aboutsummaryrefslogtreecommitdiffstats
path: root/arch/m68k
diff options
context:
space:
mode:
Diffstat (limited to 'arch/m68k')
-rw-r--r--arch/m68k/include/asm/dma.h492
-rw-r--r--arch/m68k/include/asm/dma_mm.h16
-rw-r--r--arch/m68k/include/asm/dma_no.h494
3 files changed, 489 insertions, 513 deletions
diff --git a/arch/m68k/include/asm/dma.h b/arch/m68k/include/asm/dma.h
index b82e660cf1c2..3b85f6e6c098 100644
--- a/arch/m68k/include/asm/dma.h
+++ b/arch/m68k/include/asm/dma.h
@@ -1,5 +1,491 @@
1#ifdef __uClinux__ 1#ifndef _M68K_DMA_H
2#include "dma_no.h" 2#define _M68K_DMA_H 1
3
4#ifdef CONFIG_COLDFIRE
5/*
6 * ColdFire DMA Model:
7 * ColdFire DMA supports two forms of DMA: Single and Dual address. Single
8 * address mode emits a source address, and expects that the device will either
9 * pick up the data (DMA READ) or source data (DMA WRITE). This implies that
10 * the device will place data on the correct byte(s) of the data bus, as the
11 * memory transactions are always 32 bits. This implies that only 32 bit
12 * devices will find single mode transfers useful. Dual address DMA mode
13 * performs two cycles: source read and destination write. ColdFire will
14 * align the data so that the device will always get the correct bytes, thus
15 * is useful for 8 and 16 bit devices. This is the mode that is supported
16 * below.
17 *
18 * AUG/22/2000 : added support for 32-bit Dual-Address-Mode (K) 2000
19 * Oliver Kamphenkel (O.Kamphenkel@tu-bs.de)
20 *
21 * AUG/25/2000 : addad support for 8, 16 and 32-bit Single-Address-Mode (K)2000
22 * Oliver Kamphenkel (O.Kamphenkel@tu-bs.de)
23 *
24 * APR/18/2002 : added proper support for MCF5272 DMA controller.
25 * Arthur Shipkowski (art@videon-central.com)
26 */
27
28#include <asm/coldfire.h>
29#include <asm/mcfsim.h>
30#include <asm/mcfdma.h>
31
32/*
33 * Set number of channels of DMA on ColdFire for different implementations.
34 */
35#if defined(CONFIG_M5249) || defined(CONFIG_M5307) || defined(CONFIG_M5407) || \
36 defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x)
37#define MAX_M68K_DMA_CHANNELS 4
38#elif defined(CONFIG_M5272)
39#define MAX_M68K_DMA_CHANNELS 1
40#elif defined(CONFIG_M532x)
41#define MAX_M68K_DMA_CHANNELS 0
3#else 42#else
4#include "dma_mm.h" 43#define MAX_M68K_DMA_CHANNELS 2
5#endif 44#endif
45
46extern unsigned int dma_base_addr[MAX_M68K_DMA_CHANNELS];
47extern unsigned int dma_device_address[MAX_M68K_DMA_CHANNELS];
48
49#if !defined(CONFIG_M5272)
50#define DMA_MODE_WRITE_BIT 0x01 /* Memory/IO to IO/Memory select */
51#define DMA_MODE_WORD_BIT 0x02 /* 8 or 16 bit transfers */
52#define DMA_MODE_LONG_BIT 0x04 /* or 32 bit transfers */
53#define DMA_MODE_SINGLE_BIT 0x08 /* single-address-mode */
54
55/* I/O to memory, 8 bits, mode */
56#define DMA_MODE_READ 0
57/* memory to I/O, 8 bits, mode */
58#define DMA_MODE_WRITE 1
59/* I/O to memory, 16 bits, mode */
60#define DMA_MODE_READ_WORD 2
61/* memory to I/O, 16 bits, mode */
62#define DMA_MODE_WRITE_WORD 3
63/* I/O to memory, 32 bits, mode */
64#define DMA_MODE_READ_LONG 4
65/* memory to I/O, 32 bits, mode */
66#define DMA_MODE_WRITE_LONG 5
67/* I/O to memory, 8 bits, single-address-mode */
68#define DMA_MODE_READ_SINGLE 8
69/* memory to I/O, 8 bits, single-address-mode */
70#define DMA_MODE_WRITE_SINGLE 9
71/* I/O to memory, 16 bits, single-address-mode */
72#define DMA_MODE_READ_WORD_SINGLE 10
73/* memory to I/O, 16 bits, single-address-mode */
74#define DMA_MODE_WRITE_WORD_SINGLE 11
75/* I/O to memory, 32 bits, single-address-mode */
76#define DMA_MODE_READ_LONG_SINGLE 12
77/* memory to I/O, 32 bits, single-address-mode */
78#define DMA_MODE_WRITE_LONG_SINGLE 13
79
80#else /* CONFIG_M5272 is defined */
81
82/* Source static-address mode */
83#define DMA_MODE_SRC_SA_BIT 0x01
84/* Two bits to select between all four modes */
85#define DMA_MODE_SSIZE_MASK 0x06
86/* Offset to shift bits in */
87#define DMA_MODE_SSIZE_OFF 0x01
88/* Destination static-address mode */
89#define DMA_MODE_DES_SA_BIT 0x10
90/* Two bits to select between all four modes */
91#define DMA_MODE_DSIZE_MASK 0x60
92/* Offset to shift bits in */
93#define DMA_MODE_DSIZE_OFF 0x05
94/* Size modifiers */
95#define DMA_MODE_SIZE_LONG 0x00
96#define DMA_MODE_SIZE_BYTE 0x01
97#define DMA_MODE_SIZE_WORD 0x02
98#define DMA_MODE_SIZE_LINE 0x03
99
100/*
101 * Aliases to help speed quick ports; these may be suboptimal, however. They
102 * do not include the SINGLE mode modifiers since the MCF5272 does not have a
103 * mode where the device is in control of its addressing.
104 */
105
106/* I/O to memory, 8 bits, mode */
107#define DMA_MODE_READ ((DMA_MODE_SIZE_BYTE << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_BYTE << DMA_MODE_SSIZE_OFF) | DMA_SRC_SA_BIT)
108/* memory to I/O, 8 bits, mode */
109#define DMA_MODE_WRITE ((DMA_MODE_SIZE_BYTE << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_BYTE << DMA_MODE_SSIZE_OFF) | DMA_DES_SA_BIT)
110/* I/O to memory, 16 bits, mode */
111#define DMA_MODE_READ_WORD ((DMA_MODE_SIZE_WORD << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_WORD << DMA_MODE_SSIZE_OFF) | DMA_SRC_SA_BIT)
112/* memory to I/O, 16 bits, mode */
113#define DMA_MODE_WRITE_WORD ((DMA_MODE_SIZE_WORD << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_WORD << DMA_MODE_SSIZE_OFF) | DMA_DES_SA_BIT)
114/* I/O to memory, 32 bits, mode */
115#define DMA_MODE_READ_LONG ((DMA_MODE_SIZE_LONG << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_LONG << DMA_MODE_SSIZE_OFF) | DMA_SRC_SA_BIT)
116/* memory to I/O, 32 bits, mode */
117#define DMA_MODE_WRITE_LONG ((DMA_MODE_SIZE_LONG << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_LONG << DMA_MODE_SSIZE_OFF) | DMA_DES_SA_BIT)
118
119#endif /* !defined(CONFIG_M5272) */
120
121#if !defined(CONFIG_M5272)
122/* enable/disable a specific DMA channel */
123static __inline__ void enable_dma(unsigned int dmanr)
124{
125 volatile unsigned short *dmawp;
126
127#ifdef DMA_DEBUG
128 printk("enable_dma(dmanr=%d)\n", dmanr);
129#endif
130
131 dmawp = (unsigned short *) dma_base_addr[dmanr];
132 dmawp[MCFDMA_DCR] |= MCFDMA_DCR_EEXT;
133}
134
135static __inline__ void disable_dma(unsigned int dmanr)
136{
137 volatile unsigned short *dmawp;
138 volatile unsigned char *dmapb;
139
140#ifdef DMA_DEBUG
141 printk("disable_dma(dmanr=%d)\n", dmanr);
142#endif
143
144 dmawp = (unsigned short *) dma_base_addr[dmanr];
145 dmapb = (unsigned char *) dma_base_addr[dmanr];
146
147 /* Turn off external requests, and stop any DMA in progress */
148 dmawp[MCFDMA_DCR] &= ~MCFDMA_DCR_EEXT;
149 dmapb[MCFDMA_DSR] = MCFDMA_DSR_DONE;
150}
151
152/*
153 * Clear the 'DMA Pointer Flip Flop'.
154 * Write 0 for LSB/MSB, 1 for MSB/LSB access.
155 * Use this once to initialize the FF to a known state.
156 * After that, keep track of it. :-)
157 * --- In order to do that, the DMA routines below should ---
158 * --- only be used while interrupts are disabled! ---
159 *
160 * This is a NOP for ColdFire. Provide a stub for compatibility.
161 */
162static __inline__ void clear_dma_ff(unsigned int dmanr)
163{
164}
165
166/* set mode (above) for a specific DMA channel */
167static __inline__ void set_dma_mode(unsigned int dmanr, char mode)
168{
169
170 volatile unsigned char *dmabp;
171 volatile unsigned short *dmawp;
172
173#ifdef DMA_DEBUG
174 printk("set_dma_mode(dmanr=%d,mode=%d)\n", dmanr, mode);
175#endif
176
177 dmabp = (unsigned char *) dma_base_addr[dmanr];
178 dmawp = (unsigned short *) dma_base_addr[dmanr];
179
180 // Clear config errors
181 dmabp[MCFDMA_DSR] = MCFDMA_DSR_DONE;
182
183 // Set command register
184 dmawp[MCFDMA_DCR] =
185 MCFDMA_DCR_INT | // Enable completion irq
186 MCFDMA_DCR_CS | // Force one xfer per request
187 MCFDMA_DCR_AA | // Enable auto alignment
188 // single-address-mode
189 ((mode & DMA_MODE_SINGLE_BIT) ? MCFDMA_DCR_SAA : 0) |
190 // sets s_rw (-> r/w) high if Memory to I/0
191 ((mode & DMA_MODE_WRITE_BIT) ? MCFDMA_DCR_S_RW : 0) |
192 // Memory to I/O or I/O to Memory
193 ((mode & DMA_MODE_WRITE_BIT) ? MCFDMA_DCR_SINC : MCFDMA_DCR_DINC) |
194 // 32 bit, 16 bit or 8 bit transfers
195 ((mode & DMA_MODE_WORD_BIT) ? MCFDMA_DCR_SSIZE_WORD :
196 ((mode & DMA_MODE_LONG_BIT) ? MCFDMA_DCR_SSIZE_LONG :
197 MCFDMA_DCR_SSIZE_BYTE)) |
198 ((mode & DMA_MODE_WORD_BIT) ? MCFDMA_DCR_DSIZE_WORD :
199 ((mode & DMA_MODE_LONG_BIT) ? MCFDMA_DCR_DSIZE_LONG :
200 MCFDMA_DCR_DSIZE_BYTE));
201
202#ifdef DEBUG_DMA
203 printk("%s(%d): dmanr=%d DSR[%x]=%x DCR[%x]=%x\n", __FILE__, __LINE__,
204 dmanr, (int) &dmabp[MCFDMA_DSR], dmabp[MCFDMA_DSR],
205 (int) &dmawp[MCFDMA_DCR], dmawp[MCFDMA_DCR]);
206#endif
207}
208
209/* Set transfer address for specific DMA channel */
210static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int a)
211{
212 volatile unsigned short *dmawp;
213 volatile unsigned int *dmalp;
214
215#ifdef DMA_DEBUG
216 printk("set_dma_addr(dmanr=%d,a=%x)\n", dmanr, a);
217#endif
218
219 dmawp = (unsigned short *) dma_base_addr[dmanr];
220 dmalp = (unsigned int *) dma_base_addr[dmanr];
221
222 // Determine which address registers are used for memory/device accesses
223 if (dmawp[MCFDMA_DCR] & MCFDMA_DCR_SINC) {
224 // Source incrementing, must be memory
225 dmalp[MCFDMA_SAR] = a;
226 // Set dest address, must be device
227 dmalp[MCFDMA_DAR] = dma_device_address[dmanr];
228 } else {
229 // Destination incrementing, must be memory
230 dmalp[MCFDMA_DAR] = a;
231 // Set source address, must be device
232 dmalp[MCFDMA_SAR] = dma_device_address[dmanr];
233 }
234
235#ifdef DEBUG_DMA
236 printk("%s(%d): dmanr=%d DCR[%x]=%x SAR[%x]=%08x DAR[%x]=%08x\n",
237 __FILE__, __LINE__, dmanr, (int) &dmawp[MCFDMA_DCR], dmawp[MCFDMA_DCR],
238 (int) &dmalp[MCFDMA_SAR], dmalp[MCFDMA_SAR],
239 (int) &dmalp[MCFDMA_DAR], dmalp[MCFDMA_DAR]);
240#endif
241}
242
243/*
244 * Specific for Coldfire - sets device address.
245 * Should be called after the mode set call, and before set DMA address.
246 */
247static __inline__ void set_dma_device_addr(unsigned int dmanr, unsigned int a)
248{
249#ifdef DMA_DEBUG
250 printk("set_dma_device_addr(dmanr=%d,a=%x)\n", dmanr, a);
251#endif
252
253 dma_device_address[dmanr] = a;
254}
255
256/*
257 * NOTE 2: "count" represents _bytes_.
258 */
259static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count)
260{
261 volatile unsigned short *dmawp;
262
263#ifdef DMA_DEBUG
264 printk("set_dma_count(dmanr=%d,count=%d)\n", dmanr, count);
265#endif
266
267 dmawp = (unsigned short *) dma_base_addr[dmanr];
268 dmawp[MCFDMA_BCR] = (unsigned short)count;
269}
270
271/*
272 * Get DMA residue count. After a DMA transfer, this
273 * should return zero. Reading this while a DMA transfer is
274 * still in progress will return unpredictable results.
275 * Otherwise, it returns the number of _bytes_ left to transfer.
276 */
277static __inline__ int get_dma_residue(unsigned int dmanr)
278{
279 volatile unsigned short *dmawp;
280 unsigned short count;
281
282#ifdef DMA_DEBUG
283 printk("get_dma_residue(dmanr=%d)\n", dmanr);
284#endif
285
286 dmawp = (unsigned short *) dma_base_addr[dmanr];
287 count = dmawp[MCFDMA_BCR];
288 return((int) count);
289}
290#else /* CONFIG_M5272 is defined */
291
292/*
293 * The MCF5272 DMA controller is very different than the controller defined above
294 * in terms of register mapping. For instance, with the exception of the 16-bit
295 * interrupt register (IRQ#85, for reference), all of the registers are 32-bit.
296 *
297 * The big difference, however, is the lack of device-requested DMA. All modes
298 * are dual address transfer, and there is no 'device' setup or direction bit.
299 * You can DMA between a device and memory, between memory and memory, or even between
300 * two devices directly, with any combination of incrementing and non-incrementing
301 * addresses you choose. This puts a crimp in distinguishing between the 'device
302 * address' set up by set_dma_device_addr.
303 *
304 * Therefore, there are two options. One is to use set_dma_addr and set_dma_device_addr,
305 * which will act exactly as above in -- it will look to see if the source is set to
306 * autoincrement, and if so it will make the source use the set_dma_addr value and the
307 * destination the set_dma_device_addr value. Otherwise the source will be set to the
308 * set_dma_device_addr value and the destination will get the set_dma_addr value.
309 *
310 * The other is to use the provided set_dma_src_addr and set_dma_dest_addr functions
311 * and make it explicit. Depending on what you're doing, one of these two should work
312 * for you, but don't mix them in the same transfer setup.
313 */
314
315/* enable/disable a specific DMA channel */
316static __inline__ void enable_dma(unsigned int dmanr)
317{
318 volatile unsigned int *dmalp;
319
320#ifdef DMA_DEBUG
321 printk("enable_dma(dmanr=%d)\n", dmanr);
322#endif
323
324 dmalp = (unsigned int *) dma_base_addr[dmanr];
325 dmalp[MCFDMA_DMR] |= MCFDMA_DMR_EN;
326}
327
328static __inline__ void disable_dma(unsigned int dmanr)
329{
330 volatile unsigned int *dmalp;
331
332#ifdef DMA_DEBUG
333 printk("disable_dma(dmanr=%d)\n", dmanr);
334#endif
335
336 dmalp = (unsigned int *) dma_base_addr[dmanr];
337
338 /* Turn off external requests, and stop any DMA in progress */
339 dmalp[MCFDMA_DMR] &= ~MCFDMA_DMR_EN;
340 dmalp[MCFDMA_DMR] |= MCFDMA_DMR_RESET;
341}
342
343/*
344 * Clear the 'DMA Pointer Flip Flop'.
345 * Write 0 for LSB/MSB, 1 for MSB/LSB access.
346 * Use this once to initialize the FF to a known state.
347 * After that, keep track of it. :-)
348 * --- In order to do that, the DMA routines below should ---
349 * --- only be used while interrupts are disabled! ---
350 *
351 * This is a NOP for ColdFire. Provide a stub for compatibility.
352 */
353static __inline__ void clear_dma_ff(unsigned int dmanr)
354{
355}
356
357/* set mode (above) for a specific DMA channel */
358static __inline__ void set_dma_mode(unsigned int dmanr, char mode)
359{
360
361 volatile unsigned int *dmalp;
362 volatile unsigned short *dmawp;
363
364#ifdef DMA_DEBUG
365 printk("set_dma_mode(dmanr=%d,mode=%d)\n", dmanr, mode);
366#endif
367 dmalp = (unsigned int *) dma_base_addr[dmanr];
368 dmawp = (unsigned short *) dma_base_addr[dmanr];
369
370 // Clear config errors
371 dmalp[MCFDMA_DMR] |= MCFDMA_DMR_RESET;
372
373 // Set command register
374 dmalp[MCFDMA_DMR] =
375 MCFDMA_DMR_RQM_DUAL | // Mandatory Request Mode setting
376 MCFDMA_DMR_DSTT_SD | // Set up addressing types; set to supervisor-data.
377 MCFDMA_DMR_SRCT_SD | // Set up addressing types; set to supervisor-data.
378 // source static-address-mode
379 ((mode & DMA_MODE_SRC_SA_BIT) ? MCFDMA_DMR_SRCM_SA : MCFDMA_DMR_SRCM_IA) |
380 // dest static-address-mode
381 ((mode & DMA_MODE_DES_SA_BIT) ? MCFDMA_DMR_DSTM_SA : MCFDMA_DMR_DSTM_IA) |
382 // burst, 32 bit, 16 bit or 8 bit transfers are separately configurable on the MCF5272
383 (((mode & DMA_MODE_SSIZE_MASK) >> DMA_MODE_SSIZE_OFF) << MCFDMA_DMR_DSTS_OFF) |
384 (((mode & DMA_MODE_SSIZE_MASK) >> DMA_MODE_SSIZE_OFF) << MCFDMA_DMR_SRCS_OFF);
385
386 dmawp[MCFDMA_DIR] |= MCFDMA_DIR_ASCEN; /* Enable completion interrupts */
387
388#ifdef DEBUG_DMA
389 printk("%s(%d): dmanr=%d DMR[%x]=%x DIR[%x]=%x\n", __FILE__, __LINE__,
390 dmanr, (int) &dmalp[MCFDMA_DMR], dmabp[MCFDMA_DMR],
391 (int) &dmawp[MCFDMA_DIR], dmawp[MCFDMA_DIR]);
392#endif
393}
394
395/* Set transfer address for specific DMA channel */
396static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int a)
397{
398 volatile unsigned int *dmalp;
399
400#ifdef DMA_DEBUG
401 printk("set_dma_addr(dmanr=%d,a=%x)\n", dmanr, a);
402#endif
403
404 dmalp = (unsigned int *) dma_base_addr[dmanr];
405
406 // Determine which address registers are used for memory/device accesses
407 if (dmalp[MCFDMA_DMR] & MCFDMA_DMR_SRCM) {
408 // Source incrementing, must be memory
409 dmalp[MCFDMA_DSAR] = a;
410 // Set dest address, must be device
411 dmalp[MCFDMA_DDAR] = dma_device_address[dmanr];
412 } else {
413 // Destination incrementing, must be memory
414 dmalp[MCFDMA_DDAR] = a;
415 // Set source address, must be device
416 dmalp[MCFDMA_DSAR] = dma_device_address[dmanr];
417 }
418
419#ifdef DEBUG_DMA
420 printk("%s(%d): dmanr=%d DMR[%x]=%x SAR[%x]=%08x DAR[%x]=%08x\n",
421 __FILE__, __LINE__, dmanr, (int) &dmawp[MCFDMA_DMR], dmawp[MCFDMA_DMR],
422 (int) &dmalp[MCFDMA_DSAR], dmalp[MCFDMA_DSAR],
423 (int) &dmalp[MCFDMA_DDAR], dmalp[MCFDMA_DDAR]);
424#endif
425}
426
427/*
428 * Specific for Coldfire - sets device address.
429 * Should be called after the mode set call, and before set DMA address.
430 */
431static __inline__ void set_dma_device_addr(unsigned int dmanr, unsigned int a)
432{
433#ifdef DMA_DEBUG
434 printk("set_dma_device_addr(dmanr=%d,a=%x)\n", dmanr, a);
435#endif
436
437 dma_device_address[dmanr] = a;
438}
439
440/*
441 * NOTE 2: "count" represents _bytes_.
442 *
443 * NOTE 3: While a 32-bit register, "count" is only a maximum 24-bit value.
444 */
445static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count)
446{
447 volatile unsigned int *dmalp;
448
449#ifdef DMA_DEBUG
450 printk("set_dma_count(dmanr=%d,count=%d)\n", dmanr, count);
451#endif
452
453 dmalp = (unsigned int *) dma_base_addr[dmanr];
454 dmalp[MCFDMA_DBCR] = count;
455}
456
457/*
458 * Get DMA residue count. After a DMA transfer, this
459 * should return zero. Reading this while a DMA transfer is
460 * still in progress will return unpredictable results.
461 * Otherwise, it returns the number of _bytes_ left to transfer.
462 */
463static __inline__ int get_dma_residue(unsigned int dmanr)
464{
465 volatile unsigned int *dmalp;
466 unsigned int count;
467
468#ifdef DMA_DEBUG
469 printk("get_dma_residue(dmanr=%d)\n", dmanr);
470#endif
471
472 dmalp = (unsigned int *) dma_base_addr[dmanr];
473 count = dmalp[MCFDMA_DBCR];
474 return(count);
475}
476
477#endif /* !defined(CONFIG_M5272) */
478#endif /* CONFIG_COLDFIRE */
479
480/* it's useless on the m68k, but unfortunately needed by the new
481 bootmem allocator (but this should do it for this) */
482#define MAX_DMA_ADDRESS PAGE_OFFSET
483
484#define MAX_DMA_CHANNELS 8
485
486extern int request_dma(unsigned int dmanr, const char * device_id); /* reserve a DMA channel */
487extern void free_dma(unsigned int dmanr); /* release it again */
488
489#define isa_dma_bridge_buggy (0)
490
491#endif /* _M68K_DMA_H */
diff --git a/arch/m68k/include/asm/dma_mm.h b/arch/m68k/include/asm/dma_mm.h
deleted file mode 100644
index 4240fbc946f8..000000000000
--- a/arch/m68k/include/asm/dma_mm.h
+++ /dev/null
@@ -1,16 +0,0 @@
1#ifndef _M68K_DMA_H
2#define _M68K_DMA_H 1
3
4
5/* it's useless on the m68k, but unfortunately needed by the new
6 bootmem allocator (but this should do it for this) */
7#define MAX_DMA_ADDRESS PAGE_OFFSET
8
9#define MAX_DMA_CHANNELS 8
10
11extern int request_dma(unsigned int dmanr, const char * device_id); /* reserve a DMA channel */
12extern void free_dma(unsigned int dmanr); /* release it again */
13
14#define isa_dma_bridge_buggy (0)
15
16#endif /* _M68K_DMA_H */
diff --git a/arch/m68k/include/asm/dma_no.h b/arch/m68k/include/asm/dma_no.h
deleted file mode 100644
index 939a02056217..000000000000
--- a/arch/m68k/include/asm/dma_no.h
+++ /dev/null
@@ -1,494 +0,0 @@
1#ifndef _M68K_DMA_H
2#define _M68K_DMA_H 1
3
4//#define DMA_DEBUG 1
5
6
7#ifdef CONFIG_COLDFIRE
8/*
9 * ColdFire DMA Model:
10 * ColdFire DMA supports two forms of DMA: Single and Dual address. Single
11 * address mode emits a source address, and expects that the device will either
12 * pick up the data (DMA READ) or source data (DMA WRITE). This implies that
13 * the device will place data on the correct byte(s) of the data bus, as the
14 * memory transactions are always 32 bits. This implies that only 32 bit
15 * devices will find single mode transfers useful. Dual address DMA mode
16 * performs two cycles: source read and destination write. ColdFire will
17 * align the data so that the device will always get the correct bytes, thus
18 * is useful for 8 and 16 bit devices. This is the mode that is supported
19 * below.
20 *
21 * AUG/22/2000 : added support for 32-bit Dual-Address-Mode (K) 2000
22 * Oliver Kamphenkel (O.Kamphenkel@tu-bs.de)
23 *
24 * AUG/25/2000 : addad support for 8, 16 and 32-bit Single-Address-Mode (K)2000
25 * Oliver Kamphenkel (O.Kamphenkel@tu-bs.de)
26 *
27 * APR/18/2002 : added proper support for MCF5272 DMA controller.
28 * Arthur Shipkowski (art@videon-central.com)
29 */
30
31#include <asm/coldfire.h>
32#include <asm/mcfsim.h>
33#include <asm/mcfdma.h>
34
35/*
36 * Set number of channels of DMA on ColdFire for different implementations.
37 */
38#if defined(CONFIG_M5249) || defined(CONFIG_M5307) || defined(CONFIG_M5407) || \
39 defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x)
40#define MAX_M68K_DMA_CHANNELS 4
41#elif defined(CONFIG_M5272)
42#define MAX_M68K_DMA_CHANNELS 1
43#elif defined(CONFIG_M532x)
44#define MAX_M68K_DMA_CHANNELS 0
45#else
46#define MAX_M68K_DMA_CHANNELS 2
47#endif
48
49extern unsigned int dma_base_addr[MAX_M68K_DMA_CHANNELS];
50extern unsigned int dma_device_address[MAX_M68K_DMA_CHANNELS];
51
52#if !defined(CONFIG_M5272)
53#define DMA_MODE_WRITE_BIT 0x01 /* Memory/IO to IO/Memory select */
54#define DMA_MODE_WORD_BIT 0x02 /* 8 or 16 bit transfers */
55#define DMA_MODE_LONG_BIT 0x04 /* or 32 bit transfers */
56#define DMA_MODE_SINGLE_BIT 0x08 /* single-address-mode */
57
58/* I/O to memory, 8 bits, mode */
59#define DMA_MODE_READ 0
60/* memory to I/O, 8 bits, mode */
61#define DMA_MODE_WRITE 1
62/* I/O to memory, 16 bits, mode */
63#define DMA_MODE_READ_WORD 2
64/* memory to I/O, 16 bits, mode */
65#define DMA_MODE_WRITE_WORD 3
66/* I/O to memory, 32 bits, mode */
67#define DMA_MODE_READ_LONG 4
68/* memory to I/O, 32 bits, mode */
69#define DMA_MODE_WRITE_LONG 5
70/* I/O to memory, 8 bits, single-address-mode */
71#define DMA_MODE_READ_SINGLE 8
72/* memory to I/O, 8 bits, single-address-mode */
73#define DMA_MODE_WRITE_SINGLE 9
74/* I/O to memory, 16 bits, single-address-mode */
75#define DMA_MODE_READ_WORD_SINGLE 10
76/* memory to I/O, 16 bits, single-address-mode */
77#define DMA_MODE_WRITE_WORD_SINGLE 11
78/* I/O to memory, 32 bits, single-address-mode */
79#define DMA_MODE_READ_LONG_SINGLE 12
80/* memory to I/O, 32 bits, single-address-mode */
81#define DMA_MODE_WRITE_LONG_SINGLE 13
82
83#else /* CONFIG_M5272 is defined */
84
85/* Source static-address mode */
86#define DMA_MODE_SRC_SA_BIT 0x01
87/* Two bits to select between all four modes */
88#define DMA_MODE_SSIZE_MASK 0x06
89/* Offset to shift bits in */
90#define DMA_MODE_SSIZE_OFF 0x01
91/* Destination static-address mode */
92#define DMA_MODE_DES_SA_BIT 0x10
93/* Two bits to select between all four modes */
94#define DMA_MODE_DSIZE_MASK 0x60
95/* Offset to shift bits in */
96#define DMA_MODE_DSIZE_OFF 0x05
97/* Size modifiers */
98#define DMA_MODE_SIZE_LONG 0x00
99#define DMA_MODE_SIZE_BYTE 0x01
100#define DMA_MODE_SIZE_WORD 0x02
101#define DMA_MODE_SIZE_LINE 0x03
102
103/*
104 * Aliases to help speed quick ports; these may be suboptimal, however. They
105 * do not include the SINGLE mode modifiers since the MCF5272 does not have a
106 * mode where the device is in control of its addressing.
107 */
108
109/* I/O to memory, 8 bits, mode */
110#define DMA_MODE_READ ((DMA_MODE_SIZE_BYTE << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_BYTE << DMA_MODE_SSIZE_OFF) | DMA_SRC_SA_BIT)
111/* memory to I/O, 8 bits, mode */
112#define DMA_MODE_WRITE ((DMA_MODE_SIZE_BYTE << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_BYTE << DMA_MODE_SSIZE_OFF) | DMA_DES_SA_BIT)
113/* I/O to memory, 16 bits, mode */
114#define DMA_MODE_READ_WORD ((DMA_MODE_SIZE_WORD << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_WORD << DMA_MODE_SSIZE_OFF) | DMA_SRC_SA_BIT)
115/* memory to I/O, 16 bits, mode */
116#define DMA_MODE_WRITE_WORD ((DMA_MODE_SIZE_WORD << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_WORD << DMA_MODE_SSIZE_OFF) | DMA_DES_SA_BIT)
117/* I/O to memory, 32 bits, mode */
118#define DMA_MODE_READ_LONG ((DMA_MODE_SIZE_LONG << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_LONG << DMA_MODE_SSIZE_OFF) | DMA_SRC_SA_BIT)
119/* memory to I/O, 32 bits, mode */
120#define DMA_MODE_WRITE_LONG ((DMA_MODE_SIZE_LONG << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_LONG << DMA_MODE_SSIZE_OFF) | DMA_DES_SA_BIT)
121
122#endif /* !defined(CONFIG_M5272) */
123
124#if !defined(CONFIG_M5272)
125/* enable/disable a specific DMA channel */
126static __inline__ void enable_dma(unsigned int dmanr)
127{
128 volatile unsigned short *dmawp;
129
130#ifdef DMA_DEBUG
131 printk("enable_dma(dmanr=%d)\n", dmanr);
132#endif
133
134 dmawp = (unsigned short *) dma_base_addr[dmanr];
135 dmawp[MCFDMA_DCR] |= MCFDMA_DCR_EEXT;
136}
137
138static __inline__ void disable_dma(unsigned int dmanr)
139{
140 volatile unsigned short *dmawp;
141 volatile unsigned char *dmapb;
142
143#ifdef DMA_DEBUG
144 printk("disable_dma(dmanr=%d)\n", dmanr);
145#endif
146
147 dmawp = (unsigned short *) dma_base_addr[dmanr];
148 dmapb = (unsigned char *) dma_base_addr[dmanr];
149
150 /* Turn off external requests, and stop any DMA in progress */
151 dmawp[MCFDMA_DCR] &= ~MCFDMA_DCR_EEXT;
152 dmapb[MCFDMA_DSR] = MCFDMA_DSR_DONE;
153}
154
155/*
156 * Clear the 'DMA Pointer Flip Flop'.
157 * Write 0 for LSB/MSB, 1 for MSB/LSB access.
158 * Use this once to initialize the FF to a known state.
159 * After that, keep track of it. :-)
160 * --- In order to do that, the DMA routines below should ---
161 * --- only be used while interrupts are disabled! ---
162 *
163 * This is a NOP for ColdFire. Provide a stub for compatibility.
164 */
165static __inline__ void clear_dma_ff(unsigned int dmanr)
166{
167}
168
169/* set mode (above) for a specific DMA channel */
170static __inline__ void set_dma_mode(unsigned int dmanr, char mode)
171{
172
173 volatile unsigned char *dmabp;
174 volatile unsigned short *dmawp;
175
176#ifdef DMA_DEBUG
177 printk("set_dma_mode(dmanr=%d,mode=%d)\n", dmanr, mode);
178#endif
179
180 dmabp = (unsigned char *) dma_base_addr[dmanr];
181 dmawp = (unsigned short *) dma_base_addr[dmanr];
182
183 // Clear config errors
184 dmabp[MCFDMA_DSR] = MCFDMA_DSR_DONE;
185
186 // Set command register
187 dmawp[MCFDMA_DCR] =
188 MCFDMA_DCR_INT | // Enable completion irq
189 MCFDMA_DCR_CS | // Force one xfer per request
190 MCFDMA_DCR_AA | // Enable auto alignment
191 // single-address-mode
192 ((mode & DMA_MODE_SINGLE_BIT) ? MCFDMA_DCR_SAA : 0) |
193 // sets s_rw (-> r/w) high if Memory to I/0
194 ((mode & DMA_MODE_WRITE_BIT) ? MCFDMA_DCR_S_RW : 0) |
195 // Memory to I/O or I/O to Memory
196 ((mode & DMA_MODE_WRITE_BIT) ? MCFDMA_DCR_SINC : MCFDMA_DCR_DINC) |
197 // 32 bit, 16 bit or 8 bit transfers
198 ((mode & DMA_MODE_WORD_BIT) ? MCFDMA_DCR_SSIZE_WORD :
199 ((mode & DMA_MODE_LONG_BIT) ? MCFDMA_DCR_SSIZE_LONG :
200 MCFDMA_DCR_SSIZE_BYTE)) |
201 ((mode & DMA_MODE_WORD_BIT) ? MCFDMA_DCR_DSIZE_WORD :
202 ((mode & DMA_MODE_LONG_BIT) ? MCFDMA_DCR_DSIZE_LONG :
203 MCFDMA_DCR_DSIZE_BYTE));
204
205#ifdef DEBUG_DMA
206 printk("%s(%d): dmanr=%d DSR[%x]=%x DCR[%x]=%x\n", __FILE__, __LINE__,
207 dmanr, (int) &dmabp[MCFDMA_DSR], dmabp[MCFDMA_DSR],
208 (int) &dmawp[MCFDMA_DCR], dmawp[MCFDMA_DCR]);
209#endif
210}
211
212/* Set transfer address for specific DMA channel */
213static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int a)
214{
215 volatile unsigned short *dmawp;
216 volatile unsigned int *dmalp;
217
218#ifdef DMA_DEBUG
219 printk("set_dma_addr(dmanr=%d,a=%x)\n", dmanr, a);
220#endif
221
222 dmawp = (unsigned short *) dma_base_addr[dmanr];
223 dmalp = (unsigned int *) dma_base_addr[dmanr];
224
225 // Determine which address registers are used for memory/device accesses
226 if (dmawp[MCFDMA_DCR] & MCFDMA_DCR_SINC) {
227 // Source incrementing, must be memory
228 dmalp[MCFDMA_SAR] = a;
229 // Set dest address, must be device
230 dmalp[MCFDMA_DAR] = dma_device_address[dmanr];
231 } else {
232 // Destination incrementing, must be memory
233 dmalp[MCFDMA_DAR] = a;
234 // Set source address, must be device
235 dmalp[MCFDMA_SAR] = dma_device_address[dmanr];
236 }
237
238#ifdef DEBUG_DMA
239 printk("%s(%d): dmanr=%d DCR[%x]=%x SAR[%x]=%08x DAR[%x]=%08x\n",
240 __FILE__, __LINE__, dmanr, (int) &dmawp[MCFDMA_DCR], dmawp[MCFDMA_DCR],
241 (int) &dmalp[MCFDMA_SAR], dmalp[MCFDMA_SAR],
242 (int) &dmalp[MCFDMA_DAR], dmalp[MCFDMA_DAR]);
243#endif
244}
245
246/*
247 * Specific for Coldfire - sets device address.
248 * Should be called after the mode set call, and before set DMA address.
249 */
250static __inline__ void set_dma_device_addr(unsigned int dmanr, unsigned int a)
251{
252#ifdef DMA_DEBUG
253 printk("set_dma_device_addr(dmanr=%d,a=%x)\n", dmanr, a);
254#endif
255
256 dma_device_address[dmanr] = a;
257}
258
259/*
260 * NOTE 2: "count" represents _bytes_.
261 */
262static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count)
263{
264 volatile unsigned short *dmawp;
265
266#ifdef DMA_DEBUG
267 printk("set_dma_count(dmanr=%d,count=%d)\n", dmanr, count);
268#endif
269
270 dmawp = (unsigned short *) dma_base_addr[dmanr];
271 dmawp[MCFDMA_BCR] = (unsigned short)count;
272}
273
274/*
275 * Get DMA residue count. After a DMA transfer, this
276 * should return zero. Reading this while a DMA transfer is
277 * still in progress will return unpredictable results.
278 * Otherwise, it returns the number of _bytes_ left to transfer.
279 */
280static __inline__ int get_dma_residue(unsigned int dmanr)
281{
282 volatile unsigned short *dmawp;
283 unsigned short count;
284
285#ifdef DMA_DEBUG
286 printk("get_dma_residue(dmanr=%d)\n", dmanr);
287#endif
288
289 dmawp = (unsigned short *) dma_base_addr[dmanr];
290 count = dmawp[MCFDMA_BCR];
291 return((int) count);
292}
293#else /* CONFIG_M5272 is defined */
294
295/*
296 * The MCF5272 DMA controller is very different than the controller defined above
297 * in terms of register mapping. For instance, with the exception of the 16-bit
298 * interrupt register (IRQ#85, for reference), all of the registers are 32-bit.
299 *
300 * The big difference, however, is the lack of device-requested DMA. All modes
301 * are dual address transfer, and there is no 'device' setup or direction bit.
302 * You can DMA between a device and memory, between memory and memory, or even between
303 * two devices directly, with any combination of incrementing and non-incrementing
304 * addresses you choose. This puts a crimp in distinguishing between the 'device
305 * address' set up by set_dma_device_addr.
306 *
307 * Therefore, there are two options. One is to use set_dma_addr and set_dma_device_addr,
308 * which will act exactly as above in -- it will look to see if the source is set to
309 * autoincrement, and if so it will make the source use the set_dma_addr value and the
310 * destination the set_dma_device_addr value. Otherwise the source will be set to the
311 * set_dma_device_addr value and the destination will get the set_dma_addr value.
312 *
313 * The other is to use the provided set_dma_src_addr and set_dma_dest_addr functions
314 * and make it explicit. Depending on what you're doing, one of these two should work
315 * for you, but don't mix them in the same transfer setup.
316 */
317
318/* enable/disable a specific DMA channel */
319static __inline__ void enable_dma(unsigned int dmanr)
320{
321 volatile unsigned int *dmalp;
322
323#ifdef DMA_DEBUG
324 printk("enable_dma(dmanr=%d)\n", dmanr);
325#endif
326
327 dmalp = (unsigned int *) dma_base_addr[dmanr];
328 dmalp[MCFDMA_DMR] |= MCFDMA_DMR_EN;
329}
330
331static __inline__ void disable_dma(unsigned int dmanr)
332{
333 volatile unsigned int *dmalp;
334
335#ifdef DMA_DEBUG
336 printk("disable_dma(dmanr=%d)\n", dmanr);
337#endif
338
339 dmalp = (unsigned int *) dma_base_addr[dmanr];
340
341 /* Turn off external requests, and stop any DMA in progress */
342 dmalp[MCFDMA_DMR] &= ~MCFDMA_DMR_EN;
343 dmalp[MCFDMA_DMR] |= MCFDMA_DMR_RESET;
344}
345
346/*
347 * Clear the 'DMA Pointer Flip Flop'.
348 * Write 0 for LSB/MSB, 1 for MSB/LSB access.
349 * Use this once to initialize the FF to a known state.
350 * After that, keep track of it. :-)
351 * --- In order to do that, the DMA routines below should ---
352 * --- only be used while interrupts are disabled! ---
353 *
354 * This is a NOP for ColdFire. Provide a stub for compatibility.
355 */
356static __inline__ void clear_dma_ff(unsigned int dmanr)
357{
358}
359
360/* set mode (above) for a specific DMA channel */
361static __inline__ void set_dma_mode(unsigned int dmanr, char mode)
362{
363
364 volatile unsigned int *dmalp;
365 volatile unsigned short *dmawp;
366
367#ifdef DMA_DEBUG
368 printk("set_dma_mode(dmanr=%d,mode=%d)\n", dmanr, mode);
369#endif
370 dmalp = (unsigned int *) dma_base_addr[dmanr];
371 dmawp = (unsigned short *) dma_base_addr[dmanr];
372
373 // Clear config errors
374 dmalp[MCFDMA_DMR] |= MCFDMA_DMR_RESET;
375
376 // Set command register
377 dmalp[MCFDMA_DMR] =
378 MCFDMA_DMR_RQM_DUAL | // Mandatory Request Mode setting
379 MCFDMA_DMR_DSTT_SD | // Set up addressing types; set to supervisor-data.
380 MCFDMA_DMR_SRCT_SD | // Set up addressing types; set to supervisor-data.
381 // source static-address-mode
382 ((mode & DMA_MODE_SRC_SA_BIT) ? MCFDMA_DMR_SRCM_SA : MCFDMA_DMR_SRCM_IA) |
383 // dest static-address-mode
384 ((mode & DMA_MODE_DES_SA_BIT) ? MCFDMA_DMR_DSTM_SA : MCFDMA_DMR_DSTM_IA) |
385 // burst, 32 bit, 16 bit or 8 bit transfers are separately configurable on the MCF5272
386 (((mode & DMA_MODE_SSIZE_MASK) >> DMA_MODE_SSIZE_OFF) << MCFDMA_DMR_DSTS_OFF) |
387 (((mode & DMA_MODE_SSIZE_MASK) >> DMA_MODE_SSIZE_OFF) << MCFDMA_DMR_SRCS_OFF);
388
389 dmawp[MCFDMA_DIR] |= MCFDMA_DIR_ASCEN; /* Enable completion interrupts */
390
391#ifdef DEBUG_DMA
392 printk("%s(%d): dmanr=%d DMR[%x]=%x DIR[%x]=%x\n", __FILE__, __LINE__,
393 dmanr, (int) &dmalp[MCFDMA_DMR], dmabp[MCFDMA_DMR],
394 (int) &dmawp[MCFDMA_DIR], dmawp[MCFDMA_DIR]);
395#endif
396}
397
398/* Set transfer address for specific DMA channel */
399static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int a)
400{
401 volatile unsigned int *dmalp;
402
403#ifdef DMA_DEBUG
404 printk("set_dma_addr(dmanr=%d,a=%x)\n", dmanr, a);
405#endif
406
407 dmalp = (unsigned int *) dma_base_addr[dmanr];
408
409 // Determine which address registers are used for memory/device accesses
410 if (dmalp[MCFDMA_DMR] & MCFDMA_DMR_SRCM) {
411 // Source incrementing, must be memory
412 dmalp[MCFDMA_DSAR] = a;
413 // Set dest address, must be device
414 dmalp[MCFDMA_DDAR] = dma_device_address[dmanr];
415 } else {
416 // Destination incrementing, must be memory
417 dmalp[MCFDMA_DDAR] = a;
418 // Set source address, must be device
419 dmalp[MCFDMA_DSAR] = dma_device_address[dmanr];
420 }
421
422#ifdef DEBUG_DMA
423 printk("%s(%d): dmanr=%d DMR[%x]=%x SAR[%x]=%08x DAR[%x]=%08x\n",
424 __FILE__, __LINE__, dmanr, (int) &dmawp[MCFDMA_DMR], dmawp[MCFDMA_DMR],
425 (int) &dmalp[MCFDMA_DSAR], dmalp[MCFDMA_DSAR],
426 (int) &dmalp[MCFDMA_DDAR], dmalp[MCFDMA_DDAR]);
427#endif
428}
429
430/*
431 * Specific for Coldfire - sets device address.
432 * Should be called after the mode set call, and before set DMA address.
433 */
434static __inline__ void set_dma_device_addr(unsigned int dmanr, unsigned int a)
435{
436#ifdef DMA_DEBUG
437 printk("set_dma_device_addr(dmanr=%d,a=%x)\n", dmanr, a);
438#endif
439
440 dma_device_address[dmanr] = a;
441}
442
443/*
444 * NOTE 2: "count" represents _bytes_.
445 *
446 * NOTE 3: While a 32-bit register, "count" is only a maximum 24-bit value.
447 */
448static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count)
449{
450 volatile unsigned int *dmalp;
451
452#ifdef DMA_DEBUG
453 printk("set_dma_count(dmanr=%d,count=%d)\n", dmanr, count);
454#endif
455
456 dmalp = (unsigned int *) dma_base_addr[dmanr];
457 dmalp[MCFDMA_DBCR] = count;
458}
459
460/*
461 * Get DMA residue count. After a DMA transfer, this
462 * should return zero. Reading this while a DMA transfer is
463 * still in progress will return unpredictable results.
464 * Otherwise, it returns the number of _bytes_ left to transfer.
465 */
466static __inline__ int get_dma_residue(unsigned int dmanr)
467{
468 volatile unsigned int *dmalp;
469 unsigned int count;
470
471#ifdef DMA_DEBUG
472 printk("get_dma_residue(dmanr=%d)\n", dmanr);
473#endif
474
475 dmalp = (unsigned int *) dma_base_addr[dmanr];
476 count = dmalp[MCFDMA_DBCR];
477 return(count);
478}
479
480#endif /* !defined(CONFIG_M5272) */
481#endif /* CONFIG_COLDFIRE */
482
483#define MAX_DMA_CHANNELS 8
484
485/* Don't define MAX_DMA_ADDRESS; it's useless on the m68k/coldfire and any
486 occurrence should be flagged as an error. */
487/* under 2.4 it is actually needed by the new bootmem allocator */
488#define MAX_DMA_ADDRESS PAGE_OFFSET
489
490/* These are in kernel/dma.c: */
491extern int request_dma(unsigned int dmanr, const char *device_id); /* reserve a DMA channel */
492extern void free_dma(unsigned int dmanr); /* release it again */
493
494#endif /* _M68K_DMA_H */
generated by cgit v1.2.2 (git 2.25.0) at 2024-12-28 00:16:08 -0500