1 files changed, 231 insertions, 0 deletions

diff --git a/arch/i386/kernel/cpu/cpufreq/Kconfig b/arch/i386/kernel/cpu/cpufreq/Kconfig
new file mode 100644
index 000000000000..f25ffd74235c
--- /dev/null
+++ b/arch/i386/kernel/cpu/cpufreq/Kconfig
@@ -0,0 +1,231 @@
+#
+# CPU Frequency scaling
+#
+
+menu "CPU Frequency scaling"
+
+source "drivers/cpufreq/Kconfig"
+
+if CPU_FREQ
+
+comment "CPUFreq processor drivers"
+
+config X86_ACPI_CPUFREQ
+        tristate "ACPI Processor P-States driver"
+        select CPU_FREQ_TABLE
+        depends on ACPI_PROCESSOR
+        help
+          This driver adds a CPUFreq driver which utilizes the ACPI
+          Processor Performance States.
+
+          For details, take a look at <file:Documentation/cpu-freq/>.
+
+          If in doubt, say N.
+
+config ELAN_CPUFREQ
+        tristate "AMD Elan"
+        select CPU_FREQ_TABLE
+        depends on X86_ELAN
+        ---help---
+          This adds the CPUFreq driver for AMD Elan SC400 and SC410
+          processors.
+
+          You need to specify the processor maximum speed as boot
+          parameter: elanfreq=maxspeed (in kHz) or as module
+          parameter "max_freq".
+
+          For details, take a look at <file:Documentation/cpu-freq/>.
+
+          If in doubt, say N.
+
+config X86_POWERNOW_K6
+        tristate "AMD Mobile K6-2/K6-3 PowerNow!"
+        select CPU_FREQ_TABLE
+        help
+          This adds the CPUFreq driver for mobile AMD K6-2+ and mobile
+          AMD K6-3+ processors.
+
+          For details, take a look at <file:Documentation/cpu-freq/>.
+
+          If in doubt, say N.
+
+config X86_POWERNOW_K7
+        tristate "AMD Mobile Athlon/Duron PowerNow!"
+        select CPU_FREQ_TABLE
+        help
+          This adds the CPUFreq driver for mobile AMD K7 mobile processors.
+
+          For details, take a look at <file:Documentation/cpu-freq/>.
+
+          If in doubt, say N.
+
+config X86_POWERNOW_K7_ACPI
+        bool
+        depends on X86_POWERNOW_K7 && ACPI_PROCESSOR
+        depends on !(X86_POWERNOW_K7 = y && ACPI_PROCESSOR = m)
+        default y
+
+config X86_POWERNOW_K8
+        tristate "AMD Opteron/Athlon64 PowerNow!"
+        select CPU_FREQ_TABLE
+        depends on EXPERIMENTAL
+        help
+          This adds the CPUFreq driver for mobile AMD Opteron/Athlon64 processors.
+
+          For details, take a look at <file:Documentation/cpu-freq/>.
+
+          If in doubt, say N.
+
+config X86_POWERNOW_K8_ACPI
+        bool
+        depends on X86_POWERNOW_K8 && ACPI_PROCESSOR
+        depends on !(X86_POWERNOW_K8 = y && ACPI_PROCESSOR = m)
+        default y
+
+config X86_GX_SUSPMOD
+        tristate "Cyrix MediaGX/NatSemi Geode Suspend Modulation"
+        help
+         This add the CPUFreq driver for NatSemi Geode processors which
+         support suspend modulation.
+
+         For details, take a look at <file:Documentation/cpu-freq/>.
+
+         If in doubt, say N.
+
+config X86_SPEEDSTEP_CENTRINO
+        tristate "Intel Enhanced SpeedStep"
+        select CPU_FREQ_TABLE
+        select X86_SPEEDSTEP_CENTRINO_TABLE if (!X86_SPEEDSTEP_CENTRINO_ACPI)
+        help
+          This adds the CPUFreq driver for Enhanced SpeedStep enabled
+          mobile CPUs.  This means Intel Pentium M (Centrino) CPUs. However,
+          you also need to say Y to "Use ACPI tables to decode..." below
+          [which might imply enabling ACPI] if you want to use this driver
+          on non-Banias CPUs.
+          
+          For details, take a look at <file:Documentation/cpu-freq/>.
+          
+          If in doubt, say N.
+
+config X86_SPEEDSTEP_CENTRINO_ACPI
+        bool "Use ACPI tables to decode valid frequency/voltage pairs"
+        depends on X86_SPEEDSTEP_CENTRINO && ACPI_PROCESSOR
+        depends on !(X86_SPEEDSTEP_CENTRINO = y && ACPI_PROCESSOR = m)
+        default y
+        help
+          Use primarily the information provided in the BIOS ACPI tables
+          to determine valid CPU frequency and voltage pairings. It is
+          required for the driver to work on non-Banias CPUs.
+
+          If in doubt, say Y.
+
+config X86_SPEEDSTEP_CENTRINO_TABLE
+        bool "Built-in tables for Banias CPUs"
+        depends on X86_SPEEDSTEP_CENTRINO
+        default y
+        help
+          Use built-in tables for Banias CPUs if ACPI encoding
+          is not available.
+
+          If in doubt, say N.
+
+config X86_SPEEDSTEP_ICH
+        tristate "Intel Speedstep on ICH-M chipsets (ioport interface)"
+        select CPU_FREQ_TABLE
+        help
+          This adds the CPUFreq driver for certain mobile Intel Pentium III
+          (Coppermine), all mobile Intel Pentium III-M (Tualatin) and all
+          mobile Intel Pentium 4 P4-M on systems which have an Intel ICH2, 
+          ICH3 or ICH4 southbridge.
+
+          For details, take a look at <file:Documentation/cpu-freq/>.
+
+          If in doubt, say N.
+
+config X86_SPEEDSTEP_SMI
+        tristate "Intel SpeedStep on 440BX/ZX/MX chipsets (SMI interface)"
+        select CPU_FREQ_TABLE
+        depends on EXPERIMENTAL
+        help
+          This adds the CPUFreq driver for certain mobile Intel Pentium III
+          (Coppermine), all mobile Intel Pentium III-M (Tualatin)  
+          on systems which have an Intel 440BX/ZX/MX southbridge.
+
+          For details, take a look at <file:Documentation/cpu-freq/>.
+
+          If in doubt, say N.
+
+config X86_P4_CLOCKMOD
+        tristate "Intel Pentium 4 clock modulation"
+        select CPU_FREQ_TABLE
+        help
+          This adds the CPUFreq driver for Intel Pentium 4 / XEON
+          processors.
+
+          For details, take a look at <file:Documentation/cpu-freq/>.
+
+          If in doubt, say N.
+
+config X86_CPUFREQ_NFORCE2
+        tristate "nVidia nForce2 FSB changing"
+        depends on EXPERIMENTAL
+        help
+          This adds the CPUFreq driver for FSB changing on nVidia nForce2
+          platforms.
+
+          For details, take a look at <file:Documentation/cpu-freq/>.
+
+          If in doubt, say N.
+
+config X86_LONGRUN
+        tristate "Transmeta LongRun"
+        help
+          This adds the CPUFreq driver for Transmeta Crusoe and Efficeon processors
+          which support LongRun.
+
+          For details, take a look at <file:Documentation/cpu-freq/>.
+
+          If in doubt, say N.
+
+config X86_LONGHAUL
+        tristate "VIA Cyrix III Longhaul"
+        select CPU_FREQ_TABLE
+        help
+          This adds the CPUFreq driver for VIA Samuel/CyrixIII, 
+          VIA Cyrix Samuel/C3, VIA Cyrix Ezra and VIA Cyrix Ezra-T 
+          processors.
+
+          For details, take a look at <file:Documentation/cpu-freq/>.
+
+          If in doubt, say N.
+
+comment "shared options"
+
+config X86_ACPI_CPUFREQ_PROC_INTF
+        bool "/proc/acpi/processor/../performance interface (deprecated)"
+        depends on PROC_FS
+        depends on X86_ACPI_CPUFREQ || X86_SPEEDSTEP_CENTRINO_ACPI || X86_POWERNOW_K7_ACPI || X86_POWERNOW_K8_ACPI
+        help
+          This enables the deprecated /proc/acpi/processor/../performance 
+          interface. While it is helpful for debugging, the generic,
+          cross-architecture cpufreq interfaces should be used.
+
+          If in doubt, say N.
+
+config X86_SPEEDSTEP_LIB
+        tristate
+        default X86_SPEEDSTEP_ICH || X86_SPEEDSTEP_SMI || X86_P4_CLOCKMOD
+
+config X86_SPEEDSTEP_RELAXED_CAP_CHECK
+        bool "Relaxed speedstep capability checks"
+        depends on (X86_SPEEDSTEP_SMI || X86_SPEEDSTEP_ICH)
+        help
+          Don't perform all checks for a speedstep capable system which would 
+          normally be done. Some ancient or strange systems, though speedstep 
+          capable, don't always indicate that they are speedstep capable. This 
+          option lets the probing code bypass some of those checks if the
+          parameter "relaxed_check=1" is passed to the module.
+
+endif   # CPU_FREQ
+
+endmenu