1 files changed, 418 insertions, 0 deletions

diff --git a/arch/blackfin/mach-bf537/boards/dnp5370.c b/arch/blackfin/mach-bf537/boards/dnp5370.c
new file mode 100644
index 000000000000..e1e9ea02ad89
--- /dev/null
+++ b/arch/blackfin/mach-bf537/boards/dnp5370.c
@@ -0,0 +1,418 @@
+/*
+ * This is the configuration for SSV Dil/NetPC DNP/5370 board.
+ *
+ * DIL module:         http://www.dilnetpc.com/dnp0086.htm
+ * SK28 (starter kit): http://www.dilnetpc.com/dnp0088.htm
+ *
+ * Copyright 2010 3ality Digital Systems
+ * Copyright 2005 National ICT Australia (NICTA)
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/plat-ram.h>
+#include <linux/mtd/physmap.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/spi/mmc_spi.h>
+#include <linux/phy.h>
+#include <asm/dma.h>
+#include <asm/bfin5xx_spi.h>
+#include <asm/reboot.h>
+#include <asm/portmux.h>
+#include <asm/dpmc.h>
+
+/*
+ * Name the Board for the /proc/cpuinfo
+ */
+const char bfin_board_name[] = "DNP/5370";
+#define FLASH_MAC               0x202f0000
+#define CONFIG_MTD_PHYSMAP_LEN  0x300000
+
+#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+static struct platform_device rtc_device = {
+        .name = "rtc-bfin",
+        .id   = -1,
+};
+#endif
+
+#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+#include <linux/bfin_mac.h>
+static const unsigned short bfin_mac_peripherals[] = P_RMII0;
+
+static struct bfin_phydev_platform_data bfin_phydev_data[] = {
+        {
+                .addr = 1,
+                .irq = PHY_POLL, /* IRQ_MAC_PHYINT */
+        },
+};
+
+static struct bfin_mii_bus_platform_data bfin_mii_bus_data = {
+        .phydev_number   = 1,
+        .phydev_data     = bfin_phydev_data,
+        .phy_mode        = PHY_INTERFACE_MODE_RMII,
+        .mac_peripherals = bfin_mac_peripherals,
+};
+
+static struct platform_device bfin_mii_bus = {
+        .name = "bfin_mii_bus",
+        .dev = {
+                .platform_data = &bfin_mii_bus_data,
+        }
+};
+
+static struct platform_device bfin_mac_device = {
+        .name = "bfin_mac",
+        .dev = {
+                .platform_data = &bfin_mii_bus,
+        }
+};
+#endif
+
+#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+static struct mtd_partition asmb_flash_partitions[] = {
+        {
+                .name       = "bootloader(nor)",
+                .size       = 0x30000,
+                .offset     = 0,
+        }, {
+                .name       = "linux kernel and rootfs(nor)",
+                .size       = 0x300000 - 0x30000 - 0x10000,
+                .offset     = MTDPART_OFS_APPEND,
+        }, {
+                .name       = "MAC address(nor)",
+                .size       = 0x10000,
+                .offset     = MTDPART_OFS_APPEND,
+                .mask_flags = MTD_WRITEABLE,
+        }
+};
+
+static struct physmap_flash_data asmb_flash_data = {
+        .width      = 1,
+        .parts      = asmb_flash_partitions,
+        .nr_parts   = ARRAY_SIZE(asmb_flash_partitions),
+};
+
+static struct resource asmb_flash_resource = {
+        .start = 0x20000000,
+        .end   = 0x202fffff,
+        .flags = IORESOURCE_MEM,
+};
+
+/* 4 MB NOR flash attached to async memory banks 0-2,
+ * therefore only 3 MB visible.
+ */
+static struct platform_device asmb_flash_device = {
+        .name     = "physmap-flash",
+        .id       = 0,
+        .dev = {
+                .platform_data = &asmb_flash_data,
+        },
+        .num_resources = 1,
+        .resource      = &asmb_flash_resource,
+};
+#endif
+
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+
+#define MMC_SPI_CARD_DETECT_INT IRQ_PF5
+
+static int bfin_mmc_spi_init(struct device *dev,
+        irqreturn_t (*detect_int)(int, void *), void *data)
+{
+        return request_irq(MMC_SPI_CARD_DETECT_INT, detect_int,
+                IRQF_TRIGGER_FALLING, "mmc-spi-detect", data);
+}
+
+static void bfin_mmc_spi_exit(struct device *dev, void *data)
+{
+        free_irq(MMC_SPI_CARD_DETECT_INT, data);
+}
+
+static struct bfin5xx_spi_chip mmc_spi_chip_info = {
+        .enable_dma    = 0,      /* use no dma transfer with this chip*/
+        .bits_per_word = 8,
+};
+
+static struct mmc_spi_platform_data bfin_mmc_spi_pdata = {
+        .init = bfin_mmc_spi_init,
+        .exit = bfin_mmc_spi_exit,
+        .detect_delay = 100, /* msecs */
+};
+#endif
+
+#if defined(CONFIG_MTD_DATAFLASH) || defined(CONFIG_MTD_DATAFLASH_MODULE)
+/* This mapping is for at45db642 it has 1056 page size,
+ * partition size and offset should be page aligned
+ */
+static struct mtd_partition bfin_spi_dataflash_partitions[] = {
+        {
+                .name   = "JFFS2 dataflash(nor)",
+#ifdef CONFIG_MTD_PAGESIZE_1024
+                .offset = 0x40000,
+                .size   = 0x7C0000,
+#else
+                .offset = 0x0,
+                .size   = 0x840000,
+#endif
+        }
+};
+
+static struct flash_platform_data bfin_spi_dataflash_data = {
+        .name     = "mtd_dataflash",
+        .parts    = bfin_spi_dataflash_partitions,
+        .nr_parts = ARRAY_SIZE(bfin_spi_dataflash_partitions),
+        .type     = "mtd_dataflash",
+};
+
+static struct bfin5xx_spi_chip spi_dataflash_chip_info = {
+        .enable_dma    = 0,      /* use no dma transfer with this chip*/
+        .bits_per_word = 8,
+};
+#endif
+
+static struct spi_board_info bfin_spi_board_info[] __initdata = {
+/* SD/MMC card reader at SPI bus */
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+        {
+                .modalias        = "mmc_spi",
+                .max_speed_hz    = 20000000,
+                .bus_num         = 0,
+                .chip_select     = 1,
+                .platform_data   = &bfin_mmc_spi_pdata,
+                .controller_data = &mmc_spi_chip_info,
+                .mode            = SPI_MODE_3,
+        },
+#endif
+
+/* 8 Megabyte Atmel NOR flash chip at SPI bus */
+#if defined(CONFIG_MTD_DATAFLASH) || defined(CONFIG_MTD_DATAFLASH_MODULE)
+        {
+        .modalias        = "mtd_dataflash",
+        .max_speed_hz    = 16700000,
+        .bus_num         = 0,
+        .chip_select     = 2,
+        .platform_data   = &bfin_spi_dataflash_data,
+        .controller_data = &spi_dataflash_chip_info,
+        .mode            = SPI_MODE_3, /* SPI_CPHA and SPI_CPOL */
+        },
+#endif
+};
+
+/* SPI controller data */
+/* SPI (0) */
+static struct resource bfin_spi0_resource[] = {
+        [0] = {
+                .start = SPI0_REGBASE,
+                .end   = SPI0_REGBASE + 0xFF,
+                .flags = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start = CH_SPI,
+                .end   = CH_SPI,
+                .flags = IORESOURCE_DMA,
+        },
+        [2] = {
+                .start = IRQ_SPI,
+                .end   = IRQ_SPI,
+                .flags = IORESOURCE_IRQ,
+        },
+};
+
+static struct bfin5xx_spi_master spi_bfin_master_info = {
+        .num_chipselect = 8,
+        .enable_dma     = 1,  /* master has the ability to do dma transfer */
+        .pin_req        = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
+};
+
+static struct platform_device spi_bfin_master_device = {
+        .name          = "bfin-spi",
+        .id            = 0, /* Bus number */
+        .num_resources = ARRAY_SIZE(bfin_spi0_resource),
+        .resource      = bfin_spi0_resource,
+        .dev           = {
+                .platform_data = &spi_bfin_master_info, /* Passed to driver */
+        },
+};
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+static struct resource bfin_uart0_resources[] = {
+        {
+                .start = UART0_THR,
+                .end = UART0_GCTL+2,
+                .flags = IORESOURCE_MEM,
+        },
+        {
+                .start = IRQ_UART0_RX,
+                .end = IRQ_UART0_RX+1,
+                .flags = IORESOURCE_IRQ,
+        },
+        {
+                .start = IRQ_UART0_ERROR,
+                .end = IRQ_UART0_ERROR,
+                .flags = IORESOURCE_IRQ,
+        },
+        {
+                .start = CH_UART0_TX,
+                .end = CH_UART0_TX,
+                .flags = IORESOURCE_DMA,
+        },
+        {
+                .start = CH_UART0_RX,
+                .end = CH_UART0_RX,
+                .flags = IORESOURCE_DMA,
+        },
+};
+
+static unsigned short bfin_uart0_peripherals[] = {
+        P_UART0_TX, P_UART0_RX, 0
+};
+
+static struct platform_device bfin_uart0_device = {
+        .name = "bfin-uart",
+        .id = 0,
+        .num_resources = ARRAY_SIZE(bfin_uart0_resources),
+        .resource = bfin_uart0_resources,
+        .dev = {
+                .platform_data = &bfin_uart0_peripherals, /* Passed to driver */
+        },
+};
+#endif
+
+#ifdef CONFIG_SERIAL_BFIN_UART1
+static struct resource bfin_uart1_resources[] = {
+        {
+                .start = UART1_THR,
+                .end   = UART1_GCTL+2,
+                .flags = IORESOURCE_MEM,
+        },
+        {
+                .start = IRQ_UART1_RX,
+                .end   = IRQ_UART1_RX+1,
+                .flags = IORESOURCE_IRQ,
+        },
+        {
+                .start = IRQ_UART1_ERROR,
+                .end   = IRQ_UART1_ERROR,
+                .flags = IORESOURCE_IRQ,
+        },
+        {
+                .start = CH_UART1_TX,
+                .end   = CH_UART1_TX,
+                .flags = IORESOURCE_DMA,
+        },
+        {
+                .start = CH_UART1_RX,
+                .end   = CH_UART1_RX,
+                .flags = IORESOURCE_DMA,
+        },
+};
+
+static unsigned short bfin_uart1_peripherals[] = {
+        P_UART1_TX, P_UART1_RX, 0
+};
+
+static struct platform_device bfin_uart1_device = {
+        .name          = "bfin-uart",
+        .id            = 1,
+        .num_resources = ARRAY_SIZE(bfin_uart1_resources),
+        .resource      = bfin_uart1_resources,
+        .dev = {
+                .platform_data = &bfin_uart1_peripherals, /* Passed to driver */
+        },
+};
+#endif
+#endif
+
+#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+static struct resource bfin_twi0_resource[] = {
+        [0] = {
+                .start = TWI0_REGBASE,
+                .end   = TWI0_REGBASE + 0xff,
+                .flags = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start = IRQ_TWI,
+                .end   = IRQ_TWI,
+                .flags = IORESOURCE_IRQ,
+        },
+};
+
+static struct platform_device i2c_bfin_twi_device = {
+        .name          = "i2c-bfin-twi",
+        .id            = 0,
+        .num_resources = ARRAY_SIZE(bfin_twi0_resource),
+        .resource      = bfin_twi0_resource,
+};
+#endif
+
+static struct platform_device *dnp5370_devices[] __initdata = {
+
+#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+        &bfin_uart0_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+        &bfin_uart1_device,
+#endif
+#endif
+
+#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+        &asmb_flash_device,
+#endif
+
+#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+        &bfin_mii_bus,
+        &bfin_mac_device,
+#endif
+
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+        &spi_bfin_master_device,
+#endif
+
+#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+        &i2c_bfin_twi_device,
+#endif
+
+#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+        &rtc_device,
+#endif
+
+};
+
+static int __init dnp5370_init(void)
+{
+        printk(KERN_INFO "DNP/5370: registering device resources\n");
+        platform_add_devices(dnp5370_devices, ARRAY_SIZE(dnp5370_devices));
+        printk(KERN_INFO "DNP/5370: registering %zu SPI slave devices\n",
+               ARRAY_SIZE(bfin_spi_board_info));
+        spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
+        printk(KERN_INFO "DNP/5370: MAC %pM\n", (void *)FLASH_MAC);
+        return 0;
+}
+arch_initcall(dnp5370_init);
+
+/*
+ * Currently the MAC address is saved in Flash by U-Boot
+ */
+void bfin_get_ether_addr(char *addr)
+{
+        *(u32 *)(&(addr[0])) = bfin_read32(FLASH_MAC);
+        *(u16 *)(&(addr[4])) = bfin_read16(FLASH_MAC + 4);
+}
+EXPORT_SYMBOL(bfin_get_ether_addr);