aboutsummaryrefslogtreecommitdiffstats
path: root/arch/avr32
diff options
context:
space:
mode:
Diffstat (limited to 'arch/avr32')
-rw-r--r--arch/avr32/boards/atngw100/Kconfig27
-rw-r--r--arch/avr32/boards/atngw100/Kconfig_mrmt80
-rw-r--r--arch/avr32/boards/atngw100/Makefile1
-rw-r--r--arch/avr32/boards/atngw100/mrmt.c373
-rw-r--r--arch/avr32/boards/atngw100/setup.c5
-rw-r--r--arch/avr32/boards/merisc/setup.c7
-rw-r--r--arch/avr32/boards/mimc200/setup.c29
-rw-r--r--arch/avr32/configs/atngw100_mrmt_defconfig1363
-rw-r--r--arch/avr32/include/asm/atomic.h2
-rw-r--r--arch/avr32/include/asm/bitsperlong.h1
-rw-r--r--arch/avr32/include/asm/hw_irq.h2
-rw-r--r--arch/avr32/include/asm/mman.h2
-rw-r--r--arch/avr32/include/asm/signal.h2
-rw-r--r--arch/avr32/include/asm/termios.h2
-rw-r--r--arch/avr32/kernel/module.c2
-rw-r--r--arch/avr32/kernel/traps.c11
-rw-r--r--arch/avr32/mach-at32ap/include/mach/board.h2
17 files changed, 1883 insertions, 28 deletions
diff --git a/arch/avr32/boards/atngw100/Kconfig b/arch/avr32/boards/atngw100/Kconfig
index b3f99477bbeb..be27a0218ab4 100644
--- a/arch/avr32/boards/atngw100/Kconfig
+++ b/arch/avr32/boards/atngw100/Kconfig
@@ -2,8 +2,15 @@
2 2
3if BOARD_ATNGW100 3if BOARD_ATNGW100
4 4
5choice
6 prompt "Select an NGW100 add-on board to support"
7 default BOARD_ATNGW100_ADDON_NONE
8
9config BOARD_ATNGW100_ADDON_NONE
10 bool "None"
11
5config BOARD_ATNGW100_EVKLCD10X 12config BOARD_ATNGW100_EVKLCD10X
6 bool "Add support for EVKLCD10X addon board" 13 bool "EVKLCD10X addon board"
7 help 14 help
8 This enables support for the EVKLCD100 (QVGA) or EVKLCD101 (VGA) 15 This enables support for the EVKLCD100 (QVGA) or EVKLCD101 (VGA)
9 addon board for the NGW100. By enabling this the LCD controller and 16 addon board for the NGW100. By enabling this the LCD controller and
@@ -14,7 +21,19 @@ config BOARD_ATNGW100_EVKLCD10X
14 The MCI pins can be reenabled by editing the "add device function" but 21 The MCI pins can be reenabled by editing the "add device function" but
15 this may break the setup for other displays that use these pins. 22 this may break the setup for other displays that use these pins.
16 23
17 Choose 'Y' here if you have a EVKLCD100/101 connected to the NGW100. 24config BOARD_ATNGW100_MRMT
25 bool "Mediama RMT1/2 add-on board"
26 help
27 This enables support for the Mediama RMT1 or RMT2 board.
28 RMT provides LCD support, AC97 codec and other
29 optional peripherals to the Atmel NGW100.
30
31 This choice disables the detect pin and the write-protect pin for the
32 MCI platform device, since it conflicts with the LCD platform device.
33 The MCI pins can be reenabled by editing the "add device function" but
34 this may break the setup for other displays that use these pins.
35
36endchoice
18 37
19choice 38choice
20 prompt "LCD panel resolution on EVKLCD10X" 39 prompt "LCD panel resolution on EVKLCD10X"
@@ -32,4 +51,8 @@ config BOARD_ATNGW100_EVKLCD10X_POW_QVGA
32 51
33endchoice 52endchoice
34 53
54if BOARD_ATNGW100_MRMT
55source "arch/avr32/boards/atngw100/Kconfig_mrmt"
56endif
57
35endif # BOARD_ATNGW100 58endif # BOARD_ATNGW100
diff --git a/arch/avr32/boards/atngw100/Kconfig_mrmt b/arch/avr32/boards/atngw100/Kconfig_mrmt
new file mode 100644
index 000000000000..9a199a207f3c
--- /dev/null
+++ b/arch/avr32/boards/atngw100/Kconfig_mrmt
@@ -0,0 +1,80 @@
1# RMT for NGW100 customization
2
3choice
4 prompt "RMT Version"
5 help
6 Select the RMTx board version.
7
8config BOARD_MRMT_REV1
9 bool "RMT1"
10config BOARD_MRMT_REV2
11 bool "RMT2"
12
13endchoice
14
15config BOARD_MRMT_AC97
16 bool "Enable AC97 CODEC"
17 help
18 Enable the UCB1400 AC97 CODEC driver.
19
20choice
21 prompt "Touchscreen Driver"
22 default BOARD_MRMT_ADS7846_TS
23
24config BOARD_MRMT_UCB1400_TS
25 bool "Use UCB1400 Touchscreen"
26
27config BOARD_MRMT_ADS7846_TS
28 bool "Use ADS7846 Touchscreen"
29
30endchoice
31
32choice
33 prompt "RMTx LCD Selection"
34 default BOARD_MRMT_LCD_DISABLE
35
36config BOARD_MRMT_LCD_DISABLE
37 bool "LCD Disabled"
38
39config BOARD_MRMT_LCD_LQ043T3DX0X
40 bool "Sharp LQ043T3DX0x or compatible"
41 help
42 If using RMT2, be sure to load the resistor pack selectors accordingly
43
44if BOARD_MRMT_REV2
45config BOARD_MRMT_LCD_KWH043GM08
46 bool "Formike KWH043GM08 or compatible"
47 help
48 Be sure to load the RMT2 resistor pack selectors accordingly
49endif
50
51endchoice
52
53if !BOARD_MRMT_LCD_DISABLE
54config BOARD_MRMT_BL_PWM
55 bool "Use PWM control for LCD Backlight"
56 help
57 Use PWM driver for controlling LCD Backlight.
58 Otherwise, LCD Backlight is always on.
59endif
60
61config BOARD_MRMT_RTC_I2C
62 bool "Use External RTC on I2C Bus"
63 help
64 RMT1 has an optional RTC device on the I2C bus.
65 It is a SII S35390A. Be sure to select the
66 matching RTC driver.
67
68choice
69 prompt "Wireless Module on ttyS2"
70 default BOARD_MRMT_WIRELESS_ZB
71
72config BOARD_MRMT_WIRELESS_ZB
73 bool "Use ZigBee/802.15.4 Module"
74
75config BOARD_MRMT_WIRELESS_BT
76 bool "Use Bluetooth (HCI) Module"
77
78config BOARD_MRMT_WIRELESS_NONE
79 bool "Not Installed"
80endchoice
diff --git a/arch/avr32/boards/atngw100/Makefile b/arch/avr32/boards/atngw100/Makefile
index 6376f5322e4d..f4ebe42a8254 100644
--- a/arch/avr32/boards/atngw100/Makefile
+++ b/arch/avr32/boards/atngw100/Makefile
@@ -1,2 +1,3 @@
1obj-y += setup.o flash.o 1obj-y += setup.o flash.o
2obj-$(CONFIG_BOARD_ATNGW100_EVKLCD10X) += evklcd10x.o 2obj-$(CONFIG_BOARD_ATNGW100_EVKLCD10X) += evklcd10x.o
3obj-$(CONFIG_BOARD_ATNGW100_MRMT) += mrmt.o
diff --git a/arch/avr32/boards/atngw100/mrmt.c b/arch/avr32/boards/atngw100/mrmt.c
new file mode 100644
index 000000000000..bf78e516a85f
--- /dev/null
+++ b/arch/avr32/boards/atngw100/mrmt.c
@@ -0,0 +1,373 @@
1/*
2 * Board-specific setup code for Remote Media Terminal 1 (RMT1)
3 * add-on board for the ATNGW100 Network Gateway
4 *
5 * Copyright (C) 2008 Mediama Technologies
6 * Based on ATNGW100 Network Gateway (Copyright (C) Atmel)
7 *
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License version 2 as
10 * published by the Free Software Foundation.
11 */
12#include <linux/gpio.h>
13#include <linux/init.h>
14#include <linux/irq.h>
15#include <linux/linkage.h>
16#include <linux/platform_device.h>
17#include <linux/types.h>
18#include <linux/fb.h>
19#include <linux/leds.h>
20#include <linux/input.h>
21#include <linux/gpio_keys.h>
22#include <linux/atmel_serial.h>
23#include <linux/spi/spi.h>
24#include <linux/spi/ads7846.h>
25
26#include <video/atmel_lcdc.h>
27#include <sound/atmel-ac97c.h>
28
29#include <asm/delay.h>
30#include <asm/io.h>
31#include <asm/setup.h>
32
33#include <mach/at32ap700x.h>
34#include <mach/board.h>
35#include <mach/init.h>
36#include <mach/portmux.h>
37
38/* Define board-specifoic GPIO assignments */
39#define PIN_LCD_BL GPIO_PIN_PA(28)
40#define PWM_CH_BL 0 /* Must match with GPIO pin definition */
41#define PIN_LCD_DISP GPIO_PIN_PA(31)
42#define PIN_AC97_RST_N GPIO_PIN_PA(30)
43#define PB_EXTINT_BASE 25
44#define TS_IRQ 0
45#define PIN_TS_EXTINT GPIO_PIN_PB(PB_EXTINT_BASE+TS_IRQ)
46#define PIN_PB_LEFT GPIO_PIN_PB(11)
47#define PIN_PB_RIGHT GPIO_PIN_PB(12)
48#define PIN_PWR_SW_N GPIO_PIN_PB(14)
49#define PIN_PWR_ON GPIO_PIN_PB(13)
50#define PIN_ZB_RST_N GPIO_PIN_PA(21)
51#define PIN_BT_RST GPIO_PIN_PA(22)
52#define PIN_LED_SYS GPIO_PIN_PA(16)
53#define PIN_LED_A GPIO_PIN_PA(19)
54#define PIN_LED_B GPIO_PIN_PE(19)
55
56#ifdef CONFIG_BOARD_MRMT_LCD_LQ043T3DX0X
57/* Sharp LQ043T3DX0x (or compatible) panel */
58static struct fb_videomode __initdata lcd_fb_modes[] = {
59 {
60 .name = "480x272 @ 59.94Hz",
61 .refresh = 59.94,
62 .xres = 480, .yres = 272,
63 .pixclock = KHZ2PICOS(9000),
64
65 .left_margin = 2, .right_margin = 2,
66 .upper_margin = 3, .lower_margin = 9,
67 .hsync_len = 41, .vsync_len = 1,
68
69 .sync = 0,
70 .vmode = FB_VMODE_NONINTERLACED,
71 },
72};
73
74static struct fb_monspecs __initdata lcd_fb_default_monspecs = {
75 .manufacturer = "SHA",
76 .monitor = "LQ043T3DX02",
77 .modedb = lcd_fb_modes,
78 .modedb_len = ARRAY_SIZE(lcd_fb_modes),
79 .hfmin = 14915,
80 .hfmax = 17638,
81 .vfmin = 53,
82 .vfmax = 61,
83 .dclkmax = 9260000,
84};
85
86static struct atmel_lcdfb_info __initdata rmt_lcdc_data = {
87 .default_bpp = 24,
88 .default_dmacon = ATMEL_LCDC_DMAEN | ATMEL_LCDC_DMA2DEN,
89 .default_lcdcon2 = (ATMEL_LCDC_DISTYPE_TFT
90 | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE
91 | ATMEL_LCDC_INVCLK_NORMAL
92 | ATMEL_LCDC_MEMOR_BIG),
93 .lcd_wiring_mode = ATMEL_LCDC_WIRING_RGB,
94 .default_monspecs = &lcd_fb_default_monspecs,
95 .guard_time = 2,
96};
97#endif
98
99#ifdef CONFIG_BOARD_MRMT_LCD_KWH043GM08
100/* Sharp KWH043GM08-Fxx (or compatible) panel */
101static struct fb_videomode __initdata lcd_fb_modes[] = {
102 {
103 .name = "480x272 @ 59.94Hz",
104 .refresh = 59.94,
105 .xres = 480, .yres = 272,
106 .pixclock = KHZ2PICOS(9000),
107
108 .left_margin = 2, .right_margin = 2,
109 .upper_margin = 3, .lower_margin = 9,
110 .hsync_len = 41, .vsync_len = 1,
111
112 .sync = 0,
113 .vmode = FB_VMODE_NONINTERLACED,
114 },
115};
116
117static struct fb_monspecs __initdata lcd_fb_default_monspecs = {
118 .manufacturer = "FOR",
119 .monitor = "KWH043GM08",
120 .modedb = lcd_fb_modes,
121 .modedb_len = ARRAY_SIZE(lcd_fb_modes),
122 .hfmin = 14915,
123 .hfmax = 17638,
124 .vfmin = 53,
125 .vfmax = 61,
126 .dclkmax = 9260000,
127};
128
129static struct atmel_lcdfb_info __initdata rmt_lcdc_data = {
130 .default_bpp = 24,
131 .default_dmacon = ATMEL_LCDC_DMAEN | ATMEL_LCDC_DMA2DEN,
132 .default_lcdcon2 = (ATMEL_LCDC_DISTYPE_TFT
133 | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE
134 | ATMEL_LCDC_INVCLK_INVERTED
135 | ATMEL_LCDC_MEMOR_BIG),
136 .lcd_wiring_mode = ATMEL_LCDC_WIRING_RGB,
137 .default_monspecs = &lcd_fb_default_monspecs,
138 .guard_time = 2,
139};
140#endif
141
142#ifdef CONFIG_BOARD_MRMT_AC97
143static struct ac97c_platform_data __initdata ac97c0_data = {
144 .reset_pin = PIN_AC97_RST_N,
145};
146#endif
147
148#ifdef CONFIG_BOARD_MRMT_UCB1400_TS
149/* NOTE: IRQ assignment relies on kernel module parameter */
150static struct platform_device rmt_ts_device = {
151 .name = "ucb1400_ts",
152 .id = -1,
153 }
154};
155#endif
156
157#ifdef CONFIG_BOARD_MRMT_BL_PWM
158/* PWM LEDs: LCD Backlight, etc */
159static struct gpio_led rmt_pwm_led[] = {
160 /* here the "gpio" is actually a PWM channel */
161 { .name = "backlight", .gpio = PWM_CH_BL, },
162};
163
164static struct gpio_led_platform_data rmt_pwm_led_data = {
165 .num_leds = ARRAY_SIZE(rmt_pwm_led),
166 .leds = rmt_pwm_led,
167};
168
169static struct platform_device rmt_pwm_led_dev = {
170 .name = "leds-atmel-pwm",
171 .id = -1,
172 .dev = {
173 .platform_data = &rmt_pwm_led_data,
174 },
175};
176#endif
177
178#ifdef CONFIG_BOARD_MRMT_ADS7846_TS
179static int ads7846_pendown_state(void)
180{
181 return !gpio_get_value( PIN_TS_EXTINT ); /* PENIRQ.*/
182}
183
184static struct ads7846_platform_data ads_info = {
185 .model = 7846,
186 .keep_vref_on = 0, /* Use external VREF pin */
187 .vref_delay_usecs = 0,
188 .vref_mv = 3300, /* VREF = 3.3V */
189 .settle_delay_usecs = 800,
190 .penirq_recheck_delay_usecs = 800,
191 .x_plate_ohms = 750,
192 .y_plate_ohms = 300,
193 .pressure_max = 4096,
194 .debounce_max = 1,
195 .debounce_rep = 0,
196 .debounce_tol = (~0),
197 .get_pendown_state = ads7846_pendown_state,
198 .filter = NULL,
199 .filter_init = NULL,
200};
201
202static struct spi_board_info spi01_board_info[] __initdata = {
203 {
204 .modalias = "ads7846",
205 .max_speed_hz = 31250*26,
206 .bus_num = 0,
207 .chip_select = 1,
208 .platform_data = &ads_info,
209 .irq = AT32_EXTINT(TS_IRQ),
210 },
211};
212#endif
213
214/* GPIO Keys: left, right, power, etc */
215static const struct gpio_keys_button rmt_gpio_keys_buttons[] = {
216 [0] = {
217 .type = EV_KEY,
218 .code = KEY_POWER,
219 .gpio = PIN_PWR_SW_N,
220 .active_low = 1,
221 .desc = "power button",
222 },
223 [1] = {
224 .type = EV_KEY,
225 .code = KEY_LEFT,
226 .gpio = PIN_PB_LEFT,
227 .active_low = 1,
228 .desc = "left button",
229 },
230 [2] = {
231 .type = EV_KEY,
232 .code = KEY_RIGHT,
233 .gpio = PIN_PB_RIGHT,
234 .active_low = 1,
235 .desc = "right button",
236 },
237};
238
239static const struct gpio_keys_platform_data rmt_gpio_keys_data = {
240 .nbuttons = ARRAY_SIZE(rmt_gpio_keys_buttons),
241 .buttons = (void *) rmt_gpio_keys_buttons,
242};
243
244static struct platform_device rmt_gpio_keys = {
245 .name = "gpio-keys",
246 .id = -1,
247 .dev = {
248 .platform_data = (void *) &rmt_gpio_keys_data,
249 }
250};
251
252#ifdef CONFIG_BOARD_MRMT_RTC_I2C
253static struct i2c_board_info __initdata mrmt1_i2c_rtc = {
254 I2C_BOARD_INFO("s35390a", 0x30),
255 .irq = 0,
256};
257#endif
258
259static void mrmt_power_off(void)
260{
261 /* PWR_ON=0 will force power off */
262 gpio_set_value( PIN_PWR_ON, 0 );
263}
264
265static int __init mrmt1_init(void)
266{
267 gpio_set_value( PIN_PWR_ON, 1 ); /* Ensure PWR_ON is enabled */
268
269 pm_power_off = mrmt_power_off;
270
271 /* Setup USARTS (other than console) */
272 at32_map_usart(2, 1, 0); /* USART 2: /dev/ttyS1, RMT1:DB9M */
273 at32_map_usart(3, 2, ATMEL_USART_RTS | ATMEL_USART_CTS);
274 /* USART 3: /dev/ttyS2, RMT1:Wireless, w/ RTS/CTS */
275 at32_add_device_usart(1);
276 at32_add_device_usart(2);
277
278 /* Select GPIO Key pins */
279 at32_select_gpio( PIN_PWR_SW_N, AT32_GPIOF_DEGLITCH);
280 at32_select_gpio( PIN_PB_LEFT, AT32_GPIOF_DEGLITCH);
281 at32_select_gpio( PIN_PB_RIGHT, AT32_GPIOF_DEGLITCH);
282 platform_device_register(&rmt_gpio_keys);
283
284#ifdef CONFIG_BOARD_MRMT_RTC_I2C
285 i2c_register_board_info(0, &mrmt1_i2c_rtc, 1);
286#endif
287
288#ifndef CONFIG_BOARD_MRMT_LCD_DISABLE
289 /* User "alternate" LCDC inferface on Port E & D */
290 /* NB: exclude LCDC_CC pin, as NGW100 reserves it for other use */
291 at32_add_device_lcdc(0, &rmt_lcdc_data,
292 fbmem_start, fbmem_size,
293 (ATMEL_LCDC_ALT_24BIT | ATMEL_LCDC_PE_DVAL ) );
294#endif
295
296#ifdef CONFIG_BOARD_MRMT_AC97
297 at32_add_device_ac97c(0, &ac97c0_data, AC97C_BOTH);
298#endif
299
300#ifdef CONFIG_BOARD_MRMT_ADS7846_TS
301 /* Select the Touchscreen interrupt pin mode */
302 at32_select_periph( GPIO_PIOB_BASE, 1 << (PB_EXTINT_BASE+TS_IRQ),
303 GPIO_PERIPH_A, AT32_GPIOF_DEGLITCH);
304 set_irq_type( AT32_EXTINT(TS_IRQ), IRQ_TYPE_EDGE_FALLING );
305 spi_register_board_info(spi01_board_info,ARRAY_SIZE(spi01_board_info));
306#endif
307
308#ifdef CONFIG_BOARD_MRMT_UCB1400_TS
309 /* Select the Touchscreen interrupt pin mode */
310 at32_select_periph( GPIO_PIOB_BASE, 1 << (PB_EXTINT_BASE+TS_IRQ),
311 GPIO_PERIPH_A, AT32_GPIOF_DEGLITCH);
312 platform_device_register(&rmt_ts_device);
313#endif
314
315 at32_select_gpio( PIN_LCD_DISP, AT32_GPIOF_OUTPUT );
316 gpio_request( PIN_LCD_DISP, "LCD_DISP" );
317 gpio_direction_output( PIN_LCD_DISP, 0 ); /* LCD DISP */
318#ifdef CONFIG_BOARD_MRMT_LCD_DISABLE
319 /* Keep Backlight and DISP off */
320 at32_select_gpio( PIN_LCD_BL, AT32_GPIOF_OUTPUT );
321 gpio_request( PIN_LCD_BL, "LCD_BL" );
322 gpio_direction_output( PIN_LCD_BL, 0 ); /* Backlight */
323#else
324 gpio_set_value( PIN_LCD_DISP, 1 ); /* DISP asserted first */
325#ifdef CONFIG_BOARD_MRMT_BL_PWM
326 /* Use PWM for Backlight controls */
327 at32_add_device_pwm(1 << PWM_CH_BL);
328 platform_device_register(&rmt_pwm_led_dev);
329#else
330 /* Backlight always on */
331 udelay( 1 );
332 at32_select_gpio( PIN_LCD_BL, AT32_GPIOF_OUTPUT );
333 gpio_request( PIN_LCD_BL, "LCD_BL" );
334 gpio_direction_output( PIN_LCD_BL, 1 );
335#endif
336#endif
337
338 /* Make sure BT and Zigbee modules in reset */
339 at32_select_gpio( PIN_BT_RST, AT32_GPIOF_OUTPUT );
340 gpio_request( PIN_BT_RST, "BT_RST" );
341 gpio_direction_output( PIN_BT_RST, 1 );
342 /* BT Module in Reset */
343
344 at32_select_gpio( PIN_ZB_RST_N, AT32_GPIOF_OUTPUT );
345 gpio_request( PIN_ZB_RST_N, "ZB_RST_N" );
346 gpio_direction_output( PIN_ZB_RST_N, 0 );
347 /* XBee Module in Reset */
348
349#ifdef CONFIG_BOARD_MRMT_WIRELESS_ZB
350 udelay( 1000 );
351 /* Unreset the XBee Module */
352 gpio_set_value( PIN_ZB_RST_N, 1 );
353#endif
354#ifdef CONFIG_BOARD_MRMT_WIRELESS_BT
355 udelay( 1000 );
356 /* Unreset the BT Module */
357 gpio_set_value( PIN_BT_RST, 0 );
358#endif
359
360 return 0;
361}
362arch_initcall(mrmt1_init);
363
364static int __init mrmt1_early_init(void)
365{
366 /* To maintain power-on signal in case boot loader did not already */
367 at32_select_gpio( PIN_PWR_ON, AT32_GPIOF_OUTPUT );
368 gpio_request( PIN_PWR_ON, "PIN_PWR_ON" );
369 gpio_direction_output( PIN_PWR_ON, 1 );
370
371 return 0;
372}
373core_initcall(mrmt1_early_init);
diff --git a/arch/avr32/boards/atngw100/setup.c b/arch/avr32/boards/atngw100/setup.c
index 5b022aad4bd9..bc299fbbeb4e 100644
--- a/arch/avr32/boards/atngw100/setup.c
+++ b/arch/avr32/boards/atngw100/setup.c
@@ -56,8 +56,13 @@ static struct spi_board_info spi0_board_info[] __initdata = {
56static struct mci_platform_data __initdata mci0_data = { 56static struct mci_platform_data __initdata mci0_data = {
57 .slot[0] = { 57 .slot[0] = {
58 .bus_width = 4, 58 .bus_width = 4,
59#if defined(CONFIG_BOARD_ATNGW100_EVKLCD10X) || defined(CONFIG_BOARD_ATNGW100_MRMT1)
60 .detect_pin = GPIO_PIN_NONE,
61 .wp_pin = GPIO_PIN_NONE,
62#else
59 .detect_pin = GPIO_PIN_PC(25), 63 .detect_pin = GPIO_PIN_PC(25),
60 .wp_pin = GPIO_PIN_PE(0), 64 .wp_pin = GPIO_PIN_PE(0),
65#endif
61 }, 66 },
62}; 67};
63 68
diff --git a/arch/avr32/boards/merisc/setup.c b/arch/avr32/boards/merisc/setup.c
index 20b300cf105a..623b077594fc 100644
--- a/arch/avr32/boards/merisc/setup.c
+++ b/arch/avr32/boards/merisc/setup.c
@@ -94,9 +94,10 @@ static struct spi_board_info __initdata spi0_board_info[] = {
94 94
95static struct mci_platform_data __initdata mci0_data = { 95static struct mci_platform_data __initdata mci0_data = {
96 .slot[0] = { 96 .slot[0] = {
97 .bus_width = 4, 97 .bus_width = 4,
98 .detect_pin = GPIO_PIN_PE(19), 98 .detect_pin = GPIO_PIN_PE(19),
99 .wp_pin = GPIO_PIN_PE(20), 99 .wp_pin = GPIO_PIN_PE(20),
100 .detect_is_active_high = true,
100 }, 101 },
101}; 102};
102 103
diff --git a/arch/avr32/boards/mimc200/setup.c b/arch/avr32/boards/mimc200/setup.c
index c1b2175b4fea..523d8e183bef 100644
--- a/arch/avr32/boards/mimc200/setup.c
+++ b/arch/avr32/boards/mimc200/setup.c
@@ -43,16 +43,16 @@ unsigned long at32_board_osc_rates[3] = {
43/* Initialized by bootloader-specific startup code. */ 43/* Initialized by bootloader-specific startup code. */
44struct tag *bootloader_tags __initdata; 44struct tag *bootloader_tags __initdata;
45 45
46static struct fb_videomode __initdata tx14d14_modes[] = { 46static struct fb_videomode __initdata pt0434827_modes[] = {
47 { 47 {
48 .name = "640x480 @ 60", 48 .name = "480x272 @ 72",
49 .refresh = 60, 49 .refresh = 72,
50 .xres = 640, .yres = 480, 50 .xres = 480, .yres = 272,
51 .pixclock = KHZ2PICOS(11666), 51 .pixclock = KHZ2PICOS(10000),
52 52
53 .left_margin = 80, .right_margin = 1, 53 .left_margin = 1, .right_margin = 1,
54 .upper_margin = 13, .lower_margin = 2, 54 .upper_margin = 12, .lower_margin = 1,
55 .hsync_len = 64, .vsync_len = 1, 55 .hsync_len = 42, .vsync_len = 1,
56 56
57 .sync = 0, 57 .sync = 0,
58 .vmode = FB_VMODE_NONINTERLACED, 58 .vmode = FB_VMODE_NONINTERLACED,
@@ -60,14 +60,14 @@ static struct fb_videomode __initdata tx14d14_modes[] = {
60}; 60};
61 61
62static struct fb_monspecs __initdata mimc200_default_monspecs = { 62static struct fb_monspecs __initdata mimc200_default_monspecs = {
63 .manufacturer = "HIT", 63 .manufacturer = "PT",
64 .monitor = "TX14D14VM1BAB", 64 .monitor = "PT0434827-A401",
65 .modedb = tx14d14_modes, 65 .modedb = pt0434827_modes,
66 .modedb_len = ARRAY_SIZE(tx14d14_modes), 66 .modedb_len = ARRAY_SIZE(pt0434827_modes),
67 .hfmin = 14820, 67 .hfmin = 14820,
68 .hfmax = 22230, 68 .hfmax = 22230,
69 .vfmin = 60, 69 .vfmin = 60,
70 .vfmax = 73.3, 70 .vfmax = 85,
71 .dclkmax = 25200000, 71 .dclkmax = 25200000,
72}; 72};
73 73
@@ -228,7 +228,8 @@ static int __init mimc200_init(void)
228 i2c_register_board_info(0, i2c_info, ARRAY_SIZE(i2c_info)); 228 i2c_register_board_info(0, i2c_info, ARRAY_SIZE(i2c_info));
229 229
230 at32_add_device_lcdc(0, &mimc200_lcdc_data, 230 at32_add_device_lcdc(0, &mimc200_lcdc_data,
231 fbmem_start, fbmem_size, 1); 231 fbmem_start, fbmem_size,
232 ATMEL_LCDC_CONTROL | ATMEL_LCDC_ALT_CONTROL | ATMEL_LCDC_ALT_24B_DATA);
232 233
233 return 0; 234 return 0;
234} 235}
diff --git a/arch/avr32/configs/atngw100_mrmt_defconfig b/arch/avr32/configs/atngw100_mrmt_defconfig
new file mode 100644
index 000000000000..17b030777d36
--- /dev/null
+++ b/arch/avr32/configs/atngw100_mrmt_defconfig
@@ -0,0 +1,1363 @@
1#
2# Automatically generated make config: don't edit
3# Linux kernel version: 2.6.30-rc1
4# Wed Jun 3 00:24:53 2009
5#
6CONFIG_AVR32=y
7CONFIG_GENERIC_GPIO=y
8CONFIG_GENERIC_HARDIRQS=y
9CONFIG_STACKTRACE_SUPPORT=y
10CONFIG_LOCKDEP_SUPPORT=y
11CONFIG_TRACE_IRQFLAGS_SUPPORT=y
12CONFIG_HARDIRQS_SW_RESEND=y
13CONFIG_GENERIC_IRQ_PROBE=y
14CONFIG_RWSEM_GENERIC_SPINLOCK=y
15CONFIG_GENERIC_TIME=y
16CONFIG_GENERIC_CLOCKEVENTS=y
17# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
18# CONFIG_ARCH_HAS_ILOG2_U32 is not set
19# CONFIG_ARCH_HAS_ILOG2_U64 is not set
20CONFIG_GENERIC_HWEIGHT=y
21CONFIG_GENERIC_CALIBRATE_DELAY=y
22CONFIG_GENERIC_BUG=y
23CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
24
25#
26# General setup
27#
28CONFIG_EXPERIMENTAL=y
29CONFIG_BROKEN_ON_SMP=y
30CONFIG_INIT_ENV_ARG_LIMIT=32
31CONFIG_LOCALVERSION=""
32# CONFIG_LOCALVERSION_AUTO is not set
33CONFIG_SWAP=y
34CONFIG_SYSVIPC=y
35CONFIG_SYSVIPC_SYSCTL=y
36CONFIG_POSIX_MQUEUE=y
37CONFIG_POSIX_MQUEUE_SYSCTL=y
38CONFIG_BSD_PROCESS_ACCT=y
39CONFIG_BSD_PROCESS_ACCT_V3=y
40# CONFIG_TASKSTATS is not set
41# CONFIG_AUDIT is not set
42
43#
44# RCU Subsystem
45#
46CONFIG_CLASSIC_RCU=y
47# CONFIG_TREE_RCU is not set
48# CONFIG_PREEMPT_RCU is not set
49# CONFIG_TREE_RCU_TRACE is not set
50# CONFIG_PREEMPT_RCU_TRACE is not set
51# CONFIG_IKCONFIG is not set
52CONFIG_LOG_BUF_SHIFT=14
53CONFIG_GROUP_SCHED=y
54CONFIG_FAIR_GROUP_SCHED=y
55# CONFIG_RT_GROUP_SCHED is not set
56CONFIG_USER_SCHED=y
57# CONFIG_CGROUP_SCHED is not set
58# CONFIG_CGROUPS is not set
59CONFIG_SYSFS_DEPRECATED=y
60CONFIG_SYSFS_DEPRECATED_V2=y
61# CONFIG_RELAY is not set
62# CONFIG_NAMESPACES is not set
63CONFIG_BLK_DEV_INITRD=y
64CONFIG_INITRAMFS_SOURCE=""
65CONFIG_RD_GZIP=y
66# CONFIG_RD_BZIP2 is not set
67# CONFIG_RD_LZMA is not set
68CONFIG_CC_OPTIMIZE_FOR_SIZE=y
69CONFIG_SYSCTL=y
70CONFIG_ANON_INODES=y
71CONFIG_EMBEDDED=y
72# CONFIG_SYSCTL_SYSCALL is not set
73CONFIG_KALLSYMS=y
74# CONFIG_KALLSYMS_ALL is not set
75# CONFIG_KALLSYMS_EXTRA_PASS is not set
76CONFIG_HOTPLUG=y
77CONFIG_PRINTK=y
78CONFIG_BUG=y
79CONFIG_ELF_CORE=y
80# CONFIG_BASE_FULL is not set
81CONFIG_FUTEX=y
82CONFIG_EPOLL=y
83CONFIG_SIGNALFD=y
84CONFIG_TIMERFD=y
85CONFIG_EVENTFD=y
86CONFIG_SHMEM=y
87CONFIG_AIO=y
88CONFIG_VM_EVENT_COUNTERS=y
89# CONFIG_SLUB_DEBUG is not set
90CONFIG_COMPAT_BRK=y
91# CONFIG_SLAB is not set
92CONFIG_SLUB=y
93# CONFIG_SLOB is not set
94# CONFIG_PROFILING is not set
95# CONFIG_MARKERS is not set
96CONFIG_HAVE_OPROFILE=y
97# CONFIG_KPROBES is not set
98CONFIG_HAVE_KPROBES=y
99CONFIG_HAVE_CLK=y
100# CONFIG_SLOW_WORK is not set
101# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
102CONFIG_RT_MUTEXES=y
103CONFIG_BASE_SMALL=1
104CONFIG_MODULES=y
105# CONFIG_MODULE_FORCE_LOAD is not set
106CONFIG_MODULE_UNLOAD=y
107CONFIG_MODULE_FORCE_UNLOAD=y
108# CONFIG_MODVERSIONS is not set
109# CONFIG_MODULE_SRCVERSION_ALL is not set
110CONFIG_BLOCK=y
111# CONFIG_LBD is not set
112# CONFIG_BLK_DEV_BSG is not set
113# CONFIG_BLK_DEV_INTEGRITY is not set
114
115#
116# IO Schedulers
117#
118CONFIG_IOSCHED_NOOP=y
119# CONFIG_IOSCHED_AS is not set
120# CONFIG_IOSCHED_DEADLINE is not set
121CONFIG_IOSCHED_CFQ=y
122# CONFIG_DEFAULT_AS is not set
123# CONFIG_DEFAULT_DEADLINE is not set
124CONFIG_DEFAULT_CFQ=y
125# CONFIG_DEFAULT_NOOP is not set
126CONFIG_DEFAULT_IOSCHED="cfq"
127# CONFIG_FREEZER is not set
128
129#
130# System Type and features
131#
132# CONFIG_NO_HZ is not set
133# CONFIG_HIGH_RES_TIMERS is not set
134CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
135CONFIG_SUBARCH_AVR32B=y
136CONFIG_MMU=y
137CONFIG_PERFORMANCE_COUNTERS=y
138CONFIG_PLATFORM_AT32AP=y
139CONFIG_CPU_AT32AP700X=y
140CONFIG_CPU_AT32AP7000=y
141# CONFIG_BOARD_ATSTK1000 is not set
142CONFIG_BOARD_ATNGW100=y
143# CONFIG_BOARD_HAMMERHEAD is not set
144# CONFIG_BOARD_FAVR_32 is not set
145# CONFIG_BOARD_MERISC is not set
146# CONFIG_BOARD_MIMC200 is not set
147# CONFIG_BOARD_ATNGW100_ADDON_NONE is not set
148# CONFIG_BOARD_ATNGW100_EVKLCD10X is not set
149CONFIG_BOARD_ATNGW100_MRMT=y
150CONFIG_BOARD_MRMT_REV1=y
151# CONFIG_BOARD_MRMT_REV2 is not set
152CONFIG_BOARD_MRMT_AC97=y
153# CONFIG_BOARD_MRMT_UCB1400_TS is not set
154CONFIG_BOARD_MRMT_ADS7846_TS=y
155# CONFIG_BOARD_MRMT_LCD_DISABLE is not set
156CONFIG_BOARD_MRMT_LCD_LQ043T3DX0X=y
157# CONFIG_BOARD_MRMT_LCD_KWH043GM08 is not set
158CONFIG_BOARD_MRMT_BL_PWM=y
159CONFIG_BOARD_MRMT_RTC_I2C=y
160CONFIG_BOARD_MRMT_WIRELESS_ZB=y
161# CONFIG_BOARD_MRMT_WIRELESS_BT is not set
162# CONFIG_BOARD_MRMT_WIRELESS_NONE is not set
163CONFIG_LOADER_U_BOOT=y
164
165#
166# Atmel AVR32 AP options
167#
168# CONFIG_AP700X_32_BIT_SMC is not set
169CONFIG_AP700X_16_BIT_SMC=y
170# CONFIG_AP700X_8_BIT_SMC is not set
171CONFIG_LOAD_ADDRESS=0x10000000
172CONFIG_ENTRY_ADDRESS=0x90000000
173CONFIG_PHYS_OFFSET=0x10000000
174CONFIG_PREEMPT_NONE=y
175# CONFIG_PREEMPT_VOLUNTARY is not set
176# CONFIG_PREEMPT is not set
177CONFIG_QUICKLIST=y
178# CONFIG_HAVE_ARCH_BOOTMEM is not set
179# CONFIG_ARCH_HAVE_MEMORY_PRESENT is not set
180# CONFIG_NEED_NODE_MEMMAP_SIZE is not set
181CONFIG_ARCH_FLATMEM_ENABLE=y
182# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
183# CONFIG_ARCH_SPARSEMEM_ENABLE is not set
184CONFIG_SELECT_MEMORY_MODEL=y
185CONFIG_FLATMEM_MANUAL=y
186# CONFIG_DISCONTIGMEM_MANUAL is not set
187# CONFIG_SPARSEMEM_MANUAL is not set
188CONFIG_FLATMEM=y
189CONFIG_FLAT_NODE_MEM_MAP=y
190CONFIG_PAGEFLAGS_EXTENDED=y
191CONFIG_SPLIT_PTLOCK_CPUS=4
192# CONFIG_PHYS_ADDR_T_64BIT is not set
193CONFIG_ZONE_DMA_FLAG=0
194CONFIG_NR_QUICK=2
195CONFIG_VIRT_TO_BUS=y
196CONFIG_UNEVICTABLE_LRU=y
197CONFIG_HAVE_MLOCK=y
198CONFIG_HAVE_MLOCKED_PAGE_BIT=y
199# CONFIG_OWNERSHIP_TRACE is not set
200# CONFIG_NMI_DEBUGGING is not set
201# CONFIG_HZ_100 is not set
202CONFIG_HZ_250=y
203# CONFIG_HZ_300 is not set
204# CONFIG_HZ_1000 is not set
205CONFIG_HZ=250
206# CONFIG_SCHED_HRTICK is not set
207CONFIG_CMDLINE=""
208
209#
210# Power management options
211#
212CONFIG_PM=y
213# CONFIG_PM_DEBUG is not set
214# CONFIG_SUSPEND is not set
215CONFIG_ARCH_SUSPEND_POSSIBLE=y
216
217#
218# CPU Frequency scaling
219#
220CONFIG_CPU_FREQ=y
221CONFIG_CPU_FREQ_TABLE=y
222# CONFIG_CPU_FREQ_DEBUG is not set
223CONFIG_CPU_FREQ_STAT=y
224# CONFIG_CPU_FREQ_STAT_DETAILS is not set
225CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
226# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
227# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
228# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
229# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
230CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
231CONFIG_CPU_FREQ_GOV_POWERSAVE=y
232CONFIG_CPU_FREQ_GOV_USERSPACE=y
233CONFIG_CPU_FREQ_GOV_ONDEMAND=y
234# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
235CONFIG_CPU_FREQ_AT32AP=y
236
237#
238# Bus options
239#
240# CONFIG_ARCH_SUPPORTS_MSI is not set
241# CONFIG_PCCARD is not set
242
243#
244# Executable file formats
245#
246CONFIG_BINFMT_ELF=y
247# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
248# CONFIG_HAVE_AOUT is not set
249# CONFIG_BINFMT_MISC is not set
250CONFIG_NET=y
251
252#
253# Networking options
254#
255CONFIG_PACKET=y
256CONFIG_PACKET_MMAP=y
257CONFIG_UNIX=y
258# CONFIG_NET_KEY is not set
259CONFIG_INET=y
260# CONFIG_IP_MULTICAST is not set
261# CONFIG_IP_ADVANCED_ROUTER is not set
262CONFIG_IP_FIB_HASH=y
263CONFIG_IP_PNP=y
264CONFIG_IP_PNP_DHCP=y
265# CONFIG_IP_PNP_BOOTP is not set
266# CONFIG_IP_PNP_RARP is not set
267# CONFIG_NET_IPIP is not set
268# CONFIG_NET_IPGRE is not set
269# CONFIG_ARPD is not set
270CONFIG_SYN_COOKIES=y
271# CONFIG_INET_AH is not set
272# CONFIG_INET_ESP is not set
273# CONFIG_INET_IPCOMP is not set
274# CONFIG_INET_XFRM_TUNNEL is not set
275# CONFIG_INET_TUNNEL is not set
276# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
277# CONFIG_INET_XFRM_MODE_TUNNEL is not set
278# CONFIG_INET_XFRM_MODE_BEET is not set
279# CONFIG_INET_LRO is not set
280CONFIG_INET_DIAG=y
281CONFIG_INET_TCP_DIAG=y
282# CONFIG_TCP_CONG_ADVANCED is not set
283CONFIG_TCP_CONG_CUBIC=y
284CONFIG_DEFAULT_TCP_CONG="cubic"
285# CONFIG_TCP_MD5SIG is not set
286# CONFIG_IPV6 is not set
287# CONFIG_NETWORK_SECMARK is not set
288# CONFIG_NETFILTER is not set
289# CONFIG_IP_DCCP is not set
290# CONFIG_IP_SCTP is not set
291# CONFIG_TIPC is not set
292# CONFIG_ATM is not set
293# CONFIG_BRIDGE is not set
294# CONFIG_NET_DSA is not set
295# CONFIG_VLAN_8021Q is not set
296# CONFIG_DECNET is not set
297# CONFIG_LLC2 is not set
298# CONFIG_IPX is not set
299# CONFIG_ATALK is not set
300# CONFIG_X25 is not set
301# CONFIG_LAPB is not set
302# CONFIG_ECONET is not set
303# CONFIG_WAN_ROUTER is not set
304# CONFIG_PHONET is not set
305# CONFIG_NET_SCHED is not set
306# CONFIG_DCB is not set
307
308#
309# Network testing
310#
311# CONFIG_NET_PKTGEN is not set
312# CONFIG_HAMRADIO is not set
313# CONFIG_CAN is not set
314# CONFIG_IRDA is not set
315CONFIG_BT=m
316CONFIG_BT_L2CAP=m
317# CONFIG_BT_SCO is not set
318CONFIG_BT_RFCOMM=m
319CONFIG_BT_RFCOMM_TTY=y
320# CONFIG_BT_BNEP is not set
321CONFIG_BT_HIDP=m
322
323#
324# Bluetooth device drivers
325#
326# CONFIG_BT_HCIBTSDIO is not set
327CONFIG_BT_HCIUART=m
328CONFIG_BT_HCIUART_H4=y
329CONFIG_BT_HCIUART_BCSP=y
330# CONFIG_BT_HCIUART_LL is not set
331# CONFIG_BT_HCIVHCI is not set
332# CONFIG_AF_RXRPC is not set
333# CONFIG_WIRELESS is not set
334# CONFIG_WIMAX is not set
335# CONFIG_RFKILL is not set
336# CONFIG_NET_9P is not set
337
338#
339# Device Drivers
340#
341
342#
343# Generic Driver Options
344#
345CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
346CONFIG_STANDALONE=y
347# CONFIG_PREVENT_FIRMWARE_BUILD is not set
348# CONFIG_FW_LOADER is not set
349# CONFIG_DEBUG_DRIVER is not set
350# CONFIG_DEBUG_DEVRES is not set
351# CONFIG_SYS_HYPERVISOR is not set
352# CONFIG_CONNECTOR is not set
353CONFIG_MTD=y
354# CONFIG_MTD_DEBUG is not set
355# CONFIG_MTD_CONCAT is not set
356CONFIG_MTD_PARTITIONS=y
357# CONFIG_MTD_TESTS is not set
358# CONFIG_MTD_REDBOOT_PARTS is not set
359CONFIG_MTD_CMDLINE_PARTS=y
360# CONFIG_MTD_AR7_PARTS is not set
361
362#
363# User Modules And Translation Layers
364#
365CONFIG_MTD_CHAR=y
366CONFIG_MTD_BLKDEVS=y
367CONFIG_MTD_BLOCK=y
368# CONFIG_FTL is not set
369# CONFIG_NFTL is not set
370# CONFIG_INFTL is not set
371# CONFIG_RFD_FTL is not set
372# CONFIG_SSFDC is not set
373# CONFIG_MTD_OOPS is not set
374
375#
376# RAM/ROM/Flash chip drivers
377#
378CONFIG_MTD_CFI=y
379# CONFIG_MTD_JEDECPROBE is not set
380CONFIG_MTD_GEN_PROBE=y
381# CONFIG_MTD_CFI_ADV_OPTIONS is not set
382CONFIG_MTD_MAP_BANK_WIDTH_1=y
383CONFIG_MTD_MAP_BANK_WIDTH_2=y
384CONFIG_MTD_MAP_BANK_WIDTH_4=y
385# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
386# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
387# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
388CONFIG_MTD_CFI_I1=y
389CONFIG_MTD_CFI_I2=y
390# CONFIG_MTD_CFI_I4 is not set
391# CONFIG_MTD_CFI_I8 is not set
392# CONFIG_MTD_CFI_INTELEXT is not set
393CONFIG_MTD_CFI_AMDSTD=y
394# CONFIG_MTD_CFI_STAA is not set
395CONFIG_MTD_CFI_UTIL=y
396# CONFIG_MTD_RAM is not set
397# CONFIG_MTD_ROM is not set
398# CONFIG_MTD_ABSENT is not set
399
400#
401# Mapping drivers for chip access
402#
403# CONFIG_MTD_COMPLEX_MAPPINGS is not set
404CONFIG_MTD_PHYSMAP=y
405# CONFIG_MTD_PHYSMAP_COMPAT is not set
406# CONFIG_MTD_PLATRAM is not set
407
408#
409# Self-contained MTD device drivers
410#
411CONFIG_MTD_DATAFLASH=y
412# CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set
413# CONFIG_MTD_DATAFLASH_OTP is not set
414# CONFIG_MTD_M25P80 is not set
415# CONFIG_MTD_SLRAM is not set
416# CONFIG_MTD_PHRAM is not set
417# CONFIG_MTD_MTDRAM is not set
418# CONFIG_MTD_BLOCK2MTD is not set
419
420#
421# Disk-On-Chip Device Drivers
422#
423# CONFIG_MTD_DOC2000 is not set
424# CONFIG_MTD_DOC2001 is not set
425# CONFIG_MTD_DOC2001PLUS is not set
426# CONFIG_MTD_NAND is not set
427# CONFIG_MTD_ONENAND is not set
428
429#
430# LPDDR flash memory drivers
431#
432# CONFIG_MTD_LPDDR is not set
433
434#
435# UBI - Unsorted block images
436#
437# CONFIG_MTD_UBI is not set
438# CONFIG_PARPORT is not set
439CONFIG_BLK_DEV=y
440# CONFIG_BLK_DEV_COW_COMMON is not set
441CONFIG_BLK_DEV_LOOP=y
442# CONFIG_BLK_DEV_CRYPTOLOOP is not set
443# CONFIG_BLK_DEV_NBD is not set
444# CONFIG_BLK_DEV_RAM is not set
445# CONFIG_CDROM_PKTCDVD is not set
446# CONFIG_ATA_OVER_ETH is not set
447CONFIG_MISC_DEVICES=y
448CONFIG_ATMEL_PWM=y
449# CONFIG_ATMEL_TCLIB is not set
450# CONFIG_ICS932S401 is not set
451# CONFIG_ATMEL_SSC is not set
452# CONFIG_ENCLOSURE_SERVICES is not set
453# CONFIG_ISL29003 is not set
454# CONFIG_C2PORT is not set
455
456#
457# EEPROM support
458#
459# CONFIG_EEPROM_AT24 is not set
460# CONFIG_EEPROM_AT25 is not set
461# CONFIG_EEPROM_LEGACY is not set
462# CONFIG_EEPROM_93CX6 is not set
463
464#
465# SCSI device support
466#
467# CONFIG_RAID_ATTRS is not set
468# CONFIG_SCSI is not set
469# CONFIG_SCSI_DMA is not set
470# CONFIG_SCSI_NETLINK is not set
471# CONFIG_ATA is not set
472# CONFIG_MD is not set
473CONFIG_NETDEVICES=y
474CONFIG_COMPAT_NET_DEV_OPS=y
475# CONFIG_DUMMY is not set
476# CONFIG_BONDING is not set
477# CONFIG_MACVLAN is not set
478# CONFIG_EQUALIZER is not set
479# CONFIG_TUN is not set
480# CONFIG_VETH is not set
481CONFIG_PHYLIB=y
482
483#
484# MII PHY device drivers
485#
486# CONFIG_MARVELL_PHY is not set
487# CONFIG_DAVICOM_PHY is not set
488# CONFIG_QSEMI_PHY is not set
489# CONFIG_LXT_PHY is not set
490# CONFIG_CICADA_PHY is not set
491# CONFIG_VITESSE_PHY is not set
492# CONFIG_SMSC_PHY is not set
493# CONFIG_BROADCOM_PHY is not set
494# CONFIG_ICPLUS_PHY is not set
495# CONFIG_REALTEK_PHY is not set
496# CONFIG_NATIONAL_PHY is not set
497# CONFIG_STE10XP is not set
498# CONFIG_LSI_ET1011C_PHY is not set
499# CONFIG_FIXED_PHY is not set
500# CONFIG_MDIO_BITBANG is not set
501CONFIG_NET_ETHERNET=y
502# CONFIG_MII is not set
503CONFIG_MACB=y
504# CONFIG_ENC28J60 is not set
505# CONFIG_ETHOC is not set
506# CONFIG_DNET is not set
507# CONFIG_IBM_NEW_EMAC_ZMII is not set
508# CONFIG_IBM_NEW_EMAC_RGMII is not set
509# CONFIG_IBM_NEW_EMAC_TAH is not set
510# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
511# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
512# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
513# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
514# CONFIG_B44 is not set
515# CONFIG_NETDEV_1000 is not set
516# CONFIG_NETDEV_10000 is not set
517
518#
519# Wireless LAN
520#
521# CONFIG_WLAN_PRE80211 is not set
522# CONFIG_WLAN_80211 is not set
523
524#
525# Enable WiMAX (Networking options) to see the WiMAX drivers
526#
527# CONFIG_WAN is not set
528# CONFIG_PPP is not set
529# CONFIG_SLIP is not set
530# CONFIG_NETCONSOLE is not set
531# CONFIG_NETPOLL is not set
532# CONFIG_NET_POLL_CONTROLLER is not set
533# CONFIG_ISDN is not set
534# CONFIG_PHONE is not set
535
536#
537# Input device support
538#
539CONFIG_INPUT=y
540# CONFIG_INPUT_FF_MEMLESS is not set
541# CONFIG_INPUT_POLLDEV is not set
542
543#
544# Userland interfaces
545#
546# CONFIG_INPUT_MOUSEDEV is not set
547# CONFIG_INPUT_JOYDEV is not set
548CONFIG_INPUT_EVDEV=y
549# CONFIG_INPUT_EVBUG is not set
550
551#
552# Input Device Drivers
553#
554CONFIG_INPUT_KEYBOARD=y
555# CONFIG_KEYBOARD_ATKBD is not set
556# CONFIG_KEYBOARD_SUNKBD is not set
557# CONFIG_KEYBOARD_LKKBD is not set
558# CONFIG_KEYBOARD_XTKBD is not set
559# CONFIG_KEYBOARD_NEWTON is not set
560# CONFIG_KEYBOARD_STOWAWAY is not set
561CONFIG_KEYBOARD_GPIO=y
562# CONFIG_INPUT_MOUSE is not set
563# CONFIG_INPUT_JOYSTICK is not set
564# CONFIG_INPUT_TABLET is not set
565CONFIG_INPUT_TOUCHSCREEN=y
566CONFIG_TOUCHSCREEN_ADS7846=m
567# CONFIG_TOUCHSCREEN_FUJITSU is not set
568# CONFIG_TOUCHSCREEN_GUNZE is not set
569# CONFIG_TOUCHSCREEN_ELO is not set
570# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
571# CONFIG_TOUCHSCREEN_MTOUCH is not set
572# CONFIG_TOUCHSCREEN_INEXIO is not set
573# CONFIG_TOUCHSCREEN_MK712 is not set
574# CONFIG_TOUCHSCREEN_PENMOUNT is not set
575# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
576# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
577# CONFIG_TOUCHSCREEN_WM97XX is not set
578# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
579# CONFIG_TOUCHSCREEN_TSC2007 is not set
580# CONFIG_INPUT_MISC is not set
581
582#
583# Hardware I/O ports
584#
585# CONFIG_SERIO is not set
586# CONFIG_GAMEPORT is not set
587
588#
589# Character devices
590#
591CONFIG_VT=y
592CONFIG_CONSOLE_TRANSLATIONS=y
593CONFIG_VT_CONSOLE=y
594CONFIG_HW_CONSOLE=y
595CONFIG_VT_HW_CONSOLE_BINDING=y
596CONFIG_DEVKMEM=y
597# CONFIG_SERIAL_NONSTANDARD is not set
598
599#
600# Serial drivers
601#
602# CONFIG_SERIAL_8250 is not set
603
604#
605# Non-8250 serial port support
606#
607CONFIG_SERIAL_ATMEL=y
608CONFIG_SERIAL_ATMEL_CONSOLE=y
609CONFIG_SERIAL_ATMEL_PDC=y
610# CONFIG_SERIAL_ATMEL_TTYAT is not set
611# CONFIG_SERIAL_MAX3100 is not set
612CONFIG_SERIAL_CORE=y
613CONFIG_SERIAL_CORE_CONSOLE=y
614CONFIG_UNIX98_PTYS=y
615# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
616# CONFIG_LEGACY_PTYS is not set
617# CONFIG_IPMI_HANDLER is not set
618# CONFIG_HW_RANDOM is not set
619# CONFIG_R3964 is not set
620# CONFIG_RAW_DRIVER is not set
621# CONFIG_TCG_TPM is not set
622CONFIG_I2C=y
623CONFIG_I2C_BOARDINFO=y
624CONFIG_I2C_CHARDEV=y
625CONFIG_I2C_HELPER_AUTO=y
626CONFIG_I2C_ALGOBIT=y
627
628#
629# I2C Hardware Bus support
630#
631
632#
633# I2C system bus drivers (mostly embedded / system-on-chip)
634#
635CONFIG_I2C_GPIO=y
636# CONFIG_I2C_OCORES is not set
637# CONFIG_I2C_SIMTEC is not set
638
639#
640# External I2C/SMBus adapter drivers
641#
642# CONFIG_I2C_PARPORT_LIGHT is not set
643# CONFIG_I2C_TAOS_EVM is not set
644
645#
646# Other I2C/SMBus bus drivers
647#
648# CONFIG_I2C_PCA_PLATFORM is not set
649# CONFIG_I2C_STUB is not set
650
651#
652# Miscellaneous I2C Chip support
653#
654# CONFIG_DS1682 is not set
655# CONFIG_SENSORS_PCF8574 is not set
656# CONFIG_PCF8575 is not set
657# CONFIG_SENSORS_PCA9539 is not set
658# CONFIG_SENSORS_MAX6875 is not set
659# CONFIG_SENSORS_TSL2550 is not set
660# CONFIG_I2C_DEBUG_CORE is not set
661# CONFIG_I2C_DEBUG_ALGO is not set
662# CONFIG_I2C_DEBUG_BUS is not set
663# CONFIG_I2C_DEBUG_CHIP is not set
664CONFIG_SPI=y
665# CONFIG_SPI_DEBUG is not set
666CONFIG_SPI_MASTER=y
667
668#
669# SPI Master Controller Drivers
670#
671CONFIG_SPI_ATMEL=y
672# CONFIG_SPI_BITBANG is not set
673# CONFIG_SPI_GPIO is not set
674
675#
676# SPI Protocol Masters
677#
678CONFIG_SPI_SPIDEV=y
679# CONFIG_SPI_TLE62X0 is not set
680CONFIG_ARCH_REQUIRE_GPIOLIB=y
681CONFIG_GPIOLIB=y
682# CONFIG_DEBUG_GPIO is not set
683# CONFIG_GPIO_SYSFS is not set
684
685#
686# Memory mapped GPIO expanders:
687#
688
689#
690# I2C GPIO expanders:
691#
692# CONFIG_GPIO_MAX732X is not set
693# CONFIG_GPIO_PCA953X is not set
694# CONFIG_GPIO_PCF857X is not set
695
696#
697# PCI GPIO expanders:
698#
699
700#
701# SPI GPIO expanders:
702#
703# CONFIG_GPIO_MAX7301 is not set
704# CONFIG_GPIO_MCP23S08 is not set
705# CONFIG_W1 is not set
706# CONFIG_POWER_SUPPLY is not set
707CONFIG_HWMON=y
708# CONFIG_HWMON_VID is not set
709# CONFIG_SENSORS_AD7414 is not set
710# CONFIG_SENSORS_AD7418 is not set
711# CONFIG_SENSORS_ADCXX is not set
712# CONFIG_SENSORS_ADM1021 is not set
713# CONFIG_SENSORS_ADM1025 is not set
714# CONFIG_SENSORS_ADM1026 is not set
715# CONFIG_SENSORS_ADM1029 is not set
716# CONFIG_SENSORS_ADM1031 is not set
717# CONFIG_SENSORS_ADM9240 is not set
718# CONFIG_SENSORS_ADT7462 is not set
719# CONFIG_SENSORS_ADT7470 is not set
720# CONFIG_SENSORS_ADT7473 is not set
721# CONFIG_SENSORS_ADT7475 is not set
722# CONFIG_SENSORS_ATXP1 is not set
723# CONFIG_SENSORS_DS1621 is not set
724# CONFIG_SENSORS_F71805F is not set
725# CONFIG_SENSORS_F71882FG is not set
726# CONFIG_SENSORS_F75375S is not set
727# CONFIG_SENSORS_G760A is not set
728# CONFIG_SENSORS_GL518SM is not set
729# CONFIG_SENSORS_GL520SM is not set
730# CONFIG_SENSORS_IT87 is not set
731# CONFIG_SENSORS_LM63 is not set
732# CONFIG_SENSORS_LM70 is not set
733# CONFIG_SENSORS_LM75 is not set
734# CONFIG_SENSORS_LM77 is not set
735# CONFIG_SENSORS_LM78 is not set
736# CONFIG_SENSORS_LM80 is not set
737# CONFIG_SENSORS_LM83 is not set
738# CONFIG_SENSORS_LM85 is not set
739# CONFIG_SENSORS_LM87 is not set
740# CONFIG_SENSORS_LM90 is not set
741# CONFIG_SENSORS_LM92 is not set
742# CONFIG_SENSORS_LM93 is not set
743# CONFIG_SENSORS_LTC4215 is not set
744# CONFIG_SENSORS_LTC4245 is not set
745# CONFIG_SENSORS_LM95241 is not set
746# CONFIG_SENSORS_MAX1111 is not set
747# CONFIG_SENSORS_MAX1619 is not set
748# CONFIG_SENSORS_MAX6650 is not set
749# CONFIG_SENSORS_PC87360 is not set
750# CONFIG_SENSORS_PC87427 is not set
751# CONFIG_SENSORS_PCF8591 is not set
752# CONFIG_SENSORS_DME1737 is not set
753# CONFIG_SENSORS_SMSC47M1 is not set
754# CONFIG_SENSORS_SMSC47M192 is not set
755# CONFIG_SENSORS_SMSC47B397 is not set
756# CONFIG_SENSORS_ADS7828 is not set
757# CONFIG_SENSORS_THMC50 is not set
758# CONFIG_SENSORS_VT1211 is not set
759# CONFIG_SENSORS_W83781D is not set
760# CONFIG_SENSORS_W83791D is not set
761# CONFIG_SENSORS_W83792D is not set
762# CONFIG_SENSORS_W83793 is not set
763# CONFIG_SENSORS_W83L785TS is not set
764# CONFIG_SENSORS_W83L786NG is not set
765# CONFIG_SENSORS_W83627HF is not set
766# CONFIG_SENSORS_W83627EHF is not set
767# CONFIG_SENSORS_LIS3_SPI is not set
768# CONFIG_HWMON_DEBUG_CHIP is not set
769# CONFIG_THERMAL is not set
770# CONFIG_THERMAL_HWMON is not set
771CONFIG_WATCHDOG=y
772# CONFIG_WATCHDOG_NOWAYOUT is not set
773
774#
775# Watchdog Device Drivers
776#
777# CONFIG_SOFT_WATCHDOG is not set
778CONFIG_AT32AP700X_WDT=y
779CONFIG_SSB_POSSIBLE=y
780
781#
782# Sonics Silicon Backplane
783#
784# CONFIG_SSB is not set
785
786#
787# Multifunction device drivers
788#
789# CONFIG_MFD_CORE is not set
790# CONFIG_MFD_SM501 is not set
791# CONFIG_HTC_PASIC3 is not set
792# CONFIG_UCB1400_CORE is not set
793# CONFIG_TPS65010 is not set
794# CONFIG_TWL4030_CORE is not set
795# CONFIG_MFD_TMIO is not set
796# CONFIG_PMIC_DA903X is not set
797# CONFIG_MFD_WM8400 is not set
798# CONFIG_MFD_WM8350_I2C is not set
799# CONFIG_MFD_PCF50633 is not set
800# CONFIG_REGULATOR is not set
801
802#
803# Multimedia devices
804#
805
806#
807# Multimedia core support
808#
809# CONFIG_VIDEO_DEV is not set
810# CONFIG_DVB_CORE is not set
811# CONFIG_VIDEO_MEDIA is not set
812
813#
814# Multimedia drivers
815#
816# CONFIG_DAB is not set
817
818#
819# Graphics support
820#
821# CONFIG_VGASTATE is not set
822# CONFIG_VIDEO_OUTPUT_CONTROL is not set
823CONFIG_FB=y
824# CONFIG_FIRMWARE_EDID is not set
825# CONFIG_FB_DDC is not set
826# CONFIG_FB_BOOT_VESA_SUPPORT is not set
827CONFIG_FB_CFB_FILLRECT=y
828CONFIG_FB_CFB_COPYAREA=y
829CONFIG_FB_CFB_IMAGEBLIT=y
830# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
831# CONFIG_FB_SYS_FILLRECT is not set
832# CONFIG_FB_SYS_COPYAREA is not set
833# CONFIG_FB_SYS_IMAGEBLIT is not set
834# CONFIG_FB_FOREIGN_ENDIAN is not set
835# CONFIG_FB_SYS_FOPS is not set
836# CONFIG_FB_SVGALIB is not set
837# CONFIG_FB_MACMODES is not set
838# CONFIG_FB_BACKLIGHT is not set
839# CONFIG_FB_MODE_HELPERS is not set
840# CONFIG_FB_TILEBLITTING is not set
841
842#
843# Frame buffer hardware drivers
844#
845# CONFIG_FB_S1D13XXX is not set
846CONFIG_FB_ATMEL=y
847# CONFIG_FB_VIRTUAL is not set
848# CONFIG_FB_METRONOME is not set
849# CONFIG_FB_MB862XX is not set
850# CONFIG_FB_BROADSHEET is not set
851CONFIG_BACKLIGHT_LCD_SUPPORT=y
852CONFIG_LCD_CLASS_DEVICE=y
853# CONFIG_LCD_LTV350QV is not set
854# CONFIG_LCD_ILI9320 is not set
855# CONFIG_LCD_TDO24M is not set
856# CONFIG_LCD_VGG2432A4 is not set
857# CONFIG_LCD_PLATFORM is not set
858CONFIG_BACKLIGHT_CLASS_DEVICE=y
859# CONFIG_BACKLIGHT_ATMEL_LCDC is not set
860# CONFIG_BACKLIGHT_ATMEL_PWM is not set
861CONFIG_BACKLIGHT_GENERIC=y
862
863#
864# Display device support
865#
866# CONFIG_DISPLAY_SUPPORT is not set
867
868#
869# Console display driver support
870#
871CONFIG_DUMMY_CONSOLE=y
872# CONFIG_FRAMEBUFFER_CONSOLE is not set
873# CONFIG_LOGO is not set
874CONFIG_SOUND=m
875CONFIG_SOUND_OSS_CORE=y
876CONFIG_SND=m
877CONFIG_SND_TIMER=m
878CONFIG_SND_PCM=m
879# CONFIG_SND_SEQUENCER is not set
880CONFIG_SND_OSSEMUL=y
881CONFIG_SND_MIXER_OSS=m
882CONFIG_SND_PCM_OSS=m
883CONFIG_SND_PCM_OSS_PLUGINS=y
884# CONFIG_SND_DYNAMIC_MINORS is not set
885# CONFIG_SND_SUPPORT_OLD_API is not set
886# CONFIG_SND_VERBOSE_PROCFS is not set
887# CONFIG_SND_VERBOSE_PRINTK is not set
888# CONFIG_SND_DEBUG is not set
889CONFIG_SND_VMASTER=y
890CONFIG_SND_AC97_CODEC=m
891CONFIG_SND_DRIVERS=y
892# CONFIG_SND_DUMMY is not set
893# CONFIG_SND_MTPAV is not set
894# CONFIG_SND_SERIAL_U16550 is not set
895# CONFIG_SND_MPU401 is not set
896# CONFIG_SND_AC97_POWER_SAVE is not set
897
898#
899# Atmel devices (AVR32 and AT91)
900#
901# CONFIG_SND_ATMEL_ABDAC is not set
902CONFIG_SND_ATMEL_AC97C=m
903# CONFIG_SND_SPI is not set
904# CONFIG_SND_SOC is not set
905# CONFIG_SOUND_PRIME is not set
906CONFIG_AC97_BUS=m
907CONFIG_HID_SUPPORT=y
908CONFIG_HID=y
909# CONFIG_HID_DEBUG is not set
910# CONFIG_HIDRAW is not set
911# CONFIG_HID_PID is not set
912
913#
914# Special HID drivers
915#
916# CONFIG_HID_APPLE is not set
917CONFIG_USB_SUPPORT=y
918# CONFIG_USB_ARCH_HAS_HCD is not set
919# CONFIG_USB_ARCH_HAS_OHCI is not set
920# CONFIG_USB_ARCH_HAS_EHCI is not set
921# CONFIG_USB_OTG_WHITELIST is not set
922# CONFIG_USB_OTG_BLACKLIST_HUB is not set
923# CONFIG_USB_MUSB_HDRC is not set
924# CONFIG_USB_GADGET_MUSB_HDRC is not set
925
926#
927# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
928#
929CONFIG_USB_GADGET=m
930# CONFIG_USB_GADGET_DEBUG is not set
931CONFIG_USB_GADGET_DEBUG_FILES=y
932# CONFIG_USB_GADGET_DEBUG_FS is not set
933CONFIG_USB_GADGET_VBUS_DRAW=2
934CONFIG_USB_GADGET_SELECTED=y
935# CONFIG_USB_GADGET_AT91 is not set
936CONFIG_USB_GADGET_ATMEL_USBA=y
937CONFIG_USB_ATMEL_USBA=m
938# CONFIG_USB_GADGET_FSL_USB2 is not set
939# CONFIG_USB_GADGET_LH7A40X is not set
940# CONFIG_USB_GADGET_OMAP is not set
941# CONFIG_USB_GADGET_PXA25X is not set
942# CONFIG_USB_GADGET_PXA27X is not set
943# CONFIG_USB_GADGET_S3C2410 is not set
944# CONFIG_USB_GADGET_IMX is not set
945# CONFIG_USB_GADGET_M66592 is not set
946# CONFIG_USB_GADGET_AMD5536UDC is not set
947# CONFIG_USB_GADGET_FSL_QE is not set
948# CONFIG_USB_GADGET_CI13XXX is not set
949# CONFIG_USB_GADGET_NET2280 is not set
950# CONFIG_USB_GADGET_GOKU is not set
951# CONFIG_USB_GADGET_DUMMY_HCD is not set
952CONFIG_USB_GADGET_DUALSPEED=y
953# CONFIG_USB_ZERO is not set
954# CONFIG_USB_ETH is not set
955# CONFIG_USB_GADGETFS is not set
956CONFIG_USB_FILE_STORAGE=m
957# CONFIG_USB_FILE_STORAGE_TEST is not set
958CONFIG_USB_G_SERIAL=m
959# CONFIG_USB_MIDI_GADGET is not set
960# CONFIG_USB_G_PRINTER is not set
961# CONFIG_USB_CDC_COMPOSITE is not set
962
963#
964# OTG and related infrastructure
965#
966# CONFIG_USB_GPIO_VBUS is not set
967# CONFIG_NOP_USB_XCEIV is not set
968CONFIG_MMC=y
969# CONFIG_MMC_DEBUG is not set
970# CONFIG_MMC_UNSAFE_RESUME is not set
971
972#
973# MMC/SD/SDIO Card Drivers
974#
975CONFIG_MMC_BLOCK=y
976CONFIG_MMC_BLOCK_BOUNCE=y
977# CONFIG_SDIO_UART is not set
978# CONFIG_MMC_TEST is not set
979
980#
981# MMC/SD/SDIO Host Controller Drivers
982#
983# CONFIG_MMC_SDHCI is not set
984CONFIG_MMC_ATMELMCI=y
985# CONFIG_MMC_ATMELMCI_DMA is not set
986# CONFIG_MMC_SPI is not set
987# CONFIG_MEMSTICK is not set
988CONFIG_NEW_LEDS=y
989CONFIG_LEDS_CLASS=y
990
991#
992# LED drivers
993#
994CONFIG_LEDS_ATMEL_PWM=y
995# CONFIG_LEDS_PCA9532 is not set
996CONFIG_LEDS_GPIO=y
997CONFIG_LEDS_GPIO_PLATFORM=y
998# CONFIG_LEDS_LP5521 is not set
999# CONFIG_LEDS_PCA955X is not set
1000# CONFIG_LEDS_DAC124S085 is not set
1001# CONFIG_LEDS_BD2802 is not set
1002
1003#
1004# LED Triggers
1005#
1006CONFIG_LEDS_TRIGGERS=y
1007CONFIG_LEDS_TRIGGER_TIMER=y
1008CONFIG_LEDS_TRIGGER_HEARTBEAT=y
1009# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
1010# CONFIG_LEDS_TRIGGER_GPIO is not set
1011# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
1012
1013#
1014# iptables trigger is under Netfilter config (LED target)
1015#
1016# CONFIG_ACCESSIBILITY is not set
1017CONFIG_RTC_LIB=m
1018CONFIG_RTC_CLASS=m
1019
1020#
1021# RTC interfaces
1022#
1023CONFIG_RTC_INTF_SYSFS=y
1024CONFIG_RTC_INTF_PROC=y
1025CONFIG_RTC_INTF_DEV=y
1026# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
1027# CONFIG_RTC_DRV_TEST is not set
1028
1029#
1030# I2C RTC drivers
1031#
1032# CONFIG_RTC_DRV_DS1307 is not set
1033# CONFIG_RTC_DRV_DS1374 is not set
1034# CONFIG_RTC_DRV_DS1672 is not set
1035# CONFIG_RTC_DRV_MAX6900 is not set
1036# CONFIG_RTC_DRV_RS5C372 is not set
1037# CONFIG_RTC_DRV_ISL1208 is not set
1038# CONFIG_RTC_DRV_X1205 is not set
1039# CONFIG_RTC_DRV_PCF8563 is not set
1040# CONFIG_RTC_DRV_PCF8583 is not set
1041# CONFIG_RTC_DRV_M41T80 is not set
1042CONFIG_RTC_DRV_S35390A=m
1043# CONFIG_RTC_DRV_FM3130 is not set
1044# CONFIG_RTC_DRV_RX8581 is not set
1045
1046#
1047# SPI RTC drivers
1048#
1049# CONFIG_RTC_DRV_M41T94 is not set
1050# CONFIG_RTC_DRV_DS1305 is not set
1051# CONFIG_RTC_DRV_DS1390 is not set
1052# CONFIG_RTC_DRV_MAX6902 is not set
1053# CONFIG_RTC_DRV_R9701 is not set
1054# CONFIG_RTC_DRV_RS5C348 is not set
1055# CONFIG_RTC_DRV_DS3234 is not set
1056
1057#
1058# Platform RTC drivers
1059#
1060# CONFIG_RTC_DRV_DS1286 is not set
1061# CONFIG_RTC_DRV_DS1511 is not set
1062# CONFIG_RTC_DRV_DS1553 is not set
1063# CONFIG_RTC_DRV_DS1742 is not set
1064# CONFIG_RTC_DRV_STK17TA8 is not set
1065# CONFIG_RTC_DRV_M48T86 is not set
1066# CONFIG_RTC_DRV_M48T35 is not set
1067# CONFIG_RTC_DRV_M48T59 is not set
1068# CONFIG_RTC_DRV_BQ4802 is not set
1069# CONFIG_RTC_DRV_V3020 is not set
1070
1071#
1072# on-CPU RTC drivers
1073#
1074CONFIG_RTC_DRV_AT32AP700X=m
1075CONFIG_DMADEVICES=y
1076
1077#
1078# DMA Devices
1079#
1080CONFIG_DW_DMAC=y
1081CONFIG_DMA_ENGINE=y
1082
1083#
1084# DMA Clients
1085#
1086# CONFIG_NET_DMA is not set
1087# CONFIG_ASYNC_TX_DMA is not set
1088# CONFIG_DMATEST is not set
1089# CONFIG_AUXDISPLAY is not set
1090CONFIG_UIO=y
1091# CONFIG_UIO_PDRV is not set
1092# CONFIG_UIO_PDRV_GENIRQ is not set
1093# CONFIG_UIO_SMX is not set
1094# CONFIG_UIO_SERCOS3 is not set
1095# CONFIG_STAGING is not set
1096
1097#
1098# File systems
1099#
1100CONFIG_EXT2_FS=y
1101CONFIG_EXT2_FS_XATTR=y
1102# CONFIG_EXT2_FS_POSIX_ACL is not set
1103# CONFIG_EXT2_FS_SECURITY is not set
1104# CONFIG_EXT2_FS_XIP is not set
1105CONFIG_EXT3_FS=y
1106# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
1107CONFIG_EXT3_FS_XATTR=y
1108# CONFIG_EXT3_FS_POSIX_ACL is not set
1109# CONFIG_EXT3_FS_SECURITY is not set
1110# CONFIG_EXT4_FS is not set
1111CONFIG_JBD=y
1112# CONFIG_JBD_DEBUG is not set
1113CONFIG_FS_MBCACHE=y
1114# CONFIG_REISERFS_FS is not set
1115# CONFIG_JFS_FS is not set
1116# CONFIG_FS_POSIX_ACL is not set
1117CONFIG_FILE_LOCKING=y
1118# CONFIG_XFS_FS is not set
1119# CONFIG_OCFS2_FS is not set
1120# CONFIG_BTRFS_FS is not set
1121# CONFIG_DNOTIFY is not set
1122# CONFIG_INOTIFY is not set
1123# CONFIG_QUOTA is not set
1124# CONFIG_AUTOFS_FS is not set
1125# CONFIG_AUTOFS4_FS is not set
1126# CONFIG_FUSE_FS is not set
1127
1128#
1129# Caches
1130#
1131# CONFIG_FSCACHE is not set
1132
1133#
1134# CD-ROM/DVD Filesystems
1135#
1136# CONFIG_ISO9660_FS is not set
1137# CONFIG_UDF_FS is not set
1138
1139#
1140# DOS/FAT/NT Filesystems
1141#
1142CONFIG_FAT_FS=y
1143CONFIG_MSDOS_FS=y
1144CONFIG_VFAT_FS=y
1145CONFIG_FAT_DEFAULT_CODEPAGE=850
1146CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
1147CONFIG_NTFS_FS=m
1148# CONFIG_NTFS_DEBUG is not set
1149CONFIG_NTFS_RW=y
1150
1151#
1152# Pseudo filesystems
1153#
1154CONFIG_PROC_FS=y
1155# CONFIG_PROC_KCORE is not set
1156CONFIG_PROC_SYSCTL=y
1157CONFIG_PROC_PAGE_MONITOR=y
1158CONFIG_SYSFS=y
1159CONFIG_TMPFS=y
1160# CONFIG_TMPFS_POSIX_ACL is not set
1161# CONFIG_HUGETLB_PAGE is not set
1162CONFIG_CONFIGFS_FS=y
1163CONFIG_MISC_FILESYSTEMS=y
1164# CONFIG_ADFS_FS is not set
1165# CONFIG_AFFS_FS is not set
1166# CONFIG_HFS_FS is not set
1167# CONFIG_HFSPLUS_FS is not set
1168# CONFIG_BEFS_FS is not set
1169# CONFIG_BFS_FS is not set
1170# CONFIG_EFS_FS is not set
1171CONFIG_JFFS2_FS=y
1172CONFIG_JFFS2_FS_DEBUG=0
1173CONFIG_JFFS2_FS_WRITEBUFFER=y
1174# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
1175# CONFIG_JFFS2_SUMMARY is not set
1176# CONFIG_JFFS2_FS_XATTR is not set
1177# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
1178CONFIG_JFFS2_ZLIB=y
1179# CONFIG_JFFS2_LZO is not set
1180CONFIG_JFFS2_RTIME=y
1181# CONFIG_JFFS2_RUBIN is not set
1182# CONFIG_CRAMFS is not set
1183# CONFIG_SQUASHFS is not set
1184# CONFIG_VXFS_FS is not set
1185# CONFIG_MINIX_FS is not set
1186# CONFIG_OMFS_FS is not set
1187# CONFIG_HPFS_FS is not set
1188# CONFIG_QNX4FS_FS is not set
1189# CONFIG_ROMFS_FS is not set
1190# CONFIG_SYSV_FS is not set
1191# CONFIG_UFS_FS is not set
1192# CONFIG_NILFS2_FS is not set
1193CONFIG_NETWORK_FILESYSTEMS=y
1194CONFIG_NFS_FS=y
1195CONFIG_NFS_V3=y
1196# CONFIG_NFS_V3_ACL is not set
1197# CONFIG_NFS_V4 is not set
1198CONFIG_ROOT_NFS=y
1199# CONFIG_NFSD is not set
1200CONFIG_LOCKD=y
1201CONFIG_LOCKD_V4=y
1202CONFIG_NFS_COMMON=y
1203CONFIG_SUNRPC=y
1204# CONFIG_RPCSEC_GSS_KRB5 is not set
1205# CONFIG_RPCSEC_GSS_SPKM3 is not set
1206CONFIG_SMB_FS=m
1207CONFIG_SMB_NLS_DEFAULT=y
1208CONFIG_SMB_NLS_REMOTE="cp437"
1209CONFIG_CIFS=m
1210CONFIG_CIFS_STATS=y
1211# CONFIG_CIFS_STATS2 is not set
1212CONFIG_CIFS_WEAK_PW_HASH=y
1213CONFIG_CIFS_XATTR=y
1214CONFIG_CIFS_POSIX=y
1215# CONFIG_CIFS_DEBUG2 is not set
1216# CONFIG_CIFS_EXPERIMENTAL is not set
1217# CONFIG_NCP_FS is not set
1218# CONFIG_CODA_FS is not set
1219# CONFIG_AFS_FS is not set
1220
1221#
1222# Partition Types
1223#
1224# CONFIG_PARTITION_ADVANCED is not set
1225CONFIG_MSDOS_PARTITION=y
1226CONFIG_NLS=y
1227CONFIG_NLS_DEFAULT="iso8859-1"
1228CONFIG_NLS_CODEPAGE_437=y
1229# CONFIG_NLS_CODEPAGE_737 is not set
1230# CONFIG_NLS_CODEPAGE_775 is not set
1231CONFIG_NLS_CODEPAGE_850=y
1232# CONFIG_NLS_CODEPAGE_852 is not set
1233# CONFIG_NLS_CODEPAGE_855 is not set
1234# CONFIG_NLS_CODEPAGE_857 is not set
1235# CONFIG_NLS_CODEPAGE_860 is not set
1236# CONFIG_NLS_CODEPAGE_861 is not set
1237# CONFIG_NLS_CODEPAGE_862 is not set
1238# CONFIG_NLS_CODEPAGE_863 is not set
1239# CONFIG_NLS_CODEPAGE_864 is not set
1240# CONFIG_NLS_CODEPAGE_865 is not set
1241# CONFIG_NLS_CODEPAGE_866 is not set
1242# CONFIG_NLS_CODEPAGE_869 is not set
1243# CONFIG_NLS_CODEPAGE_936 is not set
1244# CONFIG_NLS_CODEPAGE_950 is not set
1245# CONFIG_NLS_CODEPAGE_932 is not set
1246# CONFIG_NLS_CODEPAGE_949 is not set
1247# CONFIG_NLS_CODEPAGE_874 is not set
1248# CONFIG_NLS_ISO8859_8 is not set
1249# CONFIG_NLS_CODEPAGE_1250 is not set
1250# CONFIG_NLS_CODEPAGE_1251 is not set
1251# CONFIG_NLS_ASCII is not set
1252CONFIG_NLS_ISO8859_1=y
1253# CONFIG_NLS_ISO8859_2 is not set
1254# CONFIG_NLS_ISO8859_3 is not set
1255# CONFIG_NLS_ISO8859_4 is not set
1256# CONFIG_NLS_ISO8859_5 is not set
1257# CONFIG_NLS_ISO8859_6 is not set
1258# CONFIG_NLS_ISO8859_7 is not set
1259# CONFIG_NLS_ISO8859_9 is not set
1260# CONFIG_NLS_ISO8859_13 is not set
1261# CONFIG_NLS_ISO8859_14 is not set
1262# CONFIG_NLS_ISO8859_15 is not set
1263# CONFIG_NLS_KOI8_R is not set
1264# CONFIG_NLS_KOI8_U is not set
1265CONFIG_NLS_UTF8=y
1266# CONFIG_DLM is not set
1267
1268#
1269# Kernel hacking
1270#
1271# CONFIG_PRINTK_TIME is not set
1272CONFIG_ENABLE_WARN_DEPRECATED=y
1273CONFIG_ENABLE_MUST_CHECK=y
1274CONFIG_FRAME_WARN=1024
1275CONFIG_MAGIC_SYSRQ=y
1276# CONFIG_UNUSED_SYMBOLS is not set
1277CONFIG_DEBUG_FS=y
1278# CONFIG_HEADERS_CHECK is not set
1279CONFIG_DEBUG_KERNEL=y
1280# CONFIG_DEBUG_SHIRQ is not set
1281CONFIG_DETECT_SOFTLOCKUP=y
1282# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
1283CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
1284CONFIG_DETECT_HUNG_TASK=y
1285# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
1286CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
1287CONFIG_SCHED_DEBUG=y
1288# CONFIG_SCHEDSTATS is not set
1289# CONFIG_TIMER_STATS is not set
1290# CONFIG_DEBUG_OBJECTS is not set
1291# CONFIG_DEBUG_RT_MUTEXES is not set
1292# CONFIG_RT_MUTEX_TESTER is not set
1293# CONFIG_DEBUG_SPINLOCK is not set
1294# CONFIG_DEBUG_MUTEXES is not set
1295# CONFIG_DEBUG_LOCK_ALLOC is not set
1296# CONFIG_PROVE_LOCKING is not set
1297# CONFIG_LOCK_STAT is not set
1298# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
1299# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
1300# CONFIG_DEBUG_KOBJECT is not set
1301CONFIG_DEBUG_BUGVERBOSE=y
1302# CONFIG_DEBUG_INFO is not set
1303# CONFIG_DEBUG_VM is not set
1304# CONFIG_DEBUG_WRITECOUNT is not set
1305# CONFIG_DEBUG_MEMORY_INIT is not set
1306# CONFIG_DEBUG_LIST is not set
1307# CONFIG_DEBUG_SG is not set
1308# CONFIG_DEBUG_NOTIFIERS is not set
1309CONFIG_FRAME_POINTER=y
1310# CONFIG_BOOT_PRINTK_DELAY is not set
1311# CONFIG_RCU_TORTURE_TEST is not set
1312# CONFIG_RCU_CPU_STALL_DETECTOR is not set
1313# CONFIG_BACKTRACE_SELF_TEST is not set
1314# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
1315# CONFIG_FAULT_INJECTION is not set
1316# CONFIG_PAGE_POISONING is not set
1317CONFIG_TRACING_SUPPORT=y
1318
1319#
1320# Tracers
1321#
1322# CONFIG_IRQSOFF_TRACER is not set
1323# CONFIG_SCHED_TRACER is not set
1324# CONFIG_CONTEXT_SWITCH_TRACER is not set
1325# CONFIG_EVENT_TRACER is not set
1326# CONFIG_BOOT_TRACER is not set
1327# CONFIG_TRACE_BRANCH_PROFILING is not set
1328# CONFIG_KMEMTRACE is not set
1329# CONFIG_WORKQUEUE_TRACER is not set
1330# CONFIG_BLK_DEV_IO_TRACE is not set
1331# CONFIG_DYNAMIC_DEBUG is not set
1332# CONFIG_SAMPLES is not set
1333
1334#
1335# Security options
1336#
1337# CONFIG_KEYS is not set
1338# CONFIG_SECURITY is not set
1339# CONFIG_SECURITYFS is not set
1340# CONFIG_SECURITY_FILE_CAPABILITIES is not set
1341# CONFIG_CRYPTO is not set
1342# CONFIG_BINARY_PRINTF is not set
1343
1344#
1345# Library routines
1346#
1347CONFIG_BITREVERSE=y
1348CONFIG_GENERIC_FIND_LAST_BIT=y
1349CONFIG_CRC_CCITT=y
1350# CONFIG_CRC16 is not set
1351# CONFIG_CRC_T10DIF is not set
1352# CONFIG_CRC_ITU_T is not set
1353CONFIG_CRC32=y
1354# CONFIG_CRC7 is not set
1355# CONFIG_LIBCRC32C is not set
1356CONFIG_ZLIB_INFLATE=y
1357CONFIG_ZLIB_DEFLATE=y
1358CONFIG_DECOMPRESS_GZIP=y
1359CONFIG_GENERIC_ALLOCATOR=y
1360CONFIG_HAS_IOMEM=y
1361CONFIG_HAS_IOPORT=y
1362CONFIG_HAS_DMA=y
1363CONFIG_NLATTR=y
diff --git a/arch/avr32/include/asm/atomic.h b/arch/avr32/include/asm/atomic.h
index 318815107748..b131c27ddf57 100644
--- a/arch/avr32/include/asm/atomic.h
+++ b/arch/avr32/include/asm/atomic.h
@@ -196,6 +196,6 @@ static inline int atomic_sub_if_positive(int i, atomic_t *v)
196#define smp_mb__before_atomic_inc() barrier() 196#define smp_mb__before_atomic_inc() barrier()
197#define smp_mb__after_atomic_inc() barrier() 197#define smp_mb__after_atomic_inc() barrier()
198 198
199#include <asm-generic/atomic.h> 199#include <asm-generic/atomic-long.h>
200 200
201#endif /* __ASM_AVR32_ATOMIC_H */ 201#endif /* __ASM_AVR32_ATOMIC_H */
diff --git a/arch/avr32/include/asm/bitsperlong.h b/arch/avr32/include/asm/bitsperlong.h
new file mode 100644
index 000000000000..6dc0bb0c13b2
--- /dev/null
+++ b/arch/avr32/include/asm/bitsperlong.h
@@ -0,0 +1 @@
#include <asm-generic/bitsperlong.h>
diff --git a/arch/avr32/include/asm/hw_irq.h b/arch/avr32/include/asm/hw_irq.h
index 218b0a6bfd1b..a36f9fcb8fcd 100644
--- a/arch/avr32/include/asm/hw_irq.h
+++ b/arch/avr32/include/asm/hw_irq.h
@@ -1,7 +1,7 @@
1#ifndef __ASM_AVR32_HW_IRQ_H 1#ifndef __ASM_AVR32_HW_IRQ_H
2#define __ASM_AVR32_HW_IRQ_H 2#define __ASM_AVR32_HW_IRQ_H
3 3
4static inline void hw_resend_irq(struct hw_interrupt_type *h, unsigned int i) 4static inline void hw_resend_irq(struct irq_chip *h, unsigned int i)
5{ 5{
6 /* Nothing to do */ 6 /* Nothing to do */
7} 7}
diff --git a/arch/avr32/include/asm/mman.h b/arch/avr32/include/asm/mman.h
index 648f91e7187a..9a92b15f6a66 100644
--- a/arch/avr32/include/asm/mman.h
+++ b/arch/avr32/include/asm/mman.h
@@ -1,7 +1,7 @@
1#ifndef __ASM_AVR32_MMAN_H__ 1#ifndef __ASM_AVR32_MMAN_H__
2#define __ASM_AVR32_MMAN_H__ 2#define __ASM_AVR32_MMAN_H__
3 3
4#include <asm-generic/mman.h> 4#include <asm-generic/mman-common.h>
5 5
6#define MAP_GROWSDOWN 0x0100 /* stack-like segment */ 6#define MAP_GROWSDOWN 0x0100 /* stack-like segment */
7#define MAP_DENYWRITE 0x0800 /* ETXTBSY */ 7#define MAP_DENYWRITE 0x0800 /* ETXTBSY */
diff --git a/arch/avr32/include/asm/signal.h b/arch/avr32/include/asm/signal.h
index caffefeeba1f..8790dfc10d5b 100644
--- a/arch/avr32/include/asm/signal.h
+++ b/arch/avr32/include/asm/signal.h
@@ -112,7 +112,7 @@ typedef unsigned long sigset_t;
112#define MINSIGSTKSZ 2048 112#define MINSIGSTKSZ 2048
113#define SIGSTKSZ 8192 113#define SIGSTKSZ 8192
114 114
115#include <asm-generic/signal.h> 115#include <asm-generic/signal-defs.h>
116 116
117#ifdef __KERNEL__ 117#ifdef __KERNEL__
118struct old_sigaction { 118struct old_sigaction {
diff --git a/arch/avr32/include/asm/termios.h b/arch/avr32/include/asm/termios.h
index 0152aba35154..dd7e9da25488 100644
--- a/arch/avr32/include/asm/termios.h
+++ b/arch/avr32/include/asm/termios.h
@@ -55,7 +55,7 @@ struct termio {
55*/ 55*/
56#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0" 56#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0"
57 57
58#include <asm-generic/termios.h> 58#include <asm-generic/termios-base.h>
59 59
60#endif /* __KERNEL__ */ 60#endif /* __KERNEL__ */
61 61
diff --git a/arch/avr32/kernel/module.c b/arch/avr32/kernel/module.c
index 1167fe9cf6c4..98f94d041d9c 100644
--- a/arch/avr32/kernel/module.c
+++ b/arch/avr32/kernel/module.c
@@ -32,8 +32,6 @@ void module_free(struct module *mod, void *module_region)
32 mod->arch.syminfo = NULL; 32 mod->arch.syminfo = NULL;
33 33
34 vfree(module_region); 34 vfree(module_region);
35 /* FIXME: if module_region == mod->init_region, trim exception
36 * table entries. */
37} 35}
38 36
39static inline int check_rela(Elf32_Rela *rela, struct module *module, 37static inline int check_rela(Elf32_Rela *rela, struct module *module,
diff --git a/arch/avr32/kernel/traps.c b/arch/avr32/kernel/traps.c
index d547c8df157d..6e3d491184ea 100644
--- a/arch/avr32/kernel/traps.c
+++ b/arch/avr32/kernel/traps.c
@@ -75,8 +75,17 @@ void _exception(long signr, struct pt_regs *regs, int code,
75{ 75{
76 siginfo_t info; 76 siginfo_t info;
77 77
78 if (!user_mode(regs)) 78 if (!user_mode(regs)) {
79 const struct exception_table_entry *fixup;
80
81 /* Are we prepared to handle this kernel fault? */
82 fixup = search_exception_tables(regs->pc);
83 if (fixup) {
84 regs->pc = fixup->fixup;
85 return;
86 }
79 die("Unhandled exception in kernel mode", regs, signr); 87 die("Unhandled exception in kernel mode", regs, signr);
88 }
80 89
81 memset(&info, 0, sizeof(info)); 90 memset(&info, 0, sizeof(info));
82 info.si_signo = signr; 91 info.si_signo = signr;
diff --git a/arch/avr32/mach-at32ap/include/mach/board.h b/arch/avr32/mach-at32ap/include/mach/board.h
index 0b8164281899..ddedb471f33e 100644
--- a/arch/avr32/mach-at32ap/include/mach/board.h
+++ b/arch/avr32/mach-at32ap/include/mach/board.h
@@ -29,7 +29,7 @@ extern struct platform_device *atmel_default_console_device;
29/* Flags for selecting USART extra pins */ 29/* Flags for selecting USART extra pins */
30#define ATMEL_USART_RTS 0x01 30#define ATMEL_USART_RTS 0x01
31#define ATMEL_USART_CTS 0x02 31#define ATMEL_USART_CTS 0x02
32#define ATMEL_USART_CLK 0x03 32#define ATMEL_USART_CLK 0x04
33 33
34struct atmel_uart_data { 34struct atmel_uart_data {
35 short use_dma_tx; /* use transmit DMA? */ 35 short use_dma_tx; /* use transmit DMA? */
generated by cgit v1.2.2 (git 2.25.0) at 2024-11-25 10:16:52 -0500