1 files changed, 34 insertions, 19 deletions

diff --git a/arch/blackfin/mach-bf537/boards/pnav10.c b/arch/blackfin/mach-bf537/boards/pnav10.c
index 8806f1230f2d..20507e92a3a4 100644
--- a/arch/blackfin/mach-bf537/boards/pnav10.c
+++ b/arch/blackfin/mach-bf537/boards/pnav10.c
@@ -38,6 +38,7 @@
 #include <linux/usb_isp1362.h>
 #endif
 #include <linux/irq.h>
+#include <asm/dma.h>
 #include <asm/bfin5xx_spi.h>
 #include <linux/usb_sl811.h>
 
@@ -130,15 +131,13 @@ static struct resource sl811_hcd_resources[] = {
 #if defined(CONFIG_USB_SL811_BFIN_USE_VBUS)
 void sl811_port_power(struct device *dev, int is_on)
 {
-        unsigned short mask = (1 << CONFIG_USB_SL811_BFIN_GPIO_VBUS);
-
-        bfin_write_PORT_FER(bfin_read_PORT_FER() & ~mask);
-        bfin_write_FIO_DIR(bfin_read_FIO_DIR() | mask);
+        gpio_request(CONFIG_USB_SL811_BFIN_GPIO_VBUS, "usb:SL811_VBUS");
+        gpio_direction_output(CONFIG_USB_SL811_BFIN_GPIO_VBUS);
 
         if (is_on)
-                bfin_write_FIO_FLAG_S(mask);
+                gpio_set_value(CONFIG_USB_SL811_BFIN_GPIO_VBUS, 1);
         else
-                bfin_write_FIO_FLAG_C(mask);
+                gpio_set_value(CONFIG_USB_SL811_BFIN_GPIO_VBUS, 0);
 }
 #endif
 
@@ -323,7 +322,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
                 /* the modalias must be the same as spi device driver name */
                 .modalias = "m25p80", /* Name of spi_driver for this device */
                 .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
-                .bus_num = 1, /* Framework bus number */
+                .bus_num = 0, /* Framework bus number */
                 .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
                 .platform_data = &bfin_spi_flash_data,
                 .controller_data = &spi_flash_chip_info,
@@ -336,7 +335,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
         {
                 .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
                 .max_speed_hz = 6250000,     /* max spi clock (SCK) speed in HZ */
-                .bus_num = 1, /* Framework bus number */
+                .bus_num = 0, /* Framework bus number */
                 .chip_select = 1, /* Framework chip select. */
                 .platform_data = NULL, /* No spi_driver specific config */
                 .controller_data = &spi_adc_chip_info,
@@ -348,7 +347,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
         {
                 .modalias = "ad1836-spi",
                 .max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
-                .bus_num = 1,
+                .bus_num = 0,
                 .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
                 .controller_data = &ad1836_spi_chip_info,
         },
@@ -357,7 +356,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
         {
                 .modalias = "ad9960-spi",
                 .max_speed_hz = 10000000,     /* max spi clock (SCK) speed in HZ */
-                .bus_num = 1,
+                .bus_num = 0,
                 .chip_select = 1,
                 .controller_data = &ad9960_spi_chip_info,
         },
@@ -366,7 +365,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
         {
                 .modalias = "spi_mmc_dummy",
                 .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
-                .bus_num = 1,
+                .bus_num = 0,
                 .chip_select = 7,
                 .platform_data = NULL,
                 .controller_data = &spi_mmc_chip_info,
@@ -375,7 +374,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
         {
                 .modalias = "spi_mmc",
                 .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
-                .bus_num = 1,
+                .bus_num = 0,
                 .chip_select = CONFIG_SPI_MMC_CS_CHAN,
                 .platform_data = NULL,
                 .controller_data = &spi_mmc_chip_info,
@@ -396,24 +395,40 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 
 };
 
+/* SPI (0) */
+static struct resource bfin_spi0_resource[] = {
+        [0] = {
+                .start = SPI0_REGBASE,
+                .end   = SPI0_REGBASE + 0xFF,
+                .flags = IORESOURCE_MEM,
+                },
+        [1] = {
+                .start = CH_SPI,
+                .end   = CH_SPI,
+                .flags = IORESOURCE_IRQ,
+        }
+};
+
 /* SPI controller data */
-static struct bfin5xx_spi_master spi_bfin_master_info = {
+static struct bfin5xx_spi_master bfin_spi0_info = {
         .num_chipselect = 8,
         .enable_dma = 1,  /* master has the ability to do dma transfer */
 };
 
-static struct platform_device spi_bfin_master_device = {
-        .name = "bfin-spi-master",
-        .id = 1, /* Bus number */
+static struct platform_device bfin_spi0_device = {
+        .name = "bfin-spi",
+        .id = 0, /* Bus number */
+        .num_resources = ARRAY_SIZE(bfin_spi0_resource),
+        .resource = bfin_spi0_resource,
         .dev = {
-                .platform_data = &spi_bfin_master_info, /* Passed to driver */
+                .platform_data = &bfin_spi0_info, /* Passed to driver */
         },
 };
 #endif  /* spi master and devices */
 
 #if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
 static struct platform_device bfin_fb_device = {
-        .name = "bf537-fb",
+        .name = "bf537-lq035",
 };
 #endif
 
@@ -469,7 +484,7 @@ static struct platform_device *stamp_devices[] __initdata = {
 #endif
 
 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
-        &spi_bfin_master_device,
+        &bfin_spi0_device,
 #endif
 
 #if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)