1 files changed, 367 insertions, 0 deletions

diff --git a/arch/m32r/Kconfig b/arch/m32r/Kconfig
new file mode 100644
index 000000000000..0d90ea58a0cb
--- /dev/null
+++ b/arch/m32r/Kconfig
@@ -0,0 +1,367 @@
+#
+# For a description of the syntax of this configuration file,
+# see Documentation/kbuild/kconfig-language.txt.
+#
+
+mainmenu "Linux/M32R Kernel Configuration"
+
+config M32R
+        bool
+        default y
+
+config SBUS
+        bool
+
+config UID16
+        bool
+        default n
+
+config GENERIC_ISA_DMA
+        bool
+        default y
+
+config GENERIC_HARDIRQS
+        bool
+        default y
+
+config GENERIC_IRQ_PROBE
+        bool
+        default y
+
+source "init/Kconfig"
+
+
+menu "Processor type and features"
+
+choice
+        prompt "Platform Type"
+        default PLAT_MAPPI
+
+config PLAT_MAPPI
+        bool "Mappi-I"
+        help
+          The Mappi-I is an FPGA board for SOC (System-On-a-Chip) prototyping.
+          You can operate a Linux system on this board by using an M32R
+          softmacro core, which is a fully-synthesizable functional model
+          described in Verilog-HDL.
+
+          The Mappi-I board was the first platform, which had been used
+          to port and develop a Linux system for the M32R processor.
+          Currently, the Mappi-II, an heir to the Mappi-I, is available.
+
+config PLAT_USRV
+        bool "uServer"
+
+config PLAT_M32700UT
+        bool "M32700UT"
+        help
+          The M3T-M32700UT is an evaluation board based on uT-Engine
+          specification.  This board has an M32700 (Chaos) evaluation chip.
+          You can say Y for SMP, because the M32700 is a single chip
+          multiprocessor.
+
+config PLAT_OPSPUT
+        bool "OPSPUT"
+        help
+          The OPSPUT is an evaluation board based on uT-Engine
+          specification.  This board has a OPSP-REP chip.
+
+config PLAT_OAKS32R
+        bool "OAKS32R"
+        help
+          The OAKS32R is a tiny, inexpensive evaluation board.
+          Please note that if you say Y here and choose chip "M32102",
+          say N for MMU and select a no-MMU version kernel, otherwise
+          a kernel with MMU support will not work, because the M32102
+          is a microcontroller for embedded systems and it has no MMU.
+
+config PLAT_MAPPI2
+       bool "Mappi-II(M3A-ZA36/M3A-ZA52)"
+
+endchoice
+
+choice
+        prompt "Processor family"
+        default CHIP_M32700
+
+config CHIP_M32700
+        bool "M32700 (Chaos)"
+
+config CHIP_M32102
+        bool "M32102"
+
+config CHIP_VDEC2
+       bool "VDEC2"
+
+config CHIP_OPSP
+       bool "OPSP"
+
+endchoice
+
+config MMU
+        bool "Support for memory management hardware"
+        depends on CHIP_M32700 || CHIP_VDEC2 || CHIP_OPSP
+        default y
+
+config TLB_ENTRIES
+       int "TLB Entries"
+       depends on CHIP_M32700 || CHIP_VDEC2 || CHIP_OPSP
+       default 32 if CHIP_M32700 || CHIP_OPSP
+       default 16 if CHIP_VDEC2
+
+
+config ISA_M32R
+        bool
+        depends on CHIP_M32102
+        default y
+
+config ISA_M32R2
+        bool
+        depends on CHIP_M32700 || CHIP_VDEC2 || CHIP_OPSP
+        default y
+
+config ISA_DSP_LEVEL2
+        bool
+        depends on CHIP_M32700 || CHIP_OPSP
+        default y
+
+config ISA_DUAL_ISSUE
+        bool
+        depends on CHIP_M32700 || CHIP_OPSP
+        default y
+
+config BUS_CLOCK
+        int "Bus Clock [Hz] (integer)"
+        default "70000000" if PLAT_MAPPI
+        default "25000000" if PLAT_USRV
+        default "50000000" if PLAT_M32700UT
+        default "50000000" if PLAT_OPSPUT
+        default "33333333" if PLAT_OAKS32R
+        default "20000000" if PLAT_MAPPI2
+
+config TIMER_DIVIDE
+        int "Timer divider (integer)"
+        default "128"
+
+config CPU_LITTLE_ENDIAN
+        bool "Generate little endian code"
+        default n
+
+config MEMORY_START
+        hex "Physical memory start address (hex)"
+        default "08000000" if PLAT_MAPPI || PLAT_MAPPI2
+        default "08000000" if PLAT_USRV
+        default "08000000" if PLAT_M32700UT
+        default "08000000" if PLAT_OPSPUT
+        default "01000000" if PLAT_OAKS32R
+
+config MEMORY_SIZE
+        hex "Physical memory size (hex)"
+        default "04000000" if PLAT_MAPPI || PLAT_MAPPI2
+        default "02000000" if PLAT_USRV
+        default "01000000" if PLAT_M32700UT
+        default "01000000" if PLAT_OPSPUT
+        default "00800000" if PLAT_OAKS32R
+
+config NOHIGHMEM
+        bool
+        default y
+
+config DISCONTIGMEM
+        bool "Internal RAM Support"
+        depends on CHIP_M32700 || CHIP_M32102 || CHIP_VDEC2 || CHIP_OPSP
+        default y
+
+config IRAM_START
+        hex "Internal memory start address (hex)"
+        default "00f00000"
+        depends on (CHIP_M32700 || CHIP_M32102 || CHIP_VDEC2 || CHIP_OPSP) && DISCONTIGMEM
+
+config IRAM_SIZE
+        hex "Internal memory size (hex)"
+        depends on (CHIP_M32700 || CHIP_M32102 || CHIP_VDEC2 || CHIP_OPSP) && DISCONTIGMEM
+        default "00080000" if CHIP_M32700
+        default "00010000" if CHIP_M32102 || CHIP_OPSP
+        default "00008000" if CHIP_VDEC2
+
+#
+# Define implied options from the CPU selection here
+#
+
+config RWSEM_GENERIC_SPINLOCK
+        bool
+        depends on M32R
+        default y
+
+config RWSEM_XCHGADD_ALGORITHM
+        bool
+        default n
+
+config GENERIC_CALIBRATE_DELAY
+        bool
+        default y
+
+config PREEMPT
+        bool "Preemptible Kernel"
+        help
+          This option reduces the latency of the kernel when reacting to
+          real-time or interactive events by allowing a low priority process to
+          be preempted even if it is in kernel mode executing a system call.
+          This allows applications to run more reliably even when the system is
+          under load.
+
+          Say Y here if you are building a kernel for a desktop, embedded
+          or real-time system.  Say N if you are unsure.
+
+config HAVE_DEC_LOCK
+        bool
+        depends on (SMP || PREEMPT)
+        default n
+
+config SMP
+        bool "Symmetric multi-processing support"
+        ---help---
+          This enables support for systems with more than one CPU. If you have
+          a system with only one CPU, like most personal computers, say N. If
+          you have a system with more than one CPU, say Y.
+
+          If you say N here, the kernel will run on single and multiprocessor
+          machines, but will use only one CPU of a multiprocessor machine. If
+          you say Y here, the kernel will run on many, but not all,
+          singleprocessor machines. On a singleprocessor machine, the kernel
+          will run faster if you say N here.
+
+          People using multiprocessor machines who say Y here should also say
+          Y to "Enhanced Real Time Clock Support", below. The "Advanced Power
+          Management" code will be disabled if you say Y here.
+
+          See also the <file:Documentation/smp.tex>,
+          <file:Documentation/smp.txt> and the SMP-HOWTO available at
+          <http://www.linuxdoc.org/docs.html#howto>.
+
+          If you don't know what to do here, say N.
+
+config CHIP_M32700_TS1
+        bool "Workaround code for the M32700 TS1 chip's bug"
+        depends on (CHIP_M32700 && SMP)
+        default n
+
+config NR_CPUS
+        int "Maximum number of CPUs (2-32)"
+        range 2 32
+        depends on SMP
+        default "2"
+        help
+          This allows you to specify the maximum number of CPUs which this
+          kernel will support.  The maximum supported value is 32 and the
+          minimum value which makes sense is 2.
+
+          This is purely to save memory - each supported CPU adds
+          approximately eight kilobytes to the kernel image.
+
+# Common NUMA Features
+config NUMA
+        bool "Numa Memory Allocation Support"
+        depends on SMP
+        default n
+
+# turning this on wastes a bunch of space.
+# Summit needs it only when NUMA is on
+config BOOT_IOREMAP
+        bool
+        depends on NUMA
+        default n
+
+endmenu
+
+
+menu "Bus options (PCI, PCMCIA, EISA, MCA, ISA)"
+
+config PCI
+        bool "PCI support"
+        default n
+        help
+          Find out whether you have a PCI motherboard. PCI is the name of a
+          bus system, i.e. the way the CPU talks to the other stuff inside
+          your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
+          VESA. If you have PCI, say Y, otherwise N.
+
+          The PCI-HOWTO, available from
+          <http://www.linuxdoc.org/docs.html#howto>, contains valuable
+          information about which PCI hardware does work under Linux and which
+          doesn't.
+
+choice
+        prompt "PCI access mode"
+        depends on PCI
+        default PCI_GOANY
+
+config PCI_GOBIOS
+        bool "BIOS"
+        ---help---
+          On PCI systems, the BIOS can be used to detect the PCI devices and
+          determine their configuration. However, some old PCI motherboards
+          have BIOS bugs and may crash if this is done. Also, some embedded
+          PCI-based systems don't have any BIOS at all. Linux can also try to
+          detect the PCI hardware directly without using the BIOS.
+
+          With this option, you can specify how Linux should detect the PCI
+          devices. If you choose "BIOS", the BIOS will be used, if you choose
+          "Direct", the BIOS won't be used, and if you choose "Any", the
+          kernel will try the direct access method and falls back to the BIOS
+          if that doesn't work. If unsure, go with the default, which is
+          "Any".
+
+config PCI_GODIRECT
+        bool "Direct"
+
+config PCI_GOANY
+        bool "Any"
+
+endchoice
+
+config PCI_BIOS
+        bool
+        depends on PCI && (PCI_GOBIOS || PCI_GOANY)
+        default y
+
+config PCI_DIRECT
+        bool
+        depends on PCI && (PCI_GODIRECT || PCI_GOANY)
+        default y
+
+source "drivers/pci/Kconfig"
+
+config ISA
+        bool "ISA support"
+        help
+          Find out whether you have ISA slots on your motherboard.  ISA is the
+          name of a bus system, i.e. the way the CPU talks to the other stuff
+          inside your box.  If you have ISA, say Y, otherwise N.
+
+source "drivers/pcmcia/Kconfig"
+
+source "drivers/pci/hotplug/Kconfig"
+
+endmenu
+
+
+menu "Executable file formats"
+
+source "fs/Kconfig.binfmt"
+
+endmenu
+
+source "drivers/Kconfig"
+
+source "fs/Kconfig"
+
+source "arch/m32r/oprofile/Kconfig"
+
+source "arch/m32r/Kconfig.debug"
+
+source "security/Kconfig"
+
+source "crypto/Kconfig"
+
+source "lib/Kconfig"