8 files changed, 26 insertions, 176 deletions

diff --git a/arch/blackfin/mach-bf533/boards/Kconfig b/arch/blackfin/mach-bf533/boards/Kconfig
index 308c98dc5aba..8d8b3e7321e6 100644
--- a/arch/blackfin/mach-bf533/boards/Kconfig
+++ b/arch/blackfin/mach-bf533/boards/Kconfig
@@ -38,9 +38,4 @@ config BFIN532_IP0X
         help
           Core support for IP04/IP04 open hardware IP-PBX.
 
-config GENERIC_BF533_BOARD
-        bool "Generic"
-        help
-          Generic or Custom board support.
-
 endchoice
diff --git a/arch/blackfin/mach-bf533/boards/Makefile b/arch/blackfin/mach-bf533/boards/Makefile
index 9afbe72b484f..ff1e832f80d2 100644
--- a/arch/blackfin/mach-bf533/boards/Makefile
+++ b/arch/blackfin/mach-bf533/boards/Makefile
@@ -2,7 +2,6 @@
 # arch/blackfin/mach-bf533/boards/Makefile
 #
 
-obj-$(CONFIG_GENERIC_BF533_BOARD)      += generic_board.o
 obj-$(CONFIG_BFIN533_STAMP)            += stamp.o
 obj-$(CONFIG_BFIN532_IP0X)             += ip0x.o
 obj-$(CONFIG_BFIN533_EZKIT)            += ezkit.o
diff --git a/arch/blackfin/mach-bf533/boards/blackstamp.c b/arch/blackfin/mach-bf533/boards/blackstamp.c
index 015c18f85e7f..0765872a8ada 100644
--- a/arch/blackfin/mach-bf533/boards/blackstamp.c
+++ b/arch/blackfin/mach-bf533/boards/blackstamp.c
@@ -101,9 +101,9 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-static struct bfin5xx_spi_chip spi_mmc_chip_info = {
-        .enable_dma = 1,
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+static struct bfin5xx_spi_chip mmc_spi_chip_info = {
+        .enable_dma = 0,
         .bits_per_word = 8,
 };
 #endif
@@ -129,23 +129,13 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
         },
 #endif
 
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-        {
-                .modalias = "spi_mmc_dummy",
-                .max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
-                .bus_num = 0,
-                .chip_select = 0,
-                .platform_data = NULL,
-                .controller_data = &spi_mmc_chip_info,
-                .mode = SPI_MODE_3,
-        },
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
         {
-                .modalias = "spi_mmc",
+                .modalias = "mmc_spi",
                 .max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
                 .bus_num = 0,
-                .chip_select = CONFIG_SPI_MMC_CS_CHAN,
-                .platform_data = NULL,
-                .controller_data = &spi_mmc_chip_info,
+                .chip_select = 5,
+                .controller_data = &mmc_spi_chip_info,
                 .mode = SPI_MODE_3,
         },
 #endif
diff --git a/arch/blackfin/mach-bf533/boards/cm_bf533.c b/arch/blackfin/mach-bf533/boards/cm_bf533.c
index e7061c7e8c42..e8974878d8c2 100644
--- a/arch/blackfin/mach-bf533/boards/cm_bf533.c
+++ b/arch/blackfin/mach-bf533/boards/cm_bf533.c
@@ -96,9 +96,9 @@ static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-static struct bfin5xx_spi_chip spi_mmc_chip_info = {
-        .enable_dma = 1,
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+static struct bfin5xx_spi_chip mmc_spi_chip_info = {
+        .enable_dma = 0,
         .bits_per_word = 8,
 };
 #endif
@@ -138,23 +138,13 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
         },
 #endif
 
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-        {
-                .modalias = "spi_mmc_dummy",
-                .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
-                .bus_num = 0,
-                .chip_select = 0,
-                .platform_data = NULL,
-                .controller_data = &spi_mmc_chip_info,
-                .mode = SPI_MODE_3,
-        },
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
         {
-                .modalias = "spi_mmc",
+                .modalias = "mmc_spi",
                 .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
                 .bus_num = 0,
-                .chip_select = CONFIG_SPI_MMC_CS_CHAN,
-                .platform_data = NULL,
-                .controller_data = &spi_mmc_chip_info,
+                .chip_select = 5,
+                .controller_data = &mmc_spi_chip_info,
                 .mode = SPI_MODE_3,
         },
 #endif
diff --git a/arch/blackfin/mach-bf533/boards/generic_board.c b/arch/blackfin/mach-bf533/boards/generic_board.c
deleted file mode 100644
index 986eeec53b1f..000000000000
--- a/arch/blackfin/mach-bf533/boards/generic_board.c
+++ /dev/null
@@ -1,126 +0,0 @@
-/*
- * File:         arch/blackfin/mach-bf533/generic_board.c
- * Based on:     arch/blackfin/mach-bf533/ezkit.c
- * Author:       Aidan Williams <aidan@nicta.com.au>
- *
- * Created:      2005
- * Description:
- *
- * Modified:
- *               Copyright 2005 National ICT Australia (NICTA)
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/irq.h>
-
-/*
- * Name the Board for the /proc/cpuinfo
- */
-const char bfin_board_name[] = "UNKNOWN BOARD";
-
-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
-static struct platform_device rtc_device = {
-        .name = "rtc-bfin",
-        .id   = -1,
-};
-#endif
-
-/*
- *  Driver needs to know address, irq and flag pin.
- */
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
-static struct resource smc91x_resources[] = {
-        {
-                .start = 0x20300300,
-                .end = 0x20300300 + 16,
-                .flags = IORESOURCE_MEM,
-        }, {
-                .start = IRQ_PROG_INTB,
-                .end = IRQ_PROG_INTB,
-                .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
-        }, {
-                .start = IRQ_PF7,
-                .end = IRQ_PF7,
-                .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
-        },
-};
-
-static struct platform_device smc91x_device = {
-        .name = "smc91x",
-        .id = 0,
-        .num_resources = ARRAY_SIZE(smc91x_resources),
-        .resource = smc91x_resources,
-};
-#endif
-
-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
-#ifdef CONFIG_BFIN_SIR0
-static struct resource bfin_sir0_resources[] = {
-        {
-                .start = 0xFFC00400,
-                .end = 0xFFC004FF,
-                .flags = IORESOURCE_MEM,
-        },
-        {
-                .start = IRQ_UART0_RX,
-                .end = IRQ_UART0_RX+1,
-                .flags = IORESOURCE_IRQ,
-        },
-        {
-                .start = CH_UART0_RX,
-                .end = CH_UART0_RX+1,
-                .flags = IORESOURCE_DMA,
-        },
-};
-
-static struct platform_device bfin_sir0_device = {
-        .name = "bfin_sir",
-        .id = 0,
-        .num_resources = ARRAY_SIZE(bfin_sir0_resources),
-        .resource = bfin_sir0_resources,
-};
-#endif
-#endif
-
-static struct platform_device *generic_board_devices[] __initdata = {
-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
-        &rtc_device,
-#endif
-
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
-        &smc91x_device,
-#endif
-
-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
-#ifdef CONFIG_BFIN_SIR0
-        &bfin_sir0_device,
-#endif
-#endif
-};
-
-static int __init generic_board_init(void)
-{
-        printk(KERN_INFO "%s(): registering device resources\n", __func__);
-        return platform_add_devices(generic_board_devices, ARRAY_SIZE(generic_board_devices));
-}
-
-arch_initcall(generic_board_init);
diff --git a/arch/blackfin/mach-bf533/boards/ip0x.c b/arch/blackfin/mach-bf533/boards/ip0x.c
index e30b1b7d1442..f19b63378b12 100644
--- a/arch/blackfin/mach-bf533/boards/ip0x.c
+++ b/arch/blackfin/mach-bf533/boards/ip0x.c
@@ -127,8 +127,8 @@ static struct platform_device dm9000_device2 = {
 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
 /* all SPI peripherals info goes here */
 
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-static struct bfin5xx_spi_chip spi_mmc_chip_info = {
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+static struct bfin5xx_spi_chip mmc_spi_chip_info = {
 /*
  * CPOL (Clock Polarity)
  *  0 - Active high SCK
@@ -152,14 +152,13 @@ static struct bfin5xx_spi_chip spi_mmc_chip_info = {
 /* Notice: for blackfin, the speed_hz is the value of register
  * SPI_BAUD, not the real baudrate */
 static struct spi_board_info bfin_spi_board_info[] __initdata = {
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
         {
-                .modalias = "spi_mmc",
+                .modalias = "mmc_spi",
                 .max_speed_hz = 2,
                 .bus_num = 1,
-                .chip_select = CONFIG_SPI_MMC_CS_CHAN,
-                .platform_data = NULL,
-                .controller_data = &spi_mmc_chip_info,
+                .chip_select = 5,
+                .controller_data = &mmc_spi_chip_info,
         },
 #endif
 };
diff --git a/arch/blackfin/mach-bf533/include/mach/anomaly.h b/arch/blackfin/mach-bf533/include/mach/anomaly.h
index 0d3a03429fb9..1cf893e2e55b 100644
--- a/arch/blackfin/mach-bf533/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf533/include/mach/anomaly.h
@@ -2,7 +2,7 @@
  * File: include/asm-blackfin/mach-bf533/anomaly.h
  * Bugs: Enter bugs at http://blackfin.uclinux.org/
  *
- * Copyright (C) 2004-2008 Analog Devices Inc.
+ * Copyright (C) 2004-2009 Analog Devices Inc.
  * Licensed under the GPL-2 or later.
  */
 
@@ -160,7 +160,7 @@
 #define ANOMALY_05000301 (__SILICON_REVISION__ < 6)
 /* SSYNCs After Writes To DMA MMR Registers May Not Be Handled Correctly */
 #define ANOMALY_05000302 (__SILICON_REVISION__ < 5)
-/* New Feature: Additional Hysteresis on SPORT Input Pins (Not Available On Older Silicon) */
+/* SPORT_HYS Bit in PLL_CTL Register Is Not Functional */
 #define ANOMALY_05000305 (__SILICON_REVISION__ < 5)
 /* New Feature: Additional PPI Frame Sync Sampling Options (Not Available On Older Silicon) */
 #define ANOMALY_05000306 (__SILICON_REVISION__ < 5)
@@ -278,9 +278,12 @@
 #define ANOMALY_05000266 (0)
 #define ANOMALY_05000323 (0)
 #define ANOMALY_05000353 (1)
+#define ANOMALY_05000380 (0)
 #define ANOMALY_05000386 (1)
 #define ANOMALY_05000412 (0)
 #define ANOMALY_05000432 (0)
 #define ANOMALY_05000435 (0)
+#define ANOMALY_05000447 (0)
+#define ANOMALY_05000448 (0)
 
 #endif
diff --git a/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h
index f3d9e495230c..5f517f53b0fd 100644
--- a/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h
@@ -134,7 +134,7 @@ struct bfin_serial_res bfin_serial_resource[] = {
         CH_UART_TX,
         CH_UART_RX,
 #endif
-#ifdef CONFIG_BFIN_UART0_CTSRTS
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
         CONFIG_UART0_CTS_PIN,
         CONFIG_UART0_RTS_PIN,
 #endif