126 files changed, 590 insertions, 651 deletions

diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index f9da41921c52..942fad97e447 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -691,9 +691,9 @@ proc_types:
 
                 .word   0x41069260              @ ARM926EJ-S (v5TEJ)
                 .word   0xff0ffff0
-                b       __arm926ejs_mmu_cache_on
-                b       __armv4_mmu_cache_off
-                b       __armv5tej_mmu_cache_flush
+                W(b)    __arm926ejs_mmu_cache_on
+                W(b)    __armv4_mmu_cache_off
+                W(b)    __armv5tej_mmu_cache_flush
 
                 .word   0x00007000              @ ARM7 IDs
                 .word   0x0000f000
diff --git a/arch/arm/configs/davinci_all_defconfig b/arch/arm/configs/davinci_all_defconfig
index 889922ad229c..67b5abb6f857 100644
--- a/arch/arm/configs/davinci_all_defconfig
+++ b/arch/arm/configs/davinci_all_defconfig
@@ -157,7 +157,7 @@ CONFIG_LEDS_GPIO=m
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=m
 CONFIG_LEDS_TRIGGER_HEARTBEAT=m
-CONFIG_RTC_CLASS=m
+CONFIG_RTC_CLASS=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
 CONFIG_XFS_FS=m
diff --git a/arch/arm/configs/mx51_defconfig b/arch/arm/configs/mx51_defconfig
index 0ace16cba9b5..88c5802a2351 100644
--- a/arch/arm/configs/mx51_defconfig
+++ b/arch/arm/configs/mx51_defconfig
@@ -106,6 +106,7 @@ CONFIG_GPIO_SYSFS=y
 CONFIG_USB=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_MXC=y
+CONFIG_USB_STORAGE=y
 CONFIG_MMC=y
 CONFIG_MMC_BLOCK=m
 CONFIG_MMC_SDHCI=m
@@ -145,7 +146,7 @@ CONFIG_ROOT_NFS=y
 CONFIG_NLS_DEFAULT="cp437"
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ASCII=y
-CONFIG_NLS_ISO8859_1=m
+CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_ISO8859_15=m
 CONFIG_NLS_UTF8=y
 CONFIG_MAGIC_SYSRQ=y
diff --git a/arch/arm/configs/mxs_defconfig b/arch/arm/configs/mxs_defconfig
index 2bf224310fb4..5a6ff7c605df 100644
--- a/arch/arm/configs/mxs_defconfig
+++ b/arch/arm/configs/mxs_defconfig
@@ -89,7 +89,7 @@ CONFIG_DISPLAY_SUPPORT=m
 # CONFIG_USB_SUPPORT is not set
 CONFIG_MMC=y
 CONFIG_MMC_MXS=y
-CONFIG_RTC_CLASS=m
+CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_DS1307=m
 CONFIG_DMADEVICES=y
 CONFIG_MXS_DMA=y
diff --git a/arch/arm/configs/netx_defconfig b/arch/arm/configs/netx_defconfig
index 316af5479d90..9c0ad7993986 100644
--- a/arch/arm/configs/netx_defconfig
+++ b/arch/arm/configs/netx_defconfig
@@ -60,7 +60,7 @@ CONFIG_FB_ARMCLCD=y
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_LOGO=y
-CONFIG_RTC_CLASS=m
+CONFIG_RTC_CLASS=y
 CONFIG_INOTIFY=y
 CONFIG_TMPFS=y
 CONFIG_JFFS2_FS=y
diff --git a/arch/arm/configs/viper_defconfig b/arch/arm/configs/viper_defconfig
index 8b0c717378fa..1d01ddd33122 100644
--- a/arch/arm/configs/viper_defconfig
+++ b/arch/arm/configs/viper_defconfig
@@ -142,7 +142,7 @@ CONFIG_USB_GADGETFS=m
 CONFIG_USB_FILE_STORAGE=m
 CONFIG_USB_G_SERIAL=m
 CONFIG_USB_G_PRINTER=m
-CONFIG_RTC_CLASS=m
+CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_DS1307=m
 CONFIG_RTC_DRV_SA1100=m
 CONFIG_EXT2_FS=m
diff --git a/arch/arm/configs/xcep_defconfig b/arch/arm/configs/xcep_defconfig
index 5b5504143647..721832ffe2d7 100644
--- a/arch/arm/configs/xcep_defconfig
+++ b/arch/arm/configs/xcep_defconfig
@@ -73,7 +73,7 @@ CONFIG_SENSORS_MAX6650=m
 # CONFIG_VGA_CONSOLE is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
-CONFIG_RTC_CLASS=m
+CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_SA1100=m
 CONFIG_DMADEVICES=y
 # CONFIG_DNOTIFY is not set
diff --git a/arch/arm/configs/zeus_defconfig b/arch/arm/configs/zeus_defconfig
index 960f65514d88..59577ad3f4ef 100644
--- a/arch/arm/configs/zeus_defconfig
+++ b/arch/arm/configs/zeus_defconfig
@@ -158,7 +158,7 @@ CONFIG_LEDS_TRIGGER_HEARTBEAT=m
 CONFIG_LEDS_TRIGGER_BACKLIGHT=m
 CONFIG_LEDS_TRIGGER_GPIO=m
 CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
-CONFIG_RTC_CLASS=m
+CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_ISL1208=m
 CONFIG_RTC_DRV_PXA=m
 CONFIG_EXT2_FS=y
diff --git a/arch/arm/kernel/devtree.c b/arch/arm/kernel/devtree.c
index a701e4226a6c..0cdd7b456cb2 100644
--- a/arch/arm/kernel/devtree.c
+++ b/arch/arm/kernel/devtree.c
@@ -76,6 +76,9 @@ struct machine_desc * __init setup_machine_fdt(unsigned int dt_phys)
         unsigned long dt_root;
         const char *model;
 
+        if (!dt_phys)
+                return NULL;
+
         devtree = phys_to_virt(dt_phys);
 
         /* check device tree validity */
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index e8d885676807..90c62cd51ca9 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -435,6 +435,10 @@ __irq_usr:
         usr_entry
         kuser_cmpxchg_check
 
+#ifdef CONFIG_IRQSOFF_TRACER
+        bl      trace_hardirqs_off
+#endif
+
         get_thread_info tsk
 #ifdef CONFIG_PREEMPT
         ldr     r8, [tsk, #TI_PREEMPT]          @ get preempt count
@@ -453,7 +457,7 @@ __irq_usr:
 #endif
 
         mov     why, #0
-        b       ret_to_user
+        b       ret_to_user_from_irq
  UNWIND(.fnend          )
 ENDPROC(__irq_usr)
 
diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S
index 1e7b04a40a31..b2a27b6b0046 100644
--- a/arch/arm/kernel/entry-common.S
+++ b/arch/arm/kernel/entry-common.S
@@ -64,6 +64,7 @@ work_resched:
 ENTRY(ret_to_user)
 ret_slow_syscall:
         disable_irq                             @ disable interrupts
+ENTRY(ret_to_user_from_irq)
         ldr     r1, [tsk, #TI_FLAGS]
         tst     r1, #_TIF_WORK_MASK
         bne     work_pending
@@ -75,6 +76,7 @@ no_work_pending:
         arch_ret_to_user r1, lr
 
         restore_user_regs fast = 0, offset = 0
+ENDPROC(ret_to_user_from_irq)
 ENDPROC(ret_to_user)
 
 /*
diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c
index d52eec268b47..6807cb1e76dd 100644
--- a/arch/arm/kernel/traps.c
+++ b/arch/arm/kernel/traps.c
@@ -139,7 +139,7 @@ static void dump_instr(const char *lvl, struct pt_regs *regs)
         fs = get_fs();
         set_fs(KERNEL_DS);
 
-        for (i = -4; i < 1; i++) {
+        for (i = -4; i < 1 + !!thumb; i++) {
                 unsigned int val, bad;
 
                 if (thumb)
@@ -563,7 +563,7 @@ asmlinkage int arm_syscall(int no, struct pt_regs *regs)
                 if (!pmd_present(*pmd))
                         goto bad_access;
                 pte = pte_offset_map_lock(mm, pmd, addr, &ptl);
-                if (!pte_present(*pte) || !pte_dirty(*pte)) {
+                if (!pte_present(*pte) || !pte_write(*pte) || !pte_dirty(*pte)) {
                         pte_unmap_unlock(pte, ptl);
                         goto bad_access;
                 }
diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c
index 4e66881c7aee..fc4e98ea7543 100644
--- a/arch/arm/mach-davinci/devices-da8xx.c
+++ b/arch/arm/mach-davinci/devices-da8xx.c
@@ -494,7 +494,7 @@ static struct platform_device da850_mcasp_device = {
         .resource       = da850_mcasp_resources,
 };
 
-struct platform_device davinci_pcm_device = {
+static struct platform_device davinci_pcm_device = {
         .name   = "davinci-pcm-audio",
         .id     = -1,
 };
diff --git a/arch/arm/mach-davinci/devices.c b/arch/arm/mach-davinci/devices.c
index 8f4f736aa267..806a2f02b980 100644
--- a/arch/arm/mach-davinci/devices.c
+++ b/arch/arm/mach-davinci/devices.c
@@ -298,7 +298,7 @@ static void davinci_init_wdt(void)
 
 /*-------------------------------------------------------------------------*/
 
-struct platform_device davinci_pcm_device = {
+static struct platform_device davinci_pcm_device = {
         .name           = "davinci-pcm-audio",
         .id             = -1,
 };
diff --git a/arch/arm/mach-davinci/gpio.c b/arch/arm/mach-davinci/gpio.c
index a0b838894ac9..e7221398e5af 100644
--- a/arch/arm/mach-davinci/gpio.c
+++ b/arch/arm/mach-davinci/gpio.c
@@ -252,9 +252,11 @@ static struct irq_chip gpio_irqchip = {
 static void
 gpio_irq_handler(unsigned irq, struct irq_desc *desc)
 {
-        struct davinci_gpio_regs __iomem *g = irq2regs(irq);
+        struct davinci_gpio_regs __iomem *g;
         u32 mask = 0xffff;
 
+        g = (__force struct davinci_gpio_regs __iomem *) irq_desc_get_handler_data(desc);
+
         /* we only care about one bank */
         if (irq & 1)
                 mask <<= 16;
@@ -422,8 +424,7 @@ static int __init davinci_gpio_irq_setup(void)
 
                 /* set up all irqs in this bank */
                 irq_set_chained_handler(bank_irq, gpio_irq_handler);
-                irq_set_chip_data(bank_irq, (__force void *)g);
-                irq_set_handler_data(bank_irq, (void *)irq);
+                irq_set_handler_data(bank_irq, (__force void *)g);
 
                 for (i = 0; i < 16 && gpio < ngpio; i++, irq++, gpio++) {
                         irq_set_chip(irq, &gpio_irqchip);
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index 82079545adc4..1d4b65fd673e 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -402,11 +402,15 @@ static struct resource ep93xx_eth_resource[] = {
         }
 };
 
+static u64 ep93xx_eth_dma_mask = DMA_BIT_MASK(32);
+
 static struct platform_device ep93xx_eth_device = {
         .name           = "ep93xx-eth",
         .id             = -1,
         .dev            = {
-                .platform_data  = &ep93xx_eth_data,
+                .platform_data          = &ep93xx_eth_data,
+                .coherent_dma_mask      = DMA_BIT_MASK(32),
+                .dma_mask               = &ep93xx_eth_dma_mask,
         },
         .num_resources  = ARRAY_SIZE(ep93xx_eth_resource),
         .resource       = ep93xx_eth_resource,
diff --git a/arch/arm/mach-exynos4/Kconfig b/arch/arm/mach-exynos4/Kconfig
index b92c1e557145..1435fc31c4b2 100644
--- a/arch/arm/mach-exynos4/Kconfig
+++ b/arch/arm/mach-exynos4/Kconfig
@@ -91,6 +91,11 @@ config EXYNOS4_SETUP_FIMC
         help
           Common setup code for the camera interfaces.
 
+config EXYNOS4_SETUP_USB_PHY
+        bool
+        help
+          Common setup code for USB PHY controller
+
 # machine support
 
 menu "EXYNOS4 Machines"
@@ -176,6 +181,7 @@ config MACH_NURI
         select EXYNOS4_SETUP_I2C3
         select EXYNOS4_SETUP_I2C5
         select EXYNOS4_SETUP_SDHCI
+        select EXYNOS4_SETUP_USB_PHY
         select SAMSUNG_DEV_PWM
         help
           Machine support for Samsung Mobile NURI Board.
diff --git a/arch/arm/mach-exynos4/Makefile b/arch/arm/mach-exynos4/Makefile
index a9bb94fabaa7..60fe5ecf3599 100644
--- a/arch/arm/mach-exynos4/Makefile
+++ b/arch/arm/mach-exynos4/Makefile
@@ -56,4 +56,4 @@ obj-$(CONFIG_EXYNOS4_SETUP_KEYPAD)	+= setup-keypad.o
 obj-$(CONFIG_EXYNOS4_SETUP_SDHCI)       += setup-sdhci.o
 obj-$(CONFIG_EXYNOS4_SETUP_SDHCI_GPIO)  += setup-sdhci-gpio.o
 
-obj-$(CONFIG_USB_SUPPORT)               += usb-phy.o
+obj-$(CONFIG_EXYNOS4_SETUP_USB_PHY)     += setup-usb-phy.o
diff --git a/arch/arm/mach-exynos4/cpu.c b/arch/arm/mach-exynos4/cpu.c
index 08813a6f66b1..9babe4473e88 100644
--- a/arch/arm/mach-exynos4/cpu.c
+++ b/arch/arm/mach-exynos4/cpu.c
@@ -98,7 +98,7 @@ static struct map_desc exynos4_iodesc[] __initdata = {
                 .length         = SZ_4K,
                 .type           = MT_DEVICE,
         }, {
-                .virtual        = (unsigned long)S5P_VA_USB_HSPHY,
+                .virtual        = (unsigned long)S3C_VA_USB_HSPHY,
                 .pfn            = __phys_to_pfn(EXYNOS4_PA_HSPHY),
                 .length         = SZ_4K,
                 .type           = MT_DEVICE,
diff --git a/arch/arm/mach-exynos4/include/mach/regs-usb-phy.h b/arch/arm/mach-exynos4/include/mach/regs-usb-phy.h
index 703118d5173c..c337cf3a71bf 100644
--- a/arch/arm/mach-exynos4/include/mach/regs-usb-phy.h
+++ b/arch/arm/mach-exynos4/include/mach/regs-usb-phy.h
@@ -11,7 +11,7 @@
 #ifndef __PLAT_S5P_REGS_USB_PHY_H
 #define __PLAT_S5P_REGS_USB_PHY_H
 
-#define EXYNOS4_HSOTG_PHYREG(x)         ((x) + S5P_VA_USB_HSPHY)
+#define EXYNOS4_HSOTG_PHYREG(x)         ((x) + S3C_VA_USB_HSPHY)
 
 #define EXYNOS4_PHYPWR                  EXYNOS4_HSOTG_PHYREG(0x00)
 #define PHY1_HSIC_NORMAL_MASK           (0xf << 9)
diff --git a/arch/arm/mach-exynos4/usb-phy.c b/arch/arm/mach-exynos4/setup-usb-phy.c
index 0883c1b824b9..0883c1b824b9 100644
--- a/arch/arm/mach-exynos4/usb-phy.c
+++ b/arch/arm/mach-exynos4/setup-usb-phy.c
diff --git a/arch/arm/mach-exynos4/time.c b/arch/arm/mach-exynos4/time.c
index 86b9fa0d3639..ebb8f38d5405 100644
--- a/arch/arm/mach-exynos4/time.c
+++ b/arch/arm/mach-exynos4/time.c
@@ -206,6 +206,7 @@ static cycle_t exynos4_pwm4_read(struct clocksource *cs)
         return (cycle_t) ~__raw_readl(S3C_TIMERREG(0x40));
 }
 
+#ifdef CONFIG_PM
 static void exynos4_pwm4_resume(struct clocksource *cs)
 {
         unsigned long pclk;
@@ -218,6 +219,7 @@ static void exynos4_pwm4_resume(struct clocksource *cs)
         exynos4_pwm_init(4, ~0);
         exynos4_pwm_start(4, 1);
 }
+#endif
 
 struct clocksource pwm_clocksource = {
         .name           = "pwm_timer4",
diff --git a/arch/arm/mach-footbridge/dc21285-timer.c b/arch/arm/mach-footbridge/dc21285-timer.c
index 5f1f9867fc70..121ad1d4fa39 100644
--- a/arch/arm/mach-footbridge/dc21285-timer.c
+++ b/arch/arm/mach-footbridge/dc21285-timer.c
@@ -103,6 +103,7 @@ static void __init footbridge_timer_init(void)
         clockevents_calc_mult_shift(ce, mem_fclk_21285, 5);
         ce->max_delta_ns = clockevent_delta2ns(0xffffff, ce);
         ce->min_delta_ns = clockevent_delta2ns(0x000004, ce);
+        ce->cpumask = cpumask_of(smp_processor_id());
 
         clockevents_register_device(ce);
 }
diff --git a/arch/arm/mach-footbridge/include/mach/debug-macro.S b/arch/arm/mach-footbridge/include/mach/debug-macro.S
index 30b971d65815..1be2eeb7a0a0 100644
--- a/arch/arm/mach-footbridge/include/mach/debug-macro.S
+++ b/arch/arm/mach-footbridge/include/mach/debug-macro.S
@@ -26,6 +26,7 @@
 #include <asm/hardware/debug-8250.S>
 
 #else
+#include <mach/hardware.h>
         /* For EBSA285 debugging */
                 .equ    dc21285_high, ARMCSR_BASE & 0xff000000
                 .equ    dc21285_low,  ARMCSR_BASE & 0x00ffffff
@@ -36,8 +37,8 @@
                 .else
                 mov     \rp, #0
                 .endif
-                orr     \rv, \rp, #0x42000000
-                orr     \rp, \rp, #dc21285_high
+                orr     \rv, \rp, #dc21285_high
+                orr     \rp, \rp, #0x42000000
                 .endm
 
                 .macro  senduart,rd,rx
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 59c97a331136..e8dd22fa7d61 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -167,6 +167,7 @@ config MACH_EUKREA_MBIMXSD25_BASEBOARD
         bool "Eukrea MBIMXSD development board"
         select IMX_HAVE_PLATFORM_GPIO_KEYS
         select IMX_HAVE_PLATFORM_IMX_SSI
+        select LEDS_GPIO_REGISTER
         help
           This adds board specific devices that can be found on Eukrea's
           MBIMXSD evaluation board.
@@ -265,6 +266,7 @@ config MACH_EUKREA_MBIMX27_BASEBOARD
         select IMX_HAVE_PLATFORM_IMX_UART
         select IMX_HAVE_PLATFORM_MXC_MMC
         select IMX_HAVE_PLATFORM_SPI_IMX
+        select LEDS_GPIO_REGISTER
         help
           This adds board specific devices that can be found on Eukrea's
           MBIMX27 evaluation board.
@@ -403,6 +405,7 @@ config MACH_MX31LITE
         select IMX_HAVE_PLATFORM_MXC_NAND
         select IMX_HAVE_PLATFORM_MXC_RTC
         select IMX_HAVE_PLATFORM_SPI_IMX
+        select LEDS_GPIO_REGISTER
         help
           Include support for MX31 LITEKIT platform. This includes specific
           configurations for the board and its peripherals.
@@ -471,6 +474,7 @@ config MACH_MX31MOBOARD
         select IMX_HAVE_PLATFORM_MXC_EHCI
         select IMX_HAVE_PLATFORM_MXC_MMC
         select IMX_HAVE_PLATFORM_SPI_IMX
+        select LEDS_GPIO_REGISTER
         select MXC_ULPI if USB_ULPI
         help
           Include support for mx31moboard platform. This includes specific
@@ -577,6 +581,7 @@ config MACH_EUKREA_MBIMXSD35_BASEBOARD
         select IMX_HAVE_PLATFORM_GPIO_KEYS
         select IMX_HAVE_PLATFORM_IMX_SSI
         select IMX_HAVE_PLATFORM_IPU_CORE
+        select LEDS_GPIO_REGISTER
         help
           This adds board specific devices that can be found on Eukrea's
           MBIMXSD evaluation board.
diff --git a/arch/arm/mach-imx/dma-v1.c b/arch/arm/mach-imx/dma-v1.c
index 236f1495efad..4d76f67f270f 100644
--- a/arch/arm/mach-imx/dma-v1.c
+++ b/arch/arm/mach-imx/dma-v1.c
@@ -475,7 +475,6 @@ void imx_dma_enable(int channel)
         imx_dmav1_writel(imx_dmav1_readl(DMA_CCR(channel)) | CCR_CEN |
                 CCR_ACRPT, DMA_CCR(channel));
 
-#ifdef CONFIG_ARCH_MX2
         if ((cpu_is_mx21() || cpu_is_mx27()) &&
                         imxdma->sg && imx_dma_hw_chain(imxdma)) {
                 imxdma->sg = sg_next(imxdma->sg);
@@ -487,7 +486,6 @@ void imx_dma_enable(int channel)
                                 DMA_CCR(channel));
                 }
         }
-#endif
         imxdma->in_use = 1;
 
         local_irq_restore(flags);
@@ -518,7 +516,6 @@ void imx_dma_disable(int channel)
 }
 EXPORT_SYMBOL(imx_dma_disable);
 
-#ifdef CONFIG_ARCH_MX2
 static void imx_dma_watchdog(unsigned long chno)
 {
         struct imx_dma_channel *imxdma = &imx_dma_channels[chno];
@@ -530,7 +527,6 @@ static void imx_dma_watchdog(unsigned long chno)
         if (imxdma->err_handler)
                 imxdma->err_handler(chno, imxdma->data, IMX_DMA_ERR_TIMEOUT);
 }
-#endif
 
 static irqreturn_t dma_err_handler(int irq, void *dev_id)
 {
@@ -654,10 +650,8 @@ static irqreturn_t dma_irq_handler(int irq, void *dev_id)
 {
         int i, disr;
 
-#ifdef CONFIG_ARCH_MX2
         if (cpu_is_mx21() || cpu_is_mx27())
                 dma_err_handler(irq, dev_id);
-#endif
 
         disr = imx_dmav1_readl(DMA_DISR);
 
@@ -703,7 +697,6 @@ int imx_dma_request(int channel, const char *name)
         imxdma->name = name;
         local_irq_restore(flags); /* request_irq() can block */
 
-#ifdef CONFIG_ARCH_MX2
         if (cpu_is_mx21() || cpu_is_mx27()) {
                 ret = request_irq(MX2x_INT_DMACH0 + channel,
                                 dma_irq_handler, 0, "DMA", NULL);
@@ -717,7 +710,6 @@ int imx_dma_request(int channel, const char *name)
                 imxdma->watchdog.function = &imx_dma_watchdog;
                 imxdma->watchdog.data = channel;
         }
-#endif
 
         return ret;
 }
@@ -744,10 +736,8 @@ void imx_dma_free(int channel)
         imx_dma_disable(channel);
         imxdma->name = NULL;
 
-#ifdef CONFIG_ARCH_MX2
         if (cpu_is_mx21() || cpu_is_mx27())
                 free_irq(MX2x_INT_DMACH0 + channel, NULL);
-#endif
 
         local_irq_restore(flags);
 }
@@ -803,21 +793,13 @@ static int __init imx_dma_init(void)
         int ret = 0;
         int i;
 
-#ifdef CONFIG_ARCH_MX1
         if (cpu_is_mx1())
                 imx_dmav1_baseaddr = MX1_IO_ADDRESS(MX1_DMA_BASE_ADDR);
-        else
-#endif
-#ifdef CONFIG_MACH_MX21
-        if (cpu_is_mx21())
+        else if (cpu_is_mx21())
                 imx_dmav1_baseaddr = MX21_IO_ADDRESS(MX21_DMA_BASE_ADDR);
-        else
-#endif
-#ifdef CONFIG_MACH_MX27
-        if (cpu_is_mx27())
+        else if (cpu_is_mx27())
                 imx_dmav1_baseaddr = MX27_IO_ADDRESS(MX27_DMA_BASE_ADDR);
         else
-#endif
                 return 0;
 
         dma_clk = clk_get(NULL, "dma");
@@ -828,7 +810,6 @@ static int __init imx_dma_init(void)
         /* reset DMA module */
         imx_dmav1_writel(DCR_DRST, DMA_DCR);
 
-#ifdef CONFIG_ARCH_MX1
         if (cpu_is_mx1()) {
                 ret = request_irq(MX1_DMA_INT, dma_irq_handler, 0, "DMA", NULL);
                 if (ret) {
@@ -843,7 +824,7 @@ static int __init imx_dma_init(void)
                         return ret;
                 }
         }
-#endif
+
         /* enable DMA module */
         imx_dmav1_writel(DCR_DEN, DMA_DCR);
 
diff --git a/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c
index 5911281da5f5..5db3e1463af7 100644
--- a/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c
+++ b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c
@@ -112,7 +112,7 @@ eukrea_mbimx27_keymap_data __initconst = {
         .keymap_size    = ARRAY_SIZE(eukrea_mbimx27_keymap),
 };
 
-static struct gpio_led gpio_leds[] = {
+static const struct gpio_led eukrea_mbimx27_gpio_leds[] __initconst = {
         {
                 .name                   = "led1",
                 .default_trigger        = "heartbeat",
@@ -127,17 +127,10 @@ static struct gpio_led gpio_leds[] = {
         },
 };
 
-static struct gpio_led_platform_data gpio_led_info = {
-        .leds           = gpio_leds,
-        .num_leds       = ARRAY_SIZE(gpio_leds),
-};
-
-static struct platform_device leds_gpio = {
-        .name   = "leds-gpio",
-        .id     = -1,
-        .dev    = {
-                .platform_data  = &gpio_led_info,
-        },
+static const struct gpio_led_platform_data
+                eukrea_mbimx27_gpio_led_info __initconst = {
+        .leds           = eukrea_mbimx27_gpio_leds,
+        .num_leds       = ARRAY_SIZE(eukrea_mbimx27_gpio_leds),
 };
 
 static struct imx_fb_videomode eukrea_mbimx27_modes[] = {
@@ -293,10 +286,6 @@ static struct i2c_board_info eukrea_mbimx27_i2c_devices[] = {
         },
 };
 
-static struct platform_device *platform_devices[] __initdata = {
-        &leds_gpio,
-};
-
 static const struct imxmmc_platform_data sdhc_pdata __initconst = {
         .dat3_card_detect = 1,
 };
@@ -377,5 +366,5 @@ void __init eukrea_mbimx27_baseboard_init(void)
 
         imx27_add_imx_keypad(&eukrea_mbimx27_keymap_data);
 
-        platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+        gpio_led_register_device(-1, &eukrea_mbimx27_gpio_led_info);
 }
diff --git a/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c b/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c
index f9ef04acdab1..01ebcb31e482 100644
--- a/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c
+++ b/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c
@@ -173,7 +173,7 @@ static struct platform_device eukrea_mbimxsd_lcd_powerdev = {
         .dev.platform_data      = &eukrea_mbimxsd_lcd_power_data,
 };
 
-static struct gpio_led eukrea_mbimxsd_leds[] = {
+static const struct gpio_led eukrea_mbimxsd_leds[] __initconst = {
         {
                 .name                   = "led1",
                 .default_trigger        = "heartbeat",
@@ -182,19 +182,12 @@ static struct gpio_led eukrea_mbimxsd_leds[] = {
         },
 };
 
-static struct gpio_led_platform_data eukrea_mbimxsd_led_info = {
+static const struct gpio_led_platform_data
+                eukrea_mbimxsd_led_info __initconst = {
         .leds           = eukrea_mbimxsd_leds,
         .num_leds       = ARRAY_SIZE(eukrea_mbimxsd_leds),
 };
 
-static struct platform_device eukrea_mbimxsd_leds_gpio = {
-        .name   = "leds-gpio",
-        .id     = -1,
-        .dev    = {
-                .platform_data  = &eukrea_mbimxsd_led_info,
-        },
-};
-
 static struct gpio_keys_button eukrea_mbimxsd_gpio_buttons[] = {
         {
                 .gpio           = GPIO_SWITCH1,
@@ -212,7 +205,6 @@ static const struct gpio_keys_platform_data
 };
 
 static struct platform_device *platform_devices[] __initdata = {
-        &eukrea_mbimxsd_leds_gpio,
         &eukrea_mbimxsd_lcd_powerdev,
 };
 
@@ -287,5 +279,6 @@ void __init eukrea_mbimxsd25_baseboard_init(void)
                                 ARRAY_SIZE(eukrea_mbimxsd_i2c_devices));
 
         platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+        gpio_led_register_device(-1, &eukrea_mbimxsd_led_info);
         imx_add_gpio_keys(&eukrea_mbimxsd_button_data);
 }
diff --git a/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c b/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c
index 4909ea05855a..558eb526ba56 100644
--- a/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c
+++ b/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c
@@ -193,19 +193,12 @@ static struct gpio_led eukrea_mbimxsd_leds[] = {
         },
 };
 
-static struct gpio_led_platform_data eukrea_mbimxsd_led_info = {
+static const struct gpio_led_platform_data
+                eukrea_mbimxsd_led_info __initconst = {
         .leds           = eukrea_mbimxsd_leds,
         .num_leds       = ARRAY_SIZE(eukrea_mbimxsd_leds),
 };
 
-static struct platform_device eukrea_mbimxsd_leds_gpio = {
-        .name   = "leds-gpio",
-        .id     = -1,
-        .dev    = {
-                .platform_data  = &eukrea_mbimxsd_led_info,
-        },
-};
-
 static struct gpio_keys_button eukrea_mbimxsd_gpio_buttons[] = {
         {
                 .gpio           = GPIO_SWITCH1,
@@ -223,7 +216,6 @@ static const struct gpio_keys_platform_data
 };
 
 static struct platform_device *platform_devices[] __initdata = {
-        &eukrea_mbimxsd_leds_gpio,
         &eukrea_mbimxsd_lcd_powerdev,
 };
 
@@ -299,5 +291,6 @@ void __init eukrea_mbimxsd35_baseboard_init(void)
                                 ARRAY_SIZE(eukrea_mbimxsd_i2c_devices));
 
         platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+        gpio_led_register_device(-1, &eukrea_mbimxsd_led_info);
         imx_add_gpio_keys(&eukrea_mbimxsd_button_data);
 }
diff --git a/arch/arm/mach-imx/mach-apf9328.c b/arch/arm/mach-imx/mach-apf9328.c
index 59d2a3b137d9..a404c89485ca 100644
--- a/arch/arm/mach-imx/mach-apf9328.c
+++ b/arch/arm/mach-imx/mach-apf9328.c
@@ -99,11 +99,6 @@ static struct platform_device dm9000x_device = {
         }
 };
 
-/* --- SERIAL RESSOURCE --- */
-static const struct imxuart_platform_data uart0_pdata __initconst = {
-        .flags = 0,
-};
-
 static const struct imxuart_platform_data uart1_pdata __initconst = {
         .flags = IMXUART_HAVE_RTSCTS,
 };
@@ -121,7 +116,7 @@ static void __init apf9328_init(void)
                         ARRAY_SIZE(apf9328_pins),
                         "APF9328");
 
-        imx1_add_imx_uart0(&uart0_pdata);
+        imx1_add_imx_uart0(NULL);
         imx1_add_imx_uart1(&uart1_pdata);
 
         platform_add_devices(devices, ARRAY_SIZE(devices));
diff --git a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
index c6269d60ddbc..6707de0ab716 100644
--- a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
+++ b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
@@ -34,7 +34,7 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 #include <mach/common.h>
-#include <mach/iomux.h>
+#include <mach/iomux-mx27.h>
 
 #include "devices-imx27.h"
 
diff --git a/arch/arm/mach-imx/mach-mx27_3ds.c b/arch/arm/mach-imx/mach-mx27_3ds.c
index 117ce0a50f4e..b31d4129e10e 100644
--- a/arch/arm/mach-imx/mach-mx27_3ds.c
+++ b/arch/arm/mach-imx/mach-mx27_3ds.c
@@ -42,10 +42,12 @@
 
 #include "devices-imx27.h"
 
-#define SD1_EN_GPIO (GPIO_PORTB + 25)
-#define OTG_PHY_RESET_GPIO (GPIO_PORTB + 23)
-#define SPI2_SS0 (GPIO_PORTD + 21)
-#define EXPIO_PARENT_INT        (MXC_INTERNAL_IRQS + GPIO_PORTC + 28)
+#define SD1_EN_GPIO             IMX_GPIO_NR(2, 25)
+#define OTG_PHY_RESET_GPIO      IMX_GPIO_NR(2, 23)
+#define SPI2_SS0                IMX_GPIO_NR(4, 21)
+#define EXPIO_PARENT_INT        gpio_to_irq(IMX_GPIO_NR(3, 28))
+#define PMIC_INT                IMX_GPIO_NR(3, 14)
+#define SD1_CD                  IMX_GPIO_NR(2, 26)
 
 static const int mx27pdk_pins[] __initconst = {
         /* UART1 */
@@ -98,9 +100,12 @@ static const int mx27pdk_pins[] __initconst = {
         PD22_PF_CSPI2_SCLK,
         PD23_PF_CSPI2_MISO,
         PD24_PF_CSPI2_MOSI,
+        SPI2_SS0 | GPIO_GPIO | GPIO_OUT,
         /* I2C1 */
         PD17_PF_I2C_DATA,
         PD18_PF_I2C_CLK,
+        /* PMIC INT */
+        PMIC_INT | GPIO_GPIO | GPIO_IN,
 };
 
 static const struct imxuart_platform_data uart_pdata __initconst = {
@@ -131,13 +136,13 @@ static const struct matrix_keymap_data mx27_3ds_keymap_data __initconst = {
 static int mx27_3ds_sdhc1_init(struct device *dev, irq_handler_t detect_irq,
                                 void *data)
 {
-        return request_irq(IRQ_GPIOB(26), detect_irq, IRQF_TRIGGER_FALLING |
-                        IRQF_TRIGGER_RISING, "sdhc1-card-detect", data);
+        return request_irq(gpio_to_irq(SD1_CD), detect_irq,
+        IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING, "sdhc1-card-detect", data);
 }
 
 static void mx27_3ds_sdhc1_exit(struct device *dev, void *data)
 {
-        free_irq(IRQ_GPIOB(26), data);
+        free_irq(gpio_to_irq(SD1_CD), data);
 }
 
 static const struct imxmmc_platform_data sdhc1_pdata __initconst = {
@@ -193,6 +198,13 @@ static int __init mx27_3ds_otg_mode(char *options)
 __setup("otg_mode=", mx27_3ds_otg_mode);
 
 /* Regulators */
+static struct regulator_init_data gpo_init = {
+        .constraints = {
+                .boot_on = 1,
+                .always_on = 1,
+        }
+};
+
 static struct regulator_consumer_supply vmmc1_consumers[] = {
         REGULATOR_SUPPLY("lcd_2v8", NULL),
 };
@@ -201,7 +213,9 @@ static struct regulator_init_data vmmc1_init = {
         .constraints = {
                 .min_uV = 2800000,
                 .max_uV = 2800000,
-                .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+                .apply_uV = 1,
+                .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+                                  REGULATOR_CHANGE_STATUS,
         },
         .num_consumer_supplies = ARRAY_SIZE(vmmc1_consumers),
         .consumer_supplies = vmmc1_consumers,
@@ -228,6 +242,12 @@ static struct mc13xxx_regulator_init_data mx27_3ds_regulators[] = {
         }, {
                 .id = MC13783_REG_VGEN,
                 .init_data = &vgen_init,
+        }, {
+                .id = MC13783_REG_GPO1, /* Turn on 1.8V */
+                .init_data = &gpo_init,
+        }, {
+                .id = MC13783_REG_GPO3, /* Turn on 3.3V */
+                .init_data = &gpo_init,
         },
 };
 
@@ -242,11 +262,11 @@ static struct mc13xxx_platform_data mc13783_pdata = {
 };
 
 /* SPI */
-static int spi2_internal_chipselect[] = {SPI2_SS0};
+static int spi2_chipselect[] = {SPI2_SS0};
 
 static const struct spi_imx_master spi2_pdata __initconst = {
-        .chipselect     = spi2_internal_chipselect,
-        .num_chipselect = ARRAY_SIZE(spi2_internal_chipselect),
+        .chipselect     = spi2_chipselect,
+        .num_chipselect = ARRAY_SIZE(spi2_chipselect),
 };
 
 static struct spi_board_info mx27_3ds_spi_devs[] __initdata = {
@@ -256,7 +276,7 @@ static struct spi_board_info mx27_3ds_spi_devs[] __initdata = {
                 .bus_num        = 1,
                 .chip_select    = 0, /* SS0 */
                 .platform_data  = &mc13783_pdata,
-                .irq = IRQ_GPIOC(14),
+                .irq = gpio_to_irq(PMIC_INT),
                 .mode = SPI_CS_HIGH,
         },
 };
diff --git a/arch/arm/mach-imx/mach-mx31_3ds.c b/arch/arm/mach-imx/mach-mx31_3ds.c
index ab2a6268b50b..1446b353af05 100644
--- a/arch/arm/mach-imx/mach-mx31_3ds.c
+++ b/arch/arm/mach-imx/mach-mx31_3ds.c
@@ -53,11 +53,8 @@ static int mx31_3ds_pins[] = {
         MX31_PIN_RXD1__RXD1,
         IOMUX_MODE(MX31_PIN_GPIO1_1, IOMUX_CONFIG_GPIO),
         /*SPI0*/
-        MX31_PIN_CSPI1_SCLK__SCLK,
-        MX31_PIN_CSPI1_MOSI__MOSI,
-        MX31_PIN_CSPI1_MISO__MISO,
-        MX31_PIN_CSPI1_SPI_RDY__SPI_RDY,
-        MX31_PIN_CSPI1_SS2__SS2, /* CS for LCD */
+        IOMUX_MODE(MX31_PIN_DSR_DCE1, IOMUX_CONFIG_ALT1),
+        IOMUX_MODE(MX31_PIN_RI_DCE1, IOMUX_CONFIG_ALT1),
         /* SPI 1 */
         MX31_PIN_CSPI2_SCLK__SCLK,
         MX31_PIN_CSPI2_MOSI__MOSI,
@@ -691,6 +688,9 @@ static void __init mx31_3ds_init(void)
 
         imx31_soc_init();
 
+        /* Configure SPI1 IOMUX */
+        mxc_iomux_set_gpr(MUX_PGP_CSPI_BB, true);
+
         mxc_iomux_setup_multiple_pins(mx31_3ds_pins, ARRAY_SIZE(mx31_3ds_pins),
                                       "mx31_3ds");
 
diff --git a/arch/arm/mach-imx/mach-mx31moboard.c b/arch/arm/mach-imx/mach-mx31moboard.c
index a52fd36e2b52..b358383120e7 100644
--- a/arch/arm/mach-imx/mach-mx31moboard.c
+++ b/arch/arm/mach-imx/mach-mx31moboard.c
@@ -425,7 +425,7 @@ static int __init moboard_usbh2_init(void)
         return 0;
 }
 
-static struct gpio_led mx31moboard_leds[] = {
+static const struct gpio_led mx31moboard_leds[] __initconst = {
         {
                 .name   = "coreboard-led-0:red:running",
                 .default_trigger = "heartbeat",
@@ -442,26 +442,17 @@ static struct gpio_led mx31moboard_leds[] = {
         },
 };
 
-static struct gpio_led_platform_data mx31moboard_led_pdata = {
+static const struct gpio_led_platform_data mx31moboard_led_pdata __initconst = {
         .num_leds       = ARRAY_SIZE(mx31moboard_leds),
         .leds           = mx31moboard_leds,
 };
 
-static struct platform_device mx31moboard_leds_device = {
-        .name   = "leds-gpio",
-        .id     = -1,
-        .dev    = {
-                .platform_data = &mx31moboard_led_pdata,
-        },
-};
-
 static const struct ipu_platform_data mx3_ipu_data __initconst = {
         .irq_base = MXC_IPU_IRQ_START,
 };
 
 static struct platform_device *devices[] __initdata = {
         &mx31moboard_flash,
-        &mx31moboard_leds_device,
 };
 
 static struct mx3_camera_pdata camera_pdata __initdata = {
@@ -513,6 +504,7 @@ static void __init mx31moboard_init(void)
                 "moboard");
 
         platform_add_devices(devices, ARRAY_SIZE(devices));
+        gpio_led_register_device(-1, &mx31moboard_led_pdata);
 
         imx31_add_imx_uart0(&uart0_pdata);
         imx31_add_imx_uart4(&uart4_pdata);
diff --git a/arch/arm/mach-imx/mach-mx35_3ds.c b/arch/arm/mach-imx/mach-mx35_3ds.c
index 48b3c6fd5cf0..b3b9bd8ac2a3 100644
--- a/arch/arm/mach-imx/mach-mx35_3ds.c
+++ b/arch/arm/mach-imx/mach-mx35_3ds.c
@@ -43,7 +43,7 @@
 
 #include "devices-imx35.h"
 
-#define EXPIO_PARENT_INT        (MXC_INTERNAL_IRQS + GPIO_PORTA + 1)
+#define EXPIO_PARENT_INT        gpio_to_irq(IMX_GPIO_NR(1, 1))
 
 static const struct imxuart_platform_data uart_pdata __initconst = {
         .flags = IMXUART_HAVE_RTSCTS,
diff --git a/arch/arm/mach-imx/mach-scb9328.c b/arch/arm/mach-imx/mach-scb9328.c
index 82805260e19c..db2d60470e15 100644
--- a/arch/arm/mach-imx/mach-scb9328.c
+++ b/arch/arm/mach-imx/mach-scb9328.c
@@ -101,21 +101,7 @@ static const int mxc_uart1_pins[] = {
         PC12_PF_UART1_RXD,
 };
 
-static int uart1_mxc_init(struct platform_device *pdev)
-{
-        return mxc_gpio_setup_multiple_pins(mxc_uart1_pins,
-                        ARRAY_SIZE(mxc_uart1_pins), "UART1");
-}
-
-static void uart1_mxc_exit(struct platform_device *pdev)
-{
-        mxc_gpio_release_multiple_pins(mxc_uart1_pins,
-                        ARRAY_SIZE(mxc_uart1_pins));
-}
-
 static const struct imxuart_platform_data uart_pdata __initconst = {
-        .init = uart1_mxc_init,
-        .exit = uart1_mxc_exit,
         .flags = IMXUART_HAVE_RTSCTS,
 };
 
@@ -131,6 +117,9 @@ static void __init scb9328_init(void)
 {
         imx1_soc_init();
 
+        mxc_gpio_setup_multiple_pins(mxc_uart1_pins,
+                        ARRAY_SIZE(mxc_uart1_pins), "UART1");
+
         imx1_add_imx_uart0(&uart_pdata);
 
         printk(KERN_INFO"Scb9328: Adding devices\n");
diff --git a/arch/arm/mach-imx/mx31lite-db.c b/arch/arm/mach-imx/mx31lite-db.c
index 5aa053edc17c..bf0fb87946ba 100644
--- a/arch/arm/mach-imx/mx31lite-db.c
+++ b/arch/arm/mach-imx/mx31lite-db.c
@@ -161,7 +161,7 @@ static const struct spi_imx_master spi0_pdata __initconst = {
 
 /* GPIO LEDs */
 
-static struct gpio_led litekit_leds[] = {
+static const struct gpio_led litekit_leds[] __initconst = {
         {
                 .name           = "GPIO0",
                 .gpio           = IOMUX_TO_GPIO(MX31_PIN_COMPARE),
@@ -176,19 +176,12 @@ static struct gpio_led litekit_leds[] = {
         }
 };
 
-static struct gpio_led_platform_data litekit_led_platform_data = {
+static const struct gpio_led_platform_data
+                litekit_led_platform_data __initconst = {
         .leds           = litekit_leds,
         .num_leds       = ARRAY_SIZE(litekit_leds),
 };
 
-static struct platform_device litekit_led_device = {
-        .name   = "leds-gpio",
-        .id     = -1,
-        .dev    = {
-                .platform_data = &litekit_led_platform_data,
-        },
-};
-
 void __init mx31lite_db_init(void)
 {
         mxc_iomux_setup_multiple_pins(litekit_db_board_pins,
@@ -197,7 +190,7 @@ void __init mx31lite_db_init(void)
         imx31_add_imx_uart0(&uart_pdata);
         imx31_add_mxc_mmc(0, &mmc_pdata);
         imx31_add_spi_imx0(&spi0_pdata);
-        platform_device_register(&litekit_led_device);
+        gpio_led_register_device(-1, &litekit_led_platform_data);
         imx31_add_imx2_wdt(NULL);
         imx31_add_mxc_rtc(NULL);
 }
diff --git a/arch/arm/mach-msm/timer.c b/arch/arm/mach-msm/timer.c
index 38b95e949d13..63621f152c98 100644
--- a/arch/arm/mach-msm/timer.c
+++ b/arch/arm/mach-msm/timer.c
@@ -23,6 +23,8 @@
 #include <linux/io.h>
 
 #include <asm/mach/time.h>
+#include <asm/hardware/gic.h>
+
 #include <mach/msm_iomap.h>
 #include <mach/cpu.h>
 
@@ -55,10 +57,12 @@ enum timer_location {
 #if defined(CONFIG_ARCH_QSD8X50)
 #define DGT_HZ (19200000 / 4) /* 19.2 MHz / 4 by default */
 #define MSM_DGT_SHIFT (0)
-#elif defined(CONFIG_ARCH_MSM7X30) || defined(CONFIG_ARCH_MSM8X60) || \
-                                      defined(CONFIG_ARCH_MSM8960)
+#elif defined(CONFIG_ARCH_MSM7X30)
 #define DGT_HZ (24576000 / 4) /* 24.576 MHz (LPXO) / 4 by default */
 #define MSM_DGT_SHIFT (0)
+#elif defined(CONFIG_ARCH_MSM8X60) || defined(CONFIG_ARCH_MSM8960)
+#define DGT_HZ (27000000 / 4) /* 27 MHz (PXO) / 4 by default */
+#define MSM_DGT_SHIFT (0)
 #else
 #define DGT_HZ 19200000 /* 19.2 MHz or 600 KHz after shift */
 #define MSM_DGT_SHIFT (5)
@@ -100,7 +104,11 @@ static cycle_t msm_read_timer_count(struct clocksource *cs)
 {
         struct msm_clock *clk = container_of(cs, struct msm_clock, clocksource);
 
-        return readl(clk->global_counter);
+        /*
+         * Shift timer count down by a constant due to unreliable lower bits
+         * on some targets.
+         */
+        return readl(clk->global_counter) >> clk->shift;
 }
 
 static struct msm_clock *clockevent_to_clock(struct clock_event_device *evt)
diff --git a/arch/arm/mach-mx5/Kconfig b/arch/arm/mach-mx5/Kconfig
index 799fbc40e53c..f25e9d7bf0f5 100644
--- a/arch/arm/mach-mx5/Kconfig
+++ b/arch/arm/mach-mx5/Kconfig
@@ -109,6 +109,7 @@ config MACH_EUKREA_MBIMX51_BASEBOARD
         bool
         select IMX_HAVE_PLATFORM_IMX_KEYPAD
         select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+        select LEDS_GPIO_REGISTER
         help
           This adds board specific devices that can be found on Eukrea's
           MBIMX51 evaluation board.
@@ -135,6 +136,7 @@ config MACH_EUKREA_MBIMXSD51_BASEBOARD
         prompt "Eukrea MBIMXSD development board"
         bool
         select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+        select LEDS_GPIO_REGISTER
         help
           This adds board specific devices that can be found on Eukrea's
           MBIMXSD evaluation board.
@@ -151,6 +153,7 @@ config MX51_EFIKA_COMMON
 
 config MACH_MX51_EFIKAMX
         bool "Support MX51 Genesi Efika MX nettop"
+        select LEDS_GPIO_REGISTER
         select MX51_EFIKA_COMMON
         help
           Include support for Genesi Efika MX nettop. This includes specific
@@ -158,6 +161,7 @@ config MACH_MX51_EFIKAMX
 
 config MACH_MX51_EFIKASB
         bool "Support MX51 Genesi Efika Smartbook"
+        select LEDS_GPIO_REGISTER
         select MX51_EFIKA_COMMON
         help
           Include support for Genesi Efika Smartbook. This includes specific
diff --git a/arch/arm/mach-mx5/board-cpuimx51.c b/arch/arm/mach-mx5/board-cpuimx51.c
index add0d42de7af..7c893fa70266 100644
--- a/arch/arm/mach-mx5/board-cpuimx51.c
+++ b/arch/arm/mach-mx5/board-cpuimx51.c
@@ -43,10 +43,6 @@
 #define CPUIMX51_QUARTB_GPIO    IMX_GPIO_NR(3, 25)
 #define CPUIMX51_QUARTC_GPIO    IMX_GPIO_NR(3, 26)
 #define CPUIMX51_QUARTD_GPIO    IMX_GPIO_NR(3, 27)
-#define CPUIMX51_QUARTA_IRQ     (MXC_INTERNAL_IRQS + CPUIMX51_QUARTA_GPIO)
-#define CPUIMX51_QUARTB_IRQ     (MXC_INTERNAL_IRQS + CPUIMX51_QUARTB_GPIO)
-#define CPUIMX51_QUARTC_IRQ     (MXC_INTERNAL_IRQS + CPUIMX51_QUARTC_GPIO)
-#define CPUIMX51_QUARTD_IRQ     (MXC_INTERNAL_IRQS + CPUIMX51_QUARTD_GPIO)
 #define CPUIMX51_QUART_XTAL     14745600
 #define CPUIMX51_QUART_REGSHIFT 17
 
@@ -61,7 +57,7 @@
 static struct plat_serial8250_port serial_platform_data[] = {
         {
                 .mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x400000),
-                .irq = CPUIMX51_QUARTA_IRQ,
+                .irq = gpio_to_irq(CPUIMX51_QUARTA_GPIO),
                 .irqflags = IRQF_TRIGGER_HIGH,
                 .uartclk = CPUIMX51_QUART_XTAL,
                 .regshift = CPUIMX51_QUART_REGSHIFT,
@@ -69,7 +65,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
                 .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
         }, {
                 .mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x800000),
-                .irq = CPUIMX51_QUARTB_IRQ,
+                .irq = gpio_to_irq(CPUIMX51_QUARTB_GPIO),
                 .irqflags = IRQF_TRIGGER_HIGH,
                 .uartclk = CPUIMX51_QUART_XTAL,
                 .regshift = CPUIMX51_QUART_REGSHIFT,
@@ -77,7 +73,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
                 .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
         }, {
                 .mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x1000000),
-                .irq = CPUIMX51_QUARTC_IRQ,
+                .irq = gpio_to_irq(CPUIMX51_QUARTC_GPIO),
                 .irqflags = IRQF_TRIGGER_HIGH,
                 .uartclk = CPUIMX51_QUART_XTAL,
                 .regshift = CPUIMX51_QUART_REGSHIFT,
@@ -85,7 +81,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
                 .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
         }, {
                 .mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x2000000),
-                .irq = CPUIMX51_QUARTD_IRQ,
+                .irq = irq_to_gpio(CPUIMX51_QUARTD_GPIO),
                 .irqflags = IRQF_TRIGGER_HIGH,
                 .uartclk = CPUIMX51_QUART_XTAL,
                 .regshift = CPUIMX51_QUART_REGSHIFT,
diff --git a/arch/arm/mach-mx5/board-mx51_3ds.c b/arch/arm/mach-mx5/board-mx51_3ds.c
index 3112d15feebc..07a38154da21 100644
--- a/arch/arm/mach-mx5/board-mx51_3ds.c
+++ b/arch/arm/mach-mx5/board-mx51_3ds.c
@@ -13,6 +13,7 @@
 #include <linux/irq.h>
 #include <linux/platform_device.h>
 #include <linux/spi/spi.h>
+#include <linux/gpio.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -26,7 +27,7 @@
 #include "devices-imx51.h"
 #include "devices.h"
 
-#define EXPIO_PARENT_INT        (MXC_INTERNAL_IRQS + GPIO_PORTA + 6)
+#define EXPIO_PARENT_INT        gpio_to_irq(IMX_GPIO_NR(1, 6))
 #define MX51_3DS_ECSPI2_CS      (GPIO_PORTC + 28)
 
 static iomux_v3_cfg_t mx51_3ds_pads[] = {
diff --git a/arch/arm/mach-mx5/board-mx51_babbage.c b/arch/arm/mach-mx5/board-mx51_babbage.c
index 6021dd00ec75..e54e4bf61cfd 100644
--- a/arch/arm/mach-mx5/board-mx51_babbage.c
+++ b/arch/arm/mach-mx5/board-mx51_babbage.c
@@ -36,7 +36,7 @@
 
 #define BABBAGE_USB_HUB_RESET   IMX_GPIO_NR(1, 7)
 #define BABBAGE_USBH1_STP       IMX_GPIO_NR(1, 27)
-#define BABBAGE_PHY_RESET       IMX_GPIO_NR(2, 5)
+#define BABBAGE_USB_PHY_RESET   IMX_GPIO_NR(2, 5)
 #define BABBAGE_FEC_PHY_RESET   IMX_GPIO_NR(2, 14)
 #define BABBAGE_POWER_KEY       IMX_GPIO_NR(2, 21)
 #define BABBAGE_ECSPI1_CS0      IMX_GPIO_NR(4, 24)
@@ -110,6 +110,9 @@ static iomux_v3_cfg_t mx51babbage_pads[] = {
         /* USB HUB reset line*/
         MX51_PAD_GPIO1_7__GPIO1_7,
 
+        /* USB PHY reset line */
+        MX51_PAD_EIM_D21__GPIO2_5,
+
         /* FEC */
         MX51_PAD_EIM_EB2__FEC_MDIO,
         MX51_PAD_EIM_EB3__FEC_RDATA1,
@@ -169,34 +172,31 @@ static struct imxi2c_platform_data babbage_hsi2c_data = {
         .bitrate = 400000,
 };
 
+static struct gpio mx51_babbage_usbh1_gpios[] = {
+        { BABBAGE_USBH1_STP, GPIOF_OUT_INIT_LOW, "usbh1_stp" },
+        { BABBAGE_USB_PHY_RESET, GPIOF_OUT_INIT_LOW, "usbh1_phy_reset" },
+};
+
 static int gpio_usbh1_active(void)
 {
         iomux_v3_cfg_t usbh1stp_gpio = MX51_PAD_USBH1_STP__GPIO1_27;
-        iomux_v3_cfg_t phyreset_gpio = MX51_PAD_EIM_D21__GPIO2_5;
         int ret;
 
         /* Set USBH1_STP to GPIO and toggle it */
         mxc_iomux_v3_setup_pad(usbh1stp_gpio);
-        ret = gpio_request(BABBAGE_USBH1_STP, "usbh1_stp");
+        ret = gpio_request_array(mx51_babbage_usbh1_gpios,
+                                        ARRAY_SIZE(mx51_babbage_usbh1_gpios));
 
         if (ret) {
-                pr_debug("failed to get MX51_PAD_USBH1_STP__GPIO_1_27: %d\n", ret);
+                pr_debug("failed to get USBH1 pins: %d\n", ret);
                 return ret;
         }
-        gpio_direction_output(BABBAGE_USBH1_STP, 0);
-        gpio_set_value(BABBAGE_USBH1_STP, 1);
-        msleep(100);
-        gpio_free(BABBAGE_USBH1_STP);
-
-        /* De-assert USB PHY RESETB */
-        mxc_iomux_v3_setup_pad(phyreset_gpio);
-        ret = gpio_request(BABBAGE_PHY_RESET, "phy_reset");
 
-        if (ret) {
-                pr_debug("failed to get MX51_PAD_EIM_D21__GPIO_2_5: %d\n", ret);
-                return ret;
-        }
-        gpio_direction_output(BABBAGE_PHY_RESET, 1);
+        msleep(100);
+        gpio_set_value(BABBAGE_USBH1_STP, 1);
+        gpio_set_value(BABBAGE_USB_PHY_RESET, 1);
+        gpio_free_array(mx51_babbage_usbh1_gpios,
+                                        ARRAY_SIZE(mx51_babbage_usbh1_gpios));
         return 0;
 }
 
diff --git a/arch/arm/mach-mx5/board-mx51_efikamx.c b/arch/arm/mach-mx5/board-mx51_efikamx.c
index 3be603b9075a..f70700dc0ec1 100644
--- a/arch/arm/mach-mx5/board-mx51_efikamx.c
+++ b/arch/arm/mach-mx5/board-mx51_efikamx.c
@@ -139,7 +139,7 @@ static void __init mx51_efikamx_board_id(void)
         }
 }
 
-static struct gpio_led mx51_efikamx_leds[] = {
+static struct gpio_led mx51_efikamx_leds[] __initdata = {
         {
                 .name = "efikamx:green",
                 .default_trigger = "default-on",
@@ -157,19 +157,12 @@ static struct gpio_led mx51_efikamx_leds[] = {
         },
 };
 
-static struct gpio_led_platform_data mx51_efikamx_leds_data = {
+static const struct gpio_led_platform_data
+                mx51_efikamx_leds_data __initconst = {
         .leds = mx51_efikamx_leds,
         .num_leds = ARRAY_SIZE(mx51_efikamx_leds),
 };
 
-static struct platform_device mx51_efikamx_leds_device = {
-        .name = "leds-gpio",
-        .id = -1,
-        .dev = {
-                .platform_data = &mx51_efikamx_leds_data,
-        },
-};
-
 static struct gpio_keys_button mx51_efikamx_powerkey[] = {
         {
                 .code = KEY_POWER,
@@ -250,7 +243,7 @@ static void __init mx51_efikamx_init(void)
                 mx51_efikamx_leds[2].default_trigger = "mmc1";
         }
 
-        platform_device_register(&mx51_efikamx_leds_device);
+        gpio_led_register_device(-1, &mx51_efikamx_leds_data);
         imx_add_gpio_keys(&mx51_efikamx_powerkey_data);
 
         if (system_rev == 0x11) {
diff --git a/arch/arm/mach-mx5/board-mx51_efikasb.c b/arch/arm/mach-mx5/board-mx51_efikasb.c
index 4b2e522de0f8..2e4d9d32a87c 100644
--- a/arch/arm/mach-mx5/board-mx51_efikasb.c
+++ b/arch/arm/mach-mx5/board-mx51_efikasb.c
@@ -132,7 +132,7 @@ static void __init mx51_efikasb_usb(void)
                 mxc_register_device(&mxc_usbh2_device, &usbh2_config);
 }
 
-static struct gpio_led mx51_efikasb_leds[] = {
+static const struct gpio_led mx51_efikasb_leds[] __initconst = {
         {
                 .name = "efikasb:green",
                 .default_trigger = "default-on",
@@ -146,19 +146,12 @@ static struct gpio_led mx51_efikasb_leds[] = {
         },
 };
 
-static struct gpio_led_platform_data mx51_efikasb_leds_data = {
+static const struct gpio_led_platform_data
+                mx51_efikasb_leds_data __initconst = {
         .leds = mx51_efikasb_leds,
         .num_leds = ARRAY_SIZE(mx51_efikasb_leds),
 };
 
-static struct platform_device mx51_efikasb_leds_device = {
-        .name = "leds-gpio",
-        .id = -1,
-        .dev = {
-                .platform_data = &mx51_efikasb_leds_data,
-        },
-};
-
 static struct gpio_keys_button mx51_efikasb_keys[] = {
         {
                 .code = KEY_POWER,
@@ -258,9 +251,8 @@ static void __init efikasb_board_init(void)
         mx51_efikasb_usb();
         imx51_add_sdhci_esdhc_imx(1, NULL);
 
-        platform_device_register(&mx51_efikasb_leds_device);
+        gpio_led_register_device(-1, &mx51_efikasb_leds_data);
         imx_add_gpio_keys(&mx51_efikasb_keys_data);
-
 }
 
 static void __init mx51_efikasb_timer_init(void)
diff --git a/arch/arm/mach-mx5/clock-mx51-mx53.c b/arch/arm/mach-mx5/clock-mx51-mx53.c
index 6b89c1bf4eb2..cea2bba06d0b 100644
--- a/arch/arm/mach-mx5/clock-mx51-mx53.c
+++ b/arch/arm/mach-mx5/clock-mx51-mx53.c
@@ -1274,9 +1274,9 @@ DEFINE_CLOCK(pwm2_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG8_OFFSET,
 
 /* I2C */
 DEFINE_CLOCK(i2c1_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG9_OFFSET,
-        NULL, NULL, &ipg_clk, NULL);
+        NULL, NULL, &ipg_perclk, NULL);
 DEFINE_CLOCK(i2c2_clk, 1, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG10_OFFSET,
-        NULL, NULL, &ipg_clk, NULL);
+        NULL, NULL, &ipg_perclk, NULL);
 DEFINE_CLOCK(hsi2c_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG11_OFFSET,
         NULL, NULL, &ipg_clk, NULL);
 
diff --git a/arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c b/arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c
index 97292d20f1f3..bbf4564bd050 100644
--- a/arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c
+++ b/arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c
@@ -31,13 +31,12 @@
 #include "devices.h"
 
 #define MBIMX51_TSC2007_GPIO    IMX_GPIO_NR(3, 30)
-#define MBIMX51_TSC2007_IRQ     (MXC_INTERNAL_IRQS + MBIMX51_TSC2007_GPIO)
 #define MBIMX51_LED0            IMX_GPIO_NR(3, 5)
 #define MBIMX51_LED1            IMX_GPIO_NR(3, 6)
 #define MBIMX51_LED2            IMX_GPIO_NR(3, 7)
 #define MBIMX51_LED3            IMX_GPIO_NR(3, 8)
 
-static struct gpio_led mbimx51_leds[] = {
+static const struct gpio_led mbimx51_leds[] __initconst = {
         {
                 .name                   = "led0",
                 .default_trigger        = "heartbeat",
@@ -64,23 +63,11 @@ static struct gpio_led mbimx51_leds[] = {
         },
 };
 
-static struct gpio_led_platform_data mbimx51_leds_info = {
+static const struct gpio_led_platform_data mbimx51_leds_info __initconst = {
         .leds           = mbimx51_leds,
         .num_leds       = ARRAY_SIZE(mbimx51_leds),
 };
 
-static struct platform_device mbimx51_leds_gpio = {
-        .name   = "leds-gpio",
-        .id     = -1,
-        .dev    = {
-                .platform_data  = &mbimx51_leds_info,
-        },
-};
-
-static struct platform_device *devices[] __initdata = {
-        &mbimx51_leds_gpio,
-};
-
 static iomux_v3_cfg_t mbimx51_pads[] = {
         /* UART2 */
         MX51_PAD_UART2_RXD__UART2_RXD,
@@ -173,7 +160,7 @@ struct tsc2007_platform_data tsc2007_data = {
 static struct i2c_board_info mbimx51_i2c_devices[] = {
         {
                 I2C_BOARD_INFO("tsc2007", 0x49),
-                .irq  = MBIMX51_TSC2007_IRQ,
+                .irq  = gpio_to_irq(MBIMX51_TSC2007_GPIO),
                 .platform_data = &tsc2007_data,
         }, {
                 I2C_BOARD_INFO("tlv320aic23", 0x1a),
@@ -204,13 +191,14 @@ void __init eukrea_mbimx51_baseboard_init(void)
         gpio_direction_output(MBIMX51_LED3, 1);
         gpio_free(MBIMX51_LED3);
 
-        platform_add_devices(devices, ARRAY_SIZE(devices));
+        gpio_led_register_device(-1, &mbimx51_leds_info);
 
         imx51_add_imx_keypad(&mbimx51_map_data);
 
         gpio_request(MBIMX51_TSC2007_GPIO, "tsc2007_irq");
         gpio_direction_input(MBIMX51_TSC2007_GPIO);
-        irq_set_irq_type(MBIMX51_TSC2007_IRQ, IRQF_TRIGGER_FALLING);
+        irq_set_irq_type(gpio_to_irq(MBIMX51_TSC2007_GPIO),
+                                        IRQF_TRIGGER_FALLING);
         i2c_register_board_info(1, mbimx51_i2c_devices,
                                 ARRAY_SIZE(mbimx51_i2c_devices));
 
diff --git a/arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c b/arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c
index 31c871ec46a6..261923997643 100644
--- a/arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c
+++ b/arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c
@@ -74,7 +74,7 @@ static iomux_v3_cfg_t eukrea_mbimxsd_pads[] = {
 #define GPIO_LED1       IMX_GPIO_NR(3, 30)
 #define GPIO_SWITCH1    IMX_GPIO_NR(3, 31)
 
-static struct gpio_led eukrea_mbimxsd_leds[] = {
+static const struct gpio_led eukrea_mbimxsd_leds[] __initconst = {
         {
                 .name                   = "led1",
                 .default_trigger        = "heartbeat",
@@ -83,19 +83,12 @@ static struct gpio_led eukrea_mbimxsd_leds[] = {
         },
 };
 
-static struct gpio_led_platform_data eukrea_mbimxsd_led_info = {
+static const struct gpio_led_platform_data
+                eukrea_mbimxsd_led_info __initconst = {
         .leds           = eukrea_mbimxsd_leds,
         .num_leds       = ARRAY_SIZE(eukrea_mbimxsd_leds),
 };
 
-static struct platform_device eukrea_mbimxsd_leds_gpio = {
-        .name   = "leds-gpio",
-        .id     = -1,
-        .dev    = {
-                .platform_data  = &eukrea_mbimxsd_led_info,
-        },
-};
-
 static struct gpio_keys_button eukrea_mbimxsd_gpio_buttons[] = {
         {
                 .gpio           = GPIO_SWITCH1,
@@ -112,10 +105,6 @@ static const struct gpio_keys_platform_data
         .nbuttons       = ARRAY_SIZE(eukrea_mbimxsd_gpio_buttons),
 };
 
-static struct platform_device *platform_devices[] __initdata = {
-        &eukrea_mbimxsd_leds_gpio,
-};
-
 static const struct imxuart_platform_data uart_pdata __initconst = {
         .flags = IMXUART_HAVE_RTSCTS,
 };
@@ -154,6 +143,6 @@ void __init eukrea_mbimxsd51_baseboard_init(void)
         i2c_register_board_info(0, eukrea_mbimxsd_i2c_devices,
                                 ARRAY_SIZE(eukrea_mbimxsd_i2c_devices));
 
-        platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+        gpio_led_register_device(-1, &eukrea_mbimxsd_led_info);
         imx_add_gpio_keys(&eukrea_mbimxsd_button_data);
 }
diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig
index f114960622e0..162b0b0bc356 100644
--- a/arch/arm/mach-mxs/Kconfig
+++ b/arch/arm/mach-mxs/Kconfig
@@ -55,6 +55,7 @@ config MACH_MX28EVK
 config MODULE_TX28
         bool
         select SOC_IMX28
+        select LEDS_GPIO_REGISTER
         select MXS_HAVE_AMBA_DUART
         select MXS_HAVE_PLATFORM_AUART
         select MXS_HAVE_PLATFORM_FEC
diff --git a/arch/arm/mach-mxs/devices/platform-mxsfb.c b/arch/arm/mach-mxs/devices/platform-mxsfb.c
index bf72c9b8dbdd..5a75b7180f74 100644
--- a/arch/arm/mach-mxs/devices/platform-mxsfb.c
+++ b/arch/arm/mach-mxs/devices/platform-mxsfb.c
@@ -5,6 +5,7 @@
  * the terms of the GNU General Public License version 2 as published by the
  * Free Software Foundation.
  */
+#include <linux/dma-mapping.h>
 #include <asm/sizes.h>
 #include <mach/mx23.h>
 #include <mach/mx28.h>
diff --git a/arch/arm/mach-mxs/mach-tx28.c b/arch/arm/mach-mxs/mach-tx28.c
index b65e3719cbc4..6766a12cca7f 100644
--- a/arch/arm/mach-mxs/mach-tx28.c
+++ b/arch/arm/mach-mxs/mach-tx28.c
@@ -101,14 +101,6 @@ static const iomux_cfg_t tx28_stk5v3_pads[] __initconst = {
                 (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
         MX28_PAD_SSP0_DATA3__SSP0_D3 |
                 (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-        MX28_PAD_SSP0_DATA4__SSP0_D4 |
-                (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-        MX28_PAD_SSP0_DATA5__SSP0_D5 |
-                (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-        MX28_PAD_SSP0_DATA6__SSP0_D6 |
-                (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
-        MX28_PAD_SSP0_DATA7__SSP0_D7 |
-                (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
         MX28_PAD_SSP0_CMD__SSP0_CMD |
                 (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
         MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT |
@@ -117,7 +109,7 @@ static const iomux_cfg_t tx28_stk5v3_pads[] __initconst = {
                 (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
 };
 
-static struct gpio_led tx28_stk5v3_leds[] = {
+static const struct gpio_led tx28_stk5v3_leds[] __initconst = {
         {
                 .name = "GPIO-LED",
                 .default_trigger = "heartbeat",
@@ -159,8 +151,7 @@ static void __init tx28_stk5v3_init(void)
         /* spi via ssp will be added when available */
         spi_register_board_info(tx28_spi_board_info,
                         ARRAY_SIZE(tx28_spi_board_info));
-        mxs_add_platform_device("leds-gpio", 0, NULL, 0,
-                        &tx28_stk5v3_led_data, sizeof(tx28_stk5v3_led_data));
+        gpio_led_register_device(0, &tx28_stk5v3_led_data);
         mx28_add_mxs_i2c(0);
         i2c_register_board_info(0, tx28_stk5v3_i2c_boardinfo,
                         ARRAY_SIZE(tx28_stk5v3_i2c_boardinfo));
diff --git a/arch/arm/mach-mxs/ocotp.c b/arch/arm/mach-mxs/ocotp.c
index 65157a35dbba..54add60f94c9 100644
--- a/arch/arm/mach-mxs/ocotp.c
+++ b/arch/arm/mach-mxs/ocotp.c
@@ -16,6 +16,8 @@
 #include <linux/err.h>
 #include <linux/mutex.h>
 
+#include <asm/processor.h>      /* for cpu_relax() */
+
 #include <mach/mxs.h>
 
 #define OCOTP_WORD_OFFSET               0x20
diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile
index af98117043d2..5b114d1558c8 100644
--- a/arch/arm/mach-omap1/Makefile
+++ b/arch/arm/mach-omap1/Makefile
@@ -4,14 +4,14 @@
 
 # Common support
 obj-y := io.o id.o sram.o time.o irq.o mux.o flash.o serial.o devices.o dma.o
-obj-y += clock.o clock_data.o opp_data.o reset.o
+obj-y += clock.o clock_data.o opp_data.o reset.o pm_bus.o
 
 obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o
 
 obj-$(CONFIG_OMAP_32K_TIMER)    += timer32k.o
 
 # Power Management
-obj-$(CONFIG_PM) += pm.o sleep.o pm_bus.o
+obj-$(CONFIG_PM) += pm.o sleep.o
 
 # DSP
 obj-$(CONFIG_OMAP_MBOX_FWK)     += mailbox_mach.o
diff --git a/arch/arm/mach-omap1/dma.c b/arch/arm/mach-omap1/dma.c
index d8559344c6e2..f5a52204b89f 100644
--- a/arch/arm/mach-omap1/dma.c
+++ b/arch/arm/mach-omap1/dma.c
@@ -284,14 +284,15 @@ static int __init omap1_system_dma_init(void)
         dma_base = ioremap(res[0].start, resource_size(&res[0]));
         if (!dma_base) {
                 pr_err("%s: Unable to ioremap\n", __func__);
-                return -ENODEV;
+                ret = -ENODEV;
+                goto exit_device_put;
         }
 
         ret = platform_device_add_resources(pdev, res, ARRAY_SIZE(res));
         if (ret) {
                 dev_err(&pdev->dev, "%s: Unable to add resources for %s%d\n",
                         __func__, pdev->name, pdev->id);
-                goto exit_device_del;
+                goto exit_device_put;
         }
 
         p = kzalloc(sizeof(struct omap_system_dma_plat_info), GFP_KERNEL);
@@ -299,7 +300,7 @@ static int __init omap1_system_dma_init(void)
                 dev_err(&pdev->dev, "%s: Unable to allocate 'p' for %s\n",
                         __func__, pdev->name);
                 ret = -ENOMEM;
-                goto exit_device_put;
+                goto exit_device_del;
         }
 
         d = kzalloc(sizeof(struct omap_dma_dev_attr), GFP_KERNEL);
@@ -380,10 +381,10 @@ exit_release_d:
         kfree(d);
 exit_release_p:
         kfree(p);
-exit_device_put:
-        platform_device_put(pdev);
 exit_device_del:
         platform_device_del(pdev);
+exit_device_put:
+        platform_device_put(pdev);
 
         return ret;
 }
diff --git a/arch/arm/mach-omap1/pm_bus.c b/arch/arm/mach-omap1/pm_bus.c
index fe31d933f0ed..334fb8871bc3 100644
--- a/arch/arm/mach-omap1/pm_bus.c
+++ b/arch/arm/mach-omap1/pm_bus.c
@@ -56,9 +56,13 @@ static struct dev_power_domain default_power_domain = {
                 USE_PLATFORM_PM_SLEEP_OPS
         },
 };
+#define OMAP1_PWR_DOMAIN (&default_power_domain)
+#else
+#define OMAP1_PWR_DOMAIN NULL
+#endif /* CONFIG_PM_RUNTIME */
 
 static struct pm_clk_notifier_block platform_bus_notifier = {
-        .pwr_domain = &default_power_domain,
+        .pwr_domain = OMAP1_PWR_DOMAIN,
         .con_ids = { "ick", "fck", NULL, },
 };
 
@@ -72,4 +76,4 @@ static int __init omap1_pm_runtime_init(void)
         return 0;
 }
 core_initcall(omap1_pm_runtime_init);
-#endif /* CONFIG_PM_RUNTIME */
+
diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c
index d54969be0a54..5de6eac0a725 100644
--- a/arch/arm/mach-omap2/board-2430sdp.c
+++ b/arch/arm/mach-omap2/board-2430sdp.c
@@ -26,13 +26,13 @@
 #include <linux/err.h>
 #include <linux/clk.h>
 #include <linux/io.h>
+#include <linux/gpio.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <mach/gpio.h>
 #include <plat/board.h>
 #include <plat/common.h>
 #include <plat/gpmc.h>
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index ae2963a98041..5dac974be625 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -622,19 +622,19 @@ static struct omap_device_pad serial3_pads[] __initdata = {
                          OMAP_MUX_MODE0),
 };
 
-static struct omap_board_data serial1_data = {
+static struct omap_board_data serial1_data __initdata = {
         .id             = 0,
         .pads           = serial1_pads,
         .pads_cnt       = ARRAY_SIZE(serial1_pads),
 };
 
-static struct omap_board_data serial2_data = {
+static struct omap_board_data serial2_data __initdata = {
         .id             = 1,
         .pads           = serial2_pads,
         .pads_cnt       = ARRAY_SIZE(serial2_pads),
 };
 
-static struct omap_board_data serial3_data = {
+static struct omap_board_data serial3_data __initdata = {
         .id             = 2,
         .pads           = serial3_pads,
         .pads_cnt       = ARRAY_SIZE(serial3_pads),
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index 73fa90bb6953..63de2d396e2d 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -258,7 +258,7 @@ static struct gpio sdp4430_eth_gpios[] __initdata = {
         { ETH_KS8851_IRQ,       GPIOF_IN,               "eth_irq"       },
 };
 
-static int omap_ethernet_init(void)
+static int __init omap_ethernet_init(void)
 {
         int status;
 
@@ -322,6 +322,7 @@ static struct omap2_hsmmc_info mmc[] = {
                 .gpio_wp        = -EINVAL,
                 .nonremovable   = true,
                 .ocr_mask       = MMC_VDD_29_30,
+                .no_off_init    = true,
         },
         {
                 .mmc            = 1,
@@ -681,19 +682,19 @@ static struct omap_device_pad serial4_pads[] __initdata = {
                          OMAP_PIN_OUTPUT | OMAP_MUX_MODE0),
 };
 
-static struct omap_board_data serial2_data = {
+static struct omap_board_data serial2_data __initdata = {
         .id             = 1,
         .pads           = serial2_pads,
         .pads_cnt       = ARRAY_SIZE(serial2_pads),
 };
 
-static struct omap_board_data serial3_data = {
+static struct omap_board_data serial3_data __initdata = {
         .id             = 2,
         .pads           = serial3_pads,
         .pads_cnt       = ARRAY_SIZE(serial3_pads),
 };
 
-static struct omap_board_data serial4_data = {
+static struct omap_board_data serial4_data __initdata = {
         .id             = 3,
         .pads           = serial4_pads,
         .pads_cnt       = ARRAY_SIZE(serial4_pads),
@@ -729,7 +730,7 @@ static void __init omap_4430sdp_init(void)
 
         if (omap_rev() == OMAP4430_REV_ES1_0)
                 package = OMAP_PACKAGE_CBL;
-        omap4_mux_init(board_mux, package);
+        omap4_mux_init(board_mux, NULL, package);
 
         omap_board_config = sdp4430_config;
         omap_board_config_size = ARRAY_SIZE(sdp4430_config);
diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c
index f3beb8eeef77..b124bdfb4239 100644
--- a/arch/arm/mach-omap2/board-apollon.c
+++ b/arch/arm/mach-omap2/board-apollon.c
@@ -27,13 +27,13 @@
 #include <linux/err.h>
 #include <linux/clk.h>
 #include <linux/smc91x.h>
+#include <linux/gpio.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
 
-#include <mach/gpio.h>
 #include <plat/led.h>
 #include <plat/usb.h>
 #include <plat/board.h>
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
index c63115bc1536..77456dec93ea 100644
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -63,8 +63,6 @@
 #define SB_T35_SMSC911X_CS      4
 #define SB_T35_SMSC911X_GPIO    65
 
-#define NAND_BLOCK_SIZE         SZ_128K
-
 #if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
 #include <linux/smsc911x.h>
 #include <plat/gpmc-smsc911x.h>
diff --git a/arch/arm/mach-omap2/board-cm-t3517.c b/arch/arm/mach-omap2/board-cm-t3517.c
index 08f08e812492..c3a9fd35034a 100644
--- a/arch/arm/mach-omap2/board-cm-t3517.c
+++ b/arch/arm/mach-omap2/board-cm-t3517.c
@@ -48,6 +48,7 @@
 
 #include "mux.h"
 #include "control.h"
+#include "common-board-devices.h"
 
 #if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
 static struct gpio_led cm_t3517_leds[] = {
@@ -177,7 +178,7 @@ static struct usbhs_omap_board_data cm_t3517_ehci_pdata __initdata = {
         .reset_gpio_port[2]  = -EINVAL,
 };
 
-static int cm_t3517_init_usbh(void)
+static int __init cm_t3517_init_usbh(void)
 {
         int err;
 
@@ -203,8 +204,6 @@ static inline int cm_t3517_init_usbh(void)
 #endif
 
 #if defined(CONFIG_MTD_NAND_OMAP2) || defined(CONFIG_MTD_NAND_OMAP2_MODULE)
-#define NAND_BLOCK_SIZE         SZ_128K
-
 static struct mtd_partition cm_t3517_nand_partitions[] = {
         {
                 .name           = "xloader",
diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c
index cf520d7dd614..34956ec83296 100644
--- a/arch/arm/mach-omap2/board-devkit8000.c
+++ b/arch/arm/mach-omap2/board-devkit8000.c
@@ -61,8 +61,6 @@
 #include "timer-gp.h"
 #include "common-board-devices.h"
 
-#define NAND_BLOCK_SIZE         SZ_128K
-
 #define OMAP_DM9000_GPIO_IRQ    25
 #define OMAP3_DEVKIT_TS_GPIO    27
 
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index be71426359f2..7f21d24bd437 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -54,8 +54,6 @@
 #include "pm.h"
 #include "common-board-devices.h"
 
-#define NAND_BLOCK_SIZE         SZ_128K
-
 /*
  * OMAP3 Beagle revision
  * Run time detection of Beagle revision is done by reading GPIO.
@@ -106,6 +104,9 @@ static void __init omap3_beagle_init_rev(void)
         beagle_rev = gpio_get_value(171) | (gpio_get_value(172) << 1)
                         | (gpio_get_value(173) << 2);
 
+        gpio_free_array(omap3_beagle_rev_gpios,
+                        ARRAY_SIZE(omap3_beagle_rev_gpios));
+
         switch (beagle_rev) {
         case 7:
                 printk(KERN_INFO "OMAP3 Beagle Rev: Ax/Bx\n");
@@ -579,6 +580,9 @@ static void __init omap3_beagle_init(void)
         omap_nand_flash_init(NAND_BUSWIDTH_16, omap3beagle_nand_partitions,
                              ARRAY_SIZE(omap3beagle_nand_partitions));
 
+        /* Ensure msecure is mux'd to be able to set the RTC. */
+        omap_mux_init_signal("sys_drm_msecure", OMAP_PIN_OFF_OUTPUT_HIGH);
+
         /* Ensure SDRC pins are mux'd for self-refresh */
         omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
         omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index 1d10736c6d3c..23f71d40883e 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -30,6 +30,7 @@
 #include <linux/leds.h>
 #include <linux/input.h>
 #include <linux/input/matrix_keypad.h>
+#include <linux/gpio.h>
 #include <linux/gpio_keys.h>
 #include <linux/mmc/host.h>
 #include <linux/mmc/card.h>
@@ -41,7 +42,6 @@
 
 #include <plat/board.h>
 #include <plat/common.h>
-#include <mach/gpio.h>
 #include <mach/hardware.h>
 #include <plat/mcspi.h>
 #include <plat/usb.h>
@@ -57,8 +57,6 @@
 #define PANDORA_WIFI_NRESET_GPIO        23
 #define OMAP3_PANDORA_TS_GPIO           94
 
-#define NAND_BLOCK_SIZE                 SZ_128K
-
 static struct mtd_partition omap3pandora_nand_partitions[] = {
         {
                 .name           = "xloader",
@@ -86,7 +84,8 @@ static struct mtd_partition omap3pandora_nand_partitions[] = {
 
 static struct omap_nand_platform_data pandora_nand_data = {
         .cs             = 0,
-        .devsize        = 1,    /* '0' for 8-bit, '1' for 16-bit device */
+        .devsize        = NAND_BUSWIDTH_16,
+        .xfer_type      = NAND_OMAP_PREFETCH_DMA,
         .parts          = omap3pandora_nand_partitions,
         .nr_parts       = ARRAY_SIZE(omap3pandora_nand_partitions),
 };
diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c
index 82872d7d313b..5f649faf7377 100644
--- a/arch/arm/mach-omap2/board-omap3touchbook.c
+++ b/arch/arm/mach-omap2/board-omap3touchbook.c
@@ -56,8 +56,6 @@
 
 #include <asm/setup.h>
 
-#define NAND_BLOCK_SIZE         SZ_128K
-
 #define OMAP3_AC_GPIO           136
 #define OMAP3_TS_GPIO           162
 #define TB_BL_PWM_TIMER         9
diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
index 90485fced973..0cfe2005cb50 100644
--- a/arch/arm/mach-omap2/board-omap4panda.c
+++ b/arch/arm/mach-omap2/board-omap4panda.c
@@ -526,19 +526,19 @@ static struct omap_device_pad serial4_pads[] __initdata = {
                          OMAP_PIN_OUTPUT | OMAP_MUX_MODE0),
 };
 
-static struct omap_board_data serial2_data = {
+static struct omap_board_data serial2_data __initdata = {
         .id             = 1,
         .pads           = serial2_pads,
         .pads_cnt       = ARRAY_SIZE(serial2_pads),
 };
 
-static struct omap_board_data serial3_data = {
+static struct omap_board_data serial3_data __initdata = {
         .id             = 2,
         .pads           = serial3_pads,
         .pads_cnt       = ARRAY_SIZE(serial3_pads),
 };
 
-static struct omap_board_data serial4_data = {
+static struct omap_board_data serial4_data __initdata = {
         .id             = 3,
         .pads           = serial4_pads,
         .pads_cnt       = ARRAY_SIZE(serial4_pads),
@@ -687,7 +687,7 @@ static void __init omap4_panda_init(void)
 
         if (omap_rev() == OMAP4430_REV_ES1_0)
                 package = OMAP_PACKAGE_CBL;
-        omap4_mux_init(board_mux, package);
+        omap4_mux_init(board_mux, NULL, package);
 
         if (wl12xx_set_platform_data(&omap_panda_wlan_data))
                 pr_err("error setting wl12xx data\n");
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index 1555918e3ffa..175e1ab2b04d 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -24,6 +24,7 @@
 #include <linux/err.h>
 #include <linux/init.h>
 #include <linux/io.h>
+#include <linux/gpio.h>
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
 #include <linux/i2c/twl.h>
@@ -45,7 +46,6 @@
 #include <plat/common.h>
 #include <video/omapdss.h>
 #include <video/omap-panel-generic-dpi.h>
-#include <mach/gpio.h>
 #include <plat/gpmc.h>
 #include <mach/hardware.h>
 #include <plat/nand.h>
@@ -65,8 +65,6 @@
 #define OVERO_GPIO_USBH_CPEN    168
 #define OVERO_GPIO_USBH_NRESET  183
 
-#define NAND_BLOCK_SIZE SZ_128K
-
 #define OVERO_SMSC911X_CS      5
 #define OVERO_SMSC911X_GPIO    176
 #define OVERO_SMSC911X2_CS     4
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index f6247e71a194..990366726c58 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -488,6 +488,7 @@ static struct regulator_init_data rx51_vmmc2 = {
                 .name                   = "V28_A",
                 .min_uV                 = 2800000,
                 .max_uV                 = 3000000,
+                .always_on              = true, /* due VIO leak to AIC34 VDDs */
                 .apply_uV               = true,
                 .valid_modes_mask       = REGULATOR_MODE_NORMAL
                                         | REGULATOR_MODE_STANDBY,
@@ -582,7 +583,7 @@ static int rx51_twlgpio_setup(struct device *dev, unsigned gpio, unsigned n)
 {
         /* FIXME this gpio setup is just a placeholder for now */
         gpio_request_one(gpio + 6, GPIOF_OUT_INIT_LOW, "backlight_pwm");
-        gpio_request_one(gpio + 7, GPIOF_OUT_INIT_HIGH, "speaker_en");
+        gpio_request_one(gpio + 7, GPIOF_OUT_INIT_LOW, "speaker_en");
 
         return 0;
 }
diff --git a/arch/arm/mach-omap2/board-zoom-display.c b/arch/arm/mach-omap2/board-zoom-display.c
index c7c6beb1ec24..d4683ba5f721 100644
--- a/arch/arm/mach-omap2/board-zoom-display.c
+++ b/arch/arm/mach-omap2/board-zoom-display.c
@@ -26,7 +26,7 @@ static struct gpio zoom_lcd_gpios[] __initdata = {
         { LCD_PANEL_QVGA_GPIO,  GPIOF_OUT_INIT_HIGH, "lcd qvga"  },
 };
 
-static void zoom_lcd_panel_init(void)
+static void __init zoom_lcd_panel_init(void)
 {
         zoom_lcd_gpios[0].gpio = (omap_rev() > OMAP3430_REV_ES3_0) ?
                         LCD_PANEL_RESET_GPIO_PROD :
diff --git a/arch/arm/mach-omap2/common-board-devices.c b/arch/arm/mach-omap2/common-board-devices.c
index e94903b2c65b..94ccf464677b 100644
--- a/arch/arm/mach-omap2/common-board-devices.c
+++ b/arch/arm/mach-omap2/common-board-devices.c
@@ -85,17 +85,17 @@ void __init omap_ads7846_init(int bus_num, int gpio_pendown, int gpio_debounce,
         struct spi_board_info *spi_bi = &ads7846_spi_board_info;
         int err;
 
-        err = gpio_request(gpio_pendown, "TS PenDown");
-        if (err) {
-                pr_err("Could not obtain gpio for TS PenDown: %d\n", err);
-                return;
-        }
-
-        gpio_direction_input(gpio_pendown);
-        gpio_export(gpio_pendown, 0);
+        if (board_pdata && board_pdata->get_pendown_state) {
+                err = gpio_request_one(gpio_pendown, GPIOF_IN, "TSPenDown");
+                if (err) {
+                        pr_err("Couldn't obtain gpio for TSPenDown: %d\n", err);
+                        return;
+                }
+                gpio_export(gpio_pendown, 0);
 
-        if (gpio_debounce)
-                gpio_set_debounce(gpio_pendown, gpio_debounce);
+                if (gpio_debounce)
+                        gpio_set_debounce(gpio_pendown, gpio_debounce);
+        }
 
         ads7846_config.gpio_pendown = gpio_pendown;
 
diff --git a/arch/arm/mach-omap2/common-board-devices.h b/arch/arm/mach-omap2/common-board-devices.h
index eb80b3b0ef47..679719051df5 100644
--- a/arch/arm/mach-omap2/common-board-devices.h
+++ b/arch/arm/mach-omap2/common-board-devices.h
@@ -1,6 +1,8 @@
 #ifndef __OMAP_COMMON_BOARD_DEVICES__
 #define __OMAP_COMMON_BOARD_DEVICES__
 
+#define NAND_BLOCK_SIZE SZ_128K
+
 struct twl4030_platform_data;
 struct mtd_partition;
 
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index 7b8558564591..5b8ca680ed93 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -97,7 +97,7 @@ static int __init omap4_l3_init(void)
 
         WARN(IS_ERR(od), "could not build omap_device for %s\n", oh_name);
 
-        return PTR_ERR(od);
+        return IS_ERR(od) ? PTR_ERR(od) : 0;
 }
 postcore_initcall(omap4_l3_init);
 
diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c
index b2f30bed5a20..66868c5d5a29 100644
--- a/arch/arm/mach-omap2/hsmmc.c
+++ b/arch/arm/mach-omap2/hsmmc.c
@@ -145,6 +145,7 @@ static void omap4_hsmmc1_after_set_reg(struct device *dev, int slot,
                                  int power_on, int vdd)
 {
         u32 reg;
+        unsigned long timeout;
 
         if (power_on) {
                 reg = omap4_ctrl_pad_readl(control_pbias_offset);
@@ -157,9 +158,15 @@ static void omap4_hsmmc1_after_set_reg(struct device *dev, int slot,
                         OMAP4_MMC1_PWRDNZ_MASK |
                         OMAP4_USBC1_ICUSB_PWRDNZ_MASK);
                 omap4_ctrl_pad_writel(reg, control_pbias_offset);
-                /* 4 microsec delay for comparator to generate an error*/
-                udelay(4);
-                reg = omap4_ctrl_pad_readl(control_pbias_offset);
+
+                timeout = jiffies + msecs_to_jiffies(5);
+                do {
+                        reg = omap4_ctrl_pad_readl(control_pbias_offset);
+                        if (!(reg & OMAP4_MMC1_PBIASLITE_VMODE_ERROR_MASK))
+                                break;
+                        usleep_range(100, 200);
+                } while (!time_after(jiffies, timeout));
+
                 if (reg & OMAP4_MMC1_PBIASLITE_VMODE_ERROR_MASK) {
                         pr_err("Pbias Voltage is not same as LDO\n");
                         /* Caution : On VMODE_ERROR Power Down MMC IO */
@@ -331,6 +338,9 @@ static int __init omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c,
         if (c->no_off)
                 mmc->slots[0].no_off = 1;
 
+        if (c->no_off_init)
+                mmc->slots[0].no_regulator_off_init = c->no_off_init;
+
         if (c->vcc_aux_disable_is_sleep)
                 mmc->slots[0].vcc_aux_disable_is_sleep = 1;
 
diff --git a/arch/arm/mach-omap2/hsmmc.h b/arch/arm/mach-omap2/hsmmc.h
index f119348827d4..f757e78d4d4f 100644
--- a/arch/arm/mach-omap2/hsmmc.h
+++ b/arch/arm/mach-omap2/hsmmc.h
@@ -18,6 +18,7 @@ struct omap2_hsmmc_info {
         bool    nonremovable;   /* Nonremovable e.g. eMMC */
         bool    power_saving;   /* Try to sleep or power off when possible */
         bool    no_off;         /* power_saving and power is not to go off */
+        bool    no_off_init;    /* no power off when not in MMC sleep state */
         bool    vcc_aux_disable_is_sleep; /* Regulator off remapped to sleep */
         int     gpio_cd;        /* or -EINVAL */
         int     gpio_wp;        /* or -EINVAL */
diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
index a4ab1e364313..c7fb22abc219 100644
--- a/arch/arm/mach-omap2/mux.c
+++ b/arch/arm/mach-omap2/mux.c
@@ -83,6 +83,9 @@ void omap_mux_write(struct omap_mux_partition *partition, u16 val,
 void omap_mux_write_array(struct omap_mux_partition *partition,
                                  struct omap_board_mux *board_mux)
 {
+        if (!board_mux)
+                return;
+
         while (board_mux->reg_offset != OMAP_MUX_TERMINATOR) {
                 omap_mux_write(partition, board_mux->value,
                                board_mux->reg_offset);
@@ -906,7 +909,7 @@ static struct omap_mux *omap_mux_get_by_gpio(
 u16 omap_mux_get_gpio(int gpio)
 {
         struct omap_mux_partition *partition;
-        struct omap_mux *m;
+        struct omap_mux *m = NULL;
 
         list_for_each_entry(partition, &mux_partitions, node) {
                 m = omap_mux_get_by_gpio(partition, gpio);
diff --git a/arch/arm/mach-omap2/mux.h b/arch/arm/mach-omap2/mux.h
index 137f321c029f..2132308ad1e4 100644
--- a/arch/arm/mach-omap2/mux.h
+++ b/arch/arm/mach-omap2/mux.h
@@ -323,10 +323,12 @@ int omap3_mux_init(struct omap_board_mux *board_mux, int flags);
 
 /**
  * omap4_mux_init() - initialize mux system with board specific set
- * @board_mux:          Board specific mux table
+ * @board_subset:       Board specific mux table
+ * @board_wkup_subset:  Board specific mux table for wakeup instance
  * @flags:              OMAP package type used for the board
  */
-int omap4_mux_init(struct omap_board_mux *board_mux, int flags);
+int omap4_mux_init(struct omap_board_mux *board_subset,
+        struct omap_board_mux *board_wkup_subset, int flags);
 
 /**
  * omap_mux_init - private mux init function, do not call
diff --git a/arch/arm/mach-omap2/mux44xx.c b/arch/arm/mach-omap2/mux44xx.c
index 9a66445112ae..f5a74daab2ff 100644
--- a/arch/arm/mach-omap2/mux44xx.c
+++ b/arch/arm/mach-omap2/mux44xx.c
@@ -1309,7 +1309,8 @@ static struct omap_ball __initdata omap4_wkup_cbl_cbs_ball[] = {
 #define omap4_wkup_cbl_cbs_ball  NULL
 #endif
 
-int __init omap4_mux_init(struct omap_board_mux *board_subset, int flags)
+int __init omap4_mux_init(struct omap_board_mux *board_subset,
+        struct omap_board_mux *board_wkup_subset, int flags)
 {
         struct omap_ball *package_balls_core;
         struct omap_ball *package_balls_wkup = omap4_wkup_cbl_cbs_ball;
@@ -1347,7 +1348,7 @@ int __init omap4_mux_init(struct omap_board_mux *board_subset, int flags)
                             OMAP_MUX_GPIO_IN_MODE3,
                             OMAP4_CTRL_MODULE_PAD_WKUP_MUX_PBASE,
                             OMAP4_CTRL_MODULE_PAD_WKUP_MUX_SIZE,
-                            omap4_wkup_muxmodes, NULL, board_subset,
+                            omap4_wkup_muxmodes, NULL, board_wkup_subset,
                             package_balls_wkup);
 
         return ret;
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index e03429453ce7..293fa6cd50e1 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -1628,7 +1628,7 @@ int omap_hwmod_for_each(int (*fn)(struct omap_hwmod *oh, void *data),
                         void *data)
 {
         struct omap_hwmod *temp_oh;
-        int ret;
+        int ret = 0;
 
         if (!fn)
                 return -EINVAL;
diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index abc548a0c98d..e1c69ffe0f69 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -5109,7 +5109,7 @@ static __initdata struct omap_hwmod *omap44xx_hwmods[] = {
         &omap44xx_iva_seq1_hwmod,
 
         /* kbd class */
-/*      &omap44xx_kbd_hwmod, */
+        &omap44xx_kbd_hwmod,
 
         /* mailbox class */
         &omap44xx_mailbox_hwmod,
diff --git a/arch/arm/mach-omap2/omap_phy_internal.c b/arch/arm/mach-omap2/omap_phy_internal.c
index f47813edd951..58775e3c8476 100644
--- a/arch/arm/mach-omap2/omap_phy_internal.c
+++ b/arch/arm/mach-omap2/omap_phy_internal.c
@@ -56,8 +56,10 @@ int omap4430_phy_init(struct device *dev)
         /* Power down the phy */
         __raw_writel(PHY_PD, ctrl_base + CONTROL_DEV_CONF);
 
-        if (!dev)
+        if (!dev) {
+                iounmap(ctrl_base);
                 return 0;
+        }
 
         phyclk = clk_get(dev, "ocp2scp_usb_phy_ick");
         if (IS_ERR(phyclk)) {
diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c
index a5a83b358ddd..e01da45c0537 100644
--- a/arch/arm/mach-omap2/pm-debug.c
+++ b/arch/arm/mach-omap2/pm-debug.c
@@ -189,7 +189,7 @@ static struct dentry *pm_dbg_dir;
 
 static int pm_dbg_init_done;
 
-static int __init pm_dbg_init(void);
+static int pm_dbg_init(void);
 
 enum {
         DEBUG_FILE_COUNTERS = 0,
@@ -595,7 +595,7 @@ static int option_set(void *data, u64 val)
 
 DEFINE_SIMPLE_ATTRIBUTE(pm_dbg_option_fops, option_get, option_set, "%llu\n");
 
-static int __init pm_dbg_init(void)
+static int pm_dbg_init(void)
 {
         int i;
         struct dentry *d;
diff --git a/arch/arm/mach-pxa/spitz_pm.c b/arch/arm/mach-pxa/spitz_pm.c
index 7fe74067d85f..094279aefe9c 100644
--- a/arch/arm/mach-pxa/spitz_pm.c
+++ b/arch/arm/mach-pxa/spitz_pm.c
@@ -14,6 +14,7 @@
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/delay.h>
+#include <linux/gpio.h>
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
 #include <linux/apm-emulation.h>
diff --git a/arch/arm/mach-s3c2410/Makefile b/arch/arm/mach-s3c2410/Makefile
index 0d468e96e83e..81695353d8f4 100644
--- a/arch/arm/mach-s3c2410/Makefile
+++ b/arch/arm/mach-s3c2410/Makefile
@@ -10,7 +10,6 @@ obj-n				:=
 obj-                            :=
 
 obj-$(CONFIG_CPU_S3C2410)       += s3c2410.o
-obj-$(CONFIG_CPU_S3C2410)       += irq.o
 obj-$(CONFIG_CPU_S3C2410_DMA)   += dma.o
 obj-$(CONFIG_CPU_S3C2410_DMA)   += dma.o
 obj-$(CONFIG_S3C2410_PM)        += pm.o sleep.o
diff --git a/arch/arm/mach-s3c2410/irq.c b/arch/arm/mach-s3c2410/irq.c
deleted file mode 100644
index 2854129f8cc7..000000000000
--- a/arch/arm/mach-s3c2410/irq.c
+++ /dev/null
@@ -1,34 +0,0 @@
-/* linux/arch/arm/mach-s3c2410/irq.c
- *
- * Copyright (c) 2006 Simtec Electronics
- *      Ben Dooks <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/syscore_ops.h>
-
-#include <plat/cpu.h>
-#include <plat/pm.h>
-
-struct syscore_ops s3c24xx_irq_syscore_ops = {
-        .suspend        = s3c24xx_irq_suspend,
-        .resume         = s3c24xx_irq_resume,
-};
diff --git a/arch/arm/mach-s5pv210/cpufreq.c b/arch/arm/mach-s5pv210/cpufreq.c
index 22046e2f53c2..153af8b359ec 100644
--- a/arch/arm/mach-s5pv210/cpufreq.c
+++ b/arch/arm/mach-s5pv210/cpufreq.c
@@ -101,12 +101,14 @@ static void s5pv210_set_refresh(enum s5pv210_dmc_port ch, unsigned long freq)
         unsigned long tmp, tmp1;
         void __iomem *reg = NULL;
 
-        if (ch == DMC0)
+        if (ch == DMC0) {
                 reg = (S5P_VA_DMC0 + 0x30);
-        else if (ch == DMC1)
+        } else if (ch == DMC1) {
                 reg = (S5P_VA_DMC1 + 0x30);
-        else
+        } else {
                 printk(KERN_ERR "Cannot find DMC port\n");
+                return;
+        }
 
         /* Find current DRAM frequency */
         tmp = s5pv210_dram_conf[ch].freq;
diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c
index c95258c274c1..1e2aba23e0d6 100644
--- a/arch/arm/mach-shmobile/board-ag5evm.c
+++ b/arch/arm/mach-shmobile/board-ag5evm.c
@@ -382,10 +382,8 @@ void ag5evm_sdhi1_set_pwr(struct platform_device *pdev, int state)
 }
 
 static struct sh_mobile_sdhi_info sh_sdhi1_platdata = {
-        .dma_slave_tx   = SHDMA_SLAVE_SDHI1_TX,
-        .dma_slave_rx   = SHDMA_SLAVE_SDHI1_RX,
         .tmio_flags     = TMIO_MMC_WRPROTECT_DISABLE,
-        .tmio_caps      = MMC_CAP_NONREMOVABLE,
+        .tmio_caps      = MMC_CAP_NONREMOVABLE | MMC_CAP_SDIO_IRQ,
         .tmio_ocr_mask  = MMC_VDD_32_33 | MMC_VDD_33_34,
         .set_pwr        = ag5evm_sdhi1_set_pwr,
 };
diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c
index 776f20560e72..7e1d37584321 100644
--- a/arch/arm/mach-shmobile/board-mackerel.c
+++ b/arch/arm/mach-shmobile/board-mackerel.c
@@ -126,7 +126,7 @@
  * ------+--------------------+--------------------+-------
  * IRQ0  | ICR1A.IRQ0SA=0010  | SDHI2 card detect  | Low
  * IRQ6  | ICR1A.IRQ6SA=0011  | Ether(LAN9220)     | High
- * IRQ7  | ICR1A.IRQ7SA=0010  | LCD Tuch Panel     | Low
+ * IRQ7  | ICR1A.IRQ7SA=0010  | LCD Touch Panel    | Low
  * IRQ8  | ICR2A.IRQ8SA=0010  | MMC/SD card detect | Low
  * IRQ9  | ICR2A.IRQ9SA=0010  | KEY(TCA6408)       | Low
  * IRQ21 | ICR4A.IRQ21SA=0011 | Sensor(ADXL345)    | High
@@ -165,10 +165,10 @@
  * USB1 can become Host by r8a66597, and become Function by renesas_usbhs.
  * But don't select both drivers in same time.
  * These uses same IRQ number for request_irq(), and aren't supporting
- * IRQF_SHARD / IORESOURCE_IRQ_SHAREABLE.
+ * IRQF_SHARED / IORESOURCE_IRQ_SHAREABLE.
  *
  * Actually these are old/new version of USB driver.
- * This mean its register will be broken if it supports SHARD IRQ,
+ * This mean its register will be broken if it supports shared IRQ,
  */
 
 /*
@@ -562,7 +562,121 @@ out:
                 clk_put(hdmi_ick);
 }
 
-/* USB1 (Host) */
+/* USBHS0 is connected to CN22 which takes a USB Mini-B plug
+ *
+ * The sh7372 SoC has IRQ7 set aside for USBHS0 hotplug,
+ * but on this particular board IRQ7 is already used by
+ * the touch screen. This leaves us with software polling.
+ */
+#define USBHS0_POLL_INTERVAL (HZ * 5)
+
+struct usbhs_private {
+        unsigned int usbphyaddr;
+        unsigned int usbcrcaddr;
+        struct renesas_usbhs_platform_info info;
+        struct delayed_work work;
+        struct platform_device *pdev;
+};
+
+#define usbhs_get_priv(pdev)                            \
+        container_of(renesas_usbhs_get_info(pdev),      \
+                     struct usbhs_private, info)
+
+#define usbhs_is_connected(priv)                        \
+        (!((1 << 7) & __raw_readw(priv->usbcrcaddr)))
+
+static int usbhs_get_vbus(struct platform_device *pdev)
+{
+        return usbhs_is_connected(usbhs_get_priv(pdev));
+}
+
+static void usbhs_phy_reset(struct platform_device *pdev)
+{
+        struct usbhs_private *priv = usbhs_get_priv(pdev);
+
+        /* init phy */
+        __raw_writew(0x8a0a, priv->usbcrcaddr);
+}
+
+static int usbhs0_get_id(struct platform_device *pdev)
+{
+        return USBHS_GADGET;
+}
+
+static void usbhs0_work_function(struct work_struct *work)
+{
+        struct usbhs_private *priv = container_of(work, struct usbhs_private,
+                                                  work.work);
+
+        renesas_usbhs_call_notify_hotplug(priv->pdev);
+        schedule_delayed_work(&priv->work, USBHS0_POLL_INTERVAL);
+}
+
+static int usbhs0_hardware_init(struct platform_device *pdev)
+{
+        struct usbhs_private *priv = usbhs_get_priv(pdev);
+
+        priv->pdev = pdev;
+        INIT_DELAYED_WORK(&priv->work, usbhs0_work_function);
+        schedule_delayed_work(&priv->work, USBHS0_POLL_INTERVAL);
+        return 0;
+}
+
+static void usbhs0_hardware_exit(struct platform_device *pdev)
+{
+        struct usbhs_private *priv = usbhs_get_priv(pdev);
+
+        cancel_delayed_work_sync(&priv->work);
+}
+
+static struct usbhs_private usbhs0_private = {
+        .usbcrcaddr     = 0xe605810c,           /* USBCR2 */
+        .info = {
+                .platform_callback = {
+                        .hardware_init  = usbhs0_hardware_init,
+                        .hardware_exit  = usbhs0_hardware_exit,
+                        .phy_reset      = usbhs_phy_reset,
+                        .get_id         = usbhs0_get_id,
+                        .get_vbus       = usbhs_get_vbus,
+                },
+                .driver_param = {
+                        .buswait_bwait  = 4,
+                },
+        },
+};
+
+static struct resource usbhs0_resources[] = {
+        [0] = {
+                .name   = "USBHS0",
+                .start  = 0xe6890000,
+                .end    = 0xe68900e6 - 1,
+                .flags  = IORESOURCE_MEM,
+        },
+        [1] = {
+                .start  = evt2irq(0x1ca0) /* USB0_USB0I0 */,
+                .flags  = IORESOURCE_IRQ,
+        },
+};
+
+static struct platform_device usbhs0_device = {
+        .name   = "renesas_usbhs",
+        .id     = 0,
+        .dev = {
+                .platform_data          = &usbhs0_private.info,
+        },
+        .num_resources  = ARRAY_SIZE(usbhs0_resources),
+        .resource       = usbhs0_resources,
+};
+
+/* USBHS1 is connected to CN31 which takes a USB Mini-AB plug
+ *
+ * Use J30 to select between Host and Function. This setting
+ * can however not be detected by software. Hotplug of USBHS1
+ * is provided via IRQ8.
+ */
+#define IRQ8 evt2irq(0x0300)
+
+/* USBHS1 USB Host support via r8a66597_hcd */
 static void usb1_host_port_power(int port, int power)
 {
         if (!power) /* only power-on is supported for now */
@@ -579,9 +693,9 @@ static struct r8a66597_platdata usb1_host_data = {
 
 static struct resource usb1_host_resources[] = {
         [0] = {
-                .name   = "USBHS",
-                .start  = 0xE68B0000,
-                .end    = 0xE68B00E6 - 1,
+                .name   = "USBHS1",
+                .start  = 0xe68b0000,
+                .end    = 0xe68b00e6 - 1,
                 .flags  = IORESOURCE_MEM,
         },
         [1] = {
@@ -602,37 +716,14 @@ static struct platform_device usb1_host_device = {
         .resource       = usb1_host_resources,
 };
 
-/* USB1 (Function) */
+/* USBHS1 USB Function support via renesas_usbhs */
+
 #define USB_PHY_MODE            (1 << 4)
 #define USB_PHY_INT_EN          ((1 << 3) | (1 << 2))
 #define USB_PHY_ON              (1 << 1)
 #define USB_PHY_OFF             (1 << 0)
 #define USB_PHY_INT_CLR         (USB_PHY_ON | USB_PHY_OFF)
 
-struct usbhs_private {
-        unsigned int irq;
-        unsigned int usbphyaddr;
-        unsigned int usbcrcaddr;
-        struct renesas_usbhs_platform_info info;
-};
-
-#define usbhs_get_priv(pdev)                            \
-        container_of(renesas_usbhs_get_info(pdev),      \
-                     struct usbhs_private, info)
-
-#define usbhs_is_connected(priv)                        \
-        (!((1 << 7) & __raw_readw(priv->usbcrcaddr)))
-
-static int usbhs1_get_id(struct platform_device *pdev)
-{
-        return USBHS_GADGET;
-}
-
-static int usbhs1_get_vbus(struct platform_device *pdev)
-{
-        return usbhs_is_connected(usbhs_get_priv(pdev));
-}
-
 static irqreturn_t usbhs1_interrupt(int irq, void *data)
 {
         struct platform_device *pdev = data;
@@ -654,12 +745,10 @@ static int usbhs1_hardware_init(struct platform_device *pdev)
         struct usbhs_private *priv = usbhs_get_priv(pdev);
         int ret;
 
-        irq_set_irq_type(priv->irq, IRQ_TYPE_LEVEL_HIGH);
-
         /* clear interrupt status */
         __raw_writew(USB_PHY_MODE | USB_PHY_INT_CLR, priv->usbphyaddr);
 
-        ret = request_irq(priv->irq, usbhs1_interrupt, 0,
+        ret = request_irq(IRQ8, usbhs1_interrupt, IRQF_TRIGGER_HIGH,
                           dev_name(&pdev->dev), pdev);
         if (ret) {
                 dev_err(&pdev->dev, "request_irq err\n");
@@ -679,15 +768,12 @@ static void usbhs1_hardware_exit(struct platform_device *pdev)
         /* clear interrupt status */
         __raw_writew(USB_PHY_MODE | USB_PHY_INT_CLR, priv->usbphyaddr);
 
-        free_irq(priv->irq, pdev);
+        free_irq(IRQ8, pdev);
 }
 
-static void usbhs1_phy_reset(struct platform_device *pdev)
+static int usbhs1_get_id(struct platform_device *pdev)
 {
-        struct usbhs_private *priv = usbhs_get_priv(pdev);
-
-        /* init phy */
-        __raw_writew(0x8a0a, priv->usbcrcaddr);
+        return USBHS_GADGET;
 }
 
 static u32 usbhs1_pipe_cfg[] = {
@@ -710,16 +796,15 @@ static u32 usbhs1_pipe_cfg[] = {
 };
 
 static struct usbhs_private usbhs1_private = {
-        .irq            = evt2irq(0x0300),      /* IRQ8 */
-        .usbphyaddr     = 0xE60581E2,           /* USBPHY1INTAP */
-        .usbcrcaddr     = 0xE6058130,           /* USBCR4 */
+        .usbphyaddr     = 0xe60581e2,           /* USBPHY1INTAP */
+        .usbcrcaddr     = 0xe6058130,           /* USBCR4 */
         .info = {
                 .platform_callback = {
                         .hardware_init  = usbhs1_hardware_init,
                         .hardware_exit  = usbhs1_hardware_exit,
-                        .phy_reset      = usbhs1_phy_reset,
                         .get_id         = usbhs1_get_id,
-                        .get_vbus       = usbhs1_get_vbus,
+                        .phy_reset      = usbhs_phy_reset,
+                        .get_vbus       = usbhs_get_vbus,
                 },
                 .driver_param = {
                         .buswait_bwait  = 4,
@@ -731,9 +816,9 @@ static struct usbhs_private usbhs1_private = {
 
 static struct resource usbhs1_resources[] = {
         [0] = {
-                .name   = "USBHS",
-                .start  = 0xE68B0000,
-                .end    = 0xE68B00E6 - 1,
+                .name   = "USBHS1",
+                .start  = 0xe68b0000,
+                .end    = 0xe68b00e6 - 1,
                 .flags  = IORESOURCE_MEM,
         },
         [1] = {
@@ -752,7 +837,6 @@ static struct platform_device usbhs1_device = {
         .resource       = usbhs1_resources,
 };
 
-
 /* LED */
 static struct gpio_led mackerel_leds[] = {
         {
@@ -1203,6 +1287,7 @@ static struct platform_device *mackerel_devices[] __initdata = {
         &nor_flash_device,
         &smc911x_device,
         &lcdc_device,
+        &usbhs0_device,
         &usb1_host_device,
         &usbhs1_device,
         &leds_device,
@@ -1301,6 +1386,7 @@ static void __init mackerel_map_io(void)
 
 #define GPIO_PORT9CR    0xE6051009
 #define GPIO_PORT10CR   0xE605100A
+#define GPIO_PORT167CR  0xE60520A7
 #define GPIO_PORT168CR  0xE60520A8
 #define SRCR4           0xe61580bc
 #define USCCR1          0xE6058144
@@ -1354,17 +1440,17 @@ static void __init mackerel_init(void)
         gpio_request(GPIO_PORT151, NULL); /* LCDDON */
         gpio_direction_output(GPIO_PORT151, 1);
 
-        /* USB enable */
-        gpio_request(GPIO_FN_VBUS0_1,    NULL);
-        gpio_request(GPIO_FN_IDIN_1_18,  NULL);
-        gpio_request(GPIO_FN_PWEN_1_115, NULL);
-        gpio_request(GPIO_FN_OVCN_1_114, NULL);
-        gpio_request(GPIO_FN_EXTLP_1,    NULL);
-        gpio_request(GPIO_FN_OVCN2_1,    NULL);
-        gpio_pull_down(GPIO_PORT168CR);
-
-        /* setup USB phy */
-        __raw_writew(0x8a0a, 0xE6058130);       /* USBCR4 */
+        /* USBHS0 */
+        gpio_request(GPIO_FN_VBUS0_0, NULL);
+        gpio_pull_down(GPIO_PORT168CR); /* VBUS0_0 pull down */
+
+        /* USBHS1 */
+        gpio_request(GPIO_FN_VBUS0_1, NULL);
+        gpio_pull_down(GPIO_PORT167CR); /* VBUS0_1 pull down */
+        gpio_request(GPIO_FN_IDIN_1_113, NULL);
+
+        /* USB phy tweak to make the r8a66597_hcd host driver work */
+        __raw_writew(0x8a0a, 0xe6058130);       /* USBCR4 */
 
         /* enable FSI2 port A (ak4643) */
         gpio_request(GPIO_FN_FSIAIBT,   NULL);
diff --git a/arch/arm/mach-shmobile/intc-sh73a0.c b/arch/arm/mach-shmobile/intc-sh73a0.c
index 5d0e1503ece6..a911a60e7719 100644
--- a/arch/arm/mach-shmobile/intc-sh73a0.c
+++ b/arch/arm/mach-shmobile/intc-sh73a0.c
@@ -250,6 +250,11 @@ static irqreturn_t sh73a0_intcs_demux(int irq, void *dev_id)
         return IRQ_HANDLED;
 }
 
+static int sh73a0_set_wake(struct irq_data *data, unsigned int on)
+{
+        return 0; /* always allow wakeup */
+}
+
 void __init sh73a0_init_irq(void)
 {
         void __iomem *gic_dist_base = __io(0xf0001000);
@@ -257,6 +262,7 @@ void __init sh73a0_init_irq(void)
         void __iomem *intevtsa = ioremap_nocache(0xffd20100, PAGE_SIZE);
 
         gic_init(0, 29, gic_dist_base, gic_cpu_base);
+        gic_arch_extn.irq_set_wake = sh73a0_set_wake;
 
         register_intc_controller(&intcs_desc);
 
diff --git a/arch/arm/mach-shmobile/setup-sh7367.c b/arch/arm/mach-shmobile/setup-sh7367.c
index 2c10190dbb55..e546017f15de 100644
--- a/arch/arm/mach-shmobile/setup-sh7367.c
+++ b/arch/arm/mach-shmobile/setup-sh7367.c
@@ -38,7 +38,7 @@ static struct plat_sci_port scif0_platform_data = {
         .flags          = UPF_BOOT_AUTOCONF,
         .scscr          = SCSCR_RE | SCSCR_TE,
         .scbrr_algo_id  = SCBRR_ALGO_4,
-        .type           = PORT_SCIF,
+        .type           = PORT_SCIFA,
         .irqs           = { evt2irq(0xc00), evt2irq(0xc00),
                             evt2irq(0xc00), evt2irq(0xc00) },
 };
@@ -57,7 +57,7 @@ static struct plat_sci_port scif1_platform_data = {
         .flags          = UPF_BOOT_AUTOCONF,
         .scscr          = SCSCR_RE | SCSCR_TE,
         .scbrr_algo_id  = SCBRR_ALGO_4,
-        .type           = PORT_SCIF,
+        .type           = PORT_SCIFA,
         .irqs           = { evt2irq(0xc20), evt2irq(0xc20),
                             evt2irq(0xc20), evt2irq(0xc20) },
 };
@@ -76,7 +76,7 @@ static struct plat_sci_port scif2_platform_data = {
         .flags          = UPF_BOOT_AUTOCONF,
         .scscr          = SCSCR_RE | SCSCR_TE,
         .scbrr_algo_id  = SCBRR_ALGO_4,
-        .type           = PORT_SCIF,
+        .type           = PORT_SCIFA,
         .irqs           = { evt2irq(0xc40), evt2irq(0xc40),
                             evt2irq(0xc40), evt2irq(0xc40) },
 };
@@ -95,7 +95,7 @@ static struct plat_sci_port scif3_platform_data = {
         .flags          = UPF_BOOT_AUTOCONF,
         .scscr          = SCSCR_RE | SCSCR_TE,
         .scbrr_algo_id  = SCBRR_ALGO_4,
-        .type           = PORT_SCIF,
+        .type           = PORT_SCIFA,
         .irqs           = { evt2irq(0xc60), evt2irq(0xc60),
                             evt2irq(0xc60), evt2irq(0xc60) },
 };
@@ -114,7 +114,7 @@ static struct plat_sci_port scif4_platform_data = {
         .flags          = UPF_BOOT_AUTOCONF,
         .scscr          = SCSCR_RE | SCSCR_TE,
         .scbrr_algo_id  = SCBRR_ALGO_4,
-        .type           = PORT_SCIF,
+        .type           = PORT_SCIFA,
         .irqs           = { evt2irq(0xd20), evt2irq(0xd20),
                             evt2irq(0xd20), evt2irq(0xd20) },
 };
@@ -133,7 +133,7 @@ static struct plat_sci_port scif5_platform_data = {
         .flags          = UPF_BOOT_AUTOCONF,
         .scscr          = SCSCR_RE | SCSCR_TE,
         .scbrr_algo_id  = SCBRR_ALGO_4,
-        .type           = PORT_SCIF,
+        .type           = PORT_SCIFA,
         .irqs           = { evt2irq(0xd40), evt2irq(0xd40),
                             evt2irq(0xd40), evt2irq(0xd40) },
 };
@@ -152,7 +152,7 @@ static struct plat_sci_port scif6_platform_data = {
         .flags          = UPF_BOOT_AUTOCONF,
         .scscr          = SCSCR_RE | SCSCR_TE,
         .scbrr_algo_id  = SCBRR_ALGO_4,
-        .type           = PORT_SCIF,
+        .type           = PORT_SCIFB,
         .irqs           = { evt2irq(0xd60), evt2irq(0xd60),
                             evt2irq(0xd60), evt2irq(0xd60) },
 };
diff --git a/arch/arm/mach-u300/clock.h b/arch/arm/mach-u300/clock.h
index c34f3ea3017c..4f50ca8f901e 100644
--- a/arch/arm/mach-u300/clock.h
+++ b/arch/arm/mach-u300/clock.h
@@ -31,7 +31,7 @@ struct clk {
         bool reset;
         __u16 clk_val;
         __s8 usecount;
-        __u32 res_reg;
+        void __iomem * res_reg;
         __u16 res_mask;
 
         bool hw_ctrld;
diff --git a/arch/arm/mach-u300/include/mach/u300-regs.h b/arch/arm/mach-u300/include/mach/u300-regs.h
index 8b85df4c8d8f..035fdc9dbdb0 100644
--- a/arch/arm/mach-u300/include/mach/u300-regs.h
+++ b/arch/arm/mach-u300/include/mach/u300-regs.h
@@ -18,6 +18,12 @@
  * the defines are used for setting up the I/O memory mapping.
  */
 
+#ifdef __ASSEMBLER__
+#define IOMEM(a) (a)
+#else
+#define IOMEM(a) (void __iomem *) a
+#endif
+
 /* NAND Flash CS0 */
 #define U300_NAND_CS0_PHYS_BASE         0x80000000
 
@@ -48,13 +54,6 @@
 #endif
 
 /*
- * All the following peripherals are specified at their PHYSICAL address,
- * so if you need to access them (in the kernel), you MUST use the macros
- * defined in <asm/io.h> to map to the IO_ADDRESS_AHB() IO_ADDRESS_FAST()
- * etc.
- */
-
-/*
  * AHB peripherals
  */
 
@@ -63,11 +62,11 @@
 
 /* Vectored Interrupt Controller 0, servicing 32 interrupts */
 #define U300_INTCON0_BASE               (U300_AHB_PER_PHYS_BASE+0x1000)
-#define U300_INTCON0_VBASE              (U300_AHB_PER_VIRT_BASE+0x1000)
+#define U300_INTCON0_VBASE              IOMEM(U300_AHB_PER_VIRT_BASE+0x1000)
 
 /* Vectored Interrupt Controller 1, servicing 32 interrupts */
 #define U300_INTCON1_BASE               (U300_AHB_PER_PHYS_BASE+0x2000)
-#define U300_INTCON1_VBASE              (U300_AHB_PER_VIRT_BASE+0x2000)
+#define U300_INTCON1_VBASE              IOMEM(U300_AHB_PER_VIRT_BASE+0x2000)
 
 /* Memory Stick Pro (MSPRO) controller */
 #define U300_MSPRO_BASE                 (U300_AHB_PER_PHYS_BASE+0x3000)
@@ -115,7 +114,7 @@
 
 /* SYSCON */
 #define U300_SYSCON_BASE                (U300_SLOW_PER_PHYS_BASE+0x1000)
-#define U300_SYSCON_VBASE               (U300_SLOW_PER_VIRT_BASE+0x1000)
+#define U300_SYSCON_VBASE               IOMEM(U300_SLOW_PER_VIRT_BASE+0x1000)
 
 /* Watchdog */
 #define U300_WDOG_BASE                  (U300_SLOW_PER_PHYS_BASE+0x2000)
@@ -125,7 +124,7 @@
 
 /* APP side special timer */
 #define U300_TIMER_APP_BASE             (U300_SLOW_PER_PHYS_BASE+0x4000)
-#define U300_TIMER_APP_VBASE            (U300_SLOW_PER_VIRT_BASE+0x4000)
+#define U300_TIMER_APP_VBASE            IOMEM(U300_SLOW_PER_VIRT_BASE+0x4000)
 
 /* Keypad */
 #define U300_KEYPAD_BASE                (U300_SLOW_PER_PHYS_BASE+0x5000)
@@ -181,5 +180,4 @@
  * Virtual accessor macros for static devices
  */
 
-
 #endif
diff --git a/arch/arm/mach-u300/timer.c b/arch/arm/mach-u300/timer.c
index 891cf44591e0..18d7fa0603c2 100644
--- a/arch/arm/mach-u300/timer.c
+++ b/arch/arm/mach-u300/timer.c
@@ -411,8 +411,7 @@ static void __init u300_timer_init(void)
         /* Use general purpose timer 2 as clock source */
         if (clocksource_mmio_init(U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT2CC,
                         "GPT2", rate, 300, 32, clocksource_mmio_readl_up))
-                printk(KERN_ERR "timer: failed to initialize clock "
-                       "source %s\n", clocksource_u300_1mhz.name);
+                pr_err("timer: failed to initialize U300 clock source\n");
 
         clockevents_calc_mult_shift(&clockevent_u300_1mhz,
                                     rate, APPTIMER_MIN_RANGE);
diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c
index c3c417656bd9..4598b06c8c55 100644
--- a/arch/arm/mach-ux500/cpu-db8500.c
+++ b/arch/arm/mach-ux500/cpu-db8500.c
@@ -159,6 +159,9 @@ static void __init db8500_add_gpios(void)
                 /* No custom data yet */
         };
 
+        if (cpu_is_u8500v2())
+                pdata.supports_sleepmode = true;
+
         dbx500_add_gpios(ARRAY_AND_SIZE(db8500_gpio_base),
                          IRQ_DB8500_GPIO0, &pdata);
 }
diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c
index 285edcd2da2a..9e6b93b1a043 100644
--- a/arch/arm/mach-vexpress/v2m.c
+++ b/arch/arm/mach-vexpress/v2m.c
@@ -46,12 +46,6 @@ static struct map_desc v2m_io_desc[] __initdata = {
         },
 };
 
-static void __init v2m_init_early(void)
-{
-        ct_desc->init_early();
-        versatile_sched_clock_init(MMIO_P2V(V2M_SYS_24MHZ), 24000000);
-}
-
 static void __init v2m_timer_init(void)
 {
         u32 scctrl;
@@ -365,6 +359,13 @@ static struct clk_lookup v2m_lookups[] = {
         },
 };
 
+static void __init v2m_init_early(void)
+{
+        ct_desc->init_early();
+        clkdev_add_table(v2m_lookups, ARRAY_SIZE(v2m_lookups));
+        versatile_sched_clock_init(MMIO_P2V(V2M_SYS_24MHZ), 24000000);
+}
+
 static void v2m_power_off(void)
 {
         if (v2m_cfg_write(SYS_CFG_SHUTDOWN | SYS_CFG_SITE_MB, 0))
@@ -418,8 +419,6 @@ static void __init v2m_init(void)
 {
         int i;
 
-        clkdev_add_table(v2m_lookups, ARRAY_SIZE(v2m_lookups));
-
         platform_device_register(&v2m_pcie_i2c_device);
         platform_device_register(&v2m_ddc_i2c_device);
         platform_device_register(&v2m_flash_device);
diff --git a/arch/arm/mm/context.c b/arch/arm/mm/context.c
index 8bfae964b133..b0ee9ba3cfab 100644
--- a/arch/arm/mm/context.c
+++ b/arch/arm/mm/context.c
@@ -24,7 +24,9 @@ DEFINE_PER_CPU(struct mm_struct *, current_mm);
 
 /*
  * We fork()ed a process, and we need a new context for the child
- * to run in.
+ * to run in.  We reserve version 0 for initial tasks so we will
+ * always allocate an ASID. The ASID 0 is reserved for the TTBR
+ * register changing sequence.
  */
 void __init_new_context(struct task_struct *tsk, struct mm_struct *mm)
 {
@@ -34,11 +36,8 @@ void __init_new_context(struct task_struct *tsk, struct mm_struct *mm)
 
 static void flush_context(void)
 {
-        u32 ttb;
-        /* Copy TTBR1 into TTBR0 */
-        asm volatile("mrc       p15, 0, %0, c2, c0, 1\n"
-                     "mcr       p15, 0, %0, c2, c0, 0"
-                     : "=r" (ttb));
+        /* set the reserved ASID before flushing the TLB */
+        asm("mcr        p15, 0, %0, c13, c0, 1\n" : : "r" (0));
         isb();
         local_flush_tlb_all();
         if (icache_is_vivt_asid_tagged()) {
@@ -94,7 +93,7 @@ static void reset_context(void *info)
                 return;
 
         smp_rmb();
-        asid = cpu_last_asid + cpu;
+        asid = cpu_last_asid + cpu + 1;
 
         flush_context();
         set_mm_context(mm, asid);
@@ -144,13 +143,13 @@ void __new_context(struct mm_struct *mm)
          * to start a new version and flush the TLB.
          */
         if (unlikely((asid & ~ASID_MASK) == 0)) {
-                asid = cpu_last_asid + smp_processor_id();
+                asid = cpu_last_asid + smp_processor_id() + 1;
                 flush_context();
 #ifdef CONFIG_SMP
                 smp_wmb();
                 smp_call_function(reset_context, NULL, 1);
 #endif
-                cpu_last_asid += NR_CPUS - 1;
+                cpu_last_asid += NR_CPUS;
         }
 
         set_mm_context(mm, asid);
diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c
index 2c2cce9cd8c8..c19571c40a21 100644
--- a/arch/arm/mm/init.c
+++ b/arch/arm/mm/init.c
@@ -331,6 +331,12 @@ void __init arm_memblock_init(struct meminfo *mi, struct machine_desc *mdesc)
 #endif
 #ifdef CONFIG_BLK_DEV_INITRD
         if (phys_initrd_size &&
+            !memblock_is_region_memory(phys_initrd_start, phys_initrd_size)) {
+                pr_err("INITRD: 0x%08lx+0x%08lx is not a memory region - disabling initrd\n",
+                       phys_initrd_start, phys_initrd_size);
+                phys_initrd_start = phys_initrd_size = 0;
+        }
+        if (phys_initrd_size &&
             memblock_is_region_reserved(phys_initrd_start, phys_initrd_size)) {
                 pr_err("INITRD: 0x%08lx+0x%08lx overlaps in-use memory region - disabling initrd\n",
                        phys_initrd_start, phys_initrd_size);
@@ -635,7 +641,8 @@ void __init mem_init(void)
                         "    modules : 0x%08lx - 0x%08lx   (%4ld MB)\n"
                         "      .init : 0x%p" " - 0x%p" "   (%4d kB)\n"
                         "      .text : 0x%p" " - 0x%p" "   (%4d kB)\n"
-                        "      .data : 0x%p" " - 0x%p" "   (%4d kB)\n",
+                        "      .data : 0x%p" " - 0x%p" "   (%4d kB)\n"
+                        "       .bss : 0x%p" " - 0x%p" "   (%4d kB)\n",
 
                         MLK(UL(CONFIG_VECTORS_BASE), UL(CONFIG_VECTORS_BASE) +
                                 (PAGE_SIZE)),
@@ -657,7 +664,8 @@ void __init mem_init(void)
 
                         MLK_ROUNDUP(__init_begin, __init_end),
                         MLK_ROUNDUP(_text, _etext),
-                        MLK_ROUNDUP(_sdata, _edata));
+                        MLK_ROUNDUP(_sdata, _edata),
+                        MLK_ROUNDUP(__bss_start, __bss_stop));
 
 #undef MLK
 #undef MLM
diff --git a/arch/arm/mm/proc-arm7tdmi.S b/arch/arm/mm/proc-arm7tdmi.S
index e4c165ca6696..537ffcb0646d 100644
--- a/arch/arm/mm/proc-arm7tdmi.S
+++ b/arch/arm/mm/proc-arm7tdmi.S
@@ -146,7 +146,7 @@ __arm7tdmi_proc_info:
                 .long   0
                 .long   0
                 .long   v4_cache_fns
-                .size   __arm7tdmi_proc_info, . - __arm7dmi_proc_info
+                .size   __arm7tdmi_proc_info, . - __arm7tdmi_proc_info
 
                 .type   __triscenda7_proc_info, #object
 __triscenda7_proc_info:
diff --git a/arch/arm/mm/proc-arm9tdmi.S b/arch/arm/mm/proc-arm9tdmi.S
index 7b7ebd4d096d..546b54da1005 100644
--- a/arch/arm/mm/proc-arm9tdmi.S
+++ b/arch/arm/mm/proc-arm9tdmi.S
@@ -116,7 +116,7 @@ __arm9tdmi_proc_info:
                 .long   0
                 .long   0
                 .long   v4_cache_fns
-                .size   __arm9tdmi_proc_info, . - __arm9dmi_proc_info
+                .size   __arm9tdmi_proc_info, . - __arm9tdmi_proc_info
 
                 .type   __p2001_proc_info, #object
 __p2001_proc_info:
diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S
index b3b566ec83d3..3c3867850a30 100644
--- a/arch/arm/mm/proc-v7.S
+++ b/arch/arm/mm/proc-v7.S
@@ -108,16 +108,18 @@ ENTRY(cpu_v7_switch_mm)
 #ifdef CONFIG_ARM_ERRATA_430973
         mcr     p15, 0, r2, c7, c5, 6           @ flush BTAC/BTB
 #endif
-        mrc     p15, 0, r2, c2, c0, 1           @ load TTB 1
-        mcr     p15, 0, r2, c2, c0, 0           @ into TTB 0
+#ifdef CONFIG_ARM_ERRATA_754322
+        dsb
+#endif
+        mcr     p15, 0, r2, c13, c0, 1          @ set reserved context ID
+        isb
+1:      mcr     p15, 0, r0, c2, c0, 0           @ set TTB 0
         isb
 #ifdef CONFIG_ARM_ERRATA_754322
         dsb
 #endif
         mcr     p15, 0, r1, c13, c0, 1          @ set context ID
         isb
-        mcr     p15, 0, r0, c2, c0, 0           @ set TTB 0
-        isb
 #endif
         mov     pc, lr
 ENDPROC(cpu_v7_switch_mm)
diff --git a/arch/arm/plat-mxc/avic.c b/arch/arm/plat-mxc/avic.c
index 09e2bd0fcdca..55d2534ec727 100644
--- a/arch/arm/plat-mxc/avic.c
+++ b/arch/arm/plat-mxc/avic.c
@@ -46,6 +46,8 @@
 #define AVIC_FIPNDH             0x60    /* fast int pending high */
 #define AVIC_FIPNDL             0x64    /* fast int pending low */
 
+#define AVIC_NUM_IRQS 64
+
 void __iomem *avic_base;
 
 #ifdef CONFIG_MXC_IRQ_PRIOR
@@ -54,7 +56,7 @@ static int avic_irq_set_priority(unsigned char irq, unsigned char prio)
         unsigned int temp;
         unsigned int mask = 0x0F << irq % 8 * 4;
 
-        if (irq >= MXC_INTERNAL_IRQS)
+        if (irq >= AVIC_NUM_IRQS)
                 return -EINVAL;;
 
         temp = __raw_readl(avic_base + AVIC_NIPRIORITY(irq / 8));
@@ -72,14 +74,14 @@ static int avic_set_irq_fiq(unsigned int irq, unsigned int type)
 {
         unsigned int irqt;
 
-        if (irq >= MXC_INTERNAL_IRQS)
+        if (irq >= AVIC_NUM_IRQS)
                 return -EINVAL;
 
-        if (irq < MXC_INTERNAL_IRQS / 2) {
+        if (irq < AVIC_NUM_IRQS / 2) {
                 irqt = __raw_readl(avic_base + AVIC_INTTYPEL) & ~(1 << irq);
                 __raw_writel(irqt | (!!type << irq), avic_base + AVIC_INTTYPEL);
         } else {
-                irq -= MXC_INTERNAL_IRQS / 2;
+                irq -= AVIC_NUM_IRQS / 2;
                 irqt = __raw_readl(avic_base + AVIC_INTTYPEH) & ~(1 << irq);
                 __raw_writel(irqt | (!!type << irq), avic_base + AVIC_INTTYPEH);
         }
@@ -138,7 +140,7 @@ void __init mxc_init_irq(void __iomem *irqbase)
         /* all IRQ no FIQ */
         __raw_writel(0, avic_base + AVIC_INTTYPEH);
         __raw_writel(0, avic_base + AVIC_INTTYPEL);
-        for (i = 0; i < MXC_INTERNAL_IRQS; i++) {
+        for (i = 0; i < AVIC_NUM_IRQS; i++) {
                 irq_set_chip_and_handler(i, &mxc_avic_chip.base,
                                          handle_level_irq);
                 set_irq_flags(i, IRQF_VALID);
diff --git a/arch/arm/plat-mxc/devices/platform-imx-dma.c b/arch/arm/plat-mxc/devices/platform-imx-dma.c
index 3538b85ede91..c64f015e031b 100644
--- a/arch/arm/plat-mxc/devices/platform-imx-dma.c
+++ b/arch/arm/plat-mxc/devices/platform-imx-dma.c
@@ -33,22 +33,22 @@ struct imx_imx_sdma_data {
 
 #ifdef CONFIG_SOC_IMX25
 struct imx_imx_sdma_data imx25_imx_sdma_data __initconst =
-        imx_imx_sdma_data_entry_single(MX25, 1, "imx25", 0);
+        imx_imx_sdma_data_entry_single(MX25, 2, "imx25", 1);
 #endif /* ifdef CONFIG_SOC_IMX25 */
 
 #ifdef CONFIG_SOC_IMX31
 struct imx_imx_sdma_data imx31_imx_sdma_data __initdata =
-        imx_imx_sdma_data_entry_single(MX31, 1, "imx31", 0);
+        imx_imx_sdma_data_entry_single(MX31, 1, "imx31", 1);
 #endif /* ifdef CONFIG_SOC_IMX31 */
 
 #ifdef CONFIG_SOC_IMX35
 struct imx_imx_sdma_data imx35_imx_sdma_data __initdata =
-        imx_imx_sdma_data_entry_single(MX35, 2, "imx35", 0);
+        imx_imx_sdma_data_entry_single(MX35, 2, "imx35", 1);
 #endif /* ifdef CONFIG_SOC_IMX35 */
 
 #ifdef CONFIG_SOC_IMX51
 struct imx_imx_sdma_data imx51_imx_sdma_data __initconst =
-        imx_imx_sdma_data_entry_single(MX51, 2, "imx51", 0);
+        imx_imx_sdma_data_entry_single(MX51, 2, "imx51", 1);
 #endif /* ifdef CONFIG_SOC_IMX51 */
 
 static struct platform_device __init __maybe_unused *imx_add_imx_sdma(
@@ -57,7 +57,7 @@ static struct platform_device __init __maybe_unused *imx_add_imx_sdma(
         struct resource res[] = {
                 {
                         .start = data->iobase,
-                        .end = data->iobase + SZ_4K - 1,
+                        .end = data->iobase + SZ_16K - 1,
                         .flags = IORESOURCE_MEM,
                 }, {
                         .start = data->irq,
@@ -77,7 +77,7 @@ static struct platform_device __init __maybe_unused *imx_add_imx_dma(void)
 }
 
 #ifdef CONFIG_ARCH_MX25
-static struct sdma_script_start_addrs addr_imx25_to1 = {
+static struct sdma_script_start_addrs addr_imx25 = {
         .ap_2_ap_addr = 729,
         .uart_2_mcu_addr = 904,
         .per_2_app_addr = 1255,
@@ -139,7 +139,7 @@ static struct sdma_script_start_addrs addr_imx35_to2 = {
 #endif
 
 #ifdef CONFIG_SOC_IMX51
-static struct sdma_script_start_addrs addr_imx51_to1 = {
+static struct sdma_script_start_addrs addr_imx51 = {
         .ap_2_ap_addr = 642,
         .uart_2_mcu_addr = 817,
         .mcu_2_app_addr = 747,
@@ -165,7 +165,7 @@ static int __init imxXX_add_imx_dma(void)
 
 #if defined(CONFIG_SOC_IMX25)
         if (cpu_is_mx25()) {
-                imx25_imx_sdma_data.pdata.script_addrs = &addr_imx25_to1;
+                imx25_imx_sdma_data.pdata.script_addrs = &addr_imx25;
                 ret = imx_add_imx_sdma(&imx25_imx_sdma_data);
         } else
 #endif
@@ -196,7 +196,9 @@ static int __init imxXX_add_imx_dma(void)
 
 #if defined(CONFIG_SOC_IMX51)
         if (cpu_is_mx51()) {
-                imx51_imx_sdma_data.pdata.script_addrs = &addr_imx51_to1;
+                int to_version = mx51_revision() >> 4;
+                imx51_imx_sdma_data.pdata.to_version = to_version;
+                imx51_imx_sdma_data.pdata.script_addrs = &addr_imx51;
                 ret = imx_add_imx_sdma(&imx51_imx_sdma_data);
         } else
 #endif
diff --git a/arch/arm/plat-mxc/devices/platform-imx-ssi.c b/arch/arm/plat-mxc/devices/platform-imx-ssi.c
index 2569c8d8a2ef..66b8593e9b69 100644
--- a/arch/arm/plat-mxc/devices/platform-imx-ssi.c
+++ b/arch/arm/plat-mxc/devices/platform-imx-ssi.c
@@ -69,7 +69,7 @@ const struct imx_imx_ssi_data imx35_imx_ssi_data[] __initconst = {
 #ifdef CONFIG_SOC_IMX51
 const struct imx_imx_ssi_data imx51_imx_ssi_data[] __initconst = {
 #define imx51_imx_ssi_data_entry(_id, _hwid)                            \
-        imx_imx_ssi_data_entry(MX51, _id, _hwid, SZ_4K)
+        imx_imx_ssi_data_entry(MX51, _id, _hwid, SZ_16K)
         imx51_imx_ssi_data_entry(0, 1),
         imx51_imx_ssi_data_entry(1, 2),
         imx51_imx_ssi_data_entry(2, 3),
diff --git a/arch/arm/plat-mxc/include/mach/debug-macro.S b/arch/arm/plat-mxc/include/mach/debug-macro.S
index 8e8d175e5077..91fc7cdb5dc9 100644
--- a/arch/arm/plat-mxc/include/mach/debug-macro.S
+++ b/arch/arm/plat-mxc/include/mach/debug-macro.S
@@ -12,32 +12,32 @@
  */
 #include <mach/hardware.h>
 
-#ifdef CONFIG_ARCH_MX1
+#ifdef CONFIG_SOC_IMX1
 #define UART_PADDR      MX1_UART1_BASE_ADDR
 #endif
 
-#ifdef CONFIG_ARCH_MX25
+#ifdef CONFIG_SOC_IMX25
 #ifdef UART_PADDR
 #error "CONFIG_DEBUG_LL is incompatible with multiple archs"
 #endif
 #define UART_PADDR      MX25_UART1_BASE_ADDR
 #endif
 
-#ifdef CONFIG_ARCH_MX2
+#if defined(CONFIG_SOC_IMX21) || defined (CONFIG_SOC_IMX27)
 #ifdef UART_PADDR
 #error "CONFIG_DEBUG_LL is incompatible with multiple archs"
 #endif
 #define UART_PADDR      MX2x_UART1_BASE_ADDR
 #endif
 
-#ifdef CONFIG_ARCH_MX3
+#if defined(CONFIG_SOC_IMX31) || defined(CONFIG_SOC_IMX35)
 #ifdef UART_PADDR
 #error "CONFIG_DEBUG_LL is incompatible with multiple archs"
 #endif
 #define UART_PADDR      MX3x_UART1_BASE_ADDR
 #endif
 
-#ifdef CONFIG_ARCH_MX5
+#ifdef CONFIG_SOC_IMX51
 #ifdef UART_PADDR
 #error "CONFIG_DEBUG_LL is incompatible with multiple archs"
 #endif
diff --git a/arch/arm/plat-mxc/include/mach/hardware.h b/arch/arm/plat-mxc/include/mach/hardware.h
index 67d3e2bed065..a8bfd565dcad 100644
--- a/arch/arm/plat-mxc/include/mach/hardware.h
+++ b/arch/arm/plat-mxc/include/mach/hardware.h
@@ -97,35 +97,17 @@
 
 #include <mach/mxc.h>
 
-#ifdef CONFIG_ARCH_MX5
 #include <mach/mx50.h>
 #include <mach/mx51.h>
 #include <mach/mx53.h>
-#endif
-
-#ifdef CONFIG_ARCH_MX3
 #include <mach/mx3x.h>
 #include <mach/mx31.h>
 #include <mach/mx35.h>
-#endif
-
-#ifdef CONFIG_ARCH_MX2
-# include <mach/mx2x.h>
-# ifdef CONFIG_MACH_MX21
-#  include <mach/mx21.h>
-# endif
-# ifdef CONFIG_MACH_MX27
-#  include <mach/mx27.h>
-# endif
-#endif
-
-#ifdef CONFIG_ARCH_MX1
-# include <mach/mx1.h>
-#endif
-
-#ifdef CONFIG_ARCH_MX25
-# include <mach/mx25.h>
-#endif
+#include <mach/mx2x.h>
+#include <mach/mx21.h>
+#include <mach/mx27.h>
+#include <mach/mx1.h>
+#include <mach/mx25.h>
 
 #define imx_map_entry(soc, name, _type) {                               \
         .virtual = soc ## _IO_P2V(soc ## _ ## name ## _BASE_ADDR),      \
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx53.h b/arch/arm/plat-mxc/include/mach/iomux-mx53.h
index e95d9cb8aeb7..e11dd5f09c34 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx53.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx53.h
@@ -39,7 +39,7 @@
 #define _MX53_PAD_GPIO_19__ECSPI1_RDY   IOMUX_PAD(0x348, 0x20, 5, 0x0, 0, 0)
 #define _MX53_PAD_GPIO_19__FEC_TDATA_3  IOMUX_PAD(0x348, 0x20, 6, 0x0, 0, 0)
 #define _MX53_PAD_GPIO_19__SRC_INT_BOOT IOMUX_PAD(0x348, 0x20,7, 0x0, 0, 0)
-#define _MX53_PAD_KEY_COL0__KPP_COL_0   IOMUX_PAD(0x34C, 0x24, o, 0x0, 0, 0)
+#define _MX53_PAD_KEY_COL0__KPP_COL_0   IOMUX_PAD(0x34C, 0x24, 0, 0x0, 0, 0)
 #define _MX53_PAD_KEY_COL0__GPIO4_6             IOMUX_PAD(0x34C, 0x24, 1, 0x0, 0, 0)
 #define _MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC     IOMUX_PAD(0x34C, 0x24, 2, 0x758, 0, 0)
 #define _MX53_PAD_KEY_COL0__UART4_TXD_MUX       IOMUX_PAD(0x34C, 0x24, 4, 0x890, 0, 0)
@@ -697,7 +697,7 @@
 #define _MX53_PAD_EIM_DA5__GPIO3_5                      IOMUX_PAD(0x500, 0x1B0, 1, 0x0, 0, 0)
 #define _MX53_PAD_EIM_DA5__IPU_DISP1_DAT_4              IOMUX_PAD(0x500, 0x1B0, 3, 0x0, 0, 0)
 #define _MX53_PAD_EIM_DA5__IPU_CSI1_D_4         IOMUX_PAD(0x500, 0x1B0, 4, 0x0, 0, 0)
-#define _MX53_PAD_EIM_DA5__SRC_BT_CFG3_6                IOMUX_PAD(0x500, 0x1B0, 17, 0x0, 0, 0)
+#define _MX53_PAD_EIM_DA5__SRC_BT_CFG3_6                IOMUX_PAD(0x500, 0x1B0, 7 | IOMUX_CONFIG_SION, 0x0, 0, 0)
 #define _MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6   IOMUX_PAD(0x504, 0x1B4, 0, 0x0, 0, 0)
 #define _MX53_PAD_EIM_DA6__GPIO3_6                      IOMUX_PAD(0x504, 0x1B4, 1, 0x0, 0, 0)
 #define _MX53_PAD_EIM_DA6__IPU_DISP1_DAT_3              IOMUX_PAD(0x504, 0x1B4, 3, 0x0, 0, 0)
@@ -958,12 +958,12 @@
 #define _MX53_PAD_PATA_DATA5__ESDHC4_DAT5               IOMUX_PAD(0x63C, 0x2B8, 4, 0x0, 0, 0)
 #define _MX53_PAD_PATA_DATA5__GPU3d_GPU_DEBUG_OUT_5     IOMUX_PAD(0x63C, 0x2B8, 5, 0x0, 0, 0)
 #define _MX53_PAD_PATA_DATA5__IPU_DIAG_BUS_5    IOMUX_PAD(0x63C, 0x2B8, 6, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA6__PATA_DATA_6       IOMUX_PAD(0x640, 0x2BC, 1, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DATA6__PATA_DATA_6       IOMUX_PAD(0x640, 0x2BC, 0, 0x0, 0, 0)
 #define _MX53_PAD_PATA_DATA6__GPIO2_6           IOMUX_PAD(0x640, 0x2BC, 1, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA6__EMI_NANDF_D_6     IOMUX_PAD(0x640, 0x2BC, 1, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA6__ESDHC4_DAT6               IOMUX_PAD(0x640, 0x2BC, 1, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA6__GPU3d_GPU_DEBUG_OUT_6     IOMUX_PAD(0x640, 0x2BC, 1, 0x0, 0, 0)
-#define _MX53_PAD_PATA_DATA6__IPU_DIAG_BUS_6    IOMUX_PAD(0x640, 0x2BC, 1, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DATA6__EMI_NANDF_D_6     IOMUX_PAD(0x640, 0x2BC, 3, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DATA6__ESDHC4_DAT6               IOMUX_PAD(0x640, 0x2BC, 4, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DATA6__GPU3d_GPU_DEBUG_OUT_6     IOMUX_PAD(0x640, 0x2BC, 5, 0x0, 0, 0)
+#define _MX53_PAD_PATA_DATA6__IPU_DIAG_BUS_6    IOMUX_PAD(0x640, 0x2BC, 6, 0x0, 0, 0)
 #define _MX53_PAD_PATA_DATA7__PATA_DATA_7               IOMUX_PAD(0x644, 0x2C0, 0, 0x0, 0, 0)
 #define _MX53_PAD_PATA_DATA7__GPIO2_7           IOMUX_PAD(0x644, 0x2C0, 1, 0x0, 0, 0)
 #define _MX53_PAD_PATA_DATA7__EMI_NANDF_D_7     IOMUX_PAD(0x644, 0x2C0, 3, 0x0, 0, 0)
diff --git a/arch/arm/plat-mxc/include/mach/iomux-v1.h b/arch/arm/plat-mxc/include/mach/iomux-v1.h
index c07d30210c57..6fa8a707b9a0 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-v1.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-v1.h
@@ -85,9 +85,6 @@
 #define GPIO_BOUT_0     (2 << GPIO_BOUT_SHIFT)
 #define GPIO_BOUT_1     (3 << GPIO_BOUT_SHIFT)
 
-/* decode irq number to use with IMR(x), ISR(x) and friends */
-#define IRQ_TO_REG(irq) ((irq - MXC_INTERNAL_IRQS) >> 5)
-
 #define IRQ_GPIOA(x)  (MXC_GPIO_IRQ_START + x)
 #define IRQ_GPIOB(x)  (IRQ_GPIOA(32) + x)
 #define IRQ_GPIOC(x)  (IRQ_GPIOB(32) + x)
@@ -98,7 +95,6 @@
 extern int mxc_gpio_mode(int gpio_mode);
 extern int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
                 const char *label);
-extern void mxc_gpio_release_multiple_pins(const int *pin_list, int count);
 
 extern int __init imx_iomuxv1_init(void __iomem *base, int numports);
 
diff --git a/arch/arm/plat-mxc/include/mach/iomux-v3.h b/arch/arm/plat-mxc/include/mach/iomux-v3.h
index 82620af1922f..ebbce33097a7 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-v3.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-v3.h
@@ -66,7 +66,6 @@ typedef u64 iomux_v3_cfg_t;
 #define MUX_MODE_MASK           ((iomux_v3_cfg_t)0x1f << MUX_MODE_SHIFT)
 #define MUX_PAD_CTRL_SHIFT      41
 #define MUX_PAD_CTRL_MASK       ((iomux_v3_cfg_t)0x1ffff << MUX_PAD_CTRL_SHIFT)
-#define NO_PAD_CTRL             ((iomux_v3_cfg_t)1 << (MUX_PAD_CTRL_SHIFT + 16))
 #define MUX_SEL_INPUT_SHIFT     58
 #define MUX_SEL_INPUT_MASK      ((iomux_v3_cfg_t)0xf << MUX_SEL_INPUT_SHIFT)
 
@@ -85,6 +84,7 @@ typedef u64 iomux_v3_cfg_t;
  * Use to set PAD control
  */
 
+#define NO_PAD_CTRL                     (1 << 16)
 #define PAD_CTL_DVS                     (1 << 13)
 #define PAD_CTL_HYS                     (1 << 8)
 
diff --git a/arch/arm/plat-mxc/include/mach/iomux.h b/arch/arm/plat-mxc/include/mach/iomux.h
deleted file mode 100644
index 3d226d7e7be2..000000000000
--- a/arch/arm/plat-mxc/include/mach/iomux.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * Copyright (C) 2010 Uwe Kleine-Koenig, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-#ifndef __MACH_IOMUX_H__
-#define __MACH_IOMUX_H__
-
-/* This file will go away, please include mach/iomux-mx... directly */
-
-#ifdef CONFIG_ARCH_MX1
-#include <mach/iomux-mx1.h>
-#endif
-#ifdef CONFIG_ARCH_MX2
-#include <mach/iomux-mx2x.h>
-#ifdef CONFIG_MACH_MX21
-#include <mach/iomux-mx21.h>
-#endif
-#ifdef CONFIG_MACH_MX27
-#include <mach/iomux-mx27.h>
-#endif
-#endif
-
-#endif /* __MACH_IOMUX_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx53.h b/arch/arm/plat-mxc/include/mach/mx53.h
index 9d2a1ef84de2..74cd093203e0 100644
--- a/arch/arm/plat-mxc/include/mach/mx53.h
+++ b/arch/arm/plat-mxc/include/mach/mx53.h
@@ -145,14 +145,14 @@
 /*
  * Memory regions and CS
  */
-#define MX53_CSD0_BASE_ADDR             0x90000000
-#define MX53_CSD1_BASE_ADDR             0xA0000000
-#define MX53_CS0_BASE_ADDR              0xB0000000
-#define MX53_CS1_BASE_ADDR              0xB8000000
-#define MX53_CS2_BASE_ADDR              0xC0000000
-#define MX53_CS3_BASE_ADDR              0xC8000000
-#define MX53_CS4_BASE_ADDR              0xCC000000
-#define MX53_CS5_BASE_ADDR              0xCE000000
+#define MX53_CSD0_BASE_ADDR             0x70000000
+#define MX53_CSD1_BASE_ADDR             0xB0000000
+#define MX53_CS0_BASE_ADDR              0xF0000000
+#define MX53_CS1_32MB_BASE_ADDR 0xF2000000
+#define MX53_CS1_64MB_BASE_ADDR         0xF4000000
+#define MX53_CS2_64MB_BASE_ADDR         0xF4000000
+#define MX53_CS2_96MB_BASE_ADDR         0xF6000000
+#define MX53_CS3_BASE_ADDR              0xF6000000
 
 #define MX53_IO_P2V(x)                  IMX_IO_P2V(x)
 #define MX53_IO_ADDRESS(x)              IOMEM(MX53_IO_P2V(x))
@@ -233,7 +233,7 @@
 #define MX53_INT_ESDHC2 2
 #define MX53_INT_ESDHC3 3
 #define MX53_INT_ESDHC4 4
-#define MX53_INT_RESV5  5
+#define MX53_INT_DAP    5
 #define MX53_INT_SDMA   6
 #define MX53_INT_IOMUX  7
 #define MX53_INT_NFC    8
@@ -262,8 +262,8 @@
 #define MX53_INT_UART1  31
 #define MX53_INT_UART2  32
 #define MX53_INT_UART3  33
-#define MX53_INT_RESV34 34
-#define MX53_INT_RESV35 35
+#define MX53_INT_RTC    34
+#define MX53_INT_PTP    35
 #define MX53_INT_ECSPI1 36
 #define MX53_INT_ECSPI2 37
 #define MX53_INT_CSPI   38
@@ -293,8 +293,8 @@
 #define MX53_INT_I2C1   62
 #define MX53_INT_I2C2   63
 #define MX53_INT_I2C3   64
-#define MX53_INT_RESV65 65
-#define MX53_INT_RESV66 66
+#define MX53_INT_MLB    65
+#define MX53_INT_ASRC   66
 #define MX53_INT_SPDIF  67
 #define MX53_INT_SIM_DAT        68
 #define MX53_INT_IIM    69
diff --git a/arch/arm/plat-mxc/include/mach/mxc.h b/arch/arm/plat-mxc/include/mach/mxc.h
index 4ac53ce97c24..09879235a9f5 100644
--- a/arch/arm/plat-mxc/include/mach/mxc.h
+++ b/arch/arm/plat-mxc/include/mach/mxc.h
@@ -68,7 +68,7 @@
 extern unsigned int __mxc_cpu_type;
 #endif
 
-#ifdef CONFIG_ARCH_MX1
+#ifdef CONFIG_SOC_IMX1
 # ifdef mxc_cpu_type
 #  undef mxc_cpu_type
 #  define mxc_cpu_type __mxc_cpu_type
@@ -80,7 +80,7 @@ extern unsigned int __mxc_cpu_type;
 # define cpu_is_mx1()           (0)
 #endif
 
-#ifdef CONFIG_MACH_MX21
+#ifdef CONFIG_SOC_IMX21
 # ifdef mxc_cpu_type
 #  undef mxc_cpu_type
 #  define mxc_cpu_type __mxc_cpu_type
@@ -92,7 +92,7 @@ extern unsigned int __mxc_cpu_type;
 # define cpu_is_mx21()          (0)
 #endif
 
-#ifdef CONFIG_ARCH_MX25
+#ifdef CONFIG_SOC_IMX25
 # ifdef mxc_cpu_type
 #  undef mxc_cpu_type
 #  define mxc_cpu_type __mxc_cpu_type
@@ -104,7 +104,7 @@ extern unsigned int __mxc_cpu_type;
 # define cpu_is_mx25()          (0)
 #endif
 
-#ifdef CONFIG_MACH_MX27
+#ifdef CONFIG_SOC_IMX27
 # ifdef mxc_cpu_type
 #  undef mxc_cpu_type
 #  define mxc_cpu_type __mxc_cpu_type
diff --git a/arch/arm/plat-mxc/include/mach/timex.h b/arch/arm/plat-mxc/include/mach/timex.h
index d61d5c74817c..10343d1f87e1 100644
--- a/arch/arm/plat-mxc/include/mach/timex.h
+++ b/arch/arm/plat-mxc/include/mach/timex.h
@@ -16,16 +16,7 @@
 #ifndef __ASM_ARCH_MXC_TIMEX_H__
 #define __ASM_ARCH_MXC_TIMEX_H__
 
-#if defined CONFIG_ARCH_MX1
-#define CLOCK_TICK_RATE         16000000
-#elif defined CONFIG_ARCH_MX2
-#define CLOCK_TICK_RATE         13300000
-#elif defined CONFIG_ARCH_MX3
-#define CLOCK_TICK_RATE         16625000
-#elif defined CONFIG_ARCH_MX25
-#define CLOCK_TICK_RATE         16000000
-#elif defined CONFIG_ARCH_MX5
-#define CLOCK_TICK_RATE         8000000
-#endif
+/* Bogus value */
+#define CLOCK_TICK_RATE 12345678
 
 #endif                          /* __ASM_ARCH_MXC_TIMEX_H__ */
diff --git a/arch/arm/plat-mxc/iomux-v1.c b/arch/arm/plat-mxc/iomux-v1.c
index 3238c10d4e02..1f73963bc13e 100644
--- a/arch/arm/plat-mxc/iomux-v1.c
+++ b/arch/arm/plat-mxc/iomux-v1.c
@@ -157,7 +157,7 @@ EXPORT_SYMBOL(mxc_gpio_mode);
 static int imx_iomuxv1_setup_multiple(const int *list, unsigned count)
 {
         size_t i;
-        int ret;
+        int ret = 0;
 
         for (i = 0; i < count; ++i) {
                 ret = mxc_gpio_mode(list[i]);
@@ -172,45 +172,13 @@ static int imx_iomuxv1_setup_multiple(const int *list, unsigned count)
 int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
                 const char *label)
 {
-        size_t i;
         int ret;
 
-        for (i = 0; i < count; ++i) {
-                unsigned gpio = pin_list[i] & (GPIO_PIN_MASK | GPIO_PORT_MASK);
-
-                ret = gpio_request(gpio, label);
-                if (ret)
-                        goto err_gpio_request;
-        }
-
         ret = imx_iomuxv1_setup_multiple(pin_list, count);
-        if (ret)
-                goto err_setup;
-
-        return 0;
-
-err_setup:
-        BUG_ON(i != count);
-
-err_gpio_request:
-        mxc_gpio_release_multiple_pins(pin_list, i);
-
         return ret;
 }
 EXPORT_SYMBOL(mxc_gpio_setup_multiple_pins);
 
-void mxc_gpio_release_multiple_pins(const int *pin_list, int count)
-{
-        size_t i;
-
-        for (i = 0; i < count; ++i) {
-                unsigned gpio = pin_list[i] & (GPIO_PIN_MASK | GPIO_PORT_MASK);
-
-                gpio_free(gpio);
-        }
-}
-EXPORT_SYMBOL(mxc_gpio_release_multiple_pins);
-
 int __init imx_iomuxv1_init(void __iomem *base, int numports)
 {
         imx_iomuxv1_baseaddr = base;
diff --git a/arch/arm/plat-mxc/pwm.c b/arch/arm/plat-mxc/pwm.c
index 7a61ef8f471a..761c3c940a68 100644
--- a/arch/arm/plat-mxc/pwm.c
+++ b/arch/arm/plat-mxc/pwm.c
@@ -214,14 +214,14 @@ static int __devinit mxc_pwm_probe(struct platform_device *pdev)
                 goto err_free_clk;
         }
 
-        r = request_mem_region(r->start, r->end - r->start + 1, pdev->name);
+        r = request_mem_region(r->start, resource_size(r), pdev->name);
         if (r == NULL) {
                 dev_err(&pdev->dev, "failed to request memory resource\n");
                 ret = -EBUSY;
                 goto err_free_clk;
         }
 
-        pwm->mmio_base = ioremap(r->start, r->end - r->start + 1);
+        pwm->mmio_base = ioremap(r->start, resource_size(r));
         if (pwm->mmio_base == NULL) {
                 dev_err(&pdev->dev, "failed to ioremap() registers\n");
                 ret = -ENODEV;
@@ -236,7 +236,7 @@ static int __devinit mxc_pwm_probe(struct platform_device *pdev)
         return 0;
 
 err_free_mem:
-        release_mem_region(r->start, r->end - r->start + 1);
+        release_mem_region(r->start, resource_size(r));
 err_free_clk:
         clk_put(pwm->clk);
 err_free:
@@ -260,7 +260,7 @@ static int __devexit mxc_pwm_remove(struct platform_device *pdev)
         iounmap(pwm->mmio_base);
 
         r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-        release_mem_region(r->start, r->end - r->start + 1);
+        release_mem_region(r->start, resource_size(r));
 
         clk_put(pwm->clk);
 
diff --git a/arch/arm/plat-mxc/tzic.c b/arch/arm/plat-mxc/tzic.c
index 57f9395f87ce..710f2e7da4ce 100644
--- a/arch/arm/plat-mxc/tzic.c
+++ b/arch/arm/plat-mxc/tzic.c
@@ -49,6 +49,8 @@
 
 void __iomem *tzic_base; /* Used as irq controller base in entry-macro.S */
 
+#define TZIC_NUM_IRQS 128
+
 #ifdef CONFIG_FIQ
 static int tzic_set_irq_fiq(unsigned int irq, unsigned int type)
 {
@@ -166,7 +168,7 @@ void __init tzic_init_irq(void __iomem *irqbase)
 
         /* all IRQ no FIQ Warning :: No selection */
 
-        for (i = 0; i < MXC_INTERNAL_IRQS; i++) {
+        for (i = 0; i < TZIC_NUM_IRQS; i++) {
                 irq_set_chip_and_handler(i, &mxc_tzic_chip.base,
                                          handle_level_irq);
                 set_irq_flags(i, IRQF_VALID);
diff --git a/arch/arm/plat-nomadik/include/plat/gpio.h b/arch/arm/plat-nomadik/include/plat/gpio.h
index ea19a5b2f227..d5d7e651269c 100644
--- a/arch/arm/plat-nomadik/include/plat/gpio.h
+++ b/arch/arm/plat-nomadik/include/plat/gpio.h
@@ -90,6 +90,7 @@ struct nmk_gpio_platform_data {
         int num_gpio;
         u32 (*get_secondary_status)(unsigned int bank);
         void (*set_ioforce)(bool enable);
+        bool supports_sleepmode;
 };
 
 #endif /* __ASM_PLAT_GPIO_H */
diff --git a/arch/arm/plat-omap/include/plat/flash.h b/arch/arm/plat-omap/include/plat/flash.h
index 3083195123ea..0d88499b79e9 100644
--- a/arch/arm/plat-omap/include/plat/flash.h
+++ b/arch/arm/plat-omap/include/plat/flash.h
@@ -11,6 +11,7 @@
 
 #include <linux/mtd/map.h>
 
+struct platform_device;
 extern void omap1_set_vpp(struct platform_device *pdev, int enable);
 
 #endif
diff --git a/arch/arm/plat-omap/include/plat/iovmm.h b/arch/arm/plat-omap/include/plat/iovmm.h
index 32a2f6c4d39e..e992b9655fbc 100644
--- a/arch/arm/plat-omap/include/plat/iovmm.h
+++ b/arch/arm/plat-omap/include/plat/iovmm.h
@@ -29,9 +29,6 @@ struct iovm_struct {
  * lower 16 bit is used for h/w and upper 16 bit is for s/w.
  */
 #define IOVMF_SW_SHIFT          16
-#define IOVMF_HW_SIZE           (1 << IOVMF_SW_SHIFT)
-#define IOVMF_HW_MASK           (IOVMF_HW_SIZE - 1)
-#define IOVMF_SW_MASK           (~IOVMF_HW_MASK)UL
 
 /*
  * iovma: h/w flags derived from cam and ram attribute
diff --git a/arch/arm/plat-omap/include/plat/mmc.h b/arch/arm/plat-omap/include/plat/mmc.h
index f38fef9f1310..c7b874186c27 100644
--- a/arch/arm/plat-omap/include/plat/mmc.h
+++ b/arch/arm/plat-omap/include/plat/mmc.h
@@ -101,6 +101,9 @@ struct omap_mmc_platform_data {
                 /* If using power_saving and the MMC power is not to go off */
                 unsigned no_off:1;
 
+                /* eMMC does not handle power off when not in sleep state */
+                unsigned no_regulator_off_init:1;
+
                 /* Regulator off remapped to sleep */
                 unsigned vcc_aux_disable_is_sleep:1;
 
diff --git a/arch/arm/plat-omap/iovmm.c b/arch/arm/plat-omap/iovmm.c
index 51ef43e8def6..83a37c54342f 100644
--- a/arch/arm/plat-omap/iovmm.c
+++ b/arch/arm/plat-omap/iovmm.c
@@ -648,7 +648,6 @@ u32 iommu_vmap(struct iommu *obj, u32 da, const struct sg_table *sgt,
                         return PTR_ERR(va);
         }
 
-        flags &= IOVMF_HW_MASK;
         flags |= IOVMF_DISCONT;
         flags |= IOVMF_MMIO;
 
@@ -706,7 +705,6 @@ u32 iommu_vmalloc(struct iommu *obj, u32 da, size_t bytes, u32 flags)
         if (!va)
                 return -ENOMEM;
 
-        flags &= IOVMF_HW_MASK;
         flags |= IOVMF_DISCONT;
         flags |= IOVMF_ALLOC;
 
@@ -795,7 +793,6 @@ u32 iommu_kmap(struct iommu *obj, u32 da, u32 pa, size_t bytes,
         if (!va)
                 return -ENOMEM;
 
-        flags &= IOVMF_HW_MASK;
         flags |= IOVMF_LINEAR;
         flags |= IOVMF_MMIO;
 
@@ -853,7 +850,6 @@ u32 iommu_kmalloc(struct iommu *obj, u32 da, size_t bytes, u32 flags)
                 return -ENOMEM;
         pa = virt_to_phys(va);
 
-        flags &= IOVMF_HW_MASK;
         flags |= IOVMF_LINEAR;
         flags |= IOVMF_ALLOC;
 
diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/plat-omap/omap_device.c
index a37b8eb65b76..49fc0df0c21f 100644
--- a/arch/arm/plat-omap/omap_device.c
+++ b/arch/arm/plat-omap/omap_device.c
@@ -84,6 +84,7 @@
 #include <linux/io.h>
 #include <linux/clk.h>
 #include <linux/clkdev.h>
+#include <linux/pm_runtime.h>
 
 #include <plat/omap_device.h>
 #include <plat/omap_hwmod.h>
@@ -539,20 +540,34 @@ int omap_early_device_register(struct omap_device *od)
 static int _od_runtime_suspend(struct device *dev)
 {
         struct platform_device *pdev = to_platform_device(dev);
+        int ret;
+
+        ret = pm_generic_runtime_suspend(dev);
+
+        if (!ret)
+                omap_device_idle(pdev);
+
+        return ret;
+}
 
-        return omap_device_idle(pdev);
+static int _od_runtime_idle(struct device *dev)
+{
+        return pm_generic_runtime_idle(dev);
 }
 
 static int _od_runtime_resume(struct device *dev)
 {
         struct platform_device *pdev = to_platform_device(dev);
 
-        return omap_device_enable(pdev);
+        omap_device_enable(pdev);
+
+        return pm_generic_runtime_resume(dev);
 }
 
 static struct dev_power_domain omap_device_power_domain = {
         .ops = {
                 .runtime_suspend = _od_runtime_suspend,
+                .runtime_idle = _od_runtime_idle,
                 .runtime_resume = _od_runtime_resume,
                 USE_PLATFORM_PM_SLEEP_OPS
         }
diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
index a3f50b34a90d..6af3d0b1f8d0 100644
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -166,7 +166,7 @@ static void __init omap_detect_sram(void)
                 else if (cpu_is_omap1611())
                         omap_sram_size = SZ_256K;
                 else {
-                        printk(KERN_ERR "Could not detect SRAM size\n");
+                        pr_err("Could not detect SRAM size\n");
                         omap_sram_size = 0x4000;
                 }
         }
@@ -221,10 +221,10 @@ static void __init omap_map_sram(void)
         omap_sram_io_desc[0].length = ROUND_DOWN(omap_sram_size, PAGE_SIZE);
         iotable_init(omap_sram_io_desc, ARRAY_SIZE(omap_sram_io_desc));
 
-        printk(KERN_INFO "SRAM: Mapped pa 0x%08lx to va 0x%08lx size: 0x%lx\n",
-        __pfn_to_phys(omap_sram_io_desc[0].pfn),
-        omap_sram_io_desc[0].virtual,
-               omap_sram_io_desc[0].length);
+        pr_info("SRAM: Mapped pa 0x%08llx to va 0x%08lx size: 0x%lx\n",
+                (long long) __pfn_to_phys(omap_sram_io_desc[0].pfn),
+                omap_sram_io_desc[0].virtual,
+                omap_sram_io_desc[0].length);
 
         /*
          * Normally devicemaps_init() would flush caches and tlb after
@@ -252,7 +252,7 @@ static void __init omap_map_sram(void)
 void *omap_sram_push_address(unsigned long size)
 {
         if (size > (omap_sram_ceil - (omap_sram_base + SRAM_BOOTLOADER_SZ))) {
-                printk(KERN_ERR "Not enough space in SRAM\n");
+                pr_err("Not enough space in SRAM\n");
                 return NULL;
         }
 
diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c
index c10d10c56e2e..2abf9660bc6c 100644
--- a/arch/arm/plat-s3c24xx/dma.c
+++ b/arch/arm/plat-s3c24xx/dma.c
@@ -1199,7 +1199,7 @@ EXPORT_SYMBOL(s3c2410_dma_getposition);
 
 #ifdef CONFIG_PM
 
-static void s3c2410_dma_suspend_chan(s3c2410_dma_chan *cp)
+static void s3c2410_dma_suspend_chan(struct s3c2410_dma_chan *cp)
 {
         printk(KERN_DEBUG "suspending dma channel %d\n", cp->number);
 
diff --git a/arch/arm/plat-s3c24xx/irq.c b/arch/arm/plat-s3c24xx/irq.c
index 9aee7e1668b1..fc8c5f89954d 100644
--- a/arch/arm/plat-s3c24xx/irq.c
+++ b/arch/arm/plat-s3c24xx/irq.c
@@ -23,6 +23,7 @@
 #include <linux/interrupt.h>
 #include <linux/ioport.h>
 #include <linux/sysdev.h>
+#include <linux/syscore_ops.h>
 
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
@@ -668,3 +669,8 @@ void __init s3c24xx_init_irq(void)
 
         irqdbf("s3c2410: registered interrupt handlers\n");
 }
+
+struct syscore_ops s3c24xx_irq_syscore_ops = {
+        .suspend        = s3c24xx_irq_suspend,
+        .resume         = s3c24xx_irq_resume,
+};
diff --git a/arch/arm/plat-s5p/dev-onenand.c b/arch/arm/plat-s5p/dev-onenand.c
index 6db926202caa..20336c8f2479 100644
--- a/arch/arm/plat-s5p/dev-onenand.c
+++ b/arch/arm/plat-s5p/dev-onenand.c
@@ -15,8 +15,6 @@
 
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/onenand.h>
 
 #include <mach/irqs.h>
 #include <mach/map.h>
@@ -45,13 +43,3 @@ struct platform_device s5p_device_onenand = {
         .num_resources  = ARRAY_SIZE(s5p_onenand_resources),
         .resource       = s5p_onenand_resources,
 };
-
-void s5p_onenand_set_platdata(struct onenand_platform_data *pdata)
-{
-        struct onenand_platform_data *pd;
-
-        pd = kmemdup(pdata, sizeof(struct onenand_platform_data), GFP_KERNEL);
-        if (!pd)
-                printk(KERN_ERR "%s: no memory for platform data\n", __func__);
-        s5p_device_onenand.dev.platform_data = pd;
-}
diff --git a/arch/arm/plat-s5p/include/plat/map-s5p.h b/arch/arm/plat-s5p/include/plat/map-s5p.h
index a6c3d327ce72..d973d39666a3 100644
--- a/arch/arm/plat-s5p/include/plat/map-s5p.h
+++ b/arch/arm/plat-s5p/include/plat/map-s5p.h
@@ -39,7 +39,7 @@
 #define S5P_VA_TWD              S5P_VA_COREPERI(0x600)
 #define S5P_VA_GIC_DIST         S5P_VA_COREPERI(0x1000)
 
-#define S5P_VA_USB_HSPHY        S3C_ADDR(0x02900000)
+#define S3C_VA_USB_HSPHY        S3C_ADDR(0x02900000)
 
 #define VA_VIC(x)               (S3C_VA_IRQ + ((x) * 0x10000))
 #define VA_VIC0                 VA_VIC(0)
diff --git a/arch/arm/plat-samsung/dev-onenand.c b/arch/arm/plat-samsung/dev-onenand.c
index 45ec73287d8c..f54ae71f0cd2 100644
--- a/arch/arm/plat-samsung/dev-onenand.c
+++ b/arch/arm/plat-samsung/dev-onenand.c
@@ -13,8 +13,6 @@
 
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/onenand.h>
 
 #include <mach/irqs.h>
 #include <mach/map.h>
@@ -43,13 +41,3 @@ struct platform_device s3c_device_onenand = {
         .num_resources  = ARRAY_SIZE(s3c_onenand_resources),
         .resource       = s3c_onenand_resources,
 };
-
-void s3c_onenand_set_platdata(struct onenand_platform_data *pdata)
-{
-        struct onenand_platform_data *pd;
-
-        pd = kmemdup(pdata, sizeof(struct onenand_platform_data), GFP_KERNEL);
-        if (!pd)
-                printk(KERN_ERR "%s: no memory for platform data\n", __func__);
-        s3c_device_onenand.dev.platform_data = pd;
-}
diff --git a/arch/arm/plat-samsung/include/plat/devs.h b/arch/arm/plat-samsung/include/plat/devs.h
index b61b8ee7cc52..4af108ff4112 100644
--- a/arch/arm/plat-samsung/include/plat/devs.h
+++ b/arch/arm/plat-samsung/include/plat/devs.h
@@ -75,10 +75,8 @@ extern struct platform_device s5pc100_device_spi1;
 extern struct platform_device s5pc100_device_spi2;
 extern struct platform_device s5pv210_device_spi0;
 extern struct platform_device s5pv210_device_spi1;
-extern struct platform_device s5p6440_device_spi0;
-extern struct platform_device s5p6440_device_spi1;
-extern struct platform_device s5p6450_device_spi0;
-extern struct platform_device s5p6450_device_spi1;
+extern struct platform_device s5p64x0_device_spi0;
+extern struct platform_device s5p64x0_device_spi1;
 
 extern struct platform_device s3c_device_hwmon;