aboutsummaryrefslogtreecommitdiffstats
path: root/arch/m68knommu/include/asm/MC68328.h
diff options
context:
space:
mode:
Diffstat (limited to 'arch/m68knommu/include/asm/MC68328.h')
-rw-r--r--arch/m68knommu/include/asm/MC68328.h1266
1 files changed, 0 insertions, 1266 deletions
diff --git a/arch/m68knommu/include/asm/MC68328.h b/arch/m68knommu/include/asm/MC68328.h
deleted file mode 100644
index a337e56d09bf..000000000000
--- a/arch/m68knommu/include/asm/MC68328.h
+++ /dev/null
@@ -1,1266 +0,0 @@
1
2/* include/asm-m68knommu/MC68328.h: '328 control registers
3 *
4 * Copyright (C) 1999 Vladimir Gurevich <vgurevic@cisco.com>
5 * Bear & Hare Software, Inc.
6 *
7 * Based on include/asm-m68knommu/MC68332.h
8 * Copyright (C) 1998 Kenneth Albanowski <kjahds@kjahds.com>,
9 *
10 */
11
12#ifndef _MC68328_H_
13#define _MC68328_H_
14
15#define BYTE_REF(addr) (*((volatile unsigned char*)addr))
16#define WORD_REF(addr) (*((volatile unsigned short*)addr))
17#define LONG_REF(addr) (*((volatile unsigned long*)addr))
18
19#define PUT_FIELD(field, val) (((val) << field##_SHIFT) & field##_MASK)
20#define GET_FIELD(reg, field) (((reg) & field##_MASK) >> field##_SHIFT)
21
22/**********
23 *
24 * 0xFFFFF0xx -- System Control
25 *
26 **********/
27
28/*
29 * System Control Register (SCR)
30 */
31#define SCR_ADDR 0xfffff000
32#define SCR BYTE_REF(SCR_ADDR)
33
34#define SCR_WDTH8 0x01 /* 8-Bit Width Select */
35#define SCR_DMAP 0x04 /* Double Map */
36#define SCR_SO 0x08 /* Supervisor Only */
37#define SCR_BETEN 0x10 /* Bus-Error Time-Out Enable */
38#define SCR_PRV 0x20 /* Privilege Violation */
39#define SCR_WPV 0x40 /* Write Protect Violation */
40#define SCR_BETO 0x80 /* Bus-Error TimeOut */
41
42/*
43 * Mask Revision Register
44 */
45#define MRR_ADDR 0xfffff004
46#define MRR LONG_REF(MRR_ADDR)
47
48/**********
49 *
50 * 0xFFFFF1xx -- Chip-Select logic
51 *
52 **********/
53
54/**********
55 *
56 * 0xFFFFF2xx -- Phase Locked Loop (PLL) & Power Control
57 *
58 **********/
59
60/*
61 * Group Base Address Registers
62 */
63#define GRPBASEA_ADDR 0xfffff100
64#define GRPBASEB_ADDR 0xfffff102
65#define GRPBASEC_ADDR 0xfffff104
66#define GRPBASED_ADDR 0xfffff106
67
68#define GRPBASEA WORD_REF(GRPBASEA_ADDR)
69#define GRPBASEB WORD_REF(GRPBASEB_ADDR)
70#define GRPBASEC WORD_REF(GRPBASEC_ADDR)
71#define GRPBASED WORD_REF(GRPBASED_ADDR)
72
73#define GRPBASE_V 0x0001 /* Valid */
74#define GRPBASE_GBA_MASK 0xfff0 /* Group Base Address (bits 31-20) */
75
76/*
77 * Group Base Address Mask Registers
78 */
79#define GRPMASKA_ADDR 0xfffff108
80#define GRPMASKB_ADDR 0xfffff10a
81#define GRPMASKC_ADDR 0xfffff10c
82#define GRPMASKD_ADDR 0xfffff10e
83
84#define GRPMASKA WORD_REF(GRPMASKA_ADDR)
85#define GRPMASKB WORD_REF(GRPMASKB_ADDR)
86#define GRPMASKC WORD_REF(GRPMASKC_ADDR)
87#define GRPMASKD WORD_REF(GRPMASKD_ADDR)
88
89#define GRMMASK_GMA_MASK 0xfffff0 /* Group Base Mask (bits 31-20) */
90
91/*
92 * Chip-Select Option Registers (group A)
93 */
94#define CSA0_ADDR 0xfffff110
95#define CSA1_ADDR 0xfffff114
96#define CSA2_ADDR 0xfffff118
97#define CSA3_ADDR 0xfffff11c
98
99#define CSA0 LONG_REF(CSA0_ADDR)
100#define CSA1 LONG_REF(CSA1_ADDR)
101#define CSA2 LONG_REF(CSA2_ADDR)
102#define CSA3 LONG_REF(CSA3_ADDR)
103
104#define CSA_WAIT_MASK 0x00000007 /* Wait State Selection */
105#define CSA_WAIT_SHIFT 0
106#define CSA_RO 0x00000008 /* Read-Only */
107#define CSA_AM_MASK 0x0000ff00 /* Address Mask (bits 23-16) */
108#define CSA_AM_SHIFT 8
109#define CSA_BUSW 0x00010000 /* Bus Width Select */
110#define CSA_AC_MASK 0xff000000 /* Address Compare (bits 23-16) */
111#define CSA_AC_SHIFT 24
112
113/*
114 * Chip-Select Option Registers (group B)
115 */
116#define CSB0_ADDR 0xfffff120
117#define CSB1_ADDR 0xfffff124
118#define CSB2_ADDR 0xfffff128
119#define CSB3_ADDR 0xfffff12c
120
121#define CSB0 LONG_REF(CSB0_ADDR)
122#define CSB1 LONG_REF(CSB1_ADDR)
123#define CSB2 LONG_REF(CSB2_ADDR)
124#define CSB3 LONG_REF(CSB3_ADDR)
125
126#define CSB_WAIT_MASK 0x00000007 /* Wait State Selection */
127#define CSB_WAIT_SHIFT 0
128#define CSB_RO 0x00000008 /* Read-Only */
129#define CSB_AM_MASK 0x0000ff00 /* Address Mask (bits 23-16) */
130#define CSB_AM_SHIFT 8
131#define CSB_BUSW 0x00010000 /* Bus Width Select */
132#define CSB_AC_MASK 0xff000000 /* Address Compare (bits 23-16) */
133#define CSB_AC_SHIFT 24
134
135/*
136 * Chip-Select Option Registers (group C)
137 */
138#define CSC0_ADDR 0xfffff130
139#define CSC1_ADDR 0xfffff134
140#define CSC2_ADDR 0xfffff138
141#define CSC3_ADDR 0xfffff13c
142
143#define CSC0 LONG_REF(CSC0_ADDR)
144#define CSC1 LONG_REF(CSC1_ADDR)
145#define CSC2 LONG_REF(CSC2_ADDR)
146#define CSC3 LONG_REF(CSC3_ADDR)
147
148#define CSC_WAIT_MASK 0x00000007 /* Wait State Selection */
149#define CSC_WAIT_SHIFT 0
150#define CSC_RO 0x00000008 /* Read-Only */
151#define CSC_AM_MASK 0x0000fff0 /* Address Mask (bits 23-12) */
152#define CSC_AM_SHIFT 4
153#define CSC_BUSW 0x00010000 /* Bus Width Select */
154#define CSC_AC_MASK 0xfff00000 /* Address Compare (bits 23-12) */
155#define CSC_AC_SHIFT 20
156
157/*
158 * Chip-Select Option Registers (group D)
159 */
160#define CSD0_ADDR 0xfffff140
161#define CSD1_ADDR 0xfffff144
162#define CSD2_ADDR 0xfffff148
163#define CSD3_ADDR 0xfffff14c
164
165#define CSD0 LONG_REF(CSD0_ADDR)
166#define CSD1 LONG_REF(CSD1_ADDR)
167#define CSD2 LONG_REF(CSD2_ADDR)
168#define CSD3 LONG_REF(CSD3_ADDR)
169
170#define CSD_WAIT_MASK 0x00000007 /* Wait State Selection */
171#define CSD_WAIT_SHIFT 0
172#define CSD_RO 0x00000008 /* Read-Only */
173#define CSD_AM_MASK 0x0000fff0 /* Address Mask (bits 23-12) */
174#define CSD_AM_SHIFT 4
175#define CSD_BUSW 0x00010000 /* Bus Width Select */
176#define CSD_AC_MASK 0xfff00000 /* Address Compare (bits 23-12) */
177#define CSD_AC_SHIFT 20
178
179/**********
180 *
181 * 0xFFFFF2xx -- Phase Locked Loop (PLL) & Power Control
182 *
183 **********/
184
185/*
186 * PLL Control Register
187 */
188#define PLLCR_ADDR 0xfffff200
189#define PLLCR WORD_REF(PLLCR_ADDR)
190
191#define PLLCR_DISPLL 0x0008 /* Disable PLL */
192#define PLLCR_CLKEN 0x0010 /* Clock (CLKO pin) enable */
193#define PLLCR_SYSCLK_SEL_MASK 0x0700 /* System Clock Selection */
194#define PLLCR_SYSCLK_SEL_SHIFT 8
195#define PLLCR_PIXCLK_SEL_MASK 0x3800 /* LCD Clock Selection */
196#define PLLCR_PIXCLK_SEL_SHIFT 11
197
198/* 'EZ328-compatible definitions */
199#define PLLCR_LCDCLK_SEL_MASK PLLCR_PIXCLK_SEL_MASK
200#define PLLCR_LCDCLK_SEL_SHIFT PLLCR_PIXCLK_SEL_SHIFT
201
202/*
203 * PLL Frequency Select Register
204 */
205#define PLLFSR_ADDR 0xfffff202
206#define PLLFSR WORD_REF(PLLFSR_ADDR)
207
208#define PLLFSR_PC_MASK 0x00ff /* P Count */
209#define PLLFSR_PC_SHIFT 0
210#define PLLFSR_QC_MASK 0x0f00 /* Q Count */
211#define PLLFSR_QC_SHIFT 8
212#define PLLFSR_PROT 0x4000 /* Protect P & Q */
213#define PLLFSR_CLK32 0x8000 /* Clock 32 (kHz) */
214
215/*
216 * Power Control Register
217 */
218#define PCTRL_ADDR 0xfffff207
219#define PCTRL BYTE_REF(PCTRL_ADDR)
220
221#define PCTRL_WIDTH_MASK 0x1f /* CPU Clock bursts width */
222#define PCTRL_WIDTH_SHIFT 0
223#define PCTRL_STOP 0x40 /* Enter power-save mode immediately */
224#define PCTRL_PCEN 0x80 /* Power Control Enable */
225
226/**********
227 *
228 * 0xFFFFF3xx -- Interrupt Controller
229 *
230 **********/
231
232/*
233 * Interrupt Vector Register
234 */
235#define IVR_ADDR 0xfffff300
236#define IVR BYTE_REF(IVR_ADDR)
237
238#define IVR_VECTOR_MASK 0xF8
239
240/*
241 * Interrupt control Register
242 */
243#define ICR_ADRR 0xfffff302
244#define ICR WORD_REF(ICR_ADDR)
245
246#define ICR_ET6 0x0100 /* Edge Trigger Select for IRQ6 */
247#define ICR_ET3 0x0200 /* Edge Trigger Select for IRQ3 */
248#define ICR_ET2 0x0400 /* Edge Trigger Select for IRQ2 */
249#define ICR_ET1 0x0800 /* Edge Trigger Select for IRQ1 */
250#define ICR_POL6 0x1000 /* Polarity Control for IRQ6 */
251#define ICR_POL3 0x2000 /* Polarity Control for IRQ3 */
252#define ICR_POL2 0x4000 /* Polarity Control for IRQ2 */
253#define ICR_POL1 0x8000 /* Polarity Control for IRQ1 */
254
255/*
256 * Interrupt Mask Register
257 */
258#define IMR_ADDR 0xfffff304
259#define IMR LONG_REF(IMR_ADDR)
260
261/*
262 * Define the names for bit positions first. This is useful for
263 * request_irq
264 */
265#define SPIM_IRQ_NUM 0 /* SPI Master interrupt */
266#define TMR2_IRQ_NUM 1 /* Timer 2 interrupt */
267#define UART_IRQ_NUM 2 /* UART interrupt */
268#define WDT_IRQ_NUM 3 /* Watchdog Timer interrupt */
269#define RTC_IRQ_NUM 4 /* RTC interrupt */
270#define KB_IRQ_NUM 6 /* Keyboard Interrupt */
271#define PWM_IRQ_NUM 7 /* Pulse-Width Modulator int. */
272#define INT0_IRQ_NUM 8 /* External INT0 */
273#define INT1_IRQ_NUM 9 /* External INT1 */
274#define INT2_IRQ_NUM 10 /* External INT2 */
275#define INT3_IRQ_NUM 11 /* External INT3 */
276#define INT4_IRQ_NUM 12 /* External INT4 */
277#define INT5_IRQ_NUM 13 /* External INT5 */
278#define INT6_IRQ_NUM 14 /* External INT6 */
279#define INT7_IRQ_NUM 15 /* External INT7 */
280#define IRQ1_IRQ_NUM 16 /* IRQ1 */
281#define IRQ2_IRQ_NUM 17 /* IRQ2 */
282#define IRQ3_IRQ_NUM 18 /* IRQ3 */
283#define IRQ6_IRQ_NUM 19 /* IRQ6 */
284#define PEN_IRQ_NUM 20 /* Pen Interrupt */
285#define SPIS_IRQ_NUM 21 /* SPI Slave Interrupt */
286#define TMR1_IRQ_NUM 22 /* Timer 1 interrupt */
287#define IRQ7_IRQ_NUM 23 /* IRQ7 */
288
289/* '328-compatible definitions */
290#define SPI_IRQ_NUM SPIM_IRQ_NUM
291#define TMR_IRQ_NUM TMR1_IRQ_NUM
292
293/*
294 * Here go the bitmasks themselves
295 */
296#define IMR_MSPIM (1 << SPIM _IRQ_NUM) /* Mask SPI Master interrupt */
297#define IMR_MTMR2 (1 << TMR2_IRQ_NUM) /* Mask Timer 2 interrupt */
298#define IMR_MUART (1 << UART_IRQ_NUM) /* Mask UART interrupt */
299#define IMR_MWDT (1 << WDT_IRQ_NUM) /* Mask Watchdog Timer interrupt */
300#define IMR_MRTC (1 << RTC_IRQ_NUM) /* Mask RTC interrupt */
301#define IMR_MKB (1 << KB_IRQ_NUM) /* Mask Keyboard Interrupt */
302#define IMR_MPWM (1 << PWM_IRQ_NUM) /* Mask Pulse-Width Modulator int. */
303#define IMR_MINT0 (1 << INT0_IRQ_NUM) /* Mask External INT0 */
304#define IMR_MINT1 (1 << INT1_IRQ_NUM) /* Mask External INT1 */
305#define IMR_MINT2 (1 << INT2_IRQ_NUM) /* Mask External INT2 */
306#define IMR_MINT3 (1 << INT3_IRQ_NUM) /* Mask External INT3 */
307#define IMR_MINT4 (1 << INT4_IRQ_NUM) /* Mask External INT4 */
308#define IMR_MINT5 (1 << INT5_IRQ_NUM) /* Mask External INT5 */
309#define IMR_MINT6 (1 << INT6_IRQ_NUM) /* Mask External INT6 */
310#define IMR_MINT7 (1 << INT7_IRQ_NUM) /* Mask External INT7 */
311#define IMR_MIRQ1 (1 << IRQ1_IRQ_NUM) /* Mask IRQ1 */
312#define IMR_MIRQ2 (1 << IRQ2_IRQ_NUM) /* Mask IRQ2 */
313#define IMR_MIRQ3 (1 << IRQ3_IRQ_NUM) /* Mask IRQ3 */
314#define IMR_MIRQ6 (1 << IRQ6_IRQ_NUM) /* Mask IRQ6 */
315#define IMR_MPEN (1 << PEN_IRQ_NUM) /* Mask Pen Interrupt */
316#define IMR_MSPIS (1 << SPIS_IRQ_NUM) /* Mask SPI Slave Interrupt */
317#define IMR_MTMR1 (1 << TMR1_IRQ_NUM) /* Mask Timer 1 interrupt */
318#define IMR_MIRQ7 (1 << IRQ7_IRQ_NUM) /* Mask IRQ7 */
319
320/* 'EZ328-compatible definitions */
321#define IMR_MSPI IMR_MSPIM
322#define IMR_MTMR IMR_MTMR1
323
324/*
325 * Interrupt Wake-Up Enable Register
326 */
327#define IWR_ADDR 0xfffff308
328#define IWR LONG_REF(IWR_ADDR)
329
330#define IWR_SPIM (1 << SPIM _IRQ_NUM) /* SPI Master interrupt */
331#define IWR_TMR2 (1 << TMR2_IRQ_NUM) /* Timer 2 interrupt */
332#define IWR_UART (1 << UART_IRQ_NUM) /* UART interrupt */
333#define IWR_WDT (1 << WDT_IRQ_NUM) /* Watchdog Timer interrupt */
334#define IWR_RTC (1 << RTC_IRQ_NUM) /* RTC interrupt */
335#define IWR_KB (1 << KB_IRQ_NUM) /* Keyboard Interrupt */
336#define IWR_PWM (1 << PWM_IRQ_NUM) /* Pulse-Width Modulator int. */
337#define IWR_INT0 (1 << INT0_IRQ_NUM) /* External INT0 */
338#define IWR_INT1 (1 << INT1_IRQ_NUM) /* External INT1 */
339#define IWR_INT2 (1 << INT2_IRQ_NUM) /* External INT2 */
340#define IWR_INT3 (1 << INT3_IRQ_NUM) /* External INT3 */
341#define IWR_INT4 (1 << INT4_IRQ_NUM) /* External INT4 */
342#define IWR_INT5 (1 << INT5_IRQ_NUM) /* External INT5 */
343#define IWR_INT6 (1 << INT6_IRQ_NUM) /* External INT6 */
344#define IWR_INT7 (1 << INT7_IRQ_NUM) /* External INT7 */
345#define IWR_IRQ1 (1 << IRQ1_IRQ_NUM) /* IRQ1 */
346#define IWR_IRQ2 (1 << IRQ2_IRQ_NUM) /* IRQ2 */
347#define IWR_IRQ3 (1 << IRQ3_IRQ_NUM) /* IRQ3 */
348#define IWR_IRQ6 (1 << IRQ6_IRQ_NUM) /* IRQ6 */
349#define IWR_PEN (1 << PEN_IRQ_NUM) /* Pen Interrupt */
350#define IWR_SPIS (1 << SPIS_IRQ_NUM) /* SPI Slave Interrupt */
351#define IWR_TMR1 (1 << TMR1_IRQ_NUM) /* Timer 1 interrupt */
352#define IWR_IRQ7 (1 << IRQ7_IRQ_NUM) /* IRQ7 */
353
354/*
355 * Interrupt Status Register
356 */
357#define ISR_ADDR 0xfffff30c
358#define ISR LONG_REF(ISR_ADDR)
359
360#define ISR_SPIM (1 << SPIM _IRQ_NUM) /* SPI Master interrupt */
361#define ISR_TMR2 (1 << TMR2_IRQ_NUM) /* Timer 2 interrupt */
362#define ISR_UART (1 << UART_IRQ_NUM) /* UART interrupt */
363#define ISR_WDT (1 << WDT_IRQ_NUM) /* Watchdog Timer interrupt */
364#define ISR_RTC (1 << RTC_IRQ_NUM) /* RTC interrupt */
365#define ISR_KB (1 << KB_IRQ_NUM) /* Keyboard Interrupt */
366#define ISR_PWM (1 << PWM_IRQ_NUM) /* Pulse-Width Modulator int. */
367#define ISR_INT0 (1 << INT0_IRQ_NUM) /* External INT0 */
368#define ISR_INT1 (1 << INT1_IRQ_NUM) /* External INT1 */
369#define ISR_INT2 (1 << INT2_IRQ_NUM) /* External INT2 */
370#define ISR_INT3 (1 << INT3_IRQ_NUM) /* External INT3 */
371#define ISR_INT4 (1 << INT4_IRQ_NUM) /* External INT4 */
372#define ISR_INT5 (1 << INT5_IRQ_NUM) /* External INT5 */
373#define ISR_INT6 (1 << INT6_IRQ_NUM) /* External INT6 */
374#define ISR_INT7 (1 << INT7_IRQ_NUM) /* External INT7 */
375#define ISR_IRQ1 (1 << IRQ1_IRQ_NUM) /* IRQ1 */
376#define ISR_IRQ2 (1 << IRQ2_IRQ_NUM) /* IRQ2 */
377#define ISR_IRQ3 (1 << IRQ3_IRQ_NUM) /* IRQ3 */
378#define ISR_IRQ6 (1 << IRQ6_IRQ_NUM) /* IRQ6 */
379#define ISR_PEN (1 << PEN_IRQ_NUM) /* Pen Interrupt */
380#define ISR_SPIS (1 << SPIS_IRQ_NUM) /* SPI Slave Interrupt */
381#define ISR_TMR1 (1 << TMR1_IRQ_NUM) /* Timer 1 interrupt */
382#define ISR_IRQ7 (1 << IRQ7_IRQ_NUM) /* IRQ7 */
383
384/* 'EZ328-compatible definitions */
385#define ISR_SPI ISR_SPIM
386#define ISR_TMR ISR_TMR1
387
388/*
389 * Interrupt Pending Register
390 */
391#define IPR_ADDR 0xfffff310
392#define IPR LONG_REF(IPR_ADDR)
393
394#define IPR_SPIM (1 << SPIM _IRQ_NUM) /* SPI Master interrupt */
395#define IPR_TMR2 (1 << TMR2_IRQ_NUM) /* Timer 2 interrupt */
396#define IPR_UART (1 << UART_IRQ_NUM) /* UART interrupt */
397#define IPR_WDT (1 << WDT_IRQ_NUM) /* Watchdog Timer interrupt */
398#define IPR_RTC (1 << RTC_IRQ_NUM) /* RTC interrupt */
399#define IPR_KB (1 << KB_IRQ_NUM) /* Keyboard Interrupt */
400#define IPR_PWM (1 << PWM_IRQ_NUM) /* Pulse-Width Modulator int. */
401#define IPR_INT0 (1 << INT0_IRQ_NUM) /* External INT0 */
402#define IPR_INT1 (1 << INT1_IRQ_NUM) /* External INT1 */
403#define IPR_INT2 (1 << INT2_IRQ_NUM) /* External INT2 */
404#define IPR_INT3 (1 << INT3_IRQ_NUM) /* External INT3 */
405#define IPR_INT4 (1 << INT4_IRQ_NUM) /* External INT4 */
406#define IPR_INT5 (1 << INT5_IRQ_NUM) /* External INT5 */
407#define IPR_INT6 (1 << INT6_IRQ_NUM) /* External INT6 */
408#define IPR_INT7 (1 << INT7_IRQ_NUM) /* External INT7 */
409#define IPR_IRQ1 (1 << IRQ1_IRQ_NUM) /* IRQ1 */
410#define IPR_IRQ2 (1 << IRQ2_IRQ_NUM) /* IRQ2 */
411#define IPR_IRQ3 (1 << IRQ3_IRQ_NUM) /* IRQ3 */
412#define IPR_IRQ6 (1 << IRQ6_IRQ_NUM) /* IRQ6 */
413#define IPR_PEN (1 << PEN_IRQ_NUM) /* Pen Interrupt */
414#define IPR_SPIS (1 << SPIS_IRQ_NUM) /* SPI Slave Interrupt */
415#define IPR_TMR1 (1 << TMR1_IRQ_NUM) /* Timer 1 interrupt */
416#define IPR_IRQ7 (1 << IRQ7_IRQ_NUM) /* IRQ7 */
417
418/* 'EZ328-compatible definitions */
419#define IPR_SPI IPR_SPIM
420#define IPR_TMR IPR_TMR1
421
422/**********
423 *
424 * 0xFFFFF4xx -- Parallel Ports
425 *
426 **********/
427
428/*
429 * Port A
430 */
431#define PADIR_ADDR 0xfffff400 /* Port A direction reg */
432#define PADATA_ADDR 0xfffff401 /* Port A data register */
433#define PASEL_ADDR 0xfffff403 /* Port A Select register */
434
435#define PADIR BYTE_REF(PADIR_ADDR)
436#define PADATA BYTE_REF(PADATA_ADDR)
437#define PASEL BYTE_REF(PASEL_ADDR)
438
439#define PA(x) (1 << (x))
440#define PA_A(x) PA((x) - 16) /* This is specific to PA only! */
441
442#define PA_A16 PA(0) /* Use A16 as PA(0) */
443#define PA_A17 PA(1) /* Use A17 as PA(1) */
444#define PA_A18 PA(2) /* Use A18 as PA(2) */
445#define PA_A19 PA(3) /* Use A19 as PA(3) */
446#define PA_A20 PA(4) /* Use A20 as PA(4) */
447#define PA_A21 PA(5) /* Use A21 as PA(5) */
448#define PA_A22 PA(6) /* Use A22 as PA(6) */
449#define PA_A23 PA(7) /* Use A23 as PA(7) */
450
451/*
452 * Port B
453 */
454#define PBDIR_ADDR 0xfffff408 /* Port B direction reg */
455#define PBDATA_ADDR 0xfffff409 /* Port B data register */
456#define PBSEL_ADDR 0xfffff40b /* Port B Select Register */
457
458#define PBDIR BYTE_REF(PBDIR_ADDR)
459#define PBDATA BYTE_REF(PBDATA_ADDR)
460#define PBSEL BYTE_REF(PBSEL_ADDR)
461
462#define PB(x) (1 << (x))
463#define PB_D(x) PB(x) /* This is specific to port B only */
464
465#define PB_D0 PB(0) /* Use D0 as PB(0) */
466#define PB_D1 PB(1) /* Use D1 as PB(1) */
467#define PB_D2 PB(2) /* Use D2 as PB(2) */
468#define PB_D3 PB(3) /* Use D3 as PB(3) */
469#define PB_D4 PB(4) /* Use D4 as PB(4) */
470#define PB_D5 PB(5) /* Use D5 as PB(5) */
471#define PB_D6 PB(6) /* Use D6 as PB(6) */
472#define PB_D7 PB(7) /* Use D7 as PB(7) */
473
474/*
475 * Port C
476 */
477#define PCDIR_ADDR 0xfffff410 /* Port C direction reg */
478#define PCDATA_ADDR 0xfffff411 /* Port C data register */
479#define PCSEL_ADDR 0xfffff413 /* Port C Select Register */
480
481#define PCDIR BYTE_REF(PCDIR_ADDR)
482#define PCDATA BYTE_REF(PCDATA_ADDR)
483#define PCSEL BYTE_REF(PCSEL_ADDR)
484
485#define PC(x) (1 << (x))
486
487#define PC_WE PC(6) /* Use WE as PC(6) */
488#define PC_DTACK PC(5) /* Use DTACK as PC(5) */
489#define PC_IRQ7 PC(4) /* Use IRQ7 as PC(4) */
490#define PC_LDS PC(2) /* Use LDS as PC(2) */
491#define PC_UDS PC(1) /* Use UDS as PC(1) */
492#define PC_MOCLK PC(0) /* Use MOCLK as PC(0) */
493
494/*
495 * Port D
496 */
497#define PDDIR_ADDR 0xfffff418 /* Port D direction reg */
498#define PDDATA_ADDR 0xfffff419 /* Port D data register */
499#define PDPUEN_ADDR 0xfffff41a /* Port D Pull-Up enable reg */
500#define PDPOL_ADDR 0xfffff41c /* Port D Polarity Register */
501#define PDIRQEN_ADDR 0xfffff41d /* Port D IRQ enable register */
502#define PDIQEG_ADDR 0xfffff41f /* Port D IRQ Edge Register */
503
504#define PDDIR BYTE_REF(PDDIR_ADDR)
505#define PDDATA BYTE_REF(PDDATA_ADDR)
506#define PDPUEN BYTE_REF(PDPUEN_ADDR)
507#define PDPOL BYTE_REF(PDPOL_ADDR)
508#define PDIRQEN BYTE_REF(PDIRQEN_ADDR)
509#define PDIQEG BYTE_REF(PDIQEG_ADDR)
510
511#define PD(x) (1 << (x))
512#define PD_KB(x) PD(x) /* This is specific for Port D only */
513
514#define PD_KB0 PD(0) /* Use KB0 as PD(0) */
515#define PD_KB1 PD(1) /* Use KB1 as PD(1) */
516#define PD_KB2 PD(2) /* Use KB2 as PD(2) */
517#define PD_KB3 PD(3) /* Use KB3 as PD(3) */
518#define PD_KB4 PD(4) /* Use KB4 as PD(4) */
519#define PD_KB5 PD(5) /* Use KB5 as PD(5) */
520#define PD_KB6 PD(6) /* Use KB6 as PD(6) */
521#define PD_KB7 PD(7) /* Use KB7 as PD(7) */
522
523/*
524 * Port E
525 */
526#define PEDIR_ADDR 0xfffff420 /* Port E direction reg */
527#define PEDATA_ADDR 0xfffff421 /* Port E data register */
528#define PEPUEN_ADDR 0xfffff422 /* Port E Pull-Up enable reg */
529#define PESEL_ADDR 0xfffff423 /* Port E Select Register */
530
531#define PEDIR BYTE_REF(PEDIR_ADDR)
532#define PEDATA BYTE_REF(PEDATA_ADDR)
533#define PEPUEN BYTE_REF(PEPUEN_ADDR)
534#define PESEL BYTE_REF(PESEL_ADDR)
535
536#define PE(x) (1 << (x))
537
538#define PE_CSA1 PE(1) /* Use CSA1 as PE(1) */
539#define PE_CSA2 PE(2) /* Use CSA2 as PE(2) */
540#define PE_CSA3 PE(3) /* Use CSA3 as PE(3) */
541#define PE_CSB0 PE(4) /* Use CSB0 as PE(4) */
542#define PE_CSB1 PE(5) /* Use CSB1 as PE(5) */
543#define PE_CSB2 PE(6) /* Use CSB2 as PE(6) */
544#define PE_CSB3 PE(7) /* Use CSB3 as PE(7) */
545
546/*
547 * Port F
548 */
549#define PFDIR_ADDR 0xfffff428 /* Port F direction reg */
550#define PFDATA_ADDR 0xfffff429 /* Port F data register */
551#define PFPUEN_ADDR 0xfffff42a /* Port F Pull-Up enable reg */
552#define PFSEL_ADDR 0xfffff42b /* Port F Select Register */
553
554#define PFDIR BYTE_REF(PFDIR_ADDR)
555#define PFDATA BYTE_REF(PFDATA_ADDR)
556#define PFPUEN BYTE_REF(PFPUEN_ADDR)
557#define PFSEL BYTE_REF(PFSEL_ADDR)
558
559#define PF(x) (1 << (x))
560#define PF_A(x) PF((x) - 24) /* This is Port F specific only */
561
562#define PF_A24 PF(0) /* Use A24 as PF(0) */
563#define PF_A25 PF(1) /* Use A25 as PF(1) */
564#define PF_A26 PF(2) /* Use A26 as PF(2) */
565#define PF_A27 PF(3) /* Use A27 as PF(3) */
566#define PF_A28 PF(4) /* Use A28 as PF(4) */
567#define PF_A29 PF(5) /* Use A29 as PF(5) */
568#define PF_A30 PF(6) /* Use A30 as PF(6) */
569#define PF_A31 PF(7) /* Use A31 as PF(7) */
570
571/*
572 * Port G
573 */
574#define PGDIR_ADDR 0xfffff430 /* Port G direction reg */
575#define PGDATA_ADDR 0xfffff431 /* Port G data register */
576#define PGPUEN_ADDR 0xfffff432 /* Port G Pull-Up enable reg */
577#define PGSEL_ADDR 0xfffff433 /* Port G Select Register */
578
579#define PGDIR BYTE_REF(PGDIR_ADDR)
580#define PGDATA BYTE_REF(PGDATA_ADDR)
581#define PGPUEN BYTE_REF(PGPUEN_ADDR)
582#define PGSEL BYTE_REF(PGSEL_ADDR)
583
584#define PG(x) (1 << (x))
585
586#define PG_UART_TXD PG(0) /* Use UART_TXD as PG(0) */
587#define PG_UART_RXD PG(1) /* Use UART_RXD as PG(1) */
588#define PG_PWMOUT PG(2) /* Use PWMOUT as PG(2) */
589#define PG_TOUT2 PG(3) /* Use TOUT2 as PG(3) */
590#define PG_TIN2 PG(4) /* Use TIN2 as PG(4) */
591#define PG_TOUT1 PG(5) /* Use TOUT1 as PG(5) */
592#define PG_TIN1 PG(6) /* Use TIN1 as PG(6) */
593#define PG_RTCOUT PG(7) /* Use RTCOUT as PG(7) */
594
595/*
596 * Port J
597 */
598#define PJDIR_ADDR 0xfffff438 /* Port J direction reg */
599#define PJDATA_ADDR 0xfffff439 /* Port J data register */
600#define PJSEL_ADDR 0xfffff43b /* Port J Select Register */
601
602#define PJDIR BYTE_REF(PJDIR_ADDR)
603#define PJDATA BYTE_REF(PJDATA_ADDR)
604#define PJSEL BYTE_REF(PJSEL_ADDR)
605
606#define PJ(x) (1 << (x))
607
608#define PJ_CSD3 PJ(7) /* Use CSD3 as PJ(7) */
609
610/*
611 * Port K
612 */
613#define PKDIR_ADDR 0xfffff440 /* Port K direction reg */
614#define PKDATA_ADDR 0xfffff441 /* Port K data register */
615#define PKPUEN_ADDR 0xfffff442 /* Port K Pull-Up enable reg */
616#define PKSEL_ADDR 0xfffff443 /* Port K Select Register */
617
618#define PKDIR BYTE_REF(PKDIR_ADDR)
619#define PKDATA BYTE_REF(PKDATA_ADDR)
620#define PKPUEN BYTE_REF(PKPUEN_ADDR)
621#define PKSEL BYTE_REF(PKSEL_ADDR)
622
623#define PK(x) (1 << (x))
624
625/*
626 * Port M
627 */
628#define PMDIR_ADDR 0xfffff438 /* Port M direction reg */
629#define PMDATA_ADDR 0xfffff439 /* Port M data register */
630#define PMPUEN_ADDR 0xfffff43a /* Port M Pull-Up enable reg */
631#define PMSEL_ADDR 0xfffff43b /* Port M Select Register */
632
633#define PMDIR BYTE_REF(PMDIR_ADDR)
634#define PMDATA BYTE_REF(PMDATA_ADDR)
635#define PMPUEN BYTE_REF(PMPUEN_ADDR)
636#define PMSEL BYTE_REF(PMSEL_ADDR)
637
638#define PM(x) (1 << (x))
639
640/**********
641 *
642 * 0xFFFFF5xx -- Pulse-Width Modulator (PWM)
643 *
644 **********/
645
646/*
647 * PWM Control Register
648 */
649#define PWMC_ADDR 0xfffff500
650#define PWMC WORD_REF(PWMC_ADDR)
651
652#define PWMC_CLKSEL_MASK 0x0007 /* Clock Selection */
653#define PWMC_CLKSEL_SHIFT 0
654#define PWMC_PWMEN 0x0010 /* Enable PWM */
655#define PMNC_POL 0x0020 /* PWM Output Bit Polarity */
656#define PWMC_PIN 0x0080 /* Current PWM output pin status */
657#define PWMC_LOAD 0x0100 /* Force a new period */
658#define PWMC_IRQEN 0x4000 /* Interrupt Request Enable */
659#define PWMC_CLKSRC 0x8000 /* Clock Source Select */
660
661/* 'EZ328-compatible definitions */
662#define PWMC_EN PWMC_PWMEN
663
664/*
665 * PWM Period Register
666 */
667#define PWMP_ADDR 0xfffff502
668#define PWMP WORD_REF(PWMP_ADDR)
669
670/*
671 * PWM Width Register
672 */
673#define PWMW_ADDR 0xfffff504
674#define PWMW WORD_REF(PWMW_ADDR)
675
676/*
677 * PWM Counter Register
678 */
679#define PWMCNT_ADDR 0xfffff506
680#define PWMCNT WORD_REF(PWMCNT_ADDR)
681
682/**********
683 *
684 * 0xFFFFF6xx -- General-Purpose Timers
685 *
686 **********/
687
688/*
689 * Timer Unit 1 and 2 Control Registers
690 */
691#define TCTL1_ADDR 0xfffff600
692#define TCTL1 WORD_REF(TCTL1_ADDR)
693#define TCTL2_ADDR 0xfffff60c
694#define TCTL2 WORD_REF(TCTL2_ADDR)
695
696#define TCTL_TEN 0x0001 /* Timer Enable */
697#define TCTL_CLKSOURCE_MASK 0x000e /* Clock Source: */
698#define TCTL_CLKSOURCE_STOP 0x0000 /* Stop count (disabled) */
699#define TCTL_CLKSOURCE_SYSCLK 0x0002 /* SYSCLK to prescaler */
700#define TCTL_CLKSOURCE_SYSCLK_16 0x0004 /* SYSCLK/16 to prescaler */
701#define TCTL_CLKSOURCE_TIN 0x0006 /* TIN to prescaler */
702#define TCTL_CLKSOURCE_32KHZ 0x0008 /* 32kHz clock to prescaler */
703#define TCTL_IRQEN 0x0010 /* IRQ Enable */
704#define TCTL_OM 0x0020 /* Output Mode */
705#define TCTL_CAP_MASK 0x00c0 /* Capture Edge: */
706#define TCTL_CAP_RE 0x0040 /* Capture on rizing edge */
707#define TCTL_CAP_FE 0x0080 /* Capture on falling edge */
708#define TCTL_FRR 0x0010 /* Free-Run Mode */
709
710/* 'EZ328-compatible definitions */
711#define TCTL_ADDR TCTL1_ADDR
712#define TCTL TCTL1
713
714/*
715 * Timer Unit 1 and 2 Prescaler Registers
716 */
717#define TPRER1_ADDR 0xfffff602
718#define TPRER1 WORD_REF(TPRER1_ADDR)
719#define TPRER2_ADDR 0xfffff60e
720#define TPRER2 WORD_REF(TPRER2_ADDR)
721
722/* 'EZ328-compatible definitions */
723#define TPRER_ADDR TPRER1_ADDR
724#define TPRER TPRER1
725
726/*
727 * Timer Unit 1 and 2 Compare Registers
728 */
729#define TCMP1_ADDR 0xfffff604
730#define TCMP1 WORD_REF(TCMP1_ADDR)
731#define TCMP2_ADDR 0xfffff610
732#define TCMP2 WORD_REF(TCMP2_ADDR)
733
734/* 'EZ328-compatible definitions */
735#define TCMP_ADDR TCMP1_ADDR
736#define TCMP TCMP1
737
738/*
739 * Timer Unit 1 and 2 Capture Registers
740 */
741#define TCR1_ADDR 0xfffff606
742#define TCR1 WORD_REF(TCR1_ADDR)
743#define TCR2_ADDR 0xfffff612
744#define TCR2 WORD_REF(TCR2_ADDR)
745
746/* 'EZ328-compatible definitions */
747#define TCR_ADDR TCR1_ADDR
748#define TCR TCR1
749
750/*
751 * Timer Unit 1 and 2 Counter Registers
752 */
753#define TCN1_ADDR 0xfffff608
754#define TCN1 WORD_REF(TCN1_ADDR)
755#define TCN2_ADDR 0xfffff614
756#define TCN2 WORD_REF(TCN2_ADDR)
757
758/* 'EZ328-compatible definitions */
759#define TCN_ADDR TCN1_ADDR
760#define TCN TCN
761
762/*
763 * Timer Unit 1 and 2 Status Registers
764 */
765#define TSTAT1_ADDR 0xfffff60a
766#define TSTAT1 WORD_REF(TSTAT1_ADDR)
767#define TSTAT2_ADDR 0xfffff616
768#define TSTAT2 WORD_REF(TSTAT2_ADDR)
769
770#define TSTAT_COMP 0x0001 /* Compare Event occurred */
771#define TSTAT_CAPT 0x0001 /* Capture Event occurred */
772
773/* 'EZ328-compatible definitions */
774#define TSTAT_ADDR TSTAT1_ADDR
775#define TSTAT TSTAT1
776
777/*
778 * Watchdog Compare Register
779 */
780#define WRR_ADDR 0xfffff61a
781#define WRR WORD_REF(WRR_ADDR)
782
783/*
784 * Watchdog Counter Register
785 */
786#define WCN_ADDR 0xfffff61c
787#define WCN WORD_REF(WCN_ADDR)
788
789/*
790 * Watchdog Control and Status Register
791 */
792#define WCSR_ADDR 0xfffff618
793#define WCSR WORD_REF(WCSR_ADDR)
794
795#define WCSR_WDEN 0x0001 /* Watchdog Enable */
796#define WCSR_FI 0x0002 /* Forced Interrupt (instead of SW reset)*/
797#define WCSR_WRST 0x0004 /* Watchdog Reset */
798
799/**********
800 *
801 * 0xFFFFF7xx -- Serial Periferial Interface Slave (SPIS)
802 *
803 **********/
804
805/*
806 * SPI Slave Register
807 */
808#define SPISR_ADDR 0xfffff700
809#define SPISR WORD_REF(SPISR_ADDR)
810
811#define SPISR_DATA_ADDR 0xfffff701
812#define SPISR_DATA BYTE_REF(SPISR_DATA_ADDR)
813
814#define SPISR_DATA_MASK 0x00ff /* Shifted data from the external device */
815#define SPISR_DATA_SHIFT 0
816#define SPISR_SPISEN 0x0100 /* SPIS module enable */
817#define SPISR_POL 0x0200 /* SPSCLK polarity control */
818#define SPISR_PHA 0x0400 /* Phase relationship between SPSCLK & SPSRxD */
819#define SPISR_OVWR 0x0800 /* Data buffer has been overwritten */
820#define SPISR_DATARDY 0x1000 /* Data ready */
821#define SPISR_ENPOL 0x2000 /* Enable Polarity */
822#define SPISR_IRQEN 0x4000 /* SPIS IRQ Enable */
823#define SPISR_SPISIRQ 0x8000 /* SPIS IRQ posted */
824
825/**********
826 *
827 * 0xFFFFF8xx -- Serial Periferial Interface Master (SPIM)
828 *
829 **********/
830
831/*
832 * SPIM Data Register
833 */
834#define SPIMDATA_ADDR 0xfffff800
835#define SPIMDATA WORD_REF(SPIMDATA_ADDR)
836
837/*
838 * SPIM Control/Status Register
839 */
840#define SPIMCONT_ADDR 0xfffff802
841#define SPIMCONT WORD_REF(SPIMCONT_ADDR)
842
843#define SPIMCONT_BIT_COUNT_MASK 0x000f /* Transfer Length in Bytes */
844#define SPIMCONT_BIT_COUNT_SHIFT 0
845#define SPIMCONT_POL 0x0010 /* SPMCLK Signel Polarity */
846#define SPIMCONT_PHA 0x0020 /* Clock/Data phase relationship */
847#define SPIMCONT_IRQEN 0x0040 /* IRQ Enable */
848#define SPIMCONT_SPIMIRQ 0x0080 /* Interrupt Request */
849#define SPIMCONT_XCH 0x0100 /* Exchange */
850#define SPIMCONT_RSPIMEN 0x0200 /* Enable SPIM */
851#define SPIMCONT_DATA_RATE_MASK 0xe000 /* SPIM Data Rate */
852#define SPIMCONT_DATA_RATE_SHIFT 13
853
854/* 'EZ328-compatible definitions */
855#define SPIMCONT_IRQ SPIMCONT_SPIMIRQ
856#define SPIMCONT_ENABLE SPIMCONT_SPIMEN
857/**********
858 *
859 * 0xFFFFF9xx -- UART
860 *
861 **********/
862
863/*
864 * UART Status/Control Register
865 */
866#define USTCNT_ADDR 0xfffff900
867#define USTCNT WORD_REF(USTCNT_ADDR)
868
869#define USTCNT_TXAVAILEN 0x0001 /* Transmitter Available Int Enable */
870#define USTCNT_TXHALFEN 0x0002 /* Transmitter Half Empty Int Enable */
871#define USTCNT_TXEMPTYEN 0x0004 /* Transmitter Empty Int Enable */
872#define USTCNT_RXREADYEN 0x0008 /* Receiver Ready Interrupt Enable */
873#define USTCNT_RXHALFEN 0x0010 /* Receiver Half-Full Int Enable */
874#define USTCNT_RXFULLEN 0x0020 /* Receiver Full Interrupt Enable */
875#define USTCNT_CTSDELTAEN 0x0040 /* CTS Delta Interrupt Enable */
876#define USTCNT_GPIODELTAEN 0x0080 /* Old Data Interrupt Enable */
877#define USTCNT_8_7 0x0100 /* Eight or seven-bit transmission */
878#define USTCNT_STOP 0x0200 /* Stop bit transmission */
879#define USTCNT_ODD_EVEN 0x0400 /* Odd Parity */
880#define USTCNT_PARITYEN 0x0800 /* Parity Enable */
881#define USTCNT_CLKMODE 0x1000 /* Clock Mode Select */
882#define USTCNT_TXEN 0x2000 /* Transmitter Enable */
883#define USTCNT_RXEN 0x4000 /* Receiver Enable */
884#define USTCNT_UARTEN 0x8000 /* UART Enable */
885
886/* 'EZ328-compatible definitions */
887#define USTCNT_TXAE USTCNT_TXAVAILEN
888#define USTCNT_TXHE USTCNT_TXHALFEN
889#define USTCNT_TXEE USTCNT_TXEMPTYEN
890#define USTCNT_RXRE USTCNT_RXREADYEN
891#define USTCNT_RXHE USTCNT_RXHALFEN
892#define USTCNT_RXFE USTCNT_RXFULLEN
893#define USTCNT_CTSD USTCNT_CTSDELTAEN
894#define USTCNT_ODD USTCNT_ODD_EVEN
895#define USTCNT_PEN USTCNT_PARITYEN
896#define USTCNT_CLKM USTCNT_CLKMODE
897#define USTCNT_UEN USTCNT_UARTEN
898
899/*
900 * UART Baud Control Register
901 */
902#define UBAUD_ADDR 0xfffff902
903#define UBAUD WORD_REF(UBAUD_ADDR)
904
905#define UBAUD_PRESCALER_MASK 0x003f /* Actual divisor is 65 - PRESCALER */
906#define UBAUD_PRESCALER_SHIFT 0
907#define UBAUD_DIVIDE_MASK 0x0700 /* Baud Rate freq. divizor */
908#define UBAUD_DIVIDE_SHIFT 8
909#define UBAUD_BAUD_SRC 0x0800 /* Baud Rate Source */
910#define UBAUD_GPIOSRC 0x1000 /* GPIO source */
911#define UBAUD_GPIODIR 0x2000 /* GPIO Direction */
912#define UBAUD_GPIO 0x4000 /* Current GPIO pin status */
913#define UBAUD_GPIODELTA 0x8000 /* GPIO pin value changed */
914
915/*
916 * UART Receiver Register
917 */
918#define URX_ADDR 0xfffff904
919#define URX WORD_REF(URX_ADDR)
920
921#define URX_RXDATA_ADDR 0xfffff905
922#define URX_RXDATA BYTE_REF(URX_RXDATA_ADDR)
923
924#define URX_RXDATA_MASK 0x00ff /* Received data */
925#define URX_RXDATA_SHIFT 0
926#define URX_PARITY_ERROR 0x0100 /* Parity Error */
927#define URX_BREAK 0x0200 /* Break Detected */
928#define URX_FRAME_ERROR 0x0400 /* Framing Error */
929#define URX_OVRUN 0x0800 /* Serial Overrun */
930#define URX_DATA_READY 0x2000 /* Data Ready (FIFO not empty) */
931#define URX_FIFO_HALF 0x4000 /* FIFO is Half-Full */
932#define URX_FIFO_FULL 0x8000 /* FIFO is Full */
933
934/*
935 * UART Transmitter Register
936 */
937#define UTX_ADDR 0xfffff906
938#define UTX WORD_REF(UTX_ADDR)
939
940#define UTX_TXDATA_ADDR 0xfffff907
941#define UTX_TXDATA BYTE_REF(UTX_TXDATA_ADDR)
942
943#define UTX_TXDATA_MASK 0x00ff /* Data to be transmitted */
944#define UTX_TXDATA_SHIFT 0
945#define UTX_CTS_DELTA 0x0100 /* CTS changed */
946#define UTX_CTS_STATUS 0x0200 /* CTS State */
947#define UTX_IGNORE_CTS 0x0800 /* Ignore CTS */
948#define UTX_SEND_BREAK 0x1000 /* Send a BREAK */
949#define UTX_TX_AVAIL 0x2000 /* Transmit FIFO has a slot available */
950#define UTX_FIFO_HALF 0x4000 /* Transmit FIFO is half empty */
951#define UTX_FIFO_EMPTY 0x8000 /* Transmit FIFO is empty */
952
953/* 'EZ328-compatible definitions */
954#define UTX_CTS_STAT UTX_CTS_STATUS
955#define UTX_NOCTS UTX_IGNORE_CTS
956
957/*
958 * UART Miscellaneous Register
959 */
960#define UMISC_ADDR 0xfffff908
961#define UMISC WORD_REF(UMISC_ADDR)
962
963#define UMISC_TX_POL 0x0004 /* Transmit Polarity */
964#define UMISC_RX_POL 0x0008 /* Receive Polarity */
965#define UMISC_IRDA_LOOP 0x0010 /* IrDA Loopback Enable */
966#define UMISC_IRDA_EN 0x0020 /* Infra-Red Enable */
967#define UMISC_RTS 0x0040 /* Set RTS status */
968#define UMISC_RTSCONT 0x0080 /* Choose RTS control */
969#define UMISC_LOOP 0x1000 /* Serial Loopback Enable */
970#define UMISC_FORCE_PERR 0x2000 /* Force Parity Error */
971#define UMISC_CLKSRC 0x4000 /* Clock Source */
972
973
974/* generalization of uart control registers to support multiple ports: */
975typedef volatile struct {
976 volatile unsigned short int ustcnt;
977 volatile unsigned short int ubaud;
978 union {
979 volatile unsigned short int w;
980 struct {
981 volatile unsigned char status;
982 volatile unsigned char rxdata;
983 } b;
984 } urx;
985 union {
986 volatile unsigned short int w;
987 struct {
988 volatile unsigned char status;
989 volatile unsigned char txdata;
990 } b;
991 } utx;
992 volatile unsigned short int umisc;
993 volatile unsigned short int pad1;
994 volatile unsigned short int pad2;
995 volatile unsigned short int pad3;
996} __attribute__((packed)) m68328_uart;
997
998
999/**********
1000 *
1001 * 0xFFFFFAxx -- LCD Controller
1002 *
1003 **********/
1004
1005/*
1006 * LCD Screen Starting Address Register
1007 */
1008#define LSSA_ADDR 0xfffffa00
1009#define LSSA LONG_REF(LSSA_ADDR)
1010
1011#define LSSA_SSA_MASK 0xfffffffe /* Bit 0 is reserved */
1012
1013/*
1014 * LCD Virtual Page Width Register
1015 */
1016#define LVPW_ADDR 0xfffffa05
1017#define LVPW BYTE_REF(LVPW_ADDR)
1018
1019/*
1020 * LCD Screen Width Register (not compatible with 'EZ328 !!!)
1021 */
1022#define LXMAX_ADDR 0xfffffa08
1023#define LXMAX WORD_REF(LXMAX_ADDR)
1024
1025#define LXMAX_XM_MASK 0x02ff /* Bits 0-3 are reserved */
1026
1027/*
1028 * LCD Screen Height Register
1029 */
1030#define LYMAX_ADDR 0xfffffa0a
1031#define LYMAX WORD_REF(LYMAX_ADDR)
1032
1033#define LYMAX_YM_MASK 0x02ff /* Bits 10-15 are reserved */
1034
1035/*
1036 * LCD Cursor X Position Register
1037 */
1038#define LCXP_ADDR 0xfffffa18
1039#define LCXP WORD_REF(LCXP_ADDR)
1040
1041#define LCXP_CC_MASK 0xc000 /* Cursor Control */
1042#define LCXP_CC_TRAMSPARENT 0x0000
1043#define LCXP_CC_BLACK 0x4000
1044#define LCXP_CC_REVERSED 0x8000
1045#define LCXP_CC_WHITE 0xc000
1046#define LCXP_CXP_MASK 0x02ff /* Cursor X position */
1047
1048/*
1049 * LCD Cursor Y Position Register
1050 */
1051#define LCYP_ADDR 0xfffffa1a
1052#define LCYP WORD_REF(LCYP_ADDR)
1053
1054#define LCYP_CYP_MASK 0x01ff /* Cursor Y Position */
1055
1056/*
1057 * LCD Cursor Width and Heigth Register
1058 */
1059#define LCWCH_ADDR 0xfffffa1c
1060#define LCWCH WORD_REF(LCWCH_ADDR)
1061
1062#define LCWCH_CH_MASK 0x001f /* Cursor Height */
1063#define LCWCH_CH_SHIFT 0
1064#define LCWCH_CW_MASK 0x1f00 /* Cursor Width */
1065#define LCWCH_CW_SHIFT 8
1066
1067/*
1068 * LCD Blink Control Register
1069 */
1070#define LBLKC_ADDR 0xfffffa1f
1071#define LBLKC BYTE_REF(LBLKC_ADDR)
1072
1073#define LBLKC_BD_MASK 0x7f /* Blink Divisor */
1074#define LBLKC_BD_SHIFT 0
1075#define LBLKC_BKEN 0x80 /* Blink Enabled */
1076
1077/*
1078 * LCD Panel Interface Configuration Register
1079 */
1080#define LPICF_ADDR 0xfffffa20
1081#define LPICF BYTE_REF(LPICF_ADDR)
1082
1083#define LPICF_GS_MASK 0x01 /* Gray-Scale Mode */
1084#define LPICF_GS_BW 0x00
1085#define LPICF_GS_GRAY_4 0x01
1086#define LPICF_PBSIZ_MASK 0x06 /* Panel Bus Width */
1087#define LPICF_PBSIZ_1 0x00
1088#define LPICF_PBSIZ_2 0x02
1089#define LPICF_PBSIZ_4 0x04
1090
1091/*
1092 * LCD Polarity Configuration Register
1093 */
1094#define LPOLCF_ADDR 0xfffffa21
1095#define LPOLCF BYTE_REF(LPOLCF_ADDR)
1096
1097#define LPOLCF_PIXPOL 0x01 /* Pixel Polarity */
1098#define LPOLCF_LPPOL 0x02 /* Line Pulse Polarity */
1099#define LPOLCF_FLMPOL 0x04 /* Frame Marker Polarity */
1100#define LPOLCF_LCKPOL 0x08 /* LCD Shift Lock Polarity */
1101
1102/*
1103 * LACD (LCD Alternate Crystal Direction) Rate Control Register
1104 */
1105#define LACDRC_ADDR 0xfffffa23
1106#define LACDRC BYTE_REF(LACDRC_ADDR)
1107
1108#define LACDRC_ACD_MASK 0x0f /* Alternate Crystal Direction Control */
1109#define LACDRC_ACD_SHIFT 0
1110
1111/*
1112 * LCD Pixel Clock Divider Register
1113 */
1114#define LPXCD_ADDR 0xfffffa25
1115#define LPXCD BYTE_REF(LPXCD_ADDR)
1116
1117#define LPXCD_PCD_MASK 0x3f /* Pixel Clock Divider */
1118#define LPXCD_PCD_SHIFT 0
1119
1120/*
1121 * LCD Clocking Control Register
1122 */
1123#define LCKCON_ADDR 0xfffffa27
1124#define LCKCON BYTE_REF(LCKCON_ADDR)
1125
1126#define LCKCON_PCDS 0x01 /* Pixel Clock Divider Source Select */
1127#define LCKCON_DWIDTH 0x02 /* Display Memory Width */
1128#define LCKCON_DWS_MASK 0x3c /* Display Wait-State */
1129#define LCKCON_DWS_SHIFT 2
1130#define LCKCON_DMA16 0x40 /* DMA burst length */
1131#define LCKCON_LCDON 0x80 /* Enable LCD Controller */
1132
1133/* 'EZ328-compatible definitions */
1134#define LCKCON_DW_MASK LCKCON_DWS_MASK
1135#define LCKCON_DW_SHIFT LCKCON_DWS_SHIFT
1136
1137/*
1138 * LCD Last Buffer Address Register
1139 */
1140#define LLBAR_ADDR 0xfffffa29
1141#define LLBAR BYTE_REF(LLBAR_ADDR)
1142
1143#define LLBAR_LBAR_MASK 0x7f /* Number of memory words to fill 1 line */
1144#define LLBAR_LBAR_SHIFT 0
1145
1146/*
1147 * LCD Octet Terminal Count Register
1148 */
1149#define LOTCR_ADDR 0xfffffa2b
1150#define LOTCR BYTE_REF(LOTCR_ADDR)
1151
1152/*
1153 * LCD Panning Offset Register
1154 */
1155#define LPOSR_ADDR 0xfffffa2d
1156#define LPOSR BYTE_REF(LPOSR_ADDR)
1157
1158#define LPOSR_BOS 0x08 /* Byte offset (for B/W mode only */
1159#define LPOSR_POS_MASK 0x07 /* Pixel Offset Code */
1160#define LPOSR_POS_SHIFT 0
1161
1162/*
1163 * LCD Frame Rate Control Modulation Register
1164 */
1165#define LFRCM_ADDR 0xfffffa31
1166#define LFRCM BYTE_REF(LFRCM_ADDR)
1167
1168#define LFRCM_YMOD_MASK 0x0f /* Vertical Modulation */
1169#define LFRCM_YMOD_SHIFT 0
1170#define LFRCM_XMOD_MASK 0xf0 /* Horizontal Modulation */
1171#define LFRCM_XMOD_SHIFT 4
1172
1173/*
1174 * LCD Gray Palette Mapping Register
1175 */
1176#define LGPMR_ADDR 0xfffffa32
1177#define LGPMR WORD_REF(LGPMR_ADDR)
1178
1179#define LGPMR_GLEVEL3_MASK 0x000f
1180#define LGPMR_GLEVEL3_SHIFT 0
1181#define LGPMR_GLEVEL2_MASK 0x00f0
1182#define LGPMR_GLEVEL2_SHIFT 4
1183#define LGPMR_GLEVEL0_MASK 0x0f00
1184#define LGPMR_GLEVEL0_SHIFT 8
1185#define LGPMR_GLEVEL1_MASK 0xf000
1186#define LGPMR_GLEVEL1_SHIFT 12
1187
1188/**********
1189 *
1190 * 0xFFFFFBxx -- Real-Time Clock (RTC)
1191 *
1192 **********/
1193
1194/*
1195 * RTC Hours Minutes and Seconds Register
1196 */
1197#define RTCTIME_ADDR 0xfffffb00
1198#define RTCTIME LONG_REF(RTCTIME_ADDR)
1199
1200#define RTCTIME_SECONDS_MASK 0x0000003f /* Seconds */
1201#define RTCTIME_SECONDS_SHIFT 0
1202#define RTCTIME_MINUTES_MASK 0x003f0000 /* Minutes */
1203#define RTCTIME_MINUTES_SHIFT 16
1204#define RTCTIME_HOURS_MASK 0x1f000000 /* Hours */
1205#define RTCTIME_HOURS_SHIFT 24
1206
1207/*
1208 * RTC Alarm Register
1209 */
1210#define RTCALRM_ADDR 0xfffffb04
1211#define RTCALRM LONG_REF(RTCALRM_ADDR)
1212
1213#define RTCALRM_SECONDS_MASK 0x0000003f /* Seconds */
1214#define RTCALRM_SECONDS_SHIFT 0
1215#define RTCALRM_MINUTES_MASK 0x003f0000 /* Minutes */
1216#define RTCALRM_MINUTES_SHIFT 16
1217#define RTCALRM_HOURS_MASK 0x1f000000 /* Hours */
1218#define RTCALRM_HOURS_SHIFT 24
1219
1220/*
1221 * RTC Control Register
1222 */
1223#define RTCCTL_ADDR 0xfffffb0c
1224#define RTCCTL WORD_REF(RTCCTL_ADDR)
1225
1226#define RTCCTL_384 0x0020 /* Crystal Selection */
1227#define RTCCTL_ENABLE 0x0080 /* RTC Enable */
1228
1229/* 'EZ328-compatible definitions */
1230#define RTCCTL_XTL RTCCTL_384
1231#define RTCCTL_EN RTCCTL_ENABLE
1232
1233/*
1234 * RTC Interrupt Status Register
1235 */
1236#define RTCISR_ADDR 0xfffffb0e
1237#define RTCISR WORD_REF(RTCISR_ADDR)
1238
1239#define RTCISR_SW 0x0001 /* Stopwatch timed out */
1240#define RTCISR_MIN 0x0002 /* 1-minute interrupt has occurred */
1241#define RTCISR_ALM 0x0004 /* Alarm interrupt has occurred */
1242#define RTCISR_DAY 0x0008 /* 24-hour rollover interrupt has occurred */
1243#define RTCISR_1HZ 0x0010 /* 1Hz interrupt has occurred */
1244
1245/*
1246 * RTC Interrupt Enable Register
1247 */
1248#define RTCIENR_ADDR 0xfffffb10
1249#define RTCIENR WORD_REF(RTCIENR_ADDR)
1250
1251#define RTCIENR_SW 0x0001 /* Stopwatch interrupt enable */
1252#define RTCIENR_MIN 0x0002 /* 1-minute interrupt enable */
1253#define RTCIENR_ALM 0x0004 /* Alarm interrupt enable */
1254#define RTCIENR_DAY 0x0008 /* 24-hour rollover interrupt enable */
1255#define RTCIENR_1HZ 0x0010 /* 1Hz interrupt enable */
1256
1257/*
1258 * Stopwatch Minutes Register
1259 */
1260#define STPWCH_ADDR 0xfffffb12
1261#define STPWCH WORD_REF(STPWCH)
1262
1263#define STPWCH_CNT_MASK 0x00ff /* Stopwatch countdown value */
1264#define SPTWCH_CNT_SHIFT 0
1265
1266#endif /* _MC68328_H_ */
generated by cgit v1.2.2 (git 2.25.0) at 2024-11-06 21:38:46 -0500