1 files changed, 219 insertions, 0 deletions

diff --git a/arch/blackfin/kernel/time-ts.c b/arch/blackfin/kernel/time-ts.c
new file mode 100644
index 000000000000..4482c47c09e5
--- /dev/null
+++ b/arch/blackfin/kernel/time-ts.c
@@ -0,0 +1,219 @@
+/*
+ * linux/arch/kernel/time-ts.c
+ *
+ * Based on arm clockevents implementation and old bfin time tick.
+ *
+ * Copyright(C) 2008, GeoTechnologies, Vitja Makarov
+ *
+ * This code is licenced under the GPL version 2. For details see
+ * kernel-base/COPYING.
+ */
+#include <linux/module.h>
+#include <linux/profile.h>
+#include <linux/interrupt.h>
+#include <linux/time.h>
+#include <linux/timex.h>
+#include <linux/irq.h>
+#include <linux/clocksource.h>
+#include <linux/clockchips.h>
+#include <linux/cpufreq.h>
+
+#include <asm/blackfin.h>
+#include <asm/time.h>
+
+#ifdef CONFIG_CYCLES_CLOCKSOURCE
+
+/* Accelerators for sched_clock()
+ * convert from cycles(64bits) => nanoseconds (64bits)
+ *  basic equation:
+ *              ns = cycles / (freq / ns_per_sec)
+ *              ns = cycles * (ns_per_sec / freq)
+ *              ns = cycles * (10^9 / (cpu_khz * 10^3))
+ *              ns = cycles * (10^6 / cpu_khz)
+ *
+ *      Then we use scaling math (suggested by george@mvista.com) to get:
+ *              ns = cycles * (10^6 * SC / cpu_khz) / SC
+ *              ns = cycles * cyc2ns_scale / SC
+ *
+ *      And since SC is a constant power of two, we can convert the div
+ *  into a shift.
+ *
+ *  We can use khz divisor instead of mhz to keep a better precision, since
+ *  cyc2ns_scale is limited to 10^6 * 2^10, which fits in 32 bits.
+ *  (mathieu.desnoyers@polymtl.ca)
+ *
+ *                      -johnstul@us.ibm.com "math is hard, lets go shopping!"
+ */
+
+static unsigned long cyc2ns_scale;
+#define CYC2NS_SCALE_FACTOR 10 /* 2^10, carefully chosen */
+
+static inline void set_cyc2ns_scale(unsigned long cpu_khz)
+{
+        cyc2ns_scale = (1000000 << CYC2NS_SCALE_FACTOR) / cpu_khz;
+}
+
+static inline unsigned long long cycles_2_ns(cycle_t cyc)
+{
+        return (cyc * cyc2ns_scale) >> CYC2NS_SCALE_FACTOR;
+}
+
+static cycle_t read_cycles(void)
+{
+        return get_cycles();
+}
+
+unsigned long long sched_clock(void)
+{
+        return cycles_2_ns(read_cycles());
+}
+
+static struct clocksource clocksource_bfin = {
+        .name           = "bfin_cycles",
+        .rating         = 350,
+        .read           = read_cycles,
+        .mask           = CLOCKSOURCE_MASK(64),
+        .shift          = 22,
+        .flags          = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static int __init bfin_clocksource_init(void)
+{
+        set_cyc2ns_scale(get_cclk() / 1000);
+
+        clocksource_bfin.mult = clocksource_hz2mult(get_cclk(), clocksource_bfin.shift);
+
+        if (clocksource_register(&clocksource_bfin))
+                panic("failed to register clocksource");
+
+        return 0;
+}
+
+#else
+# define bfin_clocksource_init()
+#endif
+
+static int bfin_timer_set_next_event(unsigned long cycles,
+                                     struct clock_event_device *evt)
+{
+        bfin_write_TCOUNT(cycles);
+        CSYNC();
+        return 0;
+}
+
+static void bfin_timer_set_mode(enum clock_event_mode mode,
+                                struct clock_event_device *evt)
+{
+        switch (mode) {
+        case CLOCK_EVT_MODE_PERIODIC: {
+                unsigned long tcount = ((get_cclk() / (HZ * TIME_SCALE)) - 1);
+                bfin_write_TCNTL(TMPWR);
+                bfin_write_TSCALE(TIME_SCALE - 1);
+                CSYNC();
+                bfin_write_TPERIOD(tcount);
+                bfin_write_TCOUNT(tcount);
+                bfin_write_TCNTL(TMPWR | TMREN | TAUTORLD);
+                CSYNC();
+                break;
+        }
+        case CLOCK_EVT_MODE_ONESHOT:
+                bfin_write_TSCALE(0);
+                bfin_write_TCOUNT(0);
+                bfin_write_TCNTL(TMPWR | TMREN);
+                CSYNC();
+                break;
+        case CLOCK_EVT_MODE_UNUSED:
+        case CLOCK_EVT_MODE_SHUTDOWN:
+                bfin_write_TCNTL(0);
+                CSYNC();
+                break;
+        case CLOCK_EVT_MODE_RESUME:
+                break;
+        }
+}
+
+static void __init bfin_timer_init(void)
+{
+        /* power up the timer, but don't enable it just yet */
+        bfin_write_TCNTL(TMPWR);
+        CSYNC();
+
+        /*
+         * the TSCALE prescaler counter.
+         */
+        bfin_write_TSCALE(TIME_SCALE - 1);
+        bfin_write_TPERIOD(0);
+        bfin_write_TCOUNT(0);
+
+        /* now enable the timer */
+        CSYNC();
+}
+
+/*
+ * timer_interrupt() needs to keep up the real-time clock,
+ * as well as call the "do_timer()" routine every clocktick
+ */
+#ifdef CONFIG_CORE_TIMER_IRQ_L1
+__attribute__((l1_text))
+#endif
+irqreturn_t timer_interrupt(int irq, void *dev_id);
+
+static struct clock_event_device clockevent_bfin = {
+        .name           = "bfin_core_timer",
+        .features       = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+        .shift          = 32,
+        .cpumask        = CPU_MASK_CPU0,
+        .set_next_event = bfin_timer_set_next_event,
+        .set_mode       = bfin_timer_set_mode,
+};
+
+static struct irqaction bfin_timer_irq = {
+        .name           = "Blackfin Core Timer",
+        .flags          = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+        .handler        = timer_interrupt,
+        .dev_id         = &clockevent_bfin,
+};
+
+irqreturn_t timer_interrupt(int irq, void *dev_id)
+{
+        struct clock_event_device *evt = dev_id;
+        evt->event_handler(evt);
+        return IRQ_HANDLED;
+}
+
+static int __init bfin_clockevent_init(void)
+{
+        setup_irq(IRQ_CORETMR, &bfin_timer_irq);
+        bfin_timer_init();
+
+        clockevent_bfin.mult = div_sc(get_cclk(), NSEC_PER_SEC, clockevent_bfin.shift);
+        clockevent_bfin.max_delta_ns = clockevent_delta2ns(-1, &clockevent_bfin);
+        clockevent_bfin.min_delta_ns = clockevent_delta2ns(100, &clockevent_bfin);
+        clockevents_register_device(&clockevent_bfin);
+
+        return 0;
+}
+
+void __init time_init(void)
+{
+        time_t secs_since_1970 = (365 * 37 + 9) * 24 * 60 * 60; /* 1 Jan 2007 */
+
+#ifdef CONFIG_RTC_DRV_BFIN
+        /* [#2663] hack to filter junk RTC values that would cause
+         * userspace to have to deal with time values greater than
+         * 2^31 seconds (which uClibc cannot cope with yet)
+         */
+        if ((bfin_read_RTC_STAT() & 0xC0000000) == 0xC0000000) {
+                printk(KERN_NOTICE "bfin-rtc: invalid date; resetting\n");
+                bfin_write_RTC_STAT(0);
+        }
+#endif
+
+        /* Initialize xtime. From now on, xtime is updated with timer interrupts */
+        xtime.tv_sec = secs_since_1970;
+        xtime.tv_nsec = 0;
+        set_normalized_timespec(&wall_to_monotonic, -xtime.tv_sec, -xtime.tv_nsec);
+
+        bfin_clocksource_init();
+        bfin_clockevent_init();
+}