4 files changed, 345 insertions, 337 deletions
diff --git a/arch/i386/Kconfig b/arch/i386/Kconfig
index 35d3cff30057..5383e5e2d9b7 100644
--- a/arch/i386/Kconfig
+++ b/arch/i386/Kconfig
@@ -155,309 +155,7 @@ config ES7000_CLUSTERED_APIC
        default y
        depends on SMP && X86_ES7000 && MPENTIUMIII
-if !X86_ELAN
+source "arch/i386/Kconfig.cpu"
-choice
-        prompt "Processor family"
-        default M686
-config M386
-        bool "386"
-        ---help---
-          This is the processor type of your CPU. This information is used for
-          optimizing purposes. In order to compile a kernel that can run on
-          all x86 CPU types (albeit not optimally fast), you can specify
-          "386" here.
-          The kernel will not necessarily run on earlier architectures than
-          the one you have chosen, e.g. a Pentium optimized kernel will run on
-          a PPro, but not necessarily on a i486.
-          Here are the settings recommended for greatest speed:
-          - "386" for the AMD/Cyrix/Intel 386DX/DXL/SL/SLC/SX, Cyrix/TI
-          486DLC/DLC2, UMC 486SX-S and NexGen Nx586.  Only "386" kernels
-          will run on a 386 class machine.
-          - "486" for the AMD/Cyrix/IBM/Intel 486DX/DX2/DX4 or
-          SL/SLC/SLC2/SLC3/SX/SX2 and UMC U5D or U5S.
-          - "586" for generic Pentium CPUs lacking the TSC
-          (time stamp counter) register.
-          - "Pentium-Classic" for the Intel Pentium.
-          - "Pentium-MMX" for the Intel Pentium MMX.
-          - "Pentium-Pro" for the Intel Pentium Pro.
-          - "Pentium-II" for the Intel Pentium II or pre-Coppermine Celeron.
-          - "Pentium-III" for the Intel Pentium III or Coppermine Celeron.
-          - "Pentium-4" for the Intel Pentium 4 or P4-based Celeron.
-          - "K6" for the AMD K6, K6-II and K6-III (aka K6-3D).
-          - "Athlon" for the AMD K7 family (Athlon/Duron/Thunderbird).
-          - "Crusoe" for the Transmeta Crusoe series.
-          - "Efficeon" for the Transmeta Efficeon series.
-          - "Winchip-C6" for original IDT Winchip.
-          - "Winchip-2" for IDT Winchip 2.
-          - "Winchip-2A" for IDT Winchips with 3dNow! capabilities.
-          - "GeodeGX1" for Geode GX1 (Cyrix MediaGX).
-          - "CyrixIII/VIA C3" for VIA Cyrix III or VIA C3.
-          - "VIA C3-2 for VIA C3-2 "Nehemiah" (model 9 and above).
-          If you don't know what to do, choose "386".
-config M486
-        bool "486"
-        help
-          Select this for a 486 series processor, either Intel or one of the
-          compatible processors from AMD, Cyrix, IBM, or Intel.  Includes DX,
-          DX2, and DX4 variants; also SL/SLC/SLC2/SLC3/SX/SX2 and UMC U5D or
-          U5S.
-config M586
-        bool "586/K5/5x86/6x86/6x86MX"
-        help
-          Select this for an 586 or 686 series processor such as the AMD K5,
-          the Cyrix 5x86, 6x86 and 6x86MX.  This choice does not
-          assume the RDTSC (Read Time Stamp Counter) instruction.
-config M586TSC
-        bool "Pentium-Classic"
-        help
-          Select this for a Pentium Classic processor with the RDTSC (Read
-          Time Stamp Counter) instruction for benchmarking.
-config M586MMX
-        bool "Pentium-MMX"
-        help
-          Select this for a Pentium with the MMX graphics/multimedia
-          extended instructions.
-config M686
-        bool "Pentium-Pro"
-        help
-          Select this for Intel Pentium Pro chips.  This enables the use of
-          Pentium Pro extended instructions, and disables the init-time guard
-          against the f00f bug found in earlier Pentiums.
-config MPENTIUMII
-        bool "Pentium-II/Celeron(pre-Coppermine)"
-        help
-          Select this for Intel chips based on the Pentium-II and
-          pre-Coppermine Celeron core.  This option enables an unaligned
-          copy optimization, compiles the kernel with optimization flags
-          tailored for the chip, and applies any applicable Pentium Pro
-          optimizations.
-config MPENTIUMIII
-        bool "Pentium-III/Celeron(Coppermine)/Pentium-III Xeon"
-        help
-          Select this for Intel chips based on the Pentium-III and
-          Celeron-Coppermine core.  This option enables use of some
-          extended prefetch instructions in addition to the Pentium II
-          extensions.
-config MPENTIUMM
-        bool "Pentium M"
-        help
-          Select this for Intel Pentium M (not Pentium-4 M)
-          notebook chips.
-config MPENTIUM4
-        bool "Pentium-4/Celeron(P4-based)/Pentium-4 M/Xeon"
-        help
-          Select this for Intel Pentium 4 chips.  This includes the
-          Pentium 4, P4-based Celeron and Xeon, and Pentium-4 M
-          (not Pentium M) chips.  This option enables compile flags
-          optimized for the chip, uses the correct cache shift, and
-          applies any applicable Pentium III optimizations.
-config MK6
-        bool "K6/K6-II/K6-III"
-        help
-          Select this for an AMD K6-family processor.  Enables use of
-          some extended instructions, and passes appropriate optimization
-          flags to GCC.
-config MK7
-        bool "Athlon/Duron/K7"
-        help
-          Select this for an AMD Athlon K7-family processor.  Enables use of
-          some extended instructions, and passes appropriate optimization
-          flags to GCC.
-config MK8
-        bool "Opteron/Athlon64/Hammer/K8"
-        help
-          Select this for an AMD Opteron or Athlon64 Hammer-family processor.  Enables
-          use of some extended instructions, and passes appropriate optimization
-          flags to GCC.
-config MCRUSOE
-        bool "Crusoe"
-        help
-          Select this for a Transmeta Crusoe processor.  Treats the processor
-          like a 586 with TSC, and sets some GCC optimization flags (like a
-          Pentium Pro with no alignment requirements).
-config MEFFICEON
-        bool "Efficeon"
-        help
-          Select this for a Transmeta Efficeon processor.
-config MWINCHIPC6
-        bool "Winchip-C6"
-        help
-          Select this for an IDT Winchip C6 chip.  Linux and GCC
-          treat this chip as a 586TSC with some extended instructions
-          and alignment requirements.
-config MWINCHIP2
-        bool "Winchip-2"
-        help
-          Select this for an IDT Winchip-2.  Linux and GCC
-          treat this chip as a 586TSC with some extended instructions
-          and alignment requirements.
-config MWINCHIP3D
-        bool "Winchip-2A/Winchip-3"
-        help
-          Select this for an IDT Winchip-2A or 3.  Linux and GCC
-          treat this chip as a 586TSC with some extended instructions
-          and alignment reqirements.  Also enable out of order memory
-          stores for this CPU, which can increase performance of some
-          operations.
-config MGEODEGX1
-        bool "GeodeGX1"
-        help
-          Select this for a Geode GX1 (Cyrix MediaGX) chip.
-config MCYRIXIII
-        bool "CyrixIII/VIA-C3"
-        help
-          Select this for a Cyrix III or C3 chip.  Presently Linux and GCC
-          treat this chip as a generic 586. Whilst the CPU is 686 class,
-          it lacks the cmov extension which gcc assumes is present when
-          generating 686 code.
-          Note that Nehemiah (Model 9) and above will not boot with this
-          kernel due to them lacking the 3DNow! instructions used in earlier
-          incarnations of the CPU.
-config MVIAC3_2
-        bool "VIA C3-2 (Nehemiah)"
-        help
-          Select this for a VIA C3 "Nehemiah". Selecting this enables usage
-          of SSE and tells gcc to treat the CPU as a 686.
-          Note, this kernel will not boot on older (pre model 9) C3s.
-endchoice
-config X86_GENERIC
-       bool "Generic x86 support"
-       help
-          Instead of just including optimizations for the selected
-          x86 variant (e.g. PII, Crusoe or Athlon), include some more
-          generic optimizations as well. This will make the kernel
-          perform better on x86 CPUs other than that selected.
-          This is really intended for distributors who need more
-          generic optimizations.
-endif
-#
-# Define implied options from the CPU selection here
-#
-config X86_CMPXCHG
-        bool
-        depends on !M386
-        default y
-config X86_XADD
-        bool
-        depends on !M386
-        default y
-config X86_L1_CACHE_SHIFT
-        int
-        default "7" if MPENTIUM4 || X86_GENERIC
-        default "4" if X86_ELAN || M486 || M386
-        default "5" if MWINCHIP3D || MWINCHIP2 || MWINCHIPC6 || MCRUSOE || MEFFICEON || MCYRIXIII || MK6 || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || M586 || MVIAC3_2 || MGEODEGX1
-        default "6" if MK7 || MK8 || MPENTIUMM
-config RWSEM_GENERIC_SPINLOCK
-        bool
-        depends on M386
-        default y
-config RWSEM_XCHGADD_ALGORITHM
-        bool
-        depends on !M386
-        default y
-config GENERIC_CALIBRATE_DELAY
-        bool
-        default y
-config X86_PPRO_FENCE
-        bool
-        depends on M686 || M586MMX || M586TSC || M586 || M486 || M386 || MGEODEGX1
-        default y
-config X86_F00F_BUG
-        bool
-        depends on M586MMX || M586TSC || M586 || M486 || M386
-        default y
-config X86_WP_WORKS_OK
-        bool
-        depends on !M386
-        default y
-config X86_INVLPG
-        bool
-        depends on !M386
-        default y
-config X86_BSWAP
-        bool
-        depends on !M386
-        default y
-config X86_POPAD_OK
-        bool
-        depends on !M386
-        default y
-config X86_CMPXCHG64
-        bool
-        depends on !M386 && !M486
-        default y
-config X86_ALIGNMENT_16
-        bool
-        depends on MWINCHIP3D || MWINCHIP2 || MWINCHIPC6 || MCYRIXIII || X86_ELAN || MK6 || M586MMX || M586TSC || M586 || M486 || MVIAC3_2 || MGEODEGX1
-        default y
-config X86_GOOD_APIC
-        bool
-        depends on MK7 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || MK8 || MEFFICEON
-        default y
-config X86_INTEL_USERCOPY
-        bool
-        depends on MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M586MMX || X86_GENERIC || MK8 || MK7 || MEFFICEON
-        default y
-config X86_USE_PPRO_CHECKSUM
-        bool
-        depends on MWINCHIP3D || MWINCHIP2 || MWINCHIPC6 || MCYRIXIII || MK7 || MK6 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || MK8 || MVIAC3_2 || MEFFICEON
-        default y
-config X86_USE_3DNOW
-        bool
-        depends on MCYRIXIII || MK7
-        default y
-config X86_OOSTORE
-        bool
-        depends on (MWINCHIP3D || MWINCHIP2 || MWINCHIPC6) && MTRR
-        default y
 config HPET_TIMER
        bool "HPET Timer Support"
@@ -570,11 +268,6 @@ config X86_VISWS_APIC
        depends on X86_VISWS
        default y
-config X86_TSC
-        bool
-        depends on (MWINCHIP3D || MWINCHIP2 || MCRUSOE || MEFFICEON || MCYRIXIII || MK7 || MK6 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || MK8 || MVIAC3_2 || MGEODEGX1) && !X86_NUMAQ
-        default y
 config X86_MCE
        bool "Machine Check Exception"
        depends on !X86_VOYAGER
diff --git a/arch/i386/Kconfig.cpu b/arch/i386/Kconfig.cpu
new file mode 100644
index 000000000000..53bbb3c008ee
--- /dev/null
+++ b/arch/i386/Kconfig.cpu
@@ -0,0 +1,309 @@
+# Put here option for CPU selection and depending optimization
+if !X86_ELAN
+choice
+        prompt "Processor family"
+        default M686
+config M386
+        bool "386"
+        ---help---
+          This is the processor type of your CPU. This information is used for
+          optimizing purposes. In order to compile a kernel that can run on
+          all x86 CPU types (albeit not optimally fast), you can specify
+          "386" here.
+          The kernel will not necessarily run on earlier architectures than
+          the one you have chosen, e.g. a Pentium optimized kernel will run on
+          a PPro, but not necessarily on a i486.
+          Here are the settings recommended for greatest speed:
+          - "386" for the AMD/Cyrix/Intel 386DX/DXL/SL/SLC/SX, Cyrix/TI
+          486DLC/DLC2, UMC 486SX-S and NexGen Nx586.  Only "386" kernels
+          will run on a 386 class machine.
+          - "486" for the AMD/Cyrix/IBM/Intel 486DX/DX2/DX4 or
+          SL/SLC/SLC2/SLC3/SX/SX2 and UMC U5D or U5S.
+          - "586" for generic Pentium CPUs lacking the TSC
+          (time stamp counter) register.
+          - "Pentium-Classic" for the Intel Pentium.
+          - "Pentium-MMX" for the Intel Pentium MMX.
+          - "Pentium-Pro" for the Intel Pentium Pro.
+          - "Pentium-II" for the Intel Pentium II or pre-Coppermine Celeron.
+          - "Pentium-III" for the Intel Pentium III or Coppermine Celeron.
+          - "Pentium-4" for the Intel Pentium 4 or P4-based Celeron.
+          - "K6" for the AMD K6, K6-II and K6-III (aka K6-3D).
+          - "Athlon" for the AMD K7 family (Athlon/Duron/Thunderbird).
+          - "Crusoe" for the Transmeta Crusoe series.
+          - "Efficeon" for the Transmeta Efficeon series.
+          - "Winchip-C6" for original IDT Winchip.
+          - "Winchip-2" for IDT Winchip 2.
+          - "Winchip-2A" for IDT Winchips with 3dNow! capabilities.
+          - "GeodeGX1" for Geode GX1 (Cyrix MediaGX).
+          - "CyrixIII/VIA C3" for VIA Cyrix III or VIA C3.
+          - "VIA C3-2 for VIA C3-2 "Nehemiah" (model 9 and above).
+          If you don't know what to do, choose "386".
+config M486
+        bool "486"
+        help
+          Select this for a 486 series processor, either Intel or one of the
+          compatible processors from AMD, Cyrix, IBM, or Intel.  Includes DX,
+          DX2, and DX4 variants; also SL/SLC/SLC2/SLC3/SX/SX2 and UMC U5D or
+          U5S.
+config M586
+        bool "586/K5/5x86/6x86/6x86MX"
+        help
+          Select this for an 586 or 686 series processor such as the AMD K5,
+          the Cyrix 5x86, 6x86 and 6x86MX.  This choice does not
+          assume the RDTSC (Read Time Stamp Counter) instruction.
+config M586TSC
+        bool "Pentium-Classic"
+        help
+          Select this for a Pentium Classic processor with the RDTSC (Read
+          Time Stamp Counter) instruction for benchmarking.
+config M586MMX
+        bool "Pentium-MMX"
+        help
+          Select this for a Pentium with the MMX graphics/multimedia
+          extended instructions.
+config M686
+        bool "Pentium-Pro"
+        help
+          Select this for Intel Pentium Pro chips.  This enables the use of
+          Pentium Pro extended instructions, and disables the init-time guard
+          against the f00f bug found in earlier Pentiums.
+config MPENTIUMII
+        bool "Pentium-II/Celeron(pre-Coppermine)"
+        help
+          Select this for Intel chips based on the Pentium-II and
+          pre-Coppermine Celeron core.  This option enables an unaligned
+          copy optimization, compiles the kernel with optimization flags
+          tailored for the chip, and applies any applicable Pentium Pro
+          optimizations.
+config MPENTIUMIII
+        bool "Pentium-III/Celeron(Coppermine)/Pentium-III Xeon"
+        help
+          Select this for Intel chips based on the Pentium-III and
+          Celeron-Coppermine core.  This option enables use of some
+          extended prefetch instructions in addition to the Pentium II
+          extensions.
+config MPENTIUMM
+        bool "Pentium M"
+        help
+          Select this for Intel Pentium M (not Pentium-4 M)
+          notebook chips.
+config MPENTIUM4
+        bool "Pentium-4/Celeron(P4-based)/Pentium-4 M/Xeon"
+        help
+          Select this for Intel Pentium 4 chips.  This includes the
+          Pentium 4, P4-based Celeron and Xeon, and Pentium-4 M
+          (not Pentium M) chips.  This option enables compile flags
+          optimized for the chip, uses the correct cache shift, and
+          applies any applicable Pentium III optimizations.
+config MK6
+        bool "K6/K6-II/K6-III"
+        help
+          Select this for an AMD K6-family processor.  Enables use of
+          some extended instructions, and passes appropriate optimization
+          flags to GCC.
+config MK7
+        bool "Athlon/Duron/K7"
+        help
+          Select this for an AMD Athlon K7-family processor.  Enables use of
+          some extended instructions, and passes appropriate optimization
+          flags to GCC.
+config MK8
+        bool "Opteron/Athlon64/Hammer/K8"
+        help
+          Select this for an AMD Opteron or Athlon64 Hammer-family processor.  Enables
+          use of some extended instructions, and passes appropriate optimization
+          flags to GCC.
+config MCRUSOE
+        bool "Crusoe"
+        help
+          Select this for a Transmeta Crusoe processor.  Treats the processor
+          like a 586 with TSC, and sets some GCC optimization flags (like a
+          Pentium Pro with no alignment requirements).
+config MEFFICEON
+        bool "Efficeon"
+        help
+          Select this for a Transmeta Efficeon processor.
+config MWINCHIPC6
+        bool "Winchip-C6"
+        help
+          Select this for an IDT Winchip C6 chip.  Linux and GCC
+          treat this chip as a 586TSC with some extended instructions
+          and alignment requirements.
+config MWINCHIP2
+        bool "Winchip-2"
+        help
+          Select this for an IDT Winchip-2.  Linux and GCC
+          treat this chip as a 586TSC with some extended instructions
+          and alignment requirements.
+config MWINCHIP3D
+        bool "Winchip-2A/Winchip-3"
+        help
+          Select this for an IDT Winchip-2A or 3.  Linux and GCC
+          treat this chip as a 586TSC with some extended instructions
+          and alignment reqirements.  Also enable out of order memory
+          stores for this CPU, which can increase performance of some
+          operations.
+config MGEODEGX1
+        bool "GeodeGX1"
+        help
+          Select this for a Geode GX1 (Cyrix MediaGX) chip.
+config MCYRIXIII
+        bool "CyrixIII/VIA-C3"
+        help
+          Select this for a Cyrix III or C3 chip.  Presently Linux and GCC
+          treat this chip as a generic 586. Whilst the CPU is 686 class,
+          it lacks the cmov extension which gcc assumes is present when
+          generating 686 code.
+          Note that Nehemiah (Model 9) and above will not boot with this
+          kernel due to them lacking the 3DNow! instructions used in earlier
+          incarnations of the CPU.
+config MVIAC3_2
+        bool "VIA C3-2 (Nehemiah)"
+        help
+          Select this for a VIA C3 "Nehemiah". Selecting this enables usage
+          of SSE and tells gcc to treat the CPU as a 686.
+          Note, this kernel will not boot on older (pre model 9) C3s.
+endchoice
+config X86_GENERIC
+       bool "Generic x86 support"
+       help
+          Instead of just including optimizations for the selected
+          x86 variant (e.g. PII, Crusoe or Athlon), include some more
+          generic optimizations as well. This will make the kernel
+          perform better on x86 CPUs other than that selected.
+          This is really intended for distributors who need more
+          generic optimizations.
+endif
+#
+# Define implied options from the CPU selection here
+#
+config X86_CMPXCHG
+        bool
+        depends on !M386
+        default y
+config X86_XADD
+        bool
+        depends on !M386
+        default y
+config X86_L1_CACHE_SHIFT
+        int
+        default "7" if MPENTIUM4 || X86_GENERIC
+        default "4" if X86_ELAN || M486 || M386
+        default "5" if MWINCHIP3D || MWINCHIP2 || MWINCHIPC6 || MCRUSOE || MEFFICEON || MCYRIXIII || MK6 || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || M586 || MVIAC3_2 || MGEODEGX1
+        default "6" if MK7 || MK8 || MPENTIUMM
+config RWSEM_GENERIC_SPINLOCK
+        bool
+        depends on M386
+        default y
+config RWSEM_XCHGADD_ALGORITHM
+        bool
+        depends on !M386
+        default y
+config GENERIC_CALIBRATE_DELAY
+        bool
+        default y
+config X86_PPRO_FENCE
+        bool
+        depends on M686 || M586MMX || M586TSC || M586 || M486 || M386 || MGEODEGX1
+        default y
+config X86_F00F_BUG
+        bool
+        depends on M586MMX || M586TSC || M586 || M486 || M386
+        default y
+config X86_WP_WORKS_OK
+        bool
+        depends on !M386
+        default y
+config X86_INVLPG
+        bool
+        depends on !M386
+        default y
+config X86_BSWAP
+        bool
+        depends on !M386
+        default y
+config X86_POPAD_OK
+        bool
+        depends on !M386
+        default y
+config X86_CMPXCHG64
+        bool
+        depends on !M386 && !M486
+        default y
+config X86_ALIGNMENT_16
+        bool
+        depends on MWINCHIP3D || MWINCHIP2 || MWINCHIPC6 || MCYRIXIII || X86_ELAN || MK6 || M586MMX || M586TSC || M586 || M486 || MVIAC3_2 || MGEODEGX1
+        default y
+config X86_GOOD_APIC
+        bool
+        depends on MK7 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || MK8 || MEFFICEON
+        default y
+config X86_INTEL_USERCOPY
+        bool
+        depends on MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M586MMX || X86_GENERIC || MK8 || MK7 || MEFFICEON
+        default y
+config X86_USE_PPRO_CHECKSUM
+        bool
+        depends on MWINCHIP3D || MWINCHIP2 || MWINCHIPC6 || MCYRIXIII || MK7 || MK6 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || MK8 || MVIAC3_2 || MEFFICEON
+        default y
+config X86_USE_3DNOW
+        bool
+        depends on MCYRIXIII || MK7
+        default y
+config X86_OOSTORE
+        bool
+        depends on (MWINCHIP3D || MWINCHIP2 || MWINCHIPC6) && MTRR
+        default y
+config X86_TSC
+        bool
+        depends on (MWINCHIP3D || MWINCHIP2 || MCRUSOE || MEFFICEON || MCYRIXIII || MK7 || MK6 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || MK8 || MVIAC3_2 || MGEODEGX1) && !X86_NUMAQ
+        default y
diff --git a/arch/i386/Makefile b/arch/i386/Makefile
index 09951990a622..d121ea18460f 100644
--- a/arch/i386/Makefile
+++ b/arch/i386/Makefile
@@ -34,35 +34,8 @@ CFLAGS += -pipe -msoft-float
 # prevent gcc from keeping the stack 16 byte aligned
 CFLAGS += $(call cc-option,-mpreferred-stack-boundary=2)
-align := $(cc-option-align)
+# CPU-specific tuning. Anything which can be shared with UML should go here.
-cflags-$(CONFIG_M386)           += -march=i386
+include $(srctree)/arch/i386/Makefile.cpu
-cflags-$(CONFIG_M486)           += -march=i486
-cflags-$(CONFIG_M586)           += -march=i586
-cflags-$(CONFIG_M586TSC)        += -march=i586
-cflags-$(CONFIG_M586MMX)        += $(call cc-option,-march=pentium-mmx,-march=i586)
-cflags-$(CONFIG_M686)           += -march=i686
-cflags-$(CONFIG_MPENTIUMII)     += -march=i686 $(call cc-option,-mtune=pentium2)
-cflags-$(CONFIG_MPENTIUMIII)    += -march=i686 $(call cc-option,-mtune=pentium3)
-cflags-$(CONFIG_MPENTIUMM)      += -march=i686 $(call cc-option,-mtune=pentium3)
-cflags-$(CONFIG_MPENTIUM4)      += -march=i686 $(call cc-option,-mtune=pentium4)
-cflags-$(CONFIG_MK6)            += -march=k6
-# Please note, that patches that add -march=athlon-xp and friends are pointless.
-# They make zero difference whatsosever to performance at this time.
-cflags-$(CONFIG_MK7)            += $(call cc-option,-march=athlon,-march=i686 $(align)-functions=4)
-cflags-$(CONFIG_MK8)            += $(call cc-option,-march=k8,$(call cc-option,-march=athlon,-march=i686 $(align)-functions=4))
-cflags-$(CONFIG_MCRUSOE)        += -march=i686 $(align)-functions=0 $(align)-jumps=0 $(align)-loops=0
-cflags-$(CONFIG_MEFFICEON)      += -march=i686 $(call cc-option,-mtune=pentium3) $(align)-functions=0 $(align)-jumps=0 $(align)-loops=0
-cflags-$(CONFIG_MWINCHIPC6)     += $(call cc-option,-march=winchip-c6,-march=i586)
-cflags-$(CONFIG_MWINCHIP2)      += $(call cc-option,-march=winchip2,-march=i586)
-cflags-$(CONFIG_MWINCHIP3D)     += $(call cc-option,-march=winchip2,-march=i586)
-cflags-$(CONFIG_MCYRIXIII)      += $(call cc-option,-march=c3,-march=i486) $(align)-functions=0 $(align)-jumps=0 $(align)-loops=0
-cflags-$(CONFIG_MVIAC3_2)       += $(call cc-option,-march=c3-2,-march=i686)
-# AMD Elan support
-cflags-$(CONFIG_X86_ELAN)       += -march=i486
-# Geode GX1 support
-cflags-$(CONFIG_MGEODEGX1)              += $(call cc-option,-march=pentium-mmx,-march=i486)
 # -mregparm=3 works ok on gcc-3.0 and later
 #
diff --git a/arch/i386/Makefile.cpu b/arch/i386/Makefile.cpu
new file mode 100644
index 000000000000..86c7bb1b95e5
--- /dev/null
+++ b/arch/i386/Makefile.cpu
@@ -0,0 +1,33 @@
+# CPU tuning section - shared with UML.
+# Must change only cflags-y (or [yn]), not CFLAGS! That makes a difference for UML.
+align := $(cc-option-align)
+cflags-$(CONFIG_M386)           += -march=i386
+cflags-$(CONFIG_M486)           += -march=i486
+cflags-$(CONFIG_M586)           += -march=i586
+cflags-$(CONFIG_M586TSC)        += -march=i586
+cflags-$(CONFIG_M586MMX)        += $(call cc-option,-march=pentium-mmx,-march=i586)
+cflags-$(CONFIG_M686)           += -march=i686
+cflags-$(CONFIG_MPENTIUMII)     += -march=i686 $(call cc-option,-mtune=pentium2)
+cflags-$(CONFIG_MPENTIUMIII)    += -march=i686 $(call cc-option,-mtune=pentium3)
+cflags-$(CONFIG_MPENTIUMM)      += -march=i686 $(call cc-option,-mtune=pentium3)
+cflags-$(CONFIG_MPENTIUM4)      += -march=i686 $(call cc-option,-mtune=pentium4)
+cflags-$(CONFIG_MK6)            += -march=k6
+# Please note, that patches that add -march=athlon-xp and friends are pointless.
+# They make zero difference whatsosever to performance at this time.
+cflags-$(CONFIG_MK7)            += $(call cc-option,-march=athlon,-march=i686 $(align)-functions=4)
+cflags-$(CONFIG_MK8)            += $(call cc-option,-march=k8,$(call cc-option,-march=athlon,-march=i686 $(align)-functions=4))
+cflags-$(CONFIG_MCRUSOE)        += -march=i686 $(align)-functions=0 $(align)-jumps=0 $(align)-loops=0
+cflags-$(CONFIG_MEFFICEON)      += -march=i686 $(call cc-option,-mtune=pentium3) $(align)-functions=0 $(align)-jumps=0 $(align)-loops=0
+cflags-$(CONFIG_MWINCHIPC6)     += $(call cc-option,-march=winchip-c6,-march=i586)
+cflags-$(CONFIG_MWINCHIP2)      += $(call cc-option,-march=winchip2,-march=i586)
+cflags-$(CONFIG_MWINCHIP3D)     += $(call cc-option,-march=winchip2,-march=i586)
+cflags-$(CONFIG_MCYRIXIII)      += $(call cc-option,-march=c3,-march=i486) $(align)-functions=0 $(align)-jumps=0 $(align)-loops=0
+cflags-$(CONFIG_MVIAC3_2)       += $(call cc-option,-march=c3-2,-march=i686)
+# AMD Elan support
+cflags-$(CONFIG_X86_ELAN)       += -march=i486
+# Geode GX1 support
+cflags-$(CONFIG_MGEODEGX1)              += $(call cc-option,-march=pentium-mmx,-march=i486)