diff options
Diffstat (limited to 'arch/avr32')
-rw-r--r-- | arch/avr32/Kconfig | 19 | ||||
-rw-r--r-- | arch/avr32/Makefile | 1 | ||||
-rw-r--r-- | arch/avr32/boards/atstk1000/atstk1002.c | 18 | ||||
-rw-r--r-- | arch/avr32/boards/atstk1000/atstk1003.c | 18 | ||||
-rw-r--r-- | arch/avr32/boards/favr-32/setup.c | 20 | ||||
-rw-r--r-- | arch/avr32/boards/hammerhead/Kconfig | 43 | ||||
-rw-r--r-- | arch/avr32/boards/hammerhead/Makefile | 1 | ||||
-rw-r--r-- | arch/avr32/boards/hammerhead/flash.c | 377 | ||||
-rw-r--r-- | arch/avr32/boards/hammerhead/flash.h | 6 | ||||
-rw-r--r-- | arch/avr32/boards/hammerhead/setup.c | 236 | ||||
-rw-r--r-- | arch/avr32/boards/mimc200/setup.c | 2 | ||||
-rw-r--r-- | arch/avr32/configs/hammerhead_defconfig | 1467 | ||||
-rw-r--r-- | arch/avr32/kernel/process.c | 1 | ||||
-rw-r--r-- | arch/avr32/kernel/signal.c | 1 | ||||
-rw-r--r-- | arch/avr32/kernel/sys_avr32.c | 1 | ||||
-rw-r--r-- | arch/avr32/mach-at32ap/at32ap700x.c | 4 | ||||
-rw-r--r-- | arch/avr32/mach-at32ap/clock.c | 4 | ||||
-rw-r--r-- | arch/avr32/mach-at32ap/clock.h | 3 | ||||
-rw-r--r-- | arch/avr32/mach-at32ap/include/mach/at32ap700x.h | 3 | ||||
-rw-r--r-- | arch/avr32/mach-at32ap/include/mach/portmux.h | 2 | ||||
-rw-r--r-- | arch/avr32/mach-at32ap/pio.c | 19 | ||||
-rw-r--r-- | arch/avr32/mm/cache.c | 1 |
22 files changed, 2181 insertions, 66 deletions
diff --git a/arch/avr32/Kconfig b/arch/avr32/Kconfig index 26eca87f6735..b189680d18b0 100644 --- a/arch/avr32/Kconfig +++ b/arch/avr32/Kconfig | |||
@@ -122,6 +122,24 @@ config BOARD_ATNGW100 | |||
122 | bool "ATNGW100 Network Gateway" | 122 | bool "ATNGW100 Network Gateway" |
123 | select CPU_AT32AP7000 | 123 | select CPU_AT32AP7000 |
124 | 124 | ||
125 | config BOARD_HAMMERHEAD | ||
126 | bool "Hammerhead board" | ||
127 | select CPU_AT32AP7000 | ||
128 | select USB_ARCH_HAS_HCD | ||
129 | help | ||
130 | The Hammerhead platform is built around a AVR32 32-bit microcontroller from Atmel. | ||
131 | It offers versatile peripherals, such as ethernet, usb device, usb host etc. | ||
132 | |||
133 | The board also incooperates a power supply and is a Power over Ethernet (PoE) Powered | ||
134 | Device (PD). | ||
135 | |||
136 | Additonally, a Cyclone III FPGA from Altera is integrated on the board. The FPGA is | ||
137 | mapped into the 32-bit AVR memory bus. The FPGA offers two DDR2 SDRAM interfaces, which | ||
138 | will cover even the most exceptional need of memory bandwidth. Together with the onboard | ||
139 | video decoder the board is ready for video processing. | ||
140 | |||
141 | For more information see: http://www.miromico.com/hammerhead | ||
142 | |||
125 | config BOARD_FAVR_32 | 143 | config BOARD_FAVR_32 |
126 | bool "Favr-32 LCD-board" | 144 | bool "Favr-32 LCD-board" |
127 | select CPU_AT32AP7000 | 145 | select CPU_AT32AP7000 |
@@ -133,6 +151,7 @@ endchoice | |||
133 | 151 | ||
134 | source "arch/avr32/boards/atstk1000/Kconfig" | 152 | source "arch/avr32/boards/atstk1000/Kconfig" |
135 | source "arch/avr32/boards/atngw100/Kconfig" | 153 | source "arch/avr32/boards/atngw100/Kconfig" |
154 | source "arch/avr32/boards/hammerhead/Kconfig" | ||
136 | source "arch/avr32/boards/favr-32/Kconfig" | 155 | source "arch/avr32/boards/favr-32/Kconfig" |
137 | 156 | ||
138 | choice | 157 | choice |
diff --git a/arch/avr32/Makefile b/arch/avr32/Makefile index b088e103e753..f3ef3bbf797c 100644 --- a/arch/avr32/Makefile +++ b/arch/avr32/Makefile | |||
@@ -33,6 +33,7 @@ head-y += arch/avr32/kernel/head.o | |||
33 | core-y += $(machdirs) | 33 | core-y += $(machdirs) |
34 | core-$(CONFIG_BOARD_ATSTK1000) += arch/avr32/boards/atstk1000/ | 34 | core-$(CONFIG_BOARD_ATSTK1000) += arch/avr32/boards/atstk1000/ |
35 | core-$(CONFIG_BOARD_ATNGW100) += arch/avr32/boards/atngw100/ | 35 | core-$(CONFIG_BOARD_ATNGW100) += arch/avr32/boards/atngw100/ |
36 | core-$(CONFIG_BOARD_HAMMERHEAD) += arch/avr32/boards/hammerhead/ | ||
36 | core-$(CONFIG_BOARD_FAVR_32) += arch/avr32/boards/favr-32/ | 37 | core-$(CONFIG_BOARD_FAVR_32) += arch/avr32/boards/favr-32/ |
37 | core-$(CONFIG_BOARD_MIMC200) += arch/avr32/boards/mimc200/ | 38 | core-$(CONFIG_BOARD_MIMC200) += arch/avr32/boards/mimc200/ |
38 | core-$(CONFIG_LOADER_U_BOOT) += arch/avr32/boot/u-boot/ | 39 | core-$(CONFIG_LOADER_U_BOOT) += arch/avr32/boot/u-boot/ |
diff --git a/arch/avr32/boards/atstk1000/atstk1002.c b/arch/avr32/boards/atstk1000/atstk1002.c index 6d94f74bc5c7..1f33a106905c 100644 --- a/arch/avr32/boards/atstk1000/atstk1002.c +++ b/arch/avr32/boards/atstk1000/atstk1002.c | |||
@@ -287,23 +287,7 @@ static int __init atstk1002_init(void) | |||
287 | * ATSTK1000 uses 32-bit SDRAM interface. Reserve the | 287 | * ATSTK1000 uses 32-bit SDRAM interface. Reserve the |
288 | * SDRAM-specific pins so that nobody messes with them. | 288 | * SDRAM-specific pins so that nobody messes with them. |
289 | */ | 289 | */ |
290 | at32_reserve_pin(GPIO_PIN_PE(0)); /* DATA[16] */ | 290 | at32_reserve_pin(GPIO_PIOE_BASE, ATMEL_EBI_PE_DATA_ALL); |
291 | at32_reserve_pin(GPIO_PIN_PE(1)); /* DATA[17] */ | ||
292 | at32_reserve_pin(GPIO_PIN_PE(2)); /* DATA[18] */ | ||
293 | at32_reserve_pin(GPIO_PIN_PE(3)); /* DATA[19] */ | ||
294 | at32_reserve_pin(GPIO_PIN_PE(4)); /* DATA[20] */ | ||
295 | at32_reserve_pin(GPIO_PIN_PE(5)); /* DATA[21] */ | ||
296 | at32_reserve_pin(GPIO_PIN_PE(6)); /* DATA[22] */ | ||
297 | at32_reserve_pin(GPIO_PIN_PE(7)); /* DATA[23] */ | ||
298 | at32_reserve_pin(GPIO_PIN_PE(8)); /* DATA[24] */ | ||
299 | at32_reserve_pin(GPIO_PIN_PE(9)); /* DATA[25] */ | ||
300 | at32_reserve_pin(GPIO_PIN_PE(10)); /* DATA[26] */ | ||
301 | at32_reserve_pin(GPIO_PIN_PE(11)); /* DATA[27] */ | ||
302 | at32_reserve_pin(GPIO_PIN_PE(12)); /* DATA[28] */ | ||
303 | at32_reserve_pin(GPIO_PIN_PE(13)); /* DATA[29] */ | ||
304 | at32_reserve_pin(GPIO_PIN_PE(14)); /* DATA[30] */ | ||
305 | at32_reserve_pin(GPIO_PIN_PE(15)); /* DATA[31] */ | ||
306 | at32_reserve_pin(GPIO_PIN_PE(26)); /* SDCS */ | ||
307 | 291 | ||
308 | #ifdef CONFIG_BOARD_ATSTK1006 | 292 | #ifdef CONFIG_BOARD_ATSTK1006 |
309 | smc_set_timing(&nand_config, &nand_timing); | 293 | smc_set_timing(&nand_config, &nand_timing); |
diff --git a/arch/avr32/boards/atstk1000/atstk1003.c b/arch/avr32/boards/atstk1000/atstk1003.c index db2038cd2e5b..b3a23c88bcfe 100644 --- a/arch/avr32/boards/atstk1000/atstk1003.c +++ b/arch/avr32/boards/atstk1000/atstk1003.c | |||
@@ -131,23 +131,7 @@ static int __init atstk1003_init(void) | |||
131 | * ATSTK1000 uses 32-bit SDRAM interface. Reserve the | 131 | * ATSTK1000 uses 32-bit SDRAM interface. Reserve the |
132 | * SDRAM-specific pins so that nobody messes with them. | 132 | * SDRAM-specific pins so that nobody messes with them. |
133 | */ | 133 | */ |
134 | at32_reserve_pin(GPIO_PIN_PE(0)); /* DATA[16] */ | 134 | at32_reserve_pin(GPIO_PIOE_BASE, ATMEL_EBI_PE_DATA_ALL); |
135 | at32_reserve_pin(GPIO_PIN_PE(1)); /* DATA[17] */ | ||
136 | at32_reserve_pin(GPIO_PIN_PE(2)); /* DATA[18] */ | ||
137 | at32_reserve_pin(GPIO_PIN_PE(3)); /* DATA[19] */ | ||
138 | at32_reserve_pin(GPIO_PIN_PE(4)); /* DATA[20] */ | ||
139 | at32_reserve_pin(GPIO_PIN_PE(5)); /* DATA[21] */ | ||
140 | at32_reserve_pin(GPIO_PIN_PE(6)); /* DATA[22] */ | ||
141 | at32_reserve_pin(GPIO_PIN_PE(7)); /* DATA[23] */ | ||
142 | at32_reserve_pin(GPIO_PIN_PE(8)); /* DATA[24] */ | ||
143 | at32_reserve_pin(GPIO_PIN_PE(9)); /* DATA[25] */ | ||
144 | at32_reserve_pin(GPIO_PIN_PE(10)); /* DATA[26] */ | ||
145 | at32_reserve_pin(GPIO_PIN_PE(11)); /* DATA[27] */ | ||
146 | at32_reserve_pin(GPIO_PIN_PE(12)); /* DATA[28] */ | ||
147 | at32_reserve_pin(GPIO_PIN_PE(13)); /* DATA[29] */ | ||
148 | at32_reserve_pin(GPIO_PIN_PE(14)); /* DATA[30] */ | ||
149 | at32_reserve_pin(GPIO_PIN_PE(15)); /* DATA[31] */ | ||
150 | at32_reserve_pin(GPIO_PIN_PE(26)); /* SDCS */ | ||
151 | 135 | ||
152 | #ifdef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM | 136 | #ifdef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM |
153 | at32_add_device_usart(1); | 137 | at32_add_device_usart(1); |
diff --git a/arch/avr32/boards/favr-32/setup.c b/arch/avr32/boards/favr-32/setup.c index 1ee4faf0742d..1a12930df8e7 100644 --- a/arch/avr32/boards/favr-32/setup.c +++ b/arch/avr32/boards/favr-32/setup.c | |||
@@ -307,28 +307,10 @@ static int __init favr32_init(void) | |||
307 | * Favr-32 uses 32-bit SDRAM interface. Reserve the SDRAM-specific | 307 | * Favr-32 uses 32-bit SDRAM interface. Reserve the SDRAM-specific |
308 | * pins so that nobody messes with them. | 308 | * pins so that nobody messes with them. |
309 | */ | 309 | */ |
310 | at32_reserve_pin(GPIO_PIN_PE(0)); /* DATA[16] */ | 310 | at32_reserve_pin(GPIO_PIOE_BASE, ATMEL_EBI_PE_DATA_ALL); |
311 | at32_reserve_pin(GPIO_PIN_PE(1)); /* DATA[17] */ | ||
312 | at32_reserve_pin(GPIO_PIN_PE(2)); /* DATA[18] */ | ||
313 | at32_reserve_pin(GPIO_PIN_PE(3)); /* DATA[19] */ | ||
314 | at32_reserve_pin(GPIO_PIN_PE(4)); /* DATA[20] */ | ||
315 | at32_reserve_pin(GPIO_PIN_PE(5)); /* DATA[21] */ | ||
316 | at32_reserve_pin(GPIO_PIN_PE(6)); /* DATA[22] */ | ||
317 | at32_reserve_pin(GPIO_PIN_PE(7)); /* DATA[23] */ | ||
318 | at32_reserve_pin(GPIO_PIN_PE(8)); /* DATA[24] */ | ||
319 | at32_reserve_pin(GPIO_PIN_PE(9)); /* DATA[25] */ | ||
320 | at32_reserve_pin(GPIO_PIN_PE(10)); /* DATA[26] */ | ||
321 | at32_reserve_pin(GPIO_PIN_PE(11)); /* DATA[27] */ | ||
322 | at32_reserve_pin(GPIO_PIN_PE(12)); /* DATA[28] */ | ||
323 | at32_reserve_pin(GPIO_PIN_PE(13)); /* DATA[29] */ | ||
324 | at32_reserve_pin(GPIO_PIN_PE(14)); /* DATA[30] */ | ||
325 | at32_reserve_pin(GPIO_PIN_PE(15)); /* DATA[31] */ | ||
326 | at32_reserve_pin(GPIO_PIN_PE(26)); /* SDCS */ | ||
327 | 311 | ||
328 | at32_select_gpio(GPIO_PIN_PB(3), 0); /* IRQ from ADS7843 */ | 312 | at32_select_gpio(GPIO_PIN_PB(3), 0); /* IRQ from ADS7843 */ |
329 | 313 | ||
330 | at32_add_system_devices(); | ||
331 | |||
332 | at32_add_device_usart(0); | 314 | at32_add_device_usart(0); |
333 | 315 | ||
334 | set_hw_addr(at32_add_device_eth(0, ð_data[0])); | 316 | set_hw_addr(at32_add_device_eth(0, ð_data[0])); |
diff --git a/arch/avr32/boards/hammerhead/Kconfig b/arch/avr32/boards/hammerhead/Kconfig new file mode 100644 index 000000000000..fda2331f9789 --- /dev/null +++ b/arch/avr32/boards/hammerhead/Kconfig | |||
@@ -0,0 +1,43 @@ | |||
1 | # Hammerhead customization | ||
2 | |||
3 | if BOARD_HAMMERHEAD | ||
4 | |||
5 | config BOARD_HAMMERHEAD_USB | ||
6 | bool "Philips ISP116x-hcd USB support" | ||
7 | help | ||
8 | This enables USB support for Hammerheads internal ISP116x | ||
9 | controller from Philips. | ||
10 | |||
11 | Choose 'Y' here if you want to have your board USB driven. | ||
12 | |||
13 | config BOARD_HAMMERHEAD_LCD | ||
14 | bool "Atmel AT91/AT32 LCD support" | ||
15 | help | ||
16 | This enables LCD support for the Hammerhead board. You may | ||
17 | also add support for framebuffer devices (AT91/AT32 LCD Controller) | ||
18 | and framebuffer console support to get the most out of your LCD. | ||
19 | |||
20 | Choose 'Y' here if you have ordered a Corona daugther board and | ||
21 | want to have support for your Hantronix HDA-351T-LV LCD. | ||
22 | |||
23 | config BOARD_HAMMERHEAD_SND | ||
24 | bool "Atmel AC97 Sound support" | ||
25 | help | ||
26 | This enables Sound support for the Hammerhead board. You may | ||
27 | also go trough the ALSA settings to get it working. | ||
28 | |||
29 | Choose 'Y' here if you have ordered a Corona daugther board and | ||
30 | want to make your board funky. | ||
31 | |||
32 | config BOARD_HAMMERHEAD_FPGA | ||
33 | bool "Hammerhead FPGA Support" | ||
34 | default y | ||
35 | help | ||
36 | This adds support for the Cyclone III FPGA from Altera | ||
37 | found on Miromico's Hammerhead board. | ||
38 | |||
39 | Choose 'Y' here if you want to have FPGA support enabled. | ||
40 | You will have to choose the "Hammerhead FPGA Device Support" in | ||
41 | Device Drivers->Misc to be able to use FPGA functionality. | ||
42 | |||
43 | endif # BOARD_ATNGW100 | ||
diff --git a/arch/avr32/boards/hammerhead/Makefile b/arch/avr32/boards/hammerhead/Makefile new file mode 100644 index 000000000000..c740aa116755 --- /dev/null +++ b/arch/avr32/boards/hammerhead/Makefile | |||
@@ -0,0 +1 @@ | |||
obj-y += setup.o flash.o | |||
diff --git a/arch/avr32/boards/hammerhead/flash.c b/arch/avr32/boards/hammerhead/flash.c new file mode 100644 index 000000000000..a98c6dd3a028 --- /dev/null +++ b/arch/avr32/boards/hammerhead/flash.c | |||
@@ -0,0 +1,377 @@ | |||
1 | /* | ||
2 | * Hammerhead board-specific flash initialization | ||
3 | * | ||
4 | * Copyright (C) 2008 Miromico AG | ||
5 | * | ||
6 | * This program is free software; you can redistribute it and/or modify | ||
7 | * it under the terms of the GNU General Public License version 2 as | ||
8 | * published by the Free Software Foundation. | ||
9 | */ | ||
10 | |||
11 | #include <linux/init.h> | ||
12 | #include <linux/platform_device.h> | ||
13 | #include <linux/mtd/mtd.h> | ||
14 | #include <linux/mtd/partitions.h> | ||
15 | #include <linux/mtd/physmap.h> | ||
16 | #include <linux/usb/isp116x.h> | ||
17 | #include <linux/dma-mapping.h> | ||
18 | #include <linux/platform_device.h> | ||
19 | #include <linux/delay.h> | ||
20 | |||
21 | #include <mach/portmux.h> | ||
22 | #include <mach/at32ap700x.h> | ||
23 | #include <mach/smc.h> | ||
24 | |||
25 | #include "../../mach-at32ap/clock.h" | ||
26 | #include "flash.h" | ||
27 | |||
28 | |||
29 | #define HAMMERHEAD_USB_PERIPH_GCLK0 0x40000000 | ||
30 | #define HAMMERHEAD_USB_PERIPH_CS2 0x02000000 | ||
31 | #define HAMMERHEAD_USB_PERIPH_EXTINT0 0x02000000 | ||
32 | |||
33 | #define HAMMERHEAD_FPGA_PERIPH_MOSI 0x00000002 | ||
34 | #define HAMMERHEAD_FPGA_PERIPH_SCK 0x00000020 | ||
35 | #define HAMMERHEAD_FPGA_PERIPH_EXTINT3 0x10000000 | ||
36 | |||
37 | static struct smc_timing flash_timing __initdata = { | ||
38 | .ncs_read_setup = 0, | ||
39 | .nrd_setup = 40, | ||
40 | .ncs_write_setup = 0, | ||
41 | .nwe_setup = 10, | ||
42 | |||
43 | .ncs_read_pulse = 80, | ||
44 | .nrd_pulse = 40, | ||
45 | .ncs_write_pulse = 65, | ||
46 | .nwe_pulse = 55, | ||
47 | |||
48 | .read_cycle = 120, | ||
49 | .write_cycle = 120, | ||
50 | }; | ||
51 | |||
52 | static struct smc_config flash_config __initdata = { | ||
53 | .bus_width = 2, | ||
54 | .nrd_controlled = 1, | ||
55 | .nwe_controlled = 1, | ||
56 | .byte_write = 1, | ||
57 | }; | ||
58 | |||
59 | static struct mtd_partition flash_parts[] = { | ||
60 | { | ||
61 | .name = "u-boot", | ||
62 | .offset = 0x00000000, | ||
63 | .size = 0x00020000, /* 128 KiB */ | ||
64 | .mask_flags = MTD_WRITEABLE, | ||
65 | }, | ||
66 | { | ||
67 | .name = "root", | ||
68 | .offset = 0x00020000, | ||
69 | .size = 0x007d0000, | ||
70 | }, | ||
71 | { | ||
72 | .name = "env", | ||
73 | .offset = 0x007f0000, | ||
74 | .size = 0x00010000, | ||
75 | .mask_flags = MTD_WRITEABLE, | ||
76 | }, | ||
77 | }; | ||
78 | |||
79 | static struct physmap_flash_data flash_data = { | ||
80 | .width = 2, | ||
81 | .nr_parts = ARRAY_SIZE(flash_parts), | ||
82 | .parts = flash_parts, | ||
83 | }; | ||
84 | |||
85 | static struct resource flash_resource = { | ||
86 | .start = 0x00000000, | ||
87 | .end = 0x007fffff, | ||
88 | .flags = IORESOURCE_MEM, | ||
89 | }; | ||
90 | |||
91 | static struct platform_device flash_device = { | ||
92 | .name = "physmap-flash", | ||
93 | .id = 0, | ||
94 | .resource = &flash_resource, | ||
95 | .num_resources = 1, | ||
96 | .dev = { .platform_data = &flash_data, }, | ||
97 | }; | ||
98 | |||
99 | #ifdef CONFIG_BOARD_HAMMERHEAD_USB | ||
100 | |||
101 | static struct smc_timing isp1160_timing __initdata = { | ||
102 | .ncs_read_setup = 75, | ||
103 | .nrd_setup = 75, | ||
104 | .ncs_write_setup = 75, | ||
105 | .nwe_setup = 75, | ||
106 | |||
107 | |||
108 | /* We use conservative timing settings, as the minimal settings aren't | ||
109 | stable. There may be room for tweaking. */ | ||
110 | .ncs_read_pulse = 75, /* min. 33ns */ | ||
111 | .nrd_pulse = 75, /* min. 33ns */ | ||
112 | .ncs_write_pulse = 75, /* min. 26ns */ | ||
113 | .nwe_pulse = 75, /* min. 26ns */ | ||
114 | |||
115 | .read_cycle = 225, /* min. 143ns */ | ||
116 | .write_cycle = 225, /* min. 136ns */ | ||
117 | }; | ||
118 | |||
119 | static struct smc_config isp1160_config __initdata = { | ||
120 | .bus_width = 2, | ||
121 | .nrd_controlled = 1, | ||
122 | .nwe_controlled = 1, | ||
123 | .byte_write = 0, | ||
124 | }; | ||
125 | |||
126 | /* | ||
127 | * The platform delay function is only used to enforce the strange | ||
128 | * read to write delay. This can not be configured in the SMC. All other | ||
129 | * timings are controlled by the SMC (see timings obove) | ||
130 | * So in isp116x-hcd.c we should comment out USE_PLATFORM_DELAY | ||
131 | */ | ||
132 | void isp116x_delay(struct device *dev, int delay) | ||
133 | { | ||
134 | if (delay > 150) | ||
135 | ndelay(delay - 150); | ||
136 | } | ||
137 | |||
138 | static struct isp116x_platform_data isp1160_data = { | ||
139 | .sel15Kres = 1, /* use internal downstream resistors */ | ||
140 | .oc_enable = 0, /* external overcurrent detection */ | ||
141 | .int_edge_triggered = 0, /* interrupt is level triggered */ | ||
142 | .int_act_high = 0, /* interrupt is active low */ | ||
143 | .delay = isp116x_delay, /* platform delay function */ | ||
144 | }; | ||
145 | |||
146 | static struct resource isp1160_resource[] = { | ||
147 | { | ||
148 | .start = 0x08000000, | ||
149 | .end = 0x08000001, | ||
150 | .flags = IORESOURCE_MEM, | ||
151 | }, | ||
152 | { | ||
153 | .start = 0x08000002, | ||
154 | .end = 0x08000003, | ||
155 | .flags = IORESOURCE_MEM, | ||
156 | }, | ||
157 | { | ||
158 | .start = 64, | ||
159 | .flags = IORESOURCE_IRQ, | ||
160 | }, | ||
161 | }; | ||
162 | |||
163 | static struct platform_device isp1160_device = { | ||
164 | .name = "isp116x-hcd", | ||
165 | .id = 0, | ||
166 | .resource = isp1160_resource, | ||
167 | .num_resources = 3, | ||
168 | .dev = { | ||
169 | .platform_data = &isp1160_data, | ||
170 | }, | ||
171 | }; | ||
172 | #endif | ||
173 | |||
174 | #ifdef CONFIG_BOARD_HAMMERHEAD_USB | ||
175 | static int __init hammerhead_usbh_init(void) | ||
176 | { | ||
177 | struct clk *gclk; | ||
178 | struct clk *osc; | ||
179 | |||
180 | int ret; | ||
181 | |||
182 | /* setup smc for usbh */ | ||
183 | smc_set_timing(&isp1160_config, &isp1160_timing); | ||
184 | ret = smc_set_configuration(2, &isp1160_config); | ||
185 | |||
186 | if (ret < 0) { | ||
187 | printk(KERN_ERR | ||
188 | "hammerhead: failed to set ISP1160 USBH timing\n"); | ||
189 | return ret; | ||
190 | } | ||
191 | |||
192 | /* setup gclk0 to run from osc1 */ | ||
193 | gclk = clk_get(NULL, "gclk0"); | ||
194 | if (IS_ERR(gclk)) | ||
195 | goto err_gclk; | ||
196 | |||
197 | osc = clk_get(NULL, "osc1"); | ||
198 | if (IS_ERR(osc)) | ||
199 | goto err_osc; | ||
200 | |||
201 | if (clk_set_parent(gclk, osc)) { | ||
202 | pr_debug("hammerhead: failed to set osc1 for USBH clock\n"); | ||
203 | goto err_set_clk; | ||
204 | } | ||
205 | |||
206 | /* set clock to 6MHz */ | ||
207 | clk_set_rate(gclk, 6000000); | ||
208 | |||
209 | /* and enable */ | ||
210 | clk_enable(gclk); | ||
211 | |||
212 | /* select GCLK0 peripheral function */ | ||
213 | at32_select_periph(GPIO_PIOA_BASE, HAMMERHEAD_USB_PERIPH_GCLK0, | ||
214 | GPIO_PERIPH_A, 0); | ||
215 | |||
216 | /* enable CS2 peripheral function */ | ||
217 | at32_select_periph(GPIO_PIOE_BASE, HAMMERHEAD_USB_PERIPH_CS2, | ||
218 | GPIO_PERIPH_A, 0); | ||
219 | |||
220 | /* H_WAKEUP must be driven low */ | ||
221 | at32_select_gpio(GPIO_PIN_PA(8), AT32_GPIOF_OUTPUT); | ||
222 | |||
223 | /* Select EXTINT0 for PB25 */ | ||
224 | at32_select_periph(GPIO_PIOB_BASE, HAMMERHEAD_USB_PERIPH_EXTINT0, | ||
225 | GPIO_PERIPH_A, 0); | ||
226 | |||
227 | /* register usbh device driver */ | ||
228 | platform_device_register(&isp1160_device); | ||
229 | |||
230 | err_set_clk: | ||
231 | clk_put(osc); | ||
232 | err_osc: | ||
233 | clk_put(gclk); | ||
234 | err_gclk: | ||
235 | return ret; | ||
236 | } | ||
237 | #endif | ||
238 | |||
239 | #ifdef CONFIG_BOARD_HAMMERHEAD_FPGA | ||
240 | static struct smc_timing fpga_timing __initdata = { | ||
241 | .ncs_read_setup = 16, | ||
242 | .nrd_setup = 32, | ||
243 | .ncs_read_pulse = 48, | ||
244 | .nrd_pulse = 32, | ||
245 | .read_cycle = 64, | ||
246 | |||
247 | .ncs_write_setup = 16, | ||
248 | .nwe_setup = 16, | ||
249 | .ncs_write_pulse = 32, | ||
250 | .nwe_pulse = 32, | ||
251 | .write_cycle = 64, | ||
252 | }; | ||
253 | |||
254 | static struct smc_config fpga_config __initdata = { | ||
255 | .bus_width = 4, | ||
256 | .nrd_controlled = 1, | ||
257 | .nwe_controlled = 1, | ||
258 | .byte_write = 0, | ||
259 | }; | ||
260 | |||
261 | static struct resource hh_fpga0_resource[] = { | ||
262 | { | ||
263 | .start = 0xffe00400, | ||
264 | .end = 0xffe00400 + 0x3ff, | ||
265 | .flags = IORESOURCE_MEM, | ||
266 | }, | ||
267 | { | ||
268 | .start = 4, | ||
269 | .end = 4, | ||
270 | .flags = IORESOURCE_IRQ, | ||
271 | }, | ||
272 | { | ||
273 | .start = 0x0c000000, | ||
274 | .end = 0x0c000100, | ||
275 | .flags = IORESOURCE_MEM, | ||
276 | }, | ||
277 | { | ||
278 | .start = 67, | ||
279 | .end = 67, | ||
280 | .flags = IORESOURCE_IRQ, | ||
281 | }, | ||
282 | }; | ||
283 | |||
284 | static u64 hh_fpga0_dma_mask = DMA_32BIT_MASK; | ||
285 | static struct platform_device hh_fpga0_device = { | ||
286 | .name = "hh_fpga", | ||
287 | .id = 0, | ||
288 | .dev = { | ||
289 | .dma_mask = &hh_fpga0_dma_mask, | ||
290 | .coherent_dma_mask = DMA_32BIT_MASK, | ||
291 | }, | ||
292 | .resource = hh_fpga0_resource, | ||
293 | .num_resources = ARRAY_SIZE(hh_fpga0_resource), | ||
294 | }; | ||
295 | |||
296 | static struct clk hh_fpga0_spi_clk = { | ||
297 | .name = "spi_clk", | ||
298 | .dev = &hh_fpga0_device.dev, | ||
299 | .mode = pba_clk_mode, | ||
300 | .get_rate = pba_clk_get_rate, | ||
301 | .index = 1, | ||
302 | }; | ||
303 | |||
304 | struct platform_device *__init at32_add_device_hh_fpga(void) | ||
305 | { | ||
306 | /* Select peripheral functionallity for SPI SCK and MOSI */ | ||
307 | at32_select_periph(GPIO_PIOB_BASE, HAMMERHEAD_FPGA_PERIPH_SCK, | ||
308 | GPIO_PERIPH_B, 0); | ||
309 | at32_select_periph(GPIO_PIOB_BASE, HAMMERHEAD_FPGA_PERIPH_MOSI, | ||
310 | GPIO_PERIPH_B, 0); | ||
311 | |||
312 | /* reserve all other needed gpio | ||
313 | * We have on board pull ups, so there is no need | ||
314 | * to enable gpio pull ups */ | ||
315 | /* INIT_DONE (input) */ | ||
316 | at32_select_gpio(GPIO_PIN_PB(0), 0); | ||
317 | |||
318 | /* nSTATUS (input) */ | ||
319 | at32_select_gpio(GPIO_PIN_PB(2), 0); | ||
320 | |||
321 | /* nCONFIG (output, low) */ | ||
322 | at32_select_gpio(GPIO_PIN_PB(3), AT32_GPIOF_OUTPUT); | ||
323 | |||
324 | /* CONF_DONE (input) */ | ||
325 | at32_select_gpio(GPIO_PIN_PB(4), 0); | ||
326 | |||
327 | /* Select EXTINT3 for PB28 (Interrupt from FPGA) */ | ||
328 | at32_select_periph(GPIO_PIOB_BASE, HAMMERHEAD_FPGA_PERIPH_EXTINT3, | ||
329 | GPIO_PERIPH_A, 0); | ||
330 | |||
331 | /* Get our parent clock */ | ||
332 | hh_fpga0_spi_clk.parent = clk_get(NULL, "pba"); | ||
333 | clk_put(hh_fpga0_spi_clk.parent); | ||
334 | |||
335 | /* Register clock in at32 clock tree */ | ||
336 | at32_clk_register(&hh_fpga0_spi_clk); | ||
337 | |||
338 | platform_device_register(&hh_fpga0_device); | ||
339 | return &hh_fpga0_device; | ||
340 | } | ||
341 | #endif | ||
342 | |||
343 | /* This needs to be called after the SMC has been initialized */ | ||
344 | static int __init hammerhead_flash_init(void) | ||
345 | { | ||
346 | int ret; | ||
347 | |||
348 | smc_set_timing(&flash_config, &flash_timing); | ||
349 | ret = smc_set_configuration(0, &flash_config); | ||
350 | |||
351 | if (ret < 0) { | ||
352 | printk(KERN_ERR "hammerhead: failed to set NOR flash timing\n"); | ||
353 | return ret; | ||
354 | } | ||
355 | |||
356 | platform_device_register(&flash_device); | ||
357 | |||
358 | #ifdef CONFIG_BOARD_HAMMERHEAD_USB | ||
359 | hammerhead_usbh_init(); | ||
360 | #endif | ||
361 | |||
362 | #ifdef CONFIG_BOARD_HAMMERHEAD_FPGA | ||
363 | /* Setup SMC for FPGA interface */ | ||
364 | smc_set_timing(&fpga_config, &fpga_timing); | ||
365 | ret = smc_set_configuration(3, &fpga_config); | ||
366 | #endif | ||
367 | |||
368 | |||
369 | if (ret < 0) { | ||
370 | printk(KERN_ERR "hammerhead: failed to set FPGA timing\n"); | ||
371 | return ret; | ||
372 | } | ||
373 | |||
374 | return 0; | ||
375 | } | ||
376 | |||
377 | device_initcall(hammerhead_flash_init); | ||
diff --git a/arch/avr32/boards/hammerhead/flash.h b/arch/avr32/boards/hammerhead/flash.h new file mode 100644 index 000000000000..ea70c626587b --- /dev/null +++ b/arch/avr32/boards/hammerhead/flash.h | |||
@@ -0,0 +1,6 @@ | |||
1 | #ifndef __BOARDS_HAMMERHEAD_FLASH_H | ||
2 | #define __BOARDS_HAMMERHEAD_FLASH_H | ||
3 | |||
4 | struct platform_device *at32_add_device_hh_fpga(void); | ||
5 | |||
6 | #endif /* __BOARDS_HAMMERHEAD_FLASH_H */ | ||
diff --git a/arch/avr32/boards/hammerhead/setup.c b/arch/avr32/boards/hammerhead/setup.c new file mode 100644 index 000000000000..af45c26c5ff9 --- /dev/null +++ b/arch/avr32/boards/hammerhead/setup.c | |||
@@ -0,0 +1,236 @@ | |||
1 | /* | ||
2 | * Board-specific setup code for the Miromico Hammerhead board | ||
3 | * | ||
4 | * Copyright (C) 2008 Miromico AG | ||
5 | * | ||
6 | * This program is free software; you can redistribute it and/or modify | ||
7 | * it under the terms of the GNU General Public License version 2 as | ||
8 | * published by the Free Software Foundation. | ||
9 | */ | ||
10 | #include <linux/clk.h> | ||
11 | #include <linux/fb.h> | ||
12 | #include <linux/etherdevice.h> | ||
13 | #include <linux/i2c.h> | ||
14 | #include <linux/i2c-gpio.h> | ||
15 | #include <linux/init.h> | ||
16 | #include <linux/linkage.h> | ||
17 | #include <linux/platform_device.h> | ||
18 | #include <linux/types.h> | ||
19 | #include <linux/spi/spi.h> | ||
20 | |||
21 | #include <video/atmel_lcdc.h> | ||
22 | |||
23 | #include <linux/io.h> | ||
24 | #include <asm/setup.h> | ||
25 | |||
26 | #include <mach/at32ap700x.h> | ||
27 | #include <mach/board.h> | ||
28 | #include <mach/init.h> | ||
29 | #include <mach/portmux.h> | ||
30 | |||
31 | #include "../../mach-at32ap/clock.h" | ||
32 | #include "flash.h" | ||
33 | |||
34 | /* Oscillator frequencies. These are board-specific */ | ||
35 | unsigned long at32_board_osc_rates[3] = { | ||
36 | [0] = 32768, /* 32.768 kHz on RTC osc */ | ||
37 | [1] = 25000000, /* 25MHz on osc0 */ | ||
38 | [2] = 12000000, /* 12 MHz on osc1 */ | ||
39 | }; | ||
40 | |||
41 | /* Initialized by bootloader-specific startup code. */ | ||
42 | struct tag *bootloader_tags __initdata; | ||
43 | |||
44 | #ifdef CONFIG_BOARD_HAMMERHEAD_LCD | ||
45 | static struct fb_videomode __initdata hda350tlv_modes[] = { | ||
46 | { | ||
47 | .name = "320x240 @ 75", | ||
48 | .refresh = 75, | ||
49 | .xres = 320, | ||
50 | .yres = 240, | ||
51 | .pixclock = KHZ2PICOS(6891), | ||
52 | |||
53 | .left_margin = 48, | ||
54 | .right_margin = 18, | ||
55 | .upper_margin = 18, | ||
56 | .lower_margin = 4, | ||
57 | .hsync_len = 20, | ||
58 | .vsync_len = 2, | ||
59 | |||
60 | .sync = 0, | ||
61 | .vmode = FB_VMODE_NONINTERLACED, | ||
62 | }, | ||
63 | }; | ||
64 | |||
65 | static struct fb_monspecs __initdata hammerhead_hda350t_monspecs = { | ||
66 | .manufacturer = "HAN", | ||
67 | .monitor = "HDA350T-LV", | ||
68 | .modedb = hda350tlv_modes, | ||
69 | .modedb_len = ARRAY_SIZE(hda350tlv_modes), | ||
70 | .hfmin = 14900, | ||
71 | .hfmax = 22350, | ||
72 | .vfmin = 60, | ||
73 | .vfmax = 90, | ||
74 | .dclkmax = 10000000, | ||
75 | }; | ||
76 | |||
77 | struct atmel_lcdfb_info __initdata hammerhead_lcdc_data = { | ||
78 | .default_bpp = 24, | ||
79 | .default_dmacon = ATMEL_LCDC_DMAEN | ATMEL_LCDC_DMA2DEN, | ||
80 | .default_lcdcon2 = (ATMEL_LCDC_DISTYPE_TFT | ||
81 | | ATMEL_LCDC_INVCLK | ||
82 | | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE | ||
83 | | ATMEL_LCDC_MEMOR_BIG), | ||
84 | .default_monspecs = &hammerhead_hda350t_monspecs, | ||
85 | .guard_time = 2, | ||
86 | }; | ||
87 | #endif | ||
88 | |||
89 | struct eth_addr { | ||
90 | u8 addr[6]; | ||
91 | }; | ||
92 | |||
93 | static struct eth_addr __initdata hw_addr[1]; | ||
94 | static struct eth_platform_data __initdata eth_data[1]; | ||
95 | |||
96 | /* | ||
97 | * The next two functions should go away as the boot loader is | ||
98 | * supposed to initialize the macb address registers with a valid | ||
99 | * ethernet address. But we need to keep it around for a while until | ||
100 | * we can be reasonably sure the boot loader does this. | ||
101 | * | ||
102 | * The phy_id is ignored as the driver will probe for it. | ||
103 | */ | ||
104 | static int __init parse_tag_ethernet(struct tag *tag) | ||
105 | { | ||
106 | int i = tag->u.ethernet.mac_index; | ||
107 | |||
108 | if (i < ARRAY_SIZE(hw_addr)) | ||
109 | memcpy(hw_addr[i].addr, tag->u.ethernet.hw_address, | ||
110 | sizeof(hw_addr[i].addr)); | ||
111 | |||
112 | return 0; | ||
113 | } | ||
114 | __tagtable(ATAG_ETHERNET, parse_tag_ethernet); | ||
115 | |||
116 | static void __init set_hw_addr(struct platform_device *pdev) | ||
117 | { | ||
118 | struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0); | ||
119 | const u8 *addr; | ||
120 | void __iomem *regs; | ||
121 | struct clk *pclk; | ||
122 | |||
123 | if (!res) | ||
124 | return; | ||
125 | |||
126 | if (pdev->id >= ARRAY_SIZE(hw_addr)) | ||
127 | return; | ||
128 | |||
129 | addr = hw_addr[pdev->id].addr; | ||
130 | |||
131 | if (!is_valid_ether_addr(addr)) | ||
132 | return; | ||
133 | |||
134 | /* | ||
135 | * Since this is board-specific code, we'll cheat and use the | ||
136 | * physical address directly as we happen to know that it's | ||
137 | * the same as the virtual address. | ||
138 | */ | ||
139 | regs = (void __iomem __force *)res->start; | ||
140 | pclk = clk_get(&pdev->dev, "pclk"); | ||
141 | |||
142 | if (!pclk) | ||
143 | return; | ||
144 | |||
145 | clk_enable(pclk); | ||
146 | |||
147 | __raw_writel((addr[3] << 24) | (addr[2] << 16) | (addr[1] << 8) | | ||
148 | addr[0], regs + 0x98); | ||
149 | __raw_writel((addr[5] << 8) | addr[4], regs + 0x9c); | ||
150 | |||
151 | clk_disable(pclk); | ||
152 | clk_put(pclk); | ||
153 | } | ||
154 | |||
155 | void __init setup_board(void) | ||
156 | { | ||
157 | at32_map_usart(1, 0); /* USART 1: /dev/ttyS0, DB9 */ | ||
158 | at32_setup_serial_console(0); | ||
159 | } | ||
160 | |||
161 | static struct i2c_gpio_platform_data i2c_gpio_data = { | ||
162 | .sda_pin = GPIO_PIN_PA(6), | ||
163 | .scl_pin = GPIO_PIN_PA(7), | ||
164 | .sda_is_open_drain = 1, | ||
165 | .scl_is_open_drain = 1, | ||
166 | .udelay = 2, /* close to 100 kHz */ | ||
167 | }; | ||
168 | |||
169 | static struct platform_device i2c_gpio_device = { | ||
170 | .name = "i2c-gpio", | ||
171 | .id = 0, | ||
172 | .dev = { .platform_data = &i2c_gpio_data, }, | ||
173 | }; | ||
174 | |||
175 | static struct i2c_board_info __initdata i2c_info[] = {}; | ||
176 | |||
177 | #ifdef CONFIG_BOARD_HAMMERHEAD_SND | ||
178 | static struct ac97c_platform_data ac97c_data = { | ||
179 | .reset_pin = GPIO_PIN_PA(16), | ||
180 | }; | ||
181 | #endif | ||
182 | |||
183 | static int __init hammerhead_init(void) | ||
184 | { | ||
185 | /* | ||
186 | * Hammerhead uses 32-bit SDRAM interface. Reserve the | ||
187 | * SDRAM-specific pins so that nobody messes with them. | ||
188 | */ | ||
189 | at32_reserve_pin(GPIO_PIOE_BASE, ATMEL_EBI_PE_DATA_ALL); | ||
190 | |||
191 | at32_add_device_usart(0); | ||
192 | |||
193 | /* Reserve PB29 (GCLK3). This pin is used as clock source | ||
194 | * for ETH PHY (25MHz). GCLK3 setup is done by U-Boot. | ||
195 | */ | ||
196 | at32_reserve_pin(GPIO_PIOB_BASE, (1<<29)); | ||
197 | |||
198 | /* | ||
199 | * Hammerhead uses only one ethernet port, so we don't set | ||
200 | * address of second port | ||
201 | */ | ||
202 | set_hw_addr(at32_add_device_eth(0, ð_data[0])); | ||
203 | |||
204 | #ifdef CONFIG_BOARD_HAMMERHEAD_FPGA | ||
205 | at32_add_device_hh_fpga(); | ||
206 | #endif | ||
207 | at32_add_device_mci(0, NULL); | ||
208 | |||
209 | #ifdef CONFIG_BOARD_HAMMERHEAD_USB | ||
210 | at32_add_device_usba(0, NULL); | ||
211 | #endif | ||
212 | #ifdef CONFIG_BOARD_HAMMERHEAD_LCD | ||
213 | at32_add_device_lcdc(0, &hammerhead_lcdc_data, fbmem_start, | ||
214 | fbmem_size, ATMEL_LCDC_PRI_24BIT); | ||
215 | #endif | ||
216 | |||
217 | at32_select_gpio(i2c_gpio_data.sda_pin, | ||
218 | AT32_GPIOF_MULTIDRV | AT32_GPIOF_OUTPUT | | ||
219 | AT32_GPIOF_HIGH); | ||
220 | at32_select_gpio(i2c_gpio_data.scl_pin, | ||
221 | AT32_GPIOF_MULTIDRV | AT32_GPIOF_OUTPUT | | ||
222 | AT32_GPIOF_HIGH); | ||
223 | platform_device_register(&i2c_gpio_device); | ||
224 | i2c_register_board_info(0, i2c_info, ARRAY_SIZE(i2c_info)); | ||
225 | |||
226 | #ifdef CONFIG_BOARD_HAMMERHEAD_SND | ||
227 | at32_add_device_ac97c(0, &ac97c_data); | ||
228 | #endif | ||
229 | |||
230 | /* Select the Touchscreen interrupt pin mode */ | ||
231 | at32_select_periph(GPIO_PIOB_BASE, 0x08000000, GPIO_PERIPH_A, 0); | ||
232 | |||
233 | return 0; | ||
234 | } | ||
235 | |||
236 | postcore_initcall(hammerhead_init); | ||
diff --git a/arch/avr32/boards/mimc200/setup.c b/arch/avr32/boards/mimc200/setup.c index 811d73027f77..2b58d61f0afc 100644 --- a/arch/avr32/boards/mimc200/setup.c +++ b/arch/avr32/boards/mimc200/setup.c | |||
@@ -207,8 +207,6 @@ static int __init mimc200_init(void) | |||
207 | * reserve any pins for it. | 207 | * reserve any pins for it. |
208 | */ | 208 | */ |
209 | 209 | ||
210 | at32_add_system_devices(); | ||
211 | |||
212 | at32_add_device_usart(0); | 210 | at32_add_device_usart(0); |
213 | at32_add_device_usart(1); | 211 | at32_add_device_usart(1); |
214 | at32_add_device_usart(2); | 212 | at32_add_device_usart(2); |
diff --git a/arch/avr32/configs/hammerhead_defconfig b/arch/avr32/configs/hammerhead_defconfig new file mode 100644 index 000000000000..0d3d2982c8f5 --- /dev/null +++ b/arch/avr32/configs/hammerhead_defconfig | |||
@@ -0,0 +1,1467 @@ | |||
1 | # | ||
2 | # Automatically generated make config: don't edit | ||
3 | # Linux kernel version: 2.6.27 | ||
4 | # Tue Dec 9 15:37:30 2008 | ||
5 | # | ||
6 | CONFIG_AVR32=y | ||
7 | CONFIG_GENERIC_GPIO=y | ||
8 | CONFIG_GENERIC_HARDIRQS=y | ||
9 | CONFIG_STACKTRACE_SUPPORT=y | ||
10 | CONFIG_LOCKDEP_SUPPORT=y | ||
11 | CONFIG_TRACE_IRQFLAGS_SUPPORT=y | ||
12 | CONFIG_HARDIRQS_SW_RESEND=y | ||
13 | CONFIG_GENERIC_IRQ_PROBE=y | ||
14 | CONFIG_RWSEM_GENERIC_SPINLOCK=y | ||
15 | CONFIG_GENERIC_TIME=y | ||
16 | CONFIG_GENERIC_CLOCKEVENTS=y | ||
17 | # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set | ||
18 | # CONFIG_ARCH_HAS_ILOG2_U32 is not set | ||
19 | # CONFIG_ARCH_HAS_ILOG2_U64 is not set | ||
20 | CONFIG_GENERIC_HWEIGHT=y | ||
21 | CONFIG_GENERIC_CALIBRATE_DELAY=y | ||
22 | CONFIG_GENERIC_BUG=y | ||
23 | CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" | ||
24 | |||
25 | # | ||
26 | # General setup | ||
27 | # | ||
28 | CONFIG_EXPERIMENTAL=y | ||
29 | CONFIG_BROKEN_ON_SMP=y | ||
30 | CONFIG_INIT_ENV_ARG_LIMIT=32 | ||
31 | CONFIG_LOCALVERSION="" | ||
32 | # CONFIG_LOCALVERSION_AUTO is not set | ||
33 | CONFIG_SWAP=y | ||
34 | CONFIG_SYSVIPC=y | ||
35 | CONFIG_SYSVIPC_SYSCTL=y | ||
36 | CONFIG_POSIX_MQUEUE=y | ||
37 | CONFIG_BSD_PROCESS_ACCT=y | ||
38 | CONFIG_BSD_PROCESS_ACCT_V3=y | ||
39 | # CONFIG_TASKSTATS is not set | ||
40 | # CONFIG_AUDIT is not set | ||
41 | # CONFIG_IKCONFIG is not set | ||
42 | CONFIG_LOG_BUF_SHIFT=14 | ||
43 | # CONFIG_CGROUPS is not set | ||
44 | # CONFIG_GROUP_SCHED is not set | ||
45 | CONFIG_SYSFS_DEPRECATED=y | ||
46 | CONFIG_SYSFS_DEPRECATED_V2=y | ||
47 | # CONFIG_RELAY is not set | ||
48 | # CONFIG_NAMESPACES is not set | ||
49 | CONFIG_BLK_DEV_INITRD=y | ||
50 | CONFIG_INITRAMFS_SOURCE="" | ||
51 | CONFIG_CC_OPTIMIZE_FOR_SIZE=y | ||
52 | CONFIG_SYSCTL=y | ||
53 | CONFIG_EMBEDDED=y | ||
54 | # CONFIG_SYSCTL_SYSCALL is not set | ||
55 | CONFIG_KALLSYMS=y | ||
56 | # CONFIG_KALLSYMS_ALL is not set | ||
57 | # CONFIG_KALLSYMS_EXTRA_PASS is not set | ||
58 | CONFIG_HOTPLUG=y | ||
59 | CONFIG_PRINTK=y | ||
60 | CONFIG_BUG=y | ||
61 | CONFIG_ELF_CORE=y | ||
62 | # CONFIG_COMPAT_BRK is not set | ||
63 | # CONFIG_BASE_FULL is not set | ||
64 | CONFIG_FUTEX=y | ||
65 | CONFIG_ANON_INODES=y | ||
66 | CONFIG_EPOLL=y | ||
67 | CONFIG_SIGNALFD=y | ||
68 | CONFIG_TIMERFD=y | ||
69 | CONFIG_EVENTFD=y | ||
70 | CONFIG_SHMEM=y | ||
71 | CONFIG_AIO=y | ||
72 | CONFIG_VM_EVENT_COUNTERS=y | ||
73 | CONFIG_PCI_QUIRKS=y | ||
74 | CONFIG_SLUB_DEBUG=y | ||
75 | # CONFIG_SLAB is not set | ||
76 | CONFIG_SLUB=y | ||
77 | # CONFIG_SLOB is not set | ||
78 | CONFIG_PROFILING=y | ||
79 | # CONFIG_MARKERS is not set | ||
80 | CONFIG_OPROFILE=m | ||
81 | CONFIG_HAVE_OPROFILE=y | ||
82 | CONFIG_KPROBES=y | ||
83 | CONFIG_HAVE_KPROBES=y | ||
84 | CONFIG_HAVE_CLK=y | ||
85 | # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set | ||
86 | CONFIG_SLABINFO=y | ||
87 | CONFIG_RT_MUTEXES=y | ||
88 | # CONFIG_TINY_SHMEM is not set | ||
89 | CONFIG_BASE_SMALL=1 | ||
90 | CONFIG_MODULES=y | ||
91 | # CONFIG_MODULE_FORCE_LOAD is not set | ||
92 | CONFIG_MODULE_UNLOAD=y | ||
93 | CONFIG_MODULE_FORCE_UNLOAD=y | ||
94 | # CONFIG_MODVERSIONS is not set | ||
95 | # CONFIG_MODULE_SRCVERSION_ALL is not set | ||
96 | CONFIG_KMOD=y | ||
97 | CONFIG_BLOCK=y | ||
98 | # CONFIG_LBD is not set | ||
99 | # CONFIG_BLK_DEV_IO_TRACE is not set | ||
100 | # CONFIG_LSF is not set | ||
101 | # CONFIG_BLK_DEV_BSG is not set | ||
102 | # CONFIG_BLK_DEV_INTEGRITY is not set | ||
103 | |||
104 | # | ||
105 | # IO Schedulers | ||
106 | # | ||
107 | CONFIG_IOSCHED_NOOP=y | ||
108 | # CONFIG_IOSCHED_AS is not set | ||
109 | # CONFIG_IOSCHED_DEADLINE is not set | ||
110 | CONFIG_IOSCHED_CFQ=y | ||
111 | # CONFIG_DEFAULT_AS is not set | ||
112 | # CONFIG_DEFAULT_DEADLINE is not set | ||
113 | CONFIG_DEFAULT_CFQ=y | ||
114 | # CONFIG_DEFAULT_NOOP is not set | ||
115 | CONFIG_DEFAULT_IOSCHED="cfq" | ||
116 | CONFIG_CLASSIC_RCU=y | ||
117 | # CONFIG_FREEZER is not set | ||
118 | |||
119 | # | ||
120 | # System Type and features | ||
121 | # | ||
122 | CONFIG_TICK_ONESHOT=y | ||
123 | CONFIG_NO_HZ=y | ||
124 | CONFIG_HIGH_RES_TIMERS=y | ||
125 | CONFIG_GENERIC_CLOCKEVENTS_BUILD=y | ||
126 | CONFIG_SUBARCH_AVR32B=y | ||
127 | CONFIG_MMU=y | ||
128 | CONFIG_PERFORMANCE_COUNTERS=y | ||
129 | CONFIG_PLATFORM_AT32AP=y | ||
130 | CONFIG_CPU_AT32AP700X=y | ||
131 | CONFIG_CPU_AT32AP7000=y | ||
132 | # CONFIG_BOARD_ATSTK1000 is not set | ||
133 | # CONFIG_BOARD_ATNGW100 is not set | ||
134 | CONFIG_BOARD_HAMMERHEAD=y | ||
135 | # CONFIG_BOARD_FAVR_32 is not set | ||
136 | # CONFIG_BOARD_MIMC200 is not set | ||
137 | CONFIG_BOARD_HAMMERHEAD_USB=y | ||
138 | CONFIG_BOARD_HAMMERHEAD_LCD=y | ||
139 | CONFIG_BOARD_HAMMERHEAD_SND=y | ||
140 | # CONFIG_BOARD_HAMMERHEAD_FPGA is not set | ||
141 | CONFIG_LOADER_U_BOOT=y | ||
142 | |||
143 | # | ||
144 | # Atmel AVR32 AP options | ||
145 | # | ||
146 | # CONFIG_AP700X_32_BIT_SMC is not set | ||
147 | CONFIG_AP700X_16_BIT_SMC=y | ||
148 | # CONFIG_AP700X_8_BIT_SMC is not set | ||
149 | CONFIG_LOAD_ADDRESS=0x10000000 | ||
150 | CONFIG_ENTRY_ADDRESS=0x90000000 | ||
151 | CONFIG_PHYS_OFFSET=0x10000000 | ||
152 | CONFIG_PREEMPT_NONE=y | ||
153 | # CONFIG_PREEMPT_VOLUNTARY is not set | ||
154 | # CONFIG_PREEMPT is not set | ||
155 | CONFIG_QUICKLIST=y | ||
156 | # CONFIG_HAVE_ARCH_BOOTMEM_NODE is not set | ||
157 | # CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set | ||
158 | # CONFIG_NEED_NODE_MEMMAP_SIZE is not set | ||
159 | CONFIG_ARCH_FLATMEM_ENABLE=y | ||
160 | # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set | ||
161 | # CONFIG_ARCH_SPARSEMEM_ENABLE is not set | ||
162 | CONFIG_SELECT_MEMORY_MODEL=y | ||
163 | CONFIG_FLATMEM_MANUAL=y | ||
164 | # CONFIG_DISCONTIGMEM_MANUAL is not set | ||
165 | # CONFIG_SPARSEMEM_MANUAL is not set | ||
166 | CONFIG_FLATMEM=y | ||
167 | CONFIG_FLAT_NODE_MEM_MAP=y | ||
168 | CONFIG_PAGEFLAGS_EXTENDED=y | ||
169 | CONFIG_SPLIT_PTLOCK_CPUS=4 | ||
170 | # CONFIG_RESOURCES_64BIT is not set | ||
171 | # CONFIG_PHYS_ADDR_T_64BIT is not set | ||
172 | CONFIG_ZONE_DMA_FLAG=0 | ||
173 | CONFIG_NR_QUICK=2 | ||
174 | CONFIG_VIRT_TO_BUS=y | ||
175 | CONFIG_UNEVICTABLE_LRU=y | ||
176 | # CONFIG_OWNERSHIP_TRACE is not set | ||
177 | # CONFIG_NMI_DEBUGGING is not set | ||
178 | # CONFIG_HZ_100 is not set | ||
179 | CONFIG_HZ_250=y | ||
180 | # CONFIG_HZ_300 is not set | ||
181 | # CONFIG_HZ_1000 is not set | ||
182 | CONFIG_HZ=250 | ||
183 | CONFIG_SCHED_HRTICK=y | ||
184 | CONFIG_CMDLINE="" | ||
185 | |||
186 | # | ||
187 | # Power management options | ||
188 | # | ||
189 | # CONFIG_PM is not set | ||
190 | CONFIG_ARCH_SUSPEND_POSSIBLE=y | ||
191 | |||
192 | # | ||
193 | # CPU Frequency scaling | ||
194 | # | ||
195 | CONFIG_CPU_FREQ=y | ||
196 | CONFIG_CPU_FREQ_TABLE=y | ||
197 | # CONFIG_CPU_FREQ_DEBUG is not set | ||
198 | # CONFIG_CPU_FREQ_STAT is not set | ||
199 | # CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set | ||
200 | # CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set | ||
201 | # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set | ||
202 | CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y | ||
203 | # CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set | ||
204 | CONFIG_CPU_FREQ_GOV_PERFORMANCE=y | ||
205 | # CONFIG_CPU_FREQ_GOV_POWERSAVE is not set | ||
206 | CONFIG_CPU_FREQ_GOV_USERSPACE=y | ||
207 | CONFIG_CPU_FREQ_GOV_ONDEMAND=y | ||
208 | # CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set | ||
209 | CONFIG_CPU_FREQ_AT32AP=y | ||
210 | |||
211 | # | ||
212 | # Bus options | ||
213 | # | ||
214 | # CONFIG_ARCH_SUPPORTS_MSI is not set | ||
215 | # CONFIG_PCCARD is not set | ||
216 | |||
217 | # | ||
218 | # Executable file formats | ||
219 | # | ||
220 | CONFIG_BINFMT_ELF=y | ||
221 | # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set | ||
222 | # CONFIG_HAVE_AOUT is not set | ||
223 | # CONFIG_BINFMT_MISC is not set | ||
224 | CONFIG_NET=y | ||
225 | |||
226 | # | ||
227 | # Networking options | ||
228 | # | ||
229 | CONFIG_PACKET=y | ||
230 | CONFIG_PACKET_MMAP=y | ||
231 | CONFIG_UNIX=y | ||
232 | CONFIG_XFRM=y | ||
233 | CONFIG_XFRM_USER=y | ||
234 | # CONFIG_XFRM_SUB_POLICY is not set | ||
235 | # CONFIG_XFRM_MIGRATE is not set | ||
236 | # CONFIG_XFRM_STATISTICS is not set | ||
237 | CONFIG_XFRM_IPCOMP=y | ||
238 | CONFIG_NET_KEY=y | ||
239 | # CONFIG_NET_KEY_MIGRATE is not set | ||
240 | CONFIG_INET=y | ||
241 | CONFIG_IP_MULTICAST=y | ||
242 | CONFIG_IP_ADVANCED_ROUTER=y | ||
243 | CONFIG_ASK_IP_FIB_HASH=y | ||
244 | # CONFIG_IP_FIB_TRIE is not set | ||
245 | CONFIG_IP_FIB_HASH=y | ||
246 | # CONFIG_IP_MULTIPLE_TABLES is not set | ||
247 | # CONFIG_IP_ROUTE_MULTIPATH is not set | ||
248 | # CONFIG_IP_ROUTE_VERBOSE is not set | ||
249 | CONFIG_IP_PNP=y | ||
250 | CONFIG_IP_PNP_DHCP=y | ||
251 | # CONFIG_IP_PNP_BOOTP is not set | ||
252 | # CONFIG_IP_PNP_RARP is not set | ||
253 | # CONFIG_NET_IPIP is not set | ||
254 | # CONFIG_NET_IPGRE is not set | ||
255 | CONFIG_IP_MROUTE=y | ||
256 | CONFIG_IP_PIMSM_V1=y | ||
257 | # CONFIG_IP_PIMSM_V2 is not set | ||
258 | # CONFIG_ARPD is not set | ||
259 | CONFIG_SYN_COOKIES=y | ||
260 | CONFIG_INET_AH=y | ||
261 | CONFIG_INET_ESP=y | ||
262 | CONFIG_INET_IPCOMP=y | ||
263 | CONFIG_INET_XFRM_TUNNEL=y | ||
264 | CONFIG_INET_TUNNEL=y | ||
265 | CONFIG_INET_XFRM_MODE_TRANSPORT=y | ||
266 | CONFIG_INET_XFRM_MODE_TUNNEL=y | ||
267 | CONFIG_INET_XFRM_MODE_BEET=y | ||
268 | # CONFIG_INET_LRO is not set | ||
269 | CONFIG_INET_DIAG=y | ||
270 | CONFIG_INET_TCP_DIAG=y | ||
271 | # CONFIG_TCP_CONG_ADVANCED is not set | ||
272 | CONFIG_TCP_CONG_CUBIC=y | ||
273 | CONFIG_DEFAULT_TCP_CONG="cubic" | ||
274 | # CONFIG_TCP_MD5SIG is not set | ||
275 | # CONFIG_IPV6 is not set | ||
276 | # CONFIG_NETWORK_SECMARK is not set | ||
277 | CONFIG_NETFILTER=y | ||
278 | # CONFIG_NETFILTER_DEBUG is not set | ||
279 | # CONFIG_NETFILTER_ADVANCED is not set | ||
280 | |||
281 | # | ||
282 | # Core Netfilter Configuration | ||
283 | # | ||
284 | CONFIG_NETFILTER_NETLINK=m | ||
285 | CONFIG_NETFILTER_NETLINK_LOG=m | ||
286 | CONFIG_NF_CONNTRACK=m | ||
287 | CONFIG_NF_CONNTRACK_FTP=m | ||
288 | CONFIG_NF_CONNTRACK_IRC=m | ||
289 | CONFIG_NF_CONNTRACK_SIP=m | ||
290 | CONFIG_NF_CT_NETLINK=m | ||
291 | CONFIG_NETFILTER_XTABLES=y | ||
292 | CONFIG_NETFILTER_XT_TARGET_MARK=m | ||
293 | CONFIG_NETFILTER_XT_TARGET_NFLOG=m | ||
294 | CONFIG_NETFILTER_XT_TARGET_TCPMSS=m | ||
295 | CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m | ||
296 | CONFIG_NETFILTER_XT_MATCH_MARK=m | ||
297 | CONFIG_NETFILTER_XT_MATCH_POLICY=m | ||
298 | CONFIG_NETFILTER_XT_MATCH_STATE=m | ||
299 | # CONFIG_IP_VS is not set | ||
300 | |||
301 | # | ||
302 | # IP: Netfilter Configuration | ||
303 | # | ||
304 | CONFIG_NF_DEFRAG_IPV4=m | ||
305 | CONFIG_NF_CONNTRACK_IPV4=m | ||
306 | CONFIG_NF_CONNTRACK_PROC_COMPAT=y | ||
307 | CONFIG_IP_NF_IPTABLES=m | ||
308 | CONFIG_IP_NF_FILTER=m | ||
309 | CONFIG_IP_NF_TARGET_REJECT=m | ||
310 | CONFIG_IP_NF_TARGET_LOG=m | ||
311 | # CONFIG_IP_NF_TARGET_ULOG is not set | ||
312 | CONFIG_NF_NAT=m | ||
313 | CONFIG_NF_NAT_NEEDED=y | ||
314 | CONFIG_IP_NF_TARGET_MASQUERADE=m | ||
315 | CONFIG_NF_NAT_FTP=m | ||
316 | CONFIG_NF_NAT_IRC=m | ||
317 | # CONFIG_NF_NAT_TFTP is not set | ||
318 | # CONFIG_NF_NAT_AMANDA is not set | ||
319 | # CONFIG_NF_NAT_PPTP is not set | ||
320 | # CONFIG_NF_NAT_H323 is not set | ||
321 | CONFIG_NF_NAT_SIP=m | ||
322 | CONFIG_IP_NF_MANGLE=m | ||
323 | # CONFIG_IP_DCCP is not set | ||
324 | # CONFIG_IP_SCTP is not set | ||
325 | # CONFIG_TIPC is not set | ||
326 | # CONFIG_ATM is not set | ||
327 | # CONFIG_BRIDGE is not set | ||
328 | # CONFIG_NET_DSA is not set | ||
329 | # CONFIG_VLAN_8021Q is not set | ||
330 | # CONFIG_DECNET is not set | ||
331 | # CONFIG_LLC2 is not set | ||
332 | # CONFIG_IPX is not set | ||
333 | # CONFIG_ATALK is not set | ||
334 | # CONFIG_X25 is not set | ||
335 | # CONFIG_LAPB is not set | ||
336 | # CONFIG_ECONET is not set | ||
337 | # CONFIG_WAN_ROUTER is not set | ||
338 | # CONFIG_NET_SCHED is not set | ||
339 | |||
340 | # | ||
341 | # Network testing | ||
342 | # | ||
343 | # CONFIG_NET_PKTGEN is not set | ||
344 | # CONFIG_NET_TCPPROBE is not set | ||
345 | # CONFIG_HAMRADIO is not set | ||
346 | # CONFIG_CAN is not set | ||
347 | # CONFIG_IRDA is not set | ||
348 | # CONFIG_BT is not set | ||
349 | # CONFIG_AF_RXRPC is not set | ||
350 | # CONFIG_PHONET is not set | ||
351 | CONFIG_WIRELESS=y | ||
352 | # CONFIG_CFG80211 is not set | ||
353 | # CONFIG_WIRELESS_OLD_REGULATORY is not set | ||
354 | # CONFIG_WIRELESS_EXT is not set | ||
355 | # CONFIG_MAC80211 is not set | ||
356 | # CONFIG_IEEE80211 is not set | ||
357 | # CONFIG_RFKILL is not set | ||
358 | # CONFIG_NET_9P is not set | ||
359 | |||
360 | # | ||
361 | # Device Drivers | ||
362 | # | ||
363 | |||
364 | # | ||
365 | # Generic Driver Options | ||
366 | # | ||
367 | CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" | ||
368 | CONFIG_STANDALONE=y | ||
369 | # CONFIG_PREVENT_FIRMWARE_BUILD is not set | ||
370 | # CONFIG_FW_LOADER is not set | ||
371 | # CONFIG_DEBUG_DRIVER is not set | ||
372 | # CONFIG_DEBUG_DEVRES is not set | ||
373 | # CONFIG_SYS_HYPERVISOR is not set | ||
374 | # CONFIG_CONNECTOR is not set | ||
375 | CONFIG_MTD=y | ||
376 | # CONFIG_MTD_DEBUG is not set | ||
377 | # CONFIG_MTD_CONCAT is not set | ||
378 | CONFIG_MTD_PARTITIONS=y | ||
379 | # CONFIG_MTD_REDBOOT_PARTS is not set | ||
380 | CONFIG_MTD_CMDLINE_PARTS=y | ||
381 | # CONFIG_MTD_AR7_PARTS is not set | ||
382 | |||
383 | # | ||
384 | # User Modules And Translation Layers | ||
385 | # | ||
386 | CONFIG_MTD_CHAR=y | ||
387 | CONFIG_MTD_BLKDEVS=y | ||
388 | CONFIG_MTD_BLOCK=y | ||
389 | # CONFIG_FTL is not set | ||
390 | # CONFIG_NFTL is not set | ||
391 | # CONFIG_INFTL is not set | ||
392 | # CONFIG_RFD_FTL is not set | ||
393 | # CONFIG_SSFDC is not set | ||
394 | # CONFIG_MTD_OOPS is not set | ||
395 | |||
396 | # | ||
397 | # RAM/ROM/Flash chip drivers | ||
398 | # | ||
399 | CONFIG_MTD_CFI=y | ||
400 | # CONFIG_MTD_JEDECPROBE is not set | ||
401 | CONFIG_MTD_GEN_PROBE=y | ||
402 | # CONFIG_MTD_CFI_ADV_OPTIONS is not set | ||
403 | CONFIG_MTD_MAP_BANK_WIDTH_1=y | ||
404 | CONFIG_MTD_MAP_BANK_WIDTH_2=y | ||
405 | CONFIG_MTD_MAP_BANK_WIDTH_4=y | ||
406 | # CONFIG_MTD_MAP_BANK_WIDTH_8 is not set | ||
407 | # CONFIG_MTD_MAP_BANK_WIDTH_16 is not set | ||
408 | # CONFIG_MTD_MAP_BANK_WIDTH_32 is not set | ||
409 | CONFIG_MTD_CFI_I1=y | ||
410 | CONFIG_MTD_CFI_I2=y | ||
411 | # CONFIG_MTD_CFI_I4 is not set | ||
412 | # CONFIG_MTD_CFI_I8 is not set | ||
413 | # CONFIG_MTD_CFI_INTELEXT is not set | ||
414 | CONFIG_MTD_CFI_AMDSTD=y | ||
415 | # CONFIG_MTD_CFI_STAA is not set | ||
416 | CONFIG_MTD_CFI_UTIL=y | ||
417 | # CONFIG_MTD_RAM is not set | ||
418 | # CONFIG_MTD_ROM is not set | ||
419 | # CONFIG_MTD_ABSENT is not set | ||
420 | |||
421 | # | ||
422 | # Mapping drivers for chip access | ||
423 | # | ||
424 | # CONFIG_MTD_COMPLEX_MAPPINGS is not set | ||
425 | CONFIG_MTD_PHYSMAP=y | ||
426 | CONFIG_MTD_PHYSMAP_START=0x80000000 | ||
427 | CONFIG_MTD_PHYSMAP_LEN=0x0 | ||
428 | CONFIG_MTD_PHYSMAP_BANKWIDTH=2 | ||
429 | # CONFIG_MTD_PLATRAM is not set | ||
430 | |||
431 | # | ||
432 | # Self-contained MTD device drivers | ||
433 | # | ||
434 | CONFIG_MTD_DATAFLASH=y | ||
435 | # CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set | ||
436 | # CONFIG_MTD_DATAFLASH_OTP is not set | ||
437 | # CONFIG_MTD_M25P80 is not set | ||
438 | # CONFIG_MTD_SLRAM is not set | ||
439 | # CONFIG_MTD_PHRAM is not set | ||
440 | # CONFIG_MTD_MTDRAM is not set | ||
441 | # CONFIG_MTD_BLOCK2MTD is not set | ||
442 | |||
443 | # | ||
444 | # Disk-On-Chip Device Drivers | ||
445 | # | ||
446 | # CONFIG_MTD_DOC2000 is not set | ||
447 | # CONFIG_MTD_DOC2001 is not set | ||
448 | # CONFIG_MTD_DOC2001PLUS is not set | ||
449 | # CONFIG_MTD_NAND is not set | ||
450 | # CONFIG_MTD_ONENAND is not set | ||
451 | |||
452 | # | ||
453 | # UBI - Unsorted block images | ||
454 | # | ||
455 | # CONFIG_MTD_UBI is not set | ||
456 | # CONFIG_PARPORT is not set | ||
457 | CONFIG_BLK_DEV=y | ||
458 | # CONFIG_BLK_DEV_COW_COMMON is not set | ||
459 | # CONFIG_BLK_DEV_LOOP is not set | ||
460 | # CONFIG_BLK_DEV_NBD is not set | ||
461 | # CONFIG_BLK_DEV_UB is not set | ||
462 | CONFIG_BLK_DEV_RAM=m | ||
463 | CONFIG_BLK_DEV_RAM_COUNT=16 | ||
464 | CONFIG_BLK_DEV_RAM_SIZE=4096 | ||
465 | # CONFIG_BLK_DEV_XIP is not set | ||
466 | # CONFIG_CDROM_PKTCDVD is not set | ||
467 | # CONFIG_ATA_OVER_ETH is not set | ||
468 | CONFIG_MISC_DEVICES=y | ||
469 | # CONFIG_ATMEL_PWM is not set | ||
470 | CONFIG_ATMEL_TCLIB=y | ||
471 | CONFIG_ATMEL_TCB_CLKSRC=y | ||
472 | CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0 | ||
473 | # CONFIG_EEPROM_93CX6 is not set | ||
474 | # CONFIG_ATMEL_SSC is not set | ||
475 | # CONFIG_ENCLOSURE_SERVICES is not set | ||
476 | |||
477 | # | ||
478 | # SCSI device support | ||
479 | # | ||
480 | # CONFIG_RAID_ATTRS is not set | ||
481 | CONFIG_SCSI=m | ||
482 | CONFIG_SCSI_DMA=y | ||
483 | # CONFIG_SCSI_TGT is not set | ||
484 | # CONFIG_SCSI_NETLINK is not set | ||
485 | CONFIG_SCSI_PROC_FS=y | ||
486 | |||
487 | # | ||
488 | # SCSI support type (disk, tape, CD-ROM) | ||
489 | # | ||
490 | CONFIG_BLK_DEV_SD=m | ||
491 | # CONFIG_CHR_DEV_ST is not set | ||
492 | # CONFIG_CHR_DEV_OSST is not set | ||
493 | # CONFIG_BLK_DEV_SR is not set | ||
494 | # CONFIG_CHR_DEV_SG is not set | ||
495 | # CONFIG_CHR_DEV_SCH is not set | ||
496 | |||
497 | # | ||
498 | # Some SCSI devices (e.g. CD jukebox) support multiple LUNs | ||
499 | # | ||
500 | # CONFIG_SCSI_MULTI_LUN is not set | ||
501 | # CONFIG_SCSI_CONSTANTS is not set | ||
502 | # CONFIG_SCSI_LOGGING is not set | ||
503 | # CONFIG_SCSI_SCAN_ASYNC is not set | ||
504 | CONFIG_SCSI_WAIT_SCAN=m | ||
505 | |||
506 | # | ||
507 | # SCSI Transports | ||
508 | # | ||
509 | # CONFIG_SCSI_SPI_ATTRS is not set | ||
510 | # CONFIG_SCSI_FC_ATTRS is not set | ||
511 | # CONFIG_SCSI_ISCSI_ATTRS is not set | ||
512 | # CONFIG_SCSI_SAS_LIBSAS is not set | ||
513 | # CONFIG_SCSI_SRP_ATTRS is not set | ||
514 | CONFIG_SCSI_LOWLEVEL=y | ||
515 | # CONFIG_ISCSI_TCP is not set | ||
516 | # CONFIG_SCSI_DEBUG is not set | ||
517 | # CONFIG_SCSI_DH is not set | ||
518 | # CONFIG_ATA is not set | ||
519 | # CONFIG_MD is not set | ||
520 | CONFIG_NETDEVICES=y | ||
521 | # CONFIG_DUMMY is not set | ||
522 | # CONFIG_BONDING is not set | ||
523 | # CONFIG_MACVLAN is not set | ||
524 | # CONFIG_EQUALIZER is not set | ||
525 | # CONFIG_TUN is not set | ||
526 | # CONFIG_VETH is not set | ||
527 | CONFIG_PHYLIB=y | ||
528 | |||
529 | # | ||
530 | # MII PHY device drivers | ||
531 | # | ||
532 | # CONFIG_MARVELL_PHY is not set | ||
533 | # CONFIG_DAVICOM_PHY is not set | ||
534 | # CONFIG_QSEMI_PHY is not set | ||
535 | # CONFIG_LXT_PHY is not set | ||
536 | # CONFIG_CICADA_PHY is not set | ||
537 | # CONFIG_VITESSE_PHY is not set | ||
538 | # CONFIG_SMSC_PHY is not set | ||
539 | # CONFIG_BROADCOM_PHY is not set | ||
540 | # CONFIG_ICPLUS_PHY is not set | ||
541 | # CONFIG_REALTEK_PHY is not set | ||
542 | # CONFIG_FIXED_PHY is not set | ||
543 | # CONFIG_MDIO_BITBANG is not set | ||
544 | CONFIG_NET_ETHERNET=y | ||
545 | # CONFIG_MII is not set | ||
546 | CONFIG_MACB=y | ||
547 | # CONFIG_ENC28J60 is not set | ||
548 | # CONFIG_IBM_NEW_EMAC_ZMII is not set | ||
549 | # CONFIG_IBM_NEW_EMAC_RGMII is not set | ||
550 | # CONFIG_IBM_NEW_EMAC_TAH is not set | ||
551 | # CONFIG_IBM_NEW_EMAC_EMAC4 is not set | ||
552 | # CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set | ||
553 | # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set | ||
554 | # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set | ||
555 | # CONFIG_B44 is not set | ||
556 | # CONFIG_NETDEV_1000 is not set | ||
557 | # CONFIG_NETDEV_10000 is not set | ||
558 | |||
559 | # | ||
560 | # Wireless LAN | ||
561 | # | ||
562 | # CONFIG_WLAN_PRE80211 is not set | ||
563 | # CONFIG_WLAN_80211 is not set | ||
564 | # CONFIG_IWLWIFI_LEDS is not set | ||
565 | |||
566 | # | ||
567 | # USB Network Adapters | ||
568 | # | ||
569 | # CONFIG_USB_CATC is not set | ||
570 | # CONFIG_USB_KAWETH is not set | ||
571 | # CONFIG_USB_PEGASUS is not set | ||
572 | # CONFIG_USB_RTL8150 is not set | ||
573 | # CONFIG_USB_USBNET is not set | ||
574 | # CONFIG_WAN is not set | ||
575 | # CONFIG_PPP is not set | ||
576 | # CONFIG_SLIP is not set | ||
577 | # CONFIG_NETCONSOLE is not set | ||
578 | # CONFIG_NETPOLL is not set | ||
579 | # CONFIG_NET_POLL_CONTROLLER is not set | ||
580 | # CONFIG_ISDN is not set | ||
581 | # CONFIG_PHONE is not set | ||
582 | |||
583 | # | ||
584 | # Input device support | ||
585 | # | ||
586 | CONFIG_INPUT=y | ||
587 | CONFIG_INPUT_FF_MEMLESS=m | ||
588 | # CONFIG_INPUT_POLLDEV is not set | ||
589 | |||
590 | # | ||
591 | # Userland interfaces | ||
592 | # | ||
593 | CONFIG_INPUT_MOUSEDEV=y | ||
594 | CONFIG_INPUT_MOUSEDEV_PSAUX=y | ||
595 | CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 | ||
596 | CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 | ||
597 | # CONFIG_INPUT_JOYDEV is not set | ||
598 | CONFIG_INPUT_EVDEV=m | ||
599 | # CONFIG_INPUT_EVBUG is not set | ||
600 | |||
601 | # | ||
602 | # Input Device Drivers | ||
603 | # | ||
604 | CONFIG_INPUT_KEYBOARD=y | ||
605 | CONFIG_KEYBOARD_ATKBD=y | ||
606 | # CONFIG_KEYBOARD_SUNKBD is not set | ||
607 | # CONFIG_KEYBOARD_LKKBD is not set | ||
608 | # CONFIG_KEYBOARD_XTKBD is not set | ||
609 | # CONFIG_KEYBOARD_NEWTON is not set | ||
610 | # CONFIG_KEYBOARD_STOWAWAY is not set | ||
611 | # CONFIG_KEYBOARD_GPIO is not set | ||
612 | CONFIG_INPUT_MOUSE=y | ||
613 | CONFIG_MOUSE_PS2=y | ||
614 | CONFIG_MOUSE_PS2_ALPS=y | ||
615 | CONFIG_MOUSE_PS2_LOGIPS2PP=y | ||
616 | CONFIG_MOUSE_PS2_SYNAPTICS=y | ||
617 | CONFIG_MOUSE_PS2_LIFEBOOK=y | ||
618 | CONFIG_MOUSE_PS2_TRACKPOINT=y | ||
619 | # CONFIG_MOUSE_PS2_TOUCHKIT is not set | ||
620 | # CONFIG_MOUSE_SERIAL is not set | ||
621 | # CONFIG_MOUSE_APPLETOUCH is not set | ||
622 | # CONFIG_MOUSE_BCM5974 is not set | ||
623 | # CONFIG_MOUSE_VSXXXAA is not set | ||
624 | # CONFIG_MOUSE_GPIO is not set | ||
625 | # CONFIG_INPUT_JOYSTICK is not set | ||
626 | # CONFIG_INPUT_TABLET is not set | ||
627 | CONFIG_INPUT_TOUCHSCREEN=y | ||
628 | # CONFIG_TOUCHSCREEN_ADS7846 is not set | ||
629 | # CONFIG_TOUCHSCREEN_FUJITSU is not set | ||
630 | # CONFIG_TOUCHSCREEN_GUNZE is not set | ||
631 | # CONFIG_TOUCHSCREEN_ELO is not set | ||
632 | # CONFIG_TOUCHSCREEN_MTOUCH is not set | ||
633 | # CONFIG_TOUCHSCREEN_INEXIO is not set | ||
634 | # CONFIG_TOUCHSCREEN_MK712 is not set | ||
635 | # CONFIG_TOUCHSCREEN_PENMOUNT is not set | ||
636 | # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set | ||
637 | # CONFIG_TOUCHSCREEN_TOUCHWIN is not set | ||
638 | # CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set | ||
639 | # CONFIG_TOUCHSCREEN_TOUCHIT213 is not set | ||
640 | # CONFIG_INPUT_MISC is not set | ||
641 | |||
642 | # | ||
643 | # Hardware I/O ports | ||
644 | # | ||
645 | CONFIG_SERIO=y | ||
646 | CONFIG_SERIO_I8042=y | ||
647 | CONFIG_SERIO_SERPORT=y | ||
648 | # CONFIG_SERIO_AT32PSIF is not set | ||
649 | CONFIG_SERIO_LIBPS2=y | ||
650 | # CONFIG_SERIO_RAW is not set | ||
651 | # CONFIG_GAMEPORT is not set | ||
652 | |||
653 | # | ||
654 | # Character devices | ||
655 | # | ||
656 | CONFIG_VT=y | ||
657 | CONFIG_CONSOLE_TRANSLATIONS=y | ||
658 | CONFIG_VT_CONSOLE=y | ||
659 | CONFIG_HW_CONSOLE=y | ||
660 | # CONFIG_VT_HW_CONSOLE_BINDING is not set | ||
661 | CONFIG_DEVKMEM=y | ||
662 | # CONFIG_SERIAL_NONSTANDARD is not set | ||
663 | |||
664 | # | ||
665 | # Serial drivers | ||
666 | # | ||
667 | # CONFIG_SERIAL_8250 is not set | ||
668 | |||
669 | # | ||
670 | # Non-8250 serial port support | ||
671 | # | ||
672 | CONFIG_SERIAL_ATMEL=y | ||
673 | CONFIG_SERIAL_ATMEL_CONSOLE=y | ||
674 | CONFIG_SERIAL_ATMEL_PDC=y | ||
675 | # CONFIG_SERIAL_ATMEL_TTYAT is not set | ||
676 | CONFIG_SERIAL_CORE=y | ||
677 | CONFIG_SERIAL_CORE_CONSOLE=y | ||
678 | CONFIG_UNIX98_PTYS=y | ||
679 | # CONFIG_LEGACY_PTYS is not set | ||
680 | # CONFIG_IPMI_HANDLER is not set | ||
681 | # CONFIG_HW_RANDOM is not set | ||
682 | # CONFIG_R3964 is not set | ||
683 | # CONFIG_RAW_DRIVER is not set | ||
684 | # CONFIG_TCG_TPM is not set | ||
685 | CONFIG_I2C=m | ||
686 | CONFIG_I2C_BOARDINFO=y | ||
687 | CONFIG_I2C_CHARDEV=m | ||
688 | CONFIG_I2C_HELPER_AUTO=y | ||
689 | CONFIG_I2C_ALGOBIT=m | ||
690 | |||
691 | # | ||
692 | # I2C Hardware Bus support | ||
693 | # | ||
694 | |||
695 | # | ||
696 | # I2C system bus drivers (mostly embedded / system-on-chip) | ||
697 | # | ||
698 | CONFIG_I2C_GPIO=m | ||
699 | # CONFIG_I2C_OCORES is not set | ||
700 | # CONFIG_I2C_SIMTEC is not set | ||
701 | |||
702 | # | ||
703 | # External I2C/SMBus adapter drivers | ||
704 | # | ||
705 | # CONFIG_I2C_PARPORT_LIGHT is not set | ||
706 | # CONFIG_I2C_TAOS_EVM is not set | ||
707 | # CONFIG_I2C_TINY_USB is not set | ||
708 | |||
709 | # | ||
710 | # Other I2C/SMBus bus drivers | ||
711 | # | ||
712 | # CONFIG_I2C_PCA_PLATFORM is not set | ||
713 | # CONFIG_I2C_STUB is not set | ||
714 | |||
715 | # | ||
716 | # Miscellaneous I2C Chip support | ||
717 | # | ||
718 | # CONFIG_DS1682 is not set | ||
719 | # CONFIG_AT24 is not set | ||
720 | # CONFIG_SENSORS_EEPROM is not set | ||
721 | # CONFIG_SENSORS_PCF8574 is not set | ||
722 | # CONFIG_PCF8575 is not set | ||
723 | # CONFIG_SENSORS_PCA9539 is not set | ||
724 | # CONFIG_SENSORS_PCF8591 is not set | ||
725 | # CONFIG_TPS65010 is not set | ||
726 | # CONFIG_SENSORS_MAX6875 is not set | ||
727 | # CONFIG_SENSORS_TSL2550 is not set | ||
728 | # CONFIG_I2C_DEBUG_CORE is not set | ||
729 | # CONFIG_I2C_DEBUG_ALGO is not set | ||
730 | # CONFIG_I2C_DEBUG_BUS is not set | ||
731 | # CONFIG_I2C_DEBUG_CHIP is not set | ||
732 | CONFIG_SPI=y | ||
733 | # CONFIG_SPI_DEBUG is not set | ||
734 | CONFIG_SPI_MASTER=y | ||
735 | |||
736 | # | ||
737 | # SPI Master Controller Drivers | ||
738 | # | ||
739 | CONFIG_SPI_ATMEL=y | ||
740 | # CONFIG_SPI_BITBANG is not set | ||
741 | |||
742 | # | ||
743 | # SPI Protocol Masters | ||
744 | # | ||
745 | # CONFIG_SPI_AT25 is not set | ||
746 | CONFIG_SPI_SPIDEV=m | ||
747 | # CONFIG_SPI_TLE62X0 is not set | ||
748 | CONFIG_ARCH_REQUIRE_GPIOLIB=y | ||
749 | CONFIG_GPIOLIB=y | ||
750 | # CONFIG_DEBUG_GPIO is not set | ||
751 | # CONFIG_GPIO_SYSFS is not set | ||
752 | |||
753 | # | ||
754 | # I2C GPIO expanders: | ||
755 | # | ||
756 | # CONFIG_GPIO_MAX732X is not set | ||
757 | # CONFIG_GPIO_PCA953X is not set | ||
758 | # CONFIG_GPIO_PCF857X is not set | ||
759 | |||
760 | # | ||
761 | # PCI GPIO expanders: | ||
762 | # | ||
763 | |||
764 | # | ||
765 | # SPI GPIO expanders: | ||
766 | # | ||
767 | # CONFIG_GPIO_MAX7301 is not set | ||
768 | # CONFIG_GPIO_MCP23S08 is not set | ||
769 | # CONFIG_W1 is not set | ||
770 | # CONFIG_POWER_SUPPLY is not set | ||
771 | # CONFIG_HWMON is not set | ||
772 | # CONFIG_THERMAL is not set | ||
773 | # CONFIG_THERMAL_HWMON is not set | ||
774 | CONFIG_WATCHDOG=y | ||
775 | # CONFIG_WATCHDOG_NOWAYOUT is not set | ||
776 | |||
777 | # | ||
778 | # Watchdog Device Drivers | ||
779 | # | ||
780 | # CONFIG_SOFT_WATCHDOG is not set | ||
781 | CONFIG_AT32AP700X_WDT=y | ||
782 | |||
783 | # | ||
784 | # USB-based Watchdog Cards | ||
785 | # | ||
786 | # CONFIG_USBPCWATCHDOG is not set | ||
787 | |||
788 | # | ||
789 | # Sonics Silicon Backplane | ||
790 | # | ||
791 | CONFIG_SSB_POSSIBLE=y | ||
792 | # CONFIG_SSB is not set | ||
793 | |||
794 | # | ||
795 | # Multifunction device drivers | ||
796 | # | ||
797 | # CONFIG_MFD_CORE is not set | ||
798 | # CONFIG_MFD_SM501 is not set | ||
799 | # CONFIG_HTC_PASIC3 is not set | ||
800 | # CONFIG_MFD_TMIO is not set | ||
801 | # CONFIG_MFD_WM8400 is not set | ||
802 | # CONFIG_MFD_WM8350_I2C is not set | ||
803 | |||
804 | # | ||
805 | # Multimedia devices | ||
806 | # | ||
807 | |||
808 | # | ||
809 | # Multimedia core support | ||
810 | # | ||
811 | # CONFIG_VIDEO_DEV is not set | ||
812 | # CONFIG_DVB_CORE is not set | ||
813 | # CONFIG_VIDEO_MEDIA is not set | ||
814 | |||
815 | # | ||
816 | # Multimedia drivers | ||
817 | # | ||
818 | # CONFIG_DAB is not set | ||
819 | |||
820 | # | ||
821 | # Graphics support | ||
822 | # | ||
823 | # CONFIG_VGASTATE is not set | ||
824 | # CONFIG_VIDEO_OUTPUT_CONTROL is not set | ||
825 | CONFIG_FB=y | ||
826 | # CONFIG_FIRMWARE_EDID is not set | ||
827 | # CONFIG_FB_DDC is not set | ||
828 | # CONFIG_FB_BOOT_VESA_SUPPORT is not set | ||
829 | CONFIG_FB_CFB_FILLRECT=y | ||
830 | CONFIG_FB_CFB_COPYAREA=y | ||
831 | CONFIG_FB_CFB_IMAGEBLIT=y | ||
832 | # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set | ||
833 | # CONFIG_FB_SYS_FILLRECT is not set | ||
834 | # CONFIG_FB_SYS_COPYAREA is not set | ||
835 | # CONFIG_FB_SYS_IMAGEBLIT is not set | ||
836 | # CONFIG_FB_FOREIGN_ENDIAN is not set | ||
837 | # CONFIG_FB_SYS_FOPS is not set | ||
838 | # CONFIG_FB_SVGALIB is not set | ||
839 | # CONFIG_FB_MACMODES is not set | ||
840 | # CONFIG_FB_BACKLIGHT is not set | ||
841 | # CONFIG_FB_MODE_HELPERS is not set | ||
842 | # CONFIG_FB_TILEBLITTING is not set | ||
843 | |||
844 | # | ||
845 | # Frame buffer hardware drivers | ||
846 | # | ||
847 | # CONFIG_FB_S1D13XXX is not set | ||
848 | CONFIG_FB_ATMEL=y | ||
849 | # CONFIG_FB_VIRTUAL is not set | ||
850 | # CONFIG_FB_METRONOME is not set | ||
851 | # CONFIG_BACKLIGHT_LCD_SUPPORT is not set | ||
852 | |||
853 | # | ||
854 | # Display device support | ||
855 | # | ||
856 | # CONFIG_DISPLAY_SUPPORT is not set | ||
857 | |||
858 | # | ||
859 | # Console display driver support | ||
860 | # | ||
861 | CONFIG_DUMMY_CONSOLE=y | ||
862 | CONFIG_FRAMEBUFFER_CONSOLE=y | ||
863 | # CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set | ||
864 | # CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set | ||
865 | # CONFIG_FONTS is not set | ||
866 | CONFIG_FONT_8x8=y | ||
867 | CONFIG_FONT_8x16=y | ||
868 | # CONFIG_LOGO is not set | ||
869 | CONFIG_SOUND=m | ||
870 | CONFIG_SOUND_OSS_CORE=y | ||
871 | CONFIG_SND=m | ||
872 | CONFIG_SND_TIMER=m | ||
873 | CONFIG_SND_PCM=m | ||
874 | CONFIG_SND_SEQUENCER=m | ||
875 | # CONFIG_SND_SEQ_DUMMY is not set | ||
876 | CONFIG_SND_OSSEMUL=y | ||
877 | CONFIG_SND_MIXER_OSS=m | ||
878 | CONFIG_SND_PCM_OSS=m | ||
879 | CONFIG_SND_PCM_OSS_PLUGINS=y | ||
880 | CONFIG_SND_SEQUENCER_OSS=y | ||
881 | # CONFIG_SND_DYNAMIC_MINORS is not set | ||
882 | # CONFIG_SND_SUPPORT_OLD_API is not set | ||
883 | CONFIG_SND_VERBOSE_PROCFS=y | ||
884 | # CONFIG_SND_VERBOSE_PRINTK is not set | ||
885 | # CONFIG_SND_DEBUG is not set | ||
886 | CONFIG_SND_DRIVERS=y | ||
887 | # CONFIG_SND_DUMMY is not set | ||
888 | # CONFIG_SND_VIRMIDI is not set | ||
889 | # CONFIG_SND_MTPAV is not set | ||
890 | # CONFIG_SND_SERIAL_U16550 is not set | ||
891 | # CONFIG_SND_MPU401 is not set | ||
892 | CONFIG_SND_SPI=y | ||
893 | CONFIG_SND_USB=y | ||
894 | # CONFIG_SND_USB_AUDIO is not set | ||
895 | # CONFIG_SND_USB_CAIAQ is not set | ||
896 | # CONFIG_SND_SOC is not set | ||
897 | # CONFIG_SOUND_PRIME is not set | ||
898 | CONFIG_HID_SUPPORT=y | ||
899 | CONFIG_HID=y | ||
900 | # CONFIG_HID_DEBUG is not set | ||
901 | # CONFIG_HIDRAW is not set | ||
902 | |||
903 | # | ||
904 | # USB Input Devices | ||
905 | # | ||
906 | CONFIG_USB_HID=m | ||
907 | # CONFIG_HID_PID is not set | ||
908 | # CONFIG_USB_HIDDEV is not set | ||
909 | |||
910 | # | ||
911 | # USB HID Boot Protocol drivers | ||
912 | # | ||
913 | # CONFIG_USB_KBD is not set | ||
914 | # CONFIG_USB_MOUSE is not set | ||
915 | |||
916 | # | ||
917 | # Special HID drivers | ||
918 | # | ||
919 | CONFIG_HID_COMPAT=y | ||
920 | CONFIG_HID_A4TECH=m | ||
921 | CONFIG_HID_APPLE=m | ||
922 | CONFIG_HID_BELKIN=m | ||
923 | CONFIG_HID_BRIGHT=m | ||
924 | CONFIG_HID_CHERRY=m | ||
925 | CONFIG_HID_CHICONY=m | ||
926 | CONFIG_HID_CYPRESS=m | ||
927 | CONFIG_HID_DELL=m | ||
928 | CONFIG_HID_EZKEY=m | ||
929 | CONFIG_HID_GYRATION=m | ||
930 | CONFIG_HID_LOGITECH=m | ||
931 | # CONFIG_LOGITECH_FF is not set | ||
932 | # CONFIG_LOGIRUMBLEPAD2_FF is not set | ||
933 | CONFIG_HID_MICROSOFT=m | ||
934 | CONFIG_HID_MONTEREY=m | ||
935 | CONFIG_HID_PANTHERLORD=m | ||
936 | # CONFIG_PANTHERLORD_FF is not set | ||
937 | CONFIG_HID_PETALYNX=m | ||
938 | CONFIG_HID_SAMSUNG=m | ||
939 | CONFIG_HID_SONY=m | ||
940 | CONFIG_HID_SUNPLUS=m | ||
941 | CONFIG_THRUSTMASTER_FF=m | ||
942 | CONFIG_ZEROPLUS_FF=m | ||
943 | CONFIG_USB_SUPPORT=y | ||
944 | CONFIG_USB_ARCH_HAS_HCD=y | ||
945 | # CONFIG_USB_ARCH_HAS_OHCI is not set | ||
946 | # CONFIG_USB_ARCH_HAS_EHCI is not set | ||
947 | CONFIG_USB=m | ||
948 | # CONFIG_USB_DEBUG is not set | ||
949 | # CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set | ||
950 | |||
951 | # | ||
952 | # Miscellaneous USB options | ||
953 | # | ||
954 | CONFIG_USB_DEVICEFS=y | ||
955 | # CONFIG_USB_DEVICE_CLASS is not set | ||
956 | # CONFIG_USB_DYNAMIC_MINORS is not set | ||
957 | # CONFIG_USB_OTG is not set | ||
958 | # CONFIG_USB_OTG_WHITELIST is not set | ||
959 | # CONFIG_USB_OTG_BLACKLIST_HUB is not set | ||
960 | CONFIG_USB_MON=y | ||
961 | |||
962 | # | ||
963 | # USB Host Controller Drivers | ||
964 | # | ||
965 | # CONFIG_USB_C67X00_HCD is not set | ||
966 | CONFIG_USB_ISP116X_HCD=m | ||
967 | # CONFIG_USB_ISP1760_HCD is not set | ||
968 | # CONFIG_USB_SL811_HCD is not set | ||
969 | # CONFIG_USB_R8A66597_HCD is not set | ||
970 | # CONFIG_USB_MUSB_HDRC is not set | ||
971 | # CONFIG_USB_GADGET_MUSB_HDRC is not set | ||
972 | |||
973 | # | ||
974 | # USB Device Class drivers | ||
975 | # | ||
976 | # CONFIG_USB_ACM is not set | ||
977 | # CONFIG_USB_PRINTER is not set | ||
978 | # CONFIG_USB_WDM is not set | ||
979 | # CONFIG_USB_TMC is not set | ||
980 | |||
981 | # | ||
982 | # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' | ||
983 | # | ||
984 | |||
985 | # | ||
986 | # may also be needed; see USB_STORAGE Help for more information | ||
987 | # | ||
988 | CONFIG_USB_STORAGE=m | ||
989 | # CONFIG_USB_STORAGE_DEBUG is not set | ||
990 | # CONFIG_USB_STORAGE_DATAFAB is not set | ||
991 | # CONFIG_USB_STORAGE_FREECOM is not set | ||
992 | # CONFIG_USB_STORAGE_ISD200 is not set | ||
993 | # CONFIG_USB_STORAGE_DPCM is not set | ||
994 | # CONFIG_USB_STORAGE_USBAT is not set | ||
995 | # CONFIG_USB_STORAGE_SDDR09 is not set | ||
996 | # CONFIG_USB_STORAGE_SDDR55 is not set | ||
997 | # CONFIG_USB_STORAGE_JUMPSHOT is not set | ||
998 | # CONFIG_USB_STORAGE_ALAUDA is not set | ||
999 | # CONFIG_USB_STORAGE_ONETOUCH is not set | ||
1000 | # CONFIG_USB_STORAGE_KARMA is not set | ||
1001 | # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set | ||
1002 | # CONFIG_USB_LIBUSUAL is not set | ||
1003 | |||
1004 | # | ||
1005 | # USB Imaging devices | ||
1006 | # | ||
1007 | # CONFIG_USB_MDC800 is not set | ||
1008 | # CONFIG_USB_MICROTEK is not set | ||
1009 | |||
1010 | # | ||
1011 | # USB port drivers | ||
1012 | # | ||
1013 | # CONFIG_USB_SERIAL is not set | ||
1014 | |||
1015 | # | ||
1016 | # USB Miscellaneous drivers | ||
1017 | # | ||
1018 | # CONFIG_USB_EMI62 is not set | ||
1019 | # CONFIG_USB_EMI26 is not set | ||
1020 | # CONFIG_USB_ADUTUX is not set | ||
1021 | # CONFIG_USB_SEVSEG is not set | ||
1022 | # CONFIG_USB_RIO500 is not set | ||
1023 | # CONFIG_USB_LEGOTOWER is not set | ||
1024 | # CONFIG_USB_LCD is not set | ||
1025 | # CONFIG_USB_BERRY_CHARGE is not set | ||
1026 | # CONFIG_USB_LED is not set | ||
1027 | # CONFIG_USB_CYPRESS_CY7C63 is not set | ||
1028 | # CONFIG_USB_CYTHERM is not set | ||
1029 | # CONFIG_USB_PHIDGET is not set | ||
1030 | # CONFIG_USB_IDMOUSE is not set | ||
1031 | # CONFIG_USB_FTDI_ELAN is not set | ||
1032 | # CONFIG_USB_APPLEDISPLAY is not set | ||
1033 | # CONFIG_USB_LD is not set | ||
1034 | # CONFIG_USB_TRANCEVIBRATOR is not set | ||
1035 | # CONFIG_USB_IOWARRIOR is not set | ||
1036 | # CONFIG_USB_TEST is not set | ||
1037 | # CONFIG_USB_ISIGHTFW is not set | ||
1038 | # CONFIG_USB_VST is not set | ||
1039 | CONFIG_USB_GADGET=y | ||
1040 | # CONFIG_USB_GADGET_DEBUG is not set | ||
1041 | # CONFIG_USB_GADGET_DEBUG_FILES is not set | ||
1042 | CONFIG_USB_GADGET_VBUS_DRAW=2 | ||
1043 | CONFIG_USB_GADGET_SELECTED=y | ||
1044 | # CONFIG_USB_GADGET_AT91 is not set | ||
1045 | CONFIG_USB_GADGET_ATMEL_USBA=y | ||
1046 | CONFIG_USB_ATMEL_USBA=y | ||
1047 | # CONFIG_USB_GADGET_FSL_USB2 is not set | ||
1048 | # CONFIG_USB_GADGET_LH7A40X is not set | ||
1049 | # CONFIG_USB_GADGET_OMAP is not set | ||
1050 | # CONFIG_USB_GADGET_PXA25X is not set | ||
1051 | # CONFIG_USB_GADGET_PXA27X is not set | ||
1052 | # CONFIG_USB_GADGET_S3C2410 is not set | ||
1053 | # CONFIG_USB_GADGET_M66592 is not set | ||
1054 | # CONFIG_USB_GADGET_AMD5536UDC is not set | ||
1055 | # CONFIG_USB_GADGET_FSL_QE is not set | ||
1056 | # CONFIG_USB_GADGET_NET2280 is not set | ||
1057 | # CONFIG_USB_GADGET_GOKU is not set | ||
1058 | # CONFIG_USB_GADGET_DUMMY_HCD is not set | ||
1059 | CONFIG_USB_GADGET_DUALSPEED=y | ||
1060 | CONFIG_USB_ZERO=m | ||
1061 | CONFIG_USB_ETH=m | ||
1062 | CONFIG_USB_ETH_RNDIS=y | ||
1063 | CONFIG_USB_GADGETFS=m | ||
1064 | CONFIG_USB_FILE_STORAGE=m | ||
1065 | # CONFIG_USB_FILE_STORAGE_TEST is not set | ||
1066 | CONFIG_USB_G_SERIAL=m | ||
1067 | # CONFIG_USB_MIDI_GADGET is not set | ||
1068 | # CONFIG_USB_G_PRINTER is not set | ||
1069 | # CONFIG_USB_CDC_COMPOSITE is not set | ||
1070 | CONFIG_MMC=m | ||
1071 | # CONFIG_MMC_DEBUG is not set | ||
1072 | # CONFIG_MMC_UNSAFE_RESUME is not set | ||
1073 | |||
1074 | # | ||
1075 | # MMC/SD/SDIO Card Drivers | ||
1076 | # | ||
1077 | CONFIG_MMC_BLOCK=m | ||
1078 | CONFIG_MMC_BLOCK_BOUNCE=y | ||
1079 | # CONFIG_SDIO_UART is not set | ||
1080 | # CONFIG_MMC_TEST is not set | ||
1081 | |||
1082 | # | ||
1083 | # MMC/SD/SDIO Host Controller Drivers | ||
1084 | # | ||
1085 | # CONFIG_MMC_SDHCI is not set | ||
1086 | CONFIG_MMC_ATMELMCI=m | ||
1087 | # CONFIG_MMC_SPI is not set | ||
1088 | # CONFIG_MEMSTICK is not set | ||
1089 | # CONFIG_NEW_LEDS is not set | ||
1090 | # CONFIG_ACCESSIBILITY is not set | ||
1091 | CONFIG_RTC_LIB=y | ||
1092 | CONFIG_RTC_CLASS=y | ||
1093 | CONFIG_RTC_HCTOSYS=y | ||
1094 | CONFIG_RTC_HCTOSYS_DEVICE="rtc0" | ||
1095 | # CONFIG_RTC_DEBUG is not set | ||
1096 | |||
1097 | # | ||
1098 | # RTC interfaces | ||
1099 | # | ||
1100 | CONFIG_RTC_INTF_SYSFS=y | ||
1101 | CONFIG_RTC_INTF_PROC=y | ||
1102 | CONFIG_RTC_INTF_DEV=y | ||
1103 | # CONFIG_RTC_INTF_DEV_UIE_EMUL is not set | ||
1104 | # CONFIG_RTC_DRV_TEST is not set | ||
1105 | |||
1106 | # | ||
1107 | # I2C RTC drivers | ||
1108 | # | ||
1109 | # CONFIG_RTC_DRV_DS1307 is not set | ||
1110 | # CONFIG_RTC_DRV_DS1374 is not set | ||
1111 | # CONFIG_RTC_DRV_DS1672 is not set | ||
1112 | # CONFIG_RTC_DRV_MAX6900 is not set | ||
1113 | # CONFIG_RTC_DRV_RS5C372 is not set | ||
1114 | # CONFIG_RTC_DRV_ISL1208 is not set | ||
1115 | # CONFIG_RTC_DRV_X1205 is not set | ||
1116 | # CONFIG_RTC_DRV_PCF8563 is not set | ||
1117 | # CONFIG_RTC_DRV_PCF8583 is not set | ||
1118 | # CONFIG_RTC_DRV_M41T80 is not set | ||
1119 | # CONFIG_RTC_DRV_S35390A is not set | ||
1120 | # CONFIG_RTC_DRV_FM3130 is not set | ||
1121 | |||
1122 | # | ||
1123 | # SPI RTC drivers | ||
1124 | # | ||
1125 | # CONFIG_RTC_DRV_M41T94 is not set | ||
1126 | # CONFIG_RTC_DRV_DS1305 is not set | ||
1127 | # CONFIG_RTC_DRV_MAX6902 is not set | ||
1128 | # CONFIG_RTC_DRV_R9701 is not set | ||
1129 | # CONFIG_RTC_DRV_RS5C348 is not set | ||
1130 | # CONFIG_RTC_DRV_DS3234 is not set | ||
1131 | |||
1132 | # | ||
1133 | # Platform RTC drivers | ||
1134 | # | ||
1135 | # CONFIG_RTC_DRV_DS1286 is not set | ||
1136 | # CONFIG_RTC_DRV_DS1511 is not set | ||
1137 | # CONFIG_RTC_DRV_DS1553 is not set | ||
1138 | # CONFIG_RTC_DRV_DS1742 is not set | ||
1139 | # CONFIG_RTC_DRV_STK17TA8 is not set | ||
1140 | # CONFIG_RTC_DRV_M48T86 is not set | ||
1141 | # CONFIG_RTC_DRV_M48T35 is not set | ||
1142 | # CONFIG_RTC_DRV_M48T59 is not set | ||
1143 | # CONFIG_RTC_DRV_BQ4802 is not set | ||
1144 | # CONFIG_RTC_DRV_V3020 is not set | ||
1145 | |||
1146 | # | ||
1147 | # on-CPU RTC drivers | ||
1148 | # | ||
1149 | CONFIG_RTC_DRV_AT32AP700X=y | ||
1150 | # CONFIG_DMADEVICES is not set | ||
1151 | # CONFIG_UIO is not set | ||
1152 | # CONFIG_STAGING is not set | ||
1153 | |||
1154 | # | ||
1155 | # File systems | ||
1156 | # | ||
1157 | CONFIG_EXT2_FS=m | ||
1158 | # CONFIG_EXT2_FS_XATTR is not set | ||
1159 | # CONFIG_EXT2_FS_XIP is not set | ||
1160 | # CONFIG_EXT3_FS is not set | ||
1161 | # CONFIG_EXT4_FS is not set | ||
1162 | # CONFIG_REISERFS_FS is not set | ||
1163 | # CONFIG_JFS_FS is not set | ||
1164 | # CONFIG_FS_POSIX_ACL is not set | ||
1165 | CONFIG_FILE_LOCKING=y | ||
1166 | # CONFIG_XFS_FS is not set | ||
1167 | # CONFIG_OCFS2_FS is not set | ||
1168 | # CONFIG_DNOTIFY is not set | ||
1169 | CONFIG_INOTIFY=y | ||
1170 | CONFIG_INOTIFY_USER=y | ||
1171 | # CONFIG_QUOTA is not set | ||
1172 | # CONFIG_AUTOFS_FS is not set | ||
1173 | # CONFIG_AUTOFS4_FS is not set | ||
1174 | # CONFIG_FUSE_FS is not set | ||
1175 | |||
1176 | # | ||
1177 | # CD-ROM/DVD Filesystems | ||
1178 | # | ||
1179 | # CONFIG_ISO9660_FS is not set | ||
1180 | # CONFIG_UDF_FS is not set | ||
1181 | |||
1182 | # | ||
1183 | # DOS/FAT/NT Filesystems | ||
1184 | # | ||
1185 | CONFIG_FAT_FS=y | ||
1186 | CONFIG_MSDOS_FS=y | ||
1187 | CONFIG_VFAT_FS=m | ||
1188 | CONFIG_FAT_DEFAULT_CODEPAGE=850 | ||
1189 | CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" | ||
1190 | # CONFIG_NTFS_FS is not set | ||
1191 | |||
1192 | # | ||
1193 | # Pseudo filesystems | ||
1194 | # | ||
1195 | CONFIG_PROC_FS=y | ||
1196 | # CONFIG_PROC_KCORE is not set | ||
1197 | CONFIG_PROC_SYSCTL=y | ||
1198 | CONFIG_PROC_PAGE_MONITOR=y | ||
1199 | CONFIG_SYSFS=y | ||
1200 | CONFIG_TMPFS=y | ||
1201 | # CONFIG_TMPFS_POSIX_ACL is not set | ||
1202 | # CONFIG_HUGETLB_PAGE is not set | ||
1203 | CONFIG_CONFIGFS_FS=y | ||
1204 | |||
1205 | # | ||
1206 | # Miscellaneous filesystems | ||
1207 | # | ||
1208 | # CONFIG_ADFS_FS is not set | ||
1209 | # CONFIG_AFFS_FS is not set | ||
1210 | # CONFIG_HFS_FS is not set | ||
1211 | # CONFIG_HFSPLUS_FS is not set | ||
1212 | # CONFIG_BEFS_FS is not set | ||
1213 | # CONFIG_BFS_FS is not set | ||
1214 | # CONFIG_EFS_FS is not set | ||
1215 | CONFIG_JFFS2_FS=y | ||
1216 | CONFIG_JFFS2_FS_DEBUG=0 | ||
1217 | CONFIG_JFFS2_FS_WRITEBUFFER=y | ||
1218 | # CONFIG_JFFS2_FS_WBUF_VERIFY is not set | ||
1219 | # CONFIG_JFFS2_SUMMARY is not set | ||
1220 | # CONFIG_JFFS2_FS_XATTR is not set | ||
1221 | # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set | ||
1222 | CONFIG_JFFS2_ZLIB=y | ||
1223 | # CONFIG_JFFS2_LZO is not set | ||
1224 | CONFIG_JFFS2_RTIME=y | ||
1225 | # CONFIG_JFFS2_RUBIN is not set | ||
1226 | # CONFIG_CRAMFS is not set | ||
1227 | # CONFIG_VXFS_FS is not set | ||
1228 | # CONFIG_MINIX_FS is not set | ||
1229 | # CONFIG_OMFS_FS is not set | ||
1230 | # CONFIG_HPFS_FS is not set | ||
1231 | # CONFIG_QNX4FS_FS is not set | ||
1232 | # CONFIG_ROMFS_FS is not set | ||
1233 | # CONFIG_SYSV_FS is not set | ||
1234 | # CONFIG_UFS_FS is not set | ||
1235 | CONFIG_NETWORK_FILESYSTEMS=y | ||
1236 | CONFIG_NFS_FS=y | ||
1237 | CONFIG_NFS_V3=y | ||
1238 | # CONFIG_NFS_V3_ACL is not set | ||
1239 | # CONFIG_NFS_V4 is not set | ||
1240 | CONFIG_ROOT_NFS=y | ||
1241 | # CONFIG_NFSD is not set | ||
1242 | CONFIG_LOCKD=y | ||
1243 | CONFIG_LOCKD_V4=y | ||
1244 | CONFIG_NFS_COMMON=y | ||
1245 | CONFIG_SUNRPC=y | ||
1246 | # CONFIG_SUNRPC_REGISTER_V4 is not set | ||
1247 | # CONFIG_RPCSEC_GSS_KRB5 is not set | ||
1248 | # CONFIG_RPCSEC_GSS_SPKM3 is not set | ||
1249 | # CONFIG_SMB_FS is not set | ||
1250 | # CONFIG_CIFS is not set | ||
1251 | # CONFIG_NCP_FS is not set | ||
1252 | # CONFIG_CODA_FS is not set | ||
1253 | # CONFIG_AFS_FS is not set | ||
1254 | |||
1255 | # | ||
1256 | # Partition Types | ||
1257 | # | ||
1258 | # CONFIG_PARTITION_ADVANCED is not set | ||
1259 | CONFIG_MSDOS_PARTITION=y | ||
1260 | CONFIG_NLS=y | ||
1261 | CONFIG_NLS_DEFAULT="iso8859-1" | ||
1262 | CONFIG_NLS_CODEPAGE_437=m | ||
1263 | # CONFIG_NLS_CODEPAGE_737 is not set | ||
1264 | # CONFIG_NLS_CODEPAGE_775 is not set | ||
1265 | CONFIG_NLS_CODEPAGE_850=m | ||
1266 | # CONFIG_NLS_CODEPAGE_852 is not set | ||
1267 | # CONFIG_NLS_CODEPAGE_855 is not set | ||
1268 | # CONFIG_NLS_CODEPAGE_857 is not set | ||
1269 | # CONFIG_NLS_CODEPAGE_860 is not set | ||
1270 | # CONFIG_NLS_CODEPAGE_861 is not set | ||
1271 | # CONFIG_NLS_CODEPAGE_862 is not set | ||
1272 | # CONFIG_NLS_CODEPAGE_863 is not set | ||
1273 | # CONFIG_NLS_CODEPAGE_864 is not set | ||
1274 | # CONFIG_NLS_CODEPAGE_865 is not set | ||
1275 | # CONFIG_NLS_CODEPAGE_866 is not set | ||
1276 | # CONFIG_NLS_CODEPAGE_869 is not set | ||
1277 | # CONFIG_NLS_CODEPAGE_936 is not set | ||
1278 | # CONFIG_NLS_CODEPAGE_950 is not set | ||
1279 | # CONFIG_NLS_CODEPAGE_932 is not set | ||
1280 | # CONFIG_NLS_CODEPAGE_949 is not set | ||
1281 | # CONFIG_NLS_CODEPAGE_874 is not set | ||
1282 | # CONFIG_NLS_ISO8859_8 is not set | ||
1283 | # CONFIG_NLS_CODEPAGE_1250 is not set | ||
1284 | # CONFIG_NLS_CODEPAGE_1251 is not set | ||
1285 | # CONFIG_NLS_ASCII is not set | ||
1286 | CONFIG_NLS_ISO8859_1=m | ||
1287 | # CONFIG_NLS_ISO8859_2 is not set | ||
1288 | # CONFIG_NLS_ISO8859_3 is not set | ||
1289 | # CONFIG_NLS_ISO8859_4 is not set | ||
1290 | # CONFIG_NLS_ISO8859_5 is not set | ||
1291 | # CONFIG_NLS_ISO8859_6 is not set | ||
1292 | # CONFIG_NLS_ISO8859_7 is not set | ||
1293 | # CONFIG_NLS_ISO8859_9 is not set | ||
1294 | # CONFIG_NLS_ISO8859_13 is not set | ||
1295 | # CONFIG_NLS_ISO8859_14 is not set | ||
1296 | # CONFIG_NLS_ISO8859_15 is not set | ||
1297 | # CONFIG_NLS_KOI8_R is not set | ||
1298 | # CONFIG_NLS_KOI8_U is not set | ||
1299 | CONFIG_NLS_UTF8=m | ||
1300 | # CONFIG_DLM is not set | ||
1301 | |||
1302 | # | ||
1303 | # Kernel hacking | ||
1304 | # | ||
1305 | # CONFIG_PRINTK_TIME is not set | ||
1306 | CONFIG_ENABLE_WARN_DEPRECATED=y | ||
1307 | CONFIG_ENABLE_MUST_CHECK=y | ||
1308 | CONFIG_FRAME_WARN=1024 | ||
1309 | CONFIG_MAGIC_SYSRQ=y | ||
1310 | # CONFIG_UNUSED_SYMBOLS is not set | ||
1311 | # CONFIG_DEBUG_FS is not set | ||
1312 | # CONFIG_HEADERS_CHECK is not set | ||
1313 | CONFIG_DEBUG_KERNEL=y | ||
1314 | # CONFIG_DEBUG_SHIRQ is not set | ||
1315 | CONFIG_DETECT_SOFTLOCKUP=y | ||
1316 | # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set | ||
1317 | CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 | ||
1318 | CONFIG_SCHED_DEBUG=y | ||
1319 | # CONFIG_SCHEDSTATS is not set | ||
1320 | # CONFIG_TIMER_STATS is not set | ||
1321 | # CONFIG_DEBUG_OBJECTS is not set | ||
1322 | # CONFIG_SLUB_DEBUG_ON is not set | ||
1323 | # CONFIG_SLUB_STATS is not set | ||
1324 | # CONFIG_DEBUG_RT_MUTEXES is not set | ||
1325 | # CONFIG_RT_MUTEX_TESTER is not set | ||
1326 | # CONFIG_DEBUG_SPINLOCK is not set | ||
1327 | # CONFIG_DEBUG_MUTEXES is not set | ||
1328 | # CONFIG_DEBUG_LOCK_ALLOC is not set | ||
1329 | # CONFIG_PROVE_LOCKING is not set | ||
1330 | # CONFIG_LOCK_STAT is not set | ||
1331 | # CONFIG_DEBUG_SPINLOCK_SLEEP is not set | ||
1332 | # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set | ||
1333 | # CONFIG_DEBUG_KOBJECT is not set | ||
1334 | CONFIG_DEBUG_BUGVERBOSE=y | ||
1335 | # CONFIG_DEBUG_INFO is not set | ||
1336 | # CONFIG_DEBUG_VM is not set | ||
1337 | # CONFIG_DEBUG_WRITECOUNT is not set | ||
1338 | # CONFIG_DEBUG_MEMORY_INIT is not set | ||
1339 | # CONFIG_DEBUG_LIST is not set | ||
1340 | # CONFIG_DEBUG_SG is not set | ||
1341 | CONFIG_FRAME_POINTER=y | ||
1342 | # CONFIG_BOOT_PRINTK_DELAY is not set | ||
1343 | # CONFIG_RCU_TORTURE_TEST is not set | ||
1344 | # CONFIG_RCU_CPU_STALL_DETECTOR is not set | ||
1345 | # CONFIG_KPROBES_SANITY_TEST is not set | ||
1346 | # CONFIG_BACKTRACE_SELF_TEST is not set | ||
1347 | # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set | ||
1348 | # CONFIG_LKDTM is not set | ||
1349 | # CONFIG_FAULT_INJECTION is not set | ||
1350 | # CONFIG_DYNAMIC_PRINTK_DEBUG is not set | ||
1351 | # CONFIG_SAMPLES is not set | ||
1352 | |||
1353 | # | ||
1354 | # Security options | ||
1355 | # | ||
1356 | # CONFIG_KEYS is not set | ||
1357 | # CONFIG_SECURITY is not set | ||
1358 | # CONFIG_SECURITYFS is not set | ||
1359 | # CONFIG_SECURITY_FILE_CAPABILITIES is not set | ||
1360 | CONFIG_CRYPTO=y | ||
1361 | |||
1362 | # | ||
1363 | # Crypto core or helper | ||
1364 | # | ||
1365 | # CONFIG_CRYPTO_FIPS is not set | ||
1366 | CONFIG_CRYPTO_ALGAPI=y | ||
1367 | CONFIG_CRYPTO_AEAD=y | ||
1368 | CONFIG_CRYPTO_BLKCIPHER=y | ||
1369 | CONFIG_CRYPTO_HASH=y | ||
1370 | CONFIG_CRYPTO_RNG=y | ||
1371 | CONFIG_CRYPTO_MANAGER=y | ||
1372 | # CONFIG_CRYPTO_GF128MUL is not set | ||
1373 | # CONFIG_CRYPTO_NULL is not set | ||
1374 | # CONFIG_CRYPTO_CRYPTD is not set | ||
1375 | CONFIG_CRYPTO_AUTHENC=y | ||
1376 | # CONFIG_CRYPTO_TEST is not set | ||
1377 | |||
1378 | # | ||
1379 | # Authenticated Encryption with Associated Data | ||
1380 | # | ||
1381 | # CONFIG_CRYPTO_CCM is not set | ||
1382 | # CONFIG_CRYPTO_GCM is not set | ||
1383 | # CONFIG_CRYPTO_SEQIV is not set | ||
1384 | |||
1385 | # | ||
1386 | # Block modes | ||
1387 | # | ||
1388 | CONFIG_CRYPTO_CBC=y | ||
1389 | # CONFIG_CRYPTO_CTR is not set | ||
1390 | # CONFIG_CRYPTO_CTS is not set | ||
1391 | CONFIG_CRYPTO_ECB=m | ||
1392 | # CONFIG_CRYPTO_LRW is not set | ||
1393 | CONFIG_CRYPTO_PCBC=m | ||
1394 | # CONFIG_CRYPTO_XTS is not set | ||
1395 | |||
1396 | # | ||
1397 | # Hash modes | ||
1398 | # | ||
1399 | CONFIG_CRYPTO_HMAC=y | ||
1400 | # CONFIG_CRYPTO_XCBC is not set | ||
1401 | |||
1402 | # | ||
1403 | # Digest | ||
1404 | # | ||
1405 | # CONFIG_CRYPTO_CRC32C is not set | ||
1406 | # CONFIG_CRYPTO_MD4 is not set | ||
1407 | CONFIG_CRYPTO_MD5=y | ||
1408 | # CONFIG_CRYPTO_MICHAEL_MIC is not set | ||
1409 | # CONFIG_CRYPTO_RMD128 is not set | ||
1410 | # CONFIG_CRYPTO_RMD160 is not set | ||
1411 | # CONFIG_CRYPTO_RMD256 is not set | ||
1412 | # CONFIG_CRYPTO_RMD320 is not set | ||
1413 | CONFIG_CRYPTO_SHA1=y | ||
1414 | # CONFIG_CRYPTO_SHA256 is not set | ||
1415 | # CONFIG_CRYPTO_SHA512 is not set | ||
1416 | # CONFIG_CRYPTO_TGR192 is not set | ||
1417 | # CONFIG_CRYPTO_WP512 is not set | ||
1418 | |||
1419 | # | ||
1420 | # Ciphers | ||
1421 | # | ||
1422 | # CONFIG_CRYPTO_AES is not set | ||
1423 | # CONFIG_CRYPTO_ANUBIS is not set | ||
1424 | CONFIG_CRYPTO_ARC4=m | ||
1425 | # CONFIG_CRYPTO_BLOWFISH is not set | ||
1426 | # CONFIG_CRYPTO_CAMELLIA is not set | ||
1427 | # CONFIG_CRYPTO_CAST5 is not set | ||
1428 | # CONFIG_CRYPTO_CAST6 is not set | ||
1429 | CONFIG_CRYPTO_DES=y | ||
1430 | # CONFIG_CRYPTO_FCRYPT is not set | ||
1431 | # CONFIG_CRYPTO_KHAZAD is not set | ||
1432 | # CONFIG_CRYPTO_SALSA20 is not set | ||
1433 | # CONFIG_CRYPTO_SEED is not set | ||
1434 | # CONFIG_CRYPTO_SERPENT is not set | ||
1435 | # CONFIG_CRYPTO_TEA is not set | ||
1436 | # CONFIG_CRYPTO_TWOFISH is not set | ||
1437 | |||
1438 | # | ||
1439 | # Compression | ||
1440 | # | ||
1441 | CONFIG_CRYPTO_DEFLATE=y | ||
1442 | # CONFIG_CRYPTO_LZO is not set | ||
1443 | |||
1444 | # | ||
1445 | # Random Number Generation | ||
1446 | # | ||
1447 | # CONFIG_CRYPTO_ANSI_CPRNG is not set | ||
1448 | CONFIG_CRYPTO_HW=y | ||
1449 | |||
1450 | # | ||
1451 | # Library routines | ||
1452 | # | ||
1453 | CONFIG_BITREVERSE=y | ||
1454 | CONFIG_CRC_CCITT=m | ||
1455 | # CONFIG_CRC16 is not set | ||
1456 | # CONFIG_CRC_T10DIF is not set | ||
1457 | CONFIG_CRC_ITU_T=m | ||
1458 | CONFIG_CRC32=y | ||
1459 | CONFIG_CRC7=m | ||
1460 | # CONFIG_LIBCRC32C is not set | ||
1461 | CONFIG_ZLIB_INFLATE=y | ||
1462 | CONFIG_ZLIB_DEFLATE=y | ||
1463 | CONFIG_GENERIC_ALLOCATOR=y | ||
1464 | CONFIG_PLIST=y | ||
1465 | CONFIG_HAS_IOMEM=y | ||
1466 | CONFIG_HAS_IOPORT=y | ||
1467 | CONFIG_HAS_DMA=y | ||
diff --git a/arch/avr32/kernel/process.c b/arch/avr32/kernel/process.c index 134d5302b6dd..43ae555ecb33 100644 --- a/arch/avr32/kernel/process.c +++ b/arch/avr32/kernel/process.c | |||
@@ -18,6 +18,7 @@ | |||
18 | 18 | ||
19 | #include <asm/sysreg.h> | 19 | #include <asm/sysreg.h> |
20 | #include <asm/ocd.h> | 20 | #include <asm/ocd.h> |
21 | #include <asm/syscalls.h> | ||
21 | 22 | ||
22 | #include <mach/pm.h> | 23 | #include <mach/pm.h> |
23 | 24 | ||
diff --git a/arch/avr32/kernel/signal.c b/arch/avr32/kernel/signal.c index c5b11f9067f1..803d7be0938f 100644 --- a/arch/avr32/kernel/signal.c +++ b/arch/avr32/kernel/signal.c | |||
@@ -19,6 +19,7 @@ | |||
19 | 19 | ||
20 | #include <asm/uaccess.h> | 20 | #include <asm/uaccess.h> |
21 | #include <asm/ucontext.h> | 21 | #include <asm/ucontext.h> |
22 | #include <asm/syscalls.h> | ||
22 | 23 | ||
23 | #define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP))) | 24 | #define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP))) |
24 | 25 | ||
diff --git a/arch/avr32/kernel/sys_avr32.c b/arch/avr32/kernel/sys_avr32.c index 8e8911e55c8f..5d2daeaf356f 100644 --- a/arch/avr32/kernel/sys_avr32.c +++ b/arch/avr32/kernel/sys_avr32.c | |||
@@ -13,6 +13,7 @@ | |||
13 | 13 | ||
14 | #include <asm/mman.h> | 14 | #include <asm/mman.h> |
15 | #include <asm/uaccess.h> | 15 | #include <asm/uaccess.h> |
16 | #include <asm/syscalls.h> | ||
16 | 17 | ||
17 | asmlinkage long sys_mmap2(unsigned long addr, unsigned long len, | 18 | asmlinkage long sys_mmap2(unsigned long addr, unsigned long len, |
18 | unsigned long prot, unsigned long flags, | 19 | unsigned long prot, unsigned long flags, |
diff --git a/arch/avr32/mach-at32ap/at32ap700x.c b/arch/avr32/mach-at32ap/at32ap700x.c index 3cf49553e4f9..ea7bc1e8562b 100644 --- a/arch/avr32/mach-at32ap/at32ap700x.c +++ b/arch/avr32/mach-at32ap/at32ap700x.c | |||
@@ -421,7 +421,7 @@ static unsigned long hsb_clk_get_rate(struct clk *clk) | |||
421 | return bus_clk_get_rate(clk, shift); | 421 | return bus_clk_get_rate(clk, shift); |
422 | } | 422 | } |
423 | 423 | ||
424 | static void pba_clk_mode(struct clk *clk, int enabled) | 424 | void pba_clk_mode(struct clk *clk, int enabled) |
425 | { | 425 | { |
426 | unsigned long flags; | 426 | unsigned long flags; |
427 | u32 mask; | 427 | u32 mask; |
@@ -436,7 +436,7 @@ static void pba_clk_mode(struct clk *clk, int enabled) | |||
436 | spin_unlock_irqrestore(&pm_lock, flags); | 436 | spin_unlock_irqrestore(&pm_lock, flags); |
437 | } | 437 | } |
438 | 438 | ||
439 | static unsigned long pba_clk_get_rate(struct clk *clk) | 439 | unsigned long pba_clk_get_rate(struct clk *clk) |
440 | { | 440 | { |
441 | unsigned long cksel, shift = 0; | 441 | unsigned long cksel, shift = 0; |
442 | 442 | ||
diff --git a/arch/avr32/mach-at32ap/clock.c b/arch/avr32/mach-at32ap/clock.c index 138a00a2a2d0..442f08c5e641 100644 --- a/arch/avr32/mach-at32ap/clock.c +++ b/arch/avr32/mach-at32ap/clock.c | |||
@@ -198,7 +198,7 @@ dump_clock(struct clk *parent, struct clkinf *r) | |||
198 | unsigned i; | 198 | unsigned i; |
199 | 199 | ||
200 | /* skip clocks coupled to devices that aren't registered */ | 200 | /* skip clocks coupled to devices that aren't registered */ |
201 | if (parent->dev && !parent->dev->bus_id[0] && !parent->users) | 201 | if (parent->dev && !dev_name(parent->dev) && !parent->users) |
202 | return; | 202 | return; |
203 | 203 | ||
204 | /* <nest spaces> name <pad to end> */ | 204 | /* <nest spaces> name <pad to end> */ |
@@ -214,7 +214,7 @@ dump_clock(struct clk *parent, struct clkinf *r) | |||
214 | parent->users ? "on" : "off", /* NOTE: not-paranoid!! */ | 214 | parent->users ? "on" : "off", /* NOTE: not-paranoid!! */ |
215 | clk_get_rate(parent)); | 215 | clk_get_rate(parent)); |
216 | if (parent->dev) | 216 | if (parent->dev) |
217 | seq_printf(r->s, ", for %s", parent->dev->bus_id); | 217 | seq_printf(r->s, ", for %s", dev_name(parent->dev)); |
218 | seq_printf(r->s, "\n"); | 218 | seq_printf(r->s, "\n"); |
219 | 219 | ||
220 | /* cost of this scan is small, but not linear... */ | 220 | /* cost of this scan is small, but not linear... */ |
diff --git a/arch/avr32/mach-at32ap/clock.h b/arch/avr32/mach-at32ap/clock.h index 623bf0e9a1e7..4c7ebbdc6dfa 100644 --- a/arch/avr32/mach-at32ap/clock.h +++ b/arch/avr32/mach-at32ap/clock.h | |||
@@ -30,3 +30,6 @@ struct clk { | |||
30 | u16 users; /* Enabled if non-zero */ | 30 | u16 users; /* Enabled if non-zero */ |
31 | u16 index; /* Sibling index */ | 31 | u16 index; /* Sibling index */ |
32 | }; | 32 | }; |
33 | |||
34 | unsigned long pba_clk_get_rate(struct clk *clk); | ||
35 | void pba_clk_mode(struct clk *clk, int enabled); | ||
diff --git a/arch/avr32/mach-at32ap/include/mach/at32ap700x.h b/arch/avr32/mach-at32ap/include/mach/at32ap700x.h index a77d372f6f3e..5c4c971eed8e 100644 --- a/arch/avr32/mach-at32ap/include/mach/at32ap700x.h +++ b/arch/avr32/mach-at32ap/include/mach/at32ap700x.h | |||
@@ -211,4 +211,7 @@ | |||
211 | 211 | ||
212 | #define ATMEL_LCDC_ALT_15BIT (ATMEL_LCDC_CONTROL | ATMEL_LCDC_ALT_15B_DATA) | 212 | #define ATMEL_LCDC_ALT_15BIT (ATMEL_LCDC_CONTROL | ATMEL_LCDC_ALT_15B_DATA) |
213 | 213 | ||
214 | /* Bitmask for all EBI data (D16..D31) pins on port E */ | ||
215 | #define ATMEL_EBI_PE_DATA_ALL (0x0000FFFF) | ||
216 | |||
214 | #endif /* __ASM_ARCH_AT32AP700X_H__ */ | 217 | #endif /* __ASM_ARCH_AT32AP700X_H__ */ |
diff --git a/arch/avr32/mach-at32ap/include/mach/portmux.h b/arch/avr32/mach-at32ap/include/mach/portmux.h index 21c79373b53f..4873024e3b96 100644 --- a/arch/avr32/mach-at32ap/include/mach/portmux.h +++ b/arch/avr32/mach-at32ap/include/mach/portmux.h | |||
@@ -25,6 +25,6 @@ void at32_select_periph(unsigned int port, unsigned int pin, | |||
25 | unsigned int periph, unsigned long flags); | 25 | unsigned int periph, unsigned long flags); |
26 | void at32_select_gpio(unsigned int pin, unsigned long flags); | 26 | void at32_select_gpio(unsigned int pin, unsigned long flags); |
27 | void at32_deselect_pin(unsigned int pin); | 27 | void at32_deselect_pin(unsigned int pin); |
28 | void at32_reserve_pin(unsigned int pin); | 28 | void at32_reserve_pin(unsigned int port, u32 pin_mask); |
29 | 29 | ||
30 | #endif /* __ASM_ARCH_PORTMUX_H__ */ | 30 | #endif /* __ASM_ARCH_PORTMUX_H__ */ |
diff --git a/arch/avr32/mach-at32ap/pio.c b/arch/avr32/mach-at32ap/pio.c index ed81a8bcb22d..09a274c9d0b7 100644 --- a/arch/avr32/mach-at32ap/pio.c +++ b/arch/avr32/mach-at32ap/pio.c | |||
@@ -167,22 +167,29 @@ void at32_deselect_pin(unsigned int pin) | |||
167 | } | 167 | } |
168 | 168 | ||
169 | /* Reserve a pin, preventing anyone else from changing its configuration. */ | 169 | /* Reserve a pin, preventing anyone else from changing its configuration. */ |
170 | void __init at32_reserve_pin(unsigned int pin) | 170 | void __init at32_reserve_pin(unsigned int port, u32 pin_mask) |
171 | { | 171 | { |
172 | struct pio_device *pio; | 172 | struct pio_device *pio; |
173 | unsigned int pin_index = pin & 0x1f; | ||
174 | 173 | ||
175 | pio = gpio_to_pio(pin); | 174 | /* assign and verify pio */ |
175 | pio = gpio_to_pio(port); | ||
176 | if (unlikely(!pio)) { | 176 | if (unlikely(!pio)) { |
177 | printk("pio: invalid pin %u\n", pin); | 177 | printk(KERN_WARNING "pio: invalid port %u\n", port); |
178 | goto fail; | 178 | goto fail; |
179 | } | 179 | } |
180 | 180 | ||
181 | if (unlikely(test_and_set_bit(pin_index, &pio->pinmux_mask))) { | 181 | /* Test if any of the requested pins is already muxed */ |
182 | printk("%s: pin %u is busy\n", pio->name, pin_index); | 182 | spin_lock(&pio_lock); |
183 | if (unlikely(pio->pinmux_mask & pin_mask)) { | ||
184 | printk(KERN_WARNING "%s: pin(s) busy (req. 0x%x, busy 0x%x)\n", | ||
185 | pio->name, pin_mask, pio->pinmux_mask & pin_mask); | ||
186 | spin_unlock(&pio_lock); | ||
183 | goto fail; | 187 | goto fail; |
184 | } | 188 | } |
185 | 189 | ||
190 | /* Reserve pins */ | ||
191 | pio->pinmux_mask |= pin_mask; | ||
192 | spin_unlock(&pio_lock); | ||
186 | return; | 193 | return; |
187 | 194 | ||
188 | fail: | 195 | fail: |
diff --git a/arch/avr32/mm/cache.c b/arch/avr32/mm/cache.c index 15a4e5e142c1..24a74d1ca7d9 100644 --- a/arch/avr32/mm/cache.c +++ b/arch/avr32/mm/cache.c | |||
@@ -13,6 +13,7 @@ | |||
13 | #include <asm/cachectl.h> | 13 | #include <asm/cachectl.h> |
14 | #include <asm/processor.h> | 14 | #include <asm/processor.h> |
15 | #include <asm/uaccess.h> | 15 | #include <asm/uaccess.h> |
16 | #include <asm/syscalls.h> | ||
16 | 17 | ||
17 | /* | 18 | /* |
18 | * If you attempt to flush anything more than this, you need superuser | 19 | * If you attempt to flush anything more than this, you need superuser |