1 files changed, 53 insertions, 0 deletions

diff --git a/arch/avr32/boards/atstk1000/Kconfig b/arch/avr32/boards/atstk1000/Kconfig
new file mode 100644
index 000000000000..71bc7d364fb7
--- /dev/null
+++ b/arch/avr32/boards/atstk1000/Kconfig
@@ -0,0 +1,53 @@
+# STK1000 customization
+
+if BOARD_ATSTK1002
+
+config BOARD_ATSTK1002_CUSTOM
+        bool "Non-default STK-1002 jumper settings"
+        help
+          You will normally leave the jumpers on the CPU card at their
+          default settings.  If you need to use certain peripherals,
+          you will need to change some of those jumpers.
+
+if BOARD_ATSTK1002_CUSTOM
+
+config BOARD_ATSTK1002_SW1_CUSTOM
+        bool "SW1: use SSC1 (not SPI0)"
+        help
+          This also prevents using the external DAC as an audio interface,
+          and means you can't initialize the on-board QVGA display.
+
+config BOARD_ATSTK1002_SW2_CUSTOM
+        bool "SW2: use IRDA or TIMER0 (not UART-A, MMC/SD, and PS2-A)"
+        help
+          If you change this you'll want an updated boot loader putting
+          the console on UART-C not UART-A.
+
+config BOARD_ATSTK1002_SW3_CUSTOM
+        bool "SW3: use TIMER1 (not SSC0 and GCLK)"
+        help
+          This also prevents using the external DAC as an audio interface.
+
+config BOARD_ATSTK1002_SW4_CUSTOM
+        bool "SW4: use ISI/Camera (not GPIOs, SPI1, and PS2-B)"
+        help
+          To use the camera interface you'll need a custom card (on the
+          PCI-format connector) connect a video sensor.
+
+config BOARD_ATSTK1002_SW5_CUSTOM
+        bool "SW5: use MACB1 (not LCDC)"
+
+config BOARD_ATSTK1002_SW6_CUSTOM
+        bool "SW6: more GPIOs (not MACB0)"
+
+endif   # custom
+
+config BOARD_ATSTK1002_SPI1
+        bool "Configure SPI1 controller"
+        depends on !BOARD_ATSTK1002_SW4_CUSTOM
+        help
+          All the signals for the second SPI controller are available on
+          GPIO lines and accessed through the J1 jumper block.  Say "y"
+          here to configure that SPI controller.
+
+endif   # stk 1002