11 files changed, 47 insertions, 24 deletions

diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index e35d54d43e70..2fd88437348b 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -289,13 +289,6 @@ config MACH_NEOCORE926
         help
           Select this if you are using the Adeneo Neocore 926 board.
 
-config MACH_AT91SAM9G20EK_2MMC
-        bool "Atmel AT91SAM9G20-EK Evaluation Kit modified for 2 MMC Slots"
-        depends on ARCH_AT91SAM9G20
-        help
-          Select this if you are using an Atmel AT91SAM9G20-EK Evaluation Kit
-          Rev A or B modified for 2 MMC Slots.
-
 endif
 
 # ----------------------------------------------------------
@@ -322,7 +315,16 @@ config MACH_AT91SAM9G20EK
         bool "Atmel AT91SAM9G20-EK Evaluation Kit"
         depends on ARCH_AT91SAM9G20
         help
-          Select this if you are using Atmel's AT91SAM9G20-EK Evaluation Kit.
+          Select this if you are using Atmel's AT91SAM9G20-EK Evaluation Kit
+          that embeds only one SD/MMC slot.
+
+config MACH_AT91SAM9G20EK_2MMC
+        bool "Atmel AT91SAM9G20-EK Evaluation Kit with 2 SD/MMC Slots"
+        depends on ARCH_AT91SAM9G20
+        help
+          Select this if you are using an Atmel AT91SAM9G20-EK Evaluation Kit
+          with 2 SD/MMC Slots. This is the case for AT91SAM9G20-EK rev. C and
+          onwards.
 
 config MACH_CPU9G20
         bool "Eukrea CPU9G20 board"
@@ -392,7 +394,7 @@ config MTD_AT91_DATAFLASH_CARD
 
 config MTD_NAND_ATMEL_BUSWIDTH_16
         bool "Enable 16-bit data bus interface to NAND flash"
-        depends on (MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9G10EK || MACH_AT91SAM9263EK || MACH_AT91SAM9G20EK || MACH_AT91SAM9G45EKES || MACH_AT91CAP9ADK)
+        depends on (MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9G10EK || MACH_AT91SAM9263EK || MACH_AT91SAM9G20EK || MACH_AT91SAM9G20EK_2MMC || MACH_AT91SAM9G45EKES || MACH_AT91CAP9ADK)
         help
           On AT91SAM926x boards both types of NAND flash can be present
           (8 and 16 bit data bus width).
diff --git a/arch/arm/mach-at91/board-sam9g20ek-2slot-mmc.c b/arch/arm/mach-at91/board-sam9g20ek-2slot-mmc.c
index a28e53faf71d..a4102d72cc9b 100644
--- a/arch/arm/mach-at91/board-sam9g20ek-2slot-mmc.c
+++ b/arch/arm/mach-at91/board-sam9g20ek-2slot-mmc.c
@@ -90,7 +90,7 @@ static struct at91_udc_data __initdata ek_udc_data = {
  * SPI devices.
  */
 static struct spi_board_info ek_spi_devices[] = {
-#if !defined(CONFIG_MMC_ATMELMCI)
+#if !(defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_AT91))
         {       /* DataFlash chip */
                 .modalias       = "mtd_dataflash",
                 .chip_select    = 1,
@@ -113,7 +113,7 @@ static struct spi_board_info ek_spi_devices[] = {
  * MACB Ethernet device
  */
 static struct at91_eth_data __initdata ek_macb_data = {
-        .phy_irq_pin    = AT91_PIN_PC12,
+        .phy_irq_pin    = AT91_PIN_PB0,
         .is_rmii        = 1,
 };
 
@@ -194,24 +194,27 @@ static void __init ek_add_device_nand(void)
 
 /*
  * MCI (SD/MMC)
- * det_pin and wp_pin are not connected
+ * wp_pin is not connected
  */
 #if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
 static struct mci_platform_data __initdata ek_mmc_data = {
         .slot[0] = {
                 .bus_width      = 4,
-                .detect_pin     = -ENODEV,
+                .detect_pin     = AT91_PIN_PC2,
                 .wp_pin         = -ENODEV,
         },
         .slot[1] = {
                 .bus_width      = 4,
-                .detect_pin     = -ENODEV,
+                .detect_pin     = AT91_PIN_PC9,
                 .wp_pin         = -ENODEV,
         },
 
 };
 #else
-static struct amci_platform_data __initdata ek_mmc_data = {
+static struct at91_mmc_data __initdata ek_mmc_data = {
+        .slot_b         = 1,    /* Only one slot so use slot B */
+        .wire4          = 1,
+        .det_pin        = AT91_PIN_PC9,
 };
 #endif
 
@@ -221,13 +224,13 @@ static struct amci_platform_data __initdata ek_mmc_data = {
 static struct gpio_led ek_leds[] = {
         {       /* "bottom" led, green, userled1 to be defined */
                 .name                   = "ds5",
-                .gpio                   = AT91_PIN_PB12,
+                .gpio                   = AT91_PIN_PB8,
                 .active_low             = 1,
                 .default_trigger        = "none",
         },
         {       /* "power" led, yellow */
                 .name                   = "ds1",
-                .gpio                   = AT91_PIN_PB13,
+                .gpio                   = AT91_PIN_PB9,
                 .default_trigger        = "heartbeat",
         }
 };
@@ -254,7 +257,11 @@ static void __init ek_board_init(void)
         /* Ethernet */
         at91_add_device_eth(&ek_macb_data);
         /* MMC */
+#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
         at91_add_device_mci(0, &ek_mmc_data);
+#else
+        at91_add_device_mmc(0, &ek_mmc_data);
+#endif
         /* I2C */
         at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices));
         /* LEDs */
diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c
index 7177c4aa6342..242dd0775343 100644
--- a/arch/arm/mach-kirkwood/common.c
+++ b/arch/arm/mach-kirkwood/common.c
@@ -915,6 +915,14 @@ void __init kirkwood_init(void)
         kirkwood_uart0_data[0].uartclk = kirkwood_tclk;
         kirkwood_uart1_data[0].uartclk = kirkwood_tclk;
 
+        /*
+         * Disable propagation of mbus errors to the CPU local bus,
+         * as this causes mbus errors (which can occur for example
+         * for PCI aborts) to throw CPU aborts, which we're not set
+         * up to deal with.
+         */
+        writel(readl(CPU_CONFIG) & ~CPU_CONFIG_ERROR_PROP, CPU_CONFIG);
+
         kirkwood_setup_cpu_mbus();
 
 #ifdef CONFIG_CACHE_FEROCEON_L2
diff --git a/arch/arm/mach-kirkwood/include/mach/bridge-regs.h b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h
index 9e80d9232c83..418f5017c50e 100644
--- a/arch/arm/mach-kirkwood/include/mach/bridge-regs.h
+++ b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h
@@ -13,6 +13,9 @@
 
 #include <mach/kirkwood.h>
 
+#define CPU_CONFIG              (BRIDGE_VIRT_BASE | 0x0100)
+#define CPU_CONFIG_ERROR_PROP   0x00000004
+
 #define CPU_CONTROL             (BRIDGE_VIRT_BASE | 0x0104)
 #define CPU_RESET               0x00000002
 
diff --git a/arch/arm/mach-mmp/include/mach/mfp-pxa910.h b/arch/arm/mach-mmp/include/mach/mfp-pxa910.h
index bf1189ff9a34..7e8a80f25ddc 100644
--- a/arch/arm/mach-mmp/include/mach/mfp-pxa910.h
+++ b/arch/arm/mach-mmp/include/mach/mfp-pxa910.h
@@ -160,7 +160,7 @@
 #define MMC1_WP_MMC1_WP         MFP_CFG_DRV(MMC1_WP, AF0, MEDIUM)
 
 /* PWM */
-#define GPIO27 PWM3 AF2         MFP_CFG(GPIO27, AF2)
+#define GPIO27_PWM3_AF2         MFP_CFG(GPIO27, AF2)
 #define GPIO51_PWM2_OUT         MFP_CFG(GPIO51, AF2)
 #define GPIO117_PWM1_OUT        MFP_CFG(GPIO117, AF2)
 #define GPIO118_PWM2_OUT        MFP_CFG(GPIO118, AF2)
diff --git a/arch/arm/mach-pxa/colibri-pxa320.c b/arch/arm/mach-pxa/colibri-pxa320.c
index 494572825c7d..ec0e14b96682 100644
--- a/arch/arm/mach-pxa/colibri-pxa320.c
+++ b/arch/arm/mach-pxa/colibri-pxa320.c
@@ -27,6 +27,7 @@
 #include <mach/colibri.h>
 #include <mach/pxafb.h>
 #include <mach/ohci.h>
+#include <mach/audio.h>
 
 #include "generic.h"
 #include "devices.h"
@@ -145,7 +146,8 @@ static void __init colibri_pxa320_init_lcd(void)
 static inline void colibri_pxa320_init_lcd(void) {}
 #endif
 
-#if defined(SND_AC97_CODEC) || defined(SND_AC97_CODEC_MODULE)
+#if     defined(CONFIG_SND_AC97_CODEC) || \
+        defined(CONFIG_SND_AC97_CODEC_MODULE)
 static mfp_cfg_t colibri_pxa320_ac97_pin_config[] __initdata = {
         GPIO34_AC97_SYSCLK,
         GPIO35_AC97_SDATA_IN_0,
diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c
index abff9e132749..83bd3c6e3884 100644
--- a/arch/arm/mach-pxa/hx4700.c
+++ b/arch/arm/mach-pxa/hx4700.c
@@ -604,7 +604,7 @@ static struct platform_device gpio_vbus = {
 static const struct ads7846_platform_data tsc2046_info = {
         .model            = 7846,
         .vref_delay_usecs = 100,
-        .pressure_max     = 512,
+        .pressure_max     = 1024,
         .debounce_max     = 10,
         .debounce_tol     = 3,
         .debounce_rep     = 1,
diff --git a/arch/arm/mach-pxa/include/mach/entry-macro.S b/arch/arm/mach-pxa/include/mach/entry-macro.S
index 241880608ac6..a73bc86a3c26 100644
--- a/arch/arm/mach-pxa/include/mach/entry-macro.S
+++ b/arch/arm/mach-pxa/include/mach/entry-macro.S
@@ -46,5 +46,6 @@
                 beq     1001f
                 bic     \irqstat, \irqstat, #0x80000000
                 mov     \irqnr, \irqstat, lsr #16
+                add     \irqnr, \irqnr, #(PXA_IRQ(0))
 1001:
                 .endm
diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c
index be60d6deee8b..653e25be3dd8 100644
--- a/arch/arm/mach-u300/core.c
+++ b/arch/arm/mach-u300/core.c
@@ -408,7 +408,7 @@ static struct platform_device keypad_device = {
 };
 
 static struct platform_device rtc_device = {
-        .name = "rtc0",
+        .name = "rtc-coh901331",
         .id = -1,
         .num_resources = ARRAY_SIZE(rtc_resources),
         .resource = rtc_resources,
diff --git a/arch/arm/plat-pxa/include/plat/mfp.h b/arch/arm/plat-pxa/include/plat/mfp.h
index 22086e696e8e..857a6839071c 100644
--- a/arch/arm/plat-pxa/include/plat/mfp.h
+++ b/arch/arm/plat-pxa/include/plat/mfp.h
@@ -16,7 +16,7 @@
 #ifndef __ASM_PLAT_MFP_H
 #define __ASM_PLAT_MFP_H
 
-#define mfp_to_gpio(m)  ((m) % 128)
+#define mfp_to_gpio(m)  ((m) % 256)
 
 /* list of all the configurable MFP pins */
 enum {
diff --git a/arch/arm/plat-pxa/mfp.c b/arch/arm/plat-pxa/mfp.c
index 9405d0379c85..be58f9fe65b0 100644
--- a/arch/arm/plat-pxa/mfp.c
+++ b/arch/arm/plat-pxa/mfp.c
@@ -207,7 +207,7 @@ unsigned long mfp_read(int mfp)
 {
         unsigned long val, flags;
 
-        BUG_ON(mfp >= MFP_PIN_MAX);
+        BUG_ON(mfp < 0 || mfp >= MFP_PIN_MAX);
 
         spin_lock_irqsave(&mfp_spin_lock, flags);
         val = mfpr_readl(mfp_table[mfp].mfpr_off);
@@ -220,7 +220,7 @@ void mfp_write(int mfp, unsigned long val)
 {
         unsigned long flags;
 
-        BUG_ON(mfp >= MFP_PIN_MAX);
+        BUG_ON(mfp < 0 || mfp >= MFP_PIN_MAX);
 
         spin_lock_irqsave(&mfp_spin_lock, flags);
         mfpr_writel(mfp_table[mfp].mfpr_off, val);