175 files changed, 1006 insertions, 730 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index f95ba14ae3d0..67874b82a4ed 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -371,7 +371,6 @@ config ARCH_CNS3XXX
 config ARCH_CLPS711X
        bool "Cirrus Logic CLPS711x/EP721x/EP731x-based"
        select ARCH_REQUIRE_GPIOLIB
-        select ARCH_USES_GETTIMEOFFSET
        select AUTO_ZRELADDR
        select CLKDEV_LOOKUP
        select COMMON_CLK
@@ -1230,6 +1229,7 @@ config ARM_ERRATA_430973
 config ARM_ERRATA_458693
        bool "ARM errata: Processor deadlock when a false hazard is created"
        depends on CPU_V7
+        depends on !ARCH_MULTIPLATFORM
        help
          This option enables the workaround for the 458693 Cortex-A8 (r2p0)
          erratum. For very specific sequences of memory operations, it is
@@ -1243,6 +1243,7 @@ config ARM_ERRATA_458693
 config ARM_ERRATA_460075
        bool "ARM errata: Data written to the L2 cache can be overwritten with stale data"
        depends on CPU_V7
+        depends on !ARCH_MULTIPLATFORM
        help
          This option enables the workaround for the 460075 Cortex-A8 (r2p0)
          erratum. Any asynchronous access to the L2 cache may encounter a
@@ -1255,6 +1256,7 @@ config ARM_ERRATA_460075
 config ARM_ERRATA_742230
        bool "ARM errata: DMB operation may be faulty"
        depends on CPU_V7 && SMP
+        depends on !ARCH_MULTIPLATFORM
        help
          This option enables the workaround for the 742230 Cortex-A9
          (r1p0..r2p2) erratum. Under rare circumstances, a DMB instruction
@@ -1267,6 +1269,7 @@ config ARM_ERRATA_742230
 config ARM_ERRATA_742231
        bool "ARM errata: Incorrect hazard handling in the SCU may lead to data corruption"
        depends on CPU_V7 && SMP
+        depends on !ARCH_MULTIPLATFORM
        help
          This option enables the workaround for the 742231 Cortex-A9
          (r2p0..r2p2) erratum. Under certain conditions, specific to the
@@ -1317,6 +1320,7 @@ config PL310_ERRATA_727915
 config ARM_ERRATA_743622
        bool "ARM errata: Faulty hazard checking in the Store Buffer may lead to data corruption"
        depends on CPU_V7
+        depends on !ARCH_MULTIPLATFORM
        help
          This option enables the workaround for the 743622 Cortex-A9
          (r2p*) erratum. Under very rare conditions, a faulty
@@ -1330,6 +1334,7 @@ config ARM_ERRATA_743622
 config ARM_ERRATA_751472
        bool "ARM errata: Interrupted ICIALLUIS may prevent completion of broadcasted operation"
        depends on CPU_V7
+        depends on !ARCH_MULTIPLATFORM
        help
          This option enables the workaround for the 751472 Cortex-A9 (prior
          to r3p0) erratum. An interrupted ICIALLUIS operation may prevent the
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index e44da40d984f..5ebb44fe826a 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -155,6 +155,7 @@ dtb-$(CONFIG_ARCH_VT8500) += vt8500-bv07.dtb \
 dtb-$(CONFIG_ARCH_ZYNQ) += zynq-zc702.dtb
 targets += dtbs
+targets += $(dtb-y)
 endif
 # *.dtb used to be generated in the directory above. Clean out the
diff --git a/arch/arm/boot/dts/armada-370-db.dts b/arch/arm/boot/dts/armada-370-db.dts
index 00044026ef1f..9b82facb2561 100644
--- a/arch/arm/boot/dts/armada-370-db.dts
+++ b/arch/arm/boot/dts/armada-370-db.dts
@@ -26,7 +26,7 @@
        memory {
                device_type = "memory";
-                reg = <0x00000000 0x20000000>; /* 512 MB */
+                reg = <0x00000000 0x40000000>; /* 1 GB */
        };
        soc {
diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi
index cf6c48a09eac..4c0abe85405f 100644
--- a/arch/arm/boot/dts/armada-370-xp.dtsi
+++ b/arch/arm/boot/dts/armada-370-xp.dtsi
@@ -50,17 +50,19 @@
                ranges;
                serial@d0012000 {
-                                compatible = "ns16550";
+                                compatible = "snps,dw-apb-uart";
                                reg = <0xd0012000 0x100>;
                                reg-shift = <2>;
                                interrupts = <41>;
+                                reg-io-width = <4>;
                                status = "disabled";
                };
                serial@d0012100 {
-                                compatible = "ns16550";
+                                compatible = "snps,dw-apb-uart";
                                reg = <0xd0012100 0x100>;
                                reg-shift = <2>;
                                interrupts = <42>;
+                                reg-io-width = <4>;
                                status = "disabled";
                };
diff --git a/arch/arm/boot/dts/armada-xp-mv78230.dtsi b/arch/arm/boot/dts/armada-xp-mv78230.dtsi
index c45c7b4dc352..e041f42ed711 100644
--- a/arch/arm/boot/dts/armada-xp-mv78230.dtsi
+++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi
@@ -34,7 +34,14 @@
                reg = <0>;
                clocks = <&cpuclk 0>;
            };
-        }
+            cpu@1 {
+                device_type = "cpu";
+                compatible = "marvell,sheeva-v7";
+                reg = <1>;
+                clocks = <&cpuclk 1>;
+            };
+        };
        soc {
                pinctrl {
@@ -43,27 +50,25 @@
                };
                gpio0: gpio@d0018100 {
-                        compatible = "marvell,armadaxp-gpio";
+                        compatible = "marvell,orion-gpio";
-                        reg = <0xd0018100 0x40>,
+                        reg = <0xd0018100 0x40>;
-                            <0xd0018800 0x30>;
                        ngpios = <32>;
                        gpio-controller;
                        #gpio-cells = <2>;
                        interrupt-controller;
                        #interrupts-cells = <2>;
-                        interrupts = <16>, <17>, <18>, <19>;
+                        interrupts = <82>, <83>, <84>, <85>;
                };
                gpio1: gpio@d0018140 {
-                        compatible = "marvell,armadaxp-gpio";
+                        compatible = "marvell,orion-gpio";
-                        reg = <0xd0018140 0x40>,
+                        reg = <0xd0018140 0x40>;
-                            <0xd0018840 0x30>;
                        ngpios = <17>;
                        gpio-controller;
                        #gpio-cells = <2>;
                        interrupt-controller;
                        #interrupts-cells = <2>;
-                        interrupts = <20>, <21>, <22>;
+                        interrupts = <87>, <88>, <89>;
                };
        };
 };
diff --git a/arch/arm/boot/dts/armada-xp-mv78260.dtsi b/arch/arm/boot/dts/armada-xp-mv78260.dtsi
index a2aee5707377..9e23bd8c9536 100644
--- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi
+++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi
@@ -51,39 +51,44 @@
                };
                gpio0: gpio@d0018100 {
-                        compatible = "marvell,armadaxp-gpio";
+                        compatible = "marvell,orion-gpio";
-                        reg = <0xd0018100 0x40>,
+                        reg = <0xd0018100 0x40>;
-                            <0xd0018800 0x30>;
                        ngpios = <32>;
                        gpio-controller;
                        #gpio-cells = <2>;
                        interrupt-controller;
                        #interrupts-cells = <2>;
-                        interrupts = <16>, <17>, <18>, <19>;
+                        interrupts = <82>, <83>, <84>, <85>;
                };
                gpio1: gpio@d0018140 {
-                        compatible = "marvell,armadaxp-gpio";
+                        compatible = "marvell,orion-gpio";
-                        reg = <0xd0018140 0x40>,
+                        reg = <0xd0018140 0x40>;
-                            <0xd0018840 0x30>;
                        ngpios = <32>;
                        gpio-controller;
                        #gpio-cells = <2>;
                        interrupt-controller;
                        #interrupts-cells = <2>;
-                        interrupts = <20>, <21>, <22>, <23>;
+                        interrupts = <87>, <88>, <89>, <90>;
                };
                gpio2: gpio@d0018180 {
-                        compatible = "marvell,armadaxp-gpio";
+                        compatible = "marvell,orion-gpio";
-                        reg = <0xd0018180 0x40>,
+                        reg = <0xd0018180 0x40>;
-                            <0xd0018870 0x30>;
                        ngpios = <3>;
                        gpio-controller;
                        #gpio-cells = <2>;
                        interrupt-controller;
                        #interrupts-cells = <2>;
-                        interrupts = <24>;
+                        interrupts = <91>;
+                };
+                ethernet@d0034000 {
+                                compatible = "marvell,armada-370-neta";
+                                reg = <0xd0034000 0x2500>;
+                                interrupts = <14>;
+                                clocks = <&gateclk 1>;
+                                status = "disabled";
                };
        };
 };
diff --git a/arch/arm/boot/dts/armada-xp-mv78460.dtsi b/arch/arm/boot/dts/armada-xp-mv78460.dtsi
index da03a129243a..965966110e38 100644
--- a/arch/arm/boot/dts/armada-xp-mv78460.dtsi
+++ b/arch/arm/boot/dts/armada-xp-mv78460.dtsi
@@ -66,39 +66,44 @@
                };
                gpio0: gpio@d0018100 {
-                        compatible = "marvell,armadaxp-gpio";
+                        compatible = "marvell,orion-gpio";
-                        reg = <0xd0018100 0x40>,
+                        reg = <0xd0018100 0x40>;
-                            <0xd0018800 0x30>;
                        ngpios = <32>;
                        gpio-controller;
                        #gpio-cells = <2>;
                        interrupt-controller;
                        #interrupts-cells = <2>;
-                        interrupts = <16>, <17>, <18>, <19>;
+                        interrupts = <82>, <83>, <84>, <85>;
                };
                gpio1: gpio@d0018140 {
-                        compatible = "marvell,armadaxp-gpio";
+                        compatible = "marvell,orion-gpio";
-                        reg = <0xd0018140 0x40>,
+                        reg = <0xd0018140 0x40>;
-                            <0xd0018840 0x30>;
                        ngpios = <32>;
                        gpio-controller;
                        #gpio-cells = <2>;
                        interrupt-controller;
                        #interrupts-cells = <2>;
-                        interrupts = <20>, <21>, <22>, <23>;
+                        interrupts = <87>, <88>, <89>, <90>;
                };
                gpio2: gpio@d0018180 {
-                        compatible = "marvell,armadaxp-gpio";
+                        compatible = "marvell,orion-gpio";
-                        reg = <0xd0018180 0x40>,
+                        reg = <0xd0018180 0x40>;
-                            <0xd0018870 0x30>;
                        ngpios = <3>;
                        gpio-controller;
                        #gpio-cells = <2>;
                        interrupt-controller;
                        #interrupts-cells = <2>;
-                        interrupts = <24>;
+                        interrupts = <91>;
+                };
+                ethernet@d0034000 {
+                                compatible = "marvell,armada-370-neta";
+                                reg = <0xd0034000 0x2500>;
+                                interrupts = <14>;
+                                clocks = <&gateclk 1>;
+                                status = "disabled";
                };
        };
 };
diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi
index 367aa3f94912..2e37ef101c90 100644
--- a/arch/arm/boot/dts/armada-xp.dtsi
+++ b/arch/arm/boot/dts/armada-xp.dtsi
@@ -42,17 +42,19 @@
        soc {
                serial@d0012200 {
-                                compatible = "ns16550";
+                                compatible = "snps,dw-apb-uart";
                                reg = <0xd0012200 0x100>;
                                reg-shift = <2>;
                                interrupts = <43>;
+                                reg-io-width = <4>;
                                status = "disabled";
                };
                serial@d0012300 {
-                                compatible = "ns16550";
+                                compatible = "snps,dw-apb-uart";
                                reg = <0xd0012300 0x100>;
                                reg-shift = <2>;
                                interrupts = <44>;
+                                reg-io-width = <4>;
                                status = "disabled";
                };
@@ -93,14 +95,6 @@
                                status = "disabled";
                };
-                ethernet@d0034000 {
-                                compatible = "marvell,armada-370-neta";
-                                reg = <0xd0034000 0x2500>;
-                                interrupts = <14>;
-                                clocks = <&gateclk 1>;
-                                status = "disabled";
-                };
                xor@d0060900 {
                        compatible = "marvell,orion-xor";
                        reg = <0xd0060900 0x100
diff --git a/arch/arm/boot/dts/at91rm9200.dtsi b/arch/arm/boot/dts/at91rm9200.dtsi
index e154f242c680..222047f1ece9 100644
--- a/arch/arm/boot/dts/at91rm9200.dtsi
+++ b/arch/arm/boot/dts/at91rm9200.dtsi
@@ -336,8 +336,8 @@
        i2c@0 {
                compatible = "i2c-gpio";
-                gpios = <&pioA 23 0 /* sda */
+                gpios = <&pioA 25 0 /* sda */
-                         &pioA 24 0 /* scl */
+                         &pioA 26 0 /* scl */
                        >;
                i2c-gpio,sda-open-drain;
                i2c-gpio,scl-open-drain;
diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi
index 68bccf41a2c6..cb7bcc51608d 100644
--- a/arch/arm/boot/dts/at91sam9260.dtsi
+++ b/arch/arm/boot/dts/at91sam9260.dtsi
@@ -306,6 +306,22 @@
                                        };
                                };
+                                ssc0 {
+                                        pinctrl_ssc0_tx: ssc0_tx-0 {
+                                                atmel,pins =
+                                                        <1 16 0x1 0x0   /* PB16 periph A */
+                                                         1 17 0x1 0x0   /* PB17 periph A */
+                                                         1 18 0x1 0x0>; /* PB18 periph A */
+                                        };
+                                        pinctrl_ssc0_rx: ssc0_rx-0 {
+                                                atmel,pins =
+                                                        <1 19 0x1 0x0   /* PB19 periph A */
+                                                         1 20 0x1 0x0   /* PB20 periph A */
+                                                         1 21 0x1 0x0>; /* PB21 periph A */
+                                        };
+                                };
                                pioA: gpio@fffff400 {
                                        compatible = "atmel,at91rm9200-gpio";
                                        reg = <0xfffff400 0x200>;
@@ -450,6 +466,8 @@
                                compatible = "atmel,at91rm9200-ssc";
                                reg = <0xfffbc000 0x4000>;
                                interrupts = <14 4 5>;
+                                pinctrl-names = "default";
+                                pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
                                status = "disabled";
                        };
diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi
index 32ec62cf5385..271d4de026e9 100644
--- a/arch/arm/boot/dts/at91sam9263.dtsi
+++ b/arch/arm/boot/dts/at91sam9263.dtsi
@@ -271,6 +271,38 @@
                                        };
                                };
+                                ssc0 {
+                                        pinctrl_ssc0_tx: ssc0_tx-0 {
+                                                atmel,pins =
+                                                        <1 0 0x2 0x0    /* PB0 periph B */
+                                                         1 1 0x2 0x0    /* PB1 periph B */
+                                                         1 2 0x2 0x0>;  /* PB2 periph B */
+                                        };
+                                        pinctrl_ssc0_rx: ssc0_rx-0 {
+                                                atmel,pins =
+                                                        <1 3 0x2 0x0    /* PB3 periph B */
+                                                         1 4 0x2 0x0    /* PB4 periph B */
+                                                         1 5 0x2 0x0>;  /* PB5 periph B */
+                                        };
+                                };
+                                ssc1 {
+                                        pinctrl_ssc1_tx: ssc1_tx-0 {
+                                                atmel,pins =
+                                                        <1 6 0x1 0x0    /* PB6 periph A */
+                                                         1 7 0x1 0x0    /* PB7 periph A */
+                                                         1 8 0x1 0x0>;  /* PB8 periph A */
+                                        };
+                                        pinctrl_ssc1_rx: ssc1_rx-0 {
+                                                atmel,pins =
+                                                        <1 9 0x1 0x0    /* PB9 periph A */
+                                                         1 10 0x1 0x0   /* PB10 periph A */
+                                                         1 11 0x1 0x0>; /* PB11 periph A */
+                                        };
+                                };
                                pioA: gpio@fffff200 {
                                        compatible = "atmel,at91rm9200-gpio";
                                        reg = <0xfffff200 0x200>;
@@ -368,6 +400,8 @@
                                compatible = "atmel,at91rm9200-ssc";
                                reg = <0xfff98000 0x4000>;
                                interrupts = <16 4 5>;
+                                pinctrl-names = "default";
+                                pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
                                status = "disabled";
                        };
@@ -375,6 +409,8 @@
                                compatible = "atmel,at91rm9200-ssc";
                                reg = <0xfff9c000 0x4000>;
                                interrupts = <17 4 5>;
+                                pinctrl-names = "default";
+                                pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
                                status = "disabled";
                        };
diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi
index 231858ffd850..6b1d4cab24c2 100644
--- a/arch/arm/boot/dts/at91sam9g45.dtsi
+++ b/arch/arm/boot/dts/at91sam9g45.dtsi
@@ -290,6 +290,38 @@
                                        };
                                };
+                                ssc0 {
+                                        pinctrl_ssc0_tx: ssc0_tx-0 {
+                                                atmel,pins =
+                                                        <3 0 0x1 0x0    /* PD0 periph A */
+                                                         3 1 0x1 0x0    /* PD1 periph A */
+                                                         3 2 0x1 0x0>;  /* PD2 periph A */
+                                        };
+                                        pinctrl_ssc0_rx: ssc0_rx-0 {
+                                                atmel,pins =
+                                                        <3 3 0x1 0x0    /* PD3 periph A */
+                                                         3 4 0x1 0x0    /* PD4 periph A */
+                                                         3 5 0x1 0x0>;  /* PD5 periph A */
+                                        };
+                                };
+                                ssc1 {
+                                        pinctrl_ssc1_tx: ssc1_tx-0 {
+                                                atmel,pins =
+                                                        <3 10 0x1 0x0   /* PD10 periph A */
+                                                         3 11 0x1 0x0   /* PD11 periph A */
+                                                         3 12 0x1 0x0>; /* PD12 periph A */
+                                        };
+                                        pinctrl_ssc1_rx: ssc1_rx-0 {
+                                                atmel,pins =
+                                                        <3 13 0x1 0x0   /* PD13 periph A */
+                                                         3 14 0x1 0x0   /* PD14 periph A */
+                                                         3 15 0x1 0x0>; /* PD15 periph A */
+                                        };
+                                };
                                pioA: gpio@fffff200 {
                                        compatible = "atmel,at91rm9200-gpio";
                                        reg = <0xfffff200 0x200>;
@@ -425,6 +457,8 @@
                                compatible = "atmel,at91sam9g45-ssc";
                                reg = <0xfff9c000 0x4000>;
                                interrupts = <16 4 5>;
+                                pinctrl-names = "default";
+                                pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
                                status = "disabled";
                        };
@@ -432,6 +466,8 @@
                                compatible = "atmel,at91sam9g45-ssc";
                                reg = <0xfffa0000 0x4000>;
                                interrupts = <17 4 5>;
+                                pinctrl-names = "default";
+                                pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
                                status = "disabled";
                        };
diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi
index e9efb34f4379..80e29c605d4e 100644
--- a/arch/arm/boot/dts/at91sam9n12.dtsi
+++ b/arch/arm/boot/dts/at91sam9n12.dtsi
@@ -28,6 +28,7 @@
                tcb1 = &tcb1;
                i2c0 = &i2c0;
                i2c1 = &i2c1;
+                ssc0 = &ssc0;
        };
        cpus {
                cpu@0 {
@@ -244,6 +245,22 @@
                                        };
                                };
+                                ssc0 {
+                                        pinctrl_ssc0_tx: ssc0_tx-0 {
+                                                atmel,pins =
+                                                        <0 24 0x2 0x0   /* PA24 periph B */
+                                                         0 25 0x2 0x0   /* PA25 periph B */
+                                                         0 26 0x2 0x0>; /* PA26 periph B */
+                                        };
+                                        pinctrl_ssc0_rx: ssc0_rx-0 {
+                                                atmel,pins =
+                                                        <0 27 0x2 0x0   /* PA27 periph B */
+                                                         0 28 0x2 0x0   /* PA28 periph B */
+                                                         0 29 0x2 0x0>; /* PA29 periph B */
+                                        };
+                                };
                                pioA: gpio@fffff400 {
                                        compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
                                        reg = <0xfffff400 0x200>;
@@ -294,6 +311,15 @@
                                status = "disabled";
                        };
+                        ssc0: ssc@f0010000 {
+                                compatible = "atmel,at91sam9g45-ssc";
+                                reg = <0xf0010000 0x4000>;
+                                interrupts = <28 4 5>;
+                                pinctrl-names = "default";
+                                pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
+                                status = "disabled";
+                        };
                        usart0: serial@f801c000 {
                                compatible = "atmel,at91sam9260-usart";
                                reg = <0xf801c000 0x4000>;
diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
index 40ac3a4eb1ab..8ecca6948d81 100644
--- a/arch/arm/boot/dts/at91sam9x5.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5.dtsi
@@ -88,13 +88,6 @@
                                interrupts = <1 4 7>;
                        };
-                        ssc0: ssc@f0010000 {
-                                compatible = "atmel,at91sam9g45-ssc";
-                                reg = <0xf0010000 0x4000>;
-                                interrupts = <28 4 5>;
-                                status = "disabled";
-                        };
                        tcb0: timer@f8008000 {
                                compatible = "atmel,at91sam9x5-tcb";
                                reg = <0xf8008000 0x100>;
@@ -150,6 +143,11 @@
                                                atmel,pins =
                                                        <0 3 0x1 0x0>;  /* PA3 periph A */
                                        };
+                                        pinctrl_usart0_sck: usart0_sck-0 {
+                                                atmel,pins =
+                                                        <0 4 0x1 0x0>;  /* PA4 periph A */
+                                        };
                                };
                                usart1 {
@@ -161,12 +159,17 @@
                                        pinctrl_usart1_rts: usart1_rts-0 {
                                                atmel,pins =
-                                                        <3 27 0x3 0x0>; /* PC27 periph C */
+                                                        <2 27 0x3 0x0>; /* PC27 periph C */
                                        };
                                        pinctrl_usart1_cts: usart1_cts-0 {
                                                atmel,pins =
-                                                        <3 28 0x3 0x0>; /* PC28 periph C */
+                                                        <2 28 0x3 0x0>; /* PC28 periph C */
+                                        };
+                                        pinctrl_usart1_sck: usart1_sck-0 {
+                                                atmel,pins =
+                                                        <2 28 0x3 0x0>; /* PC29 periph C */
                                        };
                                };
@@ -179,46 +182,56 @@
                                        pinctrl_uart2_rts: uart2_rts-0 {
                                                atmel,pins =
-                                                        <0 0 0x2 0x0>;  /* PB0 periph B */
+                                                        <1 0 0x2 0x0>;  /* PB0 periph B */
                                        };
                                        pinctrl_uart2_cts: uart2_cts-0 {
                                                atmel,pins =
-                                                        <0 1 0x2 0x0>;  /* PB1 periph B */
+                                                        <1 1 0x2 0x0>;  /* PB1 periph B */
+                                        };
+                                        pinctrl_usart2_sck: usart2_sck-0 {
+                                                atmel,pins =
+                                                        <1 2 0x2 0x0>;  /* PB2 periph B */
                                        };
                                };
                                usart3 {
                                        pinctrl_uart3: usart3-0 {
                                                atmel,pins =
-                                                        <3 23 0x2 0x1   /* PC22 periph B with pullup */
+                                                        <2 23 0x2 0x1   /* PC22 periph B with pullup */
-                                                         3 23 0x2 0x0>; /* PC23 periph B */
+                                                         2 23 0x2 0x0>; /* PC23 periph B */
                                        };
                                        pinctrl_usart3_rts: usart3_rts-0 {
                                                atmel,pins =
-                                                        <3 24 0x2 0x0>; /* PC24 periph B */
+                                                        <2 24 0x2 0x0>; /* PC24 periph B */
                                        };
                                        pinctrl_usart3_cts: usart3_cts-0 {
                                                atmel,pins =
-                                                        <3 25 0x2 0x0>; /* PC25 periph B */
+                                                        <2 25 0x2 0x0>; /* PC25 periph B */
+                                        };
+                                        pinctrl_usart3_sck: usart3_sck-0 {
+                                                atmel,pins =
+                                                        <2 26 0x2 0x0>; /* PC26 periph B */
                                        };
                                };
                                uart0 {
                                        pinctrl_uart0: uart0-0 {
                                                atmel,pins =
-                                                        <3 8 0x3 0x0    /* PC8 periph C */
+                                                        <2 8 0x3 0x0    /* PC8 periph C */
-                                                         3 9 0x3 0x1>;  /* PC9 periph C with pullup */
+                                                         2 9 0x3 0x1>;  /* PC9 periph C with pullup */
                                        };
                                };
                                uart1 {
                                        pinctrl_uart1: uart1-0 {
                                                atmel,pins =
-                                                        <3 16 0x3 0x0   /* PC16 periph C */
+                                                        <2 16 0x3 0x0   /* PC16 periph C */
-                                                         3 17 0x3 0x1>; /* PC17 periph C with pullup */
+                                                         2 17 0x3 0x1>; /* PC17 periph C with pullup */
                                        };
                                };
@@ -247,14 +260,14 @@
                                        pinctrl_macb0_rmii_mii: macb0_rmii_mii-0 {
                                                atmel,pins =
-                                                        <1 8 0x1 0x0    /* PA8 periph A */
+                                                        <1 8 0x1 0x0    /* PB8 periph A */
-                                                         1 11 0x1 0x0   /* PA11 periph A */
+                                                         1 11 0x1 0x0   /* PB11 periph A */
-                                                         1 12 0x1 0x0   /* PA12 periph A */
+                                                         1 12 0x1 0x0   /* PB12 periph A */
-                                                         1 13 0x1 0x0   /* PA13 periph A */
+                                                         1 13 0x1 0x0   /* PB13 periph A */
-                                                         1 14 0x1 0x0   /* PA14 periph A */
+                                                         1 14 0x1 0x0   /* PB14 periph A */
-                                                         1 15 0x1 0x0   /* PA15 periph A */
+                                                         1 15 0x1 0x0   /* PB15 periph A */
-                                                         1 16 0x1 0x0   /* PA16 periph A */
+                                                         1 16 0x1 0x0   /* PB16 periph A */
-                                                         1 17 0x1 0x0>; /* PA17 periph A */
+                                                         1 17 0x1 0x0>; /* PB17 periph A */
                                        };
                                };
@@ -290,6 +303,22 @@
                                        };
                                };
+                                ssc0 {
+                                        pinctrl_ssc0_tx: ssc0_tx-0 {
+                                                atmel,pins =
+                                                        <0 24 0x2 0x0   /* PA24 periph B */
+                                                         0 25 0x2 0x0   /* PA25 periph B */
+                                                         0 26 0x2 0x0>; /* PA26 periph B */
+                                        };
+                                        pinctrl_ssc0_rx: ssc0_rx-0 {
+                                                atmel,pins =
+                                                        <0 27 0x2 0x0   /* PA27 periph B */
+                                                         0 28 0x2 0x0   /* PA28 periph B */
+                                                         0 29 0x2 0x0>; /* PA29 periph B */
+                                        };
+                                };
                                pioA: gpio@fffff400 {
                                        compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
                                        reg = <0xfffff400 0x200>;
@@ -333,6 +362,15 @@
                                };
                        };
+                        ssc0: ssc@f0010000 {
+                                compatible = "atmel,at91sam9g45-ssc";
+                                reg = <0xf0010000 0x4000>;
+                                interrupts = <28 4 5>;
+                                pinctrl-names = "default";
+                                pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
+                                status = "disabled";
+                        };
                        mmc0: mmc@f0008000 {
                                compatible = "atmel,hsmci";
                                reg = <0xf0008000 0x600>;
diff --git a/arch/arm/boot/dts/cros5250-common.dtsi b/arch/arm/boot/dts/cros5250-common.dtsi
index fddd17417433..46c098017036 100644
--- a/arch/arm/boot/dts/cros5250-common.dtsi
+++ b/arch/arm/boot/dts/cros5250-common.dtsi
@@ -96,8 +96,8 @@
                fifo-depth = <0x80>;
                card-detect-delay = <200>;
                samsung,dw-mshc-ciu-div = <3>;
-                samsung,dw-mshc-sdr-timing = <2 3 3>;
+                samsung,dw-mshc-sdr-timing = <2 3>;
-                samsung,dw-mshc-ddr-timing = <1 2 3>;
+                samsung,dw-mshc-ddr-timing = <1 2>;
                slot@0 {
                        reg = <0>;
@@ -120,8 +120,8 @@
                fifo-depth = <0x80>;
                card-detect-delay = <200>;
                samsung,dw-mshc-ciu-div = <3>;
-                samsung,dw-mshc-sdr-timing = <2 3 3>;
+                samsung,dw-mshc-sdr-timing = <2 3>;
-                samsung,dw-mshc-ddr-timing = <1 2 3>;
+                samsung,dw-mshc-ddr-timing = <1 2>;
                slot@0 {
                        reg = <0>;
@@ -141,8 +141,8 @@
                fifo-depth = <0x80>;
                card-detect-delay = <200>;
                samsung,dw-mshc-ciu-div = <3>;
-                samsung,dw-mshc-sdr-timing = <2 3 3>;
+                samsung,dw-mshc-sdr-timing = <2 3>;
-                samsung,dw-mshc-ddr-timing = <1 2 3>;
+                samsung,dw-mshc-ddr-timing = <1 2>;
                slot@0 {
                        reg = <0>;
diff --git a/arch/arm/boot/dts/dbx5x0.dtsi b/arch/arm/boot/dts/dbx5x0.dtsi
index 2efd9c891bc9..63f2fbcfe819 100644
--- a/arch/arm/boot/dts/dbx5x0.dtsi
+++ b/arch/arm/boot/dts/dbx5x0.dtsi
@@ -170,7 +170,9 @@
                        gpio-bank = <8>;
                };
-                pinctrl {
+                pinctrl@80157000 {
+                        // This is actually the PRCMU base address
+                        reg = <0x80157000 0x2000>;
                        compatible = "stericsson,nmk_pinctrl";
                };
diff --git a/arch/arm/boot/dts/dove-cubox.dts b/arch/arm/boot/dts/dove-cubox.dts
index fed7d3f9f431..cdee96fca6e2 100644
--- a/arch/arm/boot/dts/dove-cubox.dts
+++ b/arch/arm/boot/dts/dove-cubox.dts
@@ -26,10 +26,15 @@
 };
 &uart0 { status = "okay"; };
-&sdio0 { status = "okay"; };
 &sata0 { status = "okay"; };
 &i2c0 { status = "okay"; };
+&sdio0 {
+        status = "okay";
+        /* sdio0 card detect is connected to wrong pin on CuBox */
+        cd-gpios = <&gpio0 12 1>;
+};
 &spi0 {
        status = "okay";
@@ -42,9 +47,14 @@
 };
 &pinctrl {
-        pinctrl-0 = <&pmx_gpio_18>;
+        pinctrl-0 = <&pmx_gpio_12 &pmx_gpio_18>;
        pinctrl-names = "default";
+        pmx_gpio_12: pmx-gpio-12 {
+                marvell,pins = "mpp12";
+                marvell,function = "gpio";
+        };
        pmx_gpio_18: pmx-gpio-18 {
                marvell,pins = "mpp18";
                marvell,function = "gpio";
diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi
index f3f7e9d8adca..740630f9cd65 100644
--- a/arch/arm/boot/dts/dove.dtsi
+++ b/arch/arm/boot/dts/dove.dtsi
@@ -93,6 +93,7 @@
                        reg = <0xd0400 0x20>;
                        ngpios = <32>;
                        interrupt-controller;
+                        #interrupt-cells = <2>;
                        interrupts = <12>, <13>, <14>, <60>;
                };
@@ -103,6 +104,7 @@
                        reg = <0xd0420 0x20>;
                        ngpios = <32>;
                        interrupt-controller;
+                        #interrupt-cells = <2>;
                        interrupts = <61>;
                };
@@ -117,6 +119,7 @@
                pinctrl: pinctrl@d0200 {
                        compatible = "marvell,dove-pinctrl";
                        reg = <0xd0200 0x10>;
+                        clocks = <&gate_clk 22>;
                };
                spi0: spi@10600 {
diff --git a/arch/arm/boot/dts/ecx-2000.dts b/arch/arm/boot/dts/ecx-2000.dts
index 46477ac1de99..139b40cc3a23 100644
--- a/arch/arm/boot/dts/ecx-2000.dts
+++ b/arch/arm/boot/dts/ecx-2000.dts
@@ -32,6 +32,7 @@
                cpu@0 {
                        compatible = "arm,cortex-a15";
+                        device_type = "cpu";
                        reg = <0>;
                        clocks = <&a9pll>;
                        clock-names = "cpu";
@@ -39,6 +40,7 @@
                cpu@1 {
                        compatible = "arm,cortex-a15";
+                        device_type = "cpu";
                        reg = <1>;
                        clocks = <&a9pll>;
                        clock-names = "cpu";
@@ -46,6 +48,7 @@
                cpu@2 {
                        compatible = "arm,cortex-a15";
+                        device_type = "cpu";
                        reg = <2>;
                        clocks = <&a9pll>;
                        clock-names = "cpu";
@@ -53,6 +56,7 @@
                cpu@3 {
                        compatible = "arm,cortex-a15";
+                        device_type = "cpu";
                        reg = <3>;
                        clocks = <&a9pll>;
                        clock-names = "cpu";
diff --git a/arch/arm/boot/dts/exynos4210-smdkv310.dts b/arch/arm/boot/dts/exynos4210-smdkv310.dts
index 9b23a8255e39..f63490707f3a 100644
--- a/arch/arm/boot/dts/exynos4210-smdkv310.dts
+++ b/arch/arm/boot/dts/exynos4210-smdkv310.dts
@@ -26,7 +26,7 @@
        };
        chosen {
-                bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC2,115200 init=/linuxrc";
+                bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC1,115200 init=/linuxrc";
        };
        sdhci@12530000 {
diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts
index 942d5761ca97..e05b18f3c33d 100644
--- a/arch/arm/boot/dts/exynos5250-smdk5250.dts
+++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts
@@ -115,8 +115,8 @@
                fifo-depth = <0x80>;
                card-detect-delay = <200>;
                samsung,dw-mshc-ciu-div = <3>;
-                samsung,dw-mshc-sdr-timing = <2 3 3>;
+                samsung,dw-mshc-sdr-timing = <2 3>;
-                samsung,dw-mshc-ddr-timing = <1 2 3>;
+                samsung,dw-mshc-ddr-timing = <1 2>;
                slot@0 {
                        reg = <0>;
@@ -139,8 +139,8 @@
                fifo-depth = <0x80>;
                card-detect-delay = <200>;
                samsung,dw-mshc-ciu-div = <3>;
-                samsung,dw-mshc-sdr-timing = <2 3 3>;
+                samsung,dw-mshc-sdr-timing = <2 3>;
-                samsung,dw-mshc-ddr-timing = <1 2 3>;
+                samsung,dw-mshc-ddr-timing = <1 2>;
                slot@0 {
                        reg = <0>;
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index 2e3b6efaf1a2..3acf594ea60b 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -574,7 +574,7 @@
        hdmi {
                compatible = "samsung,exynos5-hdmi";
-                reg = <0x14530000 0x100000>;
+                reg = <0x14530000 0x70000>;
                interrupts = <0 95 0>;
        };
diff --git a/arch/arm/boot/dts/exynos5440-ssdk5440.dts b/arch/arm/boot/dts/exynos5440-ssdk5440.dts
index 921c83cf694f..81e2c964a900 100644
--- a/arch/arm/boot/dts/exynos5440-ssdk5440.dts
+++ b/arch/arm/boot/dts/exynos5440-ssdk5440.dts
@@ -21,7 +21,7 @@
        };
        chosen {
-                bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x81000000,8M console=ttySAC2,115200 init=/linuxrc";
+                bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x81000000,8M console=ttySAC0,115200 init=/linuxrc";
        };
        spi {
diff --git a/arch/arm/boot/dts/highbank.dts b/arch/arm/boot/dts/highbank.dts
index a9ae5d32e80d..5927a8df5625 100644
--- a/arch/arm/boot/dts/highbank.dts
+++ b/arch/arm/boot/dts/highbank.dts
@@ -30,33 +30,37 @@
                #address-cells = <1>;
                #size-cells = <0>;
-                cpu@0 {
+                cpu@900 {
                        compatible = "arm,cortex-a9";
-                        reg = <0>;
+                        device_type = "cpu";
+                        reg = <0x900>;
                        next-level-cache = <&L2>;
                        clocks = <&a9pll>;
                        clock-names = "cpu";
                };
-                cpu@1 {
+                cpu@901 {
                        compatible = "arm,cortex-a9";
-                        reg = <1>;
+                        device_type = "cpu";
+                        reg = <0x901>;
                        next-level-cache = <&L2>;
                        clocks = <&a9pll>;
                        clock-names = "cpu";
                };
-                cpu@2 {
+                cpu@902 {
                        compatible = "arm,cortex-a9";
-                        reg = <2>;
+                        device_type = "cpu";
+                        reg = <0x902>;
                        next-level-cache = <&L2>;
                        clocks = <&a9pll>;
                        clock-names = "cpu";
                };
-                cpu@3 {
+                cpu@903 {
                        compatible = "arm,cortex-a9";
-                        reg = <3>;
+                        device_type = "cpu";
+                        reg = <0x903>;
                        next-level-cache = <&L2>;
                        clocks = <&a9pll>;
                        clock-names = "cpu";
diff --git a/arch/arm/boot/dts/imx23-olinuxino.dts b/arch/arm/boot/dts/imx23-olinuxino.dts
index 7c43b8e70b9f..e7484e4ea659 100644
--- a/arch/arm/boot/dts/imx23-olinuxino.dts
+++ b/arch/arm/boot/dts/imx23-olinuxino.dts
@@ -39,17 +39,17 @@
                                hog_pins_a: hog@0 {
                                        reg = <0>;
                                        fsl,pinmux-ids = <
-                                                0x2013 /* MX23_PAD_SSP1_DETECT__GPIO_2_1 */
+                                                0x0113 /* MX23_PAD_GPMI_ALE__GPIO_0_17 */
                                        >;
                                        fsl,drive-strength = <0>;
                                        fsl,voltage = <1>;
                                        fsl,pull-up = <0>;
                                };
-                                led_pin_gpio0_17: led_gpio0_17@0 {
+                                led_pin_gpio2_1: led_gpio2_1@0 {
                                        reg = <0>;
                                        fsl,pinmux-ids = <
-                                                0x0113 /* MX23_PAD_GPMI_ALE__GPIO_0_17 */
+                                                0x2013 /* MX23_PAD_SSP1_DETECT__GPIO_2_1 */
                                        >;
                                        fsl,drive-strength = <0>;
                                        fsl,voltage = <1>;
@@ -110,7 +110,7 @@
        leds {
                compatible = "gpio-leds";
                pinctrl-names = "default";
-                pinctrl-0 = <&led_pin_gpio0_17>;
+                pinctrl-0 = <&led_pin_gpio2_1>;
                user {
                        label = "green";
diff --git a/arch/arm/boot/dts/imx31-bug.dts b/arch/arm/boot/dts/imx31-bug.dts
index 24731cb78e8e..7f67402328d3 100644
--- a/arch/arm/boot/dts/imx31-bug.dts
+++ b/arch/arm/boot/dts/imx31-bug.dts
@@ -14,7 +14,7 @@
 / {
        model = "Buglabs i.MX31 Bug 1.x";
-        compatible = "fsl,imx31-bug", "fsl,imx31";
+        compatible = "buglabs,imx31-bug", "fsl,imx31";
        memory {
                reg = <0x80000000 0x8000000>; /* 128M */
diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi
index 552aed4ff982..edc3f1eb6699 100644
--- a/arch/arm/boot/dts/imx53.dtsi
+++ b/arch/arm/boot/dts/imx53.dtsi
@@ -492,7 +492,7 @@
                                compatible = "fsl,imx53-flexcan", "fsl,p1010-flexcan";
                                reg = <0x53fcc000 0x4000>;
                                interrupts = <83>;
-                                clocks = <&clks 158>, <&clks 157>;
+                                clocks = <&clks 87>, <&clks 86>;
                                clock-names = "ipg", "per";
                                status = "disabled";
                        };
diff --git a/arch/arm/boot/dts/kirkwood-6282.dtsi b/arch/arm/boot/dts/kirkwood-6282.dtsi
index 9ae2004d5675..4ccea2130a6c 100644
--- a/arch/arm/boot/dts/kirkwood-6282.dtsi
+++ b/arch/arm/boot/dts/kirkwood-6282.dtsi
@@ -39,6 +39,7 @@
                        #size-cells = <0>;
                        interrupts = <32>;
                        clock-frequency = <100000>;
+                        clocks = <&gate_clk 7>;
                        status = "disabled";
                };
        };
diff --git a/arch/arm/boot/dts/kirkwood-ns2-common.dtsi b/arch/arm/boot/dts/kirkwood-ns2-common.dtsi
index 9bc6785ad228..77d21abfcdf7 100644
--- a/arch/arm/boot/dts/kirkwood-ns2-common.dtsi
+++ b/arch/arm/boot/dts/kirkwood-ns2-common.dtsi
@@ -1,4 +1,5 @@
 /include/ "kirkwood.dtsi"
+/include/ "kirkwood-6281.dtsi"
 / {
        chosen {
@@ -6,6 +7,21 @@
        };
        ocp@f1000000 {
+                pinctrl: pinctrl@10000 {
+                        pinctrl-0 = < &pmx_spi &pmx_twsi0 &pmx_uart0
+                                        &pmx_ns2_sata0 &pmx_ns2_sata1>;
+                        pinctrl-names = "default";
+                        pmx_ns2_sata0: pmx-ns2-sata0 {
+                                marvell,pins = "mpp21";
+                                marvell,function = "sata0";
+                        };
+                        pmx_ns2_sata1: pmx-ns2-sata1 {
+                                marvell,pins = "mpp20";
+                                marvell,function = "sata1";
+                        };
+                };
                serial@12000 {
                        clock-frequency = <166666667>;
                        status = "okay";
diff --git a/arch/arm/boot/dts/kirkwood-topkick.dts b/arch/arm/boot/dts/kirkwood-topkick.dts
index c0de5a7f660d..cd15452a52a6 100644
--- a/arch/arm/boot/dts/kirkwood-topkick.dts
+++ b/arch/arm/boot/dts/kirkwood-topkick.dts
@@ -82,4 +82,21 @@
                        gpios = <&gpio1 16 1>;
                };
        };
+        regulators {
+                compatible = "simple-bus";
+                #address-cells = <1>;
+                #size-cells = <0>;
+                sata0_power: regulator@1 {
+                        compatible = "regulator-fixed";
+                        reg = <1>;
+                        regulator-name = "SATA0 Power";
+                        regulator-min-microvolt = <5000000>;
+                        regulator-max-microvolt = <5000000>;
+                        enable-active-high;
+                        regulator-always-on;
+                        regulator-boot-on;
+                        gpio = <&gpio1 4 0>;
+                };
+        };
 };
diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi
index 7735cee4a9c6..d6ab442b7011 100644
--- a/arch/arm/boot/dts/kirkwood.dtsi
+++ b/arch/arm/boot/dts/kirkwood.dtsi
@@ -36,6 +36,7 @@
                        reg = <0x10100 0x40>;
                        ngpios = <32>;
                        interrupt-controller;
+                        #interrupt-cells = <2>;
                        interrupts = <35>, <36>, <37>, <38>;
                };
@@ -46,6 +47,7 @@
                        reg = <0x10140 0x40>;
                        ngpios = <18>;
                        interrupt-controller;
+                        #interrupt-cells = <2>;
                        interrupts = <39>, <40>, <41>;
                };
@@ -144,6 +146,7 @@
                        compatible = "marvell,orion-ehci";
                        reg = <0x50000 0x1000>;
                        interrupts = <19>;
+                        clocks = <&gate_clk 3>;
                        status = "okay";
                };
diff --git a/arch/arm/boot/dts/kizbox.dts b/arch/arm/boot/dts/kizbox.dts
index e8814fe0e277..b4dc3ed9a3ec 100644
--- a/arch/arm/boot/dts/kizbox.dts
+++ b/arch/arm/boot/dts/kizbox.dts
@@ -48,6 +48,8 @@
                        macb0: ethernet@fffc4000 {
                                phy-mode = "mii";
+                                pinctrl-0 = <&pinctrl_macb_rmii
+                                             &pinctrl_macb_rmii_mii_alt>;
                                status = "okay";
                        };
diff --git a/arch/arm/boot/dts/sunxi.dtsi b/arch/arm/boot/dts/sunxi.dtsi
index 8bbc2bfef221..8b36abea9f2e 100644
--- a/arch/arm/boot/dts/sunxi.dtsi
+++ b/arch/arm/boot/dts/sunxi.dtsi
@@ -60,19 +60,21 @@
                };
                uart0: uart@01c28000 {
-                        compatible = "ns8250";
+                        compatible = "snps,dw-apb-uart";
                        reg = <0x01c28000 0x400>;
                        interrupts = <1>;
                        reg-shift = <2>;
+                        reg-io-width = <4>;
                        clock-frequency = <24000000>;
                        status = "disabled";
                };
                uart1: uart@01c28400 {
-                        compatible = "ns8250";
+                        compatible = "snps,dw-apb-uart";
                        reg = <0x01c28400 0x400>;
                        interrupts = <2>;
                        reg-shift = <2>;
+                        reg-io-width = <4>;
                        clock-frequency = <24000000>;
                        status = "disabled";
                };
diff --git a/arch/arm/boot/dts/twl4030.dtsi b/arch/arm/boot/dts/twl4030.dtsi
index 63411b036932..ed0bc9546837 100644
--- a/arch/arm/boot/dts/twl4030.dtsi
+++ b/arch/arm/boot/dts/twl4030.dtsi
@@ -19,6 +19,10 @@
                interrupts = <11>;
        };
+        watchdog {
+                compatible = "ti,twl4030-wdt";
+        };
        vdac: regulator-vdac {
                compatible = "ti,twl4030-vdac";
                regulator-min-microvolt = <1800000>;
diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
index 1fc405a9ecfb..cf8071ad22d5 100644
--- a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
+++ b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
@@ -45,7 +45,6 @@
                        reg = <1>;
                };
-/* A7s disabled till big.LITTLE patches are available...
                cpu2: cpu@2 {
                        device_type = "cpu";
                        compatible = "arm,cortex-a7";
@@ -63,7 +62,6 @@
                        compatible = "arm,cortex-a7";
                        reg = <0x102>;
                };
-*/
        };
        memory@80000000 {
diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c
index 9173d112ea01..e57d7e5bf96a 100644
--- a/arch/arm/common/sa1111.c
+++ b/arch/arm/common/sa1111.c
@@ -686,8 +686,7 @@ sa1111_init_one_child(struct sa1111 *sachip, struct resource *parent,
 *      %-EINVAL        no platform data passed
 *      %0              successful.
 */
-static int __devinit
+static int __sa1111_probe(struct device *me, struct resource *mem, int irq)
-__sa1111_probe(struct device *me, struct resource *mem, int irq)
 {
        struct sa1111_platform_data *pd = me->platform_data;
        struct sa1111 *sachip;
@@ -1011,7 +1010,7 @@ static int sa1111_resume(struct platform_device *dev)
 #define sa1111_resume  NULL
 #endif
-static int __devinit sa1111_probe(struct platform_device *pdev)
+static int sa1111_probe(struct platform_device *pdev)
 {
        struct resource *mem;
        int irq;
diff --git a/arch/arm/common/scoop.c b/arch/arm/common/scoop.c
index 0c616d5fcb0f..a5c3dc38aa18 100644
--- a/arch/arm/common/scoop.c
+++ b/arch/arm/common/scoop.c
@@ -176,7 +176,7 @@ static int scoop_resume(struct platform_device *dev)
 #define scoop_resume    NULL
 #endif
-static int __devinit scoop_probe(struct platform_device *pdev)
+static int scoop_probe(struct platform_device *pdev)
 {
        struct scoop_dev *devptr;
        struct scoop_config *inf;
@@ -243,7 +243,7 @@ err_ioremap:
        return ret;
 }
-static int __devexit scoop_remove(struct platform_device *pdev)
+static int scoop_remove(struct platform_device *pdev)
 {
        struct scoop_dev *sdev = platform_get_drvdata(pdev);
        int ret;
@@ -268,7 +268,7 @@ static int __devexit scoop_remove(struct platform_device *pdev)
 static struct platform_driver scoop_driver = {
        .probe          = scoop_probe,
-        .remove         = __devexit_p(scoop_remove),
+        .remove         = scoop_remove,
        .suspend        = scoop_suspend,
        .resume         = scoop_resume,
        .driver         = {
diff --git a/arch/arm/common/vic.c b/arch/arm/common/vic.c
index e4df17ca90c7..8f324b99416e 100644
--- a/arch/arm/common/vic.c
+++ b/arch/arm/common/vic.c
@@ -206,6 +206,7 @@ static void __init vic_register(void __iomem *base, unsigned int irq,
                                struct device_node *node)
 {
        struct vic_device *v;
+        int i;
        if (vic_id >= ARRAY_SIZE(vic_devices)) {
                printk(KERN_ERR "%s: too few VICs, increase CONFIG_ARM_VIC_NR\n", __func__);
@@ -220,6 +221,10 @@ static void __init vic_register(void __iomem *base, unsigned int irq,
        vic_id++;
        v->domain = irq_domain_add_simple(node, fls(valid_sources), irq,
                                          &vic_irqdomain_ops, v);
+        /* create an IRQ mapping for each valid IRQ */
+        for (i = 0; i < fls(valid_sources); i++)
+                if (valid_sources & (1 << i))
+                        irq_create_mapping(v->domain, i);
 }
 static void vic_ack_irq(struct irq_data *d)
@@ -416,9 +421,9 @@ int __init vic_of_init(struct device_node *node, struct device_node *parent)
                return -EIO;
        /*
-         * Passing -1 as first IRQ makes the simple domain allocate descriptors
+         * Passing 0 as first IRQ makes the simple domain allocate descriptors
         */
-        __vic_init(regs, -1, ~0, ~0, node);
+        __vic_init(regs, 0, ~0, ~0, node);
        return 0;
 }
diff --git a/arch/arm/configs/at91_dt_defconfig b/arch/arm/configs/at91_dt_defconfig
index b175577d7abb..1ea959019fcd 100644
--- a/arch/arm/configs/at91_dt_defconfig
+++ b/arch/arm/configs/at91_dt_defconfig
@@ -19,6 +19,7 @@ CONFIG_SOC_AT91SAM9260=y
 CONFIG_SOC_AT91SAM9263=y
 CONFIG_SOC_AT91SAM9G45=y
 CONFIG_SOC_AT91SAM9X5=y
+CONFIG_SOC_AT91SAM9N12=y
 CONFIG_MACH_AT91SAM_DT=y
 CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
 CONFIG_AT91_TIMER_HZ=128
@@ -31,7 +32,7 @@ CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_ARM_APPENDED_DTB=y
 CONFIG_ARM_ATAG_DTB_COMPAT=y
-CONFIG_CMDLINE="mem=128M console=ttyS0,115200 initrd=0x21100000,25165824 root=/dev/ram0 rw"
+CONFIG_CMDLINE="console=ttyS0,115200 initrd=0x21100000,25165824 root=/dev/ram0 rw"
 CONFIG_KEXEC=y
 CONFIG_AUTO_ZRELADDR=y
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
diff --git a/arch/arm/configs/kirkwood_defconfig b/arch/arm/configs/kirkwood_defconfig
index 93f3794ba5cb..13482ea58b09 100644
--- a/arch/arm/configs/kirkwood_defconfig
+++ b/arch/arm/configs/kirkwood_defconfig
@@ -56,6 +56,7 @@ CONFIG_AEABI=y
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_KIRKWOOD=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index dbea6f4efe9f..2eeff1e64b6e 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -6,6 +6,7 @@ CONFIG_MACH_ARMADA_370=y
 CONFIG_MACH_ARMADA_XP=y
 CONFIG_ARCH_HIGHBANK=y
 CONFIG_ARCH_SOCFPGA=y
+CONFIG_ARCH_SUNXI=y
 # CONFIG_ARCH_VEXPRESS_CORTEX_A5_A9_ERRATA is not set
 CONFIG_ARM_ERRATA_754322=y
 CONFIG_SMP=y
diff --git a/arch/arm/configs/mvebu_defconfig b/arch/arm/configs/mvebu_defconfig
index a702fb345c01..cbd91bce1ca9 100644
--- a/arch/arm/configs/mvebu_defconfig
+++ b/arch/arm/configs/mvebu_defconfig
@@ -33,9 +33,9 @@ CONFIG_MVNETA=y
 CONFIG_MARVELL_PHY=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_OF_PLATFORM=y
 CONFIG_I2C=y
 CONFIG_I2C_MV64XXX=y
+CONFIG_SERIAL_8250_DW=y
 CONFIG_GPIOLIB=y
 CONFIG_GPIO_SYSFS=y
 # CONFIG_USB_SUPPORT is not set
diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
index a1dc5c071e71..82ce8d738fa1 100644
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -65,6 +65,8 @@ CONFIG_MAC80211_RC_PID=y
 CONFIG_MAC80211_RC_DEFAULT_PID=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_CONNECTOR=y
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_MTD=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_CHAR=y
@@ -132,9 +134,11 @@ CONFIG_POWER_SUPPLY=y
 CONFIG_WATCHDOG=y
 CONFIG_OMAP_WATCHDOG=y
 CONFIG_TWL4030_WATCHDOG=y
+CONFIG_MFD_TPS65217=y
 CONFIG_REGULATOR_TWL4030=y
 CONFIG_REGULATOR_TPS65023=y
 CONFIG_REGULATOR_TPS6507X=y
+CONFIG_REGULATOR_TPS65217=y
 CONFIG_FB=y
 CONFIG_FIRMWARE_EDID=y
 CONFIG_FB_MODE_HELPERS=y
@@ -170,6 +174,7 @@ CONFIG_SND_DEBUG=y
 CONFIG_SND_USB_AUDIO=m
 CONFIG_SND_SOC=m
 CONFIG_SND_OMAP_SOC=m
+CONFIG_SND_OMAP_SOC_OMAP_TWL4030=m
 CONFIG_SND_OMAP_SOC_OMAP3_PANDORA=m
 CONFIG_USB=y
 CONFIG_USB_DEBUG=y
diff --git a/arch/arm/kernel/bios32.c b/arch/arm/kernel/bios32.c
index 9b722612553d..379cf3292390 100644
--- a/arch/arm/kernel/bios32.c
+++ b/arch/arm/kernel/bios32.c
@@ -78,7 +78,7 @@ void pcibios_report_status(u_int status_mask, int warn)
 * Bug 3 is responsible for the sound DMA grinding to a halt.  We now
 * live with bug 2.
 */
-static void __devinit pci_fixup_83c553(struct pci_dev *dev)
+static void pci_fixup_83c553(struct pci_dev *dev)
 {
        /*
         * Set memory region to start at address 0, and enable IO
@@ -130,7 +130,7 @@ static void __devinit pci_fixup_83c553(struct pci_dev *dev)
 }
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_WINBOND, PCI_DEVICE_ID_WINBOND_83C553, pci_fixup_83c553);
-static void __devinit pci_fixup_unassign(struct pci_dev *dev)
+static void pci_fixup_unassign(struct pci_dev *dev)
 {
        dev->resource[0].end -= dev->resource[0].start;
        dev->resource[0].start = 0;
@@ -142,7 +142,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_WINBOND2, PCI_DEVICE_ID_WINBOND2_89C940F,
 * if it is the host bridge by marking it as such.  These resources are of
 * no consequence to the PCI layer (they are handled elsewhere).
 */
-static void __devinit pci_fixup_dec21285(struct pci_dev *dev)
+static void pci_fixup_dec21285(struct pci_dev *dev)
 {
        int i;
@@ -161,7 +161,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_DEC, PCI_DEVICE_ID_DEC_21285, pci_fixup_d
 /*
 * PCI IDE controllers use non-standard I/O port decoding, respect it.
 */
-static void __devinit pci_fixup_ide_bases(struct pci_dev *dev)
+static void pci_fixup_ide_bases(struct pci_dev *dev)
 {
        struct resource *r;
        int i;
@@ -182,7 +182,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pci_fixup_ide_bases);
 /*
 * Put the DEC21142 to sleep
 */
-static void __devinit pci_fixup_dec21142(struct pci_dev *dev)
+static void pci_fixup_dec21142(struct pci_dev *dev)
 {
        pci_write_config_dword(dev, 0x40, 0x80000000);
 }
@@ -204,7 +204,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_DEC, PCI_DEVICE_ID_DEC_21142, pci_fixup_d
 * functional.  However, The CY82C693U _does not work_ in bus
 * master mode without locking the PCI bus solid.
 */
-static void __devinit pci_fixup_cy82c693(struct pci_dev *dev)
+static void pci_fixup_cy82c693(struct pci_dev *dev)
 {
        if ((dev->class >> 8) == PCI_CLASS_STORAGE_IDE) {
                u32 base0, base1;
@@ -254,7 +254,7 @@ static void __devinit pci_fixup_cy82c693(struct pci_dev *dev)
 }
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_CONTAQ, PCI_DEVICE_ID_CONTAQ_82C693, pci_fixup_cy82c693);
-static void __devinit pci_fixup_it8152(struct pci_dev *dev)
+static void pci_fixup_it8152(struct pci_dev *dev)
 {
        int i;
        /* fixup for ITE 8152 devices */
@@ -361,9 +361,7 @@ void pcibios_fixup_bus(struct pci_bus *bus)
        printk(KERN_INFO "PCI: bus%d: Fast back to back transfers %sabled\n",
                bus->number, (features & PCI_COMMAND_FAST_BACK) ? "en" : "dis");
 }
-#ifdef CONFIG_HOTPLUG
 EXPORT_SYMBOL(pcibios_fixup_bus);
-#endif
 /*
 * Swizzle the device pin each time we cross a bridge.  If a platform does
@@ -380,7 +378,7 @@ EXPORT_SYMBOL(pcibios_fixup_bus);
 * PCI standard swizzle is implemented on plug-in cards and Cardbus based
 * PCI extenders, so it can not be ignored.
 */
-static u8 __devinit pcibios_swizzle(struct pci_dev *dev, u8 *pin)
+static u8 pcibios_swizzle(struct pci_dev *dev, u8 *pin)
 {
        struct pci_sys_data *sys = dev->sysdata;
        int slot, oldpin = *pin;
diff --git a/arch/arm/kernel/debug.S b/arch/arm/kernel/debug.S
index 6809200c31fb..14f7c3b14632 100644
--- a/arch/arm/kernel/debug.S
+++ b/arch/arm/kernel/debug.S
@@ -100,12 +100,14 @@ ENTRY(printch)
                b       1b
 ENDPROC(printch)
+#ifdef CONFIG_MMU
 ENTRY(debug_ll_addr)
                addruart r2, r3, ip
                str     r2, [r0]
                str     r3, [r1]
                mov     pc, lr
 ENDPROC(debug_ll_addr)
+#endif
 #else
diff --git a/arch/arm/kernel/etm.c b/arch/arm/kernel/etm.c
index 36d20bd50120..9b6de8c988f3 100644
--- a/arch/arm/kernel/etm.c
+++ b/arch/arm/kernel/etm.c
@@ -339,7 +339,7 @@ static struct miscdevice etb_miscdev = {
        .fops = &etb_fops,
 };
-static int __devinit etb_probe(struct amba_device *dev, const struct amba_id *id)
+static int etb_probe(struct amba_device *dev, const struct amba_id *id)
 {
        struct tracectx *t = &tracer;
        int ret = 0;
@@ -531,7 +531,7 @@ static ssize_t trace_mode_store(struct kobject *kobj,
 static struct kobj_attribute trace_mode_attr =
        __ATTR(trace_mode, 0644, trace_mode_show, trace_mode_store);
-static int __devinit etm_probe(struct amba_device *dev, const struct amba_id *id)
+static int etm_probe(struct amba_device *dev, const struct amba_id *id)
 {
        struct tracectx *t = &tracer;
        int ret = 0;
diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S
index 4eee351f4668..486a15ae9011 100644
--- a/arch/arm/kernel/head.S
+++ b/arch/arm/kernel/head.S
@@ -246,6 +246,7 @@ __create_page_tables:
        /*
         * Then map boot params address in r2 if specified.
+         * We map 2 sections in case the ATAGs/DTB crosses a section boundary.
         */
        mov     r0, r2, lsr #SECTION_SHIFT
        movs    r0, r0, lsl #SECTION_SHIFT
@@ -253,6 +254,8 @@ __create_page_tables:
        addne   r3, r3, #PAGE_OFFSET
        addne   r3, r4, r3, lsr #(SECTION_SHIFT - PMD_ORDER)
        orrne   r6, r7, r0
+        strne   r6, [r3], #1 << PMD_ORDER
+        addne   r6, r6, #1 << SECTION_SHIFT
        strne   r6, [r3]
 #ifdef CONFIG_DEBUG_LL
@@ -331,7 +334,7 @@ ENTRY(secondary_startup)
         * as it has already been validated by the primary processor.
         */
 #ifdef CONFIG_ARM_VIRT_EXT
-        bl      __hyp_stub_install
+        bl      __hyp_stub_install_secondary
 #endif
        safe_svcmode_maskall r9
diff --git a/arch/arm/kernel/hyp-stub.S b/arch/arm/kernel/hyp-stub.S
index 65b2417aebce..1315c4ccfa56 100644
--- a/arch/arm/kernel/hyp-stub.S
+++ b/arch/arm/kernel/hyp-stub.S
@@ -99,7 +99,7 @@ ENTRY(__hyp_stub_install_secondary)
         * immediately.
         */
        compare_cpu_mode_with_primary   r4, r5, r6, r7
-        bxne    lr
+        movne   pc, lr
        /*
         * Once we have given up on one CPU, we do not try to install the
@@ -111,7 +111,7 @@ ENTRY(__hyp_stub_install_secondary)
         */
        cmp     r4, #HYP_MODE
-        bxne    lr                      @ give up if the CPU is not in HYP mode
+        movne   pc, lr                  @ give up if the CPU is not in HYP mode
 /*
 * Configure HSCTLR to set correct exception endianness/instruction set
@@ -120,7 +120,8 @@ ENTRY(__hyp_stub_install_secondary)
 * Eventually, CPU-specific code might be needed -- assume not for now
 *
 * This code relies on the "eret" instruction to synchronize the
- * various coprocessor accesses.
+ * various coprocessor accesses. This is done when we switch to SVC
+ * (see safe_svcmode_maskall).
 */
        @ Now install the hypervisor stub:
        adr     r7, __hyp_stub_vectors
@@ -155,14 +156,7 @@ THUMB(	orr	r7, #(1 << 30)	)	@ HSCTLR.TE
 1:
 #endif
-        bic     r7, r4, #MODE_MASK
+        bx      lr                      @ The boot CPU mode is left in r4.
-        orr     r7, r7, #SVC_MODE
-THUMB(  orr     r7, r7, #PSR_T_BIT      )
-        msr     spsr_cxsf, r7           @ This is SPSR_hyp.
-        __MSR_ELR_HYP(14)               @ msr elr_hyp, lr
-        __ERET                          @ return, switching to SVC mode
-                                        @ The boot CPU mode is left in r4.
 ENDPROC(__hyp_stub_install_secondary)
 __hyp_stub_do_trap:
@@ -200,7 +194,7 @@ ENDPROC(__hyp_get_vectors)
        @ fall through
 ENTRY(__hyp_set_vectors)
        __HVC(0)
-        bx      lr
+        mov     pc, lr
 ENDPROC(__hyp_set_vectors)
 #ifndef ZIMAGE
diff --git a/arch/arm/kernel/perf_event_cpu.c b/arch/arm/kernel/perf_event_cpu.c
index 9a4f6307a016..5f6620684e25 100644
--- a/arch/arm/kernel/perf_event_cpu.c
+++ b/arch/arm/kernel/perf_event_cpu.c
@@ -132,7 +132,7 @@ static int cpu_pmu_request_irq(struct arm_pmu *cpu_pmu, irq_handler_t handler)
        return 0;
 }
-static void __devinit cpu_pmu_init(struct arm_pmu *cpu_pmu)
+static void cpu_pmu_init(struct arm_pmu *cpu_pmu)
 {
        int cpu;
        for_each_possible_cpu(cpu) {
@@ -178,7 +178,7 @@ static struct notifier_block __cpuinitdata cpu_pmu_hotplug_notifier = {
 /*
 * PMU platform driver and devicetree bindings.
 */
-static struct of_device_id __devinitdata cpu_pmu_of_device_ids[] = {
+static struct of_device_id cpu_pmu_of_device_ids[] = {
        {.compatible = "arm,cortex-a15-pmu",    .data = armv7_a15_pmu_init},
        {.compatible = "arm,cortex-a9-pmu",     .data = armv7_a9_pmu_init},
        {.compatible = "arm,cortex-a8-pmu",     .data = armv7_a8_pmu_init},
@@ -190,7 +190,7 @@ static struct of_device_id __devinitdata cpu_pmu_of_device_ids[] = {
        {},
 };
-static struct platform_device_id __devinitdata cpu_pmu_plat_device_ids[] = {
+static struct platform_device_id cpu_pmu_plat_device_ids[] = {
        {.name = "arm-pmu"},
        {},
 };
@@ -198,7 +198,7 @@ static struct platform_device_id __devinitdata cpu_pmu_plat_device_ids[] = {
 /*
 * CPU PMU identification and probing.
 */
-static int __devinit probe_current_pmu(struct arm_pmu *pmu)
+static int probe_current_pmu(struct arm_pmu *pmu)
 {
        int cpu = get_cpu();
        unsigned long cpuid = read_cpuid_id();
@@ -252,7 +252,7 @@ static int __devinit probe_current_pmu(struct arm_pmu *pmu)
        return ret;
 }
-static int __devinit cpu_pmu_device_probe(struct platform_device *pdev)
+static int cpu_pmu_device_probe(struct platform_device *pdev)
 {
        const struct of_device_id *of_id;
        int (*init_fn)(struct arm_pmu *);
diff --git a/arch/arm/kernel/perf_event_v6.c b/arch/arm/kernel/perf_event_v6.c
index f3e22ff8b6a2..041d0526a288 100644
--- a/arch/arm/kernel/perf_event_v6.c
+++ b/arch/arm/kernel/perf_event_v6.c
@@ -653,7 +653,7 @@ static int armv6_map_event(struct perf_event *event)
                                &armv6_perf_cache_map, 0xFF);
 }
-static int __devinit armv6pmu_init(struct arm_pmu *cpu_pmu)
+static int armv6pmu_init(struct arm_pmu *cpu_pmu)
 {
        cpu_pmu->name           = "v6";
        cpu_pmu->handle_irq     = armv6pmu_handle_irq;
@@ -685,7 +685,7 @@ static int armv6mpcore_map_event(struct perf_event *event)
                                &armv6mpcore_perf_cache_map, 0xFF);
 }
-static int __devinit armv6mpcore_pmu_init(struct arm_pmu *cpu_pmu)
+static int armv6mpcore_pmu_init(struct arm_pmu *cpu_pmu)
 {
        cpu_pmu->name           = "v6mpcore";
        cpu_pmu->handle_irq     = armv6pmu_handle_irq;
diff --git a/arch/arm/kernel/perf_event_v7.c b/arch/arm/kernel/perf_event_v7.c
index 7d0cce85d17e..4fbc757d9cff 100644
--- a/arch/arm/kernel/perf_event_v7.c
+++ b/arch/arm/kernel/perf_event_v7.c
@@ -1226,7 +1226,7 @@ static void armv7pmu_init(struct arm_pmu *cpu_pmu)
        cpu_pmu->max_period     = (1LLU << 32) - 1;
 };
-static u32 __devinit armv7_read_num_pmnc_events(void)
+static u32 armv7_read_num_pmnc_events(void)
 {
        u32 nb_cnt;
@@ -1237,7 +1237,7 @@ static u32 __devinit armv7_read_num_pmnc_events(void)
        return nb_cnt + 1;
 }
-static int __devinit armv7_a8_pmu_init(struct arm_pmu *cpu_pmu)
+static int armv7_a8_pmu_init(struct arm_pmu *cpu_pmu)
 {
        armv7pmu_init(cpu_pmu);
        cpu_pmu->name           = "ARMv7 Cortex-A8";
@@ -1246,7 +1246,7 @@ static int __devinit armv7_a8_pmu_init(struct arm_pmu *cpu_pmu)
        return 0;
 }
-static int __devinit armv7_a9_pmu_init(struct arm_pmu *cpu_pmu)
+static int armv7_a9_pmu_init(struct arm_pmu *cpu_pmu)
 {
        armv7pmu_init(cpu_pmu);
        cpu_pmu->name           = "ARMv7 Cortex-A9";
@@ -1255,7 +1255,7 @@ static int __devinit armv7_a9_pmu_init(struct arm_pmu *cpu_pmu)
        return 0;
 }
-static int __devinit armv7_a5_pmu_init(struct arm_pmu *cpu_pmu)
+static int armv7_a5_pmu_init(struct arm_pmu *cpu_pmu)
 {
        armv7pmu_init(cpu_pmu);
        cpu_pmu->name           = "ARMv7 Cortex-A5";
@@ -1264,7 +1264,7 @@ static int __devinit armv7_a5_pmu_init(struct arm_pmu *cpu_pmu)
        return 0;
 }
-static int __devinit armv7_a15_pmu_init(struct arm_pmu *cpu_pmu)
+static int armv7_a15_pmu_init(struct arm_pmu *cpu_pmu)
 {
        armv7pmu_init(cpu_pmu);
        cpu_pmu->name           = "ARMv7 Cortex-A15";
@@ -1274,7 +1274,7 @@ static int __devinit armv7_a15_pmu_init(struct arm_pmu *cpu_pmu)
        return 0;
 }
-static int __devinit armv7_a7_pmu_init(struct arm_pmu *cpu_pmu)
+static int armv7_a7_pmu_init(struct arm_pmu *cpu_pmu)
 {
        armv7pmu_init(cpu_pmu);
        cpu_pmu->name           = "ARMv7 Cortex-A7";
diff --git a/arch/arm/kernel/perf_event_xscale.c b/arch/arm/kernel/perf_event_xscale.c
index 0c8265e53d5f..2b0fe30ec12e 100644
--- a/arch/arm/kernel/perf_event_xscale.c
+++ b/arch/arm/kernel/perf_event_xscale.c
@@ -440,7 +440,7 @@ static int xscale_map_event(struct perf_event *event)
                                &xscale_perf_cache_map, 0xFF);
 }
-static int __devinit xscale1pmu_init(struct arm_pmu *cpu_pmu)
+static int xscale1pmu_init(struct arm_pmu *cpu_pmu)
 {
        cpu_pmu->name           = "xscale1";
        cpu_pmu->handle_irq     = xscale1pmu_handle_irq;
@@ -810,7 +810,7 @@ static inline void xscale2pmu_write_counter(struct perf_event *event, u32 val)
        }
 }
-static int __devinit xscale2pmu_init(struct arm_pmu *cpu_pmu)
+static int xscale2pmu_init(struct arm_pmu *cpu_pmu)
 {
        cpu_pmu->name           = "xscale2";
        cpu_pmu->handle_irq     = xscale2pmu_handle_irq;
diff --git a/arch/arm/mach-at91/setup.c b/arch/arm/mach-at91/setup.c
index 9ee866ce0478..4b678478cf95 100644
--- a/arch/arm/mach-at91/setup.c
+++ b/arch/arm/mach-at91/setup.c
@@ -105,6 +105,8 @@ static void __init soc_detect(u32 dbgu_base)
        switch (socid) {
        case ARCH_ID_AT91RM9200:
                at91_soc_initdata.type = AT91_SOC_RM9200;
+                if (at91_soc_initdata.subtype == AT91_SOC_SUBTYPE_NONE)
+                        at91_soc_initdata.subtype = AT91_SOC_RM9200_BGA;
                at91_boot_soc = at91rm9200_soc;
                break;
diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c
index a9f2054c3e9b..de7adff324dc 100644
--- a/arch/arm/mach-davinci/board-dm646x-evm.c
+++ b/arch/arm/mach-davinci/board-dm646x-evm.c
@@ -358,7 +358,7 @@ static int cpld_video_probe(struct i2c_client *client,
        return 0;
 }
-static int __devexit cpld_video_remove(struct i2c_client *client)
+static int cpld_video_remove(struct i2c_client *client)
 {
        cpld_client = NULL;
        return 0;
diff --git a/arch/arm/mach-davinci/cdce949.c b/arch/arm/mach-davinci/cdce949.c
index f2232ca6d070..abafb92031c0 100644
--- a/arch/arm/mach-davinci/cdce949.c
+++ b/arch/arm/mach-davinci/cdce949.c
@@ -256,7 +256,7 @@ static int cdce_probe(struct i2c_client *client,
        return 0;
 }
-static int __devexit cdce_remove(struct i2c_client *client)
+static int cdce_remove(struct i2c_client *client)
 {
        cdce_i2c_client = NULL;
        return 0;
@@ -274,7 +274,7 @@ static struct i2c_driver cdce_driver = {
                .name   = "cdce949",
        },
        .probe          = cdce_probe,
-        .remove         = __devexit_p(cdce_remove),
+        .remove         = cdce_remove,
        .id_table       = cdce_id,
 };
diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c
index 0c7911b3e155..ea84c535a110 100644
--- a/arch/arm/mach-dove/common.c
+++ b/arch/arm/mach-dove/common.c
@@ -8,35 +8,24 @@
 * warranty of any kind, whether express or implied.
 */
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/pci.h>
 #include <linux/clk-provider.h>
 #include <linux/clk/mvebu.h>
-#include <linux/ata_platform.h>
+#include <linux/dma-mapping.h>
-#include <linux/gpio.h>
+#include <linux/init.h>
 #include <linux/of.h>
 #include <linux/of_platform.h>
-#include <asm/page.h>
+#include <linux/platform_data/dma-mv_xor.h>
-#include <asm/setup.h>
+#include <linux/platform_data/usb-ehci-orion.h>
-#include <asm/timex.h>
+#include <linux/platform_device.h>
 #include <asm/hardware/cache-tauros2.h>
+#include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
-#include <asm/mach/pci.h>
-#include <mach/dove.h>
-#include <mach/pm.h>
 #include <mach/bridge-regs.h>
-#include <asm/mach/arch.h>
+#include <mach/pm.h>
-#include <linux/irq.h>
-#include <plat/time.h>
-#include <linux/platform_data/usb-ehci-orion.h>
-#include <linux/platform_data/dma-mv_xor.h>
-#include <plat/irq.h>
 #include <plat/common.h>
-#include <plat/addr-map.h>
+#include <plat/irq.h>
+#include <plat/time.h>
 #include "common.h"
 /*****************************************************************************
diff --git a/arch/arm/mach-dove/pcie.c b/arch/arm/mach-dove/pcie.c
index 0ef4435b1657..8a275f297522 100644
--- a/arch/arm/mach-dove/pcie.c
+++ b/arch/arm/mach-dove/pcie.c
@@ -135,7 +135,7 @@ static struct pci_ops pcie_ops = {
        .write = pcie_wr_conf,
 };
-static void __devinit rc_pci_fixup(struct pci_dev *dev)
+static void rc_pci_fixup(struct pci_dev *dev)
 {
        /*
         * Prevent enumeration of root complex.
diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
index 91d5b6f1d5af..e103c290bc9e 100644
--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -74,6 +74,8 @@ config SOC_EXYNOS5440
        depends on ARCH_EXYNOS5
        select ARM_ARCH_TIMER
        select AUTO_ZRELADDR
+        select PINCTRL
+        select PINCTRL_EXYNOS5440
        help
          Enable EXYNOS5440 SoC support
diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c
index d6d0dc651089..1a89824a5f78 100644
--- a/arch/arm/mach-exynos/common.c
+++ b/arch/arm/mach-exynos/common.c
@@ -424,11 +424,18 @@ static void __init exynos5_init_clocks(int xtal)
 {
        printk(KERN_DEBUG "%s: initializing clocks\n", __func__);
+        /* EXYNOS5440 can support only common clock framework */
+        if (soc_is_exynos5440())
+                return;
+#ifdef CONFIG_SOC_EXYNOS5250
        s3c24xx_register_baseclocks(xtal);
        s5p_register_clocks(xtal);
        exynos5_register_clocks();
        exynos5_setup_clocks();
+#endif
 }
 #define COMBINER_ENABLE_SET     0x0
diff --git a/arch/arm/mach-highbank/highbank.c b/arch/arm/mach-highbank/highbank.c
index f6ca285ee5c5..41e254cac1ac 100644
--- a/arch/arm/mach-highbank/highbank.c
+++ b/arch/arm/mach-highbank/highbank.c
@@ -131,7 +131,7 @@ static void __init highbank_timer_init(void)
 static void highbank_power_off(void)
 {
-        hignbank_set_pwr_shutdown();
+        highbank_set_pwr_shutdown();
        while (1)
                cpu_do_idle();
diff --git a/arch/arm/mach-highbank/hotplug.c b/arch/arm/mach-highbank/hotplug.c
index 7b60faccd551..f30c52843396 100644
--- a/arch/arm/mach-highbank/hotplug.c
+++ b/arch/arm/mach-highbank/hotplug.c
@@ -30,7 +30,7 @@ void __ref highbank_cpu_die(unsigned int cpu)
 {
        flush_cache_all();
-        highbank_set_cpu_jump(cpu, secondary_startup);
+        highbank_set_cpu_jump(cpu, phys_to_virt(0));
        highbank_set_core_pwr();
        cpu_do_idle();
diff --git a/arch/arm/mach-highbank/platsmp.c b/arch/arm/mach-highbank/platsmp.c
index 1129957f6c1d..4ecc864ac8b9 100644
--- a/arch/arm/mach-highbank/platsmp.c
+++ b/arch/arm/mach-highbank/platsmp.c
@@ -32,6 +32,7 @@ static void __cpuinit highbank_secondary_init(unsigned int cpu)
 static int __cpuinit highbank_boot_secondary(unsigned int cpu, struct task_struct *idle)
 {
+        highbank_set_cpu_jump(cpu, secondary_startup);
        gic_raise_softirq(cpumask_of(cpu), 0);
        return 0;
 }
@@ -61,19 +62,8 @@ static void __init highbank_smp_init_cpus(void)
 static void __init highbank_smp_prepare_cpus(unsigned int max_cpus)
 {
-        int i;
        if (scu_base_addr)
                scu_enable(scu_base_addr);
-        /*
-         * Write the address of secondary startup into the jump table
-         * The cores are in wfi and wait until they receive a soft interrupt
-         * and a non-zero value to jump to. Then the secondary CPU branches
-         * to this address.
-         */
-        for (i = 1; i < max_cpus; i++)
-                highbank_set_cpu_jump(i, secondary_startup);
 }
 struct smp_operations highbank_smp_ops __initdata = {
diff --git a/arch/arm/mach-highbank/pm.c b/arch/arm/mach-highbank/pm.c
index 74aa135966f0..04eddb4f4380 100644
--- a/arch/arm/mach-highbank/pm.c
+++ b/arch/arm/mach-highbank/pm.c
@@ -14,10 +14,12 @@
 * this program.  If not, see <http://www.gnu.org/licenses/>.
 */
+#include <linux/cpu_pm.h>
 #include <linux/init.h>
 #include <linux/io.h>
 #include <linux/suspend.h>
+#include <asm/cacheflush.h>
 #include <asm/proc-fns.h>
 #include <asm/suspend.h>
@@ -26,16 +28,31 @@
 static int highbank_suspend_finish(unsigned long val)
 {
+        outer_flush_all();
+        outer_disable();
+        highbank_set_pwr_suspend();
        cpu_do_idle();
+        highbank_clear_pwr_request();
        return 0;
 }
 static int highbank_pm_enter(suspend_state_t state)
 {
-        hignbank_set_pwr_suspend();
+        cpu_pm_enter();
+        cpu_cluster_pm_enter();
        highbank_set_cpu_jump(0, cpu_resume);
        cpu_suspend(0, highbank_suspend_finish);
+        cpu_cluster_pm_exit();
+        cpu_pm_exit();
+        highbank_smc1(0x102, 0x1);
+        if (scu_base_addr)
+                scu_enable(scu_base_addr);
        return 0;
 }
diff --git a/arch/arm/mach-highbank/sysregs.h b/arch/arm/mach-highbank/sysregs.h
index e13e8ea7c6cb..70af9d13fcef 100644
--- a/arch/arm/mach-highbank/sysregs.h
+++ b/arch/arm/mach-highbank/sysregs.h
@@ -44,28 +44,43 @@ static inline void highbank_set_core_pwr(void)
                writel_relaxed(1, sregs_base + SREG_CPU_PWR_CTRL(cpu));
 }
-static inline void hignbank_set_pwr_suspend(void)
+static inline void highbank_clear_core_pwr(void)
+{
+        int cpu = cpu_logical_map(smp_processor_id());
+        if (scu_base_addr)
+                scu_power_mode(scu_base_addr, SCU_PM_NORMAL);
+        else
+                writel_relaxed(0, sregs_base + SREG_CPU_PWR_CTRL(cpu));
+}
+static inline void highbank_set_pwr_suspend(void)
 {
        writel(HB_PWR_SUSPEND, sregs_base + HB_SREG_A9_PWR_REQ);
        highbank_set_core_pwr();
 }
-static inline void hignbank_set_pwr_shutdown(void)
+static inline void highbank_set_pwr_shutdown(void)
 {
        writel(HB_PWR_SHUTDOWN, sregs_base + HB_SREG_A9_PWR_REQ);
        highbank_set_core_pwr();
 }
-static inline void hignbank_set_pwr_soft_reset(void)
+static inline void highbank_set_pwr_soft_reset(void)
 {
        writel(HB_PWR_SOFT_RESET, sregs_base + HB_SREG_A9_PWR_REQ);
        highbank_set_core_pwr();
 }
-static inline void hignbank_set_pwr_hard_reset(void)
+static inline void highbank_set_pwr_hard_reset(void)
 {
        writel(HB_PWR_HARD_RESET, sregs_base + HB_SREG_A9_PWR_REQ);
        highbank_set_core_pwr();
 }
+static inline void highbank_clear_pwr_request(void)
+{
+        writel(~0UL, sregs_base + HB_SREG_A9_PWR_REQ);
+        highbank_clear_core_pwr();
+}
 #endif
diff --git a/arch/arm/mach-highbank/system.c b/arch/arm/mach-highbank/system.c
index aed96ad9bd4a..37d8384dcf19 100644
--- a/arch/arm/mach-highbank/system.c
+++ b/arch/arm/mach-highbank/system.c
@@ -22,9 +22,9 @@
 void highbank_restart(char mode, const char *cmd)
 {
        if (mode == 'h')
-                hignbank_set_pwr_hard_reset();
+                highbank_set_pwr_hard_reset();
        else
-                hignbank_set_pwr_soft_reset();
+                highbank_set_pwr_soft_reset();
        while (1)
                cpu_do_idle();
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 1ad0d76de8c7..0a2349dc7018 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -841,8 +841,6 @@ config SOC_IMX6Q
        select ARCH_HAS_CPUFREQ
        select ARCH_HAS_OPP
        select ARM_CPU_SUSPEND if PM
-        select ARM_ERRATA_743622
-        select ARM_ERRATA_751472
        select ARM_ERRATA_754322
        select ARM_ERRATA_764369 if SMP
        select ARM_ERRATA_775420
@@ -853,6 +851,7 @@ config SOC_IMX6Q
        select HAVE_CAN_FLEXCAN if CAN
        select HAVE_IMX_GPC
        select HAVE_IMX_MMDC
+        select HAVE_IMX_SRC
        select HAVE_SMP
        select MFD_SYSCON
        select PINCTRL
diff --git a/arch/arm/mach-imx/clk-imx25.c b/arch/arm/mach-imx/clk-imx25.c
index b197aa73dc4b..2c570cdaae7b 100644
--- a/arch/arm/mach-imx/clk-imx25.c
+++ b/arch/arm/mach-imx/clk-imx25.c
@@ -254,9 +254,9 @@ int __init mx25_clocks_init(void)
        clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.2");
        clk_register_clkdev(clk[usbotg_ahb], "ahb", "mxc-ehci.2");
        clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.2");
-        clk_register_clkdev(clk[ipg], "ipg", "fsl-usb2-udc");
+        clk_register_clkdev(clk[ipg], "ipg", "imx-udc-mx27");
-        clk_register_clkdev(clk[usbotg_ahb], "ahb", "fsl-usb2-udc");
+        clk_register_clkdev(clk[usbotg_ahb], "ahb", "imx-udc-mx27");
-        clk_register_clkdev(clk[usb_div], "per", "fsl-usb2-udc");
+        clk_register_clkdev(clk[usb_div], "per", "imx-udc-mx27");
        clk_register_clkdev(clk[nfc_ipg_per], NULL, "imx25-nand.0");
        /* i.mx25 has the i.mx35 type cspi */
        clk_register_clkdev(clk[cspi1_ipg], NULL, "imx35-cspi.0");
diff --git a/arch/arm/mach-imx/clk-imx27.c b/arch/arm/mach-imx/clk-imx27.c
index 4c1d1e4efc74..1ffe3b534e51 100644
--- a/arch/arm/mach-imx/clk-imx27.c
+++ b/arch/arm/mach-imx/clk-imx27.c
@@ -236,9 +236,9 @@ int __init mx27_clocks_init(unsigned long fref)
        clk_register_clkdev(clk[lcdc_ahb_gate], "ahb", "imx21-fb.0");
        clk_register_clkdev(clk[csi_ahb_gate], "ahb", "imx27-camera.0");
        clk_register_clkdev(clk[per4_gate], "per", "imx27-camera.0");
-        clk_register_clkdev(clk[usb_div], "per", "fsl-usb2-udc");
+        clk_register_clkdev(clk[usb_div], "per", "imx-udc-mx27");
-        clk_register_clkdev(clk[usb_ipg_gate], "ipg", "fsl-usb2-udc");
+        clk_register_clkdev(clk[usb_ipg_gate], "ipg", "imx-udc-mx27");
-        clk_register_clkdev(clk[usb_ahb_gate], "ahb", "fsl-usb2-udc");
+        clk_register_clkdev(clk[usb_ahb_gate], "ahb", "imx-udc-mx27");
        clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.0");
        clk_register_clkdev(clk[usb_ipg_gate], "ipg", "mxc-ehci.0");
        clk_register_clkdev(clk[usb_ahb_gate], "ahb", "mxc-ehci.0");
diff --git a/arch/arm/mach-imx/clk-imx31.c b/arch/arm/mach-imx/clk-imx31.c
index 8be64e0a4ace..16ccbd41dea9 100644
--- a/arch/arm/mach-imx/clk-imx31.c
+++ b/arch/arm/mach-imx/clk-imx31.c
@@ -139,9 +139,9 @@ int __init mx31_clocks_init(unsigned long fref)
        clk_register_clkdev(clk[usb_div_post], "per", "mxc-ehci.2");
        clk_register_clkdev(clk[usb_gate], "ahb", "mxc-ehci.2");
        clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.2");
-        clk_register_clkdev(clk[usb_div_post], "per", "fsl-usb2-udc");
+        clk_register_clkdev(clk[usb_div_post], "per", "imx-udc-mx27");
-        clk_register_clkdev(clk[usb_gate], "ahb", "fsl-usb2-udc");
+        clk_register_clkdev(clk[usb_gate], "ahb", "imx-udc-mx27");
-        clk_register_clkdev(clk[ipg], "ipg", "fsl-usb2-udc");
+        clk_register_clkdev(clk[ipg], "ipg", "imx-udc-mx27");
        clk_register_clkdev(clk[csi_gate], NULL, "mx3-camera.0");
        /* i.mx31 has the i.mx21 type uart */
        clk_register_clkdev(clk[uart1_gate], "per", "imx21-uart.0");
diff --git a/arch/arm/mach-imx/clk-imx35.c b/arch/arm/mach-imx/clk-imx35.c
index 66f3d65ea275..f0727e80815d 100644
--- a/arch/arm/mach-imx/clk-imx35.c
+++ b/arch/arm/mach-imx/clk-imx35.c
@@ -251,9 +251,9 @@ int __init mx35_clocks_init()
        clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.2");
        clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.2");
        clk_register_clkdev(clk[usbotg_gate], "ahb", "mxc-ehci.2");
-        clk_register_clkdev(clk[usb_div], "per", "fsl-usb2-udc");
+        clk_register_clkdev(clk[usb_div], "per", "imx-udc-mx27");
-        clk_register_clkdev(clk[ipg], "ipg", "fsl-usb2-udc");
+        clk_register_clkdev(clk[ipg], "ipg", "imx-udc-mx27");
-        clk_register_clkdev(clk[usbotg_gate], "ahb", "fsl-usb2-udc");
+        clk_register_clkdev(clk[usbotg_gate], "ahb", "imx-udc-mx27");
        clk_register_clkdev(clk[wdog_gate], NULL, "imx2-wdt.0");
        clk_register_clkdev(clk[nfc_div], NULL, "imx25-nand.0");
        clk_register_clkdev(clk[csi_gate], NULL, "mx3-camera.0");
diff --git a/arch/arm/mach-imx/clk-imx51-imx53.c b/arch/arm/mach-imx/clk-imx51-imx53.c
index 579023f59dc1..fb7cb841b64c 100644
--- a/arch/arm/mach-imx/clk-imx51-imx53.c
+++ b/arch/arm/mach-imx/clk-imx51-imx53.c
@@ -269,9 +269,9 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil,
        clk_register_clkdev(clk[usboh3_per_gate], "per", "mxc-ehci.2");
        clk_register_clkdev(clk[usboh3_gate], "ipg", "mxc-ehci.2");
        clk_register_clkdev(clk[usboh3_gate], "ahb", "mxc-ehci.2");
-        clk_register_clkdev(clk[usboh3_per_gate], "per", "fsl-usb2-udc");
+        clk_register_clkdev(clk[usboh3_per_gate], "per", "imx-udc-mx51");
-        clk_register_clkdev(clk[usboh3_gate], "ipg", "fsl-usb2-udc");
+        clk_register_clkdev(clk[usboh3_gate], "ipg", "imx-udc-mx51");
-        clk_register_clkdev(clk[usboh3_gate], "ahb", "fsl-usb2-udc");
+        clk_register_clkdev(clk[usboh3_gate], "ahb", "imx-udc-mx51");
        clk_register_clkdev(clk[nfc_gate], NULL, "imx51-nand");
        clk_register_clkdev(clk[ssi1_ipg_gate], NULL, "imx-ssi.0");
        clk_register_clkdev(clk[ssi2_ipg_gate], NULL, "imx-ssi.1");
diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c
index 7f2c10c7413a..c0c4e723b7f5 100644
--- a/arch/arm/mach-imx/clk-imx6q.c
+++ b/arch/arm/mach-imx/clk-imx6q.c
@@ -436,6 +436,9 @@ int __init mx6q_clocks_init(void)
        for (i = 0; i < ARRAY_SIZE(clks_init_on); i++)
                clk_prepare_enable(clk[clks_init_on[i]]);
+        /* Set initial power mode */
+        imx6q_set_lpm(WAIT_CLOCKED);
        np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-gpt");
        base = of_iomap(np, 0);
        WARN_ON(!base);
diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h
index 7191ab4434e5..fa36fb84ab19 100644
--- a/arch/arm/mach-imx/common.h
+++ b/arch/arm/mach-imx/common.h
@@ -142,6 +142,7 @@ extern int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode);
 extern void imx6q_clock_map_io(void);
 extern void imx_cpu_die(unsigned int cpu);
+extern int imx_cpu_kill(unsigned int cpu);
 #ifdef CONFIG_PM
 extern void imx6q_pm_init(void);
diff --git a/arch/arm/mach-imx/cpufreq.c b/arch/arm/mach-imx/cpufreq.c
index 36e8b3994470..d8c75c3c925d 100644
--- a/arch/arm/mach-imx/cpufreq.c
+++ b/arch/arm/mach-imx/cpufreq.c
@@ -188,7 +188,7 @@ static struct cpufreq_driver mxc_driver = {
        .name = "imx",
 };
-static int __devinit mxc_cpufreq_driver_init(void)
+static int mxc_cpufreq_driver_init(void)
 {
        return cpufreq_register_driver(&mxc_driver);
 }
diff --git a/arch/arm/mach-imx/devices/devices-common.h b/arch/arm/mach-imx/devices/devices-common.h
index 6277baf1b7be..9bd5777ff0e7 100644
--- a/arch/arm/mach-imx/devices/devices-common.h
+++ b/arch/arm/mach-imx/devices/devices-common.h
@@ -63,6 +63,7 @@ struct platform_device *__init imx_add_flexcan(
 #include <linux/fsl_devices.h>
 struct imx_fsl_usb2_udc_data {
+        const char *devid;
        resource_size_t iobase;
        resource_size_t irq;
 };
diff --git a/arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c b/arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c
index 37e44398197b..3c06bd96e9cc 100644
--- a/arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c
+++ b/arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c
@@ -11,35 +11,36 @@
 #include "../hardware.h"
 #include "devices-common.h"
-#define imx_fsl_usb2_udc_data_entry_single(soc)                         \
+#define imx_fsl_usb2_udc_data_entry_single(soc, _devid)                 \
        {                                                               \
+                .devid = _devid,                                        \
                .iobase = soc ## _USB_OTG_BASE_ADDR,                    \
                .irq = soc ## _INT_USB_OTG,                             \
        }
 #ifdef CONFIG_SOC_IMX25
 const struct imx_fsl_usb2_udc_data imx25_fsl_usb2_udc_data __initconst =
-        imx_fsl_usb2_udc_data_entry_single(MX25);
+        imx_fsl_usb2_udc_data_entry_single(MX25, "imx-udc-mx27");
 #endif /* ifdef CONFIG_SOC_IMX25 */
 #ifdef CONFIG_SOC_IMX27
 const struct imx_fsl_usb2_udc_data imx27_fsl_usb2_udc_data __initconst =
-        imx_fsl_usb2_udc_data_entry_single(MX27);
+        imx_fsl_usb2_udc_data_entry_single(MX27, "imx-udc-mx27");
 #endif /* ifdef CONFIG_SOC_IMX27 */
 #ifdef CONFIG_SOC_IMX31
 const struct imx_fsl_usb2_udc_data imx31_fsl_usb2_udc_data __initconst =
-        imx_fsl_usb2_udc_data_entry_single(MX31);
+        imx_fsl_usb2_udc_data_entry_single(MX31, "imx-udc-mx27");
 #endif /* ifdef CONFIG_SOC_IMX31 */
 #ifdef CONFIG_SOC_IMX35
 const struct imx_fsl_usb2_udc_data imx35_fsl_usb2_udc_data __initconst =
-        imx_fsl_usb2_udc_data_entry_single(MX35);
+        imx_fsl_usb2_udc_data_entry_single(MX35, "imx-udc-mx27");
 #endif /* ifdef CONFIG_SOC_IMX35 */
 #ifdef CONFIG_SOC_IMX51
 const struct imx_fsl_usb2_udc_data imx51_fsl_usb2_udc_data __initconst =
-        imx_fsl_usb2_udc_data_entry_single(MX51);
+        imx_fsl_usb2_udc_data_entry_single(MX51, "imx-udc-mx51");
 #endif
 struct platform_device *__init imx_add_fsl_usb2_udc(
@@ -57,7 +58,7 @@ struct platform_device *__init imx_add_fsl_usb2_udc(
                        .flags = IORESOURCE_IRQ,
                },
        };
-        return imx_add_platform_device_dmamask("fsl-usb2-udc", -1,
+        return imx_add_platform_device_dmamask(data->devid, -1,
                        res, ARRAY_SIZE(res),
                        pdata, sizeof(*pdata), DMA_BIT_MASK(32));
 }
diff --git a/arch/arm/mach-imx/devices/platform-imx-fb.c b/arch/arm/mach-imx/devices/platform-imx-fb.c
index 10b0ed39f07f..25a47c616b2d 100644
--- a/arch/arm/mach-imx/devices/platform-imx-fb.c
+++ b/arch/arm/mach-imx/devices/platform-imx-fb.c
@@ -54,7 +54,7 @@ struct platform_device *__init imx_add_imx_fb(
                        .flags = IORESOURCE_IRQ,
                },
        };
-        return imx_add_platform_device_dmamask("imx-fb", 0,
+        return imx_add_platform_device_dmamask(data->devid, 0,
                        res, ARRAY_SIZE(res),
                        pdata, sizeof(*pdata), DMA_BIT_MASK(32));
 }
diff --git a/arch/arm/mach-imx/hotplug.c b/arch/arm/mach-imx/hotplug.c
index 3dec962b0770..7bc5fe15dda2 100644
--- a/arch/arm/mach-imx/hotplug.c
+++ b/arch/arm/mach-imx/hotplug.c
@@ -46,9 +46,11 @@ static inline void cpu_enter_lowpower(void)
 void imx_cpu_die(unsigned int cpu)
 {
        cpu_enter_lowpower();
-        imx_enable_cpu(cpu, false);
+        cpu_do_idle();
+}
-        /* spin here until hardware takes it down */
+int imx_cpu_kill(unsigned int cpu)
-        while (1)
+{
-                ;
+        imx_enable_cpu(cpu, false);
+        return 1;
 }
diff --git a/arch/arm/mach-imx/iram.h b/arch/arm/mach-imx/iram.h
deleted file mode 100644
index 022690c33702..000000000000
--- a/arch/arm/mach-imx/iram.h
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-#include <linux/errno.h>
-#ifdef CONFIG_IRAM_ALLOC
-int __init iram_init(unsigned long base, unsigned long size);
-void __iomem *iram_alloc(unsigned int size, unsigned long *dma_addr);
-void iram_free(unsigned long dma_addr, unsigned int size);
-#else
-static inline int __init iram_init(unsigned long base, unsigned long size)
-{
-        return -ENOMEM;
-}
-static inline void __iomem *iram_alloc(unsigned int size, unsigned long *dma_addr)
-{
-        return NULL;
-}
-static inline void iram_free(unsigned long base, unsigned long size) {}
-#endif
diff --git a/arch/arm/mach-imx/iram_alloc.c b/arch/arm/mach-imx/iram_alloc.c
index 6c80424f678e..e05cf407db65 100644
--- a/arch/arm/mach-imx/iram_alloc.c
+++ b/arch/arm/mach-imx/iram_alloc.c
@@ -22,8 +22,7 @@
 #include <linux/module.h>
 #include <linux/spinlock.h>
 #include <linux/genalloc.h>
+#include "linux/platform_data/imx-iram.h"
-#include "iram.h"
 static unsigned long iram_phys_base;
 static void __iomem *iram_virt_base;
diff --git a/arch/arm/mach-imx/mmdc.c b/arch/arm/mach-imx/mmdc.c
index c461e98496c3..7a9686ad994c 100644
--- a/arch/arm/mach-imx/mmdc.c
+++ b/arch/arm/mach-imx/mmdc.c
@@ -21,7 +21,7 @@
 #define BP_MMDC_MAPSR_PSD       0
 #define BP_MMDC_MAPSR_PSS       4
-static int __devinit imx_mmdc_probe(struct platform_device *pdev)
+static int imx_mmdc_probe(struct platform_device *pdev)
 {
        struct device_node *np = pdev->dev.of_node;
        void __iomem *mmdc_base, *reg;
diff --git a/arch/arm/mach-imx/platsmp.c b/arch/arm/mach-imx/platsmp.c
index 3777b805b76b..66fae885c842 100644
--- a/arch/arm/mach-imx/platsmp.c
+++ b/arch/arm/mach-imx/platsmp.c
@@ -92,5 +92,6 @@ struct smp_operations  imx_smp_ops __initdata = {
        .smp_boot_secondary     = imx_boot_secondary,
 #ifdef CONFIG_HOTPLUG_CPU
        .cpu_die                = imx_cpu_die,
+        .cpu_kill               = imx_cpu_kill,
 #endif
 };
diff --git a/arch/arm/mach-imx/pm-imx6q.c b/arch/arm/mach-imx/pm-imx6q.c
index a17543da602d..ee42d20cba19 100644
--- a/arch/arm/mach-imx/pm-imx6q.c
+++ b/arch/arm/mach-imx/pm-imx6q.c
@@ -41,6 +41,7 @@ static int imx6q_pm_enter(suspend_state_t state)
                cpu_suspend(0, imx6q_suspend_finish);
                imx_smp_prepare();
                imx_gpc_post_resume();
+                imx6q_set_lpm(WAIT_CLOCKED);
                break;
        default:
                return -EINVAL;
diff --git a/arch/arm/mach-integrator/pci_v3.c b/arch/arm/mach-integrator/pci_v3.c
index be50e795536d..e7fcea7f3300 100644
--- a/arch/arm/mach-integrator/pci_v3.c
+++ b/arch/arm/mach-integrator/pci_v3.c
@@ -475,13 +475,12 @@ int __init pci_v3_setup(int nr, struct pci_sys_data *sys)
 {
        int ret = 0;
+        if (!ap_syscon_base)
+                return -EINVAL;
        if (nr == 0) {
                sys->mem_offset = PHYS_PCI_MEM_BASE;
                ret = pci_v3_setup_resources(sys);
-                /* Remap the Integrator system controller */
-                ap_syscon_base = ioremap(INTEGRATOR_SC_BASE, 0x100);
-                if (!ap_syscon_base)
-                        return -EINVAL;
        }
        return ret;
@@ -497,6 +496,13 @@ void __init pci_v3_preinit(void)
        unsigned int temp;
        int ret;
+        /* Remap the Integrator system controller */
+        ap_syscon_base = ioremap(INTEGRATOR_SC_BASE, 0x100);
+        if (!ap_syscon_base) {
+                pr_err("unable to remap the AP syscon for PCIv3\n");
+                return;
+        }
        pcibios_min_mem = 0x00100000;
        /*
diff --git a/arch/arm/mach-iop13xx/pci.c b/arch/arm/mach-iop13xx/pci.c
index 2f28018c4447..9082b84aeebb 100644
--- a/arch/arm/mach-iop13xx/pci.c
+++ b/arch/arm/mach-iop13xx/pci.c
@@ -504,7 +504,7 @@ iop13xx_pci_abort(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 /* Scan an IOP13XX PCI bus.  nr selects which ATU we use.
 */
-struct pci_bus * __devinit iop13xx_scan_bus(int nr, struct pci_sys_data *sys)
+struct pci_bus *iop13xx_scan_bus(int nr, struct pci_sys_data *sys)
 {
        int which_atu;
        struct pci_bus *bus = NULL;
diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile
index 8d2e5a96247c..d6653095a1eb 100644
--- a/arch/arm/mach-kirkwood/Makefile
+++ b/arch/arm/mach-kirkwood/Makefile
@@ -19,7 +19,6 @@ obj-$(CONFIG_MACH_NET2BIG_V2)		+= netxbig_v2-setup.o lacie_v2-common.o
 obj-$(CONFIG_MACH_NET5BIG_V2)           += netxbig_v2-setup.o lacie_v2-common.o
 obj-$(CONFIG_MACH_T5325)                += t5325-setup.o
-obj-$(CONFIG_CPU_IDLE)                  += cpuidle.o
 obj-$(CONFIG_ARCH_KIRKWOOD_DT)          += board-dt.o
 obj-$(CONFIG_MACH_DREAMPLUG_DT)         += board-dreamplug.o
 obj-$(CONFIG_MACH_ICONNECT_DT)          += board-iconnect.o
diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c
index d6f57fd6f788..95cc04d14b65 100644
--- a/arch/arm/mach-kirkwood/board-dt.c
+++ b/arch/arm/mach-kirkwood/board-dt.c
@@ -67,6 +67,10 @@ static void __init kirkwood_legacy_clk_init(void)
        orion_clkdev_add(NULL, "mv643xx_eth_port.1",
                         of_clk_get_from_provider(&clkspec));
+        clkspec.args[0] = CGC_BIT_SDIO;
+        orion_clkdev_add(NULL, "mvsdio",
+                         of_clk_get_from_provider(&clkspec));
 }
 static void __init kirkwood_of_clk_init(void)
@@ -94,6 +98,8 @@ static void __init kirkwood_dt_init(void)
        /* Setup root of clk tree */
        kirkwood_of_clk_init();
+        kirkwood_cpuidle_init();
 #ifdef CONFIG_KEXEC
        kexec_reinit = kirkwood_enable_pcie;
 #endif
diff --git a/arch/arm/mach-kirkwood/board-ib62x0.c b/arch/arm/mach-kirkwood/board-ib62x0.c
index 9f6f496380d8..9a857ae83984 100644
--- a/arch/arm/mach-kirkwood/board-ib62x0.c
+++ b/arch/arm/mach-kirkwood/board-ib62x0.c
@@ -14,7 +14,6 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/mv643xx_eth.h>
-#include <linux/input.h>
 #include "common.h"
 static struct mv643xx_eth_platform_data ib62x0_ge00_data = {
diff --git a/arch/arm/mach-kirkwood/board-mplcec4.c b/arch/arm/mach-kirkwood/board-mplcec4.c
index 56bfe5a1605a..3264925b8318 100644
--- a/arch/arm/mach-kirkwood/board-mplcec4.c
+++ b/arch/arm/mach-kirkwood/board-mplcec4.c
@@ -14,7 +14,6 @@
 #include <linux/mv643xx_eth.h>
 #include <linux/platform_data/mmc-mvsdio.h>
 #include "common.h"
-#include "mpp.h"
 static struct mv643xx_eth_platform_data mplcec4_ge00_data = {
        .phy_addr       = MV643XX_ETH_PHY_ADDR(1),
diff --git a/arch/arm/mach-kirkwood/board-ns2.c b/arch/arm/mach-kirkwood/board-ns2.c
index 8821720ab5a4..f4632a809f68 100644
--- a/arch/arm/mach-kirkwood/board-ns2.c
+++ b/arch/arm/mach-kirkwood/board-ns2.c
@@ -18,47 +18,11 @@
 #include <linux/gpio.h>
 #include <linux/of.h>
 #include "common.h"
-#include "mpp.h"
 static struct mv643xx_eth_platform_data ns2_ge00_data = {
        .phy_addr       = MV643XX_ETH_PHY_ADDR(8),
 };
-static unsigned int ns2_mpp_config[] __initdata = {
-        MPP0_SPI_SCn,
-        MPP1_SPI_MOSI,
-        MPP2_SPI_SCK,
-        MPP3_SPI_MISO,
-        MPP4_NF_IO6,
-        MPP5_NF_IO7,
-        MPP6_SYSRST_OUTn,
-        MPP7_GPO,               /* Fan speed (bit 1) */
-        MPP8_TW0_SDA,
-        MPP9_TW0_SCK,
-        MPP10_UART0_TXD,
-        MPP11_UART0_RXD,
-        MPP12_GPO,              /* Red led */
-        MPP14_GPIO,             /* USB fuse */
-        MPP16_GPIO,             /* SATA 0 power */
-        MPP17_GPIO,             /* SATA 1 power */
-        MPP18_NF_IO0,
-        MPP19_NF_IO1,
-        MPP20_SATA1_ACTn,
-        MPP21_SATA0_ACTn,
-        MPP22_GPIO,             /* Fan speed (bit 0) */
-        MPP23_GPIO,             /* Fan power */
-        MPP24_GPIO,             /* USB mode select */
-        MPP25_GPIO,             /* Fan rotation fail */
-        MPP26_GPIO,             /* USB device vbus */
-        MPP28_GPIO,             /* USB enable host vbus */
-        MPP29_GPIO,             /* Blue led (slow register) */
-        MPP30_GPIO,             /* Blue led (command register) */
-        MPP31_GPIO,             /* Board power off */
-        MPP32_GPIO,             /* Power button (0 = Released, 1 = Pushed) */
-        MPP33_GPO,              /* Fan speed (bit 2) */
-        0
-};
 #define NS2_GPIO_POWER_OFF      31
 static void ns2_power_off(void)
@@ -71,8 +35,6 @@ void __init ns2_init(void)
        /*
         * Basic setup. Needs to be called early.
         */
-        kirkwood_mpp_conf(ns2_mpp_config);
        if (of_machine_is_compatible("lacie,netspace_lite_v2") ||
            of_machine_is_compatible("lacie,netspace_mini_v2"))
                ns2_ge00_data.phy_addr = MV643XX_ETH_PHY_ADDR(0);
diff --git a/arch/arm/mach-kirkwood/board-nsa310.c b/arch/arm/mach-kirkwood/board-nsa310.c
index f58d2e1a4042..2fa71400ecb3 100644
--- a/arch/arm/mach-kirkwood/board-nsa310.c
+++ b/arch/arm/mach-kirkwood/board-nsa310.c
@@ -12,10 +12,8 @@
 #include <linux/init.h>
 #include <linux/i2c.h>
 #include <linux/gpio.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
 #include <mach/kirkwood.h>
+#include <linux/of.h>
 #include "common.h"
 #include "mpp.h"
@@ -79,14 +77,10 @@ static void __init nsa310_gpio_init(void)
 void __init nsa310_init(void)
 {
-        u32 dev, rev;
        kirkwood_mpp_conf(nsa310_mpp_config);
        nsa310_gpio_init();
-        kirkwood_pcie_id(&dev, &rev);
        i2c_register_board_info(0, ARRAY_AND_SIZE(nsa310_i2c_info));
 }
diff --git a/arch/arm/mach-kirkwood/board-usi_topkick.c b/arch/arm/mach-kirkwood/board-usi_topkick.c
index 15e69fcde9f4..23d2dd1b1b1e 100644
--- a/arch/arm/mach-kirkwood/board-usi_topkick.c
+++ b/arch/arm/mach-kirkwood/board-usi_topkick.c
@@ -64,8 +64,6 @@ static unsigned int topkick_mpp_config[] __initdata = {
        0
 };
-#define TOPKICK_SATA0_PWR_ENABLE 36
 void __init usi_topkick_init(void)
 {
        /*
@@ -73,8 +71,6 @@ void __init usi_topkick_init(void)
         */
        kirkwood_mpp_conf(topkick_mpp_config);
-        /* SATA0 power enable */
-        gpio_set_value(TOPKICK_SATA0_PWR_ENABLE, 1);
        kirkwood_ge00_init(&topkick_ge00_data);
        kirkwood_sdio_init(&topkick_mvsdio_data);
diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c
index b5ad4dff6b12..49792a0cd2d3 100644
--- a/arch/arm/mach-kirkwood/common.c
+++ b/arch/arm/mach-kirkwood/common.c
@@ -499,6 +499,28 @@ void __init kirkwood_wdt_init(void)
        orion_wdt_init();
 }
+/*****************************************************************************
+ * CPU idle
+ ****************************************************************************/
+static struct resource kirkwood_cpuidle_resource[] = {
+        {
+                .flags  = IORESOURCE_MEM,
+                .start  = DDR_OPERATION_BASE,
+                .end    = DDR_OPERATION_BASE + 3,
+        },
+};
+static struct platform_device kirkwood_cpuidle = {
+        .name           = "kirkwood_cpuidle",
+        .id             = -1,
+        .resource       = kirkwood_cpuidle_resource,
+        .num_resources  = 1,
+};
+void __init kirkwood_cpuidle_init(void)
+{
+        platform_device_register(&kirkwood_cpuidle);
+}
 /*****************************************************************************
 * Time handling
@@ -667,6 +689,7 @@ void __init kirkwood_init(void)
        kirkwood_xor1_init();
        kirkwood_crypto_init();
+        kirkwood_cpuidle_init();
 #ifdef CONFIG_KEXEC
        kexec_reinit = kirkwood_enable_pcie;
 #endif
diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h
index 283ab611e8da..e956d0277dd1 100644
--- a/arch/arm/mach-kirkwood/common.h
+++ b/arch/arm/mach-kirkwood/common.h
@@ -50,6 +50,7 @@ void kirkwood_nand_init(struct mtd_partition *parts, int nr_parts, int delay);
 void kirkwood_nand_init_rnb(struct mtd_partition *parts, int nr_parts,
                            int (*dev_ready)(struct mtd_info *));
 void kirkwood_audio_init(void);
+void kirkwood_cpuidle_init(void);
 void kirkwood_restart(char, const char *);
 void kirkwood_clk_init(void);
diff --git a/arch/arm/mach-kirkwood/cpuidle.c b/arch/arm/mach-kirkwood/cpuidle.c
deleted file mode 100644
index f7304670f2f8..000000000000
--- a/arch/arm/mach-kirkwood/cpuidle.c
+++ /dev/null
@@ -1,73 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/cpuidle.c
- *
- * CPU idle Marvell Kirkwood SoCs
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- *
- * The cpu idle uses wait-for-interrupt and DDR self refresh in order
- * to implement two idle states -
- * #1 wait-for-interrupt
- * #2 wait-for-interrupt and DDR self refresh
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/cpuidle.h>
-#include <linux/io.h>
-#include <linux/export.h>
-#include <asm/proc-fns.h>
-#include <asm/cpuidle.h>
-#include <mach/kirkwood.h>
-#define KIRKWOOD_MAX_STATES     2
-/* Actual code that puts the SoC in different idle states */
-static int kirkwood_enter_idle(struct cpuidle_device *dev,
-                                struct cpuidle_driver *drv,
-                               int index)
-{
-        writel(0x7, DDR_OPERATION_BASE);
-        cpu_do_idle();
-        return index;
-}
-static struct cpuidle_driver kirkwood_idle_driver = {
-        .name                   = "kirkwood_idle",
-        .owner                  = THIS_MODULE,
-        .en_core_tk_irqen       = 1,
-        .states[0]              = ARM_CPUIDLE_WFI_STATE,
-        .states[1]              = {
-                .enter                  = kirkwood_enter_idle,
-                .exit_latency           = 10,
-                .target_residency       = 100000,
-                .flags                  = CPUIDLE_FLAG_TIME_VALID,
-                .name                   = "DDR SR",
-                .desc                   = "WFI and DDR Self Refresh",
-        },
-        .state_count = KIRKWOOD_MAX_STATES,
-};
-static DEFINE_PER_CPU(struct cpuidle_device, kirkwood_cpuidle_device);
-/* Initialize CPU idle by registering the idle states */
-static int kirkwood_init_cpuidle(void)
-{
-        struct cpuidle_device *device;
-        device = &per_cpu(kirkwood_cpuidle_device, smp_processor_id());
-        device->state_count = KIRKWOOD_MAX_STATES;
-        cpuidle_register_driver(&kirkwood_idle_driver);
-        if (cpuidle_register_device(device)) {
-                pr_err("kirkwood_init_cpuidle: Failed registering\n");
-                return -EIO;
-        }
-        return 0;
-}
-device_initcall(kirkwood_init_cpuidle);
diff --git a/arch/arm/mach-kirkwood/dockstar-setup.c b/arch/arm/mach-kirkwood/dockstar-setup.c
index 77f98f2b0416..060ccf9cb63f 100644
--- a/arch/arm/mach-kirkwood/dockstar-setup.c
+++ b/arch/arm/mach-kirkwood/dockstar-setup.c
@@ -19,7 +19,6 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <mach/kirkwood.h>
-#include <linux/platform_data/mmc-mvsdio.h>
 #include "common.h"
 #include "mpp.h"
diff --git a/arch/arm/mach-kirkwood/include/mach/kirkwood.h b/arch/arm/mach-kirkwood/include/mach/kirkwood.h
index 041653a04a9c..a05563a31c95 100644
--- a/arch/arm/mach-kirkwood/include/mach/kirkwood.h
+++ b/arch/arm/mach-kirkwood/include/mach/kirkwood.h
@@ -60,8 +60,9 @@
 * Register Map
 */
 #define DDR_VIRT_BASE           (KIRKWOOD_REGS_VIRT_BASE + 0x00000)
+#define DDR_PHYS_BASE           (KIRKWOOD_REGS_PHYS_BASE + 0x00000)
 #define  DDR_WINDOW_CPU_BASE    (DDR_VIRT_BASE + 0x1500)
-#define DDR_OPERATION_BASE      (DDR_VIRT_BASE + 0x1418)
+#define DDR_OPERATION_BASE      (DDR_PHYS_BASE + 0x1418)
 #define DEV_BUS_PHYS_BASE       (KIRKWOOD_REGS_PHYS_BASE + 0x10000)
 #define DEV_BUS_VIRT_BASE       (KIRKWOOD_REGS_VIRT_BASE + 0x10000)
diff --git a/arch/arm/mach-kirkwood/pcie.c b/arch/arm/mach-kirkwood/pcie.c
index ef102646ba9a..d96ad4c09972 100644
--- a/arch/arm/mach-kirkwood/pcie.c
+++ b/arch/arm/mach-kirkwood/pcie.c
@@ -214,7 +214,7 @@ static int __init kirkwood_pcie_setup(int nr, struct pci_sys_data *sys)
 * PCI_CLASS_BRIDGE_HOST or Linux will errantly try to process the BAR's on
 * the device. Decoding setup is handled by the orion code.
 */
-static void __devinit rc_pci_fixup(struct pci_dev *dev)
+static void rc_pci_fixup(struct pci_dev *dev)
 {
        if (dev->bus->parent == NULL && dev->devfn == 0) {
                int i;
@@ -247,13 +247,9 @@ static struct hw_pci kirkwood_pci __initdata = {
 static void __init add_pcie_port(int index, void __iomem *base)
 {
-        pr_info("Kirkwood PCIe port %d: ", index);
+        pcie_port_map[num_pcie_ports++] = index;
+        pr_info("Kirkwood PCIe port %d: link %s\n", index,
-        if (orion_pcie_link_up(base)) {
+                orion_pcie_link_up(base) ? "up" : "down");
-                pr_info("link up\n");
-                pcie_port_map[num_pcie_ports++] = index;
-        } else
-                pr_info("link down, ignoring\n");
 }
 void __init kirkwood_pcie_init(unsigned int portmask)
diff --git a/arch/arm/mach-ks8695/board-acs5k.c b/arch/arm/mach-ks8695/board-acs5k.c
index 7beec9b8becd..456d6386edf8 100644
--- a/arch/arm/mach-ks8695/board-acs5k.c
+++ b/arch/arm/mach-ks8695/board-acs5k.c
@@ -92,7 +92,7 @@ static struct i2c_board_info acs5k_i2c_devs[] __initdata = {
        },
 };
-static void __devinit acs5k_i2c_init(void)
+static void acs5k_i2c_init(void)
 {
        /* The gpio interface */
        platform_device_register(&acs5k_i2c_device);
diff --git a/arch/arm/mach-mmp/sram.c b/arch/arm/mach-mmp/sram.c
index a6c08ede4491..bf5e64906e65 100644
--- a/arch/arm/mach-mmp/sram.c
+++ b/arch/arm/mach-mmp/sram.c
@@ -61,7 +61,7 @@ struct gen_pool *sram_get_gpool(char *pool_name)
 }
 EXPORT_SYMBOL(sram_get_gpool);
-static int __devinit sram_probe(struct platform_device *pdev)
+static int sram_probe(struct platform_device *pdev)
 {
        struct sram_platdata *pdata = pdev->dev.platform_data;
        struct sram_bank_info *info;
@@ -125,7 +125,7 @@ out:
        return ret;
 }
-static int __devexit sram_remove(struct platform_device *pdev)
+static int sram_remove(struct platform_device *pdev)
 {
        struct sram_bank_info *info;
diff --git a/arch/arm/mach-msm/proc_comm.c b/arch/arm/mach-msm/proc_comm.c
index 8f1eecd88186..507f5ca80697 100644
--- a/arch/arm/mach-msm/proc_comm.c
+++ b/arch/arm/mach-msm/proc_comm.c
@@ -120,7 +120,7 @@ int msm_proc_comm(unsigned cmd, unsigned *data1, unsigned *data2)
 * and unknown state. This function should be called early to
 * wait on the ARM9.
 */
-void __devinit proc_comm_boot_wait(void)
+void proc_comm_boot_wait(void)
 {
        void __iomem *base = MSM_SHARED_RAM_BASE;
 
diff --git a/arch/arm/mach-msm/smd.c b/arch/arm/mach-msm/smd.c
index c5a2eddc6cdc..b1588a1ea2f8 100644
--- a/arch/arm/mach-msm/smd.c
+++ b/arch/arm/mach-msm/smd.c
@@ -988,7 +988,7 @@ int smd_core_init(void)
        return 0;
 }
-static int __devinit msm_smd_probe(struct platform_device *pdev)
+static int msm_smd_probe(struct platform_device *pdev)
 {
        /*
         * If we haven't waited for the ARM9 to boot up till now,
diff --git a/arch/arm/mach-mv78xx0/pcie.c b/arch/arm/mach-mv78xx0/pcie.c
index a9a154a646dd..ee8c0b51df2c 100644
--- a/arch/arm/mach-mv78xx0/pcie.c
+++ b/arch/arm/mach-mv78xx0/pcie.c
@@ -173,7 +173,7 @@ static struct pci_ops pcie_ops = {
        .write = pcie_wr_conf,
 };
-static void __devinit rc_pci_fixup(struct pci_dev *dev)
+static void rc_pci_fixup(struct pci_dev *dev)
 {
        /*
         * Prevent enumeration of root complex.
diff --git a/arch/arm/mach-mvebu/Makefile b/arch/arm/mach-mvebu/Makefile
index 5dcb369b58aa..99df4df680fd 100644
--- a/arch/arm/mach-mvebu/Makefile
+++ b/arch/arm/mach-mvebu/Makefile
@@ -1,6 +1,8 @@
 ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include \
        -I$(srctree)/arch/arm/plat-orion/include
+AFLAGS_coherency_ll.o           := -Wa,-march=armv7-a
 obj-y += system-controller.o
 obj-$(CONFIG_MACH_ARMADA_370_XP) += armada-370-xp.o irq-armada-370-xp.o addr-map.o coherency.o coherency_ll.o pmsu.o
 obj-$(CONFIG_SMP)                += platsmp.o headsmp.o
diff --git a/arch/arm/mach-nomadik/board-nhk8815.c b/arch/arm/mach-nomadik/board-nhk8815.c
index ab756ed87ef0..c9015ba647a2 100644
--- a/arch/arm/mach-nomadik/board-nhk8815.c
+++ b/arch/arm/mach-nomadik/board-nhk8815.c
@@ -27,7 +27,6 @@
 #include <linux/pinctrl/machine.h>
 #include <linux/platform_data/pinctrl-nomadik.h>
 #include <linux/platform_data/clocksource-nomadik-mtu.h>
-#include <linux/platform_data/mtd-nomadik-nand.h>
 #include <asm/hardware/vic.h>
 #include <asm/sizes.h>
 #include <asm/mach-types.h>
diff --git a/arch/arm/mach-nomadik/include/mach/irqs.h b/arch/arm/mach-nomadik/include/mach/irqs.h
index b549d0571548..215f8cdb4004 100644
--- a/arch/arm/mach-nomadik/include/mach/irqs.h
+++ b/arch/arm/mach-nomadik/include/mach/irqs.h
@@ -22,49 +22,49 @@
 #include <mach/hardware.h>
-#define IRQ_VIC_START           1       /* first VIC interrupt is 1 */
+#define IRQ_VIC_START           32      /* first VIC interrupt is 1 */
 /*
 * Interrupt numbers generic for all Nomadik Chip cuts
 */
-#define IRQ_WATCHDOG                    1
+#define IRQ_WATCHDOG                    (IRQ_VIC_START+0)
-#define IRQ_SOFTINT                     2
+#define IRQ_SOFTINT                     (IRQ_VIC_START+1)
-#define IRQ_CRYPTO                      3
+#define IRQ_CRYPTO                      (IRQ_VIC_START+2)
-#define IRQ_OWM                         4
+#define IRQ_OWM                         (IRQ_VIC_START+3)
-#define IRQ_MTU0                        5
+#define IRQ_MTU0                        (IRQ_VIC_START+4)
-#define IRQ_MTU1                        6
+#define IRQ_MTU1                        (IRQ_VIC_START+5)
-#define IRQ_GPIO0                       7
+#define IRQ_GPIO0                       (IRQ_VIC_START+6)
-#define IRQ_GPIO1                       8
+#define IRQ_GPIO1                       (IRQ_VIC_START+7)
-#define IRQ_GPIO2                       9
+#define IRQ_GPIO2                       (IRQ_VIC_START+8)
-#define IRQ_GPIO3                       10
+#define IRQ_GPIO3                       (IRQ_VIC_START+9)
-#define IRQ_RTC_RTT                     11
+#define IRQ_RTC_RTT                     (IRQ_VIC_START+10)
-#define IRQ_SSP                         12
+#define IRQ_SSP                         (IRQ_VIC_START+11)
-#define IRQ_UART0                       13
+#define IRQ_UART0                       (IRQ_VIC_START+12)
-#define IRQ_DMA1                        14
+#define IRQ_DMA1                        (IRQ_VIC_START+13)
-#define IRQ_CLCD_MDIF                   15
+#define IRQ_CLCD_MDIF                   (IRQ_VIC_START+14)
-#define IRQ_DMA0                        16
+#define IRQ_DMA0                        (IRQ_VIC_START+15)
-#define IRQ_PWRFAIL                     17
+#define IRQ_PWRFAIL                     (IRQ_VIC_START+16)
-#define IRQ_UART1                       18
+#define IRQ_UART1                       (IRQ_VIC_START+17)
-#define IRQ_FIRDA                       19
+#define IRQ_FIRDA                       (IRQ_VIC_START+18)
-#define IRQ_MSP0                        20
+#define IRQ_MSP0                        (IRQ_VIC_START+19)
-#define IRQ_I2C0                        21
+#define IRQ_I2C0                        (IRQ_VIC_START+20)
-#define IRQ_I2C1                        22
+#define IRQ_I2C1                        (IRQ_VIC_START+21)
-#define IRQ_SDMMC                       23
+#define IRQ_SDMMC                       (IRQ_VIC_START+22)
-#define IRQ_USBOTG                      24
+#define IRQ_USBOTG                      (IRQ_VIC_START+23)
-#define IRQ_SVA_IT0                     25
+#define IRQ_SVA_IT0                     (IRQ_VIC_START+24)
-#define IRQ_SVA_IT1                     26
+#define IRQ_SVA_IT1                     (IRQ_VIC_START+25)
-#define IRQ_SAA_IT0                     27
+#define IRQ_SAA_IT0                     (IRQ_VIC_START+26)
-#define IRQ_SAA_IT1                     28
+#define IRQ_SAA_IT1                     (IRQ_VIC_START+27)
-#define IRQ_UART2                       29
+#define IRQ_UART2                       (IRQ_VIC_START+28)
-#define IRQ_MSP2                        30
+#define IRQ_MSP2                        (IRQ_VIC_START+29)
-#define IRQ_L2CC                        49
+#define IRQ_L2CC                        (IRQ_VIC_START+30)
-#define IRQ_HPI                         50
+#define IRQ_HPI                         (IRQ_VIC_START+31)
-#define IRQ_SKE                         51
+#define IRQ_SKE                         (IRQ_VIC_START+32)
-#define IRQ_KP                          52
+#define IRQ_KP                          (IRQ_VIC_START+33)
-#define IRQ_MEMST                       55
+#define IRQ_MEMST                       (IRQ_VIC_START+34)
-#define IRQ_SGA_IT                      59
+#define IRQ_SGA_IT                      (IRQ_VIC_START+35)
-#define IRQ_USBM                        61
+#define IRQ_USBM                        (IRQ_VIC_START+36)
-#define IRQ_MSP1                        63
+#define IRQ_MSP1                        (IRQ_VIC_START+37)
 #define NOMADIK_GPIO_OFFSET             (IRQ_VIC_START+64)
diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile
index f0e69cbc5baa..222d58c0ae76 100644
--- a/arch/arm/mach-omap1/Makefile
+++ b/arch/arm/mach-omap1/Makefile
@@ -4,7 +4,7 @@
 # Common support
 obj-y := io.o id.o sram-init.o sram.o time.o irq.o mux.o flash.o \
-         serial.o devices.o dma.o
+         serial.o devices.o dma.o fb.o
 obj-y += clock.o clock_data.o opp_data.o reset.o pm_bus.o timer.o
 ifneq ($(CONFIG_SND_OMAP_SOC_MCBSP),)
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index 3d2aa6f30192..2aab761ee68d 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -160,7 +160,7 @@ static struct omap_lcd_config ams_delta_lcd_config __initdata = {
        .ctrl_name      = "internal",
 };
-static struct omap_usb_config ams_delta_usb_config = {
+static struct omap_usb_config ams_delta_usb_config __initdata = {
        .register_host  = 1,
        .hmc_mode       = 16,
        .pins[0]        = 2,
diff --git a/arch/arm/mach-omap1/fb.c b/arch/arm/mach-omap1/fb.c
new file mode 100644
index 000000000000..c770d45c7226
--- /dev/null
+++ b/arch/arm/mach-omap1/fb.c
@@ -0,0 +1,80 @@
+/*
+ * File: arch/arm/plat-omap/fb.c
+ *
+ * Framebuffer device registration for TI OMAP platforms
+ *
+ * Copyright (C) 2006 Nokia Corporation
+ * Author: Imre Deak <imre.deak@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/memblock.h>
+#include <linux/io.h>
+#include <linux/omapfb.h>
+#include <linux/dma-mapping.h>
+#include <asm/mach/map.h>
+#if defined(CONFIG_FB_OMAP) || defined(CONFIG_FB_OMAP_MODULE)
+static bool omapfb_lcd_configured;
+static struct omapfb_platform_data omapfb_config;
+static u64 omap_fb_dma_mask = ~(u32)0;
+static struct platform_device omap_fb_device = {
+        .name           = "omapfb",
+        .id             = -1,
+        .dev = {
+                .dma_mask               = &omap_fb_dma_mask,
+                .coherent_dma_mask      = DMA_BIT_MASK(32),
+                .platform_data          = &omapfb_config,
+        },
+        .num_resources = 0,
+};
+void __init omapfb_set_lcd_config(const struct omap_lcd_config *config)
+{
+        omapfb_config.lcd = *config;
+        omapfb_lcd_configured = true;
+}
+static int __init omap_init_fb(void)
+{
+        /*
+         * If the board file has not set the lcd config with
+         * omapfb_set_lcd_config(), don't bother registering the omapfb device
+         */
+        if (!omapfb_lcd_configured)
+                return 0;
+        return platform_device_register(&omap_fb_device);
+}
+arch_initcall(omap_init_fb);
+#else
+void __init omapfb_set_lcd_config(const struct omap_lcd_config *config)
+{
+}
+#endif
diff --git a/arch/arm/mach-omap1/mailbox.c b/arch/arm/mach-omap1/mailbox.c
index e962926b67bc..efc8f207f6fc 100644
--- a/arch/arm/mach-omap1/mailbox.c
+++ b/arch/arm/mach-omap1/mailbox.c
@@ -142,7 +142,7 @@ static struct omap_mbox mbox_dsp_info = {
 static struct omap_mbox *omap1_mboxes[] = { &mbox_dsp_info, NULL };
-static int __devinit omap1_mbox_probe(struct platform_device *pdev)
+static int omap1_mbox_probe(struct platform_device *pdev)
 {
        struct resource *mem;
        int ret;
@@ -165,7 +165,7 @@ static int __devinit omap1_mbox_probe(struct platform_device *pdev)
        return 0;
 }
-static int __devexit omap1_mbox_remove(struct platform_device *pdev)
+static int omap1_mbox_remove(struct platform_device *pdev)
 {
        omap_mbox_unregister();
        iounmap(mbox_base);
@@ -174,7 +174,7 @@ static int __devexit omap1_mbox_remove(struct platform_device *pdev)
 static struct platform_driver omap1_mbox_driver = {
        .probe  = omap1_mbox_probe,
-        .remove = __devexit_p(omap1_mbox_remove),
+        .remove = omap1_mbox_remove,
        .driver = {
                .name   = "omap-mailbox",
        },
diff --git a/arch/arm/mach-omap1/usb.c b/arch/arm/mach-omap1/usb.c
index 104fed366b8f..1a1db5971cd9 100644
--- a/arch/arm/mach-omap1/usb.c
+++ b/arch/arm/mach-omap1/usb.c
@@ -629,8 +629,14 @@ static void __init omap_1510_usb_init(struct omap_usb_config *config)
 static inline void omap_1510_usb_init(struct omap_usb_config *config) {}
 #endif
-void __init omap1_usb_init(struct omap_usb_config *pdata)
+void __init omap1_usb_init(struct omap_usb_config *_pdata)
 {
+        struct omap_usb_config *pdata;
+        pdata = kmemdup(_pdata, sizeof(*pdata), GFP_KERNEL);
+        if (!pdata)
+                return;
        pdata->usb0_init = omap1_usb0_init;
        pdata->usb1_init = omap1_usb1_init;
        pdata->usb2_init = omap1_usb2_init;
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index a8004f33b7e2..947cafe65aef 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -3,7 +3,7 @@
 #
 # Common support
-obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer.o pm.o \
+obj-y := id.o io.o control.o mux.o devices.o fb.o serial.o gpmc.o timer.o pm.o \
         common.o gpio.o dma.o wd_timer.o display.o i2c.o hdq1w.o omap_hwmod.o \
         omap_device.o sram.o
diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
index ed8240c1a9b9..72e2e7e68357 100644
--- a/arch/arm/mach-omap2/board-omap4panda.c
+++ b/arch/arm/mach-omap2/board-omap4panda.c
@@ -397,6 +397,12 @@ static struct omap_board_mux board_mux[] __initdata = {
                  OMAP_PULL_ENA),
        OMAP4_MUX(ABE_MCBSP1_FSX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+        /* UART2 - BT/FM/GPS shared transport */
+        OMAP4_MUX(UART2_CTS,    OMAP_PIN_INPUT  | OMAP_MUX_MODE0),
+        OMAP4_MUX(UART2_RTS,    OMAP_PIN_OUTPUT | OMAP_MUX_MODE0),
+        OMAP4_MUX(UART2_RX,     OMAP_PIN_INPUT  | OMAP_MUX_MODE0),
+        OMAP4_MUX(UART2_TX,     OMAP_PIN_OUTPUT | OMAP_MUX_MODE0),
        { .reg_offset = OMAP_MUX_TERMINATOR },
 };
diff --git a/arch/arm/mach-omap2/cclock2420_data.c b/arch/arm/mach-omap2/cclock2420_data.c
index 7e5febe456d9..ab7e952d2070 100644
--- a/arch/arm/mach-omap2/cclock2420_data.c
+++ b/arch/arm/mach-omap2/cclock2420_data.c
@@ -1935,6 +1935,8 @@ int __init omap2420_clk_init(void)
                        omap2_init_clk_hw_omap_clocks(c->lk.clk);
        }
+        omap2xxx_clkt_vps_late_init();
        omap2_clk_disable_autoidle_all();
        omap2_clk_enable_init_clocks(enable_init_clks,
diff --git a/arch/arm/mach-omap2/cclock2430_data.c b/arch/arm/mach-omap2/cclock2430_data.c
index eda079b96c6a..eb3dab68d536 100644
--- a/arch/arm/mach-omap2/cclock2430_data.c
+++ b/arch/arm/mach-omap2/cclock2430_data.c
@@ -2050,6 +2050,8 @@ int __init omap2430_clk_init(void)
                        omap2_init_clk_hw_omap_clocks(c->lk.clk);
        }
+        omap2xxx_clkt_vps_late_init();
        omap2_clk_disable_autoidle_all();
        omap2_clk_enable_init_clocks(enable_init_clks,
diff --git a/arch/arm/mach-omap2/cclock3xxx_data.c b/arch/arm/mach-omap2/cclock3xxx_data.c
index bdf39481fbd6..6ef87580c33f 100644
--- a/arch/arm/mach-omap2/cclock3xxx_data.c
+++ b/arch/arm/mach-omap2/cclock3xxx_data.c
@@ -1167,6 +1167,8 @@ static const struct clk_ops emu_src_ck_ops = {
        .recalc_rate    = &omap2_clksel_recalc,
        .get_parent     = &omap2_clksel_find_parent_index,
        .set_parent     = &omap2_clksel_set_parent,
+        .enable         = &omap2_clkops_enable_clkdm,
+        .disable        = &omap2_clkops_disable_clkdm,
 };
 static struct clk emu_src_ck;
diff --git a/arch/arm/mach-omap2/cclock44xx_data.c b/arch/arm/mach-omap2/cclock44xx_data.c
index 5789a5e25563..a2cc046b47f4 100644
--- a/arch/arm/mach-omap2/cclock44xx_data.c
+++ b/arch/arm/mach-omap2/cclock44xx_data.c
@@ -2026,14 +2026,13 @@ int __init omap4xxx_clk_init(void)
         * On OMAP4460 the ABE DPLL fails to turn on if in idle low-power
         * state when turning the ABE clock domain. Workaround this by
         * locking the ABE DPLL on boot.
+         * Lock the ABE DPLL in any case to avoid issues with audio.
         */
-        if (cpu_is_omap446x()) {
+        rc = clk_set_parent(&abe_dpll_refclk_mux_ck, &sys_32k_ck);
-                rc = clk_set_parent(&abe_dpll_refclk_mux_ck, &sys_32k_ck);
+        if (!rc)
-                if (!rc)
+                rc = clk_set_rate(&dpll_abe_ck, OMAP4_DPLL_ABE_DEFFREQ);
-                        rc = clk_set_rate(&dpll_abe_ck, OMAP4_DPLL_ABE_DEFFREQ);
+        if (rc)
-                if (rc)
+                pr_err("%s: failed to configure ABE DPLL!\n", __func__);
-                        pr_err("%s: failed to configure ABE DPLL!\n", __func__);
-        }
        return 0;
 }
diff --git a/arch/arm/mach-omap2/control.h b/arch/arm/mach-omap2/control.h
index 3d944d3263d2..e6c328128a0a 100644
--- a/arch/arm/mach-omap2/control.h
+++ b/arch/arm/mach-omap2/control.h
@@ -234,7 +234,7 @@
 #define OMAP343X_PADCONF_ETK_D14        OMAP343X_PADCONF_ETK(16)
 #define OMAP343X_PADCONF_ETK_D15        OMAP343X_PADCONF_ETK(17)
-/* 34xx GENERAL_WKUP regist offsets */
+/* 34xx GENERAL_WKUP register offsets */
 #define OMAP343X_CONTROL_WKUP_DEBOBSMUX(i) (OMAP343X_CONTROL_GENERAL_WKUP + \
                                                0x008 + (i))
 #define OMAP343X_CONTROL_WKUP_DEBOBS0 (OMAP343X_CONTROL_GENERAL_WKUP + 0x008)
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index 5e304d0719a2..626f3ea3142f 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -639,7 +639,7 @@ static int count_ocp2scp_devices(struct omap_ocp2scp_dev *ocp2scp_dev)
        return cnt;
 }
-static void omap_init_ocp2scp(void)
+static void __init omap_init_ocp2scp(void)
 {
        struct omap_hwmod       *oh;
        struct platform_device  *pdev;
diff --git a/arch/arm/mach-omap2/dpll3xxx.c b/arch/arm/mach-omap2/dpll3xxx.c
index 2bb18838cba9..0a02aab5df67 100644
--- a/arch/arm/mach-omap2/dpll3xxx.c
+++ b/arch/arm/mach-omap2/dpll3xxx.c
@@ -504,8 +504,7 @@ int omap3_noncore_dpll_set_rate(struct clk_hw *hw, unsigned long rate,
                if (!cpu_is_omap44xx() && !cpu_is_omap3630()) {
                        freqsel = _omap3_dpll_compute_freqsel(clk,
                                                dd->last_rounded_n);
-                        if (!freqsel)
+                        WARN_ON(!freqsel);
-                                WARN_ON(1);
                }
                pr_debug("%s: %s: set rate: locking rate to %lu.\n",
diff --git a/arch/arm/mach-omap2/drm.c b/arch/arm/mach-omap2/drm.c
index fce5aa3fff49..2a2cfa88ddbf 100644
--- a/arch/arm/mach-omap2/drm.c
+++ b/arch/arm/mach-omap2/drm.c
@@ -25,9 +25,9 @@
 #include <linux/dma-mapping.h>
 #include <linux/platform_data/omap_drm.h>
+#include "soc.h"
 #include "omap_device.h"
 #include "omap_hwmod.h"
-#include <plat/cpu.h>
 #if defined(CONFIG_DRM_OMAP) || (CONFIG_DRM_OMAP_MODULE)
@@ -57,7 +57,7 @@ static int __init omap_init_drm(void)
                        oh->name);
        }
-        platform_data.omaprev = GET_OMAP_REVISION();
+        platform_data.omaprev = GET_OMAP_TYPE;
        return platform_device_register(&omap_drm_device);
diff --git a/arch/arm/mach-omap2/dss-common.c b/arch/arm/mach-omap2/dss-common.c
index 679a0478644f..4be5cfc81ab8 100644
--- a/arch/arm/mach-omap2/dss-common.c
+++ b/arch/arm/mach-omap2/dss-common.c
@@ -31,8 +31,7 @@
 #include <video/omap-panel-nokia-dsi.h>
 #include <video/omap-panel-picodlp.h>
-#include <plat/cpu.h>
+#include "soc.h"
 #include "dss-common.h"
 #include "mux.h"
diff --git a/arch/arm/plat-omap/fb.c b/arch/arm/mach-omap2/fb.c
index a3367b783fc7..d9bd965f6d07 100644
--- a/arch/arm/plat-omap/fb.c
+++ b/arch/arm/mach-omap2/fb.c
@@ -1,6 +1,4 @@
 /*
- * File: arch/arm/plat-omap/fb.c
- *
 * Framebuffer device registration for TI OMAP platforms
 *
 * Copyright (C) 2006 Nokia Corporation
@@ -33,7 +31,7 @@
 #include <asm/mach/map.h>
-#include <plat/cpu.h>
+#include "soc.h"
 #ifdef CONFIG_OMAP2_VRFB
@@ -94,45 +92,7 @@ static int __init omap_init_vrfb(void)
 arch_initcall(omap_init_vrfb);
 #endif
-#if defined(CONFIG_FB_OMAP) || defined(CONFIG_FB_OMAP_MODULE)
+#if defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE)
-static bool omapfb_lcd_configured;
-static struct omapfb_platform_data omapfb_config;
-static u64 omap_fb_dma_mask = ~(u32)0;
-static struct platform_device omap_fb_device = {
-        .name           = "omapfb",
-        .id             = -1,
-        .dev = {
-                .dma_mask               = &omap_fb_dma_mask,
-                .coherent_dma_mask      = DMA_BIT_MASK(32),
-                .platform_data          = &omapfb_config,
-        },
-        .num_resources = 0,
-};
-void __init omapfb_set_lcd_config(const struct omap_lcd_config *config)
-{
-        omapfb_config.lcd = *config;
-        omapfb_lcd_configured = true;
-}
-static int __init omap_init_fb(void)
-{
-        /*
-         * If the board file has not set the lcd config with
-         * omapfb_set_lcd_config(), don't bother registering the omapfb device
-         */
-        if (!omapfb_lcd_configured)
-                return 0;
-        return platform_device_register(&omap_fb_device);
-}
-arch_initcall(omap_init_fb);
-#elif defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE)
 static u64 omap_fb_dma_mask = ~(u32)0;
 static struct omapfb_platform_data omapfb_config;
@@ -155,10 +115,4 @@ static int __init omap_init_fb(void)
 arch_initcall(omap_init_fb);
-#else
-void __init omapfb_set_lcd_config(const struct omap_lcd_config *config)
-{
-}
 #endif
diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
index 65468f6d7f0e..8033cb747c86 100644
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -744,7 +744,7 @@ static int gpmc_setup_irq(void)
        return request_irq(gpmc_irq, gpmc_handle_irq, 0, "gpmc", NULL);
 }
-static __devexit int gpmc_free_irq(void)
+static int gpmc_free_irq(void)
 {
        int i;
@@ -762,7 +762,7 @@ static __devexit int gpmc_free_irq(void)
        return 0;
 }
-static void __devexit gpmc_mem_exit(void)
+static void gpmc_mem_exit(void)
 {
        int cs;
@@ -774,7 +774,7 @@ static void __devexit gpmc_mem_exit(void)
 }
-static int __devinit gpmc_mem_init(void)
+static int gpmc_mem_init(void)
 {
        int cs, rc;
        unsigned long boot_rom_space = 0;
@@ -1121,7 +1121,7 @@ int gpmc_calc_timings(struct gpmc_timings *gpmc_t,
        return 0;
 }
-static __devinit int gpmc_probe(struct platform_device *pdev)
+static int gpmc_probe(struct platform_device *pdev)
 {
        int rc;
        u32 l;
@@ -1177,7 +1177,7 @@ static __devinit int gpmc_probe(struct platform_device *pdev)
        return 0;
 }
-static __devexit int gpmc_remove(struct platform_device *pdev)
+static int gpmc_remove(struct platform_device *pdev)
 {
        gpmc_free_irq();
        gpmc_mem_exit();
@@ -1187,7 +1187,7 @@ static __devexit int gpmc_remove(struct platform_device *pdev)
 static struct platform_driver gpmc_driver = {
        .probe          = gpmc_probe,
-        .remove         = __devexit_p(gpmc_remove),
+        .remove         = gpmc_remove,
        .driver         = {
                .name   = DEVICE_NAME,
                .owner  = THIS_MODULE,
diff --git a/arch/arm/mach-omap2/mailbox.c b/arch/arm/mach-omap2/mailbox.c
index 0d974565f8ca..0b080267b7f6 100644
--- a/arch/arm/mach-omap2/mailbox.c
+++ b/arch/arm/mach-omap2/mailbox.c
@@ -342,7 +342,7 @@ struct omap_mbox mbox_2_info = {
 struct omap_mbox *omap4_mboxes[] = { &mbox_1_info, &mbox_2_info, NULL };
 #endif
-static int __devinit omap2_mbox_probe(struct platform_device *pdev)
+static int omap2_mbox_probe(struct platform_device *pdev)
 {
        struct resource *mem;
        int ret;
@@ -395,7 +395,7 @@ static int __devinit omap2_mbox_probe(struct platform_device *pdev)
        return 0;
 }
-static int __devexit omap2_mbox_remove(struct platform_device *pdev)
+static int omap2_mbox_remove(struct platform_device *pdev)
 {
        omap_mbox_unregister();
        iounmap(mbox_base);
@@ -404,7 +404,7 @@ static int __devexit omap2_mbox_remove(struct platform_device *pdev)
 static struct platform_driver omap2_mbox_driver = {
        .probe = omap2_mbox_probe,
-        .remove = __devexit_p(omap2_mbox_remove),
+        .remove = omap2_mbox_remove,
        .driver = {
                .name = "omap-mailbox",
        },
diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
index 081c71edddf4..646c14d9fdb9 100644
--- a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
@@ -2070,7 +2070,7 @@ static struct omap_hwmod_irq_info am33xx_usbss_mpu_irqs[] = {
        { .name = "usbss-irq", .irq = 17 + OMAP_INTC_START, },
        { .name = "musb0-irq", .irq = 18 + OMAP_INTC_START, },
        { .name = "musb1-irq", .irq = 19 + OMAP_INTC_START, },
-        { .irq = -1 + OMAP_INTC_START, },
+        { .irq = -1, },
 };
 static struct omap_hwmod am33xx_usbss_hwmod = {
@@ -2515,7 +2515,7 @@ static struct omap_hwmod_ocp_if am33xx_l4_hs__cpgmac0 = {
        .user           = OCP_USER_MPU,
 };
-struct omap_hwmod_addr_space am33xx_mdio_addr_space[] = {
+static struct omap_hwmod_addr_space am33xx_mdio_addr_space[] = {
        {
                .pa_start       = 0x4A101000,
                .pa_end         = 0x4A101000 + SZ_256 - 1,
@@ -2523,7 +2523,7 @@ struct omap_hwmod_addr_space am33xx_mdio_addr_space[] = {
        { }
 };
-struct omap_hwmod_ocp_if am33xx_cpgmac0__mdio = {
+static struct omap_hwmod_ocp_if am33xx_cpgmac0__mdio = {
        .master         = &am33xx_cpgmac0_hwmod,
        .slave          = &am33xx_mdio_hwmod,
        .addr           = am33xx_mdio_addr_space,
diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index f9fab942d5ba..793f54ac7d14 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -26,7 +26,6 @@
 #include <linux/omap-dma.h>
-#include <linux/platform_data/omap_ocp2scp.h>
 #include <linux/platform_data/spi-omap2-mcspi.h>
 #include <linux/platform_data/asoc-ti-mcbsp.h>
 #include <linux/platform_data/iommu-omap.h>
@@ -2133,8 +2132,12 @@ static struct omap_hwmod omap44xx_mcpdm_hwmod = {
         * currently reset very early during boot, before I2C is
         * available, so it doesn't seem that we have any choice in
         * the kernel other than to avoid resetting it.
+         *
+         * Also, McPDM needs to be configured to NO_IDLE mode when it
+         * is in used otherwise vital clocks will be gated which
+         * results 'slow motion' audio playback.
         */
-        .flags          = HWMOD_EXT_OPT_MAIN_CLK,
+        .flags          = HWMOD_EXT_OPT_MAIN_CLK | HWMOD_SWSUP_SIDLE,
        .mpu_irqs       = omap44xx_mcpdm_irqs,
        .sdma_reqs      = omap44xx_mcpdm_sdma_reqs,
        .main_clk       = "mcpdm_fck",
diff --git a/arch/arm/mach-omap2/omap_twl.c b/arch/arm/mach-omap2/omap_twl.c
index fefd40166624..615e5b1fb025 100644
--- a/arch/arm/mach-omap2/omap_twl.c
+++ b/arch/arm/mach-omap2/omap_twl.c
@@ -292,8 +292,8 @@ int __init omap3_twl_set_sr_bit(bool enable)
        if (twl_sr_enable_autoinit)
                pr_warning("%s: unexpected multiple calls\n", __func__);
-        ret = twl_i2c_read_u8(TWL4030_MODULE_PM_RECEIVER, &temp,
+        ret = twl_i2c_read_u8(TWL_MODULE_PM_RECEIVER, &temp,
-                                        TWL4030_DCDC_GLOBAL_CFG);
+                              TWL4030_DCDC_GLOBAL_CFG);
        if (ret)
                goto err;
@@ -302,8 +302,8 @@ int __init omap3_twl_set_sr_bit(bool enable)
        else
                temp &= ~SMARTREFLEX_ENABLE;
-        ret = twl_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, temp,
+        ret = twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, temp,
-                                TWL4030_DCDC_GLOBAL_CFG);
+                               TWL4030_DCDC_GLOBAL_CFG);
        if (!ret) {
                twl_sr_enable_autoinit = true;
                return 0;
diff --git a/arch/arm/mach-omap2/pmu.c b/arch/arm/mach-omap2/pmu.c
index 250d909e38bd..eb78ae7a3464 100644
--- a/arch/arm/mach-omap2/pmu.c
+++ b/arch/arm/mach-omap2/pmu.c
@@ -11,8 +11,6 @@
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 */
-#include <linux/pm_runtime.h>
 #include <asm/pmu.h>
 #include "soc.h"
diff --git a/arch/arm/mach-omap2/prm2xxx.c b/arch/arm/mach-omap2/prm2xxx.c
index faeab18696df..418de9c3b319 100644
--- a/arch/arm/mach-omap2/prm2xxx.c
+++ b/arch/arm/mach-omap2/prm2xxx.c
@@ -18,9 +18,8 @@
 #include <linux/io.h>
 #include <linux/irq.h>
+#include "soc.h"
 #include "common.h"
-#include <plat/cpu.h>
 #include "vp.h"
 #include "powerdomain.h"
 #include "clockdomain.h"
@@ -29,6 +28,14 @@
 #include "prm-regbits-24xx.h"
 /*
+ * OMAP24xx PM_PWSTCTRL_*.POWERSTATE and PM_PWSTST_*.LASTSTATEENTERED bits -
+ * these are reversed from the bits used on OMAP3+
+ */
+#define OMAP24XX_PWRDM_POWER_ON                 0x0
+#define OMAP24XX_PWRDM_POWER_RET                0x1
+#define OMAP24XX_PWRDM_POWER_OFF                0x3
+/*
 * omap2xxx_prm_reset_src_map - map from bits in the PRM_RSTST_WKUP
 *   hardware register (which are specific to the OMAP2xxx SoCs) to
 *   reset source ID bit shifts (which is an OMAP SoC-independent
@@ -69,6 +76,34 @@ static u32 omap2xxx_prm_read_reset_sources(void)
 }
 /**
+ * omap2xxx_pwrst_to_common_pwrst - convert OMAP2xxx pwrst to common pwrst
+ * @omap2xxx_pwrst: OMAP2xxx hardware power state to convert
+ *
+ * Return the common power state bits corresponding to the OMAP2xxx
+ * hardware power state bits @omap2xxx_pwrst, or -EINVAL upon error.
+ */
+static int omap2xxx_pwrst_to_common_pwrst(u8 omap2xxx_pwrst)
+{
+        u8 pwrst;
+        switch (omap2xxx_pwrst) {
+        case OMAP24XX_PWRDM_POWER_OFF:
+                pwrst = PWRDM_POWER_OFF;
+                break;
+        case OMAP24XX_PWRDM_POWER_RET:
+                pwrst = PWRDM_POWER_RET;
+                break;
+        case OMAP24XX_PWRDM_POWER_ON:
+                pwrst = PWRDM_POWER_ON;
+                break;
+        default:
+                return -EINVAL;
+        }
+        return pwrst;
+}
+/**
 * omap2xxx_prm_dpll_reset - use DPLL reset to reboot the OMAP SoC
 *
 * Set the DPLL reset bit, which should reboot the SoC.  This is the
@@ -98,10 +133,56 @@ int omap2xxx_clkdm_wakeup(struct clockdomain *clkdm)
        return 0;
 }
+static int omap2xxx_pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst)
+{
+        u8 omap24xx_pwrst;
+        switch (pwrst) {
+        case PWRDM_POWER_OFF:
+                omap24xx_pwrst = OMAP24XX_PWRDM_POWER_OFF;
+                break;
+        case PWRDM_POWER_RET:
+                omap24xx_pwrst = OMAP24XX_PWRDM_POWER_RET;
+                break;
+        case PWRDM_POWER_ON:
+                omap24xx_pwrst = OMAP24XX_PWRDM_POWER_ON;
+                break;
+        default:
+                return -EINVAL;
+        }
+        omap2_prm_rmw_mod_reg_bits(OMAP_POWERSTATE_MASK,
+                                   (omap24xx_pwrst << OMAP_POWERSTATE_SHIFT),
+                                   pwrdm->prcm_offs, OMAP2_PM_PWSTCTRL);
+        return 0;
+}
+static int omap2xxx_pwrdm_read_next_pwrst(struct powerdomain *pwrdm)
+{
+        u8 omap2xxx_pwrst;
+        omap2xxx_pwrst = omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
+                                                       OMAP2_PM_PWSTCTRL,
+                                                       OMAP_POWERSTATE_MASK);
+        return omap2xxx_pwrst_to_common_pwrst(omap2xxx_pwrst);
+}
+static int omap2xxx_pwrdm_read_pwrst(struct powerdomain *pwrdm)
+{
+        u8 omap2xxx_pwrst;
+        omap2xxx_pwrst = omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
+                                                       OMAP2_PM_PWSTST,
+                                                       OMAP_POWERSTATEST_MASK);
+        return omap2xxx_pwrst_to_common_pwrst(omap2xxx_pwrst);
+}
 struct pwrdm_ops omap2_pwrdm_operations = {
-        .pwrdm_set_next_pwrst   = omap2_pwrdm_set_next_pwrst,
+        .pwrdm_set_next_pwrst   = omap2xxx_pwrdm_set_next_pwrst,
-        .pwrdm_read_next_pwrst  = omap2_pwrdm_read_next_pwrst,
+        .pwrdm_read_next_pwrst  = omap2xxx_pwrdm_read_next_pwrst,
-        .pwrdm_read_pwrst       = omap2_pwrdm_read_pwrst,
+        .pwrdm_read_pwrst       = omap2xxx_pwrdm_read_pwrst,
        .pwrdm_set_logic_retst  = omap2_pwrdm_set_logic_retst,
        .pwrdm_set_mem_onst     = omap2_pwrdm_set_mem_onst,
        .pwrdm_set_mem_retst    = omap2_pwrdm_set_mem_retst,
diff --git a/arch/arm/mach-omap2/prm2xxx_3xxx.c b/arch/arm/mach-omap2/prm2xxx_3xxx.c
index 30517f5af707..a3e121f94a86 100644
--- a/arch/arm/mach-omap2/prm2xxx_3xxx.c
+++ b/arch/arm/mach-omap2/prm2xxx_3xxx.c
@@ -103,28 +103,6 @@ int omap2_prm_deassert_hardreset(s16 prm_mod, u8 rst_shift, u8 st_shift)
 /* Powerdomain low-level functions */
 /* Common functions across OMAP2 and OMAP3 */
-int omap2_pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst)
-{
-        omap2_prm_rmw_mod_reg_bits(OMAP_POWERSTATE_MASK,
-                                   (pwrst << OMAP_POWERSTATE_SHIFT),
-                                   pwrdm->prcm_offs, OMAP2_PM_PWSTCTRL);
-        return 0;
-}
-int omap2_pwrdm_read_next_pwrst(struct powerdomain *pwrdm)
-{
-        return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
-                                             OMAP2_PM_PWSTCTRL,
-                                             OMAP_POWERSTATE_MASK);
-}
-int omap2_pwrdm_read_pwrst(struct powerdomain *pwrdm)
-{
-        return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
-                                             OMAP2_PM_PWSTST,
-                                             OMAP_POWERSTATEST_MASK);
-}
 int omap2_pwrdm_set_mem_onst(struct powerdomain *pwrdm, u8 bank,
                                                                u8 pwrst)
 {
diff --git a/arch/arm/mach-omap2/prm3xxx.c b/arch/arm/mach-omap2/prm3xxx.c
index db198d058584..e648bd55b072 100644
--- a/arch/arm/mach-omap2/prm3xxx.c
+++ b/arch/arm/mach-omap2/prm3xxx.c
@@ -18,9 +18,8 @@
 #include <linux/io.h>
 #include <linux/irq.h>
+#include "soc.h"
 #include "common.h"
-#include <plat/cpu.h>
 #include "vp.h"
 #include "powerdomain.h"
 #include "prm3xxx.h"
@@ -278,6 +277,28 @@ static u32 omap3xxx_prm_read_reset_sources(void)
 /* Powerdomain low-level functions */
+static int omap3_pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst)
+{
+        omap2_prm_rmw_mod_reg_bits(OMAP_POWERSTATE_MASK,
+                                   (pwrst << OMAP_POWERSTATE_SHIFT),
+                                   pwrdm->prcm_offs, OMAP2_PM_PWSTCTRL);
+        return 0;
+}
+static int omap3_pwrdm_read_next_pwrst(struct powerdomain *pwrdm)
+{
+        return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
+                                             OMAP2_PM_PWSTCTRL,
+                                             OMAP_POWERSTATE_MASK);
+}
+static int omap3_pwrdm_read_pwrst(struct powerdomain *pwrdm)
+{
+        return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
+                                             OMAP2_PM_PWSTST,
+                                             OMAP_POWERSTATEST_MASK);
+}
 /* Applicable only for OMAP3. Not supported on OMAP2 */
 static int omap3_pwrdm_read_prev_pwrst(struct powerdomain *pwrdm)
 {
@@ -356,9 +377,9 @@ static int omap3_pwrdm_disable_hdwr_sar(struct powerdomain *pwrdm)
 }
 struct pwrdm_ops omap3_pwrdm_operations = {
-        .pwrdm_set_next_pwrst   = omap2_pwrdm_set_next_pwrst,
+        .pwrdm_set_next_pwrst   = omap3_pwrdm_set_next_pwrst,
-        .pwrdm_read_next_pwrst  = omap2_pwrdm_read_next_pwrst,
+        .pwrdm_read_next_pwrst  = omap3_pwrdm_read_next_pwrst,
-        .pwrdm_read_pwrst       = omap2_pwrdm_read_pwrst,
+        .pwrdm_read_pwrst       = omap3_pwrdm_read_pwrst,
        .pwrdm_read_prev_pwrst  = omap3_pwrdm_read_prev_pwrst,
        .pwrdm_set_logic_retst  = omap2_pwrdm_set_logic_retst,
        .pwrdm_read_logic_pwrst = omap3_pwrdm_read_logic_pwrst,
diff --git a/arch/arm/mach-omap2/prm44xx.c b/arch/arm/mach-omap2/prm44xx.c
index 7498bc77fe8b..c05a343d465d 100644
--- a/arch/arm/mach-omap2/prm44xx.c
+++ b/arch/arm/mach-omap2/prm44xx.c
@@ -56,9 +56,9 @@ static struct omap_prcm_irq_setup omap4_prcm_irq_setup = {
 *   enumeration)
 */
 static struct prm_reset_src_map omap44xx_prm_reset_src_map[] = {
-        { OMAP4430_RST_GLOBAL_WARM_SW_SHIFT,
+        { OMAP4430_GLOBAL_WARM_SW_RST_SHIFT,
          OMAP_GLOBAL_WARM_RST_SRC_ID_SHIFT },
-        { OMAP4430_RST_GLOBAL_COLD_SW_SHIFT,
+        { OMAP4430_GLOBAL_COLD_RST_SHIFT,
          OMAP_GLOBAL_COLD_RST_SRC_ID_SHIFT },
        { OMAP4430_MPU_SECURITY_VIOL_RST_SHIFT,
          OMAP_SECU_VIOL_RST_SRC_ID_SHIFT },
@@ -333,7 +333,7 @@ static u32 omap44xx_prm_read_reset_sources(void)
        u32 r = 0;
        u32 v;
-        v = omap4_prm_read_inst_reg(OMAP4430_PRM_OCP_SOCKET_INST,
+        v = omap4_prm_read_inst_reg(OMAP4430_PRM_DEVICE_INST,
                                    OMAP4_RM_RSTST);
        p = omap44xx_prm_reset_src_map;
diff --git a/arch/arm/mach-omap2/prm44xx.h b/arch/arm/mach-omap2/prm44xx.h
index 22b0979206ca..8ee1fbdec561 100644
--- a/arch/arm/mach-omap2/prm44xx.h
+++ b/arch/arm/mach-omap2/prm44xx.h
@@ -62,8 +62,8 @@
 /* OMAP4 specific register offsets */
 #define OMAP4_RM_RSTCTRL                                0x0000
-#define OMAP4_RM_RSTTIME                                0x0004
+#define OMAP4_RM_RSTST                                  0x0004
-#define OMAP4_RM_RSTST                                  0x0008
+#define OMAP4_RM_RSTTIME                                0x0008
 #define OMAP4_PM_PWSTCTRL                               0x0000
 #define OMAP4_PM_PWSTST                                 0x0004
diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c
index 5975a42e16d4..afaeff4920ab 100644
--- a/arch/arm/mach-omap2/timer.c
+++ b/arch/arm/mach-omap2/timer.c
@@ -165,15 +165,11 @@ static struct device_node * __init omap_get_timer_dt(struct of_device_id *match,
        struct device_node *np;
        for_each_matching_node(np, match) {
-                if (!of_device_is_available(np)) {
+                if (!of_device_is_available(np))
-                        of_node_put(np);
                        continue;
-                }
-                if (property && !of_get_property(np, property, NULL)) {
+                if (property && !of_get_property(np, property, NULL))
-                        of_node_put(np);
                        continue;
-                }
                of_add_property(np, &device_disabled);
                return np;
diff --git a/arch/arm/mach-orion5x/pci.c b/arch/arm/mach-orion5x/pci.c
index cd50e328db2a..d9c7c3bf0d9c 100644
--- a/arch/arm/mach-orion5x/pci.c
+++ b/arch/arm/mach-orion5x/pci.c
@@ -506,7 +506,7 @@ static int __init pci_setup(struct pci_sys_data *sys)
 /*****************************************************************************
 * General PCIe + PCI
 ****************************************************************************/
-static void __devinit rc_pci_fixup(struct pci_dev *dev)
+static void rc_pci_fixup(struct pci_dev *dev)
 {
        /*
         * Prevent enumeration of root complex.
diff --git a/arch/arm/mach-prima2/pm.c b/arch/arm/mach-prima2/pm.c
index fb5a7910af35..9936c180bf01 100644
--- a/arch/arm/mach-prima2/pm.c
+++ b/arch/arm/mach-prima2/pm.c
@@ -123,7 +123,7 @@ static const struct of_device_id memc_ids[] = {
        {}
 };
-static int __devinit sirfsoc_memc_probe(struct platform_device *op)
+static int sirfsoc_memc_probe(struct platform_device *op)
 {
        struct device_node *np = op->dev.of_node;
diff --git a/arch/arm/mach-prima2/rtciobrg.c b/arch/arm/mach-prima2/rtciobrg.c
index 9d80f1e20a98..557353602130 100644
--- a/arch/arm/mach-prima2/rtciobrg.c
+++ b/arch/arm/mach-prima2/rtciobrg.c
@@ -107,7 +107,7 @@ static const struct of_device_id rtciobrg_ids[] = {
        {}
 };
-static int __devinit sirfsoc_rtciobrg_probe(struct platform_device *op)
+static int sirfsoc_rtciobrg_probe(struct platform_device *op)
 {
        struct device_node *np = op->dev.of_node;
diff --git a/arch/arm/mach-pxa/corgi_pm.c b/arch/arm/mach-pxa/corgi_pm.c
index 048c4299473c..7a39efc50865 100644
--- a/arch/arm/mach-pxa/corgi_pm.c
+++ b/arch/arm/mach-pxa/corgi_pm.c
@@ -198,7 +198,7 @@ static struct sharpsl_charger_machinfo corgi_pm_machinfo = {
 static struct platform_device *corgipm_device;
-static int __devinit corgipm_init(void)
+static int corgipm_init(void)
 {
        int ret;
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h b/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h
index a611ad3153c7..b6132aa95dc0 100644
--- a/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h
@@ -463,6 +463,9 @@
        GPIO76_LCD_PCLK,        \
        GPIO77_LCD_BIAS
+/* these enable a work-around for a hw bug in pxa27x during ac97 warm reset */
+#define GPIO113_AC97_nRESET_GPIO_HIGH MFP_CFG_OUT(GPIO113, AF0, DEFAULT)
+#define GPIO95_AC97_nRESET_GPIO_HIGH MFP_CFG_OUT(GPIO95, AF0, DEFAULT)
 extern int keypad_set_wake(unsigned int on);
 #endif /* __ASM_ARCH_MFP_PXA27X_H */
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index 8047ee0effc5..616cb87b6179 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -47,9 +47,9 @@ void pxa27x_clear_otgph(void)
 EXPORT_SYMBOL(pxa27x_clear_otgph);
 static unsigned long ac97_reset_config[] = {
-        GPIO113_GPIO,
+        GPIO113_AC97_nRESET_GPIO_HIGH,
        GPIO113_AC97_nRESET,
-        GPIO95_GPIO,
+        GPIO95_AC97_nRESET_GPIO_HIGH,
        GPIO95_AC97_nRESET,
 };
diff --git a/arch/arm/mach-pxa/sharpsl_pm.c b/arch/arm/mach-pxa/sharpsl_pm.c
index ec55c575ed19..0a36d3585f26 100644
--- a/arch/arm/mach-pxa/sharpsl_pm.c
+++ b/arch/arm/mach-pxa/sharpsl_pm.c
@@ -829,7 +829,7 @@ static const struct platform_suspend_ops sharpsl_pm_ops = {
 };
 #endif
-static int __devinit sharpsl_pm_probe(struct platform_device *pdev)
+static int sharpsl_pm_probe(struct platform_device *pdev)
 {
        int ret, irq;
@@ -941,7 +941,7 @@ static struct platform_driver sharpsl_pm_driver = {
        },
 };
-static int __devinit sharpsl_pm_init(void)
+static int sharpsl_pm_init(void)
 {
        return platform_driver_register(&sharpsl_pm_driver);
 }
diff --git a/arch/arm/mach-pxa/spitz_pm.c b/arch/arm/mach-pxa/spitz_pm.c
index 842596d4d31e..e191f9996b26 100644
--- a/arch/arm/mach-pxa/spitz_pm.c
+++ b/arch/arm/mach-pxa/spitz_pm.c
@@ -232,7 +232,7 @@ struct sharpsl_charger_machinfo spitz_pm_machinfo = {
 static struct platform_device *spitzpm_device;
-static int __devinit spitzpm_init(void)
+static int spitzpm_init(void)
 {
        int ret;
diff --git a/arch/arm/mach-pxa/tosa-bt.c b/arch/arm/mach-pxa/tosa-bt.c
index b9b1e5c2b290..fc3646c2c694 100644
--- a/arch/arm/mach-pxa/tosa-bt.c
+++ b/arch/arm/mach-pxa/tosa-bt.c
@@ -102,7 +102,7 @@ err_reset:
        return rc;
 }
-static int __devexit tosa_bt_remove(struct platform_device *dev)
+static int tosa_bt_remove(struct platform_device *dev)
 {
        struct tosa_bt_data *data = dev->dev.platform_data;
        struct rfkill *rfk = platform_get_drvdata(dev);
@@ -125,7 +125,7 @@ static int __devexit tosa_bt_remove(struct platform_device *dev)
 static struct platform_driver tosa_bt_driver = {
        .probe = tosa_bt_probe,
-        .remove = __devexit_p(tosa_bt_remove),
+        .remove = tosa_bt_remove,
        .driver = {
                .name = "tosa-bt",
diff --git a/arch/arm/mach-s3c24xx/h1940-bluetooth.c b/arch/arm/mach-s3c24xx/h1940-bluetooth.c
index 57aee916bdb1..3f40c61b6e02 100644
--- a/arch/arm/mach-s3c24xx/h1940-bluetooth.c
+++ b/arch/arm/mach-s3c24xx/h1940-bluetooth.c
@@ -62,7 +62,7 @@ static const struct rfkill_ops h1940bt_rfkill_ops = {
        .set_block = h1940bt_set_block,
 };
-static int __devinit h1940bt_probe(struct platform_device *pdev)
+static int h1940bt_probe(struct platform_device *pdev)
 {
        struct rfkill *rfk;
        int ret = 0;
diff --git a/arch/arm/mach-s3c24xx/mach-osiris-dvs.c b/arch/arm/mach-s3c24xx/mach-osiris-dvs.c
index 5876c6ba7500..45e74363aaa9 100644
--- a/arch/arm/mach-s3c24xx/mach-osiris-dvs.c
+++ b/arch/arm/mach-s3c24xx/mach-osiris-dvs.c
@@ -93,7 +93,7 @@ static struct notifier_block osiris_dvs_nb = {
        .notifier_call  = osiris_dvs_notify,
 };
-static int __devinit osiris_dvs_probe(struct platform_device *pdev)
+static int osiris_dvs_probe(struct platform_device *pdev)
 {
        int ret;
@@ -126,7 +126,7 @@ err_nogpio:
        return ret;
 }
-static int __devexit osiris_dvs_remove(struct platform_device *pdev)
+static int osiris_dvs_remove(struct platform_device *pdev)
 {
        dev_info(&pdev->dev, "exiting\n");
@@ -167,7 +167,7 @@ static const struct dev_pm_ops osiris_dvs_pm = {
 static struct platform_driver osiris_dvs_driver = {
        .probe          = osiris_dvs_probe,
-        .remove         = __devexit_p(osiris_dvs_remove),
+        .remove         = osiris_dvs_remove,
        .driver         = {
                .name   = "osiris-dvs",
                .owner  = THIS_MODULE,
diff --git a/arch/arm/mach-s3c64xx/mach-crag6410-module.c b/arch/arm/mach-s3c64xx/mach-crag6410-module.c
index c6d8dba90623..755c0bb119f4 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410-module.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410-module.c
@@ -47,7 +47,7 @@ static struct spi_board_info wm1253_devs[] = {
                .bus_num        = 0,
                .chip_select    = 0,
                .mode           = SPI_MODE_0,
-                .irq            = S3C_EINT(5),
+                .irq            = S3C_EINT(4),
                .controller_data = &wm0010_spi_csinfo,
                .platform_data = &wm0010_pdata,
        },
@@ -290,7 +290,7 @@ static const struct i2c_board_info wm2200_i2c[] = {
          .platform_data = &wm2200_pdata, },
 };
-static __devinitdata const struct {
+static const struct {
        u8 id;
        u8 rev;
        const char *name;
@@ -343,8 +343,8 @@ static __devinitdata const struct {
          .i2c_devs = wm2200_i2c, .num_i2c_devs = ARRAY_SIZE(wm2200_i2c) },
 };
-static __devinit int wlf_gf_module_probe(struct i2c_client *i2c,
+static int wlf_gf_module_probe(struct i2c_client *i2c,
-                                         const struct i2c_device_id *i2c_id)
+                               const struct i2c_device_id *i2c_id)
 {
        int ret, i, j, id, rev;
diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c
index 87aab127dd60..053dbcbeaa73 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410.c
@@ -171,7 +171,7 @@ static struct fb_videomode crag6410_lcd_timing = {
 };
 /* 405566 clocks per frame => 60Hz refresh requires 24333960Hz clock */
-static struct s3c_fb_platdata crag6410_lcd_pdata __devinitdata = {
+static struct s3c_fb_platdata crag6410_lcd_pdata = {
        .setup_gpio     = s3c64xx_fb_gpio_setup_24bpp,
        .vtiming        = &crag6410_lcd_timing,
        .win[0]         = &crag6410_fb_win0,
@@ -181,7 +181,7 @@ static struct s3c_fb_platdata crag6410_lcd_pdata __devinitdata = {
 /* 2x6 keypad */
-static uint32_t crag6410_keymap[] __devinitdata = {
+static uint32_t crag6410_keymap[] = {
        /* KEY(row, col, keycode) */
        KEY(0, 0, KEY_VOLUMEUP),
        KEY(0, 1, KEY_HOME),
@@ -197,12 +197,12 @@ static uint32_t crag6410_keymap[] __devinitdata = {
        KEY(1, 5, KEY_CAMERA),
 };
-static struct matrix_keymap_data crag6410_keymap_data __devinitdata = {
+static struct matrix_keymap_data crag6410_keymap_data = {
        .keymap         = crag6410_keymap,
        .keymap_size    = ARRAY_SIZE(crag6410_keymap),
 };
-static struct samsung_keypad_platdata crag6410_keypad_data __devinitdata = {
+static struct samsung_keypad_platdata crag6410_keypad_data = {
        .keymap_data    = &crag6410_keymap_data,
        .rows           = 2,
        .cols           = 6,
@@ -407,11 +407,11 @@ static struct wm831x_buckv_pdata vddarm_pdata = {
        .dvs_gpio = S3C64XX_GPK(0),
 };
-static struct regulator_consumer_supply vddarm_consumers[] __devinitdata = {
+static struct regulator_consumer_supply vddarm_consumers[] = {
        REGULATOR_SUPPLY("vddarm", NULL),
 };
-static struct regulator_init_data vddarm __devinitdata = {
+static struct regulator_init_data vddarm = {
        .constraints = {
                .name = "VDDARM",
                .min_uV = 1000000,
@@ -425,11 +425,11 @@ static struct regulator_init_data vddarm __devinitdata = {
        .driver_data = &vddarm_pdata,
 };
-static struct regulator_consumer_supply vddint_consumers[] __devinitdata = {
+static struct regulator_consumer_supply vddint_consumers[] = {
        REGULATOR_SUPPLY("vddint", NULL),
 };
-static struct regulator_init_data vddint __devinitdata = {
+static struct regulator_init_data vddint = {
        .constraints = {
                .name = "VDDINT",
                .min_uV = 1000000,
@@ -442,27 +442,27 @@ static struct regulator_init_data vddint __devinitdata = {
        .supply_regulator = "WALLVDD",
 };
-static struct regulator_init_data vddmem __devinitdata = {
+static struct regulator_init_data vddmem = {
        .constraints = {
                .name = "VDDMEM",
                .always_on = 1,
        },
 };
-static struct regulator_init_data vddsys __devinitdata = {
+static struct regulator_init_data vddsys = {
        .constraints = {
                .name = "VDDSYS,VDDEXT,VDDPCM,VDDSS",
                .always_on = 1,
        },
 };
-static struct regulator_consumer_supply vddmmc_consumers[] __devinitdata = {
+static struct regulator_consumer_supply vddmmc_consumers[] = {
        REGULATOR_SUPPLY("vmmc", "s3c-sdhci.0"),
        REGULATOR_SUPPLY("vmmc", "s3c-sdhci.1"),
        REGULATOR_SUPPLY("vmmc", "s3c-sdhci.2"),
 };
-static struct regulator_init_data vddmmc __devinitdata = {
+static struct regulator_init_data vddmmc = {
        .constraints = {
                .name = "VDDMMC,UH",
                .always_on = 1,
@@ -472,7 +472,7 @@ static struct regulator_init_data vddmmc __devinitdata = {
        .supply_regulator = "WALLVDD",
 };
-static struct regulator_init_data vddotgi __devinitdata = {
+static struct regulator_init_data vddotgi = {
        .constraints = {
                .name = "VDDOTGi",
                .always_on = 1,
@@ -480,7 +480,7 @@ static struct regulator_init_data vddotgi __devinitdata = {
        .supply_regulator = "WALLVDD",
 };
-static struct regulator_init_data vddotg __devinitdata = {
+static struct regulator_init_data vddotg = {
        .constraints = {
                .name = "VDDOTG",
                .always_on = 1,
@@ -488,7 +488,7 @@ static struct regulator_init_data vddotg __devinitdata = {
        .supply_regulator = "WALLVDD",
 };
-static struct regulator_init_data vddhi __devinitdata = {
+static struct regulator_init_data vddhi = {
        .constraints = {
                .name = "VDDHI",
                .always_on = 1,
@@ -496,7 +496,7 @@ static struct regulator_init_data vddhi __devinitdata = {
        .supply_regulator = "WALLVDD",
 };
-static struct regulator_init_data vddadc __devinitdata = {
+static struct regulator_init_data vddadc = {
        .constraints = {
                .name = "VDDADC,VDDDAC",
                .always_on = 1,
@@ -504,7 +504,7 @@ static struct regulator_init_data vddadc __devinitdata = {
        .supply_regulator = "WALLVDD",
 };
-static struct regulator_init_data vddmem0 __devinitdata = {
+static struct regulator_init_data vddmem0 = {
        .constraints = {
                .name = "VDDMEM0",
                .always_on = 1,
@@ -512,7 +512,7 @@ static struct regulator_init_data vddmem0 __devinitdata = {
        .supply_regulator = "WALLVDD",
 };
-static struct regulator_init_data vddpll __devinitdata = {
+static struct regulator_init_data vddpll = {
        .constraints = {
                .name = "VDDPLL",
                .always_on = 1,
@@ -520,7 +520,7 @@ static struct regulator_init_data vddpll __devinitdata = {
        .supply_regulator = "WALLVDD",
 };
-static struct regulator_init_data vddlcd __devinitdata = {
+static struct regulator_init_data vddlcd = {
        .constraints = {
                .name = "VDDLCD",
                .always_on = 1,
@@ -528,7 +528,7 @@ static struct regulator_init_data vddlcd __devinitdata = {
        .supply_regulator = "WALLVDD",
 };
-static struct regulator_init_data vddalive __devinitdata = {
+static struct regulator_init_data vddalive = {
        .constraints = {
                .name = "VDDALIVE",
                .always_on = 1,
@@ -536,28 +536,28 @@ static struct regulator_init_data vddalive __devinitdata = {
        .supply_regulator = "WALLVDD",
 };
-static struct wm831x_backup_pdata banff_backup_pdata __devinitdata = {
+static struct wm831x_backup_pdata banff_backup_pdata = {
        .charger_enable = 1,
        .vlim = 2500,  /* mV */
        .ilim = 200,   /* uA */
 };
-static struct wm831x_status_pdata banff_red_led __devinitdata = {
+static struct wm831x_status_pdata banff_red_led = {
        .name = "banff:red:",
        .default_src = WM831X_STATUS_MANUAL,
 };
-static struct wm831x_status_pdata banff_green_led __devinitdata = {
+static struct wm831x_status_pdata banff_green_led = {
        .name = "banff:green:",
        .default_src = WM831X_STATUS_MANUAL,
 };
-static struct wm831x_touch_pdata touch_pdata __devinitdata = {
+static struct wm831x_touch_pdata touch_pdata = {
        .data_irq = S3C_EINT(26),
        .pd_irq = S3C_EINT(27),
 };
-static struct wm831x_pdata crag_pmic_pdata __devinitdata = {
+static struct wm831x_pdata crag_pmic_pdata = {
        .wm831x_num = 1,
        .gpio_base = BANFF_PMIC_GPIO_BASE,
        .soft_shutdown = true,
@@ -601,7 +601,7 @@ static struct wm831x_pdata crag_pmic_pdata __devinitdata = {
        .touch = &touch_pdata,
 };
-static struct i2c_board_info i2c_devs0[] __devinitdata = {
+static struct i2c_board_info i2c_devs0[] = {
        { I2C_BOARD_INFO("24c08", 0x50), },
        { I2C_BOARD_INFO("tca6408", 0x20),
          .platform_data = &crag6410_pca_data,
@@ -616,13 +616,13 @@ static struct s3c2410_platform_i2c i2c0_pdata = {
        .frequency = 400000,
 };
-static struct regulator_consumer_supply pvdd_1v2_consumers[] __devinitdata = {
+static struct regulator_consumer_supply pvdd_1v2_consumers[] = {
        REGULATOR_SUPPLY("DCVDD", "spi0.0"),
        REGULATOR_SUPPLY("AVDD", "spi0.0"),
        REGULATOR_SUPPLY("AVDD", "spi0.1"),
 };
-static struct regulator_init_data pvdd_1v2 __devinitdata = {
+static struct regulator_init_data pvdd_1v2 = {
        .constraints = {
                .name = "PVDD_1V2",
                .valid_ops_mask = REGULATOR_CHANGE_STATUS,
@@ -632,7 +632,7 @@ static struct regulator_init_data pvdd_1v2 __devinitdata = {
        .num_consumer_supplies = ARRAY_SIZE(pvdd_1v2_consumers),
 };
-static struct regulator_consumer_supply pvdd_1v8_consumers[] __devinitdata = {
+static struct regulator_consumer_supply pvdd_1v8_consumers[] = {
        REGULATOR_SUPPLY("LDOVDD", "1-001a"),
        REGULATOR_SUPPLY("PLLVDD", "1-001a"),
        REGULATOR_SUPPLY("DBVDD", "1-001a"),
@@ -664,7 +664,7 @@ static struct regulator_consumer_supply pvdd_1v8_consumers[] __devinitdata = {
        REGULATOR_SUPPLY("CPVDD", "wm5110-codec"),
 };
-static struct regulator_init_data pvdd_1v8 __devinitdata = {
+static struct regulator_init_data pvdd_1v8 = {
        .constraints = {
                .name = "PVDD_1V8",
                .always_on = 1,
@@ -674,12 +674,12 @@ static struct regulator_init_data pvdd_1v8 __devinitdata = {
        .num_consumer_supplies = ARRAY_SIZE(pvdd_1v8_consumers),
 };
-static struct regulator_consumer_supply pvdd_3v3_consumers[] __devinitdata = {
+static struct regulator_consumer_supply pvdd_3v3_consumers[] = {
        REGULATOR_SUPPLY("MICVDD", "1-001a"),
        REGULATOR_SUPPLY("AVDD1", "1-001a"),
 };
-static struct regulator_init_data pvdd_3v3 __devinitdata = {
+static struct regulator_init_data pvdd_3v3 = {
        .constraints = {
                .name = "PVDD_3V3",
                .always_on = 1,
@@ -689,7 +689,7 @@ static struct regulator_init_data pvdd_3v3 __devinitdata = {
        .num_consumer_supplies = ARRAY_SIZE(pvdd_3v3_consumers),
 };
-static struct wm831x_pdata glenfarclas_pmic_pdata __devinitdata = {
+static struct wm831x_pdata glenfarclas_pmic_pdata = {
        .wm831x_num = 2,
        .irq_base = GLENFARCLAS_PMIC_IRQ_BASE,
        .gpio_base = GLENFARCLAS_PMIC_GPIO_BASE,
@@ -721,7 +721,7 @@ static struct wm1250_ev1_pdata wm1250_ev1_pdata = {
        },
 };
-static struct i2c_board_info i2c_devs1[] __devinitdata = {
+static struct i2c_board_info i2c_devs1[] = {
        { I2C_BOARD_INFO("wm8311", 0x34),
          .irq = S3C_EINT(0),
          .platform_data = &glenfarclas_pmic_pdata },
diff --git a/arch/arm/mach-s3c64xx/pm.c b/arch/arm/mach-s3c64xx/pm.c
index 7feb426fc202..d2e1a16690bd 100644
--- a/arch/arm/mach-s3c64xx/pm.c
+++ b/arch/arm/mach-s3c64xx/pm.c
@@ -338,8 +338,10 @@ int __init s3c64xx_pm_init(void)
        for (i = 0; i < ARRAY_SIZE(s3c64xx_pm_domains); i++)
                pm_genpd_init(&s3c64xx_pm_domains[i]->pd, NULL, false);
+#ifdef CONFIG_S3C_DEV_FB
        if (dev_get_platdata(&s3c_device_fb.dev))
                pm_genpd_add_device(&s3c64xx_pm_f.pd, &s3c_device_fb.dev);
+#endif
        return 0;
 }
diff --git a/arch/arm/mach-sa1100/jornada720_ssp.c b/arch/arm/mach-sa1100/jornada720_ssp.c
index 7f07f08d8968..b143c4659346 100644
--- a/arch/arm/mach-sa1100/jornada720_ssp.c
+++ b/arch/arm/mach-sa1100/jornada720_ssp.c
@@ -130,7 +130,7 @@ void jornada_ssp_end(void)
 };
 EXPORT_SYMBOL(jornada_ssp_end);
-static int __devinit jornada_ssp_probe(struct platform_device *dev)
+static int jornada_ssp_probe(struct platform_device *dev)
 {
        int ret;
diff --git a/arch/arm/mach-sa1100/neponset.c b/arch/arm/mach-sa1100/neponset.c
index 88be0474f3d7..400f80332046 100644
--- a/arch/arm/mach-sa1100/neponset.c
+++ b/arch/arm/mach-sa1100/neponset.c
@@ -154,7 +154,7 @@ static u_int neponset_get_mctrl(struct uart_port *port)
        return ret;
 }
-static struct sa1100_port_fns neponset_port_fns __devinitdata = {
+static struct sa1100_port_fns neponset_port_fns = {
        .set_mctrl      = neponset_set_mctrl,
        .get_mctrl      = neponset_get_mctrl,
 };
@@ -233,7 +233,7 @@ static struct sa1111_platform_data sa1111_info = {
        .disable_devs   = SA1111_DEVID_PS2_MSE,
 };
-static int __devinit neponset_probe(struct platform_device *dev)
+static int neponset_probe(struct platform_device *dev)
 {
        struct neponset_drvdata *d;
        struct resource *nep_res, *sa1111_res, *smc91x_res;
@@ -368,7 +368,7 @@ static int __devinit neponset_probe(struct platform_device *dev)
        return ret;
 }
-static int __devexit neponset_remove(struct platform_device *dev)
+static int neponset_remove(struct platform_device *dev)
 {
        struct neponset_drvdata *d = platform_get_drvdata(dev);
        int irq = platform_get_irq(dev, 0);
@@ -420,7 +420,7 @@ static const struct dev_pm_ops neponset_pm_ops = {
 static struct platform_driver neponset_device_driver = {
        .probe          = neponset_probe,
-        .remove         = __devexit_p(neponset_remove),
+        .remove         = neponset_remove,
        .driver         = {
                .name   = "neponset",
                .owner  = THIS_MODULE,
diff --git a/arch/arm/mach-sunxi/sunxi.c b/arch/arm/mach-sunxi/sunxi.c
index cba4cd3bf93a..6980cfa646f9 100644
--- a/arch/arm/mach-sunxi/sunxi.c
+++ b/arch/arm/mach-sunxi/sunxi.c
@@ -80,8 +80,8 @@ static void __init sunxi_dt_init(void)
 }
 static const char * const sunxi_board_dt_compat[] = {
-        "allwinner,sun4i",
+        "allwinner,sun4i-a10",
-        "allwinner,sun5i",
+        "allwinner,sun5i-a13",
        NULL,
 };
diff --git a/arch/arm/mach-tegra/pcie.c b/arch/arm/mach-tegra/pcie.c
index 53d085871798..bffcd643d7a3 100644
--- a/arch/arm/mach-tegra/pcie.c
+++ b/arch/arm/mach-tegra/pcie.c
@@ -331,7 +331,7 @@ static struct pci_ops tegra_pcie_ops = {
        .write  = tegra_pcie_write_conf,
 };
-static void __devinit tegra_pcie_fixup_bridge(struct pci_dev *dev)
+static void tegra_pcie_fixup_bridge(struct pci_dev *dev)
 {
        u16 reg;
@@ -345,7 +345,7 @@ static void __devinit tegra_pcie_fixup_bridge(struct pci_dev *dev)
 DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, tegra_pcie_fixup_bridge);
 /* Tegra PCIE root complex wrongly reports device class */
-static void __devinit tegra_pcie_fixup_class(struct pci_dev *dev)
+static void tegra_pcie_fixup_class(struct pci_dev *dev)
 {
        dev->class = PCI_CLASS_BRIDGE_PCI << 8;
 }
@@ -353,7 +353,7 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_NVIDIA, 0x0bf0, tegra_pcie_fixup_class);
 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_NVIDIA, 0x0bf1, tegra_pcie_fixup_class);
 /* Tegra PCIE requires relaxed ordering */
-static void __devinit tegra_pcie_relax_enable(struct pci_dev *dev)
+static void tegra_pcie_relax_enable(struct pci_dev *dev)
 {
        pcie_capability_set_word(dev, PCI_EXP_DEVCTL, PCI_EXP_DEVCTL_RELAX_EN);
 }
diff --git a/arch/arm/mach-tegra/tegra2_emc.c b/arch/arm/mach-tegra/tegra2_emc.c
index 837c7b9ea63b..e18aa2f83ebf 100644
--- a/arch/arm/mach-tegra/tegra2_emc.c
+++ b/arch/arm/mach-tegra/tegra2_emc.c
@@ -268,7 +268,7 @@ static struct tegra_emc_pdata *tegra_emc_dt_parse_pdata(
 }
 #endif
-static struct tegra_emc_pdata __devinit *tegra_emc_fill_pdata(struct platform_device *pdev)
+static struct tegra_emc_pdata *tegra_emc_fill_pdata(struct platform_device *pdev)
 {
        struct clk *c = clk_get_sys(NULL, "emc");
        struct tegra_emc_pdata *pdata;
@@ -296,7 +296,7 @@ static struct tegra_emc_pdata __devinit *tegra_emc_fill_pdata(struct platform_de
        return pdata;
 }
-static int __devinit tegra_emc_probe(struct platform_device *pdev)
+static int tegra_emc_probe(struct platform_device *pdev)
 {
        struct tegra_emc_pdata *pdata;
        struct resource *res;
@@ -333,7 +333,7 @@ static int __devinit tegra_emc_probe(struct platform_device *pdev)
        return 0;
 }
-static struct of_device_id tegra_emc_of_match[] __devinitdata = {
+static struct of_device_id tegra_emc_of_match[] = {
        { .compatible = "nvidia,tegra20-emc", },
        { },
 };
diff --git a/arch/arm/mach-u300/dummyspichip.c b/arch/arm/mach-u300/dummyspichip.c
index 03f793612594..2785cb67b5e8 100644
--- a/arch/arm/mach-u300/dummyspichip.c
+++ b/arch/arm/mach-u300/dummyspichip.c
@@ -222,7 +222,7 @@ static ssize_t dummy_looptest(struct device *dev,
 static DEVICE_ATTR(looptest, S_IRUGO, dummy_looptest, NULL);
-static int __devinit pl022_dummy_probe(struct spi_device *spi)
+static int pl022_dummy_probe(struct spi_device *spi)
 {
        struct dummy *p_dummy;
        int status;
@@ -251,7 +251,7 @@ out_dev_create_looptest_failed:
        return status;
 }
-static int __devexit pl022_dummy_remove(struct spi_device *spi)
+static int pl022_dummy_remove(struct spi_device *spi)
 {
        struct dummy *p_dummy = dev_get_drvdata(&spi->dev);
@@ -269,7 +269,7 @@ static struct spi_driver pl022_dummy_driver = {
                .owner  = THIS_MODULE,
        },
        .probe  = pl022_dummy_probe,
-        .remove = __devexit_p(pl022_dummy_remove),
+        .remove = pl022_dummy_remove,
 };
 static int __init pl022_init_dummy(void)
diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c
index 7875d3c85df1..c1fb38b5ed97 100644
--- a/arch/arm/mach-ux500/cpu-db8500.c
+++ b/arch/arm/mach-ux500/cpu-db8500.c
@@ -285,7 +285,8 @@ static struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = {
        OF_DEV_AUXDATA("st,nomadik-i2c", 0x80110000, "nmk-i2c.3", NULL),
        OF_DEV_AUXDATA("st,nomadik-i2c", 0x8012a000, "nmk-i2c.4", NULL),
        /* Requires device name bindings. */
-        OF_DEV_AUXDATA("stericsson,nmk_pinctrl", 0, "pinctrl-db8500", NULL),
+        OF_DEV_AUXDATA("stericsson,nmk_pinctrl", U8500_PRCMU_BASE,
+                "pinctrl-db8500", NULL),
        /* Requires clock name and DMA bindings. */
        OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80123000,
                "ux500-msp-i2s.0", &msp0_platform_data),
diff --git a/arch/arm/mach-versatile/include/mach/irqs.h b/arch/arm/mach-versatile/include/mach/irqs.h
index bf44c61bd1f6..0fd771ca617b 100644
--- a/arch/arm/mach-versatile/include/mach/irqs.h
+++ b/arch/arm/mach-versatile/include/mach/irqs.h
@@ -25,7 +25,7 @@
 *  IRQ interrupts definitions are the same as the INT definitions
 *  held within platform.h
 */
-#define IRQ_VIC_START           0
+#define IRQ_VIC_START           32
 #define IRQ_WDOGINT             (IRQ_VIC_START + INT_WDOGINT)
 #define IRQ_SOFTINT             (IRQ_VIC_START + INT_SOFTINT)
 #define IRQ_COMMRx              (IRQ_VIC_START + INT_COMMRx)
@@ -100,7 +100,7 @@
 /*
 * Secondary interrupt controller
 */
-#define IRQ_SIC_START           32
+#define IRQ_SIC_START           64
 #define IRQ_SIC_MMCI0B          (IRQ_SIC_START + SIC_INT_MMCI0B)
 #define IRQ_SIC_MMCI1B          (IRQ_SIC_START + SIC_INT_MMCI1B)
 #define IRQ_SIC_KMI0            (IRQ_SIC_START + SIC_INT_KMI0)
@@ -120,7 +120,7 @@
 #define IRQ_SIC_PCI1            (IRQ_SIC_START + SIC_INT_PCI1)
 #define IRQ_SIC_PCI2            (IRQ_SIC_START + SIC_INT_PCI2)
 #define IRQ_SIC_PCI3            (IRQ_SIC_START + SIC_INT_PCI3)
-#define IRQ_SIC_END             63
+#define IRQ_SIC_END             95
 #define IRQ_GPIO0_START         (IRQ_SIC_END + 1)
 #define IRQ_GPIO0_END           (IRQ_GPIO0_START + 31)
diff --git a/arch/arm/mach-vexpress/Kconfig b/arch/arm/mach-vexpress/Kconfig
index 99e63f5f99d1..52d315b792c8 100644
--- a/arch/arm/mach-vexpress/Kconfig
+++ b/arch/arm/mach-vexpress/Kconfig
@@ -42,7 +42,6 @@ config ARCH_VEXPRESS_CORTEX_A5_A9_ERRATA
        bool "Enable A5 and A9 only errata work-arounds"
        default y
        select ARM_ERRATA_720789
-        select ARM_ERRATA_751472
        select PL310_ERRATA_753970 if CACHE_PL310
        help
          Provides common dependencies for Versatile Express platforms
diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c
index 6911b8b2745c..c2f37390308a 100644
--- a/arch/arm/mm/cache-l2x0.c
+++ b/arch/arm/mm/cache-l2x0.c
@@ -352,7 +352,8 @@ void __init l2x0_init(void __iomem *base, u32 aux_val, u32 aux_mask)
                /* Unmapped register. */
                sync_reg_offset = L2X0_DUMMY_REG;
 #endif
-                outer_cache.set_debug = pl310_set_debug;
+                if ((cache_id & L2X0_CACHE_ID_RTL_MASK) <= L2X0_CACHE_ID_RTL_R3P0)
+                        outer_cache.set_debug = pl310_set_debug;
                break;
        case L2X0_CACHE_ID_PART_L210:
                ways = (aux >> 13) & 0xf;
@@ -459,8 +460,8 @@ static void aurora_pa_range(unsigned long start, unsigned long end,
        unsigned long flags;
        raw_spin_lock_irqsave(&l2x0_lock, flags);
-        writel(start, l2x0_base + AURORA_RANGE_BASE_ADDR_REG);
+        writel_relaxed(start, l2x0_base + AURORA_RANGE_BASE_ADDR_REG);
-        writel(end, l2x0_base + offset);
+        writel_relaxed(end, l2x0_base + offset);
        raw_spin_unlock_irqrestore(&l2x0_lock, flags);
        cache_sync();
@@ -505,15 +506,21 @@ static void aurora_clean_range(unsigned long start, unsigned long end)
 static void aurora_flush_range(unsigned long start, unsigned long end)
 {
-        if (!l2_wt_override) {
+        start &= ~(CACHE_LINE_SIZE - 1);
-                start &= ~(CACHE_LINE_SIZE - 1);
+        end = ALIGN(end, CACHE_LINE_SIZE);
-                end = ALIGN(end, CACHE_LINE_SIZE);
+        while (start != end) {
-                while (start != end) {
+                unsigned long range_end = calc_range_end(start, end);
-                        unsigned long range_end = calc_range_end(start, end);
+                /*
+                 * If L2 is forced to WT, the L2 will always be clean and we
+                 * just need to invalidate.
+                 */
+                if (l2_wt_override)
                        aurora_pa_range(start, range_end - CACHE_LINE_SIZE,
-                                        AURORA_FLUSH_RANGE_REG);
+                                                        AURORA_INVAL_RANGE_REG);
-                        start = range_end;
+                else
-                }
+                        aurora_pa_range(start, range_end - CACHE_LINE_SIZE,
+                                                        AURORA_FLUSH_RANGE_REG);
+                start = range_end;
        }
 }
@@ -668,8 +675,9 @@ static void pl310_resume(void)
 static void aurora_resume(void)
 {
        if (!(readl(l2x0_base + L2X0_CTRL) & L2X0_CTRL_EN)) {
-                writel(l2x0_saved_regs.aux_ctrl, l2x0_base + L2X0_AUX_CTRL);
+                writel_relaxed(l2x0_saved_regs.aux_ctrl,
-                writel(l2x0_saved_regs.ctrl, l2x0_base + L2X0_CTRL);
+                                l2x0_base + L2X0_AUX_CTRL);
+                writel_relaxed(l2x0_saved_regs.ctrl, l2x0_base + L2X0_CTRL);
        }
 }
diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c
index 6b2fb87c8698..076c26d43864 100644
--- a/arch/arm/mm/dma-mapping.c
+++ b/arch/arm/mm/dma-mapping.c
@@ -774,25 +774,27 @@ static void dma_cache_maint_page(struct page *page, unsigned long offset,
        size_t size, enum dma_data_direction dir,
        void (*op)(const void *, size_t, int))
 {
+        unsigned long pfn;
+        size_t left = size;
+        pfn = page_to_pfn(page) + offset / PAGE_SIZE;
+        offset %= PAGE_SIZE;
        /*
         * A single sg entry may refer to multiple physically contiguous
         * pages.  But we still need to process highmem pages individually.
         * If highmem is not configured then the bulk of this loop gets
         * optimized out.
         */
-        size_t left = size;
        do {
                size_t len = left;
                void *vaddr;
+                page = pfn_to_page(pfn);
                if (PageHighMem(page)) {
-                        if (len + offset > PAGE_SIZE) {
+                        if (len + offset > PAGE_SIZE)
-                                if (offset >= PAGE_SIZE) {
-                                        page += offset / PAGE_SIZE;
-                                        offset %= PAGE_SIZE;
-                                }
                                len = PAGE_SIZE - offset;
-                        }
                        vaddr = kmap_high_get(page);
                        if (vaddr) {
                                vaddr += offset;
@@ -809,7 +811,7 @@ static void dma_cache_maint_page(struct page *page, unsigned long offset,
                        op(vaddr, len, dir);
                }
                offset = 0;
-                page++;
+                pfn++;
                left -= len;
        } while (left);
 }
diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index 9f0610243bd6..ce328c7f5c94 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -283,7 +283,7 @@ static struct mem_type mem_types[] = {
        },
        [MT_MEMORY_SO] = {
                .prot_pte  = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
-                                L_PTE_MT_UNCACHED,
+                                L_PTE_MT_UNCACHED | L_PTE_XN,
                .prot_l1   = PMD_TYPE_TABLE,
                .prot_sect = PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_SECT_S |
                                PMD_SECT_UNCACHED | PMD_SECT_XN,
diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S
index 350f6a74992b..3a3c015f8d5c 100644
--- a/arch/arm/mm/proc-v7.S
+++ b/arch/arm/mm/proc-v7.S
@@ -169,6 +169,7 @@ __v7_ca15mp_setup:
        orreq   r0, r0, r10                     @ Enable CPU-specific SMP bits
        mcreq   p15, 0, r0, c1, c0, 1
 #endif
+        b       __v7_setup
 __v7_pj4b_setup:
 #ifdef CONFIG_CPU_PJ4B
@@ -245,7 +246,8 @@ __v7_setup:
        ldr     r10, =0x00000c08                @ Cortex-A8 primary part number
        teq     r0, r10
        bne     2f
-#ifdef CONFIG_ARM_ERRATA_430973
+#if defined(CONFIG_ARM_ERRATA_430973) && !defined(CONFIG_ARCH_MULTIPLATFORM)
        teq     r5, #0x00100000                 @ only present in r1p*
        mrceq   p15, 0, r10, c1, c0, 1          @ read aux control register
        orreq   r10, r10, #(1 << 6)             @ set IBE to 1
diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile
index 9d9aa2f55129..a14a78a2f149 100644
--- a/arch/arm/plat-omap/Makefile
+++ b/arch/arm/plat-omap/Makefile
@@ -3,7 +3,7 @@
 #
 # Common support
-obj-y := sram.o dma.o fb.o counter_32k.o
+obj-y := sram.o dma.o counter_32k.o
 obj-m :=
 obj-n :=
 obj-  :=
diff --git a/arch/arm/plat-omap/counter_32k.c b/arch/arm/plat-omap/counter_32k.c
index f3771cdb9838..5b0b86bb34bb 100644
--- a/arch/arm/plat-omap/counter_32k.c
+++ b/arch/arm/plat-omap/counter_32k.c
@@ -22,6 +22,8 @@
 #include <asm/mach/time.h>
 #include <asm/sched_clock.h>
+#include <plat/counter-32k.h>
 /* OMAP2_32KSYNCNT_CR_OFF: offset of 32ksync counter register */
 #define OMAP2_32KSYNCNT_REV_OFF         0x0
 #define OMAP2_32KSYNCNT_REV_SCHEME      (0x3 << 30)
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index 37a488aaa2ba..4136b20cba3c 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -2000,7 +2000,7 @@ void omap_dma_global_context_restore(void)
                        omap_clear_dma(ch);
 }
-static int __devinit omap_system_dma_probe(struct platform_device *pdev)
+static int omap_system_dma_probe(struct platform_device *pdev)
 {
        int ch, ret = 0;
        int dma_irq;
@@ -2116,7 +2116,7 @@ exit_dma_lch_fail:
        return ret;
 }
-static int __devexit omap_system_dma_remove(struct platform_device *pdev)
+static int omap_system_dma_remove(struct platform_device *pdev)
 {
        int dma_irq;
@@ -2140,7 +2140,7 @@ static int __devexit omap_system_dma_remove(struct platform_device *pdev)
 static struct platform_driver omap_system_dma_driver = {
        .probe          = omap_system_dma_probe,
-        .remove         = __devexit_p(omap_system_dma_remove),
+        .remove         = omap_system_dma_remove,
        .driver         = {
                .name   = "omap_dma_system"
        },
diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c
index 89585c293554..7b433f3bddca 100644
--- a/arch/arm/plat-omap/dmtimer.c
+++ b/arch/arm/plat-omap/dmtimer.c
@@ -777,7 +777,7 @@ EXPORT_SYMBOL_GPL(omap_dm_timers_active);
 * Called by driver framework at the end of device registration for all
 * timer devices.
 */
-static int __devinit omap_dm_timer_probe(struct platform_device *pdev)
+static int omap_dm_timer_probe(struct platform_device *pdev)
 {
        unsigned long flags;
        struct omap_dm_timer *timer;
@@ -864,7 +864,7 @@ static int __devinit omap_dm_timer_probe(struct platform_device *pdev)
 * In addition to freeing platform resources it also deletes the timer
 * entry from the local list.
 */
-static int __devexit omap_dm_timer_remove(struct platform_device *pdev)
+static int omap_dm_timer_remove(struct platform_device *pdev)
 {
        struct omap_dm_timer *timer;
        unsigned long flags;
@@ -891,26 +891,15 @@ MODULE_DEVICE_TABLE(of, omap_timer_match);
 static struct platform_driver omap_dm_timer_driver = {
        .probe  = omap_dm_timer_probe,
-        .remove = __devexit_p(omap_dm_timer_remove),
+        .remove = omap_dm_timer_remove,
        .driver = {
                .name   = "omap_timer",
                .of_match_table = of_match_ptr(omap_timer_match),
        },
 };
-static int __init omap_dm_timer_driver_init(void)
-{
-        return platform_driver_register(&omap_dm_timer_driver);
-}
-static void __exit omap_dm_timer_driver_exit(void)
-{
-        platform_driver_unregister(&omap_dm_timer_driver);
-}
 early_platform_init("earlytimer", &omap_dm_timer_driver);
-module_init(omap_dm_timer_driver_init);
+module_platform_driver(omap_dm_timer_driver);
-module_exit(omap_dm_timer_driver_exit);
 MODULE_DESCRIPTION("OMAP Dual-Mode Timer Driver");
 MODULE_LICENSE("GPL");
diff --git a/arch/arm/plat-omap/include/plat/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h
index b4516aba67ed..c9a66bf36c9a 100644
--- a/arch/arm/plat-omap/include/plat/cpu.h
+++ b/arch/arm/plat-omap/include/plat/cpu.h
@@ -32,8 +32,4 @@
 #include <mach/soc.h>
 #endif
-#ifdef CONFIG_ARCH_OMAP2PLUS
-#include "../../mach-omap2/soc.h"
-#endif
 #endif
diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
index 743fc2836f7a..a5bc92d7e476 100644
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -26,6 +26,8 @@
 #include <asm/mach/map.h>
+#include <plat/sram.h>
 #define ROUND_DOWN(value,boundary)      ((value) & (~((boundary)-1)))
 static void __iomem *omap_sram_base;
diff --git a/arch/arm/plat-orion/mpp.c b/arch/arm/plat-orion/mpp.c
index e686fe76a96b..7310bcfb299f 100644
--- a/arch/arm/plat-orion/mpp.c
+++ b/arch/arm/plat-orion/mpp.c
@@ -49,7 +49,7 @@ void __init orion_mpp_conf(unsigned int *mpp_list, unsigned int variant_mask,
                                        "number (%u)\n", num);
                        continue;
                }
-                if (variant_mask & !(*mpp_list & variant_mask)) {
+                if (variant_mask && !(*mpp_list & variant_mask)) {
                        printk(KERN_WARNING
                               "orion_mpp_conf: requested MPP%u config "
                               "unavailable on this hardware\n", num);
diff --git a/arch/arm/plat-pxa/ssp.c b/arch/arm/plat-pxa/ssp.c
index 584c9bf8ed2d..8e11e96eab5e 100644
--- a/arch/arm/plat-pxa/ssp.c
+++ b/arch/arm/plat-pxa/ssp.c
@@ -72,7 +72,7 @@ void pxa_ssp_free(struct ssp_device *ssp)
 }
 EXPORT_SYMBOL(pxa_ssp_free);
-static int __devinit pxa_ssp_probe(struct platform_device *pdev)
+static int pxa_ssp_probe(struct platform_device *pdev)
 {
        const struct platform_device_id *id = platform_get_device_id(pdev);
        struct resource *res;
@@ -164,7 +164,7 @@ err_free:
        return ret;
 }
-static int __devexit pxa_ssp_remove(struct platform_device *pdev)
+static int pxa_ssp_remove(struct platform_device *pdev)
 {
        struct resource *res;
        struct ssp_device *ssp;
@@ -199,7 +199,7 @@ static const struct platform_device_id ssp_id_table[] = {
 static struct platform_driver pxa_ssp_driver = {
        .probe          = pxa_ssp_probe,
-        .remove         = __devexit_p(pxa_ssp_remove),
+        .remove         = pxa_ssp_remove,
        .driver         = {
                .owner  = THIS_MODULE,
                .name   = "pxa2xx-ssp",
diff --git a/arch/arm/plat-samsung/adc.c b/arch/arm/plat-samsung/adc.c
index 37542c2689a2..2d676ab50f73 100644
--- a/arch/arm/plat-samsung/adc.c
+++ b/arch/arm/plat-samsung/adc.c
@@ -416,7 +416,7 @@ static int s3c_adc_probe(struct platform_device *pdev)
        return 0;
 }
-static int __devexit s3c_adc_remove(struct platform_device *pdev)
+static int s3c_adc_remove(struct platform_device *pdev)
 {
        struct adc_device *adc = platform_get_drvdata(pdev);
@@ -516,7 +516,7 @@ static struct platform_driver s3c_adc_driver = {
                .pm     = &adc_pm_ops,
        },
        .probe          = s3c_adc_probe,
-        .remove         = __devexit_p(s3c_adc_remove),
+        .remove         = s3c_adc_remove,
 };
 static int __init adc_init(void)
diff --git a/arch/arm/plat-samsung/include/plat/cpu.h b/arch/arm/plat-samsung/include/plat/cpu.h
index e0667a1c137c..37703ef6dfc7 100644
--- a/arch/arm/plat-samsung/include/plat/cpu.h
+++ b/arch/arm/plat-samsung/include/plat/cpu.h
@@ -43,7 +43,7 @@ extern unsigned long samsung_cpu_id;
 #define EXYNOS4_CPU_MASK        0xFFFE0000
 #define EXYNOS5250_SOC_ID       0x43520000
-#define EXYNOS5440_SOC_ID       0x54400000
+#define EXYNOS5440_SOC_ID       0xE5440000
 #define EXYNOS5_SOC_MASK        0xFFFFF000
 #define IS_SAMSUNG_CPU(name, id, mask)          \
diff --git a/arch/arm/plat-versatile/headsmp.S b/arch/arm/plat-versatile/headsmp.S
index dd703ef09b8d..b178d44e9eaa 100644
--- a/arch/arm/plat-versatile/headsmp.S
+++ b/arch/arm/plat-versatile/headsmp.S
@@ -20,7 +20,7 @@
 */
 ENTRY(versatile_secondary_startup)
        mrc     p15, 0, r0, c0, c0, 5
-        and     r0, r0, #15
+        bic     r0, #0xff000000
        adr     r4, 1f
        ldmia   r4, {r5, r6}
        sub     r4, r4, r5
diff --git a/arch/arm/vfp/entry.S b/arch/arm/vfp/entry.S
index cc926c985981..323ce1a62bbf 100644
--- a/arch/arm/vfp/entry.S
+++ b/arch/arm/vfp/entry.S
@@ -22,7 +22,7 @@
 @  IRQs disabled.
 @
 ENTRY(do_vfp)
-#ifdef CONFIG_PREEMPT
+#ifdef CONFIG_PREEMPT_COUNT
        ldr     r4, [r10, #TI_PREEMPT]  @ get preempt count
        add     r11, r4, #1             @ increment it
        str     r11, [r10, #TI_PREEMPT]
@@ -35,7 +35,7 @@ ENTRY(do_vfp)
 ENDPROC(do_vfp)
 ENTRY(vfp_null_entry)
-#ifdef CONFIG_PREEMPT
+#ifdef CONFIG_PREEMPT_COUNT
        get_thread_info r10
        ldr     r4, [r10, #TI_PREEMPT]  @ get preempt count
        sub     r11, r4, #1             @ decrement it
@@ -53,7 +53,7 @@ ENDPROC(vfp_null_entry)
        __INIT
 ENTRY(vfp_testing_entry)
-#ifdef CONFIG_PREEMPT
+#ifdef CONFIG_PREEMPT_COUNT
        get_thread_info r10
        ldr     r4, [r10, #TI_PREEMPT]  @ get preempt count
        sub     r11, r4, #1             @ decrement it
diff --git a/arch/arm/vfp/vfphw.S b/arch/arm/vfp/vfphw.S
index ea0349f63586..dd5e56f95f3f 100644
--- a/arch/arm/vfp/vfphw.S
+++ b/arch/arm/vfp/vfphw.S
@@ -168,7 +168,7 @@ vfp_hw_state_valid:
                                        @ else it's one 32-bit instruction, so
                                        @ always subtract 4 from the following
                                        @ instruction address.
-#ifdef CONFIG_PREEMPT
+#ifdef CONFIG_PREEMPT_COUNT
        get_thread_info r10
        ldr     r4, [r10, #TI_PREEMPT]  @ get preempt count
        sub     r11, r4, #1             @ decrement it
@@ -192,7 +192,7 @@ look_for_VFP_exceptions:
        @ not recognised by VFP
        DBGSTR  "not VFP"
-#ifdef CONFIG_PREEMPT
+#ifdef CONFIG_PREEMPT_COUNT
        get_thread_info r10
        ldr     r4, [r10, #TI_PREEMPT]  @ get preempt count
        sub     r11, r4, #1             @ decrement it