1 files changed, 348 insertions, 0 deletions

diff --git a/arch/m68knommu/kernel/vmlinux.lds.S b/arch/m68knommu/kernel/vmlinux.lds.S
new file mode 100644
index 000000000000..31cb12892da5
--- /dev/null
+++ b/arch/m68knommu/kernel/vmlinux.lds.S
@@ -0,0 +1,348 @@
+/*
+ *      vmlinux.lds.S -- master linker script for m68knommu arch
+ *
+ *      (C) Copyright 2002-2004, Greg Ungerer <gerg@snapgear.com>
+ *
+ *      This ends up looking compilcated, because of the number of
+ *      address variations for ram and rom/flash layouts. The real
+ *      work of the linker script is all at the end, and reasonably
+ *      strait forward.
+ */
+
+#include <linux/config.h>
+#include <asm-generic/vmlinux.lds.h>
+
+/*
+ *      Original Palm pilot (same for Xcopilot).
+ *      There is really only a rom target for this.
+ */
+#ifdef CONFIG_PILOT3
+#define ROMVEC_START    0x10c00000
+#define ROMVEC_LENGTH   0x10400
+#define ROM_START       0x10c10400
+#define ROM_LENGTH      0xfec00
+#define ROM_END         0x10d00000
+#define RAMVEC_START    0x00000000
+#define RAMVEC_LENGTH   0x400
+#define RAM_START       0x10000400
+#define RAM_LENGTH      0xffc00
+#define RAM_END         0x10100000
+#define _ramend _ram_end_notused
+#define DATA_ADDR       RAM_START
+#endif
+
+/*
+ *      Same setup on both the uCsimm and uCdimm.
+ */
+#if defined(CONFIG_UCSIMM) || defined(CONFIG_UCDIMM)
+#ifdef CONFIG_RAMKERNEL
+#define ROMVEC_START    0x10c10000
+#define ROMVEC_LENGTH   0x400
+#define ROM_START       0x10c10400
+#define ROM_LENGTH      0x1efc00
+#define ROM_END         0x10e00000
+#define RAMVEC_START    0x00000000
+#define RAMVEC_LENGTH   0x400
+#define RAM_START       0x00020400
+#define RAM_LENGTH      0x7dfc00
+#define RAM_END         0x00800000
+#endif
+#ifdef CONFIG_ROMKERNEL
+#define ROMVEC_START    0x10c10000
+#define ROMVEC_LENGTH   0x400
+#define ROM_START       0x10c10400
+#define ROM_LENGTH      0x1efc00
+#define ROM_END         0x10e00000
+#define RAMVEC_START    0x00000000
+#define RAMVEC_LENGTH   0x400
+#define RAM_START       0x00020000
+#define RAM_LENGTH      0x600000
+#define RAM_END         0x00800000
+#endif
+#ifdef CONFIG_HIMEMKERNEL
+#define ROMVEC_START    0x00600000
+#define ROMVEC_LENGTH   0x400
+#define ROM_START       0x00600400
+#define ROM_LENGTH      0x1efc00
+#define ROM_END         0x007f0000
+#define RAMVEC_START    0x00000000
+#define RAMVEC_LENGTH   0x400
+#define RAM_START       0x00020000
+#define RAM_LENGTH      0x5e0000
+#define RAM_END         0x00600000
+#endif
+#endif
+
+#ifdef CONFIG_DRAGEN2
+#define RAM_START       0x10000
+#define RAM_LENGTH      0x7f0000
+#endif
+
+#ifdef CONFIG_UCQUICC
+#define ROMVEC_START    0x00000000
+#define ROMVEC_LENGTH   0x404
+#define ROM_START       0x00000404
+#define ROM_LENGTH      0x1ff6fc
+#define ROM_END         0x00200000
+#define RAMVEC_START    0x00200000
+#define RAMVEC_LENGTH   0x404
+#define RAM_START       0x00200404
+#define RAM_LENGTH      0x1ff6fc
+#define RAM_END         0x00400000
+#endif
+
+/*
+ *      The standard Arnewsh 5206 board only has 1MiB of ram. Not normally
+ *      enough to be useful. Assume the user has fitted something larger,
+ *      at least 4MiB in size. No point in not letting the kernel completely
+ *      link, it will be obvious if it is too big when they go to load it.
+ */
+#if defined(CONFIG_ARN5206)
+#define RAM_START       0x10000
+#define RAM_LENGTH      0x3f0000
+#endif
+
+/*
+ *      The Motorola 5206eLITE board only has 1MiB of static RAM.
+ */
+#if defined(CONFIG_ELITE)
+#define RAM_START       0x30020000
+#define RAM_END         0xe0000
+#endif
+
+/*
+ *      All the Motorola eval boards have the same basic arrangement.
+ *      The end of RAM will vary depending on how much ram is fitted,
+ *      but this isn't important here, we assume at least 4MiB.
+ */
+#if defined(CONFIG_M5206eC3) || defined(CONFIG_M5249C3) || \
+    defined(CONFIG_M5272C3) || defined(CONFIG_M5307C3) || \
+    defined(CONFIG_ARN5307) || defined(CONFIG_M5407C3) || \
+    defined(CONFIG_M5271EVB) || defined(CONFIG_M5275EVB)
+#define RAM_START       0x20000
+#define RAM_LENGTH      0x3e0000
+#endif
+
+/*
+ *      The senTec COBRA5272 board has nearly the same memory layout as 
+ *      the M5272C3. We assume 16MiB ram.
+ */
+#if defined(CONFIG_COBRA5272)
+#define RAM_START   0x20000
+#define RAM_LENGTH  0xfe0000
+#endif
+
+#if defined(CONFIG_M5282EVB)
+#define RAM_START       0x10000
+#define RAM_LENGTH      0x3f0000
+#endif
+
+/*
+ *      The senTec COBRA5282 board has the same memory layout as the M5282EVB.
+ */
+#if defined(CONFIG_COBRA5282)
+#define  RAM_START   0x10000
+#define  RAM_LENGTH  0x3f0000
+#endif
+
+/*
+ *      These flash boot boards use all of ram for operation. Again the
+ *      actual memory size is not important here, assume at least 4MiB.
+ *      They currently have no support for running in flash.
+ */
+#if defined(CONFIG_NETtel) || defined(CONFIG_eLIA) || \
+    defined(CONFIG_DISKtel) || defined(CONFIG_SECUREEDGEMP3) || \
+    defined(CONFIG_HW_FEITH)
+#define RAM_START       0x400
+#define RAM_LENGTH      0x3ffc00
+#endif
+
+/*
+ *      Sneha Boards mimimun memmory
+ *      The end of RAM will vary depending on how much ram is fitted,
+ *      but this isn't important here, we assume at least 4MiB.
+ */
+#if defined(CONFIG_CPU16B)   
+#define RAM_START       0x20000
+#define RAM_LENGTH      0x3e0000
+#endif
+
+
+#if defined(CONFIG_RAMKERNEL)
+#define TEXT            ram
+#define DATA            ram
+#define INIT            ram
+#define BSS             ram
+#endif
+#if defined(CONFIG_ROMKERNEL) || defined(CONFIG_HIMEMKERNEL)
+#define TEXT            rom
+#define DATA            ram
+#define INIT            ram
+#define BSS             ram
+#endif
+
+#ifndef DATA_ADDR
+#define DATA_ADDR
+#endif
+
+
+OUTPUT_ARCH(m68k)
+ENTRY(_start)
+
+MEMORY {
+#ifdef RAMVEC_START
+        ramvec  : ORIGIN = RAMVEC_START, LENGTH = RAMVEC_LENGTH
+#endif
+        ram     : ORIGIN = RAM_START, LENGTH = RAM_LENGTH
+#ifdef RAM_END
+        eram    : ORIGIN = RAM_END, LENGTH = 0
+#endif
+#ifdef ROM_START
+        romvec  : ORIGIN = ROMVEC_START, LENGTH = ROMVEC_LENGTH
+        rom     : ORIGIN = ROM_START, LENGTH = ROM_LENGTH
+        erom    : ORIGIN = ROM_END, LENGTH = 0
+#endif
+}
+
+jiffies = jiffies_64 + 4;
+
+SECTIONS {
+
+#ifdef ROMVEC_START
+        . = ROMVEC_START ;
+        .romvec : {
+                __rom_start = . ;
+                _romvec = .;
+                *(.data.initvect)
+        } > romvec
+#endif
+
+        .text : {
+                _stext = . ;
+                *(.text)
+                SCHED_TEXT
+                *(.text.lock)
+
+                . = ALIGN(16);          /* Exception table              */
+                __start___ex_table = .;
+                *(__ex_table)
+                __stop___ex_table = .;
+
+                *(.rodata) *(.rodata.*)
+                *(__vermagic)           /* Kernel version magic */
+                *(.rodata1)
+                *(.rodata.str1.1)
+
+                /* Kernel symbol table: Normal symbols */
+                . = ALIGN(4);
+                __start___ksymtab = .;
+                *(__ksymtab)
+                __stop___ksymtab = .;
+
+                /* Kernel symbol table: GPL-only symbols */
+                __start___ksymtab_gpl = .;
+                *(__ksymtab_gpl)
+                __stop___ksymtab_gpl = .;
+
+                /* Kernel symbol table: Normal symbols */
+                __start___kcrctab = .;
+                *(__kcrctab)
+                __stop___kcrctab = .;
+
+                /* Kernel symbol table: GPL-only symbols */
+                __start___kcrctab_gpl = .;
+                *(__kcrctab_gpl)
+                __stop___kcrctab_gpl = .;
+
+                /* Kernel symbol table: strings */
+                *(__ksymtab_strings)
+
+                /* Built-in module parameters */
+                __start___param = .;
+                *(__param)
+                __stop___param = .;
+
+                . = ALIGN(4) ;
+                _etext = . ;
+        } > TEXT
+
+#ifdef ROM_END
+        . = ROM_END ;
+        .erom : {
+                __rom_end = . ;
+        } > erom
+#endif
+#ifdef RAMVEC_START
+        . = RAMVEC_START ;
+        .ramvec : {
+                __ramvec = .;
+        } > ramvec
+#endif
+
+        .data DATA_ADDR : {
+                . = ALIGN(4);
+                _sdata = . ;
+                *(.data)
+                . = ALIGN(8192) ;
+                *(.data.init_task)
+                _edata = . ;
+        } > DATA
+
+        .init : {
+                . = ALIGN(4096);
+                __init_begin = .;
+                _sinittext = .;
+                *(.init.text)
+                _einittext = .;
+                *(.init.data)
+                . = ALIGN(16);
+                __setup_start = .;
+                *(.init.setup)
+                __setup_end = .;
+                __initcall_start = .;
+                *(.initcall1.init)
+                *(.initcall2.init)
+                *(.initcall3.init)
+                *(.initcall4.init)
+                *(.initcall5.init)
+                *(.initcall6.init)
+                *(.initcall7.init)
+                __initcall_end = .;
+                __con_initcall_start = .;
+                *(.con_initcall.init)
+                __con_initcall_end = .;
+                __security_initcall_start = .;
+                *(.security_initcall.init)
+                __security_initcall_end = .;
+                . = ALIGN(4);
+                __initramfs_start = .;
+                *(.init.ramfs)
+                __initramfs_end = .;
+                . = ALIGN(4096);
+                __init_end = .;
+        } > INIT
+
+        /DISCARD/ : {
+                *(.exit.text)
+                *(.exit.data)
+                *(.exitcall.exit)
+        }
+
+        .bss : {
+                . = ALIGN(4);
+                _sbss = . ;
+                *(.bss)
+                *(COMMON)
+                . = ALIGN(4) ;
+                _ebss = . ;
+        } > BSS
+
+#ifdef RAM_END
+        . = RAM_END ;
+        .eram : {
+                __ramend = . ;
+                _ramend = . ;
+        } > eram
+#endif
+}
+