diff options
Diffstat (limited to 'arch/blackfin/kernel')
34 files changed, 2297 insertions, 3018 deletions
diff --git a/arch/blackfin/kernel/Makefile b/arch/blackfin/kernel/Makefile index 606adc78aa85..38a233374f07 100644 --- a/arch/blackfin/kernel/Makefile +++ b/arch/blackfin/kernel/Makefile | |||
@@ -7,7 +7,7 @@ extra-y := init_task.o vmlinux.lds | |||
7 | obj-y := \ | 7 | obj-y := \ |
8 | entry.o process.o bfin_ksyms.o ptrace.o setup.o signal.o \ | 8 | entry.o process.o bfin_ksyms.o ptrace.o setup.o signal.o \ |
9 | sys_bfin.o traps.o irqchip.o dma-mapping.o flat.o \ | 9 | sys_bfin.o traps.o irqchip.o dma-mapping.o flat.o \ |
10 | fixed_code.o reboot.o bfin_gpio.o | 10 | fixed_code.o reboot.o bfin_gpio.o bfin_dma_5xx.o |
11 | 11 | ||
12 | ifeq ($(CONFIG_GENERIC_CLOCKEVENTS),y) | 12 | ifeq ($(CONFIG_GENERIC_CLOCKEVENTS),y) |
13 | obj-y += time-ts.o | 13 | obj-y += time-ts.o |
@@ -15,8 +15,11 @@ else | |||
15 | obj-y += time.o | 15 | obj-y += time.o |
16 | endif | 16 | endif |
17 | 17 | ||
18 | obj-$(CONFIG_IPIPE) += ipipe.o | ||
19 | obj-$(CONFIG_IPIPE_TRACE_MCOUNT) += mcount.o | ||
18 | obj-$(CONFIG_BFIN_GPTIMERS) += gptimers.o | 20 | obj-$(CONFIG_BFIN_GPTIMERS) += gptimers.o |
21 | obj-$(CONFIG_CPLB_INFO) += cplbinfo.o | ||
19 | obj-$(CONFIG_MODULES) += module.o | 22 | obj-$(CONFIG_MODULES) += module.o |
20 | obj-$(CONFIG_BFIN_DMA_5XX) += bfin_dma_5xx.o | ||
21 | obj-$(CONFIG_KGDB) += kgdb.o | 23 | obj-$(CONFIG_KGDB) += kgdb.o |
24 | obj-$(CONFIG_KGDB_TESTCASE) += kgdb_test.o | ||
22 | obj-$(CONFIG_EARLY_PRINTK) += early_printk.o | 25 | obj-$(CONFIG_EARLY_PRINTK) += early_printk.o |
diff --git a/arch/blackfin/kernel/asm-offsets.c b/arch/blackfin/kernel/asm-offsets.c index 9bb85dd5ccb3..b5df9459d6d5 100644 --- a/arch/blackfin/kernel/asm-offsets.c +++ b/arch/blackfin/kernel/asm-offsets.c | |||
@@ -56,6 +56,9 @@ int main(void) | |||
56 | /* offsets into the thread struct */ | 56 | /* offsets into the thread struct */ |
57 | DEFINE(THREAD_KSP, offsetof(struct thread_struct, ksp)); | 57 | DEFINE(THREAD_KSP, offsetof(struct thread_struct, ksp)); |
58 | DEFINE(THREAD_USP, offsetof(struct thread_struct, usp)); | 58 | DEFINE(THREAD_USP, offsetof(struct thread_struct, usp)); |
59 | DEFINE(THREAD_SR, offsetof(struct thread_struct, seqstat)); | ||
60 | DEFINE(PT_SR, offsetof(struct thread_struct, seqstat)); | ||
61 | DEFINE(THREAD_ESP0, offsetof(struct thread_struct, esp0)); | ||
59 | DEFINE(THREAD_PC, offsetof(struct thread_struct, pc)); | 62 | DEFINE(THREAD_PC, offsetof(struct thread_struct, pc)); |
60 | DEFINE(KERNEL_STACK_SIZE, THREAD_SIZE); | 63 | DEFINE(KERNEL_STACK_SIZE, THREAD_SIZE); |
61 | 64 | ||
@@ -128,5 +131,31 @@ int main(void) | |||
128 | DEFINE(SIGSEGV, SIGSEGV); | 131 | DEFINE(SIGSEGV, SIGSEGV); |
129 | DEFINE(SIGTRAP, SIGTRAP); | 132 | DEFINE(SIGTRAP, SIGTRAP); |
130 | 133 | ||
134 | /* PDA management (in L1 scratchpad) */ | ||
135 | DEFINE(PDA_SYSCFG, offsetof(struct blackfin_pda, syscfg)); | ||
136 | #ifdef CONFIG_SMP | ||
137 | DEFINE(PDA_IRQFLAGS, offsetof(struct blackfin_pda, imask)); | ||
138 | #endif | ||
139 | DEFINE(PDA_IPDT, offsetof(struct blackfin_pda, ipdt)); | ||
140 | DEFINE(PDA_IPDT_SWAPCOUNT, offsetof(struct blackfin_pda, ipdt_swapcount)); | ||
141 | DEFINE(PDA_DPDT, offsetof(struct blackfin_pda, dpdt)); | ||
142 | DEFINE(PDA_DPDT_SWAPCOUNT, offsetof(struct blackfin_pda, dpdt_swapcount)); | ||
143 | DEFINE(PDA_EXIPTR, offsetof(struct blackfin_pda, ex_iptr)); | ||
144 | DEFINE(PDA_EXOPTR, offsetof(struct blackfin_pda, ex_optr)); | ||
145 | DEFINE(PDA_EXBUF, offsetof(struct blackfin_pda, ex_buf)); | ||
146 | DEFINE(PDA_EXIMASK, offsetof(struct blackfin_pda, ex_imask)); | ||
147 | DEFINE(PDA_EXSTACK, offsetof(struct blackfin_pda, ex_stack)); | ||
148 | #ifdef ANOMALY_05000261 | ||
149 | DEFINE(PDA_LFRETX, offsetof(struct blackfin_pda, last_cplb_fault_retx)); | ||
150 | #endif | ||
151 | DEFINE(PDA_DCPLB, offsetof(struct blackfin_pda, dcplb_fault_addr)); | ||
152 | DEFINE(PDA_ICPLB, offsetof(struct blackfin_pda, icplb_fault_addr)); | ||
153 | DEFINE(PDA_RETX, offsetof(struct blackfin_pda, retx)); | ||
154 | DEFINE(PDA_SEQSTAT, offsetof(struct blackfin_pda, seqstat)); | ||
155 | #ifdef CONFIG_SMP | ||
156 | /* Inter-core lock (in L2 SRAM) */ | ||
157 | DEFINE(SIZEOF_CORELOCK, sizeof(struct corelock_slot)); | ||
158 | #endif | ||
159 | |||
131 | return 0; | 160 | return 0; |
132 | } | 161 | } |
diff --git a/arch/blackfin/kernel/bfin_dma_5xx.c b/arch/blackfin/kernel/bfin_dma_5xx.c index 339293d677cc..07e02c0d1c07 100644 --- a/arch/blackfin/kernel/bfin_dma_5xx.c +++ b/arch/blackfin/kernel/bfin_dma_5xx.c | |||
@@ -1,63 +1,27 @@ | |||
1 | /* | 1 | /* |
2 | * File: arch/blackfin/kernel/bfin_dma_5xx.c | 2 | * bfin_dma_5xx.c - Blackfin DMA implementation |
3 | * Based on: | ||
4 | * Author: | ||
5 | * | 3 | * |
6 | * Created: | 4 | * Copyright 2004-2008 Analog Devices Inc. |
7 | * Description: This file contains the simple DMA Implementation for Blackfin | 5 | * Licensed under the GPL-2 or later. |
8 | * | ||
9 | * Modified: | ||
10 | * Copyright 2004-2006 Analog Devices Inc. | ||
11 | * | ||
12 | * Bugs: Enter bugs at http://blackfin.uclinux.org/ | ||
13 | * | ||
14 | * This program is free software; you can redistribute it and/or modify | ||
15 | * it under the terms of the GNU General Public License as published by | ||
16 | * the Free Software Foundation; either version 2 of the License, or | ||
17 | * (at your option) any later version. | ||
18 | * | ||
19 | * This program is distributed in the hope that it will be useful, | ||
20 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | ||
21 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | ||
22 | * GNU General Public License for more details. | ||
23 | * | ||
24 | * You should have received a copy of the GNU General Public License | ||
25 | * along with this program; if not, see the file COPYING, or write | ||
26 | * to the Free Software Foundation, Inc., | ||
27 | * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA | ||
28 | */ | 6 | */ |
29 | 7 | ||
30 | #include <linux/errno.h> | 8 | #include <linux/errno.h> |
31 | #include <linux/module.h> | ||
32 | #include <linux/sched.h> | ||
33 | #include <linux/interrupt.h> | 9 | #include <linux/interrupt.h> |
34 | #include <linux/kernel.h> | 10 | #include <linux/kernel.h> |
11 | #include <linux/module.h> | ||
35 | #include <linux/param.h> | 12 | #include <linux/param.h> |
13 | #include <linux/proc_fs.h> | ||
14 | #include <linux/sched.h> | ||
15 | #include <linux/seq_file.h> | ||
16 | #include <linux/spinlock.h> | ||
36 | 17 | ||
37 | #include <asm/blackfin.h> | 18 | #include <asm/blackfin.h> |
38 | #include <asm/dma.h> | ||
39 | #include <asm/cacheflush.h> | 19 | #include <asm/cacheflush.h> |
20 | #include <asm/dma.h> | ||
21 | #include <asm/uaccess.h> | ||
40 | 22 | ||
41 | /* Remove unused code not exported by symbol or internally called */ | 23 | struct dma_channel dma_ch[MAX_DMA_CHANNELS]; |
42 | #define REMOVE_DEAD_CODE | 24 | EXPORT_SYMBOL(dma_ch); |
43 | |||
44 | /************************************************************************** | ||
45 | * Global Variables | ||
46 | ***************************************************************************/ | ||
47 | |||
48 | static struct dma_channel dma_ch[MAX_BLACKFIN_DMA_CHANNEL]; | ||
49 | |||
50 | /*------------------------------------------------------------------------------ | ||
51 | * Set the Buffer Clear bit in the Configuration register of specific DMA | ||
52 | * channel. This will stop the descriptor based DMA operation. | ||
53 | *-----------------------------------------------------------------------------*/ | ||
54 | static void clear_dma_buffer(unsigned int channel) | ||
55 | { | ||
56 | dma_ch[channel].regs->cfg |= RESTART; | ||
57 | SSYNC(); | ||
58 | dma_ch[channel].regs->cfg &= ~RESTART; | ||
59 | SSYNC(); | ||
60 | } | ||
61 | 25 | ||
62 | static int __init blackfin_dma_init(void) | 26 | static int __init blackfin_dma_init(void) |
63 | { | 27 | { |
@@ -65,32 +29,67 @@ static int __init blackfin_dma_init(void) | |||
65 | 29 | ||
66 | printk(KERN_INFO "Blackfin DMA Controller\n"); | 30 | printk(KERN_INFO "Blackfin DMA Controller\n"); |
67 | 31 | ||
68 | for (i = 0; i < MAX_BLACKFIN_DMA_CHANNEL; i++) { | 32 | for (i = 0; i < MAX_DMA_CHANNELS; i++) { |
69 | dma_ch[i].chan_status = DMA_CHANNEL_FREE; | 33 | dma_ch[i].chan_status = DMA_CHANNEL_FREE; |
70 | dma_ch[i].regs = dma_io_base_addr[i]; | 34 | dma_ch[i].regs = dma_io_base_addr[i]; |
71 | mutex_init(&(dma_ch[i].dmalock)); | 35 | mutex_init(&(dma_ch[i].dmalock)); |
72 | } | 36 | } |
73 | /* Mark MEMDMA Channel 0 as requested since we're using it internally */ | 37 | /* Mark MEMDMA Channel 0 as requested since we're using it internally */ |
74 | dma_ch[CH_MEM_STREAM0_DEST].chan_status = DMA_CHANNEL_REQUESTED; | 38 | request_dma(CH_MEM_STREAM0_DEST, "Blackfin dma_memcpy"); |
75 | dma_ch[CH_MEM_STREAM0_SRC].chan_status = DMA_CHANNEL_REQUESTED; | 39 | request_dma(CH_MEM_STREAM0_SRC, "Blackfin dma_memcpy"); |
76 | 40 | ||
77 | #if defined(CONFIG_DEB_DMA_URGENT) | 41 | #if defined(CONFIG_DEB_DMA_URGENT) |
78 | bfin_write_EBIU_DDRQUE(bfin_read_EBIU_DDRQUE() | 42 | bfin_write_EBIU_DDRQUE(bfin_read_EBIU_DDRQUE() |
79 | | DEB1_URGENT | DEB2_URGENT | DEB3_URGENT); | 43 | | DEB1_URGENT | DEB2_URGENT | DEB3_URGENT); |
80 | #endif | 44 | #endif |
45 | |||
81 | return 0; | 46 | return 0; |
82 | } | 47 | } |
83 | |||
84 | arch_initcall(blackfin_dma_init); | 48 | arch_initcall(blackfin_dma_init); |
85 | 49 | ||
86 | /*------------------------------------------------------------------------------ | 50 | #ifdef CONFIG_PROC_FS |
87 | * Request the specific DMA channel from the system. | 51 | static int proc_dma_show(struct seq_file *m, void *v) |
88 | *-----------------------------------------------------------------------------*/ | ||
89 | int request_dma(unsigned int channel, char *device_id) | ||
90 | { | 52 | { |
53 | int i; | ||
54 | |||
55 | for (i = 0; i < MAX_DMA_CHANNELS; ++i) | ||
56 | if (dma_ch[i].chan_status != DMA_CHANNEL_FREE) | ||
57 | seq_printf(m, "%2d: %s\n", i, dma_ch[i].device_id); | ||
58 | |||
59 | return 0; | ||
60 | } | ||
91 | 61 | ||
62 | static int proc_dma_open(struct inode *inode, struct file *file) | ||
63 | { | ||
64 | return single_open(file, proc_dma_show, NULL); | ||
65 | } | ||
66 | |||
67 | static const struct file_operations proc_dma_operations = { | ||
68 | .open = proc_dma_open, | ||
69 | .read = seq_read, | ||
70 | .llseek = seq_lseek, | ||
71 | .release = single_release, | ||
72 | }; | ||
73 | |||
74 | static int __init proc_dma_init(void) | ||
75 | { | ||
76 | return proc_create("dma", 0, NULL, &proc_dma_operations) != NULL; | ||
77 | } | ||
78 | late_initcall(proc_dma_init); | ||
79 | #endif | ||
80 | |||
81 | /** | ||
82 | * request_dma - request a DMA channel | ||
83 | * | ||
84 | * Request the specific DMA channel from the system if it's available. | ||
85 | */ | ||
86 | int request_dma(unsigned int channel, const char *device_id) | ||
87 | { | ||
92 | pr_debug("request_dma() : BEGIN \n"); | 88 | pr_debug("request_dma() : BEGIN \n"); |
93 | 89 | ||
90 | if (device_id == NULL) | ||
91 | printk(KERN_WARNING "request_dma(%u): no device_id given\n", channel); | ||
92 | |||
94 | #if defined(CONFIG_BF561) && ANOMALY_05000182 | 93 | #if defined(CONFIG_BF561) && ANOMALY_05000182 |
95 | if (channel >= CH_IMEM_STREAM0_DEST && channel <= CH_IMEM_STREAM1_DEST) { | 94 | if (channel >= CH_IMEM_STREAM0_DEST && channel <= CH_IMEM_STREAM1_DEST) { |
96 | if (get_cclk() > 500000000) { | 95 | if (get_cclk() > 500000000) { |
@@ -129,60 +128,63 @@ int request_dma(unsigned int channel, char *device_id) | |||
129 | #endif | 128 | #endif |
130 | 129 | ||
131 | dma_ch[channel].device_id = device_id; | 130 | dma_ch[channel].device_id = device_id; |
132 | dma_ch[channel].irq_callback = NULL; | 131 | dma_ch[channel].irq = 0; |
133 | 132 | ||
134 | /* This is to be enabled by putting a restriction - | 133 | /* This is to be enabled by putting a restriction - |
135 | * you have to request DMA, before doing any operations on | 134 | * you have to request DMA, before doing any operations on |
136 | * descriptor/channel | 135 | * descriptor/channel |
137 | */ | 136 | */ |
138 | pr_debug("request_dma() : END \n"); | 137 | pr_debug("request_dma() : END \n"); |
139 | return channel; | 138 | return 0; |
140 | } | 139 | } |
141 | EXPORT_SYMBOL(request_dma); | 140 | EXPORT_SYMBOL(request_dma); |
142 | 141 | ||
143 | int set_dma_callback(unsigned int channel, dma_interrupt_t callback, void *data) | 142 | int set_dma_callback(unsigned int channel, irq_handler_t callback, void *data) |
144 | { | 143 | { |
145 | int ret_irq = 0; | ||
146 | |||
147 | BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE | 144 | BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE |
148 | && channel < MAX_BLACKFIN_DMA_CHANNEL)); | 145 | && channel < MAX_DMA_CHANNELS)); |
149 | 146 | ||
150 | if (callback != NULL) { | 147 | if (callback != NULL) { |
151 | int ret_val; | 148 | int ret; |
152 | ret_irq = channel2irq(channel); | 149 | unsigned int irq = channel2irq(channel); |
153 | 150 | ||
154 | dma_ch[channel].data = data; | 151 | ret = request_irq(irq, callback, IRQF_DISABLED, |
152 | dma_ch[channel].device_id, data); | ||
153 | if (ret) | ||
154 | return ret; | ||
155 | 155 | ||
156 | ret_val = | 156 | dma_ch[channel].irq = irq; |
157 | request_irq(ret_irq, (void *)callback, IRQF_DISABLED, | 157 | dma_ch[channel].data = data; |
158 | dma_ch[channel].device_id, data); | ||
159 | if (ret_val) { | ||
160 | printk(KERN_NOTICE | ||
161 | "Request irq in DMA engine failed.\n"); | ||
162 | return -EPERM; | ||
163 | } | ||
164 | dma_ch[channel].irq_callback = callback; | ||
165 | } | 158 | } |
166 | return 0; | 159 | return 0; |
167 | } | 160 | } |
168 | EXPORT_SYMBOL(set_dma_callback); | 161 | EXPORT_SYMBOL(set_dma_callback); |
169 | 162 | ||
170 | void free_dma(unsigned int channel) | 163 | /** |
164 | * clear_dma_buffer - clear DMA fifos for specified channel | ||
165 | * | ||
166 | * Set the Buffer Clear bit in the Configuration register of specific DMA | ||
167 | * channel. This will stop the descriptor based DMA operation. | ||
168 | */ | ||
169 | static void clear_dma_buffer(unsigned int channel) | ||
171 | { | 170 | { |
172 | int ret_irq; | 171 | dma_ch[channel].regs->cfg |= RESTART; |
172 | SSYNC(); | ||
173 | dma_ch[channel].regs->cfg &= ~RESTART; | ||
174 | } | ||
173 | 175 | ||
176 | void free_dma(unsigned int channel) | ||
177 | { | ||
174 | pr_debug("freedma() : BEGIN \n"); | 178 | pr_debug("freedma() : BEGIN \n"); |
175 | BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE | 179 | BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE |
176 | && channel < MAX_BLACKFIN_DMA_CHANNEL)); | 180 | && channel < MAX_DMA_CHANNELS)); |
177 | 181 | ||
178 | /* Halt the DMA */ | 182 | /* Halt the DMA */ |
179 | disable_dma(channel); | 183 | disable_dma(channel); |
180 | clear_dma_buffer(channel); | 184 | clear_dma_buffer(channel); |
181 | 185 | ||
182 | if (dma_ch[channel].irq_callback != NULL) { | 186 | if (dma_ch[channel].irq) |
183 | ret_irq = channel2irq(channel); | 187 | free_irq(dma_ch[channel].irq, dma_ch[channel].data); |
184 | free_irq(ret_irq, dma_ch[channel].data); | ||
185 | } | ||
186 | 188 | ||
187 | /* Clear the DMA Variable in the Channel */ | 189 | /* Clear the DMA Variable in the Channel */ |
188 | mutex_lock(&(dma_ch[channel].dmalock)); | 190 | mutex_lock(&(dma_ch[channel].dmalock)); |
@@ -193,294 +195,15 @@ void free_dma(unsigned int channel) | |||
193 | } | 195 | } |
194 | EXPORT_SYMBOL(free_dma); | 196 | EXPORT_SYMBOL(free_dma); |
195 | 197 | ||
196 | void dma_enable_irq(unsigned int channel) | ||
197 | { | ||
198 | int ret_irq; | ||
199 | |||
200 | pr_debug("dma_enable_irq() : BEGIN \n"); | ||
201 | BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE | ||
202 | && channel < MAX_BLACKFIN_DMA_CHANNEL)); | ||
203 | |||
204 | ret_irq = channel2irq(channel); | ||
205 | enable_irq(ret_irq); | ||
206 | } | ||
207 | EXPORT_SYMBOL(dma_enable_irq); | ||
208 | |||
209 | void dma_disable_irq(unsigned int channel) | ||
210 | { | ||
211 | int ret_irq; | ||
212 | |||
213 | pr_debug("dma_disable_irq() : BEGIN \n"); | ||
214 | BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE | ||
215 | && channel < MAX_BLACKFIN_DMA_CHANNEL)); | ||
216 | |||
217 | ret_irq = channel2irq(channel); | ||
218 | disable_irq(ret_irq); | ||
219 | } | ||
220 | EXPORT_SYMBOL(dma_disable_irq); | ||
221 | |||
222 | int dma_channel_active(unsigned int channel) | ||
223 | { | ||
224 | if (dma_ch[channel].chan_status == DMA_CHANNEL_FREE) { | ||
225 | return 0; | ||
226 | } else { | ||
227 | return 1; | ||
228 | } | ||
229 | } | ||
230 | EXPORT_SYMBOL(dma_channel_active); | ||
231 | |||
232 | /*------------------------------------------------------------------------------ | ||
233 | * stop the specific DMA channel. | ||
234 | *-----------------------------------------------------------------------------*/ | ||
235 | void disable_dma(unsigned int channel) | ||
236 | { | ||
237 | pr_debug("stop_dma() : BEGIN \n"); | ||
238 | |||
239 | BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE | ||
240 | && channel < MAX_BLACKFIN_DMA_CHANNEL)); | ||
241 | |||
242 | dma_ch[channel].regs->cfg &= ~DMAEN; /* Clean the enable bit */ | ||
243 | SSYNC(); | ||
244 | dma_ch[channel].chan_status = DMA_CHANNEL_REQUESTED; | ||
245 | /* Needs to be enabled Later */ | ||
246 | pr_debug("stop_dma() : END \n"); | ||
247 | return; | ||
248 | } | ||
249 | EXPORT_SYMBOL(disable_dma); | ||
250 | |||
251 | void enable_dma(unsigned int channel) | ||
252 | { | ||
253 | pr_debug("enable_dma() : BEGIN \n"); | ||
254 | |||
255 | BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE | ||
256 | && channel < MAX_BLACKFIN_DMA_CHANNEL)); | ||
257 | |||
258 | dma_ch[channel].chan_status = DMA_CHANNEL_ENABLED; | ||
259 | dma_ch[channel].regs->curr_x_count = 0; | ||
260 | dma_ch[channel].regs->curr_y_count = 0; | ||
261 | |||
262 | dma_ch[channel].regs->cfg |= DMAEN; /* Set the enable bit */ | ||
263 | SSYNC(); | ||
264 | pr_debug("enable_dma() : END \n"); | ||
265 | return; | ||
266 | } | ||
267 | EXPORT_SYMBOL(enable_dma); | ||
268 | |||
269 | /*------------------------------------------------------------------------------ | ||
270 | * Set the Start Address register for the specific DMA channel | ||
271 | * This function can be used for register based DMA, | ||
272 | * to setup the start address | ||
273 | * addr: Starting address of the DMA Data to be transferred. | ||
274 | *-----------------------------------------------------------------------------*/ | ||
275 | void set_dma_start_addr(unsigned int channel, unsigned long addr) | ||
276 | { | ||
277 | pr_debug("set_dma_start_addr() : BEGIN \n"); | ||
278 | |||
279 | BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE | ||
280 | && channel < MAX_BLACKFIN_DMA_CHANNEL)); | ||
281 | |||
282 | dma_ch[channel].regs->start_addr = addr; | ||
283 | SSYNC(); | ||
284 | pr_debug("set_dma_start_addr() : END\n"); | ||
285 | } | ||
286 | EXPORT_SYMBOL(set_dma_start_addr); | ||
287 | |||
288 | void set_dma_next_desc_addr(unsigned int channel, unsigned long addr) | ||
289 | { | ||
290 | pr_debug("set_dma_next_desc_addr() : BEGIN \n"); | ||
291 | |||
292 | BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE | ||
293 | && channel < MAX_BLACKFIN_DMA_CHANNEL)); | ||
294 | |||
295 | dma_ch[channel].regs->next_desc_ptr = addr; | ||
296 | SSYNC(); | ||
297 | pr_debug("set_dma_next_desc_addr() : END\n"); | ||
298 | } | ||
299 | EXPORT_SYMBOL(set_dma_next_desc_addr); | ||
300 | |||
301 | void set_dma_curr_desc_addr(unsigned int channel, unsigned long addr) | ||
302 | { | ||
303 | pr_debug("set_dma_curr_desc_addr() : BEGIN \n"); | ||
304 | |||
305 | BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE | ||
306 | && channel < MAX_BLACKFIN_DMA_CHANNEL)); | ||
307 | |||
308 | dma_ch[channel].regs->curr_desc_ptr = addr; | ||
309 | SSYNC(); | ||
310 | pr_debug("set_dma_curr_desc_addr() : END\n"); | ||
311 | } | ||
312 | EXPORT_SYMBOL(set_dma_curr_desc_addr); | ||
313 | |||
314 | void set_dma_x_count(unsigned int channel, unsigned short x_count) | ||
315 | { | ||
316 | BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE | ||
317 | && channel < MAX_BLACKFIN_DMA_CHANNEL)); | ||
318 | |||
319 | dma_ch[channel].regs->x_count = x_count; | ||
320 | SSYNC(); | ||
321 | } | ||
322 | EXPORT_SYMBOL(set_dma_x_count); | ||
323 | |||
324 | void set_dma_y_count(unsigned int channel, unsigned short y_count) | ||
325 | { | ||
326 | BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE | ||
327 | && channel < MAX_BLACKFIN_DMA_CHANNEL)); | ||
328 | |||
329 | dma_ch[channel].regs->y_count = y_count; | ||
330 | SSYNC(); | ||
331 | } | ||
332 | EXPORT_SYMBOL(set_dma_y_count); | ||
333 | |||
334 | void set_dma_x_modify(unsigned int channel, short x_modify) | ||
335 | { | ||
336 | BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE | ||
337 | && channel < MAX_BLACKFIN_DMA_CHANNEL)); | ||
338 | |||
339 | dma_ch[channel].regs->x_modify = x_modify; | ||
340 | SSYNC(); | ||
341 | } | ||
342 | EXPORT_SYMBOL(set_dma_x_modify); | ||
343 | |||
344 | void set_dma_y_modify(unsigned int channel, short y_modify) | ||
345 | { | ||
346 | BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE | ||
347 | && channel < MAX_BLACKFIN_DMA_CHANNEL)); | ||
348 | |||
349 | dma_ch[channel].regs->y_modify = y_modify; | ||
350 | SSYNC(); | ||
351 | } | ||
352 | EXPORT_SYMBOL(set_dma_y_modify); | ||
353 | |||
354 | void set_dma_config(unsigned int channel, unsigned short config) | ||
355 | { | ||
356 | BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE | ||
357 | && channel < MAX_BLACKFIN_DMA_CHANNEL)); | ||
358 | |||
359 | dma_ch[channel].regs->cfg = config; | ||
360 | SSYNC(); | ||
361 | } | ||
362 | EXPORT_SYMBOL(set_dma_config); | ||
363 | |||
364 | unsigned short | ||
365 | set_bfin_dma_config(char direction, char flow_mode, | ||
366 | char intr_mode, char dma_mode, char width, char syncmode) | ||
367 | { | ||
368 | unsigned short config; | ||
369 | |||
370 | config = | ||
371 | ((direction << 1) | (width << 2) | (dma_mode << 4) | | ||
372 | (intr_mode << 6) | (flow_mode << 12) | (syncmode << 5)); | ||
373 | return config; | ||
374 | } | ||
375 | EXPORT_SYMBOL(set_bfin_dma_config); | ||
376 | |||
377 | void set_dma_sg(unsigned int channel, struct dmasg *sg, int nr_sg) | ||
378 | { | ||
379 | BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE | ||
380 | && channel < MAX_BLACKFIN_DMA_CHANNEL)); | ||
381 | |||
382 | dma_ch[channel].regs->cfg |= ((nr_sg & 0x0F) << 8); | ||
383 | |||
384 | dma_ch[channel].regs->next_desc_ptr = (unsigned int)sg; | ||
385 | |||
386 | SSYNC(); | ||
387 | } | ||
388 | EXPORT_SYMBOL(set_dma_sg); | ||
389 | |||
390 | void set_dma_curr_addr(unsigned int channel, unsigned long addr) | ||
391 | { | ||
392 | BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE | ||
393 | && channel < MAX_BLACKFIN_DMA_CHANNEL)); | ||
394 | |||
395 | dma_ch[channel].regs->curr_addr_ptr = addr; | ||
396 | SSYNC(); | ||
397 | } | ||
398 | EXPORT_SYMBOL(set_dma_curr_addr); | ||
399 | |||
400 | /*------------------------------------------------------------------------------ | ||
401 | * Get the DMA status of a specific DMA channel from the system. | ||
402 | *-----------------------------------------------------------------------------*/ | ||
403 | unsigned short get_dma_curr_irqstat(unsigned int channel) | ||
404 | { | ||
405 | BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE | ||
406 | && channel < MAX_BLACKFIN_DMA_CHANNEL)); | ||
407 | |||
408 | return dma_ch[channel].regs->irq_status; | ||
409 | } | ||
410 | EXPORT_SYMBOL(get_dma_curr_irqstat); | ||
411 | |||
412 | /*------------------------------------------------------------------------------ | ||
413 | * Clear the DMA_DONE bit in DMA status. Stop the DMA completion interrupt. | ||
414 | *-----------------------------------------------------------------------------*/ | ||
415 | void clear_dma_irqstat(unsigned int channel) | ||
416 | { | ||
417 | BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE | ||
418 | && channel < MAX_BLACKFIN_DMA_CHANNEL)); | ||
419 | dma_ch[channel].regs->irq_status |= 3; | ||
420 | } | ||
421 | EXPORT_SYMBOL(clear_dma_irqstat); | ||
422 | |||
423 | /*------------------------------------------------------------------------------ | ||
424 | * Get current DMA xcount of a specific DMA channel from the system. | ||
425 | *-----------------------------------------------------------------------------*/ | ||
426 | unsigned short get_dma_curr_xcount(unsigned int channel) | ||
427 | { | ||
428 | BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE | ||
429 | && channel < MAX_BLACKFIN_DMA_CHANNEL)); | ||
430 | |||
431 | return dma_ch[channel].regs->curr_x_count; | ||
432 | } | ||
433 | EXPORT_SYMBOL(get_dma_curr_xcount); | ||
434 | |||
435 | /*------------------------------------------------------------------------------ | ||
436 | * Get current DMA ycount of a specific DMA channel from the system. | ||
437 | *-----------------------------------------------------------------------------*/ | ||
438 | unsigned short get_dma_curr_ycount(unsigned int channel) | ||
439 | { | ||
440 | BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE | ||
441 | && channel < MAX_BLACKFIN_DMA_CHANNEL)); | ||
442 | |||
443 | return dma_ch[channel].regs->curr_y_count; | ||
444 | } | ||
445 | EXPORT_SYMBOL(get_dma_curr_ycount); | ||
446 | |||
447 | unsigned long get_dma_next_desc_ptr(unsigned int channel) | ||
448 | { | ||
449 | BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE | ||
450 | && channel < MAX_BLACKFIN_DMA_CHANNEL)); | ||
451 | |||
452 | return dma_ch[channel].regs->next_desc_ptr; | ||
453 | } | ||
454 | EXPORT_SYMBOL(get_dma_next_desc_ptr); | ||
455 | |||
456 | unsigned long get_dma_curr_desc_ptr(unsigned int channel) | ||
457 | { | ||
458 | BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE | ||
459 | && channel < MAX_BLACKFIN_DMA_CHANNEL)); | ||
460 | |||
461 | return dma_ch[channel].regs->curr_desc_ptr; | ||
462 | } | ||
463 | EXPORT_SYMBOL(get_dma_curr_desc_ptr); | ||
464 | |||
465 | unsigned long get_dma_curr_addr(unsigned int channel) | ||
466 | { | ||
467 | BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE | ||
468 | && channel < MAX_BLACKFIN_DMA_CHANNEL)); | ||
469 | |||
470 | return dma_ch[channel].regs->curr_addr_ptr; | ||
471 | } | ||
472 | EXPORT_SYMBOL(get_dma_curr_addr); | ||
473 | |||
474 | #ifdef CONFIG_PM | 198 | #ifdef CONFIG_PM |
199 | # ifndef MAX_DMA_SUSPEND_CHANNELS | ||
200 | # define MAX_DMA_SUSPEND_CHANNELS MAX_DMA_CHANNELS | ||
201 | # endif | ||
475 | int blackfin_dma_suspend(void) | 202 | int blackfin_dma_suspend(void) |
476 | { | 203 | { |
477 | int i; | 204 | int i; |
478 | 205 | ||
479 | #ifdef CONFIG_BF561 /* IMDMA channels doesn't have a PERIPHERAL_MAP */ | 206 | for (i = 0; i < MAX_DMA_SUSPEND_CHANNELS; ++i) { |
480 | for (i = 0; i <= CH_MEM_STREAM3_SRC; i++) { | ||
481 | #else | ||
482 | for (i = 0; i < MAX_BLACKFIN_DMA_CHANNEL; i++) { | ||
483 | #endif | ||
484 | if (dma_ch[i].chan_status == DMA_CHANNEL_ENABLED) { | 207 | if (dma_ch[i].chan_status == DMA_CHANNEL_ENABLED) { |
485 | printk(KERN_ERR "DMA Channel %d failed to suspend\n", i); | 208 | printk(KERN_ERR "DMA Channel %d failed to suspend\n", i); |
486 | return -EBUSY; | 209 | return -EBUSY; |
@@ -495,388 +218,201 @@ int blackfin_dma_suspend(void) | |||
495 | void blackfin_dma_resume(void) | 218 | void blackfin_dma_resume(void) |
496 | { | 219 | { |
497 | int i; | 220 | int i; |
498 | 221 | for (i = 0; i < MAX_DMA_SUSPEND_CHANNELS; ++i) | |
499 | #ifdef CONFIG_BF561 /* IMDMA channels doesn't have a PERIPHERAL_MAP */ | ||
500 | for (i = 0; i <= CH_MEM_STREAM3_SRC; i++) | ||
501 | #else | ||
502 | for (i = 0; i < MAX_BLACKFIN_DMA_CHANNEL; i++) | ||
503 | #endif | ||
504 | dma_ch[i].regs->peripheral_map = dma_ch[i].saved_peripheral_map; | 222 | dma_ch[i].regs->peripheral_map = dma_ch[i].saved_peripheral_map; |
505 | } | 223 | } |
506 | #endif | 224 | #endif |
507 | 225 | ||
508 | static void *__dma_memcpy(void *dest, const void *src, size_t size) | 226 | /** |
227 | * blackfin_dma_early_init - minimal DMA init | ||
228 | * | ||
229 | * Setup a few DMA registers so we can safely do DMA transfers early on in | ||
230 | * the kernel booting process. Really this just means using dma_memcpy(). | ||
231 | */ | ||
232 | void __init blackfin_dma_early_init(void) | ||
509 | { | 233 | { |
510 | int direction; /* 1 - address decrease, 0 - address increase */ | ||
511 | int flag_align; /* 1 - address aligned, 0 - address unaligned */ | ||
512 | int flag_2D; /* 1 - 2D DMA needed, 0 - 1D DMA needed */ | ||
513 | unsigned long flags; | ||
514 | |||
515 | if (size <= 0) | ||
516 | return NULL; | ||
517 | |||
518 | local_irq_save(flags); | ||
519 | |||
520 | if ((unsigned long)src < memory_end) | ||
521 | blackfin_dcache_flush_range((unsigned int)src, | ||
522 | (unsigned int)(src + size)); | ||
523 | |||
524 | if ((unsigned long)dest < memory_end) | ||
525 | blackfin_dcache_invalidate_range((unsigned int)dest, | ||
526 | (unsigned int)(dest + size)); | ||
527 | |||
528 | bfin_write_MDMA_D0_IRQ_STATUS(DMA_DONE | DMA_ERR); | ||
529 | |||
530 | if ((unsigned long)src < (unsigned long)dest) | ||
531 | direction = 1; | ||
532 | else | ||
533 | direction = 0; | ||
534 | |||
535 | if ((((unsigned long)dest % 2) == 0) && (((unsigned long)src % 2) == 0) | ||
536 | && ((size % 2) == 0)) | ||
537 | flag_align = 1; | ||
538 | else | ||
539 | flag_align = 0; | ||
540 | |||
541 | if (size > 0x10000) /* size > 64K */ | ||
542 | flag_2D = 1; | ||
543 | else | ||
544 | flag_2D = 0; | ||
545 | |||
546 | /* Setup destination and source start address */ | ||
547 | if (direction) { | ||
548 | if (flag_align) { | ||
549 | bfin_write_MDMA_D0_START_ADDR(dest + size - 2); | ||
550 | bfin_write_MDMA_S0_START_ADDR(src + size - 2); | ||
551 | } else { | ||
552 | bfin_write_MDMA_D0_START_ADDR(dest + size - 1); | ||
553 | bfin_write_MDMA_S0_START_ADDR(src + size - 1); | ||
554 | } | ||
555 | } else { | ||
556 | bfin_write_MDMA_D0_START_ADDR(dest); | ||
557 | bfin_write_MDMA_S0_START_ADDR(src); | ||
558 | } | ||
559 | |||
560 | /* Setup destination and source xcount */ | ||
561 | if (flag_2D) { | ||
562 | if (flag_align) { | ||
563 | bfin_write_MDMA_D0_X_COUNT(1024 / 2); | ||
564 | bfin_write_MDMA_S0_X_COUNT(1024 / 2); | ||
565 | } else { | ||
566 | bfin_write_MDMA_D0_X_COUNT(1024); | ||
567 | bfin_write_MDMA_S0_X_COUNT(1024); | ||
568 | } | ||
569 | bfin_write_MDMA_D0_Y_COUNT(size >> 10); | ||
570 | bfin_write_MDMA_S0_Y_COUNT(size >> 10); | ||
571 | } else { | ||
572 | if (flag_align) { | ||
573 | bfin_write_MDMA_D0_X_COUNT(size / 2); | ||
574 | bfin_write_MDMA_S0_X_COUNT(size / 2); | ||
575 | } else { | ||
576 | bfin_write_MDMA_D0_X_COUNT(size); | ||
577 | bfin_write_MDMA_S0_X_COUNT(size); | ||
578 | } | ||
579 | } | ||
580 | |||
581 | /* Setup destination and source xmodify and ymodify */ | ||
582 | if (direction) { | ||
583 | if (flag_align) { | ||
584 | bfin_write_MDMA_D0_X_MODIFY(-2); | ||
585 | bfin_write_MDMA_S0_X_MODIFY(-2); | ||
586 | if (flag_2D) { | ||
587 | bfin_write_MDMA_D0_Y_MODIFY(-2); | ||
588 | bfin_write_MDMA_S0_Y_MODIFY(-2); | ||
589 | } | ||
590 | } else { | ||
591 | bfin_write_MDMA_D0_X_MODIFY(-1); | ||
592 | bfin_write_MDMA_S0_X_MODIFY(-1); | ||
593 | if (flag_2D) { | ||
594 | bfin_write_MDMA_D0_Y_MODIFY(-1); | ||
595 | bfin_write_MDMA_S0_Y_MODIFY(-1); | ||
596 | } | ||
597 | } | ||
598 | } else { | ||
599 | if (flag_align) { | ||
600 | bfin_write_MDMA_D0_X_MODIFY(2); | ||
601 | bfin_write_MDMA_S0_X_MODIFY(2); | ||
602 | if (flag_2D) { | ||
603 | bfin_write_MDMA_D0_Y_MODIFY(2); | ||
604 | bfin_write_MDMA_S0_Y_MODIFY(2); | ||
605 | } | ||
606 | } else { | ||
607 | bfin_write_MDMA_D0_X_MODIFY(1); | ||
608 | bfin_write_MDMA_S0_X_MODIFY(1); | ||
609 | if (flag_2D) { | ||
610 | bfin_write_MDMA_D0_Y_MODIFY(1); | ||
611 | bfin_write_MDMA_S0_Y_MODIFY(1); | ||
612 | } | ||
613 | } | ||
614 | } | ||
615 | |||
616 | /* Enable source DMA */ | ||
617 | if (flag_2D) { | ||
618 | if (flag_align) { | ||
619 | bfin_write_MDMA_S0_CONFIG(DMAEN | DMA2D | WDSIZE_16); | ||
620 | bfin_write_MDMA_D0_CONFIG(WNR | DI_EN | DMAEN | DMA2D | WDSIZE_16); | ||
621 | } else { | ||
622 | bfin_write_MDMA_S0_CONFIG(DMAEN | DMA2D); | ||
623 | bfin_write_MDMA_D0_CONFIG(WNR | DI_EN | DMAEN | DMA2D); | ||
624 | } | ||
625 | } else { | ||
626 | if (flag_align) { | ||
627 | bfin_write_MDMA_S0_CONFIG(DMAEN | WDSIZE_16); | ||
628 | bfin_write_MDMA_D0_CONFIG(WNR | DI_EN | DMAEN | WDSIZE_16); | ||
629 | } else { | ||
630 | bfin_write_MDMA_S0_CONFIG(DMAEN); | ||
631 | bfin_write_MDMA_D0_CONFIG(WNR | DI_EN | DMAEN); | ||
632 | } | ||
633 | } | ||
634 | |||
635 | SSYNC(); | ||
636 | |||
637 | while (!(bfin_read_MDMA_D0_IRQ_STATUS() & DMA_DONE)) | ||
638 | ; | ||
639 | |||
640 | bfin_write_MDMA_D0_IRQ_STATUS(bfin_read_MDMA_D0_IRQ_STATUS() | | ||
641 | (DMA_DONE | DMA_ERR)); | ||
642 | |||
643 | bfin_write_MDMA_S0_CONFIG(0); | 234 | bfin_write_MDMA_S0_CONFIG(0); |
644 | bfin_write_MDMA_D0_CONFIG(0); | ||
645 | |||
646 | local_irq_restore(flags); | ||
647 | |||
648 | return dest; | ||
649 | } | 235 | } |
650 | 236 | ||
651 | void *dma_memcpy(void *dest, const void *src, size_t size) | 237 | /** |
652 | { | 238 | * __dma_memcpy - program the MDMA registers |
653 | size_t bulk; | 239 | * |
654 | size_t rest; | 240 | * Actually program MDMA0 and wait for the transfer to finish. Disable IRQs |
655 | void * addr; | 241 | * while programming registers so that everything is fully configured. Wait |
656 | 242 | * for DMA to finish with IRQs enabled. If interrupted, the initial DMA_DONE | |
657 | bulk = (size >> 16) << 16; | 243 | * check will make sure we don't clobber any existing transfer. |
658 | rest = size - bulk; | 244 | */ |
659 | if (bulk) | 245 | static void __dma_memcpy(u32 daddr, s16 dmod, u32 saddr, s16 smod, size_t cnt, u32 conf) |
660 | __dma_memcpy(dest, src, bulk); | ||
661 | addr = __dma_memcpy(dest+bulk, src+bulk, rest); | ||
662 | return addr; | ||
663 | } | ||
664 | EXPORT_SYMBOL(dma_memcpy); | ||
665 | |||
666 | void *safe_dma_memcpy(void *dest, const void *src, size_t size) | ||
667 | { | ||
668 | void *addr; | ||
669 | addr = dma_memcpy(dest, src, size); | ||
670 | return addr; | ||
671 | } | ||
672 | EXPORT_SYMBOL(safe_dma_memcpy); | ||
673 | |||
674 | void dma_outsb(unsigned long addr, const void *buf, unsigned short len) | ||
675 | { | 246 | { |
247 | static DEFINE_SPINLOCK(mdma_lock); | ||
676 | unsigned long flags; | 248 | unsigned long flags; |
677 | 249 | ||
678 | local_irq_save(flags); | 250 | spin_lock_irqsave(&mdma_lock, flags); |
679 | 251 | ||
680 | blackfin_dcache_flush_range((unsigned int)buf, | 252 | if (bfin_read_MDMA_S0_CONFIG()) |
681 | (unsigned int)(buf) + len); | 253 | while (!(bfin_read_MDMA_D0_IRQ_STATUS() & DMA_DONE)) |
254 | continue; | ||
255 | |||
256 | if (conf & DMA2D) { | ||
257 | /* For larger bit sizes, we've already divided down cnt so it | ||
258 | * is no longer a multiple of 64k. So we have to break down | ||
259 | * the limit here so it is a multiple of the incoming size. | ||
260 | * There is no limitation here in terms of total size other | ||
261 | * than the hardware though as the bits lost in the shift are | ||
262 | * made up by MODIFY (== we can hit the whole address space). | ||
263 | * X: (2^(16 - 0)) * 1 == (2^(16 - 1)) * 2 == (2^(16 - 2)) * 4 | ||
264 | */ | ||
265 | u32 shift = abs(dmod) >> 1; | ||
266 | size_t ycnt = cnt >> (16 - shift); | ||
267 | cnt = 1 << (16 - shift); | ||
268 | bfin_write_MDMA_D0_Y_COUNT(ycnt); | ||
269 | bfin_write_MDMA_S0_Y_COUNT(ycnt); | ||
270 | bfin_write_MDMA_D0_Y_MODIFY(dmod); | ||
271 | bfin_write_MDMA_S0_Y_MODIFY(smod); | ||
272 | } | ||
682 | 273 | ||
683 | bfin_write_MDMA_D0_START_ADDR(addr); | 274 | bfin_write_MDMA_D0_START_ADDR(daddr); |
684 | bfin_write_MDMA_D0_X_COUNT(len); | 275 | bfin_write_MDMA_D0_X_COUNT(cnt); |
685 | bfin_write_MDMA_D0_X_MODIFY(0); | 276 | bfin_write_MDMA_D0_X_MODIFY(dmod); |
686 | bfin_write_MDMA_D0_IRQ_STATUS(DMA_DONE | DMA_ERR); | 277 | bfin_write_MDMA_D0_IRQ_STATUS(DMA_DONE | DMA_ERR); |
687 | 278 | ||
688 | bfin_write_MDMA_S0_START_ADDR(buf); | 279 | bfin_write_MDMA_S0_START_ADDR(saddr); |
689 | bfin_write_MDMA_S0_X_COUNT(len); | 280 | bfin_write_MDMA_S0_X_COUNT(cnt); |
690 | bfin_write_MDMA_S0_X_MODIFY(1); | 281 | bfin_write_MDMA_S0_X_MODIFY(smod); |
691 | bfin_write_MDMA_S0_IRQ_STATUS(DMA_DONE | DMA_ERR); | 282 | bfin_write_MDMA_S0_IRQ_STATUS(DMA_DONE | DMA_ERR); |
692 | 283 | ||
693 | bfin_write_MDMA_S0_CONFIG(DMAEN | WDSIZE_8); | 284 | bfin_write_MDMA_S0_CONFIG(DMAEN | conf); |
694 | bfin_write_MDMA_D0_CONFIG(WNR | DI_EN | DMAEN | WDSIZE_8); | 285 | bfin_write_MDMA_D0_CONFIG(WNR | DI_EN | DMAEN | conf); |
286 | |||
287 | spin_unlock_irqrestore(&mdma_lock, flags); | ||
695 | 288 | ||
696 | SSYNC(); | 289 | SSYNC(); |
697 | 290 | ||
698 | while (!(bfin_read_MDMA_D0_IRQ_STATUS() & DMA_DONE)); | 291 | while (!(bfin_read_MDMA_D0_IRQ_STATUS() & DMA_DONE)) |
292 | if (bfin_read_MDMA_S0_CONFIG()) | ||
293 | continue; | ||
294 | else | ||
295 | return; | ||
699 | 296 | ||
700 | bfin_write_MDMA_D0_IRQ_STATUS(DMA_DONE | DMA_ERR); | 297 | bfin_write_MDMA_D0_IRQ_STATUS(DMA_DONE | DMA_ERR); |
701 | 298 | ||
702 | bfin_write_MDMA_S0_CONFIG(0); | 299 | bfin_write_MDMA_S0_CONFIG(0); |
703 | bfin_write_MDMA_D0_CONFIG(0); | 300 | bfin_write_MDMA_D0_CONFIG(0); |
704 | local_irq_restore(flags); | ||
705 | |||
706 | } | 301 | } |
707 | EXPORT_SYMBOL(dma_outsb); | ||
708 | |||
709 | 302 | ||
710 | void dma_insb(unsigned long addr, void *buf, unsigned short len) | 303 | /** |
304 | * _dma_memcpy - translate C memcpy settings into MDMA settings | ||
305 | * | ||
306 | * Handle all the high level steps before we touch the MDMA registers. So | ||
307 | * handle direction, tweaking of sizes, and formatting of addresses. | ||
308 | */ | ||
309 | static void *_dma_memcpy(void *pdst, const void *psrc, size_t size) | ||
711 | { | 310 | { |
712 | unsigned long flags; | 311 | u32 conf, shift; |
713 | 312 | s16 mod; | |
714 | blackfin_dcache_invalidate_range((unsigned int)buf, | 313 | unsigned long dst = (unsigned long)pdst; |
715 | (unsigned int)(buf) + len); | 314 | unsigned long src = (unsigned long)psrc; |
716 | |||
717 | local_irq_save(flags); | ||
718 | bfin_write_MDMA_D0_START_ADDR(buf); | ||
719 | bfin_write_MDMA_D0_X_COUNT(len); | ||
720 | bfin_write_MDMA_D0_X_MODIFY(1); | ||
721 | bfin_write_MDMA_D0_IRQ_STATUS(DMA_DONE | DMA_ERR); | ||
722 | |||
723 | bfin_write_MDMA_S0_START_ADDR(addr); | ||
724 | bfin_write_MDMA_S0_X_COUNT(len); | ||
725 | bfin_write_MDMA_S0_X_MODIFY(0); | ||
726 | bfin_write_MDMA_S0_IRQ_STATUS(DMA_DONE | DMA_ERR); | ||
727 | 315 | ||
728 | bfin_write_MDMA_S0_CONFIG(DMAEN | WDSIZE_8); | 316 | if (size == 0) |
729 | bfin_write_MDMA_D0_CONFIG(WNR | DI_EN | DMAEN | WDSIZE_8); | 317 | return NULL; |
730 | 318 | ||
731 | SSYNC(); | 319 | if (dst % 4 == 0 && src % 4 == 0 && size % 4 == 0) { |
320 | conf = WDSIZE_32; | ||
321 | shift = 2; | ||
322 | } else if (dst % 2 == 0 && src % 2 == 0 && size % 2 == 0) { | ||
323 | conf = WDSIZE_16; | ||
324 | shift = 1; | ||
325 | } else { | ||
326 | conf = WDSIZE_8; | ||
327 | shift = 0; | ||
328 | } | ||
732 | 329 | ||
733 | while (!(bfin_read_MDMA_D0_IRQ_STATUS() & DMA_DONE)); | 330 | /* If the two memory regions have a chance of overlapping, make |
331 | * sure the memcpy still works as expected. Do this by having the | ||
332 | * copy run backwards instead. | ||
333 | */ | ||
334 | mod = 1 << shift; | ||
335 | if (src < dst) { | ||
336 | mod *= -1; | ||
337 | dst += size + mod; | ||
338 | src += size + mod; | ||
339 | } | ||
340 | size >>= shift; | ||
734 | 341 | ||
735 | bfin_write_MDMA_D0_IRQ_STATUS(DMA_DONE | DMA_ERR); | 342 | if (size > 0x10000) |
343 | conf |= DMA2D; | ||
736 | 344 | ||
737 | bfin_write_MDMA_S0_CONFIG(0); | 345 | __dma_memcpy(dst, mod, src, mod, size, conf); |
738 | bfin_write_MDMA_D0_CONFIG(0); | ||
739 | local_irq_restore(flags); | ||
740 | 346 | ||
347 | return pdst; | ||
741 | } | 348 | } |
742 | EXPORT_SYMBOL(dma_insb); | ||
743 | 349 | ||
744 | void dma_outsw(unsigned long addr, const void *buf, unsigned short len) | 350 | /** |
351 | * dma_memcpy - DMA memcpy under mutex lock | ||
352 | * | ||
353 | * Do not check arguments before starting the DMA memcpy. Break the transfer | ||
354 | * up into two pieces. The first transfer is in multiples of 64k and the | ||
355 | * second transfer is the piece smaller than 64k. | ||
356 | */ | ||
357 | void *dma_memcpy(void *pdst, const void *psrc, size_t size) | ||
745 | { | 358 | { |
746 | unsigned long flags; | 359 | unsigned long dst = (unsigned long)pdst; |
747 | 360 | unsigned long src = (unsigned long)psrc; | |
748 | local_irq_save(flags); | 361 | size_t bulk, rest; |
749 | 362 | ||
750 | blackfin_dcache_flush_range((unsigned int)buf, | 363 | if (bfin_addr_dcachable(src)) |
751 | (unsigned int)(buf) + len * sizeof(short)); | 364 | blackfin_dcache_flush_range(src, src + size); |
752 | 365 | ||
753 | bfin_write_MDMA_D0_START_ADDR(addr); | 366 | if (bfin_addr_dcachable(dst)) |
754 | bfin_write_MDMA_D0_X_COUNT(len); | 367 | blackfin_dcache_invalidate_range(dst, dst + size); |
755 | bfin_write_MDMA_D0_X_MODIFY(0); | ||
756 | bfin_write_MDMA_D0_IRQ_STATUS(DMA_DONE | DMA_ERR); | ||
757 | |||
758 | bfin_write_MDMA_S0_START_ADDR(buf); | ||
759 | bfin_write_MDMA_S0_X_COUNT(len); | ||
760 | bfin_write_MDMA_S0_X_MODIFY(2); | ||
761 | bfin_write_MDMA_S0_IRQ_STATUS(DMA_DONE | DMA_ERR); | ||
762 | |||
763 | bfin_write_MDMA_S0_CONFIG(DMAEN | WDSIZE_16); | ||
764 | bfin_write_MDMA_D0_CONFIG(WNR | DI_EN | DMAEN | WDSIZE_16); | ||
765 | |||
766 | SSYNC(); | ||
767 | |||
768 | while (!(bfin_read_MDMA_D0_IRQ_STATUS() & DMA_DONE)); | ||
769 | |||
770 | bfin_write_MDMA_D0_IRQ_STATUS(DMA_DONE | DMA_ERR); | ||
771 | |||
772 | bfin_write_MDMA_S0_CONFIG(0); | ||
773 | bfin_write_MDMA_D0_CONFIG(0); | ||
774 | local_irq_restore(flags); | ||
775 | 368 | ||
369 | bulk = size & ~0xffff; | ||
370 | rest = size - bulk; | ||
371 | if (bulk) | ||
372 | _dma_memcpy(pdst, psrc, bulk); | ||
373 | _dma_memcpy(pdst + bulk, psrc + bulk, rest); | ||
374 | return pdst; | ||
776 | } | 375 | } |
777 | EXPORT_SYMBOL(dma_outsw); | 376 | EXPORT_SYMBOL(dma_memcpy); |
778 | 377 | ||
779 | void dma_insw(unsigned long addr, void *buf, unsigned short len) | 378 | /** |
379 | * safe_dma_memcpy - DMA memcpy w/argument checking | ||
380 | * | ||
381 | * Verify arguments are safe before heading to dma_memcpy(). | ||
382 | */ | ||
383 | void *safe_dma_memcpy(void *dst, const void *src, size_t size) | ||
780 | { | 384 | { |
781 | unsigned long flags; | 385 | if (!access_ok(VERIFY_WRITE, dst, size)) |
782 | 386 | return NULL; | |
783 | blackfin_dcache_invalidate_range((unsigned int)buf, | 387 | if (!access_ok(VERIFY_READ, src, size)) |
784 | (unsigned int)(buf) + len * sizeof(short)); | 388 | return NULL; |
785 | 389 | return dma_memcpy(dst, src, size); | |
786 | local_irq_save(flags); | ||
787 | |||
788 | bfin_write_MDMA_D0_START_ADDR(buf); | ||
789 | bfin_write_MDMA_D0_X_COUNT(len); | ||
790 | bfin_write_MDMA_D0_X_MODIFY(2); | ||
791 | bfin_write_MDMA_D0_IRQ_STATUS(DMA_DONE | DMA_ERR); | ||
792 | |||
793 | bfin_write_MDMA_S0_START_ADDR(addr); | ||
794 | bfin_write_MDMA_S0_X_COUNT(len); | ||
795 | bfin_write_MDMA_S0_X_MODIFY(0); | ||
796 | bfin_write_MDMA_S0_IRQ_STATUS(DMA_DONE | DMA_ERR); | ||
797 | |||
798 | bfin_write_MDMA_S0_CONFIG(DMAEN | WDSIZE_16); | ||
799 | bfin_write_MDMA_D0_CONFIG(WNR | DI_EN | DMAEN | WDSIZE_16); | ||
800 | |||
801 | SSYNC(); | ||
802 | |||
803 | while (!(bfin_read_MDMA_D0_IRQ_STATUS() & DMA_DONE)); | ||
804 | |||
805 | bfin_write_MDMA_D0_IRQ_STATUS(DMA_DONE | DMA_ERR); | ||
806 | |||
807 | bfin_write_MDMA_S0_CONFIG(0); | ||
808 | bfin_write_MDMA_D0_CONFIG(0); | ||
809 | local_irq_restore(flags); | ||
810 | |||
811 | } | 390 | } |
812 | EXPORT_SYMBOL(dma_insw); | 391 | EXPORT_SYMBOL(safe_dma_memcpy); |
813 | 392 | ||
814 | void dma_outsl(unsigned long addr, const void *buf, unsigned short len) | 393 | static void _dma_out(unsigned long addr, unsigned long buf, unsigned short len, |
394 | u16 size, u16 dma_size) | ||
815 | { | 395 | { |
816 | unsigned long flags; | 396 | blackfin_dcache_flush_range(buf, buf + len * size); |
817 | 397 | __dma_memcpy(addr, 0, buf, size, len, dma_size); | |
818 | local_irq_save(flags); | ||
819 | |||
820 | blackfin_dcache_flush_range((unsigned int)buf, | ||
821 | (unsigned int)(buf) + len * sizeof(long)); | ||
822 | |||
823 | bfin_write_MDMA_D0_START_ADDR(addr); | ||
824 | bfin_write_MDMA_D0_X_COUNT(len); | ||
825 | bfin_write_MDMA_D0_X_MODIFY(0); | ||
826 | bfin_write_MDMA_D0_IRQ_STATUS(DMA_DONE | DMA_ERR); | ||
827 | |||
828 | bfin_write_MDMA_S0_START_ADDR(buf); | ||
829 | bfin_write_MDMA_S0_X_COUNT(len); | ||
830 | bfin_write_MDMA_S0_X_MODIFY(4); | ||
831 | bfin_write_MDMA_S0_IRQ_STATUS(DMA_DONE | DMA_ERR); | ||
832 | |||
833 | bfin_write_MDMA_S0_CONFIG(DMAEN | WDSIZE_32); | ||
834 | bfin_write_MDMA_D0_CONFIG(WNR | DI_EN | DMAEN | WDSIZE_32); | ||
835 | |||
836 | SSYNC(); | ||
837 | |||
838 | while (!(bfin_read_MDMA_D0_IRQ_STATUS() & DMA_DONE)); | ||
839 | |||
840 | bfin_write_MDMA_D0_IRQ_STATUS(DMA_DONE | DMA_ERR); | ||
841 | |||
842 | bfin_write_MDMA_S0_CONFIG(0); | ||
843 | bfin_write_MDMA_D0_CONFIG(0); | ||
844 | local_irq_restore(flags); | ||
845 | |||
846 | } | 398 | } |
847 | EXPORT_SYMBOL(dma_outsl); | ||
848 | 399 | ||
849 | void dma_insl(unsigned long addr, void *buf, unsigned short len) | 400 | static void _dma_in(unsigned long addr, unsigned long buf, unsigned short len, |
401 | u16 size, u16 dma_size) | ||
850 | { | 402 | { |
851 | unsigned long flags; | 403 | blackfin_dcache_invalidate_range(buf, buf + len * size); |
852 | 404 | __dma_memcpy(buf, size, addr, 0, len, dma_size); | |
853 | blackfin_dcache_invalidate_range((unsigned int)buf, | ||
854 | (unsigned int)(buf) + len * sizeof(long)); | ||
855 | |||
856 | local_irq_save(flags); | ||
857 | |||
858 | bfin_write_MDMA_D0_START_ADDR(buf); | ||
859 | bfin_write_MDMA_D0_X_COUNT(len); | ||
860 | bfin_write_MDMA_D0_X_MODIFY(4); | ||
861 | bfin_write_MDMA_D0_IRQ_STATUS(DMA_DONE | DMA_ERR); | ||
862 | |||
863 | bfin_write_MDMA_S0_START_ADDR(addr); | ||
864 | bfin_write_MDMA_S0_X_COUNT(len); | ||
865 | bfin_write_MDMA_S0_X_MODIFY(0); | ||
866 | bfin_write_MDMA_S0_IRQ_STATUS(DMA_DONE | DMA_ERR); | ||
867 | |||
868 | bfin_write_MDMA_S0_CONFIG(DMAEN | WDSIZE_32); | ||
869 | bfin_write_MDMA_D0_CONFIG(WNR | DI_EN | DMAEN | WDSIZE_32); | ||
870 | |||
871 | SSYNC(); | ||
872 | |||
873 | while (!(bfin_read_MDMA_D0_IRQ_STATUS() & DMA_DONE)); | ||
874 | |||
875 | bfin_write_MDMA_D0_IRQ_STATUS(DMA_DONE | DMA_ERR); | ||
876 | |||
877 | bfin_write_MDMA_S0_CONFIG(0); | ||
878 | bfin_write_MDMA_D0_CONFIG(0); | ||
879 | local_irq_restore(flags); | ||
880 | |||
881 | } | 405 | } |
882 | EXPORT_SYMBOL(dma_insl); | 406 | |
407 | #define MAKE_DMA_IO(io, bwl, isize, dmasize, cnst) \ | ||
408 | void dma_##io##s##bwl(unsigned long addr, cnst void *buf, unsigned short len) \ | ||
409 | { \ | ||
410 | _dma_##io(addr, (unsigned long)buf, len, isize, WDSIZE_##dmasize); \ | ||
411 | } \ | ||
412 | EXPORT_SYMBOL(dma_##io##s##bwl) | ||
413 | MAKE_DMA_IO(out, b, 1, 8, const); | ||
414 | MAKE_DMA_IO(in, b, 1, 8, ); | ||
415 | MAKE_DMA_IO(out, w, 2, 16, const); | ||
416 | MAKE_DMA_IO(in, w, 2, 16, ); | ||
417 | MAKE_DMA_IO(out, l, 4, 32, const); | ||
418 | MAKE_DMA_IO(in, l, 4, 32, ); | ||
diff --git a/arch/blackfin/kernel/bfin_gpio.c b/arch/blackfin/kernel/bfin_gpio.c index 5c0800adb4dd..4c14331978f6 100644 --- a/arch/blackfin/kernel/bfin_gpio.c +++ b/arch/blackfin/kernel/bfin_gpio.c | |||
@@ -119,28 +119,28 @@ enum { | |||
119 | #define AWA_DUMMY_READ(...) do { } while (0) | 119 | #define AWA_DUMMY_READ(...) do { } while (0) |
120 | #endif | 120 | #endif |
121 | 121 | ||
122 | #ifdef BF533_FAMILY | 122 | #if defined(BF533_FAMILY) || defined(BF538_FAMILY) |
123 | static struct gpio_port_t *gpio_bankb[gpio_bank(MAX_BLACKFIN_GPIOS)] = { | 123 | static struct gpio_port_t *gpio_bankb[] = { |
124 | (struct gpio_port_t *) FIO_FLAG_D, | 124 | (struct gpio_port_t *) FIO_FLAG_D, |
125 | }; | 125 | }; |
126 | #endif | 126 | #endif |
127 | 127 | ||
128 | #if defined(BF527_FAMILY) || defined(BF537_FAMILY) | 128 | #if defined(BF527_FAMILY) || defined(BF537_FAMILY) || defined(BF518_FAMILY) |
129 | static struct gpio_port_t *gpio_bankb[gpio_bank(MAX_BLACKFIN_GPIOS)] = { | 129 | static struct gpio_port_t *gpio_bankb[] = { |
130 | (struct gpio_port_t *) PORTFIO, | 130 | (struct gpio_port_t *) PORTFIO, |
131 | (struct gpio_port_t *) PORTGIO, | 131 | (struct gpio_port_t *) PORTGIO, |
132 | (struct gpio_port_t *) PORTHIO, | 132 | (struct gpio_port_t *) PORTHIO, |
133 | }; | 133 | }; |
134 | 134 | ||
135 | static unsigned short *port_fer[gpio_bank(MAX_BLACKFIN_GPIOS)] = { | 135 | static unsigned short *port_fer[] = { |
136 | (unsigned short *) PORTF_FER, | 136 | (unsigned short *) PORTF_FER, |
137 | (unsigned short *) PORTG_FER, | 137 | (unsigned short *) PORTG_FER, |
138 | (unsigned short *) PORTH_FER, | 138 | (unsigned short *) PORTH_FER, |
139 | }; | 139 | }; |
140 | #endif | 140 | #endif |
141 | 141 | ||
142 | #ifdef BF527_FAMILY | 142 | #if defined(BF527_FAMILY) || defined(BF518_FAMILY) |
143 | static unsigned short *port_mux[gpio_bank(MAX_BLACKFIN_GPIOS)] = { | 143 | static unsigned short *port_mux[] = { |
144 | (unsigned short *) PORTF_MUX, | 144 | (unsigned short *) PORTF_MUX, |
145 | (unsigned short *) PORTG_MUX, | 145 | (unsigned short *) PORTG_MUX, |
146 | (unsigned short *) PORTH_MUX, | 146 | (unsigned short *) PORTH_MUX, |
@@ -155,7 +155,7 @@ u8 pmux_offset[][16] = | |||
155 | #endif | 155 | #endif |
156 | 156 | ||
157 | #ifdef BF561_FAMILY | 157 | #ifdef BF561_FAMILY |
158 | static struct gpio_port_t *gpio_bankb[gpio_bank(MAX_BLACKFIN_GPIOS)] = { | 158 | static struct gpio_port_t *gpio_bankb[] = { |
159 | (struct gpio_port_t *) FIO0_FLAG_D, | 159 | (struct gpio_port_t *) FIO0_FLAG_D, |
160 | (struct gpio_port_t *) FIO1_FLAG_D, | 160 | (struct gpio_port_t *) FIO1_FLAG_D, |
161 | (struct gpio_port_t *) FIO2_FLAG_D, | 161 | (struct gpio_port_t *) FIO2_FLAG_D, |
@@ -163,7 +163,7 @@ static struct gpio_port_t *gpio_bankb[gpio_bank(MAX_BLACKFIN_GPIOS)] = { | |||
163 | #endif | 163 | #endif |
164 | 164 | ||
165 | #ifdef BF548_FAMILY | 165 | #ifdef BF548_FAMILY |
166 | static struct gpio_port_t *gpio_array[gpio_bank(MAX_BLACKFIN_GPIOS)] = { | 166 | static struct gpio_port_t *gpio_array[] = { |
167 | (struct gpio_port_t *)PORTA_FER, | 167 | (struct gpio_port_t *)PORTA_FER, |
168 | (struct gpio_port_t *)PORTB_FER, | 168 | (struct gpio_port_t *)PORTB_FER, |
169 | (struct gpio_port_t *)PORTC_FER, | 169 | (struct gpio_port_t *)PORTC_FER, |
@@ -177,8 +177,9 @@ static struct gpio_port_t *gpio_array[gpio_bank(MAX_BLACKFIN_GPIOS)] = { | |||
177 | }; | 177 | }; |
178 | #endif | 178 | #endif |
179 | 179 | ||
180 | static unsigned short reserved_gpio_map[gpio_bank(MAX_BLACKFIN_GPIOS)]; | 180 | static unsigned short reserved_gpio_map[GPIO_BANK_NUM]; |
181 | static unsigned short reserved_peri_map[gpio_bank(MAX_RESOURCES)]; | 181 | static unsigned short reserved_peri_map[gpio_bank(MAX_RESOURCES)]; |
182 | static unsigned short reserved_gpio_irq_map[GPIO_BANK_NUM]; | ||
182 | 183 | ||
183 | #define RESOURCE_LABEL_SIZE 16 | 184 | #define RESOURCE_LABEL_SIZE 16 |
184 | 185 | ||
@@ -188,48 +189,46 @@ static struct str_ident { | |||
188 | 189 | ||
189 | #if defined(CONFIG_PM) | 190 | #if defined(CONFIG_PM) |
190 | #if defined(CONFIG_BF54x) | 191 | #if defined(CONFIG_BF54x) |
191 | static struct gpio_port_s gpio_bank_saved[gpio_bank(MAX_BLACKFIN_GPIOS)]; | 192 | static struct gpio_port_s gpio_bank_saved[GPIO_BANK_NUM]; |
192 | #else | 193 | #else |
193 | static unsigned short wakeup_map[gpio_bank(MAX_BLACKFIN_GPIOS)]; | 194 | static unsigned short wakeup_map[GPIO_BANK_NUM]; |
194 | static unsigned char wakeup_flags_map[MAX_BLACKFIN_GPIOS]; | 195 | static unsigned char wakeup_flags_map[MAX_BLACKFIN_GPIOS]; |
195 | static struct gpio_port_s gpio_bank_saved[gpio_bank(MAX_BLACKFIN_GPIOS)]; | 196 | static struct gpio_port_s gpio_bank_saved[GPIO_BANK_NUM]; |
196 | 197 | ||
197 | #ifdef BF533_FAMILY | 198 | #ifdef BF533_FAMILY |
198 | static unsigned int sic_iwr_irqs[gpio_bank(MAX_BLACKFIN_GPIOS)] = {IRQ_PROG_INTB}; | 199 | static unsigned int sic_iwr_irqs[] = {IRQ_PROG_INTB}; |
199 | #endif | 200 | #endif |
200 | 201 | ||
201 | #ifdef BF537_FAMILY | 202 | #ifdef BF537_FAMILY |
202 | static unsigned int sic_iwr_irqs[gpio_bank(MAX_BLACKFIN_GPIOS)] = {IRQ_PROG_INTB, IRQ_PORTG_INTB, IRQ_MAC_TX}; | 203 | static unsigned int sic_iwr_irqs[] = {IRQ_PROG_INTB, IRQ_PORTG_INTB, IRQ_MAC_TX}; |
204 | #endif | ||
205 | |||
206 | #ifdef BF538_FAMILY | ||
207 | static unsigned int sic_iwr_irqs[] = {IRQ_PORTF_INTB}; | ||
203 | #endif | 208 | #endif |
204 | 209 | ||
205 | #ifdef BF527_FAMILY | 210 | #if defined(BF527_FAMILY) || defined(BF518_FAMILY) |
206 | static unsigned int sic_iwr_irqs[gpio_bank(MAX_BLACKFIN_GPIOS)] = {IRQ_PORTF_INTB, IRQ_PORTG_INTB, IRQ_PORTH_INTB}; | 211 | static unsigned int sic_iwr_irqs[] = {IRQ_PORTF_INTB, IRQ_PORTG_INTB, IRQ_PORTH_INTB}; |
207 | #endif | 212 | #endif |
208 | 213 | ||
209 | #ifdef BF561_FAMILY | 214 | #ifdef BF561_FAMILY |
210 | static unsigned int sic_iwr_irqs[gpio_bank(MAX_BLACKFIN_GPIOS)] = {IRQ_PROG0_INTB, IRQ_PROG1_INTB, IRQ_PROG2_INTB}; | 215 | static unsigned int sic_iwr_irqs[] = {IRQ_PROG0_INTB, IRQ_PROG1_INTB, IRQ_PROG2_INTB}; |
211 | #endif | 216 | #endif |
212 | #endif | 217 | #endif |
213 | #endif /* CONFIG_PM */ | 218 | #endif /* CONFIG_PM */ |
214 | 219 | ||
215 | #if defined(BF548_FAMILY) | ||
216 | inline int check_gpio(unsigned gpio) | 220 | inline int check_gpio(unsigned gpio) |
217 | { | 221 | { |
222 | #if defined(BF548_FAMILY) | ||
218 | if (gpio == GPIO_PB15 || gpio == GPIO_PC14 || gpio == GPIO_PC15 | 223 | if (gpio == GPIO_PB15 || gpio == GPIO_PC14 || gpio == GPIO_PC15 |
219 | || gpio == GPIO_PH14 || gpio == GPIO_PH15 | 224 | || gpio == GPIO_PH14 || gpio == GPIO_PH15 |
220 | || gpio == GPIO_PJ14 || gpio == GPIO_PJ15 | 225 | || gpio == GPIO_PJ14 || gpio == GPIO_PJ15) |
221 | || gpio >= MAX_BLACKFIN_GPIOS) | ||
222 | return -EINVAL; | 226 | return -EINVAL; |
223 | return 0; | 227 | #endif |
224 | } | ||
225 | #else | ||
226 | inline int check_gpio(unsigned gpio) | ||
227 | { | ||
228 | if (gpio >= MAX_BLACKFIN_GPIOS) | 228 | if (gpio >= MAX_BLACKFIN_GPIOS) |
229 | return -EINVAL; | 229 | return -EINVAL; |
230 | return 0; | 230 | return 0; |
231 | } | 231 | } |
232 | #endif | ||
233 | 232 | ||
234 | static void gpio_error(unsigned gpio) | 233 | static void gpio_error(unsigned gpio) |
235 | { | 234 | { |
@@ -258,35 +257,30 @@ static int cmp_label(unsigned short ident, const char *label) | |||
258 | } | 257 | } |
259 | 258 | ||
260 | if (label) | 259 | if (label) |
261 | return strncmp(str_ident[ident].name, | 260 | return strcmp(str_ident[ident].name, label); |
262 | label, strlen(label)); | ||
263 | else | 261 | else |
264 | return -EINVAL; | 262 | return -EINVAL; |
265 | } | 263 | } |
266 | 264 | ||
267 | #if defined(BF527_FAMILY) || defined(BF537_FAMILY) | ||
268 | static void port_setup(unsigned gpio, unsigned short usage) | 265 | static void port_setup(unsigned gpio, unsigned short usage) |
269 | { | 266 | { |
270 | if (!check_gpio(gpio)) { | 267 | if (check_gpio(gpio)) |
271 | if (usage == GPIO_USAGE) | 268 | return; |
272 | *port_fer[gpio_bank(gpio)] &= ~gpio_bit(gpio); | 269 | |
273 | else | 270 | #if defined(BF527_FAMILY) || defined(BF537_FAMILY) || defined(BF518_FAMILY) |
274 | *port_fer[gpio_bank(gpio)] |= gpio_bit(gpio); | 271 | if (usage == GPIO_USAGE) |
275 | SSYNC(); | 272 | *port_fer[gpio_bank(gpio)] &= ~gpio_bit(gpio); |
276 | } | 273 | else |
277 | } | 274 | *port_fer[gpio_bank(gpio)] |= gpio_bit(gpio); |
275 | SSYNC(); | ||
278 | #elif defined(BF548_FAMILY) | 276 | #elif defined(BF548_FAMILY) |
279 | static void port_setup(unsigned gpio, unsigned short usage) | ||
280 | { | ||
281 | if (usage == GPIO_USAGE) | 277 | if (usage == GPIO_USAGE) |
282 | gpio_array[gpio_bank(gpio)]->port_fer &= ~gpio_bit(gpio); | 278 | gpio_array[gpio_bank(gpio)]->port_fer &= ~gpio_bit(gpio); |
283 | else | 279 | else |
284 | gpio_array[gpio_bank(gpio)]->port_fer |= gpio_bit(gpio); | 280 | gpio_array[gpio_bank(gpio)]->port_fer |= gpio_bit(gpio); |
285 | SSYNC(); | 281 | SSYNC(); |
286 | } | ||
287 | #else | ||
288 | # define port_setup(...) do { } while (0) | ||
289 | #endif | 282 | #endif |
283 | } | ||
290 | 284 | ||
291 | #ifdef BF537_FAMILY | 285 | #ifdef BF537_FAMILY |
292 | static struct { | 286 | static struct { |
@@ -379,7 +373,7 @@ inline u16 get_portmux(unsigned short portno) | |||
379 | 373 | ||
380 | return (pmux >> (2 * gpio_sub_n(portno)) & 0x3); | 374 | return (pmux >> (2 * gpio_sub_n(portno)) & 0x3); |
381 | } | 375 | } |
382 | #elif defined(BF527_FAMILY) | 376 | #elif defined(BF527_FAMILY) || defined(BF518_FAMILY) |
383 | inline void portmux_setup(unsigned short portno, unsigned short function) | 377 | inline void portmux_setup(unsigned short portno, unsigned short function) |
384 | { | 378 | { |
385 | u16 pmux, ident = P_IDENT(portno); | 379 | u16 pmux, ident = P_IDENT(portno); |
@@ -428,13 +422,13 @@ arch_initcall(bfin_gpio_init); | |||
428 | void set_gpio_ ## name(unsigned gpio, unsigned short arg) \ | 422 | void set_gpio_ ## name(unsigned gpio, unsigned short arg) \ |
429 | { \ | 423 | { \ |
430 | unsigned long flags; \ | 424 | unsigned long flags; \ |
431 | local_irq_save(flags); \ | 425 | local_irq_save_hw(flags); \ |
432 | if (arg) \ | 426 | if (arg) \ |
433 | gpio_bankb[gpio_bank(gpio)]->name |= gpio_bit(gpio); \ | 427 | gpio_bankb[gpio_bank(gpio)]->name |= gpio_bit(gpio); \ |
434 | else \ | 428 | else \ |
435 | gpio_bankb[gpio_bank(gpio)]->name &= ~gpio_bit(gpio); \ | 429 | gpio_bankb[gpio_bank(gpio)]->name &= ~gpio_bit(gpio); \ |
436 | AWA_DUMMY_READ(name); \ | 430 | AWA_DUMMY_READ(name); \ |
437 | local_irq_restore(flags); \ | 431 | local_irq_restore_hw(flags); \ |
438 | } \ | 432 | } \ |
439 | EXPORT_SYMBOL(set_gpio_ ## name); | 433 | EXPORT_SYMBOL(set_gpio_ ## name); |
440 | 434 | ||
@@ -450,13 +444,13 @@ SET_GPIO(both) | |||
450 | void set_gpio_ ## name(unsigned gpio, unsigned short arg) \ | 444 | void set_gpio_ ## name(unsigned gpio, unsigned short arg) \ |
451 | { \ | 445 | { \ |
452 | unsigned long flags; \ | 446 | unsigned long flags; \ |
453 | local_irq_save(flags); \ | 447 | local_irq_save_hw(flags); \ |
454 | if (arg) \ | 448 | if (arg) \ |
455 | gpio_bankb[gpio_bank(gpio)]->name ## _set = gpio_bit(gpio); \ | 449 | gpio_bankb[gpio_bank(gpio)]->name ## _set = gpio_bit(gpio); \ |
456 | else \ | 450 | else \ |
457 | gpio_bankb[gpio_bank(gpio)]->name ## _clear = gpio_bit(gpio); \ | 451 | gpio_bankb[gpio_bank(gpio)]->name ## _clear = gpio_bit(gpio); \ |
458 | AWA_DUMMY_READ(name); \ | 452 | AWA_DUMMY_READ(name); \ |
459 | local_irq_restore(flags); \ | 453 | local_irq_restore_hw(flags); \ |
460 | } \ | 454 | } \ |
461 | EXPORT_SYMBOL(set_gpio_ ## name); | 455 | EXPORT_SYMBOL(set_gpio_ ## name); |
462 | #else | 456 | #else |
@@ -479,10 +473,10 @@ SET_GPIO_SC(data) | |||
479 | void set_gpio_toggle(unsigned gpio) | 473 | void set_gpio_toggle(unsigned gpio) |
480 | { | 474 | { |
481 | unsigned long flags; | 475 | unsigned long flags; |
482 | local_irq_save(flags); | 476 | local_irq_save_hw(flags); |
483 | gpio_bankb[gpio_bank(gpio)]->toggle = gpio_bit(gpio); | 477 | gpio_bankb[gpio_bank(gpio)]->toggle = gpio_bit(gpio); |
484 | AWA_DUMMY_READ(toggle); | 478 | AWA_DUMMY_READ(toggle); |
485 | local_irq_restore(flags); | 479 | local_irq_restore_hw(flags); |
486 | } | 480 | } |
487 | #else | 481 | #else |
488 | void set_gpio_toggle(unsigned gpio) | 482 | void set_gpio_toggle(unsigned gpio) |
@@ -500,10 +494,10 @@ EXPORT_SYMBOL(set_gpio_toggle); | |||
500 | void set_gpiop_ ## name(unsigned gpio, unsigned short arg) \ | 494 | void set_gpiop_ ## name(unsigned gpio, unsigned short arg) \ |
501 | { \ | 495 | { \ |
502 | unsigned long flags; \ | 496 | unsigned long flags; \ |
503 | local_irq_save(flags); \ | 497 | local_irq_save_hw(flags); \ |
504 | gpio_bankb[gpio_bank(gpio)]->name = arg; \ | 498 | gpio_bankb[gpio_bank(gpio)]->name = arg; \ |
505 | AWA_DUMMY_READ(name); \ | 499 | AWA_DUMMY_READ(name); \ |
506 | local_irq_restore(flags); \ | 500 | local_irq_restore_hw(flags); \ |
507 | } \ | 501 | } \ |
508 | EXPORT_SYMBOL(set_gpiop_ ## name); | 502 | EXPORT_SYMBOL(set_gpiop_ ## name); |
509 | #else | 503 | #else |
@@ -531,10 +525,10 @@ unsigned short get_gpio_ ## name(unsigned gpio) \ | |||
531 | { \ | 525 | { \ |
532 | unsigned long flags; \ | 526 | unsigned long flags; \ |
533 | unsigned short ret; \ | 527 | unsigned short ret; \ |
534 | local_irq_save(flags); \ | 528 | local_irq_save_hw(flags); \ |
535 | ret = 0x01 & (gpio_bankb[gpio_bank(gpio)]->name >> gpio_sub_n(gpio)); \ | 529 | ret = 0x01 & (gpio_bankb[gpio_bank(gpio)]->name >> gpio_sub_n(gpio)); \ |
536 | AWA_DUMMY_READ(name); \ | 530 | AWA_DUMMY_READ(name); \ |
537 | local_irq_restore(flags); \ | 531 | local_irq_restore_hw(flags); \ |
538 | return ret; \ | 532 | return ret; \ |
539 | } \ | 533 | } \ |
540 | EXPORT_SYMBOL(get_gpio_ ## name); | 534 | EXPORT_SYMBOL(get_gpio_ ## name); |
@@ -564,10 +558,10 @@ unsigned short get_gpiop_ ## name(unsigned gpio) \ | |||
564 | { \ | 558 | { \ |
565 | unsigned long flags; \ | 559 | unsigned long flags; \ |
566 | unsigned short ret; \ | 560 | unsigned short ret; \ |
567 | local_irq_save(flags); \ | 561 | local_irq_save_hw(flags); \ |
568 | ret = (gpio_bankb[gpio_bank(gpio)]->name); \ | 562 | ret = (gpio_bankb[gpio_bank(gpio)]->name); \ |
569 | AWA_DUMMY_READ(name); \ | 563 | AWA_DUMMY_READ(name); \ |
570 | local_irq_restore(flags); \ | 564 | local_irq_restore_hw(flags); \ |
571 | return ret; \ | 565 | return ret; \ |
572 | } \ | 566 | } \ |
573 | EXPORT_SYMBOL(get_gpiop_ ## name); | 567 | EXPORT_SYMBOL(get_gpiop_ ## name); |
@@ -617,10 +611,10 @@ int gpio_pm_wakeup_request(unsigned gpio, unsigned char type) | |||
617 | if ((check_gpio(gpio) < 0) || !type) | 611 | if ((check_gpio(gpio) < 0) || !type) |
618 | return -EINVAL; | 612 | return -EINVAL; |
619 | 613 | ||
620 | local_irq_save(flags); | 614 | local_irq_save_hw(flags); |
621 | wakeup_map[gpio_bank(gpio)] |= gpio_bit(gpio); | 615 | wakeup_map[gpio_bank(gpio)] |= gpio_bit(gpio); |
622 | wakeup_flags_map[gpio] = type; | 616 | wakeup_flags_map[gpio] = type; |
623 | local_irq_restore(flags); | 617 | local_irq_restore_hw(flags); |
624 | 618 | ||
625 | return 0; | 619 | return 0; |
626 | } | 620 | } |
@@ -633,11 +627,11 @@ void gpio_pm_wakeup_free(unsigned gpio) | |||
633 | if (check_gpio(gpio) < 0) | 627 | if (check_gpio(gpio) < 0) |
634 | return; | 628 | return; |
635 | 629 | ||
636 | local_irq_save(flags); | 630 | local_irq_save_hw(flags); |
637 | 631 | ||
638 | wakeup_map[gpio_bank(gpio)] &= ~gpio_bit(gpio); | 632 | wakeup_map[gpio_bank(gpio)] &= ~gpio_bit(gpio); |
639 | 633 | ||
640 | local_irq_restore(flags); | 634 | local_irq_restore_hw(flags); |
641 | } | 635 | } |
642 | EXPORT_SYMBOL(gpio_pm_wakeup_free); | 636 | EXPORT_SYMBOL(gpio_pm_wakeup_free); |
643 | 637 | ||
@@ -679,7 +673,7 @@ u32 bfin_pm_standby_setup(void) | |||
679 | gpio_bankb[bank]->maskb = 0; | 673 | gpio_bankb[bank]->maskb = 0; |
680 | 674 | ||
681 | if (mask) { | 675 | if (mask) { |
682 | #if defined(BF527_FAMILY) || defined(BF537_FAMILY) | 676 | #if defined(BF527_FAMILY) || defined(BF537_FAMILY) || defined(BF518_FAMILY) |
683 | gpio_bank_saved[bank].fer = *port_fer[bank]; | 677 | gpio_bank_saved[bank].fer = *port_fer[bank]; |
684 | #endif | 678 | #endif |
685 | gpio_bank_saved[bank].inen = gpio_bankb[bank]->inen; | 679 | gpio_bank_saved[bank].inen = gpio_bankb[bank]->inen; |
@@ -724,7 +718,7 @@ void bfin_pm_standby_restore(void) | |||
724 | bank = gpio_bank(i); | 718 | bank = gpio_bank(i); |
725 | 719 | ||
726 | if (mask) { | 720 | if (mask) { |
727 | #if defined(BF527_FAMILY) || defined(BF537_FAMILY) | 721 | #if defined(BF527_FAMILY) || defined(BF537_FAMILY) || defined(BF518_FAMILY) |
728 | *port_fer[bank] = gpio_bank_saved[bank].fer; | 722 | *port_fer[bank] = gpio_bank_saved[bank].fer; |
729 | #endif | 723 | #endif |
730 | gpio_bankb[bank]->inen = gpio_bank_saved[bank].inen; | 724 | gpio_bankb[bank]->inen = gpio_bank_saved[bank].inen; |
@@ -750,9 +744,9 @@ void bfin_gpio_pm_hibernate_suspend(void) | |||
750 | for (i = 0; i < MAX_BLACKFIN_GPIOS; i += GPIO_BANKSIZE) { | 744 | for (i = 0; i < MAX_BLACKFIN_GPIOS; i += GPIO_BANKSIZE) { |
751 | bank = gpio_bank(i); | 745 | bank = gpio_bank(i); |
752 | 746 | ||
753 | #if defined(BF527_FAMILY) || defined(BF537_FAMILY) | 747 | #if defined(BF527_FAMILY) || defined(BF537_FAMILY) || defined(BF518_FAMILY) |
754 | gpio_bank_saved[bank].fer = *port_fer[bank]; | 748 | gpio_bank_saved[bank].fer = *port_fer[bank]; |
755 | #ifdef BF527_FAMILY | 749 | #if defined(BF527_FAMILY) || defined(BF518_FAMILY) |
756 | gpio_bank_saved[bank].mux = *port_mux[bank]; | 750 | gpio_bank_saved[bank].mux = *port_mux[bank]; |
757 | #else | 751 | #else |
758 | if (bank == 0) | 752 | if (bank == 0) |
@@ -778,8 +772,8 @@ void bfin_gpio_pm_hibernate_restore(void) | |||
778 | for (i = 0; i < MAX_BLACKFIN_GPIOS; i += GPIO_BANKSIZE) { | 772 | for (i = 0; i < MAX_BLACKFIN_GPIOS; i += GPIO_BANKSIZE) { |
779 | bank = gpio_bank(i); | 773 | bank = gpio_bank(i); |
780 | 774 | ||
781 | #if defined(BF527_FAMILY) || defined(BF537_FAMILY) | 775 | #if defined(BF527_FAMILY) || defined(BF537_FAMILY) || defined(BF518_FAMILY) |
782 | #ifdef BF527_FAMILY | 776 | #if defined(BF527_FAMILY) || defined(BF518_FAMILY) |
783 | *port_mux[bank] = gpio_bank_saved[bank].mux; | 777 | *port_mux[bank] = gpio_bank_saved[bank].mux; |
784 | #else | 778 | #else |
785 | if (bank == 0) | 779 | if (bank == 0) |
@@ -873,7 +867,6 @@ EXPORT_SYMBOL(get_gpio_dir); | |||
873 | * MODIFICATION HISTORY : | 867 | * MODIFICATION HISTORY : |
874 | **************************************************************/ | 868 | **************************************************************/ |
875 | 869 | ||
876 | #ifdef BF548_FAMILY | ||
877 | int peripheral_request(unsigned short per, const char *label) | 870 | int peripheral_request(unsigned short per, const char *label) |
878 | { | 871 | { |
879 | unsigned long flags; | 872 | unsigned long flags; |
@@ -889,31 +882,35 @@ int peripheral_request(unsigned short per, const char *label) | |||
889 | if (!(per & P_DEFINED)) | 882 | if (!(per & P_DEFINED)) |
890 | return -ENODEV; | 883 | return -ENODEV; |
891 | 884 | ||
892 | if (check_gpio(ident) < 0) | 885 | local_irq_save_hw(flags); |
893 | return -EINVAL; | ||
894 | 886 | ||
895 | local_irq_save(flags); | 887 | /* If a pin can be muxed as either GPIO or peripheral, make |
896 | 888 | * sure it is not already a GPIO pin when we request it. | |
897 | if (unlikely(reserved_gpio_map[gpio_bank(ident)] & gpio_bit(ident))) { | 889 | */ |
890 | if (unlikely(!check_gpio(ident) && | ||
891 | reserved_gpio_map[gpio_bank(ident)] & gpio_bit(ident))) { | ||
898 | dump_stack(); | 892 | dump_stack(); |
899 | printk(KERN_ERR | 893 | printk(KERN_ERR |
900 | "%s: Peripheral %d is already reserved as GPIO by %s !\n", | 894 | "%s: Peripheral %d is already reserved as GPIO by %s !\n", |
901 | __func__, ident, get_label(ident)); | 895 | __func__, ident, get_label(ident)); |
902 | local_irq_restore(flags); | 896 | local_irq_restore_hw(flags); |
903 | return -EBUSY; | 897 | return -EBUSY; |
904 | } | 898 | } |
905 | 899 | ||
906 | if (unlikely(reserved_peri_map[gpio_bank(ident)] & gpio_bit(ident))) { | 900 | if (unlikely(reserved_peri_map[gpio_bank(ident)] & gpio_bit(ident))) { |
907 | 901 | ||
908 | u16 funct = get_portmux(ident); | ||
909 | |||
910 | /* | 902 | /* |
911 | * Pin functions like AMC address strobes my | 903 | * Pin functions like AMC address strobes my |
912 | * be requested and used by several drivers | 904 | * be requested and used by several drivers |
913 | */ | 905 | */ |
914 | 906 | ||
915 | if (!((per & P_MAYSHARE) && (funct == P_FUNCT2MUX(per)))) { | 907 | #ifdef BF548_FAMILY |
908 | u16 funct = get_portmux(ident); | ||
916 | 909 | ||
910 | if (!((per & P_MAYSHARE) && (funct == P_FUNCT2MUX(per)))) { | ||
911 | #else | ||
912 | if (!(per & P_MAYSHARE)) { | ||
913 | #endif | ||
917 | /* | 914 | /* |
918 | * Allow that the identical pin function can | 915 | * Allow that the identical pin function can |
919 | * be requested from the same driver twice | 916 | * be requested from the same driver twice |
@@ -926,7 +923,7 @@ int peripheral_request(unsigned short per, const char *label) | |||
926 | printk(KERN_ERR | 923 | printk(KERN_ERR |
927 | "%s: Peripheral %d function %d is already reserved by %s !\n", | 924 | "%s: Peripheral %d function %d is already reserved by %s !\n", |
928 | __func__, ident, P_FUNCT2MUX(per), get_label(ident)); | 925 | __func__, ident, P_FUNCT2MUX(per), get_label(ident)); |
929 | local_irq_restore(flags); | 926 | local_irq_restore_hw(flags); |
930 | return -EBUSY; | 927 | return -EBUSY; |
931 | } | 928 | } |
932 | } | 929 | } |
@@ -934,89 +931,19 @@ int peripheral_request(unsigned short per, const char *label) | |||
934 | anyway: | 931 | anyway: |
935 | reserved_peri_map[gpio_bank(ident)] |= gpio_bit(ident); | 932 | reserved_peri_map[gpio_bank(ident)] |= gpio_bit(ident); |
936 | 933 | ||
934 | #ifdef BF548_FAMILY | ||
937 | portmux_setup(ident, P_FUNCT2MUX(per)); | 935 | portmux_setup(ident, P_FUNCT2MUX(per)); |
938 | port_setup(ident, PERIPHERAL_USAGE); | ||
939 | |||
940 | local_irq_restore(flags); | ||
941 | set_label(ident, label); | ||
942 | |||
943 | return 0; | ||
944 | } | ||
945 | EXPORT_SYMBOL(peripheral_request); | ||
946 | #else | 936 | #else |
947 | |||
948 | int peripheral_request(unsigned short per, const char *label) | ||
949 | { | ||
950 | unsigned long flags; | ||
951 | unsigned short ident = P_IDENT(per); | ||
952 | |||
953 | /* | ||
954 | * Don't cares are pins with only one dedicated function | ||
955 | */ | ||
956 | |||
957 | if (per & P_DONTCARE) | ||
958 | return 0; | ||
959 | |||
960 | if (!(per & P_DEFINED)) | ||
961 | return -ENODEV; | ||
962 | |||
963 | local_irq_save(flags); | ||
964 | |||
965 | if (!check_gpio(ident)) { | ||
966 | |||
967 | if (unlikely(reserved_gpio_map[gpio_bank(ident)] & gpio_bit(ident))) { | ||
968 | dump_stack(); | ||
969 | printk(KERN_ERR | ||
970 | "%s: Peripheral %d is already reserved as GPIO by %s !\n", | ||
971 | __func__, ident, get_label(ident)); | ||
972 | local_irq_restore(flags); | ||
973 | return -EBUSY; | ||
974 | } | ||
975 | |||
976 | } | ||
977 | |||
978 | if (unlikely(reserved_peri_map[gpio_bank(ident)] & gpio_bit(ident))) { | ||
979 | |||
980 | /* | ||
981 | * Pin functions like AMC address strobes my | ||
982 | * be requested and used by several drivers | ||
983 | */ | ||
984 | |||
985 | if (!(per & P_MAYSHARE)) { | ||
986 | |||
987 | /* | ||
988 | * Allow that the identical pin function can | ||
989 | * be requested from the same driver twice | ||
990 | */ | ||
991 | |||
992 | if (cmp_label(ident, label) == 0) | ||
993 | goto anyway; | ||
994 | |||
995 | dump_stack(); | ||
996 | printk(KERN_ERR | ||
997 | "%s: Peripheral %d function %d is already" | ||
998 | " reserved by %s !\n", | ||
999 | __func__, ident, P_FUNCT2MUX(per), | ||
1000 | get_label(ident)); | ||
1001 | local_irq_restore(flags); | ||
1002 | return -EBUSY; | ||
1003 | } | ||
1004 | |||
1005 | } | ||
1006 | |||
1007 | anyway: | ||
1008 | portmux_setup(per, P_FUNCT2MUX(per)); | 937 | portmux_setup(per, P_FUNCT2MUX(per)); |
1009 | 938 | #endif | |
1010 | port_setup(ident, PERIPHERAL_USAGE); | 939 | port_setup(ident, PERIPHERAL_USAGE); |
1011 | 940 | ||
1012 | reserved_peri_map[gpio_bank(ident)] |= gpio_bit(ident); | 941 | local_irq_restore_hw(flags); |
1013 | local_irq_restore(flags); | ||
1014 | set_label(ident, label); | 942 | set_label(ident, label); |
1015 | 943 | ||
1016 | return 0; | 944 | return 0; |
1017 | } | 945 | } |
1018 | EXPORT_SYMBOL(peripheral_request); | 946 | EXPORT_SYMBOL(peripheral_request); |
1019 | #endif | ||
1020 | 947 | ||
1021 | int peripheral_request_list(const unsigned short per[], const char *label) | 948 | int peripheral_request_list(const unsigned short per[], const char *label) |
1022 | { | 949 | { |
@@ -1053,10 +980,10 @@ void peripheral_free(unsigned short per) | |||
1053 | if (check_gpio(ident) < 0) | 980 | if (check_gpio(ident) < 0) |
1054 | return; | 981 | return; |
1055 | 982 | ||
1056 | local_irq_save(flags); | 983 | local_irq_save_hw(flags); |
1057 | 984 | ||
1058 | if (unlikely(!(reserved_peri_map[gpio_bank(ident)] & gpio_bit(ident)))) { | 985 | if (unlikely(!(reserved_peri_map[gpio_bank(ident)] & gpio_bit(ident)))) { |
1059 | local_irq_restore(flags); | 986 | local_irq_restore_hw(flags); |
1060 | return; | 987 | return; |
1061 | } | 988 | } |
1062 | 989 | ||
@@ -1067,7 +994,7 @@ void peripheral_free(unsigned short per) | |||
1067 | 994 | ||
1068 | set_label(ident, "free"); | 995 | set_label(ident, "free"); |
1069 | 996 | ||
1070 | local_irq_restore(flags); | 997 | local_irq_restore_hw(flags); |
1071 | } | 998 | } |
1072 | EXPORT_SYMBOL(peripheral_free); | 999 | EXPORT_SYMBOL(peripheral_free); |
1073 | 1000 | ||
@@ -1094,14 +1021,14 @@ EXPORT_SYMBOL(peripheral_free_list); | |||
1094 | * MODIFICATION HISTORY : | 1021 | * MODIFICATION HISTORY : |
1095 | **************************************************************/ | 1022 | **************************************************************/ |
1096 | 1023 | ||
1097 | int gpio_request(unsigned gpio, const char *label) | 1024 | int bfin_gpio_request(unsigned gpio, const char *label) |
1098 | { | 1025 | { |
1099 | unsigned long flags; | 1026 | unsigned long flags; |
1100 | 1027 | ||
1101 | if (check_gpio(gpio) < 0) | 1028 | if (check_gpio(gpio) < 0) |
1102 | return -EINVAL; | 1029 | return -EINVAL; |
1103 | 1030 | ||
1104 | local_irq_save(flags); | 1031 | local_irq_save_hw(flags); |
1105 | 1032 | ||
1106 | /* | 1033 | /* |
1107 | * Allow that the identical GPIO can | 1034 | * Allow that the identical GPIO can |
@@ -1110,15 +1037,15 @@ int gpio_request(unsigned gpio, const char *label) | |||
1110 | */ | 1037 | */ |
1111 | 1038 | ||
1112 | if (cmp_label(gpio, label) == 0) { | 1039 | if (cmp_label(gpio, label) == 0) { |
1113 | local_irq_restore(flags); | 1040 | local_irq_restore_hw(flags); |
1114 | return 0; | 1041 | return 0; |
1115 | } | 1042 | } |
1116 | 1043 | ||
1117 | if (unlikely(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))) { | 1044 | if (unlikely(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))) { |
1118 | dump_stack(); | 1045 | dump_stack(); |
1119 | printk(KERN_ERR "bfin-gpio: GPIO %d is already reserved by %s !\n", | 1046 | printk(KERN_ERR "bfin-gpio: GPIO %d is already reserved by %s !\n", |
1120 | gpio, get_label(gpio)); | 1047 | gpio, get_label(gpio)); |
1121 | local_irq_restore(flags); | 1048 | local_irq_restore_hw(flags); |
1122 | return -EBUSY; | 1049 | return -EBUSY; |
1123 | } | 1050 | } |
1124 | if (unlikely(reserved_peri_map[gpio_bank(gpio)] & gpio_bit(gpio))) { | 1051 | if (unlikely(reserved_peri_map[gpio_bank(gpio)] & gpio_bit(gpio))) { |
@@ -1126,34 +1053,37 @@ int gpio_request(unsigned gpio, const char *label) | |||
1126 | printk(KERN_ERR | 1053 | printk(KERN_ERR |
1127 | "bfin-gpio: GPIO %d is already reserved as Peripheral by %s !\n", | 1054 | "bfin-gpio: GPIO %d is already reserved as Peripheral by %s !\n", |
1128 | gpio, get_label(gpio)); | 1055 | gpio, get_label(gpio)); |
1129 | local_irq_restore(flags); | 1056 | local_irq_restore_hw(flags); |
1130 | return -EBUSY; | 1057 | return -EBUSY; |
1131 | } | 1058 | } |
1059 | if (unlikely(reserved_gpio_irq_map[gpio_bank(gpio)] & gpio_bit(gpio))) | ||
1060 | printk(KERN_NOTICE "bfin-gpio: GPIO %d is already reserved as gpio-irq!" | ||
1061 | " (Documentation/blackfin/bfin-gpio-notes.txt)\n", gpio); | ||
1132 | 1062 | ||
1133 | reserved_gpio_map[gpio_bank(gpio)] |= gpio_bit(gpio); | 1063 | reserved_gpio_map[gpio_bank(gpio)] |= gpio_bit(gpio); |
1064 | set_label(gpio, label); | ||
1134 | 1065 | ||
1135 | local_irq_restore(flags); | 1066 | local_irq_restore_hw(flags); |
1136 | 1067 | ||
1137 | port_setup(gpio, GPIO_USAGE); | 1068 | port_setup(gpio, GPIO_USAGE); |
1138 | set_label(gpio, label); | ||
1139 | 1069 | ||
1140 | return 0; | 1070 | return 0; |
1141 | } | 1071 | } |
1142 | EXPORT_SYMBOL(gpio_request); | 1072 | EXPORT_SYMBOL(bfin_gpio_request); |
1143 | 1073 | ||
1144 | void gpio_free(unsigned gpio) | 1074 | void bfin_gpio_free(unsigned gpio) |
1145 | { | 1075 | { |
1146 | unsigned long flags; | 1076 | unsigned long flags; |
1147 | 1077 | ||
1148 | if (check_gpio(gpio) < 0) | 1078 | if (check_gpio(gpio) < 0) |
1149 | return; | 1079 | return; |
1150 | 1080 | ||
1151 | local_irq_save(flags); | 1081 | local_irq_save_hw(flags); |
1152 | 1082 | ||
1153 | if (unlikely(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio)))) { | 1083 | if (unlikely(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio)))) { |
1154 | dump_stack(); | 1084 | dump_stack(); |
1155 | gpio_error(gpio); | 1085 | gpio_error(gpio); |
1156 | local_irq_restore(flags); | 1086 | local_irq_restore_hw(flags); |
1157 | return; | 1087 | return; |
1158 | } | 1088 | } |
1159 | 1089 | ||
@@ -1161,13 +1091,76 @@ void gpio_free(unsigned gpio) | |||
1161 | 1091 | ||
1162 | set_label(gpio, "free"); | 1092 | set_label(gpio, "free"); |
1163 | 1093 | ||
1164 | local_irq_restore(flags); | 1094 | local_irq_restore_hw(flags); |
1095 | } | ||
1096 | EXPORT_SYMBOL(bfin_gpio_free); | ||
1097 | |||
1098 | int bfin_gpio_irq_request(unsigned gpio, const char *label) | ||
1099 | { | ||
1100 | unsigned long flags; | ||
1101 | |||
1102 | if (check_gpio(gpio) < 0) | ||
1103 | return -EINVAL; | ||
1104 | |||
1105 | local_irq_save_hw(flags); | ||
1106 | |||
1107 | if (unlikely(reserved_gpio_irq_map[gpio_bank(gpio)] & gpio_bit(gpio))) { | ||
1108 | dump_stack(); | ||
1109 | printk(KERN_ERR | ||
1110 | "bfin-gpio: GPIO %d is already reserved as gpio-irq !\n", | ||
1111 | gpio); | ||
1112 | local_irq_restore_hw(flags); | ||
1113 | return -EBUSY; | ||
1114 | } | ||
1115 | if (unlikely(reserved_peri_map[gpio_bank(gpio)] & gpio_bit(gpio))) { | ||
1116 | dump_stack(); | ||
1117 | printk(KERN_ERR | ||
1118 | "bfin-gpio: GPIO %d is already reserved as Peripheral by %s !\n", | ||
1119 | gpio, get_label(gpio)); | ||
1120 | local_irq_restore_hw(flags); | ||
1121 | return -EBUSY; | ||
1122 | } | ||
1123 | if (unlikely(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))) | ||
1124 | printk(KERN_NOTICE "bfin-gpio: GPIO %d is already reserved by %s! " | ||
1125 | "(Documentation/blackfin/bfin-gpio-notes.txt)\n", | ||
1126 | gpio, get_label(gpio)); | ||
1127 | |||
1128 | reserved_gpio_irq_map[gpio_bank(gpio)] |= gpio_bit(gpio); | ||
1129 | set_label(gpio, label); | ||
1130 | |||
1131 | local_irq_restore_hw(flags); | ||
1132 | |||
1133 | port_setup(gpio, GPIO_USAGE); | ||
1134 | |||
1135 | return 0; | ||
1136 | } | ||
1137 | |||
1138 | void bfin_gpio_irq_free(unsigned gpio) | ||
1139 | { | ||
1140 | unsigned long flags; | ||
1141 | |||
1142 | if (check_gpio(gpio) < 0) | ||
1143 | return; | ||
1144 | |||
1145 | local_irq_save_hw(flags); | ||
1146 | |||
1147 | if (unlikely(!(reserved_gpio_irq_map[gpio_bank(gpio)] & gpio_bit(gpio)))) { | ||
1148 | dump_stack(); | ||
1149 | gpio_error(gpio); | ||
1150 | local_irq_restore_hw(flags); | ||
1151 | return; | ||
1152 | } | ||
1153 | |||
1154 | reserved_gpio_irq_map[gpio_bank(gpio)] &= ~gpio_bit(gpio); | ||
1155 | |||
1156 | set_label(gpio, "free"); | ||
1157 | |||
1158 | local_irq_restore_hw(flags); | ||
1165 | } | 1159 | } |
1166 | EXPORT_SYMBOL(gpio_free); | ||
1167 | 1160 | ||
1168 | 1161 | ||
1169 | #ifdef BF548_FAMILY | 1162 | #ifdef BF548_FAMILY |
1170 | int gpio_direction_input(unsigned gpio) | 1163 | int bfin_gpio_direction_input(unsigned gpio) |
1171 | { | 1164 | { |
1172 | unsigned long flags; | 1165 | unsigned long flags; |
1173 | 1166 | ||
@@ -1176,16 +1169,16 @@ int gpio_direction_input(unsigned gpio) | |||
1176 | return -EINVAL; | 1169 | return -EINVAL; |
1177 | } | 1170 | } |
1178 | 1171 | ||
1179 | local_irq_save(flags); | 1172 | local_irq_save_hw(flags); |
1180 | gpio_array[gpio_bank(gpio)]->port_dir_clear = gpio_bit(gpio); | 1173 | gpio_array[gpio_bank(gpio)]->port_dir_clear = gpio_bit(gpio); |
1181 | gpio_array[gpio_bank(gpio)]->port_inen |= gpio_bit(gpio); | 1174 | gpio_array[gpio_bank(gpio)]->port_inen |= gpio_bit(gpio); |
1182 | local_irq_restore(flags); | 1175 | local_irq_restore_hw(flags); |
1183 | 1176 | ||
1184 | return 0; | 1177 | return 0; |
1185 | } | 1178 | } |
1186 | EXPORT_SYMBOL(gpio_direction_input); | 1179 | EXPORT_SYMBOL(bfin_gpio_direction_input); |
1187 | 1180 | ||
1188 | int gpio_direction_output(unsigned gpio, int value) | 1181 | int bfin_gpio_direction_output(unsigned gpio, int value) |
1189 | { | 1182 | { |
1190 | unsigned long flags; | 1183 | unsigned long flags; |
1191 | 1184 | ||
@@ -1194,30 +1187,30 @@ int gpio_direction_output(unsigned gpio, int value) | |||
1194 | return -EINVAL; | 1187 | return -EINVAL; |
1195 | } | 1188 | } |
1196 | 1189 | ||
1197 | local_irq_save(flags); | 1190 | local_irq_save_hw(flags); |
1198 | gpio_array[gpio_bank(gpio)]->port_inen &= ~gpio_bit(gpio); | 1191 | gpio_array[gpio_bank(gpio)]->port_inen &= ~gpio_bit(gpio); |
1199 | gpio_set_value(gpio, value); | 1192 | gpio_set_value(gpio, value); |
1200 | gpio_array[gpio_bank(gpio)]->port_dir_set = gpio_bit(gpio); | 1193 | gpio_array[gpio_bank(gpio)]->port_dir_set = gpio_bit(gpio); |
1201 | local_irq_restore(flags); | 1194 | local_irq_restore_hw(flags); |
1202 | 1195 | ||
1203 | return 0; | 1196 | return 0; |
1204 | } | 1197 | } |
1205 | EXPORT_SYMBOL(gpio_direction_output); | 1198 | EXPORT_SYMBOL(bfin_gpio_direction_output); |
1206 | 1199 | ||
1207 | void gpio_set_value(unsigned gpio, int arg) | 1200 | void bfin_gpio_set_value(unsigned gpio, int arg) |
1208 | { | 1201 | { |
1209 | if (arg) | 1202 | if (arg) |
1210 | gpio_array[gpio_bank(gpio)]->port_set = gpio_bit(gpio); | 1203 | gpio_array[gpio_bank(gpio)]->port_set = gpio_bit(gpio); |
1211 | else | 1204 | else |
1212 | gpio_array[gpio_bank(gpio)]->port_clear = gpio_bit(gpio); | 1205 | gpio_array[gpio_bank(gpio)]->port_clear = gpio_bit(gpio); |
1213 | } | 1206 | } |
1214 | EXPORT_SYMBOL(gpio_set_value); | 1207 | EXPORT_SYMBOL(bfin_gpio_set_value); |
1215 | 1208 | ||
1216 | int gpio_get_value(unsigned gpio) | 1209 | int bfin_gpio_get_value(unsigned gpio) |
1217 | { | 1210 | { |
1218 | return (1 & (gpio_array[gpio_bank(gpio)]->port_data >> gpio_sub_n(gpio))); | 1211 | return (1 & (gpio_array[gpio_bank(gpio)]->port_data >> gpio_sub_n(gpio))); |
1219 | } | 1212 | } |
1220 | EXPORT_SYMBOL(gpio_get_value); | 1213 | EXPORT_SYMBOL(bfin_gpio_get_value); |
1221 | 1214 | ||
1222 | void bfin_gpio_irq_prepare(unsigned gpio) | 1215 | void bfin_gpio_irq_prepare(unsigned gpio) |
1223 | { | 1216 | { |
@@ -1225,34 +1218,34 @@ void bfin_gpio_irq_prepare(unsigned gpio) | |||
1225 | 1218 | ||
1226 | port_setup(gpio, GPIO_USAGE); | 1219 | port_setup(gpio, GPIO_USAGE); |
1227 | 1220 | ||
1228 | local_irq_save(flags); | 1221 | local_irq_save_hw(flags); |
1229 | gpio_array[gpio_bank(gpio)]->port_dir_clear = gpio_bit(gpio); | 1222 | gpio_array[gpio_bank(gpio)]->port_dir_clear = gpio_bit(gpio); |
1230 | gpio_array[gpio_bank(gpio)]->port_inen |= gpio_bit(gpio); | 1223 | gpio_array[gpio_bank(gpio)]->port_inen |= gpio_bit(gpio); |
1231 | local_irq_restore(flags); | 1224 | local_irq_restore_hw(flags); |
1232 | } | 1225 | } |
1233 | 1226 | ||
1234 | #else | 1227 | #else |
1235 | 1228 | ||
1236 | int gpio_get_value(unsigned gpio) | 1229 | int bfin_gpio_get_value(unsigned gpio) |
1237 | { | 1230 | { |
1238 | unsigned long flags; | 1231 | unsigned long flags; |
1239 | int ret; | 1232 | int ret; |
1240 | 1233 | ||
1241 | if (unlikely(get_gpio_edge(gpio))) { | 1234 | if (unlikely(get_gpio_edge(gpio))) { |
1242 | local_irq_save(flags); | 1235 | local_irq_save_hw(flags); |
1243 | set_gpio_edge(gpio, 0); | 1236 | set_gpio_edge(gpio, 0); |
1244 | ret = get_gpio_data(gpio); | 1237 | ret = get_gpio_data(gpio); |
1245 | set_gpio_edge(gpio, 1); | 1238 | set_gpio_edge(gpio, 1); |
1246 | local_irq_restore(flags); | 1239 | local_irq_restore_hw(flags); |
1247 | 1240 | ||
1248 | return ret; | 1241 | return ret; |
1249 | } else | 1242 | } else |
1250 | return get_gpio_data(gpio); | 1243 | return get_gpio_data(gpio); |
1251 | } | 1244 | } |
1252 | EXPORT_SYMBOL(gpio_get_value); | 1245 | EXPORT_SYMBOL(bfin_gpio_get_value); |
1253 | 1246 | ||
1254 | 1247 | ||
1255 | int gpio_direction_input(unsigned gpio) | 1248 | int bfin_gpio_direction_input(unsigned gpio) |
1256 | { | 1249 | { |
1257 | unsigned long flags; | 1250 | unsigned long flags; |
1258 | 1251 | ||
@@ -1261,17 +1254,17 @@ int gpio_direction_input(unsigned gpio) | |||
1261 | return -EINVAL; | 1254 | return -EINVAL; |
1262 | } | 1255 | } |
1263 | 1256 | ||
1264 | local_irq_save(flags); | 1257 | local_irq_save_hw(flags); |
1265 | gpio_bankb[gpio_bank(gpio)]->dir &= ~gpio_bit(gpio); | 1258 | gpio_bankb[gpio_bank(gpio)]->dir &= ~gpio_bit(gpio); |
1266 | gpio_bankb[gpio_bank(gpio)]->inen |= gpio_bit(gpio); | 1259 | gpio_bankb[gpio_bank(gpio)]->inen |= gpio_bit(gpio); |
1267 | AWA_DUMMY_READ(inen); | 1260 | AWA_DUMMY_READ(inen); |
1268 | local_irq_restore(flags); | 1261 | local_irq_restore_hw(flags); |
1269 | 1262 | ||
1270 | return 0; | 1263 | return 0; |
1271 | } | 1264 | } |
1272 | EXPORT_SYMBOL(gpio_direction_input); | 1265 | EXPORT_SYMBOL(bfin_gpio_direction_input); |
1273 | 1266 | ||
1274 | int gpio_direction_output(unsigned gpio, int value) | 1267 | int bfin_gpio_direction_output(unsigned gpio, int value) |
1275 | { | 1268 | { |
1276 | unsigned long flags; | 1269 | unsigned long flags; |
1277 | 1270 | ||
@@ -1280,7 +1273,7 @@ int gpio_direction_output(unsigned gpio, int value) | |||
1280 | return -EINVAL; | 1273 | return -EINVAL; |
1281 | } | 1274 | } |
1282 | 1275 | ||
1283 | local_irq_save(flags); | 1276 | local_irq_save_hw(flags); |
1284 | gpio_bankb[gpio_bank(gpio)]->inen &= ~gpio_bit(gpio); | 1277 | gpio_bankb[gpio_bank(gpio)]->inen &= ~gpio_bit(gpio); |
1285 | 1278 | ||
1286 | if (value) | 1279 | if (value) |
@@ -1290,11 +1283,11 @@ int gpio_direction_output(unsigned gpio, int value) | |||
1290 | 1283 | ||
1291 | gpio_bankb[gpio_bank(gpio)]->dir |= gpio_bit(gpio); | 1284 | gpio_bankb[gpio_bank(gpio)]->dir |= gpio_bit(gpio); |
1292 | AWA_DUMMY_READ(dir); | 1285 | AWA_DUMMY_READ(dir); |
1293 | local_irq_restore(flags); | 1286 | local_irq_restore_hw(flags); |
1294 | 1287 | ||
1295 | return 0; | 1288 | return 0; |
1296 | } | 1289 | } |
1297 | EXPORT_SYMBOL(gpio_direction_output); | 1290 | EXPORT_SYMBOL(bfin_gpio_direction_output); |
1298 | 1291 | ||
1299 | /* If we are booting from SPI and our board lacks a strong enough pull up, | 1292 | /* If we are booting from SPI and our board lacks a strong enough pull up, |
1300 | * the core can reset and execute the bootrom faster than the resistor can | 1293 | * the core can reset and execute the bootrom faster than the resistor can |
@@ -1327,14 +1320,17 @@ void bfin_gpio_irq_prepare(unsigned gpio) | |||
1327 | static int gpio_proc_read(char *buf, char **start, off_t offset, | 1320 | static int gpio_proc_read(char *buf, char **start, off_t offset, |
1328 | int len, int *unused_i, void *unused_v) | 1321 | int len, int *unused_i, void *unused_v) |
1329 | { | 1322 | { |
1330 | int c, outlen = 0; | 1323 | int c, irq, gpio, outlen = 0; |
1331 | 1324 | ||
1332 | for (c = 0; c < MAX_RESOURCES; c++) { | 1325 | for (c = 0; c < MAX_RESOURCES; c++) { |
1333 | if (!check_gpio(c) && (reserved_gpio_map[gpio_bank(c)] & gpio_bit(c))) | 1326 | irq = reserved_gpio_irq_map[gpio_bank(c)] & gpio_bit(c); |
1334 | len = sprintf(buf, "GPIO_%d: %s \t\tGPIO %s\n", c, | 1327 | gpio = reserved_gpio_map[gpio_bank(c)] & gpio_bit(c); |
1335 | get_label(c), get_gpio_dir(c) ? "OUTPUT" : "INPUT"); | 1328 | if (!check_gpio(c) && (gpio || irq)) |
1329 | len = sprintf(buf, "GPIO_%d: \t%s%s \t\tGPIO %s\n", c, | ||
1330 | get_label(c), (gpio && irq) ? " *" : "", | ||
1331 | get_gpio_dir(c) ? "OUTPUT" : "INPUT"); | ||
1336 | else if (reserved_peri_map[gpio_bank(c)] & gpio_bit(c)) | 1332 | else if (reserved_peri_map[gpio_bank(c)] & gpio_bit(c)) |
1337 | len = sprintf(buf, "GPIO_%d: %s \t\tPeripheral\n", c, get_label(c)); | 1333 | len = sprintf(buf, "GPIO_%d: \t%s \t\tPeripheral\n", c, get_label(c)); |
1338 | else | 1334 | else |
1339 | continue; | 1335 | continue; |
1340 | buf += len; | 1336 | buf += len; |
@@ -1354,3 +1350,57 @@ static __init int gpio_register_proc(void) | |||
1354 | } | 1350 | } |
1355 | __initcall(gpio_register_proc); | 1351 | __initcall(gpio_register_proc); |
1356 | #endif | 1352 | #endif |
1353 | |||
1354 | #ifdef CONFIG_GPIOLIB | ||
1355 | int bfin_gpiolib_direction_input(struct gpio_chip *chip, unsigned gpio) | ||
1356 | { | ||
1357 | return bfin_gpio_direction_input(gpio); | ||
1358 | } | ||
1359 | |||
1360 | int bfin_gpiolib_direction_output(struct gpio_chip *chip, unsigned gpio, int level) | ||
1361 | { | ||
1362 | return bfin_gpio_direction_output(gpio, level); | ||
1363 | } | ||
1364 | |||
1365 | int bfin_gpiolib_get_value(struct gpio_chip *chip, unsigned gpio) | ||
1366 | { | ||
1367 | return bfin_gpio_get_value(gpio); | ||
1368 | } | ||
1369 | |||
1370 | void bfin_gpiolib_set_value(struct gpio_chip *chip, unsigned gpio, int value) | ||
1371 | { | ||
1372 | #ifdef BF548_FAMILY | ||
1373 | return bfin_gpio_set_value(gpio, value); | ||
1374 | #else | ||
1375 | return set_gpio_data(gpio, value); | ||
1376 | #endif | ||
1377 | } | ||
1378 | |||
1379 | int bfin_gpiolib_gpio_request(struct gpio_chip *chip, unsigned gpio) | ||
1380 | { | ||
1381 | return bfin_gpio_request(gpio, chip->label); | ||
1382 | } | ||
1383 | |||
1384 | void bfin_gpiolib_gpio_free(struct gpio_chip *chip, unsigned gpio) | ||
1385 | { | ||
1386 | return bfin_gpio_free(gpio); | ||
1387 | } | ||
1388 | |||
1389 | static struct gpio_chip bfin_chip = { | ||
1390 | .label = "Blackfin-GPIOlib", | ||
1391 | .direction_input = bfin_gpiolib_direction_input, | ||
1392 | .get = bfin_gpiolib_get_value, | ||
1393 | .direction_output = bfin_gpiolib_direction_output, | ||
1394 | .set = bfin_gpiolib_set_value, | ||
1395 | .request = bfin_gpiolib_gpio_request, | ||
1396 | .free = bfin_gpiolib_gpio_free, | ||
1397 | .base = 0, | ||
1398 | .ngpio = MAX_BLACKFIN_GPIOS, | ||
1399 | }; | ||
1400 | |||
1401 | static int __init bfin_gpiolib_setup(void) | ||
1402 | { | ||
1403 | return gpiochip_add(&bfin_chip); | ||
1404 | } | ||
1405 | arch_initcall(bfin_gpiolib_setup); | ||
1406 | #endif | ||
diff --git a/arch/blackfin/kernel/bfin_ksyms.c b/arch/blackfin/kernel/bfin_ksyms.c index 4367330909b2..01f917d58b59 100644 --- a/arch/blackfin/kernel/bfin_ksyms.c +++ b/arch/blackfin/kernel/bfin_ksyms.c | |||
@@ -1,52 +1,25 @@ | |||
1 | /* | 1 | /* |
2 | * File: arch/blackfin/kernel/bfin_ksyms.c | 2 | * arch/blackfin/kernel/bfin_ksyms.c - exports for random symbols |
3 | * Based on: none - original work | ||
4 | * Author: | ||
5 | * | 3 | * |
6 | * Created: | 4 | * Copyright 2004-2008 Analog Devices Inc. |
7 | * Description: | ||
8 | * | 5 | * |
9 | * Modified: | 6 | * Licensed under the GPL-2 or later. |
10 | * Copyright 2004-2006 Analog Devices Inc. | ||
11 | * | ||
12 | * Bugs: Enter bugs at http://blackfin.uclinux.org/ | ||
13 | * | ||
14 | * This program is free software; you can redistribute it and/or modify | ||
15 | * it under the terms of the GNU General Public License as published by | ||
16 | * the Free Software Foundation; either version 2 of the License, or | ||
17 | * (at your option) any later version. | ||
18 | * | ||
19 | * This program is distributed in the hope that it will be useful, | ||
20 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | ||
21 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | ||
22 | * GNU General Public License for more details. | ||
23 | * | ||
24 | * You should have received a copy of the GNU General Public License | ||
25 | * along with this program; if not, see the file COPYING, or write | ||
26 | * to the Free Software Foundation, Inc., | ||
27 | * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA | ||
28 | */ | 7 | */ |
29 | 8 | ||
30 | #include <linux/module.h> | 9 | #include <linux/module.h> |
31 | #include <linux/irq.h> | ||
32 | #include <linux/uaccess.h> | 10 | #include <linux/uaccess.h> |
33 | 11 | ||
34 | #include <asm/checksum.h> | ||
35 | #include <asm/cacheflush.h> | 12 | #include <asm/cacheflush.h> |
36 | 13 | ||
37 | /* platform dependent support */ | 14 | /* Allow people to have their own Blackfin exception handler in a module */ |
38 | |||
39 | EXPORT_SYMBOL(__ioremap); | ||
40 | |||
41 | EXPORT_SYMBOL(ip_fast_csum); | ||
42 | |||
43 | EXPORT_SYMBOL(kernel_thread); | ||
44 | |||
45 | EXPORT_SYMBOL(is_in_rom); | ||
46 | EXPORT_SYMBOL(bfin_return_from_exception); | 15 | EXPORT_SYMBOL(bfin_return_from_exception); |
47 | 16 | ||
48 | /* Networking helper routines. */ | 17 | /* All the Blackfin cache functions: mach-common/cache.S */ |
49 | EXPORT_SYMBOL(csum_partial_copy); | 18 | EXPORT_SYMBOL(blackfin_dcache_invalidate_range); |
19 | EXPORT_SYMBOL(blackfin_icache_dcache_flush_range); | ||
20 | EXPORT_SYMBOL(blackfin_icache_flush_range); | ||
21 | EXPORT_SYMBOL(blackfin_dcache_flush_range); | ||
22 | EXPORT_SYMBOL(blackfin_dflush_page); | ||
50 | 23 | ||
51 | /* The following are special because they're not called | 24 | /* The following are special because they're not called |
52 | * explicitly (the C compiler generates them). Fortunately, | 25 | * explicitly (the C compiler generates them). Fortunately, |
@@ -74,8 +47,6 @@ extern void __modsi3(void); | |||
74 | extern void __muldi3(void); | 47 | extern void __muldi3(void); |
75 | extern void __udivsi3(void); | 48 | extern void __udivsi3(void); |
76 | extern void __umodsi3(void); | 49 | extern void __umodsi3(void); |
77 | |||
78 | /* gcc lib functions */ | ||
79 | EXPORT_SYMBOL(__ashldi3); | 50 | EXPORT_SYMBOL(__ashldi3); |
80 | EXPORT_SYMBOL(__ashrdi3); | 51 | EXPORT_SYMBOL(__ashrdi3); |
81 | EXPORT_SYMBOL(__umulsi3_highpart); | 52 | EXPORT_SYMBOL(__umulsi3_highpart); |
@@ -87,6 +58,7 @@ EXPORT_SYMBOL(__muldi3); | |||
87 | EXPORT_SYMBOL(__udivsi3); | 58 | EXPORT_SYMBOL(__udivsi3); |
88 | EXPORT_SYMBOL(__umodsi3); | 59 | EXPORT_SYMBOL(__umodsi3); |
89 | 60 | ||
61 | /* Input/output symbols: lib/{in,out}s.S */ | ||
90 | EXPORT_SYMBOL(outsb); | 62 | EXPORT_SYMBOL(outsb); |
91 | EXPORT_SYMBOL(insb); | 63 | EXPORT_SYMBOL(insb); |
92 | EXPORT_SYMBOL(outsw); | 64 | EXPORT_SYMBOL(outsw); |
@@ -96,20 +68,39 @@ EXPORT_SYMBOL(insw_8); | |||
96 | EXPORT_SYMBOL(outsl); | 68 | EXPORT_SYMBOL(outsl); |
97 | EXPORT_SYMBOL(insl); | 69 | EXPORT_SYMBOL(insl); |
98 | EXPORT_SYMBOL(insl_16); | 70 | EXPORT_SYMBOL(insl_16); |
99 | EXPORT_SYMBOL(irq_flags); | ||
100 | EXPORT_SYMBOL(iounmap); | ||
101 | EXPORT_SYMBOL(blackfin_dcache_invalidate_range); | ||
102 | EXPORT_SYMBOL(blackfin_icache_dcache_flush_range); | ||
103 | EXPORT_SYMBOL(blackfin_icache_flush_range); | ||
104 | EXPORT_SYMBOL(blackfin_dcache_flush_range); | ||
105 | EXPORT_SYMBOL(blackfin_dflush_page); | ||
106 | 71 | ||
107 | EXPORT_SYMBOL(csum_partial); | 72 | #ifdef CONFIG_SMP |
108 | EXPORT_SYMBOL(__init_begin); | 73 | EXPORT_SYMBOL(__raw_atomic_update_asm); |
109 | EXPORT_SYMBOL(__init_end); | 74 | EXPORT_SYMBOL(__raw_atomic_clear_asm); |
110 | EXPORT_SYMBOL(_ebss_l1); | 75 | EXPORT_SYMBOL(__raw_atomic_set_asm); |
111 | EXPORT_SYMBOL(_stext_l1); | 76 | EXPORT_SYMBOL(__raw_atomic_xor_asm); |
112 | EXPORT_SYMBOL(_etext_l1); | 77 | EXPORT_SYMBOL(__raw_atomic_test_asm); |
113 | EXPORT_SYMBOL(_sdata_l1); | 78 | EXPORT_SYMBOL(__raw_xchg_1_asm); |
114 | EXPORT_SYMBOL(_ebss_b_l1); | 79 | EXPORT_SYMBOL(__raw_xchg_2_asm); |
115 | EXPORT_SYMBOL(_sdata_b_l1); | 80 | EXPORT_SYMBOL(__raw_xchg_4_asm); |
81 | EXPORT_SYMBOL(__raw_cmpxchg_1_asm); | ||
82 | EXPORT_SYMBOL(__raw_cmpxchg_2_asm); | ||
83 | EXPORT_SYMBOL(__raw_cmpxchg_4_asm); | ||
84 | EXPORT_SYMBOL(__raw_spin_is_locked_asm); | ||
85 | EXPORT_SYMBOL(__raw_spin_lock_asm); | ||
86 | EXPORT_SYMBOL(__raw_spin_trylock_asm); | ||
87 | EXPORT_SYMBOL(__raw_spin_unlock_asm); | ||
88 | EXPORT_SYMBOL(__raw_read_lock_asm); | ||
89 | EXPORT_SYMBOL(__raw_read_trylock_asm); | ||
90 | EXPORT_SYMBOL(__raw_read_unlock_asm); | ||
91 | EXPORT_SYMBOL(__raw_write_lock_asm); | ||
92 | EXPORT_SYMBOL(__raw_write_trylock_asm); | ||
93 | EXPORT_SYMBOL(__raw_write_unlock_asm); | ||
94 | EXPORT_SYMBOL(__raw_bit_set_asm); | ||
95 | EXPORT_SYMBOL(__raw_bit_clear_asm); | ||
96 | EXPORT_SYMBOL(__raw_bit_toggle_asm); | ||
97 | EXPORT_SYMBOL(__raw_bit_test_asm); | ||
98 | EXPORT_SYMBOL(__raw_bit_test_set_asm); | ||
99 | EXPORT_SYMBOL(__raw_bit_test_clear_asm); | ||
100 | EXPORT_SYMBOL(__raw_bit_test_toggle_asm); | ||
101 | EXPORT_SYMBOL(__raw_uncached_fetch_asm); | ||
102 | #ifdef __ARCH_SYNC_CORE_DCACHE | ||
103 | EXPORT_SYMBOL(__raw_smp_mark_barrier_asm); | ||
104 | EXPORT_SYMBOL(__raw_smp_check_barrier_asm); | ||
105 | #endif | ||
106 | #endif | ||
diff --git a/arch/blackfin/kernel/cplb-mpu/Makefile b/arch/blackfin/kernel/cplb-mpu/Makefile index 286b69357f97..7d70d3bf3212 100644 --- a/arch/blackfin/kernel/cplb-mpu/Makefile +++ b/arch/blackfin/kernel/cplb-mpu/Makefile | |||
@@ -4,5 +4,7 @@ | |||
4 | 4 | ||
5 | obj-y := cplbinit.o cacheinit.o cplbmgr.o | 5 | obj-y := cplbinit.o cacheinit.o cplbmgr.o |
6 | 6 | ||
7 | obj-$(CONFIG_CPLB_INFO) += cplbinfo.o | 7 | CFLAGS_cplbmgr.o := -ffixed-I0 -ffixed-I1 -ffixed-I2 -ffixed-I3 \ |
8 | 8 | -ffixed-L0 -ffixed-L1 -ffixed-L2 -ffixed-L3 \ | |
9 | -ffixed-M0 -ffixed-M1 -ffixed-M2 -ffixed-M3 \ | ||
10 | -ffixed-B0 -ffixed-B1 -ffixed-B2 -ffixed-B3 | ||
diff --git a/arch/blackfin/kernel/cplb-mpu/cacheinit.c b/arch/blackfin/kernel/cplb-mpu/cacheinit.c index a8b712a24c59..c6ff947f9d37 100644 --- a/arch/blackfin/kernel/cplb-mpu/cacheinit.c +++ b/arch/blackfin/kernel/cplb-mpu/cacheinit.c | |||
@@ -25,7 +25,7 @@ | |||
25 | #include <asm/cplbinit.h> | 25 | #include <asm/cplbinit.h> |
26 | 26 | ||
27 | #if defined(CONFIG_BFIN_ICACHE) | 27 | #if defined(CONFIG_BFIN_ICACHE) |
28 | void __init bfin_icache_init(void) | 28 | void __cpuinit bfin_icache_init(struct cplb_entry *icplb_tbl) |
29 | { | 29 | { |
30 | unsigned long ctrl; | 30 | unsigned long ctrl; |
31 | int i; | 31 | int i; |
@@ -43,7 +43,7 @@ void __init bfin_icache_init(void) | |||
43 | #endif | 43 | #endif |
44 | 44 | ||
45 | #if defined(CONFIG_BFIN_DCACHE) | 45 | #if defined(CONFIG_BFIN_DCACHE) |
46 | void __init bfin_dcache_init(void) | 46 | void __cpuinit bfin_dcache_init(struct cplb_entry *dcplb_tbl) |
47 | { | 47 | { |
48 | unsigned long ctrl; | 48 | unsigned long ctrl; |
49 | int i; | 49 | int i; |
diff --git a/arch/blackfin/kernel/cplb-mpu/cplbinfo.c b/arch/blackfin/kernel/cplb-mpu/cplbinfo.c deleted file mode 100644 index 822beefa3a4b..000000000000 --- a/arch/blackfin/kernel/cplb-mpu/cplbinfo.c +++ /dev/null | |||
@@ -1,136 +0,0 @@ | |||
1 | /* | ||
2 | * File: arch/blackfin/mach-common/cplbinfo.c | ||
3 | * Based on: | ||
4 | * Author: Sonic Zhang <sonic.zhang@analog.com> | ||
5 | * | ||
6 | * Created: Jan. 2005 | ||
7 | * Description: Display CPLB status | ||
8 | * | ||
9 | * Modified: | ||
10 | * Copyright 2004-2006 Analog Devices Inc. | ||
11 | * | ||
12 | * Bugs: Enter bugs at http://blackfin.uclinux.org/ | ||
13 | * | ||
14 | * This program is free software; you can redistribute it and/or modify | ||
15 | * it under the terms of the GNU General Public License as published by | ||
16 | * the Free Software Foundation; either version 2 of the License, or | ||
17 | * (at your option) any later version. | ||
18 | * | ||
19 | * This program is distributed in the hope that it will be useful, | ||
20 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | ||
21 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | ||
22 | * GNU General Public License for more details. | ||
23 | * | ||
24 | * You should have received a copy of the GNU General Public License | ||
25 | * along with this program; if not, see the file COPYING, or write | ||
26 | * to the Free Software Foundation, Inc., | ||
27 | * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA | ||
28 | */ | ||
29 | |||
30 | #include <linux/module.h> | ||
31 | #include <linux/kernel.h> | ||
32 | #include <linux/init.h> | ||
33 | #include <linux/proc_fs.h> | ||
34 | #include <linux/uaccess.h> | ||
35 | |||
36 | #include <asm/current.h> | ||
37 | #include <asm/system.h> | ||
38 | #include <asm/cplb.h> | ||
39 | #include <asm/cplbinit.h> | ||
40 | #include <asm/blackfin.h> | ||
41 | |||
42 | static char page_size_string_table[][4] = { "1K", "4K", "1M", "4M" }; | ||
43 | |||
44 | static char *cplb_print_entry(char *buf, struct cplb_entry *tbl, int switched) | ||
45 | { | ||
46 | int i; | ||
47 | buf += sprintf(buf, "Index\tAddress\t\tData\tSize\tU/RD\tU/WR\tS/WR\tSwitch\n"); | ||
48 | for (i = 0; i < MAX_CPLBS; i++) { | ||
49 | unsigned long data = tbl[i].data; | ||
50 | unsigned long addr = tbl[i].addr; | ||
51 | if (!(data & CPLB_VALID)) | ||
52 | continue; | ||
53 | |||
54 | buf += | ||
55 | sprintf(buf, | ||
56 | "%d\t0x%08lx\t%06lx\t%s\t%c\t%c\t%c\t%c\n", | ||
57 | i, addr, data, | ||
58 | page_size_string_table[(data & 0x30000) >> 16], | ||
59 | (data & CPLB_USER_RD) ? 'Y' : 'N', | ||
60 | (data & CPLB_USER_WR) ? 'Y' : 'N', | ||
61 | (data & CPLB_SUPV_WR) ? 'Y' : 'N', | ||
62 | i < switched ? 'N' : 'Y'); | ||
63 | } | ||
64 | buf += sprintf(buf, "\n"); | ||
65 | |||
66 | return buf; | ||
67 | } | ||
68 | |||
69 | int cplbinfo_proc_output(char *buf) | ||
70 | { | ||
71 | char *p; | ||
72 | |||
73 | p = buf; | ||
74 | |||
75 | p += sprintf(p, "------------------ CPLB Information ------------------\n\n"); | ||
76 | |||
77 | if (bfin_read_IMEM_CONTROL() & ENICPLB) { | ||
78 | p += sprintf(p, "Instruction CPLB entry:\n"); | ||
79 | p = cplb_print_entry(p, icplb_tbl, first_switched_icplb); | ||
80 | } else | ||
81 | p += sprintf(p, "Instruction CPLB is disabled.\n\n"); | ||
82 | |||
83 | if (1 || bfin_read_DMEM_CONTROL() & ENDCPLB) { | ||
84 | p += sprintf(p, "Data CPLB entry:\n"); | ||
85 | p = cplb_print_entry(p, dcplb_tbl, first_switched_dcplb); | ||
86 | } else | ||
87 | p += sprintf(p, "Data CPLB is disabled.\n"); | ||
88 | |||
89 | p += sprintf(p, "ICPLB miss: %d\nICPLB supervisor miss: %d\n", | ||
90 | nr_icplb_miss, nr_icplb_supv_miss); | ||
91 | p += sprintf(p, "DCPLB miss: %d\nDCPLB protection fault:%d\n", | ||
92 | nr_dcplb_miss, nr_dcplb_prot); | ||
93 | p += sprintf(p, "CPLB flushes: %d\n", | ||
94 | nr_cplb_flush); | ||
95 | |||
96 | return p - buf; | ||
97 | } | ||
98 | |||
99 | static int cplbinfo_read_proc(char *page, char **start, off_t off, | ||
100 | int count, int *eof, void *data) | ||
101 | { | ||
102 | int len; | ||
103 | |||
104 | len = cplbinfo_proc_output(page); | ||
105 | if (len <= off + count) | ||
106 | *eof = 1; | ||
107 | *start = page + off; | ||
108 | len -= off; | ||
109 | if (len > count) | ||
110 | len = count; | ||
111 | if (len < 0) | ||
112 | len = 0; | ||
113 | return len; | ||
114 | } | ||
115 | |||
116 | static int __init cplbinfo_init(void) | ||
117 | { | ||
118 | struct proc_dir_entry *entry; | ||
119 | |||
120 | entry = create_proc_entry("cplbinfo", 0, NULL); | ||
121 | if (!entry) | ||
122 | return -ENOMEM; | ||
123 | |||
124 | entry->read_proc = cplbinfo_read_proc; | ||
125 | entry->data = NULL; | ||
126 | |||
127 | return 0; | ||
128 | } | ||
129 | |||
130 | static void __exit cplbinfo_exit(void) | ||
131 | { | ||
132 | remove_proc_entry("cplbinfo", NULL); | ||
133 | } | ||
134 | |||
135 | module_init(cplbinfo_init); | ||
136 | module_exit(cplbinfo_exit); | ||
diff --git a/arch/blackfin/kernel/cplb-mpu/cplbinit.c b/arch/blackfin/kernel/cplb-mpu/cplbinit.c index 55af729f8495..bdb958486e76 100644 --- a/arch/blackfin/kernel/cplb-mpu/cplbinit.c +++ b/arch/blackfin/kernel/cplb-mpu/cplbinit.c | |||
@@ -25,18 +25,19 @@ | |||
25 | #include <asm/blackfin.h> | 25 | #include <asm/blackfin.h> |
26 | #include <asm/cplb.h> | 26 | #include <asm/cplb.h> |
27 | #include <asm/cplbinit.h> | 27 | #include <asm/cplbinit.h> |
28 | #include <asm/mem_map.h> | ||
28 | 29 | ||
29 | #if ANOMALY_05000263 | 30 | #if ANOMALY_05000263 |
30 | # error the MPU will not function safely while Anomaly 05000263 applies | 31 | # error the MPU will not function safely while Anomaly 05000263 applies |
31 | #endif | 32 | #endif |
32 | 33 | ||
33 | struct cplb_entry icplb_tbl[MAX_CPLBS]; | 34 | struct cplb_entry icplb_tbl[NR_CPUS][MAX_CPLBS]; |
34 | struct cplb_entry dcplb_tbl[MAX_CPLBS]; | 35 | struct cplb_entry dcplb_tbl[NR_CPUS][MAX_CPLBS]; |
35 | 36 | ||
36 | int first_switched_icplb, first_switched_dcplb; | 37 | int first_switched_icplb, first_switched_dcplb; |
37 | int first_mask_dcplb; | 38 | int first_mask_dcplb; |
38 | 39 | ||
39 | void __init generate_cplb_tables(void) | 40 | void __init generate_cplb_tables_cpu(unsigned int cpu) |
40 | { | 41 | { |
41 | int i_d, i_i; | 42 | int i_d, i_i; |
42 | unsigned long addr; | 43 | unsigned long addr; |
@@ -55,15 +56,16 @@ void __init generate_cplb_tables(void) | |||
55 | d_cache |= CPLB_L1_AOW | CPLB_WT; | 56 | d_cache |= CPLB_L1_AOW | CPLB_WT; |
56 | #endif | 57 | #endif |
57 | #endif | 58 | #endif |
59 | |||
58 | i_d = i_i = 0; | 60 | i_d = i_i = 0; |
59 | 61 | ||
60 | /* Set up the zero page. */ | 62 | /* Set up the zero page. */ |
61 | dcplb_tbl[i_d].addr = 0; | 63 | dcplb_tbl[cpu][i_d].addr = 0; |
62 | dcplb_tbl[i_d++].data = SDRAM_OOPS | PAGE_SIZE_1KB; | 64 | dcplb_tbl[cpu][i_d++].data = SDRAM_OOPS | PAGE_SIZE_1KB; |
63 | 65 | ||
64 | #if 0 | 66 | #if 0 |
65 | icplb_tbl[i_i].addr = 0; | 67 | icplb_tbl[cpu][i_i].addr = 0; |
66 | icplb_tbl[i_i++].data = i_cache | CPLB_USER_RD | PAGE_SIZE_4KB; | 68 | icplb_tbl[cpu][i_i++].data = i_cache | CPLB_USER_RD | PAGE_SIZE_4KB; |
67 | #endif | 69 | #endif |
68 | 70 | ||
69 | /* Cover kernel memory with 4M pages. */ | 71 | /* Cover kernel memory with 4M pages. */ |
@@ -72,28 +74,28 @@ void __init generate_cplb_tables(void) | |||
72 | i_data = i_cache | CPLB_VALID | CPLB_PORTPRIO | PAGE_SIZE_4MB; | 74 | i_data = i_cache | CPLB_VALID | CPLB_PORTPRIO | PAGE_SIZE_4MB; |
73 | 75 | ||
74 | for (; addr < memory_start; addr += 4 * 1024 * 1024) { | 76 | for (; addr < memory_start; addr += 4 * 1024 * 1024) { |
75 | dcplb_tbl[i_d].addr = addr; | 77 | dcplb_tbl[cpu][i_d].addr = addr; |
76 | dcplb_tbl[i_d++].data = d_data; | 78 | dcplb_tbl[cpu][i_d++].data = d_data; |
77 | icplb_tbl[i_i].addr = addr; | 79 | icplb_tbl[cpu][i_i].addr = addr; |
78 | icplb_tbl[i_i++].data = i_data | (addr == 0 ? CPLB_USER_RD : 0); | 80 | icplb_tbl[cpu][i_i++].data = i_data | (addr == 0 ? CPLB_USER_RD : 0); |
79 | } | 81 | } |
80 | 82 | ||
81 | /* Cover L1 memory. One 4M area for code and data each is enough. */ | 83 | /* Cover L1 memory. One 4M area for code and data each is enough. */ |
82 | #if L1_DATA_A_LENGTH > 0 || L1_DATA_B_LENGTH > 0 | 84 | #if L1_DATA_A_LENGTH > 0 || L1_DATA_B_LENGTH > 0 |
83 | dcplb_tbl[i_d].addr = L1_DATA_A_START; | 85 | dcplb_tbl[cpu][i_d].addr = get_l1_data_a_start_cpu(cpu); |
84 | dcplb_tbl[i_d++].data = L1_DMEMORY | PAGE_SIZE_4MB; | 86 | dcplb_tbl[cpu][i_d++].data = L1_DMEMORY | PAGE_SIZE_4MB; |
85 | #endif | 87 | #endif |
86 | #if L1_CODE_LENGTH > 0 | 88 | #if L1_CODE_LENGTH > 0 |
87 | icplb_tbl[i_i].addr = L1_CODE_START; | 89 | icplb_tbl[cpu][i_i].addr = get_l1_code_start_cpu(cpu); |
88 | icplb_tbl[i_i++].data = L1_IMEMORY | PAGE_SIZE_4MB; | 90 | icplb_tbl[cpu][i_i++].data = L1_IMEMORY | PAGE_SIZE_4MB; |
89 | #endif | 91 | #endif |
90 | 92 | ||
91 | /* Cover L2 memory */ | 93 | /* Cover L2 memory */ |
92 | #if L2_LENGTH > 0 | 94 | #if L2_LENGTH > 0 |
93 | dcplb_tbl[i_d].addr = L2_START; | 95 | dcplb_tbl[cpu][i_d].addr = L2_START; |
94 | dcplb_tbl[i_d++].data = L2_DMEMORY | PAGE_SIZE_1MB; | 96 | dcplb_tbl[cpu][i_d++].data = L2_DMEMORY | PAGE_SIZE_1MB; |
95 | icplb_tbl[i_i].addr = L2_START; | 97 | icplb_tbl[cpu][i_i].addr = L2_START; |
96 | icplb_tbl[i_i++].data = L2_IMEMORY | PAGE_SIZE_1MB; | 98 | icplb_tbl[cpu][i_i++].data = L2_IMEMORY | PAGE_SIZE_1MB; |
97 | #endif | 99 | #endif |
98 | 100 | ||
99 | first_mask_dcplb = i_d; | 101 | first_mask_dcplb = i_d; |
@@ -101,7 +103,11 @@ void __init generate_cplb_tables(void) | |||
101 | first_switched_icplb = i_i; | 103 | first_switched_icplb = i_i; |
102 | 104 | ||
103 | while (i_d < MAX_CPLBS) | 105 | while (i_d < MAX_CPLBS) |
104 | dcplb_tbl[i_d++].data = 0; | 106 | dcplb_tbl[cpu][i_d++].data = 0; |
105 | while (i_i < MAX_CPLBS) | 107 | while (i_i < MAX_CPLBS) |
106 | icplb_tbl[i_i++].data = 0; | 108 | icplb_tbl[cpu][i_i++].data = 0; |
109 | } | ||
110 | |||
111 | void generate_cplb_tables_all(void) | ||
112 | { | ||
107 | } | 113 | } |
diff --git a/arch/blackfin/kernel/cplb-mpu/cplbmgr.c b/arch/blackfin/kernel/cplb-mpu/cplbmgr.c index baa52e261f0d..87463ce87f5a 100644 --- a/arch/blackfin/kernel/cplb-mpu/cplbmgr.c +++ b/arch/blackfin/kernel/cplb-mpu/cplbmgr.c | |||
@@ -25,15 +25,21 @@ | |||
25 | #include <asm/cplbinit.h> | 25 | #include <asm/cplbinit.h> |
26 | #include <asm/mmu_context.h> | 26 | #include <asm/mmu_context.h> |
27 | 27 | ||
28 | #define FAULT_RW (1 << 16) | 28 | /* |
29 | #define FAULT_USERSUPV (1 << 17) | 29 | * WARNING |
30 | * | ||
31 | * This file is compiled with certain -ffixed-reg options. We have to | ||
32 | * make sure not to call any functions here that could clobber these | ||
33 | * registers. | ||
34 | */ | ||
30 | 35 | ||
31 | int page_mask_nelts; | 36 | int page_mask_nelts; |
32 | int page_mask_order; | 37 | int page_mask_order; |
33 | unsigned long *current_rwx_mask; | 38 | unsigned long *current_rwx_mask[NR_CPUS]; |
34 | 39 | ||
35 | int nr_dcplb_miss, nr_icplb_miss, nr_icplb_supv_miss, nr_dcplb_prot; | 40 | int nr_dcplb_miss[NR_CPUS], nr_icplb_miss[NR_CPUS]; |
36 | int nr_cplb_flush; | 41 | int nr_icplb_supv_miss[NR_CPUS], nr_dcplb_prot[NR_CPUS]; |
42 | int nr_cplb_flush[NR_CPUS]; | ||
37 | 43 | ||
38 | static inline void disable_dcplb(void) | 44 | static inline void disable_dcplb(void) |
39 | { | 45 | { |
@@ -98,42 +104,42 @@ static inline int write_permitted(int status, unsigned long data) | |||
98 | } | 104 | } |
99 | 105 | ||
100 | /* Counters to implement round-robin replacement. */ | 106 | /* Counters to implement round-robin replacement. */ |
101 | static int icplb_rr_index, dcplb_rr_index; | 107 | static int icplb_rr_index[NR_CPUS], dcplb_rr_index[NR_CPUS]; |
102 | 108 | ||
103 | /* | 109 | /* |
104 | * Find an ICPLB entry to be evicted and return its index. | 110 | * Find an ICPLB entry to be evicted and return its index. |
105 | */ | 111 | */ |
106 | static int evict_one_icplb(void) | 112 | static int evict_one_icplb(unsigned int cpu) |
107 | { | 113 | { |
108 | int i; | 114 | int i; |
109 | for (i = first_switched_icplb; i < MAX_CPLBS; i++) | 115 | for (i = first_switched_icplb; i < MAX_CPLBS; i++) |
110 | if ((icplb_tbl[i].data & CPLB_VALID) == 0) | 116 | if ((icplb_tbl[cpu][i].data & CPLB_VALID) == 0) |
111 | return i; | 117 | return i; |
112 | i = first_switched_icplb + icplb_rr_index; | 118 | i = first_switched_icplb + icplb_rr_index[cpu]; |
113 | if (i >= MAX_CPLBS) { | 119 | if (i >= MAX_CPLBS) { |
114 | i -= MAX_CPLBS - first_switched_icplb; | 120 | i -= MAX_CPLBS - first_switched_icplb; |
115 | icplb_rr_index -= MAX_CPLBS - first_switched_icplb; | 121 | icplb_rr_index[cpu] -= MAX_CPLBS - first_switched_icplb; |
116 | } | 122 | } |
117 | icplb_rr_index++; | 123 | icplb_rr_index[cpu]++; |
118 | return i; | 124 | return i; |
119 | } | 125 | } |
120 | 126 | ||
121 | static int evict_one_dcplb(void) | 127 | static int evict_one_dcplb(unsigned int cpu) |
122 | { | 128 | { |
123 | int i; | 129 | int i; |
124 | for (i = first_switched_dcplb; i < MAX_CPLBS; i++) | 130 | for (i = first_switched_dcplb; i < MAX_CPLBS; i++) |
125 | if ((dcplb_tbl[i].data & CPLB_VALID) == 0) | 131 | if ((dcplb_tbl[cpu][i].data & CPLB_VALID) == 0) |
126 | return i; | 132 | return i; |
127 | i = first_switched_dcplb + dcplb_rr_index; | 133 | i = first_switched_dcplb + dcplb_rr_index[cpu]; |
128 | if (i >= MAX_CPLBS) { | 134 | if (i >= MAX_CPLBS) { |
129 | i -= MAX_CPLBS - first_switched_dcplb; | 135 | i -= MAX_CPLBS - first_switched_dcplb; |
130 | dcplb_rr_index -= MAX_CPLBS - first_switched_dcplb; | 136 | dcplb_rr_index[cpu] -= MAX_CPLBS - first_switched_dcplb; |
131 | } | 137 | } |
132 | dcplb_rr_index++; | 138 | dcplb_rr_index[cpu]++; |
133 | return i; | 139 | return i; |
134 | } | 140 | } |
135 | 141 | ||
136 | static noinline int dcplb_miss(void) | 142 | static noinline int dcplb_miss(unsigned int cpu) |
137 | { | 143 | { |
138 | unsigned long addr = bfin_read_DCPLB_FAULT_ADDR(); | 144 | unsigned long addr = bfin_read_DCPLB_FAULT_ADDR(); |
139 | int status = bfin_read_DCPLB_STATUS(); | 145 | int status = bfin_read_DCPLB_STATUS(); |
@@ -141,7 +147,7 @@ static noinline int dcplb_miss(void) | |||
141 | int idx; | 147 | int idx; |
142 | unsigned long d_data; | 148 | unsigned long d_data; |
143 | 149 | ||
144 | nr_dcplb_miss++; | 150 | nr_dcplb_miss[cpu]++; |
145 | 151 | ||
146 | d_data = CPLB_SUPV_WR | CPLB_VALID | CPLB_DIRTY | PAGE_SIZE_4KB; | 152 | d_data = CPLB_SUPV_WR | CPLB_VALID | CPLB_DIRTY | PAGE_SIZE_4KB; |
147 | #ifdef CONFIG_BFIN_DCACHE | 153 | #ifdef CONFIG_BFIN_DCACHE |
@@ -168,25 +174,25 @@ static noinline int dcplb_miss(void) | |||
168 | } else if (addr >= _ramend) { | 174 | } else if (addr >= _ramend) { |
169 | d_data |= CPLB_USER_RD | CPLB_USER_WR; | 175 | d_data |= CPLB_USER_RD | CPLB_USER_WR; |
170 | } else { | 176 | } else { |
171 | mask = current_rwx_mask; | 177 | mask = current_rwx_mask[cpu]; |
172 | if (mask) { | 178 | if (mask) { |
173 | int page = addr >> PAGE_SHIFT; | 179 | int page = addr >> PAGE_SHIFT; |
174 | int offs = page >> 5; | 180 | int idx = page >> 5; |
175 | int bit = 1 << (page & 31); | 181 | int bit = 1 << (page & 31); |
176 | 182 | ||
177 | if (mask[offs] & bit) | 183 | if (mask[idx] & bit) |
178 | d_data |= CPLB_USER_RD; | 184 | d_data |= CPLB_USER_RD; |
179 | 185 | ||
180 | mask += page_mask_nelts; | 186 | mask += page_mask_nelts; |
181 | if (mask[offs] & bit) | 187 | if (mask[idx] & bit) |
182 | d_data |= CPLB_USER_WR; | 188 | d_data |= CPLB_USER_WR; |
183 | } | 189 | } |
184 | } | 190 | } |
185 | idx = evict_one_dcplb(); | 191 | idx = evict_one_dcplb(cpu); |
186 | 192 | ||
187 | addr &= PAGE_MASK; | 193 | addr &= PAGE_MASK; |
188 | dcplb_tbl[idx].addr = addr; | 194 | dcplb_tbl[cpu][idx].addr = addr; |
189 | dcplb_tbl[idx].data = d_data; | 195 | dcplb_tbl[cpu][idx].data = d_data; |
190 | 196 | ||
191 | disable_dcplb(); | 197 | disable_dcplb(); |
192 | bfin_write32(DCPLB_DATA0 + idx * 4, d_data); | 198 | bfin_write32(DCPLB_DATA0 + idx * 4, d_data); |
@@ -196,21 +202,21 @@ static noinline int dcplb_miss(void) | |||
196 | return 0; | 202 | return 0; |
197 | } | 203 | } |
198 | 204 | ||
199 | static noinline int icplb_miss(void) | 205 | static noinline int icplb_miss(unsigned int cpu) |
200 | { | 206 | { |
201 | unsigned long addr = bfin_read_ICPLB_FAULT_ADDR(); | 207 | unsigned long addr = bfin_read_ICPLB_FAULT_ADDR(); |
202 | int status = bfin_read_ICPLB_STATUS(); | 208 | int status = bfin_read_ICPLB_STATUS(); |
203 | int idx; | 209 | int idx; |
204 | unsigned long i_data; | 210 | unsigned long i_data; |
205 | 211 | ||
206 | nr_icplb_miss++; | 212 | nr_icplb_miss[cpu]++; |
207 | 213 | ||
208 | /* If inside the uncached DMA region, fault. */ | 214 | /* If inside the uncached DMA region, fault. */ |
209 | if (addr >= _ramend - DMA_UNCACHED_REGION && addr < _ramend) | 215 | if (addr >= _ramend - DMA_UNCACHED_REGION && addr < _ramend) |
210 | return CPLB_PROT_VIOL; | 216 | return CPLB_PROT_VIOL; |
211 | 217 | ||
212 | if (status & FAULT_USERSUPV) | 218 | if (status & FAULT_USERSUPV) |
213 | nr_icplb_supv_miss++; | 219 | nr_icplb_supv_miss[cpu]++; |
214 | 220 | ||
215 | /* | 221 | /* |
216 | * First, try to find a CPLB that matches this address. If we | 222 | * First, try to find a CPLB that matches this address. If we |
@@ -218,8 +224,8 @@ static noinline int icplb_miss(void) | |||
218 | * that the instruction crosses a page boundary. | 224 | * that the instruction crosses a page boundary. |
219 | */ | 225 | */ |
220 | for (idx = first_switched_icplb; idx < MAX_CPLBS; idx++) { | 226 | for (idx = first_switched_icplb; idx < MAX_CPLBS; idx++) { |
221 | if (icplb_tbl[idx].data & CPLB_VALID) { | 227 | if (icplb_tbl[cpu][idx].data & CPLB_VALID) { |
222 | unsigned long this_addr = icplb_tbl[idx].addr; | 228 | unsigned long this_addr = icplb_tbl[cpu][idx].addr; |
223 | if (this_addr <= addr && this_addr + PAGE_SIZE > addr) { | 229 | if (this_addr <= addr && this_addr + PAGE_SIZE > addr) { |
224 | addr += PAGE_SIZE; | 230 | addr += PAGE_SIZE; |
225 | break; | 231 | break; |
@@ -257,23 +263,23 @@ static noinline int icplb_miss(void) | |||
257 | * Otherwise, check the x bitmap of the current process. | 263 | * Otherwise, check the x bitmap of the current process. |
258 | */ | 264 | */ |
259 | if (!(status & FAULT_USERSUPV)) { | 265 | if (!(status & FAULT_USERSUPV)) { |
260 | unsigned long *mask = current_rwx_mask; | 266 | unsigned long *mask = current_rwx_mask[cpu]; |
261 | 267 | ||
262 | if (mask) { | 268 | if (mask) { |
263 | int page = addr >> PAGE_SHIFT; | 269 | int page = addr >> PAGE_SHIFT; |
264 | int offs = page >> 5; | 270 | int idx = page >> 5; |
265 | int bit = 1 << (page & 31); | 271 | int bit = 1 << (page & 31); |
266 | 272 | ||
267 | mask += 2 * page_mask_nelts; | 273 | mask += 2 * page_mask_nelts; |
268 | if (mask[offs] & bit) | 274 | if (mask[idx] & bit) |
269 | i_data |= CPLB_USER_RD; | 275 | i_data |= CPLB_USER_RD; |
270 | } | 276 | } |
271 | } | 277 | } |
272 | } | 278 | } |
273 | idx = evict_one_icplb(); | 279 | idx = evict_one_icplb(cpu); |
274 | addr &= PAGE_MASK; | 280 | addr &= PAGE_MASK; |
275 | icplb_tbl[idx].addr = addr; | 281 | icplb_tbl[cpu][idx].addr = addr; |
276 | icplb_tbl[idx].data = i_data; | 282 | icplb_tbl[cpu][idx].data = i_data; |
277 | 283 | ||
278 | disable_icplb(); | 284 | disable_icplb(); |
279 | bfin_write32(ICPLB_DATA0 + idx * 4, i_data); | 285 | bfin_write32(ICPLB_DATA0 + idx * 4, i_data); |
@@ -283,19 +289,19 @@ static noinline int icplb_miss(void) | |||
283 | return 0; | 289 | return 0; |
284 | } | 290 | } |
285 | 291 | ||
286 | static noinline int dcplb_protection_fault(void) | 292 | static noinline int dcplb_protection_fault(unsigned int cpu) |
287 | { | 293 | { |
288 | int status = bfin_read_DCPLB_STATUS(); | 294 | int status = bfin_read_DCPLB_STATUS(); |
289 | 295 | ||
290 | nr_dcplb_prot++; | 296 | nr_dcplb_prot[cpu]++; |
291 | 297 | ||
292 | if (status & FAULT_RW) { | 298 | if (status & FAULT_RW) { |
293 | int idx = faulting_cplb_index(status); | 299 | int idx = faulting_cplb_index(status); |
294 | unsigned long data = dcplb_tbl[idx].data; | 300 | unsigned long data = dcplb_tbl[cpu][idx].data; |
295 | if (!(data & CPLB_WT) && !(data & CPLB_DIRTY) && | 301 | if (!(data & CPLB_WT) && !(data & CPLB_DIRTY) && |
296 | write_permitted(status, data)) { | 302 | write_permitted(status, data)) { |
297 | data |= CPLB_DIRTY; | 303 | data |= CPLB_DIRTY; |
298 | dcplb_tbl[idx].data = data; | 304 | dcplb_tbl[cpu][idx].data = data; |
299 | bfin_write32(DCPLB_DATA0 + idx * 4, data); | 305 | bfin_write32(DCPLB_DATA0 + idx * 4, data); |
300 | return 0; | 306 | return 0; |
301 | } | 307 | } |
@@ -306,44 +312,45 @@ static noinline int dcplb_protection_fault(void) | |||
306 | int cplb_hdr(int seqstat, struct pt_regs *regs) | 312 | int cplb_hdr(int seqstat, struct pt_regs *regs) |
307 | { | 313 | { |
308 | int cause = seqstat & 0x3f; | 314 | int cause = seqstat & 0x3f; |
315 | unsigned int cpu = smp_processor_id(); | ||
309 | switch (cause) { | 316 | switch (cause) { |
310 | case 0x23: | 317 | case 0x23: |
311 | return dcplb_protection_fault(); | 318 | return dcplb_protection_fault(cpu); |
312 | case 0x2C: | 319 | case 0x2C: |
313 | return icplb_miss(); | 320 | return icplb_miss(cpu); |
314 | case 0x26: | 321 | case 0x26: |
315 | return dcplb_miss(); | 322 | return dcplb_miss(cpu); |
316 | default: | 323 | default: |
317 | return 1; | 324 | return 1; |
318 | } | 325 | } |
319 | } | 326 | } |
320 | 327 | ||
321 | void flush_switched_cplbs(void) | 328 | void flush_switched_cplbs(unsigned int cpu) |
322 | { | 329 | { |
323 | int i; | 330 | int i; |
324 | unsigned long flags; | 331 | unsigned long flags; |
325 | 332 | ||
326 | nr_cplb_flush++; | 333 | nr_cplb_flush[cpu]++; |
327 | 334 | ||
328 | local_irq_save(flags); | 335 | local_irq_save_hw(flags); |
329 | disable_icplb(); | 336 | disable_icplb(); |
330 | for (i = first_switched_icplb; i < MAX_CPLBS; i++) { | 337 | for (i = first_switched_icplb; i < MAX_CPLBS; i++) { |
331 | icplb_tbl[i].data = 0; | 338 | icplb_tbl[cpu][i].data = 0; |
332 | bfin_write32(ICPLB_DATA0 + i * 4, 0); | 339 | bfin_write32(ICPLB_DATA0 + i * 4, 0); |
333 | } | 340 | } |
334 | enable_icplb(); | 341 | enable_icplb(); |
335 | 342 | ||
336 | disable_dcplb(); | 343 | disable_dcplb(); |
337 | for (i = first_switched_dcplb; i < MAX_CPLBS; i++) { | 344 | for (i = first_switched_dcplb; i < MAX_CPLBS; i++) { |
338 | dcplb_tbl[i].data = 0; | 345 | dcplb_tbl[cpu][i].data = 0; |
339 | bfin_write32(DCPLB_DATA0 + i * 4, 0); | 346 | bfin_write32(DCPLB_DATA0 + i * 4, 0); |
340 | } | 347 | } |
341 | enable_dcplb(); | 348 | enable_dcplb(); |
342 | local_irq_restore(flags); | 349 | local_irq_restore_hw(flags); |
343 | 350 | ||
344 | } | 351 | } |
345 | 352 | ||
346 | void set_mask_dcplbs(unsigned long *masks) | 353 | void set_mask_dcplbs(unsigned long *masks, unsigned int cpu) |
347 | { | 354 | { |
348 | int i; | 355 | int i; |
349 | unsigned long addr = (unsigned long)masks; | 356 | unsigned long addr = (unsigned long)masks; |
@@ -351,12 +358,12 @@ void set_mask_dcplbs(unsigned long *masks) | |||
351 | unsigned long flags; | 358 | unsigned long flags; |
352 | 359 | ||
353 | if (!masks) { | 360 | if (!masks) { |
354 | current_rwx_mask = masks; | 361 | current_rwx_mask[cpu] = masks; |
355 | return; | 362 | return; |
356 | } | 363 | } |
357 | 364 | ||
358 | local_irq_save(flags); | 365 | local_irq_save_hw(flags); |
359 | current_rwx_mask = masks; | 366 | current_rwx_mask[cpu] = masks; |
360 | 367 | ||
361 | d_data = CPLB_SUPV_WR | CPLB_VALID | CPLB_DIRTY | PAGE_SIZE_4KB; | 368 | d_data = CPLB_SUPV_WR | CPLB_VALID | CPLB_DIRTY | PAGE_SIZE_4KB; |
362 | #ifdef CONFIG_BFIN_DCACHE | 369 | #ifdef CONFIG_BFIN_DCACHE |
@@ -368,12 +375,12 @@ void set_mask_dcplbs(unsigned long *masks) | |||
368 | 375 | ||
369 | disable_dcplb(); | 376 | disable_dcplb(); |
370 | for (i = first_mask_dcplb; i < first_switched_dcplb; i++) { | 377 | for (i = first_mask_dcplb; i < first_switched_dcplb; i++) { |
371 | dcplb_tbl[i].addr = addr; | 378 | dcplb_tbl[cpu][i].addr = addr; |
372 | dcplb_tbl[i].data = d_data; | 379 | dcplb_tbl[cpu][i].data = d_data; |
373 | bfin_write32(DCPLB_DATA0 + i * 4, d_data); | 380 | bfin_write32(DCPLB_DATA0 + i * 4, d_data); |
374 | bfin_write32(DCPLB_ADDR0 + i * 4, addr); | 381 | bfin_write32(DCPLB_ADDR0 + i * 4, addr); |
375 | addr += PAGE_SIZE; | 382 | addr += PAGE_SIZE; |
376 | } | 383 | } |
377 | enable_dcplb(); | 384 | enable_dcplb(); |
378 | local_irq_restore(flags); | 385 | local_irq_restore_hw(flags); |
379 | } | 386 | } |
diff --git a/arch/blackfin/kernel/cplb-nompu/Makefile b/arch/blackfin/kernel/cplb-nompu/Makefile index d36ea9b5382e..7d70d3bf3212 100644 --- a/arch/blackfin/kernel/cplb-nompu/Makefile +++ b/arch/blackfin/kernel/cplb-nompu/Makefile | |||
@@ -2,7 +2,9 @@ | |||
2 | # arch/blackfin/kernel/cplb-nompu/Makefile | 2 | # arch/blackfin/kernel/cplb-nompu/Makefile |
3 | # | 3 | # |
4 | 4 | ||
5 | obj-y := cplbinit.o cacheinit.o cplbhdlr.o cplbmgr.o | 5 | obj-y := cplbinit.o cacheinit.o cplbmgr.o |
6 | |||
7 | obj-$(CONFIG_CPLB_INFO) += cplbinfo.o | ||
8 | 6 | ||
7 | CFLAGS_cplbmgr.o := -ffixed-I0 -ffixed-I1 -ffixed-I2 -ffixed-I3 \ | ||
8 | -ffixed-L0 -ffixed-L1 -ffixed-L2 -ffixed-L3 \ | ||
9 | -ffixed-M0 -ffixed-M1 -ffixed-M2 -ffixed-M3 \ | ||
10 | -ffixed-B0 -ffixed-B1 -ffixed-B2 -ffixed-B3 | ||
diff --git a/arch/blackfin/kernel/cplb-nompu/cacheinit.c b/arch/blackfin/kernel/cplb-nompu/cacheinit.c index bd0831592c2c..c6ff947f9d37 100644 --- a/arch/blackfin/kernel/cplb-nompu/cacheinit.c +++ b/arch/blackfin/kernel/cplb-nompu/cacheinit.c | |||
@@ -25,19 +25,15 @@ | |||
25 | #include <asm/cplbinit.h> | 25 | #include <asm/cplbinit.h> |
26 | 26 | ||
27 | #if defined(CONFIG_BFIN_ICACHE) | 27 | #if defined(CONFIG_BFIN_ICACHE) |
28 | void __init bfin_icache_init(void) | 28 | void __cpuinit bfin_icache_init(struct cplb_entry *icplb_tbl) |
29 | { | 29 | { |
30 | unsigned long *table = icplb_table; | ||
31 | unsigned long ctrl; | 30 | unsigned long ctrl; |
32 | int i; | 31 | int i; |
33 | 32 | ||
33 | SSYNC(); | ||
34 | for (i = 0; i < MAX_CPLBS; i++) { | 34 | for (i = 0; i < MAX_CPLBS; i++) { |
35 | unsigned long addr = *table++; | 35 | bfin_write32(ICPLB_ADDR0 + i * 4, icplb_tbl[i].addr); |
36 | unsigned long data = *table++; | 36 | bfin_write32(ICPLB_DATA0 + i * 4, icplb_tbl[i].data); |
37 | if (addr == (unsigned long)-1) | ||
38 | break; | ||
39 | bfin_write32(ICPLB_ADDR0 + i * 4, addr); | ||
40 | bfin_write32(ICPLB_DATA0 + i * 4, data); | ||
41 | } | 37 | } |
42 | ctrl = bfin_read_IMEM_CONTROL(); | 38 | ctrl = bfin_read_IMEM_CONTROL(); |
43 | ctrl |= IMC | ENICPLB; | 39 | ctrl |= IMC | ENICPLB; |
@@ -47,20 +43,17 @@ void __init bfin_icache_init(void) | |||
47 | #endif | 43 | #endif |
48 | 44 | ||
49 | #if defined(CONFIG_BFIN_DCACHE) | 45 | #if defined(CONFIG_BFIN_DCACHE) |
50 | void __init bfin_dcache_init(void) | 46 | void __cpuinit bfin_dcache_init(struct cplb_entry *dcplb_tbl) |
51 | { | 47 | { |
52 | unsigned long *table = dcplb_table; | ||
53 | unsigned long ctrl; | 48 | unsigned long ctrl; |
54 | int i; | 49 | int i; |
55 | 50 | ||
51 | SSYNC(); | ||
56 | for (i = 0; i < MAX_CPLBS; i++) { | 52 | for (i = 0; i < MAX_CPLBS; i++) { |
57 | unsigned long addr = *table++; | 53 | bfin_write32(DCPLB_ADDR0 + i * 4, dcplb_tbl[i].addr); |
58 | unsigned long data = *table++; | 54 | bfin_write32(DCPLB_DATA0 + i * 4, dcplb_tbl[i].data); |
59 | if (addr == (unsigned long)-1) | ||
60 | break; | ||
61 | bfin_write32(DCPLB_ADDR0 + i * 4, addr); | ||
62 | bfin_write32(DCPLB_DATA0 + i * 4, data); | ||
63 | } | 55 | } |
56 | |||
64 | ctrl = bfin_read_DMEM_CONTROL(); | 57 | ctrl = bfin_read_DMEM_CONTROL(); |
65 | ctrl |= DMEM_CNTR; | 58 | ctrl |= DMEM_CNTR; |
66 | bfin_write_DMEM_CONTROL(ctrl); | 59 | bfin_write_DMEM_CONTROL(ctrl); |
diff --git a/arch/blackfin/kernel/cplb-nompu/cplbhdlr.S b/arch/blackfin/kernel/cplb-nompu/cplbhdlr.S deleted file mode 100644 index ecbabc0a1fed..000000000000 --- a/arch/blackfin/kernel/cplb-nompu/cplbhdlr.S +++ /dev/null | |||
@@ -1,130 +0,0 @@ | |||
1 | /* | ||
2 | * File: arch/blackfin/mach-common/cplbhdlr.S | ||
3 | * Based on: | ||
4 | * Author: LG Soft India | ||
5 | * | ||
6 | * Created: ? | ||
7 | * Description: CPLB exception handler | ||
8 | * | ||
9 | * Modified: | ||
10 | * Copyright 2004-2006 Analog Devices Inc. | ||
11 | * | ||
12 | * Bugs: Enter bugs at http://blackfin.uclinux.org/ | ||
13 | * | ||
14 | * This program is free software; you can redistribute it and/or modify | ||
15 | * it under the terms of the GNU General Public License as published by | ||
16 | * the Free Software Foundation; either version 2 of the License, or | ||
17 | * (at your option) any later version. | ||
18 | * | ||
19 | * This program is distributed in the hope that it will be useful, | ||
20 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | ||
21 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | ||
22 | * GNU General Public License for more details. | ||
23 | * | ||
24 | * You should have received a copy of the GNU General Public License | ||
25 | * along with this program; if not, see the file COPYING, or write | ||
26 | * to the Free Software Foundation, Inc., | ||
27 | * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA | ||
28 | */ | ||
29 | |||
30 | #include <linux/linkage.h> | ||
31 | #include <asm/cplb.h> | ||
32 | #include <asm/entry.h> | ||
33 | |||
34 | #ifdef CONFIG_EXCPT_IRQ_SYSC_L1 | ||
35 | .section .l1.text | ||
36 | #else | ||
37 | .text | ||
38 | #endif | ||
39 | |||
40 | .type _cplb_mgr, STT_FUNC; | ||
41 | .type _panic_cplb_error, STT_FUNC; | ||
42 | |||
43 | .align 2 | ||
44 | |||
45 | ENTRY(__cplb_hdr) | ||
46 | R2 = SEQSTAT; | ||
47 | |||
48 | /* Mask the contents of SEQSTAT and leave only EXCAUSE in R2 */ | ||
49 | R2 <<= 26; | ||
50 | R2 >>= 26; | ||
51 | |||
52 | R1 = 0x23; /* Data access CPLB protection violation */ | ||
53 | CC = R2 == R1; | ||
54 | IF !CC JUMP .Lnot_data_write; | ||
55 | R0 = 2; /* is a write to data space*/ | ||
56 | JUMP .Lis_icplb_miss; | ||
57 | |||
58 | .Lnot_data_write: | ||
59 | R1 = 0x2C; /* CPLB miss on an instruction fetch */ | ||
60 | CC = R2 == R1; | ||
61 | R0 = 0; /* is_data_miss == False*/ | ||
62 | IF CC JUMP .Lis_icplb_miss; | ||
63 | |||
64 | R1 = 0x26; | ||
65 | CC = R2 == R1; | ||
66 | IF !CC JUMP .Lunknown; | ||
67 | |||
68 | R0 = 1; /* is_data_miss == True*/ | ||
69 | |||
70 | .Lis_icplb_miss: | ||
71 | |||
72 | #if defined(CONFIG_BFIN_ICACHE) || defined(CONFIG_BFIN_DCACHE) | ||
73 | # if defined(CONFIG_BFIN_ICACHE) && !defined(CONFIG_BFIN_DCACHE) | ||
74 | R1 = CPLB_ENABLE_ICACHE; | ||
75 | # endif | ||
76 | # if !defined(CONFIG_BFIN_ICACHE) && defined(CONFIG_BFIN_DCACHE) | ||
77 | R1 = CPLB_ENABLE_DCACHE; | ||
78 | # endif | ||
79 | # if defined(CONFIG_BFIN_ICACHE) && defined(CONFIG_BFIN_DCACHE) | ||
80 | R1 = CPLB_ENABLE_DCACHE | CPLB_ENABLE_ICACHE; | ||
81 | # endif | ||
82 | #else | ||
83 | R1 = 0; | ||
84 | #endif | ||
85 | |||
86 | [--SP] = RETS; | ||
87 | CALL _cplb_mgr; | ||
88 | RETS = [SP++]; | ||
89 | CC = R0 == 0; | ||
90 | IF !CC JUMP .Lnot_replaced; | ||
91 | RTS; | ||
92 | |||
93 | /* | ||
94 | * Diagnostic exception handlers | ||
95 | */ | ||
96 | .Lunknown: | ||
97 | R0 = CPLB_UNKNOWN_ERR; | ||
98 | JUMP .Lcplb_error; | ||
99 | |||
100 | .Lnot_replaced: | ||
101 | CC = R0 == CPLB_NO_UNLOCKED; | ||
102 | IF !CC JUMP .Lnext_check; | ||
103 | R0 = CPLB_NO_UNLOCKED; | ||
104 | JUMP .Lcplb_error; | ||
105 | |||
106 | .Lnext_check: | ||
107 | CC = R0 == CPLB_NO_ADDR_MATCH; | ||
108 | IF !CC JUMP .Lnext_check2; | ||
109 | R0 = CPLB_NO_ADDR_MATCH; | ||
110 | JUMP .Lcplb_error; | ||
111 | |||
112 | .Lnext_check2: | ||
113 | CC = R0 == CPLB_PROT_VIOL; | ||
114 | IF !CC JUMP .Lstrange_return_from_cplb_mgr; | ||
115 | R0 = CPLB_PROT_VIOL; | ||
116 | JUMP .Lcplb_error; | ||
117 | |||
118 | .Lstrange_return_from_cplb_mgr: | ||
119 | IDLE; | ||
120 | CSYNC; | ||
121 | JUMP .Lstrange_return_from_cplb_mgr; | ||
122 | |||
123 | .Lcplb_error: | ||
124 | R1 = sp; | ||
125 | SP += -12; | ||
126 | call _panic_cplb_error; | ||
127 | SP += 12; | ||
128 | JUMP.L _handle_bad_cplb; | ||
129 | |||
130 | ENDPROC(__cplb_hdr) | ||
diff --git a/arch/blackfin/kernel/cplb-nompu/cplbinfo.c b/arch/blackfin/kernel/cplb-nompu/cplbinfo.c deleted file mode 100644 index 1e74f0b97996..000000000000 --- a/arch/blackfin/kernel/cplb-nompu/cplbinfo.c +++ /dev/null | |||
@@ -1,195 +0,0 @@ | |||
1 | /* | ||
2 | * File: arch/blackfin/mach-common/cplbinfo.c | ||
3 | * Based on: | ||
4 | * Author: Sonic Zhang <sonic.zhang@analog.com> | ||
5 | * | ||
6 | * Created: Jan. 2005 | ||
7 | * Description: Display CPLB status | ||
8 | * | ||
9 | * Modified: | ||
10 | * Copyright 2004-2006 Analog Devices Inc. | ||
11 | * | ||
12 | * Bugs: Enter bugs at http://blackfin.uclinux.org/ | ||
13 | * | ||
14 | * This program is free software; you can redistribute it and/or modify | ||
15 | * it under the terms of the GNU General Public License as published by | ||
16 | * the Free Software Foundation; either version 2 of the License, or | ||
17 | * (at your option) any later version. | ||
18 | * | ||
19 | * This program is distributed in the hope that it will be useful, | ||
20 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | ||
21 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | ||
22 | * GNU General Public License for more details. | ||
23 | * | ||
24 | * You should have received a copy of the GNU General Public License | ||
25 | * along with this program; if not, see the file COPYING, or write | ||
26 | * to the Free Software Foundation, Inc., | ||
27 | * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA | ||
28 | */ | ||
29 | |||
30 | #include <linux/module.h> | ||
31 | #include <linux/kernel.h> | ||
32 | #include <linux/init.h> | ||
33 | #include <linux/proc_fs.h> | ||
34 | #include <linux/uaccess.h> | ||
35 | |||
36 | #include <asm/cplbinit.h> | ||
37 | #include <asm/blackfin.h> | ||
38 | |||
39 | #define CPLB_I 1 | ||
40 | #define CPLB_D 2 | ||
41 | |||
42 | #define SYNC_SYS SSYNC() | ||
43 | #define SYNC_CORE CSYNC() | ||
44 | |||
45 | #define CPLB_BIT_PAGESIZE 0x30000 | ||
46 | |||
47 | static int page_size_table[4] = { | ||
48 | 0x00000400, /* 1K */ | ||
49 | 0x00001000, /* 4K */ | ||
50 | 0x00100000, /* 1M */ | ||
51 | 0x00400000 /* 4M */ | ||
52 | }; | ||
53 | |||
54 | static char page_size_string_table[][4] = { "1K", "4K", "1M", "4M" }; | ||
55 | |||
56 | static int cplb_find_entry(unsigned long *cplb_addr, | ||
57 | unsigned long *cplb_data, unsigned long addr, | ||
58 | unsigned long data) | ||
59 | { | ||
60 | int ii; | ||
61 | |||
62 | for (ii = 0; ii < 16; ii++) | ||
63 | if (addr >= cplb_addr[ii] && addr < cplb_addr[ii] + | ||
64 | page_size_table[(cplb_data[ii] & CPLB_BIT_PAGESIZE) >> 16] | ||
65 | && (cplb_data[ii] == data)) | ||
66 | return ii; | ||
67 | |||
68 | return -1; | ||
69 | } | ||
70 | |||
71 | static char *cplb_print_entry(char *buf, int type) | ||
72 | { | ||
73 | unsigned long *p_addr = dpdt_table; | ||
74 | unsigned long *p_data = dpdt_table + 1; | ||
75 | unsigned long *p_icount = dpdt_swapcount_table; | ||
76 | unsigned long *p_ocount = dpdt_swapcount_table + 1; | ||
77 | unsigned long *cplb_addr = (unsigned long *)DCPLB_ADDR0; | ||
78 | unsigned long *cplb_data = (unsigned long *)DCPLB_DATA0; | ||
79 | int entry = 0, used_cplb = 0; | ||
80 | |||
81 | if (type == CPLB_I) { | ||
82 | buf += sprintf(buf, "Instruction CPLB entry:\n"); | ||
83 | p_addr = ipdt_table; | ||
84 | p_data = ipdt_table + 1; | ||
85 | p_icount = ipdt_swapcount_table; | ||
86 | p_ocount = ipdt_swapcount_table + 1; | ||
87 | cplb_addr = (unsigned long *)ICPLB_ADDR0; | ||
88 | cplb_data = (unsigned long *)ICPLB_DATA0; | ||
89 | } else | ||
90 | buf += sprintf(buf, "Data CPLB entry:\n"); | ||
91 | |||
92 | buf += sprintf(buf, "Address\t\tData\tSize\tValid\tLocked\tSwapin\tiCount\toCount\n"); | ||
93 | |||
94 | while (*p_addr != 0xffffffff) { | ||
95 | entry = cplb_find_entry(cplb_addr, cplb_data, *p_addr, *p_data); | ||
96 | if (entry >= 0) | ||
97 | used_cplb |= 1 << entry; | ||
98 | |||
99 | buf += | ||
100 | sprintf(buf, | ||
101 | "0x%08lx\t0x%05lx\t%s\t%c\t%c\t%2d\t%ld\t%ld\n", | ||
102 | *p_addr, *p_data, | ||
103 | page_size_string_table[(*p_data & 0x30000) >> 16], | ||
104 | (*p_data & CPLB_VALID) ? 'Y' : 'N', | ||
105 | (*p_data & CPLB_LOCK) ? 'Y' : 'N', entry, *p_icount, | ||
106 | *p_ocount); | ||
107 | |||
108 | p_addr += 2; | ||
109 | p_data += 2; | ||
110 | p_icount += 2; | ||
111 | p_ocount += 2; | ||
112 | } | ||
113 | |||
114 | if (used_cplb != 0xffff) { | ||
115 | buf += sprintf(buf, "Unused/mismatched CPLBs:\n"); | ||
116 | |||
117 | for (entry = 0; entry < 16; entry++) | ||
118 | if (0 == ((1 << entry) & used_cplb)) { | ||
119 | int flags = cplb_data[entry]; | ||
120 | buf += | ||
121 | sprintf(buf, | ||
122 | "%2d: 0x%08lx\t0x%05x\t%s\t%c\t%c\n", | ||
123 | entry, cplb_addr[entry], flags, | ||
124 | page_size_string_table[(flags & | ||
125 | 0x30000) >> | ||
126 | 16], | ||
127 | (flags & CPLB_VALID) ? 'Y' : 'N', | ||
128 | (flags & CPLB_LOCK) ? 'Y' : 'N'); | ||
129 | } | ||
130 | } | ||
131 | |||
132 | buf += sprintf(buf, "\n"); | ||
133 | |||
134 | return buf; | ||
135 | } | ||
136 | |||
137 | static int cplbinfo_proc_output(char *buf) | ||
138 | { | ||
139 | char *p; | ||
140 | |||
141 | p = buf; | ||
142 | |||
143 | p += sprintf(p, "------------------ CPLB Information ------------------\n\n"); | ||
144 | |||
145 | if (bfin_read_IMEM_CONTROL() & ENICPLB) | ||
146 | p = cplb_print_entry(p, CPLB_I); | ||
147 | else | ||
148 | p += sprintf(p, "Instruction CPLB is disabled.\n\n"); | ||
149 | |||
150 | if (bfin_read_DMEM_CONTROL() & ENDCPLB) | ||
151 | p = cplb_print_entry(p, CPLB_D); | ||
152 | else | ||
153 | p += sprintf(p, "Data CPLB is disabled.\n"); | ||
154 | |||
155 | return p - buf; | ||
156 | } | ||
157 | |||
158 | static int cplbinfo_read_proc(char *page, char **start, off_t off, | ||
159 | int count, int *eof, void *data) | ||
160 | { | ||
161 | int len; | ||
162 | |||
163 | len = cplbinfo_proc_output(page); | ||
164 | if (len <= off + count) | ||
165 | *eof = 1; | ||
166 | *start = page + off; | ||
167 | len -= off; | ||
168 | if (len > count) | ||
169 | len = count; | ||
170 | if (len < 0) | ||
171 | len = 0; | ||
172 | return len; | ||
173 | } | ||
174 | |||
175 | static int __init cplbinfo_init(void) | ||
176 | { | ||
177 | struct proc_dir_entry *entry; | ||
178 | |||
179 | entry = create_proc_entry("cplbinfo", 0, NULL); | ||
180 | if (!entry) | ||
181 | return -ENOMEM; | ||
182 | |||
183 | entry->read_proc = cplbinfo_read_proc; | ||
184 | entry->data = NULL; | ||
185 | |||
186 | return 0; | ||
187 | } | ||
188 | |||
189 | static void __exit cplbinfo_exit(void) | ||
190 | { | ||
191 | remove_proc_entry("cplbinfo", NULL); | ||
192 | } | ||
193 | |||
194 | module_init(cplbinfo_init); | ||
195 | module_exit(cplbinfo_exit); | ||
diff --git a/arch/blackfin/kernel/cplb-nompu/cplbinit.c b/arch/blackfin/kernel/cplb-nompu/cplbinit.c index 2debc900e246..0e28f7595733 100644 --- a/arch/blackfin/kernel/cplb-nompu/cplbinit.c +++ b/arch/blackfin/kernel/cplb-nompu/cplbinit.c | |||
@@ -20,445 +20,152 @@ | |||
20 | * to the Free Software Foundation, Inc., | 20 | * to the Free Software Foundation, Inc., |
21 | * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA | 21 | * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA |
22 | */ | 22 | */ |
23 | |||
23 | #include <linux/module.h> | 24 | #include <linux/module.h> |
24 | 25 | ||
25 | #include <asm/blackfin.h> | 26 | #include <asm/blackfin.h> |
26 | #include <asm/cacheflush.h> | 27 | #include <asm/cacheflush.h> |
27 | #include <asm/cplb.h> | 28 | #include <asm/cplb.h> |
28 | #include <asm/cplbinit.h> | 29 | #include <asm/cplbinit.h> |
30 | #include <asm/mem_map.h> | ||
29 | 31 | ||
30 | #define CPLB_MEM CONFIG_MAX_MEM_SIZE | 32 | struct cplb_entry icplb_tbl[NR_CPUS][MAX_CPLBS] PDT_ATTR; |
31 | 33 | struct cplb_entry dcplb_tbl[NR_CPUS][MAX_CPLBS] PDT_ATTR; | |
32 | /* | ||
33 | * Number of required data CPLB switchtable entries | ||
34 | * MEMSIZE / 4 (we mostly install 4M page size CPLBs | ||
35 | * approx 16 for smaller 1MB page size CPLBs for allignment purposes | ||
36 | * 1 for L1 Data Memory | ||
37 | * possibly 1 for L2 Data Memory | ||
38 | * 1 for CONFIG_DEBUG_HUNT_FOR_ZERO | ||
39 | * 1 for ASYNC Memory | ||
40 | */ | ||
41 | #define MAX_SWITCH_D_CPLBS (((CPLB_MEM / 4) + 16 + 1 + 1 + 1 \ | ||
42 | + ASYNC_MEMORY_CPLB_COVERAGE) * 2) | ||
43 | |||
44 | /* | ||
45 | * Number of required instruction CPLB switchtable entries | ||
46 | * MEMSIZE / 4 (we mostly install 4M page size CPLBs | ||
47 | * approx 12 for smaller 1MB page size CPLBs for allignment purposes | ||
48 | * 1 for L1 Instruction Memory | ||
49 | * possibly 1 for L2 Instruction Memory | ||
50 | * 1 for CONFIG_DEBUG_HUNT_FOR_ZERO | ||
51 | */ | ||
52 | #define MAX_SWITCH_I_CPLBS (((CPLB_MEM / 4) + 12 + 1 + 1 + 1) * 2) | ||
53 | |||
54 | |||
55 | u_long icplb_table[MAX_CPLBS + 1]; | ||
56 | u_long dcplb_table[MAX_CPLBS + 1]; | ||
57 | |||
58 | #ifdef CONFIG_CPLB_SWITCH_TAB_L1 | ||
59 | # define PDT_ATTR __attribute__((l1_data)) | ||
60 | #else | ||
61 | # define PDT_ATTR | ||
62 | #endif | ||
63 | |||
64 | u_long ipdt_table[MAX_SWITCH_I_CPLBS + 1] PDT_ATTR; | ||
65 | u_long dpdt_table[MAX_SWITCH_D_CPLBS + 1] PDT_ATTR; | ||
66 | 34 | ||
67 | #ifdef CONFIG_CPLB_INFO | 35 | int first_switched_icplb PDT_ATTR; |
68 | u_long ipdt_swapcount_table[MAX_SWITCH_I_CPLBS] PDT_ATTR; | 36 | int first_switched_dcplb PDT_ATTR; |
69 | u_long dpdt_swapcount_table[MAX_SWITCH_D_CPLBS] PDT_ATTR; | ||
70 | #endif | ||
71 | 37 | ||
72 | struct s_cplb { | 38 | struct cplb_boundary dcplb_bounds[9] PDT_ATTR; |
73 | struct cplb_tab init_i; | 39 | struct cplb_boundary icplb_bounds[7] PDT_ATTR; |
74 | struct cplb_tab init_d; | ||
75 | struct cplb_tab switch_i; | ||
76 | struct cplb_tab switch_d; | ||
77 | }; | ||
78 | 40 | ||
79 | #if defined(CONFIG_BFIN_DCACHE) || defined(CONFIG_BFIN_ICACHE) | 41 | int icplb_nr_bounds PDT_ATTR; |
80 | static struct cplb_desc cplb_data[] = { | 42 | int dcplb_nr_bounds PDT_ATTR; |
81 | { | ||
82 | .start = 0, | ||
83 | .end = SIZE_1K, | ||
84 | .psize = SIZE_1K, | ||
85 | .attr = INITIAL_T | SWITCH_T | I_CPLB | D_CPLB, | ||
86 | .i_conf = SDRAM_OOPS, | ||
87 | .d_conf = SDRAM_OOPS, | ||
88 | #if defined(CONFIG_DEBUG_HUNT_FOR_ZERO) | ||
89 | .valid = 1, | ||
90 | #else | ||
91 | .valid = 0, | ||
92 | #endif | ||
93 | .name = "Zero Pointer Guard Page", | ||
94 | }, | ||
95 | { | ||
96 | .start = L1_CODE_START, | ||
97 | .end = L1_CODE_START + L1_CODE_LENGTH, | ||
98 | .psize = SIZE_4M, | ||
99 | .attr = INITIAL_T | SWITCH_T | I_CPLB, | ||
100 | .i_conf = L1_IMEMORY, | ||
101 | .d_conf = 0, | ||
102 | .valid = 1, | ||
103 | .name = "L1 I-Memory", | ||
104 | }, | ||
105 | { | ||
106 | .start = L1_DATA_A_START, | ||
107 | .end = L1_DATA_B_START + L1_DATA_B_LENGTH, | ||
108 | .psize = SIZE_4M, | ||
109 | .attr = INITIAL_T | SWITCH_T | D_CPLB, | ||
110 | .i_conf = 0, | ||
111 | .d_conf = L1_DMEMORY, | ||
112 | #if ((L1_DATA_A_LENGTH > 0) || (L1_DATA_B_LENGTH > 0)) | ||
113 | .valid = 1, | ||
114 | #else | ||
115 | .valid = 0, | ||
116 | #endif | ||
117 | .name = "L1 D-Memory", | ||
118 | }, | ||
119 | { | ||
120 | .start = 0, | ||
121 | .end = 0, /* dynamic */ | ||
122 | .psize = 0, | ||
123 | .attr = INITIAL_T | SWITCH_T | I_CPLB | D_CPLB, | ||
124 | .i_conf = SDRAM_IGENERIC, | ||
125 | .d_conf = SDRAM_DGENERIC, | ||
126 | .valid = 1, | ||
127 | .name = "Kernel Memory", | ||
128 | }, | ||
129 | { | ||
130 | .start = 0, /* dynamic */ | ||
131 | .end = 0, /* dynamic */ | ||
132 | .psize = 0, | ||
133 | .attr = INITIAL_T | SWITCH_T | D_CPLB, | ||
134 | .i_conf = SDRAM_IGENERIC, | ||
135 | .d_conf = SDRAM_DNON_CHBL, | ||
136 | .valid = 1, | ||
137 | .name = "uClinux MTD Memory", | ||
138 | }, | ||
139 | { | ||
140 | .start = 0, /* dynamic */ | ||
141 | .end = 0, /* dynamic */ | ||
142 | .psize = SIZE_1M, | ||
143 | .attr = INITIAL_T | SWITCH_T | D_CPLB, | ||
144 | .d_conf = SDRAM_DNON_CHBL, | ||
145 | .valid = 1, | ||
146 | .name = "Uncached DMA Zone", | ||
147 | }, | ||
148 | { | ||
149 | .start = 0, /* dynamic */ | ||
150 | .end = 0, /* dynamic */ | ||
151 | .psize = 0, | ||
152 | .attr = SWITCH_T | D_CPLB, | ||
153 | .i_conf = 0, /* dynamic */ | ||
154 | .d_conf = 0, /* dynamic */ | ||
155 | .valid = 1, | ||
156 | .name = "Reserved Memory", | ||
157 | }, | ||
158 | { | ||
159 | .start = ASYNC_BANK0_BASE, | ||
160 | .end = ASYNC_BANK3_BASE + ASYNC_BANK3_SIZE, | ||
161 | .psize = 0, | ||
162 | .attr = SWITCH_T | D_CPLB, | ||
163 | .d_conf = SDRAM_EBIU, | ||
164 | .valid = 1, | ||
165 | .name = "Asynchronous Memory Banks", | ||
166 | }, | ||
167 | { | ||
168 | .start = L2_START, | ||
169 | .end = L2_START + L2_LENGTH, | ||
170 | .psize = SIZE_1M, | ||
171 | .attr = SWITCH_T | I_CPLB | D_CPLB, | ||
172 | .i_conf = L2_IMEMORY, | ||
173 | .d_conf = L2_DMEMORY, | ||
174 | .valid = (L2_LENGTH > 0), | ||
175 | .name = "L2 Memory", | ||
176 | }, | ||
177 | { | ||
178 | .start = BOOT_ROM_START, | ||
179 | .end = BOOT_ROM_START + BOOT_ROM_LENGTH, | ||
180 | .psize = SIZE_1M, | ||
181 | .attr = SWITCH_T | I_CPLB | D_CPLB, | ||
182 | .i_conf = SDRAM_IGENERIC, | ||
183 | .d_conf = SDRAM_DGENERIC, | ||
184 | .valid = 1, | ||
185 | .name = "On-Chip BootROM", | ||
186 | }, | ||
187 | }; | ||
188 | 43 | ||
189 | static u16 __init lock_kernel_check(u32 start, u32 end) | 44 | void __init generate_cplb_tables_cpu(unsigned int cpu) |
190 | { | 45 | { |
191 | if (start >= (u32)_end || end <= (u32)_stext) | 46 | int i_d, i_i; |
192 | return 0; | 47 | unsigned long addr; |
193 | 48 | ||
194 | /* This cplb block overlapped with kernel area. */ | 49 | struct cplb_entry *d_tbl = dcplb_tbl[cpu]; |
195 | return IN_KERNEL; | 50 | struct cplb_entry *i_tbl = icplb_tbl[cpu]; |
196 | } | ||
197 | 51 | ||
198 | static unsigned short __init | 52 | printk(KERN_INFO "NOMPU: setting up cplb tables\n"); |
199 | fill_cplbtab(struct cplb_tab *table, | ||
200 | unsigned long start, unsigned long end, | ||
201 | unsigned long block_size, unsigned long cplb_data) | ||
202 | { | ||
203 | int i; | ||
204 | 53 | ||
205 | switch (block_size) { | 54 | i_d = i_i = 0; |
206 | case SIZE_4M: | ||
207 | i = 3; | ||
208 | break; | ||
209 | case SIZE_1M: | ||
210 | i = 2; | ||
211 | break; | ||
212 | case SIZE_4K: | ||
213 | i = 1; | ||
214 | break; | ||
215 | case SIZE_1K: | ||
216 | default: | ||
217 | i = 0; | ||
218 | break; | ||
219 | } | ||
220 | |||
221 | cplb_data = (cplb_data & ~(3 << 16)) | (i << 16); | ||
222 | |||
223 | while ((start < end) && (table->pos < table->size)) { | ||
224 | 55 | ||
225 | table->tab[table->pos++] = start; | 56 | /* Set up the zero page. */ |
57 | d_tbl[i_d].addr = 0; | ||
58 | d_tbl[i_d++].data = SDRAM_OOPS | PAGE_SIZE_1KB; | ||
226 | 59 | ||
227 | if (lock_kernel_check(start, start + block_size) == IN_KERNEL) | 60 | /* Cover kernel memory with 4M pages. */ |
228 | table->tab[table->pos++] = | 61 | addr = 0; |
229 | cplb_data | CPLB_LOCK | CPLB_DIRTY; | ||
230 | else | ||
231 | table->tab[table->pos++] = cplb_data; | ||
232 | 62 | ||
233 | start += block_size; | 63 | for (; addr < memory_start; addr += 4 * 1024 * 1024) { |
64 | d_tbl[i_d].addr = addr; | ||
65 | d_tbl[i_d++].data = SDRAM_DGENERIC | PAGE_SIZE_4MB; | ||
66 | i_tbl[i_i].addr = addr; | ||
67 | i_tbl[i_i++].data = SDRAM_IGENERIC | PAGE_SIZE_4MB; | ||
234 | } | 68 | } |
235 | return 0; | ||
236 | } | ||
237 | 69 | ||
238 | static unsigned short __init | 70 | /* Cover L1 memory. One 4M area for code and data each is enough. */ |
239 | close_cplbtab(struct cplb_tab *table) | 71 | if (L1_DATA_A_LENGTH || L1_DATA_B_LENGTH) { |
240 | { | 72 | d_tbl[i_d].addr = L1_DATA_A_START; |
241 | 73 | d_tbl[i_d++].data = L1_DMEMORY | PAGE_SIZE_4MB; | |
242 | while (table->pos < table->size) { | ||
243 | |||
244 | table->tab[table->pos++] = 0; | ||
245 | table->tab[table->pos++] = 0; /* !CPLB_VALID */ | ||
246 | } | 74 | } |
247 | return 0; | 75 | i_tbl[i_i].addr = L1_CODE_START; |
248 | } | 76 | i_tbl[i_i++].data = L1_IMEMORY | PAGE_SIZE_4MB; |
249 | 77 | ||
250 | /* helper function */ | 78 | first_switched_dcplb = i_d; |
251 | static void __init | 79 | first_switched_icplb = i_i; |
252 | __fill_code_cplbtab(struct cplb_tab *t, int i, u32 a_start, u32 a_end) | ||
253 | { | ||
254 | if (cplb_data[i].psize) { | ||
255 | fill_cplbtab(t, | ||
256 | cplb_data[i].start, | ||
257 | cplb_data[i].end, | ||
258 | cplb_data[i].psize, | ||
259 | cplb_data[i].i_conf); | ||
260 | } else { | ||
261 | #if defined(CONFIG_BFIN_ICACHE) | ||
262 | if (ANOMALY_05000263 && i == SDRAM_KERN) { | ||
263 | fill_cplbtab(t, | ||
264 | cplb_data[i].start, | ||
265 | cplb_data[i].end, | ||
266 | SIZE_4M, | ||
267 | cplb_data[i].i_conf); | ||
268 | } else | ||
269 | #endif | ||
270 | { | ||
271 | fill_cplbtab(t, | ||
272 | cplb_data[i].start, | ||
273 | a_start, | ||
274 | SIZE_1M, | ||
275 | cplb_data[i].i_conf); | ||
276 | fill_cplbtab(t, | ||
277 | a_start, | ||
278 | a_end, | ||
279 | SIZE_4M, | ||
280 | cplb_data[i].i_conf); | ||
281 | fill_cplbtab(t, a_end, | ||
282 | cplb_data[i].end, | ||
283 | SIZE_1M, | ||
284 | cplb_data[i].i_conf); | ||
285 | } | ||
286 | } | ||
287 | } | ||
288 | 80 | ||
289 | static void __init | 81 | BUG_ON(first_switched_dcplb > MAX_CPLBS); |
290 | __fill_data_cplbtab(struct cplb_tab *t, int i, u32 a_start, u32 a_end) | 82 | BUG_ON(first_switched_icplb > MAX_CPLBS); |
291 | { | 83 | |
292 | if (cplb_data[i].psize) { | 84 | while (i_d < MAX_CPLBS) |
293 | fill_cplbtab(t, | 85 | d_tbl[i_d++].data = 0; |
294 | cplb_data[i].start, | 86 | while (i_i < MAX_CPLBS) |
295 | cplb_data[i].end, | 87 | i_tbl[i_i++].data = 0; |
296 | cplb_data[i].psize, | ||
297 | cplb_data[i].d_conf); | ||
298 | } else { | ||
299 | fill_cplbtab(t, | ||
300 | cplb_data[i].start, | ||
301 | a_start, SIZE_1M, | ||
302 | cplb_data[i].d_conf); | ||
303 | fill_cplbtab(t, a_start, | ||
304 | a_end, SIZE_4M, | ||
305 | cplb_data[i].d_conf); | ||
306 | fill_cplbtab(t, a_end, | ||
307 | cplb_data[i].end, | ||
308 | SIZE_1M, | ||
309 | cplb_data[i].d_conf); | ||
310 | } | ||
311 | } | 88 | } |
312 | 89 | ||
313 | void __init generate_cplb_tables(void) | 90 | void __init generate_cplb_tables_all(void) |
314 | { | 91 | { |
92 | int i_d, i_i; | ||
315 | 93 | ||
316 | u16 i, j, process; | 94 | i_d = 0; |
317 | u32 a_start, a_end, as, ae, as_1m; | 95 | /* Normal RAM, including MTD FS. */ |
318 | |||
319 | struct cplb_tab *t_i = NULL; | ||
320 | struct cplb_tab *t_d = NULL; | ||
321 | struct s_cplb cplb; | ||
322 | |||
323 | printk(KERN_INFO "NOMPU: setting up cplb tables for global access\n"); | ||
324 | |||
325 | cplb.init_i.size = MAX_CPLBS; | ||
326 | cplb.init_d.size = MAX_CPLBS; | ||
327 | cplb.switch_i.size = MAX_SWITCH_I_CPLBS; | ||
328 | cplb.switch_d.size = MAX_SWITCH_D_CPLBS; | ||
329 | |||
330 | cplb.init_i.pos = 0; | ||
331 | cplb.init_d.pos = 0; | ||
332 | cplb.switch_i.pos = 0; | ||
333 | cplb.switch_d.pos = 0; | ||
334 | |||
335 | cplb.init_i.tab = icplb_table; | ||
336 | cplb.init_d.tab = dcplb_table; | ||
337 | cplb.switch_i.tab = ipdt_table; | ||
338 | cplb.switch_d.tab = dpdt_table; | ||
339 | |||
340 | cplb_data[SDRAM_KERN].end = memory_end; | ||
341 | |||
342 | #ifdef CONFIG_MTD_UCLINUX | 96 | #ifdef CONFIG_MTD_UCLINUX |
343 | cplb_data[SDRAM_RAM_MTD].start = memory_mtd_start; | 97 | dcplb_bounds[i_d].eaddr = memory_mtd_start + mtd_size; |
344 | cplb_data[SDRAM_RAM_MTD].end = memory_mtd_start + mtd_size; | ||
345 | cplb_data[SDRAM_RAM_MTD].valid = mtd_size > 0; | ||
346 | # if defined(CONFIG_ROMFS_FS) | ||
347 | cplb_data[SDRAM_RAM_MTD].attr |= I_CPLB; | ||
348 | |||
349 | /* | ||
350 | * The ROMFS_FS size is often not multiple of 1MB. | ||
351 | * This can cause multiple CPLB sets covering the same memory area. | ||
352 | * This will then cause multiple CPLB hit exceptions. | ||
353 | * Workaround: We ensure a contiguous memory area by extending the kernel | ||
354 | * memory section over the mtd section. | ||
355 | * For ROMFS_FS memory must be covered with ICPLBs anyways. | ||
356 | * So there is no difference between kernel and mtd memory setup. | ||
357 | */ | ||
358 | |||
359 | cplb_data[SDRAM_KERN].end = memory_mtd_start + mtd_size;; | ||
360 | cplb_data[SDRAM_RAM_MTD].valid = 0; | ||
361 | |||
362 | # endif | ||
363 | #else | 98 | #else |
364 | cplb_data[SDRAM_RAM_MTD].valid = 0; | 99 | dcplb_bounds[i_d].eaddr = memory_end; |
365 | #endif | 100 | #endif |
101 | dcplb_bounds[i_d++].data = SDRAM_DGENERIC; | ||
102 | /* DMA uncached region. */ | ||
103 | if (DMA_UNCACHED_REGION) { | ||
104 | dcplb_bounds[i_d].eaddr = _ramend; | ||
105 | dcplb_bounds[i_d++].data = SDRAM_DNON_CHBL; | ||
106 | } | ||
107 | if (_ramend != physical_mem_end) { | ||
108 | /* Reserved memory. */ | ||
109 | dcplb_bounds[i_d].eaddr = physical_mem_end; | ||
110 | dcplb_bounds[i_d++].data = (reserved_mem_dcache_on ? | ||
111 | SDRAM_DGENERIC : SDRAM_DNON_CHBL); | ||
112 | } | ||
113 | /* Addressing hole up to the async bank. */ | ||
114 | dcplb_bounds[i_d].eaddr = ASYNC_BANK0_BASE; | ||
115 | dcplb_bounds[i_d++].data = 0; | ||
116 | /* ASYNC banks. */ | ||
117 | dcplb_bounds[i_d].eaddr = ASYNC_BANK3_BASE + ASYNC_BANK3_SIZE; | ||
118 | dcplb_bounds[i_d++].data = SDRAM_EBIU; | ||
119 | /* Addressing hole up to BootROM. */ | ||
120 | dcplb_bounds[i_d].eaddr = BOOT_ROM_START; | ||
121 | dcplb_bounds[i_d++].data = 0; | ||
122 | /* BootROM -- largest one should be less than 1 meg. */ | ||
123 | dcplb_bounds[i_d].eaddr = BOOT_ROM_START + (1 * 1024 * 1024); | ||
124 | dcplb_bounds[i_d++].data = SDRAM_DGENERIC; | ||
125 | if (L2_LENGTH) { | ||
126 | /* Addressing hole up to L2 SRAM. */ | ||
127 | dcplb_bounds[i_d].eaddr = L2_START; | ||
128 | dcplb_bounds[i_d++].data = 0; | ||
129 | /* L2 SRAM. */ | ||
130 | dcplb_bounds[i_d].eaddr = L2_START + L2_LENGTH; | ||
131 | dcplb_bounds[i_d++].data = L2_DMEMORY; | ||
132 | } | ||
133 | dcplb_nr_bounds = i_d; | ||
134 | BUG_ON(dcplb_nr_bounds > ARRAY_SIZE(dcplb_bounds)); | ||
366 | 135 | ||
367 | cplb_data[SDRAM_DMAZ].start = _ramend - DMA_UNCACHED_REGION; | 136 | i_i = 0; |
368 | cplb_data[SDRAM_DMAZ].end = _ramend; | 137 | /* Normal RAM, including MTD FS. */ |
369 | |||
370 | cplb_data[RES_MEM].start = _ramend; | ||
371 | cplb_data[RES_MEM].end = physical_mem_end; | ||
372 | |||
373 | if (reserved_mem_dcache_on) | ||
374 | cplb_data[RES_MEM].d_conf = SDRAM_DGENERIC; | ||
375 | else | ||
376 | cplb_data[RES_MEM].d_conf = SDRAM_DNON_CHBL; | ||
377 | |||
378 | if (reserved_mem_icache_on) | ||
379 | cplb_data[RES_MEM].i_conf = SDRAM_IGENERIC; | ||
380 | else | ||
381 | cplb_data[RES_MEM].i_conf = SDRAM_INON_CHBL; | ||
382 | |||
383 | for (i = ZERO_P; i < ARRAY_SIZE(cplb_data); ++i) { | ||
384 | if (!cplb_data[i].valid) | ||
385 | continue; | ||
386 | |||
387 | as_1m = cplb_data[i].start % SIZE_1M; | ||
388 | |||
389 | /* We need to make sure all sections are properly 1M aligned | ||
390 | * However between Kernel Memory and the Kernel mtd section, depending on the | ||
391 | * rootfs size, there can be overlapping memory areas. | ||
392 | */ | ||
393 | |||
394 | if (as_1m && i != L1I_MEM && i != L1D_MEM) { | ||
395 | #ifdef CONFIG_MTD_UCLINUX | 138 | #ifdef CONFIG_MTD_UCLINUX |
396 | if (i == SDRAM_RAM_MTD) { | 139 | icplb_bounds[i_i].eaddr = memory_mtd_start + mtd_size; |
397 | if ((cplb_data[SDRAM_KERN].end + 1) > cplb_data[SDRAM_RAM_MTD].start) | 140 | #else |
398 | cplb_data[SDRAM_RAM_MTD].start = (cplb_data[i].start & (-2*SIZE_1M)) + SIZE_1M; | 141 | icplb_bounds[i_i].eaddr = memory_end; |
399 | else | ||
400 | cplb_data[SDRAM_RAM_MTD].start = (cplb_data[i].start & (-2*SIZE_1M)); | ||
401 | } else | ||
402 | #endif | 142 | #endif |
403 | printk(KERN_WARNING "Unaligned Start of %s at 0x%X\n", | 143 | icplb_bounds[i_i++].data = SDRAM_IGENERIC; |
404 | cplb_data[i].name, cplb_data[i].start); | 144 | /* DMA uncached region. */ |
405 | } | 145 | if (DMA_UNCACHED_REGION) { |
406 | 146 | icplb_bounds[i_i].eaddr = _ramend; | |
407 | as = cplb_data[i].start % SIZE_4M; | 147 | icplb_bounds[i_i++].data = 0; |
408 | ae = cplb_data[i].end % SIZE_4M; | ||
409 | |||
410 | if (as) | ||
411 | a_start = cplb_data[i].start + (SIZE_4M - (as)); | ||
412 | else | ||
413 | a_start = cplb_data[i].start; | ||
414 | |||
415 | a_end = cplb_data[i].end - ae; | ||
416 | |||
417 | for (j = INITIAL_T; j <= SWITCH_T; j++) { | ||
418 | |||
419 | switch (j) { | ||
420 | case INITIAL_T: | ||
421 | if (cplb_data[i].attr & INITIAL_T) { | ||
422 | t_i = &cplb.init_i; | ||
423 | t_d = &cplb.init_d; | ||
424 | process = 1; | ||
425 | } else | ||
426 | process = 0; | ||
427 | break; | ||
428 | case SWITCH_T: | ||
429 | if (cplb_data[i].attr & SWITCH_T) { | ||
430 | t_i = &cplb.switch_i; | ||
431 | t_d = &cplb.switch_d; | ||
432 | process = 1; | ||
433 | } else | ||
434 | process = 0; | ||
435 | break; | ||
436 | default: | ||
437 | process = 0; | ||
438 | break; | ||
439 | } | ||
440 | |||
441 | if (!process) | ||
442 | continue; | ||
443 | if (cplb_data[i].attr & I_CPLB) | ||
444 | __fill_code_cplbtab(t_i, i, a_start, a_end); | ||
445 | |||
446 | if (cplb_data[i].attr & D_CPLB) | ||
447 | __fill_data_cplbtab(t_d, i, a_start, a_end); | ||
448 | } | ||
449 | } | 148 | } |
450 | 149 | if (_ramend != physical_mem_end) { | |
451 | /* close tables */ | 150 | /* Reserved memory. */ |
452 | 151 | icplb_bounds[i_i].eaddr = physical_mem_end; | |
453 | close_cplbtab(&cplb.init_i); | 152 | icplb_bounds[i_i++].data = (reserved_mem_icache_on ? |
454 | close_cplbtab(&cplb.init_d); | 153 | SDRAM_IGENERIC : SDRAM_INON_CHBL); |
455 | 154 | } | |
456 | cplb.init_i.tab[cplb.init_i.pos] = -1; | 155 | /* Addressing hole up to BootROM. */ |
457 | cplb.init_d.tab[cplb.init_d.pos] = -1; | 156 | icplb_bounds[i_i].eaddr = BOOT_ROM_START; |
458 | cplb.switch_i.tab[cplb.switch_i.pos] = -1; | 157 | icplb_bounds[i_i++].data = 0; |
459 | cplb.switch_d.tab[cplb.switch_d.pos] = -1; | 158 | /* BootROM -- largest one should be less than 1 meg. */ |
460 | 159 | icplb_bounds[i_i].eaddr = BOOT_ROM_START + (1 * 1024 * 1024); | |
160 | icplb_bounds[i_i++].data = SDRAM_IGENERIC; | ||
161 | if (L2_LENGTH) { | ||
162 | /* Addressing hole up to L2 SRAM, including the async bank. */ | ||
163 | icplb_bounds[i_i].eaddr = L2_START; | ||
164 | icplb_bounds[i_i++].data = 0; | ||
165 | /* L2 SRAM. */ | ||
166 | icplb_bounds[i_i].eaddr = L2_START + L2_LENGTH; | ||
167 | icplb_bounds[i_i++].data = L2_IMEMORY; | ||
168 | } | ||
169 | icplb_nr_bounds = i_i; | ||
170 | BUG_ON(icplb_nr_bounds > ARRAY_SIZE(icplb_bounds)); | ||
461 | } | 171 | } |
462 | |||
463 | #endif | ||
464 | |||
diff --git a/arch/blackfin/kernel/cplb-nompu/cplbmgr.S b/arch/blackfin/kernel/cplb-nompu/cplbmgr.S deleted file mode 100644 index f5cf3accef37..000000000000 --- a/arch/blackfin/kernel/cplb-nompu/cplbmgr.S +++ /dev/null | |||
@@ -1,646 +0,0 @@ | |||
1 | /* | ||
2 | * File: arch/blackfin/mach-common/cplbmgtr.S | ||
3 | * Based on: | ||
4 | * Author: LG Soft India | ||
5 | * | ||
6 | * Created: ? | ||
7 | * Description: CPLB replacement routine for CPLB mismatch | ||
8 | * | ||
9 | * Modified: | ||
10 | * Copyright 2004-2006 Analog Devices Inc. | ||
11 | * | ||
12 | * Bugs: Enter bugs at http://blackfin.uclinux.org/ | ||
13 | * | ||
14 | * This program is free software; you can redistribute it and/or modify | ||
15 | * it under the terms of the GNU General Public License as published by | ||
16 | * the Free Software Foundation; either version 2 of the License, or | ||
17 | * (at your option) any later version. | ||
18 | * | ||
19 | * This program is distributed in the hope that it will be useful, | ||
20 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | ||
21 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | ||
22 | * GNU General Public License for more details. | ||
23 | * | ||
24 | * You should have received a copy of the GNU General Public License | ||
25 | * along with this program; if not, see the file COPYING, or write | ||
26 | * to the Free Software Foundation, Inc., | ||
27 | * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA | ||
28 | */ | ||
29 | |||
30 | /* Usage: int _cplb_mgr(is_data_miss,int enable_cache) | ||
31 | * is_data_miss==2 => Mark as Dirty, write to the clean data page | ||
32 | * is_data_miss==1 => Replace a data CPLB. | ||
33 | * is_data_miss==0 => Replace an instruction CPLB. | ||
34 | * | ||
35 | * Returns: | ||
36 | * CPLB_RELOADED => Successfully updated CPLB table. | ||
37 | * CPLB_NO_UNLOCKED => All CPLBs are locked, so cannot be evicted. | ||
38 | * This indicates that the CPLBs in the configuration | ||
39 | * tablei are badly configured, as this should never | ||
40 | * occur. | ||
41 | * CPLB_NO_ADDR_MATCH => The address being accessed, that triggered the | ||
42 | * exception, is not covered by any of the CPLBs in | ||
43 | * the configuration table. The application is | ||
44 | * presumably misbehaving. | ||
45 | * CPLB_PROT_VIOL => The address being accessed, that triggered the | ||
46 | * exception, was not a first-write to a clean Write | ||
47 | * Back Data page, and so presumably is a genuine | ||
48 | * violation of the page's protection attributes. | ||
49 | * The application is misbehaving. | ||
50 | */ | ||
51 | |||
52 | #include <linux/linkage.h> | ||
53 | #include <asm/blackfin.h> | ||
54 | #include <asm/cplb.h> | ||
55 | |||
56 | #ifdef CONFIG_EXCPT_IRQ_SYSC_L1 | ||
57 | .section .l1.text | ||
58 | #else | ||
59 | .text | ||
60 | #endif | ||
61 | |||
62 | .align 2; | ||
63 | ENTRY(_cplb_mgr) | ||
64 | |||
65 | [--SP]=( R7:4,P5:3 ); | ||
66 | |||
67 | CC = R0 == 2; | ||
68 | IF CC JUMP .Ldcplb_write; | ||
69 | |||
70 | CC = R0 == 0; | ||
71 | IF !CC JUMP .Ldcplb_miss_compare; | ||
72 | |||
73 | /* ICPLB Miss Exception. We need to choose one of the | ||
74 | * currently-installed CPLBs, and replace it with one | ||
75 | * from the configuration table. | ||
76 | */ | ||
77 | |||
78 | /* A multi-word instruction can cross a page boundary. This means the | ||
79 | * first part of the instruction can be in a valid page, but the | ||
80 | * second part is not, and hence generates the instruction miss. | ||
81 | * However, the fault address is for the start of the instruction, | ||
82 | * not the part that's in the bad page. Therefore, we have to check | ||
83 | * whether the fault address applies to a page that is already present | ||
84 | * in the table. | ||
85 | */ | ||
86 | |||
87 | P4.L = LO(ICPLB_FAULT_ADDR); | ||
88 | P4.H = HI(ICPLB_FAULT_ADDR); | ||
89 | |||
90 | P1 = 16; | ||
91 | P5.L = _page_size_table; | ||
92 | P5.H = _page_size_table; | ||
93 | |||
94 | P0.L = LO(ICPLB_DATA0); | ||
95 | P0.H = HI(ICPLB_DATA0); | ||
96 | R4 = [P4]; /* Get faulting address*/ | ||
97 | R6 = 64; /* Advance past the fault address, which*/ | ||
98 | R6 = R6 + R4; /* we'll use if we find a match*/ | ||
99 | R3 = ((16 << 8) | 2); /* Extract mask, two bits at posn 16 */ | ||
100 | |||
101 | R5 = 0; | ||
102 | .Lisearch: | ||
103 | |||
104 | R1 = [P0-0x100]; /* Address for this CPLB */ | ||
105 | |||
106 | R0 = [P0++]; /* Info for this CPLB*/ | ||
107 | CC = BITTST(R0,0); /* Is the CPLB valid?*/ | ||
108 | IF !CC JUMP .Lnomatch; /* Skip it, if not.*/ | ||
109 | CC = R4 < R1(IU); /* If fault address less than page start*/ | ||
110 | IF CC JUMP .Lnomatch; /* then skip this one.*/ | ||
111 | R2 = EXTRACT(R0,R3.L) (Z); /* Get page size*/ | ||
112 | P1 = R2; | ||
113 | P1 = P5 + (P1<<2); /* index into page-size table*/ | ||
114 | R2 = [P1]; /* Get the page size*/ | ||
115 | R1 = R1 + R2; /* and add to page start, to get page end*/ | ||
116 | CC = R4 < R1(IU); /* and see whether fault addr is in page.*/ | ||
117 | IF !CC R4 = R6; /* If so, advance the address and finish loop.*/ | ||
118 | IF !CC JUMP .Lisearch_done; | ||
119 | .Lnomatch: | ||
120 | /* Go around again*/ | ||
121 | R5 += 1; | ||
122 | CC = BITTST(R5, 4); /* i.e CC = R5 >= 16*/ | ||
123 | IF !CC JUMP .Lisearch; | ||
124 | |||
125 | .Lisearch_done: | ||
126 | I0 = R4; /* Fault address we'll search for*/ | ||
127 | |||
128 | /* set up pointers */ | ||
129 | P0.L = LO(ICPLB_DATA0); | ||
130 | P0.H = HI(ICPLB_DATA0); | ||
131 | |||
132 | /* The replacement procedure for ICPLBs */ | ||
133 | |||
134 | P4.L = LO(IMEM_CONTROL); | ||
135 | P4.H = HI(IMEM_CONTROL); | ||
136 | |||
137 | /* Turn off CPLBs while we work, necessary according to HRM before | ||
138 | * modifying CPLB descriptors | ||
139 | */ | ||
140 | R5 = [P4]; /* Control Register*/ | ||
141 | BITCLR(R5,ENICPLB_P); | ||
142 | CLI R1; | ||
143 | SSYNC; /* SSYNC required before writing to IMEM_CONTROL. */ | ||
144 | .align 8; | ||
145 | [P4] = R5; | ||
146 | SSYNC; | ||
147 | STI R1; | ||
148 | |||
149 | R1 = -1; /* end point comparison */ | ||
150 | R3 = 16; /* counter */ | ||
151 | |||
152 | /* Search through CPLBs for first non-locked entry */ | ||
153 | /* Overwrite it by moving everyone else up by 1 */ | ||
154 | .Licheck_lock: | ||
155 | R0 = [P0++]; | ||
156 | R3 = R3 + R1; | ||
157 | CC = R3 == R1; | ||
158 | IF CC JUMP .Lall_locked; | ||
159 | CC = BITTST(R0, 0); /* an invalid entry is good */ | ||
160 | IF !CC JUMP .Lifound_victim; | ||
161 | CC = BITTST(R0,1); /* but a locked entry isn't */ | ||
162 | IF CC JUMP .Licheck_lock; | ||
163 | |||
164 | .Lifound_victim: | ||
165 | #ifdef CONFIG_CPLB_INFO | ||
166 | R7 = [P0 - 0x104]; | ||
167 | P2.L = _ipdt_table; | ||
168 | P2.H = _ipdt_table; | ||
169 | P3.L = _ipdt_swapcount_table; | ||
170 | P3.H = _ipdt_swapcount_table; | ||
171 | P3 += -4; | ||
172 | .Licount: | ||
173 | R2 = [P2]; /* address from config table */ | ||
174 | P2 += 8; | ||
175 | P3 += 8; | ||
176 | CC = R2==-1; | ||
177 | IF CC JUMP .Licount_done; | ||
178 | CC = R7==R2; | ||
179 | IF !CC JUMP .Licount; | ||
180 | R7 = [P3]; | ||
181 | R7 += 1; | ||
182 | [P3] = R7; | ||
183 | CSYNC; | ||
184 | .Licount_done: | ||
185 | #endif | ||
186 | LC0=R3; | ||
187 | LSETUP(.Lis_move,.Lie_move) LC0; | ||
188 | .Lis_move: | ||
189 | R0 = [P0]; | ||
190 | [P0 - 4] = R0; | ||
191 | R0 = [P0 - 0x100]; | ||
192 | [P0-0x104] = R0; | ||
193 | .Lie_move: | ||
194 | P0+=4; | ||
195 | |||
196 | /* Clear ICPLB_DATA15, in case we don't find a replacement | ||
197 | * otherwise, we would have a duplicate entry, and will crash | ||
198 | */ | ||
199 | R0 = 0; | ||
200 | [P0 - 4] = R0; | ||
201 | |||
202 | /* We've made space in the ICPLB table, so that ICPLB15 | ||
203 | * is now free to be overwritten. Next, we have to determine | ||
204 | * which CPLB we need to install, from the configuration | ||
205 | * table. This is a matter of getting the start-of-page | ||
206 | * addresses and page-lengths from the config table, and | ||
207 | * determining whether the fault address falls within that | ||
208 | * range. | ||
209 | */ | ||
210 | |||
211 | P2.L = _ipdt_table; | ||
212 | P2.H = _ipdt_table; | ||
213 | #ifdef CONFIG_CPLB_INFO | ||
214 | P3.L = _ipdt_swapcount_table; | ||
215 | P3.H = _ipdt_swapcount_table; | ||
216 | P3 += -8; | ||
217 | #endif | ||
218 | P0.L = _page_size_table; | ||
219 | P0.H = _page_size_table; | ||
220 | |||
221 | /* Retrieve our fault address (which may have been advanced | ||
222 | * because the faulting instruction crossed a page boundary). | ||
223 | */ | ||
224 | |||
225 | R0 = I0; | ||
226 | |||
227 | /* An extraction pattern, to get the page-size bits from | ||
228 | * the CPLB data entry. Bits 16-17, so two bits at posn 16. | ||
229 | */ | ||
230 | |||
231 | R1 = ((16<<8)|2); | ||
232 | .Linext: R4 = [P2++]; /* address from config table */ | ||
233 | R2 = [P2++]; /* data from config table */ | ||
234 | #ifdef CONFIG_CPLB_INFO | ||
235 | P3 += 8; | ||
236 | #endif | ||
237 | |||
238 | CC = R4 == -1; /* End of config table*/ | ||
239 | IF CC JUMP .Lno_page_in_table; | ||
240 | |||
241 | /* See if failed address > start address */ | ||
242 | CC = R4 <= R0(IU); | ||
243 | IF !CC JUMP .Linext; | ||
244 | |||
245 | /* extract page size (17:16)*/ | ||
246 | R3 = EXTRACT(R2, R1.L) (Z); | ||
247 | |||
248 | /* add page size to addr to get range */ | ||
249 | |||
250 | P5 = R3; | ||
251 | P5 = P0 + (P5 << 2); /* scaled, for int access*/ | ||
252 | R3 = [P5]; | ||
253 | R3 = R3 + R4; | ||
254 | |||
255 | /* See if failed address < (start address + page size) */ | ||
256 | CC = R0 < R3(IU); | ||
257 | IF !CC JUMP .Linext; | ||
258 | |||
259 | /* We've found a CPLB in the config table that covers | ||
260 | * the faulting address, so install this CPLB into the | ||
261 | * last entry of the table. | ||
262 | */ | ||
263 | |||
264 | P1.L = LO(ICPLB_DATA15); /* ICPLB_DATA15 */ | ||
265 | P1.H = HI(ICPLB_DATA15); | ||
266 | [P1] = R2; | ||
267 | [P1-0x100] = R4; | ||
268 | #ifdef CONFIG_CPLB_INFO | ||
269 | R3 = [P3]; | ||
270 | R3 += 1; | ||
271 | [P3] = R3; | ||
272 | #endif | ||
273 | |||
274 | /* P4 points to IMEM_CONTROL, and R5 contains its old | ||
275 | * value, after we disabled ICPLBS. Re-enable them. | ||
276 | */ | ||
277 | |||
278 | BITSET(R5,ENICPLB_P); | ||
279 | CLI R2; | ||
280 | SSYNC; /* SSYNC required before writing to IMEM_CONTROL. */ | ||
281 | .align 8; | ||
282 | [P4] = R5; | ||
283 | SSYNC; | ||
284 | STI R2; | ||
285 | |||
286 | ( R7:4,P5:3 ) = [SP++]; | ||
287 | R0 = CPLB_RELOADED; | ||
288 | RTS; | ||
289 | |||
290 | /* FAILED CASES*/ | ||
291 | .Lno_page_in_table: | ||
292 | R0 = CPLB_NO_ADDR_MATCH; | ||
293 | JUMP .Lfail_ret; | ||
294 | |||
295 | .Lall_locked: | ||
296 | R0 = CPLB_NO_UNLOCKED; | ||
297 | JUMP .Lfail_ret; | ||
298 | |||
299 | .Lprot_violation: | ||
300 | R0 = CPLB_PROT_VIOL; | ||
301 | |||
302 | .Lfail_ret: | ||
303 | /* Make sure we turn protection/cache back on, even in the failing case */ | ||
304 | BITSET(R5,ENICPLB_P); | ||
305 | CLI R2; | ||
306 | SSYNC; /* SSYNC required before writing to IMEM_CONTROL. */ | ||
307 | .align 8; | ||
308 | [P4] = R5; | ||
309 | SSYNC; | ||
310 | STI R2; | ||
311 | |||
312 | ( R7:4,P5:3 ) = [SP++]; | ||
313 | RTS; | ||
314 | |||
315 | .Ldcplb_write: | ||
316 | |||
317 | /* if a DCPLB is marked as write-back (CPLB_WT==0), and | ||
318 | * it is clean (CPLB_DIRTY==0), then a write to the | ||
319 | * CPLB's page triggers a protection violation. We have to | ||
320 | * mark the CPLB as dirty, to indicate that there are | ||
321 | * pending writes associated with the CPLB. | ||
322 | */ | ||
323 | |||
324 | P4.L = LO(DCPLB_STATUS); | ||
325 | P4.H = HI(DCPLB_STATUS); | ||
326 | P3.L = LO(DCPLB_DATA0); | ||
327 | P3.H = HI(DCPLB_DATA0); | ||
328 | R5 = [P4]; | ||
329 | |||
330 | /* A protection violation can be caused by more than just writes | ||
331 | * to a clean WB page, so we have to ensure that: | ||
332 | * - It's a write | ||
333 | * - to a clean WB page | ||
334 | * - and is allowed in the mode the access occurred. | ||
335 | */ | ||
336 | |||
337 | CC = BITTST(R5, 16); /* ensure it was a write*/ | ||
338 | IF !CC JUMP .Lprot_violation; | ||
339 | |||
340 | /* to check the rest, we have to retrieve the DCPLB.*/ | ||
341 | |||
342 | /* The low half of DCPLB_STATUS is a bit mask*/ | ||
343 | |||
344 | R2 = R5.L (Z); /* indicating which CPLB triggered the event.*/ | ||
345 | R3 = 30; /* so we can use this to determine the offset*/ | ||
346 | R2.L = SIGNBITS R2; | ||
347 | R2 = R2.L (Z); /* into the DCPLB table.*/ | ||
348 | R3 = R3 - R2; | ||
349 | P4 = R3; | ||
350 | P3 = P3 + (P4<<2); | ||
351 | R3 = [P3]; /* Retrieve the CPLB*/ | ||
352 | |||
353 | /* Now we can check whether it's a clean WB page*/ | ||
354 | |||
355 | CC = BITTST(R3, 14); /* 0==WB, 1==WT*/ | ||
356 | IF CC JUMP .Lprot_violation; | ||
357 | CC = BITTST(R3, 7); /* 0 == clean, 1 == dirty*/ | ||
358 | IF CC JUMP .Lprot_violation; | ||
359 | |||
360 | /* Check whether the write is allowed in the mode that was active.*/ | ||
361 | |||
362 | R2 = 1<<3; /* checking write in user mode*/ | ||
363 | CC = BITTST(R5, 17); /* 0==was user, 1==was super*/ | ||
364 | R5 = CC; | ||
365 | R2 <<= R5; /* if was super, check write in super mode*/ | ||
366 | R2 = R3 & R2; | ||
367 | CC = R2 == 0; | ||
368 | IF CC JUMP .Lprot_violation; | ||
369 | |||
370 | /* It's a genuine write-to-clean-page.*/ | ||
371 | |||
372 | BITSET(R3, 7); /* mark as dirty*/ | ||
373 | [P3] = R3; /* and write back.*/ | ||
374 | NOP; | ||
375 | CSYNC; | ||
376 | ( R7:4,P5:3 ) = [SP++]; | ||
377 | R0 = CPLB_RELOADED; | ||
378 | RTS; | ||
379 | |||
380 | .Ldcplb_miss_compare: | ||
381 | |||
382 | /* Data CPLB Miss event. We need to choose a CPLB to | ||
383 | * evict, and then locate a new CPLB to install from the | ||
384 | * config table, that covers the faulting address. | ||
385 | */ | ||
386 | |||
387 | P1.L = LO(DCPLB_DATA15); | ||
388 | P1.H = HI(DCPLB_DATA15); | ||
389 | |||
390 | P4.L = LO(DCPLB_FAULT_ADDR); | ||
391 | P4.H = HI(DCPLB_FAULT_ADDR); | ||
392 | R4 = [P4]; | ||
393 | I0 = R4; | ||
394 | |||
395 | /* The replacement procedure for DCPLBs*/ | ||
396 | |||
397 | R6 = R1; /* Save for later*/ | ||
398 | |||
399 | /* Turn off CPLBs while we work.*/ | ||
400 | P4.L = LO(DMEM_CONTROL); | ||
401 | P4.H = HI(DMEM_CONTROL); | ||
402 | R5 = [P4]; | ||
403 | BITCLR(R5,ENDCPLB_P); | ||
404 | CLI R0; | ||
405 | SSYNC; /* SSYNC required before writing to DMEM_CONTROL. */ | ||
406 | .align 8; | ||
407 | [P4] = R5; | ||
408 | SSYNC; | ||
409 | STI R0; | ||
410 | |||
411 | /* Start looking for a CPLB to evict. Our order of preference | ||
412 | * is: invalid CPLBs, clean CPLBs, dirty CPLBs. Locked CPLBs | ||
413 | * are no good. | ||
414 | */ | ||
415 | |||
416 | I1.L = LO(DCPLB_DATA0); | ||
417 | I1.H = HI(DCPLB_DATA0); | ||
418 | P1 = 2; | ||
419 | P2 = 16; | ||
420 | I2.L = _dcplb_preference; | ||
421 | I2.H = _dcplb_preference; | ||
422 | LSETUP(.Lsdsearch1, .Ledsearch1) LC0 = P1; | ||
423 | .Lsdsearch1: | ||
424 | R0 = [I2++]; /* Get the bits we're interested in*/ | ||
425 | P0 = I1; /* Go back to start of table*/ | ||
426 | LSETUP (.Lsdsearch2, .Ledsearch2) LC1 = P2; | ||
427 | .Lsdsearch2: | ||
428 | R1 = [P0++]; /* Fetch each installed CPLB in turn*/ | ||
429 | R2 = R1 & R0; /* and test for interesting bits.*/ | ||
430 | CC = R2 == 0; /* If none are set, it'll do.*/ | ||
431 | IF !CC JUMP .Lskip_stack_check; | ||
432 | |||
433 | R2 = [P0 - 0x104]; /* R2 - PageStart */ | ||
434 | P3.L = _page_size_table; /* retrieve end address */ | ||
435 | P3.H = _page_size_table; /* retrieve end address */ | ||
436 | R3 = 0x1002; /* 16th - position, 2 bits -length */ | ||
437 | #if ANOMALY_05000209 | ||
438 | nop; /* Anomaly 05000209 */ | ||
439 | #endif | ||
440 | R7 = EXTRACT(R1,R3.l); | ||
441 | R7 = R7 << 2; /* Page size index offset */ | ||
442 | P5 = R7; | ||
443 | P3 = P3 + P5; | ||
444 | R7 = [P3]; /* page size in bytes */ | ||
445 | |||
446 | R7 = R2 + R7; /* R7 - PageEnd */ | ||
447 | R4 = SP; /* Test SP is in range */ | ||
448 | |||
449 | CC = R7 < R4; /* if PageEnd < SP */ | ||
450 | IF CC JUMP .Ldfound_victim; | ||
451 | R3 = 0x284; /* stack length from start of trap till | ||
452 | * the point. | ||
453 | * 20 stack locations for future modifications | ||
454 | */ | ||
455 | R4 = R4 + R3; | ||
456 | CC = R4 < R2; /* if SP + stacklen < PageStart */ | ||
457 | IF CC JUMP .Ldfound_victim; | ||
458 | .Lskip_stack_check: | ||
459 | |||
460 | .Ledsearch2: NOP; | ||
461 | .Ledsearch1: NOP; | ||
462 | |||
463 | /* If we got here, we didn't find a DCPLB we considered | ||
464 | * replacable, which means all of them were locked. | ||
465 | */ | ||
466 | |||
467 | JUMP .Lall_locked; | ||
468 | .Ldfound_victim: | ||
469 | |||
470 | #ifdef CONFIG_CPLB_INFO | ||
471 | R7 = [P0 - 0x104]; | ||
472 | P2.L = _dpdt_table; | ||
473 | P2.H = _dpdt_table; | ||
474 | P3.L = _dpdt_swapcount_table; | ||
475 | P3.H = _dpdt_swapcount_table; | ||
476 | P3 += -4; | ||
477 | .Ldicount: | ||
478 | R2 = [P2]; | ||
479 | P2 += 8; | ||
480 | P3 += 8; | ||
481 | CC = R2==-1; | ||
482 | IF CC JUMP .Ldicount_done; | ||
483 | CC = R7==R2; | ||
484 | IF !CC JUMP .Ldicount; | ||
485 | R7 = [P3]; | ||
486 | R7 += 1; | ||
487 | [P3] = R7; | ||
488 | .Ldicount_done: | ||
489 | #endif | ||
490 | |||
491 | /* Clean down the hardware loops*/ | ||
492 | R2 = 0; | ||
493 | LC1 = R2; | ||
494 | LC0 = R2; | ||
495 | |||
496 | /* There's a suitable victim in [P0-4] (because we've | ||
497 | * advanced already). | ||
498 | */ | ||
499 | |||
500 | .LDdoverwrite: | ||
501 | |||
502 | /* [P0-4] is a suitable victim CPLB, so we want to | ||
503 | * overwrite it by moving all the following CPLBs | ||
504 | * one space closer to the start. | ||
505 | */ | ||
506 | |||
507 | R1.L = LO(DCPLB_DATA16); /* DCPLB_DATA15 + 4 */ | ||
508 | R1.H = HI(DCPLB_DATA16); | ||
509 | R0 = P0; | ||
510 | |||
511 | /* If the victim happens to be in DCPLB15, | ||
512 | * we don't need to move anything. | ||
513 | */ | ||
514 | |||
515 | CC = R1 == R0; | ||
516 | IF CC JUMP .Lde_moved; | ||
517 | R1 = R1 - R0; | ||
518 | R1 >>= 2; | ||
519 | P1 = R1; | ||
520 | LSETUP(.Lds_move, .Lde_move) LC0=P1; | ||
521 | .Lds_move: | ||
522 | R0 = [P0++]; /* move data */ | ||
523 | [P0 - 8] = R0; | ||
524 | R0 = [P0-0x104] /* move address */ | ||
525 | .Lde_move: | ||
526 | [P0-0x108] = R0; | ||
527 | |||
528 | .Lde_moved: | ||
529 | NOP; | ||
530 | |||
531 | /* Clear DCPLB_DATA15, in case we don't find a replacement | ||
532 | * otherwise, we would have a duplicate entry, and will crash | ||
533 | */ | ||
534 | R0 = 0; | ||
535 | [P0 - 0x4] = R0; | ||
536 | |||
537 | /* We've now made space in DCPLB15 for the new CPLB to be | ||
538 | * installed. The next stage is to locate a CPLB in the | ||
539 | * config table that covers the faulting address. | ||
540 | */ | ||
541 | |||
542 | R0 = I0; /* Our faulting address */ | ||
543 | |||
544 | P2.L = _dpdt_table; | ||
545 | P2.H = _dpdt_table; | ||
546 | #ifdef CONFIG_CPLB_INFO | ||
547 | P3.L = _dpdt_swapcount_table; | ||
548 | P3.H = _dpdt_swapcount_table; | ||
549 | P3 += -8; | ||
550 | #endif | ||
551 | |||
552 | P1.L = _page_size_table; | ||
553 | P1.H = _page_size_table; | ||
554 | |||
555 | /* An extraction pattern, to retrieve bits 17:16.*/ | ||
556 | |||
557 | R1 = (16<<8)|2; | ||
558 | .Ldnext: R4 = [P2++]; /* address */ | ||
559 | R2 = [P2++]; /* data */ | ||
560 | #ifdef CONFIG_CPLB_INFO | ||
561 | P3 += 8; | ||
562 | #endif | ||
563 | |||
564 | CC = R4 == -1; | ||
565 | IF CC JUMP .Lno_page_in_table; | ||
566 | |||
567 | /* See if failed address > start address */ | ||
568 | CC = R4 <= R0(IU); | ||
569 | IF !CC JUMP .Ldnext; | ||
570 | |||
571 | /* extract page size (17:16)*/ | ||
572 | R3 = EXTRACT(R2, R1.L) (Z); | ||
573 | |||
574 | /* add page size to addr to get range */ | ||
575 | |||
576 | P5 = R3; | ||
577 | P5 = P1 + (P5 << 2); | ||
578 | R3 = [P5]; | ||
579 | R3 = R3 + R4; | ||
580 | |||
581 | /* See if failed address < (start address + page size) */ | ||
582 | CC = R0 < R3(IU); | ||
583 | IF !CC JUMP .Ldnext; | ||
584 | |||
585 | /* We've found the CPLB that should be installed, so | ||
586 | * write it into CPLB15, masking off any caching bits | ||
587 | * if necessary. | ||
588 | */ | ||
589 | |||
590 | P1.L = LO(DCPLB_DATA15); | ||
591 | P1.H = HI(DCPLB_DATA15); | ||
592 | |||
593 | /* If the DCPLB has cache bits set, but caching hasn't | ||
594 | * been enabled, then we want to mask off the cache-in-L1 | ||
595 | * bit before installing. Moreover, if caching is off, we | ||
596 | * also want to ensure that the DCPLB has WT mode set, rather | ||
597 | * than WB, since WB pages still trigger first-write exceptions | ||
598 | * even when not caching is off, and the page isn't marked as | ||
599 | * cachable. Finally, we could mark the page as clean, not dirty, | ||
600 | * but we choose to leave that decision to the user; if the user | ||
601 | * chooses to have a CPLB pre-defined as dirty, then they always | ||
602 | * pay the cost of flushing during eviction, but don't pay the | ||
603 | * cost of first-write exceptions to mark the page as dirty. | ||
604 | */ | ||
605 | |||
606 | #ifdef CONFIG_BFIN_WT | ||
607 | BITSET(R6, 14); /* Set WT*/ | ||
608 | #endif | ||
609 | |||
610 | [P1] = R2; | ||
611 | [P1-0x100] = R4; | ||
612 | #ifdef CONFIG_CPLB_INFO | ||
613 | R3 = [P3]; | ||
614 | R3 += 1; | ||
615 | [P3] = R3; | ||
616 | #endif | ||
617 | |||
618 | /* We've installed the CPLB, so re-enable CPLBs. P4 | ||
619 | * points to DMEM_CONTROL, and R5 is the value we | ||
620 | * last wrote to it, when we were disabling CPLBs. | ||
621 | */ | ||
622 | |||
623 | BITSET(R5,ENDCPLB_P); | ||
624 | CLI R2; | ||
625 | .align 8; | ||
626 | [P4] = R5; | ||
627 | SSYNC; | ||
628 | STI R2; | ||
629 | |||
630 | ( R7:4,P5:3 ) = [SP++]; | ||
631 | R0 = CPLB_RELOADED; | ||
632 | RTS; | ||
633 | ENDPROC(_cplb_mgr) | ||
634 | |||
635 | .data | ||
636 | .align 4; | ||
637 | _page_size_table: | ||
638 | .byte4 0x00000400; /* 1K */ | ||
639 | .byte4 0x00001000; /* 4K */ | ||
640 | .byte4 0x00100000; /* 1M */ | ||
641 | .byte4 0x00400000; /* 4M */ | ||
642 | |||
643 | .align 4; | ||
644 | _dcplb_preference: | ||
645 | .byte4 0x00000001; /* valid bit */ | ||
646 | .byte4 0x00000002; /* lock bit */ | ||
diff --git a/arch/blackfin/kernel/cplb-nompu/cplbmgr.c b/arch/blackfin/kernel/cplb-nompu/cplbmgr.c new file mode 100644 index 000000000000..376249ab2694 --- /dev/null +++ b/arch/blackfin/kernel/cplb-nompu/cplbmgr.c | |||
@@ -0,0 +1,283 @@ | |||
1 | /* | ||
2 | * File: arch/blackfin/kernel/cplb-nompu-c/cplbmgr.c | ||
3 | * Based on: arch/blackfin/kernel/cplb-mpu/cplbmgr.c | ||
4 | * Author: Michael McTernan <mmcternan@airvana.com> | ||
5 | * | ||
6 | * Created: 01Nov2008 | ||
7 | * Description: CPLB miss handler. | ||
8 | * | ||
9 | * Modified: | ||
10 | * Copyright 2008 Airvana Inc. | ||
11 | * Copyright 2004-2007 Analog Devices Inc. | ||
12 | * | ||
13 | * Bugs: Enter bugs at http://blackfin.uclinux.org/ | ||
14 | * | ||
15 | * This program is free software; you can redistribute it and/or modify | ||
16 | * it under the terms of the GNU General Public License as published by | ||
17 | * the Free Software Foundation; either version 2 of the License, or | ||
18 | * (at your option) any later version. | ||
19 | * | ||
20 | * This program is distributed in the hope that it will be useful, | ||
21 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | ||
22 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | ||
23 | * GNU General Public License for more details. | ||
24 | */ | ||
25 | |||
26 | #include <linux/kernel.h> | ||
27 | #include <asm/blackfin.h> | ||
28 | #include <asm/cplbinit.h> | ||
29 | #include <asm/cplb.h> | ||
30 | #include <asm/mmu_context.h> | ||
31 | |||
32 | /* | ||
33 | * WARNING | ||
34 | * | ||
35 | * This file is compiled with certain -ffixed-reg options. We have to | ||
36 | * make sure not to call any functions here that could clobber these | ||
37 | * registers. | ||
38 | */ | ||
39 | |||
40 | int nr_dcplb_miss[NR_CPUS], nr_icplb_miss[NR_CPUS]; | ||
41 | int nr_dcplb_supv_miss[NR_CPUS], nr_icplb_supv_miss[NR_CPUS]; | ||
42 | int nr_cplb_flush[NR_CPUS], nr_dcplb_prot[NR_CPUS]; | ||
43 | |||
44 | #ifdef CONFIG_EXCPT_IRQ_SYSC_L1 | ||
45 | #define MGR_ATTR __attribute__((l1_text)) | ||
46 | #else | ||
47 | #define MGR_ATTR | ||
48 | #endif | ||
49 | |||
50 | /* | ||
51 | * We're in an exception handler. The normal cli nop nop workaround | ||
52 | * isn't going to do very much, as the only thing that can interrupt | ||
53 | * us is an NMI, and the cli isn't going to stop that. | ||
54 | */ | ||
55 | #define NOWA_SSYNC __asm__ __volatile__ ("ssync;") | ||
56 | |||
57 | /* Anomaly handlers provide SSYNCs, so avoid extra if anomaly is present */ | ||
58 | #if ANOMALY_05000125 | ||
59 | |||
60 | #define bfin_write_DMEM_CONTROL_SSYNC(v) bfin_write_DMEM_CONTROL(v) | ||
61 | #define bfin_write_IMEM_CONTROL_SSYNC(v) bfin_write_IMEM_CONTROL(v) | ||
62 | |||
63 | #else | ||
64 | |||
65 | #define bfin_write_DMEM_CONTROL_SSYNC(v) \ | ||
66 | do { NOWA_SSYNC; bfin_write_DMEM_CONTROL(v); NOWA_SSYNC; } while (0) | ||
67 | #define bfin_write_IMEM_CONTROL_SSYNC(v) \ | ||
68 | do { NOWA_SSYNC; bfin_write_IMEM_CONTROL(v); NOWA_SSYNC; } while (0) | ||
69 | |||
70 | #endif | ||
71 | |||
72 | static inline void write_dcplb_data(int cpu, int idx, unsigned long data, | ||
73 | unsigned long addr) | ||
74 | { | ||
75 | unsigned long ctrl = bfin_read_DMEM_CONTROL(); | ||
76 | bfin_write_DMEM_CONTROL_SSYNC(ctrl & ~ENDCPLB); | ||
77 | bfin_write32(DCPLB_DATA0 + idx * 4, data); | ||
78 | bfin_write32(DCPLB_ADDR0 + idx * 4, addr); | ||
79 | bfin_write_DMEM_CONTROL_SSYNC(ctrl); | ||
80 | |||
81 | #ifdef CONFIG_CPLB_INFO | ||
82 | dcplb_tbl[cpu][idx].addr = addr; | ||
83 | dcplb_tbl[cpu][idx].data = data; | ||
84 | #endif | ||
85 | } | ||
86 | |||
87 | static inline void write_icplb_data(int cpu, int idx, unsigned long data, | ||
88 | unsigned long addr) | ||
89 | { | ||
90 | unsigned long ctrl = bfin_read_IMEM_CONTROL(); | ||
91 | |||
92 | bfin_write_IMEM_CONTROL_SSYNC(ctrl & ~ENICPLB); | ||
93 | bfin_write32(ICPLB_DATA0 + idx * 4, data); | ||
94 | bfin_write32(ICPLB_ADDR0 + idx * 4, addr); | ||
95 | bfin_write_IMEM_CONTROL_SSYNC(ctrl); | ||
96 | |||
97 | #ifdef CONFIG_CPLB_INFO | ||
98 | icplb_tbl[cpu][idx].addr = addr; | ||
99 | icplb_tbl[cpu][idx].data = data; | ||
100 | #endif | ||
101 | } | ||
102 | |||
103 | /* | ||
104 | * Given the contents of the status register, return the index of the | ||
105 | * CPLB that caused the fault. | ||
106 | */ | ||
107 | static inline int faulting_cplb_index(int status) | ||
108 | { | ||
109 | int signbits = __builtin_bfin_norm_fr1x32(status & 0xFFFF); | ||
110 | return 30 - signbits; | ||
111 | } | ||
112 | |||
113 | /* | ||
114 | * Given the contents of the status register and the DCPLB_DATA contents, | ||
115 | * return true if a write access should be permitted. | ||
116 | */ | ||
117 | static inline int write_permitted(int status, unsigned long data) | ||
118 | { | ||
119 | if (status & FAULT_USERSUPV) | ||
120 | return !!(data & CPLB_SUPV_WR); | ||
121 | else | ||
122 | return !!(data & CPLB_USER_WR); | ||
123 | } | ||
124 | |||
125 | /* Counters to implement round-robin replacement. */ | ||
126 | static int icplb_rr_index[NR_CPUS] PDT_ATTR; | ||
127 | static int dcplb_rr_index[NR_CPUS] PDT_ATTR; | ||
128 | |||
129 | /* | ||
130 | * Find an ICPLB entry to be evicted and return its index. | ||
131 | */ | ||
132 | static int evict_one_icplb(int cpu) | ||
133 | { | ||
134 | int i = first_switched_icplb + icplb_rr_index[cpu]; | ||
135 | if (i >= MAX_CPLBS) { | ||
136 | i -= MAX_CPLBS - first_switched_icplb; | ||
137 | icplb_rr_index[cpu] -= MAX_CPLBS - first_switched_icplb; | ||
138 | } | ||
139 | icplb_rr_index[cpu]++; | ||
140 | return i; | ||
141 | } | ||
142 | |||
143 | static int evict_one_dcplb(int cpu) | ||
144 | { | ||
145 | int i = first_switched_dcplb + dcplb_rr_index[cpu]; | ||
146 | if (i >= MAX_CPLBS) { | ||
147 | i -= MAX_CPLBS - first_switched_dcplb; | ||
148 | dcplb_rr_index[cpu] -= MAX_CPLBS - first_switched_dcplb; | ||
149 | } | ||
150 | dcplb_rr_index[cpu]++; | ||
151 | return i; | ||
152 | } | ||
153 | |||
154 | MGR_ATTR static int icplb_miss(int cpu) | ||
155 | { | ||
156 | unsigned long addr = bfin_read_ICPLB_FAULT_ADDR(); | ||
157 | int status = bfin_read_ICPLB_STATUS(); | ||
158 | int idx; | ||
159 | unsigned long i_data, base, addr1, eaddr; | ||
160 | |||
161 | nr_icplb_miss[cpu]++; | ||
162 | if (unlikely(status & FAULT_USERSUPV)) | ||
163 | nr_icplb_supv_miss[cpu]++; | ||
164 | |||
165 | base = 0; | ||
166 | for (idx = 0; idx < icplb_nr_bounds; idx++) { | ||
167 | eaddr = icplb_bounds[idx].eaddr; | ||
168 | if (addr < eaddr) | ||
169 | break; | ||
170 | base = eaddr; | ||
171 | } | ||
172 | if (unlikely(idx == icplb_nr_bounds)) | ||
173 | return CPLB_NO_ADDR_MATCH; | ||
174 | |||
175 | i_data = icplb_bounds[idx].data; | ||
176 | if (unlikely(i_data == 0)) | ||
177 | return CPLB_NO_ADDR_MATCH; | ||
178 | |||
179 | addr1 = addr & ~(SIZE_4M - 1); | ||
180 | addr &= ~(SIZE_1M - 1); | ||
181 | i_data |= PAGE_SIZE_1MB; | ||
182 | if (addr1 >= base && (addr1 + SIZE_4M) <= eaddr) { | ||
183 | /* | ||
184 | * This works because | ||
185 | * (PAGE_SIZE_4MB & PAGE_SIZE_1MB) == PAGE_SIZE_1MB. | ||
186 | */ | ||
187 | i_data |= PAGE_SIZE_4MB; | ||
188 | addr = addr1; | ||
189 | } | ||
190 | |||
191 | /* Pick entry to evict */ | ||
192 | idx = evict_one_icplb(cpu); | ||
193 | |||
194 | write_icplb_data(cpu, idx, i_data, addr); | ||
195 | |||
196 | return CPLB_RELOADED; | ||
197 | } | ||
198 | |||
199 | MGR_ATTR static int dcplb_miss(int cpu) | ||
200 | { | ||
201 | unsigned long addr = bfin_read_DCPLB_FAULT_ADDR(); | ||
202 | int status = bfin_read_DCPLB_STATUS(); | ||
203 | int idx; | ||
204 | unsigned long d_data, base, addr1, eaddr; | ||
205 | |||
206 | nr_dcplb_miss[cpu]++; | ||
207 | if (unlikely(status & FAULT_USERSUPV)) | ||
208 | nr_dcplb_supv_miss[cpu]++; | ||
209 | |||
210 | base = 0; | ||
211 | for (idx = 0; idx < dcplb_nr_bounds; idx++) { | ||
212 | eaddr = dcplb_bounds[idx].eaddr; | ||
213 | if (addr < eaddr) | ||
214 | break; | ||
215 | base = eaddr; | ||
216 | } | ||
217 | if (unlikely(idx == dcplb_nr_bounds)) | ||
218 | return CPLB_NO_ADDR_MATCH; | ||
219 | |||
220 | d_data = dcplb_bounds[idx].data; | ||
221 | if (unlikely(d_data == 0)) | ||
222 | return CPLB_NO_ADDR_MATCH; | ||
223 | |||
224 | addr1 = addr & ~(SIZE_4M - 1); | ||
225 | addr &= ~(SIZE_1M - 1); | ||
226 | d_data |= PAGE_SIZE_1MB; | ||
227 | if (addr1 >= base && (addr1 + SIZE_4M) <= eaddr) { | ||
228 | /* | ||
229 | * This works because | ||
230 | * (PAGE_SIZE_4MB & PAGE_SIZE_1MB) == PAGE_SIZE_1MB. | ||
231 | */ | ||
232 | d_data |= PAGE_SIZE_4MB; | ||
233 | addr = addr1; | ||
234 | } | ||
235 | |||
236 | /* Pick entry to evict */ | ||
237 | idx = evict_one_dcplb(cpu); | ||
238 | |||
239 | write_dcplb_data(cpu, idx, d_data, addr); | ||
240 | |||
241 | return CPLB_RELOADED; | ||
242 | } | ||
243 | |||
244 | MGR_ATTR static noinline int dcplb_protection_fault(int cpu) | ||
245 | { | ||
246 | int status = bfin_read_DCPLB_STATUS(); | ||
247 | |||
248 | nr_dcplb_prot[cpu]++; | ||
249 | |||
250 | if (likely(status & FAULT_RW)) { | ||
251 | int idx = faulting_cplb_index(status); | ||
252 | unsigned long regaddr = DCPLB_DATA0 + idx * 4; | ||
253 | unsigned long data = bfin_read32(regaddr); | ||
254 | |||
255 | /* Check if fault is to dirty a clean page */ | ||
256 | if (!(data & CPLB_WT) && !(data & CPLB_DIRTY) && | ||
257 | write_permitted(status, data)) { | ||
258 | |||
259 | dcplb_tbl[cpu][idx].data = data; | ||
260 | bfin_write32(regaddr, data); | ||
261 | return CPLB_RELOADED; | ||
262 | } | ||
263 | } | ||
264 | |||
265 | return CPLB_PROT_VIOL; | ||
266 | } | ||
267 | |||
268 | MGR_ATTR int cplb_hdr(int seqstat, struct pt_regs *regs) | ||
269 | { | ||
270 | int cause = seqstat & 0x3f; | ||
271 | unsigned int cpu = smp_processor_id(); | ||
272 | switch (cause) { | ||
273 | case 0x2C: | ||
274 | return icplb_miss(cpu); | ||
275 | case 0x26: | ||
276 | return dcplb_miss(cpu); | ||
277 | default: | ||
278 | if (unlikely(cause == 0x23)) | ||
279 | return dcplb_protection_fault(cpu); | ||
280 | |||
281 | return CPLB_UNKNOWN_ERR; | ||
282 | } | ||
283 | } | ||
diff --git a/arch/blackfin/kernel/cplbinfo.c b/arch/blackfin/kernel/cplbinfo.c new file mode 100644 index 000000000000..64d78300dd08 --- /dev/null +++ b/arch/blackfin/kernel/cplbinfo.c | |||
@@ -0,0 +1,177 @@ | |||
1 | /* | ||
2 | * arch/blackfin/kernel/cplbinfo.c - display CPLB status | ||
3 | * | ||
4 | * Copyright 2004-2008 Analog Devices Inc. | ||
5 | * Licensed under the GPL-2 or later. | ||
6 | */ | ||
7 | |||
8 | #include <linux/ctype.h> | ||
9 | #include <linux/module.h> | ||
10 | #include <linux/kernel.h> | ||
11 | #include <linux/init.h> | ||
12 | #include <linux/proc_fs.h> | ||
13 | #include <linux/seq_file.h> | ||
14 | #include <linux/uaccess.h> | ||
15 | |||
16 | #include <asm/cplbinit.h> | ||
17 | #include <asm/blackfin.h> | ||
18 | |||
19 | static char const page_strtbl[][3] = { "1K", "4K", "1M", "4M" }; | ||
20 | #define page(flags) (((flags) & 0x30000) >> 16) | ||
21 | #define strpage(flags) page_strtbl[page(flags)] | ||
22 | |||
23 | struct cplbinfo_data { | ||
24 | loff_t pos; | ||
25 | char cplb_type; | ||
26 | u32 mem_control; | ||
27 | struct cplb_entry *tbl; | ||
28 | int switched; | ||
29 | }; | ||
30 | |||
31 | static void cplbinfo_print_header(struct seq_file *m) | ||
32 | { | ||
33 | seq_printf(m, "Index\tAddress\t\tData\tSize\tU/RD\tU/WR\tS/WR\tSwitch\n"); | ||
34 | } | ||
35 | |||
36 | static int cplbinfo_nomore(struct cplbinfo_data *cdata) | ||
37 | { | ||
38 | return cdata->pos >= MAX_CPLBS; | ||
39 | } | ||
40 | |||
41 | static int cplbinfo_show(struct seq_file *m, void *p) | ||
42 | { | ||
43 | struct cplbinfo_data *cdata; | ||
44 | unsigned long data, addr; | ||
45 | loff_t pos; | ||
46 | |||
47 | cdata = p; | ||
48 | pos = cdata->pos; | ||
49 | addr = cdata->tbl[pos].addr; | ||
50 | data = cdata->tbl[pos].data; | ||
51 | |||
52 | seq_printf(m, | ||
53 | "%d\t0x%08lx\t%05lx\t%s\t%c\t%c\t%c\t%c\n", | ||
54 | (int)pos, addr, data, strpage(data), | ||
55 | (data & CPLB_USER_RD) ? 'Y' : 'N', | ||
56 | (data & CPLB_USER_WR) ? 'Y' : 'N', | ||
57 | (data & CPLB_SUPV_WR) ? 'Y' : 'N', | ||
58 | pos < cdata->switched ? 'N' : 'Y'); | ||
59 | |||
60 | return 0; | ||
61 | } | ||
62 | |||
63 | static void cplbinfo_seq_init(struct cplbinfo_data *cdata, unsigned int cpu) | ||
64 | { | ||
65 | if (cdata->cplb_type == 'I') { | ||
66 | cdata->mem_control = bfin_read_IMEM_CONTROL(); | ||
67 | cdata->tbl = icplb_tbl[cpu]; | ||
68 | cdata->switched = first_switched_icplb; | ||
69 | } else { | ||
70 | cdata->mem_control = bfin_read_DMEM_CONTROL(); | ||
71 | cdata->tbl = dcplb_tbl[cpu]; | ||
72 | cdata->switched = first_switched_dcplb; | ||
73 | } | ||
74 | } | ||
75 | |||
76 | static void *cplbinfo_start(struct seq_file *m, loff_t *pos) | ||
77 | { | ||
78 | struct cplbinfo_data *cdata = m->private; | ||
79 | |||
80 | if (!*pos) { | ||
81 | seq_printf(m, "%cCPLBs are %sabled: 0x%x\n", cdata->cplb_type, | ||
82 | (cdata->mem_control & ENDCPLB ? "en" : "dis"), | ||
83 | cdata->mem_control); | ||
84 | cplbinfo_print_header(m); | ||
85 | } else if (cplbinfo_nomore(cdata)) | ||
86 | return NULL; | ||
87 | |||
88 | get_cpu(); | ||
89 | return cdata; | ||
90 | } | ||
91 | |||
92 | static void *cplbinfo_next(struct seq_file *m, void *p, loff_t *pos) | ||
93 | { | ||
94 | struct cplbinfo_data *cdata = p; | ||
95 | cdata->pos = ++(*pos); | ||
96 | if (cplbinfo_nomore(cdata)) | ||
97 | return NULL; | ||
98 | else | ||
99 | return cdata; | ||
100 | } | ||
101 | |||
102 | static void cplbinfo_stop(struct seq_file *m, void *p) | ||
103 | { | ||
104 | put_cpu(); | ||
105 | } | ||
106 | |||
107 | static const struct seq_operations cplbinfo_sops = { | ||
108 | .start = cplbinfo_start, | ||
109 | .next = cplbinfo_next, | ||
110 | .stop = cplbinfo_stop, | ||
111 | .show = cplbinfo_show, | ||
112 | }; | ||
113 | |||
114 | static int cplbinfo_open(struct inode *inode, struct file *file) | ||
115 | { | ||
116 | char buf[256], *path, *p; | ||
117 | unsigned int cpu; | ||
118 | char *s_cpu, *s_cplb; | ||
119 | int ret; | ||
120 | struct seq_file *m; | ||
121 | struct cplbinfo_data *cdata; | ||
122 | |||
123 | path = d_path(&file->f_path, buf, sizeof(buf)); | ||
124 | if (IS_ERR(path)) | ||
125 | return PTR_ERR(path); | ||
126 | s_cpu = strstr(path, "/cpu"); | ||
127 | s_cplb = strrchr(path, '/'); | ||
128 | if (!s_cpu || !s_cplb) | ||
129 | return -EINVAL; | ||
130 | |||
131 | cpu = simple_strtoul(s_cpu + 4, &p, 10); | ||
132 | if (!cpu_online(cpu)) | ||
133 | return -ENODEV; | ||
134 | |||
135 | ret = seq_open_private(file, &cplbinfo_sops, sizeof(*cdata)); | ||
136 | if (ret) | ||
137 | return ret; | ||
138 | m = file->private_data; | ||
139 | cdata = m->private; | ||
140 | |||
141 | cdata->pos = 0; | ||
142 | cdata->cplb_type = toupper(s_cplb[1]); | ||
143 | cplbinfo_seq_init(cdata, cpu); | ||
144 | |||
145 | return 0; | ||
146 | } | ||
147 | |||
148 | static const struct file_operations cplbinfo_fops = { | ||
149 | .open = cplbinfo_open, | ||
150 | .read = seq_read, | ||
151 | .llseek = seq_lseek, | ||
152 | .release = seq_release_private, | ||
153 | }; | ||
154 | |||
155 | static int __init cplbinfo_init(void) | ||
156 | { | ||
157 | struct proc_dir_entry *cplb_dir, *cpu_dir; | ||
158 | char buf[10]; | ||
159 | unsigned int cpu; | ||
160 | |||
161 | cplb_dir = proc_mkdir("cplbinfo", NULL); | ||
162 | if (!cplb_dir) | ||
163 | return -ENOMEM; | ||
164 | |||
165 | for_each_possible_cpu(cpu) { | ||
166 | sprintf(buf, "cpu%i", cpu); | ||
167 | cpu_dir = proc_mkdir(buf, cplb_dir); | ||
168 | if (!cpu_dir) | ||
169 | return -ENOMEM; | ||
170 | |||
171 | proc_create("icplb", S_IRUGO, cpu_dir, &cplbinfo_fops); | ||
172 | proc_create("dcplb", S_IRUGO, cpu_dir, &cplbinfo_fops); | ||
173 | } | ||
174 | |||
175 | return 0; | ||
176 | } | ||
177 | late_initcall(cplbinfo_init); | ||
diff --git a/arch/blackfin/kernel/early_printk.c b/arch/blackfin/kernel/early_printk.c index 1f4e3d2e0901..c8ad051742e2 100644 --- a/arch/blackfin/kernel/early_printk.c +++ b/arch/blackfin/kernel/early_printk.c | |||
@@ -105,10 +105,10 @@ static struct console * __init earlyserial_init(char *buf) | |||
105 | cflag |= CS5; | 105 | cflag |= CS5; |
106 | break; | 106 | break; |
107 | case 6: | 107 | case 6: |
108 | cflag |= CS5; | 108 | cflag |= CS6; |
109 | break; | 109 | break; |
110 | case 7: | 110 | case 7: |
111 | cflag |= CS5; | 111 | cflag |= CS7; |
112 | break; | 112 | break; |
113 | default: | 113 | default: |
114 | cflag |= CS8; | 114 | cflag |= CS8; |
diff --git a/arch/blackfin/kernel/entry.S b/arch/blackfin/kernel/entry.S index faea88ebb2ef..a9cfba9946b5 100644 --- a/arch/blackfin/kernel/entry.S +++ b/arch/blackfin/kernel/entry.S | |||
@@ -30,6 +30,7 @@ | |||
30 | #include <linux/linkage.h> | 30 | #include <linux/linkage.h> |
31 | #include <asm/thread_info.h> | 31 | #include <asm/thread_info.h> |
32 | #include <asm/errno.h> | 32 | #include <asm/errno.h> |
33 | #include <asm/blackfin.h> | ||
33 | #include <asm/asm-offsets.h> | 34 | #include <asm/asm-offsets.h> |
34 | 35 | ||
35 | #include <asm/context.S> | 36 | #include <asm/context.S> |
@@ -41,6 +42,10 @@ | |||
41 | #endif | 42 | #endif |
42 | 43 | ||
43 | ENTRY(_ret_from_fork) | 44 | ENTRY(_ret_from_fork) |
45 | #ifdef CONFIG_IPIPE | ||
46 | [--sp] = reti; /* IRQs on. */ | ||
47 | SP += 4; | ||
48 | #endif /* CONFIG_IPIPE */ | ||
44 | SP += -12; | 49 | SP += -12; |
45 | call _schedule_tail; | 50 | call _schedule_tail; |
46 | SP += 12; | 51 | SP += 12; |
diff --git a/arch/blackfin/kernel/fixed_code.S b/arch/blackfin/kernel/fixed_code.S index 4b03ba025488..0d2d9e0968c8 100644 --- a/arch/blackfin/kernel/fixed_code.S +++ b/arch/blackfin/kernel/fixed_code.S | |||
@@ -8,10 +8,12 @@ | |||
8 | * BF561 SMP). | 8 | * BF561 SMP). |
9 | */ | 9 | */ |
10 | #include <linux/linkage.h> | 10 | #include <linux/linkage.h> |
11 | #include <linux/init.h> | ||
11 | #include <linux/unistd.h> | 12 | #include <linux/unistd.h> |
12 | #include <asm/entry.h> | 13 | #include <asm/entry.h> |
13 | 14 | ||
14 | .text | 15 | __INIT |
16 | |||
15 | ENTRY(_fixed_code_start) | 17 | ENTRY(_fixed_code_start) |
16 | 18 | ||
17 | .align 16 | 19 | .align 16 |
@@ -144,3 +146,5 @@ ENTRY(_safe_user_instruction) | |||
144 | ENDPROC(_safe_user_instruction) | 146 | ENDPROC(_safe_user_instruction) |
145 | 147 | ||
146 | ENTRY(_fixed_code_end) | 148 | ENTRY(_fixed_code_end) |
149 | |||
150 | __FINIT | ||
diff --git a/arch/blackfin/kernel/ipipe.c b/arch/blackfin/kernel/ipipe.c new file mode 100644 index 000000000000..339be5a3ae6a --- /dev/null +++ b/arch/blackfin/kernel/ipipe.c | |||
@@ -0,0 +1,428 @@ | |||
1 | /* -*- linux-c -*- | ||
2 | * linux/arch/blackfin/kernel/ipipe.c | ||
3 | * | ||
4 | * Copyright (C) 2005-2007 Philippe Gerum. | ||
5 | * | ||
6 | * This program is free software; you can redistribute it and/or modify | ||
7 | * it under the terms of the GNU General Public License as published by | ||
8 | * the Free Software Foundation, Inc., 675 Mass Ave, Cambridge MA 02139, | ||
9 | * USA; either version 2 of the License, or (at your option) any later | ||
10 | * version. | ||
11 | * | ||
12 | * This program is distributed in the hope that it will be useful, | ||
13 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | ||
14 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | ||
15 | * GNU General Public License for more details. | ||
16 | * | ||
17 | * You should have received a copy of the GNU General Public License | ||
18 | * along with this program; if not, write to the Free Software | ||
19 | * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. | ||
20 | * | ||
21 | * Architecture-dependent I-pipe support for the Blackfin. | ||
22 | */ | ||
23 | |||
24 | #include <linux/kernel.h> | ||
25 | #include <linux/sched.h> | ||
26 | #include <linux/module.h> | ||
27 | #include <linux/interrupt.h> | ||
28 | #include <linux/percpu.h> | ||
29 | #include <linux/bitops.h> | ||
30 | #include <linux/slab.h> | ||
31 | #include <linux/errno.h> | ||
32 | #include <linux/kthread.h> | ||
33 | #include <asm/unistd.h> | ||
34 | #include <asm/system.h> | ||
35 | #include <asm/atomic.h> | ||
36 | #include <asm/io.h> | ||
37 | |||
38 | static int create_irq_threads; | ||
39 | |||
40 | DEFINE_PER_CPU(struct pt_regs, __ipipe_tick_regs); | ||
41 | |||
42 | static DEFINE_PER_CPU(unsigned long, pending_irqthread_mask); | ||
43 | |||
44 | static DEFINE_PER_CPU(int [IVG13 + 1], pending_irq_count); | ||
45 | |||
46 | asmlinkage void asm_do_IRQ(unsigned int irq, struct pt_regs *regs); | ||
47 | |||
48 | static void __ipipe_no_irqtail(void); | ||
49 | |||
50 | unsigned long __ipipe_irq_tail_hook = (unsigned long)&__ipipe_no_irqtail; | ||
51 | EXPORT_SYMBOL(__ipipe_irq_tail_hook); | ||
52 | |||
53 | unsigned long __ipipe_core_clock; | ||
54 | EXPORT_SYMBOL(__ipipe_core_clock); | ||
55 | |||
56 | unsigned long __ipipe_freq_scale; | ||
57 | EXPORT_SYMBOL(__ipipe_freq_scale); | ||
58 | |||
59 | atomic_t __ipipe_irq_lvdepth[IVG15 + 1]; | ||
60 | |||
61 | unsigned long __ipipe_irq_lvmask = __all_masked_irq_flags; | ||
62 | EXPORT_SYMBOL(__ipipe_irq_lvmask); | ||
63 | |||
64 | static void __ipipe_ack_irq(unsigned irq, struct irq_desc *desc) | ||
65 | { | ||
66 | desc->ipipe_ack(irq, desc); | ||
67 | } | ||
68 | |||
69 | /* | ||
70 | * __ipipe_enable_pipeline() -- We are running on the boot CPU, hw | ||
71 | * interrupts are off, and secondary CPUs are still lost in space. | ||
72 | */ | ||
73 | void __ipipe_enable_pipeline(void) | ||
74 | { | ||
75 | unsigned irq; | ||
76 | |||
77 | __ipipe_core_clock = get_cclk(); /* Fetch this once. */ | ||
78 | __ipipe_freq_scale = 1000000000UL / __ipipe_core_clock; | ||
79 | |||
80 | for (irq = 0; irq < NR_IRQS; ++irq) | ||
81 | ipipe_virtualize_irq(ipipe_root_domain, | ||
82 | irq, | ||
83 | (ipipe_irq_handler_t)&asm_do_IRQ, | ||
84 | NULL, | ||
85 | &__ipipe_ack_irq, | ||
86 | IPIPE_HANDLE_MASK | IPIPE_PASS_MASK); | ||
87 | } | ||
88 | |||
89 | /* | ||
90 | * __ipipe_handle_irq() -- IPIPE's generic IRQ handler. An optimistic | ||
91 | * interrupt protection log is maintained here for each domain. Hw | ||
92 | * interrupts are masked on entry. | ||
93 | */ | ||
94 | void __ipipe_handle_irq(unsigned irq, struct pt_regs *regs) | ||
95 | { | ||
96 | struct ipipe_domain *this_domain, *next_domain; | ||
97 | struct list_head *head, *pos; | ||
98 | int m_ack, s = -1; | ||
99 | |||
100 | /* | ||
101 | * Software-triggered IRQs do not need any ack. The contents | ||
102 | * of the register frame should only be used when processing | ||
103 | * the timer interrupt, but not for handling any other | ||
104 | * interrupt. | ||
105 | */ | ||
106 | m_ack = (regs == NULL || irq == IRQ_SYSTMR || irq == IRQ_CORETMR); | ||
107 | |||
108 | this_domain = ipipe_current_domain; | ||
109 | |||
110 | if (unlikely(test_bit(IPIPE_STICKY_FLAG, &this_domain->irqs[irq].control))) | ||
111 | head = &this_domain->p_link; | ||
112 | else { | ||
113 | head = __ipipe_pipeline.next; | ||
114 | next_domain = list_entry(head, struct ipipe_domain, p_link); | ||
115 | if (likely(test_bit(IPIPE_WIRED_FLAG, &next_domain->irqs[irq].control))) { | ||
116 | if (!m_ack && next_domain->irqs[irq].acknowledge != NULL) | ||
117 | next_domain->irqs[irq].acknowledge(irq, irq_desc + irq); | ||
118 | if (test_bit(IPIPE_ROOTLOCK_FLAG, &ipipe_root_domain->flags)) | ||
119 | s = __test_and_set_bit(IPIPE_STALL_FLAG, | ||
120 | &ipipe_root_cpudom_var(status)); | ||
121 | __ipipe_dispatch_wired(next_domain, irq); | ||
122 | goto finalize; | ||
123 | return; | ||
124 | } | ||
125 | } | ||
126 | |||
127 | /* Ack the interrupt. */ | ||
128 | |||
129 | pos = head; | ||
130 | |||
131 | while (pos != &__ipipe_pipeline) { | ||
132 | next_domain = list_entry(pos, struct ipipe_domain, p_link); | ||
133 | /* | ||
134 | * For each domain handling the incoming IRQ, mark it | ||
135 | * as pending in its log. | ||
136 | */ | ||
137 | if (test_bit(IPIPE_HANDLE_FLAG, &next_domain->irqs[irq].control)) { | ||
138 | /* | ||
139 | * Domains that handle this IRQ are polled for | ||
140 | * acknowledging it by decreasing priority | ||
141 | * order. The interrupt must be made pending | ||
142 | * _first_ in the domain's status flags before | ||
143 | * the PIC is unlocked. | ||
144 | */ | ||
145 | __ipipe_set_irq_pending(next_domain, irq); | ||
146 | |||
147 | if (!m_ack && next_domain->irqs[irq].acknowledge != NULL) { | ||
148 | next_domain->irqs[irq].acknowledge(irq, irq_desc + irq); | ||
149 | m_ack = 1; | ||
150 | } | ||
151 | } | ||
152 | |||
153 | /* | ||
154 | * If the domain does not want the IRQ to be passed | ||
155 | * down the interrupt pipe, exit the loop now. | ||
156 | */ | ||
157 | if (!test_bit(IPIPE_PASS_FLAG, &next_domain->irqs[irq].control)) | ||
158 | break; | ||
159 | |||
160 | pos = next_domain->p_link.next; | ||
161 | } | ||
162 | |||
163 | /* | ||
164 | * Now walk the pipeline, yielding control to the highest | ||
165 | * priority domain that has pending interrupt(s) or | ||
166 | * immediately to the current domain if the interrupt has been | ||
167 | * marked as 'sticky'. This search does not go beyond the | ||
168 | * current domain in the pipeline. We also enforce the | ||
169 | * additional root stage lock (blackfin-specific). */ | ||
170 | |||
171 | if (test_bit(IPIPE_ROOTLOCK_FLAG, &ipipe_root_domain->flags)) | ||
172 | s = __test_and_set_bit(IPIPE_STALL_FLAG, | ||
173 | &ipipe_root_cpudom_var(status)); | ||
174 | finalize: | ||
175 | |||
176 | __ipipe_walk_pipeline(head); | ||
177 | |||
178 | if (!s) | ||
179 | __clear_bit(IPIPE_STALL_FLAG, | ||
180 | &ipipe_root_cpudom_var(status)); | ||
181 | } | ||
182 | |||
183 | int __ipipe_check_root(void) | ||
184 | { | ||
185 | return ipipe_root_domain_p; | ||
186 | } | ||
187 | |||
188 | void __ipipe_enable_irqdesc(struct ipipe_domain *ipd, unsigned irq) | ||
189 | { | ||
190 | struct irq_desc *desc = irq_desc + irq; | ||
191 | int prio = desc->ic_prio; | ||
192 | |||
193 | desc->depth = 0; | ||
194 | if (ipd != &ipipe_root && | ||
195 | atomic_inc_return(&__ipipe_irq_lvdepth[prio]) == 1) | ||
196 | __set_bit(prio, &__ipipe_irq_lvmask); | ||
197 | } | ||
198 | EXPORT_SYMBOL(__ipipe_enable_irqdesc); | ||
199 | |||
200 | void __ipipe_disable_irqdesc(struct ipipe_domain *ipd, unsigned irq) | ||
201 | { | ||
202 | struct irq_desc *desc = irq_desc + irq; | ||
203 | int prio = desc->ic_prio; | ||
204 | |||
205 | if (ipd != &ipipe_root && | ||
206 | atomic_dec_and_test(&__ipipe_irq_lvdepth[prio])) | ||
207 | __clear_bit(prio, &__ipipe_irq_lvmask); | ||
208 | } | ||
209 | EXPORT_SYMBOL(__ipipe_disable_irqdesc); | ||
210 | |||
211 | void __ipipe_stall_root_raw(void) | ||
212 | { | ||
213 | /* | ||
214 | * This code is called by the ins{bwl} routines (see | ||
215 | * arch/blackfin/lib/ins.S), which are heavily used by the | ||
216 | * network stack. It masks all interrupts but those handled by | ||
217 | * non-root domains, so that we keep decent network transfer | ||
218 | * rates for Linux without inducing pathological jitter for | ||
219 | * the real-time domain. | ||
220 | */ | ||
221 | __asm__ __volatile__ ("sti %0;" : : "d"(__ipipe_irq_lvmask)); | ||
222 | |||
223 | __set_bit(IPIPE_STALL_FLAG, | ||
224 | &ipipe_root_cpudom_var(status)); | ||
225 | } | ||
226 | |||
227 | void __ipipe_unstall_root_raw(void) | ||
228 | { | ||
229 | __clear_bit(IPIPE_STALL_FLAG, | ||
230 | &ipipe_root_cpudom_var(status)); | ||
231 | |||
232 | __asm__ __volatile__ ("sti %0;" : : "d"(bfin_irq_flags)); | ||
233 | } | ||
234 | |||
235 | int __ipipe_syscall_root(struct pt_regs *regs) | ||
236 | { | ||
237 | unsigned long flags; | ||
238 | |||
239 | /* We need to run the IRQ tail hook whenever we don't | ||
240 | * propagate a syscall to higher domains, because we know that | ||
241 | * important operations might be pending there (e.g. Xenomai | ||
242 | * deferred rescheduling). */ | ||
243 | |||
244 | if (!__ipipe_syscall_watched_p(current, regs->orig_p0)) { | ||
245 | void (*hook)(void) = (void (*)(void))__ipipe_irq_tail_hook; | ||
246 | hook(); | ||
247 | return 0; | ||
248 | } | ||
249 | |||
250 | /* | ||
251 | * This routine either returns: | ||
252 | * 0 -- if the syscall is to be passed to Linux; | ||
253 | * 1 -- if the syscall should not be passed to Linux, and no | ||
254 | * tail work should be performed; | ||
255 | * -1 -- if the syscall should not be passed to Linux but the | ||
256 | * tail work has to be performed (for handling signals etc). | ||
257 | */ | ||
258 | |||
259 | if (__ipipe_event_monitored_p(IPIPE_EVENT_SYSCALL) && | ||
260 | __ipipe_dispatch_event(IPIPE_EVENT_SYSCALL, regs) > 0) { | ||
261 | if (ipipe_root_domain_p && !in_atomic()) { | ||
262 | /* | ||
263 | * Sync pending VIRQs before _TIF_NEED_RESCHED | ||
264 | * is tested. | ||
265 | */ | ||
266 | local_irq_save_hw(flags); | ||
267 | if ((ipipe_root_cpudom_var(irqpend_himask) & IPIPE_IRQMASK_VIRT) != 0) | ||
268 | __ipipe_sync_pipeline(IPIPE_IRQMASK_VIRT); | ||
269 | local_irq_restore_hw(flags); | ||
270 | return -1; | ||
271 | } | ||
272 | return 1; | ||
273 | } | ||
274 | |||
275 | return 0; | ||
276 | } | ||
277 | |||
278 | unsigned long ipipe_critical_enter(void (*syncfn) (void)) | ||
279 | { | ||
280 | unsigned long flags; | ||
281 | |||
282 | local_irq_save_hw(flags); | ||
283 | |||
284 | return flags; | ||
285 | } | ||
286 | |||
287 | void ipipe_critical_exit(unsigned long flags) | ||
288 | { | ||
289 | local_irq_restore_hw(flags); | ||
290 | } | ||
291 | |||
292 | static void __ipipe_no_irqtail(void) | ||
293 | { | ||
294 | } | ||
295 | |||
296 | int ipipe_get_sysinfo(struct ipipe_sysinfo *info) | ||
297 | { | ||
298 | info->ncpus = num_online_cpus(); | ||
299 | info->cpufreq = ipipe_cpu_freq(); | ||
300 | info->archdep.tmirq = IPIPE_TIMER_IRQ; | ||
301 | info->archdep.tmfreq = info->cpufreq; | ||
302 | |||
303 | return 0; | ||
304 | } | ||
305 | |||
306 | /* | ||
307 | * ipipe_trigger_irq() -- Push the interrupt at front of the pipeline | ||
308 | * just like if it has been actually received from a hw source. Also | ||
309 | * works for virtual interrupts. | ||
310 | */ | ||
311 | int ipipe_trigger_irq(unsigned irq) | ||
312 | { | ||
313 | unsigned long flags; | ||
314 | |||
315 | if (irq >= IPIPE_NR_IRQS || | ||
316 | (ipipe_virtual_irq_p(irq) | ||
317 | && !test_bit(irq - IPIPE_VIRQ_BASE, &__ipipe_virtual_irq_map))) | ||
318 | return -EINVAL; | ||
319 | |||
320 | local_irq_save_hw(flags); | ||
321 | |||
322 | __ipipe_handle_irq(irq, NULL); | ||
323 | |||
324 | local_irq_restore_hw(flags); | ||
325 | |||
326 | return 1; | ||
327 | } | ||
328 | |||
329 | /* Move Linux IRQ to threads. */ | ||
330 | |||
331 | static int do_irqd(void *__desc) | ||
332 | { | ||
333 | struct irq_desc *desc = __desc; | ||
334 | unsigned irq = desc - irq_desc; | ||
335 | int thrprio = desc->thr_prio; | ||
336 | int thrmask = 1 << thrprio; | ||
337 | int cpu = smp_processor_id(); | ||
338 | cpumask_t cpumask; | ||
339 | |||
340 | sigfillset(¤t->blocked); | ||
341 | current->flags |= PF_NOFREEZE; | ||
342 | cpumask = cpumask_of_cpu(cpu); | ||
343 | set_cpus_allowed(current, cpumask); | ||
344 | ipipe_setscheduler_root(current, SCHED_FIFO, 50 + thrprio); | ||
345 | |||
346 | while (!kthread_should_stop()) { | ||
347 | local_irq_disable(); | ||
348 | if (!(desc->status & IRQ_SCHEDULED)) { | ||
349 | set_current_state(TASK_INTERRUPTIBLE); | ||
350 | resched: | ||
351 | local_irq_enable(); | ||
352 | schedule(); | ||
353 | local_irq_disable(); | ||
354 | } | ||
355 | __set_current_state(TASK_RUNNING); | ||
356 | /* | ||
357 | * If higher priority interrupt servers are ready to | ||
358 | * run, reschedule immediately. We need this for the | ||
359 | * GPIO demux IRQ handler to unmask the interrupt line | ||
360 | * _last_, after all GPIO IRQs have run. | ||
361 | */ | ||
362 | if (per_cpu(pending_irqthread_mask, cpu) & ~(thrmask|(thrmask-1))) | ||
363 | goto resched; | ||
364 | if (--per_cpu(pending_irq_count[thrprio], cpu) == 0) | ||
365 | per_cpu(pending_irqthread_mask, cpu) &= ~thrmask; | ||
366 | desc->status &= ~IRQ_SCHEDULED; | ||
367 | desc->thr_handler(irq, &__raw_get_cpu_var(__ipipe_tick_regs)); | ||
368 | local_irq_enable(); | ||
369 | } | ||
370 | __set_current_state(TASK_RUNNING); | ||
371 | return 0; | ||
372 | } | ||
373 | |||
374 | static void kick_irqd(unsigned irq, void *cookie) | ||
375 | { | ||
376 | struct irq_desc *desc = irq_desc + irq; | ||
377 | int thrprio = desc->thr_prio; | ||
378 | int thrmask = 1 << thrprio; | ||
379 | int cpu = smp_processor_id(); | ||
380 | |||
381 | if (!(desc->status & IRQ_SCHEDULED)) { | ||
382 | desc->status |= IRQ_SCHEDULED; | ||
383 | per_cpu(pending_irqthread_mask, cpu) |= thrmask; | ||
384 | ++per_cpu(pending_irq_count[thrprio], cpu); | ||
385 | wake_up_process(desc->thread); | ||
386 | } | ||
387 | } | ||
388 | |||
389 | int ipipe_start_irq_thread(unsigned irq, struct irq_desc *desc) | ||
390 | { | ||
391 | if (desc->thread || !create_irq_threads) | ||
392 | return 0; | ||
393 | |||
394 | desc->thread = kthread_create(do_irqd, desc, "IRQ %d", irq); | ||
395 | if (desc->thread == NULL) { | ||
396 | printk(KERN_ERR "irqd: could not create IRQ thread %d!\n", irq); | ||
397 | return -ENOMEM; | ||
398 | } | ||
399 | |||
400 | wake_up_process(desc->thread); | ||
401 | |||
402 | desc->thr_handler = ipipe_root_domain->irqs[irq].handler; | ||
403 | ipipe_root_domain->irqs[irq].handler = &kick_irqd; | ||
404 | |||
405 | return 0; | ||
406 | } | ||
407 | |||
408 | void __init ipipe_init_irq_threads(void) | ||
409 | { | ||
410 | unsigned irq; | ||
411 | struct irq_desc *desc; | ||
412 | |||
413 | create_irq_threads = 1; | ||
414 | |||
415 | for (irq = 0; irq < NR_IRQS; irq++) { | ||
416 | desc = irq_desc + irq; | ||
417 | if (desc->action != NULL || | ||
418 | (desc->status & IRQ_NOREQUEST) != 0) | ||
419 | ipipe_start_irq_thread(irq, desc); | ||
420 | } | ||
421 | } | ||
422 | |||
423 | EXPORT_SYMBOL(show_stack); | ||
424 | |||
425 | #ifdef CONFIG_IPIPE_TRACE_MCOUNT | ||
426 | void notrace _mcount(void); | ||
427 | EXPORT_SYMBOL(_mcount); | ||
428 | #endif /* CONFIG_IPIPE_TRACE_MCOUNT */ | ||
diff --git a/arch/blackfin/kernel/irqchip.c b/arch/blackfin/kernel/irqchip.c index 07402f57c9de..ab8209cbbad0 100644 --- a/arch/blackfin/kernel/irqchip.c +++ b/arch/blackfin/kernel/irqchip.c | |||
@@ -36,7 +36,7 @@ | |||
36 | #include <linux/irq.h> | 36 | #include <linux/irq.h> |
37 | #include <asm/trace.h> | 37 | #include <asm/trace.h> |
38 | 38 | ||
39 | static unsigned long irq_err_count; | 39 | static atomic_t irq_err_count; |
40 | static spinlock_t irq_controller_lock; | 40 | static spinlock_t irq_controller_lock; |
41 | 41 | ||
42 | /* | 42 | /* |
@@ -48,10 +48,9 @@ void dummy_mask_unmask_irq(unsigned int irq) | |||
48 | 48 | ||
49 | void ack_bad_irq(unsigned int irq) | 49 | void ack_bad_irq(unsigned int irq) |
50 | { | 50 | { |
51 | irq_err_count += 1; | 51 | atomic_inc(&irq_err_count); |
52 | printk(KERN_ERR "IRQ: spurious interrupt %d\n", irq); | 52 | printk(KERN_ERR "IRQ: spurious interrupt %d\n", irq); |
53 | } | 53 | } |
54 | EXPORT_SYMBOL(ack_bad_irq); | ||
55 | 54 | ||
56 | static struct irq_chip bad_chip = { | 55 | static struct irq_chip bad_chip = { |
57 | .ack = dummy_mask_unmask_irq, | 56 | .ack = dummy_mask_unmask_irq, |
@@ -72,7 +71,7 @@ static struct irq_desc bad_irq_desc = { | |||
72 | 71 | ||
73 | int show_interrupts(struct seq_file *p, void *v) | 72 | int show_interrupts(struct seq_file *p, void *v) |
74 | { | 73 | { |
75 | int i = *(loff_t *) v; | 74 | int i = *(loff_t *) v, j; |
76 | struct irqaction *action; | 75 | struct irqaction *action; |
77 | unsigned long flags; | 76 | unsigned long flags; |
78 | 77 | ||
@@ -80,19 +79,20 @@ int show_interrupts(struct seq_file *p, void *v) | |||
80 | spin_lock_irqsave(&irq_desc[i].lock, flags); | 79 | spin_lock_irqsave(&irq_desc[i].lock, flags); |
81 | action = irq_desc[i].action; | 80 | action = irq_desc[i].action; |
82 | if (!action) | 81 | if (!action) |
83 | goto unlock; | 82 | goto skip; |
84 | 83 | seq_printf(p, "%3d: ", i); | |
85 | seq_printf(p, "%3d: %10u ", i, kstat_irqs(i)); | 84 | for_each_online_cpu(j) |
85 | seq_printf(p, "%10u ", kstat_cpu(j).irqs[i]); | ||
86 | seq_printf(p, " %8s", irq_desc[i].chip->name); | ||
86 | seq_printf(p, " %s", action->name); | 87 | seq_printf(p, " %s", action->name); |
87 | for (action = action->next; action; action = action->next) | 88 | for (action = action->next; action; action = action->next) |
88 | seq_printf(p, ", %s", action->name); | 89 | seq_printf(p, " %s", action->name); |
89 | 90 | ||
90 | seq_putc(p, '\n'); | 91 | seq_putc(p, '\n'); |
91 | unlock: | 92 | skip: |
92 | spin_unlock_irqrestore(&irq_desc[i].lock, flags); | 93 | spin_unlock_irqrestore(&irq_desc[i].lock, flags); |
93 | } else if (i == NR_IRQS) { | 94 | } else if (i == NR_IRQS) |
94 | seq_printf(p, "Err: %10lu\n", irq_err_count); | 95 | seq_printf(p, "Err: %10u\n", atomic_read(&irq_err_count)); |
95 | } | ||
96 | return 0; | 96 | return 0; |
97 | } | 97 | } |
98 | 98 | ||
@@ -101,7 +101,6 @@ int show_interrupts(struct seq_file *p, void *v) | |||
101 | * come via this function. Instead, they should provide their | 101 | * come via this function. Instead, they should provide their |
102 | * own 'handler' | 102 | * own 'handler' |
103 | */ | 103 | */ |
104 | |||
105 | #ifdef CONFIG_DO_IRQ_L1 | 104 | #ifdef CONFIG_DO_IRQ_L1 |
106 | __attribute__((l1_text)) | 105 | __attribute__((l1_text)) |
107 | #endif | 106 | #endif |
@@ -109,8 +108,9 @@ asmlinkage void asm_do_IRQ(unsigned int irq, struct pt_regs *regs) | |||
109 | { | 108 | { |
110 | struct pt_regs *old_regs; | 109 | struct pt_regs *old_regs; |
111 | struct irq_desc *desc = irq_desc + irq; | 110 | struct irq_desc *desc = irq_desc + irq; |
111 | #ifndef CONFIG_IPIPE | ||
112 | unsigned short pending, other_ints; | 112 | unsigned short pending, other_ints; |
113 | 113 | #endif | |
114 | old_regs = set_irq_regs(regs); | 114 | old_regs = set_irq_regs(regs); |
115 | 115 | ||
116 | /* | 116 | /* |
@@ -121,9 +121,24 @@ asmlinkage void asm_do_IRQ(unsigned int irq, struct pt_regs *regs) | |||
121 | desc = &bad_irq_desc; | 121 | desc = &bad_irq_desc; |
122 | 122 | ||
123 | irq_enter(); | 123 | irq_enter(); |
124 | 124 | #ifdef CONFIG_DEBUG_STACKOVERFLOW | |
125 | /* Debugging check for stack overflow: is there less than STACK_WARN free? */ | ||
126 | { | ||
127 | long sp; | ||
128 | |||
129 | sp = __get_SP() & (THREAD_SIZE-1); | ||
130 | |||
131 | if (unlikely(sp < (sizeof(struct thread_info) + STACK_WARN))) { | ||
132 | dump_stack(); | ||
133 | printk(KERN_EMERG "%s: possible stack overflow while handling irq %i " | ||
134 | " only %ld bytes free\n", | ||
135 | __func__, irq, sp - sizeof(struct thread_info)); | ||
136 | } | ||
137 | } | ||
138 | #endif | ||
125 | generic_handle_irq(irq); | 139 | generic_handle_irq(irq); |
126 | 140 | ||
141 | #ifndef CONFIG_IPIPE /* Useless and bugous over the I-pipe: IRQs are threaded. */ | ||
127 | /* If we're the only interrupt running (ignoring IRQ15 which is for | 142 | /* If we're the only interrupt running (ignoring IRQ15 which is for |
128 | syscalls), lower our priority to IRQ14 so that softirqs run at | 143 | syscalls), lower our priority to IRQ14 so that softirqs run at |
129 | that level. If there's another, lower-level interrupt, irq_exit | 144 | that level. If there's another, lower-level interrupt, irq_exit |
@@ -133,6 +148,7 @@ asmlinkage void asm_do_IRQ(unsigned int irq, struct pt_regs *regs) | |||
133 | other_ints = pending & (pending - 1); | 148 | other_ints = pending & (pending - 1); |
134 | if (other_ints == 0) | 149 | if (other_ints == 0) |
135 | lower_to_irq14(); | 150 | lower_to_irq14(); |
151 | #endif /* !CONFIG_IPIPE */ | ||
136 | irq_exit(); | 152 | irq_exit(); |
137 | 153 | ||
138 | set_irq_regs(old_regs); | 154 | set_irq_regs(old_regs); |
diff --git a/arch/blackfin/kernel/kgdb.c b/arch/blackfin/kernel/kgdb.c index 1c5afaeb9504..b163f6d3330d 100644 --- a/arch/blackfin/kernel/kgdb.c +++ b/arch/blackfin/kernel/kgdb.c | |||
@@ -34,9 +34,14 @@ int gdb_bfin_vector = -1; | |||
34 | #error change the definition of slavecpulocks | 34 | #error change the definition of slavecpulocks |
35 | #endif | 35 | #endif |
36 | 36 | ||
37 | #ifdef CONFIG_BFIN_WDT | 37 | #define IN_MEM(addr, size, l1_addr, l1_size) \ |
38 | # error "Please unselect blackfin watchdog driver before build KGDB." | 38 | ({ \ |
39 | #endif | 39 | unsigned long __addr = (unsigned long)(addr); \ |
40 | (l1_size && __addr >= l1_addr && __addr + (size) <= l1_addr + l1_size); \ | ||
41 | }) | ||
42 | #define ASYNC_BANK_SIZE \ | ||
43 | (ASYNC_BANK0_SIZE + ASYNC_BANK1_SIZE + \ | ||
44 | ASYNC_BANK2_SIZE + ASYNC_BANK3_SIZE) | ||
40 | 45 | ||
41 | void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs) | 46 | void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs) |
42 | { | 47 | { |
@@ -219,6 +224,7 @@ int bfin_set_hw_break(unsigned long addr, int len, enum kgdb_bptype type) | |||
219 | if (bfin_type == breakinfo[breakno].type | 224 | if (bfin_type == breakinfo[breakno].type |
220 | && !breakinfo[breakno].occupied) { | 225 | && !breakinfo[breakno].occupied) { |
221 | breakinfo[breakno].occupied = 1; | 226 | breakinfo[breakno].occupied = 1; |
227 | breakinfo[breakno].skip = 0; | ||
222 | breakinfo[breakno].enabled = 1; | 228 | breakinfo[breakno].enabled = 1; |
223 | breakinfo[breakno].addr = addr; | 229 | breakinfo[breakno].addr = addr; |
224 | breakinfo[breakno].dataacc = dataacc; | 230 | breakinfo[breakno].dataacc = dataacc; |
@@ -363,12 +369,12 @@ void kgdb_passive_cpu_callback(void *info) | |||
363 | 369 | ||
364 | void kgdb_roundup_cpus(unsigned long flags) | 370 | void kgdb_roundup_cpus(unsigned long flags) |
365 | { | 371 | { |
366 | smp_call_function(kgdb_passive_cpu_callback, NULL, 0, 0); | 372 | smp_call_function(kgdb_passive_cpu_callback, NULL, 0); |
367 | } | 373 | } |
368 | 374 | ||
369 | void kgdb_roundup_cpu(int cpu, unsigned long flags) | 375 | void kgdb_roundup_cpu(int cpu, unsigned long flags) |
370 | { | 376 | { |
371 | smp_call_function_single(cpu, kgdb_passive_cpu_callback, NULL, 0, 0); | 377 | smp_call_function_single(cpu, kgdb_passive_cpu_callback, NULL, 0); |
372 | } | 378 | } |
373 | #endif | 379 | #endif |
374 | 380 | ||
@@ -385,10 +391,8 @@ int kgdb_arch_handle_exception(int vector, int signo, | |||
385 | struct pt_regs *regs) | 391 | struct pt_regs *regs) |
386 | { | 392 | { |
387 | long addr; | 393 | long addr; |
388 | long breakno; | ||
389 | char *ptr; | 394 | char *ptr; |
390 | int newPC; | 395 | int newPC; |
391 | int wp_status; | ||
392 | int i; | 396 | int i; |
393 | 397 | ||
394 | switch (remcom_in_buffer[0]) { | 398 | switch (remcom_in_buffer[0]) { |
@@ -426,17 +430,6 @@ int kgdb_arch_handle_exception(int vector, int signo, | |||
426 | kgdb_single_step = i + 1; | 430 | kgdb_single_step = i + 1; |
427 | } | 431 | } |
428 | 432 | ||
429 | if (vector == VEC_WATCH) { | ||
430 | wp_status = bfin_read_WPSTAT(); | ||
431 | for (breakno = 0; breakno < HW_WATCHPOINT_NUM; breakno++) { | ||
432 | if (wp_status & (1 << breakno)) { | ||
433 | breakinfo->skip = 1; | ||
434 | break; | ||
435 | } | ||
436 | } | ||
437 | bfin_write_WPSTAT(0); | ||
438 | } | ||
439 | |||
440 | bfin_correct_hw_break(); | 433 | bfin_correct_hw_break(); |
441 | 434 | ||
442 | return 0; | 435 | return 0; |
@@ -478,57 +471,32 @@ static int validate_memory_access_address(unsigned long addr, int size) | |||
478 | return 0; | 471 | return 0; |
479 | if (addr >= SYSMMR_BASE) | 472 | if (addr >= SYSMMR_BASE) |
480 | return 0; | 473 | return 0; |
481 | if (addr >= ASYNC_BANK0_BASE | 474 | if (IN_MEM(addr, size, ASYNC_BANK0_BASE, ASYNC_BANK_SIZE)) |
482 | && addr + size <= ASYNC_BANK3_BASE + ASYNC_BANK3_SIZE) | ||
483 | return 0; | 475 | return 0; |
484 | if (cpu == 0) { | 476 | if (cpu == 0) { |
485 | if (addr >= L1_SCRATCH_START | 477 | if (IN_MEM(addr, size, L1_SCRATCH_START, L1_SCRATCH_LENGTH)) |
486 | && (addr + size <= L1_SCRATCH_START + L1_SCRATCH_LENGTH)) | ||
487 | return 0; | 478 | return 0; |
488 | #if L1_CODE_LENGTH != 0 | 479 | if (IN_MEM(addr, size, L1_CODE_START, L1_CODE_LENGTH)) |
489 | if (addr >= L1_CODE_START | ||
490 | && (addr + size <= L1_CODE_START + L1_CODE_LENGTH)) | ||
491 | return 0; | 480 | return 0; |
492 | #endif | 481 | if (IN_MEM(addr, size, L1_DATA_A_START, L1_DATA_A_LENGTH)) |
493 | #if L1_DATA_A_LENGTH != 0 | ||
494 | if (addr >= L1_DATA_A_START | ||
495 | && (addr + size <= L1_DATA_A_START + L1_DATA_A_LENGTH)) | ||
496 | return 0; | 482 | return 0; |
497 | #endif | 483 | if (IN_MEM(addr, size, L1_DATA_B_START, L1_DATA_B_LENGTH)) |
498 | #if L1_DATA_B_LENGTH != 0 | ||
499 | if (addr >= L1_DATA_B_START | ||
500 | && (addr + size <= L1_DATA_B_START + L1_DATA_B_LENGTH)) | ||
501 | return 0; | 484 | return 0; |
502 | #endif | ||
503 | #ifdef CONFIG_SMP | 485 | #ifdef CONFIG_SMP |
504 | } else if (cpu == 1) { | 486 | } else if (cpu == 1) { |
505 | if (addr >= COREB_L1_SCRATCH_START | 487 | if (IN_MEM(addr, size, COREB_L1_SCRATCH_START, L1_SCRATCH_LENGTH)) |
506 | && (addr + size <= COREB_L1_SCRATCH_START | ||
507 | + L1_SCRATCH_LENGTH)) | ||
508 | return 0; | 488 | return 0; |
509 | # if L1_CODE_LENGTH != 0 | 489 | if (IN_MEM(addr, size, COREB_L1_CODE_START, L1_CODE_LENGTH)) |
510 | if (addr >= COREB_L1_CODE_START | ||
511 | && (addr + size <= COREB_L1_CODE_START + L1_CODE_LENGTH)) | ||
512 | return 0; | 490 | return 0; |
513 | # endif | 491 | if (IN_MEM(addr, size, COREB_L1_DATA_A_START, L1_DATA_A_LENGTH)) |
514 | # if L1_DATA_A_LENGTH != 0 | ||
515 | if (addr >= COREB_L1_DATA_A_START | ||
516 | && (addr + size <= COREB_L1_DATA_A_START + L1_DATA_A_LENGTH)) | ||
517 | return 0; | 492 | return 0; |
518 | # endif | 493 | if (IN_MEM(addr, size, COREB_L1_DATA_B_START, L1_DATA_B_LENGTH)) |
519 | # if L1_DATA_B_LENGTH != 0 | ||
520 | if (addr >= COREB_L1_DATA_B_START | ||
521 | && (addr + size <= COREB_L1_DATA_B_START + L1_DATA_B_LENGTH)) | ||
522 | return 0; | 494 | return 0; |
523 | # endif | ||
524 | #endif | 495 | #endif |
525 | } | 496 | } |
526 | 497 | ||
527 | #if L2_LENGTH != 0 | 498 | if (IN_MEM(addr, size, L2_START, L2_LENGTH)) |
528 | if (addr >= L2_START | ||
529 | && addr + size <= L2_START + L2_LENGTH) | ||
530 | return 0; | 499 | return 0; |
531 | #endif | ||
532 | 500 | ||
533 | return EFAULT; | 501 | return EFAULT; |
534 | } | 502 | } |
@@ -582,12 +550,9 @@ int kgdb_mem2hex(char *mem, char *buf, int count) | |||
582 | default: | 550 | default: |
583 | err = EFAULT; | 551 | err = EFAULT; |
584 | } | 552 | } |
585 | } else if (cpu == 0 && (unsigned int)mem >= L1_CODE_START && | 553 | } else if ((cpu == 0 && IN_MEM(mem, count, L1_CODE_START, L1_CODE_LENGTH)) |
586 | (unsigned int)(mem + count) <= L1_CODE_START + L1_CODE_LENGTH | ||
587 | #ifdef CONFIG_SMP | 554 | #ifdef CONFIG_SMP |
588 | || cpu == 1 && (unsigned int)mem >= COREB_L1_CODE_START && | 555 | || (cpu == 1 && IN_MEM(mem, count, COREB_L1_CODE_START, L1_CODE_LENGTH)) |
589 | (unsigned int)(mem + count) <= | ||
590 | COREB_L1_CODE_START + L1_CODE_LENGTH | ||
591 | #endif | 556 | #endif |
592 | ) { | 557 | ) { |
593 | /* access L1 instruction SRAM*/ | 558 | /* access L1 instruction SRAM*/ |
@@ -658,12 +623,9 @@ int kgdb_ebin2mem(char *buf, char *mem, int count) | |||
658 | default: | 623 | default: |
659 | return EFAULT; | 624 | return EFAULT; |
660 | } | 625 | } |
661 | } else if (cpu == 0 && (unsigned int)mem >= L1_CODE_START && | 626 | } else if ((cpu == 0 && IN_MEM(mem, count, L1_CODE_START, L1_CODE_LENGTH)) |
662 | (unsigned int)(mem + count) < L1_CODE_START + L1_CODE_LENGTH | ||
663 | #ifdef CONFIG_SMP | 627 | #ifdef CONFIG_SMP |
664 | || cpu == 1 && (unsigned int)mem >= COREB_L1_CODE_START && | 628 | || (cpu == 1 && IN_MEM(mem, count, COREB_L1_CODE_START, L1_CODE_LENGTH)) |
665 | (unsigned int)(mem + count) <= | ||
666 | COREB_L1_CODE_START + L1_CODE_LENGTH | ||
667 | #endif | 629 | #endif |
668 | ) { | 630 | ) { |
669 | /* access L1 instruction SRAM */ | 631 | /* access L1 instruction SRAM */ |
@@ -723,12 +685,9 @@ int kgdb_hex2mem(char *buf, char *mem, int count) | |||
723 | default: | 685 | default: |
724 | return EFAULT; | 686 | return EFAULT; |
725 | } | 687 | } |
726 | } else if (cpu == 0 && (unsigned int)mem >= L1_CODE_START && | 688 | } else if ((cpu == 0 && IN_MEM(mem, count, L1_CODE_START, L1_CODE_LENGTH)) |
727 | (unsigned int)(mem + count) <= L1_CODE_START + L1_CODE_LENGTH | ||
728 | #ifdef CONFIG_SMP | 689 | #ifdef CONFIG_SMP |
729 | || cpu == 1 && (unsigned int)mem >= COREB_L1_CODE_START && | 690 | || (cpu == 1 && IN_MEM(mem, count, COREB_L1_CODE_START, L1_CODE_LENGTH)) |
730 | (unsigned int)(mem + count) <= | ||
731 | COREB_L1_CODE_START + L1_CODE_LENGTH | ||
732 | #endif | 691 | #endif |
733 | ) { | 692 | ) { |
734 | /* access L1 instruction SRAM */ | 693 | /* access L1 instruction SRAM */ |
@@ -745,24 +704,16 @@ int kgdb_validate_break_address(unsigned long addr) | |||
745 | 704 | ||
746 | if (addr >= 0x1000 && (addr + BREAK_INSTR_SIZE) <= physical_mem_end) | 705 | if (addr >= 0x1000 && (addr + BREAK_INSTR_SIZE) <= physical_mem_end) |
747 | return 0; | 706 | return 0; |
748 | if (addr >= ASYNC_BANK0_BASE | 707 | if (IN_MEM(addr, BREAK_INSTR_SIZE, ASYNC_BANK0_BASE, ASYNC_BANK_SIZE)) |
749 | && addr + BREAK_INSTR_SIZE <= ASYNC_BANK3_BASE + ASYNC_BANK3_BASE) | ||
750 | return 0; | 708 | return 0; |
751 | #if L1_CODE_LENGTH != 0 | 709 | if (cpu == 0 && IN_MEM(addr, BREAK_INSTR_SIZE, L1_CODE_START, L1_CODE_LENGTH)) |
752 | if (cpu == 0 && addr >= L1_CODE_START | ||
753 | && addr + BREAK_INSTR_SIZE <= L1_CODE_START + L1_CODE_LENGTH) | ||
754 | return 0; | 710 | return 0; |
755 | # ifdef CONFIG_SMP | 711 | #ifdef CONFIG_SMP |
756 | else if (cpu == 1 && addr >= COREB_L1_CODE_START | 712 | else if (cpu == 1 && IN_MEM(addr, BREAK_INSTR_SIZE, COREB_L1_CODE_START, L1_CODE_LENGTH)) |
757 | && addr + BREAK_INSTR_SIZE <= COREB_L1_CODE_START + L1_CODE_LENGTH) | ||
758 | return 0; | 713 | return 0; |
759 | # endif | ||
760 | #endif | 714 | #endif |
761 | #if L2_LENGTH != 0 | 715 | if (IN_MEM(addr, BREAK_INSTR_SIZE, L2_START, L2_LENGTH)) |
762 | if (addr >= L2_START | ||
763 | && addr + BREAK_INSTR_SIZE <= L2_START + L2_LENGTH) | ||
764 | return 0; | 716 | return 0; |
765 | #endif | ||
766 | 717 | ||
767 | return EFAULT; | 718 | return EFAULT; |
768 | } | 719 | } |
@@ -772,13 +723,9 @@ int kgdb_arch_set_breakpoint(unsigned long addr, char *saved_instr) | |||
772 | int err; | 723 | int err; |
773 | int cpu = raw_smp_processor_id(); | 724 | int cpu = raw_smp_processor_id(); |
774 | 725 | ||
775 | if ((cpu == 0 && (unsigned int)addr >= L1_CODE_START | 726 | if ((cpu == 0 && IN_MEM(addr, BREAK_INSTR_SIZE, L1_CODE_START, L1_CODE_LENGTH)) |
776 | && (unsigned int)(addr + BREAK_INSTR_SIZE) | ||
777 | < L1_CODE_START + L1_CODE_LENGTH) | ||
778 | #ifdef CONFIG_SMP | 727 | #ifdef CONFIG_SMP |
779 | || (cpu == 1 && (unsigned int)addr >= COREB_L1_CODE_START | 728 | || (cpu == 1 && IN_MEM(addr, BREAK_INSTR_SIZE, COREB_L1_CODE_START, L1_CODE_LENGTH)) |
780 | && (unsigned int)(addr + BREAK_INSTR_SIZE) | ||
781 | < COREB_L1_CODE_START + L1_CODE_LENGTH) | ||
782 | #endif | 729 | #endif |
783 | ) { | 730 | ) { |
784 | /* access L1 instruction SRAM */ | 731 | /* access L1 instruction SRAM */ |
@@ -804,9 +751,7 @@ int kgdb_arch_set_breakpoint(unsigned long addr, char *saved_instr) | |||
804 | 751 | ||
805 | int kgdb_arch_remove_breakpoint(unsigned long addr, char *bundle) | 752 | int kgdb_arch_remove_breakpoint(unsigned long addr, char *bundle) |
806 | { | 753 | { |
807 | if ((unsigned int)addr >= L1_CODE_START && | 754 | if (IN_MEM(addr, BREAK_INSTR_SIZE, L1_CODE_START, L1_CODE_LENGTH)) { |
808 | (unsigned int)(addr + BREAK_INSTR_SIZE) < | ||
809 | L1_CODE_START + L1_CODE_LENGTH) { | ||
810 | /* access L1 instruction SRAM */ | 755 | /* access L1 instruction SRAM */ |
811 | if (dma_memcpy((void *)addr, bundle, BREAK_INSTR_SIZE) == NULL) | 756 | if (dma_memcpy((void *)addr, bundle, BREAK_INSTR_SIZE) == NULL) |
812 | return -EFAULT; | 757 | return -EFAULT; |
diff --git a/arch/blackfin/kernel/kgdb_test.c b/arch/blackfin/kernel/kgdb_test.c new file mode 100644 index 000000000000..3dba9c17304a --- /dev/null +++ b/arch/blackfin/kernel/kgdb_test.c | |||
@@ -0,0 +1,123 @@ | |||
1 | /* | ||
2 | * arch/blackfin/kernel/kgdb_test.c - Blackfin kgdb tests | ||
3 | * | ||
4 | * Copyright 2005-2008 Analog Devices Inc. | ||
5 | * | ||
6 | * Licensed under the GPL-2 or later. | ||
7 | */ | ||
8 | |||
9 | #include <linux/module.h> | ||
10 | #include <linux/kernel.h> | ||
11 | #include <linux/init.h> | ||
12 | #include <linux/proc_fs.h> | ||
13 | |||
14 | #include <asm/current.h> | ||
15 | #include <asm/uaccess.h> | ||
16 | #include <asm/system.h> | ||
17 | |||
18 | #include <asm/blackfin.h> | ||
19 | |||
20 | static char cmdline[256]; | ||
21 | static unsigned long len; | ||
22 | |||
23 | static int num1 __attribute__((l1_data)); | ||
24 | |||
25 | void kgdb_l1_test(void) __attribute__((l1_text)); | ||
26 | |||
27 | void kgdb_l1_test(void) | ||
28 | { | ||
29 | printk(KERN_ALERT "L1(before change) : data variable addr = 0x%p, data value is %d\n", &num1, num1); | ||
30 | printk(KERN_ALERT "L1 : code function addr = 0x%p\n", kgdb_l1_test); | ||
31 | num1 = num1 + 10 ; | ||
32 | printk(KERN_ALERT "L1(after change) : data variable addr = 0x%p, data value is %d\n", &num1, num1); | ||
33 | return ; | ||
34 | } | ||
35 | #if L2_LENGTH | ||
36 | |||
37 | static int num2 __attribute__((l2)); | ||
38 | void kgdb_l2_test(void) __attribute__((l2)); | ||
39 | |||
40 | void kgdb_l2_test(void) | ||
41 | { | ||
42 | printk(KERN_ALERT "L2(before change) : data variable addr = 0x%p, data value is %d\n", &num2, num2); | ||
43 | printk(KERN_ALERT "L2 : code function addr = 0x%p\n", kgdb_l2_test); | ||
44 | num2 = num2 + 20 ; | ||
45 | printk(KERN_ALERT "L2(after change) : data variable addr = 0x%p, data value is %d\n", &num2, num2); | ||
46 | return ; | ||
47 | } | ||
48 | |||
49 | #endif | ||
50 | |||
51 | |||
52 | int kgdb_test(char *name, int len, int count, int z) | ||
53 | { | ||
54 | printk(KERN_DEBUG "kgdb name(%d): %s, %d, %d\n", len, name, count, z); | ||
55 | count = z; | ||
56 | return count; | ||
57 | } | ||
58 | |||
59 | static int test_proc_output(char *buf) | ||
60 | { | ||
61 | kgdb_test("hello world!", 12, 0x55, 0x10); | ||
62 | kgdb_l1_test(); | ||
63 | #if L2_LENGTH | ||
64 | kgdb_l2_test(); | ||
65 | #endif | ||
66 | |||
67 | return 0; | ||
68 | } | ||
69 | |||
70 | static int test_read_proc(char *page, char **start, off_t off, | ||
71 | int count, int *eof, void *data) | ||
72 | { | ||
73 | int len; | ||
74 | |||
75 | len = test_proc_output(page); | ||
76 | if (len <= off+count) | ||
77 | *eof = 1; | ||
78 | *start = page + off; | ||
79 | len -= off; | ||
80 | if (len > count) | ||
81 | len = count; | ||
82 | if (len < 0) | ||
83 | len = 0; | ||
84 | return len; | ||
85 | } | ||
86 | |||
87 | static int test_write_proc(struct file *file, const char *buffer, | ||
88 | unsigned long count, void *data) | ||
89 | { | ||
90 | if (count >= 256) | ||
91 | len = 255; | ||
92 | else | ||
93 | len = count; | ||
94 | |||
95 | memcpy(cmdline, buffer, count); | ||
96 | cmdline[len] = 0; | ||
97 | |||
98 | return len; | ||
99 | } | ||
100 | |||
101 | static int __init kgdbtest_init(void) | ||
102 | { | ||
103 | struct proc_dir_entry *entry; | ||
104 | |||
105 | entry = create_proc_entry("kgdbtest", 0, NULL); | ||
106 | if (entry == NULL) | ||
107 | return -ENOMEM; | ||
108 | |||
109 | entry->read_proc = test_read_proc; | ||
110 | entry->write_proc = test_write_proc; | ||
111 | entry->data = NULL; | ||
112 | |||
113 | return 0; | ||
114 | } | ||
115 | |||
116 | static void __exit kgdbtest_exit(void) | ||
117 | { | ||
118 | remove_proc_entry("kgdbtest", NULL); | ||
119 | } | ||
120 | |||
121 | module_init(kgdbtest_init); | ||
122 | module_exit(kgdbtest_exit); | ||
123 | MODULE_LICENSE("GPL"); | ||
diff --git a/arch/blackfin/kernel/mcount.S b/arch/blackfin/kernel/mcount.S new file mode 100644 index 000000000000..edcfb3865f46 --- /dev/null +++ b/arch/blackfin/kernel/mcount.S | |||
@@ -0,0 +1,70 @@ | |||
1 | /* | ||
2 | * linux/arch/blackfin/mcount.S | ||
3 | * | ||
4 | * Copyright (C) 2006 Analog Devices Inc. | ||
5 | * | ||
6 | * 2007/04/12 Save index, length, modify and base registers. --rpm | ||
7 | */ | ||
8 | |||
9 | #include <linux/linkage.h> | ||
10 | #include <asm/blackfin.h> | ||
11 | |||
12 | .text | ||
13 | |||
14 | .align 4 /* just in case */ | ||
15 | |||
16 | ENTRY(__mcount) | ||
17 | [--sp] = i0; | ||
18 | [--sp] = i1; | ||
19 | [--sp] = i2; | ||
20 | [--sp] = i3; | ||
21 | [--sp] = l0; | ||
22 | [--sp] = l1; | ||
23 | [--sp] = l2; | ||
24 | [--sp] = l3; | ||
25 | [--sp] = m0; | ||
26 | [--sp] = m1; | ||
27 | [--sp] = m2; | ||
28 | [--sp] = m3; | ||
29 | [--sp] = b0; | ||
30 | [--sp] = b1; | ||
31 | [--sp] = b2; | ||
32 | [--sp] = b3; | ||
33 | [--sp] = ( r7:0, p5:0 ); | ||
34 | [--sp] = ASTAT; | ||
35 | |||
36 | p1.L = _ipipe_trace_enable; | ||
37 | p1.H = _ipipe_trace_enable; | ||
38 | r7 = [p1]; | ||
39 | CC = r7 == 0; | ||
40 | if CC jump out; | ||
41 | link 0x10; | ||
42 | r0 = 0x0; | ||
43 | [sp + 0xc] = r0; /* v */ | ||
44 | r0 = 0x0; /* type: IPIPE_TRACE_FN */ | ||
45 | r1 = rets; | ||
46 | p0 = [fp]; /* p0: Prior FP */ | ||
47 | r2 = [p0 + 4]; /* r2: Prior RETS */ | ||
48 | call ___ipipe_trace; | ||
49 | unlink; | ||
50 | out: | ||
51 | ASTAT = [sp++]; | ||
52 | ( r7:0, p5:0 ) = [sp++]; | ||
53 | b3 = [sp++]; | ||
54 | b2 = [sp++]; | ||
55 | b1 = [sp++]; | ||
56 | b0 = [sp++]; | ||
57 | m3 = [sp++]; | ||
58 | m2 = [sp++]; | ||
59 | m1 = [sp++]; | ||
60 | m0 = [sp++]; | ||
61 | l3 = [sp++]; | ||
62 | l2 = [sp++]; | ||
63 | l1 = [sp++]; | ||
64 | l0 = [sp++]; | ||
65 | i3 = [sp++]; | ||
66 | i2 = [sp++]; | ||
67 | i1 = [sp++]; | ||
68 | i0 = [sp++]; | ||
69 | rts; | ||
70 | ENDPROC(__mcount) | ||
diff --git a/arch/blackfin/kernel/module.c b/arch/blackfin/kernel/module.c index e1bebc80a5bf..1bd7f2d018a8 100644 --- a/arch/blackfin/kernel/module.c +++ b/arch/blackfin/kernel/module.c | |||
@@ -37,111 +37,6 @@ | |||
37 | #include <asm/dma.h> | 37 | #include <asm/dma.h> |
38 | #include <asm/cacheflush.h> | 38 | #include <asm/cacheflush.h> |
39 | 39 | ||
40 | /* | ||
41 | * handle arithmetic relocations. | ||
42 | * See binutils/bfd/elf32-bfin.c for more details | ||
43 | */ | ||
44 | #define RELOC_STACK_SIZE 100 | ||
45 | static uint32_t reloc_stack[RELOC_STACK_SIZE]; | ||
46 | static unsigned int reloc_stack_tos; | ||
47 | |||
48 | #define is_reloc_stack_empty() ((reloc_stack_tos > 0)?0:1) | ||
49 | |||
50 | static void reloc_stack_push(uint32_t value) | ||
51 | { | ||
52 | reloc_stack[reloc_stack_tos++] = value; | ||
53 | } | ||
54 | |||
55 | static uint32_t reloc_stack_pop(void) | ||
56 | { | ||
57 | return reloc_stack[--reloc_stack_tos]; | ||
58 | } | ||
59 | |||
60 | static uint32_t reloc_stack_operate(unsigned int oper, struct module *mod) | ||
61 | { | ||
62 | uint32_t value; | ||
63 | |||
64 | switch (oper) { | ||
65 | case R_add: | ||
66 | value = reloc_stack[reloc_stack_tos - 2] + | ||
67 | reloc_stack[reloc_stack_tos - 1]; | ||
68 | reloc_stack_tos -= 2; | ||
69 | break; | ||
70 | case R_sub: | ||
71 | value = reloc_stack[reloc_stack_tos - 2] - | ||
72 | reloc_stack[reloc_stack_tos - 1]; | ||
73 | reloc_stack_tos -= 2; | ||
74 | break; | ||
75 | case R_mult: | ||
76 | value = reloc_stack[reloc_stack_tos - 2] * | ||
77 | reloc_stack[reloc_stack_tos - 1]; | ||
78 | reloc_stack_tos -= 2; | ||
79 | break; | ||
80 | case R_div: | ||
81 | value = reloc_stack[reloc_stack_tos - 2] / | ||
82 | reloc_stack[reloc_stack_tos - 1]; | ||
83 | reloc_stack_tos -= 2; | ||
84 | break; | ||
85 | case R_mod: | ||
86 | value = reloc_stack[reloc_stack_tos - 2] % | ||
87 | reloc_stack[reloc_stack_tos - 1]; | ||
88 | reloc_stack_tos -= 2; | ||
89 | break; | ||
90 | case R_lshift: | ||
91 | value = reloc_stack[reloc_stack_tos - 2] << | ||
92 | reloc_stack[reloc_stack_tos - 1]; | ||
93 | reloc_stack_tos -= 2; | ||
94 | break; | ||
95 | case R_rshift: | ||
96 | value = reloc_stack[reloc_stack_tos - 2] >> | ||
97 | reloc_stack[reloc_stack_tos - 1]; | ||
98 | reloc_stack_tos -= 2; | ||
99 | break; | ||
100 | case R_and: | ||
101 | value = reloc_stack[reloc_stack_tos - 2] & | ||
102 | reloc_stack[reloc_stack_tos - 1]; | ||
103 | reloc_stack_tos -= 2; | ||
104 | break; | ||
105 | case R_or: | ||
106 | value = reloc_stack[reloc_stack_tos - 2] | | ||
107 | reloc_stack[reloc_stack_tos - 1]; | ||
108 | reloc_stack_tos -= 2; | ||
109 | break; | ||
110 | case R_xor: | ||
111 | value = reloc_stack[reloc_stack_tos - 2] ^ | ||
112 | reloc_stack[reloc_stack_tos - 1]; | ||
113 | reloc_stack_tos -= 2; | ||
114 | break; | ||
115 | case R_land: | ||
116 | value = reloc_stack[reloc_stack_tos - 2] && | ||
117 | reloc_stack[reloc_stack_tos - 1]; | ||
118 | reloc_stack_tos -= 2; | ||
119 | break; | ||
120 | case R_lor: | ||
121 | value = reloc_stack[reloc_stack_tos - 2] || | ||
122 | reloc_stack[reloc_stack_tos - 1]; | ||
123 | reloc_stack_tos -= 2; | ||
124 | break; | ||
125 | case R_neg: | ||
126 | value = -reloc_stack[reloc_stack_tos - 1]; | ||
127 | reloc_stack_tos--; | ||
128 | break; | ||
129 | case R_comp: | ||
130 | value = ~reloc_stack[reloc_stack_tos - 1]; | ||
131 | reloc_stack_tos -= 1; | ||
132 | break; | ||
133 | default: | ||
134 | printk(KERN_WARNING "module %s: unhandled reloction\n", | ||
135 | mod->name); | ||
136 | return 0; | ||
137 | } | ||
138 | |||
139 | /* now push the new value back on stack */ | ||
140 | reloc_stack_push(value); | ||
141 | |||
142 | return value; | ||
143 | } | ||
144 | |||
145 | void *module_alloc(unsigned long size) | 40 | void *module_alloc(unsigned long size) |
146 | { | 41 | { |
147 | if (size == 0) | 42 | if (size == 0) |
@@ -334,16 +229,18 @@ apply_relocate_add(Elf_Shdr * sechdrs, const char *strtab, | |||
334 | undefined symbols have been resolved. */ | 229 | undefined symbols have been resolved. */ |
335 | sym = (Elf32_Sym *) sechdrs[symindex].sh_addr | 230 | sym = (Elf32_Sym *) sechdrs[symindex].sh_addr |
336 | + ELF32_R_SYM(rel[i].r_info); | 231 | + ELF32_R_SYM(rel[i].r_info); |
337 | if (is_reloc_stack_empty()) { | 232 | value = sym->st_value; |
338 | value = sym->st_value; | ||
339 | } else { | ||
340 | value = reloc_stack_pop(); | ||
341 | } | ||
342 | value += rel[i].r_addend; | 233 | value += rel[i].r_addend; |
343 | pr_debug("location is %x, value is %x type is %d \n", | 234 | pr_debug("location is %x, value is %x type is %d \n", |
344 | (unsigned int) location32, value, | 235 | (unsigned int) location32, value, |
345 | ELF32_R_TYPE(rel[i].r_info)); | 236 | ELF32_R_TYPE(rel[i].r_info)); |
346 | 237 | #ifdef CONFIG_SMP | |
238 | if ((unsigned long)location16 >= COREB_L1_DATA_A_START) { | ||
239 | printk(KERN_ERR "module %s: cannot relocate in L1: %u (SMP kernel)", | ||
240 | mod->name, ELF32_R_TYPE(rel[i].r_info)); | ||
241 | return -ENOEXEC; | ||
242 | } | ||
243 | #endif | ||
347 | switch (ELF32_R_TYPE(rel[i].r_info)) { | 244 | switch (ELF32_R_TYPE(rel[i].r_info)) { |
348 | 245 | ||
349 | case R_pcrel24: | 246 | case R_pcrel24: |
@@ -355,6 +252,12 @@ apply_relocate_add(Elf_Shdr * sechdrs, const char *strtab, | |||
355 | location32 = (uint32_t *) location16; | 252 | location32 = (uint32_t *) location16; |
356 | value -= (uint32_t) location32; | 253 | value -= (uint32_t) location32; |
357 | value >>= 1; | 254 | value >>= 1; |
255 | if ((value & 0xFF000000) != 0 && | ||
256 | (value & 0xFF000000) != 0xFF000000) { | ||
257 | printk(KERN_ERR "module %s: relocation overflow\n", | ||
258 | mod->name); | ||
259 | return -ENOEXEC; | ||
260 | } | ||
358 | pr_debug("value is %x, before %x-%x after %x-%x\n", value, | 261 | pr_debug("value is %x, before %x-%x after %x-%x\n", value, |
359 | *location16, *(location16 + 1), | 262 | *location16, *(location16 + 1), |
360 | (*location16 & 0xff00) | (value >> 16 & 0x00ff), | 263 | (*location16 & 0xff00) | (value >> 16 & 0x00ff), |
@@ -399,28 +302,6 @@ apply_relocate_add(Elf_Shdr * sechdrs, const char *strtab, | |||
399 | pr_debug("before %x after %x\n", *location32, value); | 302 | pr_debug("before %x after %x\n", *location32, value); |
400 | *location32 = value; | 303 | *location32 = value; |
401 | break; | 304 | break; |
402 | case R_push: | ||
403 | reloc_stack_push(value); | ||
404 | break; | ||
405 | case R_const: | ||
406 | reloc_stack_push(rel[i].r_addend); | ||
407 | break; | ||
408 | case R_add: | ||
409 | case R_sub: | ||
410 | case R_mult: | ||
411 | case R_div: | ||
412 | case R_mod: | ||
413 | case R_lshift: | ||
414 | case R_rshift: | ||
415 | case R_and: | ||
416 | case R_or: | ||
417 | case R_xor: | ||
418 | case R_land: | ||
419 | case R_lor: | ||
420 | case R_neg: | ||
421 | case R_comp: | ||
422 | reloc_stack_operate(ELF32_R_TYPE(rel[i].r_info), mod); | ||
423 | break; | ||
424 | default: | 305 | default: |
425 | printk(KERN_ERR "module %s: Unknown relocation: %u\n", | 306 | printk(KERN_ERR "module %s: Unknown relocation: %u\n", |
426 | mod->name, ELF32_R_TYPE(rel[i].r_info)); | 307 | mod->name, ELF32_R_TYPE(rel[i].r_info)); |
@@ -436,6 +317,7 @@ module_finalize(const Elf_Ehdr * hdr, | |||
436 | { | 317 | { |
437 | unsigned int i, strindex = 0, symindex = 0; | 318 | unsigned int i, strindex = 0, symindex = 0; |
438 | char *secstrings; | 319 | char *secstrings; |
320 | long err = 0; | ||
439 | 321 | ||
440 | secstrings = (void *)hdr + sechdrs[hdr->e_shstrndx].sh_offset; | 322 | secstrings = (void *)hdr + sechdrs[hdr->e_shstrndx].sh_offset; |
441 | 323 | ||
@@ -460,8 +342,10 @@ module_finalize(const Elf_Ehdr * hdr, | |||
460 | (strcmp(".rela.l1.text", secstrings + sechdrs[i].sh_name) == 0) || | 342 | (strcmp(".rela.l1.text", secstrings + sechdrs[i].sh_name) == 0) || |
461 | ((strcmp(".rela.text", secstrings + sechdrs[i].sh_name) == 0) && | 343 | ((strcmp(".rela.text", secstrings + sechdrs[i].sh_name) == 0) && |
462 | (hdr->e_flags & (EF_BFIN_CODE_IN_L1|EF_BFIN_CODE_IN_L2))))) { | 344 | (hdr->e_flags & (EF_BFIN_CODE_IN_L1|EF_BFIN_CODE_IN_L2))))) { |
463 | apply_relocate_add((Elf_Shdr *) sechdrs, strtab, | 345 | err = apply_relocate_add((Elf_Shdr *) sechdrs, strtab, |
464 | symindex, i, mod); | 346 | symindex, i, mod); |
347 | if (err < 0) | ||
348 | return -ENOEXEC; | ||
465 | } | 349 | } |
466 | } | 350 | } |
467 | return 0; | 351 | return 0; |
diff --git a/arch/blackfin/kernel/process.c b/arch/blackfin/kernel/process.c index 0c3ea118b657..33e2e8993f7f 100644 --- a/arch/blackfin/kernel/process.c +++ b/arch/blackfin/kernel/process.c | |||
@@ -39,6 +39,7 @@ | |||
39 | 39 | ||
40 | #include <asm/blackfin.h> | 40 | #include <asm/blackfin.h> |
41 | #include <asm/fixed_code.h> | 41 | #include <asm/fixed_code.h> |
42 | #include <asm/mem_map.h> | ||
42 | 43 | ||
43 | asmlinkage void ret_from_fork(void); | 44 | asmlinkage void ret_from_fork(void); |
44 | 45 | ||
@@ -81,11 +82,14 @@ void cpu_idle(void)__attribute__((l1_text)); | |||
81 | */ | 82 | */ |
82 | static void default_idle(void) | 83 | static void default_idle(void) |
83 | { | 84 | { |
84 | local_irq_disable(); | 85 | #ifdef CONFIG_IPIPE |
86 | ipipe_suspend_domain(); | ||
87 | #endif | ||
88 | local_irq_disable_hw(); | ||
85 | if (!need_resched()) | 89 | if (!need_resched()) |
86 | idle_with_irq_disabled(); | 90 | idle_with_irq_disabled(); |
87 | 91 | ||
88 | local_irq_enable(); | 92 | local_irq_enable_hw(); |
89 | } | 93 | } |
90 | 94 | ||
91 | /* | 95 | /* |
@@ -154,6 +158,7 @@ pid_t kernel_thread(int (*fn) (void *), void *arg, unsigned long flags) | |||
154 | return do_fork(flags | CLONE_VM | CLONE_UNTRACED, 0, ®s, 0, NULL, | 158 | return do_fork(flags | CLONE_VM | CLONE_UNTRACED, 0, ®s, 0, NULL, |
155 | NULL); | 159 | NULL); |
156 | } | 160 | } |
161 | EXPORT_SYMBOL(kernel_thread); | ||
157 | 162 | ||
158 | void flush_thread(void) | 163 | void flush_thread(void) |
159 | { | 164 | { |
@@ -170,6 +175,13 @@ asmlinkage int bfin_clone(struct pt_regs *regs) | |||
170 | unsigned long clone_flags; | 175 | unsigned long clone_flags; |
171 | unsigned long newsp; | 176 | unsigned long newsp; |
172 | 177 | ||
178 | #ifdef __ARCH_SYNC_CORE_DCACHE | ||
179 | if (current->rt.nr_cpus_allowed == num_possible_cpus()) { | ||
180 | current->cpus_allowed = cpumask_of_cpu(smp_processor_id()); | ||
181 | current->rt.nr_cpus_allowed = 1; | ||
182 | } | ||
183 | #endif | ||
184 | |||
173 | /* syscall2 puts clone_flags in r0 and usp in r1 */ | 185 | /* syscall2 puts clone_flags in r0 and usp in r1 */ |
174 | clone_flags = regs->r0; | 186 | clone_flags = regs->r0; |
175 | newsp = regs->r1; | 187 | newsp = regs->r1; |
@@ -337,22 +349,22 @@ int _access_ok(unsigned long addr, unsigned long size) | |||
337 | if (addr >= (unsigned long)__init_begin && | 349 | if (addr >= (unsigned long)__init_begin && |
338 | addr + size <= (unsigned long)__init_end) | 350 | addr + size <= (unsigned long)__init_end) |
339 | return 1; | 351 | return 1; |
340 | if (addr >= L1_SCRATCH_START | 352 | if (addr >= get_l1_scratch_start() |
341 | && addr + size <= L1_SCRATCH_START + L1_SCRATCH_LENGTH) | 353 | && addr + size <= get_l1_scratch_start() + L1_SCRATCH_LENGTH) |
342 | return 1; | 354 | return 1; |
343 | #if L1_CODE_LENGTH != 0 | 355 | #if L1_CODE_LENGTH != 0 |
344 | if (addr >= L1_CODE_START + (_etext_l1 - _stext_l1) | 356 | if (addr >= get_l1_code_start() + (_etext_l1 - _stext_l1) |
345 | && addr + size <= L1_CODE_START + L1_CODE_LENGTH) | 357 | && addr + size <= get_l1_code_start() + L1_CODE_LENGTH) |
346 | return 1; | 358 | return 1; |
347 | #endif | 359 | #endif |
348 | #if L1_DATA_A_LENGTH != 0 | 360 | #if L1_DATA_A_LENGTH != 0 |
349 | if (addr >= L1_DATA_A_START + (_ebss_l1 - _sdata_l1) | 361 | if (addr >= get_l1_data_a_start() + (_ebss_l1 - _sdata_l1) |
350 | && addr + size <= L1_DATA_A_START + L1_DATA_A_LENGTH) | 362 | && addr + size <= get_l1_data_a_start() + L1_DATA_A_LENGTH) |
351 | return 1; | 363 | return 1; |
352 | #endif | 364 | #endif |
353 | #if L1_DATA_B_LENGTH != 0 | 365 | #if L1_DATA_B_LENGTH != 0 |
354 | if (addr >= L1_DATA_B_START + (_ebss_b_l1 - _sdata_b_l1) | 366 | if (addr >= get_l1_data_b_start() + (_ebss_b_l1 - _sdata_b_l1) |
355 | && addr + size <= L1_DATA_B_START + L1_DATA_B_LENGTH) | 367 | && addr + size <= get_l1_data_b_start() + L1_DATA_B_LENGTH) |
356 | return 1; | 368 | return 1; |
357 | #endif | 369 | #endif |
358 | #if L2_LENGTH != 0 | 370 | #if L2_LENGTH != 0 |
diff --git a/arch/blackfin/kernel/ptrace.c b/arch/blackfin/kernel/ptrace.c index 140bf00e9974..d2d388536630 100644 --- a/arch/blackfin/kernel/ptrace.c +++ b/arch/blackfin/kernel/ptrace.c | |||
@@ -45,6 +45,7 @@ | |||
45 | #include <asm/asm-offsets.h> | 45 | #include <asm/asm-offsets.h> |
46 | #include <asm/dma.h> | 46 | #include <asm/dma.h> |
47 | #include <asm/fixed_code.h> | 47 | #include <asm/fixed_code.h> |
48 | #include <asm/mem_map.h> | ||
48 | 49 | ||
49 | #define TEXT_OFFSET 0 | 50 | #define TEXT_OFFSET 0 |
50 | /* | 51 | /* |
@@ -80,10 +81,12 @@ static inline struct pt_regs *get_user_regs(struct task_struct *task) | |||
80 | /* | 81 | /* |
81 | * Get all user integer registers. | 82 | * Get all user integer registers. |
82 | */ | 83 | */ |
83 | static inline int ptrace_getregs(struct task_struct *tsk, void __user * uregs) | 84 | static inline int ptrace_getregs(struct task_struct *tsk, void __user *uregs) |
84 | { | 85 | { |
85 | struct pt_regs *regs = get_user_regs(tsk); | 86 | struct pt_regs regs; |
86 | return copy_to_user(uregs, regs, sizeof(struct pt_regs)) ? -EFAULT : 0; | 87 | memcpy(®s, get_user_regs(tsk), sizeof(regs)); |
88 | regs.usp = tsk->thread.usp; | ||
89 | return copy_to_user(uregs, ®s, sizeof(struct pt_regs)) ? -EFAULT : 0; | ||
87 | } | 90 | } |
88 | 91 | ||
89 | /* Mapping from PT_xxx to the stack offset at which the register is | 92 | /* Mapping from PT_xxx to the stack offset at which the register is |
@@ -220,8 +223,8 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) | |||
220 | break; | 223 | break; |
221 | pr_debug("ptrace: user address is valid\n"); | 224 | pr_debug("ptrace: user address is valid\n"); |
222 | 225 | ||
223 | if (L1_CODE_LENGTH != 0 && addr >= L1_CODE_START | 226 | if (L1_CODE_LENGTH != 0 && addr >= get_l1_code_start() |
224 | && addr + sizeof(tmp) <= L1_CODE_START + L1_CODE_LENGTH) { | 227 | && addr + sizeof(tmp) <= get_l1_code_start() + L1_CODE_LENGTH) { |
225 | safe_dma_memcpy (&tmp, (const void *)(addr), sizeof(tmp)); | 228 | safe_dma_memcpy (&tmp, (const void *)(addr), sizeof(tmp)); |
226 | copied = sizeof(tmp); | 229 | copied = sizeof(tmp); |
227 | 230 | ||
@@ -300,8 +303,8 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) | |||
300 | break; | 303 | break; |
301 | pr_debug("ptrace: user address is valid\n"); | 304 | pr_debug("ptrace: user address is valid\n"); |
302 | 305 | ||
303 | if (L1_CODE_LENGTH != 0 && addr >= L1_CODE_START | 306 | if (L1_CODE_LENGTH != 0 && addr >= get_l1_code_start() |
304 | && addr + sizeof(data) <= L1_CODE_START + L1_CODE_LENGTH) { | 307 | && addr + sizeof(data) <= get_l1_code_start() + L1_CODE_LENGTH) { |
305 | safe_dma_memcpy ((void *)(addr), &data, sizeof(data)); | 308 | safe_dma_memcpy ((void *)(addr), &data, sizeof(data)); |
306 | copied = sizeof(data); | 309 | copied = sizeof(data); |
307 | 310 | ||
diff --git a/arch/blackfin/kernel/reboot.c b/arch/blackfin/kernel/reboot.c index ae97ca407b0d..eeee8cb43360 100644 --- a/arch/blackfin/kernel/reboot.c +++ b/arch/blackfin/kernel/reboot.c | |||
@@ -21,7 +21,7 @@ | |||
21 | * the core reset. | 21 | * the core reset. |
22 | */ | 22 | */ |
23 | __attribute__((l1_text)) | 23 | __attribute__((l1_text)) |
24 | static void bfin_reset(void) | 24 | static void _bfin_reset(void) |
25 | { | 25 | { |
26 | /* Wait for completion of "system" events such as cache line | 26 | /* Wait for completion of "system" events such as cache line |
27 | * line fills so that we avoid infinite stalls later on as | 27 | * line fills so that we avoid infinite stalls later on as |
@@ -66,6 +66,18 @@ static void bfin_reset(void) | |||
66 | } | 66 | } |
67 | } | 67 | } |
68 | 68 | ||
69 | static void bfin_reset(void) | ||
70 | { | ||
71 | if (ANOMALY_05000353 || ANOMALY_05000386) | ||
72 | _bfin_reset(); | ||
73 | else | ||
74 | /* the bootrom checks to see how it was reset and will | ||
75 | * automatically perform a software reset for us when | ||
76 | * it starts executing boot | ||
77 | */ | ||
78 | asm("raise 1;"); | ||
79 | } | ||
80 | |||
69 | __attribute__((weak)) | 81 | __attribute__((weak)) |
70 | void native_machine_restart(char *cmd) | 82 | void native_machine_restart(char *cmd) |
71 | { | 83 | { |
@@ -75,14 +87,10 @@ void machine_restart(char *cmd) | |||
75 | { | 87 | { |
76 | native_machine_restart(cmd); | 88 | native_machine_restart(cmd); |
77 | local_irq_disable(); | 89 | local_irq_disable(); |
78 | if (ANOMALY_05000353 || ANOMALY_05000386) | 90 | if (smp_processor_id()) |
79 | bfin_reset(); | 91 | smp_call_function((void *)bfin_reset, 0, 1); |
80 | else | 92 | else |
81 | /* the bootrom checks to see how it was reset and will | 93 | bfin_reset(); |
82 | * automatically perform a software reset for us when | ||
83 | * it starts executing boot | ||
84 | */ | ||
85 | asm("raise 1;"); | ||
86 | } | 94 | } |
87 | 95 | ||
88 | __attribute__((weak)) | 96 | __attribute__((weak)) |
diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c index 71a9a8c53cea..b2a811347b65 100644 --- a/arch/blackfin/kernel/setup.c +++ b/arch/blackfin/kernel/setup.c | |||
@@ -13,6 +13,7 @@ | |||
13 | #include <linux/bootmem.h> | 13 | #include <linux/bootmem.h> |
14 | #include <linux/seq_file.h> | 14 | #include <linux/seq_file.h> |
15 | #include <linux/cpu.h> | 15 | #include <linux/cpu.h> |
16 | #include <linux/mm.h> | ||
16 | #include <linux/module.h> | 17 | #include <linux/module.h> |
17 | #include <linux/tty.h> | 18 | #include <linux/tty.h> |
18 | #include <linux/pfn.h> | 19 | #include <linux/pfn.h> |
@@ -26,11 +27,10 @@ | |||
26 | #include <asm/blackfin.h> | 27 | #include <asm/blackfin.h> |
27 | #include <asm/cplbinit.h> | 28 | #include <asm/cplbinit.h> |
28 | #include <asm/div64.h> | 29 | #include <asm/div64.h> |
30 | #include <asm/cpu.h> | ||
29 | #include <asm/fixed_code.h> | 31 | #include <asm/fixed_code.h> |
30 | #include <asm/early_printk.h> | 32 | #include <asm/early_printk.h> |
31 | 33 | ||
32 | static DEFINE_PER_CPU(struct cpu, cpu_devices); | ||
33 | |||
34 | u16 _bfin_swrst; | 34 | u16 _bfin_swrst; |
35 | EXPORT_SYMBOL(_bfin_swrst); | 35 | EXPORT_SYMBOL(_bfin_swrst); |
36 | 36 | ||
@@ -79,27 +79,68 @@ static struct change_member *change_point[2*BFIN_MEMMAP_MAX] __initdata; | |||
79 | static struct bfin_memmap_entry *overlap_list[BFIN_MEMMAP_MAX] __initdata; | 79 | static struct bfin_memmap_entry *overlap_list[BFIN_MEMMAP_MAX] __initdata; |
80 | static struct bfin_memmap_entry new_map[BFIN_MEMMAP_MAX] __initdata; | 80 | static struct bfin_memmap_entry new_map[BFIN_MEMMAP_MAX] __initdata; |
81 | 81 | ||
82 | void __init bfin_cache_init(void) | 82 | DEFINE_PER_CPU(struct blackfin_cpudata, cpu_data); |
83 | { | 83 | |
84 | static int early_init_clkin_hz(char *buf); | ||
85 | |||
84 | #if defined(CONFIG_BFIN_DCACHE) || defined(CONFIG_BFIN_ICACHE) | 86 | #if defined(CONFIG_BFIN_DCACHE) || defined(CONFIG_BFIN_ICACHE) |
85 | generate_cplb_tables(); | 87 | void __init generate_cplb_tables(void) |
88 | { | ||
89 | unsigned int cpu; | ||
90 | |||
91 | generate_cplb_tables_all(); | ||
92 | /* Generate per-CPU I&D CPLB tables */ | ||
93 | for (cpu = 0; cpu < num_possible_cpus(); ++cpu) | ||
94 | generate_cplb_tables_cpu(cpu); | ||
95 | } | ||
86 | #endif | 96 | #endif |
87 | 97 | ||
98 | void __cpuinit bfin_setup_caches(unsigned int cpu) | ||
99 | { | ||
88 | #ifdef CONFIG_BFIN_ICACHE | 100 | #ifdef CONFIG_BFIN_ICACHE |
89 | bfin_icache_init(); | 101 | bfin_icache_init(icplb_tbl[cpu]); |
90 | printk(KERN_INFO "Instruction Cache Enabled\n"); | ||
91 | #endif | 102 | #endif |
92 | 103 | ||
93 | #ifdef CONFIG_BFIN_DCACHE | 104 | #ifdef CONFIG_BFIN_DCACHE |
94 | bfin_dcache_init(); | 105 | bfin_dcache_init(dcplb_tbl[cpu]); |
95 | printk(KERN_INFO "Data Cache Enabled" | 106 | #endif |
107 | |||
108 | /* | ||
109 | * In cache coherence emulation mode, we need to have the | ||
110 | * D-cache enabled before running any atomic operation which | ||
111 | * might invove cache invalidation (i.e. spinlock, rwlock). | ||
112 | * So printk's are deferred until then. | ||
113 | */ | ||
114 | #ifdef CONFIG_BFIN_ICACHE | ||
115 | printk(KERN_INFO "Instruction Cache Enabled for CPU%u\n", cpu); | ||
116 | #endif | ||
117 | #ifdef CONFIG_BFIN_DCACHE | ||
118 | printk(KERN_INFO "Data Cache Enabled for CPU%u" | ||
96 | # if defined CONFIG_BFIN_WB | 119 | # if defined CONFIG_BFIN_WB |
97 | " (write-back)" | 120 | " (write-back)" |
98 | # elif defined CONFIG_BFIN_WT | 121 | # elif defined CONFIG_BFIN_WT |
99 | " (write-through)" | 122 | " (write-through)" |
100 | # endif | 123 | # endif |
101 | "\n"); | 124 | "\n", cpu); |
125 | #endif | ||
126 | } | ||
127 | |||
128 | void __cpuinit bfin_setup_cpudata(unsigned int cpu) | ||
129 | { | ||
130 | struct blackfin_cpudata *cpudata = &per_cpu(cpu_data, cpu); | ||
131 | |||
132 | cpudata->idle = current; | ||
133 | cpudata->loops_per_jiffy = loops_per_jiffy; | ||
134 | cpudata->imemctl = bfin_read_IMEM_CONTROL(); | ||
135 | cpudata->dmemctl = bfin_read_DMEM_CONTROL(); | ||
136 | } | ||
137 | |||
138 | void __init bfin_cache_init(void) | ||
139 | { | ||
140 | #if defined(CONFIG_BFIN_DCACHE) || defined(CONFIG_BFIN_ICACHE) | ||
141 | generate_cplb_tables(); | ||
102 | #endif | 142 | #endif |
143 | bfin_setup_caches(0); | ||
103 | } | 144 | } |
104 | 145 | ||
105 | void __init bfin_relocate_l1_mem(void) | 146 | void __init bfin_relocate_l1_mem(void) |
@@ -109,6 +150,8 @@ void __init bfin_relocate_l1_mem(void) | |||
109 | unsigned long l1_data_b_length; | 150 | unsigned long l1_data_b_length; |
110 | unsigned long l2_length; | 151 | unsigned long l2_length; |
111 | 152 | ||
153 | blackfin_dma_early_init(); | ||
154 | |||
112 | l1_code_length = _etext_l1 - _stext_l1; | 155 | l1_code_length = _etext_l1 - _stext_l1; |
113 | if (l1_code_length > L1_CODE_LENGTH) | 156 | if (l1_code_length > L1_CODE_LENGTH) |
114 | panic("L1 Instruction SRAM Overflow\n"); | 157 | panic("L1 Instruction SRAM Overflow\n"); |
@@ -230,7 +273,7 @@ static int __init sanitize_memmap(struct bfin_memmap_entry *map, int *pnr_map) | |||
230 | /* record all known change-points (starting and ending addresses), | 273 | /* record all known change-points (starting and ending addresses), |
231 | omitting those that are for empty memory regions */ | 274 | omitting those that are for empty memory regions */ |
232 | chgidx = 0; | 275 | chgidx = 0; |
233 | for (i = 0; i < old_nr; i++) { | 276 | for (i = 0; i < old_nr; i++) { |
234 | if (map[i].size != 0) { | 277 | if (map[i].size != 0) { |
235 | change_point[chgidx]->addr = map[i].addr; | 278 | change_point[chgidx]->addr = map[i].addr; |
236 | change_point[chgidx++]->pentry = &map[i]; | 279 | change_point[chgidx++]->pentry = &map[i]; |
@@ -238,13 +281,13 @@ static int __init sanitize_memmap(struct bfin_memmap_entry *map, int *pnr_map) | |||
238 | change_point[chgidx++]->pentry = &map[i]; | 281 | change_point[chgidx++]->pentry = &map[i]; |
239 | } | 282 | } |
240 | } | 283 | } |
241 | chg_nr = chgidx; /* true number of change-points */ | 284 | chg_nr = chgidx; /* true number of change-points */ |
242 | 285 | ||
243 | /* sort change-point list by memory addresses (low -> high) */ | 286 | /* sort change-point list by memory addresses (low -> high) */ |
244 | still_changing = 1; | 287 | still_changing = 1; |
245 | while (still_changing) { | 288 | while (still_changing) { |
246 | still_changing = 0; | 289 | still_changing = 0; |
247 | for (i = 1; i < chg_nr; i++) { | 290 | for (i = 1; i < chg_nr; i++) { |
248 | /* if <current_addr> > <last_addr>, swap */ | 291 | /* if <current_addr> > <last_addr>, swap */ |
249 | /* or, if current=<start_addr> & last=<end_addr>, swap */ | 292 | /* or, if current=<start_addr> & last=<end_addr>, swap */ |
250 | if ((change_point[i]->addr < change_point[i-1]->addr) || | 293 | if ((change_point[i]->addr < change_point[i-1]->addr) || |
@@ -261,10 +304,10 @@ static int __init sanitize_memmap(struct bfin_memmap_entry *map, int *pnr_map) | |||
261 | } | 304 | } |
262 | 305 | ||
263 | /* create a new memmap, removing overlaps */ | 306 | /* create a new memmap, removing overlaps */ |
264 | overlap_entries = 0; /* number of entries in the overlap table */ | 307 | overlap_entries = 0; /* number of entries in the overlap table */ |
265 | new_entry = 0; /* index for creating new memmap entries */ | 308 | new_entry = 0; /* index for creating new memmap entries */ |
266 | last_type = 0; /* start with undefined memory type */ | 309 | last_type = 0; /* start with undefined memory type */ |
267 | last_addr = 0; /* start with 0 as last starting address */ | 310 | last_addr = 0; /* start with 0 as last starting address */ |
268 | /* loop through change-points, determining affect on the new memmap */ | 311 | /* loop through change-points, determining affect on the new memmap */ |
269 | for (chgidx = 0; chgidx < chg_nr; chgidx++) { | 312 | for (chgidx = 0; chgidx < chg_nr; chgidx++) { |
270 | /* keep track of all overlapping memmap entries */ | 313 | /* keep track of all overlapping memmap entries */ |
@@ -286,14 +329,14 @@ static int __init sanitize_memmap(struct bfin_memmap_entry *map, int *pnr_map) | |||
286 | if (overlap_list[i]->type > current_type) | 329 | if (overlap_list[i]->type > current_type) |
287 | current_type = overlap_list[i]->type; | 330 | current_type = overlap_list[i]->type; |
288 | /* continue building up new memmap based on this information */ | 331 | /* continue building up new memmap based on this information */ |
289 | if (current_type != last_type) { | 332 | if (current_type != last_type) { |
290 | if (last_type != 0) { | 333 | if (last_type != 0) { |
291 | new_map[new_entry].size = | 334 | new_map[new_entry].size = |
292 | change_point[chgidx]->addr - last_addr; | 335 | change_point[chgidx]->addr - last_addr; |
293 | /* move forward only if the new size was non-zero */ | 336 | /* move forward only if the new size was non-zero */ |
294 | if (new_map[new_entry].size != 0) | 337 | if (new_map[new_entry].size != 0) |
295 | if (++new_entry >= BFIN_MEMMAP_MAX) | 338 | if (++new_entry >= BFIN_MEMMAP_MAX) |
296 | break; /* no more space left for new entries */ | 339 | break; /* no more space left for new entries */ |
297 | } | 340 | } |
298 | if (current_type != 0) { | 341 | if (current_type != 0) { |
299 | new_map[new_entry].addr = change_point[chgidx]->addr; | 342 | new_map[new_entry].addr = change_point[chgidx]->addr; |
@@ -303,9 +346,9 @@ static int __init sanitize_memmap(struct bfin_memmap_entry *map, int *pnr_map) | |||
303 | last_type = current_type; | 346 | last_type = current_type; |
304 | } | 347 | } |
305 | } | 348 | } |
306 | new_nr = new_entry; /* retain count for new entries */ | 349 | new_nr = new_entry; /* retain count for new entries */ |
307 | 350 | ||
308 | /* copy new mapping into original location */ | 351 | /* copy new mapping into original location */ |
309 | memcpy(map, new_map, new_nr*sizeof(struct bfin_memmap_entry)); | 352 | memcpy(map, new_map, new_nr*sizeof(struct bfin_memmap_entry)); |
310 | *pnr_map = new_nr; | 353 | *pnr_map = new_nr; |
311 | 354 | ||
@@ -361,7 +404,6 @@ static __init int parse_memmap(char *arg) | |||
361 | * - "memmap=XXX[KkmM][@][$]XXX[KkmM]" defines a memory region | 404 | * - "memmap=XXX[KkmM][@][$]XXX[KkmM]" defines a memory region |
362 | * @ from <start> to <start>+<mem>, type RAM | 405 | * @ from <start> to <start>+<mem>, type RAM |
363 | * $ from <start> to <start>+<mem>, type RESERVED | 406 | * $ from <start> to <start>+<mem>, type RESERVED |
364 | * | ||
365 | */ | 407 | */ |
366 | static __init void parse_cmdline_early(char *cmdline_p) | 408 | static __init void parse_cmdline_early(char *cmdline_p) |
367 | { | 409 | { |
@@ -383,14 +425,15 @@ static __init void parse_cmdline_early(char *cmdline_p) | |||
383 | if (*to != ' ') { | 425 | if (*to != ' ') { |
384 | if (*to == '$' | 426 | if (*to == '$' |
385 | || *(to + 1) == '$') | 427 | || *(to + 1) == '$') |
386 | reserved_mem_dcache_on = | 428 | reserved_mem_dcache_on = 1; |
387 | 1; | ||
388 | if (*to == '#' | 429 | if (*to == '#' |
389 | || *(to + 1) == '#') | 430 | || *(to + 1) == '#') |
390 | reserved_mem_icache_on = | 431 | reserved_mem_icache_on = 1; |
391 | 1; | ||
392 | } | 432 | } |
393 | } | 433 | } |
434 | } else if (!memcmp(to, "clkin_hz=", 9)) { | ||
435 | to += 9; | ||
436 | early_init_clkin_hz(to); | ||
394 | } else if (!memcmp(to, "earlyprintk=", 12)) { | 437 | } else if (!memcmp(to, "earlyprintk=", 12)) { |
395 | to += 12; | 438 | to += 12; |
396 | setup_early_printk(to); | 439 | setup_early_printk(to); |
@@ -417,9 +460,8 @@ static __init void parse_cmdline_early(char *cmdline_p) | |||
417 | * [_ramend - DMA_UNCACHED_REGION, | 460 | * [_ramend - DMA_UNCACHED_REGION, |
418 | * _ramend]: uncached DMA region | 461 | * _ramend]: uncached DMA region |
419 | * [_ramend, physical_mem_end]: memory not managed by kernel | 462 | * [_ramend, physical_mem_end]: memory not managed by kernel |
420 | * | ||
421 | */ | 463 | */ |
422 | static __init void memory_setup(void) | 464 | static __init void memory_setup(void) |
423 | { | 465 | { |
424 | #ifdef CONFIG_MTD_UCLINUX | 466 | #ifdef CONFIG_MTD_UCLINUX |
425 | unsigned long mtd_phys = 0; | 467 | unsigned long mtd_phys = 0; |
@@ -436,7 +478,7 @@ static __init void memory_setup(void) | |||
436 | memory_end = _ramend - DMA_UNCACHED_REGION; | 478 | memory_end = _ramend - DMA_UNCACHED_REGION; |
437 | 479 | ||
438 | #ifdef CONFIG_MPU | 480 | #ifdef CONFIG_MPU |
439 | /* Round up to multiple of 4MB. */ | 481 | /* Round up to multiple of 4MB */ |
440 | memory_start = (_ramstart + 0x3fffff) & ~0x3fffff; | 482 | memory_start = (_ramstart + 0x3fffff) & ~0x3fffff; |
441 | #else | 483 | #else |
442 | memory_start = PAGE_ALIGN(_ramstart); | 484 | memory_start = PAGE_ALIGN(_ramstart); |
@@ -616,7 +658,7 @@ static __init void setup_bootmem_allocator(void) | |||
616 | end_pfn = memory_end >> PAGE_SHIFT; | 658 | end_pfn = memory_end >> PAGE_SHIFT; |
617 | 659 | ||
618 | /* | 660 | /* |
619 | * give all the memory to the bootmap allocator, tell it to put the | 661 | * give all the memory to the bootmap allocator, tell it to put the |
620 | * boot mem_map at the start of memory. | 662 | * boot mem_map at the start of memory. |
621 | */ | 663 | */ |
622 | bootmap_size = init_bootmem_node(NODE_DATA(0), | 664 | bootmap_size = init_bootmem_node(NODE_DATA(0), |
@@ -791,7 +833,11 @@ void __init setup_arch(char **cmdline_p) | |||
791 | bfin_write_SWRST(_bfin_swrst | DOUBLE_FAULT); | 833 | bfin_write_SWRST(_bfin_swrst | DOUBLE_FAULT); |
792 | #endif | 834 | #endif |
793 | 835 | ||
836 | #ifdef CONFIG_SMP | ||
837 | if (_bfin_swrst & SWRST_DBL_FAULT_A) { | ||
838 | #else | ||
794 | if (_bfin_swrst & RESET_DOUBLE) { | 839 | if (_bfin_swrst & RESET_DOUBLE) { |
840 | #endif | ||
795 | printk(KERN_EMERG "Recovering from DOUBLE FAULT event\n"); | 841 | printk(KERN_EMERG "Recovering from DOUBLE FAULT event\n"); |
796 | #ifdef CONFIG_DEBUG_DOUBLEFAULT | 842 | #ifdef CONFIG_DEBUG_DOUBLEFAULT |
797 | /* We assume the crashing kernel, and the current symbol table match */ | 843 | /* We assume the crashing kernel, and the current symbol table match */ |
@@ -823,9 +869,12 @@ void __init setup_arch(char **cmdline_p) | |||
823 | if (bfin_compiled_revid() == -1) | 869 | if (bfin_compiled_revid() == -1) |
824 | printk(KERN_ERR "Warning: Compiled for Rev none, but running on Rev %d\n", | 870 | printk(KERN_ERR "Warning: Compiled for Rev none, but running on Rev %d\n", |
825 | bfin_revid()); | 871 | bfin_revid()); |
826 | else if (bfin_compiled_revid() != 0xffff) | 872 | else if (bfin_compiled_revid() != 0xffff) { |
827 | printk(KERN_ERR "Warning: Compiled for Rev %d, but running on Rev %d\n", | 873 | printk(KERN_ERR "Warning: Compiled for Rev %d, but running on Rev %d\n", |
828 | bfin_compiled_revid(), bfin_revid()); | 874 | bfin_compiled_revid(), bfin_revid()); |
875 | if (bfin_compiled_revid() > bfin_revid()) | ||
876 | panic("Error: you are missing anomaly workarounds for this rev\n"); | ||
877 | } | ||
829 | } | 878 | } |
830 | if (bfin_revid() < CONFIG_BF_REV_MIN || bfin_revid() > CONFIG_BF_REV_MAX) | 879 | if (bfin_revid() < CONFIG_BF_REV_MIN || bfin_revid() > CONFIG_BF_REV_MAX) |
831 | printk(KERN_ERR "Warning: Unsupported Chip Revision ADSP-%s Rev 0.%d detected\n", | 880 | printk(KERN_ERR "Warning: Unsupported Chip Revision ADSP-%s Rev 0.%d detected\n", |
@@ -835,7 +884,7 @@ void __init setup_arch(char **cmdline_p) | |||
835 | printk(KERN_INFO "Blackfin Linux support by http://blackfin.uclinux.org/\n"); | 884 | printk(KERN_INFO "Blackfin Linux support by http://blackfin.uclinux.org/\n"); |
836 | 885 | ||
837 | printk(KERN_INFO "Processor Speed: %lu MHz core clock and %lu MHz System Clock\n", | 886 | printk(KERN_INFO "Processor Speed: %lu MHz core clock and %lu MHz System Clock\n", |
838 | cclk / 1000000, sclk / 1000000); | 887 | cclk / 1000000, sclk / 1000000); |
839 | 888 | ||
840 | if (ANOMALY_05000273 && (cclk >> 1) <= sclk) | 889 | if (ANOMALY_05000273 && (cclk >> 1) <= sclk) |
841 | printk("\n\n\nANOMALY_05000273: CCLK must be >= 2*SCLK !!!\n\n\n"); | 890 | printk("\n\n\nANOMALY_05000273: CCLK must be >= 2*SCLK !!!\n\n\n"); |
@@ -867,18 +916,21 @@ void __init setup_arch(char **cmdline_p) | |||
867 | BUG_ON((char *)&safe_user_instruction - (char *)&fixed_code_start | 916 | BUG_ON((char *)&safe_user_instruction - (char *)&fixed_code_start |
868 | != SAFE_USER_INSTRUCTION - FIXED_CODE_START); | 917 | != SAFE_USER_INSTRUCTION - FIXED_CODE_START); |
869 | 918 | ||
919 | #ifdef CONFIG_SMP | ||
920 | platform_init_cpus(); | ||
921 | #endif | ||
870 | init_exception_vectors(); | 922 | init_exception_vectors(); |
871 | bfin_cache_init(); | 923 | bfin_cache_init(); /* Initialize caches for the boot CPU */ |
872 | } | 924 | } |
873 | 925 | ||
874 | static int __init topology_init(void) | 926 | static int __init topology_init(void) |
875 | { | 927 | { |
876 | int cpu; | 928 | unsigned int cpu; |
929 | /* Record CPU-private information for the boot processor. */ | ||
930 | bfin_setup_cpudata(0); | ||
877 | 931 | ||
878 | for_each_possible_cpu(cpu) { | 932 | for_each_possible_cpu(cpu) { |
879 | struct cpu *c = &per_cpu(cpu_devices, cpu); | 933 | register_cpu(&per_cpu(cpu_data, cpu).cpu, cpu); |
880 | |||
881 | register_cpu(c, cpu); | ||
882 | } | 934 | } |
883 | 935 | ||
884 | return 0; | 936 | return 0; |
@@ -886,36 +938,54 @@ static int __init topology_init(void) | |||
886 | 938 | ||
887 | subsys_initcall(topology_init); | 939 | subsys_initcall(topology_init); |
888 | 940 | ||
941 | /* Get the input clock frequency */ | ||
942 | static u_long cached_clkin_hz = CONFIG_CLKIN_HZ; | ||
943 | static u_long get_clkin_hz(void) | ||
944 | { | ||
945 | return cached_clkin_hz; | ||
946 | } | ||
947 | static int __init early_init_clkin_hz(char *buf) | ||
948 | { | ||
949 | cached_clkin_hz = simple_strtoul(buf, NULL, 0); | ||
950 | #ifdef BFIN_KERNEL_CLOCK | ||
951 | if (cached_clkin_hz != CONFIG_CLKIN_HZ) | ||
952 | panic("cannot change clkin_hz when reprogramming clocks"); | ||
953 | #endif | ||
954 | return 1; | ||
955 | } | ||
956 | early_param("clkin_hz=", early_init_clkin_hz); | ||
957 | |||
889 | /* Get the voltage input multiplier */ | 958 | /* Get the voltage input multiplier */ |
890 | static u_long cached_vco_pll_ctl, cached_vco; | ||
891 | static u_long get_vco(void) | 959 | static u_long get_vco(void) |
892 | { | 960 | { |
893 | u_long msel; | 961 | static u_long cached_vco; |
962 | u_long msel, pll_ctl; | ||
894 | 963 | ||
895 | u_long pll_ctl = bfin_read_PLL_CTL(); | 964 | /* The assumption here is that VCO never changes at runtime. |
896 | if (pll_ctl == cached_vco_pll_ctl) | 965 | * If, someday, we support that, then we'll have to change this. |
966 | */ | ||
967 | if (cached_vco) | ||
897 | return cached_vco; | 968 | return cached_vco; |
898 | else | ||
899 | cached_vco_pll_ctl = pll_ctl; | ||
900 | 969 | ||
970 | pll_ctl = bfin_read_PLL_CTL(); | ||
901 | msel = (pll_ctl >> 9) & 0x3F; | 971 | msel = (pll_ctl >> 9) & 0x3F; |
902 | if (0 == msel) | 972 | if (0 == msel) |
903 | msel = 64; | 973 | msel = 64; |
904 | 974 | ||
905 | cached_vco = CONFIG_CLKIN_HZ; | 975 | cached_vco = get_clkin_hz(); |
906 | cached_vco >>= (1 & pll_ctl); /* DF bit */ | 976 | cached_vco >>= (1 & pll_ctl); /* DF bit */ |
907 | cached_vco *= msel; | 977 | cached_vco *= msel; |
908 | return cached_vco; | 978 | return cached_vco; |
909 | } | 979 | } |
910 | 980 | ||
911 | /* Get the Core clock */ | 981 | /* Get the Core clock */ |
912 | static u_long cached_cclk_pll_div, cached_cclk; | ||
913 | u_long get_cclk(void) | 982 | u_long get_cclk(void) |
914 | { | 983 | { |
984 | static u_long cached_cclk_pll_div, cached_cclk; | ||
915 | u_long csel, ssel; | 985 | u_long csel, ssel; |
916 | 986 | ||
917 | if (bfin_read_PLL_STAT() & 0x1) | 987 | if (bfin_read_PLL_STAT() & 0x1) |
918 | return CONFIG_CLKIN_HZ; | 988 | return get_clkin_hz(); |
919 | 989 | ||
920 | ssel = bfin_read_PLL_DIV(); | 990 | ssel = bfin_read_PLL_DIV(); |
921 | if (ssel == cached_cclk_pll_div) | 991 | if (ssel == cached_cclk_pll_div) |
@@ -934,21 +1004,21 @@ u_long get_cclk(void) | |||
934 | EXPORT_SYMBOL(get_cclk); | 1004 | EXPORT_SYMBOL(get_cclk); |
935 | 1005 | ||
936 | /* Get the System clock */ | 1006 | /* Get the System clock */ |
937 | static u_long cached_sclk_pll_div, cached_sclk; | ||
938 | u_long get_sclk(void) | 1007 | u_long get_sclk(void) |
939 | { | 1008 | { |
1009 | static u_long cached_sclk; | ||
940 | u_long ssel; | 1010 | u_long ssel; |
941 | 1011 | ||
942 | if (bfin_read_PLL_STAT() & 0x1) | 1012 | /* The assumption here is that SCLK never changes at runtime. |
943 | return CONFIG_CLKIN_HZ; | 1013 | * If, someday, we support that, then we'll have to change this. |
944 | 1014 | */ | |
945 | ssel = bfin_read_PLL_DIV(); | 1015 | if (cached_sclk) |
946 | if (ssel == cached_sclk_pll_div) | ||
947 | return cached_sclk; | 1016 | return cached_sclk; |
948 | else | ||
949 | cached_sclk_pll_div = ssel; | ||
950 | 1017 | ||
951 | ssel &= 0xf; | 1018 | if (bfin_read_PLL_STAT() & 0x1) |
1019 | return get_clkin_hz(); | ||
1020 | |||
1021 | ssel = bfin_read_PLL_DIV() & 0xf; | ||
952 | if (0 == ssel) { | 1022 | if (0 == ssel) { |
953 | printk(KERN_WARNING "Invalid System Clock\n"); | 1023 | printk(KERN_WARNING "Invalid System Clock\n"); |
954 | ssel = 1; | 1024 | ssel = 1; |
@@ -982,17 +1052,18 @@ static int show_cpuinfo(struct seq_file *m, void *v) | |||
982 | { | 1052 | { |
983 | char *cpu, *mmu, *fpu, *vendor, *cache; | 1053 | char *cpu, *mmu, *fpu, *vendor, *cache; |
984 | uint32_t revid; | 1054 | uint32_t revid; |
985 | 1055 | int cpu_num = *(unsigned int *)v; | |
986 | u_long cclk = 0, sclk = 0; | 1056 | u_long sclk, cclk; |
987 | u_int icache_size = BFIN_ICACHESIZE / 1024, dcache_size = 0, dsup_banks = 0; | 1057 | u_int icache_size = BFIN_ICACHESIZE / 1024, dcache_size = 0, dsup_banks = 0; |
1058 | struct blackfin_cpudata *cpudata = &per_cpu(cpu_data, cpu_num); | ||
988 | 1059 | ||
989 | cpu = CPU; | 1060 | cpu = CPU; |
990 | mmu = "none"; | 1061 | mmu = "none"; |
991 | fpu = "none"; | 1062 | fpu = "none"; |
992 | revid = bfin_revid(); | 1063 | revid = bfin_revid(); |
993 | 1064 | ||
994 | cclk = get_cclk(); | ||
995 | sclk = get_sclk(); | 1065 | sclk = get_sclk(); |
1066 | cclk = get_cclk(); | ||
996 | 1067 | ||
997 | switch (bfin_read_CHIPID() & CHIPID_MANUFACTURE) { | 1068 | switch (bfin_read_CHIPID() & CHIPID_MANUFACTURE) { |
998 | case 0xca: | 1069 | case 0xca: |
@@ -1003,10 +1074,7 @@ static int show_cpuinfo(struct seq_file *m, void *v) | |||
1003 | break; | 1074 | break; |
1004 | } | 1075 | } |
1005 | 1076 | ||
1006 | seq_printf(m, "processor\t: %d\n" | 1077 | seq_printf(m, "processor\t: %d\n" "vendor_id\t: %s\n", cpu_num, vendor); |
1007 | "vendor_id\t: %s\n", | ||
1008 | *(unsigned int *)v, | ||
1009 | vendor); | ||
1010 | 1078 | ||
1011 | if (CPUID == bfin_cpuid()) | 1079 | if (CPUID == bfin_cpuid()) |
1012 | seq_printf(m, "cpu family\t: 0x%04x\n", CPUID); | 1080 | seq_printf(m, "cpu family\t: 0x%04x\n", CPUID); |
@@ -1029,12 +1097,12 @@ static int show_cpuinfo(struct seq_file *m, void *v) | |||
1029 | sclk/1000000, sclk%1000000); | 1097 | sclk/1000000, sclk%1000000); |
1030 | seq_printf(m, "bogomips\t: %lu.%02lu\n" | 1098 | seq_printf(m, "bogomips\t: %lu.%02lu\n" |
1031 | "Calibration\t: %lu loops\n", | 1099 | "Calibration\t: %lu loops\n", |
1032 | (loops_per_jiffy * HZ) / 500000, | 1100 | (cpudata->loops_per_jiffy * HZ) / 500000, |
1033 | ((loops_per_jiffy * HZ) / 5000) % 100, | 1101 | ((cpudata->loops_per_jiffy * HZ) / 5000) % 100, |
1034 | (loops_per_jiffy * HZ)); | 1102 | (cpudata->loops_per_jiffy * HZ)); |
1035 | 1103 | ||
1036 | /* Check Cache configutation */ | 1104 | /* Check Cache configutation */ |
1037 | switch (bfin_read_DMEM_CONTROL() & (1 << DMC0_P | 1 << DMC1_P)) { | 1105 | switch (cpudata->dmemctl & (1 << DMC0_P | 1 << DMC1_P)) { |
1038 | case ACACHE_BSRAM: | 1106 | case ACACHE_BSRAM: |
1039 | cache = "dbank-A/B\t: cache/sram"; | 1107 | cache = "dbank-A/B\t: cache/sram"; |
1040 | dcache_size = 16; | 1108 | dcache_size = 16; |
@@ -1058,10 +1126,10 @@ static int show_cpuinfo(struct seq_file *m, void *v) | |||
1058 | } | 1126 | } |
1059 | 1127 | ||
1060 | /* Is it turned on? */ | 1128 | /* Is it turned on? */ |
1061 | if ((bfin_read_DMEM_CONTROL() & (ENDCPLB | DMC_ENABLE)) != (ENDCPLB | DMC_ENABLE)) | 1129 | if ((cpudata->dmemctl & (ENDCPLB | DMC_ENABLE)) != (ENDCPLB | DMC_ENABLE)) |
1062 | dcache_size = 0; | 1130 | dcache_size = 0; |
1063 | 1131 | ||
1064 | if ((bfin_read_IMEM_CONTROL() & (IMC | ENICPLB)) != (IMC | ENICPLB)) | 1132 | if ((cpudata->imemctl & (IMC | ENICPLB)) != (IMC | ENICPLB)) |
1065 | icache_size = 0; | 1133 | icache_size = 0; |
1066 | 1134 | ||
1067 | seq_printf(m, "cache size\t: %d KB(L1 icache) " | 1135 | seq_printf(m, "cache size\t: %d KB(L1 icache) " |
@@ -1086,8 +1154,11 @@ static int show_cpuinfo(struct seq_file *m, void *v) | |||
1086 | "dcache setup\t: %d Super-banks/%d Sub-banks/%d Ways, %d Lines/Way\n", | 1154 | "dcache setup\t: %d Super-banks/%d Sub-banks/%d Ways, %d Lines/Way\n", |
1087 | dsup_banks, BFIN_DSUBBANKS, BFIN_DWAYS, | 1155 | dsup_banks, BFIN_DSUBBANKS, BFIN_DWAYS, |
1088 | BFIN_DLINES); | 1156 | BFIN_DLINES); |
1157 | #ifdef __ARCH_SYNC_CORE_DCACHE | ||
1158 | seq_printf(m, "SMP Dcache Flushes\t: %lu\n\n", cpudata->dcache_invld_count); | ||
1159 | #endif | ||
1089 | #ifdef CONFIG_BFIN_ICACHE_LOCK | 1160 | #ifdef CONFIG_BFIN_ICACHE_LOCK |
1090 | switch ((bfin_read_IMEM_CONTROL() >> 3) & WAYALL_L) { | 1161 | switch ((cpudata->imemctl >> 3) & WAYALL_L) { |
1091 | case WAY0_L: | 1162 | case WAY0_L: |
1092 | seq_printf(m, "Way0 Locked-Down\n"); | 1163 | seq_printf(m, "Way0 Locked-Down\n"); |
1093 | break; | 1164 | break; |
@@ -1137,6 +1208,12 @@ static int show_cpuinfo(struct seq_file *m, void *v) | |||
1137 | seq_printf(m, "No Ways are locked\n"); | 1208 | seq_printf(m, "No Ways are locked\n"); |
1138 | } | 1209 | } |
1139 | #endif | 1210 | #endif |
1211 | |||
1212 | if (cpu_num != num_possible_cpus() - 1) | ||
1213 | return 0; | ||
1214 | |||
1215 | if (L2_LENGTH) | ||
1216 | seq_printf(m, "L2 SRAM\t\t: %dKB\n", L2_LENGTH/0x400); | ||
1140 | seq_printf(m, "board name\t: %s\n", bfin_board_name); | 1217 | seq_printf(m, "board name\t: %s\n", bfin_board_name); |
1141 | seq_printf(m, "board memory\t: %ld kB (0x%p -> 0x%p)\n", | 1218 | seq_printf(m, "board memory\t: %ld kB (0x%p -> 0x%p)\n", |
1142 | physical_mem_end >> 10, (void *)0, (void *)physical_mem_end); | 1219 | physical_mem_end >> 10, (void *)0, (void *)physical_mem_end); |
@@ -1144,6 +1221,7 @@ static int show_cpuinfo(struct seq_file *m, void *v) | |||
1144 | ((int)memory_end - (int)_stext) >> 10, | 1221 | ((int)memory_end - (int)_stext) >> 10, |
1145 | _stext, | 1222 | _stext, |
1146 | (void *)memory_end); | 1223 | (void *)memory_end); |
1224 | seq_printf(m, "\n"); | ||
1147 | 1225 | ||
1148 | return 0; | 1226 | return 0; |
1149 | } | 1227 | } |
diff --git a/arch/blackfin/kernel/time.c b/arch/blackfin/kernel/time.c index eb2352320454..172b4c588467 100644 --- a/arch/blackfin/kernel/time.c +++ b/arch/blackfin/kernel/time.c | |||
@@ -1,32 +1,11 @@ | |||
1 | /* | 1 | /* |
2 | * File: arch/blackfin/kernel/time.c | 2 | * arch/blackfin/kernel/time.c |
3 | * Based on: none - original work | ||
4 | * Author: | ||
5 | * | 3 | * |
6 | * Created: | 4 | * This file contains the Blackfin-specific time handling details. |
7 | * Description: This file contains the bfin-specific time handling details. | 5 | * Most of the stuff is located in the machine specific files. |
8 | * Most of the stuff is located in the machine specific files. | ||
9 | * FIXME: (This file is subject for removal) | ||
10 | * | 6 | * |
11 | * Modified: | 7 | * Copyright 2004-2008 Analog Devices Inc. |
12 | * Copyright 2004-2008 Analog Devices Inc. | 8 | * Licensed under the GPL-2 or later. |
13 | * | ||
14 | * Bugs: Enter bugs at http://blackfin.uclinux.org/ | ||
15 | * | ||
16 | * This program is free software; you can redistribute it and/or modify | ||
17 | * it under the terms of the GNU General Public License as published by | ||
18 | * the Free Software Foundation; either version 2 of the License, or | ||
19 | * (at your option) any later version. | ||
20 | * | ||
21 | * This program is distributed in the hope that it will be useful, | ||
22 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | ||
23 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | ||
24 | * GNU General Public License for more details. | ||
25 | * | ||
26 | * You should have received a copy of the GNU General Public License | ||
27 | * along with this program; if not, see the file COPYING, or write | ||
28 | * to the Free Software Foundation, Inc., | ||
29 | * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA | ||
30 | */ | 9 | */ |
31 | 10 | ||
32 | #include <linux/module.h> | 11 | #include <linux/module.h> |
@@ -34,23 +13,43 @@ | |||
34 | #include <linux/interrupt.h> | 13 | #include <linux/interrupt.h> |
35 | #include <linux/time.h> | 14 | #include <linux/time.h> |
36 | #include <linux/irq.h> | 15 | #include <linux/irq.h> |
16 | #include <linux/delay.h> | ||
37 | 17 | ||
38 | #include <asm/blackfin.h> | 18 | #include <asm/blackfin.h> |
39 | #include <asm/time.h> | 19 | #include <asm/time.h> |
20 | #include <asm/gptimers.h> | ||
40 | 21 | ||
41 | /* This is an NTP setting */ | 22 | /* This is an NTP setting */ |
42 | #define TICK_SIZE (tick_nsec / 1000) | 23 | #define TICK_SIZE (tick_nsec / 1000) |
43 | 24 | ||
44 | static void time_sched_init(irq_handler_t timer_routine); | ||
45 | static unsigned long gettimeoffset(void); | ||
46 | |||
47 | static struct irqaction bfin_timer_irq = { | 25 | static struct irqaction bfin_timer_irq = { |
48 | .name = "BFIN Timer Tick", | 26 | .name = "Blackfin Timer Tick", |
27 | #ifdef CONFIG_IRQ_PER_CPU | ||
28 | .flags = IRQF_DISABLED | IRQF_PERCPU, | ||
29 | #else | ||
49 | .flags = IRQF_DISABLED | 30 | .flags = IRQF_DISABLED |
31 | #endif | ||
50 | }; | 32 | }; |
51 | 33 | ||
52 | static void | 34 | #if defined(CONFIG_TICK_SOURCE_SYSTMR0) || defined(CONFIG_IPIPE) |
53 | time_sched_init(irq_handler_t timer_routine) | 35 | void __init setup_system_timer0(void) |
36 | { | ||
37 | /* Power down the core timer, just to play safe. */ | ||
38 | bfin_write_TCNTL(0); | ||
39 | |||
40 | disable_gptimers(TIMER0bit); | ||
41 | set_gptimer_status(0, TIMER_STATUS_TRUN0); | ||
42 | while (get_gptimer_status(0) & TIMER_STATUS_TRUN0) | ||
43 | udelay(10); | ||
44 | |||
45 | set_gptimer_config(0, 0x59); /* IRQ enable, periodic, PWM_OUT, SCLKed, OUT PAD disabled */ | ||
46 | set_gptimer_period(TIMER0_id, get_sclk() / HZ); | ||
47 | set_gptimer_pwidth(TIMER0_id, 1); | ||
48 | SSYNC(); | ||
49 | enable_gptimers(TIMER0bit); | ||
50 | } | ||
51 | #else | ||
52 | void __init setup_core_timer(void) | ||
54 | { | 53 | { |
55 | u32 tcount; | 54 | u32 tcount; |
56 | 55 | ||
@@ -58,10 +57,8 @@ time_sched_init(irq_handler_t timer_routine) | |||
58 | bfin_write_TCNTL(1); | 57 | bfin_write_TCNTL(1); |
59 | CSYNC(); | 58 | CSYNC(); |
60 | 59 | ||
61 | /* | 60 | /* the TSCALE prescaler counter */ |
62 | * the TSCALE prescaler counter. | 61 | bfin_write_TSCALE(TIME_SCALE - 1); |
63 | */ | ||
64 | bfin_write_TSCALE((TIME_SCALE - 1)); | ||
65 | 62 | ||
66 | tcount = ((get_cclk() / (HZ * TIME_SCALE)) - 1); | 63 | tcount = ((get_cclk() / (HZ * TIME_SCALE)) - 1); |
67 | bfin_write_TPERIOD(tcount); | 64 | bfin_write_TPERIOD(tcount); |
@@ -71,35 +68,52 @@ time_sched_init(irq_handler_t timer_routine) | |||
71 | CSYNC(); | 68 | CSYNC(); |
72 | 69 | ||
73 | bfin_write_TCNTL(7); | 70 | bfin_write_TCNTL(7); |
71 | } | ||
72 | #endif | ||
74 | 73 | ||
75 | bfin_timer_irq.handler = (irq_handler_t)timer_routine; | 74 | static void __init |
76 | /* call setup_irq instead of request_irq because request_irq calls | 75 | time_sched_init(irqreturn_t(*timer_routine) (int, void *)) |
77 | * kmalloc which has not been initialized yet | 76 | { |
78 | */ | 77 | #if defined(CONFIG_TICK_SOURCE_SYSTMR0) || defined(CONFIG_IPIPE) |
78 | setup_system_timer0(); | ||
79 | bfin_timer_irq.handler = timer_routine; | ||
80 | setup_irq(IRQ_TIMER0, &bfin_timer_irq); | ||
81 | #else | ||
82 | setup_core_timer(); | ||
83 | bfin_timer_irq.handler = timer_routine; | ||
79 | setup_irq(IRQ_CORETMR, &bfin_timer_irq); | 84 | setup_irq(IRQ_CORETMR, &bfin_timer_irq); |
85 | #endif | ||
80 | } | 86 | } |
81 | 87 | ||
82 | /* | 88 | /* |
83 | * Should return useconds since last timer tick | 89 | * Should return useconds since last timer tick |
84 | */ | 90 | */ |
91 | #ifndef CONFIG_GENERIC_TIME | ||
85 | static unsigned long gettimeoffset(void) | 92 | static unsigned long gettimeoffset(void) |
86 | { | 93 | { |
87 | unsigned long offset; | 94 | unsigned long offset; |
88 | unsigned long clocks_per_jiffy; | 95 | unsigned long clocks_per_jiffy; |
89 | 96 | ||
97 | #if defined(CONFIG_TICK_SOURCE_SYSTMR0) || defined(CONFIG_IPIPE) | ||
98 | clocks_per_jiffy = bfin_read_TIMER0_PERIOD(); | ||
99 | offset = bfin_read_TIMER0_COUNTER() / \ | ||
100 | (((clocks_per_jiffy + 1) * HZ) / USEC_PER_SEC); | ||
101 | |||
102 | if ((get_gptimer_status(0) & TIMER_STATUS_TIMIL0) && offset < (100000 / HZ / 2)) | ||
103 | offset += (USEC_PER_SEC / HZ); | ||
104 | #else | ||
90 | clocks_per_jiffy = bfin_read_TPERIOD(); | 105 | clocks_per_jiffy = bfin_read_TPERIOD(); |
91 | offset = | 106 | offset = (clocks_per_jiffy - bfin_read_TCOUNT()) / \ |
92 | (clocks_per_jiffy - | 107 | (((clocks_per_jiffy + 1) * HZ) / USEC_PER_SEC); |
93 | bfin_read_TCOUNT()) / (((clocks_per_jiffy + 1) * HZ) / | ||
94 | USEC_PER_SEC); | ||
95 | 108 | ||
96 | /* Check if we just wrapped the counters and maybe missed a tick */ | 109 | /* Check if we just wrapped the counters and maybe missed a tick */ |
97 | if ((bfin_read_ILAT() & (1 << IRQ_CORETMR)) | 110 | if ((bfin_read_ILAT() & (1 << IRQ_CORETMR)) |
98 | && (offset < (100000 / HZ / 2))) | 111 | && (offset < (100000 / HZ / 2))) |
99 | offset += (USEC_PER_SEC / HZ); | 112 | offset += (USEC_PER_SEC / HZ); |
100 | 113 | #endif | |
101 | return offset; | 114 | return offset; |
102 | } | 115 | } |
116 | #endif | ||
103 | 117 | ||
104 | static inline int set_rtc_mmss(unsigned long nowtime) | 118 | static inline int set_rtc_mmss(unsigned long nowtime) |
105 | { | 119 | { |
@@ -111,43 +125,49 @@ static inline int set_rtc_mmss(unsigned long nowtime) | |||
111 | * as well as call the "do_timer()" routine every clocktick | 125 | * as well as call the "do_timer()" routine every clocktick |
112 | */ | 126 | */ |
113 | #ifdef CONFIG_CORE_TIMER_IRQ_L1 | 127 | #ifdef CONFIG_CORE_TIMER_IRQ_L1 |
114 | irqreturn_t timer_interrupt(int irq, void *dummy)__attribute__((l1_text)); | 128 | __attribute__((l1_text)) |
115 | #endif | 129 | #endif |
116 | |||
117 | irqreturn_t timer_interrupt(int irq, void *dummy) | 130 | irqreturn_t timer_interrupt(int irq, void *dummy) |
118 | { | 131 | { |
119 | /* last time the cmos clock got updated */ | 132 | /* last time the cmos clock got updated */ |
120 | static long last_rtc_update; | 133 | static long last_rtc_update; |
121 | 134 | ||
122 | write_seqlock(&xtime_lock); | 135 | write_seqlock(&xtime_lock); |
123 | 136 | #if defined(CONFIG_TICK_SOURCE_SYSTMR0) && !defined(CONFIG_IPIPE) | |
124 | do_timer(1); | 137 | /* FIXME: Here TIMIL0 is not set when IPIPE enabled, why? */ |
125 | 138 | if (get_gptimer_status(0) & TIMER_STATUS_TIMIL0) { | |
126 | profile_tick(CPU_PROFILING); | 139 | #endif |
127 | 140 | do_timer(1); | |
128 | /* | 141 | |
129 | * If we have an externally synchronized Linux clock, then update | 142 | /* |
130 | * CMOS clock accordingly every ~11 minutes. Set_rtc_mmss() has to be | 143 | * If we have an externally synchronized Linux clock, then update |
131 | * called as close as possible to 500 ms before the new second starts. | 144 | * CMOS clock accordingly every ~11 minutes. Set_rtc_mmss() has to be |
132 | */ | 145 | * called as close as possible to 500 ms before the new second starts. |
133 | 146 | */ | |
134 | if (ntp_synced() && | 147 | if (ntp_synced() && |
135 | xtime.tv_sec > last_rtc_update + 660 && | 148 | xtime.tv_sec > last_rtc_update + 660 && |
136 | (xtime.tv_nsec / NSEC_PER_USEC) >= | 149 | (xtime.tv_nsec / NSEC_PER_USEC) >= |
137 | 500000 - ((unsigned)TICK_SIZE) / 2 | 150 | 500000 - ((unsigned)TICK_SIZE) / 2 |
138 | && (xtime.tv_nsec / NSEC_PER_USEC) <= | 151 | && (xtime.tv_nsec / NSEC_PER_USEC) <= |
139 | 500000 + ((unsigned)TICK_SIZE) / 2) { | 152 | 500000 + ((unsigned)TICK_SIZE) / 2) { |
140 | if (set_rtc_mmss(xtime.tv_sec) == 0) | 153 | if (set_rtc_mmss(xtime.tv_sec) == 0) |
141 | last_rtc_update = xtime.tv_sec; | 154 | last_rtc_update = xtime.tv_sec; |
142 | else | 155 | else |
143 | /* Do it again in 60s. */ | 156 | /* Do it again in 60s. */ |
144 | last_rtc_update = xtime.tv_sec - 600; | 157 | last_rtc_update = xtime.tv_sec - 600; |
158 | } | ||
159 | #if defined(CONFIG_TICK_SOURCE_SYSTMR0) && !defined(CONFIG_IPIPE) | ||
160 | set_gptimer_status(0, TIMER_STATUS_TIMIL0); | ||
145 | } | 161 | } |
162 | #endif | ||
146 | write_sequnlock(&xtime_lock); | 163 | write_sequnlock(&xtime_lock); |
147 | 164 | ||
148 | #ifndef CONFIG_SMP | 165 | #ifdef CONFIG_IPIPE |
166 | update_root_process_times(get_irq_regs()); | ||
167 | #else | ||
149 | update_process_times(user_mode(get_irq_regs())); | 168 | update_process_times(user_mode(get_irq_regs())); |
150 | #endif | 169 | #endif |
170 | profile_tick(CPU_PROFILING); | ||
151 | 171 | ||
152 | return IRQ_HANDLED; | 172 | return IRQ_HANDLED; |
153 | } | 173 | } |
diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c index bef025b07443..17d8e4172896 100644 --- a/arch/blackfin/kernel/traps.c +++ b/arch/blackfin/kernel/traps.c | |||
@@ -75,16 +75,6 @@ void __init trap_init(void) | |||
75 | CSYNC(); | 75 | CSYNC(); |
76 | } | 76 | } |
77 | 77 | ||
78 | /* | ||
79 | * Used to save the RETX, SEQSTAT, I/D CPLB FAULT ADDR | ||
80 | * values across the transition from exception to IRQ5. | ||
81 | * We put these in L1, so they are going to be in a valid | ||
82 | * location during exception context | ||
83 | */ | ||
84 | __attribute__((l1_data)) | ||
85 | unsigned long saved_retx, saved_seqstat, | ||
86 | saved_icplb_fault_addr, saved_dcplb_fault_addr; | ||
87 | |||
88 | static void decode_address(char *buf, unsigned long address) | 78 | static void decode_address(char *buf, unsigned long address) |
89 | { | 79 | { |
90 | #ifdef CONFIG_DEBUG_VERBOSE | 80 | #ifdef CONFIG_DEBUG_VERBOSE |
@@ -211,18 +201,18 @@ asmlinkage void double_fault_c(struct pt_regs *fp) | |||
211 | printk(KERN_EMERG "\n" KERN_EMERG "Double Fault\n"); | 201 | printk(KERN_EMERG "\n" KERN_EMERG "Double Fault\n"); |
212 | #ifdef CONFIG_DEBUG_DOUBLEFAULT_PRINT | 202 | #ifdef CONFIG_DEBUG_DOUBLEFAULT_PRINT |
213 | if (((long)fp->seqstat & SEQSTAT_EXCAUSE) == VEC_UNCOV) { | 203 | if (((long)fp->seqstat & SEQSTAT_EXCAUSE) == VEC_UNCOV) { |
204 | unsigned int cpu = smp_processor_id(); | ||
214 | char buf[150]; | 205 | char buf[150]; |
215 | decode_address(buf, saved_retx); | 206 | decode_address(buf, cpu_pda[cpu].retx); |
216 | printk(KERN_EMERG "While handling exception (EXCAUSE = 0x%x) at %s:\n", | 207 | printk(KERN_EMERG "While handling exception (EXCAUSE = 0x%x) at %s:\n", |
217 | (int)saved_seqstat & SEQSTAT_EXCAUSE, buf); | 208 | (unsigned int)cpu_pda[cpu].seqstat & SEQSTAT_EXCAUSE, buf); |
218 | decode_address(buf, saved_dcplb_fault_addr); | 209 | decode_address(buf, cpu_pda[cpu].dcplb_fault_addr); |
219 | printk(KERN_NOTICE " DCPLB_FAULT_ADDR: %s\n", buf); | 210 | printk(KERN_NOTICE " DCPLB_FAULT_ADDR: %s\n", buf); |
220 | decode_address(buf, saved_icplb_fault_addr); | 211 | decode_address(buf, cpu_pda[cpu].icplb_fault_addr); |
221 | printk(KERN_NOTICE " ICPLB_FAULT_ADDR: %s\n", buf); | 212 | printk(KERN_NOTICE " ICPLB_FAULT_ADDR: %s\n", buf); |
222 | 213 | ||
223 | decode_address(buf, fp->retx); | 214 | decode_address(buf, fp->retx); |
224 | printk(KERN_NOTICE "The instruction at %s caused a double exception\n", | 215 | printk(KERN_NOTICE "The instruction at %s caused a double exception\n", buf); |
225 | buf); | ||
226 | } else | 216 | } else |
227 | #endif | 217 | #endif |
228 | { | 218 | { |
@@ -240,6 +230,9 @@ asmlinkage void trap_c(struct pt_regs *fp) | |||
240 | #ifdef CONFIG_DEBUG_BFIN_HWTRACE_ON | 230 | #ifdef CONFIG_DEBUG_BFIN_HWTRACE_ON |
241 | int j; | 231 | int j; |
242 | #endif | 232 | #endif |
233 | #ifdef CONFIG_DEBUG_HUNT_FOR_ZERO | ||
234 | unsigned int cpu = smp_processor_id(); | ||
235 | #endif | ||
243 | int sig = 0; | 236 | int sig = 0; |
244 | siginfo_t info; | 237 | siginfo_t info; |
245 | unsigned long trapnr = fp->seqstat & SEQSTAT_EXCAUSE; | 238 | unsigned long trapnr = fp->seqstat & SEQSTAT_EXCAUSE; |
@@ -417,7 +410,7 @@ asmlinkage void trap_c(struct pt_regs *fp) | |||
417 | info.si_code = ILL_CPLB_MULHIT; | 410 | info.si_code = ILL_CPLB_MULHIT; |
418 | sig = SIGSEGV; | 411 | sig = SIGSEGV; |
419 | #ifdef CONFIG_DEBUG_HUNT_FOR_ZERO | 412 | #ifdef CONFIG_DEBUG_HUNT_FOR_ZERO |
420 | if (saved_dcplb_fault_addr < FIXED_CODE_START) | 413 | if (cpu_pda[cpu].dcplb_fault_addr < FIXED_CODE_START) |
421 | verbose_printk(KERN_NOTICE "NULL pointer access\n"); | 414 | verbose_printk(KERN_NOTICE "NULL pointer access\n"); |
422 | else | 415 | else |
423 | #endif | 416 | #endif |
@@ -471,7 +464,7 @@ asmlinkage void trap_c(struct pt_regs *fp) | |||
471 | info.si_code = ILL_CPLB_MULHIT; | 464 | info.si_code = ILL_CPLB_MULHIT; |
472 | sig = SIGSEGV; | 465 | sig = SIGSEGV; |
473 | #ifdef CONFIG_DEBUG_HUNT_FOR_ZERO | 466 | #ifdef CONFIG_DEBUG_HUNT_FOR_ZERO |
474 | if (saved_icplb_fault_addr < FIXED_CODE_START) | 467 | if (cpu_pda[cpu].icplb_fault_addr < FIXED_CODE_START) |
475 | verbose_printk(KERN_NOTICE "Jump to NULL address\n"); | 468 | verbose_printk(KERN_NOTICE "Jump to NULL address\n"); |
476 | else | 469 | else |
477 | #endif | 470 | #endif |
@@ -584,10 +577,15 @@ asmlinkage void trap_c(struct pt_regs *fp) | |||
584 | } | 577 | } |
585 | } | 578 | } |
586 | 579 | ||
587 | info.si_signo = sig; | 580 | #ifdef CONFIG_IPIPE |
588 | info.si_errno = 0; | 581 | if (!ipipe_trap_notify(fp->seqstat & 0x3f, fp)) |
589 | info.si_addr = (void __user *)fp->pc; | 582 | #endif |
590 | force_sig_info(sig, &info, current); | 583 | { |
584 | info.si_signo = sig; | ||
585 | info.si_errno = 0; | ||
586 | info.si_addr = (void __user *)fp->pc; | ||
587 | force_sig_info(sig, &info, current); | ||
588 | } | ||
591 | 589 | ||
592 | trace_buffer_restore(j); | 590 | trace_buffer_restore(j); |
593 | return; | 591 | return; |
@@ -656,13 +654,13 @@ static bool get_instruction(unsigned short *val, unsigned short *address) | |||
656 | return false; | 654 | return false; |
657 | } | 655 | } |
658 | 656 | ||
659 | /* | 657 | /* |
660 | * decode the instruction if we are printing out the trace, as it | 658 | * decode the instruction if we are printing out the trace, as it |
661 | * makes things easier to follow, without running it through objdump | 659 | * makes things easier to follow, without running it through objdump |
662 | * These are the normal instructions which cause change of flow, which | 660 | * These are the normal instructions which cause change of flow, which |
663 | * would be at the source of the trace buffer | 661 | * would be at the source of the trace buffer |
664 | */ | 662 | */ |
665 | #ifdef CONFIG_DEBUG_VERBOSE | 663 | #if defined(CONFIG_DEBUG_VERBOSE) && defined(CONFIG_DEBUG_BFIN_HWTRACE_ON) |
666 | static void decode_instruction(unsigned short *address) | 664 | static void decode_instruction(unsigned short *address) |
667 | { | 665 | { |
668 | unsigned short opcode; | 666 | unsigned short opcode; |
@@ -846,7 +844,7 @@ void show_stack(struct task_struct *task, unsigned long *stack) | |||
846 | } | 844 | } |
847 | if (fp) { | 845 | if (fp) { |
848 | frame = fp; | 846 | frame = fp; |
849 | printk(" FP: (0x%p)\n", fp); | 847 | printk(KERN_NOTICE " FP: (0x%p)\n", fp); |
850 | } else | 848 | } else |
851 | frame = 0; | 849 | frame = 0; |
852 | 850 | ||
@@ -960,6 +958,7 @@ void dump_bfin_process(struct pt_regs *fp) | |||
960 | else | 958 | else |
961 | verbose_printk(KERN_NOTICE "COMM= invalid\n"); | 959 | verbose_printk(KERN_NOTICE "COMM= invalid\n"); |
962 | 960 | ||
961 | printk(KERN_NOTICE "CPU = %d\n", current_thread_info()->cpu); | ||
963 | if (!((unsigned long)current->mm & 0x3) && (unsigned long)current->mm >= FIXED_CODE_START) | 962 | if (!((unsigned long)current->mm & 0x3) && (unsigned long)current->mm >= FIXED_CODE_START) |
964 | verbose_printk(KERN_NOTICE "TEXT = 0x%p-0x%p DATA = 0x%p-0x%p\n" | 963 | verbose_printk(KERN_NOTICE "TEXT = 0x%p-0x%p DATA = 0x%p-0x%p\n" |
965 | KERN_NOTICE " BSS = 0x%p-0x%p USER-STACK = 0x%p\n" | 964 | KERN_NOTICE " BSS = 0x%p-0x%p USER-STACK = 0x%p\n" |
@@ -1053,6 +1052,7 @@ void show_regs(struct pt_regs *fp) | |||
1053 | struct irqaction *action; | 1052 | struct irqaction *action; |
1054 | unsigned int i; | 1053 | unsigned int i; |
1055 | unsigned long flags; | 1054 | unsigned long flags; |
1055 | unsigned int cpu = smp_processor_id(); | ||
1056 | 1056 | ||
1057 | verbose_printk(KERN_NOTICE "\n" KERN_NOTICE "SEQUENCER STATUS:\t\t%s\n", print_tainted()); | 1057 | verbose_printk(KERN_NOTICE "\n" KERN_NOTICE "SEQUENCER STATUS:\t\t%s\n", print_tainted()); |
1058 | verbose_printk(KERN_NOTICE " SEQSTAT: %08lx IPEND: %04lx SYSCFG: %04lx\n", | 1058 | verbose_printk(KERN_NOTICE " SEQSTAT: %08lx IPEND: %04lx SYSCFG: %04lx\n", |
@@ -1112,9 +1112,9 @@ unlock: | |||
1112 | 1112 | ||
1113 | if (((long)fp->seqstat & SEQSTAT_EXCAUSE) && | 1113 | if (((long)fp->seqstat & SEQSTAT_EXCAUSE) && |
1114 | (((long)fp->seqstat & SEQSTAT_EXCAUSE) != VEC_HWERR)) { | 1114 | (((long)fp->seqstat & SEQSTAT_EXCAUSE) != VEC_HWERR)) { |
1115 | decode_address(buf, saved_dcplb_fault_addr); | 1115 | decode_address(buf, cpu_pda[cpu].dcplb_fault_addr); |
1116 | verbose_printk(KERN_NOTICE "DCPLB_FAULT_ADDR: %s\n", buf); | 1116 | verbose_printk(KERN_NOTICE "DCPLB_FAULT_ADDR: %s\n", buf); |
1117 | decode_address(buf, saved_icplb_fault_addr); | 1117 | decode_address(buf, cpu_pda[cpu].icplb_fault_addr); |
1118 | verbose_printk(KERN_NOTICE "ICPLB_FAULT_ADDR: %s\n", buf); | 1118 | verbose_printk(KERN_NOTICE "ICPLB_FAULT_ADDR: %s\n", buf); |
1119 | } | 1119 | } |
1120 | 1120 | ||
@@ -1153,20 +1153,21 @@ unlock: | |||
1153 | asmlinkage int sys_bfin_spinlock(int *spinlock)__attribute__((l1_text)); | 1153 | asmlinkage int sys_bfin_spinlock(int *spinlock)__attribute__((l1_text)); |
1154 | #endif | 1154 | #endif |
1155 | 1155 | ||
1156 | asmlinkage int sys_bfin_spinlock(int *spinlock) | 1156 | static DEFINE_SPINLOCK(bfin_spinlock_lock); |
1157 | |||
1158 | asmlinkage int sys_bfin_spinlock(int *p) | ||
1157 | { | 1159 | { |
1158 | int ret = 0; | 1160 | int ret, tmp = 0; |
1159 | int tmp = 0; | ||
1160 | 1161 | ||
1161 | local_irq_disable(); | 1162 | spin_lock(&bfin_spinlock_lock); /* This would also hold kernel preemption. */ |
1162 | ret = get_user(tmp, spinlock); | 1163 | ret = get_user(tmp, p); |
1163 | if (ret == 0) { | 1164 | if (likely(ret == 0)) { |
1164 | if (tmp) | 1165 | if (unlikely(tmp)) |
1165 | ret = 1; | 1166 | ret = 1; |
1166 | tmp = 1; | 1167 | else |
1167 | put_user(tmp, spinlock); | 1168 | put_user(1, p); |
1168 | } | 1169 | } |
1169 | local_irq_enable(); | 1170 | spin_unlock(&bfin_spinlock_lock); |
1170 | return ret; | 1171 | return ret; |
1171 | } | 1172 | } |
1172 | 1173 | ||
diff --git a/arch/blackfin/kernel/vmlinux.lds.S b/arch/blackfin/kernel/vmlinux.lds.S index 7d12c6692a65..4b4341da0585 100644 --- a/arch/blackfin/kernel/vmlinux.lds.S +++ b/arch/blackfin/kernel/vmlinux.lds.S | |||
@@ -68,6 +68,8 @@ SECTIONS | |||
68 | __etext = .; | 68 | __etext = .; |
69 | } | 69 | } |
70 | 70 | ||
71 | NOTES | ||
72 | |||
71 | /* Just in case the first read only is a 32-bit access */ | 73 | /* Just in case the first read only is a 32-bit access */ |
72 | RO_DATA(4) | 74 | RO_DATA(4) |
73 | 75 | ||
@@ -109,7 +111,6 @@ SECTIONS | |||
109 | #endif | 111 | #endif |
110 | 112 | ||
111 | DATA_DATA | 113 | DATA_DATA |
112 | *(.data.*) | ||
113 | CONSTRUCTORS | 114 | CONSTRUCTORS |
114 | 115 | ||
115 | /* make sure the init_task is aligned to the | 116 | /* make sure the init_task is aligned to the |
@@ -161,12 +162,14 @@ SECTIONS | |||
161 | *(.con_initcall.init) | 162 | *(.con_initcall.init) |
162 | ___con_initcall_end = .; | 163 | ___con_initcall_end = .; |
163 | } | 164 | } |
165 | PERCPU(4) | ||
164 | SECURITY_INIT | 166 | SECURITY_INIT |
165 | .init.ramfs : | 167 | .init.ramfs : |
166 | { | 168 | { |
167 | . = ALIGN(4); | 169 | . = ALIGN(4); |
168 | ___initramfs_start = .; | 170 | ___initramfs_start = .; |
169 | *(.init.ramfs) | 171 | *(.init.ramfs) |
172 | . = ALIGN(4); | ||
170 | ___initramfs_end = .; | 173 | ___initramfs_end = .; |
171 | } | 174 | } |
172 | 175 | ||
@@ -212,7 +215,7 @@ SECTIONS | |||
212 | __ebss_b_l1 = .; | 215 | __ebss_b_l1 = .; |
213 | } | 216 | } |
214 | 217 | ||
215 | __l2_lma_start = .; | 218 | __l2_lma_start = LOADADDR(.data_b_l1) + SIZEOF(.data_b_l1); |
216 | 219 | ||
217 | .text_data_l2 L2_START : AT(LOADADDR(.data_b_l1) + SIZEOF(.data_b_l1)) | 220 | .text_data_l2 L2_START : AT(LOADADDR(.data_b_l1) + SIZEOF(.data_b_l1)) |
218 | { | 221 | { |
@@ -240,7 +243,7 @@ SECTIONS | |||
240 | /* Force trailing alignment of our init section so that when we | 243 | /* Force trailing alignment of our init section so that when we |
241 | * free our init memory, we don't leave behind a partial page. | 244 | * free our init memory, we don't leave behind a partial page. |
242 | */ | 245 | */ |
243 | . = LOADADDR(.data_b_l1) + SIZEOF(.data_b_l1); | 246 | . = LOADADDR(.text_data_l2) + SIZEOF(.text_data_l2); |
244 | . = ALIGN(PAGE_SIZE); | 247 | . = ALIGN(PAGE_SIZE); |
245 | ___init_end = .; | 248 | ___init_end = .; |
246 | 249 | ||