1 files changed, 106 insertions, 0 deletions

diff --git a/arch/i386/mach-default/setup.c b/arch/i386/mach-default/setup.c
new file mode 100644
index 000000000000..0aa08eaa8932
--- /dev/null
+++ b/arch/i386/mach-default/setup.c
@@ -0,0 +1,106 @@
+/*
+ *      Machine specific setup for generic
+ */
+
+#include <linux/config.h>
+#include <linux/smp.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <asm/acpi.h>
+#include <asm/arch_hooks.h>
+
+/**
+ * pre_intr_init_hook - initialisation prior to setting up interrupt vectors
+ *
+ * Description:
+ *      Perform any necessary interrupt initialisation prior to setting up
+ *      the "ordinary" interrupt call gates.  For legacy reasons, the ISA
+ *      interrupts should be initialised here if the machine emulates a PC
+ *      in any way.
+ **/
+void __init pre_intr_init_hook(void)
+{
+        init_ISA_irqs();
+}
+
+/*
+ * IRQ2 is cascade interrupt to second interrupt controller
+ */
+static struct irqaction irq2 = { no_action, 0, CPU_MASK_NONE, "cascade", NULL, NULL};
+
+/**
+ * intr_init_hook - post gate setup interrupt initialisation
+ *
+ * Description:
+ *      Fill in any interrupts that may have been left out by the general
+ *      init_IRQ() routine.  interrupts having to do with the machine rather
+ *      than the devices on the I/O bus (like APIC interrupts in intel MP
+ *      systems) are started here.
+ **/
+void __init intr_init_hook(void)
+{
+#ifdef CONFIG_X86_LOCAL_APIC
+        apic_intr_init();
+#endif
+
+        if (!acpi_ioapic)
+                setup_irq(2, &irq2);
+}
+
+/**
+ * pre_setup_arch_hook - hook called prior to any setup_arch() execution
+ *
+ * Description:
+ *      generally used to activate any machine specific identification
+ *      routines that may be needed before setup_arch() runs.  On VISWS
+ *      this is used to get the board revision and type.
+ **/
+void __init pre_setup_arch_hook(void)
+{
+}
+
+/**
+ * trap_init_hook - initialise system specific traps
+ *
+ * Description:
+ *      Called as the final act of trap_init().  Used in VISWS to initialise
+ *      the various board specific APIC traps.
+ **/
+void __init trap_init_hook(void)
+{
+}
+
+static struct irqaction irq0  = { timer_interrupt, SA_INTERRUPT, CPU_MASK_NONE, "timer", NULL, NULL};
+
+/**
+ * time_init_hook - do any specific initialisations for the system timer.
+ *
+ * Description:
+ *      Must plug the system timer interrupt source at HZ into the IRQ listed
+ *      in irq_vectors.h:TIMER_IRQ
+ **/
+void __init time_init_hook(void)
+{
+        setup_irq(0, &irq0);
+}
+
+#ifdef CONFIG_MCA
+/**
+ * mca_nmi_hook - hook into MCA specific NMI chain
+ *
+ * Description:
+ *      The MCA (Microchannel Arcitecture) has an NMI chain for NMI sources
+ *      along the MCA bus.  Use this to hook into that chain if you will need
+ *      it.
+ **/
+void __init mca_nmi_hook(void)
+{
+        /* If I recall correctly, there's a whole bunch of other things that
+         * we can do to check for NMI problems, but that's all I know about
+         * at the moment.
+         */
+
+        printk("NMI generated from unknown source!\n");
+}
+#endif