aboutsummaryrefslogtreecommitdiffstats
path: root/arch/blackfin/mach-bf527/include/mach/defBF527.h
diff options
context:
space:
mode:
Diffstat (limited to 'arch/blackfin/mach-bf527/include/mach/defBF527.h')
-rw-r--r--arch/blackfin/mach-bf527/include/mach/defBF527.h1090
1 files changed, 1090 insertions, 0 deletions
diff --git a/arch/blackfin/mach-bf527/include/mach/defBF527.h b/arch/blackfin/mach-bf527/include/mach/defBF527.h
new file mode 100644
index 000000000000..f040f364afa3
--- /dev/null
+++ b/arch/blackfin/mach-bf527/include/mach/defBF527.h
@@ -0,0 +1,1090 @@
1/*
2 * File: include/asm-blackfin/mach-bf527/defBF527.h
3 * Based on:
4 * Author:
5 *
6 * Created:
7 * Description:
8 *
9 * Rev:
10 *
11 * Modified:
12 *
13 * Bugs: Enter bugs at http://blackfin.uclinux.org/
14 *
15 * This program is free software; you can redistribute it and/or modify
16 * it under the terms of the GNU General Public License as published by
17 * the Free Software Foundation; either version 2, or (at your option)
18 * any later version.
19 *
20 * This program is distributed in the hope that it will be useful,
21 * but WITHOUT ANY WARRANTY; without even the implied warranty of
22 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
23 * GNU General Public License for more details.
24 *
25 * You should have received a copy of the GNU General Public License
26 * along with this program; see the file COPYING.
27 * If not, write to the Free Software Foundation,
28 * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
29 */
30
31#ifndef _DEF_BF527_H
32#define _DEF_BF527_H
33
34/* Include all Core registers and bit definitions */
35#include <asm/def_LPBlackfin.h>
36
37/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF527 */
38
39/* Include defBF52x_base.h for the set of #defines that are common to all ADSP-BF52x processors */
40#include "defBF52x_base.h"
41
42/* The following are the #defines needed by ADSP-BF527 that are not in the common header */
43/* 10/100 Ethernet Controller (0xFFC03000 - 0xFFC031FF) */
44
45#define EMAC_OPMODE 0xFFC03000 /* Operating Mode Register */
46#define EMAC_ADDRLO 0xFFC03004 /* Address Low (32 LSBs) Register */
47#define EMAC_ADDRHI 0xFFC03008 /* Address High (16 MSBs) Register */
48#define EMAC_HASHLO 0xFFC0300C /* Multicast Hash Table Low (Bins 31-0) Register */
49#define EMAC_HASHHI 0xFFC03010 /* Multicast Hash Table High (Bins 63-32) Register */
50#define EMAC_STAADD 0xFFC03014 /* Station Management Address Register */
51#define EMAC_STADAT 0xFFC03018 /* Station Management Data Register */
52#define EMAC_FLC 0xFFC0301C /* Flow Control Register */
53#define EMAC_VLAN1 0xFFC03020 /* VLAN1 Tag Register */
54#define EMAC_VLAN2 0xFFC03024 /* VLAN2 Tag Register */
55#define EMAC_WKUP_CTL 0xFFC0302C /* Wake-Up Control/Status Register */
56#define EMAC_WKUP_FFMSK0 0xFFC03030 /* Wake-Up Frame Filter 0 Byte Mask Register */
57#define EMAC_WKUP_FFMSK1 0xFFC03034 /* Wake-Up Frame Filter 1 Byte Mask Register */
58#define EMAC_WKUP_FFMSK2 0xFFC03038 /* Wake-Up Frame Filter 2 Byte Mask Register */
59#define EMAC_WKUP_FFMSK3 0xFFC0303C /* Wake-Up Frame Filter 3 Byte Mask Register */
60#define EMAC_WKUP_FFCMD 0xFFC03040 /* Wake-Up Frame Filter Commands Register */
61#define EMAC_WKUP_FFOFF 0xFFC03044 /* Wake-Up Frame Filter Offsets Register */
62#define EMAC_WKUP_FFCRC0 0xFFC03048 /* Wake-Up Frame Filter 0,1 CRC-16 Register */
63#define EMAC_WKUP_FFCRC1 0xFFC0304C /* Wake-Up Frame Filter 2,3 CRC-16 Register */
64
65#define EMAC_SYSCTL 0xFFC03060 /* EMAC System Control Register */
66#define EMAC_SYSTAT 0xFFC03064 /* EMAC System Status Register */
67#define EMAC_RX_STAT 0xFFC03068 /* RX Current Frame Status Register */
68#define EMAC_RX_STKY 0xFFC0306C /* RX Sticky Frame Status Register */
69#define EMAC_RX_IRQE 0xFFC03070 /* RX Frame Status Interrupt Enables Register */
70#define EMAC_TX_STAT 0xFFC03074 /* TX Current Frame Status Register */
71#define EMAC_TX_STKY 0xFFC03078 /* TX Sticky Frame Status Register */
72#define EMAC_TX_IRQE 0xFFC0307C /* TX Frame Status Interrupt Enables Register */
73
74#define EMAC_MMC_CTL 0xFFC03080 /* MMC Counter Control Register */
75#define EMAC_MMC_RIRQS 0xFFC03084 /* MMC RX Interrupt Status Register */
76#define EMAC_MMC_RIRQE 0xFFC03088 /* MMC RX Interrupt Enables Register */
77#define EMAC_MMC_TIRQS 0xFFC0308C /* MMC TX Interrupt Status Register */
78#define EMAC_MMC_TIRQE 0xFFC03090 /* MMC TX Interrupt Enables Register */
79
80#define EMAC_RXC_OK 0xFFC03100 /* RX Frame Successful Count */
81#define EMAC_RXC_FCS 0xFFC03104 /* RX Frame FCS Failure Count */
82#define EMAC_RXC_ALIGN 0xFFC03108 /* RX Alignment Error Count */
83#define EMAC_RXC_OCTET 0xFFC0310C /* RX Octets Successfully Received Count */
84#define EMAC_RXC_DMAOVF 0xFFC03110 /* Internal MAC Sublayer Error RX Frame Count */
85#define EMAC_RXC_UNICST 0xFFC03114 /* Unicast RX Frame Count */
86#define EMAC_RXC_MULTI 0xFFC03118 /* Multicast RX Frame Count */
87#define EMAC_RXC_BROAD 0xFFC0311C /* Broadcast RX Frame Count */
88#define EMAC_RXC_LNERRI 0xFFC03120 /* RX Frame In Range Error Count */
89#define EMAC_RXC_LNERRO 0xFFC03124 /* RX Frame Out Of Range Error Count */
90#define EMAC_RXC_LONG 0xFFC03128 /* RX Frame Too Long Count */
91#define EMAC_RXC_MACCTL 0xFFC0312C /* MAC Control RX Frame Count */
92#define EMAC_RXC_OPCODE 0xFFC03130 /* Unsupported Op-Code RX Frame Count */
93#define EMAC_RXC_PAUSE 0xFFC03134 /* MAC Control Pause RX Frame Count */
94#define EMAC_RXC_ALLFRM 0xFFC03138 /* Overall RX Frame Count */
95#define EMAC_RXC_ALLOCT 0xFFC0313C /* Overall RX Octet Count */
96#define EMAC_RXC_TYPED 0xFFC03140 /* Type/Length Consistent RX Frame Count */
97#define EMAC_RXC_SHORT 0xFFC03144 /* RX Frame Fragment Count - Byte Count x < 64 */
98#define EMAC_RXC_EQ64 0xFFC03148 /* Good RX Frame Count - Byte Count x = 64 */
99#define EMAC_RXC_LT128 0xFFC0314C /* Good RX Frame Count - Byte Count 64 < x < 128 */
100#define EMAC_RXC_LT256 0xFFC03150 /* Good RX Frame Count - Byte Count 128 <= x < 256 */
101#define EMAC_RXC_LT512 0xFFC03154 /* Good RX Frame Count - Byte Count 256 <= x < 512 */
102#define EMAC_RXC_LT1024 0xFFC03158 /* Good RX Frame Count - Byte Count 512 <= x < 1024 */
103#define EMAC_RXC_GE1024 0xFFC0315C /* Good RX Frame Count - Byte Count x >= 1024 */
104
105#define EMAC_TXC_OK 0xFFC03180 /* TX Frame Successful Count */
106#define EMAC_TXC_1COL 0xFFC03184 /* TX Frames Successful After Single Collision Count */
107#define EMAC_TXC_GT1COL 0xFFC03188 /* TX Frames Successful After Multiple Collisions Count */
108#define EMAC_TXC_OCTET 0xFFC0318C /* TX Octets Successfully Received Count */
109#define EMAC_TXC_DEFER 0xFFC03190 /* TX Frame Delayed Due To Busy Count */
110#define EMAC_TXC_LATECL 0xFFC03194 /* Late TX Collisions Count */
111#define EMAC_TXC_XS_COL 0xFFC03198 /* TX Frame Failed Due To Excessive Collisions Count */
112#define EMAC_TXC_DMAUND 0xFFC0319C /* Internal MAC Sublayer Error TX Frame Count */
113#define EMAC_TXC_CRSERR 0xFFC031A0 /* Carrier Sense Deasserted During TX Frame Count */
114#define EMAC_TXC_UNICST 0xFFC031A4 /* Unicast TX Frame Count */
115#define EMAC_TXC_MULTI 0xFFC031A8 /* Multicast TX Frame Count */
116#define EMAC_TXC_BROAD 0xFFC031AC /* Broadcast TX Frame Count */
117#define EMAC_TXC_XS_DFR 0xFFC031B0 /* TX Frames With Excessive Deferral Count */
118#define EMAC_TXC_MACCTL 0xFFC031B4 /* MAC Control TX Frame Count */
119#define EMAC_TXC_ALLFRM 0xFFC031B8 /* Overall TX Frame Count */
120#define EMAC_TXC_ALLOCT 0xFFC031BC /* Overall TX Octet Count */
121#define EMAC_TXC_EQ64 0xFFC031C0 /* Good TX Frame Count - Byte Count x = 64 */
122#define EMAC_TXC_LT128 0xFFC031C4 /* Good TX Frame Count - Byte Count 64 < x < 128 */
123#define EMAC_TXC_LT256 0xFFC031C8 /* Good TX Frame Count - Byte Count 128 <= x < 256 */
124#define EMAC_TXC_LT512 0xFFC031CC /* Good TX Frame Count - Byte Count 256 <= x < 512 */
125#define EMAC_TXC_LT1024 0xFFC031D0 /* Good TX Frame Count - Byte Count 512 <= x < 1024 */
126#define EMAC_TXC_GE1024 0xFFC031D4 /* Good TX Frame Count - Byte Count x >= 1024 */
127#define EMAC_TXC_ABORT 0xFFC031D8 /* Total TX Frames Aborted Count */
128
129/* Listing for IEEE-Supported Count Registers */
130
131#define FramesReceivedOK EMAC_RXC_OK /* RX Frame Successful Count */
132#define FrameCheckSequenceErrors EMAC_RXC_FCS /* RX Frame FCS Failure Count */
133#define AlignmentErrors EMAC_RXC_ALIGN /* RX Alignment Error Count */
134#define OctetsReceivedOK EMAC_RXC_OCTET /* RX Octets Successfully Received Count */
135#define FramesLostDueToIntMACRcvError EMAC_RXC_DMAOVF /* Internal MAC Sublayer Error RX Frame Count */
136#define UnicastFramesReceivedOK EMAC_RXC_UNICST /* Unicast RX Frame Count */
137#define MulticastFramesReceivedOK EMAC_RXC_MULTI /* Multicast RX Frame Count */
138#define BroadcastFramesReceivedOK EMAC_RXC_BROAD /* Broadcast RX Frame Count */
139#define InRangeLengthErrors EMAC_RXC_LNERRI /* RX Frame In Range Error Count */
140#define OutOfRangeLengthField EMAC_RXC_LNERRO /* RX Frame Out Of Range Error Count */
141#define FrameTooLongErrors EMAC_RXC_LONG /* RX Frame Too Long Count */
142#define MACControlFramesReceived EMAC_RXC_MACCTL /* MAC Control RX Frame Count */
143#define UnsupportedOpcodesReceived EMAC_RXC_OPCODE /* Unsupported Op-Code RX Frame Count */
144#define PAUSEMACCtrlFramesReceived EMAC_RXC_PAUSE /* MAC Control Pause RX Frame Count */
145#define FramesReceivedAll EMAC_RXC_ALLFRM /* Overall RX Frame Count */
146#define OctetsReceivedAll EMAC_RXC_ALLOCT /* Overall RX Octet Count */
147#define TypedFramesReceived EMAC_RXC_TYPED /* Type/Length Consistent RX Frame Count */
148#define FramesLenLt64Received EMAC_RXC_SHORT /* RX Frame Fragment Count - Byte Count x < 64 */
149#define FramesLenEq64Received EMAC_RXC_EQ64 /* Good RX Frame Count - Byte Count x = 64 */
150#define FramesLen65_127Received EMAC_RXC_LT128 /* Good RX Frame Count - Byte Count 64 < x < 128 */
151#define FramesLen128_255Received EMAC_RXC_LT256 /* Good RX Frame Count - Byte Count 128 <= x < 256 */
152#define FramesLen256_511Received EMAC_RXC_LT512 /* Good RX Frame Count - Byte Count 256 <= x < 512 */
153#define FramesLen512_1023Received EMAC_RXC_LT1024 /* Good RX Frame Count - Byte Count 512 <= x < 1024 */
154#define FramesLen1024_MaxReceived EMAC_RXC_GE1024 /* Good RX Frame Count - Byte Count x >= 1024 */
155
156#define FramesTransmittedOK EMAC_TXC_OK /* TX Frame Successful Count */
157#define SingleCollisionFrames EMAC_TXC_1COL /* TX Frames Successful After Single Collision Count */
158#define MultipleCollisionFrames EMAC_TXC_GT1COL /* TX Frames Successful After Multiple Collisions Count */
159#define OctetsTransmittedOK EMAC_TXC_OCTET /* TX Octets Successfully Received Count */
160#define FramesWithDeferredXmissions EMAC_TXC_DEFER /* TX Frame Delayed Due To Busy Count */
161#define LateCollisions EMAC_TXC_LATECL /* Late TX Collisions Count */
162#define FramesAbortedDueToXSColls EMAC_TXC_XS_COL /* TX Frame Failed Due To Excessive Collisions Count */
163#define FramesLostDueToIntMacXmitError EMAC_TXC_DMAUND /* Internal MAC Sublayer Error TX Frame Count */
164#define CarrierSenseErrors EMAC_TXC_CRSERR /* Carrier Sense Deasserted During TX Frame Count */
165#define UnicastFramesXmittedOK EMAC_TXC_UNICST /* Unicast TX Frame Count */
166#define MulticastFramesXmittedOK EMAC_TXC_MULTI /* Multicast TX Frame Count */
167#define BroadcastFramesXmittedOK EMAC_TXC_BROAD /* Broadcast TX Frame Count */
168#define FramesWithExcessiveDeferral EMAC_TXC_XS_DFR /* TX Frames With Excessive Deferral Count */
169#define MACControlFramesTransmitted EMAC_TXC_MACCTL /* MAC Control TX Frame Count */
170#define FramesTransmittedAll EMAC_TXC_ALLFRM /* Overall TX Frame Count */
171#define OctetsTransmittedAll EMAC_TXC_ALLOCT /* Overall TX Octet Count */
172#define FramesLenEq64Transmitted EMAC_TXC_EQ64 /* Good TX Frame Count - Byte Count x = 64 */
173#define FramesLen65_127Transmitted EMAC_TXC_LT128 /* Good TX Frame Count - Byte Count 64 < x < 128 */
174#define FramesLen128_255Transmitted EMAC_TXC_LT256 /* Good TX Frame Count - Byte Count 128 <= x < 256 */
175#define FramesLen256_511Transmitted EMAC_TXC_LT512 /* Good TX Frame Count - Byte Count 256 <= x < 512 */
176#define FramesLen512_1023Transmitted EMAC_TXC_LT1024 /* Good TX Frame Count - Byte Count 512 <= x < 1024 */
177#define FramesLen1024_MaxTransmitted EMAC_TXC_GE1024 /* Good TX Frame Count - Byte Count x >= 1024 */
178#define TxAbortedFrames EMAC_TXC_ABORT /* Total TX Frames Aborted Count */
179
180/***********************************************************************************
181** System MMR Register Bits And Macros
182**
183** Disclaimer: All macros are intended to make C and Assembly code more readable.
184** Use these macros carefully, as any that do left shifts for field
185** depositing will result in the lower order bits being destroyed. Any
186** macro that shifts left to properly position the bit-field should be
187** used as part of an OR to initialize a register and NOT as a dynamic
188** modifier UNLESS the lower order bits are saved and ORed back in when
189** the macro is used.
190*************************************************************************************/
191
192/************************ ETHERNET 10/100 CONTROLLER MASKS ************************/
193
194/* EMAC_OPMODE Masks */
195
196#define RE 0x00000001 /* Receiver Enable */
197#define ASTP 0x00000002 /* Enable Automatic Pad Stripping On RX Frames */
198#define HU 0x00000010 /* Hash Filter Unicast Address */
199#define HM 0x00000020 /* Hash Filter Multicast Address */
200#define PAM 0x00000040 /* Pass-All-Multicast Mode Enable */
201#define PR 0x00000080 /* Promiscuous Mode Enable */
202#define IFE 0x00000100 /* Inverse Filtering Enable */
203#define DBF 0x00000200 /* Disable Broadcast Frame Reception */
204#define PBF 0x00000400 /* Pass Bad Frames Enable */
205#define PSF 0x00000800 /* Pass Short Frames Enable */
206#define RAF 0x00001000 /* Receive-All Mode */
207#define TE 0x00010000 /* Transmitter Enable */
208#define DTXPAD 0x00020000 /* Disable Automatic TX Padding */
209#define DTXCRC 0x00040000 /* Disable Automatic TX CRC Generation */
210#define DC 0x00080000 /* Deferral Check */
211#define BOLMT 0x00300000 /* Back-Off Limit */
212#define BOLMT_10 0x00000000 /* 10-bit range */
213#define BOLMT_8 0x00100000 /* 8-bit range */
214#define BOLMT_4 0x00200000 /* 4-bit range */
215#define BOLMT_1 0x00300000 /* 1-bit range */
216#define DRTY 0x00400000 /* Disable TX Retry On Collision */
217#define LCTRE 0x00800000 /* Enable TX Retry On Late Collision */
218#define RMII 0x01000000 /* RMII/MII* Mode */
219#define RMII_10 0x02000000 /* Speed Select for RMII Port (10MBit/100MBit*) */
220#define FDMODE 0x04000000 /* Duplex Mode Enable (Full/Half*) */
221#define LB 0x08000000 /* Internal Loopback Enable */
222#define DRO 0x10000000 /* Disable Receive Own Frames (Half-Duplex Mode) */
223
224/* EMAC_STAADD Masks */
225
226#define STABUSY 0x00000001 /* Initiate Station Mgt Reg Access / STA Busy Stat */
227#define STAOP 0x00000002 /* Station Management Operation Code (Write/Read*) */
228#define STADISPRE 0x00000004 /* Disable Preamble Generation */
229#define STAIE 0x00000008 /* Station Mgt. Transfer Done Interrupt Enable */
230#define REGAD 0x000007C0 /* STA Register Address */
231#define PHYAD 0x0000F800 /* PHY Device Address */
232
233#define SET_REGAD(x) (((x)&0x1F)<< 6 ) /* Set STA Register Address */
234#define SET_PHYAD(x) (((x)&0x1F)<< 11 ) /* Set PHY Device Address */
235
236/* EMAC_STADAT Mask */
237
238#define STADATA 0x0000FFFF /* Station Management Data */
239
240/* EMAC_FLC Masks */
241
242#define FLCBUSY 0x00000001 /* Send Flow Ctrl Frame / Flow Ctrl Busy Status */
243#define FLCE 0x00000002 /* Flow Control Enable */
244#define PCF 0x00000004 /* Pass Control Frames */
245#define BKPRSEN 0x00000008 /* Enable Backpressure */
246#define FLCPAUSE 0xFFFF0000 /* Pause Time */
247
248#define SET_FLCPAUSE(x) (((x)&0xFFFF)<< 16) /* Set Pause Time */
249
250/* EMAC_WKUP_CTL Masks */
251
252#define CAPWKFRM 0x00000001 /* Capture Wake-Up Frames */
253#define MPKE 0x00000002 /* Magic Packet Enable */
254#define RWKE 0x00000004 /* Remote Wake-Up Frame Enable */
255#define GUWKE 0x00000008 /* Global Unicast Wake Enable */
256#define MPKS 0x00000020 /* Magic Packet Received Status */
257#define RWKS 0x00000F00 /* Wake-Up Frame Received Status, Filters 3:0 */
258
259/* EMAC_WKUP_FFCMD Masks */
260
261#define WF0_E 0x00000001 /* Enable Wake-Up Filter 0 */
262#define WF0_T 0x00000008 /* Wake-Up Filter 0 Addr Type (Multicast/Unicast*) */
263#define WF1_E 0x00000100 /* Enable Wake-Up Filter 1 */
264#define WF1_T 0x00000800 /* Wake-Up Filter 1 Addr Type (Multicast/Unicast*) */
265#define WF2_E 0x00010000 /* Enable Wake-Up Filter 2 */
266#define WF2_T 0x00080000 /* Wake-Up Filter 2 Addr Type (Multicast/Unicast*) */
267#define WF3_E 0x01000000 /* Enable Wake-Up Filter 3 */
268#define WF3_T 0x08000000 /* Wake-Up Filter 3 Addr Type (Multicast/Unicast*) */
269
270/* EMAC_WKUP_FFOFF Masks */
271
272#define WF0_OFF 0x000000FF /* Wake-Up Filter 0 Pattern Offset */
273#define WF1_OFF 0x0000FF00 /* Wake-Up Filter 1 Pattern Offset */
274#define WF2_OFF 0x00FF0000 /* Wake-Up Filter 2 Pattern Offset */
275#define WF3_OFF 0xFF000000 /* Wake-Up Filter 3 Pattern Offset */
276
277#define SET_WF0_OFF(x) (((x)&0xFF)<< 0 ) /* Set Wake-Up Filter 0 Byte Offset */
278#define SET_WF1_OFF(x) (((x)&0xFF)<< 8 ) /* Set Wake-Up Filter 1 Byte Offset */
279#define SET_WF2_OFF(x) (((x)&0xFF)<< 16 ) /* Set Wake-Up Filter 2 Byte Offset */
280#define SET_WF3_OFF(x) (((x)&0xFF)<< 24 ) /* Set Wake-Up Filter 3 Byte Offset */
281/* Set ALL Offsets */
282#define SET_WF_OFFS(x0,x1,x2,x3) (SET_WF0_OFF((x0))|SET_WF1_OFF((x1))|SET_WF2_OFF((x2))|SET_WF3_OFF((x3)))
283
284/* EMAC_WKUP_FFCRC0 Masks */
285
286#define WF0_CRC 0x0000FFFF /* Wake-Up Filter 0 Pattern CRC */
287#define WF1_CRC 0xFFFF0000 /* Wake-Up Filter 1 Pattern CRC */
288
289#define SET_WF0_CRC(x) (((x)&0xFFFF)<< 0 ) /* Set Wake-Up Filter 0 Target CRC */
290#define SET_WF1_CRC(x) (((x)&0xFFFF)<< 16 ) /* Set Wake-Up Filter 1 Target CRC */
291
292/* EMAC_WKUP_FFCRC1 Masks */
293
294#define WF2_CRC 0x0000FFFF /* Wake-Up Filter 2 Pattern CRC */
295#define WF3_CRC 0xFFFF0000 /* Wake-Up Filter 3 Pattern CRC */
296
297#define SET_WF2_CRC(x) (((x)&0xFFFF)<< 0 ) /* Set Wake-Up Filter 2 Target CRC */
298#define SET_WF3_CRC(x) (((x)&0xFFFF)<< 16 ) /* Set Wake-Up Filter 3 Target CRC */
299
300/* EMAC_SYSCTL Masks */
301
302#define PHYIE 0x00000001 /* PHY_INT Interrupt Enable */
303#define RXDWA 0x00000002 /* Receive Frame DMA Word Alignment (Odd/Even*) */
304#define RXCKS 0x00000004 /* Enable RX Frame TCP/UDP Checksum Computation */
305#define TXDWA 0x00000010 /* Transmit Frame DMA Word Alignment (Odd/Even*) */
306#define MDCDIV 0x00003F00 /* SCLK:MDC Clock Divisor [MDC=SCLK/(2*(N+1))] */
307
308#define SET_MDCDIV(x) (((x)&0x3F)<< 8) /* Set MDC Clock Divisor */
309
310/* EMAC_SYSTAT Masks */
311
312#define PHYINT 0x00000001 /* PHY_INT Interrupt Status */
313#define MMCINT 0x00000002 /* MMC Counter Interrupt Status */
314#define RXFSINT 0x00000004 /* RX Frame-Status Interrupt Status */
315#define TXFSINT 0x00000008 /* TX Frame-Status Interrupt Status */
316#define WAKEDET 0x00000010 /* Wake-Up Detected Status */
317#define RXDMAERR 0x00000020 /* RX DMA Direction Error Status */
318#define TXDMAERR 0x00000040 /* TX DMA Direction Error Status */
319#define STMDONE 0x00000080 /* Station Mgt. Transfer Done Interrupt Status */
320
321/* EMAC_RX_STAT, EMAC_RX_STKY, and EMAC_RX_IRQE Masks */
322
323#define RX_FRLEN 0x000007FF /* Frame Length In Bytes */
324#define RX_COMP 0x00001000 /* RX Frame Complete */
325#define RX_OK 0x00002000 /* RX Frame Received With No Errors */
326#define RX_LONG 0x00004000 /* RX Frame Too Long Error */
327#define RX_ALIGN 0x00008000 /* RX Frame Alignment Error */
328#define RX_CRC 0x00010000 /* RX Frame CRC Error */
329#define RX_LEN 0x00020000 /* RX Frame Length Error */
330#define RX_FRAG 0x00040000 /* RX Frame Fragment Error */
331#define RX_ADDR 0x00080000 /* RX Frame Address Filter Failed Error */
332#define RX_DMAO 0x00100000 /* RX Frame DMA Overrun Error */
333#define RX_PHY 0x00200000 /* RX Frame PHY Error */
334#define RX_LATE 0x00400000 /* RX Frame Late Collision Error */
335#define RX_RANGE 0x00800000 /* RX Frame Length Field Out of Range Error */
336#define RX_MULTI 0x01000000 /* RX Multicast Frame Indicator */
337#define RX_BROAD 0x02000000 /* RX Broadcast Frame Indicator */
338#define RX_CTL 0x04000000 /* RX Control Frame Indicator */
339#define RX_UCTL 0x08000000 /* Unsupported RX Control Frame Indicator */
340#define RX_TYPE 0x10000000 /* RX Typed Frame Indicator */
341#define RX_VLAN1 0x20000000 /* RX VLAN1 Frame Indicator */
342#define RX_VLAN2 0x40000000 /* RX VLAN2 Frame Indicator */
343#define RX_ACCEPT 0x80000000 /* RX Frame Accepted Indicator */
344
345/* EMAC_TX_STAT, EMAC_TX_STKY, and EMAC_TX_IRQE Masks */
346
347#define TX_COMP 0x00000001 /* TX Frame Complete */
348#define TX_OK 0x00000002 /* TX Frame Sent With No Errors */
349#define TX_ECOLL 0x00000004 /* TX Frame Excessive Collision Error */
350#define TX_LATE 0x00000008 /* TX Frame Late Collision Error */
351#define TX_DMAU 0x00000010 /* TX Frame DMA Underrun Error (STAT) */
352#define TX_MACE 0x00000010 /* Internal MAC Error Detected (STKY and IRQE) */
353#define TX_EDEFER 0x00000020 /* TX Frame Excessive Deferral Error */
354#define TX_BROAD 0x00000040 /* TX Broadcast Frame Indicator */
355#define TX_MULTI 0x00000080 /* TX Multicast Frame Indicator */
356#define TX_CCNT 0x00000F00 /* TX Frame Collision Count */
357#define TX_DEFER 0x00001000 /* TX Frame Deferred Indicator */
358#define TX_CRS 0x00002000 /* TX Frame Carrier Sense Not Asserted Error */
359#define TX_LOSS 0x00004000 /* TX Frame Carrier Lost During TX Error */
360#define TX_RETRY 0x00008000 /* TX Frame Successful After Retry */
361#define TX_FRLEN 0x07FF0000 /* TX Frame Length (Bytes) */
362
363/* EMAC_MMC_CTL Masks */
364#define RSTC 0x00000001 /* Reset All Counters */
365#define CROLL 0x00000002 /* Counter Roll-Over Enable */
366#define CCOR 0x00000004 /* Counter Clear-On-Read Mode Enable */
367#define MMCE 0x00000008 /* Enable MMC Counter Operation */
368
369/* EMAC_MMC_RIRQS and EMAC_MMC_RIRQE Masks */
370#define RX_OK_CNT 0x00000001 /* RX Frames Received With No Errors */
371#define RX_FCS_CNT 0x00000002 /* RX Frames W/Frame Check Sequence Errors */
372#define RX_ALIGN_CNT 0x00000004 /* RX Frames With Alignment Errors */
373#define RX_OCTET_CNT 0x00000008 /* RX Octets Received OK */
374#define RX_LOST_CNT 0x00000010 /* RX Frames Lost Due To Internal MAC RX Error */
375#define RX_UNI_CNT 0x00000020 /* Unicast RX Frames Received OK */
376#define RX_MULTI_CNT 0x00000040 /* Multicast RX Frames Received OK */
377#define RX_BROAD_CNT 0x00000080 /* Broadcast RX Frames Received OK */
378#define RX_IRL_CNT 0x00000100 /* RX Frames With In-Range Length Errors */
379#define RX_ORL_CNT 0x00000200 /* RX Frames With Out-Of-Range Length Errors */
380#define RX_LONG_CNT 0x00000400 /* RX Frames With Frame Too Long Errors */
381#define RX_MACCTL_CNT 0x00000800 /* MAC Control RX Frames Received */
382#define RX_OPCODE_CTL 0x00001000 /* Unsupported Op-Code RX Frames Received */
383#define RX_PAUSE_CNT 0x00002000 /* PAUSEMAC Control RX Frames Received */
384#define RX_ALLF_CNT 0x00004000 /* All RX Frames Received */
385#define RX_ALLO_CNT 0x00008000 /* All RX Octets Received */
386#define RX_TYPED_CNT 0x00010000 /* Typed RX Frames Received */
387#define RX_SHORT_CNT 0x00020000 /* RX Frame Fragments (< 64 Bytes) Received */
388#define RX_EQ64_CNT 0x00040000 /* 64-Byte RX Frames Received */
389#define RX_LT128_CNT 0x00080000 /* 65-127-Byte RX Frames Received */
390#define RX_LT256_CNT 0x00100000 /* 128-255-Byte RX Frames Received */
391#define RX_LT512_CNT 0x00200000 /* 256-511-Byte RX Frames Received */
392#define RX_LT1024_CNT 0x00400000 /* 512-1023-Byte RX Frames Received */
393#define RX_GE1024_CNT 0x00800000 /* 1024-Max-Byte RX Frames Received */
394
395/* EMAC_MMC_TIRQS and EMAC_MMC_TIRQE Masks */
396
397#define TX_OK_CNT 0x00000001 /* TX Frames Sent OK */
398#define TX_SCOLL_CNT 0x00000002 /* TX Frames With Single Collisions */
399#define TX_MCOLL_CNT 0x00000004 /* TX Frames With Multiple Collisions */
400#define TX_OCTET_CNT 0x00000008 /* TX Octets Sent OK */
401#define TX_DEFER_CNT 0x00000010 /* TX Frames With Deferred Transmission */
402#define TX_LATE_CNT 0x00000020 /* TX Frames With Late Collisions */
403#define TX_ABORTC_CNT 0x00000040 /* TX Frames Aborted Due To Excess Collisions */
404#define TX_LOST_CNT 0x00000080 /* TX Frames Lost Due To Internal MAC TX Error */
405#define TX_CRS_CNT 0x00000100 /* TX Frames With Carrier Sense Errors */
406#define TX_UNI_CNT 0x00000200 /* Unicast TX Frames Sent */
407#define TX_MULTI_CNT 0x00000400 /* Multicast TX Frames Sent */
408#define TX_BROAD_CNT 0x00000800 /* Broadcast TX Frames Sent */
409#define TX_EXDEF_CTL 0x00001000 /* TX Frames With Excessive Deferral */
410#define TX_MACCTL_CNT 0x00002000 /* MAC Control TX Frames Sent */
411#define TX_ALLF_CNT 0x00004000 /* All TX Frames Sent */
412#define TX_ALLO_CNT 0x00008000 /* All TX Octets Sent */
413#define TX_EQ64_CNT 0x00010000 /* 64-Byte TX Frames Sent */
414#define TX_LT128_CNT 0x00020000 /* 65-127-Byte TX Frames Sent */
415#define TX_LT256_CNT 0x00040000 /* 128-255-Byte TX Frames Sent */
416#define TX_LT512_CNT 0x00080000 /* 256-511-Byte TX Frames Sent */
417#define TX_LT1024_CNT 0x00100000 /* 512-1023-Byte TX Frames Sent */
418#define TX_GE1024_CNT 0x00200000 /* 1024-Max-Byte TX Frames Sent */
419#define TX_ABORT_CNT 0x00400000 /* TX Frames Aborted */
420
421/* USB Control Registers */
422
423#define USB_FADDR 0xffc03800 /* Function address register */
424#define USB_POWER 0xffc03804 /* Power management register */
425#define USB_INTRTX 0xffc03808 /* Interrupt register for endpoint 0 and Tx endpoint 1 to 7 */
426#define USB_INTRRX 0xffc0380c /* Interrupt register for Rx endpoints 1 to 7 */
427#define USB_INTRTXE 0xffc03810 /* Interrupt enable register for IntrTx */
428#define USB_INTRRXE 0xffc03814 /* Interrupt enable register for IntrRx */
429#define USB_INTRUSB 0xffc03818 /* Interrupt register for common USB interrupts */
430#define USB_INTRUSBE 0xffc0381c /* Interrupt enable register for IntrUSB */
431#define USB_FRAME 0xffc03820 /* USB frame number */
432#define USB_INDEX 0xffc03824 /* Index register for selecting the indexed endpoint registers */
433#define USB_TESTMODE 0xffc03828 /* Enabled USB 20 test modes */
434#define USB_GLOBINTR 0xffc0382c /* Global Interrupt Mask register and Wakeup Exception Interrupt */
435#define USB_GLOBAL_CTL 0xffc03830 /* Global Clock Control for the core */
436
437/* USB Packet Control Registers */
438
439#define USB_TX_MAX_PACKET 0xffc03840 /* Maximum packet size for Host Tx endpoint */
440#define USB_CSR0 0xffc03844 /* Control Status register for endpoint 0 and Control Status register for Host Tx endpoint */
441#define USB_TXCSR 0xffc03844 /* Control Status register for endpoint 0 and Control Status register for Host Tx endpoint */
442#define USB_RX_MAX_PACKET 0xffc03848 /* Maximum packet size for Host Rx endpoint */
443#define USB_RXCSR 0xffc0384c /* Control Status register for Host Rx endpoint */
444#define USB_COUNT0 0xffc03850 /* Number of bytes received in endpoint 0 FIFO and Number of bytes received in Host Tx endpoint */
445#define USB_RXCOUNT 0xffc03850 /* Number of bytes received in endpoint 0 FIFO and Number of bytes received in Host Tx endpoint */
446#define USB_TXTYPE 0xffc03854 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint */
447#define USB_NAKLIMIT0 0xffc03858 /* Sets the NAK response timeout on Endpoint 0 and on Bulk transfers for Host Tx endpoint */
448#define USB_TXINTERVAL 0xffc03858 /* Sets the NAK response timeout on Endpoint 0 and on Bulk transfers for Host Tx endpoint */
449#define USB_RXTYPE 0xffc0385c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint */
450#define USB_RXINTERVAL 0xffc03860 /* Sets the polling interval for Interrupt and Isochronous transfers or the NAK response timeout on Bulk transfers */
451#define USB_TXCOUNT 0xffc03868 /* Number of bytes to be written to the selected endpoint Tx FIFO */
452
453/* USB Endpoint FIFO Registers */
454
455#define USB_EP0_FIFO 0xffc03880 /* Endpoint 0 FIFO */
456#define USB_EP1_FIFO 0xffc03888 /* Endpoint 1 FIFO */
457#define USB_EP2_FIFO 0xffc03890 /* Endpoint 2 FIFO */
458#define USB_EP3_FIFO 0xffc03898 /* Endpoint 3 FIFO */
459#define USB_EP4_FIFO 0xffc038a0 /* Endpoint 4 FIFO */
460#define USB_EP5_FIFO 0xffc038a8 /* Endpoint 5 FIFO */
461#define USB_EP6_FIFO 0xffc038b0 /* Endpoint 6 FIFO */
462#define USB_EP7_FIFO 0xffc038b8 /* Endpoint 7 FIFO */
463
464/* USB OTG Control Registers */
465
466#define USB_OTG_DEV_CTL 0xffc03900 /* OTG Device Control Register */
467#define USB_OTG_VBUS_IRQ 0xffc03904 /* OTG VBUS Control Interrupts */
468#define USB_OTG_VBUS_MASK 0xffc03908 /* VBUS Control Interrupt Enable */
469
470/* USB Phy Control Registers */
471
472#define USB_LINKINFO 0xffc03948 /* Enables programming of some PHY-side delays */
473#define USB_VPLEN 0xffc0394c /* Determines duration of VBUS pulse for VBUS charging */
474#define USB_HS_EOF1 0xffc03950 /* Time buffer for High-Speed transactions */
475#define USB_FS_EOF1 0xffc03954 /* Time buffer for Full-Speed transactions */
476#define USB_LS_EOF1 0xffc03958 /* Time buffer for Low-Speed transactions */
477
478/* (APHY_CNTRL is for ADI usage only) */
479
480#define USB_APHY_CNTRL 0xffc039e0 /* Register that increases visibility of Analog PHY */
481
482/* (APHY_CALIB is for ADI usage only) */
483
484#define USB_APHY_CALIB 0xffc039e4 /* Register used to set some calibration values */
485
486#define USB_APHY_CNTRL2 0xffc039e8 /* Register used to prevent re-enumeration once Moab goes into hibernate mode */
487
488/* (PHY_TEST is for ADI usage only) */
489
490#define USB_PHY_TEST 0xffc039ec /* Used for reducing simulation time and simplifies FIFO testability */
491
492#define USB_PLLOSC_CTRL 0xffc039f0 /* Used to program different parameters for USB PLL and Oscillator */
493#define USB_SRP_CLKDIV 0xffc039f4 /* Used to program clock divide value for the clock fed to the SRP detection logic */
494
495/* USB Endpoint 0 Control Registers */
496
497#define USB_EP_NI0_TXMAXP 0xffc03a00 /* Maximum packet size for Host Tx endpoint0 */
498#define USB_EP_NI0_TXCSR 0xffc03a04 /* Control Status register for endpoint 0 */
499#define USB_EP_NI0_RXMAXP 0xffc03a08 /* Maximum packet size for Host Rx endpoint0 */
500#define USB_EP_NI0_RXCSR 0xffc03a0c /* Control Status register for Host Rx endpoint0 */
501#define USB_EP_NI0_RXCOUNT 0xffc03a10 /* Number of bytes received in endpoint 0 FIFO */
502#define USB_EP_NI0_TXTYPE 0xffc03a14 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint0 */
503#define USB_EP_NI0_TXINTERVAL 0xffc03a18 /* Sets the NAK response timeout on Endpoint 0 */
504#define USB_EP_NI0_RXTYPE 0xffc03a1c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint0 */
505#define USB_EP_NI0_RXINTERVAL 0xffc03a20 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint0 */
506#define USB_EP_NI0_TXCOUNT 0xffc03a28 /* Number of bytes to be written to the endpoint0 Tx FIFO */
507
508/* USB Endpoint 1 Control Registers */
509
510#define USB_EP_NI1_TXMAXP 0xffc03a40 /* Maximum packet size for Host Tx endpoint1 */
511#define USB_EP_NI1_TXCSR 0xffc03a44 /* Control Status register for endpoint1 */
512#define USB_EP_NI1_RXMAXP 0xffc03a48 /* Maximum packet size for Host Rx endpoint1 */
513#define USB_EP_NI1_RXCSR 0xffc03a4c /* Control Status register for Host Rx endpoint1 */
514#define USB_EP_NI1_RXCOUNT 0xffc03a50 /* Number of bytes received in endpoint1 FIFO */
515#define USB_EP_NI1_TXTYPE 0xffc03a54 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint1 */
516#define USB_EP_NI1_TXINTERVAL 0xffc03a58 /* Sets the NAK response timeout on Endpoint1 */
517#define USB_EP_NI1_RXTYPE 0xffc03a5c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint1 */
518#define USB_EP_NI1_RXINTERVAL 0xffc03a60 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint1 */
519#define USB_EP_NI1_TXCOUNT 0xffc03a68 /* Number of bytes to be written to the+H102 endpoint1 Tx FIFO */
520
521/* USB Endpoint 2 Control Registers */
522
523#define USB_EP_NI2_TXMAXP 0xffc03a80 /* Maximum packet size for Host Tx endpoint2 */
524#define USB_EP_NI2_TXCSR 0xffc03a84 /* Control Status register for endpoint2 */
525#define USB_EP_NI2_RXMAXP 0xffc03a88 /* Maximum packet size for Host Rx endpoint2 */
526#define USB_EP_NI2_RXCSR 0xffc03a8c /* Control Status register for Host Rx endpoint2 */
527#define USB_EP_NI2_RXCOUNT 0xffc03a90 /* Number of bytes received in endpoint2 FIFO */
528#define USB_EP_NI2_TXTYPE 0xffc03a94 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint2 */
529#define USB_EP_NI2_TXINTERVAL 0xffc03a98 /* Sets the NAK response timeout on Endpoint2 */
530#define USB_EP_NI2_RXTYPE 0xffc03a9c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint2 */
531#define USB_EP_NI2_RXINTERVAL 0xffc03aa0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint2 */
532#define USB_EP_NI2_TXCOUNT 0xffc03aa8 /* Number of bytes to be written to the endpoint2 Tx FIFO */
533
534/* USB Endpoint 3 Control Registers */
535
536#define USB_EP_NI3_TXMAXP 0xffc03ac0 /* Maximum packet size for Host Tx endpoint3 */
537#define USB_EP_NI3_TXCSR 0xffc03ac4 /* Control Status register for endpoint3 */
538#define USB_EP_NI3_RXMAXP 0xffc03ac8 /* Maximum packet size for Host Rx endpoint3 */
539#define USB_EP_NI3_RXCSR 0xffc03acc /* Control Status register for Host Rx endpoint3 */
540#define USB_EP_NI3_RXCOUNT 0xffc03ad0 /* Number of bytes received in endpoint3 FIFO */
541#define USB_EP_NI3_TXTYPE 0xffc03ad4 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint3 */
542#define USB_EP_NI3_TXINTERVAL 0xffc03ad8 /* Sets the NAK response timeout on Endpoint3 */
543#define USB_EP_NI3_RXTYPE 0xffc03adc /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint3 */
544#define USB_EP_NI3_RXINTERVAL 0xffc03ae0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint3 */
545#define USB_EP_NI3_TXCOUNT 0xffc03ae8 /* Number of bytes to be written to the H124endpoint3 Tx FIFO */
546
547/* USB Endpoint 4 Control Registers */
548
549#define USB_EP_NI4_TXMAXP 0xffc03b00 /* Maximum packet size for Host Tx endpoint4 */
550#define USB_EP_NI4_TXCSR 0xffc03b04 /* Control Status register for endpoint4 */
551#define USB_EP_NI4_RXMAXP 0xffc03b08 /* Maximum packet size for Host Rx endpoint4 */
552#define USB_EP_NI4_RXCSR 0xffc03b0c /* Control Status register for Host Rx endpoint4 */
553#define USB_EP_NI4_RXCOUNT 0xffc03b10 /* Number of bytes received in endpoint4 FIFO */
554#define USB_EP_NI4_TXTYPE 0xffc03b14 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint4 */
555#define USB_EP_NI4_TXINTERVAL 0xffc03b18 /* Sets the NAK response timeout on Endpoint4 */
556#define USB_EP_NI4_RXTYPE 0xffc03b1c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint4 */
557#define USB_EP_NI4_RXINTERVAL 0xffc03b20 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint4 */
558#define USB_EP_NI4_TXCOUNT 0xffc03b28 /* Number of bytes to be written to the endpoint4 Tx FIFO */
559
560/* USB Endpoint 5 Control Registers */
561
562#define USB_EP_NI5_TXMAXP 0xffc03b40 /* Maximum packet size for Host Tx endpoint5 */
563#define USB_EP_NI5_TXCSR 0xffc03b44 /* Control Status register for endpoint5 */
564#define USB_EP_NI5_RXMAXP 0xffc03b48 /* Maximum packet size for Host Rx endpoint5 */
565#define USB_EP_NI5_RXCSR 0xffc03b4c /* Control Status register for Host Rx endpoint5 */
566#define USB_EP_NI5_RXCOUNT 0xffc03b50 /* Number of bytes received in endpoint5 FIFO */
567#define USB_EP_NI5_TXTYPE 0xffc03b54 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint5 */
568#define USB_EP_NI5_TXINTERVAL 0xffc03b58 /* Sets the NAK response timeout on Endpoint5 */
569#define USB_EP_NI5_RXTYPE 0xffc03b5c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint5 */
570#define USB_EP_NI5_RXINTERVAL 0xffc03b60 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint5 */
571#define USB_EP_NI5_TXCOUNT 0xffc03b68 /* Number of bytes to be written to the endpoint5 Tx FIFO */
572
573/* USB Endpoint 6 Control Registers */
574
575#define USB_EP_NI6_TXMAXP 0xffc03b80 /* Maximum packet size for Host Tx endpoint6 */
576#define USB_EP_NI6_TXCSR 0xffc03b84 /* Control Status register for endpoint6 */
577#define USB_EP_NI6_RXMAXP 0xffc03b88 /* Maximum packet size for Host Rx endpoint6 */
578#define USB_EP_NI6_RXCSR 0xffc03b8c /* Control Status register for Host Rx endpoint6 */
579#define USB_EP_NI6_RXCOUNT 0xffc03b90 /* Number of bytes received in endpoint6 FIFO */
580#define USB_EP_NI6_TXTYPE 0xffc03b94 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint6 */
581#define USB_EP_NI6_TXINTERVAL 0xffc03b98 /* Sets the NAK response timeout on Endpoint6 */
582#define USB_EP_NI6_RXTYPE 0xffc03b9c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint6 */
583#define USB_EP_NI6_RXINTERVAL 0xffc03ba0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint6 */
584#define USB_EP_NI6_TXCOUNT 0xffc03ba8 /* Number of bytes to be written to the endpoint6 Tx FIFO */
585
586/* USB Endpoint 7 Control Registers */
587
588#define USB_EP_NI7_TXMAXP 0xffc03bc0 /* Maximum packet size for Host Tx endpoint7 */
589#define USB_EP_NI7_TXCSR 0xffc03bc4 /* Control Status register for endpoint7 */
590#define USB_EP_NI7_RXMAXP 0xffc03bc8 /* Maximum packet size for Host Rx endpoint7 */
591#define USB_EP_NI7_RXCSR 0xffc03bcc /* Control Status register for Host Rx endpoint7 */
592#define USB_EP_NI7_RXCOUNT 0xffc03bd0 /* Number of bytes received in endpoint7 FIFO */
593#define USB_EP_NI7_TXTYPE 0xffc03bd4 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint7 */
594#define USB_EP_NI7_TXINTERVAL 0xffc03bd8 /* Sets the NAK response timeout on Endpoint7 */
595#define USB_EP_NI7_RXTYPE 0xffc03bdc /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint7 */
596#define USB_EP_NI7_RXINTERVAL 0xffc03bf0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint7 */
597#define USB_EP_NI7_TXCOUNT 0xffc03bf8 /* Number of bytes to be written to the endpoint7 Tx FIFO */
598
599#define USB_DMA_INTERRUPT 0xffc03c00 /* Indicates pending interrupts for the DMA channels */
600
601/* USB Channel 0 Config Registers */
602
603#define USB_DMA0CONTROL 0xffc03c04 /* DMA master channel 0 configuration */
604#define USB_DMA0ADDRLOW 0xffc03c08 /* Lower 16-bits of memory source/destination address for DMA master channel 0 */
605#define USB_DMA0ADDRHIGH 0xffc03c0c /* Upper 16-bits of memory source/destination address for DMA master channel 0 */
606#define USB_DMA0COUNTLOW 0xffc03c10 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 0 */
607#define USB_DMA0COUNTHIGH 0xffc03c14 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 0 */
608
609/* USB Channel 1 Config Registers */
610
611#define USB_DMA1CONTROL 0xffc03c24 /* DMA master channel 1 configuration */
612#define USB_DMA1ADDRLOW 0xffc03c28 /* Lower 16-bits of memory source/destination address for DMA master channel 1 */
613#define USB_DMA1ADDRHIGH 0xffc03c2c /* Upper 16-bits of memory source/destination address for DMA master channel 1 */
614#define USB_DMA1COUNTLOW 0xffc03c30 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 1 */
615#define USB_DMA1COUNTHIGH 0xffc03c34 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 1 */
616
617/* USB Channel 2 Config Registers */
618
619#define USB_DMA2CONTROL 0xffc03c44 /* DMA master channel 2 configuration */
620#define USB_DMA2ADDRLOW 0xffc03c48 /* Lower 16-bits of memory source/destination address for DMA master channel 2 */
621#define USB_DMA2ADDRHIGH 0xffc03c4c /* Upper 16-bits of memory source/destination address for DMA master channel 2 */
622#define USB_DMA2COUNTLOW 0xffc03c50 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 2 */
623#define USB_DMA2COUNTHIGH 0xffc03c54 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 2 */
624
625/* USB Channel 3 Config Registers */
626
627#define USB_DMA3CONTROL 0xffc03c64 /* DMA master channel 3 configuration */
628#define USB_DMA3ADDRLOW 0xffc03c68 /* Lower 16-bits of memory source/destination address for DMA master channel 3 */
629#define USB_DMA3ADDRHIGH 0xffc03c6c /* Upper 16-bits of memory source/destination address for DMA master channel 3 */
630#define USB_DMA3COUNTLOW 0xffc03c70 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 3 */
631#define USB_DMA3COUNTHIGH 0xffc03c74 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 3 */
632
633/* USB Channel 4 Config Registers */
634
635#define USB_DMA4CONTROL 0xffc03c84 /* DMA master channel 4 configuration */
636#define USB_DMA4ADDRLOW 0xffc03c88 /* Lower 16-bits of memory source/destination address for DMA master channel 4 */
637#define USB_DMA4ADDRHIGH 0xffc03c8c /* Upper 16-bits of memory source/destination address for DMA master channel 4 */
638#define USB_DMA4COUNTLOW 0xffc03c90 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 4 */
639#define USB_DMA4COUNTHIGH 0xffc03c94 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 4 */
640
641/* USB Channel 5 Config Registers */
642
643#define USB_DMA5CONTROL 0xffc03ca4 /* DMA master channel 5 configuration */
644#define USB_DMA5ADDRLOW 0xffc03ca8 /* Lower 16-bits of memory source/destination address for DMA master channel 5 */
645#define USB_DMA5ADDRHIGH 0xffc03cac /* Upper 16-bits of memory source/destination address for DMA master channel 5 */
646#define USB_DMA5COUNTLOW 0xffc03cb0 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 5 */
647#define USB_DMA5COUNTHIGH 0xffc03cb4 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 5 */
648
649/* USB Channel 6 Config Registers */
650
651#define USB_DMA6CONTROL 0xffc03cc4 /* DMA master channel 6 configuration */
652#define USB_DMA6ADDRLOW 0xffc03cc8 /* Lower 16-bits of memory source/destination address for DMA master channel 6 */
653#define USB_DMA6ADDRHIGH 0xffc03ccc /* Upper 16-bits of memory source/destination address for DMA master channel 6 */
654#define USB_DMA6COUNTLOW 0xffc03cd0 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 6 */
655#define USB_DMA6COUNTHIGH 0xffc03cd4 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 6 */
656
657/* USB Channel 7 Config Registers */
658
659#define USB_DMA7CONTROL 0xffc03ce4 /* DMA master channel 7 configuration */
660#define USB_DMA7ADDRLOW 0xffc03ce8 /* Lower 16-bits of memory source/destination address for DMA master channel 7 */
661#define USB_DMA7ADDRHIGH 0xffc03cec /* Upper 16-bits of memory source/destination address for DMA master channel 7 */
662#define USB_DMA7COUNTLOW 0xffc03cf0 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 7 */
663#define USB_DMA7COUNTHIGH 0xffc03cf4 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 7 */
664
665/* Bit masks for USB_FADDR */
666
667#define FUNCTION_ADDRESS 0x7f /* Function address */
668
669/* Bit masks for USB_POWER */
670
671#define ENABLE_SUSPENDM 0x1 /* enable SuspendM output */
672#define nENABLE_SUSPENDM 0x0
673#define SUSPEND_MODE 0x2 /* Suspend Mode indicator */
674#define nSUSPEND_MODE 0x0
675#define RESUME_MODE 0x4 /* DMA Mode */
676#define nRESUME_MODE 0x0
677#define RESET 0x8 /* Reset indicator */
678#define nRESET 0x0
679#define HS_MODE 0x10 /* High Speed mode indicator */
680#define nHS_MODE 0x0
681#define HS_ENABLE 0x20 /* high Speed Enable */
682#define nHS_ENABLE 0x0
683#define SOFT_CONN 0x40 /* Soft connect */
684#define nSOFT_CONN 0x0
685#define ISO_UPDATE 0x80 /* Isochronous update */
686#define nISO_UPDATE 0x0
687
688/* Bit masks for USB_INTRTX */
689
690#define EP0_TX 0x1 /* Tx Endpoint 0 interrupt */
691#define nEP0_TX 0x0
692#define EP1_TX 0x2 /* Tx Endpoint 1 interrupt */
693#define nEP1_TX 0x0
694#define EP2_TX 0x4 /* Tx Endpoint 2 interrupt */
695#define nEP2_TX 0x0
696#define EP3_TX 0x8 /* Tx Endpoint 3 interrupt */
697#define nEP3_TX 0x0
698#define EP4_TX 0x10 /* Tx Endpoint 4 interrupt */
699#define nEP4_TX 0x0
700#define EP5_TX 0x20 /* Tx Endpoint 5 interrupt */
701#define nEP5_TX 0x0
702#define EP6_TX 0x40 /* Tx Endpoint 6 interrupt */
703#define nEP6_TX 0x0
704#define EP7_TX 0x80 /* Tx Endpoint 7 interrupt */
705#define nEP7_TX 0x0
706
707/* Bit masks for USB_INTRRX */
708
709#define EP1_RX 0x2 /* Rx Endpoint 1 interrupt */
710#define nEP1_RX 0x0
711#define EP2_RX 0x4 /* Rx Endpoint 2 interrupt */
712#define nEP2_RX 0x0
713#define EP3_RX 0x8 /* Rx Endpoint 3 interrupt */
714#define nEP3_RX 0x0
715#define EP4_RX 0x10 /* Rx Endpoint 4 interrupt */
716#define nEP4_RX 0x0
717#define EP5_RX 0x20 /* Rx Endpoint 5 interrupt */
718#define nEP5_RX 0x0
719#define EP6_RX 0x40 /* Rx Endpoint 6 interrupt */
720#define nEP6_RX 0x0
721#define EP7_RX 0x80 /* Rx Endpoint 7 interrupt */
722#define nEP7_RX 0x0
723
724/* Bit masks for USB_INTRTXE */
725
726#define EP0_TX_E 0x1 /* Endpoint 0 interrupt Enable */
727#define nEP0_TX_E 0x0
728#define EP1_TX_E 0x2 /* Tx Endpoint 1 interrupt Enable */
729#define nEP1_TX_E 0x0
730#define EP2_TX_E 0x4 /* Tx Endpoint 2 interrupt Enable */
731#define nEP2_TX_E 0x0
732#define EP3_TX_E 0x8 /* Tx Endpoint 3 interrupt Enable */
733#define nEP3_TX_E 0x0
734#define EP4_TX_E 0x10 /* Tx Endpoint 4 interrupt Enable */
735#define nEP4_TX_E 0x0
736#define EP5_TX_E 0x20 /* Tx Endpoint 5 interrupt Enable */
737#define nEP5_TX_E 0x0
738#define EP6_TX_E 0x40 /* Tx Endpoint 6 interrupt Enable */
739#define nEP6_TX_E 0x0
740#define EP7_TX_E 0x80 /* Tx Endpoint 7 interrupt Enable */
741#define nEP7_TX_E 0x0
742
743/* Bit masks for USB_INTRRXE */
744
745#define EP1_RX_E 0x2 /* Rx Endpoint 1 interrupt Enable */
746#define nEP1_RX_E 0x0
747#define EP2_RX_E 0x4 /* Rx Endpoint 2 interrupt Enable */
748#define nEP2_RX_E 0x0
749#define EP3_RX_E 0x8 /* Rx Endpoint 3 interrupt Enable */
750#define nEP3_RX_E 0x0
751#define EP4_RX_E 0x10 /* Rx Endpoint 4 interrupt Enable */
752#define nEP4_RX_E 0x0
753#define EP5_RX_E 0x20 /* Rx Endpoint 5 interrupt Enable */
754#define nEP5_RX_E 0x0
755#define EP6_RX_E 0x40 /* Rx Endpoint 6 interrupt Enable */
756#define nEP6_RX_E 0x0
757#define EP7_RX_E 0x80 /* Rx Endpoint 7 interrupt Enable */
758#define nEP7_RX_E 0x0
759
760/* Bit masks for USB_INTRUSB */
761
762#define SUSPEND_B 0x1 /* Suspend indicator */
763#define nSUSPEND_B 0x0
764#define RESUME_B 0x2 /* Resume indicator */
765#define nRESUME_B 0x0
766#define RESET_OR_BABLE_B 0x4 /* Reset/babble indicator */
767#define nRESET_OR_BABLE_B 0x0
768#define SOF_B 0x8 /* Start of frame */
769#define nSOF_B 0x0
770#define CONN_B 0x10 /* Connection indicator */
771#define nCONN_B 0x0
772#define DISCON_B 0x20 /* Disconnect indicator */
773#define nDISCON_B 0x0
774#define SESSION_REQ_B 0x40 /* Session Request */
775#define nSESSION_REQ_B 0x0
776#define VBUS_ERROR_B 0x80 /* Vbus threshold indicator */
777#define nVBUS_ERROR_B 0x0
778
779/* Bit masks for USB_INTRUSBE */
780
781#define SUSPEND_BE 0x1 /* Suspend indicator int enable */
782#define nSUSPEND_BE 0x0
783#define RESUME_BE 0x2 /* Resume indicator int enable */
784#define nRESUME_BE 0x0
785#define RESET_OR_BABLE_BE 0x4 /* Reset/babble indicator int enable */
786#define nRESET_OR_BABLE_BE 0x0
787#define SOF_BE 0x8 /* Start of frame int enable */
788#define nSOF_BE 0x0
789#define CONN_BE 0x10 /* Connection indicator int enable */
790#define nCONN_BE 0x0
791#define DISCON_BE 0x20 /* Disconnect indicator int enable */
792#define nDISCON_BE 0x0
793#define SESSION_REQ_BE 0x40 /* Session Request int enable */
794#define nSESSION_REQ_BE 0x0
795#define VBUS_ERROR_BE 0x80 /* Vbus threshold indicator int enable */
796#define nVBUS_ERROR_BE 0x0
797
798/* Bit masks for USB_FRAME */
799
800#define FRAME_NUMBER 0x7ff /* Frame number */
801
802/* Bit masks for USB_INDEX */
803
804#define SELECTED_ENDPOINT 0xf /* selected endpoint */
805
806/* Bit masks for USB_GLOBAL_CTL */
807
808#define GLOBAL_ENA 0x1 /* enables USB module */
809#define nGLOBAL_ENA 0x0
810#define EP1_TX_ENA 0x2 /* Transmit endpoint 1 enable */
811#define nEP1_TX_ENA 0x0
812#define EP2_TX_ENA 0x4 /* Transmit endpoint 2 enable */
813#define nEP2_TX_ENA 0x0
814#define EP3_TX_ENA 0x8 /* Transmit endpoint 3 enable */
815#define nEP3_TX_ENA 0x0
816#define EP4_TX_ENA 0x10 /* Transmit endpoint 4 enable */
817#define nEP4_TX_ENA 0x0
818#define EP5_TX_ENA 0x20 /* Transmit endpoint 5 enable */
819#define nEP5_TX_ENA 0x0
820#define EP6_TX_ENA 0x40 /* Transmit endpoint 6 enable */
821#define nEP6_TX_ENA 0x0
822#define EP7_TX_ENA 0x80 /* Transmit endpoint 7 enable */
823#define nEP7_TX_ENA 0x0
824#define EP1_RX_ENA 0x100 /* Receive endpoint 1 enable */
825#define nEP1_RX_ENA 0x0
826#define EP2_RX_ENA 0x200 /* Receive endpoint 2 enable */
827#define nEP2_RX_ENA 0x0
828#define EP3_RX_ENA 0x400 /* Receive endpoint 3 enable */
829#define nEP3_RX_ENA 0x0
830#define EP4_RX_ENA 0x800 /* Receive endpoint 4 enable */
831#define nEP4_RX_ENA 0x0
832#define EP5_RX_ENA 0x1000 /* Receive endpoint 5 enable */
833#define nEP5_RX_ENA 0x0
834#define EP6_RX_ENA 0x2000 /* Receive endpoint 6 enable */
835#define nEP6_RX_ENA 0x0
836#define EP7_RX_ENA 0x4000 /* Receive endpoint 7 enable */
837#define nEP7_RX_ENA 0x0
838
839/* Bit masks for USB_OTG_DEV_CTL */
840
841#define SESSION 0x1 /* session indicator */
842#define nSESSION 0x0
843#define HOST_REQ 0x2 /* Host negotiation request */
844#define nHOST_REQ 0x0
845#define HOST_MODE 0x4 /* indicates USBDRC is a host */
846#define nHOST_MODE 0x0
847#define VBUS0 0x8 /* Vbus level indicator[0] */
848#define nVBUS0 0x0
849#define VBUS1 0x10 /* Vbus level indicator[1] */
850#define nVBUS1 0x0
851#define LSDEV 0x20 /* Low-speed indicator */
852#define nLSDEV 0x0
853#define FSDEV 0x40 /* Full or High-speed indicator */
854#define nFSDEV 0x0
855#define B_DEVICE 0x80 /* A' or 'B' device indicator */
856#define nB_DEVICE 0x0
857
858/* Bit masks for USB_OTG_VBUS_IRQ */
859
860#define DRIVE_VBUS_ON 0x1 /* indicator to drive VBUS control circuit */
861#define nDRIVE_VBUS_ON 0x0
862#define DRIVE_VBUS_OFF 0x2 /* indicator to shut off charge pump */
863#define nDRIVE_VBUS_OFF 0x0
864#define CHRG_VBUS_START 0x4 /* indicator for external circuit to start charging VBUS */
865#define nCHRG_VBUS_START 0x0
866#define CHRG_VBUS_END 0x8 /* indicator for external circuit to end charging VBUS */
867#define nCHRG_VBUS_END 0x0
868#define DISCHRG_VBUS_START 0x10 /* indicator to start discharging VBUS */
869#define nDISCHRG_VBUS_START 0x0
870#define DISCHRG_VBUS_END 0x20 /* indicator to stop discharging VBUS */
871#define nDISCHRG_VBUS_END 0x0
872
873/* Bit masks for USB_OTG_VBUS_MASK */
874
875#define DRIVE_VBUS_ON_ENA 0x1 /* enable DRIVE_VBUS_ON interrupt */
876#define nDRIVE_VBUS_ON_ENA 0x0
877#define DRIVE_VBUS_OFF_ENA 0x2 /* enable DRIVE_VBUS_OFF interrupt */
878#define nDRIVE_VBUS_OFF_ENA 0x0
879#define CHRG_VBUS_START_ENA 0x4 /* enable CHRG_VBUS_START interrupt */
880#define nCHRG_VBUS_START_ENA 0x0
881#define CHRG_VBUS_END_ENA 0x8 /* enable CHRG_VBUS_END interrupt */
882#define nCHRG_VBUS_END_ENA 0x0
883#define DISCHRG_VBUS_START_ENA 0x10 /* enable DISCHRG_VBUS_START interrupt */
884#define nDISCHRG_VBUS_START_ENA 0x0
885#define DISCHRG_VBUS_END_ENA 0x20 /* enable DISCHRG_VBUS_END interrupt */
886#define nDISCHRG_VBUS_END_ENA 0x0
887
888/* Bit masks for USB_CSR0 */
889
890#define RXPKTRDY 0x1 /* data packet receive indicator */
891#define nRXPKTRDY 0x0
892#define TXPKTRDY 0x2 /* data packet in FIFO indicator */
893#define nTXPKTRDY 0x0
894#define STALL_SENT 0x4 /* STALL handshake sent */
895#define nSTALL_SENT 0x0
896#define DATAEND 0x8 /* Data end indicator */
897#define nDATAEND 0x0
898#define SETUPEND 0x10 /* Setup end */
899#define nSETUPEND 0x0
900#define SENDSTALL 0x20 /* Send STALL handshake */
901#define nSENDSTALL 0x0
902#define SERVICED_RXPKTRDY 0x40 /* used to clear the RxPktRdy bit */
903#define nSERVICED_RXPKTRDY 0x0
904#define SERVICED_SETUPEND 0x80 /* used to clear the SetupEnd bit */
905#define nSERVICED_SETUPEND 0x0
906#define FLUSHFIFO 0x100 /* flush endpoint FIFO */
907#define nFLUSHFIFO 0x0
908#define STALL_RECEIVED_H 0x4 /* STALL handshake received host mode */
909#define nSTALL_RECEIVED_H 0x0
910#define SETUPPKT_H 0x8 /* send Setup token host mode */
911#define nSETUPPKT_H 0x0
912#define ERROR_H 0x10 /* timeout error indicator host mode */
913#define nERROR_H 0x0
914#define REQPKT_H 0x20 /* Request an IN transaction host mode */
915#define nREQPKT_H 0x0
916#define STATUSPKT_H 0x40 /* Status stage transaction host mode */
917#define nSTATUSPKT_H 0x0
918#define NAK_TIMEOUT_H 0x80 /* EP0 halted after a NAK host mode */
919#define nNAK_TIMEOUT_H 0x0
920
921/* Bit masks for USB_COUNT0 */
922
923#define EP0_RX_COUNT 0x7f /* number of received bytes in EP0 FIFO */
924
925/* Bit masks for USB_NAKLIMIT0 */
926
927#define EP0_NAK_LIMIT 0x1f /* number of frames/micro frames after which EP0 timeouts */
928
929/* Bit masks for USB_TX_MAX_PACKET */
930
931#define MAX_PACKET_SIZE_T 0x7ff /* maximum data pay load in a frame */
932
933/* Bit masks for USB_RX_MAX_PACKET */
934
935#define MAX_PACKET_SIZE_R 0x7ff /* maximum data pay load in a frame */
936
937/* Bit masks for USB_TXCSR */
938
939#define TXPKTRDY_T 0x1 /* data packet in FIFO indicator */
940#define nTXPKTRDY_T 0x0
941#define FIFO_NOT_EMPTY_T 0x2 /* FIFO not empty */
942#define nFIFO_NOT_EMPTY_T 0x0
943#define UNDERRUN_T 0x4 /* TxPktRdy not set for an IN token */
944#define nUNDERRUN_T 0x0
945#define FLUSHFIFO_T 0x8 /* flush endpoint FIFO */
946#define nFLUSHFIFO_T 0x0
947#define STALL_SEND_T 0x10 /* issue a Stall handshake */
948#define nSTALL_SEND_T 0x0
949#define STALL_SENT_T 0x20 /* Stall handshake transmitted */
950#define nSTALL_SENT_T 0x0
951#define CLEAR_DATATOGGLE_T 0x40 /* clear endpoint data toggle */
952#define nCLEAR_DATATOGGLE_T 0x0
953#define INCOMPTX_T 0x80 /* indicates that a large packet is split */
954#define nINCOMPTX_T 0x0
955#define DMAREQMODE_T 0x400 /* DMA mode (0 or 1) selection */
956#define nDMAREQMODE_T 0x0
957#define FORCE_DATATOGGLE_T 0x800 /* Force data toggle */
958#define nFORCE_DATATOGGLE_T 0x0
959#define DMAREQ_ENA_T 0x1000 /* Enable DMA request for Tx EP */
960#define nDMAREQ_ENA_T 0x0
961#define ISO_T 0x4000 /* enable Isochronous transfers */
962#define nISO_T 0x0
963#define AUTOSET_T 0x8000 /* allows TxPktRdy to be set automatically */
964#define nAUTOSET_T 0x0
965#define ERROR_TH 0x4 /* error condition host mode */
966#define nERROR_TH 0x0
967#define STALL_RECEIVED_TH 0x20 /* Stall handshake received host mode */
968#define nSTALL_RECEIVED_TH 0x0
969#define NAK_TIMEOUT_TH 0x80 /* NAK timeout host mode */
970#define nNAK_TIMEOUT_TH 0x0
971
972/* Bit masks for USB_TXCOUNT */
973
974#define TX_COUNT 0x1fff /* Number of bytes to be written to the selected endpoint Tx FIFO */
975
976/* Bit masks for USB_RXCSR */
977
978#define RXPKTRDY_R 0x1 /* data packet in FIFO indicator */
979#define nRXPKTRDY_R 0x0
980#define FIFO_FULL_R 0x2 /* FIFO not empty */
981#define nFIFO_FULL_R 0x0
982#define OVERRUN_R 0x4 /* TxPktRdy not set for an IN token */
983#define nOVERRUN_R 0x0
984#define DATAERROR_R 0x8 /* Out packet cannot be loaded into Rx FIFO */
985#define nDATAERROR_R 0x0
986#define FLUSHFIFO_R 0x10 /* flush endpoint FIFO */
987#define nFLUSHFIFO_R 0x0
988#define STALL_SEND_R 0x20 /* issue a Stall handshake */
989#define nSTALL_SEND_R 0x0
990#define STALL_SENT_R 0x40 /* Stall handshake transmitted */
991#define nSTALL_SENT_R 0x0
992#define CLEAR_DATATOGGLE_R 0x80 /* clear endpoint data toggle */
993#define nCLEAR_DATATOGGLE_R 0x0
994#define INCOMPRX_R 0x100 /* indicates that a large packet is split */
995#define nINCOMPRX_R 0x0
996#define DMAREQMODE_R 0x800 /* DMA mode (0 or 1) selection */
997#define nDMAREQMODE_R 0x0
998#define DISNYET_R 0x1000 /* disable Nyet handshakes */
999#define nDISNYET_R 0x0
1000#define DMAREQ_ENA_R 0x2000 /* Enable DMA request for Tx EP */
1001#define nDMAREQ_ENA_R 0x0
1002#define ISO_R 0x4000 /* enable Isochronous transfers */
1003#define nISO_R 0x0
1004#define AUTOCLEAR_R 0x8000 /* allows TxPktRdy to be set automatically */
1005#define nAUTOCLEAR_R 0x0
1006#define ERROR_RH 0x4 /* TxPktRdy not set for an IN token host mode */
1007#define nERROR_RH 0x0
1008#define REQPKT_RH 0x20 /* request an IN transaction host mode */
1009#define nREQPKT_RH 0x0
1010#define STALL_RECEIVED_RH 0x40 /* Stall handshake received host mode */
1011#define nSTALL_RECEIVED_RH 0x0
1012#define INCOMPRX_RH 0x100 /* indicates that a large packet is split host mode */
1013#define nINCOMPRX_RH 0x0
1014#define DMAREQMODE_RH 0x800 /* DMA mode (0 or 1) selection host mode */
1015#define nDMAREQMODE_RH 0x0
1016#define AUTOREQ_RH 0x4000 /* sets ReqPkt automatically host mode */
1017#define nAUTOREQ_RH 0x0
1018
1019/* Bit masks for USB_RXCOUNT */
1020
1021#define RX_COUNT 0x1fff /* Number of received bytes in the packet in the Rx FIFO */
1022
1023/* Bit masks for USB_TXTYPE */
1024
1025#define TARGET_EP_NO_T 0xf /* EP number */
1026#define PROTOCOL_T 0xc /* transfer type */
1027
1028/* Bit masks for USB_TXINTERVAL */
1029
1030#define TX_POLL_INTERVAL 0xff /* polling interval for selected Tx EP */
1031
1032/* Bit masks for USB_RXTYPE */
1033
1034#define TARGET_EP_NO_R 0xf /* EP number */
1035#define PROTOCOL_R 0xc /* transfer type */
1036
1037/* Bit masks for USB_RXINTERVAL */
1038
1039#define RX_POLL_INTERVAL 0xff /* polling interval for selected Rx EP */
1040
1041/* Bit masks for USB_DMA_INTERRUPT */
1042
1043#define DMA0_INT 0x1 /* DMA0 pending interrupt */
1044#define nDMA0_INT 0x0
1045#define DMA1_INT 0x2 /* DMA1 pending interrupt */
1046#define nDMA1_INT 0x0
1047#define DMA2_INT 0x4 /* DMA2 pending interrupt */
1048#define nDMA2_INT 0x0
1049#define DMA3_INT 0x8 /* DMA3 pending interrupt */
1050#define nDMA3_INT 0x0
1051#define DMA4_INT 0x10 /* DMA4 pending interrupt */
1052#define nDMA4_INT 0x0
1053#define DMA5_INT 0x20 /* DMA5 pending interrupt */
1054#define nDMA5_INT 0x0
1055#define DMA6_INT 0x40 /* DMA6 pending interrupt */
1056#define nDMA6_INT 0x0
1057#define DMA7_INT 0x80 /* DMA7 pending interrupt */
1058#define nDMA7_INT 0x0
1059
1060/* Bit masks for USB_DMAxCONTROL */
1061
1062#define DMA_ENA 0x1 /* DMA enable */
1063#define nDMA_ENA 0x0
1064#define DIRECTION 0x2 /* direction of DMA transfer */
1065#define nDIRECTION 0x0
1066#define MODE 0x4 /* DMA Bus error */
1067#define nMODE 0x0
1068#define INT_ENA 0x8 /* Interrupt enable */
1069#define nINT_ENA 0x0
1070#define EPNUM 0xf0 /* EP number */
1071#define BUSERROR 0x100 /* DMA Bus error */
1072#define nBUSERROR 0x0
1073
1074/* Bit masks for USB_DMAxADDRHIGH */
1075
1076#define DMA_ADDR_HIGH 0xffff /* Upper 16-bits of memory source/destination address for the DMA master channel */
1077
1078/* Bit masks for USB_DMAxADDRLOW */
1079
1080#define DMA_ADDR_LOW 0xffff /* Lower 16-bits of memory source/destination address for the DMA master channel */
1081
1082/* Bit masks for USB_DMAxCOUNTHIGH */
1083
1084#define DMA_COUNT_HIGH 0xffff /* Upper 16-bits of byte count of DMA transfer for DMA master channel */
1085
1086/* Bit masks for USB_DMAxCOUNTLOW */
1087
1088#define DMA_COUNT_LOW 0xffff /* Lower 16-bits of byte count of DMA transfer for DMA master channel */
1089
1090#endif /* _DEF_BF527_H */