPIO_PODR_LCDCTLH */ | ||
| 610 | #define MCF_GPIO_PODR_LCDCTLH_PODR_LCDCTLH0 (0x01) | ||
| 611 | |||
| 612 | /* Bit definitions and macros for MCF_GPIO_PODR_LCDCTLL */ | ||
| 613 | #define MCF_GPIO_PODR_LCDCTLL_PODR_LCDCTLL0 (0x01) | ||
| 614 | #define MCF_GPIO_PODR_LCDCTLL_PODR_LCDCTLL1 (0x02) | ||
| 615 | #define MCF_GPIO_PODR_LCDCTLL_PODR_LCDCTLL2 (0x04) | ||
| 616 | #define MCF_GPIO_PODR_LCDCTLL_PODR_LCDCTLL3 (0x08) | ||
| 617 | #define MCF_GPIO_PODR_LCDCTLL_PODR_LCDCTLL4 (0x10) | ||
| 618 | #define MCF_GPIO_PODR_LCDCTLL_PODR_LCDCTLL5 (0x20) | ||
| 619 | #define MCF_GPIO_PODR_LCDCTLL_PODR_LCDCTLL6 (0x40) | ||
| 620 | #define MCF_GPIO_PODR_LCDCTLL_PODR_LCDCTLL7 (0x80) | ||
| 621 | |||
| 622 | /* Bit definitions and macros for MCF_GPIO_PDDR_FECH */ | ||
| 623 | #define MCF_GPIO_PDDR_FECH_PDDR_FECH0 (0x01) | ||
| 624 | #define MCF_GPIO_PDDR_FECH_PDDR_FECH1 (0x02) | ||
| 625 | #define MCF_GPIO_PDDR_FECH_PDDR_FECH2 (0x04) | ||
| 626 | #define MCF_GPIO_PDDR_FECH_PDDR_FECH3 (0x08) | ||
| 627 | #define MCF_GPIO_PDDR_FECH_PDDR_FECH4 (0x10) | ||
| 628 | #define MCF_GPIO_PDDR_FECH_PDDR_FECH5 (0x20) | ||
| 629 | #define MCF_GPIO_PDDR_FECH_PDDR_FECH6 (0x40) | ||
| 630 | #define MCF_GPIO_PDDR_FECH_PDDR_FECH7 (0x80) | ||
| 631 | |||
| 632 | /* Bit definitions and macros for MCF_GPIO_PDDR_FECL */ | ||
| 633 | #define MCF_GPIO_PDDR_FECL_PDDR_FECL0 (0x01) | ||
| 634 | #define MCF_GPIO_PDDR_FECL_PDDR_FECL1 (0x02) | ||
| 635 | #define MCF_GPIO_PDDR_FECL_PDDR_FECL2 (0x04) | ||
| 636 | #define MCF_GPIO_PDDR_FECL_PDDR_FECL3 (0x08) | ||
| 637 | #define MCF_GPIO_PDDR_FECL_PDDR_FECL4 (0x10) | ||
| 638 | #define MCF_GPIO_PDDR_FECL_PDDR_FECL5 (0x20) | ||
| 639 | #define MCF_GPIO_PDDR_FECL_PDDR_FECL6 (0x40) | ||
| 640 | #define MCF_GPIO_PDDR_FECL_PDDR_FECL7 (0x80) | ||
| 641 | |||
| 642 | /* Bit definitions and macros for MCF_GPIO_PDDR_SSI */ | ||
| 643 | #define MCF_GPIO_PDDR_SSI_PDDR_SSI0 (0x01) | ||
| 644 | #define MCF_GPIO_PDDR_SSI_PDDR_SSI1 (0x02) | ||
| 645 | #define MCF_GPIO_PDDR_SSI_PDDR_SSI2 (0x04) | ||
| 646 | #define MCF_GPIO_PDDR_SSI_PDDR_SSI3 (0x08) | ||
| 647 | #define MCF_GPIO_PDDR_SSI_PDDR_SSI4 (0x10) | ||
| 648 | |||
| 649 | /* Bit definitions and macros for MCF_GPIO_PDDR_BUSCTL */ | ||
| 650 | #define MCF_GPIO_PDDR_BUSCTL_POSDR_BUSCTL0 (0x01) | ||
| 651 | #define MCF_GPIO_PDDR_BUSCTL_PDDR_BUSCTL1 (0x02) | ||
| 652 | #define MCF_GPIO_PDDR_BUSCTL_PDDR_BUSCTL2 (0x04) | ||
| 653 | #define MCF_GPIO_PDDR_BUSCTL_PDDR_BUSCTL3 (0x08) | ||
| 654 | |||
| 655 | /* Bit definitions and macros for MCF_GPIO_PDDR_BE */ | ||
| 656 | #define MCF_GPIO_PDDR_BE_PDDR_BE0 (0x01) | ||
| 657 | #define MCF_GPIO_PDDR_BE_PDDR_BE1 (0x02) | ||
| 658 | #define MCF_GPIO_PDDR_BE_PDDR_BE2 (0x04) | ||
| 659 | #define MCF_GPIO_PDDR_BE_PDDR_BE3 (0x08) | ||
| 660 | |||
| 661 | /* Bit definitions and macros for MCF_GPIO_PDDR_CS */ | ||
| 662 | #define MCF_GPIO_PDDR_CS_PDDR_CS1 (0x02) | ||
| 663 | #define MCF_GPIO_PDDR_CS_PDDR_CS2 (0x04) | ||
| 664 | #define MCF_GPIO_PDDR_CS_PDDR_CS3 (0x08) | ||
| 665 | #define MCF_GPIO_PDDR_CS_PDDR_CS4 (0x10) | ||
| 666 | #define MCF_GPIO_PDDR_CS_PDDR_CS5 (0x20) | ||
| 667 | |||
| 668 | /* Bit definitions and macros for MCF_GPIO_PDDR_PWM */ | ||
| 669 | #define MCF_GPIO_PDDR_PWM_PDDR_PWM2 (0x04) | ||
| 670 | #define MCF_GPIO_PDDR_PWM_PDDR_PWM3 (0x08) | ||
| 671 | #define MCF_GPIO_PDDR_PWM_PDDR_PWM4 (0x10) | ||
| 672 | #define MCF_GPIO_PDDR_PWM_PDDR_PWM5 (0x20) | ||
| 673 | |||
| 674 | /* Bit definitions and macros for MCF_GPIO_PDDR_FECI2C */ | ||
| 675 | #define MCF_GPIO_PDDR_FECI2C_PDDR_FECI2C0 (0x01) | ||
| 676 | #define MCF_GPIO_PDDR_FECI2C_PDDR_FECI2C1 (0x02) | ||
| 677 | #define MCF_GPIO_PDDR_FECI2C_PDDR_FECI2C2 (0x04) | ||
| 678 | #define MCF_GPIO_PDDR_FECI2C_PDDR_FECI2C3 (0x08) | ||
| 679 | |||
| 680 | /* Bit definitions and macros for MCF_GPIO_PDDR_UART */ | ||
| 681 | #define MCF_GPIO_PDDR_UART_PDDR_UART0 (0x01) | ||
| 682 | #define MCF_GPIO_PDDR_UART_PDDR_UART1 (0x02) | ||
| 683 | #define MCF_GPIO_PDDR_UART_PDDR_UART2 (0x04) | ||
| 684 | #define MCF_GPIO_PDDR_UART_PDDR_UART3 (0x08) | ||
| 685 | #define MCF_GPIO_PDDR_UART_PDDR_UART4 (0x10) | ||
| 686 | #define MCF_GPIO_PDDR_UART_PDDR_UART5 (0x20) | ||
| 687 | #define MCF_GPIO_PDDR_UART_PDDR_UART6 (0x40) | ||
| 688 | #define MCF_GPIO_PDDR_UART_PDDR_UART7 (0x80) | ||
| 689 | |||
| 690 | /* Bit definitions and macros for MCF_GPIO_PDDR_QSPI */ | ||
| 691 | #define MCF_GPIO_PDDR_QSPI_PDDR_QSPI0 (0x01) | ||
| 692 | #define MCF_GPIO_PDDR_QSPI_PDDR_QSPI1 (0x02) | ||
| 693 | #define MCF_GPIO_PDDR_QSPI_PDDR_QSPI2 (0x04) | ||
| 694 | #define MCF_GPIO_PDDR_QSPI_PDDR_QSPI3 (0x08) | ||
| 695 | #define MCF_GPIO_PDDR_QSPI_PDDR_QSPI4 (0x10) | ||
| 696 | #define MCF_GPIO_PDDR_QSPI_PDDR_QSPI5 (0x20) | ||
| 697 | |||
| 698 | /* Bit definitions and macros for MCF_GPIO_PDDR_TIMER */ | ||
| 699 | #define MCF_GPIO_PDDR_TIMER_PDDR_TIMER0 (0x01) | ||
| 700 | #define MCF_GPIO_PDDR_TIMER_PDDR_TIMER1 (0x02) | ||
| 701 | #define MCF_GPIO_PDDR_TIMER_PDDR_TIMER2 (0x04) | ||
| 702 | #define MCF_GPIO_PDDR_TIMER_PDDR_TIMER3 (0x08) | ||
| 703 | |||
| 704 | /* Bit definitions and macros for MCF_GPIO_PDDR_LCDDATAH */ | ||
| 705 | #define MCF_GPIO_PDDR_LCDDATAH_PDDR_LCDDATAH0 (0x01) | ||
| 706 | #define MCF_GPIO_PDDR_LCDDATAH_PDDR_LCDDATAH1 (0x02) | ||
| 707 | |||
| 708 | /* Bit definitions and macros for MCF_GPIO_PDDR_LCDDATAM */ | ||
| 709 | #define MCF_GPIO_PDDR_LCDDATAM_PDDR_LCDDATAM0 (0x01) | ||
| 710 | #define MCF_GPIO_PDDR_LCDDATAM_PDDR_LCDDATAM1 (0x02) | ||
| 711 | #define MCF_GPIO_PDDR_LCDDATAM_PDDR_LCDDATAM2 (0x04) | ||
| 712 | #define MCF_GPIO_PDDR_LCDDATAM_PDDR_LCDDATAM3 (0x08) | ||
| 713 | #define MCF_GPIO_PDDR_LCDDATAM_PDDR_LCDDATAM4 (0x10) | ||
| 714 | #define MCF_GPIO_PDDR_LCDDATAM_PDDR_LCDDATAM5 (0x20) | ||
| 715 | #define MCF_GPIO_PDDR_LCDDATAM_PDDR_LCDDATAM6 (0x40) | ||
| 716 | #define MCF_GPIO_PDDR_LCDDATAM_PDDR_LCDDATAM7 (0x80) | ||
| 717 | |||
| 718 | /* Bit definitions and macros for MCF_GPIO_PDDR_LCDDATAL */ | ||
| 719 | #define MCF_GPIO_PDDR_LCDDATAL_PDDR_LCDDATAL0 (0x01) | ||
| 720 | #define MCF_GPIO_PDDR_LCDDATAL_PDDR_LCDDATAL1 (0x02) | ||
| 721 | #define MCF_GPIO_PDDR_LCDDATAL_PDDR_LCDDATAL2 (0x04) | ||
| 722 | #define MCF_GPIO_PDDR_LCDDATAL_PDDR_LCDDATAL3 (0x08) | ||
| 723 | #define MCF_GPIO_PDDR_LCDDATAL_PDDR_LCDDATAL4 (0x10) | ||
| 724 | #define MCF_GPIO_PDDR_LCDDATAL_PDDR_LCDDATAL5 (0x20) | ||
| 725 | #define MCF_GPIO_PDDR_LCDDATAL_PDDR_LCDDATAL6 (0x40) | ||
| 726 | #define MCF_GPIO_PDDR_LCDDATAL_PDDR_LCDDATAL7 (0x80) | ||
| 727 | |||
| 728 | /* Bit definitions and macros for MCF_GPIO_PDDR_LCDCTLH */ | ||
| 729 | #define MCF_GPIO_PDDR_LCDCTLH_PDDR_LCDCTLH0 (0x01) | ||
| 730 | |||
| 731 | /* Bit definitions and macros for MCF_GPIO_PDDR_LCDCTLL */ | ||
| 732 | #define MCF_GPIO_PDDR_LCDCTLL_PDDR_LCDCTLL0 (0x01) | ||
| 733 | #define MCF_GPIO_PDDR_LCDCTLL_PDDR_LCDCTLL1 (0x02) | ||
| 734 | #define MCF_GPIO_PDDR_LCDCTLL_PDDR_LCDCTLL2 (0x04) | ||
| 735 | #define MCF_GPIO_PDDR_LCDCTLL_PDDR_LCDCTLL3 (0x08) | ||
| 736 | #define MCF_GPIO_PDDR_LCDCTLL_PDDR_LCDCTLL4 (0x10) | ||
| 737 | #define MCF_GPIO_PDDR_LCDCTLL_PDDR_LCDCTLL5 (0x20) | ||
| 738 | #define MCF_GPIO_PDDR_LCDCTLL_PDDR_LCDCTLL6 (0x40) | ||
| 739 | #define MCF_GPIO_PDDR_LCDCTLL_PDDR_LCDCTLL7 (0x80) | ||
| 740 | |||
| 741 | /* Bit definitions and macros for MCF_GPIO_PPDSDR_FECH */ | ||
| 742 | #define MCF_GPIO_PPDSDR_FECH_PPDSDR_FECH0 (0x01) | ||
| 743 | #define MCF_GPIO_PPDSDR_FECH_PPDSDR_FECH1 (0x02) | ||
| 744 | #define MCF_GPIO_PPDSDR_FECH_PPDSDR_FECH2 (0x04) | ||
| 745 | #define MCF_GPIO_PPDSDR_FECH_PPDSDR_FECH3 (0x08) | ||
| 746 | #define MCF_GPIO_PPDSDR_FECH_PPDSDR_FECH4 (0x10) | ||
| 747 | #define MCF_GPIO_PPDSDR_FECH_PPDSDR_FECH5 (0x20) | ||
| 748 | #define MCF_GPIO_PPDSDR_FECH_PPDSDR_FECH6 (0x40) | ||
| 749 | #define MCF_GPIO_PPDSDR_FECH_PPDSDR_FECH7 (0x80) | ||
| 750 | |||
| 751 | /* Bit definitions and macros for MCF_GPIO_PPDSDR_FECL */ | ||
| 752 | #define MCF_GPIO_PPDSDR_FECL_PPDSDR_FECL0 (0x01) | ||
| 753 | #define MCF_GPIO_PPDSDR_FECL_PPDSDR_FECL1 (0x02) | ||
| 754 | #define MCF_GPIO_PPDSDR_FECL_PPDSDR_FECL2 (0x04) | ||
| 755 | #define MCF_GPIO_PPDSDR_FECL_PPDSDR_FECL3 (0x08) | ||
| 756 | #define MCF_GPIO_PPDSDR_FECL_PPDSDR_FECL4 (0x10) | ||
| 757 | #define MCF_GPIO_PPDSDR_FECL_PPDSDR_FECL5 (0x20) | ||
| 758 | #define MCF_GPIO_PPDSDR_FECL_PPDSDR_FECL6 (0x40) | ||
| 759 | #define MCF_GPIO_PPDSDR_FECL_PPDSDR_FECL7 (0x80) | ||
| 760 | |||
| 761 | /* Bit definitions and macros for MCF_GPIO_PPDSDR_SSI */ | ||
| 762 | #define MCF_GPIO_PPDSDR_SSI_PPDSDR_SSI0 (0x01) | ||
| 763 | #define MCF_GPIO_PPDSDR_SSI_PPDSDR_SSI1 (0x02) | ||
| 764 | #define MCF_GPIO_PPDSDR_SSI_PPDSDR_SSI2 (0x04) | ||
| 765 | #define MCF_GPIO_PPDSDR_SSI_PPDSDR_SSI3 (0x08) | ||
| 766 | #define MCF_GPIO_PPDSDR_SSI_PPDSDR_SSI4 (0x10) | ||
| 767 | |||
| 768 | /* Bit definitions and macros for MCF_GPIO_PPDSDR_BUSCTL */ | ||
| 769 | #define MCF_GPIO_PPDSDR_BUSCTL_POSDR_BUSCTL0 (0x01) | ||
| 770 | #define MCF_GPIO_PPDSDR_BUSCTL_PPDSDR_BUSCTL1 (0x02) | ||
| 771 | #define MCF_GPIO_PPDSDR_BUSCTL_PPDSDR_BUSCTL2 (0x04) | ||
| 772 | #define MCF_GPIO_PPDSDR_BUSCTL_PPDSDR_BUSCTL3 (0x08) | ||
| 773 | |||
| 774 | /* Bit definitions and macros for MCF_GPIO_PPDSDR_BE */ | ||
| 775 | #define MCF_GPIO_PPDSDR_BE_PPDSDR_BE0 (0x01) | ||
| 776 | #define MCF_GPIO_PPDSDR_BE_PPDSDR_BE1 (0x02) | ||
| 777 | #define MCF_GPIO_PPDSDR_BE_PPDSDR_BE2 (0x04) | ||
| 778 | #define MCF_GPIO_PPDSDR_BE_PPDSDR_BE3 (0x08) | ||
| 779 | |||
| 780 | /* Bit definitions and macros for MCF_GPIO_PPDSDR_CS */ | ||
| 781 | #define MCF_GPIO_PPDSDR_CS_PPDSDR_CS1 (0x02) | ||
| 782 | #define MCF_GPIO_PPDSDR_CS_PPDSDR_CS2 (0x04) | ||
| 783 | #define MCF_GPIO_PPDSDR_CS_PPDSDR_CS3 (0x08) | ||
| 784 | #define MCF_GPIO_PPDSDR_CS_PPDSDR_CS4 (0x10) | ||
| 785 | #define MCF_GPIO_PPDSDR_CS_PPDSDR_CS5 (0x20) | ||
| 786 | |||
| 787 | /* Bit definitions and macros for MCF_GPIO_PPDSDR_PWM */ | ||
| 788 | #define MCF_GPIO_PPDSDR_PWM_PPDSDR_PWM2 (0x04) | ||
| 789 | #define MCF_GPIO_PPDSDR_PWM_PPDSDR_PWM3 (0x08) | ||
| 790 | #define MCF_GPIO_PPDSDR_PWM_PPDSDR_PWM4 (0x10) | ||
| 791 | #define MCF_GPIO_PPDSDR_PWM_PPDSDR_PWM5 (0x20) | ||
| 792 | |||
| 793 | /* Bit definitions and macros for MCF_GPIO_PPDSDR_FECI2C */ | ||
| 794 | #define MCF_GPIO_PPDSDR_FECI2C_PPDSDR_FECI2C0 (0x01) | ||
| 795 | #define MCF_GPIO_PPDSDR_FECI2C_PPDSDR_FECI2C1 (0x02) | ||
| 796 | #define MCF_GPIO_PPDSDR_FECI2C_PPDSDR_FECI2C2 (0x04) | ||
| 797 | #define MCF_GPIO_PPDSDR_FECI2C_PPDSDR_FECI2C3 (0x08) | ||
| 798 | |||
| 799 | /* Bit definitions and macros for MCF_GPIO_PPDSDR_UART */ | ||
| 800 | #define MCF_GPIO_PPDSDR_UART_PPDSDR_UART0 (0x01) | ||
| 801 | #define MCF_GPIO_PPDSDR_UART_PPDSDR_UART1 (0x02) | ||
| 802 | #define MCF_GPIO_PPDSDR_UART_PPDSDR_UART2 (0x04) | ||
| 803 | #define MCF_GPIO_PPDSDR_UART_PPDSDR_UART3 (0x08) | ||
| 804 | #define MCF_GPIO_PPDSDR_UART_PPDSDR_UART4 (0x10) | ||
| 805 | #define MCF_GPIO_PPDSDR_UART_PPDSDR_UART5 (0x20) | ||
| 806 | #define MCF_GPIO_PPDSDR_UART_PPDSDR_UART6 (0x40) | ||
| 807 | #define MCF_GPIO_PPDSDR_UART_PPDSDR_UART7 (0x80) | ||
| 808 | |||
| 809 | /* Bit definitions and macros for MCF_GPIO_PPDSDR_QSPI */ | ||
| 810 | #define MCF_GPIO_PPDSDR_QSPI_PPDSDR_QSPI0 (0x01) | ||
| 811 | #define MCF_GPIO_PPDSDR_QSPI_PPDSDR_QSPI1 (0x02) | ||
| 812 | #define MCF_GPIO_PPDSDR_QSPI_PPDSDR_QSPI2 (0x04) | ||
| 813 | #define MCF_GPIO_PPDSDR_QSPI_PPDSDR_QSPI3 (0x08) | ||
| 814 | #define MCF_GPIO_PPDSDR_QSPI_PPDSDR_QSPI4 (0x10) | ||
| 815 | #define MCF_GPIO_PPDSDR_QSPI_PPDSDR_QSPI5 (0x20) | ||
| 816 | |||
| 817 | /* Bit definitions and macros for MCF_GPIO_PPDSDR_TIMER */ | ||
| 818 | #define MCF_GPIO_PPDSDR_TIMER_PPDSDR_TIMER0 (0x01) | ||
| 819 | #define MCF_GPIO_PPDSDR_TIMER_PPDSDR_TIMER1 (0x02) | ||
| 820 | #define MCF_GPIO_PPDSDR_TIMER_PPDSDR_TIMER2 (0x04) | ||
| 821 | #define MCF_GPIO_PPDSDR_TIMER_PPDSDR_TIMER3 (0x08) | ||
| 822 | |||
| 823 | /* Bit definitions and macros for MCF_GPIO_PPDSDR_LCDDATAH */ | ||
| 824 | #define MCF_GPIO_PPDSDR_LCDDATAH_PPDSDR_LCDDATAH0 (0x01) | ||
| 825 | #define MCF_GPIO_PPDSDR_LCDDATAH_PPDSDR_LCDDATAH1 (0x02) | ||
| 826 | |||
| 827 | /* Bit definitions and macros for MCF_GPIO_PPDSDR_LCDDATAM */ | ||
| 828 | #define MCF_GPIO_PPDSDR_LCDDATAM_PPDSDR_LCDDATAM0 (0x01) | ||
| 829 | #define MCF_GPIO_PPDSDR_LCDDATAM_PPDSDR_LCDDATAM1 (0x02) | ||
| 830 | #define MCF_GPIO_PPDSDR_LCDDATAM_PPDSDR_LCDDATAM2 (0x04) | ||
| 831 | #define MCF_GPIO_PPDSDR_LCDDATAM_PPDSDR_LCDDATAM3 (0x08) | ||
| 832 | #define MCF_GPIO_PPDSDR_LCDDATAM_PPDSDR_LCDDATAM4 (0x10) | ||
| 833 | #define MCF_GPIO_PPDSDR_LCDDATAM_PPDSDR_LCDDATAM5 (0x20) | ||
| 834 | #define MCF_GPIO_PPDSDR_LCDDATAM_PPDSDR_LCDDATAM6 (0x40) | ||
| 835 | #define MCF_GPIO_PPDSDR_LCDDATAM_PPDSDR_LCDDATAM7 (0x80) | ||
| 836 | |||
| 837 | /* Bit definitions and macros for MCF_GPIO_PPDSDR_LCDDATAL */ | ||
| 838 | #define MCF_GPIO_PPDSDR_LCDDATAL_PPDSDR_LCDDATAL0 (0x01) | ||
| 839 | #define MCF_GPIO_PPDSDR_LCDDATAL_PPDSDR_LCDDATAL1 (0x02) | ||
| 840 | #define MCF_GPIO_PPDSDR_LCDDATAL_PPDSDR_LCDDATAL2 (0x04) | ||
| 841 | #define MCF_GPIO_PPDSDR_LCDDATAL_PPDSDR_LCDDATAL3 (0x08) | ||
| 842 | #define MCF_GPIO_PPDSDR_LCDDATAL_PPDSDR_LCDDATAL4 (0x10) | ||
| 843 | #define MCF_GPIO_PPDSDR_LCDDATAL_PPDSDR_LCDDATAL5 (0x20) | ||
| 844 | #define MCF_GPIO_PPDSDR_LCDDATAL_PPDSDR_LCDDATAL6 (0x40) | ||
| 845 | #define MCF_GPIO_PPDSDR_LCDDATAL_PPDSDR_LCDDATAL7 (0x80) | ||
| 846 | |||
| 847 | /* Bit definitions and macros for MCF_GPIO_PPDSDR_LCDCTLH */ | ||
| 848 | #define MCF_GPIO_PPDSDR_LCDCTLH_PPDSDR_LCDCTLH0 (0x01) | ||
| 849 | |||
| 850 | /* Bit definitions and macros for MCF_GPIO_PPDSDR_LCDCTLL */ | ||
| 851 | #define MCF_GPIO_PPDSDR_LCDCTLL_PPDSDR_LCDCTLL0 (0x01) | ||
| 852 | #define MCF_GPIO_PPDSDR_LCDCTLL_PPDSDR_LCDCTLL1 (0x02) | ||
| 853 | #define MCF_GPIO_PPDSDR_LCDCTLL_PPDSDR_LCDCTLL2 (0x04) | ||
| 854 | #define MCF_GPIO_PPDSDR_LCDCTLL_PPDSDR_LCDCTLL3 (0x08) | ||
| 855 | #define MCF_GPIO_PPDSDR_LCDCTLL_PPDSDR_LCDCTLL4 (0x10) | ||
| 856 | #define MCF_GPIO_PPDSDR_LCDCTLL_PPDSDR_LCDCTLL5 (0x20) | ||
| 857 | #define MCF_GPIO_PPDSDR_LCDCTLL_PPDSDR_LCDCTLL6 (0x40) | ||
| 858 | #define MCF_GPIO_PPDSDR_LCDCTLL_PPDSDR_LCDCTLL7 (0x80) | ||
| 859 | |||
| 860 | /* Bit definitions and macros for MCF_GPIO_PCLRR_FECH */ | ||
| 861 | #define MCF_GPIO_PCLRR_FECH_PCLRR_FECH0 (0x01) | ||
| 862 | #define MCF_GPIO_PCLRR_FECH_PCLRR_FECH1 (0x02) | ||
| 863 | #define MCF_GPIO_PCLRR_FECH_PCLRR_FECH2 (0x04) | ||
| 864 | #define MCF_GPIO_PCLRR_FECH_PCLRR_FECH3 (0x08) | ||
| 865 | #define MCF_GPIO_PCLRR_FECH_PCLRR_FECH4 (0x10) | ||
| 866 | #define MCF_GPIO_PCLRR_FECH_PCLRR_FECH5 (0x20) | ||
| 867 | #define MCF_GPIO_PCLRR_FECH_PCLRR_FECH6 (0x40) | ||
| 868 | #define MCF_GPIO_PCLRR_FECH_PCLRR_FECH7 (0x80) | ||
| 869 | |||
| 870 | /* Bit definitions and macros for MCF_GPIO_PCLRR_FECL */ | ||
| 871 | #define MCF_GPIO_PCLRR_FECL_PCLRR_FECL0 (0x01) | ||
| 872 | #define MCF_GPIO_PCLRR_FECL_PCLRR_FECL1 (0x02) | ||
| 873 | #define MCF_GPIO_PCLRR_FECL_PCLRR_FECL2 (0x04) | ||
| 874 | #define MCF_GPIO_PCLRR_FECL_PCLRR_FECL3 (0x08) | ||
| 875 | #define MCF_GPIO_PCLRR_FECL_PCLRR_FECL4 (0x10) | ||
| 876 | #define MCF_GPIO_PCLRR_FECL_PCLRR_FECL5 (0x20) | ||
| 877 | #define MCF_GPIO_PCLRR_FECL_PCLRR_FECL6 (0x40) | ||
| 878 | #define MCF_GPIO_PCLRR_FECL_PCLRR_FECL7 (0x80) | ||
| 879 | |||
| 880 | /* Bit definitions and macros for MCF_GPIO_PCLRR_SSI */ | ||
| 881 | #define MCF_GPIO_PCLRR_SSI_PCLRR_SSI0 (0x01) | ||
| 882 | #define MCF_GPIO_PCLRR_SSI_PCLRR_SSI1 (0x02) | ||
| 883 | #define MCF_GPIO_PCLRR_SSI_PCLRR_SSI2 (0x04) | ||
| 884 | #define MCF_GPIO_PCLRR_SSI_PCLRR_SSI3 (0x08) | ||
| 885 | #define MCF_GPIO_PCLRR_SSI_PCLRR_SSI4 (0x10) | ||
| 886 | |||
| 887 | /* Bit definitions and macros for MCF_GPIO_PCLRR_BUSCTL */ | ||
| 888 | #define MCF_GPIO_PCLRR_BUSCTL_POSDR_BUSCTL0 (0x01) | ||
| 889 | #define MCF_GPIO_PCLRR_BUSCTL_PCLRR_BUSCTL1 (0x02) | ||
| 890 | #define MCF_GPIO_PCLRR_BUSCTL_PCLRR_BUSCTL2 (0x04) | ||
| 891 | #define MCF_GPIO_PCLRR_BUSCTL_PCLRR_BUSCTL3 (0x08) | ||
| 892 | |||
| 893 | /* Bit definitions and macros for MCF_GPIO_PCLRR_BE */ | ||
| 894 | #define MCF_GPIO_PCLRR_BE_PCLRR_BE0 (0x01) | ||
| 895 | #define MCF_GPIO_PCLRR_BE_PCLRR_BE1 (0x02) | ||
| 896 | #define MCF_GPIO_PCLRR_BE_PCLRR_BE2 (0x04) | ||
| 897 | #define MCF_GPIO_PCLRR_BE_PCLRR_BE3 (0x08) | ||
| 898 | |||
| 899 | /* Bit definitions and macros for MCF_GPIO_PCLRR_CS */ | ||
| 900 | #define MCF_GPIO_PCLRR_CS_PCLRR_CS1 (0x02) | ||
| 901 | #define MCF_GPIO_PCLRR_CS_PCLRR_CS2 (0x04) | ||
| 902 | #define MCF_GPIO_PCLRR_CS_PCLRR_CS3 (0x08) | ||
| 903 | #define MCF_GPIO_PCLRR_CS_PCLRR_CS4 (0x10) | ||
| 904 | #define MCF_GPIO_PCLRR_CS_PCLRR_CS5 (0x20) | ||
| 905 | |||
| 906 | /* Bit definitions and macros for MCF_GPIO_PCLRR_PWM */ | ||
| 907 | #define MCF_GPIO_PCLRR_PWM_PCLRR_PWM2 (0x04) | ||
| 908 | #define MCF_GPIO_PCLRR_PWM_PCLRR_PWM3 (0x08) | ||
| 909 | #define MCF_GPIO_PCLRR_PWM_PCLRR_PWM4 (0x10) | ||
| 910 | #define MCF_GPIO_PCLRR_PWM_PCLRR_PWM5 (0x20) | ||
| 911 | |||
| 912 | /* Bit definitions and macros for MCF_GPIO_PCLRR_FECI2C */ | ||
| 913 | #define MCF_GPIO_PCLRR_FECI2C_PCLRR_FECI2C0 (0x01) | ||
| 914 | #define MCF_GPIO_PCLRR_FECI2C_PCLRR_FECI2C1 (0x02) | ||
| 915 | #define MCF_GPIO_PCLRR_FECI2C_PCLRR_FECI2C2 (0x04) | ||
| 916 | #define MCF_GPIO_PCLRR_FECI2C_PCLRR_FECI2C3 (0x08) | ||
| 917 | |||
| 918 | /* Bit definitions and macros for MCF_GPIO_PCLRR_UART */ | ||
| 919 | #define MCF_GPIO_PCLRR_UART_PCLRR_UART0 (0x01) | ||
| 920 | #define MCF_GPIO_PCLRR_UART_PCLRR_UART1 (0x02) | ||
| 921 | #define MCF_GPIO_PCLRR_UART_PCLRR_UART2 (0x04) | ||
| 922 | #define MCF_GPIO_PCLRR_UART_PCLRR_UART3 (0x08) | ||
| 923 | #define MCF_GPIO_PCLRR_UART_PCLRR_UART4 (0x10) | ||
| 924 | #define MCF_GPIO_PCLRR_UART_PCLRR_UART5 (0x20) | ||
| 925 | #define MCF_GPIO_PCLRR_UART_PCLRR_UART6 (0x40) | ||
| 926 | #define MCF_GPIO_PCLRR_UART_PCLRR_UART7 (0x80) | ||
| 927 | |||
| 928 | /* Bit definitions and macros for MCF_GPIO_PCLRR_QSPI */ | ||
| 929 | #define MCF_GPIO_PCLRR_QSPI_PCLRR_QSPI0 (0x01) | ||
| 930 | #define MCF_GPIO_PCLRR_QSPI_PCLRR_QSPI1 (0x02) | ||
| 931 | #define MCF_GPIO_PCLRR_QSPI_PCLRR_QSPI2 (0x04) | ||
| 932 | #define MCF_GPIO_PCLRR_QSPI_PCLRR_QSPI3 (0x08) | ||
| 933 | #define MCF_GPIO_PCLRR_QSPI_PCLRR_QSPI4 (0x10) | ||
| 934 | #define MCF_GPIO_PCLRR_QSPI_PCLRR_QSPI5 (0x20) | ||
| 935 | |||
| 936 | /* Bit definitions and macros for MCF_GPIO_PCLRR_TIMER */ | ||
| 937 | #define MCF_GPIO_PCLRR_TIMER_PCLRR_TIMER0 (0x01) | ||
| 938 | #define MCF_GPIO_PCLRR_TIMER_PCLRR_TIMER1 (0x02) | ||
| 939 | #define MCF_GPIO_PCLRR_TIMER_PCLRR_TIMER2 (0x04) | ||
| 940 | #define MCF_GPIO_PCLRR_TIMER_PCLRR_TIMER3 (0x08) | ||
| 941 | |||
| 942 | /* Bit definitions and macros for MCF_GPIO_PCLRR_LCDDATAH */ | ||
| 943 | #define MCF_GPIO_PCLRR_LCDDATAH_PCLRR_LCDDATAH0 (0x01) | ||
| 944 | #define MCF_GPIO_PCLRR_LCDDATAH_PCLRR_LCDDATAH1 (0x02) | ||
| 945 | |||
| 946 | /* Bit definitions and macros for MCF_GPIO_PCLRR_LCDDATAM */ | ||
| 947 | #define MCF_GPIO_PCLRR_LCDDATAM_PCLRR_LCDDATAM0 (0x01) | ||
| 948 | #define MCF_GPIO_PCLRR_LCDDATAM_PCLRR_LCDDATAM1 (0x02) | ||
| 949 | #define MCF_GPIO_PCLRR_LCDDATAM_PCLRR_LCDDATAM2 (0x04) | ||
| 950 | #define MCF_GPIO_PCLRR_LCDDATAM_PCLRR_LCDDATAM3 (0x08) | ||
| 951 | #define MCF_GPIO_PCLRR_LCDDATAM_PCLRR_LCDDATAM4 (0x10) | ||
| 952 | #define MCF_GPIO_PCLRR_LCDDATAM_PCLRR_LCDDATAM5 (0x20) | ||
| 953 | #define MCF_GPIO_PCLRR_LCDDATAM_PCLRR_LCDDATAM6 (0x40) | ||
| 954 | #define MCF_GPIO_PCLRR_LCDDATAM_PCLRR_LCDDATAM7 (0x80) | ||
| 955 | |||
| 956 | /* Bit definitions and macros for MCF_GPIO_PCLRR_LCDDATAL */ | ||
| 957 | #define MCF_GPIO_PCLRR_LCDDATAL_PCLRR_LCDDATAL0 (0x01) | ||
| 958 | #define MCF_GPIO_PCLRR_LCDDATAL_PCLRR_LCDDATAL1 (0x02) | ||
| 959 | #define MCF_GPIO_PCLRR_LCDDATAL_PCLRR_LCDDATAL2 (0x04) | ||
| 960 | #define MCF_GPIO_PCLRR_LCDDATAL_PCLRR_LCDDATAL3 (0x08) | ||
| 961 | #define MCF_GPIO_PCLRR_LCDDATAL_PCLRR_LCDDATAL4 (0x10) | ||
| 962 | #define MCF_GPIO_PCLRR_LCDDATAL_PCLRR_LCDDATAL5 (0x20) | ||
| 963 | #define MCF_GPIO_PCLRR_LCDDATAL_PCLRR_LCDDATAL6 (0x40) | ||
| 964 | #define MCF_GPIO_PCLRR_LCDDATAL_PCLRR_LCDDATAL7 (0x80) | ||
| 965 | |||
| 966 | /* Bit definitions and macros for MCF_GPIO_PCLRR_LCDCTLH */ | ||
| 967 | #define MCF_GPIO_PCLRR_LCDCTLH_PCLRR_LCDCTLH0 (0x01) | ||
| 968 | |||
| 969 | /* Bit definitions and macros for MCF_GPIO_PCLRR_LCDCTLL */ | ||
| 970 | #define MCF_GPIO_PCLRR_LCDCTLL_PCLRR_LCDCTLL0 (0x01) | ||
| 971 | #define MCF_GPIO_PCLRR_LCDCTLL_PCLRR_LCDCTLL1 (0x02) | ||
| 972 | #define MCF_GPIO_PCLRR_LCDCTLL_PCLRR_LCDCTLL2 (0x04) | ||
| 973 | #define MCF_GPIO_PCLRR_LCDCTLL_PCLRR_LCDCTLL3 (0x08) | ||
| 974 | #define MCF_GPIO_PCLRR_LCDCTLL_PCLRR_LCDCTLL4 (0x10) | ||
| 975 | #define MCF_GPIO_PCLRR_LCDCTLL_PCLRR_LCDCTLL5 (0x20) | ||
| 976 | #define MCF_GPIO_PCLRR_LCDCTLL_PCLRR_LCDCTLL6 (0x40) | ||
| 977 | #define MCF_GPIO_PCLRR_LCDCTLL_PCLRR_LCDCTLL7 (0x80) | ||
| 978 | |||
| 979 | /* Bit definitions and macros for MCF_GPIO_PAR_FEC */ | ||
| 980 | #define MCF_GPIO_PAR_FEC_PAR_FEC_MII(x) (((x)&0x03)<<0) | ||
| 981 | #define MCF_GPIO_PAR_FEC_PAR_FEC_7W(x) (((x)&0x03)<<2) | ||
| 982 | #define MCF_GPIO_PAR_FEC_PAR_FEC_7W_GPIO (0x00) | ||
| 983 | #define MCF_GPIO_PAR_FEC_PAR_FEC_7W_URTS1 (0x04) | ||
| 984 | #define MCF_GPIO_PAR_FEC_PAR_FEC_7W_FEC (0x0C) | ||
| 985 | #define MCF_GPIO_PAR_FEC_PAR_FEC_MII_GPIO (0x00) | ||
| 986 | #define MCF_GPIO_PAR_FEC_PAR_FEC_MII_UART (0x01) | ||
| 987 | #define MCF_GPIO_PAR_FEC_PAR_FEC_MII_FEC (0x03) | ||
| 988 | |||
| 989 | /* Bit definitions and macros for MCF_GPIO_PAR_PWM */ | ||
| 990 | #define MCF_GPIO_PAR_PWM_PAR_PWM1(x) (((x)&0x03)<<0) | ||
| 991 | #define MCF_GPIO_PAR_PWM_PAR_PWM3(x) (((x)&0x03)<<2) | ||
| 992 | #define MCF_GPIO_PAR_PWM_PAR_PWM5 (0x10) | ||
| 993 | #define MCF_GPIO_PAR_PWM_PAR_PWM7 (0x20) | ||
| 994 | |||
| 995 | /* Bit definitions and macros for MCF_GPIO_PAR_BUSCTL */ | ||
| 996 | #define MCF_GPIO_PAR_BUSCTL_PAR_TS(x) (((x)&0x03)<<3) | ||
| 997 | #define MCF_GPIO_PAR_BUSCTL_PAR_RWB (0x20) | ||
| 998 | #define MCF_GPIO_PAR_BUSCTL_PAR_TA (0x40) | ||
| 999 | #define MCF_GPIO_PAR_BUSCTL_PAR_OE (0x80) | ||
| 1000 | #define MCF_GPIO_PAR_BUSCTL_PAR_OE_GPIO (0x00) | ||
| 1001 | #define MCF_GPIO_PAR_BUSCTL_PAR_OE_OE (0x80) | ||
| 1002 | #define MCF_GPIO_PAR_BUSCTL_PAR_TA_GPIO (0x00) | ||
| 1003 | #define MCF_GPIO_PAR_BUSCTL_PAR_TA_TA (0x40) | ||
| 1004 | #define MCF_GPIO_PAR_BUSCTL_PAR_RWB_GPIO (0x00) | ||
| 1005 | #define MCF_GPIO_PAR_BUSCTL_PAR_RWB_RWB (0x20) | ||
| 1006 | #define MCF_GPIO_PAR_BUSCTL_PAR_TS_GPIO (0x00) | ||
| 1007 | #define MCF_GPIO_PAR_BUSCTL_PAR_TS_DACK0 (0x10) | ||
| 1008 | #define MCF_GPIO_PAR_BUSCTL_PAR_TS_TS (0x18) | ||
| 1009 | |||
| 1010 | /* Bit definitions and macros for MCF_GPIO_PAR_FECI2C */ | ||
| 1011 | #define MCF_GPIO_PAR_FECI2C_PAR_SDA(x) (((x)&0x03)<<0) | ||
| 1012 | #define MCF_GPIO_PAR_FECI2C_PAR_SCL(x) (((x)&0x03)<<2) | ||
| 1013 | #define MCF_GPIO_PAR_FECI2C_PAR_MDIO(x) (((x)&0x03)<<4) | ||
| 1014 | #define MCF_GPIO_PAR_FECI2C_PAR_MDC(x) (((x)&0x03)<<6) | ||
| 1015 | #define MCF_GPIO_PAR_FECI2C_PAR_MDC_GPIO (0x00) | ||
| 1016 | #define MCF_GPIO_PAR_FECI2C_PAR_MDC_UTXD2 (0x40) | ||
| 1017 | #define MCF_GPIO_PAR_FECI2C_PAR_MDC_SCL (0x80) | ||
| 1018 | #define MCF_GPIO_PAR_FECI2C_PAR_MDC_EMDC (0xC0) | ||
| 1019 | #define MCF_GPIO_PAR_FECI2C_PAR_MDIO_GPIO (0x00) | ||
| 1020 | #define MCF_GPIO_PAR_FECI2C_PAR_MDIO_URXD2 (0x10) | ||
| 1021 | #define MCF_GPIO_PAR_FECI2C_PAR_MDIO_SDA (0x20) | ||
| 1022 | #define MCF_GPIO_PAR_FECI2C_PAR_MDIO_EMDIO (0x30) | ||
| 1023 | #define MCF_GPIO_PAR_FECI2C_PAR_SCL_GPIO (0x00) | ||
| 1024 | #define MCF_GPIO_PAR_FECI2C_PAR_SCL_UTXD2 (0x04) | ||
| 1025 | #define MCF_GPIO_PAR_FECI2C_PAR_SCL_SCL (0x0C) | ||
| 1026 | #define MCF_GPIO_PAR_FECI2C_PAR_SDA_GPIO (0x00) | ||
| 1027 | #define MCF_GPIO_PAR_FECI2C_PAR_SDA_URXD2 (0x02) | ||
| 1028 | #define MCF_GPIO_PAR_FECI2C_PAR_SDA_SDA (0x03) | ||
| 1029 | |||
| 1030 | /* Bit definitions and macros for MCF_GPIO_PAR_BE */ | ||
| 1031 | #define MCF_GPIO_PAR_BE_PAR_BE0 (0x01) | ||
| 1032 | #define MCF_GPIO_PAR_BE_PAR_BE1 (0x02) | ||
| 1033 | #define MCF_GPIO_PAR_BE_PAR_BE2 (0x04) | ||
| 1034 | #define MCF_GPIO_PAR_BE_PAR_BE3 (0x08) | ||
| 1035 | |||
| 1036 | /* Bit definitions and macros for MCF_GPIO_PAR_CS */ | ||
| 1037 | #define MCF_GPIO_PAR_CS_PAR_CS1 (0x02) | ||
| 1038 | #define MCF_GPIO_PAR_CS_PAR_CS2 (0x04) | ||
| 1039 | #define MCF_GPIO_PAR_CS_PAR_CS3 (0x08) | ||
| 1040 | #define MCF_GPIO_PAR_CS_PAR_CS4 (0x10) | ||
| 1041 | #define MCF_GPIO_PAR_CS_PAR_CS5 (0x20) | ||
| 1042 | #define MCF_GPIO_PAR_CS_PAR_CS_CS1_GPIO (0x00) | ||
| 1043 | #define MCF_GPIO_PAR_CS_PAR_CS_CS1_SDCS1 (0x01) | ||
| 1044 | #define MCF_GPIO_PAR_CS_PAR_CS_CS1_CS1 (0x03) | ||
| 1045 | |||
| 1046 | /* Bit definitions and macros for MCF_GPIO_PAR_SSI */ | ||
| 1047 | #define MCF_GPIO_PAR_SSI_PAR_MCLK (0x0080) | ||
| 1048 | #define MCF_GPIO_PAR_SSI_PAR_TXD(x) (((x)&0x0003)<<8) | ||
| 1049 | #define MCF_GPIO_PAR_SSI_PAR_RXD(x) (((x)&0x0003)<<10) | ||
| 1050 | #define MCF_GPIO_PAR_SSI_PAR_FS(x) (((x)&0x0003)<<12) | ||
| 1051 | #define MCF_GPIO_PAR_SSI_PAR_BCLK(x) (((x)&0x0003)<<14) | ||
| 1052 | |||
| 1053 | /* Bit definitions and macros for MCF_GPIO_PAR_UART */ | ||
| 1054 | #define MCF_GPIO_PAR_UART_PAR_UTXD0 (0x0001) | ||
| 1055 | #define MCF_GPIO_PAR_UART_PAR_URXD0 (0x0002) | ||
| 1056 | #define MCF_GPIO_PAR_UART_PAR_URTS0 (0x0004) | ||
| 1057 | #define MCF_GPIO_PAR_UART_PAR_UCTS0 (0x0008) | ||
| 1058 | #define MCF_GPIO_PAR_UART_PAR_UTXD1(x) (((x)&0x0003)<<4) | ||
| 1059 | #define MCF_GPIO_PAR_UART_PAR_URXD1(x) (((x)&0x0003)<<6) | ||
| 1060 | #define MCF_GPIO_PAR_UART_PAR_URTS1(x) (((x)&0x0003)<<8) | ||
| 1061 | #define MCF_GPIO_PAR_UART_PAR_UCTS1(x) (((x)&0x0003)<<10) | ||
| 1062 | #define MCF_GPIO_PAR_UART_PAR_UCTS1_GPIO (0x0000) | ||
| 1063 | #define MCF_GPIO_PAR_UART_PAR_UCTS1_SSI_BCLK (0x0800) | ||
| 1064 | #define MCF_GPIO_PAR_UART_PAR_UCTS1_ULPI_D7 (0x0400) | ||
| 1065 | #define MCF_GPIO_PAR_UART_PAR_UCTS1_UCTS1 (0x0C00) | ||
| 1066 | #define MCF_GPIO_PAR_UART_PAR_URTS1_GPIO (0x0000) | ||
| 1067 | #define MCF_GPIO_PAR_UART_PAR_URTS1_SSI_FS (0x0200) | ||
| 1068 | #define MCF_GPIO_PAR_UART_PAR_URTS1_ULPI_D6 (0x0100) | ||
| 1069 | #define MCF_GPIO_PAR_UART_PAR_URTS1_URTS1 (0x0300) | ||
| 1070 | #define MCF_GPIO_PAR_UART_PAR_URXD1_GPIO (0x0000) | ||
| 1071 | #define MCF_GPIO_PAR_UART_PAR_URXD1_SSI_RXD (0x0080) | ||
| 1072 | #define MCF_GPIO_PAR_UART_PAR_URXD1_ULPI_D5 (0x0040) | ||
| 1073 | #define MCF_GPIO_PAR_UART_PAR_URXD1_URXD1 (0x00C0) | ||
| 1074 | #define MCF_GPIO_PAR_UART_PAR_UTXD1_GPIO (0x0000) | ||
| 1075 | #define MCF_GPIO_PAR_UART_PAR_UTXD1_SSI_TXD (0x0020) | ||
| 1076 | #define MCF_GPIO_PAR_UART_PAR_UTXD1_ULPI_D4 (0x0010) | ||
| 1077 | #define MCF_GPIO_PAR_UART_PAR_UTXD1_UTXD1 (0x0030) | ||
| 1078 | |||
| 1079 | /* Bit definitions and macros for MCF_GPIO_PAR_QSPI */ | ||
| 1080 | #define MCF_GPIO_PAR_QSPI_PAR_SCK(x) (((x)&0x0003)<<4) | ||
| 1081 | #define MCF_GPIO_PAR_QSPI_PAR_DOUT(x) (((x)&0x0003)<<6) | ||
| 1082 | #define MCF_GPIO_PAR_QSPI_PAR_DIN(x) (((x)&0x0003)<<8) | ||
| 1083 | #define MCF_GPIO_PAR_QSPI_PAR_PCS0(x) (((x)&0x0003)<<10) | ||
| 1084 | #define MCF_GPIO_PAR_QSPI_PAR_PCS1(x) (((x)&0x0003)<<12) | ||
| 1085 | #define MCF_GPIO_PAR_QSPI_PAR_PCS2(x) (((x)&0x0003)<<14) | ||
| 1086 | |||
| 1087 | /* Bit definitions and macros for MCF_GPIO_PAR_TIMER */ | ||
| 1088 | #define MCF_GPIO_PAR_TIMER_PAR_TIN0(x) (((x)&0x03)<<0) | ||
| 1089 | #define MCF_GPIO_PAR_TIMER_PAR_TIN1(x) (((x)&0x03)<<2) | ||
| 1090 | #define MCF_GPIO_PAR_TIMER_PAR_TIN2(x) (((x)&0x03)<<4) | ||
| 1091 | #define MCF_GPIO_PAR_TIMER_PAR_TIN3(x) (((x)&0x03)<<6) | ||
| 1092 | #define MCF_GPIO_PAR_TIMER_PAR_TIN3_GPIO (0x00) | ||
| 1093 | #define MCF_GPIO_PAR_TIMER_PAR_TIN3_TOUT3 (0x80) | ||
| 1094 | #define MCF_GPIO_PAR_TIMER_PAR_TIN3_URXD2 (0x40) | ||
| 1095 | #define MCF_GPIO_PAR_TIMER_PAR_TIN3_TIN3 (0xC0) | ||
| 1096 | #define MCF_GPIO_PAR_TIMER_PAR_TIN2_GPIO (0x00) | ||
| 1097 | #define MCF_GPIO_PAR_TIMER_PAR_TIN2_TOUT2 (0x20) | ||
| 1098 | #define MCF_GPIO_PAR_TIMER_PAR_TIN2_UTXD2 (0x10) | ||
| 1099 | #define MCF_GPIO_PAR_TIMER_PAR_TIN2_TIN2 (0x30) | ||
| 1100 | #define MCF_GPIO_PAR_TIMER_PAR_TIN1_GPIO (0x00) | ||
| 1101 | #define MCF_GPIO_PAR_TIMER_PAR_TIN1_TOUT1 (0x08) | ||
| 1102 | #define MCF_GPIO_PAR_TIMER_PAR_TIN1_DACK1 (0x04) | ||
| 1103 | #define MCF_GPIO_PAR_TIMER_PAR_TIN1_TIN1 (0x0C) | ||
| 1104 | #define MCF_GPIO_PAR_TIMER_PAR_TIN0_GPIO (0x00) | ||
| 1105 | #define MCF_GPIO_PAR_TIMER_PAR_TIN0_TOUT0 (0x02) | ||
| 1106 | #define MCF_GPIO_PAR_TIMER_PAR_TIN0_DREQ0 (0x01) | ||
| 1107 | #define MCF_GPIO_PAR_TIMER_PAR_TIN0_TIN0 (0x03) | ||
| 1108 | |||
| 1109 | /* Bit definitions and macros for MCF_GPIO_PAR_LCDDATA */ | ||
| 1110 | #define MCF_GPIO_PAR_LCDDATA_PAR_LD7_0(x) (((x)&0x03)<<0) | ||
| 1111 | #define MCF_GPIO_PAR_LCDDATA_PAR_LD15_8(x) (((x)&0x03)<<2) | ||
| 1112 | #define MCF_GPIO_PAR_LCDDATA_PAR_LD16(x) (((x)&0x03)<<4) | ||
| 1113 | #define MCF_GPIO_PAR_LCDDATA_PAR_LD17(x) (((x)&0x03)<<6) | ||
| 1114 | |||
| 1115 | /* Bit definitions and macros for MCF_GPIO_PAR_LCDCTL */ | ||
| 1116 | #define MCF_GPIO_PAR_LCDCTL_PAR_CLS (0x0001) | ||
| 1117 | #define MCF_GPIO_PAR_LCDCTL_PAR_PS (0x0002) | ||
| 1118 | #define MCF_GPIO_PAR_LCDCTL_PAR_REV (0x0004) | ||
| 1119 | #define MCF_GPIO_PAR_LCDCTL_PAR_SPL_SPR (0x0008) | ||
| 1120 | #define MCF_GPIO_PAR_LCDCTL_PAR_CONTRAST (0x0010) | ||
| 1121 | #define MCF_GPIO_PAR_LCDCTL_PAR_LSCLK (0x0020) | ||
| 1122 | #define MCF_GPIO_PAR_LCDCTL_PAR_LP_HSYNC (0x0040) | ||
| 1123 | #define MCF_GPIO_PAR_LCDCTL_PAR_FLM_VSYNC (0x0080) | ||
| 1124 | #define MCF_GPIO_PAR_LCDCTL_PAR_ACD_OE (0x0100) | ||
| 1125 | |||
| 1126 | /* Bit definitions and macros for MCF_GPIO_PAR_IRQ */ | ||
| 1127 | #define MCF_GPIO_PAR_IRQ_PAR_IRQ1(x) (((x)&0x0003)<<4) | ||
| 1128 | #define MCF_GPIO_PAR_IRQ_PAR_IRQ2(x) (((x)&0x0003)<<6) | ||
| 1129 | #define MCF_GPIO_PAR_IRQ_PAR_IRQ4(x) (((x)&0x0003)<<8) | ||
| 1130 | #define MCF_GPIO_PAR_IRQ_PAR_IRQ5(x) (((x)&0x0003)<<10) | ||
| 1131 | #define MCF_GPIO_PAR_IRQ_PAR_IRQ6(x) (((x)&0x0003)<<12) | ||
| 1132 | |||
| 1133 | /* Bit definitions and macros for MCF_GPIO_MSCR_FLEXBUS */ | ||
| 1134 | #define MCF_GPIO_MSCR_FLEXBUS_MSCR_ADDRCTL(x) (((x)&0x03)<<0) | ||
| 1135 | #define MCF_GPIO_MSCR_FLEXBUS_MSCR_DLOWER(x) (((x)&0x03)<<2) | ||
| 1136 | #define MCF_GPIO_MSCR_FLEXBUS_MSCR_DUPPER(x) (((x)&0x03)<<4) | ||
| 1137 | |||
| 1138 | /* Bit definitions and macros for MCF_GPIO_MSCR_SDRAM */ | ||
| 1139 | #define MCF_GPIO_MSCR_SDRAM_MSCR_SDRAM(x) (((x)&0x03)<<0) | ||
| 1140 | #define MCF_GPIO_MSCR_SDRAM_MSCR_SDCLK(x) (((x)&0x03)<<2) | ||
| 1141 | #define MCF_GPIO_MSCR_SDRAM_MSCR_SDCLKB(x) (((x)&0x03)<<4) | ||
| 1142 | |||
| 1143 | /* Bit definitions and macros for MCF_GPIO_DSCR_I2C */ | ||
| 1144 | #define MCF_GPIO_DSCR_I2C_I2C_DSE(x) (((x)&0x03)<<0) | ||
| 1145 | |||
| 1146 | /* Bit definitions and macros for MCF_GPIO_DSCR_PWM */ | ||
| 1147 | #define MCF_GPIO_DSCR_PWM_PWM_DSE(x) (((x)&0x03)<<0) | ||
| 1148 | |||
| 1149 | /* Bit definitions and macros for MCF_GPIO_DSCR_FEC */ | ||
| 1150 | #define MCF_GPIO_DSCR_FEC_FEC_DSE(x) (((x)&0x03)<<0) | ||
| 1151 | |||
| 1152 | /* Bit definitions and macros for MCF_GPIO_DSCR_UART */ | ||
| 1153 | #define MCF_GPIO_DSCR_UART_UART0_DSE(x) (((x)&0x03)<<0) | ||
| 1154 | #define MCF_GPIO_DSCR_UART_UART1_DSE(x) (((x)&0x03)<<2) | ||
| 1155 | |||
| 1156 | /* Bit definitions and macros for MCF_GPIO_DSCR_QSPI */ | ||
| 1157 | #define MCF_GPIO_DSCR_QSPI_QSPI_DSE(x) (((x)&0x03)<<0) | ||
| 1158 | |||
| 1159 | /* Bit definitions and macros for MCF_GPIO_DSCR_TIMER */ | ||
| 1160 | #define MCF_GPIO_DSCR_TIMER_TIMER_DSE(x) (((x)&0x03)<<0) | ||
| 1161 | |||
| 1162 | /* Bit definitions and macros for MCF_GPIO_DSCR_SSI */ | ||
| 1163 | #define MCF_GPIO_DSCR_SSI_SSI_DSE(x) (((x)&0x03)<<0) | ||
| 1164 | |||
| 1165 | /* Bit definitions and macros for MCF_GPIO_DSCR_LCD */ | ||
| 1166 | #define MCF_GPIO_DSCR_LCD_LCD_DSE(x) (((x)&0x03)<<0) | ||
| 1167 | |||
| 1168 | /* Bit definitions and macros for MCF_GPIO_DSCR_DEBUG */ | ||
| 1169 | #define MCF_GPIO_DSCR_DEBUG_DEBUG_DSE(x) (((x)&0x03)<<0) | ||
| 1170 | |||
| 1171 | /* Bit definitions and macros for MCF_GPIO_DSCR_CLKRST */ | ||
| 1172 | #define MCF_GPIO_DSCR_CLKRST_CLKRST_DSE(x) (((x)&0x03)<<0) | ||
| 1173 | |||
| 1174 | /* Bit definitions and macros for MCF_GPIO_DSCR_IRQ */ | ||
| 1175 | #define MCF_GPIO_DSCR_IRQ_IRQ_DSE(x) (((x)&0x03)<<0) | ||
| 1176 | |||
| 1177 | /********************************************************************* | ||
| 1178 | * | ||
| 1179 | * Interrupt Controller (INTC) | ||
| 1180 | * | ||
| 1181 | *********************************************************************/ | ||
| 1182 | |||
| 1183 | /* Register read/write macros */ | ||
| 1184 | #define MCF_INTC0_IPRH MCF_REG32(0xFC048000) | ||
| 1185 | #define MCF_INTC0_IPRL MCF_REG32(0xFC048004) | ||
| 1186 | #define MCF_INTC0_IMRH MCF_REG32(0xFC048008) | ||
| 1187 | #define MCF_INTC0_IMRL MCF_REG32(0xFC04800C) | ||
| 1188 | #define MCF_INTC0_INTFRCH MCF_REG32(0xFC048010) | ||
| 1189 | #define MCF_INTC0_INTFRCL MCF_REG32(0xFC048014) | ||
| 1190 | #define MCF_INTC0_ICONFIG MCF_REG16(0xFC04801A) | ||
| 1191 | #define MCF_INTC0_SIMR MCF_REG08(0xFC04801C) | ||
| 1192 | #define MCF_INTC0_CIMR MCF_REG08(0xFC04801D) | ||
| 1193 | #define MCF_INTC0_CLMASK MCF_REG08(0xFC04801E) | ||
| 1194 | #define MCF_INTC0_SLMASK MCF_REG08(0xFC04801F) | ||
| 1195 | #define MCF_INTC0_ICR0 MCF_REG08(0xFC048040) | ||
| 1196 | #define MCF_INTC0_ICR1 MCF_REG08(0xFC048041) | ||
| 1197 | #define MCF_INTC0_ICR2 MCF_REG08(0xFC048042) | ||
| 1198 | #define MCF_INTC0_ICR3 MCF_REG08(0xFC048043) | ||
| 1199 | #define MCF_INTC0_ICR4 MCF_REG08(0xFC048044) | ||
| 1200 | #define MCF_INTC0_ICR5 MCF_REG08(0xFC048045) | ||
| 1201 | #define MCF_INTC0_ICR6 MCF_REG08(0xFC048046) | ||
| 1202 | #define MCF_INTC0_ICR7 MCF_REG08(0xFC048047) | ||
| 1203 | #define MCF_INTC0_ICR8 MCF_REG08(0xFC048048) | ||
| 1204 | #define MCF_INTC0_ICR9 MCF_REG08(0xFC048049) | ||
| 1205 | #define MCF_INTC0_ICR10 MCF_REG08(0xFC04804A) | ||
| 1206 | #define MCF_INTC0_ICR11 MCF_REG08(0xFC04804B) | ||
| 1207 | #define MCF_INTC0_ICR12 MCF_REG08(0xFC04804C) | ||
| 1208 | #define MCF_INTC0_ICR13 MCF_REG08(0xFC04804D) | ||
| 1209 | #define MCF_INTC0_ICR14 MCF_REG08(0xFC04804E) | ||
| 1210 | #define MCF_INTC0_ICR15 MCF_REG08(0xFC04804F) | ||
| 1211 | #define MCF_INTC0_ICR16 MCF_REG08(0xFC048050) | ||
| 1212 | #define MCF_INTC0_ICR17 MCF_REG08(0xFC048051) | ||
| 1213 | #define MCF_INTC0_ICR18 MCF_REG08(0xFC048052) | ||
| 1214 | #define MCF_INTC0_ICR19 MCF_REG08(0xFC048053) | ||
| 1215 | #define MCF_INTC0_ICR20 MCF_REG08(0xFC048054) | ||
| 1216 | #define MCF_INTC0_ICR21 MCF_REG08(0xFC048055) | ||
| 1217 | #define MCF_INTC0_ICR22 MCF_REG08(0xFC048056) | ||
| 1218 | #define MCF_INTC0_ICR23 MCF_REG08(0xFC048057) | ||
| 1219 | #define MCF_INTC0_ICR24 MCF_REG08(0xFC048058) | ||
| 1220 | #define MCF_INTC0_ICR25 MCF_REG08(0xFC048059) | ||
| 1221 | #define MCF_INTC0_ICR26 MCF_REG08(0xFC04805A) | ||
| 1222 | #define MCF_INTC0_ICR27 MCF_REG08(0xFC04805B) | ||
| 1223 | #define MCF_INTC0_ICR28 MCF_REG08(0xFC04805C) | ||
| 1224 | #define MCF_INTC0_ICR29 MCF_REG08(0xFC04805D) | ||
| 1225 | #define MCF_INTC0_ICR30 MCF_REG08(0xFC04805E) | ||
| 1226 | #define MCF_INTC0_ICR31 MCF_REG08(0xFC04805F) | ||
| 1227 | #define MCF_INTC0_ICR32 MCF_REG08(0xFC048060) | ||
| 1228 | #define MCF_INTC0_ICR33 MCF_REG08(0xFC048061) | ||
| 1229 | #define MCF_INTC0_ICR34 MCF_REG08(0xFC048062) | ||
| 1230 | #define MCF_INTC0_ICR35 MCF_REG08(0xFC048063) | ||
| 1231 | #define MCF_INTC0_ICR36 MCF_REG08(0xFC048064) | ||
| 1232 | #define MCF_INTC0_ICR37 MCF_REG08(0xFC048065) | ||
| 1233 | #define MCF_INTC0_ICR38 MCF_REG08(0xFC048066) | ||
| 1234 | #define MCF_INTC0_ICR39 MCF_REG08(0xFC048067) | ||
| 1235 | #define MCF_INTC0_ICR40 MCF_REG08(0xFC048068) | ||
| 1236 | #define MCF_INTC0_ICR41 MCF_REG08(0xFC048069) | ||
| 1237 | #define MCF_INTC0_ICR42 MCF_REG08(0xFC04806A) | ||
| 1238 | #define MCF_INTC0_ICR43 MCF_REG08(0xFC04806B) | ||
| 1239 | #define MCF_INTC0_ICR44 MCF_REG08(0xFC04806C) | ||
| 1240 | #define MCF_INTC0_ICR45 MCF_REG08(0xFC04806D) | ||
| 1241 | #define MCF_INTC0_ICR46 MCF_REG08(0xFC04806E) | ||
| 1242 | #define MCF_INTC0_ICR47 MCF_REG08(0xFC04806F) | ||
| 1243 | #define MCF_INTC0_ICR48 MCF_REG08(0xFC048070) | ||
| 1244 | #define MCF_INTC0_ICR49 MCF_REG08(0xFC048071) | ||
| 1245 | #define MCF_INTC0_ICR50 MCF_REG08(0xFC048072) | ||
| 1246 | #define MCF_INTC0_ICR51 MCF_REG08(0xFC048073) | ||
| 1247 | #define MCF_INTC0_ICR52 MCF_REG08(0xFC048074) | ||
| 1248 | #define MCF_INTC0_ICR53 MCF_REG08(0xFC048075) | ||
| 1249 | #define MCF_INTC0_ICR54 MCF_REG08(0xFC048076) | ||
| 1250 | #define MCF_INTC0_ICR55 MCF_REG08(0xFC048077) | ||
| 1251 | #define MCF_INTC0_ICR56 MCF_REG08(0xFC048078) | ||
| 1252 | #define MCF_INTC0_ICR57 MCF_REG08(0xFC048079) | ||
| 1253 | #define MCF_INTC0_ICR58 MCF_REG08(0xFC04807A) | ||
| 1254 | #define MCF_INTC0_ICR59 MCF_REG08(0xFC04807B) | ||
| 1255 | #define MCF_INTC0_ICR60 MCF_REG08(0xFC04807C) | ||
| 1256 | #define MCF_INTC0_ICR61 MCF_REG08(0xFC04807D) | ||
| 1257 | #define MCF_INTC0_ICR62 MCF_REG08(0xFC04807E) | ||
| 1258 | #define MCF_INTC0_ICR63 MCF_REG08(0xFC04807F) | ||
| 1259 | #define MCF_INTC0_ICR(x) MCF_REG08(0xFC048040+((x)*0x001)) | ||
| 1260 | #define MCF_INTC0_SWIACK MCF_REG08(0xFC0480E0) | ||
| 1261 | #define MCF_INTC0_L1IACK MCF_REG08(0xFC0480E4) | ||
| 1262 | #define MCF_INTC0_L2IACK MCF_REG08(0xFC0480E8) | ||
| 1263 | #define MCF_INTC0_L3IACK MCF_REG08(0xFC0480EC) | ||
| 1264 | #define MCF_INTC0_L4IACK MCF_REG08(0xFC0480F0) | ||
| 1265 | #define MCF_INTC0_L5IACK MCF_REG08(0xFC0480F4) | ||
| 1266 | #define MCF_INTC0_L6IACK MCF_REG08(0xFC0480F8) | ||
| 1267 | #define MCF_INTC0_L7IACK MCF_REG08(0xFC0480FC) | ||
| 1268 | #define MCF_INTC0_LIACK(x) MCF_REG08(0xFC0480E4+((x)*0x004)) | ||
| 1269 | #define MCF_INTC1_IPRH MCF_REG32(0xFC04C000) | ||
| 1270 | #define MCF_INTC1_IPRL MCF_REG32(0xFC04C004) | ||
| 1271 | #define MCF_INTC1_IMRH MCF_REG32(0xFC04C008) | ||
| 1272 | #define MCF_INTC1_IMRL MCF_REG32(0xFC04C00C) | ||
| 1273 | #define MCF_INTC1_INTFRCH MCF_REG32(0xFC04C010) | ||
| 1274 | #define MCF_INTC1_INTFRCL MCF_REG32(0xFC04C014) | ||
| 1275 | #define MCF_INTC1_ICONFIG MCF_REG16(0xFC04C01A) | ||
| 1276 | #define MCF_INTC1_SIMR MCF_REG08(0xFC04C01C) | ||
| 1277 | #define MCF_INTC1_CIMR MCF_REG08(0xFC04C01D) | ||
| 1278 | #define MCF_INTC1_CLMASK MCF_REG08(0xFC04C01E) | ||
| 1279 | #define MCF_INTC1_SLMASK MCF_REG08(0xFC04C01F) | ||
| 1280 | #define MCF_INTC1_ICR0 MCF_REG08(0xFC04C040) | ||
| 1281 | #define MCF_INTC1_ICR1 MCF_REG08(0xFC04C041) | ||
| 1282 | #define MCF_INTC1_ICR2 MCF_REG08(0xFC04C042) | ||
| 1283 | #define MCF_INTC1_ICR3 MCF_REG08(0xFC04C043) | ||
| 1284 | #define MCF_INTC1_ICR4 MCF_REG08(0xFC04C044) | ||
| 1285 | #define MCF_INTC1_ICR5 MCF_REG08(0xFC04C045) | ||
| 1286 | #define MCF_INTC1_ICR6 MCF_REG08(0xFC04C046) | ||
| 1287 | #define MCF_INTC1_ICR7 MCF_REG08(0xFC04C047) | ||
| 1288 | #define MCF_INTC1_ICR8 MCF_REG08(0xFC04C048) | ||
| 1289 | #define MCF_INTC1_ICR9 MCF_REG08(0xFC04C049) | ||
| 1290 | #define MCF_INTC1_ICR10 MCF_REG08(0xFC04C04A) | ||
| 1291 | #define MCF_INTC1_ICR11 MCF_REG08(0xFC04C04B) | ||
| 1292 | #define MCF_INTC1_ICR12 MCF_REG08(0xFC04C04C) | ||
| 1293 | #define MCF_INTC1_ICR13 MCF_REG08(0xFC04C04D) | ||
| 1294 | #define MCF_INTC1_ICR14 MCF_REG08(0xFC04C04E) | ||
| 1295 | #define MCF_INTC1_ICR15 MCF_REG08(0xFC04C04F) | ||
| 1296 | #define MCF_INTC1_ICR16 MCF_REG08(0xFC04C050) | ||
| 1297 | #define MCF_INTC1_ICR17 MCF_REG08(0xFC04C051) | ||
| 1298 | #define MCF_INTC1_ICR18 MCF_REG08(0xFC04C052) | ||
| 1299 | #define MCF_INTC1_ICR19 MCF_REG08(0xFC04C053) | ||
| 1300 | #define MCF_INTC1_ICR20 MCF_REG08(0xFC04C054) | ||
| 1301 | #define MCF_INTC1_ICR21 MCF_REG08(0xFC04C055) | ||
| 1302 | #define MCF_INTC1_ICR22 MCF_REG08(0xFC04C056) | ||
| 1303 | #define MCF_INTC1_ICR23 MCF_REG08(0xFC04C057) | ||
| 1304 | #define MCF_INTC1_ICR24 MCF_REG08(0xFC04C058) | ||
| 1305 | #define MCF_INTC1_ICR25 MCF_REG08(0xFC04C059) | ||
| 1306 | #define MCF_INTC1_ICR26 MCF_REG08(0xFC04C05A) | ||
| 1307 | #define MCF_INTC1_ICR27 MCF_REG08(0xFC04C05B) | ||
| 1308 | #define MCF_INTC1_ICR28 MCF_REG08(0xFC04C05C) | ||
| 1309 | #define MCF_INTC1_ICR29 MCF_REG08(0xFC04C05D) | ||
| 1310 | #define MCF_INTC1_ICR30 MCF_REG08(0xFC04C05E) | ||
| 1311 | #define MCF_INTC1_ICR31 MCF_REG08(0xFC04C05F) | ||
| 1312 | #define MCF_INTC1_ICR32 MCF_REG08(0xFC04C060) | ||
| 1313 | #define MCF_INTC1_ICR33 MCF_REG08(0xFC04C061) | ||
| 1314 | #define MCF_INTC1_ICR34 MCF_REG08(0xFC04C062) | ||
| 1315 | #define MCF_INTC1_ICR35 MCF_REG08(0xFC04C063) | ||
| 1316 | #define MCF_INTC1_ICR36 MCF_REG08(0xFC04C064) | ||
| 1317 | #define MCF_INTC1_ICR37 MCF_REG08(0xFC04C065) | ||
| 1318 | #define MCF_INTC1_ICR38 MCF_REG08(0xFC04C066) | ||
| 1319 | #define MCF_INTC1_ICR39 MCF_REG08(0xFC04C067) | ||
| 1320 | #define MCF_INTC1_ICR40 MCF_REG08(0xFC04C068) | ||
| 1321 | #define MCF_INTC1_ICR41 MCF_REG08(0xFC04C069) | ||
| 1322 | #define MCF_INTC1_ICR42 MCF_REG08(0xFC04C06A) | ||
| 1323 | #define MCF_INTC1_ICR43 MCF_REG08(0xFC04C06B) | ||
| 1324 | #define MCF_INTC1_ICR44 MCF_REG08(0xFC04C06C) | ||
| 1325 | #define MCF_INTC1_ICR45 MCF_REG08(0xFC04C06D) | ||
| 1326 | #define MCF_INTC1_ICR46 MCF_REG08(0xFC04C06E) | ||
| 1327 | #define MCF_INTC1_ICR47 MCF_REG08(0xFC04C06F) | ||
| 1328 | #define MCF_INTC1_ICR48 MCF_REG08(0xFC04C070) | ||
| 1329 | #define MCF_INTC1_ICR49 MCF_REG08(0xFC04C071) | ||
| 1330 | #define MCF_INTC1_ICR50 MCF_REG08(0xFC04C072) | ||
| 1331 | #define MCF_INTC1_ICR51 MCF_REG08(0xFC04C073) | ||
| 1332 | #define MCF_INTC1_ICR52 MCF_REG08(0xFC04C074) | ||
| 1333 | #define MCF_INTC1_ICR53 MCF_REG08(0xFC04C075) | ||
| 1334 | #define MCF_INTC1_ICR54 MCF_REG08(0xFC04C076) | ||
| 1335 | #define MCF_INTC1_ICR55 MCF_REG08(0xFC04C077) | ||
| 1336 | #define MCF_INTC1_ICR56 MCF_REG08(0xFC04C078) | ||
| 1337 | #define MCF_INTC1_ICR57 MCF_REG08(0xFC04C079) | ||
| 1338 | #define MCF_INTC1_ICR58 MCF_REG08(0xFC04C07A) | ||
| 1339 | #define MCF_INTC1_ICR59 MCF_REG08(0xFC04C07B) | ||
| 1340 | #define MCF_INTC1_ICR60 MCF_REG08(0xFC04C07C) | ||
| 1341 | #define MCF_INTC1_ICR61 MCF_REG08(0xFC04C07D) | ||
| 1342 | #define MCF_INTC1_ICR62 MCF_REG08(0xFC04C07E) | ||
| 1343 | #define MCF_INTC1_ICR63 MCF_REG08(0xFC04C07F) | ||
| 1344 | #define MCF_INTC1_ICR(x) MCF_REG08(0xFC04C040+((x)*0x001)) | ||
| 1345 | #define MCF_INTC1_SWIACK MCF_REG08(0xFC04C0E0) | ||
| 1346 | #define MCF_INTC1_L1IACK MCF_REG08(0xFC04C0E4) | ||
| 1347 | #define MCF_INTC1_L2IACK MCF_REG08(0xFC04C0E8) | ||
| 1348 | #define MCF_INTC1_L3IACK MCF_REG08(0xFC04C0EC) | ||
| 1349 | #define MCF_INTC1_L4IACK MCF_REG08(0xFC04C0F0) | ||
| 1350 | #define MCF_INTC1_L5IACK MCF_REG08(0xFC04C0F4) | ||
| 1351 | #define MCF_INTC1_L6IACK MCF_REG08(0xFC04C0F8) | ||
| 1352 | #define MCF_INTC1_L7IACK MCF_REG08(0xFC04C0FC) | ||
| 1353 | #define MCF_INTC1_LIACK(x) MCF_REG08(0xFC04C0E4+((x)*0x004)) | ||
| 1354 | #define MCF_INTC_IPRH(x) MCF_REG32(0xFC048000+((x)*0x4000)) | ||
| 1355 | #define MCF_INTC_IPRL(x) MCF_REG32(0xFC048004+((x)*0x4000)) | ||
| 1356 | #define MCF_INTC_IMRH(x) MCF_REG32(0xFC048008+((x)*0x4000)) | ||
| 1357 | #define MCF_INTC_IMRL(x) MCF_REG32(0xFC04800C+((x)*0x4000)) | ||
| 1358 | #define MCF_INTC_INTFRCH(x) MCF_REG32(0xFC048010+((x)*0x4000)) | ||
| 1359 | #define MCF_INTC_INTFRCL(x) MCF_REG32(0xFC048014+((x)*0x4000)) | ||
| 1360 | #define MCF_INTC_ICONFIG(x) MCF_REG16(0xFC04801A+((x)*0x4000)) | ||
| 1361 | #define MCF_INTC_SIMR(x) MCF_REG08(0xFC04801C+((x)*0x4000)) | ||
| 1362 | #define MCF_INTC_CIMR(x) MCF_REG08(0xFC04801D+((x)*0x4000)) | ||
| 1363 | #define MCF_INTC_CLMASK(x) MCF_REG08(0xFC04801E+((x)*0x4000)) | ||
| 1364 | #define MCF_INTC_SLMASK(x) MCF_REG08(0xFC04801F+((x)*0x4000)) | ||
| 1365 | #define MCF_INTC_ICR0(x) MCF_REG08(0xFC048040+((x)*0x4000)) | ||
| 1366 | #define MCF_INTC_ICR1(x) MCF_REG08(0xFC048041+((x)*0x4000)) | ||
| 1367 | #define MCF_INTC_ICR2(x) MCF_REG08(0xFC048042+((x)*0x4000)) | ||
| 1368 | #define MCF_INTC_ICR3(x) MCF_REG08(0xFC048043+((x)*0x4000)) | ||
| 1369 | #define MCF_INTC_ICR4(x) MCF_REG08(0xFC048044+((x)*0x4000)) | ||
| 1370 | #define MCF_INTC_ICR5(x) MCF_REG08(0xFC048045+((x)*0x4000)) | ||
| 1371 | #define MCF_INTC_ICR6(x) MCF_REG08(0xFC048046+((x)*0x4000)) | ||
| 1372 | #define MCF_INTC_ICR7(x) MCF_REG08(0xFC048047+((x)*0x4000)) | ||
| 1373 | #define MCF_INTC_ICR8(x) MCF_REG08(0xFC048048+((x)*0x4000)) | ||
| 1374 | #define MCF_INTC_ICR9(x) MCF_REG08(0xFC048049+((x)*0x4000)) | ||
| 1375 | #define MCF_INTC_ICR10(x) MCF_REG08(0xFC04804A+((x)*0x4000)) | ||
| 1376 | #define MCF_INTC_ICR11(x) MCF_REG08(0xFC04804B+((x)*0x4000)) | ||
| 1377 | #define MCF_INTC_ICR12(x) MCF_REG08(0xFC04804C+((x)*0x4000)) | ||
| 1378 | #define MCF_INTC_ICR13(x) MCF_REG08(0xFC04804D+((x)*0x4000)) | ||
| 1379 | #define MCF_INTC_ICR14(x) MCF_REG08(0xFC04804E+((x)*0x4000)) | ||
| 1380 | #define MCF_INTC_ICR15(x) MCF_REG08(0xFC04804F+((x)*0x4000)) | ||
| 1381 | #define MCF_INTC_ICR16(x) MCF_REG08(0xFC048050+((x)*0x4000)) | ||
| 1382 | #define MCF_INTC_ICR17(x) MCF_REG08(0xFC048051+((x)*0x4000)) | ||
| 1383 | #define MCF_INTC_ICR18(x) MCF_REG08(0xFC048052+((x)*0x4000)) | ||
| 1384 | #define MCF_INTC_ICR19(x) MCF_REG08(0xFC048053+((x)*0x4000)) | ||
| 1385 | #define MCF_INTC_ICR20(x) MCF_REG08(0xFC048054+((x)*0x4000)) | ||
| 1386 | #define MCF_INTC_ICR21(x) MCF_REG08(0xFC048055+((x)*0x4000)) | ||
| 1387 | #define MCF_INTC_ICR22(x) MCF_REG08(0xFC048056+((x)*0x4000)) | ||
| 1388 | #define MCF_INTC_ICR23(x) MCF_REG08(0xFC048057+((x)*0x4000)) | ||
| 1389 | #define MCF_INTC_ICR24(x) MCF_REG08(0xFC048058+((x)*0x4000)) | ||
| 1390 | #define MCF_INTC_ICR25(x) MCF_REG08(0xFC048059+((x)*0x4000)) | ||
| 1391 | #define MCF_INTC_ICR26(x) MCF_REG08(0xFC04805A+((x)*0x4000)) | ||
| 1392 | #define MCF_INTC_ICR27(x) MCF_REG08(0xFC04805B+((x)*0x4000)) | ||
| 1393 | #define MCF_INTC_ICR28(x) MCF_REG08(0xFC04805C+((x)*0x4000)) | ||
| 1394 | #define MCF_INTC_ICR29(x) MCF_REG08(0xFC04805D+((x)*0x4000)) | ||
| 1395 | #define MCF_INTC_ICR30(x) MCF_REG08(0xFC04805E+((x)*0x4000)) | ||
| 1396 | #define MCF_INTC_ICR31(x) MCF_REG08(0xFC04805F+((x)*0x4000)) | ||
| 1397 | #define MCF_INTC_ICR32(x) MCF_REG08(0xFC048060+((x)*0x4000)) | ||
| 1398 | #define MCF_INTC_ICR33(x) MCF_REG08(0xFC048061+((x)*0x4000)) | ||
| 1399 | #define MCF_INTC_ICR34(x) MCF_REG08(0xFC048062+((x)*0x4000)) | ||
| 1400 | #define MCF_INTC_ICR35(x) MCF_REG08(0xFC048063+((x)*0x4000)) | ||
| 1401 | #define MCF_INTC_ICR36(x) MCF_REG08(0xFC048064+((x)*0x4000)) | ||
| 1402 | #define MCF_INTC_ICR37(x) MCF_REG08(0xFC048065+((x)*0x4000)) | ||
| 1403 | #define MCF_INTC_ICR38(x) MCF_REG08(0xFC048066+((x)*0x4000)) | ||
| 1404 | #define MCF_INTC_ICR39(x) MCF_REG08(0xFC048067+((x)*0x4000)) | ||
| 1405 | #define MCF_INTC_ICR40(x) MCF_REG08(0xFC048068+((x)*0x4000)) | ||
| 1406 | #define MCF_INTC_ICR41(x) MCF_REG08(0xFC048069+((x)*0x4000)) | ||
| 1407 | #define MCF_INTC_ICR42(x) MCF_REG08(0xFC04806A+((x)*0x4000)) | ||
| 1408 | #define MCF_INTC_ICR43(x) MCF_REG08(0xFC04806B+((x)*0x4000)) | ||
| 1409 | #define MCF_INTC_ICR44(x) MCF_REG08(0xFC04806C+((x)*0x4000)) | ||
| 1410 | #define MCF_INTC_ICR45(x) MCF_REG08(0xFC04806D+((x)*0x4000)) | ||
| 1411 | #define MCF_INTC_ICR46(x) MCF_REG08(0xFC04806E+((x)*0x4000)) | ||
| 1412 | #define MCF_INTC_ICR47(x) MCF_REG08(0xFC04806F+((x)*0x4000)) | ||
| 1413 | #define MCF_INTC_ICR48(x) MCF_REG08(0xFC048070+((x)*0x4000)) | ||
| 1414 | #define MCF_INTC_ICR49(x) MCF_REG08(0xFC048071+((x)*0x4000)) | ||
| 1415 | #define MCF_INTC_ICR50(x) MCF_REG08(0xFC048072+((x)*0x4000)) | ||
| 1416 | #define MCF_INTC_ICR51(x) MCF_REG08(0xFC048073+((x)*0x4000)) | ||
| 1417 | #define MCF_INTC_ICR52(x) MCF_REG08(0xFC048074+((x)*0x4000)) | ||
| 1418 | #define MCF_INTC_ICR53(x) MCF_REG08(0xFC048075+((x)*0x4000)) | ||
| 1419 | #define MCF_INTC_ICR54(x) MCF_REG08(0xFC048076+((x)*0x4000)) | ||
| 1420 | #define MCF_INTC_ICR55(x) MCF_REG08(0xFC048077+((x)*0x4000)) | ||
| 1421 | #define MCF_INTC_ICR56(x) MCF_REG08(0xFC048078+((x)*0x4000)) | ||
| 1422 | #define MCF_INTC_ICR57(x) MCF_REG08(0xFC048079+((x)*0x4000)) | ||
| 1423 | #define MCF_INTC_ICR58(x) MCF_REG08(0xFC04807A+((x)*0x4000)) | ||
| 1424 | #define MCF_INTC_ICR59(x) MCF_REG08(0xFC04807B+((x)*0x4000)) | ||
| 1425 | #define MCF_INTC_ICR60(x) MCF_REG08(0xFC04807C+((x)*0x4000)) | ||
| 1426 | #define MCF_INTC_ICR61(x) MCF_REG08(0xFC04807D+((x)*0x4000)) | ||
| 1427 | #define MCF_INTC_ICR62(x) MCF_REG08(0xFC04807E+((x)*0x4000)) | ||
| 1428 | #define MCF_INTC_ICR63(x) MCF_REG08(0xFC04807F+((x)*0x4000)) | ||
| 1429 | #define MCF_INTC_SWIACK(x) MCF_REG08(0xFC0480E0+((x)*0x4000)) | ||
| 1430 | #define MCF_INTC_L1IACK(x) MCF_REG08(0xFC0480E4+((x)*0x4000)) | ||
| 1431 | #define MCF_INTC_L2IACK(x) MCF_REG08(0xFC0480E8+((x)*0x4000)) | ||
| 1432 | #define MCF_INTC_L3IACK(x) MCF_REG08(0xFC0480EC+((x)*0x4000)) | ||
| 1433 | #define MCF_INTC_L4IACK(x) MCF_REG08(0xFC0480F0+((x)*0x4000)) | ||
| 1434 | #define MCF_INTC_L5IACK(x) MCF_REG08(0xFC0480F4+((x)*0x4000)) | ||
| 1435 | #define MCF_INTC_L6IACK(x) MCF_REG08(0xFC0480F8+((x)*0x4000)) | ||
| 1436 | #define MCF_INTC_L7IACK(x) MCF_REG08(0xFC0480FC+((x)*0x4000)) | ||
| 1437 | |||
| 1438 | /* Bit definitions and macros for MCF_INTC_IPRH */ | ||
| 1439 | #define MCF_INTC_IPRH_INT32 (0x00000001) | ||
| 1440 | #define MCF_INTC_IPRH_INT33 (0x00000002) | ||
| 1441 | #define MCF_INTC_IPRH_INT34 (0x00000004) | ||
| 1442 | #define MCF_INTC_IPRH_INT35 (0x00000008) | ||
| 1443 | #define MCF_INTC_IPRH_INT36 (0x00000010) | ||
| 1444 | #define MCF_INTC_IPRH_INT37 (0x00000020) | ||
| 1445 | #define MCF_INTC_IPRH_INT38 (0x00000040) | ||
| 1446 | #define MCF_INTC_IPRH_INT39 (0x00000080) | ||
| 1447 | #define MCF_INTC_IPRH_INT40 (0x00000100) | ||
| 1448 | #define MCF_INTC_IPRH_INT41 (0x00000200) | ||
| 1449 | #define MCF_INTC_IPRH_INT42 (0x00000400) | ||
| 1450 | #define MCF_INTC_IPRH_INT43 (0x00000800) | ||
| 1451 | #define MCF_INTC_IPRH_INT44 (0x00001000) | ||
| 1452 | #define MCF_INTC_IPRH_INT45 (0x00002000) | ||
| 1453 | #define MCF_INTC_IPRH_INT46 (0x00004000) | ||
| 1454 | #define MCF_INTC_IPRH_INT47 (0x00008000) | ||
| 1455 | #define MCF_INTC_IPRH_INT48 (0x00010000) | ||
| 1456 | #define MCF_INTC_IPRH_INT49 (0x00020000) | ||
| 1457 | #define MCF_INTC_IPRH_INT50 (0x00040000) | ||
| 1458 | #define MCF_INTC_IPRH_INT51 (0x00080000) | ||
| 1459 | #define MCF_INTC_IPRH_INT52 (0x00100000) | ||
| 1460 | #define MCF_INTC_IPRH_INT53 (0x00200000) | ||
| 1461 | #define MCF_INTC_IPRH_INT54 (0x00400000) | ||
| 1462 | #define MCF_INTC_IPRH_INT55 (0x00800000) | ||
| 1463 | #define MCF_INTC_IPRH_INT56 (0x01000000) | ||
| 1464 | #define MCF_INTC_IPRH_INT57 (0x02000000) | ||
| 1465 | #define MCF_INTC_IPRH_INT58 (0x04000000) | ||
| 1466 | #define MCF_INTC_IPRH_INT59 (0x08000000) | ||
| 1467 | #define MCF_INTC_IPRH_INT60 (0x10000000) | ||
| 1468 | #define MCF_INTC_IPRH_INT61 (0x20000000) | ||
| 1469 | #define MCF_INTC_IPRH_INT62 (0x40000000) | ||
| 1470 | #define MCF_INTC_IPRH_INT63 (0x80000000) | ||
| 1471 | |||
| 1472 | /* Bit definitions and macros for MCF_INTC_IPRL */ | ||
| 1473 | #define MCF_INTC_IPRL_INT0 (0x00000001) | ||
| 1474 | #define MCF_INTC_IPRL_INT1 (0x00000002) | ||
| 1475 | #define MCF_INTC_IPRL_INT2 (0x00000004) | ||
| 1476 | #define MCF_INTC_IPRL_INT3 (0x00000008) | ||
| 1477 | #define MCF_INTC_IPRL_INT4 (0x00000010) | ||
| 1478 | #define MCF_INTC_IPRL_INT5 (0x00000020) | ||
| 1479 | #define MCF_INTC_IPRL_INT6 (0x00000040) | ||
| 1480 | #define MCF_INTC_IPRL_INT7 (0x00000080) | ||
| 1481 | #define MCF_INTC_IPRL_INT8 (0x00000100) | ||
| 1482 | #define MCF_INTC_IPRL_INT9 (0x00000200) | ||
| 1483 | #define MCF_INTC_IPRL_INT10 (0x00000400) | ||
| 1484 | #define MCF_INTC_IPRL_INT11 (0x00000800) | ||
| 1485 | #define MCF_INTC_IPRL_INT12 (0x00001000) | ||
| 1486 | #define MCF_INTC_IPRL_INT13 (0x00002000) | ||
| 1487 | #define MCF_INTC_IPRL_INT14 (0x00004000) | ||
| 1488 | #define MCF_INTC_IPRL_INT15 (0x00008000) | ||
| 1489 | #define MCF_INTC_IPRL_INT16 (0x00010000) | ||
| 1490 | #define MCF_INTC_IPRL_INT17 (0x00020000) | ||
| 1491 | #define MCF_INTC_IPRL_INT18 (0x00040000) | ||
| 1492 | #define MCF_INTC_IPRL_INT19 (0x00080000) | ||
| 1493 | #define MCF_INTC_IPRL_INT20 (0x00100000) | ||
| 1494 | #define MCF_INTC_IPRL_INT21 (0x00200000) | ||
| 1495 | #define MCF_INTC_IPRL_INT22 (0x00400000) | ||
| 1496 | #define MCF_INTC_IPRL_INT23 (0x00800000) | ||
| 1497 | #define MCF_INTC_IPRL_INT24 (0x01000000) | ||
| 1498 | #define MCF_INTC_IPRL_INT25 (0x02000000) | ||
| 1499 | #define MCF_INTC_IPRL_INT26 (0x04000000) | ||
| 1500 | #define MCF_INTC_IPRL_INT27 (0x08000000) | ||
| 1501 | #define MCF_INTC_IPRL_INT28 (0x10000000) | ||
| 1502 | #define MCF_INTC_IPRL_INT29 (0x20000000) | ||
| 1503 | #define MCF_INTC_IPRL_INT30 (0x40000000) | ||
| 1504 | #define MCF_INTC_IPRL_INT31 (0x80000000) | ||
| 1505 | |||
| 1506 | /* Bit definitions and macros for MCF_INTC_IMRH */ | ||
| 1507 | #define MCF_INTC_IMRH_INT_MASK32 (0x00000001) | ||
| 1508 | #define MCF_INTC_IMRH_INT_MASK33 (0x00000002) | ||
| 1509 | #define MCF_INTC_IMRH_INT_MASK34 (0x00000004) | ||
| 1510 | #define MCF_INTC_IMRH_INT_MASK35 (0x00000008) | ||
| 1511 | #define MCF_INTC_IMRH_INT_MASK36 (0x00000010) | ||
| 1512 | #define MCF_INTC_IMRH_INT_MASK37 (0x00000020) | ||
| 1513 | #define MCF_INTC_IMRH_INT_MASK38 (0x00000040) | ||
| 1514 | #define MCF_INTC_IMRH_INT_MASK39 (0x00000080) | ||
| 1515 | #define MCF_INTC_IMRH_INT_MASK40 (0x00000100) | ||
| 1516 | #define MCF_INTC_IMRH_INT_MASK41 (0x00000200) | ||
| 1517 | #define MCF_INTC_IMRH_INT_MASK42 (0x00000400) | ||
| 1518 | #define MCF_INTC_IMRH_INT_MASK43 (0x00000800) | ||
| 1519 | #define MCF_INTC_IMRH_INT_MASK44 (0x00001000) | ||
| 1520 | #define MCF_INTC_IMRH_INT_MASK45 (0x00002000) | ||
| 1521 | #define MCF_INTC_IMRH_INT_MASK46 (0x00004000) | ||
| 1522 | #define MCF_INTC_IMRH_INT_MASK47 (0x00008000) | ||
| 1523 | #define MCF_INTC_IMRH_INT_MASK48 (0x00010000) | ||
| 1524 | #define MCF_INTC_IMRH_INT_MASK49 (0x00020000) | ||
| 1525 | #define MCF_INTC_IMRH_INT_MASK50 (0x00040000) | ||
| 1526 | #define MCF_INTC_IMRH_INT_MASK51 (0x00080000) | ||
| 1527 | #define MCF_INTC_IMRH_INT_MASK52 (0x00100000) | ||
| 1528 | #define MCF_INTC_IMRH_INT_MASK53 (0x00200000) | ||
| 1529 | #define MCF_INTC_IMRH_INT_MASK54 (0x00400000) | ||
| 1530 | #define MCF_INTC_IMRH_INT_MASK55 (0x00800000) | ||
| 1531 | #define MCF_INTC_IMRH_INT_MASK56 (0x01000000) | ||
| 1532 | #define MCF_INTC_IMRH_INT_MASK57 (0x02000000) | ||
| 1533 | #define MCF_INTC_IMRH_INT_MASK58 (0x04000000) | ||
| 1534 | #define MCF_INTC_IMRH_INT_MASK59 (0x08000000) | ||
| 1535 | #define MCF_INTC_IMRH_INT_MASK60 (0x10000000) | ||
| 1536 | #define MCF_INTC_IMRH_INT_MASK61 (0x20000000) | ||
| 1537 | #define MCF_INTC_IMRH_INT_MASK62 (0x40000000) | ||
| 1538 | #define MCF_INTC_IMRH_INT_MASK63 (0x80000000) | ||
| 1539 | |||
| 1540 | /* Bit definitions and macros for MCF_INTC_IMRL */ | ||
| 1541 | #define MCF_INTC_IMRL_INT_MASK0 (0x00000001) | ||
| 1542 | #define MCF_INTC_IMRL_INT_MASK1 (0x00000002) | ||
| 1543 | #define MCF_INTC_IMRL_INT_MASK2 (0x00000004) | ||
| 1544 | #define MCF_INTC_IMRL_INT_MASK3 (0x00000008) | ||
| 1545 | #define MCF_INTC_IMRL_INT_MASK4 (0x00000010) | ||
| 1546 | #define MCF_INTC_IMRL_INT_MASK5 (0x00000020) | ||
| 1547 | #define MCF_INTC_IMRL_INT_MASK6 (0x00000040) | ||
| 1548 | #define MCF_INTC_IMRL_INT_MASK7 (0x00000080) | ||
| 1549 | #define MCF_INTC_IMRL_INT_MASK8 (0x00000100) | ||
| 1550 | #define MCF_INTC_IMRL_INT_MASK9 (0x00000200) | ||
| 1551 | #define MCF_INTC_IMRL_INT_MASK10 (0x00000400) | ||
| 1552 | #define MCF_INTC_IMRL_INT_MASK11 (0x00000800) | ||
| 1553 | #define MCF_INTC_IMRL_INT_MASK12 (0x00001000) | ||
| 1554 | #define MCF_INTC_IMRL_INT_MASK13 (0x00002000) | ||
| 1555 | #define MCF_INTC_IMRL_INT_MASK14 (0x00004000) | ||
| 1556 | #define MCF_INTC_IMRL_INT_MASK15 (0x00008000) | ||
| 1557 | #define MCF_INTC_IMRL_INT_MASK16 (0x00010000) | ||
| 1558 | #define MCF_INTC_IMRL_INT_MASK17 (0x00020000) | ||
| 1559 | #define MCF_INTC_IMRL_INT_MASK18 (0x00040000) | ||
| 1560 | #define MCF_INTC_IMRL_INT_MASK19 (0x00080000) | ||
| 1561 | #define MCF_INTC_IMRL_INT_MASK20 (0x00100000) | ||
| 1562 | #define MCF_INTC_IMRL_INT_MASK21 (0x00200000) | ||
| 1563 | #define MCF_INTC_IMRL_INT_MASK22 (0x00400000) | ||
| 1564 | #define MCF_INTC_IMRL_INT_MASK23 (0x00800000) | ||
| 1565 | #define MCF_INTC_IMRL_INT_MASK24 (0x01000000) | ||
| 1566 | #define MCF_INTC_IMRL_INT_MASK25 (0x02000000) | ||
| 1567 | #define MCF_INTC_IMRL_INT_MASK26 (0x04000000) | ||
| 1568 | #define MCF_INTC_IMRL_INT_MASK27 (0x08000000) | ||
| 1569 | #define MCF_INTC_IMRL_INT_MASK28 (0x10000000) | ||
| 1570 | #define MCF_INTC_IMRL_INT_MASK29 (0x20000000) | ||
| 1571 | #define MCF_INTC_IMRL_INT_MASK30 (0x40000000) | ||
| 1572 | #define MCF_INTC_IMRL_INT_MASK31 (0x80000000) | ||
| 1573 | |||
| 1574 | /* Bit definitions and macros for MCF_INTC_INTFRCH */ | ||
| 1575 | #define MCF_INTC_INTFRCH_INTFRC32 (0x00000001) | ||
| 1576 | #define MCF_INTC_INTFRCH_INTFRC33 (0x00000002) | ||
| 1577 | #define MCF_INTC_INTFRCH_INTFRC34 (0x00000004) | ||
| 1578 | #define MCF_INTC_INTFRCH_INTFRC35 (0x00000008) | ||
| 1579 | #define MCF_INTC_INTFRCH_INTFRC36 (0x00000010) | ||
| 1580 | #define MCF_INTC_INTFRCH_INTFRC37 (0x00000020) | ||
| 1581 | #define MCF_INTC_INTFRCH_INTFRC38 (0x00000040) | ||
| 1582 | #define MCF_INTC_INTFRCH_INTFRC39 (0x00000080) | ||
| 1583 | #define MCF_INTC_INTFRCH_INTFRC40 (0x00000100) | ||
| 1584 | #define MCF_INTC_INTFRCH_INTFRC41 (0x00000200) | ||
| 1585 | #define MCF_INTC_INTFRCH_INTFRC42 (0x00000400) | ||
| 1586 | #define MCF_INTC_INTFRCH_INTFRC43 (0x00000800) | ||
| 1587 | #define MCF_INTC_INTFRCH_INTFRC44 (0x00001000) | ||
| 1588 | #define MCF_INTC_INTFRCH_INTFRC45 (0x00002000) | ||
| 1589 | #define MCF_INTC_INTFRCH_INTFRC46 (0x00004000) | ||
| 1590 | #define MCF_INTC_INTFRCH_INTFRC47 (0x00008000) | ||
| 1591 | #define MCF_INTC_INTFRCH_INTFRC48 (0x00010000) | ||
| 1592 | #define MCF_INTC_INTFRCH_INTFRC49 (0x00020000) | ||
| 1593 | #define MCF_INTC_INTFRCH_INTFRC50 (0x00040000) | ||
| 1594 | #define MCF_INTC_INTFRCH_INTFRC51 (0x00080000) | ||
| 1595 | #define MCF_INTC_INTFRCH_INTFRC52 (0x00100000) | ||
| 1596 | #define MCF_INTC_INTFRCH_INTFRC53 (0x00200000) | ||
| 1597 | #define MCF_INTC_INTFRCH_INTFRC54 (0x00400000) | ||
| 1598 | #define MCF_INTC_INTFRCH_INTFRC55 (0x00800000) | ||
| 1599 | #define MCF_INTC_INTFRCH_INTFRC56 (0x01000000) | ||
| 1600 | #define MCF_INTC_INTFRCH_INTFRC57 (0x02000000) | ||
| 1601 | #define MCF_INTC_INTFRCH_INTFRC58 (0x04000000) | ||
| 1602 | #define MCF_INTC_INTFRCH_INTFRC59 (0x08000000) | ||
| 1603 | #define MCF_INTC_INTFRCH_INTFRC60 (0x10000000) | ||
| 1604 | #define MCF_INTC_INTFRCH_INTFRC61 (0x20000000) | ||
| 1605 | #define MCF_INTC_INTFRCH_INTFRC62 (0x40000000) | ||
| 1606 | #define MCF_INTC_INTFRCH_INTFRC63 (0x80000000) | ||
| 1607 | |||
| 1608 | /* Bit definitions and macros for MCF_INTC_INTFRCL */ | ||
| 1609 | #define MCF_INTC_INTFRCL_INTFRC0 (0x00000001) | ||
| 1610 | #define MCF_INTC_INTFRCL_INTFRC1 (0x00000002) | ||
| 1611 | #define MCF_INTC_INTFRCL_INTFRC2 (0x00000004) | ||
| 1612 | #define MCF_INTC_INTFRCL_INTFRC3 (0x00000008) | ||
| 1613 | #define MCF_INTC_INTFRCL_INTFRC4 (0x00000010) | ||
| 1614 | #define MCF_INTC_INTFRCL_INTFRC5 (0x00000020) | ||
| 1615 | #define MCF_INTC_INTFRCL_INTFRC6 (0x00000040) | ||
| 1616 | #define MCF_INTC_INTFRCL_INTFRC7 (0x00000080) | ||
| 1617 | #define MCF_INTC_INTFRCL_INTFRC8 (0x00000100) | ||
| 1618 | #define MCF_INTC_INTFRCL_INTFRC9 (0x00000200) | ||
| 1619 | #define MCF_INTC_INTFRCL_INTFRC10 (0x00000400) | ||
| 1620 | #define MCF_INTC_INTFRCL_INTFRC11 (0x00000800) | ||
| 1621 | #define MCF_INTC_INTFRCL_INTFRC12 (0x00001000) | ||
| 1622 | #define MCF_INTC_INTFRCL_INTFRC13 (0x00002000) | ||
| 1623 | #define MCF_INTC_INTFRCL_INTFRC14 (0x00004000) | ||
| 1624 | #define MCF_INTC_INTFRCL_INTFRC15 (0x00008000) | ||
| 1625 | #define MCF_INTC_INTFRCL_INTFRC16 (0x00010000) | ||
| 1626 | #define MCF_INTC_INTFRCL_INTFRC17 (0x00020000) | ||
| 1627 | #define MCF_INTC_INTFRCL_INTFRC18 (0x00040000) | ||
| 1628 | #define MCF_INTC_INTFRCL_INTFRC19 (0x00080000) | ||
| 1629 | #define MCF_INTC_INTFRCL_INTFRC20 (0x00100000) | ||
| 1630 | #define MCF_INTC_INTFRCL_INTFRC21 (0x00200000) | ||
| 1631 | #define MCF_INTC_INTFRCL_INTFRC22 (0x00400000) | ||
| 1632 | #define MCF_INTC_INTFRCL_INTFRC23 (0x00800000) | ||
| 1633 | #define MCF_INTC_INTFRCL_INTFRC24 (0x01000000) | ||
| 1634 | #define MCF_INTC_INTFRCL_INTFRC25 (0x02000000) | ||
| 1635 | #define MCF_INTC_INTFRCL_INTFRC26 (0x04000000) | ||
| 1636 | #define MCF_INTC_INTFRCL_INTFRC27 (0x08000000) | ||
| 1637 | #define MCF_INTC_INTFRCL_INTFRC28 (0x10000000) | ||
| 1638 | #define MCF_INTC_INTFRCL_INTFRC29 (0x20000000) | ||
| 1639 | #define MCF_INTC_INTFRCL_INTFRC30 (0x40000000) | ||
| 1640 | #define MCF_INTC_INTFRCL_INTFRC31 (0x80000000) | ||
| 1641 | |||
| 1642 | /* Bit definitions and macros for MCF_INTC_ICONFIG */ | ||
| 1643 | #define MCF_INTC_ICONFIG_EMASK (0x0020) | ||
| 1644 | #define MCF_INTC_ICONFIG_ELVLPRI1 (0x0200) | ||
| 1645 | #define MCF_INTC_ICONFIG_ELVLPRI2 (0x0400) | ||
| 1646 | #define MCF_INTC_ICONFIG_ELVLPRI3 (0x0800) | ||
| 1647 | #define MCF_INTC_ICONFIG_ELVLPRI4 (0x1000) | ||
| 1648 | #define MCF_INTC_ICONFIG_ELVLPRI5 (0x2000) | ||
| 1649 | #define MCF_INTC_ICONFIG_ELVLPRI6 (0x4000) | ||
| 1650 | #define MCF_INTC_ICONFIG_ELVLPRI7 (0x8000) | ||
| 1651 | |||
| 1652 | /* Bit definitions and macros for MCF_INTC_SIMR */ | ||
| 1653 | #define MCF_INTC_SIMR_SIMR(x) (((x)&0x7F)<<0) | ||
| 1654 | |||
| 1655 | /* Bit definitions and macros for MCF_INTC_CIMR */ | ||
| 1656 | #define MCF_INTC_CIMR_CIMR(x) (((x)&0x7F)<<0) | ||
| 1657 | |||
| 1658 | /* Bit definitions and macros for MCF_INTC_CLMASK */ | ||
| 1659 | #define MCF_INTC_CLMASK_CLMASK(x) (((x)&0x0F)<<0) | ||
| 1660 | |||
| 1661 | /* Bit definitions and macros for MCF_INTC_SLMASK */ | ||
| 1662 | #define MCF_INTC_SLMASK_SLMASK(x) (((x)&0x0F)<<0) | ||
| 1663 | |||
| 1664 | /* Bit definitions and macros for MCF_INTC_ICR */ | ||
| 1665 | #define MCF_INTC_ICR_IL(x) (((x)&0x07)<<0) | ||
| 1666 | |||
| 1667 | /* Bit definitions and macros for MCF_INTC_SWIACK */ | ||
| 1668 | #define MCF_INTC_SWIACK_VECTOR(x) (((x)&0xFF)<<0) | ||
| 1669 | |||
| 1670 | /* Bit definitions and macros for MCF_INTC_LIACK */ | ||
| 1671 | #define MCF_INTC_LIACK_VECTOR(x) (((x)&0xFF)<<0) | ||
| 1672 | |||
| 1673 | /********************************************************************/ | ||
| 1674 | /********************************************************************* | ||
| 1675 | * | ||
| 1676 | * LCD Controller (LCDC) | ||
| 1677 | * | ||
| 1678 | *********************************************************************/ | ||
| 1679 | |||
| 1680 | /* Register read/write macros */ | ||
| 1681 | #define MCF_LCDC_LSSAR MCF_REG32(0xFC0AC000) | ||
| 1682 | #define MCF_LCDC_LSR MCF_REG32(0xFC0AC004) | ||
| 1683 | #define MCF_LCDC_LVPWR MCF_REG32(0xFC0AC008) | ||
| 1684 | #define MCF_LCDC_LCPR MCF_REG32(0xFC0AC00C) | ||
| 1685 | #define MCF_LCDC_LCWHBR MCF_REG32(0xFC0AC010) | ||
| 1686 | #define MCF_LCDC_LCCMR MCF_REG32(0xFC0AC014) | ||
| 1687 | #define MCF_LCDC_LPCR MCF_REG32(0xFC0AC018) | ||
| 1688 | #define MCF_LCDC_LHCR MCF_REG32(0xFC0AC01C) | ||
| 1689 | #define MCF_LCDC_LVCR MCF_REG32(0xFC0AC020) | ||
| 1690 | #define MCF_LCDC_LPOR MCF_REG32(0xFC0AC024) | ||
| 1691 | #define MCF_LCDC_LSCR MCF_REG32(0xFC0AC028) | ||
| 1692 | #define MCF_LCDC_LPCCR MCF_REG32(0xFC0AC02C) | ||
| 1693 | #define MCF_LCDC_LDCR MCF_REG32(0xFC0AC030) | ||
| 1694 | #define MCF_LCDC_LRMCR MCF_REG32(0xFC0AC034) | ||
| 1695 | #define MCF_LCDC_LICR MCF_REG32(0xFC0AC038) | ||
| 1696 | #define MCF_LCDC_LIER MCF_REG32(0xFC0AC03C) | ||
| 1697 | #define MCF_LCDC_LISR MCF_REG32(0xFC0AC040) | ||
| 1698 | #define MCF_LCDC_LGWSAR MCF_REG32(0xFC0AC050) | ||
| 1699 | #define MCF_LCDC_LGWSR MCF_REG32(0xFC0AC054) | ||
| 1700 | #define MCF_LCDC_LGWVPWR MCF_REG32(0xFC0AC058) | ||
| 1701 | #define MCF_LCDC_LGWPOR MCF_REG32(0xFC0AC05C) | ||
| 1702 | #define MCF_LCDC_LGWPR MCF_REG32(0xFC0AC060) | ||
| 1703 | #define MCF_LCDC_LGWCR MCF_REG32(0xFC0AC064) | ||
| 1704 | #define MCF_LCDC_LGWDCR MCF_REG32(0xFC0AC068) | ||
| 1705 | #define MCF_LCDC_BPLUT_BASE MCF_REG32(0xFC0AC800) | ||
| 1706 | #define MCF_LCDC_GWLUT_BASE MCF_REG32(0xFC0ACC00) | ||
| 1707 | |||
| 1708 | /* Bit definitions and macros for MCF_LCDC_LSSAR */ | ||
| 1709 | #define MCF_LCDC_LSSAR_SSA(x) (((x)&0x3FFFFFFF)<<2) | ||
| 1710 | |||
| 1711 | /* Bit definitions and macros for MCF_LCDC_LSR */ | ||
| 1712 | #define MCF_LCDC_LSR_YMAX(x) (((x)&0x000003FF)<<0) | ||
| 1713 | #define MCF_LCDC_LSR_XMAX(x) (((x)&0x0000003F)<<20) | ||
| 1714 | |||
| 1715 | /* Bit definitions and macros for MCF_LCDC_LVPWR */ | ||
| 1716 | #define MCF_LCDC_LVPWR_VPW(x) (((x)&0x000003FF)<<0) | ||
| 1717 | |||
| 1718 | /* Bit definitions and macros for MCF_LCDC_LCPR */ | ||
| 1719 | #define MCF_LCDC_LCPR_CYP(x) (((x)&0x000003FF)<<0) | ||
| 1720 | #define MCF_LCDC_LCPR_CXP(x) (((x)&0x000003FF)<<16) | ||
| 1721 | #define MCF_LCDC_LCPR_OP (0x10000000) | ||
| 1722 | #define MCF_LCDC_LCPR_CC(x) (((x)&0x00000003)<<30) | ||
| 1723 | #define MCF_LCDC_LCPR_CC_TRANSPARENT (0x00000000) | ||
| 1724 | #define MCF_LCDC_LCPR_CC_OR (0x40000000) | ||
| 1725 | #define MCF_LCDC_LCPR_CC_XOR (0x80000000) | ||
| 1726 | #define MCF_LCDC_LCPR_CC_AND (0xC0000000) | ||
| 1727 | #define MCF_LCDC_LCPR_OP_ON (0x10000000) | ||
| 1728 | #define MCF_LCDC_LCPR_OP_OFF (0x00000000) | ||
| 1729 | |||
| 1730 | /* Bit definitions and macros for MCF_LCDC_LCWHBR */ | ||
| 1731 | #define MCF_LCDC_LCWHBR_BD(x) (((x)&0x000000FF)<<0) | ||
| 1732 | #define MCF_LCDC_LCWHBR_CH(x) (((x)&0x0000001F)<<16) | ||
| 1733 | #define MCF_LCDC_LCWHBR_CW(x) (((x)&0x0000001F)<<24) | ||
| 1734 | #define MCF_LCDC_LCWHBR_BK_EN (0x80000000) | ||
| 1735 | #define MCF_LCDC_LCWHBR_BK_EN_ON (0x80000000) | ||
| 1736 | #define MCF_LCDC_LCWHBR_BK_EN_OFF (0x00000000) | ||
| 1737 | |||
| 1738 | /* Bit definitions and macros for MCF_LCDC_LCCMR */ | ||
| 1739 | #define MCF_LCDC_LCCMR_CUR_COL_B(x) (((x)&0x0000003F)<<0) | ||
| 1740 | #define MCF_LCDC_LCCMR_CUR_COL_G(x) (((x)&0x0000003F)<<6) | ||
| 1741 | #define MCF_LCDC_LCCMR_CUR_COL_R(x) (((x)&0x0000003F)<<12) | ||
| 1742 | |||
| 1743 | /* Bit definitions and macros for MCF_LCDC_LPCR */ | ||
| 1744 | #define MCF_LCDC_LPCR_PCD(x) (((x)&0x0000003F)<<0) | ||
| 1745 | #define MCF_LCDC_LPCR_SHARP (0x00000040) | ||
| 1746 | #define MCF_LCDC_LPCR_SCLKSEL (0x00000080) | ||
| 1747 | #define MCF_LCDC_LPCR_ACD(x) (((x)&0x0000007F)<<8) | ||
| 1748 | #define MCF_LCDC_LPCR_ACDSEL (0x00008000) | ||
| 1749 | #define MCF_LCDC_LPCR_REV_VS (0x00010000) | ||
| 1750 | #define MCF_LCDC_LPCR_SWAP_SEL (0x00020000) | ||
| 1751 | #define MCF_LCDC_LPCR_ENDSEL (0x00040000) | ||
| 1752 | #define MCF_LCDC_LPCR_SCLKIDLE (0x00080000) | ||
| 1753 | #define MCF_LCDC_LPCR_OEPOL (0x00100000) | ||
| 1754 | #define MCF_LCDC_LPCR_CLKPOL (0x00200000) | ||
| 1755 | #define MCF_LCDC_LPCR_LPPOL (0x00400000) | ||
| 1756 | #define MCF_LCDC_LPCR_FLM (0x00800000) | ||
| 1757 | #define MCF_LCDC_LPCR_PIXPOL (0x01000000) | ||
| 1758 | #define MCF_LCDC_LPCR_BPIX(x) (((x)&0x00000007)<<25) | ||
| 1759 | #define MCF_LCDC_LPCR_PBSIZ(x) (((x)&0x00000003)<<28) | ||
| 1760 | #define MCF_LCDC_LPCR_COLOR (0x40000000) | ||
| 1761 | #define MCF_LCDC_LPCR_TFT (0x80000000) | ||
| 1762 | #define MCF_LCDC_LPCR_MODE_MONOCGROME (0x00000000) | ||
| 1763 | #define MCF_LCDC_LPCR_MODE_CSTN (0x40000000) | ||
| 1764 | #define MCF_LCDC_LPCR_MODE_TFT (0xC0000000) | ||
| 1765 | #define MCF_LCDC_LPCR_PBSIZ_1 (0x00000000) | ||
| 1766 | #define MCF_LCDC_LPCR_PBSIZ_2 (0x10000000) | ||
| 1767 | #define MCF_LCDC_LPCR_PBSIZ_4 (0x20000000) | ||
| 1768 | #define MCF_LCDC_LPCR_PBSIZ_8 (0x30000000) | ||
| 1769 | #define MCF_LCDC_LPCR_BPIX_1bpp (0x00000000) | ||
| 1770 | #define MCF_LCDC_LPCR_BPIX_2bpp (0x02000000) | ||
| 1771 | #define MCF_LCDC_LPCR_BPIX_4bpp (0x04000000) | ||
| 1772 | #define MCF_LCDC_LPCR_BPIX_8bpp (0x06000000) | ||
| 1773 | #define MCF_LCDC_LPCR_BPIX_12bpp (0x08000000) | ||
| 1774 | #define MCF_LCDC_LPCR_BPIX_16bpp (0x0A000000) | ||
| 1775 | #define MCF_LCDC_LPCR_BPIX_18bpp (0x0C000000) | ||
| 1776 | |||
| 1777 | #define MCF_LCDC_LPCR_PANEL_TYPE(x) (((x)&0x00000003)<<30) | ||
| 1778 | |||
| 1779 | /* Bit definitions and macros for MCF_LCDC_LHCR */ | ||
| 1780 | #define MCF_LCDC_LHCR_H_WAIT_2(x) (((x)&0x000000FF)<<0) | ||
| 1781 | #define MCF_LCDC_LHCR_H_WAIT_1(x) (((x)&0x000000FF)<<8) | ||
| 1782 | #define MCF_LCDC_LHCR_H_WIDTH(x) (((x)&0x0000003F)<<26) | ||
| 1783 | |||
| 1784 | /* Bit definitions and macros for MCF_LCDC_LVCR */ | ||
| 1785 | #define MCF_LCDC_LVCR_V_WAIT_2(x) (((x)&0x000000FF)<<0) | ||
| 1786 | #define MCF_LCDC_LVCR_V_WAIT_1(x) (((x)&0x000000FF)<<8) | ||
| 1787 | #define MCF_LCDC_LVCR_V_WIDTH(x) (((x)&0x0000003F)<<26) | ||
| 1788 | |||
| 1789 | /* Bit definitions and macros for MCF_LCDC_LPOR */ | ||
| 1790 | #define MCF_LCDC_LPOR_POS(x) (((x)&0x0000001F)<<0) | ||
| 1791 | |||
| 1792 | /* Bit definitions and macros for MCF_LCDC_LPCCR */ | ||
| 1793 | #define MCF_LCDC_LPCCR_PW(x) (((x)&0x000000FF)<<0) | ||
| 1794 | #define MCF_LCDC_LPCCR_CC_EN (0x00000100) | ||
| 1795 | #define MCF_LCDC_LPCCR_SCR(x) (((x)&0x00000003)<<9) | ||
| 1796 | #define MCF_LCDC_LPCCR_LDMSK (0x00008000) | ||
| 1797 | #define MCF_LCDC_LPCCR_CLS_HI_WIDTH(x) (((x)&0x000001FF)<<16) | ||
| 1798 | #define MCF_LCDC_LPCCR_SCR_LINEPULSE (0x00000000) | ||
| 1799 | #define MCF_LCDC_LPCCR_SCR_PIXELCLK (0x00002000) | ||
| 1800 | #define MCF_LCDC_LPCCR_SCR_LCDCLOCK (0x00004000) | ||
| 1801 | |||
| 1802 | /* Bit definitions and macros for MCF_LCDC_LDCR */ | ||
| 1803 | #define MCF_LCDC_LDCR_TM(x) (((x)&0x0000001F)<<0) | ||
| 1804 | #define MCF_LCDC_LDCR_HM(x) (((x)&0x0000001F)<<16) | ||
| 1805 | #define MCF_LCDC_LDCR_BURST (0x80000000) | ||
| 1806 | |||
| 1807 | /* Bit definitions and macros for MCF_LCDC_LRMCR */ | ||
| 1808 | #define MCF_LCDC_LRMCR_SEL_REF (0x00000001) | ||
| 1809 | |||
| 1810 | /* Bit definitions and macros for MCF_LCDC_LICR */ | ||
| 1811 | #define MCF_LCDC_LICR_INTCON (0x00000001) | ||
| 1812 | #define MCF_LCDC_LICR_INTSYN (0x00000004) | ||
| 1813 | #define MCF_LCDC_LICR_GW_INT_CON (0x00000010) | ||
| 1814 | |||
| 1815 | /* Bit definitions and macros for MCF_LCDC_LIER */ | ||
| 1816 | #define MCF_LCDC_LIER_BOF_EN (0x00000001) | ||
| 1817 | #define MCF_LCDC_LIER_EOF_EN (0x00000002) | ||
| 1818 | #define MCF_LCDC_LIER_ERR_RES_EN (0x00000004) | ||
| 1819 | #define MCF_LCDC_LIER_UDR_ERR_EN (0x00000008) | ||
| 1820 | #define MCF_LCDC_LIER_GW_BOF_EN (0x00000010) | ||
| 1821 | #define MCF_LCDC_LIER_GW_EOF_EN (0x00000020) | ||
| 1822 | #define MCF_LCDC_LIER_GW_ERR_RES_EN (0x00000040) | ||
| 1823 | #define MCF_LCDC_LIER_GW_UDR_ERR_EN (0x00000080) | ||
| 1824 | |||
| 1825 | /* Bit definitions and macros for MCF_LCDC_LISR */ | ||
| 1826 | #define MCF_LCDC_LISR_BOF (0x00000001) | ||
| 1827 | #define MCF_LCDC_LISR_EOF (0x00000002) | ||
| 1828 | #define MCF_LCDC_LISR_ERR_RES (0x00000004) | ||
| 1829 | #define MCF_LCDC_LISR_UDR_ERR (0x00000008) | ||
| 1830 | #define MCF_LCDC_LISR_GW_BOF (0x00000010) | ||
| 1831 | #define MCF_LCDC_LISR_GW_EOF (0x00000020) | ||
| 1832 | #define MCF_LCDC_LISR_GW_ERR_RES (0x00000040) | ||
| 1833 | #define MCF_LCDC_LISR_GW_UDR_ERR (0x00000080) | ||
| 1834 | |||
| 1835 | /* Bit definitions and macros for MCF_LCDC_LGWSAR */ | ||
| 1836 | #define MCF_LCDC_LGWSAR_GWSA(x) (((x)&0x3FFFFFFF)<<2) | ||
| 1837 | |||
| 1838 | /* Bit definitions and macros for MCF_LCDC_LGWSR */ | ||
| 1839 | #define MCF_LCDC_LGWSR_GWH(x) (((x)&0x000003FF)<<0) | ||
| 1840 | #define MCF_LCDC_LGWSR_GWW(x) (((x)&0x0000003F)<<20) | ||
| 1841 | |||
| 1842 | /* Bit definitions and macros for MCF_LCDC_LGWVPWR */ | ||
| 1843 | #define MCF_LCDC_LGWVPWR_GWVPW(x) (((x)&0x000003FF)<<0) | ||
| 1844 | |||
| 1845 | /* Bit definitions and macros for MCF_LCDC_LGWPOR */ | ||
| 1846 | #define MCF_LCDC_LGWPOR_GWPO(x) (((x)&0x0000001F)<<0) | ||
| 1847 | |||
| 1848 | /* Bit definitions and macros for MCF_LCDC_LGWPR */ | ||
| 1849 | #define MCF_LCDC_LGWPR_GWYP(x) (((x)&0x000003FF)<<0) | ||
| 1850 | #define MCF_LCDC_LGWPR_GWXP(x) (((x)&0x000003FF)<<16) | ||
| 1851 | |||
| 1852 | /* Bit definitions and macros for MCF_LCDC_LGWCR */ | ||
| 1853 | #define MCF_LCDC_LGWCR_GWCKB(x) (((x)&0x0000003F)<<0) | ||
| 1854 | #define MCF_LCDC_LGWCR_GWCKG(x) (((x)&0x0000003F)<<6) | ||
| 1855 | #define MCF_LCDC_LGWCR_GWCKR(x) (((x)&0x0000003F)<<12) | ||
| 1856 | #define MCF_LCDC_LGWCR_GW_RVS (0x00200000) | ||
| 1857 | #define MCF_LCDC_LGWCR_GWE (0x00400000) | ||
| 1858 | #define MCF_LCDC_LGWCR_GWCKE (0x00800000) | ||
| 1859 | #define MCF_LCDC_LGWCR_GWAV(x) (((x)&0x000000FF)<<24) | ||
| 1860 | |||
| 1861 | /* Bit definitions and macros for MCF_LCDC_LGWDCR */ | ||
| 1862 | #define MCF_LCDC_LGWDCR_GWTM(x) (((x)&0x0000001F)<<0) | ||
| 1863 | #define MCF_LCDC_LGWDCR_GWHM(x) (((x)&0x0000001F)<<16) | ||
| 1864 | #define MCF_LCDC_LGWDCR_GWBT (0x80000000) | ||
| 1865 | |||
| 1866 | /* Bit definitions and macros for MCF_LCDC_LSCR */ | ||
| 1867 | #define MCF_LCDC_LSCR_PS_RISE_DELAY(x) (((x)&0x0000003F)<<26) | ||
| 1868 | #define MCF_LCDC_LSCR_CLS_RISE_DELAY(x) (((x)&0x000000FF)<<16) | ||
| 1869 | #define MCF_LCDC_LSCR_REV_TOGGLE_DELAY(x) (((x)&0x0000000F)<<8) | ||
| 1870 | #define MCF_LCDC_LSCR_GRAY_2(x) (((x)&0x0000000F)<<4) | ||
| 1871 | #define MCF_LCDC_LSCR_GRAY_1(x) (((x)&0x0000000F)<<0) | ||
| 1872 | |||
| 1873 | /* Bit definitions and macros for MCF_LCDC_BPLUT_BASE */ | ||
| 1874 | #define MCF_LCDC_BPLUT_BASE_BASE(x) (((x)&0xFFFFFFFF)<<0) | ||
| 1875 | |||
| 1876 | /* Bit definitions and macros for MCF_LCDC_GWLUT_BASE */ | ||
| 1877 | #define MCF_LCDC_GWLUT_BASE_BASE(x) (((x)&0xFFFFFFFF)<<0) | ||
| 1878 | |||
| 1879 | /********************************************************************* | ||
| 1880 | * | ||
| 1881 | * Phase Locked Loop (PLL) | ||
| 1882 | * | ||
| 1883 | *********************************************************************/ | ||
| 1884 | |||
| 1885 | /* Register read/write macros */ | ||
| 1886 | #define MCF_PLL_PODR MCF_REG08(0xFC0C0000) | ||
| 1887 | #define MCF_PLL_PLLCR MCF_REG08(0xFC0C0004) | ||
| 1888 | #define MCF_PLL_PMDR MCF_REG08(0xFC0C0008) | ||
| 1889 | #define MCF_PLL_PFDR MCF_REG08(0xFC0C000C) | ||
| 1890 | |||
| 1891 | /* Bit definitions and macros for MCF_PLL_PODR */ | ||
| 1892 | #define MCF_PLL_PODR_BUSDIV(x) (((x)&0x0F)<<0) | ||
| 1893 | #define MCF_PLL_PODR_CPUDIV(x) (((x)&0x0F)<<4) | ||
| 1894 | |||
| 1895 | /* Bit definitions and macros for MCF_PLL_PLLCR */ | ||
| 1896 | #define MCF_PLL_PLLCR_DITHDEV(x) (((x)&0x07)<<0) | ||
| 1897 | #define MCF_PLL_PLLCR_DITHEN (0x80) | ||
| 1898 | |||
| 1899 | /* Bit definitions and macros for MCF_PLL_PMDR */ | ||
| 1900 | #define MCF_PLL_PMDR_MODDIV(x) (((x)&0xFF)<<0) | ||
| 1901 | |||
| 1902 | /* Bit definitions and macros for MCF_PLL_PFDR */ | ||
| 1903 | #define MCF_PLL_PFDR_MFD(x) (((x)&0xFF)<<0) | ||
| 1904 | |||
| 1905 | /********************************************************************* | ||
| 1906 | * | ||
| 1907 | * System Control Module Registers (SCM) | ||
| 1908 | * | ||
| 1909 | *********************************************************************/ | ||
| 1910 | |||
| 1911 | /* Register read/write macros */ | ||
| 1912 | #define MCF_SCM_MPR MCF_REG32(0xFC000000) | ||
| 1913 | #define MCF_SCM_PACRA MCF_REG32(0xFC000020) | ||
| 1914 | #define MCF_SCM_PACRB MCF_REG32(0xFC000024) | ||
| 1915 | #define MCF_SCM_PACRC MCF_REG32(0xFC000028) | ||
| 1916 | #define MCF_SCM_PACRD MCF_REG32(0xFC00002C) | ||
| 1917 | #define MCF_SCM_PACRE MCF_REG32(0xFC000040) | ||
| 1918 | #define MCF_SCM_PACRF MCF_REG32(0xFC000044) | ||
| 1919 | |||
| 1920 | #define MCF_SCM_BCR MCF_REG32(0xFC040024) | ||
| 1921 | |||
| 1922 | /********************************************************************* | ||
| 1923 | * | ||
| 1924 | * SDRAM Controller (SDRAMC) | ||
| 1925 | * | ||
| 1926 | *********************************************************************/ | ||
| 1927 | |||
| 1928 | /* Register read/write macros */ | ||
| 1929 | #define MCF_SDRAMC_SDMR MCF_REG32(0xFC0B8000) | ||
| 1930 | #define MCF_SDRAMC_SDCR MCF_REG32(0xFC0B8004) | ||
| 1931 | #define MCF_SDRAMC_SDCFG1 MCF_REG32(0xFC0B8008) | ||
| 1932 | #define MCF_SDRAMC_SDCFG2 MCF_REG32(0xFC0B800C) | ||
| 1933 | #define MCF_SDRAMC_LIMP_FIX MCF_REG32(0xFC0B8080) | ||
| 1934 | #define MCF_SDRAMC_SDDS MCF_REG32(0xFC0B8100) | ||
| 1935 | #define MCF_SDRAMC_SDCS0 MCF_REG32(0xFC0B8110) | ||
| 1936 | #define MCF_SDRAMC_SDCS1 MCF_REG32(0xFC0B8114) | ||
| 1937 | #define MCF_SDRAMC_SDCS2 MCF_REG32(0xFC0B8118) | ||
| 1938 | #define MCF_SDRAMC_SDCS3 MCF_REG32(0xFC0B811C) | ||
| 1939 | #define MCF_SDRAMC_SDCS(x) MCF_REG32(0xFC0B8110+((x)*0x004)) | ||
| 1940 | |||
| 1941 | /* Bit definitions and macros for MCF_SDRAMC_SDMR */ | ||
| 1942 | #define MCF_SDRAMC_SDMR_CMD (0x00010000) | ||
| 1943 | #define MCF_SDRAMC_SDMR_AD(x) (((x)&0x00000FFF)<<18) | ||
| 1944 | #define MCF_SDRAMC_SDMR_BNKAD(x) (((x)&0x00000003)<<30) | ||
| 1945 | #define MCF_SDRAMC_SDMR_BNKAD_LMR (0x00000000) | ||
| 1946 | #define MCF_SDRAMC_SDMR_BNKAD_LEMR (0x40000000) | ||
| 1947 | |||
| 1948 | /* Bit definitions and macros for MCF_SDRAMC_SDCR */ | ||
| 1949 | #define MCF_SDRAMC_SDCR_IPALL (0x00000002) | ||
| 1950 | #define MCF_SDRAMC_SDCR_IREF (0x00000004) | ||
| 1951 | #define MCF_SDRAMC_SDCR_DQS_OE(x) (((x)&0x0000000F)<<8) | ||
| 1952 | #define MCF_SDRAMC_SDCR_PS(x) (((x)&0x00000003)<<12) | ||
| 1953 | #define MCF_SDRAMC_SDCR_RCNT(x) (((x)&0x0000003F)<<16) | ||
| 1954 | #define MCF_SDRAMC_SDCR_OE_RULE (0x00400000) | ||
| 1955 | #define MCF_SDRAMC_SDCR_MUX(x) (((x)&0x00000003)<<24) | ||
| 1956 | #define MCF_SDRAMC_SDCR_REF (0x10000000) | ||
| 1957 | #define MCF_SDRAMC_SDCR_DDR (0x20000000) | ||
| 1958 | #define MCF_SDRAMC_SDCR_CKE (0x40000000) | ||
| 1959 | #define MCF_SDRAMC_SDCR_MODE_EN (0x80000000) | ||
| 1960 | #define MCF_SDRAMC_SDCR_PS_16 (0x00002000) | ||
| 1961 | #define MCF_SDRAMC_SDCR_PS_32 (0x00000000) | ||
| 1962 | |||
| 1963 | /* Bit definitions and macros for MCF_SDRAMC_SDCFG1 */ | ||
| 1964 | #define MCF_SDRAMC_SDCFG1_WTLAT(x) (((x)&0x00000007)<<4) | ||
| 1965 | #define MCF_SDRAMC_SDCFG1_REF2ACT(x) (((x)&0x0000000F)<<8) | ||
| 1966 | #define MCF_SDRAMC_SDCFG1_PRE2ACT(x) (((x)&0x00000007)<<12) | ||
| 1967 | #define MCF_SDRAMC_SDCFG1_ACT2RW(x) (((x)&0x00000007)<<16) | ||
| 1968 | #define MCF_SDRAMC_SDCFG1_RDLAT(x) (((x)&0x0000000F)<<20) | ||
| 1969 | #define MCF_SDRAMC_SDCFG1_SWT2RD(x) (((x)&0x00000007)<<24) | ||
| 1970 | #define MCF_SDRAMC_SDCFG1_SRD2RW(x) (((x)&0x0000000F)<<28) | ||
| 1971 | |||
| 1972 | /* Bit definitions and macros for MCF_SDRAMC_SDCFG2 */ | ||
| 1973 | #define MCF_SDRAMC_SDCFG2_BL(x) (((x)&0x0000000F)<<16) | ||
| 1974 | #define MCF_SDRAMC_SDCFG2_BRD2WT(x) (((x)&0x0000000F)<<20) | ||
| 1975 | #define MCF_SDRAMC_SDCFG2_BWT2RW(x) (((x)&0x0000000F)<<24) | ||
| 1976 | #define MCF_SDRAMC_SDCFG2_BRD2PRE(x) (((x)&0x0000000F)<<28) | ||
| 1977 | |||
| 1978 | /* Device Errata - LIMP mode work around */ | ||
| 1979 | #define MCF_SDRAMC_REFRESH (0x40000000) | ||
| 1980 | |||
| 1981 | /* Bit definitions and macros for MCF_SDRAMC_SDDS */ | ||
| 1982 | #define MCF_SDRAMC_SDDS_SB_D(x) (((x)&0x00000003)<<0) | ||
| 1983 | #define MCF_SDRAMC_SDDS_SB_S(x) (((x)&0x00000003)<<2) | ||
| 1984 | #define MCF_SDRAMC_SDDS_SB_A(x) (((x)&0x00000003)<<4) | ||
| 1985 | #define MCF_SDRAMC_SDDS_SB_C(x) (((x)&0x00000003)<<6) | ||
| 1986 | #define MCF_SDRAMC_SDDS_SB_E(x) (((x)&0x00000003)<<8) | ||
| 1987 | |||
| 1988 | /* Bit definitions and macros for MCF_SDRAMC_SDCS */ | ||
| 1989 | #define MCF_SDRAMC_SDCS_CSSZ(x) (((x)&0x0000001F)<<0) | ||
| 1990 | #define MCF_SDRAMC_SDCS_BASE(x) (((x)&0x00000FFF)<<20) | ||
| 1991 | #define MCF_SDRAMC_SDCS_BA(x) ((x)&0xFFF00000) | ||
| 1992 | #define MCF_SDRAMC_SDCS_CSSZ_DIABLE (0x00000000) | ||
| 1993 | #define MCF_SDRAMC_SDCS_CSSZ_1MBYTE (0x00000013) | ||
| 1994 | #define MCF_SDRAMC_SDCS_CSSZ_2MBYTE (0x00000014) | ||
| 1995 | #define MCF_SDRAMC_SDCS_CSSZ_4MBYTE (0x00000015) | ||
| 1996 | #define MCF_SDRAMC_SDCS_CSSZ_8MBYTE (0x00000016) | ||
| 1997 | #define MCF_SDRAMC_SDCS_CSSZ_16MBYTE (0x00000017) | ||
| 1998 | #define MCF_SDRAMC_SDCS_CSSZ_32MBYTE (0x00000018) | ||
| 1999 | #define MCF_SDRAMC_SDCS_CSSZ_64MBYTE (0x00000019) | ||
| 2000 | #define MCF_SDRAMC_SDCS_CSSZ_128MBYTE (0x0000001A) | ||
| 2001 | #define MCF_SDRAMC_SDCS_CSSZ_256MBYTE (0x0000001B) | ||
| 2002 | #define MCF_SDRAMC_SDCS_CSSZ_512MBYTE (0x0000001C) | ||
| 2003 | #define MCF_SDRAMC_SDCS_CSSZ_1GBYTE (0x0000001D) | ||
| 2004 | #define MCF_SDRAMC_SDCS_CSSZ_2GBYTE (0x0000001E) | ||
| 2005 | #define MCF_SDRAMC_SDCS_CSSZ_4GBYTE (0x0000001F) | ||
| 2006 | |||
| 2007 | /********************************************************************* | ||
| 2008 | * | ||
| 2009 | * FlexCAN module registers | ||
| 2010 | * | ||
| 2011 | *********************************************************************/ | ||
| 2012 | #define MCF_FLEXCAN_BASEADDR(x) (0xFC020000+(x)*0x0800) | ||
| 2013 | #define MCF_FLEXCAN_CANMCR(x) MCF_REG32(0xFC020000+(x)*0x0800+0x00) | ||
| 2014 | #define MCF_FLEXCAN_CANCTRL(x) MCF_REG32(0xFC020000+(x)*0x0800+0x04) | ||
| 2015 | #define MCF_FLEXCAN_TIMER(x) MCF_REG32(0xFC020000+(x)*0x0800+0x08) | ||
| 2016 | #define MCF_FLEXCAN_RXGMASK(x) MCF_REG32(0xFC020000+(x)*0x0800+0x10) | ||
| 2017 | #define MCF_FLEXCAN_RX14MASK(x) MCF_REG32(0xFC020000+(x)*0x0800+0x14) | ||
| 2018 | #define MCF_FLEXCAN_RX15MASK(x) MCF_REG32(0xFC020000+(x)*0x0800+0x18) | ||
| 2019 | #define MCF_FLEXCAN_ERRCNT(x) MCF_REG32(0xFC020000+(x)*0x0800+0x1C) | ||
| 2020 | #define MCF_FLEXCAN_ERRSTAT(x) MCF_REG32(0xFC020000+(x)*0x0800+0x20) | ||
| 2021 | #define MCF_FLEXCAN_IMASK(x) MCF_REG32(0xFC020000+(x)*0x0800+0x28) | ||
| 2022 | #define MCF_FLEXCAN_IFLAG(x) MCF_REG32(0xFC020000+(x)*0x0800+0x30) | ||
| 2023 | |||
| 2024 | #define MCF_FLEXCAN_MB_CNT(x,y) MCF_REG32(0xFC020080+(x)*0x0800+(y)*0x10+0x0) | ||
| 2025 | #define MCF_FLEXCAN_MB_ID(x,y) MCF_REG32(0xFC020080+(x)*0x0800+(y)*0x10+0x4) | ||
| 2026 | #define MCF_FLEXCAN_MB_DB(x,y,z) MCF_REG08(0xFC020080+(x)*0x0800+(y)*0x10+0x8+(z)*0x1) | ||
| 2027 | |||
| 2028 | /* | ||
| 2029 | * FlexCAN Module Configuration Register | ||
| 2030 | */ | ||
| 2031 | #define CANMCR_MDIS (0x80000000) | ||
| 2032 | #define CANMCR_FRZ (0x40000000) | ||
| 2033 | #define CANMCR_HALT (0x10000000) | ||
| 2034 | #define CANMCR_SOFTRST (0x02000000) | ||
| 2035 | #define CANMCR_FRZACK (0x01000000) | ||
| 2036 | #define CANMCR_SUPV (0x00800000) | ||
| 2037 | #define CANMCR_MAXMB(x) ((x)&0x0F) | ||
| 2038 | |||
| 2039 | /* | ||
| 2040 | * FlexCAN Control Register | ||
| 2041 | */ | ||
| 2042 | #define CANCTRL_PRESDIV(x) (((x)&0xFF)<<24) | ||
| 2043 | #define CANCTRL_RJW(x) (((x)&0x03)<<22) | ||
| 2044 | #define CANCTRL_PSEG1(x) (((x)&0x07)<<19) | ||
| 2045 | #define CANCTRL_PSEG2(x) (((x)&0x07)<<16) | ||
| 2046 | #define CANCTRL_BOFFMSK (0x00008000) | ||
| 2047 | #define CANCTRL_ERRMSK (0x00004000) | ||
| 2048 | #define CANCTRL_CLKSRC (0x00002000) | ||
| 2049 | #define CANCTRL_LPB (0x00001000) | ||
| 2050 | #define CANCTRL_SAMP (0x00000080) | ||
| 2051 | #define CANCTRL_BOFFREC (0x00000040) | ||
| 2052 | #define CANCTRL_TSYNC (0x00000020) | ||
| 2053 | #define CANCTRL_LBUF (0x00000010) | ||
| 2054 | #define CANCTRL_LOM (0x00000008) | ||
| 2055 | #define CANCTRL_PROPSEG(x) ((x)&0x07) | ||
| 2056 | |||
| 2057 | /* | ||
| 2058 | * FlexCAN Error Counter Register | ||
| 2059 | */ | ||
| 2060 | #define ERRCNT_RXECTR(x) (((x)&0xFF)<<8) | ||
| 2061 | #define ERRCNT_TXECTR(x) ((x)&0xFF) | ||
| 2062 | |||
| 2063 | /* | ||
| 2064 | * FlexCAN Error and Status Register | ||
| 2065 | */ | ||
| 2066 | #define ERRSTAT_BITERR(x) (((x)&0x03)<<14) | ||
| 2067 | #define ERRSTAT_ACKERR (0x00002000) | ||
| 2068 | #define ERRSTAT_CRCERR (0x00001000) | ||
| 2069 | #define ERRSTAT_FRMERR (0x00000800) | ||
| 2070 | #define ERRSTAT_STFERR (0x00000400) | ||
| 2071 | #define ERRSTAT_TXWRN (0x00000200) | ||
| 2072 | #define ERRSTAT_RXWRN (0x00000100) | ||
| 2073 | #define ERRSTAT_IDLE (0x00000080) | ||
| 2074 | #define ERRSTAT_TXRX (0x00000040) | ||
| 2075 | #define ERRSTAT_FLTCONF(x) (((x)&0x03)<<4) | ||
| 2076 | #define ERRSTAT_BOFFINT (0x00000004) | ||
| 2077 | #define ERRSTAT_ERRINT (0x00000002) | ||
| 2078 | |||
| 2079 | /* | ||
| 2080 | * Interrupt Mask Register | ||
| 2081 | */ | ||
| 2082 | #define IMASK_BUF15M (0x8000) | ||
| 2083 | #define IMASK_BUF14M (0x4000) | ||
| 2084 | #define IMASK_BUF13M (0x2000) | ||
| 2085 | #define IMASK_BUF12M (0x1000) | ||
| 2086 | #define IMASK_BUF11M (0x0800) | ||
| 2087 | #define IMASK_BUF10M (0x0400) | ||
| 2088 | #define IMASK_BUF9M (0x0200) | ||
| 2089 | #define IMASK_BUF8M (0x0100) | ||
| 2090 | #define IMASK_BUF7M (0x0080) | ||
| 2091 | #define IMASK_BUF6M (0x0040) | ||
| 2092 | #define IMASK_BUF5M (0x0020) | ||
| 2093 | #define IMASK_BUF4M (0x0010) | ||
| 2094 | #define IMASK_BUF3M (0x0008) | ||
| 2095 | #define IMASK_BUF2M (0x0004) | ||
| 2096 | #define IMASK_BUF1M (0x0002) | ||
| 2097 | #define IMASK_BUF0M (0x0001) | ||
| 2098 | #define IMASK_BUFnM(x) (0x1<<(x)) | ||
| 2099 | #define IMASK_BUFF_ENABLE_ALL (0x1111) | ||
| 2100 | #define IMASK_BUFF_DISABLE_ALL (0x0000) | ||
| 2101 | |||
| 2102 | /* | ||
| 2103 | * Interrupt Flag Register | ||
| 2104 | */ | ||
| 2105 | #define IFLAG_BUF15M (0x8000) | ||
| 2106 | #define IFLAG_BUF14M (0x4000) | ||
| 2107 | #define IFLAG_BUF13M (0x2000) | ||
| 2108 | #define IFLAG_BUF12M (0x1000) | ||
| 2109 | #define IFLAG_BUF11M (0x0800) | ||
| 2110 | #define IFLAG_BUF10M (0x0400) | ||
| 2111 | #define IFLAG_BUF9M (0x0200) | ||
| 2112 | #define IFLAG_BUF8M (0x0100) | ||
| 2113 | #define IFLAG_BUF7M (0x0080) | ||
| 2114 | #define IFLAG_BUF6M (0x0040) | ||
| 2115 | #define IFLAG_BUF5M (0x0020) | ||
| 2116 | #define IFLAG_BUF4M (0x0010) | ||
| 2117 | #define IFLAG_BUF3M (0x0008) | ||
| 2118 | #define IFLAG_BUF2M (0x0004) | ||
| 2119 | #define IFLAG_BUF1M (0x0002) | ||
| 2120 | #define IFLAG_BUF0M (0x0001) | ||
| 2121 | #define IFLAG_BUFF_SET_ALL (0xFFFF) | ||
| 2122 | #define IFLAG_BUFF_CLEAR_ALL (0x0000) | ||
| 2123 | #define IFLAG_BUFnM(x) (0x1<<(x)) | ||
| 2124 | |||
| 2125 | /* | ||
| 2126 | * Message Buffers | ||
| 2127 | */ | ||
| 2128 | #define MB_CNT_CODE(x) (((x)&0x0F)<<24) | ||
| 2129 | #define MB_CNT_SRR (0x00400000) | ||
| 2130 | #define MB_CNT_IDE (0x00200000) | ||
| 2131 | #define MB_CNT_RTR (0x00100000) | ||
| 2132 | #define MB_CNT_LENGTH(x) (((x)&0x0F)<<16) | ||
| 2133 | #define MB_CNT_TIMESTAMP(x) ((x)&0xFFFF) | ||
| 2134 | #define MB_ID_STD(x) (((x)&0x07FF)<<18) | ||
| 2135 | #define MB_ID_EXT(x) ((x)&0x3FFFF) | ||
| 2136 | |||
| 2137 | /********************************************************************* | ||
| 2138 | * | ||
| 2139 | * Edge Port Module (EPORT) | ||
| 2140 | * | ||
| 2141 | *********************************************************************/ | ||
| 2142 | |||
| 2143 | /* Register read/write macros */ | ||
| 2144 | #define MCF_EPORT_EPPAR MCF_REG16(0xFC094000) | ||
| 2145 | #define MCF_EPORT_EPDDR MCF_REG08(0xFC094002) | ||
| 2146 | #define MCF_EPORT_EPIER MCF_REG08(0xFC094003) | ||
| 2147 | #define MCF_EPORT_EPDR MCF_REG08(0xFC094004) | ||
| 2148 | #define MCF_EPORT_EPPDR MCF_REG08(0xFC094005) | ||
| 2149 | #define MCF_EPORT_EPFR MCF_REG08(0xFC094006) | ||
| 2150 | |||
| 2151 | /* Bit definitions and macros for MCF_EPORT_EPPAR */ | ||
| 2152 | #define MCF_EPORT_EPPAR_EPPA1(x) (((x)&0x0003)<<2) | ||
| 2153 | #define MCF_EPORT_EPPAR_EPPA2(x) (((x)&0x0003)<<4) | ||
| 2154 | #define MCF_EPORT_EPPAR_EPPA3(x) (((x)&0x0003)<<6) | ||
| 2155 | #define MCF_EPORT_EPPAR_EPPA4(x) (((x)&0x0003)<<8) | ||
| 2156 | #define MCF_EPORT_EPPAR_EPPA5(x) (((x)&0x0003)<<10) | ||
| 2157 | #define MCF_EPORT_EPPAR_EPPA6(x) (((x)&0x0003)<<12) | ||
| 2158 | #define MCF_EPORT_EPPAR_EPPA7(x) (((x)&0x0003)<<14) | ||
| 2159 | #define MCF_EPORT_EPPAR_LEVEL (0) | ||
| 2160 | #define MCF_EPORT_EPPAR_RISING (1) | ||
| 2161 | #define MCF_EPORT_EPPAR_FALLING (2) | ||
| 2162 | #define MCF_EPORT_EPPAR_BOTH (3) | ||
| 2163 | #define MCF_EPORT_EPPAR_EPPA7_LEVEL (0x0000) | ||
| 2164 | #define MCF_EPORT_EPPAR_EPPA7_RISING (0x4000) | ||
| 2165 | #define MCF_EPORT_EPPAR_EPPA7_FALLING (0x8000) | ||
| 2166 | #define MCF_EPORT_EPPAR_EPPA7_BOTH (0xC000) | ||
| 2167 | #define MCF_EPORT_EPPAR_EPPA6_LEVEL (0x0000) | ||
| 2168 | #define MCF_EPORT_EPPAR_EPPA6_RISING (0x1000) | ||
| 2169 | #define MCF_EPORT_EPPAR_EPPA6_FALLING (0x2000) | ||
| 2170 | #define MCF_EPORT_EPPAR_EPPA6_BOTH (0x3000) | ||
| 2171 | #define MCF_EPORT_EPPAR_EPPA5_LEVEL (0x0000) | ||
| 2172 | #define MCF_EPORT_EPPAR_EPPA5_RISING (0x0400) | ||
| 2173 | #define MCF_EPORT_EPPAR_EPPA5_FALLING (0x0800) | ||
| 2174 | #define MCF_EPORT_EPPAR_EPPA5_BOTH (0x0C00) | ||
| 2175 | #define MCF_EPORT_EPPAR_EPPA4_LEVEL (0x0000) | ||
| 2176 | #define MCF_EPORT_EPPAR_EPPA4_RISING (0x0100) | ||
| 2177 | #define MCF_EPORT_EPPAR_EPPA4_FALLING (0x0200) | ||
| 2178 | #define MCF_EPORT_EPPAR_EPPA4_BOTH (0x0300) | ||
| 2179 | #define MCF_EPORT_EPPAR_EPPA3_LEVEL (0x0000) | ||
| 2180 | #define MCF_EPORT_EPPAR_EPPA3_RISING (0x0040) | ||
| 2181 | #define MCF_EPORT_EPPAR_EPPA3_FALLING (0x0080) | ||
| 2182 | #define MCF_EPORT_EPPAR_EPPA3_BOTH (0x00C0) | ||
| 2183 | #define MCF_EPORT_EPPAR_EPPA2_LEVEL (0x0000) | ||
| 2184 | #define MCF_EPORT_EPPAR_EPPA2_RISING (0x0010) | ||
| 2185 | #define MCF_EPORT_EPPAR_EPPA2_FALLING (0x0020) | ||
| 2186 | #define MCF_EPORT_EPPAR_EPPA2_BOTH (0x0030) | ||
| 2187 | #define MCF_EPORT_EPPAR_EPPA1_LEVEL (0x0000) | ||
| 2188 | #define MCF_EPORT_EPPAR_EPPA1_RISING (0x0004) | ||
| 2189 | #define MCF_EPORT_EPPAR_EPPA1_FALLING (0x0008) | ||
| 2190 | #define MCF_EPORT_EPPAR_EPPA1_BOTH (0x000C) | ||
| 2191 | |||
| 2192 | /* Bit definitions and macros for MCF_EPORT_EPDDR */ | ||
| 2193 | #define MCF_EPORT_EPDDR_EPDD1 (0x02) | ||
| 2194 | #define MCF_EPORT_EPDDR_EPDD2 (0x04) | ||
| 2195 | #define MCF_EPORT_EPDDR_EPDD3 (0x08) | ||
| 2196 | #define MCF_EPORT_EPDDR_EPDD4 (0x10) | ||
| 2197 | #define MCF_EPORT_EPDDR_EPDD5 (0x20) | ||
| 2198 | #define MCF_EPORT_EPDDR_EPDD6 (0x40) | ||
| 2199 | #define MCF_EPORT_EPDDR_EPDD7 (0x80) | ||
| 2200 | |||
| 2201 | /* Bit definitions and macros for MCF_EPORT_EPIER */ | ||
| 2202 | #define MCF_EPORT_EPIER_EPIE1 (0x02) | ||
| 2203 | #define MCF_EPORT_EPIER_EPIE2 (0x04) | ||
| 2204 | #define MCF_EPORT_EPIER_EPIE3 (0x08) | ||
| 2205 | #define MCF_EPORT_EPIER_EPIE4 (0x10) | ||
| 2206 | #define MCF_EPORT_EPIER_EPIE5 (0x20) | ||
| 2207 | #define MCF_EPORT_EPIER_EPIE6 (0x40) | ||
| 2208 | #define MCF_EPORT_EPIER_EPIE7 (0x80) | ||
| 2209 | |||
| 2210 | /* Bit definitions and macros for MCF_EPORT_EPDR */ | ||
| 2211 | #define MCF_EPORT_EPDR_EPD1 (0x02) | ||
| 2212 | #define MCF_EPORT_EPDR_EPD2 (0x04) | ||
| 2213 | #define MCF_EPORT_EPDR_EPD3 (0x08) | ||
| 2214 | #define MCF_EPORT_EPDR_EPD4 (0x10) | ||
| 2215 | #define MCF_EPORT_EPDR_EPD5 (0x20) | ||
| 2216 | #define MCF_EPORT_EPDR_EPD6 (0x40) | ||
| 2217 | #define MCF_EPORT_EPDR_EPD7 (0x80) | ||
| 2218 | |||
| 2219 | /* Bit definitions and macros for MCF_EPORT_EPPDR */ | ||
| 2220 | #define MCF_EPORT_EPPDR_EPPD1 (0x02) | ||
| 2221 | #define MCF_EPORT_EPPDR_EPPD2 (0x04) | ||
| 2222 | #define MCF_EPORT_EPPDR_EPPD3 (0x08) | ||
| 2223 | #define MCF_EPORT_EPPDR_EPPD4 (0x10) | ||
| 2224 | #define MCF_EPORT_EPPDR_EPPD5 (0x20) | ||
| 2225 | #define MCF_EPORT_EPPDR_EPPD6 (0x40) | ||
| 2226 | #define MCF_EPORT_EPPDR_EPPD7 (0x80) | ||
| 2227 | |||
| 2228 | /* Bit definitions and macros for MCF_EPORT_EPFR */ | ||
| 2229 | #define MCF_EPORT_EPFR_EPF1 (0x02) | ||
| 2230 | #define MCF_EPORT_EPFR_EPF2 (0x04) | ||
| 2231 | #define MCF_EPORT_EPFR_EPF3 (0x08) | ||
| 2232 | #define MCF_EPORT_EPFR_EPF4 (0x10) | ||
| 2233 | #define MCF_EPORT_EPFR_EPF5 (0x20) | ||
| 2234 | #define MCF_EPORT_EPFR_EPF6 (0x40) | ||
| 2235 | #define MCF_EPORT_EPFR_EPF7 (0x80) | ||
| 2236 | |||
| 2237 | /********************************************************************/ | ||
| 2238 | #endif /* m532xsim_h */ | ||
diff --git a/arch/m68knommu/include/asm/m5407sim.h b/arch/m68knommu/include/asm/m5407sim.h deleted file mode 100644 index cc22c4a53005..000000000000 --- a/arch/m68knommu/include/asm/m5407sim.h +++ /dev/null | |||
| @@ -1,157 +0,0 @@ | |||
| 1 | /****************************************************************************/ | ||
| 2 | |||
| 3 | /* | ||
| 4 | * m5407sim.h -- ColdFire 5407 System Integration Module support. | ||
| 5 | * | ||
| 6 | * (C) Copyright 2000, Lineo (www.lineo.com) | ||
| 7 | * (C) Copyright 1999, Moreton Bay Ventures Pty Ltd. | ||
| 8 | * | ||
| 9 | * Modified by David W. Miller for the MCF5307 Eval Board. | ||
| 10 | */ | ||
| 11 | |||
| 12 | /****************************************************************************/ | ||
| 13 | #ifndef m5407sim_h | ||
| 14 | #define m5407sim_h | ||
| 15 | /****************************************************************************/ | ||
| 16 | |||
| 17 | /* | ||
| 18 | * Define the 5407 SIM register set addresses. | ||
| 19 | */ | ||
| 20 | #define MCFSIM_RSR 0x00 /* Reset Status reg (r/w) */ | ||
| 21 | #define MCFSIM_SYPCR 0x01 /* System Protection reg (r/w)*/ | ||
| 22 | #define MCFSIM_SWIVR 0x02 /* SW Watchdog intr reg (r/w) */ | ||
| 23 | #define MCFSIM_SWSR 0x03 /* SW Watchdog service (r/w) */ | ||
| 24 | #define MCFSIM_PAR 0x04 /* Pin Assignment reg (r/w) */ | ||
| 25 | #define MCFSIM_IRQPAR 0x06 /* Interrupt Assignment reg (r/w) */ | ||
| 26 | #define MCFSIM_PLLCR 0x08 /* PLL Controll Reg*/ | ||
| 27 | #define MCFSIM_MPARK 0x0C /* BUS Master Control Reg*/ | ||
| 28 | #define MCFSIM_IPR 0x40 /* Interrupt Pend reg (r/w) */ | ||
| 29 | #define MCFSIM_IMR 0x44 /* Interrupt Mask reg (r/w) */ | ||
| 30 | #define MCFSIM_AVR 0x4b /* Autovector Ctrl reg (r/w) */ | ||
| 31 | #define MCFSIM_ICR0 0x4c /* Intr Ctrl reg 0 (r/w) */ | ||
| 32 | #define MCFSIM_ICR1 0x4d /* Intr Ctrl reg 1 (r/w) */ | ||
| 33 | #define MCFSIM_ICR2 0x4e /* Intr Ctrl reg 2 (r/w) */ | ||
| 34 | #define MCFSIM_ICR3 0x4f /* Intr Ctrl reg 3 (r/w) */ | ||
| 35 | #define MCFSIM_ICR4 0x50 /* Intr Ctrl reg 4 (r/w) */ | ||
| 36 | #define MCFSIM_ICR5 0x51 /* Intr Ctrl reg 5 (r/w) */ | ||
| 37 | #define MCFSIM_ICR6 0x52 /* Intr Ctrl reg 6 (r/w) */ | ||
| 38 | #define MCFSIM_ICR7 0x53 /* Intr Ctrl reg 7 (r/w) */ | ||
| 39 | #define MCFSIM_ICR8 0x54 /* Intr Ctrl reg 8 (r/w) */ | ||
| 40 | #define MCFSIM_ICR9 0x55 /* Intr Ctrl reg 9 (r/w) */ | ||
| 41 | #define MCFSIM_ICR10 0x56 /* Intr Ctrl reg 10 (r/w) */ | ||
| 42 | #define MCFSIM_ICR11 0x57 /* Intr Ctrl reg 11 (r/w) */ | ||
| 43 | |||
| 44 | #define MCFSIM_CSAR0 0x80 /* CS 0 Address 0 reg (r/w) */ | ||
| 45 | #define MCFSIM_CSMR0 0x84 /* CS 0 Mask 0 reg (r/w) */ | ||
| 46 | #define MCFSIM_CSCR0 0x8a /* CS 0 Control reg (r/w) */ | ||
| 47 | #define MCFSIM_CSAR1 0x8c /* CS 1 Address reg (r/w) */ | ||
| 48 | #define MCFSIM_CSMR1 0x90 /* CS 1 Mask reg (r/w) */ | ||
| 49 | #define MCFSIM_CSCR1 0x96 /* CS 1 Control reg (r/w) */ | ||
| 50 | |||
| 51 | #define MCFSIM_CSAR2 0x98 /* CS 2 Address reg (r/w) */ | ||
| 52 | #define MCFSIM_CSMR2 0x9c /* CS 2 Mask reg (r/w) */ | ||
| 53 | #define MCFSIM_CSCR2 0xa2 /* CS 2 Control reg (r/w) */ | ||
| 54 | #define MCFSIM_CSAR3 0xa4 /* CS 3 Address reg (r/w) */ | ||
| 55 | #define MCFSIM_CSMR3 0xa8 /* CS 3 Mask reg (r/w) */ | ||
| 56 | #define MCFSIM_CSCR3 0xae /* CS 3 Control reg (r/w) */ | ||
| 57 | #define MCFSIM_CSAR4 0xb0 /* CS 4 Address reg (r/w) */ | ||
| 58 | #define MCFSIM_CSMR4 0xb4 /* CS 4 Mask reg (r/w) */ | ||
| 59 | #define MCFSIM_CSCR4 0xba /* CS 4 Control reg (r/w) */ | ||
| 60 | #define MCFSIM_CSAR5 0xbc /* CS 5 Address reg (r/w) */ | ||
| 61 | #define MCFSIM_CSMR5 0xc0 /* CS 5 Mask reg (r/w) */ | ||
| 62 | #define MCFSIM_CSCR5 0xc6 /* CS 5 Control reg (r/w) */ | ||
| 63 | #define MCFSIM_CSAR6 0xc8 /* CS 6 Address reg (r/w) */ | ||
| 64 | #define MCFSIM_CSMR6 0xcc /* CS 6 Mask reg (r/w) */ | ||
| 65 | #define MCFSIM_CSCR6 0xd2 /* CS 6 Control reg (r/w) */ | ||
| 66 | #define MCFSIM_CSAR7 0xd4 /* CS 7 Address reg (r/w) */ | ||
| 67 | #define MCFSIM_CSMR7 0xd8 /* CS 7 Mask reg (r/w) */ | ||
| 68 | #define MCFSIM_CSCR7 0xde /* CS 7 Control reg (r/w) */ | ||
| 69 | |||
| 70 | #define MCFSIM_DCR 0x100 /* DRAM Control reg (r/w) */ | ||
| 71 | #define MCFSIM_DACR0 0x108 /* DRAM 0 Addr and Ctrl (r/w) */ | ||
| 72 | #define MCFSIM_DMR0 0x10c /* DRAM 0 Mask reg (r/w) */ | ||
| 73 | #define MCFSIM_DACR1 0x110 /* DRAM 1 Addr and Ctrl (r/w) */ | ||
| 74 | #define MCFSIM_DMR1 0x114 /* DRAM 1 Mask reg (r/w) */ | ||
| 75 | |||
| 76 | #define MCFSIM_PADDR 0x244 /* Parallel Direction (r/w) */ | ||
| 77 | #define MCFSIM_PADAT 0x248 /* Parallel Data (r/w) */ | ||
| 78 | |||
| 79 | |||
| 80 | /* | ||
| 81 | * Some symbol defines for the above... | ||
| 82 | */ | ||
| 83 | #define MCFSIM_SWDICR MCFSIM_ICR0 /* Watchdog timer ICR */ | ||
| 84 | #define MCFSIM_TIMER1ICR MCFSIM_ICR1 /* Timer 1 ICR */ | ||
| 85 | #define MCFSIM_TIMER2ICR MCFSIM_ICR2 /* Timer 2 ICR */ | ||
| 86 | #define MCFSIM_UART1ICR MCFSIM_ICR4 /* UART 1 ICR */ | ||
| 87 | #define MCFSIM_UART2ICR MCFSIM_ICR5 /* UART 2 ICR */ | ||
| 88 | #define MCFSIM_DMA0ICR MCFSIM_ICR6 /* DMA 0 ICR */ | ||
| 89 | #define MCFSIM_DMA1ICR MCFSIM_ICR7 /* DMA 1 ICR */ | ||
| 90 | #define MCFSIM_DMA2ICR MCFSIM_ICR8 /* DMA 2 ICR */ | ||
| 91 | #define MCFSIM_DMA3ICR MCFSIM_ICR9 /* DMA 3 ICR */ | ||
| 92 | |||
| 93 | /* | ||
| 94 | * Macro to set IMR register. It is 32 bits on the 5407. | ||
| 95 | */ | ||
| 96 | #define mcf_getimr() \ | ||
| 97 | *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR)) | ||
| 98 | |||
| 99 | #define mcf_setimr(imr) \ | ||
| 100 | *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR)) = (imr); | ||
| 101 | |||
| 102 | #define mcf_getipr() \ | ||
| 103 | *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IPR)) | ||
| 104 | |||
| 105 | |||
| 106 | /* | ||
| 107 | * Some symbol defines for the Parallel Port Pin Assignment Register | ||
| 108 | */ | ||
| 109 | #define MCFSIM_PAR_DREQ0 0x40 /* Set to select DREQ0 input */ | ||
| 110 | /* Clear to select par I/O */ | ||
| 111 | #define MCFSIM_PAR_DREQ1 0x20 /* Select DREQ1 input */ | ||
| 112 | /* Clear to select par I/O */ | ||
| 113 | |||
| 114 | /* | ||
| 115 | * Defines for the IRQPAR Register | ||
| 116 | */ | ||
| 117 | #define IRQ5_LEVEL4 0x80 | ||
| 118 | #define IRQ3_LEVEL6 0x40 | ||
| 119 | #define IRQ1_LEVEL2 0x20 | ||
| 120 | |||
| 121 | |||
| 122 | /* | ||
| 123 | * Define the Cache register flags. | ||
| 124 | */ | ||
| 125 | #define CACR_DEC 0x80000000 /* Enable data cache */ | ||
| 126 | #define CACR_DWP 0x40000000 /* Data write protection */ | ||
| 127 | #define CACR_DESB 0x20000000 /* Enable data store buffer */ | ||
| 128 | #define CACR_DDPI 0x10000000 /* Disable CPUSHL */ | ||
| 129 | #define CACR_DHCLK 0x08000000 /* Half data cache lock mode */ | ||
| 130 | #define CACR_DDCM_WT 0x00000000 /* Write through cache*/ | ||
| 131 | #define CACR_DDCM_CP 0x02000000 /* Copyback cache */ | ||
| 132 | #define CACR_DDCM_P 0x04000000 /* No cache, precise */ | ||
| 133 | #define CACR_DDCM_IMP 0x06000000 /* No cache, imprecise */ | ||
| 134 | #define CACR_DCINVA 0x01000000 /* Invalidate data cache */ | ||
| 135 | #define CACR_BEC 0x00080000 /* Enable branch cache */ | ||
| 136 | #define CACR_BCINVA 0x00040000 /* Invalidate branch cache */ | ||
| 137 | #define CACR_IEC 0x00008000 /* Enable instruction cache */ | ||
| 138 | #define CACR_DNFB 0x00002000 /* Inhibited fill buffer */ | ||
| 139 | #define CACR_IDPI 0x00001000 /* Disable CPUSHL */ | ||
| 140 | #define CACR_IHLCK 0x00000800 /* Intruction cache half lock */ | ||
| 141 | #define CACR_IDCM 0x00000400 /* Intruction cache inhibit */ | ||
| 142 | #define CACR_ICINVA 0x00000100 /* Invalidate instr cache */ | ||
| 143 | |||
| 144 | #define ACR_BASE_POS 24 /* Address Base */ | ||
| 145 | #define ACR_MASK_POS 16 /* Address Mask */ | ||
| 146 | #define ACR_ENABLE 0x00008000 /* Enable address */ | ||
| 147 | #define ACR_USER 0x00000000 /* User mode access only */ | ||
| 148 | #define ACR_SUPER 0x00002000 /* Supervisor mode only */ | ||
| 149 | #define ACR_ANY 0x00004000 /* Match any access mode */ | ||
| 150 | #define ACR_CM_WT 0x00000000 /* Write through mode */ | ||
| 151 | #define ACR_CM_CP 0x00000020 /* Copyback mode */ | ||
| 152 | #define ACR_CM_OFF_PRE 0x00000040 /* No cache, precise */ | ||
| 153 | #define ACR_CM_OFF_IMP 0x00000060 /* No cache, imprecise */ | ||
| 154 | #define ACR_WPROTECT 0x00000004 /* Write protect */ | ||
| 155 | |||
| 156 | /****************************************************************************/ | ||
| 157 | #endif /* m5407sim_h */ | ||
diff --git a/arch/m68knommu/include/asm/m68360.h b/arch/m68knommu/include/asm/m68360.h deleted file mode 100644 index eb7d39ef2855..000000000000 --- a/arch/m68knommu/include/asm/m68360.h +++ /dev/null | |||
| @@ -1,13 +0,0 @@ | |||
| 1 | #include "m68360_regs.h" | ||
| 2 | #include "m68360_pram.h" | ||
| 3 | #include "m68360_quicc.h" | ||
| 4 | #include "m68360_enet.h" | ||
| 5 | |||
| 6 | #ifdef CONFIG_M68360 | ||
| 7 | |||
| 8 | #define CPM_INTERRUPT 4 | ||
| 9 | |||
| 10 | /* see MC68360 User's Manual, p. 7-377 */ | ||
| 11 | #define CPM_VECTOR_BASE 0x04 /* 3 MSbits of CPM vector */ | ||
| 12 | |||
| 13 | #endif /* CONFIG_M68360 */ | ||
diff --git a/arch/m68knommu/include/asm/m68360_enet.h b/arch/m68knommu/include/asm/m68360_enet.h deleted file mode 100644 index c36f4d059203..000000000000 --- a/arch/m68knommu/include/asm/m68360_enet.h +++ /dev/null | |||
| @@ -1,177 +0,0 @@ | |||
| 1 | /*********************************** | ||
| 2 | * $Id: m68360_enet.h,v 1.1 2002/03/02 15:01:07 gerg Exp $ | ||
| 3 | *********************************** | ||
| 4 | * | ||
| 5 | *************************************** | ||
| 6 | * Definitions for the ETHERNET controllers | ||
| 7 | *************************************** | ||
| 8 | */ | ||
| 9 | |||
| 10 | #ifndef __ETHER_H | ||
| 11 | #define __ETHER_H | ||
| 12 | |||
| 13 | #include "quicc_simple.h" | ||
| 14 | |||
| 15 | /* | ||
| 16 | * transmit BD's | ||
| 17 | */ | ||
| 18 | #define T_R 0x8000 /* ready bit */ | ||
| 19 | #define E_T_PAD 0x4000 /* short frame padding */ | ||
| 20 | #define T_W 0x2000 /* wrap bit */ | ||
| 21 | #define T_I 0x1000 /* interrupt on completion */ | ||
| 22 | #define T_L 0x0800 /* last in frame */ | ||
| 23 | #define T_TC 0x0400 /* transmit CRC (when last) */ | ||
| 24 | |||
| 25 | #define T_DEF 0x0200 /* defer indication */ | ||
| 26 | #define T_HB 0x0100 /* heartbeat */ | ||
| 27 | #define T_LC 0x0080 /* error: late collision */ | ||
| 28 | #define T_RL 0x0040 /* error: retransmission limit */ | ||
| 29 | #define T_RC 0x003c /* retry count */ | ||
| 30 | #define T_UN 0x0002 /* error: underrun */ | ||
| 31 | #define T_CSL 0x0001 /* carier sense lost */ | ||
| 32 | #define T_ERROR (T_HB | T_LC | T_RL | T_UN | T_CSL) | ||
| 33 | |||
| 34 | /* | ||
| 35 | * receive BD's | ||
| 36 | */ | ||
| 37 | #define R_E 0x8000 /* buffer empty */ | ||
| 38 | #define R_W 0x2000 /* wrap bit */ | ||
| 39 | #define R_I 0x1000 /* interrupt on reception */ | ||
| 40 | #define R_L 0x0800 /* last BD in frame */ | ||
| 41 | #define R_F 0x0400 /* first BD in frame */ | ||
| 42 | #define R_M 0x0100 /* received because of promisc. mode */ | ||
| 43 | |||
| 44 | #define R_LG 0x0020 /* frame too long */ | ||
| 45 | #define R_NO 0x0010 /* non-octet aligned */ | ||
| 46 | #define R_SH 0x0008 /* short frame */ | ||
| 47 | #define R_CR 0x0004 /* receive CRC error */ | ||
| 48 | #define R_OV 0x0002 /* receive overrun */ | ||
| 49 | #define R_CL 0x0001 /* collision */ | ||
| 50 | #define ETHER_R_ERROR (R_LG | R_NO | R_SH | R_CR | R_OV | R_CL) | ||
| 51 | |||
| 52 | |||
| 53 | /* | ||
| 54 | * ethernet interrupts | ||
| 55 | */ | ||
| 56 | #define ETHERNET_GRA 0x0080 /* graceful stop complete */ | ||
| 57 | #define ETHERNET_TXE 0x0010 /* transmit error */ | ||
| 58 | #define ETHERNET_RXF 0x0008 /* receive frame */ | ||
| 59 | #define ETHERNET_BSY 0x0004 /* busy condition */ | ||
| 60 | #define ETHERNET_TXB 0x0002 /* transmit buffer */ | ||
| 61 | #define ETHERNET_RXB 0x0001 /* receive buffer */ | ||
| 62 | |||
| 63 | /* | ||
| 64 | * ethernet protocol specific mode register (PSMR) | ||
| 65 | */ | ||
| 66 | #define ETHER_HBC 0x8000 /* heartbeat checking */ | ||
| 67 | #define ETHER_FC 0x4000 /* force collision */ | ||
| 68 | #define ETHER_RSH 0x2000 /* receive short frames */ | ||
| 69 | #define ETHER_IAM 0x1000 /* individual address mode */ | ||
| 70 | #define ETHER_CRC_32 (0x2<<10) /* Enable CRC */ | ||
| 71 | #define ETHER_PRO 0x0200 /* promiscuous */ | ||
| 72 | #define ETHER_BRO 0x0100 /* broadcast address */ | ||
| 73 | #define ETHER_SBT 0x0080 /* stop backoff timer */ | ||
| 74 | #define ETHER_LPB 0x0040 /* Loop Back Mode */ | ||
| 75 | #define ETHER_SIP 0x0020 /* sample input pins */ | ||
| 76 | #define ETHER_LCW 0x0010 /* late collision window */ | ||
| 77 | #define ETHER_NIB_13 (0x0<<1) /* # of ignored bits 13 */ | ||
| 78 | #define ETHER_NIB_14 (0x1<<1) /* # of ignored bits 14 */ | ||
| 79 | #define ETHER_NIB_15 (0x2<<1) /* # of ignored bits 15 */ | ||
| 80 | #define ETHER_NIB_16 (0x3<<1) /* # of ignored bits 16 */ | ||
| 81 | #define ETHER_NIB_21 (0x4<<1) /* # of ignored bits 21 */ | ||
| 82 | #define ETHER_NIB_22 (0x5<<1) /* # of ignored bits 22 */ | ||
| 83 | #define ETHER_NIB_23 (0x6<<1) /* # of ignored bits 23 */ | ||
| 84 | #define ETHER_NIB_24 (0x7<<1) /* # of ignored bits 24 */ | ||
| 85 | |||
| 86 | /* | ||
| 87 | * ethernet specific parameters | ||
| 88 | */ | ||
| 89 | #define CRC_WORD 4 /* Length in bytes of CRC */ | ||
| 90 | #define C_PRES 0xffffffff /* preform 32 bit CRC */ | ||
| 91 | #define C_MASK 0xdebb20e3 /* comply with 32 bit CRC */ | ||
| 92 | #define CRCEC 0x00000000 | ||
| 93 | #define ALEC 0x00000000 | ||
| 94 | #define DISFC 0x00000000 | ||
| 95 | #define PADS 0x00000000 | ||
| 96 | #define RET_LIM 0x000f /* retry 15 times to send a frame before interrupt */ | ||
| 97 | #define ETH_MFLR 0x05ee /* 1518 max frame size */ | ||
| 98 | #define MINFLR 0x0040 /* Minimum frame size 64 */ | ||
| 99 | #define MAXD1 0x05ee /* Max dma count 1518 */ | ||
| 100 | #define MAXD2 0x05ee | ||
| 101 | #define GADDR1 0x00000000 /* Clear group address */ | ||
| 102 | #define GADDR2 0x00000000 | ||
| 103 | #define GADDR3 0x00000000 | ||
| 104 | #define GADDR4 0x00000000 | ||
| 105 | #define P_PER 0x00000000 /*not used */ | ||
| 106 | #define IADDR1 0x00000000 /* Individual hash table not used */ | ||
| 107 | #define IADDR2 0x00000000 | ||
| 108 | #define IADDR3 0x00000000 | ||
| 109 | #define IADDR4 0x00000000 | ||
| 110 | #define TADDR_H 0x00000000 /* clear this regs */ | ||
| 111 | #define TADDR_M 0x00000000 | ||
| 112 | #define TADDR_L 0x00000000 | ||
| 113 | |||
| 114 | /* SCC Parameter Ram */ | ||
| 115 | #define RFCR 0x18 /* normal operation */ | ||
| 116 | #define TFCR 0x18 /* normal operation */ | ||
| 117 | #define E_MRBLR 1518 /* Max ethernet frame length */ | ||
| 118 | |||
| 119 | /* | ||
| 120 | * ethernet specific structure | ||
| 121 | */ | ||
| 122 | typedef union { | ||
| 123 | unsigned char b[6]; | ||
| 124 | struct { | ||
| 125 | unsigned short high; | ||
| 126 | unsigned short middl; | ||
| 127 | unsigned short low; | ||
| 128 | } w; | ||
| 129 | } ETHER_ADDR; | ||
| 130 | |||
| 131 | typedef struct { | ||
| 132 | int max_frame_length; | ||
| 133 | int promisc_mode; | ||
| 134 | int reject_broadcast; | ||
| 135 | ETHER_ADDR phys_adr; | ||
| 136 | } ETHER_SPECIFIC; | ||
| 137 | |||
| 138 | typedef struct { | ||
| 139 | ETHER_ADDR dst_addr; | ||
| 140 | ETHER_ADDR src_addr; | ||
| 141 | unsigned short type_or_len; | ||
| 142 | unsigned char data[1]; | ||
| 143 | } ETHER_FRAME; | ||
| 144 | |||
| 145 | #define MAX_DATALEN 1500 | ||
| 146 | typedef struct { | ||
| 147 | ETHER_ADDR dst_addr; | ||
| 148 | ETHER_ADDR src_addr; | ||
| 149 | unsigned short type_or_len; | ||
| 150 | unsigned char data[MAX_DATALEN]; | ||
| 151 | unsigned char fcs[CRC_WORD]; | ||
| 152 | } ETHER_MAX_FRAME; | ||
| 153 | |||
| 154 | |||
| 155 | /* | ||
| 156 | * Internal ethernet function prototypes | ||
| 157 | */ | ||
| 158 | void ether_interrupt(int scc_num); | ||
| 159 | /* mleslie: debug */ | ||
| 160 | /* static void ethernet_rx_internal(int scc_num); */ | ||
| 161 | /* static void ethernet_tx_internal(int scc_num); */ | ||
| 162 | |||
| 163 | /* | ||
| 164 | * User callable routines prototypes (ethernet specific) | ||
| 165 | */ | ||
| 166 | void ethernet_init(int scc_number, | ||
| 167 | alloc_routine *alloc_buffer, | ||
| 168 | free_routine *free_buffer, | ||
| 169 | store_rx_buffer_routine *store_rx_buffer, | ||
| 170 | handle_tx_error_routine *handle_tx_error, | ||
| 171 | handle_rx_error_routine *handle_rx_error, | ||
| 172 | handle_lost_error_routine *handle_lost_error, | ||
| 173 | ETHER_SPECIFIC *ether_spec); | ||
| 174 | int ethernet_tx(int scc_number, void *buf, int length); | ||
| 175 | |||
| 176 | #endif | ||
| 177 | |||
diff --git a/arch/m68knommu/include/asm/m68360_pram.h b/arch/m68knommu/include/asm/m68360_pram.h deleted file mode 100644 index e6088bbce93d..000000000000 --- a/arch/m68knommu/include/asm/m68360_pram.h +++ /dev/null | |||
| @@ -1,431 +0,0 @@ | |||
| 1 | /*********************************** | ||
| 2 | * $Id: m68360_pram.h,v 1.1 2002/03/02 15:01:07 gerg Exp $ | ||
| 3 | *********************************** | ||
| 4 | * | ||
| 5 | *************************************** | ||
| 6 | * Definitions of the parameter area RAM. | ||
| 7 | * Note that different structures are overlaid | ||
| 8 | * at the same offsets for the different modes | ||
| 9 | * of operation. | ||
| 10 | *************************************** | ||
| 11 | */ | ||
| 12 | |||
| 13 | #ifndef __PRAM_H | ||
| 14 | #define __PRAM_H | ||
| 15 | |||
| 16 | /* Time slot assignment table */ | ||
| 17 | #define VALID_SLOT 0x8000 | ||
| 18 | #define WRAP_SLOT 0x4000 | ||
| 19 | |||
| 20 | /***************************************************************** | ||
| 21 | Global Multichannel parameter RAM | ||
| 22 | *****************************************************************/ | ||
| 23 | struct global_multi_pram { | ||
| 24 | /* | ||
| 25 | * Global Multichannel parameter RAM | ||
| 26 | */ | ||
| 27 | unsigned long mcbase; /* Multichannel Base pointer */ | ||
| 28 | unsigned short qmcstate; /* Multichannel Controller state */ | ||
| 29 | unsigned short mrblr; /* Maximum Receive Buffer Length */ | ||
| 30 | unsigned short tx_s_ptr; /* TSTATx Pointer */ | ||
| 31 | unsigned short rxptr; /* Current Time slot entry in TSATRx */ | ||
| 32 | unsigned short grfthr; /* Global Receive frame threshold */ | ||
| 33 | unsigned short grfcnt; /* Global Receive Frame Count */ | ||
| 34 | unsigned long intbase; /* Multichannel Base address */ | ||
| 35 | unsigned long iintptr; /* Pointer to interrupt queue */ | ||
| 36 | unsigned short rx_s_ptr; /* TSTARx Pointer */ | ||
| 37 | |||
| 38 | unsigned short txptr; /* Current Time slot entry in TSATTx */ | ||
| 39 | unsigned long c_mask32; /* CRC Constant (debb20e3) */ | ||
| 40 | unsigned short tsatrx[32]; /* Time Slot Assignment Table Rx */ | ||
| 41 | unsigned short tsattx[32]; /* Time Slot Assignment Table Tx */ | ||
| 42 | unsigned short c_mask16; /* CRC Constant (f0b8) */ | ||
| 43 | }; | ||
| 44 | |||
| 45 | /***************************************************************** | ||
| 46 | Quicc32 HDLC parameter RAM | ||
| 47 | *****************************************************************/ | ||
| 48 | struct quicc32_pram { | ||
| 49 | |||
| 50 | unsigned short tbase; /* Tx Buffer Descriptors Base Address */ | ||
| 51 | unsigned short chamr; /* Channel Mode Register */ | ||
| 52 | unsigned long tstate; /* Tx Internal State */ | ||
| 53 | unsigned long txintr; /* Tx Internal Data Pointer */ | ||
| 54 | unsigned short tbptr; /* Tx Buffer Descriptor Pointer */ | ||
| 55 | unsigned short txcntr; /* Tx Internal Byte Count */ | ||
| 56 | unsigned long tupack; /* (Tx Temp) */ | ||
| 57 | unsigned long zistate; /* Zero Insertion machine state */ | ||
| 58 | unsigned long tcrc; /* Temp Transmit CRC */ | ||
| 59 | unsigned short intmask; /* Channel's interrupt mask flags */ | ||
| 60 | unsigned short bdflags; | ||
| 61 | unsigned short rbase; /* Rx Buffer Descriptors Base Address */ | ||
| 62 | unsigned short mflr; /* Max Frame Length Register */ | ||
| 63 | unsigned long rstate; /* Rx Internal State */ | ||
| 64 | unsigned long rxintr; /* Rx Internal Data Pointer */ | ||
| 65 | unsigned short rbptr; /* Rx Buffer Descriptor Pointer */ | ||
| 66 | unsigned short rxbyc; /* Rx Internal Byte Count */ | ||
| 67 | unsigned long rpack; /* (Rx Temp) */ | ||
| 68 | unsigned long zdstate; /* Zero Deletion machine state */ | ||
| 69 | unsigned long rcrc; /* Temp Transmit CRC */ | ||
| 70 | unsigned short maxc; /* Max_length counter */ | ||
| 71 | unsigned short tmp_mb; /* Temp */ | ||
| 72 | }; | ||
| 73 | |||
| 74 | |||
| 75 | /***************************************************************** | ||
| 76 | HDLC parameter RAM | ||
| 77 | *****************************************************************/ | ||
| 78 | |||
| 79 | struct hdlc_pram { | ||
| 80 | /* | ||
| 81 | * SCC parameter RAM | ||
| 82 | */ | ||
| 83 | unsigned short rbase; /* RX BD base address */ | ||
| 84 | unsigned short tbase; /* TX BD base address */ | ||
| 85 | unsigned char rfcr; /* Rx function code */ | ||
| 86 | unsigned char tfcr; /* Tx function code */ | ||
| 87 | unsigned short mrblr; /* Rx buffer length */ | ||
| 88 | unsigned long rstate; /* Rx internal state */ | ||
| 89 | unsigned long rptr; /* Rx internal data pointer */ | ||
| 90 | unsigned short rbptr; /* rb BD Pointer */ | ||
| 91 | unsigned short rcount; /* Rx internal byte count */ | ||
| 92 | unsigned long rtemp; /* Rx temp */ | ||
| 93 | unsigned long tstate; /* Tx internal state */ | ||
| 94 | unsigned long tptr; /* Tx internal data pointer */ | ||
| 95 | unsigned short tbptr; /* Tx BD pointer */ | ||
| 96 | unsigned short tcount; /* Tx byte count */ | ||
| 97 | unsigned long ttemp; /* Tx temp */ | ||
| 98 | unsigned long rcrc; /* temp receive CRC */ | ||
| 99 | unsigned long tcrc; /* temp transmit CRC */ | ||
| 100 | |||
| 101 | /* | ||
| 102 | * HDLC specific parameter RAM | ||
| 103 | */ | ||
| 104 | unsigned char RESERVED1[4]; /* Reserved area */ | ||
| 105 | unsigned long c_mask; /* CRC constant */ | ||
| 106 | unsigned long c_pres; /* CRC preset */ | ||
| 107 | unsigned short disfc; /* discarded frame counter */ | ||
| 108 | unsigned short crcec; /* CRC error counter */ | ||
| 109 | unsigned short abtsc; /* abort sequence counter */ | ||
| 110 | unsigned short nmarc; /* nonmatching address rx cnt */ | ||
| 111 | unsigned short retrc; /* frame retransmission cnt */ | ||
| 112 | unsigned short mflr; /* maximum frame length reg */ | ||
| 113 | unsigned short max_cnt; /* maximum length counter */ | ||
| 114 | unsigned short rfthr; /* received frames threshold */ | ||
| 115 | unsigned short rfcnt; /* received frames count */ | ||
| 116 | unsigned short hmask; /* user defined frm addr mask */ | ||
| 117 | unsigned short haddr1; /* user defined frm address 1 */ | ||
| 118 | unsigned short haddr2; /* user defined frm address 2 */ | ||
| 119 | unsigned short haddr3; /* user defined frm address 3 */ | ||
| 120 | unsigned short haddr4; /* user defined frm address 4 */ | ||
| 121 | unsigned short tmp; /* temp */ | ||
| 122 | unsigned short tmp_mb; /* temp */ | ||
| 123 | }; | ||
| 124 | |||
| 125 | |||
| 126 | |||
| 127 | /***************************************************************** | ||
| 128 | UART parameter RAM | ||
| 129 | *****************************************************************/ | ||
| 130 | |||
| 131 | /* | ||
| 132 | * bits in uart control characters table | ||
| 133 | */ | ||
| 134 | #define CC_INVALID 0x8000 /* control character is valid */ | ||
| 135 | #define CC_REJ 0x4000 /* don't store char in buffer */ | ||
| 136 | #define CC_CHAR 0x00ff /* control character */ | ||
| 137 | |||
| 138 | /* UART */ | ||
| 139 | struct uart_pram { | ||
| 140 | /* | ||
| 141 | * SCC parameter RAM | ||
| 142 | */ | ||
| 143 | unsigned short rbase; /* RX BD base address */ | ||
| 144 | unsigned short tbase; /* TX BD base address */ | ||
| 145 | unsigned char rfcr; /* Rx function code */ | ||
| 146 | unsigned char tfcr; /* Tx function code */ | ||
| 147 | unsigned short mrblr; /* Rx buffer length */ | ||
| 148 | unsigned long rstate; /* Rx internal state */ | ||
| 149 | unsigned long rptr; /* Rx internal data pointer */ | ||
| 150 | unsigned short rbptr; /* rb BD Pointer */ | ||
| 151 | unsigned short rcount; /* Rx internal byte count */ | ||
| 152 | unsigned long rx_temp; /* Rx temp */ | ||
| 153 | unsigned long tstate; /* Tx internal state */ | ||
| 154 | unsigned long tptr; /* Tx internal data pointer */ | ||
| 155 | unsigned short tbptr; /* Tx BD pointer */ | ||
| 156 | unsigned short tcount; /* Tx byte count */ | ||
| 157 | unsigned long ttemp; /* Tx temp */ | ||
| 158 | unsigned long rcrc; /* temp receive CRC */ | ||
| 159 | unsigned long tcrc; /* temp transmit CRC */ | ||
| 160 | |||
| 161 | /* | ||
| 162 | * UART specific parameter RAM | ||
| 163 | */ | ||
| 164 | unsigned char RESERVED1[8]; /* Reserved area */ | ||
| 165 | unsigned short max_idl; /* maximum idle characters */ | ||
| 166 | unsigned short idlc; /* rx idle counter (internal) */ | ||
| 167 | unsigned short brkcr; /* break count register */ | ||
| 168 | |||
| 169 | unsigned short parec; /* Rx parity error counter */ | ||
| 170 | unsigned short frmer; /* Rx framing error counter */ | ||
| 171 | unsigned short nosec; /* Rx noise counter */ | ||
| 172 | unsigned short brkec; /* Rx break character counter */ | ||
| 173 | unsigned short brkln; /* Reaceive break length */ | ||
| 174 | |||
| 175 | unsigned short uaddr1; /* address character 1 */ | ||
| 176 | unsigned short uaddr2; /* address character 2 */ | ||
| 177 | unsigned short rtemp; /* temp storage */ | ||
| 178 | unsigned short toseq; /* Tx out of sequence char */ | ||
| 179 | unsigned short cc[8]; /* Rx control characters */ | ||
| 180 | unsigned short rccm; /* Rx control char mask */ | ||
| 181 | unsigned short rccr; /* Rx control char register */ | ||
| 182 | unsigned short rlbc; /* Receive last break char */ | ||
| 183 | }; | ||
| 184 | |||
| 185 | |||
| 186 | |||
| 187 | /***************************************************************** | ||
| 188 | BISYNC parameter RAM | ||
| 189 | *****************************************************************/ | ||
| 190 | |||
| 191 | struct bisync_pram { | ||
| 192 | /* | ||
| 193 | * SCC parameter RAM | ||
| 194 | */ | ||
| 195 | unsigned short rbase; /* RX BD base address */ | ||
| 196 | unsigned short tbase; /* TX BD base address */ | ||
| 197 | unsigned char rfcr; /* Rx function code */ | ||
| 198 | unsigned char tfcr; /* Tx function code */ | ||
| 199 | unsigned short mrblr; /* Rx buffer length */ | ||
| 200 | unsigned long rstate; /* Rx internal state */ | ||
| 201 | unsigned long rptr; /* Rx internal data pointer */ | ||
| 202 | unsigned short rbptr; /* rb BD Pointer */ | ||
| 203 | unsigned short rcount; /* Rx internal byte count */ | ||
| 204 | unsigned long rtemp; /* Rx temp */ | ||
| 205 | unsigned long tstate; /* Tx internal state */ | ||
| 206 | unsigned long tptr; /* Tx internal data pointer */ | ||
| 207 | unsigned short tbptr; /* Tx BD pointer */ | ||
| 208 | unsigned short tcount; /* Tx byte count */ | ||
| 209 | unsigned long ttemp; /* Tx temp */ | ||
| 210 | unsigned long rcrc; /* temp receive CRC */ | ||
| 211 | unsigned long tcrc; /* temp transmit CRC */ | ||
| 212 | |||
| 213 | /* | ||
| 214 | * BISYNC specific parameter RAM | ||
| 215 | */ | ||
| 216 | unsigned char RESERVED1[4]; /* Reserved area */ | ||
| 217 | unsigned long crcc; /* CRC Constant Temp Value */ | ||
| 218 | unsigned short prcrc; /* Preset Receiver CRC-16/LRC */ | ||
| 219 | unsigned short ptcrc; /* Preset Transmitter CRC-16/LRC */ | ||
| 220 | unsigned short parec; /* Receive Parity Error Counter */ | ||
| 221 | unsigned short bsync; /* BISYNC SYNC Character */ | ||
| 222 | unsigned short bdle; /* BISYNC DLE Character */ | ||
| 223 | unsigned short cc[8]; /* Rx control characters */ | ||
| 224 | unsigned short rccm; /* Receive Control Character Mask */ | ||
| 225 | }; | ||
| 226 | |||
| 227 | /***************************************************************** | ||
| 228 | IOM2 parameter RAM | ||
| 229 | (overlaid on tx bd[5] of SCC channel[2]) | ||
| 230 | *****************************************************************/ | ||
| 231 | struct iom2_pram { | ||
| 232 | unsigned short ci_data; /* ci data */ | ||
| 233 | unsigned short monitor_data; /* monitor data */ | ||
| 234 | unsigned short tstate; /* transmitter state */ | ||
| 235 | unsigned short rstate; /* receiver state */ | ||
| 236 | }; | ||
| 237 | |||
| 238 | /***************************************************************** | ||
| 239 | SPI/SMC parameter RAM | ||
| 240 | (overlaid on tx bd[6,7] of SCC channel[2]) | ||
| 241 | *****************************************************************/ | ||
| 242 | |||
| 243 | #define SPI_R 0x8000 /* Ready bit in BD */ | ||
| 244 | |||
| 245 | struct spi_pram { | ||
| 246 | unsigned short rbase; /* Rx BD Base Address */ | ||
| 247 | unsigned short tbase; /* Tx BD Base Address */ | ||
| 248 | unsigned char rfcr; /* Rx function code */ | ||
| 249 | unsigned char tfcr; /* Tx function code */ | ||
| 250 | unsigned short mrblr; /* Rx buffer length */ | ||
| 251 | unsigned long rstate; /* Rx internal state */ | ||
| 252 | unsigned long rptr; /* Rx internal data pointer */ | ||
| 253 | unsigned short rbptr; /* rb BD Pointer */ | ||
| 254 | unsigned short rcount; /* Rx internal byte count */ | ||
| 255 | unsigned long rtemp; /* Rx temp */ | ||
| 256 | unsigned long tstate; /* Tx internal state */ | ||
| 257 | unsigned long tptr; /* Tx internal data pointer */ | ||
| 258 | unsigned short tbptr; /* Tx BD pointer */ | ||
| 259 | unsigned short tcount; /* Tx byte count */ | ||
| 260 | unsigned long ttemp; /* Tx temp */ | ||
| 261 | }; | ||
| 262 | |||
| 263 | struct smc_uart_pram { | ||
| 264 | unsigned short rbase; /* Rx BD Base Address */ | ||
| 265 | unsigned short tbase; /* Tx BD Base Address */ | ||
| 266 | unsigned char rfcr; /* Rx function code */ | ||
| 267 | unsigned char tfcr; /* Tx function code */ | ||
| 268 | unsigned short mrblr; /* Rx buffer length */ | ||
| 269 | unsigned long rstate; /* Rx internal state */ | ||
| 270 | unsigned long rptr; /* Rx internal data pointer */ | ||
| 271 | unsigned short rbptr; /* rb BD Pointer */ | ||
| 272 | unsigned short rcount; /* Rx internal byte count */ | ||
| 273 | unsigned long rtemp; /* Rx temp */ | ||
| 274 | unsigned long tstate; /* Tx internal state */ | ||
| 275 | unsigned long tptr; /* Tx internal data pointer */ | ||
| 276 | unsigned short tbptr; /* Tx BD pointer */ | ||
| 277 | unsigned short tcount; /* Tx byte count */ | ||
| 278 | unsigned long ttemp; /* Tx temp */ | ||
| 279 | unsigned short max_idl; /* Maximum IDLE Characters */ | ||
| 280 | unsigned short idlc; /* Temporary IDLE Counter */ | ||
| 281 | unsigned short brkln; /* Last Rx Break Length */ | ||
| 282 | unsigned short brkec; /* Rx Break Condition Counter */ | ||
| 283 | unsigned short brkcr; /* Break Count Register (Tx) */ | ||
| 284 | unsigned short r_mask; /* Temporary bit mask */ | ||
| 285 | }; | ||
| 286 | |||
| 287 | struct smc_trnsp_pram { | ||
| 288 | unsigned short rbase; /* rx BD Base Address */ | ||
| 289 | unsigned short tbase; /* Tx BD Base Address */ | ||
| 290 | unsigned char rfcr; /* Rx function code */ | ||
| 291 | unsigned char tfcr; /* Tx function code */ | ||
| 292 | unsigned short mrblr; /* Rx buffer length */ | ||
| 293 | unsigned long rstate; /* Rx internal state */ | ||
| 294 | unsigned long rptr; /* Rx internal data pointer */ | ||
| 295 | unsigned short rbptr; /* rb BD Pointer */ | ||
| 296 | unsigned short rcount; /* Rx internal byte count */ | ||
| 297 | unsigned long rtemp; /* Rx temp */ | ||
| 298 | unsigned long tstate; /* Tx internal state */ | ||
| 299 | unsigned long tptr; /* Tx internal data pointer */ | ||
| 300 | unsigned short tbptr; /* Tx BD pointer */ | ||
| 301 | unsigned short tcount; /* Tx byte count */ | ||
| 302 | unsigned long ttemp; /* Tx temp */ | ||
| 303 | unsigned short reserved[5]; /* Reserved */ | ||
| 304 | }; | ||
| 305 | |||
| 306 | struct idma_pram { | ||
| 307 | unsigned short ibase; /* IDMA BD Base Address */ | ||
| 308 | unsigned short ibptr; /* IDMA buffer descriptor pointer */ | ||
| 309 | unsigned long istate; /* IDMA internal state */ | ||
| 310 | unsigned long itemp; /* IDMA temp */ | ||
| 311 | }; | ||
| 312 | |||
| 313 | struct ethernet_pram { | ||
| 314 | /* | ||
| 315 | * SCC parameter RAM | ||
| 316 | */ | ||
| 317 | unsigned short rbase; /* RX BD base address */ | ||
| 318 | unsigned short tbase; /* TX BD base address */ | ||
| 319 | unsigned char rfcr; /* Rx function code */ | ||
| 320 | unsigned char tfcr; /* Tx function code */ | ||
| 321 | unsigned short mrblr; /* Rx buffer length */ | ||
| 322 | unsigned long rstate; /* Rx internal state */ | ||
| 323 | unsigned long rptr; /* Rx internal data pointer */ | ||
| 324 | unsigned short rbptr; /* rb BD Pointer */ | ||
| 325 | unsigned short rcount; /* Rx internal byte count */ | ||
| 326 | unsigned long rtemp; /* Rx temp */ | ||
| 327 | unsigned long tstate; /* Tx internal state */ | ||
| 328 | unsigned long tptr; /* Tx internal data pointer */ | ||
| 329 | unsigned short tbptr; /* Tx BD pointer */ | ||
| 330 | unsigned short tcount; /* Tx byte count */ | ||
| 331 | unsigned long ttemp; /* Tx temp */ | ||
| 332 | unsigned long rcrc; /* temp receive CRC */ | ||
| 333 | unsigned long tcrc; /* temp transmit CRC */ | ||
| 334 | |||
| 335 | /* | ||
| 336 | * ETHERNET specific parameter RAM | ||
| 337 | */ | ||
| 338 | unsigned long c_pres; /* preset CRC */ | ||
| 339 | unsigned long c_mask; /* constant mask for CRC */ | ||
| 340 | unsigned long crcec; /* CRC error counter */ | ||
| 341 | unsigned long alec; /* alighnment error counter */ | ||
| 342 | unsigned long disfc; /* discard frame counter */ | ||
| 343 | unsigned short pads; /* short frame PAD characters */ | ||
| 344 | unsigned short ret_lim; /* retry limit threshold */ | ||
| 345 | unsigned short ret_cnt; /* retry limit counter */ | ||
| 346 | unsigned short mflr; /* maximum frame length reg */ | ||
| 347 | unsigned short minflr; /* minimum frame length reg */ | ||
| 348 | unsigned short maxd1; /* maximum DMA1 length reg */ | ||
| 349 | unsigned short maxd2; /* maximum DMA2 length reg */ | ||
| 350 | unsigned short maxd; /* rx max DMA */ | ||
| 351 | unsigned short dma_cnt; /* rx dma counter */ | ||
| 352 | unsigned short max_b; /* max bd byte count */ | ||
| 353 | unsigned short gaddr1; /* group address filter 1 */ | ||
| 354 | unsigned short gaddr2; /* group address filter 2 */ | ||
| 355 | unsigned short gaddr3; /* group address filter 3 */ | ||
| 356 | unsigned short gaddr4; /* group address filter 4 */ | ||
| 357 | unsigned long tbuf0_data0; /* save area 0 - current frm */ | ||
| 358 | unsigned long tbuf0_data1; /* save area 1 - current frm */ | ||
| 359 | unsigned long tbuf0_rba0; | ||
| 360 | unsigned long tbuf0_crc; | ||
| 361 | unsigned short tbuf0_bcnt; | ||
| 362 | union { | ||
| 363 | unsigned char b[6]; | ||
| 364 | struct { | ||
| 365 | unsigned short high; | ||
| 366 | unsigned short middl; | ||
| 367 | unsigned short low; | ||
| 368 | } w; | ||
| 369 | } paddr; | ||
| 370 | unsigned short p_per; /* persistence */ | ||
| 371 | unsigned short rfbd_ptr; /* rx first bd pointer */ | ||
| 372 | unsigned short tfbd_ptr; /* tx first bd pointer */ | ||
| 373 | unsigned short tlbd_ptr; /* tx last bd pointer */ | ||
| 374 | unsigned long tbuf1_data0; /* save area 0 - next frame */ | ||
| 375 | unsigned long tbuf1_data1; /* save area 1 - next frame */ | ||
| 376 | unsigned long tbuf1_rba0; | ||
| 377 | unsigned long tbuf1_crc; | ||
| 378 | unsigned short tbuf1_bcnt; | ||
| 379 | unsigned short tx_len; /* tx frame length counter */ | ||
| 380 | unsigned short iaddr1; /* individual address filter 1*/ | ||
| 381 | unsigned short iaddr2; /* individual address filter 2*/ | ||
| 382 | unsigned short iaddr3; /* individual address filter 3*/ | ||
| 383 | unsigned short iaddr4; /* individual address filter 4*/ | ||
| 384 | unsigned short boff_cnt; /* back-off counter */ | ||
| 385 | unsigned short taddr_h; /* temp address (MSB) */ | ||
| 386 | unsigned short taddr_m; /* temp address */ | ||
| 387 | unsigned short taddr_l; /* temp address (LSB) */ | ||
| 388 | }; | ||
| 389 | |||
| 390 | struct transparent_pram { | ||
| 391 | /* | ||
| 392 | * SCC parameter RAM | ||
| 393 | */ | ||
| 394 | unsigned short rbase; /* RX BD base address */ | ||
| 395 | unsigned short tbase; /* TX BD base address */ | ||
| 396 | unsigned char rfcr; /* Rx function code */ | ||
| 397 | unsigned char tfcr; /* Tx function code */ | ||
| 398 | unsigned short mrblr; /* Rx buffer length */ | ||
| 399 | unsigned long rstate; /* Rx internal state */ | ||
| 400 | unsigned long rptr; /* Rx internal data pointer */ | ||
| 401 | unsigned short rbptr; /* rb BD Pointer */ | ||
| 402 | unsigned short rcount; /* Rx internal byte count */ | ||
| 403 | unsigned long rtemp; /* Rx temp */ | ||
| 404 | unsigned long tstate; /* Tx internal state */ | ||
| 405 | unsigned long tptr; /* Tx internal data pointer */ | ||
| 406 | unsigned short tbptr; /* Tx BD pointer */ | ||
| 407 | unsigned short tcount; /* Tx byte count */ | ||
| 408 | unsigned long ttemp; /* Tx temp */ | ||
| 409 | unsigned long rcrc; /* temp receive CRC */ | ||
| 410 | unsigned long tcrc; /* temp transmit CRC */ | ||
| 411 | |||
| 412 | /* | ||
| 413 | * TRANSPARENT specific parameter RAM | ||
| 414 | */ | ||
| 415 | unsigned long crc_p; /* CRC Preset */ | ||
| 416 | unsigned long crc_c; /* CRC constant */ | ||
| 417 | }; | ||
| 418 | |||
| 419 | struct timer_pram { | ||
| 420 | /* | ||
| 421 | * RISC timers parameter RAM | ||
| 422 | */ | ||
| 423 | unsigned short tm_base; /* RISC timer table base adr */ | ||
| 424 | unsigned short tm_ptr; /* RISC timer table pointer */ | ||
| 425 | unsigned short r_tmr; /* RISC timer mode register */ | ||
| 426 | unsigned short r_tmv; /* RISC timer valid register */ | ||
| 427 | unsigned long tm_cmd; /* RISC timer cmd register */ | ||
| 428 | unsigned long tm_cnt; /* RISC timer internal cnt */ | ||
| 429 | }; | ||
| 430 | |||
| 431 | #endif | ||
diff --git a/arch/m68knommu/include/asm/m68360_quicc.h b/arch/m68knommu/include/asm/m68360_quicc.h deleted file mode 100644 index 6d40f4d18e10..000000000000 --- a/arch/m68knommu/include/asm/m68360_quicc.h +++ /dev/null | |||
| @@ -1,362 +0,0 @@ | |||
| 1 | /*********************************** | ||
| 2 | * $Id: m68360_quicc.h,v 1.1 2002/03/02 15:01:07 gerg Exp $ | ||
| 3 | *********************************** | ||
| 4 | * | ||
| 5 | *************************************** | ||
| 6 | * Definitions of QUICC memory structures | ||
| 7 | *************************************** | ||
| 8 | */ | ||
| 9 | |||
| 10 | #ifndef __M68360_QUICC_H | ||
| 11 | #define __M68360_QUICC_H | ||
| 12 | |||
| 13 | /* | ||
| 14 | * include registers and | ||
| 15 | * parameter ram definitions files | ||
| 16 | */ | ||
| 17 | #include <asm/m68360_regs.h> | ||
| 18 | #include <asm/m68360_pram.h> | ||
| 19 | |||
| 20 | |||
| 21 | |||
| 22 | /* Buffer Descriptors */ | ||
| 23 | typedef struct quicc_bd { | ||
| 24 | volatile unsigned short status; | ||
| 25 | volatile unsigned short length; | ||
| 26 | volatile unsigned char *buf; /* WARNING: This is only true if *char is 32 bits */ | ||
| 27 | } QUICC_BD; | ||
| 28 | |||
| 29 | |||
| 30 | #ifdef MOTOROLA_ORIGINAL | ||
| 31 | struct user_data { | ||
| 32 | /* BASE + 0x000: user data memory */ | ||
| 33 | volatile unsigned char udata_bd_ucode[0x400]; /*user data bd's Ucode*/ | ||
| 34 | volatile unsigned char udata_bd[0x200]; /*user data Ucode */ | ||
| 35 | volatile unsigned char ucode_ext[0x100]; /*Ucode Extention ram */ | ||
| 36 | volatile unsigned char RESERVED1[0x500]; /* Reserved area */ | ||
| 37 | }; | ||
| 38 | #else | ||
| 39 | struct user_data { | ||
| 40 | /* BASE + 0x000: user data memory */ | ||
| 41 | volatile unsigned char udata_bd_ucode[0x400]; /* user data, bds, Ucode*/ | ||
| 42 | volatile unsigned char udata_bd1[0x200]; /* user, bds */ | ||
| 43 | volatile unsigned char ucode_bd_scratch[0x100]; /* user, bds, ucode scratch */ | ||
| 44 | volatile unsigned char udata_bd2[0x100]; /* user, bds */ | ||
| 45 | volatile unsigned char RESERVED1[0x400]; /* Reserved area */ | ||
| 46 | }; | ||
| 47 | #endif | ||
| 48 | |||
| 49 | |||
| 50 | /* | ||
| 51 | * internal ram | ||
| 52 | */ | ||
| 53 | typedef struct quicc { | ||
| 54 | union { | ||
| 55 | struct quicc32_pram ch_pram_tbl[32]; /* 32*64(bytes) per channel */ | ||
| 56 | struct user_data u; | ||
| 57 | }ch_or_u; /* multipul or user space */ | ||
| 58 | |||
| 59 | /* BASE + 0xc00: PARAMETER RAM */ | ||
| 60 | union { | ||
| 61 | struct scc_pram { | ||
| 62 | union { | ||
| 63 | struct hdlc_pram h; | ||
| 64 | struct uart_pram u; | ||
| 65 | struct bisync_pram b; | ||
| 66 | struct transparent_pram t; | ||
| 67 | unsigned char RESERVED66[0x70]; | ||
| 68 | } pscc; /* scc parameter area (protocol dependent) */ | ||
| 69 | union { | ||
| 70 | struct { | ||
| 71 | unsigned char RESERVED70[0x10]; | ||
| 72 | struct spi_pram spi; | ||
| 73 | unsigned char RESERVED72[0x8]; | ||
| 74 | struct timer_pram timer; | ||
| 75 | } timer_spi; | ||
| 76 | struct { | ||
| 77 | struct idma_pram idma; | ||
| 78 | unsigned char RESERVED67[0x4]; | ||
| 79 | union { | ||
| 80 | struct smc_uart_pram u; | ||
| 81 | struct smc_trnsp_pram t; | ||
| 82 | } psmc; | ||
| 83 | } idma_smc; | ||
| 84 | } pothers; | ||
| 85 | } scc; | ||
| 86 | struct ethernet_pram enet_scc; | ||
| 87 | struct global_multi_pram m; | ||
| 88 | unsigned char pr[0x100]; | ||
| 89 | } pram[4]; | ||
| 90 | |||
| 91 | /* reserved */ | ||
| 92 | |||
| 93 | /* BASE + 0x1000: INTERNAL REGISTERS */ | ||
| 94 | /* SIM */ | ||
| 95 | volatile unsigned long sim_mcr; /* module configuration reg */ | ||
| 96 | volatile unsigned short sim_simtr; /* module test register */ | ||
| 97 | volatile unsigned char RESERVED2[0x2]; /* Reserved area */ | ||
| 98 | volatile unsigned char sim_avr; /* auto vector reg */ | ||
| 99 | volatile unsigned char sim_rsr; /* reset status reg */ | ||
| 100 | volatile unsigned char RESERVED3[0x2]; /* Reserved area */ | ||
| 101 | volatile unsigned char sim_clkocr; /* CLCO control register */ | ||
| 102 | volatile unsigned char RESERVED62[0x3]; /* Reserved area */ | ||
| 103 | volatile unsigned short sim_pllcr; /* PLL control register */ | ||
| 104 | volatile unsigned char RESERVED63[0x2]; /* Reserved area */ | ||
| 105 | volatile unsigned short sim_cdvcr; /* Clock devider control register */ | ||
| 106 | volatile unsigned short sim_pepar; /* Port E pin assignment register */ | ||
| 107 | volatile unsigned char RESERVED64[0xa]; /* Reserved area */ | ||
| 108 | volatile unsigned char sim_sypcr; /* system protection control*/ | ||
| 109 | volatile unsigned char sim_swiv; /* software interrupt vector*/ | ||
| 110 | volatile unsigned char RESERVED6[0x2]; /* Reserved area */ | ||
| 111 | volatile unsigned short sim_picr; /* periodic interrupt control reg */ | ||
| 112 | volatile unsigned char RESERVED7[0x2]; /* Reserved area */ | ||
| 113 | volatile unsigned short sim_pitr; /* periodic interrupt timing reg */ | ||
| 114 | volatile unsigned char RESERVED8[0x3]; /* Reserved area */ | ||
| 115 | volatile unsigned char sim_swsr; /* software service */ | ||
| 116 | volatile unsigned long sim_bkar; /* breakpoint address register*/ | ||
| 117 | volatile unsigned long sim_bkcr; /* breakpoint control register*/ | ||
| 118 | volatile unsigned char RESERVED10[0x8]; /* Reserved area */ | ||
| 119 | /* MEMC */ | ||
| 120 | volatile unsigned long memc_gmr; /* Global memory register */ | ||
| 121 | volatile unsigned short memc_mstat; /* MEMC status register */ | ||
| 122 | volatile unsigned char RESERVED11[0xa]; /* Reserved area */ | ||
| 123 | volatile unsigned long memc_br0; /* base register 0 */ | ||
| 124 | volatile unsigned long memc_or0; /* option register 0 */ | ||
| 125 | volatile unsigned char RESERVED12[0x8]; /* Reserved area */ | ||
| 126 | volatile unsigned long memc_br1; /* base register 1 */ | ||
| 127 | volatile unsigned long memc_or1; /* option register 1 */ | ||
| 128 | volatile unsigned char RESERVED13[0x8]; /* Reserved area */ | ||
| 129 | volatile unsigned long memc_br2; /* base register 2 */ | ||
| 130 | volatile unsigned long memc_or2; /* option register 2 */ | ||
| 131 | volatile unsigned char RESERVED14[0x8]; /* Reserved area */ | ||
| 132 | volatile unsigned long memc_br3; /* base register 3 */ | ||
| 133 | volatile unsigned long memc_or3; /* option register 3 */ | ||
| 134 | volatile unsigned char RESERVED15[0x8]; /* Reserved area */ | ||
| 135 | volatile unsigned long memc_br4; /* base register 3 */ | ||
| 136 | volatile unsigned long memc_or4; /* option register 3 */ | ||
| 137 | volatile unsigned char RESERVED16[0x8]; /* Reserved area */ | ||
| 138 | volatile unsigned long memc_br5; /* base register 3 */ | ||
| 139 | volatile unsigned long memc_or5; /* option register 3 */ | ||
| 140 | volatile unsigned char RESERVED17[0x8]; /* Reserved area */ | ||
| 141 | volatile unsigned long memc_br6; /* base register 3 */ | ||
| 142 | volatile unsigned long memc_or6; /* option register 3 */ | ||
| 143 | volatile unsigned char RESERVED18[0x8]; /* Reserved area */ | ||
| 144 | volatile unsigned long memc_br7; /* base register 3 */ | ||
| 145 | volatile unsigned long memc_or7; /* option register 3 */ | ||
| 146 | volatile unsigned char RESERVED9[0x28]; /* Reserved area */ | ||
| 147 | /* TEST */ | ||
| 148 | volatile unsigned short test_tstmra; /* master shift a */ | ||
| 149 | volatile unsigned short test_tstmrb; /* master shift b */ | ||
| 150 | volatile unsigned short test_tstsc; /* shift count */ | ||
| 151 | volatile unsigned short test_tstrc; /* repetition counter */ | ||
| 152 | volatile unsigned short test_creg; /* control */ | ||
| 153 | volatile unsigned short test_dreg; /* destributed register */ | ||
| 154 | volatile unsigned char RESERVED58[0x404]; /* Reserved area */ | ||
| 155 | /* IDMA1 */ | ||
| 156 | volatile unsigned short idma_iccr; /* channel configuration reg*/ | ||
| 157 | volatile unsigned char RESERVED19[0x2]; /* Reserved area */ | ||
| 158 | volatile unsigned short idma1_cmr; /* dma mode reg */ | ||
| 159 | volatile unsigned char RESERVED68[0x2]; /* Reserved area */ | ||
| 160 | volatile unsigned long idma1_sapr; /* dma source addr ptr */ | ||
| 161 | volatile unsigned long idma1_dapr; /* dma destination addr ptr */ | ||
| 162 | volatile unsigned long idma1_bcr; /* dma byte count reg */ | ||
| 163 | volatile unsigned char idma1_fcr; /* function code reg */ | ||
| 164 | volatile unsigned char RESERVED20; /* Reserved area */ | ||
| 165 | volatile unsigned char idma1_cmar; /* channel mask reg */ | ||
| 166 | volatile unsigned char RESERVED21; /* Reserved area */ | ||
| 167 | volatile unsigned char idma1_csr; /* channel status reg */ | ||
| 168 | volatile unsigned char RESERVED22[0x3]; /* Reserved area */ | ||
| 169 | /* SDMA */ | ||
| 170 | volatile unsigned char sdma_sdsr; /* status reg */ | ||
| 171 | volatile unsigned char RESERVED23; /* Reserved area */ | ||
| 172 | volatile unsigned short sdma_sdcr; /* configuration reg */ | ||
| 173 | volatile unsigned long sdma_sdar; /* address reg */ | ||
| 174 | /* IDMA2 */ | ||
| 175 | volatile unsigned char RESERVED69[0x2]; /* Reserved area */ | ||
| 176 | volatile unsigned short idma2_cmr; /* dma mode reg */ | ||
| 177 | volatile unsigned long idma2_sapr; /* dma source addr ptr */ | ||
| 178 | volatile unsigned long idma2_dapr; /* dma destination addr ptr */ | ||
| 179 | volatile unsigned long idma2_bcr; /* dma byte count reg */ | ||
| 180 | volatile unsigned char idma2_fcr; /* function code reg */ | ||
| 181 | volatile unsigned char RESERVED24; /* Reserved area */ | ||
| 182 | volatile unsigned char idma2_cmar; /* channel mask reg */ | ||
| 183 | volatile unsigned char RESERVED25; /* Reserved area */ | ||
| 184 | volatile unsigned char idma2_csr; /* channel status reg */ | ||
| 185 | volatile unsigned char RESERVED26[0x7]; /* Reserved area */ | ||
| 186 | /* Interrupt Controller */ | ||
| 187 | volatile unsigned long intr_cicr; /* CP interrupt configuration reg*/ | ||
| 188 | volatile unsigned long intr_cipr; /* CP interrupt pending reg */ | ||
| 189 | volatile unsigned long intr_cimr; /* CP interrupt mask reg */ | ||
| 190 | volatile unsigned long intr_cisr; /* CP interrupt in service reg*/ | ||
| 191 | /* Parallel I/O */ | ||
| 192 | volatile unsigned short pio_padir; /* port A data direction reg */ | ||
| 193 | volatile unsigned short pio_papar; /* port A pin assignment reg */ | ||
| 194 | volatile unsigned short pio_paodr; /* port A open drain reg */ | ||
| 195 | volatile unsigned short pio_padat; /* port A data register */ | ||
| 196 | volatile unsigned char RESERVED28[0x8]; /* Reserved area */ | ||
| 197 | volatile unsigned short pio_pcdir; /* port C data direction reg*/ | ||
| 198 | volatile unsigned short pio_pcpar; /* port C pin assignment reg*/ | ||
| 199 | volatile unsigned short pio_pcso; /* port C special options */ | ||
| 200 | volatile unsigned short pio_pcdat; /* port C data register */ | ||
| 201 | volatile unsigned short pio_pcint; /* port C interrupt cntrl reg */ | ||
| 202 | volatile unsigned char RESERVED29[0x16]; /* Reserved area */ | ||
| 203 | /* Timer */ | ||
| 204 | volatile unsigned short timer_tgcr; /* timer global configuration reg */ | ||
| 205 | volatile unsigned char RESERVED30[0xe]; /* Reserved area */ | ||
| 206 | volatile unsigned short timer_tmr1; /* timer 1 mode reg */ | ||
| 207 | volatile unsigned short timer_tmr2; /* timer 2 mode reg */ | ||
| 208 | volatile unsigned short timer_trr1; /* timer 1 referance reg */ | ||
| 209 | volatile unsigned short timer_trr2; /* timer 2 referance reg */ | ||
| 210 | volatile unsigned short timer_tcr1; /* timer 1 capture reg */ | ||
| 211 | volatile unsigned short timer_tcr2; /* timer 2 capture reg */ | ||
| 212 | volatile unsigned short timer_tcn1; /* timer 1 counter reg */ | ||
| 213 | volatile unsigned short timer_tcn2; /* timer 2 counter reg */ | ||
| 214 | volatile unsigned short timer_tmr3; /* timer 3 mode reg */ | ||
| 215 | volatile unsigned short timer_tmr4; /* timer 4 mode reg */ | ||
| 216 | volatile unsigned short timer_trr3; /* timer 3 referance reg */ | ||
| 217 | volatile unsigned short timer_trr4; /* timer 4 referance reg */ | ||
| 218 | volatile unsigned short timer_tcr3; /* timer 3 capture reg */ | ||
| 219 | volatile unsigned short timer_tcr4; /* timer 4 capture reg */ | ||
| 220 | volatile unsigned short timer_tcn3; /* timer 3 counter reg */ | ||
| 221 | volatile unsigned short timer_tcn4; /* timer 4 counter reg */ | ||
| 222 | volatile unsigned short timer_ter1; /* timer 1 event reg */ | ||
| 223 | volatile unsigned short timer_ter2; /* timer 2 event reg */ | ||
| 224 | volatile unsigned short timer_ter3; /* timer 3 event reg */ | ||
| 225 | volatile unsigned short timer_ter4; /* timer 4 event reg */ | ||
| 226 | volatile unsigned char RESERVED34[0x8]; /* Reserved area */ | ||
| 227 | /* CP */ | ||
| 228 | volatile unsigned short cp_cr; /* command register */ | ||
| 229 | volatile unsigned char RESERVED35[0x2]; /* Reserved area */ | ||
| 230 | volatile unsigned short cp_rccr; /* main configuration reg */ | ||
| 231 | volatile unsigned char RESERVED37; /* Reserved area */ | ||
| 232 | volatile unsigned char cp_rmds; /* development support status reg */ | ||
| 233 | volatile unsigned long cp_rmdr; /* development support control reg */ | ||
| 234 | volatile unsigned short cp_rctr1; /* ram break register 1 */ | ||
| 235 | volatile unsigned short cp_rctr2; /* ram break register 2 */ | ||
| 236 | volatile unsigned short cp_rctr3; /* ram break register 3 */ | ||
| 237 | volatile unsigned short cp_rctr4; /* ram break register 4 */ | ||
| 238 | volatile unsigned char RESERVED59[0x2]; /* Reserved area */ | ||
| 239 | volatile unsigned short cp_rter; /* RISC timers event reg */ | ||
| 240 | volatile unsigned char RESERVED38[0x2]; /* Reserved area */ | ||
| 241 | volatile unsigned short cp_rtmr; /* RISC timers mask reg */ | ||
| 242 | volatile unsigned char RESERVED39[0x14]; /* Reserved area */ | ||
| 243 | /* BRG */ | ||
| 244 | union { | ||
| 245 | volatile unsigned long l; | ||
| 246 | struct { | ||
| 247 | volatile unsigned short BRGC_RESERV:14; | ||
| 248 | volatile unsigned short rst:1; | ||
| 249 | volatile unsigned short en:1; | ||
| 250 | volatile unsigned short extc:2; | ||
| 251 | volatile unsigned short atb:1; | ||
| 252 | volatile unsigned short cd:12; | ||
| 253 | volatile unsigned short div16:1; | ||
| 254 | } b; | ||
| 255 | } brgc[4]; /* BRG1-BRG4 configuration regs*/ | ||
| 256 | /* SCC registers */ | ||
| 257 | struct scc_regs { | ||
| 258 | union { | ||
| 259 | struct { | ||
| 260 | /* Low word. */ | ||
| 261 | volatile unsigned short GSMR_RESERV2:1; | ||
| 262 | volatile unsigned short edge:2; | ||
| 263 | volatile unsigned short tci:1; | ||
| 264 | volatile unsigned short tsnc:2; | ||
| 265 | volatile unsigned short rinv:1; | ||
| 266 | volatile unsigned short tinv:1; | ||
| 267 | volatile unsigned short tpl:3; | ||
| 268 | volatile unsigned short tpp:2; | ||
| 269 | volatile unsigned short tend:1; | ||
| 270 | volatile unsigned short tdcr:2; | ||
| 271 | volatile unsigned short rdcr:2; | ||
| 272 | volatile unsigned short renc:3; | ||
| 273 | volatile unsigned short tenc:3; | ||
| 274 | volatile unsigned short diag:2; | ||
| 275 | volatile unsigned short enr:1; | ||
| 276 | volatile unsigned short ent:1; | ||
| 277 | volatile unsigned short mode:4; | ||
| 278 | /* High word. */ | ||
| 279 | volatile unsigned short GSMR_RESERV1:14; | ||
| 280 | volatile unsigned short pri:1; | ||
| 281 | volatile unsigned short gde:1; | ||
| 282 | volatile unsigned short tcrc:2; | ||
| 283 | volatile unsigned short revd:1; | ||
| 284 | volatile unsigned short trx:1; | ||
| 285 | volatile unsigned short ttx:1; | ||
| 286 | volatile unsigned short cdp:1; | ||
| 287 | volatile unsigned short ctsp:1; | ||
| 288 | volatile unsigned short cds:1; | ||
| 289 | volatile unsigned short ctss:1; | ||
| 290 | volatile unsigned short tfl:1; | ||
| 291 | volatile unsigned short rfw:1; | ||
| 292 | volatile unsigned short txsy:1; | ||
| 293 | volatile unsigned short synl:2; | ||
| 294 | volatile unsigned short rtsm:1; | ||
| 295 | volatile unsigned short rsyn:1; | ||
| 296 | } b; | ||
| 297 | struct { | ||
| 298 | volatile unsigned long low; | ||
| 299 | volatile unsigned long high; | ||
| 300 | } w; | ||
| 301 | } scc_gsmr; /* SCC general mode reg */ | ||
| 302 | volatile unsigned short scc_psmr; /* protocol specific mode reg */ | ||
| 303 | volatile unsigned char RESERVED42[0x2]; /* Reserved area */ | ||
| 304 | volatile unsigned short scc_todr; /* SCC transmit on demand */ | ||
| 305 | volatile unsigned short scc_dsr; /* SCC data sync reg */ | ||
| 306 | volatile unsigned short scc_scce; /* SCC event reg */ | ||
| 307 | volatile unsigned char RESERVED43[0x2];/* Reserved area */ | ||
| 308 | volatile unsigned short scc_sccm; /* SCC mask reg */ | ||
| 309 | volatile unsigned char RESERVED44[0x1];/* Reserved area */ | ||
| 310 | volatile unsigned char scc_sccs; /* SCC status reg */ | ||
| 311 | volatile unsigned char RESERVED45[0x8]; /* Reserved area */ | ||
| 312 | } scc_regs[4]; | ||
| 313 | /* SMC */ | ||
| 314 | struct smc_regs { | ||
| 315 | volatile unsigned char RESERVED46[0x2]; /* Reserved area */ | ||
| 316 | volatile unsigned short smc_smcmr; /* SMC mode reg */ | ||
| 317 | volatile unsigned char RESERVED60[0x2]; /* Reserved area */ | ||
| 318 | volatile unsigned char smc_smce; /* SMC event reg */ | ||
| 319 | volatile unsigned char RESERVED47[0x3]; /* Reserved area */ | ||
| 320 | volatile unsigned char smc_smcm; /* SMC mask reg */ | ||
| 321 | volatile unsigned char RESERVED48[0x5]; /* Reserved area */ | ||
| 322 | } smc_regs[2]; | ||
| 323 | /* SPI */ | ||
| 324 | volatile unsigned short spi_spmode; /* SPI mode reg */ | ||
| 325 | volatile unsigned char RESERVED51[0x4]; /* Reserved area */ | ||
| 326 | volatile unsigned char spi_spie; /* SPI event reg */ | ||
| 327 | volatile unsigned char RESERVED52[0x3]; /* Reserved area */ | ||
| 328 | volatile unsigned char spi_spim; /* SPI mask reg */ | ||
| 329 | volatile unsigned char RESERVED53[0x2]; /* Reserved area */ | ||
| 330 | volatile unsigned char spi_spcom; /* SPI command reg */ | ||
| 331 | volatile unsigned char RESERVED54[0x4]; /* Reserved area */ | ||
| 332 | /* PIP */ | ||
| 333 | volatile unsigned short pip_pipc; /* pip configuration reg */ | ||
| 334 | volatile unsigned char RESERVED65[0x2]; /* Reserved area */ | ||
| 335 | volatile unsigned short pip_ptpr; /* pip timing parameters reg */ | ||
| 336 | volatile unsigned long pip_pbdir; /* port b data direction reg */ | ||
| 337 | volatile unsigned long pip_pbpar; /* port b pin assignment reg */ | ||
| 338 | volatile unsigned long pip_pbodr; /* port b open drain reg */ | ||
| 339 | volatile unsigned long pip_pbdat; /* port b data reg */ | ||
| 340 | volatile unsigned char RESERVED71[0x18]; /* Reserved area */ | ||
| 341 | /* Serial Interface */ | ||
| 342 | volatile unsigned long si_simode; /* SI mode register */ | ||
| 343 | volatile unsigned char si_sigmr; /* SI global mode register */ | ||
| 344 | volatile unsigned char RESERVED55; /* Reserved area */ | ||
| 345 | volatile unsigned char si_sistr; /* SI status register */ | ||
| 346 | volatile unsigned char si_sicmr; /* SI command register */ | ||
| 347 | volatile unsigned char RESERVED56[0x4]; /* Reserved area */ | ||
| 348 | volatile unsigned long si_sicr; /* SI clock routing */ | ||
| 349 | volatile unsigned long si_sirp; /* SI ram pointers */ | ||
| 350 | volatile unsigned char RESERVED57[0xc]; /* Reserved area */ | ||
| 351 | volatile unsigned short si_siram[0x80]; /* SI routing ram */ | ||
| 352 | } QUICC; | ||
| 353 | |||
| 354 | #endif | ||
| 355 | |||
| 356 | /* | ||
| 357 | * Local variables: | ||
| 358 | * c-indent-level: 4 | ||
| 359 | * c-basic-offset: 4 | ||
| 360 | * tab-width: 4 | ||
| 361 | * End: | ||
| 362 | */ | ||
diff --git a/arch/m68knommu/include/asm/m68360_regs.h b/arch/m68knommu/include/asm/m68360_regs.h deleted file mode 100644 index d57217ca4f27..000000000000 --- a/arch/m68knommu/include/asm/m68360_regs.h +++ /dev/null | |||
| @@ -1,408 +0,0 @@ | |||
| 1 | /*********************************** | ||
| 2 | * $Id: m68360_regs.h,v 1.2 2002/10/26 15:03:55 gerg Exp $ | ||
| 3 | *********************************** | ||
| 4 | * | ||
| 5 | *************************************** | ||
| 6 | * Definitions of the QUICC registers | ||
| 7 | *************************************** | ||
| 8 | */ | ||
| 9 | |||
| 10 | #ifndef __REGISTERS_H | ||
| 11 | #define __REGISTERS_H | ||
| 12 | |||
| 13 | #define CLEAR_BIT(x, bit) x =bit | ||
| 14 | |||
| 15 | /***************************************************************** | ||
| 16 | Command Register | ||
| 17 | *****************************************************************/ | ||
| 18 | |||
| 19 | /* bit fields within command register */ | ||
| 20 | #define SOFTWARE_RESET 0x8000 | ||
| 21 | #define CMD_OPCODE 0x0f00 | ||
| 22 | #define CMD_CHANNEL 0x00f0 | ||
| 23 | #define CMD_FLAG 0x0001 | ||
| 24 | |||
| 25 | /* general command opcodes */ | ||
| 26 | #define INIT_RXTX_PARAMS 0x0000 | ||
| 27 | #define INIT_RX_PARAMS 0x0100 | ||
| 28 | #define INIT_TX_PARAMS 0x0200 | ||
| 29 | #define ENTER_HUNT_MODE 0x0300 | ||
| 30 | #define STOP_TX 0x0400 | ||
| 31 | #define GR_STOP_TX 0x0500 | ||
| 32 | #define RESTART_TX 0x0600 | ||
| 33 | #define CLOSE_RX_BD 0x0700 | ||
| 34 | #define SET_ENET_GROUP 0x0800 | ||
| 35 | #define RESET_ENET_GROUP 0x0900 | ||
| 36 | |||
| 37 | /* quicc32 CP commands */ | ||
| 38 | #define STOP_TX_32 0x0e00 /*add chan# bits 2-6 */ | ||
| 39 | #define ENTER_HUNT_MODE_32 0x1e00 | ||
| 40 | |||
| 41 | /* quicc32 mask/event SCC register */ | ||
| 42 | #define GOV 0x01 | ||
| 43 | #define GUN 0x02 | ||
| 44 | #define GINT 0x04 | ||
| 45 | #define IQOV 0x08 | ||
| 46 | |||
| 47 | |||
| 48 | /* Timer commands */ | ||
| 49 | #define SET_TIMER 0x0800 | ||
| 50 | |||
| 51 | /* Multi channel Interrupt structure */ | ||
| 52 | #define INTR_VALID 0x8000 /* Valid interrupt entry */ | ||
| 53 | #define INTR_WRAP 0x4000 /* Wrap bit in the interrupt entry table */ | ||
| 54 | #define INTR_CH_NU 0x07c0 /* Channel Num in interrupt table */ | ||
| 55 | #define INTR_MASK_BITS 0x383f | ||
| 56 | |||
| 57 | /* | ||
| 58 | * General SCC mode register (GSMR) | ||
| 59 | */ | ||
| 60 | |||
| 61 | #define MODE_HDLC 0x0 | ||
| 62 | #define MODE_APPLE_TALK 0x2 | ||
| 63 | #define MODE_SS7 0x3 | ||
| 64 | #define MODE_UART 0x4 | ||
| 65 | #define MODE_PROFIBUS 0x5 | ||
| 66 | #define MODE_ASYNC_HDLC 0x6 | ||
| 67 | #define MODE_V14 0x7 | ||
| 68 | #define MODE_BISYNC 0x8 | ||
| 69 | #define MODE_DDCMP 0x9 | ||
| 70 | #define MODE_MULTI_CHANNEL 0xa | ||
| 71 | #define MODE_ETHERNET 0xc | ||
| 72 | |||
| 73 | #define DIAG_NORMAL 0x0 | ||
| 74 | #define DIAG_LOCAL_LPB 0x1 | ||
| 75 | #define DIAG_AUTO_ECHO 0x2 | ||
| 76 | #define DIAG_LBP_ECHO 0x3 | ||
| 77 | |||
| 78 | /* For RENC and TENC fields in GSMR */ | ||
| 79 | #define ENC_NRZ 0x0 | ||
| 80 | #define ENC_NRZI 0x1 | ||
| 81 | #define ENC_FM0 0x2 | ||
| 82 | #define ENC_MANCH 0x4 | ||
| 83 | #define ENC_DIFF_MANC 0x6 | ||
| 84 | |||
| 85 | /* For TDCR and RDCR fields in GSMR */ | ||
| 86 | #define CLOCK_RATE_1 0x0 | ||
| 87 | #define CLOCK_RATE_8 0x1 | ||
| 88 | #define CLOCK_RATE_16 0x2 | ||
| 89 | #define CLOCK_RATE_32 0x3 | ||
| 90 | |||
| 91 | #define TPP_00 0x0 | ||
| 92 | #define TPP_10 0x1 | ||
| 93 | #define TPP_01 0x2 | ||
| 94 | #define TPP_11 0x3 | ||
| 95 | |||
| 96 | #define TPL_NO 0x0 | ||
| 97 | #define TPL_8 0x1 | ||
| 98 | #define TPL_16 0x2 | ||
| 99 | #define TPL_32 0x3 | ||
| 100 | #define TPL_48 0x4 | ||
| 101 | #define TPL_64 0x5 | ||
| 102 | #define TPL_128 0x6 | ||
| 103 | |||
| 104 | #define TSNC_INFINITE 0x0 | ||
| 105 | #define TSNC_14_65 0x1 | ||
| 106 | #define TSNC_4_15 0x2 | ||
| 107 | #define TSNC_3_1 0x3 | ||
| 108 | |||
| 109 | #define EDGE_BOTH 0x0 | ||
| 110 | #define EDGE_POS 0x1 | ||
| 111 | #define EDGE_NEG 0x2 | ||
| 112 | #define EDGE_NO 0x3 | ||
| 113 | |||
| 114 | #define SYNL_NO 0x0 | ||
| 115 | #define SYNL_4 0x1 | ||
| 116 | #define SYNL_8 0x2 | ||
| 117 | #define SYNL_16 0x3 | ||
| 118 | |||
| 119 | #define TCRC_CCITT16 0x0 | ||
| 120 | #define TCRC_CRC16 0x1 | ||
| 121 | #define TCRC_CCITT32 0x2 | ||
| 122 | |||
| 123 | |||
| 124 | /***************************************************************** | ||
| 125 | TODR (Transmit on demand) Register | ||
| 126 | *****************************************************************/ | ||
| 127 | #define TODR_TOD 0x8000 /* Transmit on demand */ | ||
| 128 | |||
| 129 | |||
| 130 | /***************************************************************** | ||
| 131 | CICR register settings | ||
| 132 | *****************************************************************/ | ||
| 133 | |||
| 134 | /* note that relative irq priorities of the SCCs can be reordered | ||
| 135 | * if desired - see p. 7-377 of the MC68360UM */ | ||
| 136 | #define CICR_SCA_SCC1 ((uint)0x00000000) /* SCC1 @ SCCa */ | ||
| 137 | #define CICR_SCB_SCC2 ((uint)0x00040000) /* SCC2 @ SCCb */ | ||
| 138 | #define CICR_SCC_SCC3 ((uint)0x00200000) /* SCC3 @ SCCc */ | ||
| 139 | #define CICR_SCD_SCC4 ((uint)0x00c00000) /* SCC4 @ SCCd */ | ||
| 140 | |||
| 141 | #define CICR_IRL_MASK ((uint)0x0000e000) /* Core interrupt */ | ||
| 142 | #define CICR_HP_MASK ((uint)0x00001f00) /* Hi-pri int. */ | ||
| 143 | #define CICR_VBA_MASK ((uint)0x000000e0) /* Vector Base Address */ | ||
| 144 | #define CICR_SPS ((uint)0x00000001) /* SCC Spread */ | ||
| 145 | |||
| 146 | |||
| 147 | /***************************************************************** | ||
| 148 | Interrupt bits for CIPR and CIMR (MC68360UM p. 7-379) | ||
| 149 | *****************************************************************/ | ||
| 150 | |||
| 151 | #define INTR_PIO_PC0 0x80000000 /* parallel I/O C bit 0 */ | ||
| 152 | #define INTR_SCC1 0x40000000 /* SCC port 1 */ | ||
| 153 | #define INTR_SCC2 0x20000000 /* SCC port 2 */ | ||
| 154 | #define INTR_SCC3 0x10000000 /* SCC port 3 */ | ||
| 155 | #define INTR_SCC4 0x08000000 /* SCC port 4 */ | ||
| 156 | #define INTR_PIO_PC1 0x04000000 /* parallel i/o C bit 1 */ | ||
| 157 | #define INTR_TIMER1 0x02000000 /* timer 1 */ | ||
| 158 | #define INTR_PIO_PC2 0x01000000 /* parallel i/o C bit 2 */ | ||
| 159 | #define INTR_PIO_PC3 0x00800000 /* parallel i/o C bit 3 */ | ||
| 160 | #define INTR_SDMA_BERR 0x00400000 /* SDMA channel bus error */ | ||
| 161 | #define INTR_DMA1 0x00200000 /* idma 1 */ | ||
| 162 | #define INTR_DMA2 0x00100000 /* idma 2 */ | ||
| 163 | #define INTR_TIMER2 0x00040000 /* timer 2 */ | ||
| 164 | #define INTR_CP_TIMER 0x00020000 /* CP timer */ | ||
| 165 | #define INTR_PIP_STATUS 0x00010000 /* PIP status */ | ||
| 166 | #define INTR_PIO_PC4 0x00008000 /* parallel i/o C bit 4 */ | ||
| 167 | #define INTR_PIO_PC5 0x00004000 /* parallel i/o C bit 5 */ | ||
| 168 | #define INTR_TIMER3 0x00001000 /* timer 3 */ | ||
| 169 | #define INTR_PIO_PC6 0x00000800 /* parallel i/o C bit 6 */ | ||
| 170 | #define INTR_PIO_PC7 0x00000400 /* parallel i/o C bit 7 */ | ||
| 171 | #define INTR_PIO_PC8 0x00000200 /* parallel i/o C bit 8 */ | ||
| 172 | #define INTR_TIMER4 0x00000080 /* timer 4 */ | ||
| 173 | #define INTR_PIO_PC9 0x00000040 /* parallel i/o C bit 9 */ | ||
| 174 | #define INTR_SCP 0x00000020 /* SCP */ | ||
| 175 | #define INTR_SMC1 0x00000010 /* SMC 1 */ | ||
| 176 | #define INTR_SMC2 0x00000008 /* SMC 2 */ | ||
| 177 | #define INTR_PIO_PC10 0x00000004 /* parallel i/o C bit 10 */ | ||
| 178 | #define INTR_PIO_PC11 0x00000002 /* parallel i/o C bit 11 */ | ||
| 179 | #define INTR_ERR 0x00000001 /* error */ | ||
| 180 | |||
| 181 | |||
| 182 | /***************************************************************** | ||
| 183 | CPM Interrupt vector encodings (MC68360UM p. 7-376) | ||
| 184 | *****************************************************************/ | ||
| 185 | |||
| 186 | #define CPMVEC_NR 32 | ||
| 187 | #define CPMVEC_PIO_PC0 0x1f | ||
| 188 | #define CPMVEC_SCC1 0x1e | ||
| 189 | #define CPMVEC_SCC2 0x1d | ||
| 190 | #define CPMVEC_SCC3 0x1c | ||
| 191 | #define CPMVEC_SCC4 0x1b | ||
| 192 | #define CPMVEC_PIO_PC1 0x1a | ||
| 193 | #define CPMVEC_TIMER1 0x19 | ||
| 194 | #define CPMVEC_PIO_PC2 0x18 | ||
| 195 | #define CPMVEC_PIO_PC3 0x17 | ||
| 196 | #define CPMVEC_SDMA_CB_ERR 0x16 | ||
| 197 | #define CPMVEC_IDMA1 0x15 | ||
| 198 | #define CPMVEC_IDMA2 0x14 | ||
| 199 | #define CPMVEC_RESERVED3 0x13 | ||
| 200 | #define CPMVEC_TIMER2 0x12 | ||
| 201 | #define CPMVEC_RISCTIMER 0x11 | ||
| 202 | #define CPMVEC_RESERVED2 0x10 | ||
| 203 | #define CPMVEC_PIO_PC4 0x0f | ||
| 204 | #define CPMVEC_PIO_PC5 0x0e | ||
| 205 | #define CPMVEC_TIMER3 0x0c | ||
| 206 | #define CPMVEC_PIO_PC6 0x0b | ||
| 207 | #define CPMVEC_PIO_PC7 0x0a | ||
| 208 | #define CPMVEC_PIO_PC8 0x09 | ||
| 209 | #define CPMVEC_RESERVED1 0x08 | ||
| 210 | #define CPMVEC_TIMER4 0x07 | ||
| 211 | #define CPMVEC_PIO_PC9 0x06 | ||
| 212 | #define CPMVEC_SPI 0x05 | ||
| 213 | #define CPMVEC_SMC1 0x04 | ||
| 214 | #define CPMVEC_SMC2 0x03 | ||
| 215 | #define CPMVEC_PIO_PC10 0x02 | ||
| 216 | #define CPMVEC_PIO_PC11 0x01 | ||
| 217 | #define CPMVEC_ERROR 0x00 | ||
| 218 | |||
| 219 | /* #define CPMVEC_PIO_PC0 ((ushort)0x1f) */ | ||
| 220 | /* #define CPMVEC_SCC1 ((ushort)0x1e) */ | ||
| 221 | /* #define CPMVEC_SCC2 ((ushort)0x1d) */ | ||
| 222 | /* #define CPMVEC_SCC3 ((ushort)0x1c) */ | ||
| 223 | /* #define CPMVEC_SCC4 ((ushort)0x1b) */ | ||
| 224 | /* #define CPMVEC_PIO_PC1 ((ushort)0x1a) */ | ||
| 225 | /* #define CPMVEC_TIMER1 ((ushort)0x19) */ | ||
| 226 | /* #define CPMVEC_PIO_PC2 ((ushort)0x18) */ | ||
| 227 | /* #define CPMVEC_PIO_PC3 ((ushort)0x17) */ | ||
| 228 | /* #define CPMVEC_SDMA_CB_ERR ((ushort)0x16) */ | ||
| 229 | /* #define CPMVEC_IDMA1 ((ushort)0x15) */ | ||
| 230 | /* #define CPMVEC_IDMA2 ((ushort)0x14) */ | ||
| 231 | /* #define CPMVEC_RESERVED3 ((ushort)0x13) */ | ||
| 232 | /* #define CPMVEC_TIMER2 ((ushort)0x12) */ | ||
| 233 | /* #define CPMVEC_RISCTIMER ((ushort)0x11) */ | ||
| 234 | /* #define CPMVEC_RESERVED2 ((ushort)0x10) */ | ||
| 235 | /* #define CPMVEC_PIO_PC4 ((ushort)0x0f) */ | ||
| 236 | /* #define CPMVEC_PIO_PC5 ((ushort)0x0e) */ | ||
| 237 | /* #define CPMVEC_TIMER3 ((ushort)0x0c) */ | ||
| 238 | /* #define CPMVEC_PIO_PC6 ((ushort)0x0b) */ | ||
| 239 | /* #define CPMVEC_PIO_PC7 ((ushort)0x0a) */ | ||
| 240 | /* #define CPMVEC_PIO_PC8 ((ushort)0x09) */ | ||
| 241 | /* #define CPMVEC_RESERVED1 ((ushort)0x08) */ | ||
| 242 | /* #define CPMVEC_TIMER4 ((ushort)0x07) */ | ||
| 243 | /* #define CPMVEC_PIO_PC9 ((ushort)0x06) */ | ||
| 244 | /* #define CPMVEC_SPI ((ushort)0x05) */ | ||
| 245 | /* #define CPMVEC_SMC1 ((ushort)0x04) */ | ||
| 246 | /* #define CPMVEC_SMC2 ((ushort)0x03) */ | ||
| 247 | /* #define CPMVEC_PIO_PC10 ((ushort)0x02) */ | ||
| 248 | /* #define CPMVEC_PIO_PC11 ((ushort)0x01) */ | ||
| 249 | /* #define CPMVEC_ERROR ((ushort)0x00) */ | ||
| 250 | |||
| 251 | |||
| 252 | /***************************************************************** | ||
| 253 | * PIO control registers | ||
| 254 | *****************************************************************/ | ||
| 255 | |||
| 256 | /* Port A - See 360UM p. 7-358 | ||
| 257 | * | ||
| 258 | * Note that most of these pins have alternate functions | ||
| 259 | */ | ||
| 260 | |||
| 261 | |||
| 262 | /* The macros are nice, but there are all sorts of references to 1-indexed | ||
| 263 | * facilities on the 68360... */ | ||
| 264 | /* #define PA_RXD(n) ((ushort)(0x01<<(2*n))) */ | ||
| 265 | /* #define PA_TXD(n) ((ushort)(0x02<<(2*n))) */ | ||
| 266 | |||
| 267 | #define PA_RXD1 ((ushort)0x0001) | ||
| 268 | #define PA_TXD1 ((ushort)0x0002) | ||
| 269 | #define PA_RXD2 ((ushort)0x0004) | ||
| 270 | #define PA_TXD2 ((ushort)0x0008) | ||
| 271 | #define PA_RXD3 ((ushort)0x0010) | ||
| 272 | #define PA_TXD3 ((ushort)0x0020) | ||
| 273 | #define PA_RXD4 ((ushort)0x0040) | ||
| 274 | #define PA_TXD4 ((ushort)0x0080) | ||
| 275 | |||
| 276 | #define PA_CLK1 ((ushort)0x0100) | ||
| 277 | #define PA_CLK2 ((ushort)0x0200) | ||
| 278 | #define PA_CLK3 ((ushort)0x0400) | ||
| 279 | #define PA_CLK4 ((ushort)0x0800) | ||
| 280 | #define PA_CLK5 ((ushort)0x1000) | ||
| 281 | #define PA_CLK6 ((ushort)0x2000) | ||
| 282 | #define PA_CLK7 ((ushort)0x4000) | ||
| 283 | #define PA_CLK8 ((ushort)0x8000) | ||
| 284 | |||
| 285 | |||
| 286 | /* Port B - See 360UM p. 7-362 | ||
| 287 | */ | ||
| 288 | |||
| 289 | |||
| 290 | /* Port C - See 360UM p. 7-365 | ||
| 291 | */ | ||
| 292 | |||
| 293 | #define PC_RTS1 ((ushort)0x0001) | ||
| 294 | #define PC_RTS2 ((ushort)0x0002) | ||
| 295 | #define PC__RTS3 ((ushort)0x0004) /* !RTS3 */ | ||
| 296 | #define PC__RTS4 ((ushort)0x0008) /* !RTS4 */ | ||
| 297 | |||
| 298 | #define PC_CTS1 ((ushort)0x0010) | ||
| 299 | #define PC_CD1 ((ushort)0x0020) | ||
| 300 | #define PC_CTS2 ((ushort)0x0040) | ||
| 301 | #define PC_CD2 ((ushort)0x0080) | ||
| 302 | #define PC_CTS3 ((ushort)0x0100) | ||
| 303 | #define PC_CD3 ((ushort)0x0200) | ||
| 304 | #define PC_CTS4 ((ushort)0x0400) | ||
| 305 | #define PC_CD4 ((ushort)0x0800) | ||
| 306 | |||
| 307 | |||
| 308 | |||
| 309 | /***************************************************************** | ||
| 310 | chip select option register | ||
| 311 | *****************************************************************/ | ||
| 312 | #define DTACK 0xe000 | ||
| 313 | #define ADR_MASK 0x1ffc | ||
| 314 | #define RDWR_MASK 0x0002 | ||
| 315 | #define FC_MASK 0x0001 | ||
| 316 | |||
| 317 | /***************************************************************** | ||
| 318 | tbase and rbase registers | ||
| 319 | *****************************************************************/ | ||
| 320 | #define TBD_ADDR(quicc,pram) ((struct quicc_bd *) \ | ||
| 321 | (quicc->ch_or_u.u.udata_bd_ucode + pram->tbase)) | ||
| 322 | #define RBD_ADDR(quicc,pram) ((struct quicc_bd *) \ | ||
| 323 | (quicc->ch_or_u.u.udata_bd_ucode + pram->rbase)) | ||
| 324 | #define TBD_CUR_ADDR(quicc,pram) ((struct quicc_bd *) \ | ||
| 325 | (quicc->ch_or_u.u.udata_bd_ucode + pram->tbptr)) | ||
| 326 | #define RBD_CUR_ADDR(quicc,pram) ((struct quicc_bd *) \ | ||
| 327 | (quicc->ch_or_u.u.udata_bd_ucode + pram->rbptr)) | ||
| 328 | #define TBD_SET_CUR_ADDR(bd,quicc,pram) pram->tbptr = \ | ||
| 329 | ((unsigned short)((char *)(bd) - (char *)(quicc->ch_or_u.u.udata_bd_ucode))) | ||
| 330 | #define RBD_SET_CUR_ADDR(bd,quicc,pram) pram->rbptr = \ | ||
| 331 | ((unsigned short)((char *)(bd) - (char *)(quicc->ch_or_u.u.udata_bd_ucode))) | ||
| 332 | #define INCREASE_TBD(bd,quicc,pram) { \ | ||
| 333 | if((bd)->status & T_W) \ | ||
| 334 | (bd) = TBD_ADDR(quicc,pram); \ | ||
| 335 | else \ | ||
| 336 | (bd)++; \ | ||
| 337 | } | ||
| 338 | #define DECREASE_TBD(bd,quicc,pram) { \ | ||
| 339 | if ((bd) == TBD_ADDR(quicc, pram)) \ | ||
| 340 | while (!((bd)->status & T_W)) \ | ||
| 341 | (bd)++; \ | ||
| 342 | else \ | ||
| 343 | (bd)--; \ | ||
| 344 | } | ||
| 345 | #define INCREASE_RBD(bd,quicc,pram) { \ | ||
| 346 | if((bd)->status & R_W) \ | ||
| 347 | (bd) = RBD_ADDR(quicc,pram); \ | ||
| 348 | else \ | ||
| 349 | (bd)++; \ | ||
| 350 | } | ||
| 351 | #define DECREASE_RBD(bd,quicc,pram) { \ | ||
| 352 | if ((bd) == RBD_ADDR(quicc, pram)) \ | ||
| 353 | while (!((bd)->status & T_W)) \ | ||
| 354 | (bd)++; \ | ||
| 355 | else \ | ||
| 356 | (bd)--; \ | ||
| 357 | } | ||
| 358 | |||
| 359 | /***************************************************************** | ||
| 360 | Macros for Multi channel | ||
| 361 | *****************************************************************/ | ||
| 362 | #define QMC_BASE(quicc,page) (struct global_multi_pram *)(&quicc->pram[page]) | ||
| 363 | #define MCBASE(quicc,page) (unsigned long)(quicc->pram[page].m.mcbase) | ||
| 364 | #define CHANNEL_PRAM_BASE(quicc,channel) ((struct quicc32_pram *) \ | ||
| 365 | (&(quicc->ch_or_u.ch_pram_tbl[channel]))) | ||
| 366 | #define TBD_32_ADDR(quicc,page,channel) ((struct quicc_bd *) \ | ||
| 367 | (MCBASE(quicc,page) + (CHANNEL_PRAM_BASE(quicc,channel)->tbase))) | ||
| 368 | #define RBD_32_ADDR(quicc,page,channel) ((struct quicc_bd *) \ | ||
| 369 | (MCBASE(quicc,page) + (CHANNEL_PRAM_BASE(quicc,channel)->rbase))) | ||
| 370 | #define TBD_32_CUR_ADDR(quicc,page,channel) ((struct quicc_bd *) \ | ||
| 371 | (MCBASE(quicc,page) + (CHANNEL_PRAM_BASE(quicc,channel)->tbptr))) | ||
| 372 | #define RBD_32_CUR_ADDR(quicc,page,channel) ((struct quicc_bd *) \ | ||
| 373 | (MCBASE(quicc,page) + (CHANNEL_PRAM_BASE(quicc,channel)->rbptr))) | ||
| 374 | #define TBD_32_SET_CUR_ADDR(bd,quicc,page,channel) \ | ||
| 375 | CHANNEL_PRAM_BASE(quicc,channel)->tbptr = \ | ||
| 376 | ((unsigned short)((char *)(bd) - (char *)(MCBASE(quicc,page)))) | ||
| 377 | #define RBD_32_SET_CUR_ADDR(bd,quicc,page,channel) \ | ||
| 378 | CHANNEL_PRAM_BASE(quicc,channel)->rbptr = \ | ||
| 379 | ((unsigned short)((char *)(bd) - (char *)(MCBASE(quicc,page)))) | ||
| 380 | |||
| 381 | #define INCREASE_TBD_32(bd,quicc,page,channel) { \ | ||
| 382 | if((bd)->status & T_W) \ | ||
| 383 | (bd) = TBD_32_ADDR(quicc,page,channel); \ | ||
| 384 | else \ | ||
| 385 | (bd)++; \ | ||
| 386 | } | ||
| 387 | #define DECREASE_TBD_32(bd,quicc,page,channel) { \ | ||
| 388 | if ((bd) == TBD_32_ADDR(quicc, page,channel)) \ | ||
| 389 | while (!((bd)->status & T_W)) \ | ||
| 390 | (bd)++; \ | ||
| 391 | else \ | ||
| 392 | (bd)--; \ | ||
| 393 | } | ||
| 394 | #define INCREASE_RBD_32(bd,quicc,page,channel) { \ | ||
| 395 | if((bd)->status & R_W) \ | ||
| 396 | (bd) = RBD_32_ADDR(quicc,page,channel); \ | ||
| 397 | else \ | ||
| 398 | (bd)++; \ | ||
| 399 | } | ||
| 400 | #define DECREASE_RBD_32(bd,quicc,page,channel) { \ | ||
| 401 | if ((bd) == RBD_32_ADDR(quicc, page,channel)) \ | ||
| 402 | while (!((bd)->status & T_W)) \ | ||
| 403 | (bd)++; \ | ||
| 404 | else \ | ||
| 405 | (bd)--; \ | ||
| 406 | } | ||
| 407 | |||
| 408 | #endif | ||
diff --git a/arch/m68knommu/include/asm/machdep.h b/arch/m68knommu/include/asm/machdep.h deleted file mode 100644 index de9f47a51cc2..000000000000 --- a/arch/m68knommu/include/asm/machdep.h +++ /dev/null | |||
| @@ -1,26 +0,0 @@ | |||
| 1 | #ifndef _M68KNOMMU_MACHDEP_H | ||
| 2 | #define _M68KNOMMU_MACHDEP_H | ||
| 3 | |||
| 4 | #include <linux/interrupt.h> | ||
| 5 | |||
| 6 | /* Hardware clock functions */ | ||
| 7 | extern void hw_timer_init(void); | ||
| 8 | extern unsigned long hw_timer_offset(void); | ||
| 9 | |||
| 10 | extern irqreturn_t arch_timer_interrupt(int irq, void *dummy); | ||
| 11 | |||
| 12 | /* Machine dependent time handling */ | ||
| 13 | extern void (*mach_gettod)(int *year, int *mon, int *day, int *hour, | ||
| 14 | int *min, int *sec); | ||
| 15 | extern int (*mach_set_clock_mmss)(unsigned long); | ||
| 16 | |||
| 17 | /* machine dependent power off functions */ | ||
| 18 | extern void (*mach_reset)( void ); | ||
| 19 | extern void (*mach_halt)( void ); | ||
| 20 | extern void (*mach_power_off)( void ); | ||
| 21 | |||
| 22 | extern void config_BSP(char *command, int len); | ||
| 23 | |||
| 24 | extern void do_IRQ(int irq, struct pt_regs *fp); | ||
| 25 | |||
| 26 | #endif /* _M68KNOMMU_MACHDEP_H */ | ||
diff --git a/arch/m68knommu/include/asm/math-emu.h b/arch/m68knommu/include/asm/math-emu.h deleted file mode 100644 index 7e7090517b72..000000000000 --- a/arch/m68knommu/include/asm/math-emu.h +++ /dev/null | |||
| @@ -1 +0,0 @@ | |||
| 1 | #include <asm-m68k/math-emu.h> | ||
diff --git a/arch/m68knommu/include/asm/mc146818rtc.h b/arch/m68knommu/include/asm/mc146818rtc.h deleted file mode 100644 index 907a0481a140..000000000000 --- a/arch/m68knommu/include/asm/mc146818rtc.h +++ /dev/null | |||
| @@ -1,9 +0,0 @@ | |||
| 1 | /* | ||
| 2 | * Machine dependent access functions for RTC registers. | ||
| 3 | */ | ||
| 4 | #ifndef _M68KNOMMU_MC146818RTC_H | ||
| 5 | #define _M68KNOMMU_MC146818RTC_H | ||
| 6 | |||
| 7 | /* empty include file to satisfy the include in genrtc.c/ide-geometry.c */ | ||
| 8 | |||
| 9 | #endif /* _M68KNOMMU_MC146818RTC_H */ | ||
diff --git a/arch/m68knommu/include/asm/mcfcache.h b/arch/m68knommu/include/asm/mcfcache.h deleted file mode 100644 index c042634fadaa..000000000000 --- a/arch/m68knommu/include/asm/mcfcache.h +++ /dev/null | |||
| @@ -1,150 +0,0 @@ | |||
| 1 | /****************************************************************************/ | ||
| 2 | |||
| 3 | /* | ||
| 4 | * mcfcache.h -- ColdFire CPU cache support code | ||
| 5 | * | ||
| 6 | * (C) Copyright 2004, Greg Ungerer <gerg@snapgear.com> | ||
| 7 | */ | ||
| 8 | |||
| 9 | /****************************************************************************/ | ||
| 10 | #ifndef __M68KNOMMU_MCFCACHE_H | ||
| 11 | #define __M68KNOMMU_MCFCACHE_H | ||
| 12 | /****************************************************************************/ | ||
| 13 | |||
| 14 | |||
| 15 | /* | ||
| 16 | * The different ColdFire families have different cache arrangments. | ||
| 17 | * Everything from a small instruction only cache, to configurable | ||
| 18 | * data and/or instruction cache, to unified instruction/data, to | ||
| 19 | * harvard style separate instruction and data caches. | ||
| 20 | */ | ||
| 21 | |||
| 22 | #if defined(CONFIG_M5206) || defined(CONFIG_M5206e) || defined(CONFIG_M5272) | ||
| 23 | /* | ||
| 24 | * Simple version 2 core cache. These have instruction cache only, | ||
| 25 | * we just need to invalidate it and enable it. | ||
| 26 | */ | ||
| 27 | .macro CACHE_ENABLE | ||
| 28 | movel #0x01000000,%d0 /* invalidate cache cmd */ | ||
| 29 | movec %d0,%CACR /* do invalidate cache */ | ||
| 30 | movel #0x80000100,%d0 /* setup cache mask */ | ||
| 31 | movec %d0,%CACR /* enable cache */ | ||
| 32 | .endm | ||
| 33 | #endif /* CONFIG_M5206 || CONFIG_M5206e || CONFIG_M5272 */ | ||
| 34 | |||
| 35 | #if defined(CONFIG_M523x) || defined(CONFIG_M527x) | ||
| 36 | /* | ||
| 37 | * New version 2 cores have a configurable split cache arrangement. | ||
| 38 | * For now I am just enabling instruction cache - but ultimately I | ||
| 39 | * think a split instruction/data cache would be better. | ||
| 40 | */ | ||
| 41 | .macro CACHE_ENABLE | ||
| 42 | movel #0x01400000,%d0 | ||
| 43 | movec %d0,%CACR /* invalidate cache */ | ||
| 44 | nop | ||
| 45 | movel #0x0000c000,%d0 /* set SDRAM cached only */ | ||
| 46 | movec %d0,%ACR0 | ||
| 47 | movel #0x00000000,%d0 /* no other regions cached */ | ||
| 48 | movec %d0,%ACR1 | ||
| 49 | movel #0x80400100,%d0 /* configure cache */ | ||
| 50 | movec %d0,%CACR /* enable cache */ | ||
| 51 | nop | ||
| 52 | .endm | ||
| 53 | #endif /* CONFIG_M523x || CONFIG_M527x */ | ||
| 54 | |||
| 55 | #if defined(CONFIG_M528x) | ||
| 56 | .macro CACHE_ENABLE | ||
| 57 | nop | ||
| 58 | movel #0x01000000, %d0 | ||
| 59 | movec %d0, %CACR /* Invalidate cache */ | ||
| 60 | nop | ||
| 61 | movel #0x0000c020, %d0 /* Set SDRAM cached only */ | ||
| 62 | movec %d0, %ACR0 | ||
| 63 | movel #0x00000000, %d0 /* No other regions cached */ | ||
| 64 | movec %d0, %ACR1 | ||
| 65 | movel #0x80000200, %d0 /* Setup cache mask */ | ||
| 66 | movec %d0, %CACR /* Enable cache */ | ||
| 67 | nop | ||
| 68 | .endm | ||
| 69 | #endif /* CONFIG_M528x */ | ||
| 70 | |||
| 71 | #if defined(CONFIG_M5249) || defined(CONFIG_M5307) | ||
| 72 | /* | ||
| 73 | * The version 3 core cache. Oddly enough the version 2 core 5249 | ||
| 74 | * has the same SDRAM and cache setup as the version 3 cores. | ||
| 75 | * This is a single unified instruction/data cache. | ||
| 76 | */ | ||
| 77 | .macro CACHE_ENABLE | ||
| 78 | movel #0x01000000,%d0 /* invalidate whole cache */ | ||
| 79 | movec %d0,%CACR | ||
| 80 | nop | ||
| 81 | #if defined(DEBUGGER_COMPATIBLE_CACHE) || defined(CONFIG_SECUREEDGEMP3) | ||
| 82 | movel #0x0000c000,%d0 /* set SDRAM cached (write-thru) */ | ||
| 83 | #else | ||
| 84 | movel #0x0000c020,%d0 /* set SDRAM cached (copyback) */ | ||
| 85 | #endif | ||
| 86 | movec %d0,%ACR0 | ||
| 87 | movel #0x00000000,%d0 /* no other regions cached */ | ||
| 88 | movec %d0,%ACR1 | ||
| 89 | movel #0xa0000200,%d0 /* enable cache */ | ||
| 90 | movec %d0,%CACR | ||
| 91 | nop | ||
| 92 | .endm | ||
| 93 | #endif /* CONFIG_M5249 || CONFIG_M5307 */ | ||
| 94 | |||
| 95 | #if defined(CONFIG_M532x) | ||
| 96 | .macro CACHE_ENABLE | ||
| 97 | movel #0x01000000,%d0 /* invalidate cache cmd */ | ||
| 98 | movec %d0,%CACR /* do invalidate cache */ | ||
| 99 | nop | ||
| 100 | movel #0x4001C000,%d0 /* set SDRAM cached (write-thru) */ | ||
| 101 | movec %d0,%ACR0 | ||
| 102 | movel #0x00000000,%d0 /* no other regions cached */ | ||
| 103 | movec %d0,%ACR1 | ||
| 104 | movel #0x80000200,%d0 /* setup cache mask */ | ||
| 105 | movec %d0,%CACR /* enable cache */ | ||
| 106 | nop | ||
| 107 | .endm | ||
| 108 | #endif /* CONFIG_M532x */ | ||
| 109 | |||
| 110 | #if defined(CONFIG_M5407) | ||
| 111 | /* | ||
| 112 | * Version 4 cores have a true harvard style separate instruction | ||
| 113 | * and data cache. Invalidate and enable cache, also enable write | ||
| 114 | * buffers and branch accelerator. | ||
| 115 | */ | ||
| 116 | .macro CACHE_ENABLE | ||
| 117 | movel #0x01040100,%d0 /* invalidate whole cache */ | ||
| 118 | movec %d0,%CACR | ||
| 119 | nop | ||
| 120 | movel #0x000fc000,%d0 /* set SDRAM cached only */ | ||
| 121 | movec %d0, %ACR0 | ||
| 122 | movel #0x00000000,%d0 /* no other regions cached */ | ||
| 123 | movec %d0, %ACR1 | ||
| 124 | movel #0x000fc000,%d0 /* set SDRAM cached only */ | ||
| 125 | movec %d0, %ACR2 | ||
| 126 | movel #0x00000000,%d0 /* no other regions cached */ | ||
| 127 | movec %d0, %ACR3 | ||
| 128 | movel #0xb6088400,%d0 /* enable caches */ | ||
| 129 | movec %d0,%CACR | ||
| 130 | nop | ||
| 131 | .endm | ||
| 132 | #endif /* CONFIG_M5407 */ | ||
| 133 | |||
| 134 | #if defined(CONFIG_M520x) | ||
| 135 | .macro CACHE_ENABLE | ||
| 136 | move.l #0x01000000,%d0 /* invalidate whole cache */ | ||
| 137 | movec %d0,%CACR | ||
| 138 | nop | ||
| 139 | move.l #0x0000c000,%d0 /* set SDRAM cached (write-thru) */ | ||
| 140 | movec %d0,%ACR0 | ||
| 141 | move.l #0x00000000,%d0 /* no other regions cached */ | ||
| 142 | movec %d0,%ACR1 | ||
| 143 | move.l #0x80400000,%d0 /* enable 8K instruction cache */ | ||
| 144 | movec %d0,%CACR | ||
| 145 | nop | ||
| 146 | .endm | ||
| 147 | #endif /* CONFIG_M520x */ | ||
| 148 | |||
| 149 | /****************************************************************************/ | ||
| 150 | #endif /* __M68KNOMMU_MCFCACHE_H */ | ||
diff --git a/arch/m68knommu/include/asm/mcfdma.h b/arch/m68knommu/include/asm/mcfdma.h deleted file mode 100644 index 705c52c79cd8..000000000000 --- a/arch/m68knommu/include/asm/mcfdma.h +++ /dev/null | |||
| @@ -1,144 +0,0 @@ | |||
| 1 | /****************************************************************************/ | ||
| 2 | |||
| 3 | /* | ||
| 4 | * mcfdma.h -- Coldfire internal DMA support defines. | ||
| 5 | * | ||
| 6 | * (C) Copyright 1999, Rob Scott (rscott@mtrob.ml.org) | ||
| 7 | */ | ||
| 8 | |||
| 9 | /****************************************************************************/ | ||
| 10 | #ifndef mcfdma_h | ||
| 11 | #define mcfdma_h | ||
| 12 | /****************************************************************************/ | ||
| 13 | |||
| 14 | |||
| 15 | /* | ||
| 16 | * Get address specific defines for this Coldfire member. | ||
| 17 | */ | ||
| 18 | #if defined(CONFIG_M5206) || defined(CONFIG_M5206e) | ||
| 19 | #define MCFDMA_BASE0 0x200 /* Base address of DMA 0 */ | ||
| 20 | #define MCFDMA_BASE1 0x240 /* Base address of DMA 1 */ | ||
| 21 | #elif defined(CONFIG_M5272) | ||
| 22 | #define MCFDMA_BASE0 0x0e0 /* Base address of DMA 0 */ | ||
| 23 | #elif defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x) | ||
| 24 | /* These are relative to the IPSBAR, not MBAR */ | ||
| 25 | #define MCFDMA_BASE0 0x100 /* Base address of DMA 0 */ | ||
| 26 | #define MCFDMA_BASE1 0x140 /* Base address of DMA 1 */ | ||
| 27 | #define MCFDMA_BASE2 0x180 /* Base address of DMA 2 */ | ||
| 28 | #define MCFDMA_BASE3 0x1C0 /* Base address of DMA 3 */ | ||
| 29 | #elif defined(CONFIG_M5249) || defined(CONFIG_M5307) || defined(CONFIG_M5407) | ||
| 30 | #define MCFDMA_BASE0 0x300 /* Base address of DMA 0 */ | ||
| 31 | #define MCFDMA_BASE1 0x340 /* Base address of DMA 1 */ | ||
| 32 | #define MCFDMA_BASE2 0x380 /* Base address of DMA 2 */ | ||
| 33 | #define MCFDMA_BASE3 0x3C0 /* Base address of DMA 3 */ | ||
| 34 | #endif | ||
| 35 | |||
| 36 | |||
| 37 | #if !defined(CONFIG_M5272) | ||
| 38 | |||
| 39 | /* | ||
| 40 | * Define the DMA register set addresses. | ||
| 41 | * Note: these are longword registers, use unsigned long as data type | ||
| 42 | */ | ||
| 43 | #define MCFDMA_SAR 0x00 /* DMA source address (r/w) */ | ||
| 44 | #define MCFDMA_DAR 0x01 /* DMA destination adr (r/w) */ | ||
| 45 | /* these are word registers, use unsigned short data type */ | ||
| 46 | #define MCFDMA_DCR 0x04 /* DMA control reg (r/w) */ | ||
| 47 | #define MCFDMA_BCR 0x06 /* DMA byte count reg (r/w) */ | ||
| 48 | /* these are byte registers, use unsiged char data type */ | ||
| 49 | #define MCFDMA_DSR 0x10 /* DMA status reg (r/w) */ | ||
| 50 | #define MCFDMA_DIVR 0x14 /* DMA interrupt vec (r/w) */ | ||
| 51 | |||
| 52 | /* | ||
| 53 | * Bit definitions for the DMA Control Register (DCR). | ||
| 54 | */ | ||
| 55 | #define MCFDMA_DCR_INT 0x8000 /* Enable completion irq */ | ||
| 56 | #define MCFDMA_DCR_EEXT 0x4000 /* Enable external DMA req */ | ||
| 57 | #define MCFDMA_DCR_CS 0x2000 /* Enable cycle steal */ | ||
| 58 | #define MCFDMA_DCR_AA 0x1000 /* Enable auto alignment */ | ||
| 59 | #define MCFDMA_DCR_BWC_MASK 0x0E00 /* Bandwidth ctl mask */ | ||
| 60 | #define MCFDMA_DCR_BWC_512 0x0200 /* Bandwidth: 512 Bytes */ | ||
| 61 | #define MCFDMA_DCR_BWC_1024 0x0400 /* Bandwidth: 1024 Bytes */ | ||
| 62 | #define MCFDMA_DCR_BWC_2048 0x0600 /* Bandwidth: 2048 Bytes */ | ||
| 63 | #define MCFDMA_DCR_BWC_4096 0x0800 /* Bandwidth: 4096 Bytes */ | ||
| 64 | #define MCFDMA_DCR_BWC_8192 0x0a00 /* Bandwidth: 8192 Bytes */ | ||
| 65 | #define MCFDMA_DCR_BWC_16384 0x0c00 /* Bandwidth: 16384 Bytes */ | ||
| 66 | #define MCFDMA_DCR_BWC_32768 0x0e00 /* Bandwidth: 32768 Bytes */ | ||
| 67 | #define MCFDMA_DCR_SAA 0x0100 /* Single Address Access */ | ||
| 68 | #define MCFDMA_DCR_S_RW 0x0080 /* SAA read/write value */ | ||
| 69 | #define MCFDMA_DCR_SINC 0x0040 /* Source addr inc enable */ | ||
| 70 | #define MCFDMA_DCR_SSIZE_MASK 0x0030 /* Src xfer size */ | ||
| 71 | #define MCFDMA_DCR_SSIZE_LONG 0x0000 /* Src xfer size, 00 = longw */ | ||
| 72 | #define MCFDMA_DCR_SSIZE_BYTE 0x0010 /* Src xfer size, 01 = byte */ | ||
| 73 | #define MCFDMA_DCR_SSIZE_WORD 0x0020 /* Src xfer size, 10 = word */ | ||
| 74 | #define MCFDMA_DCR_SSIZE_LINE 0x0030 /* Src xfer size, 11 = line */ | ||
| 75 | #define MCFDMA_DCR_DINC 0x0008 /* Dest addr inc enable */ | ||
| 76 | #define MCFDMA_DCR_DSIZE_MASK 0x0006 /* Dest xfer size */ | ||
| 77 | #define MCFDMA_DCR_DSIZE_LONG 0x0000 /* Dest xfer size, 00 = long */ | ||
| 78 | #define MCFDMA_DCR_DSIZE_BYTE 0x0002 /* Dest xfer size, 01 = byte */ | ||
| 79 | #define MCFDMA_DCR_DSIZE_WORD 0x0004 /* Dest xfer size, 10 = word */ | ||
| 80 | #define MCFDMA_DCR_DSIZE_LINE 0x0006 /* Dest xfer size, 11 = line */ | ||
| 81 | #define MCFDMA_DCR_START 0x0001 /* Start transfer */ | ||
| 82 | |||
| 83 | /* | ||
| 84 | * Bit definitions for the DMA Status Register (DSR). | ||
| 85 | */ | ||
| 86 | #define MCFDMA_DSR_CE 0x40 /* Config error */ | ||
| 87 | #define MCFDMA_DSR_BES 0x20 /* Bus Error on source */ | ||
| 88 | #define MCFDMA_DSR_BED 0x10 /* Bus Error on dest */ | ||
| 89 | #define MCFDMA_DSR_REQ 0x04 /* Requests remaining */ | ||
| 90 | #define MCFDMA_DSR_BSY 0x02 /* Busy */ | ||
| 91 | #define MCFDMA_DSR_DONE 0x01 /* DMA transfer complete */ | ||
| 92 | |||
| 93 | #else /* This is an MCF5272 */ | ||
| 94 | |||
| 95 | #define MCFDMA_DMR 0x00 /* Mode Register (r/w) */ | ||
| 96 | #define MCFDMA_DIR 0x03 /* Interrupt trigger register (r/w) */ | ||
| 97 | #define MCFDMA_DSAR 0x03 /* Source Address register (r/w) */ | ||
| 98 | #define MCFDMA_DDAR 0x04 /* Destination Address register (r/w) */ | ||
| 99 | #define MCFDMA_DBCR 0x02 /* Byte Count Register (r/w) */ | ||
| 100 | |||
| 101 | /* Bit definitions for the DMA Mode Register (DMR) */ | ||
| 102 | #define MCFDMA_DMR_RESET 0x80000000L /* Reset bit */ | ||
| 103 | #define MCFDMA_DMR_EN 0x40000000L /* DMA enable */ | ||
| 104 | #define MCFDMA_DMR_RQM 0x000C0000L /* Request Mode Mask */ | ||
| 105 | #define MCFDMA_DMR_RQM_DUAL 0x000C0000L /* Dual address mode, the only valid mode */ | ||
| 106 | #define MCFDMA_DMR_DSTM 0x00002000L /* Destination addressing mask */ | ||
| 107 | #define MCFDMA_DMR_DSTM_SA 0x00000000L /* Destination uses static addressing */ | ||
| 108 | #define MCFDMA_DMR_DSTM_IA 0x00002000L /* Destination uses incremental addressing */ | ||
| 109 | #define MCFDMA_DMR_DSTT_UD 0x00000400L /* Destination is user data */ | ||
| 110 | #define MCFDMA_DMR_DSTT_UC 0x00000800L /* Destination is user code */ | ||
| 111 | #define MCFDMA_DMR_DSTT_SD 0x00001400L /* Destination is supervisor data */ | ||
| 112 | #define MCFDMA_DMR_DSTT_SC 0x00001800L /* Destination is supervisor code */ | ||
| 113 | #define MCFDMA_DMR_DSTS_OFF 0x8 /* offset to the destination size bits */ | ||
| 114 | #define MCFDMA_DMR_DSTS_LONG 0x00000000L /* Long destination size */ | ||
| 115 | #define MCFDMA_DMR_DSTS_BYTE 0x00000100L /* Byte destination size */ | ||
| 116 | #define MCFDMA_DMR_DSTS_WORD 0x00000200L /* Word destination size */ | ||
| 117 | #define MCFDMA_DMR_DSTS_LINE 0x00000300L /* Line destination size */ | ||
| 118 | #define MCFDMA_DMR_SRCM 0x00000020L /* Source addressing mask */ | ||
| 119 | #define MCFDMA_DMR_SRCM_SA 0x00000000L /* Source uses static addressing */ | ||
| 120 | #define MCFDMA_DMR_SRCM_IA 0x00000020L /* Source uses incremental addressing */ | ||
| 121 | #define MCFDMA_DMR_SRCT_UD 0x00000004L /* Source is user data */ | ||
| 122 | #define MCFDMA_DMR_SRCT_UC 0x00000008L /* Source is user code */ | ||
| 123 | #define MCFDMA_DMR_SRCT_SD 0x00000014L /* Source is supervisor data */ | ||
| 124 | #define MCFDMA_DMR_SRCT_SC 0x00000018L /* Source is supervisor code */ | ||
| 125 | #define MCFDMA_DMR_SRCS_OFF 0x0 /* Offset to the source size bits */ | ||
| 126 | #define MCFDMA_DMR_SRCS_LONG 0x00000000L /* Long source size */ | ||
| 127 | #define MCFDMA_DMR_SRCS_BYTE 0x00000001L /* Byte source size */ | ||
| 128 | #define MCFDMA_DMR_SRCS_WORD 0x00000002L /* Word source size */ | ||
| 129 | #define MCFDMA_DMR_SRCS_LINE 0x00000003L /* Line source size */ | ||
| 130 | |||
| 131 | /* Bit definitions for the DMA interrupt register (DIR) */ | ||
| 132 | #define MCFDMA_DIR_INVEN 0x1000 /* Invalid Combination interrupt enable */ | ||
| 133 | #define MCFDMA_DIR_ASCEN 0x0800 /* Address Sequence Complete (Completion) interrupt enable */ | ||
| 134 | #define MCFDMA_DIR_TEEN 0x0200 /* Transfer Error interrupt enable */ | ||
| 135 | #define MCFDMA_DIR_TCEN 0x0100 /* Transfer Complete (a bus transfer, that is) interrupt enable */ | ||
| 136 | #define MCFDMA_DIR_INV 0x0010 /* Invalid Combination */ | ||
| 137 | #define MCFDMA_DIR_ASC 0x0008 /* Address Sequence Complete (DMA Completion) */ | ||
| 138 | #define MCFDMA_DIR_TE 0x0002 /* Transfer Error */ | ||
| 139 | #define MCFDMA_DIR_TC 0x0001 /* Transfer Complete */ | ||
| 140 | |||
| 141 | #endif /* !defined(CONFIG_M5272) */ | ||
| 142 | |||
| 143 | /****************************************************************************/ | ||
| 144 | #endif /* mcfdma_h */ | ||
diff --git a/arch/m68knommu/include/asm/mcfmbus.h b/arch/m68knommu/include/asm/mcfmbus.h deleted file mode 100644 index 319899c47a2c..000000000000 --- a/arch/m68knommu/include/asm/mcfmbus.h +++ /dev/null | |||
| @@ -1,77 +0,0 @@ | |||
| 1 | /****************************************************************************/ | ||
| 2 | |||
| 3 | /* | ||
| 4 | * mcfmbus.h -- Coldfire MBUS support defines. | ||
| 5 | * | ||
| 6 | * (C) Copyright 1999, Martin Floeer (mfloeer@axcent.de) | ||
| 7 | */ | ||
| 8 | |||
| 9 | /****************************************************************************/ | ||
| 10 | |||
| 11 | |||
| 12 | #ifndef mcfmbus_h | ||
| 13 | #define mcfmbus_h | ||
| 14 | |||
| 15 | |||
| 16 | #define MCFMBUS_BASE 0x280 | ||
| 17 | #define MCFMBUS_IRQ_VECTOR 0x19 | ||
| 18 | #define MCFMBUS_IRQ 0x1 | ||
| 19 | #define MCFMBUS_CLK 0x3f | ||
| 20 | #define MCFMBUS_IRQ_LEVEL 0x07 /*IRQ Level 1*/ | ||
| 21 | #define MCFMBUS_ADDRESS 0x01 | ||
| 22 | |||
| 23 | |||
| 24 | /* | ||
| 25 | * Define the 5307 MBUS register set addresses | ||
| 26 | */ | ||
| 27 | |||
| 28 | #define MCFMBUS_MADR 0x00 | ||
| 29 | #define MCFMBUS_MFDR 0x04 | ||
| 30 | #define MCFMBUS_MBCR 0x08 | ||
| 31 | #define MCFMBUS_MBSR 0x0C | ||
| 32 | #define MCFMBUS_MBDR 0x10 | ||
| 33 | |||
| 34 | |||
| 35 | #define MCFMBUS_MADR_ADDR(a) (((a)&0x7F)<<0x01) /*Slave Address*/ | ||
| 36 | |||
| 37 | #define MCFMBUS_MFDR_MBC(a) ((a)&0x3F) /*M-Bus Clock*/ | ||
| 38 | |||
| 39 | /* | ||
| 40 | * Define bit flags in Control Register | ||
| 41 | */ | ||
| 42 | |||
| 43 | #define MCFMBUS_MBCR_MEN (0x80) /* M-Bus Enable */ | ||
| 44 | #define MCFMBUS_MBCR_MIEN (0x40) /* M-Bus Interrupt Enable */ | ||
| 45 | #define MCFMBUS_MBCR_MSTA (0x20) /* Master/Slave Mode Select Bit */ | ||
| 46 | #define MCFMBUS_MBCR_MTX (0x10) /* Transmit/Rcv Mode Select Bit */ | ||
| 47 | #define MCFMBUS_MBCR_TXAK (0x08) /* Transmit Acknowledge Enable */ | ||
| 48 | #define MCFMBUS_MBCR_RSTA (0x04) /* Repeat Start */ | ||
| 49 | |||
| 50 | /* | ||
| 51 | * Define bit flags in Status Register | ||
| 52 | */ | ||
| 53 | |||
| 54 | #define MCFMBUS_MBSR_MCF (0x80) /* Data Transfer Complete */ | ||
| 55 | #define MCFMBUS_MBSR_MAAS (0x40) /* Addressed as a Slave */ | ||
| 56 | #define MCFMBUS_MBSR_MBB (0x20) /* Bus Busy */ | ||
| 57 | #define MCFMBUS_MBSR_MAL (0x10) /* Arbitration Lost */ | ||
| 58 | #define MCFMBUS_MBSR_SRW (0x04) /* Slave Transmit */ | ||
| 59 | #define MCFMBUS_MBSR_MIF (0x02) /* M-Bus Interrupt */ | ||
| 60 | #define MCFMBUS_MBSR_RXAK (0x01) /* No Acknowledge Received */ | ||
| 61 | |||
| 62 | /* | ||
| 63 | * Define bit flags in DATA I/O Register | ||
| 64 | */ | ||
| 65 | |||
| 66 | #define MCFMBUS_MBDR_READ (0x01) /* 1=read 0=write MBUS */ | ||
| 67 | |||
| 68 | #define MBUSIOCSCLOCK 1 | ||
| 69 | #define MBUSIOCGCLOCK 2 | ||
| 70 | #define MBUSIOCSADDR 3 | ||
| 71 | #define MBUSIOCGADDR 4 | ||
| 72 | #define MBUSIOCSSLADDR 5 | ||
| 73 | #define MBUSIOCGSLADDR 6 | ||
| 74 | #define MBUSIOCSSUBADDR 7 | ||
| 75 | #define MBUSIOCGSUBADDR 8 | ||
| 76 | |||
| 77 | #endif | ||
diff --git a/arch/m68knommu/include/asm/mcfne.h b/arch/m68knommu/include/asm/mcfne.h deleted file mode 100644 index 431f63aadd0e..000000000000 --- a/arch/m68knommu/include/asm/mcfne.h +++ /dev/null | |||
| @@ -1,325 +0,0 @@ | |||
| 1 | /****************************************************************************/ | ||
| 2 | |||
| 3 | /* | ||
| 4 | * mcfne.h -- NE2000 in ColdFire eval boards. | ||
| 5 | * | ||
| 6 | * (C) Copyright 1999-2000, Greg Ungerer (gerg@snapgear.com) | ||
| 7 | * (C) Copyright 2000, Lineo (www.lineo.com) | ||
| 8 | * (C) Copyright 2001, SnapGear (www.snapgear.com) | ||
| 9 | * | ||
| 10 | * 19990409 David W. Miller Converted from m5206ne.h for 5307 eval board | ||
| 11 | * | ||
| 12 | * Hacked support for m5206e Cadre III evaluation board | ||
| 13 | * Fred Stevens (fred.stevens@pemstar.com) 13 April 1999 | ||
| 14 | */ | ||
| 15 | |||
| 16 | /****************************************************************************/ | ||
| 17 | #ifndef mcfne_h | ||
| 18 | #define mcfne_h | ||
| 19 | /****************************************************************************/ | ||
| 20 | |||
| 21 | |||
| 22 | /* | ||
| 23 | * Support for NE2000 clones devices in ColdFire based boards. | ||
| 24 | * Not all boards address these parts the same way, some use a | ||
| 25 | * direct addressing method, others use a side-band address space | ||
| 26 | * to access odd address registers, some require byte swapping | ||
| 27 | * others do not. | ||
| 28 | */ | ||
| 29 | #define BSWAP(w) (((w) << 8) | ((w) >> 8)) | ||
| 30 | #define RSWAP(w) (w) | ||
| 31 | |||
| 32 | |||
| 33 | /* | ||
| 34 | * Define the basic hardware resources of NE2000 boards. | ||
| 35 | */ | ||
| 36 | |||
| 37 | #if defined(CONFIG_ARN5206) | ||
| 38 | #define NE2000_ADDR 0x40000300 | ||
| 39 | #define NE2000_ODDOFFSET 0x00010000 | ||
| 40 | #define NE2000_IRQ_VECTOR 0xf0 | ||
| 41 | #define NE2000_IRQ_PRIORITY 2 | ||
| 42 | #define NE2000_IRQ_LEVEL 4 | ||
| 43 | #define NE2000_BYTE volatile unsigned short | ||
| 44 | #endif | ||
| 45 | |||
| 46 | #if defined(CONFIG_M5206eC3) | ||
| 47 | #define NE2000_ADDR 0x40000300 | ||
| 48 | #define NE2000_ODDOFFSET 0x00010000 | ||
| 49 | #define NE2000_IRQ_VECTOR 0x1c | ||
| 50 | #define NE2000_IRQ_PRIORITY 2 | ||
| 51 | #define NE2000_IRQ_LEVEL 4 | ||
| 52 | #define NE2000_BYTE volatile unsigned short | ||
| 53 | #endif | ||
| 54 | |||
| 55 | #if defined(CONFIG_M5206e) && defined(CONFIG_NETtel) | ||
| 56 | #define NE2000_ADDR 0x30000300 | ||
| 57 | #define NE2000_IRQ_VECTOR 25 | ||
| 58 | #define NE2000_IRQ_PRIORITY 1 | ||
| 59 | #define NE2000_IRQ_LEVEL 3 | ||
| 60 | #define NE2000_BYTE volatile unsigned char | ||
| 61 | #endif | ||
| 62 | |||
| 63 | #if defined(CONFIG_M5307C3) | ||
| 64 | #define NE2000_ADDR 0x40000300 | ||
| 65 | #define NE2000_ODDOFFSET 0x00010000 | ||
| 66 | #define NE2000_IRQ_VECTOR 0x1b | ||
| 67 | #define NE2000_BYTE volatile unsigned short | ||
| 68 | #endif | ||
| 69 | |||
| 70 | #if defined(CONFIG_M5272) && defined(CONFIG_NETtel) | ||
| 71 | #define NE2000_ADDR 0x30600300 | ||
| 72 | #define NE2000_ODDOFFSET 0x00008000 | ||
| 73 | #define NE2000_IRQ_VECTOR 67 | ||
| 74 | #undef BSWAP | ||
| 75 | #define BSWAP(w) (w) | ||
| 76 | #define NE2000_BYTE volatile unsigned short | ||
| 77 | #undef RSWAP | ||
| 78 | #define RSWAP(w) (((w) << 8) | ((w) >> 8)) | ||
| 79 | #endif | ||
| 80 | |||
| 81 | #if defined(CONFIG_M5307) && defined(CONFIG_NETtel) | ||
| 82 | #define NE2000_ADDR0 0x30600300 | ||
| 83 | #define NE2000_ADDR1 0x30800300 | ||
| 84 | #define NE2000_ODDOFFSET 0x00008000 | ||
| 85 | #define NE2000_IRQ_VECTOR0 27 | ||
| 86 | #define NE2000_IRQ_VECTOR1 29 | ||
| 87 | #undef BSWAP | ||
| 88 | #define BSWAP(w) (w) | ||
| 89 | #define NE2000_BYTE volatile unsigned short | ||
| 90 | #undef RSWAP | ||
| 91 | #define RSWAP(w) (((w) << 8) | ((w) >> 8)) | ||
| 92 | #endif | ||
| 93 | |||
| 94 | #if defined(CONFIG_M5307) && defined(CONFIG_SECUREEDGEMP3) | ||
| 95 | #define NE2000_ADDR 0x30600300 | ||
| 96 | #define NE2000_ODDOFFSET 0x00008000 | ||
| 97 | #define NE2000_IRQ_VECTOR 27 | ||
| 98 | #undef BSWAP | ||
| 99 | #define BSWAP(w) (w) | ||
| 100 | #define NE2000_BYTE volatile unsigned short | ||
| 101 | #undef RSWAP | ||
| 102 | #define RSWAP(w) (((w) << 8) | ((w) >> 8)) | ||
| 103 | #endif | ||
| 104 | |||
| 105 | #if defined(CONFIG_ARN5307) | ||
| 106 | #define NE2000_ADDR 0xfe600300 | ||
| 107 | #define NE2000_ODDOFFSET 0x00010000 | ||
| 108 | #define NE2000_IRQ_VECTOR 0x1b | ||
| 109 | #define NE2000_IRQ_PRIORITY 2 | ||
| 110 | #define NE2000_IRQ_LEVEL 3 | ||
| 111 | #define NE2000_BYTE volatile unsigned short | ||
| 112 | #endif | ||
| 113 | |||
| 114 | #if defined(CONFIG_M5407C3) | ||
| 115 | #define NE2000_ADDR 0x40000300 | ||
| 116 | #define NE2000_ODDOFFSET 0x00010000 | ||
| 117 | #define NE2000_IRQ_VECTOR 0x1b | ||
| 118 | #define NE2000_BYTE volatile unsigned short | ||
| 119 | #endif | ||
| 120 | |||
| 121 | /****************************************************************************/ | ||
| 122 | |||
| 123 | /* | ||
| 124 | * Side-band address space for odd address requires re-mapping | ||
| 125 | * many of the standard ISA access functions. | ||
| 126 | */ | ||
| 127 | #ifdef NE2000_ODDOFFSET | ||
| 128 | |||
| 129 | #undef outb | ||
| 130 | #undef outb_p | ||
| 131 | #undef inb | ||
| 132 | #undef inb_p | ||
| 133 | #undef outsb | ||
| 134 | #undef outsw | ||
| 135 | #undef insb | ||
| 136 | #undef insw | ||
| 137 | |||
| 138 | #define outb ne2000_outb | ||
| 139 | #define inb ne2000_inb | ||
| 140 | #define outb_p ne2000_outb | ||
| 141 | #define inb_p ne2000_inb | ||
| 142 | #define outsb ne2000_outsb | ||
| 143 | #define outsw ne2000_outsw | ||
| 144 | #define insb ne2000_insb | ||
| 145 | #define insw ne2000_insw | ||
| 146 | |||
| 147 | |||
| 148 | #ifndef COLDFIRE_NE2000_FUNCS | ||
| 149 | |||
| 150 | void ne2000_outb(unsigned int val, unsigned int addr); | ||
| 151 | int ne2000_inb(unsigned int addr); | ||
| 152 | void ne2000_insb(unsigned int addr, void *vbuf, int unsigned long len); | ||
| 153 | void ne2000_insw(unsigned int addr, void *vbuf, unsigned long len); | ||
| 154 | void ne2000_outsb(unsigned int addr, void *vbuf, unsigned long len); | ||
| 155 | void ne2000_outsw(unsigned int addr, void *vbuf, unsigned long len); | ||
| 156 | |||
| 157 | #else | ||
| 158 | |||
| 159 | /* | ||
| 160 | * This macro converts a conventional register address into the | ||
| 161 | * real memory pointer of the mapped NE2000 device. | ||
| 162 | * On most NE2000 implementations on ColdFire boards the chip is | ||
| 163 | * mapped in kinda funny, due to its ISA heritage. | ||
| 164 | */ | ||
| 165 | #define NE2000_PTR(addr) ((addr&0x1)?(NE2000_ODDOFFSET+addr-1):(addr)) | ||
| 166 | #define NE2000_DATA_PTR(addr) (addr) | ||
| 167 | |||
| 168 | |||
| 169 | void ne2000_outb(unsigned int val, unsigned int addr) | ||
| 170 | { | ||
| 171 | NE2000_BYTE *rp; | ||
| 172 | |||
| 173 | rp = (NE2000_BYTE *) NE2000_PTR(addr); | ||
| 174 | *rp = RSWAP(val); | ||
| 175 | } | ||
| 176 | |||
| 177 | int ne2000_inb(unsigned int addr) | ||
| 178 | { | ||
| 179 | NE2000_BYTE *rp, val; | ||
| 180 | |||
| 181 | rp = (NE2000_BYTE *) NE2000_PTR(addr); | ||
| 182 | val = *rp; | ||
| 183 | return((int) ((NE2000_BYTE) RSWAP(val))); | ||
| 184 | } | ||
| 185 | |||
| 186 | void ne2000_insb(unsigned int addr, void *vbuf, int unsigned long len) | ||
| 187 | { | ||
| 188 | NE2000_BYTE *rp, val; | ||
| 189 | unsigned char *buf; | ||
| 190 | |||
| 191 | buf = (unsigned char *) vbuf; | ||
| 192 | rp = (NE2000_BYTE *) NE2000_DATA_PTR(addr); | ||
| 193 | for (; (len > 0); len--) { | ||
| 194 | val = *rp; | ||
| 195 | *buf++ = RSWAP(val); | ||
| 196 | } | ||
| 197 | } | ||
| 198 | |||
| 199 | void ne2000_insw(unsigned int addr, void *vbuf, unsigned long len) | ||
| 200 | { | ||
| 201 | volatile unsigned short *rp; | ||
| 202 | unsigned short w, *buf; | ||
| 203 | |||
| 204 | buf = (unsigned short *) vbuf; | ||
| 205 | rp = (volatile unsigned short *) NE2000_DATA_PTR(addr); | ||
| 206 | for (; (len > 0); len--) { | ||
| 207 | w = *rp; | ||
| 208 | *buf++ = BSWAP(w); | ||
| 209 | } | ||
| 210 | } | ||
| 211 | |||
| 212 | void ne2000_outsb(unsigned int addr, const void *vbuf, unsigned long len) | ||
| 213 | { | ||
| 214 | NE2000_BYTE *rp, val; | ||
| 215 | unsigned char *buf; | ||
| 216 | |||
| 217 | buf = (unsigned char *) vbuf; | ||
| 218 | rp = (NE2000_BYTE *) NE2000_DATA_PTR(addr); | ||
| 219 | for (; (len > 0); len--) { | ||
| 220 | val = *buf++; | ||
| 221 | *rp = RSWAP(val); | ||
| 222 | } | ||
| 223 | } | ||
| 224 | |||
| 225 | void ne2000_outsw(unsigned int addr, const void *vbuf, unsigned long len) | ||
| 226 | { | ||
| 227 | volatile unsigned short *rp; | ||
| 228 | unsigned short w, *buf; | ||
| 229 | |||
| 230 | buf = (unsigned short *) vbuf; | ||
| 231 | rp = (volatile unsigned short *) NE2000_DATA_PTR(addr); | ||
| 232 | for (; (len > 0); len--) { | ||
| 233 | w = *buf++; | ||
| 234 | *rp = BSWAP(w); | ||
| 235 | } | ||
| 236 | } | ||
| 237 | |||
| 238 | #endif /* COLDFIRE_NE2000_FUNCS */ | ||
| 239 | #endif /* NE2000_OFFOFFSET */ | ||
| 240 | |||
| 241 | /****************************************************************************/ | ||
| 242 | |||
| 243 | #ifdef COLDFIRE_NE2000_FUNCS | ||
| 244 | |||
| 245 | /* | ||
| 246 | * Lastly the interrupt set up code... | ||
| 247 | * Minor differences between the different board types. | ||
| 248 | */ | ||
| 249 | |||
| 250 | #if defined(CONFIG_ARN5206) | ||
| 251 | void ne2000_irqsetup(int irq) | ||
| 252 | { | ||
| 253 | volatile unsigned char *icrp; | ||
| 254 | |||
| 255 | icrp = (volatile unsigned char *) (MCF_MBAR + MCFSIM_ICR4); | ||
| 256 | *icrp = MCFSIM_ICR_LEVEL4 | MCFSIM_ICR_PRI2; | ||
| 257 | mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_EINT4); | ||
| 258 | } | ||
| 259 | #endif | ||
| 260 | |||
| 261 | #if defined(CONFIG_M5206eC3) | ||
| 262 | void ne2000_irqsetup(int irq) | ||
| 263 | { | ||
| 264 | volatile unsigned char *icrp; | ||
| 265 | |||
| 266 | icrp = (volatile unsigned char *) (MCF_MBAR + MCFSIM_ICR4); | ||
| 267 | *icrp = MCFSIM_ICR_LEVEL4 | MCFSIM_ICR_PRI2 | MCFSIM_ICR_AUTOVEC; | ||
| 268 | mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_EINT4); | ||
| 269 | } | ||
| 270 | #endif | ||
| 271 | |||
| 272 | #if defined(CONFIG_M5206e) && defined(CONFIG_NETtel) | ||
| 273 | void ne2000_irqsetup(int irq) | ||
| 274 | { | ||
| 275 | mcf_autovector(irq); | ||
| 276 | } | ||
| 277 | #endif | ||
| 278 | |||
| 279 | #if defined(CONFIG_M5272) && defined(CONFIG_NETtel) | ||
| 280 | void ne2000_irqsetup(int irq) | ||
| 281 | { | ||
| 282 | volatile unsigned long *icrp; | ||
| 283 | volatile unsigned long *pitr; | ||
| 284 | |||
| 285 | /* The NE2000 device uses external IRQ3 */ | ||
| 286 | icrp = (volatile unsigned long *) (MCF_MBAR + MCFSIM_ICR1); | ||
| 287 | *icrp = (*icrp & 0x77077777) | 0x00d00000; | ||
| 288 | |||
| 289 | pitr = (volatile unsigned long *) (MCF_MBAR + MCFSIM_PITR); | ||
| 290 | *pitr = *pitr | 0x20000000; | ||
| 291 | } | ||
| 292 | |||
| 293 | void ne2000_irqack(int irq) | ||
| 294 | { | ||
| 295 | volatile unsigned long *icrp; | ||
| 296 | |||
| 297 | /* The NE2000 device uses external IRQ3 */ | ||
| 298 | icrp = (volatile unsigned long *) (MCF_MBAR + MCFSIM_ICR1); | ||
| 299 | *icrp = (*icrp & 0x77777777) | 0x00800000; | ||
| 300 | } | ||
| 301 | #endif | ||
| 302 | |||
| 303 | #if defined(CONFIG_M5307) || defined(CONFIG_M5407) | ||
| 304 | #if defined(CONFIG_NETtel) || defined(CONFIG_SECUREEDGEMP3) | ||
| 305 | |||
| 306 | void ne2000_irqsetup(int irq) | ||
| 307 | { | ||
| 308 | mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_EINT3); | ||
| 309 | mcf_autovector(irq); | ||
| 310 | } | ||
| 311 | |||
| 312 | #else | ||
| 313 | |||
| 314 | void ne2000_irqsetup(int irq) | ||
| 315 | { | ||
| 316 | mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_EINT3); | ||
| 317 | } | ||
| 318 | |||
| 319 | #endif /* ! CONFIG_NETtel || CONFIG_SECUREEDGEMP3 */ | ||
| 320 | #endif /* CONFIG_M5307 || CONFIG_M5407 */ | ||
| 321 | |||
| 322 | #endif /* COLDFIRE_NE2000_FUNCS */ | ||
| 323 | |||
| 324 | /****************************************************************************/ | ||
| 325 | #endif /* mcfne_h */ | ||
diff --git a/arch/m68knommu/include/asm/mcfpci.h b/arch/m68knommu/include/asm/mcfpci.h deleted file mode 100644 index f1507dd06ec6..000000000000 --- a/arch/m68knommu/include/asm/mcfpci.h +++ /dev/null | |||
| @@ -1,119 +0,0 @@ | |||
| 1 | /****************************************************************************/ | ||
| 2 | |||
| 3 | /* | ||
| 4 | * mcfpci.h -- PCI bridge on ColdFire eval boards. | ||
| 5 | * | ||
| 6 | * (C) Copyright 2000, Greg Ungerer (gerg@snapgear.com) | ||
| 7 | * (C) Copyright 2000, Lineo Inc. (www.lineo.com) | ||
| 8 | */ | ||
| 9 | |||
| 10 | /****************************************************************************/ | ||
| 11 | #ifndef mcfpci_h | ||
| 12 | #define mcfpci_h | ||
| 13 | /****************************************************************************/ | ||
| 14 | |||
| 15 | |||
| 16 | #ifdef CONFIG_PCI | ||
| 17 | |||
| 18 | /* | ||
| 19 | * Address regions in the PCI address space are not mapped into the | ||
| 20 | * normal memory space of the ColdFire. They must be accessed via | ||
| 21 | * handler routines. This is easy for I/O space (inb/outb/etc) but | ||
| 22 | * needs some code changes to support ordinary memory. Interrupts | ||
| 23 | * also need to be vectored through the PCI handler first, then it | ||
| 24 | * will call the actual driver sub-handlers. | ||
| 25 | */ | ||
| 26 | |||
| 27 | /* | ||
| 28 | * Un-define all the standard I/O access routines. | ||
| 29 | */ | ||
| 30 | #undef inb | ||
| 31 | #undef inw | ||
| 32 | #undef inl | ||
| 33 | #undef inb_p | ||
| 34 | #undef inw_p | ||
| 35 | #undef insb | ||
| 36 | #undef insw | ||
| 37 | #undef insl | ||
| 38 | #undef outb | ||
| 39 | #undef outw | ||
| 40 | #undef outl | ||
| 41 | #undef outb_p | ||
| 42 | #undef outw_p | ||
| 43 | #undef outsb | ||
| 44 | #undef outsw | ||
| 45 | #undef outsl | ||
| 46 | |||
| 47 | #undef request_irq | ||
| 48 | #undef free_irq | ||
| 49 | |||
| 50 | #undef bus_to_virt | ||
| 51 | #undef virt_to_bus | ||
| 52 | |||
| 53 | |||
| 54 | /* | ||
| 55 | * Re-direct all I/O memory accesses functions to PCI specific ones. | ||
| 56 | */ | ||
| 57 | #define inb pci_inb | ||
| 58 | #define inw pci_inw | ||
| 59 | #define inl pci_inl | ||
| 60 | #define inb_p pci_inb | ||
| 61 | #define inw_p pci_inw | ||
| 62 | #define insb pci_insb | ||
| 63 | #define insw pci_insw | ||
| 64 | #define insl pci_insl | ||
| 65 | |||
| 66 | #define outb pci_outb | ||
| 67 | #define outw pci_outw | ||
| 68 | #define outl pci_outl | ||
| 69 | #define outb_p pci_outb | ||
| 70 | #define outw_p pci_outw | ||
| 71 | #define outsb pci_outsb | ||
| 72 | #define outsw pci_outsw | ||
| 73 | #define outsl pci_outsl | ||
| 74 | |||
| 75 | #define request_irq pci_request_irq | ||
| 76 | #define free_irq pci_free_irq | ||
| 77 | |||
| 78 | #define virt_to_bus pci_virt_to_bus | ||
| 79 | #define bus_to_virt pci_bus_to_virt | ||
| 80 | |||
| 81 | #define CONFIG_COMEMPCI 1 | ||
| 82 | |||
| 83 | |||
| 84 | /* | ||
| 85 | * Prototypes of the real PCI functions (defined in bios32.c). | ||
| 86 | */ | ||
| 87 | unsigned char pci_inb(unsigned int addr); | ||
| 88 | unsigned short pci_inw(unsigned int addr); | ||
| 89 | unsigned int pci_inl(unsigned int addr); | ||
| 90 | void pci_insb(void *addr, void *buf, int len); | ||
| 91 | void pci_insw(void *addr, void *buf, int len); | ||
| 92 | void pci_insl(void *addr, void *buf, int len); | ||
| 93 | |||
| 94 | void pci_outb(unsigned char val, unsigned int addr); | ||
| 95 | void pci_outw(unsigned short val, unsigned int addr); | ||
| 96 | void pci_outl(unsigned int val, unsigned int addr); | ||
| 97 | void pci_outsb(void *addr, void *buf, int len); | ||
| 98 | void pci_outsw(void *addr, void *buf, int len); | ||
| 99 | void pci_outsl(void *addr, void *buf, int len); | ||
| 100 | |||
| 101 | int pci_request_irq(unsigned int irq, | ||
| 102 | void (*handler)(int, void *, struct pt_regs *), | ||
| 103 | unsigned long flags, | ||
| 104 | const char *device, | ||
| 105 | void *dev_id); | ||
| 106 | void pci_free_irq(unsigned int irq, void *dev_id); | ||
| 107 | |||
| 108 | void *pci_bmalloc(int size); | ||
| 109 | void pci_bmfree(void *bmp, int len); | ||
| 110 | void pci_copytoshmem(unsigned long bmp, void *src, int size); | ||
| 111 | void pci_copyfromshmem(void *dst, unsigned long bmp, int size); | ||
| 112 | unsigned long pci_virt_to_bus(volatile void *address); | ||
| 113 | void *pci_bus_to_virt(unsigned long address); | ||
| 114 | void pci_bmcpyto(void *dst, void *src, int len); | ||
| 115 | void pci_bmcpyfrom(void *dst, void *src, int len); | ||
| 116 | |||
| 117 | #endif /* CONFIG_PCI */ | ||
| 118 | /****************************************************************************/ | ||
| 119 | #endif /* mcfpci_h */ | ||
diff --git a/arch/m68knommu/include/asm/mcfpit.h b/arch/m68knommu/include/asm/mcfpit.h deleted file mode 100644 index f570cf64fd29..000000000000 --- a/arch/m68knommu/include/asm/mcfpit.h +++ /dev/null | |||
| @@ -1,64 +0,0 @@ | |||
| 1 | /****************************************************************************/ | ||
| 2 | |||
| 3 | /* | ||
| 4 | * mcfpit.h -- ColdFire internal PIT timer support defines. | ||
| 5 | * | ||
| 6 | * (C) Copyright 2003, Greg Ungerer (gerg@snapgear.com) | ||
| 7 | */ | ||
| 8 | |||
| 9 | /****************************************************************************/ | ||
| 10 | #ifndef mcfpit_h | ||
| 11 | #define mcfpit_h | ||
| 12 | /****************************************************************************/ | ||
| 13 | |||
| 14 | |||
| 15 | /* | ||
| 16 | * Get address specific defines for the 5270/5271, 5280/5282, and 5208. | ||
| 17 | */ | ||
| 18 | #if defined(CONFIG_M520x) | ||
| 19 | #define MCFPIT_BASE1 0x00080000 /* Base address of TIMER1 */ | ||
| 20 | #define MCFPIT_BASE2 0x00084000 /* Base address of TIMER2 */ | ||
| 21 | #else | ||
| 22 | #define MCFPIT_BASE1 0x00150000 /* Base address of TIMER1 */ | ||
| 23 | #define MCFPIT_BASE2 0x00160000 /* Base address of TIMER2 */ | ||
| 24 | #define MCFPIT_BASE3 0x00170000 /* Base address of TIMER3 */ | ||
| 25 | #define MCFPIT_BASE4 0x00180000 /* Base address of TIMER4 */ | ||
| 26 | #endif | ||
| 27 | |||
| 28 | /* | ||
| 29 | * Define the PIT timer register set addresses. | ||
| 30 | */ | ||
| 31 | #define MCFPIT_PCSR 0x0 /* PIT control register */ | ||
| 32 | #define MCFPIT_PMR 0x2 /* PIT modulus register */ | ||
| 33 | #define MCFPIT_PCNTR 0x4 /* PIT count register */ | ||
| 34 | |||
| 35 | /* | ||
| 36 | * Bit definitions for the PIT Control and Status register. | ||
| 37 | */ | ||
| 38 | #define MCFPIT_PCSR_CLK1 0x0000 /* System clock divisor */ | ||
| 39 | #define MCFPIT_PCSR_CLK2 0x0100 /* System clock divisor */ | ||
| 40 | #define MCFPIT_PCSR_CLK4 0x0200 /* System clock divisor */ | ||
| 41 | #define MCFPIT_PCSR_CLK8 0x0300 /* System clock divisor */ | ||
| 42 | #define MCFPIT_PCSR_CLK16 0x0400 /* System clock divisor */ | ||
| 43 | #define MCFPIT_PCSR_CLK32 0x0500 /* System clock divisor */ | ||
| 44 | #define MCFPIT_PCSR_CLK64 0x0600 /* System clock divisor */ | ||
| 45 | #define MCFPIT_PCSR_CLK128 0x0700 /* System clock divisor */ | ||
| 46 | #define MCFPIT_PCSR_CLK256 0x0800 /* System clock divisor */ | ||
| 47 | #define MCFPIT_PCSR_CLK512 0x0900 /* System clock divisor */ | ||
| 48 | #define MCFPIT_PCSR_CLK1024 0x0a00 /* System clock divisor */ | ||
| 49 | #define MCFPIT_PCSR_CLK2048 0x0b00 /* System clock divisor */ | ||
| 50 | #define MCFPIT_PCSR_CLK4096 0x0c00 /* System clock divisor */ | ||
| 51 | #define MCFPIT_PCSR_CLK8192 0x0d00 /* System clock divisor */ | ||
| 52 | #define MCFPIT_PCSR_CLK16384 0x0e00 /* System clock divisor */ | ||
| 53 | #define MCFPIT_PCSR_CLK32768 0x0f00 /* System clock divisor */ | ||
| 54 | #define MCFPIT_PCSR_DOZE 0x0040 /* Clock run in doze mode */ | ||
| 55 | #define MCFPIT_PCSR_HALTED 0x0020 /* Clock run in halt mode */ | ||
| 56 | #define MCFPIT_PCSR_OVW 0x0010 /* Overwrite PIT counter now */ | ||
| 57 | #define MCFPIT_PCSR_PIE 0x0008 /* Enable PIT interrupt */ | ||
| 58 | #define MCFPIT_PCSR_PIF 0x0004 /* PIT interrupt flag */ | ||
| 59 | #define MCFPIT_PCSR_RLD 0x0002 /* Reload counter */ | ||
| 60 | #define MCFPIT_PCSR_EN 0x0001 /* Enable PIT */ | ||
| 61 | #define MCFPIT_PCSR_DISABLE 0x0000 /* Disable PIT */ | ||
| 62 | |||
| 63 | /****************************************************************************/ | ||
| 64 | #endif /* mcfpit_h */ | ||
diff --git a/arch/m68knommu/include/asm/mcfsim.h b/arch/m68knommu/include/asm/mcfsim.h deleted file mode 100644 index da3f2ceff3a4..000000000000 --- a/arch/m68knommu/include/asm/mcfsim.h +++ /dev/null | |||
| @@ -1,126 +0,0 @@ | |||
| 1 | /****************************************************************************/ | ||
| 2 | |||
| 3 | /* | ||
| 4 | * mcfsim.h -- ColdFire System Integration Module support. | ||
| 5 | * | ||
| 6 | * (C) Copyright 1999-2003, Greg Ungerer (gerg@snapgear.com) | ||
| 7 | * (C) Copyright 2000, Lineo Inc. (www.lineo.com) | ||
| 8 | */ | ||
| 9 | |||
| 10 | /****************************************************************************/ | ||
| 11 | #ifndef mcfsim_h | ||
| 12 | #define mcfsim_h | ||
| 13 | /****************************************************************************/ | ||
| 14 | |||
| 15 | |||
| 16 | /* | ||
| 17 | * Include 5204, 5206/e, 5235, 5249, 5270/5271, 5272, 5280/5282, | ||
| 18 | * 5307 or 5407 specific addresses. | ||
| 19 | */ | ||
| 20 | #if defined(CONFIG_M5206) || defined(CONFIG_M5206e) | ||
| 21 | #include <asm/m5206sim.h> | ||
| 22 | #elif defined(CONFIG_M520x) | ||
| 23 | #include <asm/m520xsim.h> | ||
| 24 | #elif defined(CONFIG_M523x) | ||
| 25 | #include <asm/m523xsim.h> | ||
| 26 | #elif defined(CONFIG_M5249) | ||
| 27 | #include <asm/m5249sim.h> | ||
| 28 | #elif defined(CONFIG_M527x) | ||
| 29 | #include <asm/m527xsim.h> | ||
| 30 | #elif defined(CONFIG_M5272) | ||
| 31 | #include <asm/m5272sim.h> | ||
| 32 | #elif defined(CONFIG_M528x) | ||
| 33 | #include <asm/m528xsim.h> | ||
| 34 | #elif defined(CONFIG_M5307) | ||
| 35 | #include <asm/m5307sim.h> | ||
| 36 | #elif defined(CONFIG_M532x) | ||
| 37 | #include <asm/m532xsim.h> | ||
| 38 | #elif defined(CONFIG_M5407) | ||
| 39 | #include <asm/m5407sim.h> | ||
| 40 | #endif | ||
| 41 | |||
| 42 | |||
| 43 | /* | ||
| 44 | * Define the base address of the SIM within the MBAR address space. | ||
| 45 | */ | ||
| 46 | #define MCFSIM_BASE 0x0 /* Base address of SIM */ | ||
| 47 | |||
| 48 | |||
| 49 | /* | ||
| 50 | * Bit definitions for the ICR family of registers. | ||
| 51 | */ | ||
| 52 | #define MCFSIM_ICR_AUTOVEC 0x80 /* Auto-vectored intr */ | ||
| 53 | #define MCFSIM_ICR_LEVEL0 0x00 /* Level 0 intr */ | ||
| 54 | #define MCFSIM_ICR_LEVEL1 0x04 /* Level 1 intr */ | ||
| 55 | #define MCFSIM_ICR_LEVEL2 0x08 /* Level 2 intr */ | ||
| 56 | #define MCFSIM_ICR_LEVEL3 0x0c /* Level 3 intr */ | ||
| 57 | #define MCFSIM_ICR_LEVEL4 0x10 /* Level 4 intr */ | ||
| 58 | #define MCFSIM_ICR_LEVEL5 0x14 /* Level 5 intr */ | ||
| 59 | #define MCFSIM_ICR_LEVEL6 0x18 /* Level 6 intr */ | ||
| 60 | #define MCFSIM_ICR_LEVEL7 0x1c /* Level 7 intr */ | ||
| 61 | |||
| 62 | #define MCFSIM_ICR_PRI0 0x00 /* Priority 0 intr */ | ||
| 63 | #define MCFSIM_ICR_PRI1 0x01 /* Priority 1 intr */ | ||
| 64 | #define MCFSIM_ICR_PRI2 0x02 /* Priority 2 intr */ | ||
| 65 | #define MCFSIM_ICR_PRI3 0x03 /* Priority 3 intr */ | ||
| 66 | |||
| 67 | /* | ||
| 68 | * Bit definitions for the Interrupt Mask register (IMR). | ||
| 69 | */ | ||
| 70 | #define MCFSIM_IMR_EINT1 0x0002 /* External intr # 1 */ | ||
| 71 | #define MCFSIM_IMR_EINT2 0x0004 /* External intr # 2 */ | ||
| 72 | #define MCFSIM_IMR_EINT3 0x0008 /* External intr # 3 */ | ||
| 73 | #define MCFSIM_IMR_EINT4 0x0010 /* External intr # 4 */ | ||
| 74 | #define MCFSIM_IMR_EINT5 0x0020 /* External intr # 5 */ | ||
| 75 | #define MCFSIM_IMR_EINT6 0x0040 /* External intr # 6 */ | ||
| 76 | #define MCFSIM_IMR_EINT7 0x0080 /* External intr # 7 */ | ||
| 77 | |||
| 78 | #define MCFSIM_IMR_SWD 0x0100 /* Software Watchdog intr */ | ||
| 79 | #define MCFSIM_IMR_TIMER1 0x0200 /* TIMER 1 intr */ | ||
| 80 | #define MCFSIM_IMR_TIMER2 0x0400 /* TIMER 2 intr */ | ||
| 81 | #define MCFSIM_IMR_MBUS 0x0800 /* MBUS intr */ | ||
| 82 | #define MCFSIM_IMR_UART1 0x1000 /* UART 1 intr */ | ||
| 83 | #define MCFSIM_IMR_UART2 0x2000 /* UART 2 intr */ | ||
| 84 | |||
| 85 | #if defined(CONFIG_M5206e) | ||
| 86 | #define MCFSIM_IMR_DMA1 0x4000 /* DMA 1 intr */ | ||
| 87 | #define MCFSIM_IMR_DMA2 0x8000 /* DMA 2 intr */ | ||
| 88 | #elif defined(CONFIG_M5249) || defined(CONFIG_M5307) | ||
| 89 | #define MCFSIM_IMR_DMA0 0x4000 /* DMA 0 intr */ | ||
| 90 | #define MCFSIM_IMR_DMA1 0x8000 /* DMA 1 intr */ | ||
| 91 | #define MCFSIM_IMR_DMA2 0x10000 /* DMA 2 intr */ | ||
| 92 | #define MCFSIM_IMR_DMA3 0x20000 /* DMA 3 intr */ | ||
| 93 | #endif | ||
| 94 | |||
| 95 | /* | ||
| 96 | * Mask for all of the SIM devices. Some parts have more or less | ||
| 97 | * SIM devices. This is a catchall for the sandard set. | ||
| 98 | */ | ||
| 99 | #ifndef MCFSIM_IMR_MASKALL | ||
| 100 | #define MCFSIM_IMR_MASKALL 0x3ffe /* All intr sources */ | ||
| 101 | #endif | ||
| 102 | |||
| 103 | |||
| 104 | /* | ||
| 105 | * PIT interrupt settings, if not found in mXXXXsim.h file. | ||
| 106 | */ | ||
| 107 | #ifndef ICR_INTRCONF | ||
| 108 | #define ICR_INTRCONF 0x2b /* PIT1 level 5, priority 3 */ | ||
| 109 | #endif | ||
| 110 | #ifndef MCFPIT_IMR | ||
| 111 | #define MCFPIT_IMR MCFINTC_IMRH | ||
| 112 | #endif | ||
| 113 | #ifndef MCFPIT_IMR_IBIT | ||
| 114 | #define MCFPIT_IMR_IBIT (1 << (MCFINT_PIT1 - 32)) | ||
| 115 | #endif | ||
| 116 | |||
| 117 | |||
| 118 | #ifndef __ASSEMBLY__ | ||
| 119 | /* | ||
| 120 | * Definition for the interrupt auto-vectoring support. | ||
| 121 | */ | ||
| 122 | extern void mcf_autovector(unsigned int vec); | ||
| 123 | #endif /* __ASSEMBLY__ */ | ||
| 124 | |||
| 125 | /****************************************************************************/ | ||
| 126 | #endif /* mcfsim_h */ | ||
diff --git a/arch/m68knommu/include/asm/mcfsmc.h b/arch/m68knommu/include/asm/mcfsmc.h deleted file mode 100644 index 2d7a4dbd9683..000000000000 --- a/arch/m68knommu/include/asm/mcfsmc.h +++ /dev/null | |||
| @@ -1,187 +0,0 @@ | |||
| 1 | /****************************************************************************/ | ||
| 2 | |||
| 3 | /* | ||
| 4 | * mcfsmc.h -- SMC ethernet support for ColdFire environments. | ||
| 5 | * | ||
| 6 | * (C) Copyright 1999-2002, Greg Ungerer (gerg@snapgear.com) | ||
| 7 | * (C) Copyright 2000, Lineo Inc. (www.lineo.com) | ||
| 8 | */ | ||
| 9 | |||
| 10 | /****************************************************************************/ | ||
| 11 | #ifndef mcfsmc_h | ||
| 12 | #define mcfsmc_h | ||
| 13 | /****************************************************************************/ | ||
| 14 | |||
| 15 | /* | ||
| 16 | * None of the current ColdFire targets that use the SMC91x111 | ||
| 17 | * allow 8 bit accesses. So this code is 16bit access only. | ||
| 18 | */ | ||
| 19 | |||
| 20 | |||
| 21 | #undef outb | ||
| 22 | #undef inb | ||
| 23 | #undef outw | ||
| 24 | #undef outwd | ||
| 25 | #undef inw | ||
| 26 | #undef outl | ||
| 27 | #undef inl | ||
| 28 | |||
| 29 | #undef outsb | ||
| 30 | #undef outsw | ||
| 31 | #undef outsl | ||
| 32 | #undef insb | ||
| 33 | #undef insw | ||
| 34 | #undef insl | ||
| 35 | |||
| 36 | /* | ||
| 37 | * Re-defines for ColdFire environment... The SMC part is | ||
| 38 | * mapped into memory space, so remap the PC-style in/out | ||
| 39 | * routines to handle that. | ||
| 40 | */ | ||
| 41 | #define outb smc_outb | ||
| 42 | #define inb smc_inb | ||
| 43 | #define outw smc_outw | ||
| 44 | #define outwd smc_outwd | ||
| 45 | #define inw smc_inw | ||
| 46 | #define outl smc_outl | ||
| 47 | #define inl smc_inl | ||
| 48 | |||
| 49 | #define outsb smc_outsb | ||
| 50 | #define outsw smc_outsw | ||
| 51 | #define outsl smc_outsl | ||
| 52 | #define insb smc_insb | ||
| 53 | #define insw smc_insw | ||
| 54 | #define insl smc_insl | ||
| 55 | |||
| 56 | |||
| 57 | static inline int smc_inb(unsigned int addr) | ||
| 58 | { | ||
| 59 | register unsigned short w; | ||
| 60 | w = *((volatile unsigned short *) (addr & ~0x1)); | ||
| 61 | return(((addr & 0x1) ? w : (w >> 8)) & 0xff); | ||
| 62 | } | ||
| 63 | |||
| 64 | static inline void smc_outw(unsigned int val, unsigned int addr) | ||
| 65 | { | ||
| 66 | *((volatile unsigned short *) addr) = (val << 8) | (val >> 8); | ||
| 67 | } | ||
| 68 | |||
| 69 | static inline int smc_inw(unsigned int addr) | ||
| 70 | { | ||
| 71 | register unsigned short w; | ||
| 72 | w = *((volatile unsigned short *) addr); | ||
| 73 | return(((w << 8) | (w >> 8)) & 0xffff); | ||
| 74 | } | ||
| 75 | |||
| 76 | static inline void smc_outl(unsigned long val, unsigned int addr) | ||
| 77 | { | ||
| 78 | *((volatile unsigned long *) addr) = | ||
| 79 | ((val << 8) & 0xff000000) | ((val >> 8) & 0x00ff0000) | | ||
| 80 | ((val << 8) & 0x0000ff00) | ((val >> 8) & 0x000000ff); | ||
| 81 | } | ||
| 82 | |||
| 83 | static inline void smc_outwd(unsigned int val, unsigned int addr) | ||
| 84 | { | ||
| 85 | *((volatile unsigned short *) addr) = val; | ||
| 86 | } | ||
| 87 | |||
| 88 | |||
| 89 | /* | ||
| 90 | * The rep* functions are used to feed the data port with | ||
| 91 | * raw data. So we do not byte swap them when copying. | ||
| 92 | */ | ||
| 93 | |||
| 94 | static inline void smc_insb(unsigned int addr, void *vbuf, int unsigned long len) | ||
| 95 | { | ||
| 96 | volatile unsigned short *rp; | ||
| 97 | unsigned short *buf, *ebuf; | ||
| 98 | |||
| 99 | buf = (unsigned short *) vbuf; | ||
| 100 | rp = (volatile unsigned short *) addr; | ||
| 101 | |||
| 102 | /* Copy as words for as long as possible */ | ||
| 103 | for (ebuf = buf + (len >> 1); (buf < ebuf); ) | ||
| 104 | *buf++ = *rp; | ||
| 105 | |||
| 106 | /* Lastly, handle left over byte */ | ||
| 107 | if (len & 0x1) | ||
| 108 | *((unsigned char *) buf) = (*rp >> 8) & 0xff; | ||
| 109 | } | ||
| 110 | |||
| 111 | static inline void smc_insw(unsigned int addr, void *vbuf, unsigned long len) | ||
| 112 | { | ||
| 113 | volatile unsigned short *rp; | ||
| 114 | unsigned short *buf, *ebuf; | ||
| 115 | |||
| 116 | buf = (unsigned short *) vbuf; | ||
| 117 | rp = (volatile unsigned short *) addr; | ||
| 118 | for (ebuf = buf + len; (buf < ebuf); ) | ||
| 119 | *buf++ = *rp; | ||
| 120 | } | ||
| 121 | |||
| 122 | static inline void smc_insl(unsigned int addr, void *vbuf, unsigned long len) | ||
| 123 | { | ||
| 124 | volatile unsigned long *rp; | ||
| 125 | unsigned long *buf, *ebuf; | ||
| 126 | |||
| 127 | buf = (unsigned long *) vbuf; | ||
| 128 | rp = (volatile unsigned long *) addr; | ||
| 129 | for (ebuf = buf + len; (buf < ebuf); ) | ||
| 130 | *buf++ = *rp; | ||
| 131 | } | ||
| 132 | |||
| 133 | static inline void smc_outsw(unsigned int addr, const void *vbuf, unsigned long len) | ||
| 134 | { | ||
| 135 | volatile unsigned short *rp; | ||
| 136 | unsigned short *buf, *ebuf; | ||
| 137 | |||
| 138 | buf = (unsigned short *) vbuf; | ||
| 139 | rp = (volatile unsigned short *) addr; | ||
| 140 | for (ebuf = buf + len; (buf < ebuf); ) | ||
| 141 | *rp = *buf++; | ||
| 142 | } | ||
| 143 | |||
| 144 | static inline void smc_outsl(unsigned int addr, void *vbuf, unsigned long len) | ||
| 145 | { | ||
| 146 | volatile unsigned long *rp; | ||
| 147 | unsigned long *buf, *ebuf; | ||
| 148 | |||
| 149 | buf = (unsigned long *) vbuf; | ||
| 150 | rp = (volatile unsigned long *) addr; | ||
| 151 | for (ebuf = buf + len; (buf < ebuf); ) | ||
| 152 | *rp = *buf++; | ||
| 153 | } | ||
| 154 | |||
| 155 | |||
| 156 | #ifdef CONFIG_NETtel | ||
| 157 | /* | ||
| 158 | * Re-map the address space of at least one of the SMC ethernet | ||
| 159 | * parts. Both parts power up decoding the same address, so we | ||
| 160 | * need to move one of them first, before doing enything else. | ||
| 161 | * | ||
| 162 | * We also increase the number of wait states for this part by one. | ||
| 163 | */ | ||
| 164 | |||
| 165 | void smc_remap(unsigned int ioaddr) | ||
| 166 | { | ||
| 167 | static int once = 0; | ||
| 168 | extern unsigned short ppdata; | ||
| 169 | if (once++ == 0) { | ||
| 170 | *((volatile unsigned short *)(MCF_MBAR+MCFSIM_PADDR)) = 0x00ec; | ||
| 171 | ppdata |= 0x0080; | ||
| 172 | *((volatile unsigned short *)(MCF_MBAR+MCFSIM_PADAT)) = ppdata; | ||
| 173 | outw(0x0001, ioaddr + BANK_SELECT); | ||
| 174 | outw(0x0001, ioaddr + BANK_SELECT); | ||
| 175 | outw(0x0067, ioaddr + BASE); | ||
| 176 | |||
| 177 | ppdata &= ~0x0080; | ||
| 178 | *((volatile unsigned short *)(MCF_MBAR+MCFSIM_PADAT)) = ppdata; | ||
| 179 | } | ||
| 180 | |||
| 181 | *((volatile unsigned short *)(MCF_MBAR+MCFSIM_CSCR3)) = 0x1180; | ||
| 182 | } | ||
| 183 | |||
| 184 | #endif | ||
| 185 | |||
| 186 | /****************************************************************************/ | ||
| 187 | #endif /* mcfsmc_h */ | ||
diff --git a/arch/m68knommu/include/asm/mcftimer.h b/arch/m68knommu/include/asm/mcftimer.h deleted file mode 100644 index 0f90f6d2227a..000000000000 --- a/arch/m68knommu/include/asm/mcftimer.h +++ /dev/null | |||
| @@ -1,80 +0,0 @@ | |||
| 1 | /****************************************************************************/ | ||
| 2 | |||
| 3 | /* | ||
| 4 | * mcftimer.h -- ColdFire internal TIMER support defines. | ||
| 5 | * | ||
| 6 | * (C) Copyright 1999-2006, Greg Ungerer <gerg@snapgear.com> | ||
| 7 | * (C) Copyright 2000, Lineo Inc. (www.lineo.com) | ||
| 8 | */ | ||
| 9 | |||
| 10 | /****************************************************************************/ | ||
| 11 | #ifndef mcftimer_h | ||
| 12 | #define mcftimer_h | ||
| 13 | /****************************************************************************/ | ||
| 14 | |||
| 15 | |||
| 16 | /* | ||
| 17 | * Get address specific defines for this ColdFire member. | ||
| 18 | */ | ||
| 19 | #if defined(CONFIG_M5206) || defined(CONFIG_M5206e) | ||
| 20 | #define MCFTIMER_BASE1 0x100 /* Base address of TIMER1 */ | ||
| 21 | #define MCFTIMER_BASE2 0x120 /* Base address of TIMER2 */ | ||
| 22 | #elif defined(CONFIG_M5272) | ||
| 23 | #define MCFTIMER_BASE1 0x200 /* Base address of TIMER1 */ | ||
| 24 | #define MCFTIMER_BASE2 0x220 /* Base address of TIMER2 */ | ||
| 25 | #define MCFTIMER_BASE3 0x240 /* Base address of TIMER4 */ | ||
| 26 | #define MCFTIMER_BASE4 0x260 /* Base address of TIMER3 */ | ||
| 27 | #elif defined(CONFIG_M5249) || defined(CONFIG_M5307) || defined(CONFIG_M5407) | ||
| 28 | #define MCFTIMER_BASE1 0x140 /* Base address of TIMER1 */ | ||
| 29 | #define MCFTIMER_BASE2 0x180 /* Base address of TIMER2 */ | ||
| 30 | #elif defined(CONFIG_M532x) | ||
| 31 | #define MCFTIMER_BASE1 0xfc070000 /* Base address of TIMER1 */ | ||
| 32 | #define MCFTIMER_BASE2 0xfc074000 /* Base address of TIMER2 */ | ||
| 33 | #define MCFTIMER_BASE3 0xfc078000 /* Base address of TIMER3 */ | ||
| 34 | #define MCFTIMER_BASE4 0xfc07c000 /* Base address of TIMER4 */ | ||
| 35 | #endif | ||
| 36 | |||
| 37 | |||
| 38 | /* | ||
| 39 | * Define the TIMER register set addresses. | ||
| 40 | */ | ||
| 41 | #define MCFTIMER_TMR 0x00 /* Timer Mode reg (r/w) */ | ||
| 42 | #define MCFTIMER_TRR 0x04 /* Timer Reference (r/w) */ | ||
| 43 | #define MCFTIMER_TCR 0x08 /* Timer Capture reg (r/w) */ | ||
| 44 | #define MCFTIMER_TCN 0x0C /* Timer Counter reg (r/w) */ | ||
| 45 | #if defined(CONFIG_M532x) | ||
| 46 | #define MCFTIMER_TER 0x03 /* Timer Event reg (r/w) */ | ||
| 47 | #else | ||
| 48 | #define MCFTIMER_TER 0x11 /* Timer Event reg (r/w) */ | ||
| 49 | #endif | ||
| 50 | |||
| 51 | /* | ||
| 52 | * Bit definitions for the Timer Mode Register (TMR). | ||
| 53 | * Register bit flags are common accross ColdFires. | ||
| 54 | */ | ||
| 55 | #define MCFTIMER_TMR_PREMASK 0xff00 /* Prescalar mask */ | ||
| 56 | #define MCFTIMER_TMR_DISCE 0x0000 /* Disable capture */ | ||
| 57 | #define MCFTIMER_TMR_ANYCE 0x00c0 /* Capture any edge */ | ||
| 58 | #define MCFTIMER_TMR_FALLCE 0x0080 /* Capture fallingedge */ | ||
| 59 | #define MCFTIMER_TMR_RISECE 0x0040 /* Capture rising edge */ | ||
| 60 | #define MCFTIMER_TMR_ENOM 0x0020 /* Enable output toggle */ | ||
| 61 | #define MCFTIMER_TMR_DISOM 0x0000 /* Do single output pulse */ | ||
| 62 | #define MCFTIMER_TMR_ENORI 0x0010 /* Enable ref interrupt */ | ||
| 63 | #define MCFTIMER_TMR_DISORI 0x0000 /* Disable ref interrupt */ | ||
| 64 | #define MCFTIMER_TMR_RESTART 0x0008 /* Restart counter */ | ||
| 65 | #define MCFTIMER_TMR_FREERUN 0x0000 /* Free running counter */ | ||
| 66 | #define MCFTIMER_TMR_CLKTIN 0x0006 /* Input clock is TIN */ | ||
| 67 | #define MCFTIMER_TMR_CLK16 0x0004 /* Input clock is /16 */ | ||
| 68 | #define MCFTIMER_TMR_CLK1 0x0002 /* Input clock is /1 */ | ||
| 69 | #define MCFTIMER_TMR_CLKSTOP 0x0000 /* Stop counter */ | ||
| 70 | #define MCFTIMER_TMR_ENABLE 0x0001 /* Enable timer */ | ||
| 71 | #define MCFTIMER_TMR_DISABLE 0x0000 /* Disable timer */ | ||
| 72 | |||
| 73 | /* | ||
| 74 | * Bit definitions for the Timer Event Registers (TER). | ||
| 75 | */ | ||
| 76 | #define MCFTIMER_TER_CAP 0x01 /* Capture event */ | ||
| 77 | #define MCFTIMER_TER_REF 0x02 /* Refernece event */ | ||
| 78 | |||
| 79 | /****************************************************************************/ | ||
| 80 | #endif /* mcftimer_h */ | ||
diff --git a/arch/m68knommu/include/asm/mcfuart.h b/arch/m68knommu/include/asm/mcfuart.h deleted file mode 100644 index ef2293873612..000000000000 --- a/arch/m68knommu/include/asm/mcfuart.h +++ /dev/null | |||
| @@ -1,216 +0,0 @@ | |||
| 1 | /****************************************************************************/ | ||
| 2 | |||
| 3 | /* | ||
| 4 | * mcfuart.h -- ColdFire internal UART support defines. | ||
| 5 | * | ||
| 6 | * (C) Copyright 1999-2003, Greg Ungerer (gerg@snapgear.com) | ||
| 7 | * (C) Copyright 2000, Lineo Inc. (www.lineo.com) | ||
| 8 | */ | ||
| 9 | |||
| 10 | /****************************************************************************/ | ||
| 11 | #ifndef mcfuart_h | ||
| 12 | #define mcfuart_h | ||
| 13 | /****************************************************************************/ | ||
| 14 | |||
| 15 | /* | ||
| 16 | * Define the base address of the UARTS within the MBAR address | ||
| 17 | * space. | ||
| 18 | */ | ||
| 19 | #if defined(CONFIG_M5272) | ||
| 20 | #define MCFUART_BASE1 0x100 /* Base address of UART1 */ | ||
| 21 | #define MCFUART_BASE2 0x140 /* Base address of UART2 */ | ||
| 22 | #elif defined(CONFIG_M5206) || defined(CONFIG_M5206e) | ||
| 23 | #if defined(CONFIG_NETtel) | ||
| 24 | #define MCFUART_BASE1 0x180 /* Base address of UART1 */ | ||
| 25 | #define MCFUART_BASE2 0x140 /* Base address of UART2 */ | ||
| 26 | #else | ||
| 27 | #define MCFUART_BASE1 0x140 /* Base address of UART1 */ | ||
| 28 | #define MCFUART_BASE2 0x180 /* Base address of UART2 */ | ||
| 29 | #endif | ||
| 30 | #elif defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x) | ||
| 31 | #define MCFUART_BASE1 0x200 /* Base address of UART1 */ | ||
| 32 | #define MCFUART_BASE2 0x240 /* Base address of UART2 */ | ||
| 33 | #define MCFUART_BASE3 0x280 /* Base address of UART3 */ | ||
| 34 | #elif defined(CONFIG_M5249) || defined(CONFIG_M5307) || defined(CONFIG_M5407) | ||
| 35 | #if defined(CONFIG_NETtel) || defined(CONFIG_SECUREEDGEMP3) | ||
| 36 | #define MCFUART_BASE1 0x200 /* Base address of UART1 */ | ||
| 37 | #define MCFUART_BASE2 0x1c0 /* Base address of UART2 */ | ||
| 38 | #else | ||
| 39 | #define MCFUART_BASE1 0x1c0 /* Base address of UART1 */ | ||
| 40 | #define MCFUART_BASE2 0x200 /* Base address of UART2 */ | ||
| 41 | #endif | ||
| 42 | #elif defined(CONFIG_M520x) | ||
| 43 | #define MCFUART_BASE1 0x60000 /* Base address of UART1 */ | ||
| 44 | #define MCFUART_BASE2 0x64000 /* Base address of UART2 */ | ||
| 45 | #define MCFUART_BASE3 0x68000 /* Base address of UART2 */ | ||
| 46 | #elif defined(CONFIG_M532x) | ||
| 47 | #define MCFUART_BASE1 0xfc060000 /* Base address of UART1 */ | ||
| 48 | #define MCFUART_BASE2 0xfc064000 /* Base address of UART2 */ | ||
| 49 | #define MCFUART_BASE3 0xfc068000 /* Base address of UART3 */ | ||
| 50 | #endif | ||
| 51 | |||
| 52 | |||
| 53 | #include <linux/serial_core.h> | ||
| 54 | #include <linux/platform_device.h> | ||
| 55 | |||
| 56 | struct mcf_platform_uart { | ||
| 57 | unsigned long mapbase; /* Physical address base */ | ||
| 58 | void __iomem *membase; /* Virtual address if mapped */ | ||
| 59 | unsigned int irq; /* Interrupt vector */ | ||
| 60 | unsigned int uartclk; /* UART clock rate */ | ||
| 61 | }; | ||
| 62 | |||
| 63 | /* | ||
| 64 | * Define the ColdFire UART register set addresses. | ||
| 65 | */ | ||
| 66 | #define MCFUART_UMR 0x00 /* Mode register (r/w) */ | ||
| 67 | #define MCFUART_USR 0x04 /* Status register (r) */ | ||
| 68 | #define MCFUART_UCSR 0x04 /* Clock Select (w) */ | ||
| 69 | #define MCFUART_UCR 0x08 /* Command register (w) */ | ||
| 70 | #define MCFUART_URB 0x0c /* Receiver Buffer (r) */ | ||
| 71 | #define MCFUART_UTB 0x0c /* Transmit Buffer (w) */ | ||
| 72 | #define MCFUART_UIPCR 0x10 /* Input Port Change (r) */ | ||
| 73 | #define MCFUART_UACR 0x10 /* Auxiliary Control (w) */ | ||
| 74 | #define MCFUART_UISR 0x14 /* Interrupt Status (r) */ | ||
| 75 | #define MCFUART_UIMR 0x14 /* Interrupt Mask (w) */ | ||
| 76 | #define MCFUART_UBG1 0x18 /* Baud Rate MSB (r/w) */ | ||
| 77 | #define MCFUART_UBG2 0x1c /* Baud Rate LSB (r/w) */ | ||
| 78 | #ifdef CONFIG_M5272 | ||
| 79 | #define MCFUART_UTF 0x28 /* Transmitter FIFO (r/w) */ | ||
| 80 | #define MCFUART_URF 0x2c /* Receiver FIFO (r/w) */ | ||
| 81 | #define MCFUART_UFPD 0x30 /* Frac Prec. Divider (r/w) */ | ||
| 82 | #else | ||
| 83 | #define MCFUART_UIVR 0x30 /* Interrupt Vector (r/w) */ | ||
| 84 | #endif | ||
| 85 | #define MCFUART_UIPR 0x34 /* Input Port (r) */ | ||
| 86 | #define MCFUART_UOP1 0x38 /* Output Port Bit Set (w) */ | ||
| 87 | #define MCFUART_UOP0 0x3c /* Output Port Bit Reset (w) */ | ||
| 88 | |||
| 89 | |||
| 90 | /* | ||
| 91 | * Define bit flags in Mode Register 1 (MR1). | ||
| 92 | */ | ||
| 93 | #define MCFUART_MR1_RXRTS 0x80 /* Auto RTS flow control */ | ||
| 94 | #define MCFUART_MR1_RXIRQFULL 0x40 /* RX IRQ type FULL */ | ||
| 95 | #define MCFUART_MR1_RXIRQRDY 0x00 /* RX IRQ type RDY */ | ||
| 96 | #define MCFUART_MR1_RXERRBLOCK 0x20 /* RX block error mode */ | ||
| 97 | #define MCFUART_MR1_RXERRCHAR 0x00 /* RX char error mode */ | ||
| 98 | |||
| 99 | #define MCFUART_MR1_PARITYNONE 0x10 /* No parity */ | ||
| 100 | #define MCFUART_MR1_PARITYEVEN 0x00 /* Even parity */ | ||
| 101 | #define MCFUART_MR1_PARITYODD 0x04 /* Odd parity */ | ||
| 102 | #define MCFUART_MR1_PARITYSPACE 0x08 /* Space parity */ | ||
| 103 | #define MCFUART_MR1_PARITYMARK 0x0c /* Mark parity */ | ||
| 104 | |||
| 105 | #define MCFUART_MR1_CS5 0x00 /* 5 bits per char */ | ||
| 106 | #define MCFUART_MR1_CS6 0x01 /* 6 bits per char */ | ||
| 107 | #define MCFUART_MR1_CS7 0x02 /* 7 bits per char */ | ||
| 108 | #define MCFUART_MR1_CS8 0x03 /* 8 bits per char */ | ||
| 109 | |||
| 110 | /* | ||
| 111 | * Define bit flags in Mode Register 2 (MR2). | ||
| 112 | */ | ||
| 113 | #define MCFUART_MR2_LOOPBACK 0x80 /* Loopback mode */ | ||
| 114 | #define MCFUART_MR2_REMOTELOOP 0xc0 /* Remote loopback mode */ | ||
| 115 | #define MCFUART_MR2_AUTOECHO 0x40 /* Automatic echo */ | ||
| 116 | #define MCFUART_MR2_TXRTS 0x20 /* Assert RTS on TX */ | ||
| 117 | #define MCFUART_MR2_TXCTS 0x10 /* Auto CTS flow control */ | ||
| 118 | |||
| 119 | #define MCFUART_MR2_STOP1 0x07 /* 1 stop bit */ | ||
| 120 | #define MCFUART_MR2_STOP15 0x08 /* 1.5 stop bits */ | ||
| 121 | #define MCFUART_MR2_STOP2 0x0f /* 2 stop bits */ | ||
| 122 | |||
| 123 | /* | ||
| 124 | * Define bit flags in Status Register (USR). | ||
| 125 | */ | ||
| 126 | #define MCFUART_USR_RXBREAK 0x80 /* Received BREAK */ | ||
| 127 | #define MCFUART_USR_RXFRAMING 0x40 /* Received framing error */ | ||
| 128 | #define MCFUART_USR_RXPARITY 0x20 /* Received parity error */ | ||
| 129 | #define MCFUART_USR_RXOVERRUN 0x10 /* Received overrun error */ | ||
| 130 | #define MCFUART_USR_TXEMPTY 0x08 /* Transmitter empty */ | ||
| 131 | #define MCFUART_USR_TXREADY 0x04 /* Transmitter ready */ | ||
| 132 | #define MCFUART_USR_RXFULL 0x02 /* Receiver full */ | ||
| 133 | #define MCFUART_USR_RXREADY 0x01 /* Receiver ready */ | ||
| 134 | |||
| 135 | #define MCFUART_USR_RXERR (MCFUART_USR_RXBREAK | MCFUART_USR_RXFRAMING | \ | ||
| 136 | MCFUART_USR_RXPARITY | MCFUART_USR_RXOVERRUN) | ||
| 137 | |||
| 138 | /* | ||
| 139 | * Define bit flags in Clock Select Register (UCSR). | ||
| 140 | */ | ||
| 141 | #define MCFUART_UCSR_RXCLKTIMER 0xd0 /* RX clock is timer */ | ||
| 142 | #define MCFUART_UCSR_RXCLKEXT16 0xe0 /* RX clock is external x16 */ | ||
| 143 | #define MCFUART_UCSR_RXCLKEXT1 0xf0 /* RX clock is external x1 */ | ||
| 144 | |||
| 145 | #define MCFUART_UCSR_TXCLKTIMER 0x0d /* TX clock is timer */ | ||
| 146 | #define MCFUART_UCSR_TXCLKEXT16 0x0e /* TX clock is external x16 */ | ||
| 147 | #define MCFUART_UCSR_TXCLKEXT1 0x0f /* TX clock is external x1 */ | ||
| 148 | |||
| 149 | /* | ||
| 150 | * Define bit flags in Command Register (UCR). | ||
| 151 | */ | ||
| 152 | #define MCFUART_UCR_CMDNULL 0x00 /* No command */ | ||
| 153 | #define MCFUART_UCR_CMDRESETMRPTR 0x10 /* Reset MR pointer */ | ||
| 154 | #define MCFUART_UCR_CMDRESETRX 0x20 /* Reset receiver */ | ||
| 155 | #define MCFUART_UCR_CMDRESETTX 0x30 /* Reset transmitter */ | ||
| 156 | #define MCFUART_UCR_CMDRESETERR 0x40 /* Reset error status */ | ||
| 157 | #define MCFUART_UCR_CMDRESETBREAK 0x50 /* Reset BREAK change */ | ||
| 158 | #define MCFUART_UCR_CMDBREAKSTART 0x60 /* Start BREAK */ | ||
| 159 | #define MCFUART_UCR_CMDBREAKSTOP 0x70 /* Stop BREAK */ | ||
| 160 | |||
| 161 | #define MCFUART_UCR_TXNULL 0x00 /* No TX command */ | ||
| 162 | #define MCFUART_UCR_TXENABLE 0x04 /* Enable TX */ | ||
| 163 | #define MCFUART_UCR_TXDISABLE 0x08 /* Disable TX */ | ||
| 164 | #define MCFUART_UCR_RXNULL 0x00 /* No RX command */ | ||
| 165 | #define MCFUART_UCR_RXENABLE 0x01 /* Enable RX */ | ||
| 166 | #define MCFUART_UCR_RXDISABLE 0x02 /* Disable RX */ | ||
| 167 | |||
| 168 | /* | ||
| 169 | * Define bit flags in Input Port Change Register (UIPCR). | ||
| 170 | */ | ||
| 171 | #define MCFUART_UIPCR_CTSCOS 0x10 /* CTS change of state */ | ||
| 172 | #define MCFUART_UIPCR_CTS 0x01 /* CTS value */ | ||
| 173 | |||
| 174 | /* | ||
| 175 | * Define bit flags in Input Port Register (UIP). | ||
| 176 | */ | ||
| 177 | #define MCFUART_UIPR_CTS 0x01 /* CTS value */ | ||
| 178 | |||
| 179 | /* | ||
| 180 | * Define bit flags in Output Port Registers (UOP). | ||
| 181 | * Clear bit by writing to UOP0, set by writing to UOP1. | ||
| 182 | */ | ||
| 183 | #define MCFUART_UOP_RTS 0x01 /* RTS set or clear */ | ||
| 184 | |||
| 185 | /* | ||
| 186 | * Define bit flags in the Auxiliary Control Register (UACR). | ||
| 187 | */ | ||
| 188 | #define MCFUART_UACR_IEC 0x01 /* Input enable control */ | ||
| 189 | |||
| 190 | /* | ||
| 191 | * Define bit flags in Interrupt Status Register (UISR). | ||
| 192 | * These same bits are used for the Interrupt Mask Register (UIMR). | ||
| 193 | */ | ||
| 194 | #define MCFUART_UIR_COS 0x80 /* Change of state (CTS) */ | ||
| 195 | #define MCFUART_UIR_DELTABREAK 0x04 /* Break start or stop */ | ||
| 196 | #define MCFUART_UIR_RXREADY 0x02 /* Receiver ready */ | ||
| 197 | #define MCFUART_UIR_TXREADY 0x01 /* Transmitter ready */ | ||
| 198 | |||
| 199 | #ifdef CONFIG_M5272 | ||
| 200 | /* | ||
| 201 | * Define bit flags in the Transmitter FIFO Register (UTF). | ||
| 202 | */ | ||
| 203 | #define MCFUART_UTF_TXB 0x1f /* Transmitter data level */ | ||
| 204 | #define MCFUART_UTF_FULL 0x20 /* Transmitter fifo full */ | ||
| 205 | #define MCFUART_UTF_TXS 0xc0 /* Transmitter status */ | ||
| 206 | |||
| 207 | /* | ||
| 208 | * Define bit flags in the Receiver FIFO Register (URF). | ||
| 209 | */ | ||
| 210 | #define MCFUART_URF_RXB 0x1f /* Receiver data level */ | ||
| 211 | #define MCFUART_URF_FULL 0x20 /* Receiver fifo full */ | ||
| 212 | #define MCFUART_URF_RXS 0xc0 /* Receiver status */ | ||
| 213 | #endif | ||
| 214 | |||
| 215 | /****************************************************************************/ | ||
| 216 | #endif /* mcfuart_h */ | ||
diff --git a/arch/m68knommu/include/asm/mcfwdebug.h b/arch/m68knommu/include/asm/mcfwdebug.h deleted file mode 100644 index 27f70e45d700..000000000000 --- a/arch/m68knommu/include/asm/mcfwdebug.h +++ /dev/null | |||
| @@ -1,118 +0,0 @@ | |||
| 1 | /****************************************************************************/ | ||
| 2 | |||
| 3 | /* | ||
| 4 | * mcfdebug.h -- ColdFire Debug Module support. | ||
| 5 | * | ||
| 6 | * (C) Copyright 2001, Lineo Inc. (www.lineo.com) | ||
| 7 | */ | ||
| 8 | |||
| 9 | /****************************************************************************/ | ||
| 10 | #ifndef mcfdebug_h | ||
| 11 | #define mcfdebug_h | ||
| 12 | /****************************************************************************/ | ||
| 13 | |||
| 14 | /* Define the debug module registers */ | ||
| 15 | #define MCFDEBUG_CSR 0x0 /* Configuration status */ | ||
| 16 | #define MCFDEBUG_BAAR 0x5 /* BDM address attribute */ | ||
| 17 | #define MCFDEBUG_AATR 0x6 /* Address attribute trigger */ | ||
| 18 | #define MCFDEBUG_TDR 0x7 /* Trigger definition */ | ||
| 19 | #define MCFDEBUG_PBR 0x8 /* PC breakpoint */ | ||
| 20 | #define MCFDEBUG_PBMR 0x9 /* PC breakpoint mask */ | ||
| 21 | #define MCFDEBUG_ABHR 0xc /* High address breakpoint */ | ||
| 22 | #define MCFDEBUG_ABLR 0xd /* Low address breakpoint */ | ||
| 23 | #define MCFDEBUG_DBR 0xe /* Data breakpoint */ | ||
| 24 | #define MCFDEBUG_DBMR 0xf /* Data breakpoint mask */ | ||
| 25 | |||
| 26 | /* Define some handy constants for the trigger definition register */ | ||
| 27 | #define MCFDEBUG_TDR_TRC_DISP 0x00000000 /* display on DDATA only */ | ||
| 28 | #define MCFDEBUG_TDR_TRC_HALT 0x40000000 /* Processor halt on BP */ | ||
| 29 | #define MCFDEBUG_TDR_TRC_INTR 0x80000000 /* Debug intr on BP */ | ||
| 30 | #define MCFDEBUG_TDR_LXT1 0x00004000 /* TDR level 1 */ | ||
| 31 | #define MCFDEBUG_TDR_LXT2 0x00008000 /* TDR level 2 */ | ||
| 32 | #define MCFDEBUG_TDR_EBL1 0x00002000 /* Enable breakpoint level 1 */ | ||
| 33 | #define MCFDEBUG_TDR_EBL2 0x20000000 /* Enable breakpoint level 2 */ | ||
| 34 | #define MCFDEBUG_TDR_EDLW1 0x00001000 /* Enable data BP longword */ | ||
| 35 | #define MCFDEBUG_TDR_EDLW2 0x10000000 | ||
| 36 | #define MCFDEBUG_TDR_EDWL1 0x00000800 /* Enable data BP lower word */ | ||
| 37 | #define MCFDEBUG_TDR_EDWL2 0x08000000 | ||
| 38 | #define MCFDEBUG_TDR_EDWU1 0x00000400 /* Enable data BP upper word */ | ||
| 39 | #define MCFDEBUG_TDR_EDWU2 0x04000000 | ||
| 40 | #define MCFDEBUG_TDR_EDLL1 0x00000200 /* Enable data BP low low byte */ | ||
| 41 | #define MCFDEBUG_TDR_EDLL2 0x02000000 | ||
| 42 | #define MCFDEBUG_TDR_EDLM1 0x00000100 /* Enable data BP low mid byte */ | ||
| 43 | #define MCFDEBUG_TDR_EDLM2 0x01000000 | ||
| 44 | #define MCFDEBUG_TDR_EDUM1 0x00000080 /* Enable data BP up mid byte */ | ||
| 45 | #define MCFDEBUG_TDR_EDUM2 0x00800000 | ||
| 46 | #define MCFDEBUG_TDR_EDUU1 0x00000040 /* Enable data BP up up byte */ | ||
| 47 | #define MCFDEBUG_TDR_EDUU2 0x00400000 | ||
| 48 | #define MCFDEBUG_TDR_DI1 0x00000020 /* Data BP invert */ | ||
| 49 | #define MCFDEBUG_TDR_DI2 0x00200000 | ||
| 50 | #define MCFDEBUG_TDR_EAI1 0x00000010 /* Enable address BP inverted */ | ||
| 51 | #define MCFDEBUG_TDR_EAI2 0x00100000 | ||
| 52 | #define MCFDEBUG_TDR_EAR1 0x00000008 /* Enable address BP range */ | ||
| 53 | #define MCFDEBUG_TDR_EAR2 0x00080000 | ||
| 54 | #define MCFDEBUG_TDR_EAL1 0x00000004 /* Enable address BP low */ | ||
| 55 | #define MCFDEBUG_TDR_EAL2 0x00040000 | ||
| 56 | #define MCFDEBUG_TDR_EPC1 0x00000002 /* Enable PC BP */ | ||
| 57 | #define MCFDEBUG_TDR_EPC2 0x00020000 | ||
| 58 | #define MCFDEBUG_TDR_PCI1 0x00000001 /* PC BP invert */ | ||
| 59 | #define MCFDEBUG_TDR_PCI2 0x00010000 | ||
| 60 | |||
| 61 | /* Constants for the address attribute trigger register */ | ||
| 62 | #define MCFDEBUG_AAR_RESET 0x00000005 | ||
| 63 | /* Fields not yet implemented */ | ||
| 64 | |||
| 65 | /* And some definitions for the writable sections of the CSR */ | ||
| 66 | #define MCFDEBUG_CSR_RESET 0x00100000 | ||
| 67 | #define MCFDEBUG_CSR_PSTCLK 0x00020000 /* PSTCLK disable */ | ||
| 68 | #define MCFDEBUG_CSR_IPW 0x00010000 /* Inhibit processor writes */ | ||
| 69 | #define MCFDEBUG_CSR_MAP 0x00008000 /* Processor refs in emul mode */ | ||
| 70 | #define MCFDEBUG_CSR_TRC 0x00004000 /* Emul mode on trace exception */ | ||
| 71 | #define MCFDEBUG_CSR_EMU 0x00002000 /* Force emulation mode */ | ||
| 72 | #define MCFDEBUG_CSR_DDC_READ 0x00000800 /* Debug data control */ | ||
| 73 | #define MCFDEBUG_CSR_DDC_WRITE 0x00001000 | ||
| 74 | #define MCFDEBUG_CSR_UHE 0x00000400 /* User mode halt enable */ | ||
| 75 | #define MCFDEBUG_CSR_BTB0 0x00000000 /* Branch target 0 bytes */ | ||
| 76 | #define MCFDEBUG_CSR_BTB2 0x00000100 /* Branch target 2 bytes */ | ||
| 77 | #define MCFDEBUG_CSR_BTB3 0x00000200 /* Branch target 3 bytes */ | ||
| 78 | #define MCFDEBUG_CSR_BTB4 0x00000300 /* Branch target 4 bytes */ | ||
| 79 | #define MCFDEBUG_CSR_NPL 0x00000040 /* Non-pipelined mode */ | ||
| 80 | #define MCFDEBUG_CSR_SSM 0x00000010 /* Single step mode */ | ||
| 81 | |||
| 82 | /* Constants for the BDM address attribute register */ | ||
| 83 | #define MCFDEBUG_BAAR_RESET 0x00000005 | ||
| 84 | /* Fields not yet implemented */ | ||
| 85 | |||
| 86 | |||
| 87 | /* This routine wrappers up the wdebug asm instruction so that the register | ||
| 88 | * and value can be relatively easily specified. The biggest hassle here is | ||
| 89 | * that the debug module instructions (2 longs) must be long word aligned and | ||
| 90 | * some pointer fiddling is performed to ensure this. | ||
| 91 | */ | ||
| 92 | static inline void wdebug(int reg, unsigned long data) { | ||
| 93 | unsigned short dbg_spc[6]; | ||
| 94 | unsigned short *dbg; | ||
| 95 | |||
| 96 | // Force alignment to long word boundary | ||
| 97 | dbg = (unsigned short *)((((unsigned long)dbg_spc) + 3) & 0xfffffffc); | ||
| 98 | |||
| 99 | // Build up the debug instruction | ||
| 100 | dbg[0] = 0x2c80 | (reg & 0xf); | ||
| 101 | dbg[1] = (data >> 16) & 0xffff; | ||
| 102 | dbg[2] = data & 0xffff; | ||
| 103 | dbg[3] = 0; | ||
| 104 | |||
| 105 | // Perform the wdebug instruction | ||
| 106 | #if 0 | ||
| 107 | // This strain is for gas which doesn't have the wdebug instructions defined | ||
| 108 | asm( "move.l %0, %%a0\n\t" | ||
| 109 | ".word 0xfbd0\n\t" | ||
| 110 | ".word 0x0003\n\t" | ||
| 111 | :: "g" (dbg) : "a0"); | ||
| 112 | #else | ||
| 113 | // And this is for when it does | ||
| 114 | asm( "wdebug (%0)" :: "a" (dbg)); | ||
| 115 | #endif | ||
| 116 | } | ||
| 117 | |||
| 118 | #endif | ||
diff --git a/arch/m68knommu/include/asm/md.h b/arch/m68knommu/include/asm/md.h deleted file mode 100644 index d810c78de5ff..000000000000 --- a/arch/m68knommu/include/asm/md.h +++ /dev/null | |||
| @@ -1 +0,0 @@ | |||
| 1 | #include <asm-m68k/md.h> | ||
diff --git a/arch/m68knommu/include/asm/mman.h b/arch/m68knommu/include/asm/mman.h deleted file mode 100644 index 4846c682efed..000000000000 --- a/arch/m68knommu/include/asm/mman.h +++ /dev/null | |||
| @@ -1 +0,0 @@ | |||
| 1 | #include <asm-m68k/mman.h> | ||
diff --git a/arch/m68knommu/include/asm/mmu.h b/arch/m68knommu/include/asm/mmu.h deleted file mode 100644 index e2da1e6f09fe..000000000000 --- a/arch/m68knommu/include/asm/mmu.h +++ /dev/null | |||
| @@ -1,10 +0,0 @@ | |||
| 1 | #ifndef __M68KNOMMU_MMU_H | ||
| 2 | #define __M68KNOMMU_MMU_H | ||
| 3 | |||
| 4 | /* Copyright (C) 2002, David McCullough <davidm@snapgear.com> */ | ||
| 5 | |||
| 6 | typedef struct { | ||
| 7 | unsigned long end_brk; | ||
| 8 | } mm_context_t; | ||
| 9 | |||
| 10 | #endif /* __M68KNOMMU_MMU_H */ | ||
diff --git a/arch/m68knommu/include/asm/mmu_context.h b/arch/m68knommu/include/asm/mmu_context.h deleted file mode 100644 index 9ccee4278c97..000000000000 --- a/arch/m68knommu/include/asm/mmu_context.h +++ /dev/null | |||
| @@ -1,33 +0,0 @@ | |||
| 1 | #ifndef __M68KNOMMU_MMU_CONTEXT_H | ||
| 2 | #define __M68KNOMMU_MMU_CONTEXT_H | ||
| 3 | |||
| 4 | #include <asm/setup.h> | ||
| 5 | #include <asm/page.h> | ||
| 6 | #include <asm/pgalloc.h> | ||
| 7 | #include <asm-generic/mm_hooks.h> | ||
| 8 | |||
| 9 | static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk) | ||
| 10 | { | ||
| 11 | } | ||
| 12 | |||
| 13 | static inline int | ||
| 14 | init_new_context(struct task_struct *tsk, struct mm_struct *mm) | ||
| 15 | { | ||
| 16 | // mm->context = virt_to_phys(mm->pgd); | ||
| 17 | return(0); | ||
| 18 | } | ||
| 19 | |||
| 20 | #define destroy_context(mm) do { } while(0) | ||
| 21 | |||
| 22 | static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, struct task_struct *tsk) | ||
| 23 | { | ||
| 24 | } | ||
| 25 | |||
| 26 | #define deactivate_mm(tsk,mm) do { } while (0) | ||
| 27 | |||
| 28 | static inline void activate_mm(struct mm_struct *prev_mm, | ||
| 29 | struct mm_struct *next_mm) | ||
| 30 | { | ||
| 31 | } | ||
| 32 | |||
| 33 | #endif | ||
diff --git a/arch/m68knommu/include/asm/module.h b/arch/m68knommu/include/asm/module.h deleted file mode 100644 index 2e45ab50b232..000000000000 --- a/arch/m68knommu/include/asm/module.h +++ /dev/null | |||
| @@ -1,11 +0,0 @@ | |||
| 1 | #ifndef ASM_M68KNOMMU_MODULE_H | ||
| 2 | #define ASM_M68KNOMMU_MODULE_H | ||
| 3 | |||
| 4 | struct mod_arch_specific { | ||
| 5 | }; | ||
| 6 | |||
| 7 | #define Elf_Shdr Elf32_Shdr | ||
| 8 | #define Elf_Sym Elf32_Sym | ||
| 9 | #define Elf_Ehdr Elf32_Ehdr | ||
| 10 | |||
| 11 | #endif /* ASM_M68KNOMMU_MODULE_H */ | ||
diff --git a/arch/m68knommu/include/asm/movs.h b/arch/m68knommu/include/asm/movs.h deleted file mode 100644 index 81a16779e833..000000000000 --- a/arch/m68knommu/include/asm/movs.h +++ /dev/null | |||
| @@ -1 +0,0 @@ | |||
| 1 | #include <asm-m68k/movs.h> | ||
diff --git a/arch/m68knommu/include/asm/msgbuf.h b/arch/m68knommu/include/asm/msgbuf.h deleted file mode 100644 index bdfadec4d52d..000000000000 --- a/arch/m68knommu/include/asm/msgbuf.h +++ /dev/null | |||
| @@ -1 +0,0 @@ | |||
| 1 | #include <asm-m68k/msgbuf.h> | ||
diff --git a/arch/m68knommu/include/asm/mutex.h b/arch/m68knommu/include/asm/mutex.h deleted file mode 100644 index 458c1f7fbc18..000000000000 --- a/arch/m68knommu/include/asm/mutex.h +++ /dev/null | |||
| @@ -1,9 +0,0 @@ | |||
| 1 | /* | ||
| 2 | * Pull in the generic implementation for the mutex fastpath. | ||
| 3 | * | ||
| 4 | * TODO: implement optimized primitives instead, or leave the generic | ||
| 5 | * implementation in place, or pick the atomic_xchg() based generic | ||
| 6 | * implementation. (see asm-generic/mutex-xchg.h for details) | ||
| 7 | */ | ||
| 8 | |||
| 9 | #include <asm-generic/mutex-dec.h> | ||
diff --git a/arch/m68knommu/include/asm/nettel.h b/arch/m68knommu/include/asm/nettel.h deleted file mode 100644 index 0299f6a2deeb..000000000000 --- a/arch/m68knommu/include/asm/nettel.h +++ /dev/null | |||
| @@ -1,108 +0,0 @@ | |||
| 1 | /****************************************************************************/ | ||
| 2 | |||
| 3 | /* | ||
| 4 | * nettel.h -- Lineo (formerly Moreton Bay) NETtel support. | ||
| 5 | * | ||
| 6 | * (C) Copyright 1999-2000, Moreton Bay (www.moretonbay.com) | ||
| 7 | * (C) Copyright 2000-2001, Lineo Inc. (www.lineo.com) | ||
| 8 | * (C) Copyright 2001-2002, SnapGear Inc., (www.snapgear.com) | ||
| 9 | */ | ||
| 10 | |||
| 11 | /****************************************************************************/ | ||
| 12 | #ifndef nettel_h | ||
| 13 | #define nettel_h | ||
| 14 | /****************************************************************************/ | ||
| 15 | |||
| 16 | |||
| 17 | /****************************************************************************/ | ||
| 18 | #ifdef CONFIG_NETtel | ||
| 19 | /****************************************************************************/ | ||
| 20 | |||
| 21 | #ifdef CONFIG_COLDFIRE | ||
| 22 | #include <asm/coldfire.h> | ||
| 23 | #include <asm/mcfsim.h> | ||
| 24 | #endif | ||
| 25 | |||
| 26 | /*---------------------------------------------------------------------------*/ | ||
| 27 | #if defined(CONFIG_M5307) | ||
| 28 | /* | ||
| 29 | * NETtel/5307 based hardware first. DTR/DCD lines are wired to | ||
| 30 | * GPIO lines. Most of the LED's are driver through a latch | ||
| 31 | * connected to CS2. | ||
| 32 | */ | ||
| 33 | #define MCFPP_DCD1 0x0001 | ||
| 34 | #define MCFPP_DCD0 0x0002 | ||
| 35 | #define MCFPP_DTR1 0x0004 | ||
| 36 | #define MCFPP_DTR0 0x0008 | ||
| 37 | |||
| 38 | #define NETtel_LEDADDR 0x30400000 | ||
| 39 | |||
| 40 | #ifndef __ASSEMBLY__ | ||
| 41 | |||
| 42 | extern volatile unsigned short ppdata; | ||
| 43 | |||
| 44 | /* | ||
| 45 | * These functions defined to give quasi generic access to the | ||
| 46 | * PPIO bits used for DTR/DCD. | ||
| 47 | */ | ||
| 48 | static __inline__ unsigned int mcf_getppdata(void) | ||
| 49 | { | ||
| 50 | volatile unsigned short *pp; | ||
| 51 | pp = (volatile unsigned short *) (MCF_MBAR + MCFSIM_PADAT); | ||
| 52 | return((unsigned int) *pp); | ||
| 53 | } | ||
| 54 | |||
| 55 | static __inline__ void mcf_setppdata(unsigned int mask, unsigned int bits) | ||
| 56 | { | ||
| 57 | volatile unsigned short *pp; | ||
| 58 | pp = (volatile unsigned short *) (MCF_MBAR + MCFSIM_PADAT); | ||
| 59 | ppdata = (ppdata & ~mask) | bits; | ||
| 60 | *pp = ppdata; | ||
| 61 | } | ||
| 62 | #endif | ||
| 63 | |||
| 64 | /*---------------------------------------------------------------------------*/ | ||
| 65 | #elif defined(CONFIG_M5206e) | ||
| 66 | /* | ||
| 67 | * NETtel/5206e based hardware has leds on latch on CS3. | ||
| 68 | * No support modem for lines?? | ||
| 69 | */ | ||
| 70 | #define NETtel_LEDADDR 0x50000000 | ||
| 71 | |||
| 72 | /*---------------------------------------------------------------------------*/ | ||
| 73 | #elif defined(CONFIG_M5272) | ||
| 74 | /* | ||
| 75 | * NETtel/5272 based hardware. DTR/DCD lines are wired to GPB lines. | ||
| 76 | */ | ||
| 77 | #define MCFPP_DCD0 0x0080 | ||
| 78 | #define MCFPP_DCD1 0x0000 /* Port 1 no DCD support */ | ||
| 79 | #define MCFPP_DTR0 0x0040 | ||
| 80 | #define MCFPP_DTR1 0x0000 /* Port 1 no DTR support */ | ||
| 81 | |||
| 82 | #ifndef __ASSEMBLY__ | ||
| 83 | /* | ||
| 84 | * These functions defined to give quasi generic access to the | ||
| 85 | * PPIO bits used for DTR/DCD. | ||
| 86 | */ | ||
| 87 | static __inline__ unsigned int mcf_getppdata(void) | ||
| 88 | { | ||
| 89 | volatile unsigned short *pp; | ||
| 90 | pp = (volatile unsigned short *) (MCF_MBAR + MCFSIM_PBDAT); | ||
| 91 | return((unsigned int) *pp); | ||
| 92 | } | ||
| 93 | |||
| 94 | static __inline__ void mcf_setppdata(unsigned int mask, unsigned int bits) | ||
| 95 | { | ||
| 96 | volatile unsigned short *pp; | ||
| 97 | pp = (volatile unsigned short *) (MCF_MBAR + MCFSIM_PBDAT); | ||
| 98 | *pp = (*pp & ~mask) | bits; | ||
| 99 | } | ||
| 100 | #endif | ||
| 101 | |||
| 102 | #endif | ||
| 103 | /*---------------------------------------------------------------------------*/ | ||
| 104 | |||
| 105 | /****************************************************************************/ | ||
| 106 | #endif /* CONFIG_NETtel */ | ||
| 107 | /****************************************************************************/ | ||
| 108 | #endif /* nettel_h */ | ||
diff --git a/arch/m68knommu/include/asm/openprom.h b/arch/m68knommu/include/asm/openprom.h deleted file mode 100644 index fdba7953ff9f..000000000000 --- a/arch/m68knommu/include/asm/openprom.h +++ /dev/null | |||
| @@ -1 +0,0 @@ | |||
| 1 | #include <asm-m68k/openprom.h> | ||
diff --git a/arch/m68knommu/include/asm/oplib.h b/arch/m68knommu/include/asm/oplib.h deleted file mode 100644 index ce079dc332d9..000000000000 --- a/arch/m68knommu/include/asm/oplib.h +++ /dev/null | |||
| @@ -1 +0,0 @@ | |||
| 1 | #include <asm-m68k/oplib.h> | ||
diff --git a/arch/m68knommu/include/asm/page.h b/arch/m68knommu/include/asm/page.h deleted file mode 100644 index 3a1ede4544cb..000000000000 --- a/arch/m68knommu/include/asm/page.h +++ /dev/null | |||
| @@ -1,77 +0,0 @@ | |||
| 1 | #ifndef _M68KNOMMU_PAGE_H | ||
| 2 | #define _M68KNOMMU_PAGE_H | ||
| 3 | |||
| 4 | /* PAGE_SHIFT determines the page size */ | ||
| 5 | |||
| 6 | #define PAGE_SHIFT (12) | ||
| 7 | #define PAGE_SIZE (1UL << PAGE_SHIFT) | ||
| 8 | #define PAGE_MASK (~(PAGE_SIZE-1)) | ||
| 9 | |||
| 10 | #include <asm/setup.h> | ||
| 11 | |||
| 12 | #ifndef __ASSEMBLY__ | ||
| 13 | |||
| 14 | #define get_user_page(vaddr) __get_free_page(GFP_KERNEL) | ||
| 15 | #define free_user_page(page, addr) free_page(addr) | ||
| 16 | |||
| 17 | #define clear_page(page) memset((page), 0, PAGE_SIZE) | ||
| 18 | #define copy_page(to,from) memcpy((to), (from), PAGE_SIZE) | ||
| 19 | |||
| 20 | #define clear_user_page(page, vaddr, pg) clear_page(page) | ||
| 21 | #define copy_user_page(to, from, vaddr, pg) copy_page(to, from) | ||
| 22 | |||
| 23 | #define __alloc_zeroed_user_highpage(movableflags, vma, vaddr) \ | ||
| 24 | alloc_page_vma(GFP_HIGHUSER | __GFP_ZERO | movableflags, vma, vaddr) | ||
| 25 | #define __HAVE_ARCH_ALLOC_ZEROED_USER_HIGHPAGE | ||
| 26 | |||
| 27 | /* | ||
| 28 | * These are used to make use of C type-checking.. | ||
| 29 | */ | ||
| 30 | typedef struct { unsigned long pte; } pte_t; | ||
| 31 | typedef struct { unsigned long pmd[16]; } pmd_t; | ||
| 32 | typedef struct { unsigned long pgd; } pgd_t; | ||
| 33 | typedef struct { unsigned long pgprot; } pgprot_t; | ||
| 34 | typedef struct page *pgtable_t; | ||
| 35 | |||
| 36 | #define pte_val(x) ((x).pte) | ||
| 37 | #define pmd_val(x) ((&x)->pmd[0]) | ||
| 38 | #define pgd_val(x) ((x).pgd) | ||
| 39 | #define pgprot_val(x) ((x).pgprot) | ||
| 40 | |||
| 41 | #define __pte(x) ((pte_t) { (x) } ) | ||
| 42 | #define __pmd(x) ((pmd_t) { (x) } ) | ||
| 43 | #define __pgd(x) ((pgd_t) { (x) } ) | ||
| 44 | #define __pgprot(x) ((pgprot_t) { (x) } ) | ||
| 45 | |||
| 46 | extern unsigned long memory_start; | ||
| 47 | extern unsigned long memory_end; | ||
| 48 | |||
| 49 | #endif /* !__ASSEMBLY__ */ | ||
| 50 | |||
| 51 | #include <asm/page_offset.h> | ||
| 52 | |||
| 53 | #define PAGE_OFFSET (PAGE_OFFSET_RAW) | ||
| 54 | |||
| 55 | #ifndef __ASSEMBLY__ | ||
| 56 | |||
| 57 | #define __pa(vaddr) virt_to_phys((void *)(vaddr)) | ||
| 58 | #define __va(paddr) phys_to_virt((unsigned long)(paddr)) | ||
| 59 | |||
| 60 | #define virt_to_pfn(kaddr) (__pa(kaddr) >> PAGE_SHIFT) | ||
| 61 | #define pfn_to_virt(pfn) __va((pfn) << PAGE_SHIFT) | ||
| 62 | |||
| 63 | #define virt_to_page(addr) (mem_map + (((unsigned long)(addr)-PAGE_OFFSET) >> PAGE_SHIFT)) | ||
| 64 | #define page_to_virt(page) ((((page) - mem_map) << PAGE_SHIFT) + PAGE_OFFSET) | ||
| 65 | |||
| 66 | #define pfn_to_page(pfn) virt_to_page(pfn_to_virt(pfn)) | ||
| 67 | #define page_to_pfn(page) virt_to_pfn(page_to_virt(page)) | ||
| 68 | #define pfn_valid(pfn) ((pfn) < max_mapnr) | ||
| 69 | |||
| 70 | #define virt_addr_valid(kaddr) (((void *)(kaddr) >= (void *)PAGE_OFFSET) && \ | ||
| 71 | ((void *)(kaddr) < (void *)memory_end)) | ||
| 72 | |||
| 73 | #endif /* __ASSEMBLY__ */ | ||
| 74 | |||
| 75 | #include <asm-generic/page.h> | ||
| 76 | |||
| 77 | #endif /* _M68KNOMMU_PAGE_H */ | ||
diff --git a/arch/m68knommu/include/asm/page_offset.h b/arch/m68knommu/include/asm/page_offset.h deleted file mode 100644 index d4e73e0ba646..000000000000 --- a/arch/m68knommu/include/asm/page_offset.h +++ /dev/null | |||
| @@ -1,5 +0,0 @@ | |||
| 1 | |||
| 2 | |||
| 3 | /* This handles the memory map.. */ | ||
| 4 | #define PAGE_OFFSET_RAW CONFIG_RAMBASE | ||
| 5 | |||
diff --git a/arch/m68knommu/include/asm/param.h b/arch/m68knommu/include/asm/param.h deleted file mode 100644 index 6044397adb64..000000000000 --- a/arch/m68knommu/include/asm/param.h +++ /dev/null | |||
| @@ -1,22 +0,0 @@ | |||
| 1 | #ifndef _M68KNOMMU_PARAM_H | ||
| 2 | #define _M68KNOMMU_PARAM_H | ||
| 3 | |||
| 4 | #ifdef __KERNEL__ | ||
| 5 | #define HZ CONFIG_HZ | ||
| 6 | #define USER_HZ HZ | ||
| 7 | #define CLOCKS_PER_SEC (USER_HZ) | ||
| 8 | #endif | ||
| 9 | |||
| 10 | #ifndef HZ | ||
| 11 | #define HZ 100 | ||
| 12 | #endif | ||
| 13 | |||
| 14 | #define EXEC_PAGESIZE 4096 | ||
| 15 | |||
| 16 | #ifndef NOGROUP | ||
| 17 | #define NOGROUP (-1) | ||
| 18 | #endif | ||
| 19 | |||
| 20 | #define MAXHOSTNAMELEN 64 /* max length of hostname */ | ||
| 21 | |||
| 22 | #endif /* _M68KNOMMU_PARAM_H */ | ||
diff --git a/arch/m68knommu/include/asm/pci.h b/arch/m68knommu/include/asm/pci.h deleted file mode 100644 index a13f3cc87451..000000000000 --- a/arch/m68knommu/include/asm/pci.h +++ /dev/null | |||
| @@ -1,29 +0,0 @@ | |||
| 1 | #ifndef M68KNOMMU_PCI_H | ||
| 2 | #define M68KNOMMU_PCI_H | ||
| 3 | |||
| 4 | #include <asm-m68k/pci.h> | ||
| 5 | |||
| 6 | #ifdef CONFIG_COMEMPCI | ||
| 7 | /* | ||
| 8 | * These are pretty much arbitary with the CoMEM implementation. | ||
| 9 | * We have the whole address space to ourselves. | ||
| 10 | */ | ||
| 11 | #define PCIBIOS_MIN_IO 0x100 | ||
| 12 | #define PCIBIOS_MIN_MEM 0x00010000 | ||
| 13 | |||
| 14 | #define pcibios_scan_all_fns(a, b) 0 | ||
| 15 | |||
| 16 | /* | ||
| 17 | * Return whether the given PCI device DMA address mask can | ||
| 18 | * be supported properly. For example, if your device can | ||
| 19 | * only drive the low 24-bits during PCI bus mastering, then | ||
| 20 | * you would pass 0x00ffffff as the mask to this function. | ||
| 21 | */ | ||
| 22 | static inline int pci_dma_supported(struct pci_dev *hwdev, u64 mask) | ||
| 23 | { | ||
| 24 | return 1; | ||
| 25 | } | ||
| 26 | |||
| 27 | #endif /* CONFIG_COMEMPCI */ | ||
| 28 | |||
| 29 | #endif /* M68KNOMMU_PCI_H */ | ||
diff --git a/arch/m68knommu/include/asm/percpu.h b/arch/m68knommu/include/asm/percpu.h deleted file mode 100644 index 5de72c327efd..000000000000 --- a/arch/m68knommu/include/asm/percpu.h +++ /dev/null | |||
| @@ -1,6 +0,0 @@ | |||
| 1 | #ifndef __ARCH_M68KNOMMU_PERCPU__ | ||
| 2 | #define __ARCH_M68KNOMMU_PERCPU__ | ||
| 3 | |||
| 4 | #include <asm-generic/percpu.h> | ||
| 5 | |||
| 6 | #endif /* __ARCH_M68KNOMMU_PERCPU__ */ | ||
diff --git a/arch/m68knommu/include/asm/pgalloc.h b/arch/m68knommu/include/asm/pgalloc.h deleted file mode 100644 index d6352f671ec0..000000000000 --- a/arch/m68knommu/include/asm/pgalloc.h +++ /dev/null | |||
| @@ -1,8 +0,0 @@ | |||
| 1 | #ifndef _M68KNOMMU_PGALLOC_H | ||
| 2 | #define _M68KNOMMU_PGALLOC_H | ||
| 3 | |||
| 4 | #include <asm/setup.h> | ||
| 5 | |||
| 6 | #define check_pgt_cache() do { } while (0) | ||
| 7 | |||
| 8 | #endif /* _M68KNOMMU_PGALLOC_H */ | ||
diff --git a/arch/m68knommu/include/asm/pgtable.h b/arch/m68knommu/include/asm/pgtable.h deleted file mode 100644 index 46251016e821..000000000000 --- a/arch/m68knommu/include/asm/pgtable.h +++ /dev/null | |||
| @@ -1,70 +0,0 @@ | |||
| 1 | #ifndef _M68KNOMMU_PGTABLE_H | ||
| 2 | #define _M68KNOMMU_PGTABLE_H | ||
| 3 | |||
| 4 | #include <asm-generic/4level-fixup.h> | ||
| 5 | |||
| 6 | /* | ||
| 7 | * (C) Copyright 2000-2002, Greg Ungerer <gerg@snapgear.com> | ||
| 8 | */ | ||
| 9 | |||
| 10 | #include <linux/slab.h> | ||
| 11 | #include <asm/processor.h> | ||
| 12 | #include <asm/page.h> | ||
| 13 | #include <asm/io.h> | ||
| 14 | |||
| 15 | /* | ||
| 16 | * Trivial page table functions. | ||
| 17 | */ | ||
| 18 | #define pgd_present(pgd) (1) | ||
| 19 | #define pgd_none(pgd) (0) | ||
| 20 | #define pgd_bad(pgd) (0) | ||
| 21 | #define pgd_clear(pgdp) | ||
| 22 | #define kern_addr_valid(addr) (1) | ||
| 23 | #define pmd_offset(a, b) ((void *)0) | ||
| 24 | |||
| 25 | #define PAGE_NONE __pgprot(0) | ||
| 26 | #define PAGE_SHARED __pgprot(0) | ||
| 27 | #define PAGE_COPY __pgprot(0) | ||
| 28 | #define PAGE_READONLY __pgprot(0) | ||
| 29 | #define PAGE_KERNEL __pgprot(0) | ||
| 30 | |||
| 31 | extern void paging_init(void); | ||
| 32 | #define swapper_pg_dir ((pgd_t *) 0) | ||
| 33 | |||
| 34 | #define __swp_type(x) (0) | ||
| 35 | #define __swp_offset(x) (0) | ||
| 36 | #define __swp_entry(typ,off) ((swp_entry_t) { ((typ) | ((off) << 7)) }) | ||
| 37 | #define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) }) | ||
| 38 | #define __swp_entry_to_pte(x) ((pte_t) { (x).val }) | ||
| 39 | |||
| 40 | static inline int pte_file(pte_t pte) { return 0; } | ||
| 41 | |||
| 42 | /* | ||
| 43 | * ZERO_PAGE is a global shared page that is always zero: used | ||
| 44 | * for zero-mapped memory areas etc.. | ||
| 45 | */ | ||
| 46 | #define ZERO_PAGE(vaddr) (virt_to_page(0)) | ||
| 47 | |||
| 48 | /* | ||
| 49 | * These would be in other places but having them here reduces the diffs. | ||
| 50 | */ | ||
| 51 | extern unsigned int kobjsize(const void *objp); | ||
| 52 | |||
| 53 | /* | ||
| 54 | * No page table caches to initialise. | ||
| 55 | */ | ||
| 56 | #define pgtable_cache_init() do { } while (0) | ||
| 57 | |||
| 58 | #define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \ | ||
| 59 | remap_pfn_range(vma, vaddr, pfn, size, prot) | ||
| 60 | |||
| 61 | /* | ||
| 62 | * All 32bit addresses are effectively valid for vmalloc... | ||
| 63 | * Sort of meaningless for non-VM targets. | ||
| 64 | */ | ||
| 65 | #define VMALLOC_START 0 | ||
| 66 | #define VMALLOC_END 0xffffffff | ||
| 67 | |||
| 68 | #include <asm-generic/pgtable.h> | ||
| 69 | |||
| 70 | #endif /* _M68KNOMMU_PGTABLE_H */ | ||
diff --git a/arch/m68knommu/include/asm/poll.h b/arch/m68knommu/include/asm/poll.h deleted file mode 100644 index ee1b6cb549ca..000000000000 --- a/arch/m68knommu/include/asm/poll.h +++ /dev/null | |||
| @@ -1 +0,0 @@ | |||
| 1 | #include <asm-m68k/poll.h> | ||
diff --git a/arch/m68knommu/include/asm/posix_types.h b/arch/m68knommu/include/asm/posix_types.h deleted file mode 100644 index 6205fb9392a3..000000000000 --- a/arch/m68knommu/include/asm/posix_types.h +++ /dev/null | |||
| @@ -1 +0,0 @@ | |||
| 1 | #include <asm-m68k/posix_types.h> | ||
diff --git a/arch/m68knommu/include/asm/processor.h b/arch/m68knommu/include/asm/processor.h deleted file mode 100644 index 91cba18acdd3..000000000000 --- a/arch/m68knommu/include/asm/processor.h +++ /dev/null | |||
| @@ -1,143 +0,0 @@ | |||
| 1 | /* | ||
| 2 | * include/asm-m68knommu/processor.h | ||
| 3 | * | ||
| 4 | * Copyright (C) 1995 Hamish Macdonald | ||
| 5 | */ | ||
| 6 | |||
| 7 | #ifndef __ASM_M68K_PROCESSOR_H | ||
| 8 | #define __ASM_M68K_PROCESSOR_H | ||
| 9 | |||
| 10 | /* | ||
| 11 | * Default implementation of macro that returns current | ||
| 12 | * instruction pointer ("program counter"). | ||
| 13 | */ | ||
| 14 | #define current_text_addr() ({ __label__ _l; _l: &&_l;}) | ||
| 15 | |||
| 16 | #include <linux/compiler.h> | ||
| 17 | #include <linux/threads.h> | ||
| 18 | #include <asm/types.h> | ||
| 19 | #include <asm/segment.h> | ||
| 20 | #include <asm/fpu.h> | ||
| 21 | #include <asm/ptrace.h> | ||
| 22 | #include <asm/current.h> | ||
| 23 | |||
| 24 | static inline unsigned long rdusp(void) | ||
| 25 | { | ||
| 26 | #ifdef CONFIG_COLDFIRE | ||
| 27 | extern unsigned int sw_usp; | ||
| 28 | return(sw_usp); | ||
| 29 | #else | ||
| 30 | unsigned long usp; | ||
| 31 | __asm__ __volatile__("move %/usp,%0" : "=a" (usp)); | ||
| 32 | return usp; | ||
| 33 | #endif | ||
| 34 | } | ||
| 35 | |||
| 36 | static inline void wrusp(unsigned long usp) | ||
| 37 | { | ||
| 38 | #ifdef CONFIG_COLDFIRE | ||
| 39 | extern unsigned int sw_usp; | ||
| 40 | sw_usp = usp; | ||
| 41 | #else | ||
| 42 | __asm__ __volatile__("move %0,%/usp" : : "a" (usp)); | ||
| 43 | #endif | ||
| 44 | } | ||
| 45 | |||
| 46 | /* | ||
| 47 | * User space process size: 3.75GB. This is hardcoded into a few places, | ||
| 48 | * so don't change it unless you know what you are doing. | ||
| 49 | */ | ||
| 50 | #define TASK_SIZE (0xF0000000UL) | ||
| 51 | |||
| 52 | /* | ||
| 53 | * This decides where the kernel will search for a free chunk of vm | ||
| 54 | * space during mmap's. We won't be using it | ||
| 55 | */ | ||
| 56 | #define TASK_UNMAPPED_BASE 0 | ||
| 57 | |||
| 58 | /* | ||
| 59 | * if you change this structure, you must change the code and offsets | ||
| 60 | * in m68k/machasm.S | ||
| 61 | */ | ||
| 62 | |||
| 63 | struct thread_struct { | ||
| 64 | unsigned long ksp; /* kernel stack pointer */ | ||
| 65 | unsigned long usp; /* user stack pointer */ | ||
| 66 | unsigned short sr; /* saved status register */ | ||
| 67 | unsigned short fs; /* saved fs (sfc, dfc) */ | ||
| 68 | unsigned long crp[2]; /* cpu root pointer */ | ||
| 69 | unsigned long esp0; /* points to SR of stack frame */ | ||
| 70 | unsigned long fp[8*3]; | ||
| 71 | unsigned long fpcntl[3]; /* fp control regs */ | ||
| 72 | unsigned char fpstate[FPSTATESIZE]; /* floating point state */ | ||
| 73 | }; | ||
| 74 | |||
| 75 | #define INIT_THREAD { \ | ||
| 76 | sizeof(init_stack) + (unsigned long) init_stack, 0, \ | ||
| 77 | PS_S, __KERNEL_DS, \ | ||
| 78 | {0, 0}, 0, {0,}, {0, 0, 0}, {0,}, \ | ||
| 79 | } | ||
| 80 | |||
| 81 | /* | ||
| 82 | * Coldfire stacks need to be re-aligned on trap exit, conventional | ||
| 83 | * 68k can handle this case cleanly. | ||
| 84 | */ | ||
| 85 | #if defined(CONFIG_COLDFIRE) | ||
| 86 | #define reformat(_regs) do { (_regs)->format = 0x4; } while(0) | ||
| 87 | #else | ||
| 88 | #define reformat(_regs) do { } while (0) | ||
| 89 | #endif | ||
| 90 | |||
| 91 | /* | ||
| 92 | * Do necessary setup to start up a newly executed thread. | ||
| 93 | * | ||
| 94 | * pass the data segment into user programs if it exists, | ||
| 95 | * it can't hurt anything as far as I can tell | ||
| 96 | */ | ||
| 97 | #define start_thread(_regs, _pc, _usp) \ | ||
| 98 | do { \ | ||
| 99 | set_fs(USER_DS); /* reads from user space */ \ | ||
| 100 | (_regs)->pc = (_pc); \ | ||
| 101 | ((struct switch_stack *)(_regs))[-1].a6 = 0; \ | ||
| 102 | reformat(_regs); \ | ||
| 103 | if (current->mm) \ | ||
| 104 | (_regs)->d5 = current->mm->start_data; \ | ||
| 105 | (_regs)->sr &= ~0x2000; \ | ||
| 106 | wrusp(_usp); \ | ||
| 107 | } while(0) | ||
| 108 | |||
| 109 | /* Forward declaration, a strange C thing */ | ||
| 110 | struct task_struct; | ||
| 111 | |||
| 112 | /* Free all resources held by a thread. */ | ||
| 113 | static inline void release_thread(struct task_struct *dead_task) | ||
| 114 | { | ||
| 115 | } | ||
| 116 | |||
| 117 | /* Prepare to copy thread state - unlazy all lazy status */ | ||
| 118 | #define prepare_to_copy(tsk) do { } while (0) | ||
| 119 | |||
| 120 | extern int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags); | ||
| 121 | |||
| 122 | /* | ||
| 123 | * Free current thread data structures etc.. | ||
| 124 | */ | ||
| 125 | static inline void exit_thread(void) | ||
| 126 | { | ||
| 127 | } | ||
| 128 | |||
| 129 | unsigned long thread_saved_pc(struct task_struct *tsk); | ||
| 130 | unsigned long get_wchan(struct task_struct *p); | ||
| 131 | |||
| 132 | #define KSTK_EIP(tsk) \ | ||
| 133 | ({ \ | ||
| 134 | unsigned long eip = 0; \ | ||
| 135 | if ((tsk)->thread.esp0 > PAGE_SIZE && \ | ||
| 136 | (virt_addr_valid((tsk)->thread.esp0))) \ | ||
| 137 | eip = ((struct pt_regs *) (tsk)->thread.esp0)->pc; \ | ||
| 138 | eip; }) | ||
| 139 | #define KSTK_ESP(tsk) ((tsk) == current ? rdusp() : (tsk)->thread.usp) | ||
| 140 | |||
| 141 | #define cpu_relax() barrier() | ||
| 142 | |||
| 143 | #endif | ||
diff --git a/arch/m68knommu/include/asm/ptrace.h b/arch/m68knommu/include/asm/ptrace.h deleted file mode 100644 index 8c9194b98548..000000000000 --- a/arch/m68knommu/include/asm/ptrace.h +++ /dev/null | |||
| @@ -1,87 +0,0 @@ | |||
| 1 | #ifndef _M68K_PTRACE_H | ||
| 2 | #define _M68K_PTRACE_H | ||
| 3 | |||
| 4 | #define PT_D1 0 | ||
| 5 | #define PT_D2 1 | ||
| 6 | #define PT_D3 2 | ||
| 7 | #define PT_D4 3 | ||
| 8 | #define PT_D5 4 | ||
| 9 | #define PT_D6 5 | ||
| 10 | #define PT_D7 6 | ||
| 11 | #define PT_A0 7 | ||
| 12 | #define PT_A1 8 | ||
| 13 | #define PT_A2 9 | ||
| 14 | #define PT_A3 10 | ||
| 15 | #define PT_A4 11 | ||
| 16 | #define PT_A5 12 | ||
| 17 | #define PT_A6 13 | ||
| 18 | #define PT_D0 14 | ||
| 19 | #define PT_USP 15 | ||
| 20 | #define PT_ORIG_D0 16 | ||
| 21 | #define PT_SR 17 | ||
| 22 | #define PT_PC 18 | ||
| 23 | |||
| 24 | #ifndef __ASSEMBLY__ | ||
| 25 | |||
| 26 | /* this struct defines the way the registers are stored on the | ||
| 27 | stack during a system call. */ | ||
| 28 | |||
| 29 | struct pt_regs { | ||
| 30 | long d1; | ||
| 31 | long d2; | ||
| 32 | long d3; | ||
| 33 | long d4; | ||
| 34 | long d5; | ||
| 35 | long a0; | ||
| 36 | long a1; | ||
| 37 | long a2; | ||
| 38 | long d0; | ||
| 39 | long orig_d0; | ||
| 40 | long stkadj; | ||
| 41 | #ifdef CONFIG_COLDFIRE | ||
| 42 | unsigned format : 4; /* frame format specifier */ | ||
| 43 | unsigned vector : 12; /* vector offset */ | ||
| 44 | unsigned short sr; | ||
| 45 | unsigned long pc; | ||
| 46 | #else | ||
| 47 | unsigned short sr; | ||
| 48 | unsigned long pc; | ||
| 49 | unsigned format : 4; /* frame format specifier */ | ||
| 50 | unsigned vector : 12; /* vector offset */ | ||
| 51 | #endif | ||
| 52 | }; | ||
| 53 | |||
| 54 | /* | ||
| 55 | * This is the extended stack used by signal handlers and the context | ||
| 56 | * switcher: it's pushed after the normal "struct pt_regs". | ||
| 57 | */ | ||
| 58 | struct switch_stack { | ||
| 59 | unsigned long d6; | ||
| 60 | unsigned long d7; | ||
| 61 | unsigned long a3; | ||
| 62 | unsigned long a4; | ||
| 63 | unsigned long a5; | ||
| 64 | unsigned long a6; | ||
| 65 | unsigned long retpc; | ||
| 66 | }; | ||
| 67 | |||
| 68 | /* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */ | ||
| 69 | #define PTRACE_GETREGS 12 | ||
| 70 | #define PTRACE_SETREGS 13 | ||
| 71 | #define PTRACE_GETFPREGS 14 | ||
| 72 | #define PTRACE_SETFPREGS 15 | ||
| 73 | |||
| 74 | #ifdef __KERNEL__ | ||
| 75 | |||
| 76 | #ifndef PS_S | ||
| 77 | #define PS_S (0x2000) | ||
| 78 | #define PS_M (0x1000) | ||
| 79 | #endif | ||
| 80 | |||
| 81 | #define user_mode(regs) (!((regs)->sr & PS_S)) | ||
| 82 | #define instruction_pointer(regs) ((regs)->pc) | ||
| 83 | #define profile_pc(regs) instruction_pointer(regs) | ||
| 84 | extern void show_regs(struct pt_regs *); | ||
| 85 | #endif /* __KERNEL__ */ | ||
| 86 | #endif /* __ASSEMBLY__ */ | ||
| 87 | #endif /* _M68K_PTRACE_H */ | ||
diff --git a/arch/m68knommu/include/asm/quicc_simple.h b/arch/m68knommu/include/asm/quicc_simple.h deleted file mode 100644 index c3636932d4bc..000000000000 --- a/arch/m68knommu/include/asm/quicc_simple.h +++ /dev/null | |||
| @@ -1,52 +0,0 @@ | |||
| 1 | /*********************************** | ||
| 2 | * $Id: quicc_simple.h,v 1.1 2002/03/02 15:01:10 gerg Exp $ | ||
| 3 | *********************************** | ||
| 4 | * | ||
| 5 | *************************************** | ||
| 6 | * Simple drivers common header | ||
| 7 | *************************************** | ||
| 8 | */ | ||
| 9 | |||
| 10 | #ifndef __SIMPLE_H | ||
| 11 | #define __SIMPLE_H | ||
| 12 | |||
| 13 | /* #include "quicc.h" */ | ||
| 14 | |||
| 15 | #define GLB_SCC_0 0 | ||
| 16 | #define GLB_SCC_1 1 | ||
| 17 | #define GLB_SCC_2 2 | ||
| 18 | #define GLB_SCC_3 3 | ||
| 19 | |||
| 20 | typedef void (int_routine)(unsigned short interrupt_event); | ||
| 21 | typedef int_routine *int_routine_ptr; | ||
| 22 | typedef void *(alloc_routine)(int length); | ||
| 23 | typedef void (free_routine)(int scc_num, int channel_num, void *buf); | ||
| 24 | typedef void (store_rx_buffer_routine)(int scc_num, int channel_num, void *buff, int length); | ||
| 25 | typedef int (handle_tx_error_routine)(int scc_num, int channel_num, QUICC_BD *tbd); | ||
| 26 | typedef void (handle_rx_error_routine)(int scc_num, int channel_num, QUICC_BD *rbd); | ||
| 27 | typedef void (handle_lost_error_routine)(int scc_num, int channel_num); | ||
| 28 | |||
| 29 | /* user defined functions for global errors */ | ||
| 30 | typedef void (handle_glob_overrun_routine)(int scc_number); | ||
| 31 | typedef void (handle_glob_underrun_routine)(int scc_number); | ||
| 32 | typedef void (glob_intr_q_overflow_routine)(int scc_number); | ||
| 33 | |||
| 34 | /* | ||
| 35 | * General initialization and command routines | ||
| 36 | */ | ||
| 37 | void quicc_issue_cmd (unsigned short cmd, int scc_num); | ||
| 38 | void quicc_init(void); | ||
| 39 | void quicc_scc_init(int scc_number, int number_of_rx_buf, int number_of_tx_buf); | ||
| 40 | void quicc_smc_init(int smc_number, int number_of_rx_buf, int number_of_tx_buf); | ||
| 41 | void quicc_scc_start(int scc_num); | ||
| 42 | void quicc_scc_loopback(int scc_num); | ||
| 43 | |||
| 44 | /* Interrupt enable/disable routines for critical pieces of code*/ | ||
| 45 | unsigned short IntrDis(void); | ||
| 46 | void IntrEna(unsigned short old_sr); | ||
| 47 | |||
| 48 | /* For debugging */ | ||
| 49 | void print_rbd(int scc_num); | ||
| 50 | void print_tbd(int scc_num); | ||
| 51 | |||
| 52 | #endif | ||
diff --git a/arch/m68knommu/include/asm/resource.h b/arch/m68knommu/include/asm/resource.h deleted file mode 100644 index 7fa63d5ea576..000000000000 --- a/arch/m68knommu/include/asm/resource.h +++ /dev/null | |||
| @@ -1 +0,0 @@ | |||
| 1 | #include <asm-m68k/resource.h> | ||
diff --git a/arch/m68knommu/include/asm/rtc.h b/arch/m68knommu/include/asm/rtc.h deleted file mode 100644 index eaf18ec83c8e..000000000000 --- a/arch/m68knommu/include/asm/rtc.h +++ /dev/null | |||
| @@ -1 +0,0 @@ | |||
| 1 | #include <asm-m68k/rtc.h> | ||
diff --git a/arch/m68knommu/include/asm/scatterlist.h b/arch/m68knommu/include/asm/scatterlist.h deleted file mode 100644 index afc4788b0d2c..000000000000 --- a/arch/m68knommu/include/asm/scatterlist.h +++ /dev/null | |||
| @@ -1,22 +0,0 @@ | |||
| 1 | #ifndef _M68KNOMMU_SCATTERLIST_H | ||
| 2 | #define _M68KNOMMU_SCATTERLIST_H | ||
| 3 | |||
| 4 | #include <linux/mm.h> | ||
| 5 | #include <asm/types.h> | ||
| 6 | |||
| 7 | struct scatterlist { | ||
| 8 | #ifdef CONFIG_DEBUG_SG | ||
| 9 | unsigned long sg_magic; | ||
| 10 | #endif | ||
| 11 | unsigned long page_link; | ||
| 12 | unsigned int offset; | ||
| 13 | dma_addr_t dma_address; | ||
| 14 | unsigned int length; | ||
| 15 | }; | ||
| 16 | |||
| 17 | #define sg_dma_address(sg) ((sg)->dma_address) | ||
| 18 | #define sg_dma_len(sg) ((sg)->length) | ||
| 19 | |||
| 20 | #define ISA_DMA_THRESHOLD (0xffffffff) | ||
| 21 | |||
| 22 | #endif /* !(_M68KNOMMU_SCATTERLIST_H) */ | ||
diff --git a/arch/m68knommu/include/asm/sections.h b/arch/m68knommu/include/asm/sections.h deleted file mode 100644 index dd0ecb98ec08..000000000000 --- a/arch/m68knommu/include/asm/sections.h +++ /dev/null | |||
| @@ -1,7 +0,0 @@ | |||
| 1 | #ifndef _M68KNOMMU_SECTIONS_H | ||
| 2 | #define _M68KNOMMU_SECTIONS_H | ||
| 3 | |||
| 4 | /* nothing to see, move along */ | ||
| 5 | #include <asm-generic/sections.h> | ||
| 6 | |||
| 7 | #endif | ||
diff --git a/arch/m68knommu/include/asm/segment.h b/arch/m68knommu/include/asm/segment.h deleted file mode 100644 index 42318ebec7ec..000000000000 --- a/arch/m68knommu/include/asm/segment.h +++ /dev/null | |||
| @@ -1,51 +0,0 @@ | |||
| 1 | #ifndef _M68K_SEGMENT_H | ||
| 2 | #define _M68K_SEGMENT_H | ||
| 3 | |||
| 4 | /* define constants */ | ||
| 5 | /* Address spaces (FC0-FC2) */ | ||
| 6 | #define USER_DATA (1) | ||
| 7 | #ifndef __USER_DS | ||
| 8 | #define __USER_DS (USER_DATA) | ||
| 9 | #endif | ||
| 10 | #define USER_PROGRAM (2) | ||
| 11 | #define SUPER_DATA (5) | ||
| 12 | #ifndef __KERNEL_DS | ||
| 13 | #define __KERNEL_DS (SUPER_DATA) | ||
| 14 | #endif | ||
| 15 | #define SUPER_PROGRAM (6) | ||
| 16 | #define CPU_SPACE (7) | ||
| 17 | |||
| 18 | #ifndef __ASSEMBLY__ | ||
| 19 | |||
| 20 | typedef struct { | ||
| 21 | unsigned long seg; | ||
| 22 | } mm_segment_t; | ||
| 23 | |||
| 24 | #define MAKE_MM_SEG(s) ((mm_segment_t) { (s) }) | ||
| 25 | #define USER_DS MAKE_MM_SEG(__USER_DS) | ||
| 26 | #define KERNEL_DS MAKE_MM_SEG(__KERNEL_DS) | ||
| 27 | |||
| 28 | /* | ||
| 29 | * Get/set the SFC/DFC registers for MOVES instructions | ||
| 30 | */ | ||
| 31 | |||
| 32 | static inline mm_segment_t get_fs(void) | ||
| 33 | { | ||
| 34 | return USER_DS; | ||
| 35 | } | ||
| 36 | |||
| 37 | static inline mm_segment_t get_ds(void) | ||
| 38 | { | ||
| 39 | /* return the supervisor data space code */ | ||
| 40 | return KERNEL_DS; | ||
| 41 | } | ||
| 42 | |||
| 43 | static inline void set_fs(mm_segment_t val) | ||
| 44 | { | ||
| 45 | } | ||
| 46 | |||
| 47 | #define segment_eq(a,b) ((a).seg == (b).seg) | ||
| 48 | |||
| 49 | #endif /* __ASSEMBLY__ */ | ||
| 50 | |||
| 51 | #endif /* _M68K_SEGMENT_H */ | ||
diff --git a/arch/m68knommu/include/asm/sembuf.h b/arch/m68knommu/include/asm/sembuf.h deleted file mode 100644 index 3a634f9ecf50..000000000000 --- a/arch/m68knommu/include/asm/sembuf.h +++ /dev/null | |||
| @@ -1 +0,0 @@ | |||
| 1 | #include <asm-m68k/sembuf.h> | ||
diff --git a/arch/m68knommu/include/asm/setup.h b/arch/m68knommu/include/asm/setup.h deleted file mode 100644 index fb86bb2a6078..000000000000 --- a/arch/m68knommu/include/asm/setup.h +++ /dev/null | |||
| @@ -1,10 +0,0 @@ | |||
| 1 | #ifdef __KERNEL__ | ||
| 2 | |||
| 3 | #include <asm-m68k/setup.h> | ||
| 4 | |||
| 5 | /* We have a bigger command line buffer. */ | ||
| 6 | #undef COMMAND_LINE_SIZE | ||
| 7 | |||
| 8 | #endif /* __KERNEL__ */ | ||
| 9 | |||
| 10 | #define COMMAND_LINE_SIZE 512 | ||
diff --git a/arch/m68knommu/include/asm/shm.h b/arch/m68knommu/include/asm/shm.h deleted file mode 100644 index cc8e522d9050..000000000000 --- a/arch/m68knommu/include/asm/shm.h +++ /dev/null | |||
| @@ -1 +0,0 @@ | |||
| 1 | #include <asm-m68k/shm.h> | ||
diff --git a/arch/m68knommu/include/asm/shmbuf.h b/arch/m68knommu/include/asm/shmbuf.h deleted file mode 100644 index bc34cf8eefce..000000000000 --- a/arch/m68knommu/include/asm/shmbuf.h +++ /dev/null | |||
| @@ -1 +0,0 @@ | |||
| 1 | #include <asm-m68k/shmbuf.h> | ||
diff --git a/arch/m68knommu/include/asm/shmparam.h b/arch/m68knommu/include/asm/shmparam.h deleted file mode 100644 index d7ee69648ebf..000000000000 --- a/arch/m68knommu/include/asm/shmparam.h +++ /dev/null | |||
| @@ -1 +0,0 @@ | |||
| 1 | #include <asm-m68k/shmparam.h> | ||
diff --git a/arch/m68knommu/include/asm/sigcontext.h b/arch/m68knommu/include/asm/sigcontext.h deleted file mode 100644 index 36c293fc133d..000000000000 --- a/arch/m68knommu/include/asm/sigcontext.h +++ /dev/null | |||
| @@ -1,17 +0,0 @@ | |||
| 1 | #ifndef _ASM_M68KNOMMU_SIGCONTEXT_H | ||
| 2 | #define _ASM_M68KNOMMU_SIGCONTEXT_H | ||
| 3 | |||
| 4 | struct sigcontext { | ||
| 5 | unsigned long sc_mask; /* old sigmask */ | ||
| 6 | unsigned long sc_usp; /* old user stack pointer */ | ||
| 7 | unsigned long sc_d0; | ||
| 8 | unsigned long sc_d1; | ||
| 9 | unsigned long sc_a0; | ||
| 10 | unsigned long sc_a1; | ||
| 11 | unsigned long sc_a5; | ||
| 12 | unsigned short sc_sr; | ||
| 13 | unsigned long sc_pc; | ||
| 14 | unsigned short sc_formatvec; | ||
| 15 | }; | ||
| 16 | |||
| 17 | #endif | ||
diff --git a/arch/m68knommu/include/asm/siginfo.h b/arch/m68knommu/include/asm/siginfo.h deleted file mode 100644 index b18e5f4064ae..000000000000 --- a/arch/m68knommu/include/asm/siginfo.h +++ /dev/null | |||
| @@ -1,6 +0,0 @@ | |||
| 1 | #ifndef _M68KNOMMU_SIGINFO_H | ||
| 2 | #define _M68KNOMMU_SIGINFO_H | ||
| 3 | |||
| 4 | #include <asm-generic/siginfo.h> | ||
| 5 | |||
| 6 | #endif | ||
diff --git a/arch/m68knommu/include/asm/signal.h b/arch/m68knommu/include/asm/signal.h deleted file mode 100644 index 216c08be54a0..000000000000 --- a/arch/m68knommu/include/asm/signal.h +++ /dev/null | |||
| @@ -1,159 +0,0 @@ | |||
| 1 | #ifndef _M68KNOMMU_SIGNAL_H | ||
| 2 | #define _M68KNOMMU_SIGNAL_H | ||
| 3 | |||
| 4 | #include <linux/types.h> | ||
| 5 | |||
| 6 | /* Avoid too many header ordering problems. */ | ||
| 7 | struct siginfo; | ||
| 8 | |||
| 9 | #ifdef __KERNEL__ | ||
| 10 | /* Most things should be clean enough to redefine this at will, if care | ||
| 11 | is taken to make libc match. */ | ||
| 12 | |||
| 13 | #define _NSIG 64 | ||
| 14 | #define _NSIG_BPW 32 | ||
| 15 | #define _NSIG_WORDS (_NSIG / _NSIG_BPW) | ||
| 16 | |||
| 17 | typedef unsigned long old_sigset_t; /* at least 32 bits */ | ||
| 18 | |||
| 19 | typedef struct { | ||
| 20 | unsigned long sig[_NSIG_WORDS]; | ||
| 21 | } sigset_t; | ||
| 22 | |||
| 23 | #else | ||
| 24 | /* Here we must cater to libcs that poke about in kernel headers. */ | ||
| 25 | |||
| 26 | #define NSIG 32 | ||
| 27 | typedef unsigned long sigset_t; | ||
| 28 | |||
| 29 | #endif /* __KERNEL__ */ | ||
| 30 | |||
| 31 | #define SIGHUP 1 | ||
| 32 | #define SIGINT 2 | ||
| 33 | #define SIGQUIT 3 | ||
| 34 | #define SIGILL 4 | ||
| 35 | #define SIGTRAP 5 | ||
| 36 | #define SIGABRT 6 | ||
| 37 | #define SIGIOT 6 | ||
| 38 | #define SIGBUS 7 | ||
| 39 | #define SIGFPE 8 | ||
| 40 | #define SIGKILL 9 | ||
| 41 | #define SIGUSR1 10 | ||
| 42 | #define SIGSEGV 11 | ||
| 43 | #define SIGUSR2 12 | ||
| 44 | #define SIGPIPE 13 | ||
| 45 | #define SIGALRM 14 | ||
| 46 | #define SIGTERM 15 | ||
| 47 | #define SIGSTKFLT 16 | ||
| 48 | #define SIGCHLD 17 | ||
| 49 | #define SIGCONT 18 | ||
| 50 | #define SIGSTOP 19 | ||
| 51 | #define SIGTSTP 20 | ||
| 52 | #define SIGTTIN 21 | ||
| 53 | #define SIGTTOU 22 | ||
| 54 | #define SIGURG 23 | ||
| 55 | #define SIGXCPU 24 | ||
| 56 | #define SIGXFSZ 25 | ||
| 57 | #define SIGVTALRM 26 | ||
| 58 | #define SIGPROF 27 | ||
| 59 | #define SIGWINCH 28 | ||
| 60 | #define SIGIO 29 | ||
| 61 | #define SIGPOLL SIGIO | ||
| 62 | /* | ||
| 63 | #define SIGLOST 29 | ||
| 64 | */ | ||
| 65 | #define SIGPWR 30 | ||
| 66 | #define SIGSYS 31 | ||
| 67 | #define SIGUNUSED 31 | ||
| 68 | |||
| 69 | /* These should not be considered constants from userland. */ | ||
| 70 | #define SIGRTMIN 32 | ||
| 71 | #define SIGRTMAX _NSIG | ||
| 72 | |||
| 73 | /* | ||
| 74 | * SA_FLAGS values: | ||
| 75 | * | ||
| 76 | * SA_ONSTACK indicates that a registered stack_t will be used. | ||
| 77 | * SA_RESTART flag to get restarting signals (which were the default long ago) | ||
| 78 | * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop. | ||
| 79 | * SA_RESETHAND clears the handler when the signal is delivered. | ||
| 80 | * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies. | ||
| 81 | * SA_NODEFER prevents the current signal from being masked in the handler. | ||
| 82 | * | ||
| 83 | * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single | ||
| 84 | * Unix names RESETHAND and NODEFER respectively. | ||
| 85 | */ | ||
| 86 | #define SA_NOCLDSTOP 0x00000001 | ||
| 87 | #define SA_NOCLDWAIT 0x00000002 | ||
| 88 | #define SA_SIGINFO 0x00000004 | ||
| 89 | #define SA_ONSTACK 0x08000000 | ||
| 90 | #define SA_RESTART 0x10000000 | ||
| 91 | #define SA_NODEFER 0x40000000 | ||
| 92 | #define SA_RESETHAND 0x80000000 | ||
| 93 | |||
| 94 | #define SA_NOMASK SA_NODEFER | ||
| 95 | #define SA_ONESHOT SA_RESETHAND | ||
| 96 | |||
| 97 | /* | ||
| 98 | * sigaltstack controls | ||
| 99 | */ | ||
| 100 | #define SS_ONSTACK 1 | ||
| 101 | #define SS_DISABLE 2 | ||
| 102 | |||
| 103 | #define MINSIGSTKSZ 2048 | ||
| 104 | #define SIGSTKSZ 8192 | ||
| 105 | |||
| 106 | #include <asm-generic/signal.h> | ||
| 107 | |||
| 108 | #ifdef __KERNEL__ | ||
| 109 | struct old_sigaction { | ||
| 110 | __sighandler_t sa_handler; | ||
| 111 | old_sigset_t sa_mask; | ||
| 112 | unsigned long sa_flags; | ||
| 113 | void (*sa_restorer)(void); | ||
| 114 | }; | ||
| 115 | |||
| 116 | struct sigaction { | ||
| 117 | __sighandler_t sa_handler; | ||
| 118 | unsigned long sa_flags; | ||
| 119 | void (*sa_restorer)(void); | ||
| 120 | sigset_t sa_mask; /* mask last for extensibility */ | ||
| 121 | }; | ||
| 122 | |||
| 123 | struct k_sigaction { | ||
| 124 | struct sigaction sa; | ||
| 125 | }; | ||
| 126 | #else | ||
| 127 | /* Here we must cater to libcs that poke about in kernel headers. */ | ||
| 128 | |||
| 129 | struct sigaction { | ||
| 130 | union { | ||
| 131 | __sighandler_t _sa_handler; | ||
| 132 | void (*_sa_sigaction)(int, struct siginfo *, void *); | ||
| 133 | } _u; | ||
| 134 | sigset_t sa_mask; | ||
| 135 | unsigned long sa_flags; | ||
| 136 | void (*sa_restorer)(void); | ||
| 137 | }; | ||
| 138 | |||
| 139 | #define sa_handler _u._sa_handler | ||
| 140 | #define sa_sigaction _u._sa_sigaction | ||
| 141 | |||
| 142 | #endif /* __KERNEL__ */ | ||
| 143 | |||
| 144 | typedef struct sigaltstack { | ||
| 145 | void *ss_sp; | ||
| 146 | int ss_flags; | ||
| 147 | size_t ss_size; | ||
| 148 | } stack_t; | ||
| 149 | |||
| 150 | #ifdef __KERNEL__ | ||
| 151 | |||
| 152 | #include <asm/sigcontext.h> | ||
| 153 | #undef __HAVE_ARCH_SIG_BITOPS | ||
| 154 | |||
| 155 | #define ptrace_signal_deliver(regs, cookie) do { } while (0) | ||
| 156 | |||
| 157 | #endif /* __KERNEL__ */ | ||
| 158 | |||
| 159 | #endif /* _M68KNOMMU_SIGNAL_H */ | ||
diff --git a/arch/m68knommu/include/asm/smp.h b/arch/m68knommu/include/asm/smp.h deleted file mode 100644 index 9e9bd7e58922..000000000000 --- a/arch/m68knommu/include/asm/smp.h +++ /dev/null | |||
| @@ -1 +0,0 @@ | |||
| 1 | /* nothing required here yet */ | ||
diff --git a/arch/m68knommu/include/asm/socket.h b/arch/m68knommu/include/asm/socket.h deleted file mode 100644 index ac5478bf6371..000000000000 --- a/arch/m68knommu/include/asm/socket.h +++ /dev/null | |||
| @@ -1 +0,0 @@ | |||
| 1 | #include <asm-m68k/socket.h> | ||
diff --git a/arch/m68knommu/include/asm/sockios.h b/arch/m68knommu/include/asm/sockios.h deleted file mode 100644 index dcc6a8900ce2..000000000000 --- a/arch/m68knommu/include/asm/sockios.h +++ /dev/null | |||
| @@ -1 +0,0 @@ | |||
| 1 | #include <asm-m68k/sockios.h> | ||
diff --git a/arch/m68knommu/include/asm/spinlock.h b/arch/m68knommu/include/asm/spinlock.h deleted file mode 100644 index 6bb1f06c4781..000000000000 --- a/arch/m68knommu/include/asm/spinlock.h +++ /dev/null | |||
| @@ -1 +0,0 @@ | |||
| 1 | #include <asm-m68k/spinlock.h> | ||
diff --git a/arch/m68knommu/include/asm/stat.h b/arch/m68knommu/include/asm/stat.h deleted file mode 100644 index 3d4b260e7c03..000000000000 --- a/arch/m68knommu/include/asm/stat.h +++ /dev/null | |||
| @@ -1 +0,0 @@ | |||
| 1 | #include <asm-m68k/stat.h> | ||
diff --git a/arch/m68knommu/include/asm/statfs.h b/arch/m68knommu/include/asm/statfs.h deleted file mode 100644 index 2ce99eaf0970..000000000000 --- a/arch/m68knommu/include/asm/statfs.h +++ /dev/null | |||
| @@ -1 +0,0 @@ | |||
| 1 | #include <asm-m68k/statfs.h> | ||
diff --git a/arch/m68knommu/include/asm/string.h b/arch/m68knommu/include/asm/string.h deleted file mode 100644 index af09e17000fc..000000000000 --- a/arch/m68knommu/include/asm/string.h +++ /dev/null | |||
| @@ -1,126 +0,0 @@ | |||
| 1 | #ifndef _M68KNOMMU_STRING_H_ | ||
| 2 | #define _M68KNOMMU_STRING_H_ | ||
| 3 | |||
| 4 | #ifdef __KERNEL__ /* only set these up for kernel code */ | ||
| 5 | |||
| 6 | #include <asm/setup.h> | ||
| 7 | #include <asm/page.h> | ||
| 8 | |||
| 9 | #define __HAVE_ARCH_STRCPY | ||
| 10 | static inline char * strcpy(char * dest,const char *src) | ||
| 11 | { | ||
| 12 | char *xdest = dest; | ||
| 13 | |||
| 14 | __asm__ __volatile__ | ||
| 15 | ("1:\tmoveb %1@+,%0@+\n\t" | ||
| 16 | "jne 1b" | ||
| 17 | : "=a" (dest), "=a" (src) | ||
| 18 | : "0" (dest), "1" (src) : "memory"); | ||
| 19 | return xdest; | ||
| 20 | } | ||
| 21 | |||
| 22 | #define __HAVE_ARCH_STRNCPY | ||
| 23 | static inline char * strncpy(char *dest, const char *src, size_t n) | ||
| 24 | { | ||
| 25 | char *xdest = dest; | ||
| 26 | |||
| 27 | if (n == 0) | ||
| 28 | return xdest; | ||
| 29 | |||
| 30 | __asm__ __volatile__ | ||
| 31 | ("1:\tmoveb %1@+,%0@+\n\t" | ||
| 32 | "jeq 2f\n\t" | ||
| 33 | "subql #1,%2\n\t" | ||
| 34 | "jne 1b\n\t" | ||
| 35 | "2:" | ||
| 36 | : "=a" (dest), "=a" (src), "=d" (n) | ||
| 37 | : "0" (dest), "1" (src), "2" (n) | ||
| 38 | : "memory"); | ||
| 39 | return xdest; | ||
| 40 | } | ||
| 41 | |||
| 42 | |||
| 43 | #ifndef CONFIG_COLDFIRE | ||
| 44 | |||
| 45 | #define __HAVE_ARCH_STRCMP | ||
| 46 | static inline int strcmp(const char * cs,const char * ct) | ||
| 47 | { | ||
| 48 | char __res; | ||
| 49 | |||
| 50 | __asm__ | ||
| 51 | ("1:\tmoveb %0@+,%2\n\t" /* get *cs */ | ||
| 52 | "cmpb %1@+,%2\n\t" /* compare a byte */ | ||
| 53 | "jne 2f\n\t" /* not equal, break out */ | ||
| 54 | "tstb %2\n\t" /* at end of cs? */ | ||
| 55 | "jne 1b\n\t" /* no, keep going */ | ||
| 56 | "jra 3f\n\t" /* strings are equal */ | ||
| 57 | "2:\tsubb %1@-,%2\n\t" /* *cs - *ct */ | ||
| 58 | "3:" | ||
| 59 | : "=a" (cs), "=a" (ct), "=d" (__res) | ||
| 60 | : "0" (cs), "1" (ct)); | ||
| 61 | |||
| 62 | return __res; | ||
| 63 | } | ||
| 64 | |||
| 65 | #define __HAVE_ARCH_STRNCMP | ||
| 66 | static inline int strncmp(const char * cs,const char * ct,size_t count) | ||
| 67 | { | ||
| 68 | char __res; | ||
| 69 | |||
| 70 | if (!count) | ||
| 71 | return 0; | ||
| 72 | __asm__ | ||
| 73 | ("1:\tmovb %0@+,%3\n\t" /* get *cs */ | ||
| 74 | "cmpb %1@+,%3\n\t" /* compare a byte */ | ||
| 75 | "jne 3f\n\t" /* not equal, break out */ | ||
| 76 | "tstb %3\n\t" /* at end of cs? */ | ||
| 77 | "jeq 4f\n\t" /* yes, all done */ | ||
| 78 | "subql #1,%2\n\t" /* no, adjust count */ | ||
| 79 | "jne 1b\n\t" /* more to do, keep going */ | ||
| 80 | "2:\tmoveq #0,%3\n\t" /* strings are equal */ | ||
| 81 | "jra 4f\n\t" | ||
| 82 | "3:\tsubb %1@-,%3\n\t" /* *cs - *ct */ | ||
| 83 | "4:" | ||
| 84 | : "=a" (cs), "=a" (ct), "=d" (count), "=d" (__res) | ||
| 85 | : "0" (cs), "1" (ct), "2" (count)); | ||
| 86 | return __res; | ||
| 87 | } | ||
| 88 | |||
| 89 | #endif /* CONFIG_COLDFIRE */ | ||
| 90 | |||
| 91 | #define __HAVE_ARCH_MEMSET | ||
| 92 | extern void * memset(void * s, int c, size_t count); | ||
| 93 | |||
| 94 | #define __HAVE_ARCH_MEMCPY | ||
| 95 | extern void * memcpy(void *d, const void *s, size_t count); | ||
| 96 | |||
| 97 | #else /* KERNEL */ | ||
| 98 | |||
| 99 | /* | ||
| 100 | * let user libraries deal with these, | ||
| 101 | * IMHO the kernel has no place defining these functions for user apps | ||
| 102 | */ | ||
| 103 | |||
| 104 | #define __HAVE_ARCH_STRCPY 1 | ||
| 105 | #define __HAVE_ARCH_STRNCPY 1 | ||
| 106 | #define __HAVE_ARCH_STRCAT 1 | ||
| 107 | #define __HAVE_ARCH_STRNCAT 1 | ||
| 108 | #define __HAVE_ARCH_STRCMP 1 | ||
| 109 | #define __HAVE_ARCH_STRNCMP 1 | ||
| 110 | #define __HAVE_ARCH_STRNICMP 1 | ||
| 111 | #define __HAVE_ARCH_STRCHR 1 | ||
| 112 | #define __HAVE_ARCH_STRRCHR 1 | ||
| 113 | #define __HAVE_ARCH_STRSTR 1 | ||
| 114 | #define __HAVE_ARCH_STRLEN 1 | ||
| 115 | #define __HAVE_ARCH_STRNLEN 1 | ||
| 116 | #define __HAVE_ARCH_MEMSET 1 | ||
| 117 | #define __HAVE_ARCH_MEMCPY 1 | ||
| 118 | #define __HAVE_ARCH_MEMMOVE 1 | ||
| 119 | #define __HAVE_ARCH_MEMSCAN 1 | ||
| 120 | #define __HAVE_ARCH_MEMCMP 1 | ||
| 121 | #define __HAVE_ARCH_MEMCHR 1 | ||
| 122 | #define __HAVE_ARCH_STRTOK 1 | ||
| 123 | |||
| 124 | #endif /* KERNEL */ | ||
| 125 | |||
| 126 | #endif /* _M68K_STRING_H_ */ | ||
diff --git a/arch/m68knommu/include/asm/swab.h b/arch/m68knommu/include/asm/swab.h deleted file mode 100644 index e582257db300..000000000000 --- a/arch/m68knommu/include/asm/swab.h +++ /dev/null | |||
| @@ -1,24 +0,0 @@ | |||
| 1 | #ifndef _M68KNOMMU_SWAB_H | ||
| 2 | #define _M68KNOMMU_SWAB_H | ||
| 3 | |||
| 4 | #include <linux/types.h> | ||
| 5 | |||
| 6 | #if defined(__GNUC__) && !defined(__STRICT_ANSI__) || defined(__KERNEL__) | ||
| 7 | # define __SWAB_64_THRU_32__ | ||
| 8 | #endif | ||
| 9 | |||
| 10 | #if defined (__mcfisaaplus__) || defined (__mcfisac__) | ||
| 11 | static inline __attribute_const__ __u32 __arch_swab32(__u32 val) | ||
| 12 | { | ||
| 13 | asm( | ||
| 14 | "byterev %0" | ||
| 15 | : "=d" (val) | ||
| 16 | : "0" (val) | ||
| 17 | ); | ||
| 18 | return val; | ||
| 19 | } | ||
| 20 | |||
| 21 | #define __arch_swab32 __arch_swab32 | ||
| 22 | #endif | ||
| 23 | |||
| 24 | #endif /* _M68KNOMMU_SWAB_H */ | ||
diff --git a/arch/m68knommu/include/asm/system.h b/arch/m68knommu/include/asm/system.h deleted file mode 100644 index 40f49de69821..000000000000 --- a/arch/m68knommu/include/asm/system.h +++ /dev/null | |||
| @@ -1,324 +0,0 @@ | |||
| 1 | #ifndef _M68KNOMMU_SYSTEM_H | ||
| 2 | #define _M68KNOMMU_SYSTEM_H | ||
| 3 | |||
| 4 | #include <linux/linkage.h> | ||
| 5 | #include <asm/segment.h> | ||
| 6 | #include <asm/entry.h> | ||
| 7 | |||
| 8 | /* | ||
| 9 | * switch_to(n) should switch tasks to task ptr, first checking that | ||
| 10 | * ptr isn't the current task, in which case it does nothing. This | ||
| 11 | * also clears the TS-flag if the task we switched to has used the | ||
| 12 | * math co-processor latest. | ||
| 13 | */ | ||
| 14 | /* | ||
| 15 | * switch_to() saves the extra registers, that are not saved | ||
| 16 | * automatically by SAVE_SWITCH_STACK in resume(), ie. d0-d5 and | ||
| 17 | * a0-a1. Some of these are used by schedule() and its predecessors | ||
| 18 | * and so we might get see unexpected behaviors when a task returns | ||
| 19 | * with unexpected register values. | ||
| 20 | * | ||
| 21 | * syscall stores these registers itself and none of them are used | ||
| 22 | * by syscall after the function in the syscall has been called. | ||
| 23 | * | ||
| 24 | * Beware that resume now expects *next to be in d1 and the offset of | ||
| 25 | * tss to be in a1. This saves a few instructions as we no longer have | ||
| 26 | * to push them onto the stack and read them back right after. | ||
| 27 | * | ||
| 28 | * 02/17/96 - Jes Sorensen (jds@kom.auc.dk) | ||
| 29 | * | ||
| 30 | * Changed 96/09/19 by Andreas Schwab | ||
| 31 | * pass prev in a0, next in a1, offset of tss in d1, and whether | ||
| 32 | * the mm structures are shared in d2 (to avoid atc flushing). | ||
| 33 | */ | ||
| 34 | asmlinkage void resume(void); | ||
| 35 | #define switch_to(prev,next,last) \ | ||
| 36 | { \ | ||
| 37 | void *_last; \ | ||
| 38 | __asm__ __volatile__( \ | ||
| 39 | "movel %1, %%a0\n\t" \ | ||
| 40 | "movel %2, %%a1\n\t" \ | ||
| 41 | "jbsr resume\n\t" \ | ||
| 42 | "movel %%d1, %0\n\t" \ | ||
| 43 | : "=d" (_last) \ | ||
| 44 | : "d" (prev), "d" (next) \ | ||
| 45 | : "cc", "d0", "d1", "d2", "d3", "d4", "d5", "a0", "a1"); \ | ||
| 46 | (last) = _last; \ | ||
| 47 | } | ||
| 48 | |||
| 49 | #ifdef CONFIG_COLDFIRE | ||
| 50 | #define local_irq_enable() __asm__ __volatile__ ( \ | ||
| 51 | "move %/sr,%%d0\n\t" \ | ||
| 52 | "andi.l #0xf8ff,%%d0\n\t" \ | ||
| 53 | "move %%d0,%/sr\n" \ | ||
| 54 | : /* no outputs */ \ | ||
| 55 | : \ | ||
| 56 | : "cc", "%d0", "memory") | ||
| 57 | #define local_irq_disable() __asm__ __volatile__ ( \ | ||
| 58 | "move %/sr,%%d0\n\t" \ | ||
| 59 | "ori.l #0x0700,%%d0\n\t" \ | ||
| 60 | "move %%d0,%/sr\n" \ | ||
| 61 | : /* no outputs */ \ | ||
| 62 | : \ | ||
| 63 | : "cc", "%d0", "memory") | ||
| 64 | /* For spinlocks etc */ | ||
| 65 | #define local_irq_save(x) __asm__ __volatile__ ( \ | ||
| 66 | "movew %%sr,%0\n\t" \ | ||
| 67 | "movew #0x0700,%%d0\n\t" \ | ||
| 68 | "or.l %0,%%d0\n\t" \ | ||
| 69 | "movew %%d0,%/sr" \ | ||
| 70 | : "=d" (x) \ | ||
| 71 | : \ | ||
| 72 | : "cc", "%d0", "memory") | ||
| 73 | #else | ||
| 74 | |||
| 75 | /* portable version */ /* FIXME - see entry.h*/ | ||
| 76 | #define ALLOWINT 0xf8ff | ||
| 77 | |||
| 78 | #define local_irq_enable() asm volatile ("andiw %0,%%sr": : "i" (ALLOWINT) : "memory") | ||
| 79 | #define local_irq_disable() asm volatile ("oriw #0x0700,%%sr": : : "memory") | ||
| 80 | #endif | ||
| 81 | |||
| 82 | #define local_save_flags(x) asm volatile ("movew %%sr,%0":"=d" (x) : : "memory") | ||
| 83 | #define local_irq_restore(x) asm volatile ("movew %0,%%sr": :"d" (x) : "memory") | ||
| 84 | |||
| 85 | /* For spinlocks etc */ | ||
| 86 | #ifndef local_irq_save | ||
| 87 | #define local_irq_save(x) do { local_save_flags(x); local_irq_disable(); } while (0) | ||
| 88 | #endif | ||
| 89 | |||
| 90 | #define irqs_disabled() \ | ||
| 91 | ({ \ | ||
| 92 | unsigned long flags; \ | ||
| 93 | local_save_flags(flags); \ | ||
| 94 | ((flags & 0x0700) == 0x0700); \ | ||
| 95 | }) | ||
| 96 | |||
| 97 | #define iret() __asm__ __volatile__ ("rte": : :"memory", "sp", "cc") | ||
| 98 | |||
| 99 | /* | ||
| 100 | * Force strict CPU ordering. | ||
| 101 | * Not really required on m68k... | ||
| 102 | */ | ||
| 103 | #define nop() asm volatile ("nop"::) | ||
| 104 | #define mb() asm volatile ("" : : :"memory") | ||
| 105 | #define rmb() asm volatile ("" : : :"memory") | ||
| 106 | #define wmb() asm volatile ("" : : :"memory") | ||
| 107 | #define set_mb(var, value) ({ (var) = (value); wmb(); }) | ||
| 108 | |||
| 109 | #ifdef CONFIG_SMP | ||
| 110 | #define smp_mb() mb() | ||
| 111 | #define smp_rmb() rmb() | ||
| 112 | #define smp_wmb() wmb() | ||
| 113 | #define smp_read_barrier_depends() read_barrier_depends() | ||
| 114 | #else | ||
| 115 | #define smp_mb() barrier() | ||
| 116 | #define smp_rmb() barrier() | ||
| 117 | #define smp_wmb() barrier() | ||
| 118 | #define smp_read_barrier_depends() do { } while(0) | ||
| 119 | #endif | ||
| 120 | |||
| 121 | #define read_barrier_depends() ((void)0) | ||
| 122 | |||
| 123 | #define xchg(ptr,x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr)))) | ||
| 124 | |||
| 125 | struct __xchg_dummy { unsigned long a[100]; }; | ||
| 126 | #define __xg(x) ((volatile struct __xchg_dummy *)(x)) | ||
| 127 | |||
| 128 | #ifndef CONFIG_RMW_INSNS | ||
| 129 | static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int size) | ||
| 130 | { | ||
| 131 | unsigned long tmp, flags; | ||
| 132 | |||
| 133 | local_irq_save(flags); | ||
| 134 | |||
| 135 | switch (size) { | ||
| 136 | case 1: | ||
| 137 | __asm__ __volatile__ | ||
| 138 | ("moveb %2,%0\n\t" | ||
| 139 | "moveb %1,%2" | ||
| 140 | : "=&d" (tmp) : "d" (x), "m" (*__xg(ptr)) : "memory"); | ||
| 141 | break; | ||
| 142 | case 2: | ||
| 143 | __asm__ __volatile__ | ||
| 144 | ("movew %2,%0\n\t" | ||
| 145 | "movew %1,%2" | ||
| 146 | : "=&d" (tmp) : "d" (x), "m" (*__xg(ptr)) : "memory"); | ||
| 147 | break; | ||
| 148 | case 4: | ||
| 149 | __asm__ __volatile__ | ||
| 150 | ("movel %2,%0\n\t" | ||
| 151 | "movel %1,%2" | ||
| 152 | : "=&d" (tmp) : "d" (x), "m" (*__xg(ptr)) : "memory"); | ||
| 153 | break; | ||
| 154 | } | ||
| 155 | local_irq_restore(flags); | ||
| 156 | return tmp; | ||
| 157 | } | ||
| 158 | #else | ||
| 159 | static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int size) | ||
| 160 | { | ||
| 161 | switch (size) { | ||
| 162 | case 1: | ||
| 163 | __asm__ __volatile__ | ||
| 164 | ("moveb %2,%0\n\t" | ||
| 165 | "1:\n\t" | ||
| 166 | "casb %0,%1,%2\n\t" | ||
| 167 | "jne 1b" | ||
| 168 | : "=&d" (x) : "d" (x), "m" (*__xg(ptr)) : "memory"); | ||
| 169 | break; | ||
| 170 | case 2: | ||
| 171 | __asm__ __volatile__ | ||
| 172 | ("movew %2,%0\n\t" | ||
| 173 | "1:\n\t" | ||
| 174 | "casw %0,%1,%2\n\t" | ||
| 175 | "jne 1b" | ||
| 176 | : "=&d" (x) : "d" (x), "m" (*__xg(ptr)) : "memory"); | ||
| 177 | break; | ||
| 178 | case 4: | ||
| 179 | __asm__ __volatile__ | ||
| 180 | ("movel %2,%0\n\t" | ||
| 181 | "1:\n\t" | ||
| 182 | "casl %0,%1,%2\n\t" | ||
| 183 | "jne 1b" | ||
| 184 | : "=&d" (x) : "d" (x), "m" (*__xg(ptr)) : "memory"); | ||
| 185 | break; | ||
| 186 | } | ||
| 187 | return x; | ||
| 188 | } | ||
| 189 | #endif | ||
| 190 | |||
| 191 | #include <asm-generic/cmpxchg-local.h> | ||
| 192 | |||
| 193 | /* | ||
| 194 | * cmpxchg_local and cmpxchg64_local are atomic wrt current CPU. Always make | ||
| 195 | * them available. | ||
| 196 | */ | ||
| 197 | #define cmpxchg_local(ptr, o, n) \ | ||
| 198 | ((__typeof__(*(ptr)))__cmpxchg_local_generic((ptr), (unsigned long)(o),\ | ||
| 199 | (unsigned long)(n), sizeof(*(ptr)))) | ||
| 200 | #define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n)) | ||
| 201 | |||
| 202 | #ifndef CONFIG_SMP | ||
| 203 | #include <asm-generic/cmpxchg.h> | ||
| 204 | #endif | ||
| 205 | |||
| 206 | #if defined( CONFIG_M68328 ) || defined( CONFIG_M68EZ328 ) || \ | ||
| 207 | defined (CONFIG_M68360) || defined( CONFIG_M68VZ328 ) | ||
| 208 | #define HARD_RESET_NOW() ({ \ | ||
| 209 | local_irq_disable(); \ | ||
| 210 | asm(" \ | ||
| 211 | moveal #0x10c00000, %a0; \ | ||
| 212 | moveb #0, 0xFFFFF300; \ | ||
| 213 | moveal 0(%a0), %sp; \ | ||
| 214 | moveal 4(%a0), %a0; \ | ||
| 215 | jmp (%a0); \ | ||
| 216 | "); \ | ||
| 217 | }) | ||
| 218 | #endif | ||
| 219 | |||
| 220 | #ifdef CONFIG_COLDFIRE | ||
| 221 | #if defined(CONFIG_M5272) && defined(CONFIG_NETtel) | ||
| 222 | /* | ||
| 223 | * Need to account for broken early mask of 5272 silicon. So don't | ||
| 224 | * jump through the original start address. Jump strait into the | ||
| 225 | * known start of the FLASH code. | ||
| 226 | */ | ||
| 227 | #define HARD_RESET_NOW() ({ \ | ||
| 228 | asm(" \ | ||
| 229 | movew #0x2700, %sr; \ | ||
| 230 | jmp 0xf0000400; \ | ||
| 231 | "); \ | ||
| 232 | }) | ||
| 233 | #elif defined(CONFIG_NETtel) || defined(CONFIG_eLIA) || \ | ||
| 234 | defined(CONFIG_SECUREEDGEMP3) || defined(CONFIG_CLEOPATRA) | ||
| 235 | #define HARD_RESET_NOW() ({ \ | ||
| 236 | asm(" \ | ||
| 237 | movew #0x2700, %sr; \ | ||
| 238 | moveal #0x10000044, %a0; \ | ||
| 239 | movel #0xffffffff, (%a0); \ | ||
| 240 | moveal #0x10000001, %a0; \ | ||
| 241 | moveb #0x00, (%a0); \ | ||
| 242 | moveal #0xf0000004, %a0; \ | ||
| 243 | moveal (%a0), %a0; \ | ||
| 244 | jmp (%a0); \ | ||
| 245 | "); \ | ||
| 246 | }) | ||
| 247 | #elif defined(CONFIG_M5272) | ||
| 248 | /* | ||
| 249 | * Retrieve the boot address in flash using CSBR0 and CSOR0 | ||
| 250 | * find the reset vector at flash_address + 4 (e.g. 0x400) | ||
| 251 | * remap it in the flash's current location (e.g. 0xf0000400) | ||
| 252 | * and jump there. | ||
| 253 | */ | ||
| 254 | #define HARD_RESET_NOW() ({ \ | ||
| 255 | asm(" \ | ||
| 256 | movew #0x2700, %%sr; \ | ||
| 257 | move.l %0+0x40,%%d0; \ | ||
| 258 | and.l %0+0x44,%%d0; \ | ||
| 259 | andi.l #0xfffff000,%%d0; \ | ||
| 260 | mov.l %%d0,%%a0; \ | ||
| 261 | or.l 4(%%a0),%%d0; \ | ||
| 262 | mov.l %%d0,%%a0; \ | ||
| 263 | jmp (%%a0);" \ | ||
| 264 | : /* No output */ \ | ||
| 265 | : "o" (*(char *)MCF_MBAR) ); \ | ||
| 266 | }) | ||
| 267 | #elif defined(CONFIG_M528x) | ||
| 268 | /* | ||
| 269 | * The MCF528x has a bit (SOFTRST) in memory (Reset Control Register RCR), | ||
| 270 | * that when set, resets the MCF528x. | ||
| 271 | */ | ||
| 272 | #define HARD_RESET_NOW() \ | ||
| 273 | ({ \ | ||
| 274 | unsigned char volatile *reset; \ | ||
| 275 | asm("move.w #0x2700, %sr"); \ | ||
| 276 | reset = ((volatile unsigned char *)(MCF_IPSBAR + 0x110000)); \ | ||
| 277 | while(1) \ | ||
| 278 | *reset |= (0x01 << 7);\ | ||
| 279 | }) | ||
| 280 | #elif defined(CONFIG_M523x) | ||
| 281 | #define HARD_RESET_NOW() ({ \ | ||
| 282 | asm(" \ | ||
| 283 | movew #0x2700, %sr; \ | ||
| 284 | movel #0x01000000, %sp; \ | ||
| 285 | moveal #0x40110000, %a0; \ | ||
| 286 | moveb #0x80, (%a0); \ | ||
| 287 | "); \ | ||
| 288 | }) | ||
| 289 | #elif defined(CONFIG_M520x) | ||
| 290 | /* | ||
| 291 | * The MCF5208 has a bit (SOFTRST) in memory (Reset Control Register | ||
| 292 | * RCR), that when set, resets the MCF5208. | ||
| 293 | */ | ||
| 294 | #define HARD_RESET_NOW() \ | ||
| 295 | ({ \ | ||
| 296 | unsigned char volatile *reset; \ | ||
| 297 | asm("move.w #0x2700, %sr"); \ | ||
| 298 | reset = ((volatile unsigned char *)(MCF_IPSBAR + 0xA0000)); \ | ||
| 299 | while(1) \ | ||
| 300 | *reset |= 0x80; \ | ||
| 301 | }) | ||
| 302 | #else | ||
| 303 | #define HARD_RESET_NOW() ({ \ | ||
| 304 | asm(" \ | ||
| 305 | movew #0x2700, %sr; \ | ||
| 306 | moveal #0x4, %a0; \ | ||
| 307 | moveal (%a0), %a0; \ | ||
| 308 | jmp (%a0); \ | ||
| 309 | "); \ | ||
| 310 | }) | ||
| 311 | #endif | ||
| 312 | #endif | ||
| 313 | #define arch_align_stack(x) (x) | ||
| 314 | |||
| 315 | |||
| 316 | static inline int irqs_disabled_flags(unsigned long flags) | ||
| 317 | { | ||
| 318 | if (flags & 0x0700) | ||
| 319 | return 0; | ||
| 320 | else | ||
| 321 | return 1; | ||
| 322 | } | ||
| 323 | |||
| 324 | #endif /* _M68KNOMMU_SYSTEM_H */ | ||
diff --git a/arch/m68knommu/include/asm/termbits.h b/arch/m68knommu/include/asm/termbits.h deleted file mode 100644 index 05dd6bc27285..000000000000 --- a/arch/m68knommu/include/asm/termbits.h +++ /dev/null | |||
| @@ -1 +0,0 @@ | |||
| 1 | #include <asm-m68k/termbits.h> | ||
diff --git a/arch/m68knommu/include/asm/termios.h b/arch/m68knommu/include/asm/termios.h deleted file mode 100644 index e7337881a985..000000000000 --- a/arch/m68knommu/include/asm/termios.h +++ /dev/null | |||
| @@ -1 +0,0 @@ | |||
| 1 | #include <asm-m68k/termios.h> | ||
diff --git a/arch/m68knommu/include/asm/thread_info.h b/arch/m68knommu/include/asm/thread_info.h deleted file mode 100644 index 82529f424ea3..000000000000 --- a/arch/m68knommu/include/asm/thread_info.h +++ /dev/null | |||
| @@ -1,100 +0,0 @@ | |||
| 1 | /* thread_info.h: m68knommu low-level thread information | ||
| 2 | * adapted from the i386 and PPC versions by Greg Ungerer (gerg@snapgear.com) | ||
| 3 | * | ||
| 4 | * Copyright (C) 2002 David Howells (dhowells@redhat.com) | ||
| 5 | * - Incorporating suggestions made by Linus Torvalds and Dave Miller | ||
| 6 | */ | ||
| 7 | |||
| 8 | #ifndef _ASM_THREAD_INFO_H | ||
| 9 | #define _ASM_THREAD_INFO_H | ||
| 10 | |||
| 11 | #include <asm/page.h> | ||
| 12 | |||
| 13 | #ifdef __KERNEL__ | ||
| 14 | |||
| 15 | #ifndef __ASSEMBLY__ | ||
| 16 | |||
| 17 | /* | ||
| 18 | * Size of kernel stack for each process. This must be a power of 2... | ||
| 19 | */ | ||
| 20 | #ifdef CONFIG_4KSTACKS | ||
| 21 | #define THREAD_SIZE_ORDER (0) | ||
| 22 | #else | ||
| 23 | #define THREAD_SIZE_ORDER (1) | ||
| 24 | #endif | ||
| 25 | |||
| 26 | /* | ||
| 27 | * for asm files, THREAD_SIZE is now generated by asm-offsets.c | ||
| 28 | */ | ||
| 29 | #define THREAD_SIZE (PAGE_SIZE<<THREAD_SIZE_ORDER) | ||
| 30 | |||
| 31 | /* | ||
| 32 | * low level task data. | ||
| 33 | */ | ||
| 34 | struct thread_info { | ||
| 35 | struct task_struct *task; /* main task structure */ | ||
| 36 | struct exec_domain *exec_domain; /* execution domain */ | ||
| 37 | unsigned long flags; /* low level flags */ | ||
| 38 | int cpu; /* cpu we're on */ | ||
| 39 | int preempt_count; /* 0 => preemptable, <0 => BUG */ | ||
| 40 | struct restart_block restart_block; | ||
| 41 | }; | ||
| 42 | |||
| 43 | /* | ||
| 44 | * macros/functions for gaining access to the thread information structure | ||
| 45 | */ | ||
| 46 | #define INIT_THREAD_INFO(tsk) \ | ||
| 47 | { \ | ||
| 48 | .task = &tsk, \ | ||
| 49 | .exec_domain = &default_exec_domain, \ | ||
| 50 | .flags = 0, \ | ||
| 51 | .cpu = 0, \ | ||
| 52 | .restart_block = { \ | ||
| 53 | .fn = do_no_restart_syscall, \ | ||
| 54 | }, \ | ||
| 55 | } | ||
| 56 | |||
| 57 | #define init_thread_info (init_thread_union.thread_info) | ||
| 58 | #define init_stack (init_thread_union.stack) | ||
| 59 | |||
| 60 | |||
| 61 | /* how to get the thread information struct from C */ | ||
| 62 | static inline struct thread_info *current_thread_info(void) | ||
| 63 | { | ||
| 64 | struct thread_info *ti; | ||
| 65 | __asm__( | ||
| 66 | "move.l %%sp, %0 \n\t" | ||
| 67 | "and.l %1, %0" | ||
| 68 | : "=&d"(ti) | ||
| 69 | : "di" (~(THREAD_SIZE-1)) | ||
| 70 | ); | ||
| 71 | return ti; | ||
| 72 | } | ||
| 73 | |||
| 74 | #endif /* __ASSEMBLY__ */ | ||
| 75 | |||
| 76 | #define PREEMPT_ACTIVE 0x4000000 | ||
| 77 | |||
| 78 | /* | ||
| 79 | * thread information flag bit numbers | ||
| 80 | */ | ||
| 81 | #define TIF_SYSCALL_TRACE 0 /* syscall trace active */ | ||
| 82 | #define TIF_SIGPENDING 1 /* signal pending */ | ||
| 83 | #define TIF_NEED_RESCHED 2 /* rescheduling necessary */ | ||
| 84 | #define TIF_POLLING_NRFLAG 3 /* true if poll_idle() is polling | ||
| 85 | TIF_NEED_RESCHED */ | ||
| 86 | #define TIF_MEMDIE 4 | ||
| 87 | #define TIF_FREEZE 16 /* is freezing for suspend */ | ||
| 88 | |||
| 89 | /* as above, but as bit values */ | ||
| 90 | #define _TIF_SYSCALL_TRACE (1<<TIF_SYSCALL_TRACE) | ||
| 91 | #define _TIF_SIGPENDING (1<<TIF_SIGPENDING) | ||
| 92 | #define _TIF_NEED_RESCHED (1<<TIF_NEED_RESCHED) | ||
| 93 | #define _TIF_POLLING_NRFLAG (1<<TIF_POLLING_NRFLAG) | ||
| 94 | #define _TIF_FREEZE (1<<TIF_FREEZE) | ||
| 95 | |||
| 96 | #define _TIF_WORK_MASK 0x0000FFFE /* work to do on interrupt/exception return */ | ||
| 97 | |||
| 98 | #endif /* __KERNEL__ */ | ||
| 99 | |||
| 100 | #endif /* _ASM_THREAD_INFO_H */ | ||
diff --git a/arch/m68knommu/include/asm/timex.h b/arch/m68knommu/include/asm/timex.h deleted file mode 100644 index 109050f3fe91..000000000000 --- a/arch/m68knommu/include/asm/timex.h +++ /dev/null | |||
| @@ -1,23 +0,0 @@ | |||
| 1 | /* | ||
| 2 | * linux/include/asm-m68knommu/timex.h | ||
| 3 | * | ||
| 4 | * m68knommu architecture timex specifications | ||
| 5 | */ | ||
| 6 | #ifndef _ASM_M68KNOMMU_TIMEX_H | ||
| 7 | #define _ASM_M68KNOMMU_TIMEX_H | ||
| 8 | |||
| 9 | #ifdef CONFIG_COLDFIRE | ||
| 10 | #include <asm/coldfire.h> | ||
| 11 | #define CLOCK_TICK_RATE MCF_CLK | ||
| 12 | #else | ||
| 13 | #define CLOCK_TICK_RATE 1193180 /* Underlying HZ */ | ||
| 14 | #endif | ||
| 15 | |||
| 16 | typedef unsigned long cycles_t; | ||
| 17 | |||
| 18 | static inline cycles_t get_cycles(void) | ||
| 19 | { | ||
| 20 | return 0; | ||
| 21 | } | ||
| 22 | |||
| 23 | #endif | ||
diff --git a/arch/m68knommu/include/asm/tlb.h b/arch/m68knommu/include/asm/tlb.h deleted file mode 100644 index 77a7c51ca299..000000000000 --- a/arch/m68knommu/include/asm/tlb.h +++ /dev/null | |||
| @@ -1 +0,0 @@ | |||
| 1 | #include <asm-m68k/tlb.h> | ||
diff --git a/arch/m68knommu/include/asm/tlbflush.h b/arch/m68knommu/include/asm/tlbflush.h deleted file mode 100644 index a470cfb803eb..000000000000 --- a/arch/m68knommu/include/asm/tlbflush.h +++ /dev/null | |||
| @@ -1,55 +0,0 @@ | |||
| 1 | #ifndef _M68KNOMMU_TLBFLUSH_H | ||
| 2 | #define _M68KNOMMU_TLBFLUSH_H | ||
| 3 | |||
| 4 | /* | ||
| 5 | * Copyright (C) 2000 Lineo, David McCullough <davidm@uclinux.org> | ||
| 6 | * Copyright (C) 2000-2002, Greg Ungerer <gerg@snapgear.com> | ||
| 7 | */ | ||
| 8 | |||
| 9 | #include <asm/setup.h> | ||
| 10 | |||
| 11 | /* | ||
| 12 | * flush all user-space atc entries. | ||
| 13 | */ | ||
| 14 | static inline void __flush_tlb(void) | ||
| 15 | { | ||
| 16 | BUG(); | ||
| 17 | } | ||
| 18 | |||
| 19 | static inline void __flush_tlb_one(unsigned long addr) | ||
| 20 | { | ||
| 21 | BUG(); | ||
| 22 | } | ||
| 23 | |||
| 24 | #define flush_tlb() __flush_tlb() | ||
| 25 | |||
| 26 | /* | ||
| 27 | * flush all atc entries (both kernel and user-space entries). | ||
| 28 | */ | ||
| 29 | static inline void flush_tlb_all(void) | ||
| 30 | { | ||
| 31 | BUG(); | ||
| 32 | } | ||
| 33 | |||
| 34 | static inline void flush_tlb_mm(struct mm_struct *mm) | ||
| 35 | { | ||
| 36 | BUG(); | ||
| 37 | } | ||
| 38 | |||
| 39 | static inline void flush_tlb_page(struct vm_area_struct *vma, unsigned long addr) | ||
| 40 | { | ||
| 41 | BUG(); | ||
| 42 | } | ||
| 43 | |||
| 44 | static inline void flush_tlb_range(struct mm_struct *mm, | ||
| 45 | unsigned long start, unsigned long end) | ||
| 46 | { | ||
| 47 | BUG(); | ||
| 48 | } | ||
| 49 | |||
| 50 | static inline void flush_tlb_kernel_page(unsigned long addr) | ||
| 51 | { | ||
| 52 | BUG(); | ||
| 53 | } | ||
| 54 | |||
| 55 | #endif /* _M68KNOMMU_TLBFLUSH_H */ | ||
diff --git a/arch/m68knommu/include/asm/topology.h b/arch/m68knommu/include/asm/topology.h deleted file mode 100644 index ca173e9f26ff..000000000000 --- a/arch/m68knommu/include/asm/topology.h +++ /dev/null | |||
| @@ -1,6 +0,0 @@ | |||
| 1 | #ifndef _ASM_M68K_TOPOLOGY_H | ||
| 2 | #define _ASM_M68K_TOPOLOGY_H | ||
| 3 | |||
| 4 | #include <asm-generic/topology.h> | ||
| 5 | |||
| 6 | #endif /* _ASM_M68K_TOPOLOGY_H */ | ||
diff --git a/arch/m68knommu/include/asm/traps.h b/arch/m68knommu/include/asm/traps.h deleted file mode 100644 index d0671e5f8e29..000000000000 --- a/arch/m68knommu/include/asm/traps.h +++ /dev/null | |||
| @@ -1,154 +0,0 @@ | |||
| 1 | /* | ||
| 2 | * linux/include/asm/traps.h | ||
| 3 | * | ||
| 4 | * Copyright (C) 1993 Hamish Macdonald | ||
| 5 | * | ||
| 6 | * This file is subject to the terms and conditions of the GNU General Public | ||
| 7 | * License. See the file COPYING in the main directory of this archive | ||
| 8 | * for more details. | ||
| 9 | */ | ||
| 10 | |||
| 11 | #ifndef _M68KNOMMU_TRAPS_H | ||
| 12 | #define _M68KNOMMU_TRAPS_H | ||
| 13 | |||
| 14 | #ifndef __ASSEMBLY__ | ||
| 15 | |||
| 16 | typedef void (*e_vector)(void); | ||
| 17 | |||
| 18 | extern e_vector vectors[]; | ||
| 19 | extern void init_vectors(void); | ||
| 20 | extern void enable_vector(unsigned int irq); | ||
| 21 | extern void disable_vector(unsigned int irq); | ||
| 22 | extern void ack_vector(unsigned int irq); | ||
| 23 | |||
| 24 | #endif | ||
| 25 | |||
| 26 | #define VEC_BUSERR (2) | ||
| 27 | #define VEC_ADDRERR (3) | ||
| 28 | #define VEC_ILLEGAL (4) | ||
| 29 | #define VEC_ZERODIV (5) | ||
| 30 | #define VEC_CHK (6) | ||
| 31 | #define VEC_TRAP (7) | ||
| 32 | #define VEC_PRIV (8) | ||
| 33 | #define VEC_TRACE (9) | ||
| 34 | #define VEC_LINE10 (10) | ||
| 35 | #define VEC_LINE11 (11) | ||
| 36 | #define VEC_RESV1 (12) | ||
| 37 | #define VEC_COPROC (13) | ||
| 38 | #define VEC_FORMAT (14) | ||
| 39 | #define VEC_UNINT (15) | ||
| 40 | #define VEC_SPUR (24) | ||
| 41 | #define VEC_INT1 (25) | ||
| 42 | #define VEC_INT2 (26) | ||
| 43 | #define VEC_INT3 (27) | ||
| 44 | #define VEC_INT4 (28) | ||
| 45 | #define VEC_INT5 (29) | ||
| 46 | #define VEC_INT6 (30) | ||
| 47 | #define VEC_INT7 (31) | ||
| 48 | #define VEC_SYS (32) | ||
| 49 | #define VEC_TRAP1 (33) | ||
| 50 | #define VEC_TRAP2 (34) | ||
| 51 | #define VEC_TRAP3 (35) | ||
| 52 | #define VEC_TRAP4 (36) | ||
| 53 | #define VEC_TRAP5 (37) | ||
| 54 | #define VEC_TRAP6 (38) | ||
| 55 | #define VEC_TRAP7 (39) | ||
| 56 | #define VEC_TRAP8 (40) | ||
| 57 | #define VEC_TRAP9 (41) | ||
| 58 | #define VEC_TRAP10 (42) | ||
| 59 | #define VEC_TRAP11 (43) | ||
| 60 | #define VEC_TRAP12 (44) | ||
| 61 | #define VEC_TRAP13 (45) | ||
| 62 | #define VEC_TRAP14 (46) | ||
| 63 | #define VEC_TRAP15 (47) | ||
| 64 | #define VEC_FPBRUC (48) | ||
| 65 | #define VEC_FPIR (49) | ||
| 66 | #define VEC_FPDIVZ (50) | ||
| 67 | #define VEC_FPUNDER (51) | ||
| 68 | #define VEC_FPOE (52) | ||
| 69 | #define VEC_FPOVER (53) | ||
| 70 | #define VEC_FPNAN (54) | ||
| 71 | #define VEC_FPUNSUP (55) | ||
| 72 | #define VEC_UNIMPEA (60) | ||
| 73 | #define VEC_UNIMPII (61) | ||
| 74 | #define VEC_USER (64) | ||
| 75 | |||
| 76 | #define VECOFF(vec) ((vec)<<2) | ||
| 77 | |||
| 78 | #ifndef __ASSEMBLY__ | ||
| 79 | |||
| 80 | /* Status register bits */ | ||
| 81 | #define PS_T (0x8000) | ||
| 82 | #define PS_S (0x2000) | ||
| 83 | #define PS_M (0x1000) | ||
| 84 | #define PS_C (0x0001) | ||
| 85 | |||
| 86 | /* structure for stack frames */ | ||
| 87 | |||
| 88 | struct frame { | ||
| 89 | struct pt_regs ptregs; | ||
| 90 | union { | ||
| 91 | struct { | ||
| 92 | unsigned long iaddr; /* instruction address */ | ||
| 93 | } fmt2; | ||
| 94 | struct { | ||
| 95 | unsigned long effaddr; /* effective address */ | ||
| 96 | } fmt3; | ||
| 97 | struct { | ||
| 98 | unsigned long effaddr; /* effective address */ | ||
| 99 | unsigned long pc; /* pc of faulted instr */ | ||
| 100 | } fmt4; | ||
| 101 | struct { | ||
| 102 | unsigned long effaddr; /* effective address */ | ||
| 103 | unsigned short ssw; /* special status word */ | ||
| 104 | unsigned short wb3s; /* write back 3 status */ | ||
| 105 | unsigned short wb2s; /* write back 2 status */ | ||
| 106 | unsigned short wb1s; /* write back 1 status */ | ||
| 107 | unsigned long faddr; /* fault address */ | ||
| 108 | unsigned long wb3a; /* write back 3 address */ | ||
| 109 | unsigned long wb3d; /* write back 3 data */ | ||
| 110 | unsigned long wb2a; /* write back 2 address */ | ||
| 111 | unsigned long wb2d; /* write back 2 data */ | ||
| 112 | unsigned long wb1a; /* write back 1 address */ | ||
| 113 | unsigned long wb1dpd0; /* write back 1 data/push data 0*/ | ||
| 114 | unsigned long pd1; /* push data 1*/ | ||
| 115 | unsigned long pd2; /* push data 2*/ | ||
| 116 | unsigned long pd3; /* push data 3*/ | ||
| 117 | } fmt7; | ||
| 118 | struct { | ||
| 119 | unsigned long iaddr; /* instruction address */ | ||
| 120 | unsigned short int1[4]; /* internal registers */ | ||
| 121 | } fmt9; | ||
| 122 | struct { | ||
| 123 | unsigned short int1; | ||
| 124 | unsigned short ssw; /* special status word */ | ||
| 125 | unsigned short isc; /* instruction stage c */ | ||
| 126 | unsigned short isb; /* instruction stage b */ | ||
| 127 | unsigned long daddr; /* data cycle fault address */ | ||
| 128 | unsigned short int2[2]; | ||
| 129 | unsigned long dobuf; /* data cycle output buffer */ | ||
| 130 | unsigned short int3[2]; | ||
| 131 | } fmta; | ||
| 132 | struct { | ||
| 133 | unsigned short int1; | ||
| 134 | unsigned short ssw; /* special status word */ | ||
| 135 | unsigned short isc; /* instruction stage c */ | ||
| 136 | unsigned short isb; /* instruction stage b */ | ||
| 137 | unsigned long daddr; /* data cycle fault address */ | ||
| 138 | unsigned short int2[2]; | ||
| 139 | unsigned long dobuf; /* data cycle output buffer */ | ||
| 140 | unsigned short int3[4]; | ||
| 141 | unsigned long baddr; /* stage B address */ | ||
| 142 | unsigned short int4[2]; | ||
| 143 | unsigned long dibuf; /* data cycle input buffer */ | ||
| 144 | unsigned short int5[3]; | ||
| 145 | unsigned ver : 4; /* stack frame version # */ | ||
| 146 | unsigned int6:12; | ||
| 147 | unsigned short int7[18]; | ||
| 148 | } fmtb; | ||
| 149 | } un; | ||
| 150 | }; | ||
| 151 | |||
| 152 | #endif /* __ASSEMBLY__ */ | ||
| 153 | |||
| 154 | #endif /* _M68KNOMMU_TRAPS_H */ | ||
diff --git a/arch/m68knommu/include/asm/types.h b/arch/m68knommu/include/asm/types.h deleted file mode 100644 index 031238c2d180..000000000000 --- a/arch/m68knommu/include/asm/types.h +++ /dev/null | |||
| @@ -1 +0,0 @@ | |||
| 1 | #include <asm-m68k/types.h> | ||
diff --git a/arch/m68knommu/include/asm/uaccess.h b/arch/m68knommu/include/asm/uaccess.h deleted file mode 100644 index 68bbe9b312f1..000000000000 --- a/arch/m68knommu/include/asm/uaccess.h +++ /dev/null | |||
| @@ -1,181 +0,0 @@ | |||
| 1 | #ifndef __M68KNOMMU_UACCESS_H | ||
| 2 | #define __M68KNOMMU_UACCESS_H | ||
| 3 | |||
| 4 | /* | ||
| 5 | * User space memory access functions | ||
| 6 | */ | ||
| 7 | #include <linux/sched.h> | ||
| 8 | #include <linux/mm.h> | ||
| 9 | #include <linux/string.h> | ||
| 10 | |||
| 11 | #include <asm/segment.h> | ||
| 12 | |||
| 13 | #define VERIFY_READ 0 | ||
| 14 | #define VERIFY_WRITE 1 | ||
| 15 | |||
| 16 | #define access_ok(type,addr,size) _access_ok((unsigned long)(addr),(size)) | ||
| 17 | |||
| 18 | /* | ||
| 19 | * It is not enough to just have access_ok check for a real RAM address. | ||
| 20 | * This would disallow the case of code/ro-data running XIP in flash/rom. | ||
| 21 | * Ideally we would check the possible flash ranges too, but that is | ||
| 22 | * currently not so easy. | ||
| 23 | */ | ||
| 24 | static inline int _access_ok(unsigned long addr, unsigned long size) | ||
| 25 | { | ||
| 26 | return 1; | ||
| 27 | } | ||
| 28 | |||
| 29 | /* | ||
| 30 | * The exception table consists of pairs of addresses: the first is the | ||
| 31 | * address of an instruction that is allowed to fault, and the second is | ||
| 32 | * the address at which the program should continue. No registers are | ||
| 33 | * modified, so it is entirely up to the continuation code to figure out | ||
| 34 | * what to do. | ||
| 35 | * | ||
| 36 | * All the routines below use bits of fixup code that are out of line | ||
| 37 | * with the main instruction path. This means when everything is well, | ||
| 38 | * we don't even have to jump over them. Further, they do not intrude | ||
| 39 | * on our cache or tlb entries. | ||
| 40 | */ | ||
| 41 | |||
| 42 | struct exception_table_entry | ||
| 43 | { | ||
| 44 | unsigned long insn, fixup; | ||
| 45 | }; | ||
| 46 | |||
| 47 | /* Returns 0 if exception not found and fixup otherwise. */ | ||
| 48 | extern unsigned long search_exception_table(unsigned long); | ||
| 49 | |||
| 50 | |||
| 51 | /* | ||
| 52 | * These are the main single-value transfer routines. They automatically | ||
| 53 | * use the right size if we just have the right pointer type. | ||
| 54 | */ | ||
| 55 | |||
| 56 | #define put_user(x, ptr) \ | ||
| 57 | ({ \ | ||
| 58 | int __pu_err = 0; \ | ||
| 59 | typeof(*(ptr)) __pu_val = (x); \ | ||
| 60 | switch (sizeof (*(ptr))) { \ | ||
| 61 | case 1: \ | ||
| 62 | __put_user_asm(__pu_err, __pu_val, ptr, b); \ | ||
| 63 | break; \ | ||
| 64 | case 2: \ | ||
| 65 | __put_user_asm(__pu_err, __pu_val, ptr, w); \ | ||
| 66 | break; \ | ||
| 67 | case 4: \ | ||
| 68 | __put_user_asm(__pu_err, __pu_val, ptr, l); \ | ||
| 69 | break; \ | ||
| 70 | case 8: \ | ||
| 71 | memcpy(ptr, &__pu_val, sizeof (*(ptr))); \ | ||
| 72 | break; \ | ||
| 73 | default: \ | ||
| 74 | __pu_err = __put_user_bad(); \ | ||
| 75 | break; \ | ||
| 76 | } \ | ||
| 77 | __pu_err; \ | ||
| 78 | }) | ||
| 79 | #define __put_user(x, ptr) put_user(x, ptr) | ||
| 80 | |||
| 81 | extern int __put_user_bad(void); | ||
| 82 | |||
| 83 | /* | ||
| 84 | * Tell gcc we read from memory instead of writing: this is because | ||
| 85 | * we do not write to any memory gcc knows about, so there are no | ||
| 86 | * aliasing issues. | ||
| 87 | */ | ||
| 88 | |||
| 89 | #define __ptr(x) ((unsigned long *)(x)) | ||
| 90 | |||
| 91 | #define __put_user_asm(err,x,ptr,bwl) \ | ||
| 92 | __asm__ ("move" #bwl " %0,%1" \ | ||
| 93 | : /* no outputs */ \ | ||
| 94 | :"d" (x),"m" (*__ptr(ptr)) : "memory") | ||
| 95 | |||
| 96 | #define get_user(x, ptr) \ | ||
| 97 | ({ \ | ||
| 98 | int __gu_err = 0; \ | ||
| 99 | typeof(x) __gu_val = 0; \ | ||
| 100 | switch (sizeof(*(ptr))) { \ | ||
| 101 | case 1: \ | ||
| 102 | __get_user_asm(__gu_err, __gu_val, ptr, b, "=d"); \ | ||
| 103 | break; \ | ||
| 104 | case 2: \ | ||
| 105 | __get_user_asm(__gu_err, __gu_val, ptr, w, "=r"); \ | ||
| 106 | break; \ | ||
| 107 | case 4: \ | ||
| 108 | __get_user_asm(__gu_err, __gu_val, ptr, l, "=r"); \ | ||
| 109 | break; \ | ||
| 110 | case 8: \ | ||
| 111 | memcpy((void *) &__gu_val, ptr, sizeof (*(ptr))); \ | ||
| 112 | break; \ | ||
| 113 | default: \ | ||
| 114 | __gu_val = 0; \ | ||
| 115 | __gu_err = __get_user_bad(); \ | ||
| 116 | break; \ | ||
| 117 | } \ | ||
| 118 | (x) = (typeof(*(ptr))) __gu_val; \ | ||
| 119 | __gu_err; \ | ||
| 120 | }) | ||
| 121 | #define __get_user(x, ptr) get_user(x, ptr) | ||
| 122 | |||
| 123 | extern int __get_user_bad(void); | ||
| 124 | |||
| 125 | #define __get_user_asm(err,x,ptr,bwl,reg) \ | ||
| 126 | __asm__ ("move" #bwl " %1,%0" \ | ||
| 127 | : "=d" (x) \ | ||
| 128 | : "m" (*__ptr(ptr))) | ||
| 129 | |||
| 130 | #define copy_from_user(to, from, n) (memcpy(to, from, n), 0) | ||
| 131 | #define copy_to_user(to, from, n) (memcpy(to, from, n), 0) | ||
| 132 | |||
| 133 | #define __copy_from_user(to, from, n) copy_from_user(to, from, n) | ||
| 134 | #define __copy_to_user(to, from, n) copy_to_user(to, from, n) | ||
| 135 | #define __copy_to_user_inatomic __copy_to_user | ||
| 136 | #define __copy_from_user_inatomic __copy_from_user | ||
| 137 | |||
| 138 | #define copy_to_user_ret(to,from,n,retval) ({ if (copy_to_user(to,from,n)) return retval; }) | ||
| 139 | |||
| 140 | #define copy_from_user_ret(to,from,n,retval) ({ if (copy_from_user(to,from,n)) return retval; }) | ||
| 141 | |||
| 142 | /* | ||
| 143 | * Copy a null terminated string from userspace. | ||
| 144 | */ | ||
| 145 | |||
| 146 | static inline long | ||
| 147 | strncpy_from_user(char *dst, const char *src, long count) | ||
| 148 | { | ||
| 149 | char *tmp; | ||
| 150 | strncpy(dst, src, count); | ||
| 151 | for (tmp = dst; *tmp && count > 0; tmp++, count--) | ||
| 152 | ; | ||
| 153 | return(tmp - dst); /* DAVIDM should we count a NUL ? check getname */ | ||
| 154 | } | ||
| 155 | |||
| 156 | /* | ||
| 157 | * Return the size of a string (including the ending 0) | ||
| 158 | * | ||
| 159 | * Return 0 on exception, a value greater than N if too long | ||
| 160 | */ | ||
| 161 | static inline long strnlen_user(const char *src, long n) | ||
| 162 | { | ||
| 163 | return(strlen(src) + 1); /* DAVIDM make safer */ | ||
| 164 | } | ||
| 165 | |||
| 166 | #define strlen_user(str) strnlen_user(str, 32767) | ||
| 167 | |||
| 168 | /* | ||
| 169 | * Zero Userspace | ||
| 170 | */ | ||
| 171 | |||
| 172 | static inline unsigned long | ||
| 173 | __clear_user(void *to, unsigned long n) | ||
| 174 | { | ||
| 175 | memset(to, 0, n); | ||
| 176 | return 0; | ||
| 177 | } | ||
| 178 | |||
| 179 | #define clear_user(to,n) __clear_user(to,n) | ||
| 180 | |||
| 181 | #endif /* _M68KNOMMU_UACCESS_H */ | ||
diff --git a/arch/m68knommu/include/asm/ucontext.h b/arch/m68knommu/include/asm/ucontext.h deleted file mode 100644 index 713a27f901cd..000000000000 --- a/arch/m68knommu/include/asm/ucontext.h +++ /dev/null | |||
| @@ -1,32 +0,0 @@ | |||
| 1 | #ifndef _M68KNOMMU_UCONTEXT_H | ||
| 2 | #define _M68KNOMMU_UCONTEXT_H | ||
| 3 | |||
| 4 | typedef int greg_t; | ||
| 5 | #define NGREG 18 | ||
| 6 | typedef greg_t gregset_t[NGREG]; | ||
| 7 | |||
| 8 | typedef struct fpregset { | ||
| 9 | int f_pcr; | ||
| 10 | int f_psr; | ||
| 11 | int f_fpiaddr; | ||
| 12 | int f_fpregs[8][3]; | ||
| 13 | } fpregset_t; | ||
| 14 | |||
| 15 | struct mcontext { | ||
| 16 | int version; | ||
| 17 | gregset_t gregs; | ||
| 18 | fpregset_t fpregs; | ||
| 19 | }; | ||
| 20 | |||
| 21 | #define MCONTEXT_VERSION 2 | ||
| 22 | |||
| 23 | struct ucontext { | ||
| 24 | unsigned long uc_flags; | ||
| 25 | struct ucontext *uc_link; | ||
| 26 | stack_t uc_stack; | ||
| 27 | struct mcontext uc_mcontext; | ||
| 28 | unsigned long uc_filler[80]; | ||
| 29 | sigset_t uc_sigmask; /* mask last for extensibility */ | ||
| 30 | }; | ||
| 31 | |||
| 32 | #endif | ||
diff --git a/arch/m68knommu/include/asm/unaligned.h b/arch/m68knommu/include/asm/unaligned.h deleted file mode 100644 index eb1ea4cb9a59..000000000000 --- a/arch/m68knommu/include/asm/unaligned.h +++ /dev/null | |||
| @@ -1,25 +0,0 @@ | |||
| 1 | #ifndef _ASM_M68KNOMMU_UNALIGNED_H | ||
| 2 | #define _ASM_M68KNOMMU_UNALIGNED_H | ||
| 3 | |||
| 4 | |||
| 5 | #ifdef CONFIG_COLDFIRE | ||
| 6 | #include <linux/unaligned/be_struct.h> | ||
| 7 | #include <linux/unaligned/le_byteshift.h> | ||
| 8 | #include <linux/unaligned/generic.h> | ||
| 9 | |||
| 10 | #define get_unaligned __get_unaligned_be | ||
| 11 | #define put_unaligned __put_unaligned_be | ||
| 12 | |||
| 13 | #else | ||
| 14 | /* | ||
| 15 | * The m68k can do unaligned accesses itself. | ||
| 16 | */ | ||
| 17 | #include <linux/unaligned/access_ok.h> | ||
| 18 | #include <linux/unaligned/generic.h> | ||
| 19 | |||
| 20 | #define get_unaligned __get_unaligned_be | ||
| 21 | #define put_unaligned __put_unaligned_be | ||
| 22 | |||
| 23 | #endif | ||
| 24 | |||
| 25 | #endif /* _ASM_M68KNOMMU_UNALIGNED_H */ | ||
diff --git a/arch/m68knommu/include/asm/unistd.h b/arch/m68knommu/include/asm/unistd.h deleted file mode 100644 index b034a2f7b444..000000000000 --- a/arch/m68knommu/include/asm/unistd.h +++ /dev/null | |||
| @@ -1,372 +0,0 @@ | |||
| 1 | #ifndef _ASM_M68K_UNISTD_H_ | ||
| 2 | #define _ASM_M68K_UNISTD_H_ | ||
| 3 | |||
| 4 | /* | ||
| 5 | * This file contains the system call numbers. | ||
| 6 | */ | ||
| 7 | |||
| 8 | #define __NR_restart_syscall 0 | ||
| 9 | #define __NR_exit 1 | ||
| 10 | #define __NR_fork 2 | ||
| 11 | #define __NR_read 3 | ||
| 12 | #define __NR_write 4 | ||
| 13 | #define __NR_open 5 | ||
| 14 | #define __NR_close 6 | ||
| 15 | #define __NR_waitpid 7 | ||
| 16 | #define __NR_creat 8 | ||
| 17 | #define __NR_link 9 | ||
| 18 | #define __NR_unlink 10 | ||
| 19 | #define __NR_execve 11 | ||
| 20 | #define __NR_chdir 12 | ||
| 21 | #define __NR_time 13 | ||
| 22 | #define __NR_mknod 14 | ||
| 23 | #define __NR_chmod 15 | ||
| 24 | #define __NR_chown 16 | ||
| 25 | #define __NR_break 17 | ||
| 26 | #define __NR_oldstat 18 | ||
| 27 | #define __NR_lseek 19 | ||
| 28 | #define __NR_getpid 20 | ||
| 29 | #define __NR_mount 21 | ||
| 30 | #define __NR_umount 22 | ||
| 31 | #define __NR_setuid 23 | ||
| 32 | #define __NR_getuid 24 | ||
| 33 | #define __NR_stime 25 | ||
| 34 | #define __NR_ptrace 26 | ||
| 35 | #define __NR_alarm 27 | ||
| 36 | #define __NR_oldfstat 28 | ||
| 37 | #define __NR_pause 29 | ||
| 38 | #define __NR_utime 30 | ||
| 39 | #define __NR_stty 31 | ||
| 40 | #define __NR_gtty 32 | ||
| 41 | #define __NR_access 33 | ||
| 42 | #define __NR_nice 34 | ||
| 43 | #define __NR_ftime 35 | ||
| 44 | #define __NR_sync 36 | ||
| 45 | #define __NR_kill 37 | ||
| 46 | #define __NR_rename 38 | ||
| 47 | #define __NR_mkdir 39 | ||
| 48 | #define __NR_rmdir 40 | ||
| 49 | #define __NR_dup 41 | ||
| 50 | #define __NR_pipe 42 | ||
| 51 | #define __NR_times 43 | ||
| 52 | #define __NR_prof 44 | ||
| 53 | #define __NR_brk 45 | ||
| 54 | #define __NR_setgid 46 | ||
| 55 | #define __NR_getgid 47 | ||
| 56 | #define __NR_signal 48 | ||
| 57 | #define __NR_geteuid 49 | ||
| 58 | #define __NR_getegid 50 | ||
| 59 | #define __NR_acct 51 | ||
| 60 | #define __NR_umount2 52 | ||
| 61 | #define __NR_lock 53 | ||
| 62 | #define __NR_ioctl 54 | ||
| 63 | #define __NR_fcntl 55 | ||
| 64 | #define __NR_mpx 56 | ||
| 65 | #define __NR_setpgid 57 | ||
| 66 | #define __NR_ulimit 58 | ||
| 67 | #define __NR_oldolduname 59 | ||
| 68 | #define __NR_umask 60 | ||
| 69 | #define __NR_chroot 61 | ||
| 70 | #define __NR_ustat 62 | ||
| 71 | #define __NR_dup2 63 | ||
| 72 | #define __NR_getppid 64 | ||
| 73 | #define __NR_getpgrp 65 | ||
| 74 | #define __NR_setsid 66 | ||
| 75 | #define __NR_sigaction 67 | ||
| 76 | #define __NR_sgetmask 68 | ||
| 77 | #define __NR_ssetmask 69 | ||
| 78 | #define __NR_setreuid 70 | ||
| 79 | #define __NR_setregid 71 | ||
| 80 | #define __NR_sigsuspend 72 | ||
| 81 | #define __NR_sigpending 73 | ||
| 82 | #define __NR_sethostname 74 | ||
| 83 | #define __NR_setrlimit 75 | ||
| 84 | #define __NR_getrlimit 76 | ||
| 85 | #define __NR_getrusage 77 | ||
| 86 | #define __NR_gettimeofday 78 | ||
| 87 | #define __NR_settimeofday 79 | ||
| 88 | #define __NR_getgroups 80 | ||
| 89 | #define __NR_setgroups 81 | ||
| 90 | #define __NR_select 82 | ||
| 91 | #define __NR_symlink 83 | ||
| 92 | #define __NR_oldlstat 84 | ||
| 93 | #define __NR_readlink 85 | ||
| 94 | #define __NR_uselib 86 | ||
| 95 | #define __NR_swapon 87 | ||
| 96 | #define __NR_reboot 88 | ||
| 97 | #define __NR_readdir 89 | ||
| 98 | #define __NR_mmap 90 | ||
| 99 | #define __NR_munmap 91 | ||
| 100 | #define __NR_truncate 92 | ||
| 101 | #define __NR_ftruncate 93 | ||
| 102 | #define __NR_fchmod 94 | ||
| 103 | #define __NR_fchown 95 | ||
| 104 | #define __NR_getpriority 96 | ||
| 105 | #define __NR_setpriority 97 | ||
| 106 | #define __NR_profil 98 | ||
| 107 | #define __NR_statfs 99 | ||
| 108 | #define __NR_fstatfs 100 | ||
| 109 | #define __NR_ioperm 101 | ||
| 110 | #define __NR_socketcall 102 | ||
| 111 | #define __NR_syslog 103 | ||
| 112 | #define __NR_setitimer 104 | ||
| 113 | #define __NR_getitimer 105 | ||
| 114 | #define __NR_stat 106 | ||
| 115 | #define __NR_lstat 107 | ||
| 116 | #define __NR_fstat 108 | ||
| 117 | #define __NR_olduname 109 | ||
| 118 | #define __NR_iopl /* 110 */ not supported | ||
| 119 | #define __NR_vhangup 111 | ||
| 120 | #define __NR_idle /* 112 */ Obsolete | ||
| 121 | #define __NR_vm86 /* 113 */ not supported | ||
| 122 | #define __NR_wait4 114 | ||
| 123 | #define __NR_swapoff 115 | ||
| 124 | #define __NR_sysinfo 116 | ||
| 125 | #define __NR_ipc 117 | ||
| 126 | #define __NR_fsync 118 | ||
| 127 | #define __NR_sigreturn 119 | ||
| 128 | #define __NR_clone 120 | ||
| 129 | #define __NR_setdomainname 121 | ||
| 130 | #define __NR_uname 122 | ||
| 131 | #define __NR_cacheflush 123 | ||
| 132 | #define __NR_adjtimex 124 | ||
| 133 | #define __NR_mprotect 125 | ||
| 134 | #define __NR_sigprocmask 126 | ||
| 135 | #define __NR_create_module 127 | ||
| 136 | #define __NR_init_module 128 | ||
| 137 | #define __NR_delete_module 129 | ||
| 138 | #define __NR_get_kernel_syms 130 | ||
| 139 | #define __NR_quotactl 131 | ||
| 140 | #define __NR_getpgid 132 | ||
| 141 | #define __NR_fchdir 133 | ||
| 142 | #define __NR_bdflush 134 | ||
| 143 | #define __NR_sysfs 135 | ||
| 144 | #define __NR_personality 136 | ||
| 145 | #define __NR_afs_syscall 137 /* Syscall for Andrew File System */ | ||
| 146 | #define __NR_setfsuid 138 | ||
| 147 | #define __NR_setfsgid 139 | ||
| 148 | #define __NR__llseek 140 | ||
| 149 | #define __NR_getdents 141 | ||
| 150 | #define __NR__newselect 142 | ||
| 151 | #define __NR_flock 143 | ||
| 152 | #define __NR_msync 144 | ||
| 153 | #define __NR_readv 145 | ||
| 154 | #define __NR_writev 146 | ||
| 155 | #define __NR_getsid 147 | ||
| 156 | #define __NR_fdatasync 148 | ||
| 157 | #define __NR__sysctl 149 | ||
| 158 | #define __NR_mlock 150 | ||
| 159 | #define __NR_munlock 151 | ||
| 160 | #define __NR_mlockall 152 | ||
| 161 | #define __NR_munlockall 153 | ||
| 162 | #define __NR_sched_setparam 154 | ||
| 163 | #define __NR_sched_getparam 155 | ||
| 164 | #define __NR_sched_setscheduler 156 | ||
| 165 | #define __NR_sched_getscheduler 157 | ||
| 166 | #define __NR_sched_yield 158 | ||
| 167 | #define __NR_sched_get_priority_max 159 | ||
| 168 | #define __NR_sched_get_priority_min 160 | ||
| 169 | #define __NR_sched_rr_get_interval 161 | ||
| 170 | #define __NR_nanosleep 162 | ||
| 171 | #define __NR_mremap 163 | ||
| 172 | #define __NR_setresuid 164 | ||
| 173 | #define __NR_getresuid 165 | ||
| 174 | #define __NR_getpagesize 166 | ||
| 175 | #define __NR_query_module 167 | ||
| 176 | #define __NR_poll 168 | ||
| 177 | #define __NR_nfsservctl 169 | ||
| 178 | #define __NR_setresgid 170 | ||
| 179 | #define __NR_getresgid 171 | ||
| 180 | #define __NR_prctl 172 | ||
| 181 | #define __NR_rt_sigreturn 173 | ||
| 182 | #define __NR_rt_sigaction 174 | ||
| 183 | #define __NR_rt_sigprocmask 175 | ||
| 184 | #define __NR_rt_sigpending 176 | ||
| 185 | #define __NR_rt_sigtimedwait 177 | ||
| 186 | #define __NR_rt_sigqueueinfo 178 | ||
| 187 | #define __NR_rt_sigsuspend 179 | ||
| 188 | #define __NR_pread64 180 | ||
| 189 | #define __NR_pwrite64 181 | ||
| 190 | #define __NR_lchown 182 | ||
| 191 | #define __NR_getcwd 183 | ||
| 192 | #define __NR_capget 184 | ||
| 193 | #define __NR_capset 185 | ||
| 194 | #define __NR_sigaltstack 186 | ||
| 195 | #define __NR_sendfile 187 | ||
| 196 | #define __NR_getpmsg 188 /* some people actually want streams */ | ||
| 197 | #define __NR_putpmsg 189 /* some people actually want streams */ | ||
| 198 | #define __NR_vfork 190 | ||
| 199 | #define __NR_ugetrlimit 191 | ||
| 200 | #define __NR_mmap2 192 | ||
| 201 | #define __NR_truncate64 193 | ||
| 202 | #define __NR_ftruncate64 194 | ||
| 203 | #define __NR_stat64 195 | ||
| 204 | #define __NR_lstat64 196 | ||
| 205 | #define __NR_fstat64 197 | ||
| 206 | #define __NR_chown32 198 | ||
| 207 | #define __NR_getuid32 199 | ||
| 208 | #define __NR_getgid32 200 | ||
| 209 | #define __NR_geteuid32 201 | ||
| 210 | #define __NR_getegid32 202 | ||
| 211 | #define __NR_setreuid32 203 | ||
| 212 | #define __NR_setregid32 204 | ||
| 213 | #define __NR_getgroups32 205 | ||
| 214 | #define __NR_setgroups32 206 | ||
| 215 | #define __NR_fchown32 207 | ||
| 216 | #define __NR_setresuid32 208 | ||
| 217 | #define __NR_getresuid32 209 | ||
| 218 | #define __NR_setresgid32 210 | ||
| 219 | #define __NR_getresgid32 211 | ||
| 220 | #define __NR_lchown32 212 | ||
| 221 | #define __NR_setuid32 213 | ||
| 222 | #define __NR_setgid32 214 | ||
| 223 | #define __NR_setfsuid32 215 | ||
| 224 | #define __NR_setfsgid32 216 | ||
| 225 | #define __NR_pivot_root 217 | ||
| 226 | #define __NR_getdents64 220 | ||
| 227 | #define __NR_gettid 221 | ||
| 228 | #define __NR_tkill 222 | ||
| 229 | #define __NR_setxattr 223 | ||
| 230 | #define __NR_lsetxattr 224 | ||
| 231 | #define __NR_fsetxattr 225 | ||
| 232 | #define __NR_getxattr 226 | ||
| 233 | #define __NR_lgetxattr 227 | ||
| 234 | #define __NR_fgetxattr 228 | ||
| 235 | #define __NR_listxattr 229 | ||
| 236 | #define __NR_llistxattr 230 | ||
| 237 | #define __NR_flistxattr 231 | ||
| 238 | #define __NR_removexattr 232 | ||
| 239 | #define __NR_lremovexattr 233 | ||
| 240 | #define __NR_fremovexattr 234 | ||
| 241 | #define __NR_futex 235 | ||
| 242 | #define __NR_sendfile64 236 | ||
| 243 | #define __NR_mincore 237 | ||
| 244 | #define __NR_madvise 238 | ||
| 245 | #define __NR_fcntl64 239 | ||
| 246 | #define __NR_readahead 240 | ||
| 247 | #define __NR_io_setup 241 | ||
| 248 | #define __NR_io_destroy 242 | ||
| 249 | #define __NR_io_getevents 243 | ||
| 250 | #define __NR_io_submit 244 | ||
| 251 | #define __NR_io_cancel 245 | ||
| 252 | #define __NR_fadvise64 246 | ||
| 253 | #define __NR_exit_group 247 | ||
| 254 | #define __NR_lookup_dcookie 248 | ||
| 255 | #define __NR_epoll_create 249 | ||
| 256 | #define __NR_epoll_ctl 250 | ||
| 257 | #define __NR_epoll_wait 251 | ||
| 258 | #define __NR_remap_file_pages 252 | ||
| 259 | #define __NR_set_tid_address 253 | ||
| 260 | #define __NR_timer_create 254 | ||
| 261 | #define __NR_timer_settime 255 | ||
| 262 | #define __NR_timer_gettime 256 | ||
| 263 | #define __NR_timer_getoverrun 257 | ||
| 264 | #define __NR_timer_delete 258 | ||
| 265 | #define __NR_clock_settime 259 | ||
| 266 | #define __NR_clock_gettime 260 | ||
| 267 | #define __NR_clock_getres 261 | ||
| 268 | #define __NR_clock_nanosleep 262 | ||
| 269 | #define __NR_statfs64 263 | ||
| 270 | #define __NR_fstatfs64 264 | ||
| 271 | #define __NR_tgkill 265 | ||
| 272 | #define __NR_utimes 266 | ||
| 273 | #define __NR_fadvise64_64 267 | ||
| 274 | #define __NR_mbind 268 | ||
| 275 | #define __NR_get_mempolicy 269 | ||
| 276 | #define __NR_set_mempolicy 270 | ||
| 277 | #define __NR_mq_open 271 | ||
| 278 | #define __NR_mq_unlink 272 | ||
| 279 | #define __NR_mq_timedsend 273 | ||
| 280 | #define __NR_mq_timedreceive 274 | ||
| 281 | #define __NR_mq_notify 275 | ||
| 282 | #define __NR_mq_getsetattr 276 | ||
| 283 | #define __NR_waitid 277 | ||
| 284 | #define __NR_vserver 278 | ||
| 285 | #define __NR_add_key 279 | ||
| 286 | #define __NR_request_key 280 | ||
| 287 | #define __NR_keyctl 281 | ||
| 288 | #define __NR_ioprio_set 282 | ||
| 289 | #define __NR_ioprio_get 283 | ||
| 290 | #define __NR_inotify_init 284 | ||
| 291 | #define __NR_inotify_add_watch 285 | ||
| 292 | #define __NR_inotify_rm_watch 286 | ||
| 293 | #define __NR_migrate_pages 287 | ||
| 294 | #define __NR_openat 288 | ||
| 295 | #define __NR_mkdirat 289 | ||
| 296 | #define __NR_mknodat 290 | ||
| 297 | #define __NR_fchownat 291 | ||
| 298 | #define __NR_futimesat 292 | ||
| 299 | #define __NR_fstatat64 293 | ||
| 300 | #define __NR_unlinkat 294 | ||
| 301 | #define __NR_renameat 295 | ||
| 302 | #define __NR_linkat 296 | ||
| 303 | #define __NR_symlinkat 297 | ||
| 304 | #define __NR_readlinkat 298 | ||
| 305 | #define __NR_fchmodat 299 | ||
| 306 | #define __NR_faccessat 300 | ||
| 307 | #define __NR_pselect6 301 | ||
| 308 | #define __NR_ppoll 302 | ||
| 309 | #define __NR_unshare 303 | ||
| 310 | #define __NR_set_robust_list 304 | ||
| 311 | #define __NR_get_robust_list 305 | ||
| 312 | #define __NR_splice 306 | ||
| 313 | #define __NR_sync_file_range 307 | ||
| 314 | #define __NR_tee 308 | ||
| 315 | #define __NR_vmsplice 309 | ||
| 316 | #define __NR_move_pages 310 | ||
| 317 | #define __NR_sched_setaffinity 311 | ||
| 318 | #define __NR_sched_getaffinity 312 | ||
| 319 | #define __NR_kexec_load 313 | ||
| 320 | #define __NR_getcpu 314 | ||
| 321 | #define __NR_epoll_pwait 315 | ||
| 322 | #define __NR_utimensat 316 | ||
| 323 | #define __NR_signalfd 317 | ||
| 324 | #define __NR_timerfd_create 318 | ||
| 325 | #define __NR_eventfd 319 | ||
| 326 | #define __NR_fallocate 320 | ||
| 327 | #define __NR_timerfd_settime 321 | ||
| 328 | #define __NR_timerfd_gettime 322 | ||
| 329 | #define __NR_signalfd4 323 | ||
| 330 | #define __NR_eventfd2 324 | ||
| 331 | #define __NR_epoll_create1 325 | ||
| 332 | #define __NR_dup3 326 | ||
| 333 | #define __NR_pipe2 327 | ||
| 334 | #define __NR_inotify_init1 328 | ||
| 335 | |||
| 336 | #ifdef __KERNEL__ | ||
| 337 | |||
| 338 | #define NR_syscalls 329 | ||
| 339 | |||
| 340 | #define __ARCH_WANT_IPC_PARSE_VERSION | ||
| 341 | #define __ARCH_WANT_OLD_READDIR | ||
| 342 | #define __ARCH_WANT_OLD_STAT | ||
| 343 | #define __ARCH_WANT_STAT64 | ||
| 344 | #define __ARCH_WANT_SYS_ALARM | ||
| 345 | #define __ARCH_WANT_SYS_GETHOSTNAME | ||
| 346 | #define __ARCH_WANT_SYS_PAUSE | ||
| 347 | #define __ARCH_WANT_SYS_SGETMASK | ||
| 348 | #define __ARCH_WANT_SYS_SIGNAL | ||
| 349 | #define __ARCH_WANT_SYS_TIME | ||
| 350 | #define __ARCH_WANT_SYS_UTIME | ||
| 351 | #define __ARCH_WANT_SYS_WAITPID | ||
| 352 | #define __ARCH_WANT_SYS_SOCKETCALL | ||
| 353 | #define __ARCH_WANT_SYS_FADVISE64 | ||
| 354 | #define __ARCH_WANT_SYS_GETPGRP | ||
| 355 | #define __ARCH_WANT_SYS_LLSEEK | ||
| 356 | #define __ARCH_WANT_SYS_NICE | ||
| 357 | #define __ARCH_WANT_SYS_OLD_GETRLIMIT | ||
| 358 | #define __ARCH_WANT_SYS_OLDUMOUNT | ||
| 359 | #define __ARCH_WANT_SYS_SIGPENDING | ||
| 360 | #define __ARCH_WANT_SYS_SIGPROCMASK | ||
| 361 | #define __ARCH_WANT_SYS_RT_SIGACTION | ||
| 362 | |||
| 363 | /* | ||
| 364 | * "Conditional" syscalls | ||
| 365 | * | ||
| 366 | * What we want is __attribute__((weak,alias("sys_ni_syscall"))), | ||
| 367 | * but it doesn't work on all toolchains, so we just do it by hand | ||
| 368 | */ | ||
| 369 | #define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall") | ||
| 370 | |||
| 371 | #endif /* __KERNEL__ */ | ||
| 372 | #endif /* _ASM_M68K_UNISTD_H_ */ | ||
diff --git a/arch/m68knommu/include/asm/user.h b/arch/m68knommu/include/asm/user.h deleted file mode 100644 index a5a555b761c4..000000000000 --- a/arch/m68knommu/include/asm/user.h +++ /dev/null | |||
| @@ -1 +0,0 @@ | |||
| 1 | #include <asm-m68k/user.h> | ||