50 files changed, 399 insertions, 144 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 13b739469c51..1cacda426a0e 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1183,9 +1183,9 @@ config ARM_NR_BANKS
         default 8
 
 config IWMMXT
-        bool "Enable iWMMXt support"
+        bool "Enable iWMMXt support" if !CPU_PJ4
         depends on CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_PJ4
-        default y if PXA27x || PXA3xx || ARCH_MMP
+        default y if PXA27x || PXA3xx || ARCH_MMP || CPU_PJ4
         help
           Enable support for iWMMXt context switching at run time if
           running on a CPU that supports it.
@@ -1439,6 +1439,16 @@ config ARM_ERRATA_775420
          to deadlock. This workaround puts DSB before executing ISB if
          an abort may occur on cache maintenance.
 
+config ARM_ERRATA_798181
+        bool "ARM errata: TLBI/DSB failure on Cortex-A15"
+        depends on CPU_V7 && SMP
+        help
+          On Cortex-A15 (r0p0..r3p2) the TLBI*IS/DSB operations are not
+          adequately shooting down all use of the old entries. This
+          option enables the Linux kernel workaround for this erratum
+          which sends an IPI to the CPUs that are running the same ASID
+          as the one being invalidated.
+
 endmenu
 
 source "arch/arm/common/Kconfig"
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index ecfcdba2d17c..9b31f4311ea2 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -495,6 +495,7 @@ config DEBUG_IMX_UART_PORT
                                                 DEBUG_IMX53_UART || \
                                                 DEBUG_IMX6Q_UART
         default 1
+        depends on ARCH_MXC
         help
           Choose UART port on which kernel low-level debug messages
           should be output.
diff --git a/arch/arm/boot/dts/armada-370-mirabox.dts b/arch/arm/boot/dts/armada-370-mirabox.dts
index dd0c57dd9f30..3234875824dc 100644
--- a/arch/arm/boot/dts/armada-370-mirabox.dts
+++ b/arch/arm/boot/dts/armada-370-mirabox.dts
@@ -54,7 +54,7 @@
                 };
 
                 mvsdio@d00d4000 {
-                        pinctrl-0 = <&sdio_pins2>;
+                        pinctrl-0 = <&sdio_pins3>;
                         pinctrl-names = "default";
                         status = "okay";
                         /*
diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi
index 8188d138020e..a195debb67d3 100644
--- a/arch/arm/boot/dts/armada-370.dtsi
+++ b/arch/arm/boot/dts/armada-370.dtsi
@@ -59,6 +59,12 @@
                                              "mpp50", "mpp51", "mpp52";
                               marvell,function = "sd0";
                         };
+
+                        sdio_pins3: sdio-pins3 {
+                              marvell,pins = "mpp48", "mpp49", "mpp50",
+                                             "mpp51", "mpp52", "mpp53";
+                              marvell,function = "sd0";
+                        };
                 };
 
                 gpio0: gpio@d0018100 {
diff --git a/arch/arm/boot/dts/dbx5x0.dtsi b/arch/arm/boot/dts/dbx5x0.dtsi
index 9de93096601a..aaa63d0a8096 100644
--- a/arch/arm/boot/dts/dbx5x0.dtsi
+++ b/arch/arm/boot/dts/dbx5x0.dtsi
@@ -191,8 +191,8 @@
 
                 prcmu: prcmu@80157000 {
                         compatible = "stericsson,db8500-prcmu";
-                        reg = <0x80157000 0x1000>;
-                        reg-names = "prcmu";
+                        reg = <0x80157000 0x1000>, <0x801b0000 0x8000>, <0x801b8000 0x1000>;
+                        reg-names = "prcmu", "prcmu-tcpm", "prcmu-tcdm";
                         interrupts = <0 47 0x4>;
                         #address-cells = <1>;
                         #size-cells = <1>;
diff --git a/arch/arm/boot/dts/kirkwood-goflexnet.dts b/arch/arm/boot/dts/kirkwood-goflexnet.dts
index bd83b8fc7c83..c3573be7b92c 100644
--- a/arch/arm/boot/dts/kirkwood-goflexnet.dts
+++ b/arch/arm/boot/dts/kirkwood-goflexnet.dts
@@ -77,6 +77,7 @@
                 };
 
                 nand@3000000 {
+                        chip-delay = <40>;
                         status = "okay";
 
                         partition@0 {
diff --git a/arch/arm/boot/dts/orion5x.dtsi b/arch/arm/boot/dts/orion5x.dtsi
index 8aad00f81ed9..f7bec3b1ba32 100644
--- a/arch/arm/boot/dts/orion5x.dtsi
+++ b/arch/arm/boot/dts/orion5x.dtsi
@@ -13,6 +13,9 @@
         compatible = "marvell,orion5x";
         interrupt-parent = <&intc>;
 
+        aliases {
+                gpio0 = &gpio0;
+        };
         intc: interrupt-controller {
                 compatible = "marvell,orion-intc", "marvell,intc";
                 interrupt-controller;
@@ -32,7 +35,9 @@
                         #gpio-cells = <2>;
                         gpio-controller;
                         reg = <0x10100 0x40>;
-                        ngpio = <32>;
+                        ngpios = <32>;
+                        interrupt-controller;
+                        #interrupt-cells = <2>;
                         interrupts = <6>, <7>, <8>, <9>;
                 };
 
@@ -91,7 +96,7 @@
                         reg = <0x90000 0x10000>,
                               <0xf2200000 0x800>;
                         reg-names = "regs", "sram";
-                        interrupts = <22>;
+                        interrupts = <28>;
                         status = "okay";
                 };
         };
diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi
index 48d00a099ce3..3d3f64d2111a 100644
--- a/arch/arm/boot/dts/tegra20.dtsi
+++ b/arch/arm/boot/dts/tegra20.dtsi
@@ -385,7 +385,7 @@
 
         spi@7000d800 {
                 compatible = "nvidia,tegra20-slink";
-                reg = <0x7000d480 0x200>;
+                reg = <0x7000d800 0x200>;
                 interrupts = <0 83 0x04>;
                 nvidia,dma-request-selector = <&apbdma 17>;
                 #address-cells = <1>;
diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi
index 9d87a3ffe998..dbf46c272562 100644
--- a/arch/arm/boot/dts/tegra30.dtsi
+++ b/arch/arm/boot/dts/tegra30.dtsi
@@ -372,7 +372,7 @@
 
         spi@7000d800 {
                 compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink";
-                reg = <0x7000d480 0x200>;
+                reg = <0x7000d800 0x200>;
                 interrupts = <0 83 0x04>;
                 nvidia,dma-request-selector = <&apbdma 17>;
                 #address-cells = <1>;
diff --git a/arch/arm/include/asm/delay.h b/arch/arm/include/asm/delay.h
index 720799fd3a81..dff714d886d5 100644
--- a/arch/arm/include/asm/delay.h
+++ b/arch/arm/include/asm/delay.h
@@ -24,7 +24,7 @@ extern struct arm_delay_ops {
         void (*delay)(unsigned long);
         void (*const_udelay)(unsigned long);
         void (*udelay)(unsigned long);
-        bool const_clock;
+        unsigned long ticks_per_jiffy;
 } arm_delay_ops;
 
 #define __delay(n)              arm_delay_ops.delay(n)
diff --git a/arch/arm/include/asm/highmem.h b/arch/arm/include/asm/highmem.h
index 8c5e828f484d..91b99abe7a95 100644
--- a/arch/arm/include/asm/highmem.h
+++ b/arch/arm/include/asm/highmem.h
@@ -41,6 +41,13 @@ extern void kunmap_high(struct page *page);
 #endif
 #endif
 
+/*
+ * Needed to be able to broadcast the TLB invalidation for kmap.
+ */
+#ifdef CONFIG_ARM_ERRATA_798181
+#undef ARCH_NEEDS_KMAP_HIGH_GET
+#endif
+
 #ifdef ARCH_NEEDS_KMAP_HIGH_GET
 extern void *kmap_high_get(struct page *page);
 #else
diff --git a/arch/arm/include/asm/mmu_context.h b/arch/arm/include/asm/mmu_context.h
index 863a6611323c..a7b85e0d0cc1 100644
--- a/arch/arm/include/asm/mmu_context.h
+++ b/arch/arm/include/asm/mmu_context.h
@@ -27,6 +27,8 @@ void __check_vmalloc_seq(struct mm_struct *mm);
 void check_and_switch_context(struct mm_struct *mm, struct task_struct *tsk);
 #define init_new_context(tsk,mm)        ({ atomic64_set(&mm->context.id, 0); 0; })
 
+DECLARE_PER_CPU(atomic64_t, active_asids);
+
 #else   /* !CONFIG_CPU_HAS_ASID */
 
 #ifdef CONFIG_MMU
diff --git a/arch/arm/include/asm/tlbflush.h b/arch/arm/include/asm/tlbflush.h
index 4db8c8820f0d..9e9c041358ca 100644
--- a/arch/arm/include/asm/tlbflush.h
+++ b/arch/arm/include/asm/tlbflush.h
@@ -450,6 +450,21 @@ static inline void local_flush_bp_all(void)
                 isb();
 }
 
+#ifdef CONFIG_ARM_ERRATA_798181
+static inline void dummy_flush_tlb_a15_erratum(void)
+{
+        /*
+         * Dummy TLBIMVAIS. Using the unmapped address 0 and ASID 0.
+         */
+        asm("mcr p15, 0, %0, c8, c3, 1" : : "r" (0));
+        dsb();
+}
+#else
+static inline void dummy_flush_tlb_a15_erratum(void)
+{
+}
+#endif
+
 /*
  *      flush_pmd_entry
  *
diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S
index 3248cde504ed..fefd7f971437 100644
--- a/arch/arm/kernel/entry-common.S
+++ b/arch/arm/kernel/entry-common.S
@@ -276,7 +276,13 @@ ENDPROC(ftrace_graph_caller_old)
  */
 
 .macro mcount_enter
+/*
+ * This pad compensates for the push {lr} at the call site.  Note that we are
+ * unable to unwind through a function which does not otherwise save its lr.
+ */
+ UNWIND(.pad    #4)
         stmdb   sp!, {r0-r3, lr}
+ UNWIND(.save   {r0-r3, lr})
 .endm
 
 .macro mcount_get_lr reg
@@ -289,6 +295,7 @@ ENDPROC(ftrace_graph_caller_old)
 .endm
 
 ENTRY(__gnu_mcount_nc)
+UNWIND(.fnstart)
 #ifdef CONFIG_DYNAMIC_FTRACE
         mov     ip, lr
         ldmia   sp!, {lr}
@@ -296,17 +303,22 @@ ENTRY(__gnu_mcount_nc)
 #else
         __mcount
 #endif
+UNWIND(.fnend)
 ENDPROC(__gnu_mcount_nc)
 
 #ifdef CONFIG_DYNAMIC_FTRACE
 ENTRY(ftrace_caller)
+UNWIND(.fnstart)
         __ftrace_caller
+UNWIND(.fnend)
 ENDPROC(ftrace_caller)
 #endif
 
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
 ENTRY(ftrace_graph_caller)
+UNWIND(.fnstart)
         __ftrace_graph_caller
+UNWIND(.fnend)
 ENDPROC(ftrace_graph_caller)
 #endif
 
diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S
index e0eb9a1cae77..8bac553fe213 100644
--- a/arch/arm/kernel/head.S
+++ b/arch/arm/kernel/head.S
@@ -267,7 +267,7 @@ __create_page_tables:
         addne   r6, r6, #1 << SECTION_SHIFT
         strne   r6, [r3]
 
-#if defined(CONFIG_LPAE) && defined(CONFIG_CPU_ENDIAN_BE8)
+#if defined(CONFIG_ARM_LPAE) && defined(CONFIG_CPU_ENDIAN_BE8)
         sub     r4, r4, #4                      @ Fixup page table pointer
                                                 @ for 64-bit descriptors
 #endif
diff --git a/arch/arm/kernel/hw_breakpoint.c b/arch/arm/kernel/hw_breakpoint.c
index 96093b75ab90..5dc1aa6f0f7d 100644
--- a/arch/arm/kernel/hw_breakpoint.c
+++ b/arch/arm/kernel/hw_breakpoint.c
@@ -966,7 +966,7 @@ static void reset_ctrl_regs(void *unused)
         }
 
         if (err) {
-                pr_warning("CPU %d debug is powered down!\n", cpu);
+                pr_warn_once("CPU %d debug is powered down!\n", cpu);
                 cpumask_or(&debug_err_mask, &debug_err_mask, cpumask_of(cpu));
                 return;
         }
@@ -987,7 +987,7 @@ clear_vcr:
         isb();
 
         if (cpumask_intersects(&debug_err_mask, cpumask_of(cpu))) {
-                pr_warning("CPU %d failed to disable vector catch\n", cpu);
+                pr_warn_once("CPU %d failed to disable vector catch\n", cpu);
                 return;
         }
 
@@ -1007,7 +1007,7 @@ clear_vcr:
         }
 
         if (cpumask_intersects(&debug_err_mask, cpumask_of(cpu))) {
-                pr_warning("CPU %d failed to clear debug register pairs\n", cpu);
+                pr_warn_once("CPU %d failed to clear debug register pairs\n", cpu);
                 return;
         }
 
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index 3f6cbb2e3eda..d343a6c3a6d1 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -353,6 +353,23 @@ void __init early_print(const char *str, ...)
         printk("%s", buf);
 }
 
+static void __init cpuid_init_hwcaps(void)
+{
+        unsigned int divide_instrs;
+
+        if (cpu_architecture() < CPU_ARCH_ARMv7)
+                return;
+
+        divide_instrs = (read_cpuid_ext(CPUID_EXT_ISAR0) & 0x0f000000) >> 24;
+
+        switch (divide_instrs) {
+        case 2:
+                elf_hwcap |= HWCAP_IDIVA;
+        case 1:
+                elf_hwcap |= HWCAP_IDIVT;
+        }
+}
+
 static void __init feat_v6_fixup(void)
 {
         int id = read_cpuid_id();
@@ -483,8 +500,11 @@ static void __init setup_processor(void)
         snprintf(elf_platform, ELF_PLATFORM_SIZE, "%s%c",
                  list->elf_name, ENDIANNESS);
         elf_hwcap = list->elf_hwcap;
+
+        cpuid_init_hwcaps();
+
 #ifndef CONFIG_ARM_THUMB
-        elf_hwcap &= ~HWCAP_THUMB;
+        elf_hwcap &= ~(HWCAP_THUMB | HWCAP_IDIVT);
 #endif
 
         feat_v6_fixup();
@@ -524,7 +544,7 @@ int __init arm_add_memory(phys_addr_t start, phys_addr_t size)
         size -= start & ~PAGE_MASK;
         bank->start = PAGE_ALIGN(start);
 
-#ifndef CONFIG_LPAE
+#ifndef CONFIG_ARM_LPAE
         if (bank->start + size < bank->start) {
                 printk(KERN_CRIT "Truncating memory at 0x%08llx to fit in "
                         "32-bit physical address space\n", (long long)start);
diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index 79078edbb9bc..1f2ccccaf009 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -673,9 +673,6 @@ static int cpufreq_callback(struct notifier_block *nb,
         if (freq->flags & CPUFREQ_CONST_LOOPS)
                 return NOTIFY_OK;
 
-        if (arm_delay_ops.const_clock)
-                return NOTIFY_OK;
-
         if (!per_cpu(l_p_j_ref, cpu)) {
                 per_cpu(l_p_j_ref, cpu) =
                         per_cpu(cpu_data, cpu).loops_per_jiffy;
diff --git a/arch/arm/kernel/smp_tlb.c b/arch/arm/kernel/smp_tlb.c
index bd0300531399..e82e1d248772 100644
--- a/arch/arm/kernel/smp_tlb.c
+++ b/arch/arm/kernel/smp_tlb.c
@@ -12,6 +12,7 @@
 
 #include <asm/smp_plat.h>
 #include <asm/tlbflush.h>
+#include <asm/mmu_context.h>
 
 /**********************************************************************/
 
@@ -69,12 +70,72 @@ static inline void ipi_flush_bp_all(void *ignored)
         local_flush_bp_all();
 }
 
+#ifdef CONFIG_ARM_ERRATA_798181
+static int erratum_a15_798181(void)
+{
+        unsigned int midr = read_cpuid_id();
+
+        /* Cortex-A15 r0p0..r3p2 affected */
+        if ((midr & 0xff0ffff0) != 0x410fc0f0 || midr > 0x413fc0f2)
+                return 0;
+        return 1;
+}
+#else
+static int erratum_a15_798181(void)
+{
+        return 0;
+}
+#endif
+
+static void ipi_flush_tlb_a15_erratum(void *arg)
+{
+        dmb();
+}
+
+static void broadcast_tlb_a15_erratum(void)
+{
+        if (!erratum_a15_798181())
+                return;
+
+        dummy_flush_tlb_a15_erratum();
+        smp_call_function_many(cpu_online_mask, ipi_flush_tlb_a15_erratum,
+                               NULL, 1);
+}
+
+static void broadcast_tlb_mm_a15_erratum(struct mm_struct *mm)
+{
+        int cpu;
+        cpumask_t mask = { CPU_BITS_NONE };
+
+        if (!erratum_a15_798181())
+                return;
+
+        dummy_flush_tlb_a15_erratum();
+        for_each_online_cpu(cpu) {
+                if (cpu == smp_processor_id())
+                        continue;
+                /*
+                 * We only need to send an IPI if the other CPUs are running
+                 * the same ASID as the one being invalidated. There is no
+                 * need for locking around the active_asids check since the
+                 * switch_mm() function has at least one dmb() (as required by
+                 * this workaround) in case a context switch happens on
+                 * another CPU after the condition below.
+                 */
+                if (atomic64_read(&mm->context.id) ==
+                    atomic64_read(&per_cpu(active_asids, cpu)))
+                        cpumask_set_cpu(cpu, &mask);
+        }
+        smp_call_function_many(&mask, ipi_flush_tlb_a15_erratum, NULL, 1);
+}
+
 void flush_tlb_all(void)
 {
         if (tlb_ops_need_broadcast())
                 on_each_cpu(ipi_flush_tlb_all, NULL, 1);
         else
                 local_flush_tlb_all();
+        broadcast_tlb_a15_erratum();
 }
 
 void flush_tlb_mm(struct mm_struct *mm)
@@ -83,6 +144,7 @@ void flush_tlb_mm(struct mm_struct *mm)
                 on_each_cpu_mask(mm_cpumask(mm), ipi_flush_tlb_mm, mm, 1);
         else
                 local_flush_tlb_mm(mm);
+        broadcast_tlb_mm_a15_erratum(mm);
 }
 
 void flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr)
@@ -95,6 +157,7 @@ void flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr)
                                         &ta, 1);
         } else
                 local_flush_tlb_page(vma, uaddr);
+        broadcast_tlb_mm_a15_erratum(vma->vm_mm);
 }
 
 void flush_tlb_kernel_page(unsigned long kaddr)
@@ -105,6 +168,7 @@ void flush_tlb_kernel_page(unsigned long kaddr)
                 on_each_cpu(ipi_flush_tlb_kernel_page, &ta, 1);
         } else
                 local_flush_tlb_kernel_page(kaddr);
+        broadcast_tlb_a15_erratum();
 }
 
 void flush_tlb_range(struct vm_area_struct *vma,
@@ -119,6 +183,7 @@ void flush_tlb_range(struct vm_area_struct *vma,
                                         &ta, 1);
         } else
                 local_flush_tlb_range(vma, start, end);
+        broadcast_tlb_mm_a15_erratum(vma->vm_mm);
 }
 
 void flush_tlb_kernel_range(unsigned long start, unsigned long end)
@@ -130,6 +195,7 @@ void flush_tlb_kernel_range(unsigned long start, unsigned long end)
                 on_each_cpu(ipi_flush_tlb_kernel_range, &ta, 1);
         } else
                 local_flush_tlb_kernel_range(start, end);
+        broadcast_tlb_a15_erratum();
 }
 
 void flush_bp_all(void)
diff --git a/arch/arm/kvm/vgic.c b/arch/arm/kvm/vgic.c
index c9a17316e9fe..0e4cfe123b38 100644
--- a/arch/arm/kvm/vgic.c
+++ b/arch/arm/kvm/vgic.c
@@ -883,8 +883,7 @@ static bool vgic_queue_irq(struct kvm_vcpu *vcpu, u8 sgi_source_id, int irq)
                           lr, irq, vgic_cpu->vgic_lr[lr]);
                 BUG_ON(!test_bit(lr, vgic_cpu->lr_used));
                 vgic_cpu->vgic_lr[lr] |= GICH_LR_PENDING_BIT;
-
-                goto out;
+                return true;
         }
 
         /* Try to use another LR for this interrupt */
@@ -898,7 +897,6 @@ static bool vgic_queue_irq(struct kvm_vcpu *vcpu, u8 sgi_source_id, int irq)
         vgic_cpu->vgic_irq_lr_map[irq] = lr;
         set_bit(lr, vgic_cpu->lr_used);
 
-out:
         if (!vgic_irq_is_edge(vcpu, irq))
                 vgic_cpu->vgic_lr[lr] |= GICH_LR_EOI;
 
@@ -1018,21 +1016,6 @@ static bool vgic_process_maintenance(struct kvm_vcpu *vcpu)
 
         kvm_debug("MISR = %08x\n", vgic_cpu->vgic_misr);
 
-        /*
-         * We do not need to take the distributor lock here, since the only
-         * action we perform is clearing the irq_active_bit for an EOIed
-         * level interrupt.  There is a potential race with
-         * the queuing of an interrupt in __kvm_vgic_flush_hwstate(), where we
-         * check if the interrupt is already active. Two possibilities:
-         *
-         * - The queuing is occurring on the same vcpu: cannot happen,
-         *   as we're already in the context of this vcpu, and
-         *   executing the handler
-         * - The interrupt has been migrated to another vcpu, and we
-         *   ignore this interrupt for this run. Big deal. It is still
-         *   pending though, and will get considered when this vcpu
-         *   exits.
-         */
         if (vgic_cpu->vgic_misr & GICH_MISR_EOI) {
                 /*
                  * Some level interrupts have been EOIed. Clear their
@@ -1054,6 +1037,13 @@ static bool vgic_process_maintenance(struct kvm_vcpu *vcpu)
                         } else {
                                 vgic_cpu_irq_clear(vcpu, irq);
                         }
+
+                        /*
+                         * Despite being EOIed, the LR may not have
+                         * been marked as empty.
+                         */
+                        set_bit(lr, (unsigned long *)vgic_cpu->vgic_elrsr);
+                        vgic_cpu->vgic_lr[lr] &= ~GICH_LR_ACTIVE_BIT;
                 }
         }
 
@@ -1064,9 +1054,8 @@ static bool vgic_process_maintenance(struct kvm_vcpu *vcpu)
 }
 
 /*
- * Sync back the VGIC state after a guest run. We do not really touch
- * the distributor here (the irq_pending_on_cpu bit is safe to set),
- * so there is no need for taking its lock.
+ * Sync back the VGIC state after a guest run. The distributor lock is
+ * needed so we don't get preempted in the middle of the state processing.
  */
 static void __kvm_vgic_sync_hwstate(struct kvm_vcpu *vcpu)
 {
@@ -1112,10 +1101,14 @@ void kvm_vgic_flush_hwstate(struct kvm_vcpu *vcpu)
 
 void kvm_vgic_sync_hwstate(struct kvm_vcpu *vcpu)
 {
+        struct vgic_dist *dist = &vcpu->kvm->arch.vgic;
+
         if (!irqchip_in_kernel(vcpu->kvm))
                 return;
 
+        spin_lock(&dist->lock);
         __kvm_vgic_sync_hwstate(vcpu);
+        spin_unlock(&dist->lock);
 }
 
 int kvm_vgic_vcpu_pending_irq(struct kvm_vcpu *vcpu)
diff --git a/arch/arm/lib/delay.c b/arch/arm/lib/delay.c
index 6b93f6a1a3c7..64dbfa57204a 100644
--- a/arch/arm/lib/delay.c
+++ b/arch/arm/lib/delay.c
@@ -58,7 +58,7 @@ static void __timer_delay(unsigned long cycles)
 static void __timer_const_udelay(unsigned long xloops)
 {
         unsigned long long loops = xloops;
-        loops *= loops_per_jiffy;
+        loops *= arm_delay_ops.ticks_per_jiffy;
         __timer_delay(loops >> UDELAY_SHIFT);
 }
 
@@ -73,11 +73,13 @@ void __init register_current_timer_delay(const struct delay_timer *timer)
                 pr_info("Switching to timer-based delay loop\n");
                 delay_timer                     = timer;
                 lpj_fine                        = timer->freq / HZ;
-                loops_per_jiffy                 = lpj_fine;
+
+                /* cpufreq may scale loops_per_jiffy, so keep a private copy */
+                arm_delay_ops.ticks_per_jiffy   = lpj_fine;
                 arm_delay_ops.delay             = __timer_delay;
                 arm_delay_ops.const_udelay      = __timer_const_udelay;
                 arm_delay_ops.udelay            = __timer_udelay;
-                arm_delay_ops.const_clock       = true;
+
                 delay_calibrated                = true;
         } else {
                 pr_info("Ignoring duplicate/late registration of read_current_timer delay\n");
diff --git a/arch/arm/mach-cns3xxx/core.c b/arch/arm/mach-cns3xxx/core.c
index e698f26cc0cb..52e4bb5cf12d 100644
--- a/arch/arm/mach-cns3xxx/core.c
+++ b/arch/arm/mach-cns3xxx/core.c
@@ -22,19 +22,9 @@
 
 static struct map_desc cns3xxx_io_desc[] __initdata = {
         {
-                .virtual        = CNS3XXX_TC11MP_TWD_BASE_VIRT,
-                .pfn            = __phys_to_pfn(CNS3XXX_TC11MP_TWD_BASE),
-                .length         = SZ_4K,
-                .type           = MT_DEVICE,
-        }, {
-                .virtual        = CNS3XXX_TC11MP_GIC_CPU_BASE_VIRT,
-                .pfn            = __phys_to_pfn(CNS3XXX_TC11MP_GIC_CPU_BASE),
-                .length         = SZ_4K,
-                .type           = MT_DEVICE,
-        }, {
-                .virtual        = CNS3XXX_TC11MP_GIC_DIST_BASE_VIRT,
-                .pfn            = __phys_to_pfn(CNS3XXX_TC11MP_GIC_DIST_BASE),
-                .length         = SZ_4K,
+                .virtual        = CNS3XXX_TC11MP_SCU_BASE_VIRT,
+                .pfn            = __phys_to_pfn(CNS3XXX_TC11MP_SCU_BASE),
+                .length         = SZ_8K,
                 .type           = MT_DEVICE,
         }, {
                 .virtual        = CNS3XXX_TIMER1_2_3_BASE_VIRT,
diff --git a/arch/arm/mach-cns3xxx/include/mach/cns3xxx.h b/arch/arm/mach-cns3xxx/include/mach/cns3xxx.h
index 191c8e57f289..b1021aafa481 100644
--- a/arch/arm/mach-cns3xxx/include/mach/cns3xxx.h
+++ b/arch/arm/mach-cns3xxx/include/mach/cns3xxx.h
@@ -94,10 +94,10 @@
 #define RTC_INTR_STS_OFFSET                     0x34
 
 #define CNS3XXX_MISC_BASE                       0x76000000      /* Misc Control */
-#define CNS3XXX_MISC_BASE_VIRT                  0xFFF07000      /* Misc Control */
+#define CNS3XXX_MISC_BASE_VIRT                  0xFB000000      /* Misc Control */
 
 #define CNS3XXX_PM_BASE                         0x77000000      /* Power Management Control */
-#define CNS3XXX_PM_BASE_VIRT                    0xFFF08000
+#define CNS3XXX_PM_BASE_VIRT                    0xFB001000
 
 #define PM_CLK_GATE_OFFSET                      0x00
 #define PM_SOFT_RST_OFFSET                      0x04
@@ -109,7 +109,7 @@
 #define PM_PLL_HM_PD_OFFSET                     0x1C
 
 #define CNS3XXX_UART0_BASE                      0x78000000      /* UART 0 */
-#define CNS3XXX_UART0_BASE_VIRT                 0xFFF09000
+#define CNS3XXX_UART0_BASE_VIRT                 0xFB002000
 
 #define CNS3XXX_UART1_BASE                      0x78400000      /* UART 1 */
 #define CNS3XXX_UART1_BASE_VIRT                 0xFFF0A000
@@ -130,7 +130,7 @@
 #define CNS3XXX_I2S_BASE_VIRT                   0xFFF10000
 
 #define CNS3XXX_TIMER1_2_3_BASE                 0x7C800000      /* Timer */
-#define CNS3XXX_TIMER1_2_3_BASE_VIRT            0xFFF10800
+#define CNS3XXX_TIMER1_2_3_BASE_VIRT            0xFB003000
 
 #define TIMER1_COUNTER_OFFSET                   0x00
 #define TIMER1_AUTO_RELOAD_OFFSET               0x04
@@ -227,16 +227,16 @@
  * Testchip peripheral and fpga gic regions
  */
 #define CNS3XXX_TC11MP_SCU_BASE                 0x90000000      /* IRQ, Test chip */
-#define CNS3XXX_TC11MP_SCU_BASE_VIRT            0xFF000000
+#define CNS3XXX_TC11MP_SCU_BASE_VIRT            0xFB004000
 
 #define CNS3XXX_TC11MP_GIC_CPU_BASE             0x90000100      /* Test chip interrupt controller CPU interface */
-#define CNS3XXX_TC11MP_GIC_CPU_BASE_VIRT        0xFF000100
+#define CNS3XXX_TC11MP_GIC_CPU_BASE_VIRT        (CNS3XXX_TC11MP_SCU_BASE_VIRT + 0x100)
 
 #define CNS3XXX_TC11MP_TWD_BASE                 0x90000600
-#define CNS3XXX_TC11MP_TWD_BASE_VIRT            0xFF000600
+#define CNS3XXX_TC11MP_TWD_BASE_VIRT            (CNS3XXX_TC11MP_SCU_BASE_VIRT + 0x600)
 
 #define CNS3XXX_TC11MP_GIC_DIST_BASE            0x90001000      /* Test chip interrupt controller distributor */
-#define CNS3XXX_TC11MP_GIC_DIST_BASE_VIRT       0xFF001000
+#define CNS3XXX_TC11MP_GIC_DIST_BASE_VIRT       (CNS3XXX_TC11MP_SCU_BASE_VIRT + 0x1000)
 
 #define CNS3XXX_TC11MP_L220_BASE                0x92002000      /* L220 registers */
 #define CNS3XXX_TC11MP_L220_BASE_VIRT           0xFF002000
diff --git a/arch/arm/mach-ep93xx/include/mach/uncompress.h b/arch/arm/mach-ep93xx/include/mach/uncompress.h
index d2afb4dd82ab..b5cc77d2380b 100644
--- a/arch/arm/mach-ep93xx/include/mach/uncompress.h
+++ b/arch/arm/mach-ep93xx/include/mach/uncompress.h
@@ -47,9 +47,13 @@ static void __raw_writel(unsigned int value, unsigned int ptr)
 
 static inline void putc(int c)
 {
-        /* Transmit fifo not full?  */
-        while (__raw_readb(PHYS_UART_FLAG) & UART_FLAG_TXFF)
-                ;
+        int i;
+
+        for (i = 0; i < 10000; i++) {
+                /* Transmit fifo not full? */
+                if (!(__raw_readb(PHYS_UART_FLAG) & UART_FLAG_TXFF))
+                        break;
+        }
 
         __raw_writeb(c, PHYS_UART_DATA);
 }
diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h
index 5a800bfcec5b..5bf4a97ab241 100644
--- a/arch/arm/mach-imx/common.h
+++ b/arch/arm/mach-imx/common.h
@@ -110,6 +110,8 @@ void tzic_handle_irq(struct pt_regs *);
 
 extern void imx_enable_cpu(int cpu, bool enable);
 extern void imx_set_cpu_jump(int cpu, void *jump_addr);
+extern u32 imx_get_cpu_arg(int cpu);
+extern void imx_set_cpu_arg(int cpu, u32 arg);
 extern void v7_cpu_resume(void);
 extern u32 *pl310_get_save_ptr(void);
 #ifdef CONFIG_SMP
diff --git a/arch/arm/mach-imx/hotplug.c b/arch/arm/mach-imx/hotplug.c
index 7bc5fe15dda2..361a253e2b63 100644
--- a/arch/arm/mach-imx/hotplug.c
+++ b/arch/arm/mach-imx/hotplug.c
@@ -46,11 +46,23 @@ static inline void cpu_enter_lowpower(void)
 void imx_cpu_die(unsigned int cpu)
 {
         cpu_enter_lowpower();
+        /*
+         * We use the cpu jumping argument register to sync with
+         * imx_cpu_kill() which is running on cpu0 and waiting for
+         * the register being cleared to kill the cpu.
+         */
+        imx_set_cpu_arg(cpu, ~0);
         cpu_do_idle();
 }
 
 int imx_cpu_kill(unsigned int cpu)
 {
+        unsigned long timeout = jiffies + msecs_to_jiffies(50);
+
+        while (imx_get_cpu_arg(cpu) == 0)
+                if (time_after(jiffies, timeout))
+                        return 0;
         imx_enable_cpu(cpu, false);
+        imx_set_cpu_arg(cpu, 0);
         return 1;
 }
diff --git a/arch/arm/mach-imx/src.c b/arch/arm/mach-imx/src.c
index e15f1555c59b..09a742f8c7ab 100644
--- a/arch/arm/mach-imx/src.c
+++ b/arch/arm/mach-imx/src.c
@@ -43,6 +43,18 @@ void imx_set_cpu_jump(int cpu, void *jump_addr)
                        src_base + SRC_GPR1 + cpu * 8);
 }
 
+u32 imx_get_cpu_arg(int cpu)
+{
+        cpu = cpu_logical_map(cpu);
+        return readl_relaxed(src_base + SRC_GPR1 + cpu * 8 + 4);
+}
+
+void imx_set_cpu_arg(int cpu, u32 arg)
+{
+        cpu = cpu_logical_map(cpu);
+        writel_relaxed(arg, src_base + SRC_GPR1 + cpu * 8 + 4);
+}
+
 void imx_src_prepare_restart(void)
 {
         u32 val;
diff --git a/arch/arm/mach-kirkwood/guruplug-setup.c b/arch/arm/mach-kirkwood/guruplug-setup.c
index 1c6e736cbbf8..08dd739aa709 100644
--- a/arch/arm/mach-kirkwood/guruplug-setup.c
+++ b/arch/arm/mach-kirkwood/guruplug-setup.c
@@ -53,6 +53,8 @@ static struct mv_sata_platform_data guruplug_sata_data = {
 
 static struct mvsdio_platform_data guruplug_mvsdio_data = {
         /* unfortunately the CD signal has not been connected */
+        .gpio_card_detect = -1,
+        .gpio_write_protect = -1,
 };
 
 static struct gpio_led guruplug_led_pins[] = {
diff --git a/arch/arm/mach-kirkwood/openrd-setup.c b/arch/arm/mach-kirkwood/openrd-setup.c
index 8ddd69fdc937..6a6eb548307d 100644
--- a/arch/arm/mach-kirkwood/openrd-setup.c
+++ b/arch/arm/mach-kirkwood/openrd-setup.c
@@ -55,6 +55,7 @@ static struct mv_sata_platform_data openrd_sata_data = {
 
 static struct mvsdio_platform_data openrd_mvsdio_data = {
         .gpio_card_detect = 29, /* MPP29 used as SD card detect */
+        .gpio_write_protect = -1,
 };
 
 static unsigned int openrd_mpp_config[] __initdata = {
diff --git a/arch/arm/mach-kirkwood/rd88f6281-setup.c b/arch/arm/mach-kirkwood/rd88f6281-setup.c
index c7d93b48926b..d24223166e06 100644
--- a/arch/arm/mach-kirkwood/rd88f6281-setup.c
+++ b/arch/arm/mach-kirkwood/rd88f6281-setup.c
@@ -69,6 +69,7 @@ static struct mv_sata_platform_data rd88f6281_sata_data = {
 
 static struct mvsdio_platform_data rd88f6281_mvsdio_data = {
         .gpio_card_detect = 28,
+        .gpio_write_protect = -1,
 };
 
 static unsigned int rd88f6281_mpp_config[] __initdata = {
diff --git a/arch/arm/mach-msm/timer.c b/arch/arm/mach-msm/timer.c
index 2969027f02fa..f9fd77e8f1f5 100644
--- a/arch/arm/mach-msm/timer.c
+++ b/arch/arm/mach-msm/timer.c
@@ -62,7 +62,10 @@ static int msm_timer_set_next_event(unsigned long cycles,
 {
         u32 ctrl = readl_relaxed(event_base + TIMER_ENABLE);
 
-        writel_relaxed(0, event_base + TIMER_CLEAR);
+        ctrl &= ~TIMER_ENABLE_EN;
+        writel_relaxed(ctrl, event_base + TIMER_ENABLE);
+
+        writel_relaxed(ctrl, event_base + TIMER_CLEAR);
         writel_relaxed(cycles, event_base + TIMER_MATCH_VAL);
         writel_relaxed(ctrl | TIMER_ENABLE_EN, event_base + TIMER_ENABLE);
         return 0;
diff --git a/arch/arm/mach-mvebu/irq-armada-370-xp.c b/arch/arm/mach-mvebu/irq-armada-370-xp.c
index 274ff58271de..6a9195e10579 100644
--- a/arch/arm/mach-mvebu/irq-armada-370-xp.c
+++ b/arch/arm/mach-mvebu/irq-armada-370-xp.c
@@ -44,6 +44,8 @@
 
 #define ARMADA_370_XP_MAX_PER_CPU_IRQS          (28)
 
+#define ARMADA_370_XP_TIMER0_PER_CPU_IRQ        (5)
+
 #define ACTIVE_DOORBELLS                        (8)
 
 static DEFINE_RAW_SPINLOCK(irq_controller_lock);
@@ -62,7 +64,7 @@ static void armada_370_xp_irq_mask(struct irq_data *d)
 #ifdef CONFIG_SMP
         irq_hw_number_t hwirq = irqd_to_hwirq(d);
 
-        if (hwirq > ARMADA_370_XP_MAX_PER_CPU_IRQS)
+        if (hwirq != ARMADA_370_XP_TIMER0_PER_CPU_IRQ)
                 writel(hwirq, main_int_base +
                                 ARMADA_370_XP_INT_CLEAR_ENABLE_OFFS);
         else
@@ -79,7 +81,7 @@ static void armada_370_xp_irq_unmask(struct irq_data *d)
 #ifdef CONFIG_SMP
         irq_hw_number_t hwirq = irqd_to_hwirq(d);
 
-        if (hwirq > ARMADA_370_XP_MAX_PER_CPU_IRQS)
+        if (hwirq != ARMADA_370_XP_TIMER0_PER_CPU_IRQ)
                 writel(hwirq, main_int_base +
                                 ARMADA_370_XP_INT_SET_ENABLE_OFFS);
         else
@@ -147,7 +149,7 @@ static int armada_370_xp_mpic_irq_map(struct irq_domain *h,
         writel(hw, main_int_base + ARMADA_370_XP_INT_SET_ENABLE_OFFS);
         irq_set_status_flags(virq, IRQ_LEVEL);
 
-        if (hw < ARMADA_370_XP_MAX_PER_CPU_IRQS) {
+        if (hw == ARMADA_370_XP_TIMER0_PER_CPU_IRQ) {
                 irq_set_percpu_devid(virq);
                 irq_set_chip_and_handler(virq, &armada_370_xp_irq_chip,
                                         handle_percpu_devid_irq);
diff --git a/arch/arm/mach-mxs/mach-mxs.c b/arch/arm/mach-mxs/mach-mxs.c
index 3218f1f2c0e0..e7b781d3788f 100644
--- a/arch/arm/mach-mxs/mach-mxs.c
+++ b/arch/arm/mach-mxs/mach-mxs.c
@@ -41,8 +41,6 @@ static struct fb_videomode mx23evk_video_modes[] = {
                 .lower_margin   = 4,
                 .hsync_len      = 1,
                 .vsync_len      = 1,
-                .sync           = FB_SYNC_DATA_ENABLE_HIGH_ACT |
-                                  FB_SYNC_DOTCLK_FAILING_ACT,
         },
 };
 
@@ -59,8 +57,6 @@ static struct fb_videomode mx28evk_video_modes[] = {
                 .lower_margin   = 10,
                 .hsync_len      = 10,
                 .vsync_len      = 10,
-                .sync           = FB_SYNC_DATA_ENABLE_HIGH_ACT |
-                                  FB_SYNC_DOTCLK_FAILING_ACT,
         },
 };
 
@@ -77,7 +73,6 @@ static struct fb_videomode m28evk_video_modes[] = {
                 .lower_margin   = 45,
                 .hsync_len      = 1,
                 .vsync_len      = 1,
-                .sync           = FB_SYNC_DATA_ENABLE_HIGH_ACT,
         },
 };
 
@@ -94,9 +89,7 @@ static struct fb_videomode apx4devkit_video_modes[] = {
                 .lower_margin   = 13,
                 .hsync_len      = 48,
                 .vsync_len      = 3,
-                .sync           = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT |
-                                  FB_SYNC_DATA_ENABLE_HIGH_ACT |
-                                  FB_SYNC_DOTCLK_FAILING_ACT,
+                .sync           = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
         },
 };
 
@@ -113,9 +106,7 @@ static struct fb_videomode apf28dev_video_modes[] = {
                 .lower_margin = 0x15,
                 .hsync_len = 64,
                 .vsync_len = 4,
-                .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT |
-                                FB_SYNC_DATA_ENABLE_HIGH_ACT |
-                                FB_SYNC_DOTCLK_FAILING_ACT,
+                .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
         },
 };
 
@@ -132,7 +123,6 @@ static struct fb_videomode cfa10049_video_modes[] = {
                 .lower_margin   = 2,
                 .hsync_len      = 15,
                 .vsync_len      = 15,
-                .sync           = FB_SYNC_DATA_ENABLE_HIGH_ACT
         },
 };
 
@@ -259,6 +249,8 @@ static void __init imx23_evk_init(void)
         mxsfb_pdata.mode_count = ARRAY_SIZE(mx23evk_video_modes);
         mxsfb_pdata.default_bpp = 32;
         mxsfb_pdata.ld_intf_width = STMLCDIF_24BIT;
+        mxsfb_pdata.sync = MXSFB_SYNC_DATA_ENABLE_HIGH_ACT |
+                                MXSFB_SYNC_DOTCLK_FAILING_ACT;
 }
 
 static inline void enable_clk_enet_out(void)
@@ -278,6 +270,8 @@ static void __init imx28_evk_init(void)
         mxsfb_pdata.mode_count = ARRAY_SIZE(mx28evk_video_modes);
         mxsfb_pdata.default_bpp = 32;
         mxsfb_pdata.ld_intf_width = STMLCDIF_24BIT;
+        mxsfb_pdata.sync = MXSFB_SYNC_DATA_ENABLE_HIGH_ACT |
+                                MXSFB_SYNC_DOTCLK_FAILING_ACT;
 
         mxs_saif_clkmux_select(MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR0);
 }
@@ -297,6 +291,7 @@ static void __init m28evk_init(void)
         mxsfb_pdata.mode_count = ARRAY_SIZE(m28evk_video_modes);
         mxsfb_pdata.default_bpp = 16;
         mxsfb_pdata.ld_intf_width = STMLCDIF_18BIT;
+        mxsfb_pdata.sync = MXSFB_SYNC_DATA_ENABLE_HIGH_ACT;
 }
 
 static void __init sc_sps1_init(void)
@@ -322,6 +317,8 @@ static void __init apx4devkit_init(void)
         mxsfb_pdata.mode_count = ARRAY_SIZE(apx4devkit_video_modes);
         mxsfb_pdata.default_bpp = 32;
         mxsfb_pdata.ld_intf_width = STMLCDIF_24BIT;
+        mxsfb_pdata.sync = MXSFB_SYNC_DATA_ENABLE_HIGH_ACT |
+                                MXSFB_SYNC_DOTCLK_FAILING_ACT;
 }
 
 #define ENET0_MDC__GPIO_4_0     MXS_GPIO_NR(4, 0)
@@ -407,6 +404,7 @@ static void __init cfa10049_init(void)
         mxsfb_pdata.mode_count = ARRAY_SIZE(cfa10049_video_modes);
         mxsfb_pdata.default_bpp = 32;
         mxsfb_pdata.ld_intf_width = STMLCDIF_18BIT;
+        mxsfb_pdata.sync = MXSFB_SYNC_DATA_ENABLE_HIGH_ACT;
 }
 
 static void __init cfa10037_init(void)
@@ -423,6 +421,8 @@ static void __init apf28_init(void)
         mxsfb_pdata.mode_count = ARRAY_SIZE(apf28dev_video_modes);
         mxsfb_pdata.default_bpp = 16;
         mxsfb_pdata.ld_intf_width = STMLCDIF_16BIT;
+        mxsfb_pdata.sync = MXSFB_SYNC_DATA_ENABLE_HIGH_ACT |
+                                MXSFB_SYNC_DOTCLK_FAILING_ACT;
 }
 
 static void __init mxs_machine_init(void)
diff --git a/arch/arm/mach-omap1/clock_data.c b/arch/arm/mach-omap1/clock_data.c
index cb7c6ae2e3fc..6c4f766365a2 100644
--- a/arch/arm/mach-omap1/clock_data.c
+++ b/arch/arm/mach-omap1/clock_data.c
@@ -543,15 +543,6 @@ static struct clk usb_dc_ck = {
         /* Direct from ULPD, no parent */
         .rate           = 48000000,
         .enable_reg     = OMAP1_IO_ADDRESS(SOFT_REQ_REG),
-        .enable_bit     = USB_REQ_EN_SHIFT,
-};
-
-static struct clk usb_dc_ck7xx = {
-        .name           = "usb_dc_ck",
-        .ops            = &clkops_generic,
-        /* Direct from ULPD, no parent */
-        .rate           = 48000000,
-        .enable_reg     = OMAP1_IO_ADDRESS(SOFT_REQ_REG),
         .enable_bit     = SOFT_USB_OTG_DPLL_REQ_SHIFT,
 };
 
@@ -727,8 +718,7 @@ static struct omap_clk omap_clks[] = {
         CLK(NULL,       "usb_clko",     &usb_clko,      CK_16XX | CK_1510 | CK_310),
         CLK(NULL,       "usb_hhc_ck",   &usb_hhc_ck1510, CK_1510 | CK_310),
         CLK(NULL,       "usb_hhc_ck",   &usb_hhc_ck16xx, CK_16XX),
-        CLK(NULL,       "usb_dc_ck",    &usb_dc_ck,     CK_16XX),
-        CLK(NULL,       "usb_dc_ck",    &usb_dc_ck7xx,  CK_7XX),
+        CLK(NULL,       "usb_dc_ck",    &usb_dc_ck,     CK_16XX | CK_7XX),
         CLK(NULL,       "mclk",         &mclk_1510,     CK_1510 | CK_310),
         CLK(NULL,       "mclk",         &mclk_16xx,     CK_16XX),
         CLK(NULL,       "bclk",         &bclk_1510,     CK_1510 | CK_310),
diff --git a/arch/arm/mach-omap2/cclock44xx_data.c b/arch/arm/mach-omap2/cclock44xx_data.c
index 3d58f335f173..0c6834ae1fc4 100644
--- a/arch/arm/mach-omap2/cclock44xx_data.c
+++ b/arch/arm/mach-omap2/cclock44xx_data.c
@@ -52,6 +52,13 @@
  */
 #define OMAP4_DPLL_ABE_DEFFREQ                          98304000
 
+/*
+ * OMAP4 USB DPLL default frequency. In OMAP4430 TRM version V, section
+ * "3.6.3.9.5 DPLL_USB Preferred Settings" shows that the preferred
+ * locked frequency for the USB DPLL is 960MHz.
+ */
+#define OMAP4_DPLL_USB_DEFFREQ                          960000000
+
 /* Root clocks */
 
 DEFINE_CLK_FIXED_RATE(extalt_clkin_ck, CLK_IS_ROOT, 59000000, 0x0);
@@ -1011,6 +1018,10 @@ DEFINE_CLK_OMAP_MUX(hsmmc2_fclk, "l3_init_clkdm", hsmmc1_fclk_sel,
                     OMAP4430_CM_L3INIT_MMC2_CLKCTRL, OMAP4430_CLKSEL_MASK,
                     hsmmc1_fclk_parents, func_dmic_abe_gfclk_ops);
 
+DEFINE_CLK_GATE(ocp2scp_usb_phy_phy_48m, "func_48m_fclk", &func_48m_fclk, 0x0,
+                OMAP4430_CM_L3INIT_USBPHYOCP2SCP_CLKCTRL,
+                OMAP4430_OPTFCLKEN_PHY_48M_SHIFT, 0x0, NULL);
+
 DEFINE_CLK_GATE(sha2md5_fck, "l3_div_ck", &l3_div_ck, 0x0,
                 OMAP4430_CM_L4SEC_SHA2MD51_CLKCTRL,
                 OMAP4430_MODULEMODE_SWCTRL_SHIFT, 0x0, NULL);
@@ -1538,6 +1549,7 @@ static struct omap_clk omap44xx_clks[] = {
         CLK(NULL,       "per_mcbsp4_gfclk",                     &per_mcbsp4_gfclk,      CK_443X),
         CLK(NULL,       "hsmmc1_fclk",                  &hsmmc1_fclk,   CK_443X),
         CLK(NULL,       "hsmmc2_fclk",                  &hsmmc2_fclk,   CK_443X),
+        CLK(NULL,       "ocp2scp_usb_phy_phy_48m",      &ocp2scp_usb_phy_phy_48m,       CK_443X),
         CLK(NULL,       "sha2md5_fck",                  &sha2md5_fck,   CK_443X),
         CLK(NULL,       "slimbus1_fclk_1",              &slimbus1_fclk_1,       CK_443X),
         CLK(NULL,       "slimbus1_fclk_0",              &slimbus1_fclk_0,       CK_443X),
@@ -1705,5 +1717,13 @@ int __init omap4xxx_clk_init(void)
         if (rc)
                 pr_err("%s: failed to configure ABE DPLL!\n", __func__);
 
+        /*
+         * Lock USB DPLL on OMAP4 devices so that the L3INIT power
+         * domain can transition to retention state when not in use.
+         */
+        rc = clk_set_rate(&dpll_usb_ck, OMAP4_DPLL_USB_DEFFREQ);
+        if (rc)
+                pr_err("%s: failed to configure USB DPLL!\n", __func__);
+
         return 0;
 }
diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h
index 40f4a03d728f..d6ba13e1c540 100644
--- a/arch/arm/mach-omap2/common.h
+++ b/arch/arm/mach-omap2/common.h
@@ -293,5 +293,8 @@ extern void omap_reserve(void);
 struct omap_hwmod;
 extern int omap_dss_reset(struct omap_hwmod *);
 
+/* SoC specific clock initializer */
+extern int (*omap_clk_init)(void);
+
 #endif /* __ASSEMBLER__ */
 #endif /* __ARCH_ARM_MACH_OMAP2PLUS_COMMON_H */
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 2c3fdd65387b..5c445ca1e271 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -55,6 +55,12 @@
 #include "prm44xx.h"
 
 /*
+ * omap_clk_init: points to a function that does the SoC-specific
+ * clock initializations
+ */
+int (*omap_clk_init)(void);
+
+/*
  * The machine specific code may provide the extra mapping besides the
  * default mapping provided here.
  */
@@ -397,7 +403,7 @@ void __init omap2420_init_early(void)
         omap242x_clockdomains_init();
         omap2420_hwmod_init();
         omap_hwmod_init_postsetup();
-        omap2420_clk_init();
+        omap_clk_init = omap2420_clk_init;
 }
 
 void __init omap2420_init_late(void)
@@ -427,7 +433,7 @@ void __init omap2430_init_early(void)
         omap243x_clockdomains_init();
         omap2430_hwmod_init();
         omap_hwmod_init_postsetup();
-        omap2430_clk_init();
+        omap_clk_init = omap2430_clk_init;
 }
 
 void __init omap2430_init_late(void)
@@ -462,7 +468,7 @@ void __init omap3_init_early(void)
         omap3xxx_clockdomains_init();
         omap3xxx_hwmod_init();
         omap_hwmod_init_postsetup();
-        omap3xxx_clk_init();
+        omap_clk_init = omap3xxx_clk_init;
 }
 
 void __init omap3430_init_early(void)
@@ -500,7 +506,7 @@ void __init ti81xx_init_early(void)
         omap3xxx_clockdomains_init();
         omap3xxx_hwmod_init();
         omap_hwmod_init_postsetup();
-        omap3xxx_clk_init();
+        omap_clk_init = omap3xxx_clk_init;
 }
 
 void __init omap3_init_late(void)
@@ -568,7 +574,7 @@ void __init am33xx_init_early(void)
         am33xx_clockdomains_init();
         am33xx_hwmod_init();
         omap_hwmod_init_postsetup();
-        am33xx_clk_init();
+        omap_clk_init = am33xx_clk_init;
 }
 #endif
 
@@ -593,7 +599,7 @@ void __init omap4430_init_early(void)
         omap44xx_clockdomains_init();
         omap44xx_hwmod_init();
         omap_hwmod_init_postsetup();
-        omap4xxx_clk_init();
+        omap_clk_init = omap4xxx_clk_init;
 }
 
 void __init omap4430_init_late(void)
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index c2c798c08c2b..a202a4785104 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -1368,7 +1368,9 @@ static void _enable_sysc(struct omap_hwmod *oh)
         }
 
         if (sf & SYSC_HAS_MIDLEMODE) {
-                if (oh->flags & HWMOD_SWSUP_MSTANDBY) {
+                if (oh->flags & HWMOD_FORCE_MSTANDBY) {
+                        idlemode = HWMOD_IDLEMODE_FORCE;
+                } else if (oh->flags & HWMOD_SWSUP_MSTANDBY) {
                         idlemode = HWMOD_IDLEMODE_NO;
                 } else {
                         if (sf & SYSC_HAS_ENAWAKEUP)
@@ -1440,7 +1442,8 @@ static void _idle_sysc(struct omap_hwmod *oh)
         }
 
         if (sf & SYSC_HAS_MIDLEMODE) {
-                if (oh->flags & HWMOD_SWSUP_MSTANDBY) {
+                if ((oh->flags & HWMOD_SWSUP_MSTANDBY) ||
+                    (oh->flags & HWMOD_FORCE_MSTANDBY)) {
                         idlemode = HWMOD_IDLEMODE_FORCE;
                 } else {
                         if (sf & SYSC_HAS_ENAWAKEUP)
diff --git a/arch/arm/mach-omap2/omap_hwmod.h b/arch/arm/mach-omap2/omap_hwmod.h
index d43d9b608eda..d5dc935f6060 100644
--- a/arch/arm/mach-omap2/omap_hwmod.h
+++ b/arch/arm/mach-omap2/omap_hwmod.h
@@ -427,8 +427,8 @@ struct omap_hwmod_omap4_prcm {
  *
  * HWMOD_SWSUP_SIDLE: omap_hwmod code should manually bring module in and out
  *     of idle, rather than relying on module smart-idle
- * HWMOD_SWSUP_MSTDBY: omap_hwmod code should manually bring module in and out
- *     of standby, rather than relying on module smart-standby
+ * HWMOD_SWSUP_MSTANDBY: omap_hwmod code should manually bring module in and
+ *     out of standby, rather than relying on module smart-standby
  * HWMOD_INIT_NO_RESET: don't reset this module at boot - important for
  *     SDRAM controller, etc. XXX probably belongs outside the main hwmod file
  *     XXX Should be HWMOD_SETUP_NO_RESET
@@ -459,6 +459,10 @@ struct omap_hwmod_omap4_prcm {
  *     correctly, or this is being abused to deal with some PM latency
  *     issues -- but we're currently suffering from a shortage of
  *     folks who are able to track these issues down properly.
+ * HWMOD_FORCE_MSTANDBY: Always keep MIDLEMODE bits cleared so that device
+ *     is kept in force-standby mode. Failing to do so causes PM problems
+ *     with musb on OMAP3630 at least. Note that musb has a dedicated register
+ *     to control MSTANDBY signal when MIDLEMODE is set to force-standby.
  */
 #define HWMOD_SWSUP_SIDLE                       (1 << 0)
 #define HWMOD_SWSUP_MSTANDBY                    (1 << 1)
@@ -471,6 +475,7 @@ struct omap_hwmod_omap4_prcm {
 #define HWMOD_16BIT_REG                         (1 << 8)
 #define HWMOD_EXT_OPT_MAIN_CLK                  (1 << 9)
 #define HWMOD_BLOCK_WFI                         (1 << 10)
+#define HWMOD_FORCE_MSTANDBY                    (1 << 11)
 
 /*
  * omap_hwmod._int_flags definitions
diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
index ac7e03ec952f..5112d04e7b79 100644
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -1707,9 +1707,14 @@ static struct omap_hwmod omap3xxx_usbhsotg_hwmod = {
          * Erratum ID: i479  idle_req / idle_ack mechanism potentially
          * broken when autoidle is enabled
          * workaround is to disable the autoidle bit at module level.
+         *
+         * Enabling the device in any other MIDLEMODE setting but force-idle
+         * causes core_pwrdm not enter idle states at least on OMAP3630.
+         * Note that musb has OTG_FORCESTDBY register that controls MSTANDBY
+         * signal when MIDLEMODE is set to force-idle.
          */
         .flags          = HWMOD_NO_OCP_AUTOIDLE | HWMOD_SWSUP_SIDLE
-                                | HWMOD_SWSUP_MSTANDBY,
+                                | HWMOD_FORCE_MSTANDBY,
 };
 
 /* usb_otg_hs */
diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index 0e47d2e1687c..9e0576569e07 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -2714,6 +2714,10 @@ static struct omap_ocp2scp_dev ocp2scp_dev_attr[] = {
         { }
 };
 
+static struct omap_hwmod_opt_clk ocp2scp_usb_phy_opt_clks[] = {
+        { .role = "48mhz", .clk = "ocp2scp_usb_phy_phy_48m" },
+};
+
 /* ocp2scp_usb_phy */
 static struct omap_hwmod omap44xx_ocp2scp_usb_phy_hwmod = {
         .name           = "ocp2scp_usb_phy",
@@ -2728,6 +2732,8 @@ static struct omap_hwmod omap44xx_ocp2scp_usb_phy_hwmod = {
                 },
         },
         .dev_attr       = ocp2scp_dev_attr,
+        .opt_clks       = ocp2scp_usb_phy_opt_clks,
+        .opt_clks_cnt   = ARRAY_SIZE(ocp2scp_usb_phy_opt_clks),
 };
 
 /*
diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c
index 2bdd4cf17a8f..f62b509ed08d 100644
--- a/arch/arm/mach-omap2/timer.c
+++ b/arch/arm/mach-omap2/timer.c
@@ -547,6 +547,8 @@ static inline void __init realtime_counter_init(void)
                                clksrc_nr, clksrc_src)                   \
 void __init omap##name##_gptimer_timer_init(void)                       \
 {                                                                       \
+        if (omap_clk_init)                                              \
+                omap_clk_init();                                        \
         omap_dmtimer_init();                                            \
         omap2_gp_clockevent_init((clkev_nr), clkev_src, clkev_prop);    \
         omap2_gptimer_clocksource_init((clksrc_nr), clksrc_src);        \
@@ -556,6 +558,8 @@ void __init omap##name##_gptimer_timer_init(void)			\
                                 clksrc_nr, clksrc_src)                  \
 void __init omap##name##_sync32k_timer_init(void)               \
 {                                                                       \
+        if (omap_clk_init)                                              \
+                omap_clk_init();                                        \
         omap_dmtimer_init();                                            \
         omap2_gp_clockevent_init((clkev_nr), clkev_src, clkev_prop);    \
         /* Enable the use of clocksource="gp_timer" kernel parameter */ \
diff --git a/arch/arm/mach-ux500/board-mop500-sdi.c b/arch/arm/mach-ux500/board-mop500-sdi.c
index 051b62c27102..7f2cb6c5e2c1 100644
--- a/arch/arm/mach-ux500/board-mop500-sdi.c
+++ b/arch/arm/mach-ux500/board-mop500-sdi.c
@@ -81,7 +81,6 @@ static struct stedma40_chan_cfg mop500_sdi0_dma_cfg_tx = {
 #endif
 
 struct mmci_platform_data mop500_sdi0_data = {
-        .ios_handler    = mop500_sdi0_ios_handler,
         .ocr_mask       = MMC_VDD_29_30,
         .f_max          = 50000000,
         .capabilities   = MMC_CAP_4_BIT_DATA |
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index b03457881c4b..87d2d7b38ce9 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -12,6 +12,7 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
+#include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/i2c.h>
 #include <linux/platform_data/i2c-nomadik.h>
@@ -439,6 +440,15 @@ static void mop500_prox_deactivate(struct device *dev)
         regulator_put(prox_regulator);
 }
 
+void mop500_snowball_ethernet_clock_enable(void)
+{
+        struct clk *clk;
+
+        clk = clk_get_sys("fsmc", NULL);
+        if (!IS_ERR(clk))
+                clk_prepare_enable(clk);
+}
+
 static struct cryp_platform_data u8500_cryp1_platform_data = {
                 .mem_to_engine = {
                                 .dir = STEDMA40_MEM_TO_PERIPH,
@@ -683,6 +693,8 @@ static void __init snowball_init_machine(void)
         mop500_audio_init(parent);
         mop500_uart_init(parent);
 
+        mop500_snowball_ethernet_clock_enable();
+
         /* This board has full regulator constraints */
         regulator_has_full_constraints();
 }
diff --git a/arch/arm/mach-ux500/board-mop500.h b/arch/arm/mach-ux500/board-mop500.h
index eaa605f5d90d..d38951be70df 100644
--- a/arch/arm/mach-ux500/board-mop500.h
+++ b/arch/arm/mach-ux500/board-mop500.h
@@ -104,6 +104,7 @@ void __init mop500_pinmaps_init(void);
 void __init snowball_pinmaps_init(void);
 void __init hrefv60_pinmaps_init(void);
 void mop500_audio_init(struct device *parent);
+void mop500_snowball_ethernet_clock_enable(void);
 
 int __init mop500_uib_init(void);
 void mop500_uib_i2c_add(int busnum, struct i2c_board_info *info,
diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c
index 19235cf7bbe3..f1a581844372 100644
--- a/arch/arm/mach-ux500/cpu-db8500.c
+++ b/arch/arm/mach-ux500/cpu-db8500.c
@@ -312,9 +312,10 @@ static void __init u8500_init_machine(void)
         /* Pinmaps must be in place before devices register */
         if (of_machine_is_compatible("st-ericsson,mop500"))
                 mop500_pinmaps_init();
-        else if (of_machine_is_compatible("calaosystems,snowball-a9500"))
+        else if (of_machine_is_compatible("calaosystems,snowball-a9500")) {
                 snowball_pinmaps_init();
-        else if (of_machine_is_compatible("st-ericsson,hrefv60+"))
+                mop500_snowball_ethernet_clock_enable();
+        } else if (of_machine_is_compatible("st-ericsson,hrefv60+"))
                 hrefv60_pinmaps_init();
         else if (of_machine_is_compatible("st-ericsson,ccu9540")) {}
                 /* TODO: Add pinmaps for ccu9540 board. */
diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c
index c2f37390308a..c465faca51b0 100644
--- a/arch/arm/mm/cache-l2x0.c
+++ b/arch/arm/mm/cache-l2x0.c
@@ -299,7 +299,7 @@ static void l2x0_unlock(u32 cache_id)
         int lockregs;
         int i;
 
-        switch (cache_id) {
+        switch (cache_id & L2X0_CACHE_ID_PART_MASK) {
         case L2X0_CACHE_ID_PART_L310:
                 lockregs = 8;
                 break;
@@ -333,15 +333,14 @@ void __init l2x0_init(void __iomem *base, u32 aux_val, u32 aux_mask)
         if (cache_id_part_number_from_dt)
                 cache_id = cache_id_part_number_from_dt;
         else
-                cache_id = readl_relaxed(l2x0_base + L2X0_CACHE_ID)
-                        & L2X0_CACHE_ID_PART_MASK;
+                cache_id = readl_relaxed(l2x0_base + L2X0_CACHE_ID);
         aux = readl_relaxed(l2x0_base + L2X0_AUX_CTRL);
 
         aux &= aux_mask;
         aux |= aux_val;
 
         /* Determine the number of ways */
-        switch (cache_id) {
+        switch (cache_id & L2X0_CACHE_ID_PART_MASK) {
         case L2X0_CACHE_ID_PART_L310:
                 if (aux & (1 << 16))
                         ways = 16;
@@ -725,7 +724,6 @@ static const struct l2x0_of_data pl310_data = {
                 .flush_all   = l2x0_flush_all,
                 .inv_all     = l2x0_inv_all,
                 .disable     = l2x0_disable,
-                .set_debug   = pl310_set_debug,
         },
 };
 
@@ -814,9 +812,8 @@ int __init l2x0_of_init(u32 aux_val, u32 aux_mask)
                 data->save();
 
         of_init = true;
-        l2x0_init(l2x0_base, aux_val, aux_mask);
-
         memcpy(&outer_cache, &data->outer_cache, sizeof(outer_cache));
+        l2x0_init(l2x0_base, aux_val, aux_mask);
 
         return 0;
 }
diff --git a/arch/arm/mm/context.c b/arch/arm/mm/context.c
index a5a4b2bc42ba..2ac37372ef52 100644
--- a/arch/arm/mm/context.c
+++ b/arch/arm/mm/context.c
@@ -48,7 +48,7 @@ static DEFINE_RAW_SPINLOCK(cpu_asid_lock);
 static atomic64_t asid_generation = ATOMIC64_INIT(ASID_FIRST_VERSION);
 static DECLARE_BITMAP(asid_map, NUM_USER_ASIDS);
 
-static DEFINE_PER_CPU(atomic64_t, active_asids);
+DEFINE_PER_CPU(atomic64_t, active_asids);
 static DEFINE_PER_CPU(u64, reserved_asids);
 static cpumask_t tlb_flush_pending;
 
@@ -215,6 +215,7 @@ void check_and_switch_context(struct mm_struct *mm, struct task_struct *tsk)
         if (cpumask_test_and_clear_cpu(cpu, &tlb_flush_pending)) {
                 local_flush_bp_all();
                 local_flush_tlb_all();
+                dummy_flush_tlb_a15_erratum();
         }
 
         atomic64_set(&per_cpu(active_asids, cpu), asid);
diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index e95a996ab78f..78978945492a 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -598,39 +598,60 @@ static void __init alloc_init_pte(pmd_t *pmd, unsigned long addr,
         } while (pte++, addr += PAGE_SIZE, addr != end);
 }
 
-static void __init alloc_init_section(pud_t *pud, unsigned long addr,
-                                      unsigned long end, phys_addr_t phys,
-                                      const struct mem_type *type)
+static void __init map_init_section(pmd_t *pmd, unsigned long addr,
+                        unsigned long end, phys_addr_t phys,
+                        const struct mem_type *type)
 {
-        pmd_t *pmd = pmd_offset(pud, addr);
-
+#ifndef CONFIG_ARM_LPAE
         /*
-         * Try a section mapping - end, addr and phys must all be aligned
-         * to a section boundary.  Note that PMDs refer to the individual
-         * L1 entries, whereas PGDs refer to a group of L1 entries making
-         * up one logical pointer to an L2 table.
+         * In classic MMU format, puds and pmds are folded in to
+         * the pgds. pmd_offset gives the PGD entry. PGDs refer to a
+         * group of L1 entries making up one logical pointer to
+         * an L2 table (2MB), where as PMDs refer to the individual
+         * L1 entries (1MB). Hence increment to get the correct
+         * offset for odd 1MB sections.
+         * (See arch/arm/include/asm/pgtable-2level.h)
          */
-        if (type->prot_sect && ((addr | end | phys) & ~SECTION_MASK) == 0) {
-                pmd_t *p = pmd;
-
-#ifndef CONFIG_ARM_LPAE
-                if (addr & SECTION_SIZE)
-                        pmd++;
+        if (addr & SECTION_SIZE)
+                pmd++;
 #endif
+        do {
+                *pmd = __pmd(phys | type->prot_sect);
+                phys += SECTION_SIZE;
+        } while (pmd++, addr += SECTION_SIZE, addr != end);
 
-                do {
-                        *pmd = __pmd(phys | type->prot_sect);
-                        phys += SECTION_SIZE;
-                } while (pmd++, addr += SECTION_SIZE, addr != end);
+        flush_pmd_entry(pmd);
+}
 
-                flush_pmd_entry(p);
-        } else {
+static void __init alloc_init_pmd(pud_t *pud, unsigned long addr,
+                                      unsigned long end, phys_addr_t phys,
+                                      const struct mem_type *type)
+{
+        pmd_t *pmd = pmd_offset(pud, addr);
+        unsigned long next;
+
+        do {
                 /*
-                 * No need to loop; pte's aren't interested in the
-                 * individual L1 entries.
+                 * With LPAE, we must loop over to map
+                 * all the pmds for the given range.
                  */
-                alloc_init_pte(pmd, addr, end, __phys_to_pfn(phys), type);
-        }
+                next = pmd_addr_end(addr, end);
+
+                /*
+                 * Try a section mapping - addr, next and phys must all be
+                 * aligned to a section boundary.
+                 */
+                if (type->prot_sect &&
+                                ((addr | next | phys) & ~SECTION_MASK) == 0) {
+                        map_init_section(pmd, addr, next, phys, type);
+                } else {
+                        alloc_init_pte(pmd, addr, next,
+                                                __phys_to_pfn(phys), type);
+                }
+
+                phys += next - addr;
+
+        } while (pmd++, addr = next, addr != end);
 }
 
 static void __init alloc_init_pud(pgd_t *pgd, unsigned long addr,
@@ -641,7 +662,7 @@ static void __init alloc_init_pud(pgd_t *pgd, unsigned long addr,
 
         do {
                 next = pud_addr_end(addr, end);
-                alloc_init_section(pud, addr, next, phys, type);
+                alloc_init_pmd(pud, addr, next, phys, type);
                 phys += next - addr;
         } while (pud++, addr = next, addr != end);
 }
diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S
index 3a3c015f8d5c..f584d3f5b37c 100644
--- a/arch/arm/mm/proc-v7.S
+++ b/arch/arm/mm/proc-v7.S
@@ -420,7 +420,7 @@ __v7_pj4b_proc_info:
 __v7_ca7mp_proc_info:
         .long   0x410fc070
         .long   0xff0ffff0
-        __v7_proc __v7_ca7mp_setup, hwcaps = HWCAP_IDIV
+        __v7_proc __v7_ca7mp_setup
         .size   __v7_ca7mp_proc_info, . - __v7_ca7mp_proc_info
 
         /*
@@ -430,10 +430,25 @@ __v7_ca7mp_proc_info:
 __v7_ca15mp_proc_info:
         .long   0x410fc0f0
         .long   0xff0ffff0
-        __v7_proc __v7_ca15mp_setup, hwcaps = HWCAP_IDIV
+        __v7_proc __v7_ca15mp_setup
         .size   __v7_ca15mp_proc_info, . - __v7_ca15mp_proc_info
 
         /*
+         * Qualcomm Inc. Krait processors.
+         */
+        .type   __krait_proc_info, #object
+__krait_proc_info:
+        .long   0x510f0400              @ Required ID value
+        .long   0xff0ffc00              @ Mask for ID
+        /*
+         * Some Krait processors don't indicate support for SDIV and UDIV
+         * instructions in the ARM instruction set, even though they actually
+         * do support them.
+         */
+        __v7_proc __v7_setup, hwcaps = HWCAP_IDIV
+        .size   __krait_proc_info, . - __krait_proc_info
+
+        /*
          * Match any ARMv7 processor core.
          */
         .type   __v7_proc_info, #object