1 files changed, 727 insertions, 0 deletions

diff --git a/arch/blackfin/mach-bf537/boards/cm_bf537e.c b/arch/blackfin/mach-bf537/boards/cm_bf537e.c
new file mode 100644
index 000000000000..87acb7dd2df3
--- /dev/null
+++ b/arch/blackfin/mach-bf537/boards/cm_bf537e.c
@@ -0,0 +1,727 @@
+/*
+ * File:         arch/blackfin/mach-bf537/boards/cm_bf537.c
+ * Based on:     arch/blackfin/mach-bf533/boards/ezkit.c
+ * Author:       Aidan Williams <aidan@nicta.com.au>
+ *
+ * Created:      2005
+ * Description:  Board description file
+ *
+ * Modified:
+ *               Copyright 2005 National ICT Australia (NICTA)
+ *               Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs:         Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/device.h>
+#include <linux/etherdevice.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+#include <linux/usb/isp1362.h>
+#endif
+#include <linux/ata_platform.h>
+#include <linux/irq.h>
+#include <asm/dma.h>
+#include <asm/bfin5xx_spi.h>
+#include <asm/portmux.h>
+#include <asm/dpmc.h>
+
+/*
+ * Name the Board for the /proc/cpuinfo
+ */
+const char bfin_board_name[] = "Bluetechnix CM BF537E";
+
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+/* all SPI peripherals info goes here */
+
+#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
+static struct mtd_partition bfin_spi_flash_partitions[] = {
+        {
+                .name = "bootloader(spi)",
+                .size = 0x00020000,
+                .offset = 0,
+                .mask_flags = MTD_CAP_ROM
+        }, {
+                .name = "linux kernel(spi)",
+                .size = 0xe0000,
+                .offset = 0x20000
+        }, {
+                .name = "file system(spi)",
+                .size = 0x700000,
+                .offset = 0x00100000,
+        }
+};
+
+static struct flash_platform_data bfin_spi_flash_data = {
+        .name = "m25p80",
+        .parts = bfin_spi_flash_partitions,
+        .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
+        .type = "m25p64",
+};
+
+/* SPI flash chip (m25p64) */
+static struct bfin5xx_spi_chip spi_flash_chip_info = {
+        .enable_dma = 0,         /* use dma transfer with this chip*/
+        .bits_per_word = 8,
+};
+#endif
+
+#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE)
+/* SPI ADC chip */
+static struct bfin5xx_spi_chip spi_adc_chip_info = {
+        .enable_dma = 1,         /* use dma transfer with this chip*/
+        .bits_per_word = 16,
+};
+#endif
+
+#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
+        .enable_dma = 0,
+        .bits_per_word = 16,
+};
+#endif
+
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+static struct bfin5xx_spi_chip  mmc_spi_chip_info = {
+        .enable_dma = 0,
+        .bits_per_word = 8,
+};
+#endif
+
+static struct spi_board_info bfin_spi_board_info[] __initdata = {
+#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
+        {
+                /* the modalias must be the same as spi device driver name */
+                .modalias = "m25p80", /* Name of spi_driver for this device */
+                .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
+                .bus_num = 0, /* Framework bus number */
+                .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
+                .platform_data = &bfin_spi_flash_data,
+                .controller_data = &spi_flash_chip_info,
+                .mode = SPI_MODE_3,
+        },
+#endif
+
+#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE)
+        {
+                .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
+                .max_speed_hz = 6250000,     /* max spi clock (SCK) speed in HZ */
+                .bus_num = 0, /* Framework bus number */
+                .chip_select = 1, /* Framework chip select. */
+                .platform_data = NULL, /* No spi_driver specific config */
+                .controller_data = &spi_adc_chip_info,
+        },
+#endif
+
+#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+        {
+                .modalias = "ad1836",
+                .max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
+                .bus_num = 0,
+                .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
+                .controller_data = &ad1836_spi_chip_info,
+        },
+#endif
+
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+        {
+                .modalias = "mmc_spi",
+                .max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
+                .bus_num = 0,
+                .chip_select = 1,
+                .controller_data = &mmc_spi_chip_info,
+                .mode = SPI_MODE_3,
+        },
+#endif
+};
+
+/* SPI (0) */
+static struct resource bfin_spi0_resource[] = {
+        [0] = {
+                .start = SPI0_REGBASE,
+                .end   = SPI0_REGBASE + 0xFF,
+                .flags = IORESOURCE_MEM,
+                },
+        [1] = {
+                .start = CH_SPI,
+                .end   = CH_SPI,
+                .flags = IORESOURCE_DMA,
+        },
+        [2] = {
+                .start = IRQ_SPI,
+                .end   = IRQ_SPI,
+                .flags = IORESOURCE_IRQ,
+        },
+};
+
+/* SPI controller data */
+static struct bfin5xx_spi_master bfin_spi0_info = {
+        .num_chipselect = 8,
+        .enable_dma = 1,  /* master has the ability to do dma transfer */
+        .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
+};
+
+static struct platform_device bfin_spi0_device = {
+        .name = "bfin-spi",
+        .id = 0, /* Bus number */
+        .num_resources = ARRAY_SIZE(bfin_spi0_resource),
+        .resource = bfin_spi0_resource,
+        .dev = {
+                .platform_data = &bfin_spi0_info, /* Passed to driver */
+        },
+};
+#endif  /* spi master and devices */
+
+#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+static struct platform_device rtc_device = {
+        .name = "rtc-bfin",
+        .id   = -1,
+};
+#endif
+
+#if defined(CONFIG_FB_HITACHI_TX09) || defined(CONFIG_FB_HITACHI_TX09_MODULE)
+static struct platform_device hitachi_fb_device = {
+        .name = "hitachi-tx09",
+};
+#endif
+
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+#include <linux/smc91x.h>
+
+static struct smc91x_platdata smc91x_info = {
+        .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
+        .leda = RPC_LED_100_10,
+        .ledb = RPC_LED_TX_RX,
+};
+
+static struct resource smc91x_resources[] = {
+        {
+                .start = 0x20200300,
+                .end = 0x20200300 + 16,
+                .flags = IORESOURCE_MEM,
+        }, {
+                .start = IRQ_PF14,
+                .end = IRQ_PF14,
+                .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+                },
+};
+
+static struct platform_device smc91x_device = {
+        .name = "smc91x",
+        .id = 0,
+        .num_resources = ARRAY_SIZE(smc91x_resources),
+        .resource = smc91x_resources,
+        .dev    = {
+                .platform_data  = &smc91x_info,
+        },
+};
+#endif
+
+#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+static struct resource isp1362_hcd_resources[] = {
+        {
+                .start = 0x20308000,
+                .end = 0x20308000,
+                .flags = IORESOURCE_MEM,
+        }, {
+                .start = 0x20308004,
+                .end = 0x20308004,
+                .flags = IORESOURCE_MEM,
+        }, {
+                .start = IRQ_PG15,
+                .end = IRQ_PG15,
+                .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+        },
+};
+
+static struct isp1362_platform_data isp1362_priv = {
+        .sel15Kres = 1,
+        .clknotstop = 0,
+        .oc_enable = 0,
+        .int_act_high = 0,
+        .int_edge_triggered = 0,
+        .remote_wakeup_connected = 0,
+        .no_power_switching = 1,
+        .power_switching_mode = 0,
+};
+
+static struct platform_device isp1362_hcd_device = {
+        .name = "isp1362-hcd",
+        .id = 0,
+        .dev = {
+                .platform_data = &isp1362_priv,
+        },
+        .num_resources = ARRAY_SIZE(isp1362_hcd_resources),
+        .resource = isp1362_hcd_resources,
+};
+#endif
+
+#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+static struct resource net2272_bfin_resources[] = {
+        {
+                .start = 0x20300000,
+                .end = 0x20300000 + 0x100,
+                .flags = IORESOURCE_MEM,
+        }, {
+                .start = IRQ_PG13,
+                .end = IRQ_PG13,
+                .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+        },
+};
+
+static struct platform_device net2272_bfin_device = {
+        .name = "net2272",
+        .id = -1,
+        .num_resources = ARRAY_SIZE(net2272_bfin_resources),
+        .resource = net2272_bfin_resources,
+};
+#endif
+
+static struct resource bfin_gpios_resources = {
+        .start = 0,
+        .end   = MAX_BLACKFIN_GPIOS - 1,
+        .flags = IORESOURCE_IRQ,
+};
+
+static struct platform_device bfin_gpios_device = {
+        .name = "simple-gpio",
+        .id = -1,
+        .num_resources = 1,
+        .resource = &bfin_gpios_resources,
+};
+
+#if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE)
+static struct mtd_partition cm_partitions[] = {
+        {
+                .name   = "bootloader(nor)",
+                .size   = 0x40000,
+                .offset = 0,
+        }, {
+                .name   = "linux kernel(nor)",
+                .size   = 0x100000,
+                .offset = MTDPART_OFS_APPEND,
+        }, {
+                .name   = "file system(nor)",
+                .size   = MTDPART_SIZ_FULL,
+                .offset = MTDPART_OFS_APPEND,
+        }
+};
+
+static struct physmap_flash_data cm_flash_data = {
+        .width    = 2,
+        .parts    = cm_partitions,
+        .nr_parts = ARRAY_SIZE(cm_partitions),
+};
+
+static unsigned cm_flash_gpios[] = { GPIO_PF4 };
+
+static struct resource cm_flash_resource[] = {
+        {
+                .name  = "cfi_probe",
+                .start = 0x20000000,
+                .end   = 0x201fffff,
+                .flags = IORESOURCE_MEM,
+        }, {
+                .start = (unsigned long)cm_flash_gpios,
+                .end   = ARRAY_SIZE(cm_flash_gpios),
+                .flags = IORESOURCE_IRQ,
+        }
+};
+
+static struct platform_device cm_flash_device = {
+        .name          = "gpio-addr-flash",
+        .id            = 0,
+        .dev = {
+                .platform_data = &cm_flash_data,
+        },
+        .num_resources = ARRAY_SIZE(cm_flash_resource),
+        .resource      = cm_flash_resource,
+};
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+static struct resource bfin_uart0_resources[] = {
+        {
+                .start = 0xFFC00400,
+                .end = 0xFFC004FF,
+                .flags = IORESOURCE_MEM,
+        },
+        {
+                .start = IRQ_UART0_RX,
+                .end = IRQ_UART0_RX+1,
+                .flags = IORESOURCE_IRQ,
+        },
+        {
+                .start = IRQ_UART0_ERROR,
+                .end = IRQ_UART0_ERROR,
+                .flags = IORESOURCE_IRQ,
+        },
+        {
+                .start = CH_UART0_TX,
+                .end = CH_UART0_TX,
+                .flags = IORESOURCE_DMA,
+        },
+        {
+                .start = CH_UART0_RX,
+                .end = CH_UART0_RX,
+                .flags = IORESOURCE_DMA,
+        },
+#ifdef CONFIG_BFIN_UART0_CTSRTS
+        {
+                /*
+                 * Refer to arch/blackfin/mach-xxx/include/mach/gpio.h for the GPIO map.
+                 */
+                .start = -1,
+                .end = -1,
+                .flags = IORESOURCE_IO,
+        },
+        {
+                /*
+                 * Refer to arch/blackfin/mach-xxx/include/mach/gpio.h for the GPIO map.
+                 */
+                .start = -1,
+                .end = -1,
+                .flags = IORESOURCE_IO,
+        },
+#endif
+};
+
+static struct platform_device bfin_uart0_device = {
+        .name = "bfin-uart",
+        .id = 0,
+        .num_resources = ARRAY_SIZE(bfin_uart0_resources),
+        .resource = bfin_uart0_resources,
+};
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+static struct resource bfin_uart1_resources[] = {
+        {
+                .start = 0xFFC02000,
+                .end = 0xFFC020FF,
+                .flags = IORESOURCE_MEM,
+        },
+        {
+                .start = IRQ_UART1_RX,
+                .end = IRQ_UART1_RX+1,
+                .flags = IORESOURCE_IRQ,
+        },
+        {
+                .start = IRQ_UART1_ERROR,
+                .end = IRQ_UART1_ERROR,
+                .flags = IORESOURCE_IRQ,
+        },
+        {
+                .start = CH_UART1_TX,
+                .end = CH_UART1_TX,
+                .flags = IORESOURCE_DMA,
+        },
+        {
+                .start = CH_UART1_RX,
+                .end = CH_UART1_RX,
+                .flags = IORESOURCE_DMA,
+        },
+#ifdef CONFIG_BFIN_UART1_CTSRTS
+        {
+                /*
+                 * Refer to arch/blackfin/mach-xxx/include/mach/gpio.h for the GPIO map.
+                 */
+                .start = -1,
+                .end = -1,
+                .flags = IORESOURCE_IO,
+        },
+        {
+                /*
+                 * Refer to arch/blackfin/mach-xxx/include/mach/gpio.h for the GPIO map.
+                 */
+                .start = -1,
+                .end = -1,
+                .flags = IORESOURCE_IO,
+        },
+#endif
+};
+
+static struct platform_device bfin_uart1_device = {
+        .name = "bfin-uart",
+        .id = 1,
+        .num_resources = ARRAY_SIZE(bfin_uart1_resources),
+        .resource = bfin_uart1_resources,
+};
+#endif
+#endif
+
+#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#ifdef CONFIG_BFIN_SIR0
+static struct resource bfin_sir0_resources[] = {
+        {
+                .start = 0xFFC00400,
+                .end = 0xFFC004FF,
+                .flags = IORESOURCE_MEM,
+        },
+        {
+                .start = IRQ_UART0_RX,
+                .end = IRQ_UART0_RX+1,
+                .flags = IORESOURCE_IRQ,
+        },
+        {
+                .start = CH_UART0_RX,
+                .end = CH_UART0_RX+1,
+                .flags = IORESOURCE_DMA,
+        },
+};
+static struct platform_device bfin_sir0_device = {
+        .name = "bfin_sir",
+        .id = 0,
+        .num_resources = ARRAY_SIZE(bfin_sir0_resources),
+        .resource = bfin_sir0_resources,
+};
+#endif
+#ifdef CONFIG_BFIN_SIR1
+static struct resource bfin_sir1_resources[] = {
+        {
+                .start = 0xFFC02000,
+                .end = 0xFFC020FF,
+                .flags = IORESOURCE_MEM,
+        },
+        {
+                .start = IRQ_UART1_RX,
+                .end = IRQ_UART1_RX+1,
+                .flags = IORESOURCE_IRQ,
+        },
+        {
+                .start = CH_UART1_RX,
+                .end = CH_UART1_RX+1,
+                .flags = IORESOURCE_DMA,
+        },
+};
+static struct platform_device bfin_sir1_device = {
+        .name = "bfin_sir",
+        .id = 1,
+        .num_resources = ARRAY_SIZE(bfin_sir1_resources),
+        .resource = bfin_sir1_resources,
+};
+#endif
+#endif
+
+#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+static struct resource bfin_twi0_resource[] = {
+        [0] = {
+                .start = TWI0_REGBASE,
+                .end   = TWI0_REGBASE,
+                .flags = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start = IRQ_TWI,
+                .end   = IRQ_TWI,
+                .flags = IORESOURCE_IRQ,
+        },
+};
+
+static struct platform_device i2c_bfin_twi_device = {
+        .name = "i2c-bfin-twi",
+        .id = 0,
+        .num_resources = ARRAY_SIZE(bfin_twi0_resource),
+        .resource = bfin_twi0_resource,
+};
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+static struct platform_device bfin_sport0_uart_device = {
+        .name = "bfin-sport-uart",
+        .id = 0,
+};
+
+static struct platform_device bfin_sport1_uart_device = {
+        .name = "bfin-sport-uart",
+        .id = 1,
+};
+#endif
+
+#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+static struct platform_device bfin_mii_bus = {
+        .name = "bfin_mii_bus",
+};
+
+static struct platform_device bfin_mac_device = {
+        .name = "bfin_mac",
+        .dev.platform_data = &bfin_mii_bus,
+};
+#endif
+
+#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+#define PATA_INT        IRQ_PF14
+
+static struct pata_platform_info bfin_pata_platform_data = {
+        .ioport_shift = 2,
+        .irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED,
+};
+
+static struct resource bfin_pata_resources[] = {
+        {
+                .start = 0x2030C000,
+                .end = 0x2030C01F,
+                .flags = IORESOURCE_MEM,
+        },
+        {
+                .start = 0x2030D018,
+                .end = 0x2030D01B,
+                .flags = IORESOURCE_MEM,
+        },
+        {
+                .start = PATA_INT,
+                .end = PATA_INT,
+                .flags = IORESOURCE_IRQ,
+        },
+};
+
+static struct platform_device bfin_pata_device = {
+        .name = "pata_platform",
+        .id = -1,
+        .num_resources = ARRAY_SIZE(bfin_pata_resources),
+        .resource = bfin_pata_resources,
+        .dev = {
+                .platform_data = &bfin_pata_platform_data,
+        }
+};
+#endif
+
+static const unsigned int cclk_vlev_datasheet[] =
+{
+        VRPAIR(VLEV_085, 250000000),
+        VRPAIR(VLEV_090, 376000000),
+        VRPAIR(VLEV_095, 426000000),
+        VRPAIR(VLEV_100, 426000000),
+        VRPAIR(VLEV_105, 476000000),
+        VRPAIR(VLEV_110, 476000000),
+        VRPAIR(VLEV_115, 476000000),
+        VRPAIR(VLEV_120, 500000000),
+        VRPAIR(VLEV_125, 533000000),
+        VRPAIR(VLEV_130, 600000000),
+};
+
+static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
+        .tuple_tab = cclk_vlev_datasheet,
+        .tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
+        .vr_settling_time = 25 /* us */,
+};
+
+static struct platform_device bfin_dpmc = {
+        .name = "bfin dpmc",
+        .dev = {
+                .platform_data = &bfin_dmpc_vreg_data,
+        },
+};
+
+static struct platform_device *cm_bf537e_devices[] __initdata = {
+
+        &bfin_dpmc,
+
+#if defined(CONFIG_FB_HITACHI_TX09) || defined(CONFIG_FB_HITACHI_TX09_MODULE)
+        &hitachi_fb_device,
+#endif
+
+#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+        &rtc_device,
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+#ifdef CONFIG_SERIAL_BFIN_UART0
+        &bfin_uart0_device,
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+        &bfin_uart1_device,
+#endif
+#endif
+
+#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+#ifdef CONFIG_BFIN_SIR0
+        &bfin_sir0_device,
+#endif
+#ifdef CONFIG_BFIN_SIR1
+        &bfin_sir1_device,
+#endif
+#endif
+
+#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+        &i2c_bfin_twi_device,
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+        &bfin_sport0_uart_device,
+        &bfin_sport1_uart_device,
+#endif
+
+#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+        &isp1362_hcd_device,
+#endif
+
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+        &smc91x_device,
+#endif
+
+#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+        &bfin_mii_bus,
+        &bfin_mac_device,
+#endif
+
+#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+        &net2272_bfin_device,
+#endif
+
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+        &bfin_spi0_device,
+#endif
+
+#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+        &bfin_pata_device,
+#endif
+
+#if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE)
+        &cm_flash_device,
+#endif
+
+        &bfin_gpios_device,
+};
+
+static int __init cm_bf537e_init(void)
+{
+        printk(KERN_INFO "%s(): registering device resources\n", __func__);
+        platform_add_devices(cm_bf537e_devices, ARRAY_SIZE(cm_bf537e_devices));
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+        spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
+#endif
+
+#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+        irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
+#endif
+        return 0;
+}
+
+arch_initcall(cm_bf537e_init);
+
+void bfin_get_ether_addr(char *addr)
+{
+        random_ether_addr(addr);
+        printk(KERN_WARNING "%s:%s: Setting Ethernet MAC to a random one\n", __FILE__, __func__);
+}
+EXPORT_SYMBOL(bfin_get_ether_addr);